rename the following methods:

tqfind find
tqreplace replace
tqcontains contains

1 files changed, 23 insertions, 23 deletions

diff --git a/tqtinterface/qt4/src/3rdparty/libmng/configure b/tqtinterface/qt4/src/3rdparty/libmng/configure
index 650701a..9a796af 100755
--- a/tqtinterface/qt4/src/3rdparty/libmng/configure
+++ b/tqtinterface/qt4/src/3rdparty/libmng/configure
@@ -72,7 +72,7 @@ if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
-# tqfind a string as large as possible, as long as the shell can cope with it
+# find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
     if (echo_test_string="`eval $cmd`") 2>/dev/null &&
@@ -108,7 +108,7 @@ else
   IFS="$save_ifs"
 
   if test "X$echo" = Xecho; then
-    # We didn't tqfind a better echo, so look for alternatives.
+    # We didn't find a better echo, so look for alternatives.
     if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
        echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
        test "X$echo_testing_string" = "X$echo_test_string"; then
@@ -353,7 +353,7 @@ Directory and file names:
   --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
   --infodir=DIR           info documentation in DIR [PREFIX/info]
   --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            tqfind the sources in DIR [configure dir or ..]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
   --program-prefix=PREFIX prepend PREFIX to installed program names
   --program-suffix=SUFFIX append SUFFIX to installed program names
   --program-transform-name=PROGRAM
@@ -605,7 +605,7 @@ fi
 exec 5>./config.log
 
 echo "\
-This file tqcontains any messages produced by compilers while
+This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 " 1>&5
 
@@ -637,11 +637,11 @@ if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
 rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it tqcontains at least a newline.
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
 echo > confdefs.h
 
 # A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to tqfind out if srcdir is correct.
+# configure is in, which we can look for to find out if srcdir is correct.
 ac_unique_file=libmng.h
 
 # Find the source files, if location was not specified.
@@ -660,9 +660,9 @@ else
 fi
 if test ! -r $srcdir/$ac_unique_file; then
   if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not tqfind sources in $ac_confdir or .." 1>&2; exit 1; }
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
   else
-    { echo "configure: error: can not tqfind sources in $srcdir" 1>&2; exit 1; }
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
   fi
 fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
@@ -726,7 +726,7 @@ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not tqfind install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
 ac_config_guess=$ac_aux_dir/config.guess
 ac_config_sub=$ac_aux_dir/config.sub
@@ -1879,7 +1879,7 @@ else
 	break
       else
 	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to tqfind one that supports BSD flags
+	continue # so that we can try to find one that supports BSD flags
       fi
     fi
   done
@@ -2303,10 +2303,10 @@ EOF
 	  LIBS="$save_LIBS"
 	  CFLAGS="$save_CFLAGS"
 	else
-	  echo "cannot tqfind nm_test_func in $nlist" >&5
+	  echo "cannot find nm_test_func in $nlist" >&5
 	fi
       else
-	echo "cannot tqfind nm_test_var in $nlist" >&5
+	echo "cannot find nm_test_var in $nlist" >&5
       fi
     else
       echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
@@ -3308,7 +3308,7 @@ include_expsyms=
 # exclude_expsyms can be an egrep regular expression of symbols to exclude
 # it will be wrapped by ` (' and `)$', so one must not match beginning or
 # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that tqcontains `d'.
+# as well as any symbol that contains `d'.
 exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
 # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
 # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -3585,7 +3585,7 @@ else
 	else
 	  # We have old collect2
 	  hardcode_direct=unsupported
-	  # It fails to tqfind uninstalled libraries when the uninstalled
+	  # It fails to find uninstalled libraries when the uninstalled
 	  # path is not listed in the libpath.  Setting hardcode_minus_L
 	  # to unsupported forces relinking
 	  hardcode_minus_L=yes
@@ -3839,7 +3839,7 @@ else
 *** create self contained shared libraries on Solaris systems, without
 *** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
 *** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may tqfind that when you link such libraries
+*** libraries.  However, you may find that when you link such libraries
 *** into an application without using GCC, you have to manually add
 *** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
 *** upgrade to a newer version of GCC.  Another option is to rebuild your
@@ -4092,7 +4092,7 @@ bsdi4*)
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
   export_dynamic_flag_spec=-rdynamic
-  # the default ld.so.conf also tqcontains /usr/contrib/lib and
+  # the default ld.so.conf also contains /usr/contrib/lib and
   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
   # libtool to hard-code these into programs
   ;;
@@ -4779,7 +4779,7 @@ else
 #endif
 
 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   tqfind out it does not work in some platform. */
+   find out it does not work in some platform. */
 #ifndef LT_DLLAZY_OR_NOW
 #  ifdef RTLD_LAZY
 #    define LT_DLLAZY_OR_NOW		RTLD_LAZY
@@ -4873,7 +4873,7 @@ else
 #endif
 
 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   tqfind out it does not work in some platform. */
+   find out it does not work in some platform. */
 #ifndef LT_DLLAZY_OR_NOW
 #  ifdef RTLD_LAZY
 #    define LT_DLLAZY_OR_NOW		RTLD_LAZY
@@ -5081,7 +5081,7 @@ if test -f "$ltmain"; then
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 #
 # As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that tqcontains a
+# distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
@@ -5152,7 +5152,7 @@ OBJDUMP="$OBJDUMP"
 # Used on cygwin: assembler.
 AS="$AS"
 
-# The name of the directory that tqcontains temporary libtool files.
+# The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
 # How to create reloadable object files.
@@ -5221,7 +5221,7 @@ version_type=$version_type
 libname_spec=$lt_libname_spec
 
 # List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker tqfinds with -lNAME.
+# The last name is the one that the linker finds with -lNAME.
 library_names_spec=$lt_library_names_spec
 
 # The coded name of the library, if different from the real name.
@@ -5541,7 +5541,7 @@ EOF
   esac
 
   # We use sed instead of cat because bash on DJGPP gets confused if
-  # if tqfinds mixed CR/LF and LF-only lines.  Since sed operates in
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
   sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
@@ -6615,7 +6615,7 @@ cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
 # scripts and configure runs.  It is not useful on other systems.
-# If it tqcontains results you don't want to keep, you may remove or edit it.
+# If it contains results you don't want to keep, you may remove or edit it.
 #
 # By default, configure uses ./config.cache as the cache file,
 # creating it if it does not exist already.  You can give configure