# translation of digikam.po to
# Kevin Attard Compagno The compression value for PNG images:"
" 1: low compression (large file size but short compression duration - "
"default)"
" 5: medium compression"
" 9: high compression (small file size but long compression duration)"
" Note: PNG is always a lossless image compression format."
msgstr ""
#: libs/dimg/loaders/tiffsettings.cpp:67
msgid "Compress TIFF files"
msgstr ""
#: libs/dimg/loaders/tiffsettings.cpp:69
msgid ""
" Toggle compression for TIFF images."
" If you enable this option, you can reduce the final file size of the TIFF "
"image. A lossless compression format (Deflate) is used to save the file."
" "
msgstr ""
#: libs/dimg/loaders/jp2ksettings.cpp:74
msgid "Lossless JPEG 2000 files"
msgstr ""
#: libs/dimg/loaders/jp2ksettings.cpp:76
msgid ""
" Toggle lossless compression for JPEG 2000 images."
" If you enable this option, you will use a lossless method to compress JPEG "
"2000 pictures."
" "
msgstr ""
#: libs/dimg/loaders/jp2ksettings.cpp:82
msgid "JPEG 2000 quality:"
msgstr ""
#: libs/dimg/loaders/jp2ksettings.cpp:84
msgid ""
" The quality value for JPEG 2000 images:"
" 1: low quality (high compression and small file size)"
" 50: medium quality"
" 75: good quality (default)"
" 100: high quality (no compression and large file size)"
" Note: JPEG 2000 is not a lossless image compression format when you use "
"this setting."
msgstr ""
#: libs/dimg/loaders/jpegsettings.cpp:82
msgid "JPEG quality:"
msgstr ""
#: libs/dimg/loaders/jpegsettings.cpp:84
msgid ""
" The JPEG image quality:"
" 1: low quality (high compression and small file size)"
" 50: medium quality"
" 75: good quality (default)"
" 100: high quality (no compression and large file size)"
" Note: JPEG always uses lossy compression."
msgstr ""
#: libs/dimg/loaders/jpegsettings.cpp:93
msgid ""
" JPEG Chroma subsampling level \n"
"(color is saved with less resolution than luminance):"
" None=best: uses 4:4:4 ratio. Does not employ chroma subsampling at "
"all. This preserves edges and contrasting colors, whilst adding no additional "
"compression"
" Medium: uses 4:2:2 ratio. Medium compression: reduces the color "
"resolution by one-third with little to no visual difference"
" High: use 4:1:1 ratio. High compression: suits images with soft edges "
"but tends to alter colors"
" Note: JPEG always uses lossy compression."
msgstr ""
#: libs/imageproperties/imagepropertiessidebardb.cpp:91
msgid "Captions/Tags"
msgstr ""
#: libs/imageproperties/imagepropertiesmetadatatab.cpp:101
msgid "EXIF"
msgstr ""
#: libs/imageproperties/imagepropertiesmetadatatab.cpp:106
msgid "Makernote"
msgstr ""
#: libs/imageproperties/imagepropertiesmetadatatab.cpp:111
msgid "IPTC"
msgstr ""
#: libs/imageproperties/imagepropertiesmetadatatab.cpp:116
msgid "GPS"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:197
msgid "File Properties"
msgstr ""
#: libs/imageproperties/cameraitempropertiestab.cpp:183
#: libs/imageproperties/imagepropertiestab.cpp:198
msgid "File:"
msgstr ""
#: libs/imageproperties/cameraitempropertiestab.cpp:184
#: libs/imageproperties/imagepropertiestab.cpp:199
msgid "Folder:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:200
msgid "Modified:"
msgstr ""
#: libs/imageproperties/cameraitempropertiestab.cpp:186
#: libs/imageproperties/imagepropertiestab.cpp:201
msgid "Size:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:202
msgid "Owner:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:203
msgid "Permissions:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:206
msgid "Image Properties"
msgstr ""
#: libs/imageproperties/cameraitempropertiestab.cpp:189
#: libs/imageproperties/imagepropertiestab.cpp:207
msgid "Type:"
msgstr ""
#: libs/imageproperties/cameraitempropertiestab.cpp:190
#: libs/imageproperties/imagepropertiestab.cpp:208
msgid "Dimensions:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:209
msgid "Compression:"
msgstr ""
#: libs/imageproperties/imagepropertiestab.cpp:210
msgid " You have edited the comment of the image. \n"
" You have edited the comment of %n images. "
msgstr ""
#: libs/imageproperties/imagedescedittab.cpp:413
#, c-format
msgid ""
"_n: You have edited the date of the image. \n"
" You have edited the date of %n images. "
msgstr ""
#: libs/imageproperties/imagedescedittab.cpp:417
#, c-format
msgid ""
"_n: You have edited the rating of the image. \n"
" You have edited the rating of %n images. "
msgstr ""
#: libs/imageproperties/imagedescedittab.cpp:421
#, c-format
msgid ""
"_n: You have edited the tags of the image. \n"
" You have edited the tags of %n images. "
msgstr ""
#: libs/imageproperties/imagedescedittab.cpp:424
#: libs/imageproperties/imagedescedittab.cpp:443
msgid "Do you want to apply your changes? You have edited the metadata of the image: You have edited the metadata of %n images: Select the histogram channel to display here:"
" Luminosity: Display luminosity (perceived brightness) values."
" Red: Display the red image channel."
" Green: Display the green image channel."
" Blue: Display the blue image channel."
" Alpha: Display the alpha image channel. This channel corresponds to "
"the transparency value and is supported by some image formats such as PNG or "
"TIFF."
" Colors: Display all color channel values at the same time."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:147
#: libs/imageproperties/imagepropertiescolorstab.cpp:190
msgid ""
" Select the histogram scale here."
" If the image's maximal values are small, you can use the linear scale."
" Logarithmic scale can be used when the maximal values are big; if it is "
"used, all values (small and large) will be visible on the graph."
msgstr ""
#: digikam/timelineview.cpp:156
#: imageplugins/adjustcurves/adjustcurvestool.cpp:145
#: imageplugins/adjustlevels/adjustlevelstool.cpp:149
#: imageplugins/channelmixer/channelmixertool.cpp:142
#: imageplugins/colorfx/colorfxtool.cpp:126
#: imageplugins/coreplugin/autocorrectiontool.cpp:126
#: imageplugins/coreplugin/bcgtool.cpp:125
#: imageplugins/coreplugin/bwsepiatool.cpp:216
#: imageplugins/coreplugin/hsl/hsltool.cpp:129
#: imageplugins/coreplugin/iccprooftool.cpp:154
#: imageplugins/coreplugin/redeyetool.cpp:126
#: imageplugins/coreplugin/rgbtool.cpp:123
#: imageplugins/whitebalance/whitebalancetool.cpp:145
#: libs/imageproperties/imagepropertiescolorstab.cpp:197
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:198
msgid " Linear"
msgstr ""
#: digikam/timelineview.cpp:164
#: imageplugins/adjustcurves/adjustcurvestool.cpp:153
#: imageplugins/adjustlevels/adjustlevelstool.cpp:157
#: imageplugins/channelmixer/channelmixertool.cpp:150
#: imageplugins/colorfx/colorfxtool.cpp:134
#: imageplugins/coreplugin/autocorrectiontool.cpp:134
#: imageplugins/coreplugin/bcgtool.cpp:133
#: imageplugins/coreplugin/bwsepiatool.cpp:224
#: imageplugins/coreplugin/hsl/hsltool.cpp:137
#: imageplugins/coreplugin/iccprooftool.cpp:162
#: imageplugins/coreplugin/redeyetool.cpp:134
#: imageplugins/coreplugin/rgbtool.cpp:131
#: imageplugins/whitebalance/whitebalancetool.cpp:153
#: libs/imageproperties/imagepropertiescolorstab.cpp:205
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:206
msgid " Logarithmic"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:212
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:213
msgid "Colors:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:219
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:220
msgid ""
" Select the main color displayed with Colors Channel mode here:"
" Red: Draw the red image channel in the foreground."
" Green: Draw the green image channel in the foreground."
" Blue: Draw the blue image channel in the foreground."
" "
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:229
msgid ""
" Select from which region the histogram will be computed here:"
" Full Image: Compute histogram using the full image."
" Selection: Compute histogram using the current image selection."
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:235
msgid " Full Image"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:243
msgid " Selection"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:254
msgid " This is the histogram drawing of the selected image channel"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:264
msgid "Range:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:268
msgid " Select the minimal intensity value of the histogram selection here."
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:272
msgid " Select the maximal intensity value of the histogram selection here."
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:280
msgid "Statistics"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:281
msgid ""
" Here you can see the statistical results calculated from the selected "
"histogram part. These values are available for all channels."
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:285
#: libs/widgets/common/histogramwidget.cpp:951
msgid "Pixels:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:290
#: libs/widgets/common/histogramwidget.cpp:959
msgid "Count:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:295
#: libs/widgets/common/histogramwidget.cpp:947
msgid "Mean:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:300
msgid "Std. deviation:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:305
#: libs/widgets/common/histogramwidget.cpp:963
msgid "Median:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:310
msgid "Percentile:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:315
msgid "Color depth:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:320
msgid "Alpha Channel:"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:337
msgid "Histogram"
msgstr ""
#: libs/imageproperties/imagepropertiescolorstab.cpp:348
msgid "ICC profile"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:110
#: libs/imageproperties/imagepropertiescolorstab.cpp:752
msgid "16 bits"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:106
#: libs/imageproperties/imagepropertiescolorstab.cpp:752
msgid "8 bits"
msgstr ""
#: libs/dialogs/deletedialog.cpp:115
msgid ""
" Using KDcraw library version %1"
" Using Dcraw program version %2"
" %3 models in the list"
msgstr ""
#: libs/dialogs/rawcameradlg.cpp:112
msgid ""
" Using KDcraw library version %1"
" Using LibRaw version %2"
" %3 models in the list"
msgstr ""
#: libs/dialogs/iccprofileinfodlg.cpp:39
msgid "Color Profile Info"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:322
#: libs/dialogs/imagedialog.cpp:198
msgid "Make:"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:324
#: libs/dialogs/imagedialog.cpp:199
msgid "Model:"
msgstr ""
#: digikam/albumfiletip.cpp:449 digikam/albumfiletip.cpp:452
#: libs/dialogs/imagedialog.cpp:200 libs/thumbbar/thumbbar.cpp:1042
#: libs/thumbbar/thumbbar.cpp:1045
msgid "Created:"
msgstr ""
#: libs/dialogs/imagedialog.cpp:201
msgid "Aperture:"
msgstr ""
#: libs/dialogs/imagedialog.cpp:202
msgid "Focal:"
msgstr ""
#: libs/dialogs/imagedialog.cpp:203
msgid "Exposure:"
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:161 libs/dialogs/imagedialog.cpp:204
msgid "Sensitivity:"
msgstr ""
#: libs/dialogs/imagedialog.cpp:284 libs/dialogs/imagedialog.cpp:293
msgid ""
"\n"
"%1|Camera RAW files"
msgstr ""
#: libs/dialogs/imagedialog.cpp:308
msgid "Select an Image"
msgstr ""
#: libs/dialogs/imagedialog.cpp:316
msgid "Select Images"
msgstr ""
#: digikam/digikamapp.cpp:1705
#: libs/greycstoration/greycstorationwidget.cpp:138
#: showfoto/setup/setup.cpp:94
#: utilities/imageeditor/editor/editorwindow.cpp:644
#: utilities/lighttable/lighttablewindow.cpp:1509
msgid "General"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:140
msgid "Detail preservation:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:144
msgid ""
" Preservation of details to set the sharpening level of the small features in "
"the target image. Higher values leave details sharp."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:150
msgid "Anisotropy:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:154
msgid ""
" Anisotropic (directional) modifier of the details. Keep it small for "
"Gaussian noise."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:159
msgid "Smoothing:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:163
msgid ""
" Total smoothing power: if the Detail Factor sets the relative smoothing and "
"the Anisotropy Factor the direction, the Smoothing Factor sets the overall "
"effect."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:169
msgid "Regularity:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:173
msgid ""
" This value controls the evenness of smoothing to the image. Do not use a "
"high value here, or the target image will be completely blurred."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:179
msgid "Iterations:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:182
msgid " Sets the number of times the filter is applied to the image."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:187
msgid "Noise:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:191
msgid " Sets the noise scale."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:200
#: utilities/setup/setupicc.cpp:296
msgid "Advanced Settings"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:202
msgid "Angular step:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:206
msgid ""
" Set here the angular integration step (in degrees) analogous to anisotropy."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:211
msgid "Integral step:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:215
msgid " Set here the spatial integral step."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:219
msgid "Gaussian:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:223
msgid " Set here the precision of the Gaussian function."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:227
msgid "Tile size:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:230
msgid " Sets the tile size."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:234
msgid "Tile border:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:237
msgid " Sets the size of each tile border."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:241
msgid "Interpolation:"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:243
msgid "Nearest Neighbor"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:91
#: libs/greycstoration/greycstorationwidget.cpp:244
msgid "Linear"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:245
msgid "Runge-Kutta"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:246
msgid " Select the right interpolation method for the desired image quality."
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:251
msgid "Fast approximation"
msgstr ""
#: libs/greycstoration/greycstorationwidget.cpp:252
msgid " Enable fast approximation when rendering images."
msgstr ""
#: digikam/albumfiletip.cpp:318 libs/thumbbar/thumbbar.cpp:927
msgid "unavailable"
msgstr ""
#: digikam/albumfiletip.cpp:350 libs/thumbbar/thumbbar.cpp:944
msgid "File Properties"
msgstr ""
#: digikam/albumfiletip.cpp:354 libs/thumbbar/thumbbar.cpp:948
msgid "Name:"
msgstr ""
#: digikam/albumfiletip.cpp:362 libs/thumbbar/thumbbar.cpp:956
msgid "Modified:"
msgstr ""
#: digikam/albumfiletip.cpp:367
#: imageplugins/inserttext/fontchooserwidget.cpp:177
#: libs/thumbbar/thumbbar.cpp:961
msgid "Size:"
msgstr ""
#: digikam/albumfiletip.cpp:404 imageplugins/blurfx/blurfxtool.cpp:80
#: imageplugins/border/bordertool.cpp:85
#: imageplugins/colorfx/colorfxtool.cpp:161
#: imageplugins/distortionfx/distortionfxtool.cpp:95
#: imageplugins/texture/texturetool.cpp:78 libs/thumbbar/thumbbar.cpp:998
msgid "Type:"
msgstr ""
#: digikam/albumfiletip.cpp:413 libs/thumbbar/thumbbar.cpp:1007
msgid "Dimensions:"
msgstr ""
#: digikam/albumfiletip.cpp:433 libs/thumbbar/thumbbar.cpp:1026
msgid "Photograph Properties"
msgstr ""
#: digikam/albumfiletip.cpp:440 libs/thumbbar/thumbbar.cpp:1033
msgid "Make/Model:"
msgstr ""
#: digikam/albumfiletip.cpp:465 libs/thumbbar/thumbbar.cpp:1058
msgid "Aperture/Focal:"
msgstr ""
#: digikam/albumfiletip.cpp:473 libs/thumbbar/thumbbar.cpp:1066
msgid "Exposure/Sensitivity:"
msgstr ""
#: digikam/albumfiletip.cpp:488 libs/thumbbar/thumbbar.cpp:1081
msgid "Mode/Program:"
msgstr ""
#: digikam/albumfiletip.cpp:495 libs/thumbbar/thumbbar.cpp:1088
msgid "Flash:"
msgstr ""
#: digikam/albumfiletip.cpp:502 libs/thumbbar/thumbbar.cpp:1095
msgid "White Balance:"
msgstr ""
#: libs/widgets/metadata/exifwidget.cpp:102
msgid "Standard EXIF Tags"
msgstr ""
#: libs/widgets/metadata/exifwidget.cpp:173
#: libs/widgets/metadata/gpswidget.cpp:313
#: libs/widgets/metadata/iptcwidget.cpp:154
#: libs/widgets/metadata/makernotewidget.cpp:198
msgid "No description available"
msgstr ""
#: libs/widgets/metadata/exifwidget.cpp:180
#: libs/widgets/metadata/gpswidget.cpp:335
#: libs/widgets/metadata/makernotewidget.cpp:205
msgid "EXIF File to Save"
msgstr ""
#: libs/widgets/metadata/exifwidget.cpp:181
#: libs/widgets/metadata/gpswidget.cpp:336
#: libs/widgets/metadata/makernotewidget.cpp:206
msgid "EXIF binary Files (*.exif)"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:113
msgid "Switch the tags view to a simple human-readable list"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:114
msgid "Simple list"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:120
msgid "Switch the tags view to a full list"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:121
msgid "Full list"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:130
msgid "Save metadata to a binary file"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:131
msgid "Save metadata"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:136
msgid "Print metadata to printer"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:137
msgid "Print metadata"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:142
#: libs/widgets/metadata/metadatawidget.cpp:143
msgid "Copy metadata to clipboard"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:274
msgid "File name: %1 (%2)"
msgstr ""
#: libs/widgets/metadata/metadatawidget.cpp:303
msgid " File name: %1 (%2)"
msgstr ""
#: libs/widgets/metadata/makernotewidget.cpp:127
msgid "MakerNote EXIF Tags"
msgstr ""
#: libs/widgets/metadata/iptcwidget.cpp:83
msgid "IPTC Records"
msgstr ""
#: libs/widgets/metadata/iptcwidget.cpp:161
msgid "IPTC File to Save"
msgstr ""
#: libs/widgets/metadata/iptcwidget.cpp:162
msgid "IPTC binary Files (*.iptc)"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:50
msgid "Interoperability"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:51
msgid "Image Information"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:52
#: showfoto/setup/setuptooltip.cpp:127 utilities/setup/setuptooltip.cpp:138
msgid "Photograph Information"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:53
msgid "Global Positioning System"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:54
msgid "Embedded Thumbnail"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:57
msgid "IIM Envelope"
msgstr ""
#: libs/widgets/metadata/mdkeylistviewitem.cpp:58
msgid "IIM Application 2"
msgstr ""
#: libs/widgets/metadata/metadatalistview.cpp:125
msgid "Title: %1 Value: %2 Description: %3"
msgstr ""
#: libs/widgets/metadata/gpswidget.cpp:120
msgid "More Info..."
msgstr ""
#: libs/widgets/metadata/gpswidget.cpp:220
msgid "Global Positioning System Information"
msgstr ""
#: libs/widgets/common/curveswidget.cpp:342
#: libs/widgets/common/histogramwidget.cpp:435
#: libs/widgets/iccprofiles/cietonguewidget.cpp:749
msgid "Loading image..."
msgstr ""
#: libs/widgets/iccprofiles/cietonguewidget.cpp:765
msgid "No profile available..."
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:129
msgid "Name"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:130
msgid "The ICC profile product name"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:131
msgid "Description"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:132
msgid "The ICC profile product description"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:134
msgid "Additional ICC profile information"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:135
msgid "Manufacturer"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:136
msgid "Raw information about the ICC profile manufacturer"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:137
#: utilities/setup/setupcamera.cpp:88
msgid "Model"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:138
msgid "Raw information about the ICC profile model"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:139
msgid "Copyright"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:140
msgid "Raw information about the ICC profile copyright"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:141
msgid "Profile ID"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:142
msgid "The ICC profile ID number"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:143
msgid "Color Space"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:144
msgid "The color space used by the ICC profile"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:145
msgid "Connection Space"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:146
msgid "The connection space used by the ICC profile"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:147
msgid "Device Class"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:148
msgid "The ICC profile device class"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:149
msgid "Rendering Intent"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:150
msgid "The ICC profile rendering intent"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:151
msgid "Profile Version"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:152
msgid "The ICC version used to record the profile"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:153
msgid "CMM Flags"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:154
msgid "The ICC profile color management flags"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:166
msgid ""
" This area contains a CIE or chromaticity diagram. A CIE diagram is a "
"representation of all the colors that a person with normal vision can see. This "
"is represented by the colored sail-shaped area. In addition you will see a "
"triangle that is superimposed on the diagram outlined in white. This triangle "
"represents the outer boundaries of the color space of the device that is "
"characterized by the inspected profile. This is called the device gamut."
" In addition there are black dots and yellow lines on the diagram. Each black "
"dot represents one of the measurement points that were used to create this "
"profile. The yellow line represents the amount that each point is corrected by "
"the profile, and the direction of this correction."
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:201
msgid "ICC Color Profile Information"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:289
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:322
msgid "Lab"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:292
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:325
msgid "Luv"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:295
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:328
msgid "RGB"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:298
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:331
msgid "GRAY"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:301
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:334
msgid "HSV"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:304
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:337
msgid "HLS"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:307
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:340
msgid "CMYK"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:310
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:343
msgid "CMY"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:355
msgid "Input device"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:358
msgid "Display device"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:361
msgid "Output device"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:364
msgid "Color space"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:367
msgid "Link device"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:370
msgid "Abstract"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:373
msgid "Named color"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:385
msgid "Perceptual"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:388
msgid "Relative Colorimetric"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:391
msgid "Saturation"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:394
msgid "Absolute Colorimetric"
msgstr ""
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:434
msgid "ICC color profile File to Save"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:314
#: imageplugins/coreplugin/iccprooftool.cpp:357
#: imageplugins/coreplugin/iccprooftool.cpp:391
#: libs/widgets/iccprofiles/iccprofilewidget.cpp:435
msgid "ICC Files (*.icc; *.icm)"
msgstr ""
#: libs/widgets/common/curveswidget.cpp:345
#: libs/widgets/common/histogramwidget.cpp:438
msgid "Histogram calculation..."
msgstr ""
#: libs/widgets/common/curveswidget.cpp:362
#: libs/widgets/common/histogramwidget.cpp:456
msgid ""
"Histogram\n"
"calculation\n"
"failed."
msgstr ""
#: libs/widgets/common/curveswidget.cpp:577
#: libs/widgets/common/histogramwidget.cpp:914
#, c-format
msgid "x:%1"
msgstr ""
#: libs/widgets/common/histogramwidget.cpp:955
msgid "Std dev.:"
msgstr ""
#: libs/widgets/common/histogramwidget.cpp:967
msgid "Percent:"
msgstr ""
#: libs/widgets/common/dlogoaction.cpp:66 utilities/cameragui/cameraui.cpp:374
msgid "Visit digiKam project website"
msgstr ""
#: digikam/digikamapp.cpp:1046 libs/widgets/common/searchtextbar.h:79
msgid "Search..."
msgstr ""
#: libs/widgets/common/filesaveoptionsbox.cpp:94
msgid "No options available"
msgstr ""
#: digikam/digikamapp.cpp:921 libs/widgets/common/statuszoombar.cpp:113
#: utilities/imageeditor/editor/editorwindow.cpp:552
msgid "Zoom Out"
msgstr ""
#: digikam/digikamapp.cpp:913 libs/widgets/common/statuszoombar.cpp:130
#: utilities/imageeditor/editor/editorwindow.cpp:547
msgid "Zoom In"
msgstr ""
#: libs/widgets/common/statusnavigatebar.cpp:77
msgid "Go to the first item"
msgstr ""
#: libs/widgets/common/statusnavigatebar.cpp:83
msgid "Go to the previous item"
msgstr ""
#: libs/widgets/common/statusnavigatebar.cpp:89
msgid "Go to the next item"
msgstr ""
#: libs/widgets/common/statusnavigatebar.cpp:95
msgid "Go to the last item"
msgstr ""
#: libs/widgets/common/curveswidget.cpp:535
msgid ""
"x:%1\n"
"y:%2"
msgstr ""
#: libs/widgets/imageplugins/imageguidewidget.cpp:245
#: libs/widgets/imageplugins/imageguidewidget.cpp:330
#: libs/widgets/imageplugins/imageguidewidget.cpp:395
#: libs/widgets/imageplugins/imageregionwidget.cpp:233
#: libs/widgets/imageplugins/imageregionwidget.cpp:268
msgid "Original"
msgstr ""
#: libs/widgets/imageplugins/imageguidewidget.cpp:263
#: libs/widgets/imageplugins/imageguidewidget.cpp:321
#: libs/widgets/imageplugins/imageguidewidget.cpp:386
#: libs/widgets/imageplugins/imageregionwidget.cpp:224
#: libs/widgets/imageplugins/imageregionwidget.cpp:259
msgid "Target"
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:96
msgid ""
" Here you can see the original clip image which will be used for the preview "
"computation."
" Click and drag the mouse cursor in the image to change the clip focus."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:119
msgid ""
" If you enable this option, you will separate the preview area horizontally, "
"displaying the original and target image at the same time. The target is "
"duplicated from the original below the red dashed line."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:130
msgid ""
" If you enable this option, you will separate the preview area vertically, "
"displaying the original and target image at the same time. The target is "
"duplicated from the original to the right of the red dashed line."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:145
msgid ""
" If you enable this option, you will separate the preview area horizontally, "
"displaying the original and target image at the same time. The original is "
"above the red dashed line, the target below it."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:156
msgid ""
" If you enable this option, you will separate the preview area vertically, "
"displaying the original and target image at the same time. The original is to "
"the left of the red dashed line, the target to the right of it."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:168
msgid " If you enable this option, the preview area will not be separated."
msgstr ""
#: libs/widgets/imageplugins/imagepanelwidget.cpp:330
msgid " If you enable this option, you will see the original image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:114
msgid ""
" If you enable this option, the preview area will split vertically. A "
"contiguous area of the image will be shown, with one half from the original "
"image, the other half from the target image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:126
msgid ""
" If you enable this option, the preview area will split horizontally. A "
"contiguous area of the image will be shown, with one half from the original "
"image, the other half from the target image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:138
msgid ""
" If you enable this option, the preview area will split vertically. The same "
"part of the original and the target image will be shown side by side."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:149
msgid ""
" If you enable this option, the preview area will split horizontally. The "
"same part of the original and the target image will be shown side by side."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:160
msgid " If you enable this option, you will see the target image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:169
msgid ""
" If you enable this option, you will see the original image when the mouse is "
"over image area, else the target image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:183
msgid ""
" Set this option to display black overlaid on the preview. This will help you "
"to avoid under-exposing the image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:191
msgid ""
" Set this option on display white overlaid on the preview. This will help you "
"to avoid over-exposing the image."
msgstr ""
#: libs/widgets/imageplugins/imagewidget.cpp:317
msgid "(%1,%2) RGBA:%3,%4,%5,%6"
msgstr ""
#: digikam/firstrun.cpp:91
msgid "Albums Library Folder"
msgstr ""
#: digikam/firstrun.cpp:93
msgid ""
" digiKam will store the photo albums which you create in a common "
"Albums Library Folder. Below, please select which folder you would like "
"digiKam to use as the common Albums Library Folder. Do not use a mount path hosted by a remote computer. There is an album in the database which does not appear to be on disk. This "
"album should be removed from the database, however you may lose information "
"because all images associated with this album will be removed from the database "
"as well."
" digiKam cannot continue without removing the items from the database because "
"all views depend on the information in the database. Do you want them to be "
"removed from the database?\n"
" There are %n albums in the database which do not appear to be on disk. These "
"albums should be removed from the database, however you may lose information "
"because all images associated with these albums will be removed from the "
"database as well."
" digiKam cannot continue without removing the items from the database because "
"all views depend on the information in the database. Do you want them to be "
"removed from the database?"
msgstr ""
#: digikam/scanlib.cpp:173
msgid "Albums are Missing"
msgstr ""
#: digikam/scanlib.cpp:200
msgid "Scanning items, please wait..."
msgstr ""
#: digikam/scanlib.cpp:245
msgid "Updating items, please wait..."
msgstr ""
#: digikam/scanlib.cpp:504
#, c-format
msgid ""
"_n: "
" There is an item in the database which does not appear to be on disk or is "
"located in the root album of the path. This file should be removed from the "
"database, however you may lose information."
" digiKam cannot continue without removing the item from the database because "
"all views depend on the information in the database. Do you want it to be "
"removed from the database?\n"
" There are %n items in the database which do not appear to be on disk or are "
"located in the root album of the path. These files should be removed from the "
"database, however you may lose information."
" digiKam cannot continue without removing these items from the database "
"because all views depend on the information in the database. Do you want them "
"to be removed from the database?"
msgstr ""
#: digikam/scanlib.cpp:514
msgid "Files are Missing"
msgstr ""
#: digikam/digikamfirstrun.cpp:77
msgid "Album Library Path"
msgstr ""
#: digikam/digikamfirstrun.cpp:89
msgid ""
"_: This is a path name so you should include the slash in the translation\n"
"/Pictures"
msgstr ""
#: digikam/digikamfirstrun.cpp:108
msgid ""
"You must select a folder for digiKam to use as the Album Library folder."
msgstr ""
#: digikam/digikamfirstrun.cpp:120
msgid "digiKam cannot use your home folder as the Album Library folder."
msgstr ""
#: digikam/digikamfirstrun.cpp:130
msgid ""
" %1 %1 digiKam is a photo management program for the Trinity Desktop Environment. It is "
"designed to import, organize, and export your digital photographs on your "
"computer. You are currently in the Album view mode of digiKam. The Albums are the real "
"containers where your files are stored, they are identical with the folders on "
"disk. Some of the new features in this release of digiKam include (compared to "
"digiKam %4): We hope that you will enjoy digiKam. Thank you, The digiKam Team Here you can review the images found using the current search settings."
msgstr ""
#: digikam/searchadvanceddialog.cpp:122
msgid "Search Rules"
msgstr ""
#: digikam/searchadvanceddialog.cpp:123
msgid ""
" Here you can review the search rules used to filter image-searching in album "
"library."
msgstr ""
#: digikam/searchadvanceddialog.cpp:133
msgid "Add/Delete Option"
msgstr ""
#: digikam/searchadvanceddialog.cpp:134
msgid " You can edit the search rules by adding/removing criteria."
msgstr ""
#: digikam/searchadvanceddialog.cpp:141 digikam/searchwidgets.cpp:138
#: digikam/searchwidgets.cpp:261 digikam/searchwidgets.cpp:483
#: digikam/searchwidgets.cpp:593
msgid "As well as"
msgstr ""
#: digikam/searchadvanceddialog.cpp:142 digikam/searchwidgets.cpp:138
#: digikam/searchwidgets.cpp:256 digikam/searchwidgets.cpp:483
#: digikam/searchwidgets.cpp:593
msgid "Or"
msgstr ""
#: digikam/searchadvanceddialog.cpp:145
msgid "&Add"
msgstr ""
#: digikam/searchadvanceddialog.cpp:146
msgid "&Del"
msgstr ""
#: digikam/searchadvanceddialog.cpp:159
msgid "Group/Ungroup Options"
msgstr ""
#: digikam/searchadvanceddialog.cpp:160
msgid ""
" You can group or ungroup any search criteria from the Search Rule set."
msgstr ""
#: digikam/searchadvanceddialog.cpp:165
msgid "&Group"
msgstr ""
#: digikam/searchadvanceddialog.cpp:166
msgid "&Ungroup"
msgstr ""
#: digikam/searchadvanceddialog.cpp:180
msgid "&Save search as: "
msgstr ""
#: digikam/searchadvanceddialog.cpp:182
msgid ""
" Enter the name used to save the current search in \"My Searches\" view"
msgstr ""
#: digikam/ratingfilter.cpp:80
msgid ""
"Select the rating value used to filter albums contents. Use contextual pop-up "
"menu to set rating filter condition."
msgstr ""
#: digikam/ratingfilter.cpp:151
msgid "Rating Filter"
msgstr ""
#: digikam/ratingfilter.cpp:153
msgid "Greater Equal Condition"
msgstr ""
#: digikam/ratingfilter.cpp:154
msgid "Equal Condition"
msgstr ""
#: digikam/ratingfilter.cpp:155
msgid "Less Equal Condition"
msgstr ""
#: digikam/ratingfilter.cpp:187
#, c-format
msgid "Rating >= %1"
msgstr ""
#: digikam/ratingfilter.cpp:192
#, c-format
msgid "Rating = %1"
msgstr ""
#: digikam/ratingfilter.cpp:197
#, c-format
msgid "Rating <= %1"
msgstr ""
#: digikam/digikamapp.cpp:127
msgid "Initializing..."
msgstr ""
#: digikam/digikamapp.cpp:162 showfoto/showfoto.cpp:179
msgid "Checking ICC repository"
msgstr ""
#: digikam/digikamapp.cpp:170 showfoto/showfoto.cpp:187
msgid "Checking dcraw version"
msgstr ""
#: digikam/digikamapp.cpp:176
msgid "Scan Albums"
msgstr ""
#: digikam/digikamapp.cpp:182
msgid "Reading database"
msgstr ""
#: digikam/digikamapp.cpp:265
msgid ""
" ICC profiles path seems to be invalid. If you want to set it now, select \"Yes\", otherwise select \"No\". In this "
"case, \"Color Management\" feature will be disabled until you solve this "
"issue To create new tags, you can use the following rules: "
" Select the histogram time unit here."
" You can change the graph decade to zoom in or zoom out over time."
msgstr ""
#: digikam/timelineview.cpp:149
msgid ""
" Select the histogram scale here."
" If the date count's maximal values are small, you can use the linear scale."
" Logarithmic scale can be used when the maximal values are big; if it is "
"used, all values (small and large) will be visible on the graph."
msgstr ""
#: digikam/timelineview.cpp:198
msgid "Clear current selection"
msgstr ""
#: digikam/timelineview.cpp:199
msgid ""
" If you press this button, current dates selection from time-line will be "
"clear."
msgstr ""
#: digikam/timelineview.cpp:203
msgid ""
" Enter the name of the current dates search to save in the \"My Date "
"Searches\" view"
msgstr ""
#: digikam/timelineview.cpp:209
msgid "Save current selection to a new virtual Album"
msgstr ""
#: digikam/timelineview.cpp:210
msgid ""
" If you press this button, current dates selection from time-line will be "
"saved to a new search virtual Album using name set on the left side."
msgstr ""
#: digikam/searchquickdialog.cpp:75
msgid "Quick Search"
msgstr ""
#: digikam/searchquickdialog.cpp:84
msgid "Search:"
msgstr ""
#: digikam/searchquickdialog.cpp:85
msgid "Enter here your search criteria"
msgstr ""
#: digikam/searchquickdialog.cpp:86
msgid " Enter your search criteria to find items in the album library"
msgstr ""
#: digikam/searchquickdialog.cpp:90
msgid ""
" Here you can see the items found in album library, using the current search "
"criteria"
msgstr ""
#: digikam/searchquickdialog.cpp:93
msgid "Save search as:"
msgstr ""
#: digikam/searchquickdialog.cpp:96
msgid ""
" Enter the name of the current search to save in the \"My Searches\" view"
msgstr ""
#: digikam/digikamview.cpp:215 utilities/setup/setup.cpp:142
msgid "Albums"
msgstr ""
#: digikam/digikamview.cpp:216
msgid "Calendar"
msgstr ""
#: digikam/digikamview.cpp:218
msgid "Timeline"
msgstr ""
#: digikam/digikamview.cpp:219
msgid "Searches"
msgstr ""
#: digikam/digikamview.cpp:1509
msgid "Preparing slideshow of %1 images. Please wait..."
msgstr ""
#: digikam/tagspopupmenu.cpp:183 digikam/tagspopupmenu.cpp:270
msgid "Add New Tag..."
msgstr ""
#: showfoto/setup/setupeditor.cpp:104 utilities/setup/setupeditor.cpp:84
#: utilities/setup/setupgeneral.cpp:168 utilities/setup/setuplighttable.cpp:74
msgid "Interface Options"
msgstr ""
#: showfoto/setup/setupeditor.cpp:106 utilities/setup/setupeditor.cpp:86
msgid "&Use theme background color"
msgstr ""
#: showfoto/setup/setupeditor.cpp:109 utilities/setup/setupeditor.cpp:88
msgid ""
" Enable this option to use background theme color in image editor area"
msgstr ""
#: showfoto/setup/setupeditor.cpp:113 utilities/setup/setupeditor.cpp:93
msgid "&Background color:"
msgstr ""
#: showfoto/setup/setupeditor.cpp:116
msgid " Select background color to use for image editor area."
msgstr ""
#: showfoto/setup/setupeditor.cpp:119 utilities/setup/setupeditor.cpp:100
#: utilities/setup/setuplighttable.cpp:92
msgid "H&ide toolbar in fullscreen mode"
msgstr ""
#: showfoto/setup/setupeditor.cpp:120
msgid "Hide &thumbbar in fullscreen mode"
msgstr ""
#: showfoto/setup/setupeditor.cpp:121
msgid "Use &horizontal thumbbar (need to restart showFoto)"
msgstr ""
#: showfoto/setup/setupeditor.cpp:122
msgid ""
" If this option is enabled, the thumbnails bar will be displayed horizontally "
"behind the image area. You need to restart showFoto for this option take "
"effect."
" "
msgstr ""
#: showfoto/setup/setupeditor.cpp:124
msgid "&Deleting items should move them to trash"
msgstr ""
#: showfoto/setup/setupeditor.cpp:125 utilities/setup/setupmisc.cpp:82
msgid "&Show splash screen at startup"
msgstr ""
#: showfoto/setup/setupeditor.cpp:127 utilities/setup/setupeditor.cpp:102
msgid "Use Raw Import Tool to handle Raw image"
msgstr ""
#: showfoto/setup/setupeditor.cpp:128 utilities/setup/setupeditor.cpp:103
msgid ""
" Set on this option to use Raw Import tool before to load a Raw image, to "
"customize indeep decoding settings."
msgstr ""
#: showfoto/setup/setupeditor.cpp:134 utilities/setup/setupeditor.cpp:109
msgid "Exposure Indicators"
msgstr ""
#: showfoto/setup/setupeditor.cpp:137 utilities/setup/setupeditor.cpp:112
msgid "&Under-exposure color:"
msgstr ""
#: showfoto/setup/setupeditor.cpp:140
msgid ""
" Customize color used in image editor to identify under-exposed pixels."
msgstr ""
#: showfoto/setup/setupeditor.cpp:144 utilities/setup/setupeditor.cpp:119
msgid "&Over-exposure color:"
msgstr ""
#: showfoto/setup/setupeditor.cpp:147
msgid ""
" Customize color used in image editor to identify over-exposed pixels."
msgstr ""
#: showfoto/setup/setupeditor.cpp:152 utilities/setup/setupmetadata.cpp:96
msgid "EXIF Actions"
msgstr ""
#: showfoto/setup/setupeditor.cpp:155 utilities/setup/setupmetadata.cpp:99
msgid "Show images/thumbs &rotated according to orientation tag"
msgstr ""
#: showfoto/setup/setupeditor.cpp:158 utilities/setup/setupmetadata.cpp:102
msgid "Set orientation tag to normal after rotate/flip"
msgstr ""
#: showfoto/setup/setupeditor.cpp:162
msgid "Sort order for images"
msgstr ""
#: showfoto/setup/setupeditor.cpp:165
msgid "Sort images by:"
msgstr ""
#: showfoto/setup/setupeditor.cpp:167
msgid "File Date"
msgstr ""
#: showfoto/setup/setupeditor.cpp:168
msgid "File Name"
msgstr ""
#: showfoto/setup/setupeditor.cpp:169
msgid "File size"
msgstr ""
#: showfoto/setup/setupeditor.cpp:170
msgid ""
" Here, select whether newly-loaded images are sorted by file-date, file-name, "
"or file-size."
msgstr ""
#: showfoto/setup/setupeditor.cpp:173
msgid "Reverse ordering"
msgstr ""
#: showfoto/setup/setupeditor.cpp:174
msgid ""
" If this option is enabled, newly-loaded images will be sorted in descending "
"order."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:204 showfoto/setup/setup.cpp:94
msgid "General Settings"
msgstr ""
#: showfoto/setup/setup.cpp:98 utilities/setup/setup.cpp:158
msgid "Tool Tip"
msgstr ""
#: showfoto/setup/setup.cpp:98
msgid "Thumbbar Items Tool Tip Settings"
msgstr ""
#: showfoto/setup/setup.cpp:102 utilities/setup/setup.cpp:178
msgid "RAW decoding"
msgstr ""
#: showfoto/setup/setup.cpp:102 utilities/setup/setup.cpp:178
msgid "RAW Files Decoding Settings"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:103 showfoto/setup/setup.cpp:106
#: utilities/setup/setup.cpp:182
msgid "Color Management"
msgstr ""
#: showfoto/setup/setup.cpp:106
msgid "Color Management Settings"
msgstr ""
#: showfoto/setup/setup.cpp:110 utilities/setup/setup.cpp:174
msgid "Save Images"
msgstr ""
#: showfoto/setup/setup.cpp:110
msgid "Save Images' Files' Settings"
msgstr ""
#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190
msgid "Slide Show"
msgstr ""
#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190
msgid "Slide Show Settings"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:98
msgid "Show Thumbbar items toolti&ps"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:99
msgid ""
" Set this option to display image information when the mouse hovers over a "
"thumbbar item."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:106 utilities/setup/setuptooltip.cpp:117
msgid "File/Image Information"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:108 utilities/setup/setuptooltip.cpp:119
msgid "Show file name"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:109 utilities/setup/setuptooltip.cpp:120
msgid " Set this option to display the image file name."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:111 utilities/setup/setuptooltip.cpp:122
msgid "Show file date"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:112 utilities/setup/setuptooltip.cpp:123
msgid " Set this option to display the image file date."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:114 utilities/setup/setuptooltip.cpp:125
msgid "Show file size"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:115 utilities/setup/setuptooltip.cpp:126
msgid " Set this option to display the image file size."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:117 utilities/setup/setuptooltip.cpp:128
msgid "Show image type"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:118 utilities/setup/setuptooltip.cpp:129
msgid " Set this option to display the image type."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:120 utilities/setup/setuptooltip.cpp:131
msgid "Show image dimensions"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:121 utilities/setup/setuptooltip.cpp:132
msgid " Set this option to display the image dimensions in pixels."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:129 utilities/setup/setuptooltip.cpp:140
msgid "Show camera make and model"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:130 utilities/setup/setuptooltip.cpp:141
msgid ""
" Set this option to display the make and model of the camera with which the "
"image has been taken."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:133 utilities/setup/setuptooltip.cpp:144
msgid "Show camera date"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:134 utilities/setup/setuptooltip.cpp:145
msgid " Set this option to display the date when the image was taken."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:136
msgid "Show camera aperture and focal length"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:137 utilities/setup/setuptooltip.cpp:148
msgid ""
" Set this option to display the camera aperture and focal settings used to "
"take the image."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:140 utilities/setup/setuptooltip.cpp:151
msgid "Show camera exposure and sensitivity"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:141 utilities/setup/setuptooltip.cpp:152
msgid ""
" Set this option to display the camera exposure and sensitivity used to take "
"the image."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:144 utilities/setup/setuptooltip.cpp:155
msgid "Show camera mode and program"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:145 utilities/setup/setuptooltip.cpp:156
msgid ""
" Set this option to display the camera mode and program used to take the "
"image."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:148 utilities/setup/setuptooltip.cpp:159
msgid "Show camera flash settings"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:149 utilities/setup/setuptooltip.cpp:160
msgid ""
" Set this option to display the camera flash settings used to take the image."
msgstr ""
#: showfoto/setup/setuptooltip.cpp:152 utilities/setup/setuptooltip.cpp:163
msgid "Show camera white balance settings"
msgstr ""
#: showfoto/setup/setuptooltip.cpp:153 utilities/setup/setuptooltip.cpp:164
msgid ""
" Set this option to display the camera white balance settings used to take "
"the image."
msgstr ""
#: showfoto/main.cpp:47
msgid "File(s) or folder(s) to open"
msgstr ""
#: showfoto/main.cpp:58
msgid "showFoto"
msgstr ""
#: showfoto/showfoto.cpp:214
msgid "Brightness/Contrast/Gamma"
msgstr ""
#: showfoto/showfoto.cpp:217
msgid "Increase Gamma"
msgstr ""
#: showfoto/showfoto.cpp:220
msgid "Decrease Gamma"
msgstr ""
#: showfoto/showfoto.cpp:223
msgid "Increase Brightness"
msgstr ""
#: showfoto/showfoto.cpp:226
msgid "Decrease Brightness"
msgstr ""
#: showfoto/showfoto.cpp:229
msgid "Increase Contrast"
msgstr ""
#: showfoto/showfoto.cpp:232
msgid "Decrease Contrast"
msgstr ""
#: showfoto/showfoto.cpp:362
msgid ""
" The ICC profile path seems to be invalid. If you want to set it now, select \"Yes\", otherwise select \"No\". In this "
"case, \"Color Management\" feature will be disabled until you solve this "
"issue If this box is checked, files will be permanently removed "
"instead of being placed in the Trash Bin. Use this option with caution: most filesystems are unable to "
"undelete deleted files reliably. If this box is checked, this dialog will no longer be shown, and files will "
"be directly moved to the Trash Bin Radius: this control selects the gliding window size used for the "
"filter. Larger values do not increase the amount of time needed to filter each "
"pixel in the image but can cause blurring. This window moves across the image, "
"and the color in it is smoothed to remove imperfections. In any case it must be "
"about the same size as the noise granularity or somewhat more. If it is set "
"higher than necessary, then it can cause unwanted blur."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:153
#: imageplugins/noisereduction/noisereductiontool.cpp:111
msgid "Threshold:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:117
msgid ""
" Threshold: use the slider for coarse adjustment, and the spin control "
"for fine adjustment to control edge detection sensitivity. This value should be "
"set so that edges and details are clearly visible and noise is smoothed out. "
"Adjustment must be made carefully, because the gap between \"noisy\", "
"\"smooth\", and \"blur\" is very small. Adjust it as carefully as you would "
"adjust the focus of a camera."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:127
msgid "Texture:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:133
msgid ""
" Texture: this control sets the texture accuracy. This value can be "
"used, to get more or less texture accuracy. When decreased, then noise and "
"texture are blurred out, when increased then texture is amplified, but also "
"noise will increase. It has almost no effect on image edges."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:117
#: imageplugins/noisereduction/noisereductiontool.cpp:140
msgid "Sharpness:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:146
msgid ""
" Sharpness: This value improves the frequency response for the filter. "
"When it is too strong then not all noise can be removed, or spike noise may "
"appear. Set it near to maximum, if you want to remove very weak noise or "
"JPEG-artifacts, without losing detail."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:154
msgid "Edge Lookahead:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:160
msgid ""
" Edge: This value defines the pixel distance to which the filter looks "
"ahead for edges. When this value is increased, then spike noise is erased. You "
"can eventually re-adjust the Edge filter, when you have changed this "
"setting. When this value is too high, the adaptive filter can no longer "
"accurately track image details, and noise or blurring can occur."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:169
msgid "Erosion:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:175
msgid ""
" Erosion: Use this to increase edge noise erosion and spike noise "
"erosion (noise is removed by erosion)."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:196
msgid "Details"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:203
msgid "Luminance:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:209
msgid ""
" Luminance: this control sets the luminance tolerance of the image.We "
"recommend using either the Color or the Luminance "
"tolerance settings to make an image correction, not both at the same time. "
"These settings do not influence the main smoothing process controlled by the "
"Details settings."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:153
#: imageplugins/noisereduction/noisereductiontool.cpp:217
msgid "Color:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:223
msgid ""
" Color: this control sets the color tolerance of the image. It is "
"recommended using either the Color or the Luminance "
"tolerance to make image correction, not both at the same time. These settings "
"do not influence the main smoothing process controlled by the Details "
"settings."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:149
#: imageplugins/coreplugin/bcgtool.cpp:172
#: imageplugins/noisereduction/noisereductiontool.cpp:231
#: imageplugins/whitebalance/whitebalancetool.cpp:265
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:292
msgid "Gamma:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:237
msgid ""
" Gamma: this control sets the gamma tolerance of the image. This value "
"can be used to increase the tolerance values for darker areas (which commonly "
"are noisier). This results in more blur for shadow areas."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:243
msgid "Damping:"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:249
msgid ""
" Damping: this control sets the phase-jitter damping adjustment. This "
"value defines how fast the adaptive filter-radius reacts to luminance "
"variations. If increased, then edges appear smoother; if too high, then blur "
"may occur. If at minimum, then noise and phase jitter at the edges can occur. "
"It can suppress spike noise when increased, and this is the preferred method to "
"remove it."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:269
msgid "Advanced"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:467
msgid "Photograph Noise Reduction Settings File to Load"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:479
msgid "\"%1\" is not a Photograph Noise Reduction settings text file."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:499
msgid "Cannot load settings from the Photograph Noise Reduction text file."
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:508
msgid "Photograph Noise Reduction Settings File to Save"
msgstr ""
#: imageplugins/noisereduction/noisereductiontool.cpp:531
msgid "Cannot save settings to the Photograph Noise Reduction text file."
msgstr ""
#: imageplugins/channelmixer/imageplugin_channelmixer.cpp:48
msgid "Channel Mixer..."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:100
#: imageplugins/channelmixer/channelmixertool.cpp:474
msgid "Channel Mixer"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:106
msgid ""
" You can see here the image's color channels' gains adjustments preview. You "
"can pick color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:127
msgid ""
" Select the color channel to mix here:"
" Red: display the red image-channel values."
" Green: display the green image-channel values."
" Blue: display the blue image-channel values."
" "
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:139
#: imageplugins/channelmixer/channelmixertool.cpp:136
#: imageplugins/colorfx/colorfxtool.cpp:120
#: imageplugins/coreplugin/autocorrectiontool.cpp:120
#: imageplugins/coreplugin/bcgtool.cpp:119
#: imageplugins/coreplugin/bwsepiatool.cpp:210
#: imageplugins/coreplugin/hsl/hsltool.cpp:123
#: imageplugins/coreplugin/rgbtool.cpp:117
#: imageplugins/whitebalance/whitebalancetool.cpp:138
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:192
msgid ""
" Select the histogram scale here."
" If the image's maximal counts are small, you can use the linear scale."
" Logarithmic scale can be used when the maximal counts are big; if it is "
"used, all values (small and large) will be visible on the graph."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:167
msgid ""
" Here you can see the target preview image histogram drawing of the selected "
"image channel. This one is re-computed at any mixer settings changes."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:177
msgid "Red:"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:182
msgid " Select the red color gain in percent for the current channel here."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:184
msgid "Blue:"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:189
msgid " Select the green color gain in percent for the current channel here."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:191
#: imageplugins/whitebalance/whitebalancetool.cpp:272
msgid "Green:"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:196
msgid " Select the blue color gain in percent for the current channel here."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:270
#: imageplugins/adjustlevels/adjustlevelstool.cpp:292
#: imageplugins/channelmixer/channelmixertool.cpp:198
msgid "&Reset"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:199
msgid ""
"Reset color channels' gains settings from the currently selected channel."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:203
msgid "Monochrome"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:204
msgid ""
" Enable this option if you want the image rendered in monochrome mode. In "
"this mode, the histogram will display only luminosity values."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:207
msgid "Preserve luminosity"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:208
msgid " Enable this option is you want preserve the image luminosity."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:623
msgid "Select Gimp Gains Mixer File to Load"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:695
msgid "Cannot load settings from the Gains Mixer text file."
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:707
msgid "Gimp Gains Mixer File to Save"
msgstr ""
#: imageplugins/channelmixer/channelmixertool.cpp:769
msgid "Cannot save settings to the Gains Mixer text file."
msgstr ""
#: imageplugins/colorfx/imageplugin_colorfx.cpp:50
msgid "Color Effects..."
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:83
msgid "Color Effects"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:91
msgid " This is the color effects preview"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:110
#: imageplugins/coreplugin/autocorrectiontool.cpp:110
#: imageplugins/coreplugin/bcgtool.cpp:109
#: imageplugins/coreplugin/bwsepiatool.cpp:200
#: imageplugins/coreplugin/hsl/hsltool.cpp:113
#: imageplugins/coreplugin/rgbtool.cpp:107
#: imageplugins/whitebalance/whitebalancetool.cpp:128
msgid ""
" Select the histogram channel to display here:"
" Luminosity: display the image's luminosity values."
" Red: display the red image-channel values."
" Green: display the green image-channel values."
" Blue: display the blue image-channel values."
" "
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:151
#: imageplugins/coreplugin/autocorrectiontool.cpp:151
#: imageplugins/coreplugin/bcgtool.cpp:150
#: imageplugins/coreplugin/bwsepiatool.cpp:243
#: imageplugins/coreplugin/hsl/hsltool.cpp:156
#: imageplugins/coreplugin/rgbtool.cpp:150
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:229
msgid ""
" Here you can see the target preview image histogram drawing of the selected "
"image channel. This one is re-computed at any settings changes."
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:164
msgid "Solarize"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:165
#: imageplugins/colorfx/colorfxtool.cpp:408
msgid "Vivid"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:166
#: imageplugins/colorfx/colorfxtool.cpp:412
msgid "Neon"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:167
#: imageplugins/colorfx/colorfxtool.cpp:416
msgid "Find Edges"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:169
msgid ""
" Select the effect type to apply to the image here."
" Solarize: simulates solarization of photograph."
" Vivid: simulates the Velvia(tm) slide film colors."
" Neon: coloring the edges in a photograph to reproduce a fluorescent "
"light effect."
" Find Edges: detects the edges in a photograph and their strength."
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:124
#: imageplugins/colorfx/colorfxtool.cpp:178
#: imageplugins/distortionfx/distortionfxtool.cpp:140
msgid "Level:"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:182
#: imageplugins/distortionfx/distortionfxtool.cpp:144
msgid " Set here the level of the effect."
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:184
#: imageplugins/distortionfx/distortionfxtool.cpp:147
msgid "Iteration:"
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:188
msgid ""
" This value controls the number of iterations to use with the Neon and Find "
"Edges effects."
msgstr ""
#: imageplugins/colorfx/colorfxtool.cpp:404
msgid "ColorFX"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:76
msgid "Hot Pixels"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:88
msgid "Filter:"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:90
msgid "Average"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:92
msgid "Quadratic"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:93
msgid "Cubic"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:96
msgid "Black Frame..."
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:97
msgid ""
" Use this button to add a new black frame file which will be used by the hot "
"pixels removal filter."
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:146
#: utilities/imageeditor/editor/editorwindow.cpp:1339
msgid "Loading: "
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:186
msgid "Select Black Frame Image"
msgstr ""
#: imageplugins/hotpixels/hotpixelstool.cpp:255
msgid "Hot Pixels Correction"
msgstr ""
#: imageplugins/hotpixels/blackframelistview.cpp:43
msgid "Preview"
msgstr ""
#: imageplugins/hotpixels/blackframelistview.cpp:44
#: imageplugins/inserttext/fontchooserwidget.cpp:160
msgid "Size"
msgstr ""
#: imageplugins/hotpixels/blackframelistview.cpp:46
msgid ""
"_: This is a column which will contain the amount of HotPixels found in the "
"black frame file\n"
"HP"
msgstr ""
#: imageplugins/hotpixels/imageplugin_hotpixels.cpp:50
msgid "Hot Pixels..."
msgstr ""
#: imageplugins/filmgrain/filmgraintool.cpp:65
#: imageplugins/filmgrain/filmgraintool.cpp:192
msgid "Film Grain"
msgstr ""
#: imageplugins/filmgrain/filmgraintool.cpp:77
#: imageplugins/infrared/infraredtool.cpp:79
msgid "Sensitivity (ISO):"
msgstr ""
#: imageplugins/filmgrain/filmgraintool.cpp:87
msgid ""
" Set here the film ISO-sensitivity to use for simulating the film graininess."
msgstr ""
#: imageplugins/filmgrain/imageplugin_filmgrain.cpp:49
msgid "Add Film Grain..."
msgstr ""
#: imageplugins/antivignetting/imageplugin_antivignetting.cpp:48
msgid "Vignetting Correction..."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:73
#: imageplugins/antivignetting/antivignettingtool.cpp:367
msgid "Vignetting Correction"
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:90
msgid ""
" You can see here a thumbnail preview of the anti-vignetting mask applied to "
"the image."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:95
msgid "Density:"
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:101
msgid ""
" This value controls the degree of intensity attenuation by the filter at its "
"point of maximum density."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:106
msgid "Power:"
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:112
msgid ""
" This value is used as the exponent controlling the fall-off in density from "
"the center of the filter to the periphery."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:123
msgid ""
" This value is the radius of the center filter. It is a multiple of the "
"half-diagonal measure of the image, at which the density of the filter falls to "
"zero."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:131
#: imageplugins/coreplugin/bcgtool.cpp:160
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:280
msgid "Brightness:"
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:136
msgid " Set here the brightness re-adjustment of the target image."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:140
#: imageplugins/coreplugin/bcgtool.cpp:166
#: imageplugins/coreplugin/bwsepiatool.cpp:469
#: imageplugins/coreplugin/iccprooftool.cpp:434
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:286
msgid "Contrast:"
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:145
msgid " Set here the contrast re-adjustment of the target image."
msgstr ""
#: imageplugins/antivignetting/antivignettingtool.cpp:155
msgid " Set here the gamma re-adjustment of the target image."
msgstr ""
#: imageplugins/whitebalance/imageplugin_whitebalance.cpp:48
msgid "White Balance..."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:97
#: imageplugins/whitebalance/whitebalancetool.cpp:690
msgid "White Balance"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:105
msgid ""
" You can see here the image's white-balance adjustments preview. You can pick "
"color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:170
msgid ""
" Here you can see the target preview image histogram drawing of the selected "
"image channel. This one is re-computed at any filter settings changes."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:187
msgid ""
" Set here the white balance color temperature in Kelvin."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:196
msgid "Preset:"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:198
msgid "Candle"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:199
msgid "40W Lamp"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:200
msgid "100W Lamp"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:201
msgid "200W Lamp"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:202
msgid "Sunrise"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:203
msgid "Studio Lamp"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:204
msgid "Moonlight"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:205
msgid "Neutral"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:206
msgid "Daylight D50"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:207
msgid "Photo Flash"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:208
msgid "Sun"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:209
msgid "Xenon Lamp"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:210
msgid "Daylight D65"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:213
msgid ""
" Select the white balance color temperature preset to use here:"
" Candle: candle light (1850K)."
" 40W Lamp: 40 Watt incandescent lamp (2680K)."
" 100W Lamp: 100 Watt incandescent lamp (2800K)."
" 200W Lamp: 200 Watt incandescent lamp (3000K)."
" Sunrise: sunrise or sunset light (3200K)."
" Studio Lamp: tungsten lamp used in photo studio or light at 1 hour "
"from dusk/dawn (3400K)."
" Moonlight: moon light (4100K)."
" Neutral: neutral color temperature (4750K)."
" Daylight D50: sunny daylight around noon (5000K)."
" Photo Flash: electronic photo flash (5500K)."
" Sun: effective sun temperature (5770K)."
" Xenon Lamp: xenon lamp or light arc (6420K)."
" Daylight D65: overcast sky light (6500K)."
" None: no preset value."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:235
msgid "Temperature tone color picker."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:236
msgid ""
" With this button, you can pick the color from original image used to set "
"white color balance temperature and green component."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:244
msgid "Black point:"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:249
msgid " Set here the black level value."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:251
msgid "Shadows:"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:256
msgid " Set here the shadows noise suppresion level."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:188
#: imageplugins/whitebalance/whitebalancetool.cpp:258
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:299
msgid "Saturation:"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:263
msgid " Set here the saturation value."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:270
msgid " Set here the gamma correction value."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:277
msgid ""
" Set here the green component to set magenta color cast removal level."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:284
msgid ""
" With this button, you can automatically adjust Exposure and Black Point "
"values."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:296
msgid " Set here the main exposure compensation value in E.V."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:298
msgid "Fine:"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:303
msgid ""
" This value in E.V will be added to main exposure compensation value to set "
"fine exposure adjustment."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:783
msgid "White Color Balance Settings File to Load"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:796
msgid "\"%1\" is not a White Color Balance settings text file."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:816
msgid "Cannot load settings from the White Color Balance text file."
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:825
msgid "White Color Balance Settings File to Save"
msgstr ""
#: imageplugins/whitebalance/whitebalancetool.cpp:845
msgid "Cannot save settings to the White Color Balance text file."
msgstr ""
#: imageplugins/charcoal/charcoaltool.cpp:66
#: imageplugins/charcoal/charcoaltool.cpp:199
msgid "Charcoal"
msgstr ""
#: imageplugins/charcoal/charcoaltool.cpp:77
msgid "Pencil size:"
msgstr ""
#: imageplugins/charcoal/charcoaltool.cpp:82
msgid " Set here the charcoal pencil size used to simulate the drawing."
msgstr ""
#: imageplugins/charcoal/charcoaltool.cpp:86
#: imageplugins/coreplugin/redeyetool.cpp:170
#: imageplugins/oilpaint/oilpainttool.cpp:89
msgid "Smooth:"
msgstr ""
#: imageplugins/charcoal/charcoaltool.cpp:91
msgid ""
" This value controls the smoothing effect of the pencil under the canvas."
msgstr ""
#: imageplugins/charcoal/imageplugin_charcoal.cpp:50
msgid "Charcoal Drawing..."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:99
#: imageplugins/adjustcurves/adjustcurvestool.cpp:457
msgid "Adjust Curves"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:105
msgid ""
" This is the image's curve-adjustments preview. You can pick a spot on the "
"image to see the corresponding level in the histogram."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:129
msgid ""
" Select the histogram channel to display here:"
" Luminosity: display the image's luminosity values."
" Red: display the red image-channel values."
" Green: display the green image-channel values."
" Blue: display the blue image-channel values."
" Alpha: display the alpha image-channel values. This channel "
"corresponds to the transparency value and is supported by some image formats, "
"such as PNG or TIF."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:177
msgid ""
" Here you can see the target preview image histogram drawing of the selected "
"image channel. This one is re-computed at any curves settings changes."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:190
msgid ""
" This is the curve drawing of the selected channel from original image"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:217
msgid "Curve free mode"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:218
msgid " With this button, you can draw your curve free-hand with the mouse."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:226
msgid "Curve smooth mode"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:227
msgid ""
" With this button, you constrains the curve type to a smooth line with "
"tension."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:242
#: imageplugins/adjustlevels/adjustlevelstool.cpp:261
msgid "All channels shadow tone color picker"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:243
msgid ""
" With this button, you can pick the color from original image used to set "
"Shadow Tone smooth curves point on Red, Green, Blue, and Luminosity "
"channels."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:252
#: imageplugins/adjustlevels/adjustlevelstool.cpp:271
msgid "All channels middle tone color picker"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:253
msgid ""
" With this button, you can pick the color from original image used to set "
"Middle Tone smooth curves point on Red, Green, Blue, and Luminosity "
"channels."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:262
#: imageplugins/adjustlevels/adjustlevelstool.cpp:281
msgid "All channels highlight tone color picker"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:263
msgid ""
" With this button, you can pick the color from original image used to set "
"Highlight Tone smooth curves point on Red, Green, Blue, and Luminosity "
"channels."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:272
msgid "Reset current channel curves' values."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:273
msgid ""
" If you press this button, all curves' values from the current selected "
"channel will be reset to the default values."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:624
msgid "Select Gimp Curves File to Load"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:630
msgid "Cannot load from the Gimp curves text file."
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:645
msgid "Gimp Curves File to Save"
msgstr ""
#: imageplugins/adjustcurves/adjustcurvestool.cpp:651
msgid "Cannot save to the Gimp curves text file."
msgstr ""
#: imageplugins/adjustcurves/imageplugin_adjustcurves.cpp:47
msgid "Curves Adjust..."
msgstr ""
#: imageplugins/texture/imageplugin_texture.cpp:48
msgid "Apply Texture..."
msgstr ""
#: imageplugins/texture/texturetool.cpp:68
#: imageplugins/texture/texturetool.cpp:216
msgid "Texture"
msgstr ""
#: imageplugins/texture/texturetool.cpp:81
msgid "Paper"
msgstr ""
#: imageplugins/texture/texturetool.cpp:82
msgid "Paper 2"
msgstr ""
#: imageplugins/texture/texturetool.cpp:83
msgid "Fabric"
msgstr ""
#: imageplugins/texture/texturetool.cpp:84
msgid "Burlap"
msgstr ""
#: imageplugins/texture/texturetool.cpp:85
msgid "Bricks"
msgstr ""
#: imageplugins/texture/texturetool.cpp:86
msgid "Bricks 2"
msgstr ""
#: imageplugins/texture/texturetool.cpp:87
msgid "Canvas"
msgstr ""
#: imageplugins/texture/texturetool.cpp:88
msgid "Marble"
msgstr ""
#: imageplugins/texture/texturetool.cpp:89
msgid "Marble 2"
msgstr ""
#: imageplugins/texture/texturetool.cpp:90
msgid "Blue Jean"
msgstr ""
#: imageplugins/texture/texturetool.cpp:91
msgid "Cell Wood"
msgstr ""
#: imageplugins/texture/texturetool.cpp:92
msgid "Metal Wire"
msgstr ""
#: imageplugins/texture/texturetool.cpp:93
msgid "Modern"
msgstr ""
#: imageplugins/texture/texturetool.cpp:94
msgid "Wall"
msgstr ""
#: imageplugins/texture/texturetool.cpp:95
msgid "Moss"
msgstr ""
#: imageplugins/texture/texturetool.cpp:96
msgid "Stone"
msgstr ""
#: imageplugins/texture/texturetool.cpp:98
msgid " Set here the texture type to apply to the image."
msgstr ""
#: imageplugins/texture/texturetool.cpp:102
msgid "Relief:"
msgstr ""
#: imageplugins/texture/texturetool.cpp:107
msgid " Set here the relief gain used to merge texture and image."
msgstr ""
#: imageplugins/inserttext/imageplugin_inserttext.cpp:47
msgid "Insert Text..."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:86
msgid "Here you can choose the font to be used."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:112
msgid "Change font family?"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:114
msgid "Enable this checkbox to change the font family settings."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:122
msgid "Font:"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:132
#: imageplugins/inserttext/fontchooserwidget.cpp:149
msgid "Style:"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:139
msgid "Change font style?"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:141
msgid "Enable this checkbox to change the font style settings."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:167
msgid "Change font size?"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:169
msgid "Enable this checkbox to change the font size settings."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:192
msgid "Here you can choose the font family to be used."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:213
msgid "Here you can choose the font style to be used."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:216
#: imageplugins/inserttext/fontchooserwidget.cpp:475
#: imageplugins/inserttext/fontchooserwidget.cpp:477
#: imageplugins/inserttext/fontchooserwidget.cpp:488
#: imageplugins/inserttext/fontchooserwidget.cpp:489
msgid "Regular"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:218
msgid "Bold"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:219
msgid "Bold Italic"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:236
msgid "Relative"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:238
msgid "Font size This previews the text inserted in the image. You can use the mouse to move "
"the text to the right location."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:102
msgid " Here, enter the text you want to insert in your image."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:107
msgid " Here you can choose the font to be used."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:118
msgid "Align text to the left"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:124
msgid "Align text to the right"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:130
msgid "Align text to center"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:136
msgid "Align text to a block"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:143
msgid "Rotation:"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:146
msgid "90 Degrees"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:147
msgid "180 Degrees"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:148
msgid "270 Degrees"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:149
msgid " Select the text rotation to use."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:155
msgid " Select the font color to use."
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:159
msgid "Add border"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:160
msgid "Add a solid border around text using current text color"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:162
msgid "Semi-transparent"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:163
msgid "Use semi-transparent text background under image"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:232
msgid "Enter your text here!"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:100
msgid "Adjust Levels"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:106
msgid ""
" Here you can see the image's level-adjustments preview. You can pick a spot "
"on the image to see the corresponding level in the histogram."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:130
msgid ""
" Here select the histogram channel to display:"
" Luminosity: display the image's luminosity values."
" Red: display the red image-channel values."
" Green: display the green image-channel values."
" Blue: display the blue image-channel values."
" Alpha: display the alpha image-channel values. This channel "
"corresponds to the transparency value and is supported by some image formats, "
"such as PNG or TIF."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:143
msgid ""
" Here select the histogram scale."
" If the image's maximal counts are small, you can use the linear scale."
" The Logarithmic scale can be used when the maximal counts are big; if it is "
"used, all values (small and large) will be visible on the graph."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:173
msgid ""
" Here you can see the target preview image histogram drawing of the selected "
"image channel. This one is re-computed at any levels settings changes."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:179
msgid ""
" This is the histogram drawing of the selected channel from original image"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:188
#: imageplugins/adjustlevels/adjustlevelstool.cpp:205
msgid " Select the minimal intensity input value of the histogram."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:189
#: imageplugins/adjustlevels/adjustlevelstool.cpp:206
msgid "Minimal intensity input."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:197
#: imageplugins/adjustlevels/adjustlevelstool.cpp:219
msgid " Select the maximal intensity input value of the histogram."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:198
#: imageplugins/adjustlevels/adjustlevelstool.cpp:218
msgid "Maximal intensity input."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:212
msgid "Gamma input value."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:213
msgid " Select the gamma input value."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:223
#: imageplugins/adjustlevels/adjustlevelstool.cpp:243
msgid " Select the minimal intensity output value of the histogram."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:224
#: imageplugins/adjustlevels/adjustlevelstool.cpp:242
msgid "Minimal intensity output."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:232
#: imageplugins/adjustlevels/adjustlevelstool.cpp:249
msgid " Select the maximal intensity output value of the histogram."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:233
#: imageplugins/adjustlevels/adjustlevelstool.cpp:248
msgid "Maximal intensity output."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:262
msgid ""
" With this button, you can pick the color from original image used to set "
"Shadow Tone levels input on Red, Green, Blue, and Luminosity channels."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:272
msgid ""
" With this button, you can pick the color from original image used to set "
"Middle Tone levels input on Red, Green, Blue, and Luminosity channels."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:282
msgid ""
" With this button, you can pick the color from original image used to set "
"Highlight Tone levels input on Red, Green, Blue, and Luminosity channels."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:288
msgid "Adjust all levels automatically."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:289
msgid ""
" If you press this button, all channel levels will be adjusted automatically."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:294
msgid "Reset current channel levels' values."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:295
msgid ""
" If you press this button, all levels' values from the current selected "
"channel will be reset to the default values."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:598
msgid "Adjust Level"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:756
msgid "Select Gimp Levels File to Load"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:762
msgid "Cannot load from the Gimp levels text file."
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:776
msgid "Gimp Levels File to Save"
msgstr ""
#: imageplugins/adjustlevels/adjustlevelstool.cpp:782
msgid "Cannot save to the Gimp levels text file."
msgstr ""
#: imageplugins/adjustlevels/imageplugin_adjustlevels.cpp:48
msgid "Levels Adjust..."
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:67
msgid "Raindrops"
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:71
msgid ""
" This is the preview of the Raindrop effect."
" Note: if you have previously selected an area in the editor, this will be "
"unaffected by the filter. You can use this method to disable the Raindrops "
"effect on a human face, for example."
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:87
msgid "Drop size:"
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:92
msgid " Set here the raindrops' size."
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:96
msgid "Number:"
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:101
msgid " This value controls the maximum number of raindrops."
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:105
msgid "Fish eyes:"
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:110
msgid " This value is the fish-eye-effect optical distortion coefficient."
msgstr ""
#: imageplugins/raindrop/raindroptool.cpp:250
msgid "RainDrop"
msgstr ""
#: imageplugins/raindrop/imageplugin_raindrop.cpp:47
msgid "Raindrops..."
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:68
msgid "Blur FX"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:83
msgid "Zoom Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:84
msgid "Radial Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:85
msgid "Far Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:86
msgid "Motion Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:87
msgid "Softener Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:88
msgid "Skake Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:89
msgid "Focus Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:90
msgid "Smart Blur"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:91
msgid "Frost Glass"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:92
msgid "Mosaic"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:94
msgid ""
" Select the blurring effect to apply to the image."
" Zoom Blur: blurs the image along radial lines starting from a "
"specified center point. This simulates the blur of a zooming camera."
" Radial Blur: blurs the image by rotating the pixels around the "
"specified center point. This simulates the blur of a rotating camera."
" Far Blur: blurs the image by using far pixels. This simulates the "
"blur of an unfocalized camera lens."
" Motion Blur: blurs the image by moving the pixels horizontally. This "
"simulates the blur of a linear moving camera."
" Softener Blur: blurs the image softly in dark tones and hardly in "
"light tones. This gives images a dreamy and glossy soft focus effect. It's "
"ideal for creating romantic portraits, glamour photographs, or giving images a "
"warm and subtle glow."
" Skake Blur: blurs the image by skaking randomly the pixels. This "
"simulates the blur of a random moving camera."
" Focus Blur: blurs the image corners to reproduce the astigmatism "
"distortion of a lens."
" Smart Blur: finds the edges of color in your image and blurs them "
"without muddying the rest of the image."
" Frost Glass: blurs the image by randomly disperse light coming "
"through a frosted glass."
" Mosaic: divides the photograph into rectangular cells and then "
"recreates it by filling those cells with average pixel value."
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:118
msgid "Distance:"
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:122
msgid " Set here the blur distance in pixels."
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:128
msgid " This value controls the level to use with the current effect."
msgstr ""
#: imageplugins/blurfx/blurfxtool.cpp:399
msgid "Blur Effects"
msgstr ""
#: imageplugins/blurfx/imageplugin_blurfx.cpp:48
msgid "Blur Effects..."
msgstr ""
#: imageplugins/border/bordertool.cpp:70
#: imageplugins/border/bordertool.cpp:570
msgid "Add Border"
msgstr ""
#: imageplugins/border/bordertool.cpp:88
msgid "Solid"
msgstr ""
#: imageplugins/border/bordertool.cpp:91
msgid "Beveled"
msgstr ""
#: imageplugins/border/bordertool.cpp:92
msgid "Decorative Pine"
msgstr ""
#: imageplugins/border/bordertool.cpp:93
msgid "Decorative Wood"
msgstr ""
#: imageplugins/border/bordertool.cpp:94
msgid "Decorative Paper"
msgstr ""
#: imageplugins/border/bordertool.cpp:95
msgid "Decorative Parquet"
msgstr ""
#: imageplugins/border/bordertool.cpp:96
msgid "Decorative Ice"
msgstr ""
#: imageplugins/border/bordertool.cpp:97
msgid "Decorative Leaf"
msgstr ""
#: imageplugins/border/bordertool.cpp:98
msgid "Decorative Marble"
msgstr ""
#: imageplugins/border/bordertool.cpp:99
msgid "Decorative Rain"
msgstr ""
#: imageplugins/border/bordertool.cpp:100
msgid "Decorative Craters"
msgstr ""
#: imageplugins/border/bordertool.cpp:101
msgid "Decorative Dried"
msgstr ""
#: imageplugins/border/bordertool.cpp:102
msgid "Decorative Pink"
msgstr ""
#: imageplugins/border/bordertool.cpp:103
msgid "Decorative Stone"
msgstr ""
#: imageplugins/border/bordertool.cpp:104
msgid "Decorative Chalk"
msgstr ""
#: imageplugins/border/bordertool.cpp:105
msgid "Decorative Granite"
msgstr ""
#: imageplugins/border/bordertool.cpp:106
msgid "Decorative Rock"
msgstr ""
#: imageplugins/border/bordertool.cpp:107
msgid "Decorative Wall"
msgstr ""
#: imageplugins/border/bordertool.cpp:109
msgid " Select the border type to add around the image."
msgstr ""
#: imageplugins/border/bordertool.cpp:116
msgid "Preserve Aspect Ratio"
msgstr ""
#: imageplugins/border/bordertool.cpp:117
msgid ""
"Enable this option if you want to preserve the aspect ratio of the image. If "
"enabled, the border width will be in percent of the image size, else the border "
"width will in pixels."
msgstr ""
#: imageplugins/border/bordertool.cpp:122
#: utilities/imageeditor/tools/imageresize.cpp:194
msgid "Width (%):"
msgstr ""
#: imageplugins/border/bordertool.cpp:126
msgid " Set here the border width in percent of the image size."
msgstr ""
#: imageplugins/border/bordertool.cpp:128
msgid "Width (pixels):"
msgstr ""
#: imageplugins/border/bordertool.cpp:131
msgid " Set here the border width in pixels to add around the image."
msgstr ""
#: imageplugins/border/bordertool.cpp:384
msgid "First:"
msgstr ""
#: imageplugins/border/bordertool.cpp:385
msgid "Second:"
msgstr ""
#: imageplugins/border/bordertool.cpp:386
msgid " Set here the foreground color of the border."
msgstr ""
#: imageplugins/border/bordertool.cpp:387
msgid " Set here the Background color of the border."
msgstr ""
#: imageplugins/border/bordertool.cpp:403
msgid " Set here the color of the main border."
msgstr ""
#: imageplugins/border/bordertool.cpp:404
msgid " Set here the color of the line."
msgstr ""
#: imageplugins/border/bordertool.cpp:410
msgid " Set here the color of the upper left area."
msgstr ""
#: imageplugins/border/bordertool.cpp:411
msgid " Set here the color of the lower right area."
msgstr ""
#: imageplugins/border/bordertool.cpp:432
msgid " Set here the color of the first line."
msgstr ""
#: imageplugins/border/bordertool.cpp:433
msgid " Set here the color of the second line."
msgstr ""
#: imageplugins/border/imageplugin_border.cpp:48
msgid "Add Border..."
msgstr ""
#: imageplugins/emboss/imageplugin_emboss.cpp:50
msgid "Emboss..."
msgstr ""
#: imageplugins/emboss/embosstool.cpp:65
#: imageplugins/emboss/embosstool.cpp:164
msgid "Emboss"
msgstr ""
#: imageplugins/emboss/embosstool.cpp:75
msgid "Depth:"
msgstr ""
#: imageplugins/emboss/embosstool.cpp:80
msgid " Set here the depth of the embossing image effect."
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:70
#: imageplugins/restoration/restorationtool.cpp:301
msgid "Restoration"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:113
#: imageplugins/restoration/restorationtool.cpp:88
msgid "Preset"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:121
#: imageplugins/restoration/restorationtool.cpp:96
#: utilities/imageeditor/tools/imageresize.cpp:219
msgid "Visit CImg library website"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:123
#: imageplugins/restoration/restorationtool.cpp:98
msgid "Filtering type:"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:102
msgid "Reduce Uniform Noise"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:103
msgid "Reduce JPEG Artefacts"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:104
msgid "Reduce Texturing"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:105
msgid ""
" Select the filter preset to use for photograph restoration:"
" None: Most common values. Puts settings to default."
" Reduce Uniform Noise: reduce small image artifacts like sensor noise."
" Reduce JPEG Artefacts: reduce large image artifacts like JPEG "
"compression mosaic."
" Reduce Texturing: reduce image artifacts like paper texture or Moire "
"patterns of a scanned image."
" "
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:308
msgid "Photograph Restoration Settings File to Load"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:319
msgid "\"%1\" is not a Photograph Restoration settings text file."
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:328
msgid "Cannot load settings from the Photograph Restoration text file."
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:341
msgid "Photograph Restoration Settings File to Save"
msgstr ""
#: imageplugins/restoration/restorationtool.cpp:350
msgid "Cannot save settings to the Photograph Restoration text file."
msgstr ""
#: imageplugins/restoration/imageplugin_restoration.cpp:49
msgid "Restoration..."
msgstr ""
#: imageplugins/freerotation/imageplugin_freerotation.cpp:48
msgid "Free Rotation..."
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:71
#: imageplugins/freerotation/freerotationtool.cpp:304
msgid "Free Rotation"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:75
msgid ""
" This is the free rotation operation preview. If you move the mouse cursor on "
"this preview, a vertical and horizontal dashed line will be drawn to guide you "
"in adjusting the free rotation correction. Release the left mouse button to "
"freeze the dashed line's position."
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:96
#: imageplugins/perspective/perspectivetool.cpp:100
#: imageplugins/sheartool/sheartool.cpp:94
msgid "New width:"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:97
#: imageplugins/freerotation/freerotationtool.cpp:101
#: imageplugins/freerotation/freerotationtool.cpp:296
#: imageplugins/freerotation/freerotationtool.cpp:297
#: imageplugins/perspective/perspectivetool.cpp:101
#: imageplugins/perspective/perspectivetool.cpp:105
#: imageplugins/perspective/perspectivetool.cpp:235
#: imageplugins/perspective/perspectivetool.cpp:236
#: imageplugins/sheartool/sheartool.cpp:95
#: imageplugins/sheartool/sheartool.cpp:99
#: imageplugins/sheartool/sheartool.cpp:308
#: imageplugins/sheartool/sheartool.cpp:309
msgid " px"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:100
#: imageplugins/perspective/perspectivetool.cpp:104
#: imageplugins/sheartool/sheartool.cpp:98
msgid "New height:"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:106
msgid "Main angle:"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:110
msgid ""
" An angle in degrees by which to rotate the image. A positive angle rotates "
"the image clockwise; a negative angle rotates it counter-clockwise."
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:114
msgid "Fine angle:"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:118
msgid ""
" This value in degrees will be added to main angle value to set fine target "
"angle."
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:121
#: imageplugins/sheartool/sheartool.cpp:130
msgid "Anti-Aliasing"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:122
msgid ""
" Enable this option to apply the anti-aliasing filter to the rotated image. "
"In order to smooth the target image, it will be blurred a little."
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:126
msgid "Auto-crop:"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:129
msgid "Widest Area"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:130
msgid "Largest Area"
msgstr ""
#: imageplugins/freerotation/freerotationtool.cpp:132
msgid ""
" Select the method to process image auto-cropping to remove black frames "
"around a rotated image."
msgstr ""
#: imageplugins/distortionfx/imageplugin_distortionfx.cpp:50
msgid "Distortion Effects..."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:76
#: imageplugins/distortionfx/distortionfxtool.cpp:392
msgid "Distortion Effects"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:80
msgid ""
" This is the preview of the distortion effect applied to the photograph."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:98
msgid "Fish Eyes"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:99
msgid "Twirl"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:100
msgid "Cylindrical Hor."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:101
msgid "Cylindrical Vert."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:102
msgid "Cylindrical H/V."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:103
msgid "Caricature"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:104
msgid "Multiple Corners"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:105
msgid "Waves Hor."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:106
msgid "Waves Vert."
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:107
msgid "Block Waves 1"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:108
msgid "Block Waves 2"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:109
msgid "Circular Waves 1"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:110
msgid "Circular Waves 2"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:111
msgid "Polar Coordinates"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:112
msgid "Unpolar Coordinates"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:113
msgid "Tile"
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:115
msgid ""
" Here, select the type of effect to apply to the image."
" Fish Eyes: warps the photograph around a 3D spherical shape to "
"reproduce the common photograph 'Fish Eyes' effect."
" Twirl: spins the photograph to produce a Twirl pattern."
" Cylinder Hor.: warps the photograph around a horizontal cylinder."
" Cylinder Vert.: warps the photograph around a vertical cylinder."
" Cylinder H/V.: warps the photograph around 2 cylinders, vertical and "
"horizontal."
" Caricature: distorts the photograph with the 'Fish Eyes' effect "
"inverted."
" Multiple Corners: splits the photograph like a multiple corners "
"pattern."
" Waves Horizontal: distorts the photograph with horizontal waves."
" Waves Vertical: distorts the photograph with vertical waves."
" Block Waves 1: divides the image into cells and makes it look as if "
"it is being viewed through glass blocks."
" Block Waves 2: like Block Waves 1 but with another version of glass "
"blocks distortion."
" Circular Waves 1: distorts the photograph with circular waves."
" Circular Waves 2: another variation of the Circular Waves effect."
" Polar Coordinates: converts the photograph from rectangular to polar "
"coordinates."
" Unpolar Coordinates: the Polar Coordinates effect inverted."
" Tile: splits the photograph into square blocks and moves them "
"randomly inside the image."
" "
msgstr ""
#: imageplugins/distortionfx/distortionfxtool.cpp:151
msgid ""
" This value controls the iterations to use for Waves, Tile, and Neon effects."
msgstr ""
#: imageplugins/oilpaint/imageplugin_oilpaint.cpp:48
msgid "Oil Paint..."
msgstr ""
#: imageplugins/oilpaint/oilpainttool.cpp:68
#: imageplugins/oilpaint/oilpainttool.cpp:204
msgid "Oil Paint"
msgstr ""
#: imageplugins/oilpaint/oilpainttool.cpp:80
msgid "Brush size:"
msgstr ""
#: imageplugins/oilpaint/oilpainttool.cpp:84
msgid " Set here the brush size to use for simulating the oil painting."
msgstr ""
#: imageplugins/oilpaint/oilpainttool.cpp:93
msgid ""
" This value controls the smoothing effect of the brush under the canvas."
msgstr ""
#: imageplugins/infrared/infraredtool.cpp:67
#: imageplugins/infrared/infraredtool.cpp:222
msgid "Infrared"
msgstr ""
#: imageplugins/infrared/infraredtool.cpp:89
msgid ""
" Set here the ISO-sensitivity of the simulated infrared film. Increasing this "
"value will increase the proportion of green color in the mix. It will also "
"increase the halo effect on the hightlights, and the film graininess (if that "
"box is checked). Note: to simulate an Ilford SFX200 infrared film, use a sensitivity "
"excursion of 200 to 800. A sensitivity over 800 simulates Kodak HIE "
"high-speed infrared film. This last one creates a more dramatic photographic "
"style. This option adds infrared film grain to the image depending on "
"ISO-sensitivity."
msgstr ""
#: imageplugins/infrared/imageplugin_infrared.cpp:49
msgid "Infrared Film..."
msgstr ""
#: imageplugins/perspective/imageplugin_perspective.cpp:47
msgid "Perspective Adjustment..."
msgstr ""
#: imageplugins/perspective/perspectivewidget.cpp:205
msgid "Perspective Adjustment"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:74
msgid "Perspective"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:84
msgid ""
" This is the perspective transformation operation preview. You can use the "
"mouse for dragging the corner to adjust the perspective transformation area."
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:112
msgid "Angles (in degrees):"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:113
msgid " Top left:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:115
msgid " Top right:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:117
msgid " Bottom left:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:119
msgid " Bottom right:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:126
msgid "Draw preview while moving"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:130
msgid "Draw grid"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:134
msgid "Guide color:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:136
#: utilities/imageeditor/editor/editortoolsettings.cpp:146
msgid " Set here the color used to draw guides dashed-lines."
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:140
msgid "Guide width:"
msgstr ""
#: imageplugins/perspective/perspectivetool.cpp:144
#: utilities/imageeditor/editor/editortoolsettings.cpp:150
msgid " Set here the width in pixels used to draw guides dashed-lines."
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:81
msgid "Template Superimpose"
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:91
msgid " This is the preview of the template superimposed onto the image."
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:103
#: utilities/lighttable/lighttablepreview.cpp:378
#: utilities/lighttable/lighttablewindow.cpp:539
msgid "Zoom in"
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:109
#: utilities/lighttable/lighttablepreview.cpp:379
#: utilities/lighttable/lighttablewindow.cpp:544
msgid "Zoom out"
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:140
msgid "Root Directory..."
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:141
msgid " Set here the current templates' root directory."
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:233
msgid "Select Template Root Directory to Use"
msgstr ""
#: imageplugins/superimpose/superimposetool.cpp:262
msgid "Super Impose"
msgstr ""
#: imageplugins/superimpose/imageplugin_superimpose.cpp:49
msgid "Template Superimpose..."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:82
msgid "Hue / Saturation / Lightness"
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:92
msgid ""
" Here you can see the image Hue/Saturation/Lightness adjustments preview. You "
"can pick color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:169
msgid " Select the hue and saturation adjustments of the image here."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:174
msgid ""
" You can see here a color preview of the hue and saturation adjustments."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:179
msgid "Hue:"
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:184
msgid " Set here the hue adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:193
msgid " Set here the saturation adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:197
msgid "Lightness:"
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:202
msgid " Set here the lightness adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/hsl/hsltool.cpp:448
msgid "HSL Adjustments"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:68
msgid "Blur..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:72
msgid "Sharpen..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:76
msgid "Red Eye..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:79
msgid ""
"This filter can be used to correct red eyes in a photo. Select a region "
"including the eyes to use this option."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:82
msgid "Brightness/Contrast/Gamma..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:86
msgid "Hue/Saturation/Lightness..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:91
msgid "Color Balance..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:96
msgid "Auto-Correction..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:101
#: imageplugins/coreplugin/imageplugin_core.cpp:213
msgid "Invert"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:114
msgid "Color Management..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:120
msgid "Black && White..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:127
msgid "Aspect Ratio Crop..."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:232
msgid "Red-Eye Correction Tool"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:233
msgid ""
"You need to select a region including the eyes to use the red-eye correction "
"tool"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:263
msgid "This image is already using a depth of 8 bits / color / pixel."
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:270
msgid ""
"Performing this operation will reduce image color quality. Do you want to "
"continue?"
msgstr ""
#: imageplugins/coreplugin/imageplugin_core.cpp:288
msgid "This image is already using a depth of 16 bits / color / pixel."
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:80
#: imageplugins/coreplugin/rgbtool.cpp:435
msgid "Color Balance"
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:86
msgid ""
" Here you can see the image color-balance adjustments preview. You can pick "
"color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:162
msgid "Cyan"
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:167
msgid " Set here the cyan/red color adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:181
msgid "Magenta"
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:186
msgid " Set here the magenta/green color adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:200
msgid "Yellow"
msgstr ""
#: imageplugins/coreplugin/rgbtool.cpp:205
msgid " Set here the yellow/blue color adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:78
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:654
msgid "Sharpen"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:93
msgid "Method:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:96
msgid "Simple sharp"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:97
msgid "Unsharp mask"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:98
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:669
msgid "Refocus"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:100
msgid " Select the sharpening method to apply to the image."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:121
msgid ""
" A sharpness of 0 has no effect, 1 and above determine the sharpen matrix "
"radius that determines how much to sharpen the image."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:142
msgid ""
" Radius value is the gaussian blur matrix radius value used to determines how "
"much to blur the image."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:145
msgid "Amount:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:150
msgid ""
" The value of the difference between the original and the blur image that is "
"added back into the original."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:158
msgid ""
" The threshold, as a fraction of the maximum luminosity value, needed to "
"apply the difference amount."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:178
msgid "Circular sharpness:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:183
msgid ""
" This is the radius of the circular convolution. It is the most important "
"parameter for using this plugin. For most images the default value of 1.0 "
"should give good results. Select a higher value when your image is very "
"blurred."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:187
msgid "Correlation:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:192
msgid ""
" Increasing the correlation may help to reduce artifacts. The correlation can "
"range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and "
"0.99. Using a high value for the correlation will reduce the sharpening effect "
"of the plugin."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:197
msgid "Noise filter:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:202
msgid ""
" Increasing the noise filter parameter may help to reduce artifacts. The "
"noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. "
"When the noise filter value is too low, e.g. 0.0 the image quality will be very "
"poor. A useful value is 0.01. Using a high value for the noise filter will "
"reduce the sharpening effect of the plugin."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:208
msgid "Gaussian sharpness:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:213
msgid ""
" This is the sharpness for the gaussian convolution. Use this parameter when "
"your blurring is of a Gaussian type. In most cases you should set this "
"parameter to 0, because it causes nasty artifacts. When you use non-zero "
"values, you will probably have to increase the correlation and/or noise filter "
"parameters too."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:218
msgid "Matrix size:"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:222
msgid ""
" This parameter determines the size of the transformation matrix. Increasing "
"the matrix width may give better results, especially when you have chosen large "
"values for circular or gaussian sharpness."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:660
msgid "Unsharp Mask"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:683
msgid "Photograph Refocus Settings File to Load"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:695
msgid "\"%1\" is not a Photograph Refocus settings text file."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:710
msgid "Cannot load settings from the Photograph Refocus text file."
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:719
msgid "Photograph Refocus Settings File to Save"
msgstr ""
#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:736
msgid "Cannot save settings to the Photograph Refocus text file."
msgstr ""
#: imageplugins/coreplugin/bcgtool.cpp:81
msgid "Brightness / Contrast / Gamma"
msgstr ""
#: imageplugins/coreplugin/bcgtool.cpp:88
msgid ""
" Here you can see the image brightness-contrast-gamma adjustments preview. "
"You can pick color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/coreplugin/bcgtool.cpp:164
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:284
msgid " Set here the brightness adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/bcgtool.cpp:170
#: imageplugins/coreplugin/bwsepiatool.cpp:472
#: imageplugins/coreplugin/iccprooftool.cpp:437
#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:290
msgid " Set here the contrast adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/bcgtool.cpp:177
msgid " Set here the gamma adjustment of the image."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:78
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:847
msgid "Aspect Ratio Crop"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:86
msgid ""
" Here you can see the aspect ratio selection preview used for cropping. You "
"can use the mouse to move and resize the crop area. Press and hold the CTRL key "
"to move the opposite corner too. Press and hold the SHIFT key to move the "
"closest corner to the mouse pointer."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:110
msgid "Max. Aspect"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:113
msgid ""
" Set selection area to the maximum size according to the current ratio."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:125
msgid "Ratio:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:129
msgid ""
" Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool "
"uses a relative ratio. That means it is the same if you use centimeters or "
"inches and it doesn't specify the physical size."
" You can see below a correspondence list of traditional photographic paper "
"sizes and aspect ratio crop:"
" 2:3: 10x15cm, 20x30cm, 30x45cm, 4x6\", 8x12\", 12x18\", 16x24\", "
"20x30\""
" 3:4: 6x8cm, 15x20cm, 18x24cm, 30x40cm, 3.75x5\", 4.5x6\", 6x8\", "
"7.5x10\", 9x12\""
" 4:5: 20x25cm, 40x50cm, 8x10\", 16x20\""
" 5:7: 15x21cm, 30x42cm, 5x7\""
" 7:10: 21x30cm, 42x60cm, 3.5x5\""
" The Golden Ratio is 1:1.618. A composition following this rule is "
"considered visually harmonious but can be unadapted to print on standard "
"photographic paper."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:146
msgid "Exact"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:147
msgid " Enable this option to force exact aspect ratio crop."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:149
msgid "Orientation:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:154
msgid " Select constrained aspect ratio orientation."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:156
msgid "Auto"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:157
msgid " Enable this option to automatically set the orientation."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:161
msgid "Custom:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:166
msgid " Set here the desired custom aspect numerator value."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:173
msgid " Set here the desired custom aspect denominator value."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:178
msgid "X:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:181
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:203
msgid " Set here the top left selection corner position for cropping."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:184
#: utilities/imageeditor/tools/imageresize.cpp:180
msgid "Width:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:189
msgid " Set here the width selection for cropping."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:195
msgid " Set width position to center."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:200
msgid "Y:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:206
#: utilities/imageeditor/tools/imageresize.cpp:187
msgid "Height:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:211
msgid " Set here the height selection for cropping."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:217
msgid " Set height position to center."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:244
msgid "Composition guide:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:246
msgid "Rules of Thirds"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:247
msgid "Diagonal Method"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:248
msgid "Harmonious Triangles"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:249
msgid "Golden Mean"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:252
msgid ""
" With this option, you can display guide lines which help you to compose your "
"photograph."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:255
msgid "Golden sections"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:256
msgid " Enable this option to show golden sections."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:258
msgid "Golden spiral sections"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:259
msgid " Enable this option to show golden spiral sections."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:261
msgid "Golden spiral"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:262
msgid " Enable this option to show golden spiral guide."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:264
msgid "Golden triangles"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:265
msgid " Enable this option to show golden triangles."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:267
msgid "Flip horizontally"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:268
msgid " Enable this option to flip horizontally guidelines."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:270
msgid "Flip vertically"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:271
msgid " Enable this option to flip vertically guidelines."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:273
msgid "Color and width:"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:278
msgid " Set here the color used to draw composition guides."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:279
msgid " Set here the width in pixels used to draw composition guides."
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:565
msgid "Custom"
msgstr ""
#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:583
msgid "Golden Ratio"
msgstr ""
#: imageplugins/coreplugin/blurtool.cpp:66
msgid "Blur"
msgstr ""
#: imageplugins/coreplugin/blurtool.cpp:78
msgid "Smoothness:"
msgstr ""
#: imageplugins/coreplugin/blurtool.cpp:83
msgid ""
" A smoothness of 0 has no effect, 1 and above determine the Gaussian blur "
"matrix radius that determines how much to blur the image."
msgstr ""
#: imageplugins/coreplugin/blurtool.cpp:161
msgid "Gaussian Blur"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:116
msgid ""
" Here you can see the image preview after applying a color profile Select the histogram channel to display here:"
" Luminosity: display the image's luminosity values."
" Red: display the red channel values."
" Green: display the green channel values."
" Blue: display the blue channel values."
" "
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:181
msgid ""
" Here you can see the target preview image histogram of the selected image "
"channel. This one is updated after setting changes."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:205
msgid " Here you can set general parameters. Rendering emulation of the device described by the \"Proofing\" profile. "
"Useful to preview the final result without rendering to physical medium. You can use this option if you want to show the colors that are outside the "
"printer's gamut"
" "
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:222
msgid "Assign profile"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:223
msgid ""
" You can use this option to embed the selected workspace color profile into "
"the image. The Black Point Compensation (BPC) feature does work in conjunction with "
"Relative Colorimetric Intent. Perceptual intent should make no difference, "
"since BPC is always on, and in Absolute Colorimetric Intent it is always turned "
"off. BPC does compensate for a lack of ICC profiles in the dark tone rendering. "
"With BPC the dark tones are optimally mapped (no clipping) from original media "
"to the destination rendering media, e.g. the combination of paper and ink. Set here all parameters relevant of Input Color Profiles. Set here all parameters relevant to Color Workspace Profiles. Set here all parameters relevant to Proofing Color Profiles. Set here all lightness adjustments to the target image. This is the curve adjustment of the image luminosity"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:563
msgid ""
"The ICC profiles path seems to be invalid. You won't be able to use the "
"\"Default profile\" options."
" Please fix this in the digiKam ICC setup."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:758
msgid ""
" The selected ICC input profile path seems to be invalid."
" Please check it."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:777
#: imageplugins/coreplugin/iccprooftool.cpp:939
msgid ""
" The selected ICC proof profile path seems to be invalid."
" Please check it."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:799
#: imageplugins/coreplugin/iccprooftool.cpp:961
msgid ""
" Selected ICC workspace profile path seems to be invalid."
" Please check it."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:837
msgid ""
" Your settings are not sufficient. To apply a color transform, you need at least two ICC profiles: If you want to do a \"soft-proof\" transform, in addition to these profiles "
"you need a \"Proof\" profile. Selected ICC input profile path seems to be invalid."
" Please check it."
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:1049
msgid " You have selected the \"Default builtin sRGB profile\" This profile is built on the fly, so there is no relevant information about "
"it. You have not enabled Color Management in the digiKam preferences. \"Use of default profile\" options will be disabled now. Here you can see the image selection preview with red eye reduction applied."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:110
msgid ""
" Select the histogram channel to display here:"
" Luminosity: display the image's luminosity values."
" Red: display the red image channel values."
" Green: display the green image channel values."
" Blue: display the blue image channel values."
" "
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:120
msgid ""
" Select the histogram scale here."
" If the image's maximum counts are small, you can use the linear scale."
" The logarithmic scale can be used when the maximal counts are big to show "
"all values (small and large) on the graph."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:151
msgid ""
" Here you can see the target preview image histogram of the selected image "
"channel. It is updated upon setting changes."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:165
msgid ""
" Sets the red color pixels selection threshold. Low values will select more "
"red color pixels (agressive correction), high values less (mild correction). "
"Use low value if eye have been selected exactly. Use high value if other parts "
"of the face are also selected."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:174
msgid ""
" Sets the smoothness value when blurring the border of the changed pixels. "
"This leads to a more naturally looking pupil."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:178
msgid "Coloring Tint:"
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:183
msgid " Sets a custom color to re-colorize the eyes."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:185
msgid "Tint Level:"
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:189
msgid ""
" Set the tint level to adjust the luminosity of the new color of the pupil."
msgstr ""
#: imageplugins/coreplugin/redeyetool.cpp:403
msgid "Red Eyes Correction"
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:165
msgid "Black && White"
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:178
msgid ""
" Here you can see the black and white conversion tool preview. You can pick "
"color on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:266
msgid "Generic"
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:267
msgid "Generic: Simulate a generic black and white film Simulate the Agfa 200X black and white film at 200 ISO Simulate the Agfa Pan black and white film at 25 ISO Simulate the Agfa Pan black and white film at 100 ISO Simulate the Agfa Pan black and white film at 400 ISO Simulate the Ilford Delta black and white film at 100 ISO Simulate the Ilford Delta black and white film at 400 ISO Simulate the Ilford Delta 400 Pro black and white film at 3200 ISO Simulate the Ilford FP4 Plus black and white film at 125 ISO Simulate the Ilford HP5 Plus black and white film at 400 ISO Simulate the Ilford PanF Plus black and white film at 50 ISO Simulate the Ilford XP2 Super black and white film at 400 ISO Simulate the Kodak Tmax black and white film at 100 ISO Simulate the Kodak Tmax black and white film at 400 ISO Simulate the Kodak TriX black and white film at 400 ISO Do not apply a lens filter when rendering the image. Simulate black and white film exposure using a green filter. This is usefule "
"for all scenic shoots, especially portraits photographed against the sky. Simulate black and white film exposure using an orange filter. This will "
"enhance landscapes, marine scenes and aerial photography. Simulate black and white film exposure using a red filter. This creates "
"dramatic sky effects, and simulates moonlight scenes in the daytime. Simulate black and white film exposure using a yellow filter. This has the "
"most natural tonal correction, and improves contrast. Ideal for landscapes. Here, set the strength adjustment of the lens filter."
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:401
msgid "No Tone Filter"
msgstr ""
#: imageplugins/coreplugin/bwsepiatool.cpp:402
msgid "No Tone Filter: Do not apply a tone filter to the image. Gives a warm highlight and mid-tone while adding a bit of coolness to the "
"shadows - very similar to the process of bleaching a print and re-developing in "
"a sepia toner. This filter is more neutral than the Sepia Tone filter. Start subtle and replicates printing on a cold tone black and white paper "
"such as a bromide enlarging paper. This effect replicates traditional selenium chemical toning done in the "
"darkroom. This effect replicates traditional platinum chemical toning done in the "
"darkroom. This effect is also known as Verdante. Here you can see the auto-color correction tool preview. You can pick color "
"on image to see the color level corresponding on histogram."
msgstr ""
#: imageplugins/coreplugin/autocorrectiontool.cpp:168
#: imageplugins/coreplugin/autocorrectiontool.cpp:378
msgid "Auto Levels"
msgstr ""
#: imageplugins/coreplugin/autocorrectiontool.cpp:169
msgid ""
"Auto Levels:"
" This option maximizes the tonal range in the Red, Green, and Blue channels. "
"It searches the image shadow and highlight limit values and adjusts the Red, "
"Green, and Blue channels to a full histogram range. This option scales brightness values across the active image so that the "
"darkest point becomes black, and the brightest point becomes as bright as "
"possible without altering its hue. This is often a \"magic fix\" for images "
"that are dim or washed out. This option adjusts the brightness of colors across the active image so that "
"the histogram for the value channel is as nearly as possible flat, that is, so "
"that each possible brightness value appears at about the same number of pixels "
"as each other value. Sometimes Equalize works wonderfully at enhancing the "
"contrasts in an image. Other times it gives garbage. It is a very powerful "
"operation, which can either work miracles on an image or destroy it. This option enhances the contrast and brightness of the RGB values of an "
"image by stretching the lowest and highest values to their fullest range, "
"adjusting everything in between. This option enhances the contrast and brightness of the RGB values of an "
"image to calculate optimal exposition and black level using image histogram "
"properties. This is the shear operation preview. If you move the mouse cursor on this "
"preview, a vertical and horizontal dashed line will be drawn to guide you in "
"adjusting the shear correction. Release the left mouse button to freeze the "
"dashed line's position."
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:104
msgid "Main horizontal angle:"
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:108
msgid " The main horizontal shearing angle, in degrees."
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:110
msgid "Fine horizontal angle:"
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:114
msgid ""
" This value in degrees will be added to main horizontal angle value to set "
"fine adjustments."
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:117
msgid "Main vertical angle:"
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:121
msgid " The main vertical shearing angle, in degrees."
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:123
msgid "Fine vertical angle:"
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:127
msgid ""
" This value in degrees will be added to main vertical angle value to set fine "
"adjustments."
msgstr ""
#: imageplugins/sheartool/sheartool.cpp:131
msgid ""
" Enable this option to apply the anti-aliasing filter to the sheared image. "
"To smooth the target image, it will be blurred a little."
msgstr ""
#: imageplugins/lensdistortion/imageplugin_lensdistortion.cpp:47
msgid "Lens Distortion..."
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:76
#: imageplugins/lensdistortion/lensdistortiontool.cpp:315
msgid "Lens Distortion"
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:94
msgid ""
" You can see here a thumbnail preview of the distortion correction applied to "
"a cross pattern."
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:105
msgid ""
" This value controls the amount of distortion. Negative values correct lens "
"barrel distortion, while positive values correct lens pincushion distortion."
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:110
msgid "Edge:"
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:116
msgid ""
" This value controls in the same manner as the Main control, but has more "
"effect at the edges of the image than at the center."
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:121
msgid "Zoom:"
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:127
msgid " This value rescales the overall image size."
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:131
msgid "Brighten:"
msgstr ""
#: imageplugins/lensdistortion/lensdistortiontool.cpp:137
msgid " This value adjusts the brightness in image corners."
msgstr ""
#: imageplugins/inpainting/imageplugin_inpainting.cpp:51
msgid "Inpainting..."
msgstr ""
#: imageplugins/inpainting/imageplugin_inpainting.cpp:56
msgid ""
"This filter can be used to inpaint a part in a photo. Select a region to "
"inpaint to use this option."
msgstr ""
#: imageplugins/inpainting/imageplugin_inpainting.cpp:84
msgid "Inpainting Photograph Tool"
msgstr ""
#: imageplugins/inpainting/imageplugin_inpainting.cpp:85
msgid "You need to select a region to inpaint to use this tool"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:89
msgid "Inpainting"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:95
msgid ""
" Here you can see the image selection preview with inpainting applied."
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:127
msgid "Remove Small Artefact"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:128
msgid "Remove Medium Artefact"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:129
msgid "Remove Large Artefact"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:130
msgid ""
" Select the filter preset to use for photograph restoration:"
" None: Most common values. Puts settings to default."
" Remove Small Artefact: inpaint small image artefact like image "
"glitch."
" Remove Medium Artefact: inpaint medium image artefact."
" Remove Large Artefact: inpaint image artefact like unwanted object."
" "
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:378
msgid "InPainting"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:385
msgid "Photograph Inpainting Settings File to Load"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:396
msgid "\"%1\" is not a Photograph Inpainting settings text file."
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:403
msgid "Cannot load settings from the Photograph Inpainting text file."
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:416
msgid "Photograph Inpainting Settings File to Save"
msgstr ""
#: imageplugins/inpainting/inpaintingtool.cpp:425
msgid "Cannot save settings to the Photograph Inpainting text file."
msgstr ""
#: tips.cpp:3
msgid ""
" \n"
" \n"
" \n"
" \n"
" \n"
" \n"
" \n"
" \n"
" \n"
" \n"
"
lossy compression"
"
image format!\n"
"
"
msgstr ""
#: libs/imageproperties/imagedescedittab.cpp:433
msgid "
Note that all subalbums are included in this list and will be "
"deleted permanently as well.
Note that all subalbums are included in this list and will be moved "
"to Trash as well.Welcome to digiKam %1
"
""
"
\n"
"%8\n"
"\n"
"%5
\n"
"%6\n"
""
"
Ex.: \"Country/City/Paris\"
Ex.: \"City/Paris, Monument/Notre-Dame\"
\"%1\"
\"%1\"
fixed or relative
to environment"
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:240
msgid ""
"Here you can switch between fixed a font size and a font size to be calculated "
"dynamically and adjusted to any changing environment (e.g. widget dimensions, "
"paper size)."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:265
msgid "Here you can choose the font size to be used."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:290
msgid "Actual Font"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:78
#: imageplugins/inserttext/inserttexttool.cpp:331
msgid "Insert Text"
msgstr ""
#: imageplugins/inserttext/inserttexttool.cpp:88
msgid ""
""
"
"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:276
#: utilities/setup/setupicc.cpp:171
msgid "Visit Little CMS project website"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:289
msgid "Input Profile"
msgstr ""
#: imageplugins/coreplugin/iccprooftool.cpp:290
msgid "
In other words, if certain colors in an image fall outside of the range of "
"colors that the output device can render, the image intent will cause all the "
"colors in the image to be adjusted so that every color in the image falls "
"within the range that can be rendered and so that the relationship between "
"colors is preserved as much as possible."
"
This intent is most suitable for display of photographs and images, and is "
"the default intent.
This intent preserves the white point and is most suitable for spot colors "
"(Pantone, TruMatch, logo colors, ...).
Implementation of this intent remains somewhat problematic, and the ICC is "
"still working on methods to achieve the desired effects."
"
This intent is most suitable for business graphics such as charts, where it "
"is more important that the colors be vivid and contrast well with each other "
"rather than a specific color."
"
"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that digiKam supports Drag'n'Drop? So you can easily move images "
"from Konqueror to digiKam or from digiKam to K3b simply by using "
"\"Drag'n'Drop\".\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that you can use nested albums in digiKam.\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that you can view the Exif, MakerNotes, and IPTC "
"photo information by using the Metadata sidebar tab?\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that each photo has a context menu that can be reached by clicking on it "
"with the right mouse button?\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that albums in digiKam are folders in your Album Library? So you can easily "
"import your photos by simply copying them to your Album Library.\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that you can customize your digiKam toolbars using Settings -> "
"Configure Toolbars...?\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that you can reach other users through the digiKam-users mailing list? "
"Subscribe to it at this url.\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that digiKam has multiple plugins with extra features like "
"HTML export, Archive to CD, Slideshow"
",... and that you are welcome to write your own plugins? You can find more "
"information at this url.\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
" \n"
"... that you have direct access to the TDE Gamma Configuration using Tools -> "
"Gamma Adjustment?\n"
" \n"
"\n"
"
\n"
"\n"
" \n"
"\n"
"\n"
" \n"
"\n"
"... that you can print images using the Print Wizard? You can start it using "
"Album -> Export -> Print Wizard.\n"
" \n"
"
\n" "
\n" " | \n" "\n" "... that you can use the PNG file format instead of TIFF " "for good compression without losing image quality?\n" " | \n" "
\n" "
\n" " | \n" "\n" "... that most of the settings in a dialog box have What's this? " "information available, which can be reached via the right mouse button?\n" " | \n" "
\n" "
\n" "\n" " | \n" "\n" "... that because the PNG file format uses a lossless compression algorithm, you " "can use the max compression level with this file format?\n" " | \n" "
\n" "
\n" "\n" " | \n" "\n" "... that you can print the current image opened in the digiKam image editor?\n" " | \n" "
\n" "
\n" "\n" " | \n" "\n" "... that you can edit the comments of the current image opened in the digiKam " "image editor using Comments and Tags sidebar tab?\n" " | \n" "
\n" "
\n" "\n" " | \n" "\n" "... that you could use <Page Down> and <Page Up> on your keyboard " "to switch between photos in the image editor?\n" " | \n" "
Set this option to automatically synchronize zooming and panning between " "left and right panels if the images have the same size." msgstr "" #: utilities/setup/setuplighttable.cpp:82 msgid "Selecting a thumbbar item loads image to the right panel" msgstr "" #: utilities/setup/setuplighttable.cpp:84 msgid "" "
Set this option to automatically load an image into the right panel when the " "corresponding item is selected on the thumbbar." msgstr "" #: utilities/setup/setuplighttable.cpp:87 msgid "Load full image size" msgstr "" #: utilities/setup/setuplighttable.cpp:88 msgid "" "
Set this option to load full image size into the preview panel instead of a " "reduced size. Because this option will take more time to load images, use it " "only if you have a fast computer." msgstr "" #: utilities/setup/setupmetadata.cpp:106 msgid "IPTC Actions" msgstr "" #: utilities/setup/setupmetadata.cpp:109 msgid "&Save image tags as \"Keywords\" tag" msgstr "" #: utilities/setup/setupmetadata.cpp:110 msgid "" "
Turn this option on to store the image tags in the IPTC Keywords tag." msgstr "" #: utilities/setup/setupmetadata.cpp:114 msgid "&Save default photographer identity as tags" msgstr "" #: utilities/setup/setupmetadata.cpp:115 msgid "" "
Turn this option on to store the default photographer identity in the IPTC " "tags. You can set this value in the Identity setup page." msgstr "" #: utilities/setup/setupmetadata.cpp:120 msgid "&Save default credit and copyright identity as tags" msgstr "" #: utilities/setup/setupmetadata.cpp:121 msgid "" "
Turn this option on to store the default credit and copyright identity in " "the IPTC tags. You can set this value in the Identity setup page." msgstr "" #: utilities/setup/setupmetadata.cpp:127 msgid "Common Metadata Actions" msgstr "" #: utilities/setup/setupmetadata.cpp:130 msgid "&Save image captions as embedded text" msgstr "" #: utilities/setup/setupmetadata.cpp:131 msgid "" "
Turn this option on to store image captions in the JFIF section, EXIF tag, " "and IPTC tag." msgstr "" #: utilities/setup/setupmetadata.cpp:135 msgid "&Save image timestamps as tags" msgstr "" #: utilities/setup/setupmetadata.cpp:136 msgid "" "
Turn this option on to store the image date and time in the EXIF and IPTC " "tags." msgstr "" #: utilities/setup/setupmetadata.cpp:140 msgid "&Save image rating as tags" msgstr "" #: utilities/setup/setupmetadata.cpp:141 msgid "" "
Turn this option on to store the image rating in the EXIF tag and IPTC " "Urgency tag." msgstr "" #: utilities/setup/setupmetadata.cpp:154 msgid "Visit Exiv2 project website" msgstr "" #: utilities/setup/setupmetadata.cpp:157 msgid "" "
EXIF " "is a standard used by most digital cameras today to store technical " "informations about photograph.
" "IPTC " "is an standard used in digital photography to store photographer informations " "in pictures.
" msgstr "" #: utilities/setup/setupplugins.cpp:78 msgid "A list of available Kipi plugins appears below." msgstr "" #: utilities/setup/setupplugins.cpp:95 #, c-format msgid "" "_n: 1 Kipi plugin found\n" "%n Kipi plugins found" msgstr "" #: utilities/setup/setupslideshow.cpp:84 msgid "&Delay between images:" msgstr "" #: utilities/setup/setupslideshow.cpp:85 msgid "
The delay, in seconds, between images." msgstr "" #: utilities/setup/setupslideshow.cpp:87 msgid "Start with current image" msgstr "" #: utilities/setup/setupslideshow.cpp:88 msgid "" "
If this option is enabled, slideshow will be started with currently selected " "image." msgstr "" #: utilities/setup/setupslideshow.cpp:91 msgid "Display in a loop" msgstr "" #: utilities/setup/setupslideshow.cpp:92 msgid "
Run the slideshow in endless repetition." msgstr "" #: utilities/setup/setupslideshow.cpp:94 msgid "Print image file name" msgstr "" #: utilities/setup/setupslideshow.cpp:95 msgid "
Print the image file name at the bottom of the screen." msgstr "" #: utilities/setup/setupslideshow.cpp:97 msgid "Print image creation date" msgstr "" #: utilities/setup/setupslideshow.cpp:98 msgid "
Print the image creation time/date at the bottom of the screen." msgstr "" #: utilities/setup/setupslideshow.cpp:100 msgid "Print camera aperture and focal length" msgstr "" #: utilities/setup/setupslideshow.cpp:101 msgid "" "
Print the camera aperture and focal length at the bottom of the screen." msgstr "" #: utilities/setup/setupslideshow.cpp:103 msgid "Print camera exposure and sensitivity" msgstr "" #: utilities/setup/setupslideshow.cpp:104 msgid "" "
Print the camera exposure and sensitivity at the bottom of the screen." msgstr "" #: utilities/setup/setupslideshow.cpp:106 msgid "Print camera make and model" msgstr "" #: utilities/setup/setupslideshow.cpp:107 msgid "
Print the camera make and model at the bottom of the screen." msgstr "" #: utilities/setup/setupslideshow.cpp:109 msgid "Print image caption" msgstr "" #: utilities/setup/setupslideshow.cpp:110 msgid "
Print the image caption at the bottom of the screen." msgstr "" #: utilities/setup/setupmime.cpp:94 msgid "Show only &image files with extensions:" msgstr "" #: utilities/setup/setupmime.cpp:98 msgid "" "
Here you can set the extensions of image files to be displayed in Albums " "(such as JPEG or TIFF); clicking on these files will open them in the digiKam " "Image Editor." msgstr "" #: utilities/setup/setupmime.cpp:107 utilities/setup/setupmime.cpp:138 #: utilities/setup/setupmime.cpp:169 utilities/setup/setupmime.cpp:199 msgid "Revert to default settings" msgstr "" #: utilities/setup/setupmime.cpp:125 msgid "Show only &movie files with extensions:" msgstr "" #: utilities/setup/setupmime.cpp:129 msgid "" "
Here you can set the extensions of movie files to be displayed in Albums " "(such as MPEG or AVI); clicking on these files will open them with the default " "TDE movie player." msgstr "" #: utilities/setup/setupmime.cpp:156 msgid "Show only &audio files with extensions:" msgstr "" #: utilities/setup/setupmime.cpp:160 msgid "" "
Here you can set the extensions of audio files to be displayed in Albums " "(such as MP3 or OGG); clicking on these files will open them with the default " "TDE audio player." msgstr "" #: utilities/setup/setupmime.cpp:187 msgid "Show only &RAW files with extensions:" msgstr "" #: utilities/setup/setupmime.cpp:191 msgid "" "
Here you can set the extensions of RAW image files to be displayed in Albums " "(such as CRW, for Canon cameras, or NEF, for Nikon cameras)." msgstr "" #: utilities/setup/setupmisc.cpp:72 msgid "Show confirmation dialog when moving items to the &trash" msgstr "" #: utilities/setup/setupmisc.cpp:77 msgid "Apply changes in the &right sidebar without confirmation" msgstr "" #: utilities/setup/setupmisc.cpp:87 msgid "&Scan for new items on startup (slows down startup)" msgstr "" #: utilities/setup/setupidentity.cpp:81 msgid "Photographer and Copyright Information" msgstr "" #: utilities/setup/setupidentity.cpp:84 msgid "Author:" msgstr "" #: utilities/setup/setupidentity.cpp:91 msgid "" "
This field should contain your name, or the name of the person who created " "the photograph. If it is not appropriate to add the name of the photographer " "(for example, if the identify of the photographer needs to be protected) the " "name of a company or organization can also be used. Once saved, this field " "should not be changed by anyone. This field does not support the use of commas " "or semi-colons as separator. \n" "This field is limited to 32 ASCII characters.
" msgstr "" #: utilities/setup/setupidentity.cpp:97 msgid "Author Title:" msgstr "" #: utilities/setup/setupidentity.cpp:104 msgid "" "This field should contain the job title of the photographer. Examples might " "include titles such as: Staff Photographer, Freelance Photographer, or " "Independent Commercial Photographer. Since this is a qualifier for the Author " "field, the Author field must also be filled out. \n" "This field is limited to 32 ASCII characters.
" msgstr "" #: utilities/setup/setupidentity.cpp:111 msgid "Credit and Copyright" msgstr "" #: utilities/setup/setupidentity.cpp:114 msgid "Credit:" msgstr "" #: utilities/setup/setupidentity.cpp:121 msgid "" "(synonymous to Provider): Use the Provider field to identify who is " "providing the photograph. This does not necessarily have to be the author. If a " "photographer is working for a news agency such as Reuters or the Associated " "Press, these organizations could be listed here as they are \"providing\" the " "image for use by others. If the image is a stock photograph, then the group " "(agency) involved in supplying the image should be listed here. \n" "This field is limited to 32 ASCII characters.
" msgstr "" #: utilities/setup/setupidentity.cpp:128 msgid "Source:" msgstr "" #: utilities/setup/setupidentity.cpp:135 msgid "" "The Source field should be used to identify the original owner or copyright " "holder of the photograph. The value of this field should never be changed after " "the information is entered following the image's creation. While not yet " "enforced by the custom panels, you should consider this to be a \"write-once\" " "field. The source could be an individual, an agency, or a member of an agency. " "To aid in later searches, it is suggested to separate any slashes \"/\" with a " "blank space. Use the form \"photographer / agency\" rather than " "\"photographer/agency.\" Source may also be different from Creator and from the " "names listed in the Copyright Notice.\n" "This field is limited to 32 ASCII characters.
" msgstr "" #: utilities/setup/setupidentity.cpp:144 msgid "Copyright:" msgstr "" #: utilities/setup/setupidentity.cpp:151 msgid "" "The Copyright Notice should contain any necessary copyright notice for " "claiming the intellectual property, and should identify the current owner(s) of " "the copyright for the photograph. Usually, this would be the photographer, but " "if the image was done by an employee or as work-for-hire, then the agency or " "company should be listed. Use the form appropriate to your country. USA: © " "{date of first publication} name of copyright owner, as in \"©2005 John " "Doe.\" Note, the word \"copyright\" or the abbreviation \"copr\" may be used in " "place of the © symbol. In some foreign countries only the copyright symbol " "is recognized and the abbreviation does not work. Furthermore the copyright " "symbol must be a full circle with a \"c\" inside; using something like (c) " "where the parentheses form a partial circle is not sufficient. For additional " "protection worldwide, use of the phrase, \"all rights reserved\" following the " "notice above is encouraged. \n" "In Europe you would use: Copyright {Year} {Copyright owner}, all rights " "reserved. \n" "In Japan, for maximum protection, the following three items should appear in " "the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the " "first publication; and (c) name of the author. You may also wish to include the " "phrase \"all rights reserved.\"\n" "This field is limited to 128 ASCII characters.
" msgstr "" #: utilities/setup/setupidentity.cpp:169 msgid "" "Note: These informations are used to set IPTC " "tags contents. IPTC text tags only support the printable " "ASCII " "characters set and limit strings size. Use contextual help for details." msgstr "" #: utilities/setup/setupcollections.cpp:94 msgid "" "You can add or remove Album collection types here to improve how your Albums " "are sorted in digiKam." msgstr "" #: utilities/setup/setupcamera.cpp:103 #: utilities/setup/setupcollections.cpp:100 msgid "&Add..." msgstr "" #: utilities/setup/setupcollections.cpp:180 #: utilities/setup/setupcollections.cpp:185 msgid "New Collection Name" msgstr "" #: utilities/setup/setupcollections.cpp:181 #: utilities/setup/setupcollections.cpp:186 msgid "Enter new collection name:" msgstr "" #: utilities/setup/setupeditor.cpp:97 msgid "
Customize background color to use in image editor area." msgstr "" #: utilities/setup/setupeditor.cpp:115 msgid "" "
Customize the color used in image editor to identify under-exposed pixels." msgstr "" #: utilities/setup/setupeditor.cpp:122 msgid "" "
Customize the color used in image editor to identify over-exposed pixels." msgstr "" #: utilities/setup/setupcamera.cpp:87 msgid "Title" msgstr "" #: utilities/setup/setupcamera.cpp:89 msgid "Port" msgstr "" #: utilities/setup/setupcamera.cpp:90 msgid "Path" msgstr "" #: utilities/setup/setupcamera.cpp:93 msgid "" "
Here you can see the digital camera list used by digiKam via the Gphoto " "interface." msgstr "" #: utilities/setup/setupcamera.cpp:107 msgid "&Edit..." msgstr "" #: utilities/setup/setupcamera.cpp:109 msgid "Auto-&Detect" msgstr "" #: utilities/setup/setupcamera.cpp:122 msgid "Visit Gphoto project website" msgstr "" #: utilities/setup/setupcamera.cpp:245 msgid "" "Failed to auto-detect camera.\n" "Please check if your camera is turned on and retry or try setting it manually." msgstr "" #: utilities/setup/setupcamera.cpp:257 msgid "Camera '%1' (%2) is already in list." msgstr "" #: utilities/setup/setupcamera.cpp:261 msgid "Found camera '%1' (%2) and added it to the list." msgstr "" #: utilities/setup/setup.cpp:142 msgid "Album Settings" msgstr "" #: utilities/setup/setup.cpp:146 msgid "Collections" msgstr "" #: utilities/setup/setup.cpp:146 msgid "Album Collections" msgstr "" #: utilities/setup/setup.cpp:150 msgid "Identity" msgstr "" #: utilities/setup/setup.cpp:150 msgid "Default IPTC identity information" msgstr "" #: utilities/setup/setup.cpp:154 msgid "Embedded Image Information Management" msgstr "" #: utilities/setup/setup.cpp:158 msgid "Album Items Tool Tip Settings" msgstr "" #: utilities/setup/setup.cpp:162 msgid "Mime Types" msgstr "" #: utilities/setup/setup.cpp:162 msgid "File (MIME) Types Settings" msgstr "" #: utilities/setup/setup.cpp:166 msgid "Light Table Settings" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:449 #: utilities/setup/setup.cpp:170 msgid "Image Editor" msgstr "" #: utilities/setup/setup.cpp:170 msgid "Image Editor General Settings" msgstr "" #: utilities/setup/setup.cpp:174 msgid "Image Editor: Settings for Saving Images Files" msgstr "" #: utilities/setup/setup.cpp:182 msgid "Image Editor Color Management Settings" msgstr "" #: utilities/setup/setup.cpp:186 msgid "Kipi Plugins" msgstr "" #: utilities/setup/setup.cpp:186 msgid "Main Interface Plug-in Settings" msgstr "" #: utilities/setup/setup.cpp:194 msgid "Cameras" msgstr "" #: utilities/setup/setup.cpp:194 msgid "Camera Settings" msgstr "" #: utilities/setup/setup.cpp:198 msgid "Miscellaneous Settings" msgstr "" #: utilities/setup/setup.cpp:245 msgid "" "The Exif auto-rotate thumbnails option has been changed.\n" "Do you want to rebuild all albums' items' thumbnails now?\n" "\n" "Note: thumbnail processing can take a while! You can start this job later from " "the \"Tools\" menu." msgstr "" #: utilities/setup/setupgeneral.cpp:113 msgid "Album &Library Path" msgstr "" #: utilities/setup/setupgeneral.cpp:117 msgid "" "
Here you can set the main path to the digiKam album library in your " "computer." "
Write access is required for this path and do not use a remote path here, " "like an NFS mounted file system." msgstr "" #: utilities/setup/setupgeneral.cpp:132 msgid "Thumbnail Information" msgstr "" #: utilities/setup/setupgeneral.cpp:134 msgid "Show file &name" msgstr "" #: utilities/setup/setupgeneral.cpp:135 msgid "
Set this option to show the file name below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:137 msgid "Show file si&ze" msgstr "" #: utilities/setup/setupgeneral.cpp:138 msgid "
Set this option to show the file size below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:140 msgid "Show camera creation &date" msgstr "" #: utilities/setup/setupgeneral.cpp:141 msgid "" "
Set this option to show the camera creation date below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:144 msgid "Show file &modification date" msgstr "" #: utilities/setup/setupgeneral.cpp:145 msgid "" "
Set this option to show the file modification date below the image " "thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:148 msgid "Show digiKam &captions" msgstr "" #: utilities/setup/setupgeneral.cpp:149 msgid "" "
Set this option to show the digiKam captions below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:152 msgid "Show digiKam &tags" msgstr "" #: utilities/setup/setupgeneral.cpp:153 msgid "
Set this option to show the digiKam tags below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:156 msgid "Show digiKam &rating" msgstr "" #: utilities/setup/setupgeneral.cpp:157 msgid "" "
Set this option to show the digiKam rating below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:160 msgid "Show ima&ge dimensions (warning: slow)" msgstr "" #: utilities/setup/setupgeneral.cpp:161 msgid "" "
Set this option to show the image size in pixels below the image thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:173 msgid "Sidebar thumbnail size:" msgstr "" #: utilities/setup/setupgeneral.cpp:179 msgid "" "
Set this option to configure the size in pixels of the thumbnails in " "digiKam's sidebars. This option will take effect when you restart digiKam." msgstr "" #: utilities/setup/setupgeneral.cpp:186 msgid "Show count of items in all tree-view" msgstr "" #: utilities/setup/setupgeneral.cpp:190 msgid "Thumbnail click action:" msgstr "" #: utilities/setup/setupgeneral.cpp:192 msgid "Show embedded preview" msgstr "" #: utilities/setup/setupgeneral.cpp:193 msgid "Start image editor" msgstr "" #: utilities/setup/setupgeneral.cpp:194 msgid "
Here, choose what should happen when you click on a thumbnail." msgstr "" #: utilities/setup/setupgeneral.cpp:199 msgid "Embedded preview loads full image size" msgstr "" #: utilities/setup/setupgeneral.cpp:200 msgid "" "
Set this option to load the full image size with an embedded preview, " "instead a reduced one. Because this option will take more time to load images, " "use it only if you have a fast computer." msgstr "" #: utilities/setup/setupgeneral.cpp:281 msgid "Sorry you can't use your home directory as album library." msgstr "" #: utilities/setup/setupgeneral.cpp:289 msgid "" "No write access for this path.\n" "Warning: the caption and tag features will not work." msgstr "" #: utilities/setup/setupicc.cpp:157 msgid "Color Management Policy" msgstr "" #: utilities/setup/setupicc.cpp:161 msgid "Enable Color Management" msgstr "" #: utilities/setup/setupicc.cpp:162 msgid "" "
If this option is enabled, digiKam applies the Workspace default color " "profile to an image, without prompting you about missing embedded profiles or " "embedded profiles different from the workspace profile.
" msgstr "" #: utilities/setup/setupicc.cpp:185 msgid "Ask when opening an image in the Image Editor" msgstr "" #: utilities/setup/setupicc.cpp:186 msgid "" "If this option is enabled, digiKam asks to user before it applies the " "Workspace default color profile to an image which has no embedded profile or, " "if the image has an embedded profile, when it's not the same as the workspace " "profile.
" msgstr "" #: utilities/setup/setupicc.cpp:201 msgid "Color Profiles Directory" msgstr "" #: utilities/setup/setupicc.cpp:206 msgid "" "Default path to the color profiles folder. You must store all your color " "profiles in this directory.
" msgstr "" #: utilities/setup/setupicc.cpp:213 msgid "ICC Profiles Settings" msgstr "" #: utilities/setup/setupicc.cpp:218 msgid "Use color managed view (warning: slow)" msgstr "" #: utilities/setup/setupicc.cpp:219 msgid "" "Turn on this option if you want to use your Monitor Color Profile " "to show your pictures in the Image Editor window with a color correction " "adapted to your monitor. Warning: this option can take a while to render " "pictures on the screen, especially with a slow computer.
" msgstr "" #: utilities/setup/setupicc.cpp:227 msgid "Monitor:" msgstr "" #: utilities/setup/setupicc.cpp:230 msgid "" "Select the color profile for your monitor. You need to enable the " "Use color managed view option to use this profile.
" msgstr "" #: utilities/setup/setupicc.cpp:233 msgid "" "You can use this button to get more detailed information about the selected " "monitor profile.
" msgstr "" #: utilities/setup/setupicc.cpp:244 msgid "Workspace:" msgstr "" #: utilities/setup/setupicc.cpp:247 msgid "" "All the images will be converted to the color space of this profile, so you " "must select a profile appropriate for editing.
" "These color profiles are device independent.
" msgstr "" #: utilities/setup/setupicc.cpp:251 msgid "" "You can use this button to get more detailed information about the selected " "workspace profile.
" msgstr "" #: utilities/setup/setupicc.cpp:261 msgid "Input:" msgstr "" #: utilities/setup/setupicc.cpp:264 msgid "" "You must select the profile for your input device (usually, your camera, " "scanner...)
" msgstr "" #: utilities/setup/setupicc.cpp:267 msgid "" "You can use this button to get more detailed information about the selected " "input profile.
" msgstr "" #: utilities/setup/setupicc.cpp:277 msgid "Soft proof:" msgstr "" #: utilities/setup/setupicc.cpp:280 msgid "" "You must select the profile for your output device (usually, your printer). " "This profile will be used to do a soft proof, so you will be able to preview " "how an image will be rendered via an output device.
" msgstr "" #: utilities/setup/setupicc.cpp:284 msgid "" "You can use this button to get more detailed information about the selected " "soft proof profile.
" msgstr "" #: utilities/setup/setupicc.cpp:299 msgid "Use black point compensation" msgstr "" #: utilities/setup/setupicc.cpp:300 msgid "" "Black Point Compensation is a way to make adjustments between the " "maximum black levels of digital files and the black capabilities of various " "digital devices.
" msgstr "" #: utilities/setup/setupicc.cpp:307 msgid "Rendering Intents:" msgstr "" #: utilities/setup/setupicc.cpp:314 msgid "" "Perceptual intent causes the full gamut of the image to be compressed " "or expanded to fill the gamut of the destination device, so that gray balance " "is preserved but colorimetric accuracy may not be preserved.
" "In other words, if certain colors in an image fall outside of the range of " "colors that the output device can render, the image intent will cause all the " "colors in the image to be adjusted so that the every color in the image falls " "within the range that can be rendered and so that the relationship between " "colors is preserved as much as possible.
" "This intent is most suitable for display of photographs and images, and is " "the default intent.
Absolute Colorimetric intent causes any colors that fall outside the " "range that the output device can render are adjusted to the closest color that " "can be rendered, while all other colors are left unchanged.
" "This intent preserves the white point and is most suitable for spot colors " "(Pantone, TruMatch, logo colors, ...).
Relative Colorimetric intent is defined such that any colors that " "fall outside the range that the output device can render are adjusted to the " "closest color that can be rendered, while all other colors are left unchanged. " "Proof intent does not preserve the white point.
Saturation intent preserves the saturation of colors in the image at " "the possible expense of hue and lightness.
" "Implementation of this intent remains somewhat problematic, and the ICC is " "still working on methods to achieve the desired effects.
" "This intent is most suitable for business graphics such as charts, where it " "is more important that the colors be vivid and contrast well with each other " "rather than a specific color.
You must set a correct default path for your ICC color profiles files.
" msgstr "" #: utilities/setup/setupicc.cpp:484 msgid "Sorry, there are no ICC profiles files in " msgstr "" #: utilities/setup/setupicc.cpp:486 msgid "
" msgstr "" #: utilities/setup/setupicc.cpp:551 msgid "The following profile is invalid:
" msgstr "" #: utilities/setup/setupicc.cpp:555 msgid "Invalid Profile" msgstr "" #: utilities/setup/setupicc.cpp:559 msgid "Invalid color profile has been removed" msgstr "" #: utilities/setup/setupicc.cpp:563 msgid "" "
digiKam has failed to remove the invalid color profile
" "You have to do it manually
" msgstr "" #: utilities/setup/setupicc.cpp:691 msgid "Sorry, there is not any selected profile" msgstr "" #: utilities/setup/setuptooltip.cpp:109 msgid "Show album items toolti&ps" msgstr "" #: utilities/setup/setuptooltip.cpp:110 msgid "" "Set this option to display image information when the mouse hovers over an " "album item." msgstr "" #: utilities/setup/setuptooltip.cpp:147 msgid "Show camera aperture and focal" msgstr "" #: utilities/setup/setuptooltip.cpp:171 msgid "digiKam Information" msgstr "" #: utilities/setup/setuptooltip.cpp:173 msgid "Show album name" msgstr "" #: utilities/setup/setuptooltip.cpp:174 msgid "
Set this option to display the album name." msgstr "" #: utilities/setup/setuptooltip.cpp:176 msgid "Show image caption" msgstr "" #: utilities/setup/setuptooltip.cpp:177 msgid "
Set this option to display the image captions." msgstr "" #: utilities/setup/setuptooltip.cpp:179 msgid "Show image tags" msgstr "" #: utilities/setup/setuptooltip.cpp:180 msgid "
Set this option to display the image tags." msgstr "" #: utilities/setup/setuptooltip.cpp:182 msgid "Show image rating" msgstr "" #: utilities/setup/setuptooltip.cpp:183 msgid "
Set this option to display the image rating." msgstr "" #: utilities/setup/cameraselection.cpp:100 msgid "Camera Configuration" msgstr "" #: utilities/setup/cameraselection.cpp:108 msgid "Mounted Camera" msgstr "" #: utilities/setup/cameraselection.cpp:118 msgid "Camera List" msgstr "" #: utilities/setup/cameraselection.cpp:122 msgid "" "
Select the camera name that you want to use. All default settings on the " "right panel will be set automatically.
" "This list has been generated using the gphoto2 library installed on your " "computer.
" msgstr "" #: utilities/setup/cameraselection.cpp:131 msgid "Camera Title" msgstr "" #: utilities/setup/cameraselection.cpp:133 msgid "" "Set here the name used in digiKam interface to identify this camera.
" msgstr "" #: utilities/setup/cameraselection.cpp:138 msgid "Camera Port Type" msgstr "" #: utilities/setup/cameraselection.cpp:142 msgid "USB" msgstr "" #: utilities/setup/cameraselection.cpp:143 msgid "" "Select this option if your camera is connected to your computer using an USB " "cable.
" msgstr "" #: utilities/setup/cameraselection.cpp:147 msgid "Serial" msgstr "" #: utilities/setup/cameraselection.cpp:148 msgid "" "Select this option if your camera is connected to your computer using a " "serial cable.
" msgstr "" #: utilities/setup/cameraselection.cpp:153 msgid "Camera Port Path" msgstr "" #: utilities/setup/cameraselection.cpp:155 msgid "Note: only for serial port camera" msgstr "" #: utilities/setup/cameraselection.cpp:159 msgid "" "Select the serial port to use on your computer. This option is only required " "if you use a serial camera.
" msgstr "" #: utilities/setup/cameraselection.cpp:164 msgid "Camera Mount Path" msgstr "" #: utilities/setup/cameraselection.cpp:167 msgid "Note: only for USB/IEEE mass storage camera" msgstr "" #: utilities/setup/cameraselection.cpp:171 msgid "" "Set here the mount path to use on your computer. This option is only " "required if you use a USB Mass Storage camera.
" msgstr "" #: utilities/setup/cameraselection.cpp:188 msgid "" "To set a USB Mass Storage camera"
"
(which looks like a removable drive when mounted on your desktop), please"
"
use %1 from camera list.
To set a Generic PTP USB Device"
"
(which uses the Picture Transfer Protocol), please"
"
use %1 from the camera list.
A complete list of camera settings to use is"
"
available at "
"this url.
Color Management is disabled.
" "You can enable it now by clicking on the \"Settings\" button.
" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:147 msgid "Resize Image" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:151 msgid "&Save As..." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:152 msgid "&Load..." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:158 msgid "Reset all filter parameters to their default values." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:159 msgid "
Load all filter parameters from settings text file." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:160 msgid "
Save all filter parameters to settings text file." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:178 msgid "New Size" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:185 msgid "
Set here the new image width in pixels." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:192 msgid "
Set here the new image height in pixels." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:199 msgid "
Set here the new image width in percent." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:201 msgid "Height (%):" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:206 msgid "
Set here the new image height in percent." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:208 msgid "Maintain aspect ratio" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:209 msgid "
Enable this option to maintain aspect ratio with new image sizes." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:221 msgid "Restore photograph" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:222 msgid "" "
Enable this option to restore photograph content. This way is usefull to " "scale-up an image to an huge size. Warning: this process can take a while." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:226 msgid "" "Note: use Restoration Mode to only scale-up an image to huge size. Warning, " "this process can take a while." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:231 msgid "
This shows the current progress when you use Restoration mode." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:551 #: utilities/imageeditor/tools/imageresize.cpp:583 msgid "Resize" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:608 msgid "Photograph Resizing Settings File to Load" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:619 msgid "\"%1\" is not a Photograph Resizing settings text file." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:626 msgid "Cannot load settings from the Photograph Resizing text file." msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:635 msgid "Photograph Resizing Settings File to Save" msgstr "" #: utilities/imageeditor/tools/imageresize.cpp:644 msgid "Cannot save settings to the Photograph Resizing text file." msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:62 msgid "Convert" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:63 msgid "Apply the default color workspace profile to the image" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:64 msgid "Do Nothing" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:65 msgid "Do not change the image" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:66 msgid "Assign" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:67 msgid "" "Only embed the color workspace profile in the image, don't change the image" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:75 msgid "Original Image:" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:77 msgid "Corrected Image:" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:81 msgid "Current workspace color profile:" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:84 msgid "Embedded color profile:" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:91 msgid "" "
This image has not been assigned a color profile.
" "Do you want to convert it to your workspace color profile?
" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:101 msgid "" "This image has been assigned to a color profile that does not match your " "default workspace color profile.
" "Do you want to convert it to your workspace color profile?
" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:37 msgid "unknown" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:56 msgid "Rotate 90 Degrees" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:59 msgid "Rotate 180 Degrees" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:62 msgid "Rotate 270 Degrees" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:112 msgid "Flip Horizontal" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:114 msgid "Flip Vertical" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:149 msgid "Brightness,Contrast,Gamma" msgstr "" #: utilities/imageeditor/canvas/dimginterface.cpp:422 msgid "" "Cannot find the ICC color-space profile file. The ICC profiles path seems to be " "invalid. No color transform will be applied. Please check the \"Color " "Management\" configuration in digiKam's setup to verify the ICC path." msgstr "" #: utilities/imageeditor/canvas/imagepluginloader.cpp:117 msgid "Loading Image Plugins" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:267 #: utilities/lighttable/lighttablewindow.cpp:339 msgid "&First" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:272 #: utilities/lighttable/lighttablewindow.cpp:345 msgid "&Last" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:290 msgid "Print Image..." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:370 msgid "Fit to &Selection" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:374 msgid "" "This option can be used to zoom the image to the current selection area." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:408 #: utilities/lighttable/lighttablewindow.cpp:424 msgid "Toggle the window to full screen mode" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:414 msgid "Under-Exposure Indicator" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:419 msgid "Over-Exposure Indicator" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:424 msgid "Color Managed View" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:431 msgid "&Resize..." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:435 msgid "Crop" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:441 msgid "" "This option can be used to crop the image. Select a region of the image to " "enable this action." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:446 msgid "Flip Horizontally" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:451 msgid "Flip Vertically" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:458 msgid "Rotate Left" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:464 msgid "Rotate Right" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:517 #: utilities/lighttable/lighttablewindow.cpp:509 msgid "Exit Fullscreen mode" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:518 msgid "Exit out of the fullscreen mode" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:523 #: utilities/imageeditor/editor/editorwindow.cpp:538 #: utilities/lighttable/lighttablewindow.cpp:515 #: utilities/lighttable/lighttablewindow.cpp:530 msgid "Load Next Image" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:528 #: utilities/imageeditor/editor/editorwindow.cpp:533 #: utilities/imageeditor/editor/editorwindow.cpp:543 #: utilities/lighttable/lighttablewindow.cpp:520 #: utilities/lighttable/lighttablewindow.cpp:525 #: utilities/lighttable/lighttablewindow.cpp:535 msgid "Load Previous Image" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:548 msgid "Zoom in on Image" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:553 msgid "Zoom out of Image" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:558 msgid "Redo Last action" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:570 #: utilities/imageeditor/editor/editorwindow.cpp:1292 msgid "No selection" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:574 msgid "Information about current selection area" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:580 msgid "Information about image size" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:630 #, c-format msgid "Print %1" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:635 msgid "Failed to print file: '%1'" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1173 msgid "" "About to overwrite file \"%1\"\n" "Are you sure?" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1178 #: utilities/imageeditor/editor/editorwindow.cpp:1660 #: utilities/imageeditor/editor/editorwindow.cpp:1706 msgid "Overwrite" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1194 msgid "" "The image '%1' has been modified.\n" "Do you want to save it?" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1251 msgid "Please wait while the image is being saved..." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1357 msgid "Failed to load image \"%1\"" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1392 msgid "Saving: " msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1406 #: utilities/imageeditor/editor/editorwindow.cpp:1447 msgid "" "Failed to save file\n" "\"%1\"\n" "to\n" "\"%2\"." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1560 msgid "New Image File Name" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1615 msgid "Target image file format \"%1\" unsupported." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1625 msgid "" "Failed to save file\n" "\"%1\" to\n" "\"%2\"." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1655 msgid "" "A file named \"%1\" already exists. Are you sure you want to overwrite it?" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1659 #: utilities/imageeditor/editor/editorwindow.cpp:1705 msgid "Overwrite File?" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1700 msgid "" "You do not have write permissions for the file named \"%1\". Are you sure you " "want to overwrite it?" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1742 msgid "Failed to overwrite original file" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1743 msgid "Error Saving File" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1789 msgid "Color Managed View is enabled" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1791 msgid "Color Managed View is disabled" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1795 msgid "" "Color Management is not configured, so the Color Managed View is not available" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1818 msgid "Under-Exposure indicator is enabled" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1819 msgid "Under-Exposure indicator is disabled" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1840 msgid "Over-Exposure indicator is enabled" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:1841 msgid "Over-Exposure indicator is disabled" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:336 msgid "Delete File Permanently" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:346 msgid "Delete Permanently without Confirmation" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:354 msgid "Move to Trash without Confirmation" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:447 #, c-format msgid "Image Editor - %1" msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:1032 msgid "" "There is no image to show in the current album.\n" "The image editor will be closed." msgstr "" #: utilities/imageeditor/editor/imagewindow.cpp:1034 msgid "No Image in Current Album" msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:125 msgid "" "Here you can see the original image panel which can help you to select the " "clip preview." "
Click and drag the mouse cursor in the red rectangle to change the clip " "focus." msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:143 msgid "Guide:" msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:164 msgid "
Reset all settings to their default values." msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:191 msgid "Load..." msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:192 msgid "
Load all parameters from settings text file." msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:198 msgid "
Save all parameters to settings text file." msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:206 msgid "Try" msgstr "" #: utilities/imageeditor/editor/editortoolsettings.cpp:207 msgid "
Try all settings." msgstr "" #: utilities/imageeditor/rawimport/rawimport.cpp:78 msgid "Raw Import" msgstr "" #: utilities/imageeditor/rawimport/rawimport.cpp:80 #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:379 msgid "Post Processing" msgstr "" #: utilities/imageeditor/rawimport/rawimport.cpp:172 #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:378 msgid "Raw Decoding" msgstr "" #: utilities/imageeditor/rawimport/rawpreview.cpp:188 msgid "" "Cannot decode RAW image for\n" "\"%1\"" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:181 msgid "" "
Select the histogram channel to display here:" "
Luminosity: display the image's luminosity values." "
Red: display the red image-channel values." "
Green: display the green image-channel values." "
Blue: display the blue image-channel values." "
Colors: Display all color channel values at the same time." msgstr "" #: utilities/cameragui/cameraui.cpp:869 #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:251 msgid "Abort" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:254 msgid "Abort the current Raw image preview." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:257 msgid "Update" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:260 msgid "Generate a Raw image preview using current settings." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:297 msgid "Set here the gamma adjustement of the image" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:304 msgid "
Set here the color saturation correction." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:306 msgid "Exposure (E.V):" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:311 msgid "" "
This value in E.V will be used to perform an exposure compensation of the " "image." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:347 msgid "Reset curve to linear" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:367 msgid "Exposure" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:368 msgid "Luminosity Curve" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:380 msgid "Info" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:386 msgid "
Reset all settings to default values." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:390 msgid "
Import image to editor using current settings." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:392 msgid "Use Default" msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:394 msgid "
Use general Raw decoding settings to load this image in editor."
msgstr ""
#: utilities/lighttable/lighttablebar.cpp:174
msgid "Show on left panel"
msgstr ""
#: utilities/lighttable/lighttablebar.cpp:175
msgid "Show on right panel"
msgstr ""
#: utilities/lighttable/lighttablebar.cpp:185
msgid "Remove item"
msgstr ""
#: utilities/lighttable/lighttablebar.cpp:189
msgid "Clear all"
msgstr ""
#: utilities/lighttable/lighttablebar.cpp:619
msgid "Drag and drop images here"
msgstr ""
#: utilities/lighttable/lighttablepreview.cpp:145
msgid "Pan the image"
msgstr ""
#: utilities/lighttable/lighttablepreview.cpp:195
msgid "Drag and drop an image here"
msgstr ""
#: utilities/lighttable/lighttablepreview.cpp:281
msgid ""
"Unable to display preview for\n"
"\"%1\""
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:351
msgid "On Left"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:355
msgid "Show item on left panel"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:357
msgid "On Right"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:361
msgid "Show item on right panel"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:368
msgid "Remove item from LightTable"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:373
msgid "Remove all items from LightTable"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:388
msgid "Synchronize"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:393
msgid "Synchronize preview from left and right panels"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:395
msgid "By Pair"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:400
msgid "Navigate by pair with all items"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:510
msgid "Exit fullscreen viewing mode"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:540
msgid "Zoom in on image"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:545
msgid "Zoom out from image"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:625
msgid "No item on Light Table"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:629
msgid "1 item on Light Table"
msgstr ""
#: utilities/lighttable/lighttablewindow.cpp:633
msgid "%1 items on Light Table"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:45
#: utilities/cameragui/cameraui.cpp:454
msgid "Camera Information"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:52
msgid "Summary"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:52
msgid "Camera Summary"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:62
msgid "Manual"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:62
msgid "Camera Manual"
msgstr ""
#: utilities/cameragui/camerainfodialog.cpp:72
msgid "About Driver"
msgstr ""
#: utilities/cameragui/umscamera.cpp:487
msgid ""
"Mounted Camera driver for USB/IEEE1394 mass storage cameras and Flash "
"disk card readers."
"
"
"
"
msgstr ""
#: utilities/cameragui/umscamera.cpp:490
msgid "Title: %1
Model: %2
Port: %3
Path: %4
"
msgstr ""
#: utilities/cameragui/umscamera.cpp:503
msgid ""
"For more information about the Mounted Camera driver, please read "
"Supported Digital Still Cameras section in the digiKam manual."
msgstr ""
#: utilities/cameragui/umscamera.cpp:511
msgid ""
"The Mounted Camera driver is a simple interface to a camera disk mounted "
"locally on your system."
"
"
"
It doesn't use libgphoto2 drivers."
"
"
"
To report any problems with this driver, please contact the digiKam team "
"at:"
"
"
"
http://www.digikam.org/?q=contact"
msgstr ""
#: utilities/cameragui/camerafolderview.cpp:62
msgid "Camera Folders"
msgstr ""
#: utilities/cameragui/freespacewidget.cpp:184
msgid "Album Library"
msgstr ""
#: utilities/cameragui/freespacewidget.cpp:196
#: utilities/cameragui/freespacewidget.cpp:207
msgid "Capacity:"
msgstr ""
#: utilities/cameragui/freespacewidget.cpp:199
#: utilities/cameragui/freespacewidget.cpp:210
msgid "Available:"
msgstr ""
#: utilities/cameragui/freespacewidget.cpp:202
msgid "Require:"
msgstr ""
#: utilities/cameragui/camerafolderdialog.cpp:52
msgid "%1 - Select Camera Folder"
msgstr ""
#: utilities/cameragui/camerafolderdialog.cpp:69
msgid ""
"
Please select the camera folder where you want to upload the images.
" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:143 msgid "Camera filenames" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:144 msgid "" "Turn on this option to use camera provided image filenames without " "modifications." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:153 msgid "Change case to:" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:157 msgid "Leave as Is" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:158 msgid "Upper" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:159 msgid "Lower" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:161 msgid "
Set the method to use to change the case of image filenames." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:173 msgid "Customize" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:175 msgid "
Turn on this option to customize image filenames during download." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:187 msgid "Prefix:" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:192 msgid "
Set the prefix which will be added to image filenames." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:195 msgid "Suffix:" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:199 msgid "
Set the suffix which will be added to image filenames." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:202 msgid "Add Date && Time" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:204 msgid "
Set this option to add the camera provided date and time." msgstr "" #: utilities/cameragui/cameraui.cpp:279 #: utilities/cameragui/renamecustomizer.cpp:207 msgid "Date format:" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:209 msgid "Standard" msgstr "" #: utilities/cameragui/cameraui.cpp:281 #: utilities/cameragui/renamecustomizer.cpp:210 msgid "ISO" msgstr "" #: utilities/cameragui/cameraui.cpp:282 #: utilities/cameragui/renamecustomizer.cpp:211 msgid "Full Text" msgstr "" #: utilities/cameragui/cameraui.cpp:283 #: utilities/cameragui/renamecustomizer.cpp:212 msgid "Local Settings" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:213 msgid "Advanced..." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:214 msgid "" "
Select your preferred date format for creating new albums. The options " "available are:
" "Standard: the date format that has been used as a standard by " "digiKam. E.g.: 20060824T142618
ISO" ": the date format according to ISO 8601 (YYYY-MM-DD). E.g.: " "2006-08-24T14:26:18" "Full Text: the date format is a user-readable string. E.g.: " "Thu Aug 24 14:26:18 2006
" "Local Settings: the date format depending on TDE control panel " "settings.
" "Advanced: allows the user to specify a custom date format.
" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:234 msgid "Add Camera Name" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:236 msgid "Set this option to add the camera name." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:238 msgid "Add Sequence Number" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:240 msgid "" "
Set this option to add a sequence number starting with the index set below." msgstr "" #: utilities/cameragui/renamecustomizer.cpp:243 msgid "Start Index:" msgstr "" #: utilities/cameragui/renamecustomizer.cpp:246 msgid "" "
Set the starting index value used to rename files with a sequence number."
msgstr ""
#: utilities/cameragui/renamecustomizer.cpp:436
msgid ""
" Enter the format for date and time. Use dd for the day, MM for the month, yyyy "
"for the year, hh for the hour, mm for the minute, ss "
"for the second. Examples: yyyyMMddThhmmss for 20060824T142418,"
"
yyyy-MM-dd hh:mm:ss for 2006-08-24 14:24:18.
Set how digiKam will rename files as they are downloaded." msgstr "" #: utilities/cameragui/cameraui.cpp:270 msgid "File Renaming Options" msgstr "" #: utilities/cameragui/cameraui.cpp:276 msgid "Extension-based sub-albums" msgstr "" #: utilities/cameragui/cameraui.cpp:277 msgid "Date-based sub-albums" msgstr "" #: utilities/cameragui/cameraui.cpp:289 msgid "
Set how digiKam creates albums automatically when downloading." msgstr "" #: utilities/cameragui/cameraui.cpp:290 msgid "" "
Enable this option if you want to download your pictures into automatically " "created file extension-based sub-albums of the destination album. This way, you " "can separate JPEG and RAW files as they are downloaded from your camera." msgstr "" #: utilities/cameragui/cameraui.cpp:293 msgid "" "
Enable this option if you want to download your pictures into automatically " "created file date-based sub-albums of the destination album." msgstr "" #: utilities/cameragui/cameraui.cpp:296 msgid "" "
Select your preferred date format used to create new albums. The options " "available are:" "
ISO: the date format is in accordance with ISO 8601 (YYYY-MM-DD). " "E.g.: 2006-08-24" "
Full Text: the date format is in a user-readable string. E.g.: " "Thu Aug 24 2006" "
Local Settings: the date format depending on TDE control panel " "settings." "
" msgstr "" #: utilities/cameragui/cameraui.cpp:305 msgid "Auto-creation of Albums" msgstr "" #: utilities/cameragui/cameraui.cpp:311 msgid "Set default photographer identity" msgstr "" #: utilities/cameragui/cameraui.cpp:312 msgid "Set default credit and copyright" msgstr "" #: utilities/cameragui/cameraui.cpp:313 msgid "Fix internal date && time" msgstr "" #: utilities/cameragui/cameraui.cpp:315 msgid "Auto-rotate/flip image" msgstr "" #: utilities/cameragui/cameraui.cpp:316 msgid "Convert to lossless file format" msgstr "" #: utilities/cameragui/cameraui.cpp:318 msgid "New image format:" msgstr "" #: utilities/cameragui/cameraui.cpp:330 msgid "" "
Set here all options to fix/transform JPEG files automatically as they are " "downloaded." msgstr "" #: utilities/cameragui/cameraui.cpp:332 msgid "" "
Enable this option if you want images automatically rotated or flipped using " "EXIF information provided by the camera." msgstr "" #: utilities/cameragui/cameraui.cpp:334 msgid "" "
Enable this option to store the default photographer identity in the IPTC " "tags using digiKam's metadata settings." msgstr "" #: utilities/cameragui/cameraui.cpp:336 msgid "" "
Enable this option to store the default credit and copyright information in " "the IPTC tags using digiKam's metadata settings." msgstr "" #: utilities/cameragui/cameraui.cpp:338 msgid "" "
Enable this option to set date and time metadata tags to the right values if " "your camera does not set these tags correctly when pictures are taken. The " "values will be saved in the DateTimeDigitized and DateTimeCreated EXIF/IPTC " "fields." msgstr "" #: utilities/cameragui/cameraui.cpp:342 msgid "" "
Enable this option to automatically convert all JPEG files to a lossless " "image format. Note: Image conversion can take a while on a slow " "computer." msgstr "" #: utilities/cameragui/cameraui.cpp:345 msgid "" "
Select your preferred lossless image file format to convert to. Note: "
"All metadata will be preserved during the conversion."
msgstr ""
#: utilities/cameragui/cameraui.cpp:349
msgid "On the Fly Operations (JPEG only)"
msgstr ""
#: utilities/cameragui/cameraui.cpp:351
msgid "Settings"
msgstr ""
#: utilities/cameragui/cameraui.cpp:411
msgid "Select &All"
msgstr ""
#: utilities/cameragui/cameraui.cpp:412
msgid "Select N&one"
msgstr ""
#: utilities/cameragui/cameraui.cpp:413
msgid "&Invert Selection"
msgstr ""
#: utilities/cameragui/cameraui.cpp:415
msgid "Select &New Items"
msgstr ""
#: utilities/cameragui/cameraui.cpp:417
msgid "Increase Thumbnail Size"
msgstr ""
#: utilities/cameragui/cameraui.cpp:418
msgid "Decrease Thumbnail Size"
msgstr ""
#: utilities/cameragui/cameraui.cpp:420
msgid "Toggle Lock"
msgstr ""
#: utilities/cameragui/cameraui.cpp:426
msgid "Download Selected"
msgstr ""
#: utilities/cameragui/cameraui.cpp:428
msgid "Download All"
msgstr ""
#: utilities/cameragui/cameraui.cpp:431
msgid "Download/Delete Selected"
msgstr ""
#: utilities/cameragui/cameraui.cpp:433
msgid "Download/Delete All"
msgstr ""
#: utilities/cameragui/cameraui.cpp:436
msgid "Upload..."
msgstr ""
#: utilities/cameragui/cameraui.cpp:445
msgid "Delete Selected"
msgstr ""
#: utilities/cameragui/cameraui.cpp:680
msgid "Cancelling current operation, please wait..."
msgstr ""
#: utilities/cameragui/cameraui.cpp:708
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr ""
#: utilities/cameragui/cameraui.cpp:714
msgid "Disconnecting from camera, please wait..."
msgstr ""
#: utilities/cameragui/cameraui.cpp:750
msgid "Scanning for new files, please wait..."
msgstr ""
#: utilities/cameragui/cameraui.cpp:791
msgid "Ready"
msgstr ""
#: utilities/cameragui/cameraui.cpp:863
msgid ""
"Failed to connect to the camera. Please make sure it is connected properly and "
"turned on. Would you like to try again?"
msgstr ""
#: utilities/cameragui/cameraui.cpp:867
msgid "Connection Failed"
msgstr ""
#: utilities/cameragui/cameraui.cpp:868
msgid "Retry"
msgstr ""
#: utilities/cameragui/cameraui.cpp:1028
msgid "Select Image to Upload"
msgstr ""
#: utilities/cameragui/cameraui.cpp:1063
msgid ""
"Camera Folder %1 already contains item %2"
"
Please enter a new file name (without extension):"
msgstr ""
#: utilities/cameragui/cameraui.cpp:1067 utilities/cameragui/cameraui.cpp:1070
msgid "File already exists"
msgstr ""
#: utilities/cameragui/cameraui.cpp:1124
msgid ""
"There is no enough free space on Album Library Path to download and process "
"selected pictures from camera.\n"
"\n"
"Estimated space require: %1\n"
"Available free space: %2"
msgstr ""
#: utilities/cameragui/cameraui.cpp:1166
msgid ""
"
Please select the destination album from the digiKam library to import the " "camera pictures into.
" msgstr "" #: utilities/cameragui/cameraui.cpp:1454 msgid "" "The items listed below are locked by camera (read-only). These items will not " "be deleted. If you really want to delete these items, please unlock them and " "try again." msgstr "" #: utilities/cameragui/cameraui.cpp:1466 #, c-format msgid "" "_n: About to delete this image. Deleted files are unrecoverable. Are you sure?\n" "About to delete these %n images. Deleted files are unrecoverable. Are you sure?" msgstr "" #: utilities/cameragui/cameraui.cpp:1623 msgid "A file with same name (%1) exists in folder %2" msgstr "" #: utilities/cameragui/cameraui.cpp:1636 msgid "Failed to find Album for path '%1'" msgstr "" #: utilities/cameragui/gpcamera.cpp:956 msgid "" "Title: %1\n" "Model: %2\n" "Port: %3\n" "Path: %4\n" "\n" "Thumbnails: %5\n" "Delete items: %6\n" "Upload items: %7\n" "Create directories: %8\n" "Delete directories: %9\n" "\n" msgstr "" #: utilities/cameragui/gpcamera.cpp:969 utilities/cameragui/gpcamera.cpp:970 #: utilities/cameragui/gpcamera.cpp:971 utilities/cameragui/gpcamera.cpp:972 #: utilities/cameragui/gpcamera.cpp:973 msgid "yes" msgstr "" #: utilities/cameragui/gpcamera.cpp:969 utilities/cameragui/gpcamera.cpp:970 #: utilities/cameragui/gpcamera.cpp:971 utilities/cameragui/gpcamera.cpp:972 #: utilities/cameragui/gpcamera.cpp:973 msgid "no" msgstr "" #: utilities/cameragui/gpcamera.cpp:1036 msgid "" "\n" "\n" "To report problems about this driver, please contact the gphoto2 team at:\n" "\n" "http://gphoto.org/bugs" msgstr "" #: utilities/cameragui/cameraiconview.cpp:588 msgid "Download" msgstr "" #: utilities/cameragui/cameraiconview.cpp:589 msgid "Download && Delete" msgstr "" #: utilities/cameragui/cameraiconview.cpp:590 msgid "Toggle lock" msgstr "" #: utilities/cameragui/cameraiconview.cpp:755 msgid "&Upload to camera" msgstr "" #: utilities/slideshow/slideshow.cpp:433 msgid "" "Cannot display image\n" "\"%1\"" msgstr "" #: utilities/slideshow/slideshow.cpp:451 msgid "SlideShow Completed." msgstr "" #: utilities/slideshow/slideshow.cpp:452 msgid "Click To Exit..." msgstr ""