diff options
Diffstat (limited to 'tqtinterface/qt4/src/3rdparty/libjpeg/jdmaster.c')
| -rw-r--r-- | tqtinterface/qt4/src/3rdparty/libjpeg/jdmaster.c | 557 |
1 files changed, 557 insertions, 0 deletions
diff --git a/tqtinterface/qt4/src/3rdparty/libjpeg/jdmaster.c b/tqtinterface/qt4/src/3rdparty/libjpeg/jdmaster.c new file mode 100644 index 0000000..1b9cfb0 --- /dev/null +++ b/tqtinterface/qt4/src/3rdparty/libjpeg/jdmaster.c @@ -0,0 +1,557 @@ +/* + * jdmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file tqcontains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL(boolean) +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling */ + if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL(void) +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + +#ifdef IDCT_SCALING_SUPPORTED + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * 8 <= cinfo->scale_denom) { + /* Provide 1/8 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 8L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 8L); + cinfo->min_DCT_scaled_size = 1; + } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { + /* Provide 1/4 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 4L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 4L); + cinfo->min_DCT_scaled_size = 2; + } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { + /* Provide 1/2 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 2L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 2L); + cinfo->min_DCT_scaled_size = 4; + } else { + /* Provide 1/1 scaling */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + cinfo->min_DCT_scaled_size = DCTSIZE; + } + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code assumes that the supported DCT scalings are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = cinfo->min_DCT_scaled_size; + while (ssize < DCTSIZE && + (compptr->h_samp_factor * ssize * 2 <= + cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && + (compptr->v_samp_factor * ssize * 2 <= + cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { + ssize = ssize * 2; + } + compptr->DCT_scaled_size = ssize; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + cinfo->out_color_components = RGB_PIXELSIZE; + break; +#endif /* else share code with YCbCr */ + case JCS_YCbCr: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within MAXJSAMPLE+1 of the legal range, so a table running from + * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial + * limiting step (just after the IDCT), a wildly out-of-range value is + * possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = range_limit[x & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the tqmask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * So the post-IDCT limiting table ends up looking like this: + * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, + * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0,1,...,CENTERJSAMPLE-1 + * Negative inputs select values from the upper half of the table after + * masking. + * + * We can save some space by overlapping the start of the post-IDCT table + * with the simpler range limiting table. The post-IDCT table begins at + * sample_range_limit + CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL(void) +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + cinfo->sample_range_limit = table; + /* First segment of "simple" table: limit[x] = 0 for x < 0 */ + MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* Main part of "simple" table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ + /* End of simple table, rest of first half of post-IDCT table */ + for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; + /* Second half of post-IDCT table */ + MEMZERO(table + (2 * (MAXJSAMPLE+1)), + (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), + cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL(void) +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef TQUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef TQUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef D_PROGRESSIVE_SUPPORTED + jinit_phuff_decoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapistd.c will crank the pass to completion.) + */ + +METHODDEF(void) +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef TQUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* TQUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF(void) +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL(void) +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL(void) +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = (struct jpeg_decomp_master *) master; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} |