diff options
Diffstat (limited to 'tqtinterface/qt4/src/3rdparty/libmng/configure')
| -rwxr-xr-x | tqtinterface/qt4/src/3rdparty/libmng/configure | 6901 |
1 files changed, 6901 insertions, 0 deletions
diff --git a/tqtinterface/qt4/src/3rdparty/libmng/configure b/tqtinterface/qt4/src/3rdparty/libmng/configure new file mode 100755 index 0000000..650701a --- /dev/null +++ b/tqtinterface/qt4/src/3rdparty/libmng/configure @@ -0,0 +1,6901 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --enable-shared[=PKGS] build shared libraries [default=yes]" +ac_help="$ac_help + --enable-static[=PKGS] build static libraries [default=yes]" +ac_help="$ac_help + --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" +ac_help="$ac_help + --with-gnu-ld assume the C compiler uses GNU ld [default=no]" + +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF + +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# tqfind a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't tqfind a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + +ac_help="$ac_help + --disable-libtool-lock avoid locking (might break parallel builds)" +ac_help="$ac_help + --with-pic try to use only PIC/non-PIC objects [default=use both]" +ac_help="$ac_help + --disable-largefile omit support for large files" +ac_help="$ac_help + --disable-read remove read support from library" +ac_help="$ac_help + --disable-write remove write support from library" +ac_help="$ac_help + --disable-display remove display support from library" +ac_help="$ac_help + --disable-chunks remove support for chunk access" +ac_help="$ac_help + --disable-storechunks remove support for access of previous chunks" +ac_help="$ac_help + --enable-trace include support for debug tracing callbacks" +ac_help="$ac_help + --with-zlib[=DIR] use zlib include/library files in DIR" +ac_help="$ac_help + --with-jpeg[=DIR] use jpeg include/library files in DIR" +ac_help="$ac_help + --with-lcms[=DIR] use lcms include/library files in DIR" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR tqfind the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file tqcontains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it tqcontains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to tqfind out if srcdir is correct. +ac_unique_file=libmng.h + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its tqparent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not tqfind sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not tqfind sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not tqfind install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:748: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:801: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:858: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + +PACKAGE=libmng + +VERSION=1.0.4 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <<EOF +#define PACKAGE "$PACKAGE" +EOF + +cat >> confdefs.h <<EOF +#define VERSION "$VERSION" +EOF + + + +missing_dir=`cd $ac_aux_dir && pwd` +echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +echo "configure:904: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:917: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:930: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:943: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:956: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + + + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:976: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1006: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1057: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1089: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 1100 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1131: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1136: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1164: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + + + echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 +echo "configure:1197: checking for strerror in -lcposix" >&5 +ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lcposix $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1205 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror(); + +int main() { +strerror() +; return 0; } +EOF +if { (eval echo configure:1216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -lcposix" +else + echo "$ac_t""no" 1>&6 +fi + + + + + + +echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6 +echo "configure:1242: checking for ${CC-cc} option to accept ANSI C" >&5 +if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + am_cv_prog_cc_stdc=no +ac_save_CC="$CC" +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + cat > conftest.$ac_ext <<EOF +#line 1258 "configure" +#include "confdefs.h" +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; + +int main() { + +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + +; return 0; } +EOF +if { (eval echo configure:1295: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + am_cv_prog_cc_stdc="$ac_arg"; break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +CC="$ac_save_CC" + +fi + +if test -z "$am_cv_prog_cc_stdc"; then + echo "$ac_t""none needed" 1>&6 +else + echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6 +fi +case "x$am_cv_prog_cc_stdc" in + x|xno) ;; + *) CC="$CC $am_cv_prog_cc_stdc" ;; +esac + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:1319: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext <<EOF +#line 1334 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext <<EOF +#line 1351 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext <<EOF +#line 1368 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + + + +echo $ac_n "checking for function prototypes""... $ac_c" 1>&6 +echo "configure:1401: checking for function prototypes" >&5 +if test "$am_cv_prog_cc_stdc" != no; then + echo "$ac_t""yes" 1>&6 + cat >> confdefs.h <<\EOF +#define PROTOTYPES 1 +EOF + + U= ANSI2KNR= +else + echo "$ac_t""no" 1>&6 + U=_ ANSI2KNR=./ansi2knr + # Ensure some checks needed by ansi2knr itself. + echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:1414: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1419 "configure" +#include "confdefs.h" +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1427: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1444 "configure" +#include "confdefs.h" +#include <string.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1462 "configure" +#include "confdefs.h" +#include <stdlib.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext <<EOF +#line 1483 "configure" +#include "confdefs.h" +#include <ctype.h> +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:1494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + + for ac_hdr in string.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1521: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1526 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1531: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +fi + +if test "x$U" != "x"; then + { echo "configure: error: Compiler not ANSI compliant" 1>&2; exit 1; } +fi +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi + +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1574: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1579 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1590: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1607: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1612 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} +case $enableval in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_shared=yes +fi + +# Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} +case $enableval in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_static=yes +fi + +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case $enableval in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_fast_install=yes +fi + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:1711: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:1732: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 +echo "configure:1761: checking for ld used by GCC" >&5 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 +echo "configure:1791: checking for GNU ld" >&5 +else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 +echo "configure:1794: checking for non-GNU ld" >&5 +fi +if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi +fi + +LD="$lt_cv_path_LD" +if test -n "$LD"; then + echo "$ac_t""$LD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } +echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 +echo "configure:1829: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then + lt_cv_prog_gnu_ld=yes +else + lt_cv_prog_gnu_ld=no +fi +fi + +echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + +echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +echo "configure:1846: checking for $LD option to reload object files" >&5 +if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_ld_reload_flag='-r' +fi + +echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" + +echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 +echo "configure:1858: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to tqfind one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi +fi + +NM="$lt_cv_path_NM" +echo "$ac_t""$NM" 1>&6 + +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:1896: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +echo "configure:1917: checking how to recognise dependant libraries" >&5 +if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[012]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; +esac + +fi + +echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method + +echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +echo "configure:2100: checking for object suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftest* +echo 'int i = 1;' > conftest.$ac_ext +if { (eval echo configure:2106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_objext" 1>&6 +OBJEXT=$ac_cv_objext +ac_objext=$ac_cv_objext + + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:2126: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:2136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + + + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 +echo "configure:2167: checking command to parse $NM output" >&5 +if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix*) + symcode='[BCDEGRST]' + ;; +solaris* | sysv5*) + symcode='[BDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +EOF + + if { (eval echo configure:2247: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo configure:2250: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat <<EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <<EOF >> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo configure:2301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot tqfind nm_test_func in $nlist" >&5 + fi + else + echo "cannot tqfind nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= +else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" +fi +if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +then + echo "$ac_t""failed" 1>&6 +else + echo "$ac_t""ok" 1>&6 +fi + +for ac_hdr in dlfcn.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2350: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2355 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + + + + + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +echo "configure:2395: checking for ${ac_tool_prefix}file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <<EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo $ac_n "checking for file""... $ac_c" 1>&6 +echo "configure:2457: checking for file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <<EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2528: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2560: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + RANLIB=":" +fi +fi + +# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2595: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_STRIP"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2627: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="strip" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + STRIP=":" +fi +fi + + +enable_dlopen=no +enable_win32_dll=no + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + : +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 2676 "configure"' > conftest.$ac_ext + if { (eval echo configure:2677: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +echo "configure:2698: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + + cat > conftest.$ac_ext <<EOF +#line 2711 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:2718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_needs_belf=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_cc_needs_belf=no +fi +rm -f conftest* + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +fi + +echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + + +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case $host_os in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="$2" + +echo $ac_n "checking for objdir""... $ac_c" 1>&6 +echo "configure:2838: checking for objdir" >&5 +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +echo "$ac_t""$objdir" 1>&6 + + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi + +test -z "$pic_mode" && pic_mode=default + +# We assume here that the value for lt_cv_prog_cc_pic will not be cached +# in isolation, and that seeing it set (from the cache) indicates that +# the associated values are set (in the cache) correctly too. +echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6 +echo "configure:2865: checking for $compiler option to produce PIC" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi + +fi + +if test -z "$lt_cv_prog_cc_pic"; then + echo "$ac_t""none" 1>&6 +else + echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6 + + # Check to make sure the pic_flag actually works. + echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6 +echo "configure:3017: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 + if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + cat > conftest.$ac_ext <<EOF +#line 3024 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:3031: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_prog_cc_pic_works=no + +fi +rm -f conftest* + CFLAGS="$save_CFLAGS" + +fi + + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6 +fi + +# Check for any special shared library compilation flags. +if test -n "$lt_cv_prog_cc_shlib"; then + echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2 + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : + else + echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 + lt_cv_prog_cc_can_build_shared=no + fi +fi + +echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6 +echo "configure:3083: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + cat > conftest.$ac_ext <<EOF +#line 3091 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:3098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_prog_cc_static_works=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + LDFLAGS="$save_LDFLAGS" + +fi + + +# Belt *and* braces to stop my trousers falling down: +test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6 + +pic_flag="$lt_cv_prog_cc_pic" +special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +wl="$lt_cv_prog_cc_wl" +link_static_flag="$lt_cv_prog_cc_static" +no_builtin_flag="$lt_cv_prog_cc_no_builtin" +can_build_shared="$lt_cv_prog_cc_can_build_shared" + + +# Check to see if options -o and -c are simultaneously supported by compiler +echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6 +echo "configure:3125: checking if $compiler supports -c -o file.$ac_objext" >&5 +if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +echo "int some_variable = 0;" > conftest.$ac_ext +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +compiler_c_o=no +if { (eval echo configure:3144: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&5 + lt_cv_compiler_c_o=no +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null + +fi + +compiler_c_o=$lt_cv_compiler_c_o +echo "$ac_t""$compiler_c_o" 1>&6 + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6 +echo "configure:3173: checking if $compiler supports -c -o file.lo" >&5 + if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + cat > conftest.$ac_ext <<EOF +#line 3184 "configure" +#include "confdefs.h" + +int main() { +int some_variable = 0; +; return 0; } +EOF +if { (eval echo configure:3191: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + +fi + + compiler_o_lo=$lt_cv_compiler_o_lo + echo "$ac_t""$compiler_o_lo" 1>&6 +else + compiler_o_lo=no +fi + +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6 +echo "configure:3222: checking if we can lock with hard links" >&5 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$ac_t""$hard_links" 1>&6 + if test "$hard_links" = no; then + echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2 + need_locks=warn + fi +else + need_locks=no +fi + +if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6 +echo "configure:3241: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + cat > conftest.$ac_ext <<EOF +#line 3247 "configure" +#include "confdefs.h" + +int main() { +int some_variable = 0; +; return 0; } +EOF +if { (eval echo configure:3254: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + CFLAGS="$save_CFLAGS" + echo "$ac_t""$compiler_rtti_exceptions" 1>&6 + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi +fi + +# See if the linker supports building shared libraries. +echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6 +echo "configure:3281: checking whether the linker ($LD) supports shared libraries" >&5 + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +old_archive_from_expsyms_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_into_libs=no +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +link_all_deplibs=unknown +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that tqcontains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. +extract_expsyms_cmds= + +case $host_os in +cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; +openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <<EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \$# in + 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to tqfind uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + shared_flag='${wl}-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # <tim.van.holder@pandora.be>, C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [12].*) + cat <<EOF 1>&2 + +*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +*** create self contained shared libraries on Solaris systems, without +*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +*** -no-undefined support, which will at least allow you to build shared +*** libraries. However, you may tqfind that when you link such libraries +*** into an application without using GCC, you have to manually add +*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +*** upgrade to a newer version of GCC. Another option is to rebuild your +*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac +fi +echo "$ac_t""$ld_shlibs" 1>&6 +test "$ld_shlibs" = no && can_build_shared=no + +# Check hardcoding attributes. +echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6 +echo "configure:3965: checking how to hardcode library paths into programs" >&5 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$ac_t""$hardcode_action" 1>&6 + +striplib= +old_striplib= +echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6 +echo "configure:3993: checking whether stripping libraries is possible" >&5 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +reload_cmds='$LD$reload_flag -o $output$reload_objs' +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +# PORTME Fill in your ld.so characteristics +echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6 +echo "configure:4007: checking dynamic linker characteristics" >&5 +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can + # not hardcode correct soname into executable. Probably we can + # add versioning support to collect2, so additional links can + # be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also tqcontains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$ac_t""$dynamic_linker" 1>&6 +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6 +echo "configure:4404: checking if libtool supports shared libraries" >&5 +echo "$ac_t""$can_build_shared" 1>&6 + +echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6 +echo "configure:4408: checking whether to build shared libraries" >&5 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +echo "$ac_t""$enable_shared" 1>&6 + +echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6 +echo "configure:4431: checking whether to build static libraries" >&5 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$ac_t""$enable_static" 1>&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + echo $ac_n "checking for shl_load""... $ac_c" 1>&6 +echo "configure:4472: checking for shl_load" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 4477 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +shl_load(); +#endif + +; return 0; } +EOF +if { (eval echo configure:4500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shl_load=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shl_load=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 +echo "configure:4518: checking for shl_load in -ldld" >&5 +ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <<EOF +#line 4526 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load(); + +int main() { +shl_load() +; return 0; } +EOF +if { (eval echo configure:4537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen""... $ac_c" 1>&6 +echo "configure:4556: checking for dlopen" >&5 +if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 4561 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +dlopen(); +#endif + +; return 0; } +EOF +if { (eval echo configure:4584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_dlopen=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_dlopen=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +echo "configure:4602: checking for dlopen in -ldl" >&5 +ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldl $LIBS" +cat > conftest.$ac_ext <<EOF +#line 4610 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { +dlopen() +; return 0; } +EOF +if { (eval echo configure:4621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 +echo "configure:4640: checking for dlopen in -lsvld" >&5 +ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsvld $LIBS" +cat > conftest.$ac_ext <<EOF +#line 4648 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { +dlopen() +; return 0; } +EOF +if { (eval echo configure:4659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 +echo "configure:4678: checking for dld_link in -ldld" >&5 +ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <<EOF +#line 4686 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link(); + +int main() { +dld_link() +; return 0; } +EOF +if { (eval echo configure:4697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +else + echo "$ac_t""no" 1>&6 +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 +echo "configure:4753: checking whether a program can dlopen itself" >&5 +if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<EOF +#line 4763 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + tqfind out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo configure:4824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi + +echo "$ac_t""$lt_cv_dlopen_self" 1>&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 +echo "configure:4847: checking whether a statically linked program can dlopen itself" >&5 +if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<EOF +#line 4857 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + tqfind out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi + +echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6 +echo "configure:4967: checking whether -lc should be explicitly linked in" >&5 + if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + $rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if { (eval echo configure:4974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo configure:4987: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi +fi + + echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6 + ;; + esac +fi +need_lc=${lt_cv_archive_cmds_need_lc-yes} + +# The second clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + : +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi + +if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that tqcontains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$need_lc + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# The default C compiler. +CC=$lt_CC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that tqcontains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_pic_flag +pic_mode=$pic_mode + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$lt_compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker tqfinds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include <windows.h> +# #undef WIN32_LEAN_AND_MEAN +# #include <stdio.h> +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include <cygwin/cygwin_dll.h> +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include <stdio.h> /* for printf() */ +# #include <unistd.h> /* for open(), lseek(), read() */ +# #include <fcntl.h> /* for O_RDONLY, O_BINARY */ +# #include <string.h> /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i<nexp; i++) +# { +# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); +# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); +# } +# +# return 0; +# } +# /* impgen.c ends here */ + +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if tqfinds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Prevent multiple expansion + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:5580: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +# Check whether --enable-largefile or --disable-largefile was given. +if test "${enable_largefile+set}" = set; then + enableval="$enable_largefile" + : +fi + + if test "$enable_largefile" != no; then + + echo $ac_n "checking for special C compiler options needed for large files""... $ac_c" 1>&6 +echo "configure:5642: checking for special C compiler options needed for large files" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_largefile_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_largefile_CC=no + if test "$GCC" != yes; then + # IRIX 6.2 and later do not support large files by default, + # so use the C compiler's -n32 option if that helps. + cat > conftest.$ac_ext <<EOF +#line 5651 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5660: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_save_CC="$CC" + CC="$CC -n32" + cat > conftest.$ac_ext <<EOF +#line 5669 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5678: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_sys_largefile_CC=' -n32' +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + CC="$ac_save_CC" +fi +rm -f conftest* + fi +fi + +echo "$ac_t""$ac_cv_sys_largefile_CC" 1>&6 + if test "$ac_cv_sys_largefile_CC" != no; then + CC="$CC$ac_cv_sys_largefile_CC" + fi + + echo $ac_n "checking for _FILE_OFFSET_BITS value needed for large files""... $ac_c" 1>&6 +echo "configure:5698: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_file_offset_bits=no + cat > conftest.$ac_ext <<EOF +#line 5704 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + + + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + cat > conftest.$ac_ext <<EOF +#line 5722 "configure" +#include "confdefs.h" +#define _FILE_OFFSET_BITS 64 +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + + + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5734: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_sys_file_offset_bits=64 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_sys_file_offset_bits" 1>&6 + if test "$ac_cv_sys_file_offset_bits" != no; then + cat >> confdefs.h <<EOF +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits +EOF + + fi + echo $ac_n "checking for _LARGEFILE_SOURCE value needed for large files""... $ac_c" 1>&6 +echo "configure:5754: checking for _LARGEFILE_SOURCE value needed for large files" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_largefile_source'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_largefile_source=no + cat > conftest.$ac_ext <<EOF +#line 5760 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +#include <stdio.h> + +int main() { +return !ftello; +; return 0; } +EOF +if { (eval echo configure:5771: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + cat > conftest.$ac_ext <<EOF +#line 5778 "configure" +#include "confdefs.h" +#define _LARGEFILE_SOURCE 1 +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +#include <stdio.h> + +int main() { +return !ftello; +; return 0; } +EOF +if { (eval echo configure:5790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_sys_largefile_source=1 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_sys_largefile_source" 1>&6 + if test "$ac_cv_sys_largefile_source" != no; then + cat >> confdefs.h <<EOF +#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source +EOF + + fi + echo $ac_n "checking for _LARGE_FILES value needed for large files""... $ac_c" 1>&6 +echo "configure:5810: checking for _LARGE_FILES value needed for large files" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_large_files=no + cat > conftest.$ac_ext <<EOF +#line 5816 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + + + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5827: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + cat > conftest.$ac_ext <<EOF +#line 5834 "configure" +#include "confdefs.h" +#define _LARGE_FILES 1 +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + + + +int main() { + +; return 0; } +EOF +if { (eval echo configure:5846: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_sys_large_files=1 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_sys_large_files" 1>&6 + if test "$ac_cv_sys_large_files" != no; then + cat >> confdefs.h <<EOF +#define _LARGE_FILES $ac_cv_sys_large_files +EOF + + fi + echo $ac_n "checking for _XOPEN_SOURCE value needed for large files""... $ac_c" 1>&6 +echo "configure:5866: checking for _XOPEN_SOURCE value needed for large files" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_xopen_source'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_xopen_source=no + cat > conftest.$ac_ext <<EOF +#line 5872 "configure" +#include "confdefs.h" +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +#include <stdio.h> + +int main() { +return !ftello; +; return 0; } +EOF +if { (eval echo configure:5883: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + cat > conftest.$ac_ext <<EOF +#line 5890 "configure" +#include "confdefs.h" +#define _XOPEN_SOURCE 500 +#include <sys/types.h> + int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1]; + +#include <stdio.h> + +int main() { +return !ftello; +; return 0; } +EOF +if { (eval echo configure:5902: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_sys_xopen_source=500 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_sys_xopen_source" 1>&6 + if test "$ac_cv_sys_xopen_source" != no; then + cat >> confdefs.h <<EOF +#define _XOPEN_SOURCE $ac_cv_sys_xopen_source +EOF + + fi + fi + + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:5925: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 5930 "configure" +#include "confdefs.h" +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:5938: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 5955 "configure" +#include "confdefs.h" +#include <string.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 5973 "configure" +#include "confdefs.h" +#include <stdlib.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext <<EOF +#line 5994 "configure" +#include "confdefs.h" +#include <ctype.h> +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:6005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + + +echo $ac_n "checking for working const""... $ac_c" 1>&6 +echo "configure:6030: checking for working const" >&5 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 6035 "configure" +#include "confdefs.h" + +int main() { + +/* Ultrix mips cc rejects this. */ +typedef int charset[2]; const charset x; +/* SunOS 4.1.1 cc rejects this. */ +char const *const *ccp; +char **p; +/* NEC SVR4.0.2 mips cc rejects this. */ +struct point {int x, y;}; +static struct point const zero = {0,0}; +/* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in an arm + of an if-expression whose if-part is not a constant expression */ +const char *g = "string"; +ccp = &g + (g ? g-g : 0); +/* HPUX 7.0 cc rejects these. */ +++ccp; +p = (char**) ccp; +ccp = (char const *const *) p; +{ /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; +} +{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; +} +{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; +} +{ /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; +} +{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; +} + +; return 0; } +EOF +if { (eval echo configure:6084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_const=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_const=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_c_const" 1>&6 +if test $ac_cv_c_const = no; then + cat >> confdefs.h <<\EOF +#define const +EOF + +fi + + +echo $ac_n "checking for pow""... $ac_c" 1>&6 +echo "configure:6106: checking for pow" >&5 +if eval "test \"`echo '$''{'ac_cv_func_pow'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 6111 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char pow(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pow(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_pow) || defined (__stub___pow) +choke me +#else +pow(); +#endif + +; return 0; } +EOF +if { (eval echo configure:6134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_pow=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_pow=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'pow`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for pow in -lm""... $ac_c" 1>&6 +echo "configure:6152: checking for pow in -lm" >&5 +ac_lib_var=`echo m'_'pow | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lm $LIBS" +cat > conftest.$ac_ext <<EOF +#line 6160 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pow(); + +int main() { +pow() +; return 0; } +EOF +if { (eval echo configure:6171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -lm" +else + echo "$ac_t""no" 1>&6 +fi + +fi + + + + +cat >> confdefs.h <<\EOF +#define MNG_SUPPORT_FULL 1 +EOF + + +# Check whether --enable-read or --disable-read was given. +if test "${enable_read+set}" = set; then + enableval="$enable_read" + : +fi + +if test "x$enable_read" != "xno"; then + cat >> confdefs.h <<\EOF +#define MNG_SUPPORT_READ 1 +EOF + +fi + +# Check whether --enable-write or --disable-write was given. +if test "${enable_write+set}" = set; then + enableval="$enable_write" + : +fi + +if test "x$enable_write" != "xno"; then + cat >> confdefs.h <<\EOF +#define MNG_SUPPORT_WRITE 1 +EOF + +fi + +# Check whether --enable-display or --disable-display was given. +if test "${enable_display+set}" = set; then + enableval="$enable_display" + : +fi + +if test "x$enable_display" != "xno"; then + cat >> confdefs.h <<\EOF +#define MNG_SUPPORT_DISPLAY 1 +EOF + +fi + +# Check whether --enable-chunks or --disable-chunks was given. +if test "${enable_chunks+set}" = set; then + enableval="$enable_chunks" + : +fi + +if test "x$enable_chunks" != "xno"; then + cat >> confdefs.h <<\EOF +#define MNG_ACCESS_CHUNKS 1 +EOF + +fi + +# Check whether --enable-storechunks or --disable-storechunks was given. +if test "${enable_storechunks+set}" = set; then + enableval="$enable_storechunks" + +if test "x$enable_storechunks" != "xno"; then + cat >> confdefs.h <<\EOF +#define MNG_STORE_CHUNKS 1 +EOF + +fi + +fi + + +# Check whether --enable-trace or --disable-trace was given. +if test "${enable_trace+set}" = set; then + enableval="$enable_trace" + +if test "x$enable_trace" = "xyes"; then + cat >> confdefs.h <<\EOF +#define MNG_SUPPORT_TRACE 1 +EOF + + cat >> confdefs.h <<\EOF +#define MNG_TRACE_TELLTALE 1 +EOF + +fi + +fi + + +cat >> confdefs.h <<\EOF +#define MNG_ERROR_TELLTALE 1 +EOF + + + +# Check whether --with-zlib or --without-zlib was given. +if test "${with_zlib+set}" = set; then + withval="$with_zlib" + + if test -d "$withval"; then + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + fi + +fi + +ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for zlib.h""... $ac_c" 1>&6 +echo "configure:6304: checking for zlib.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 6309 "configure" +#include "confdefs.h" +#include <zlib.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:6314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for gzread in -lz""... $ac_c" 1>&6 +echo "configure:6331: checking for gzread in -lz" >&5 +ac_lib_var=`echo z'_'gzread | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lz $LIBS" +cat > conftest.$ac_ext <<EOF +#line 6339 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gzread(); + +int main() { +gzread() +; return 0; } +EOF +if { (eval echo configure:6350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo z | sed -e 's/^a-zA-Z0-9_/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <<EOF +#define $ac_tr_lib 1 +EOF + + LIBS="-lz $LIBS" + +else + echo "$ac_t""no" 1>&6 +{ echo "configure: error: zlib library not found" 1>&2; exit 1; } +fi + +else + echo "$ac_t""no" 1>&6 +{ echo "configure: error: zlib header not found" 1>&2; exit 1; } + +fi + + +# Check whether --with-jpeg or --without-jpeg was given. +if test "${with_jpeg+set}" = set; then + withval="$with_jpeg" + with_jpeg=$withval +else + with_jpeg=_auto +fi + + + if test "x$with_jpeg" != "xno" -a "x$with_jpeg" != "xyes" -a \ + "x$with_jpeg" != "x_auto"; then + # Save in case test with directory specified fails + _cppflags=${CPPFLAGS} + _ldflags=${LDFLAGS} + _restore=1 + + CPPFLAGS="${CPPFLAGS} -I$withval/include" + LDFLAGS="${LDFLAGS} -L$withval/lib" + else + _restore=0 + fi + + if test "x$with_jpeg" != "xno"; then + ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6 +echo "configure:6410: checking for jpeglib.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 6415 "configure" +#include "confdefs.h" +#include <jpeglib.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:6420: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6 +echo "configure:6437: checking for jpeg_read_header in -ljpeg" >&5 +ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ljpeg $LIBS" +cat > conftest.$ac_ext <<EOF +#line 6445 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char jpeg_read_header(); + +int main() { +jpeg_read_header() +; return 0; } +EOF +if { (eval echo configure:6456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + + LIBS="$LIBS -ljpeg" + cat >> confdefs.h <<\EOF +#define HAVE_LIBJPEG 1 +EOF + + _restore=0 + +else + echo "$ac_t""no" 1>&6 +echo "configure: warning: jpeg library not found" 1>&2 +fi + +else + echo "$ac_t""no" 1>&6 +echo "configure: warning: jpeg header not found" 1>&2 + +fi + + fi + + test $_restore -eq 1 && CPPFLAGS=$_cppflags LDFLAGS=$_ldflags + +# Check whether --with-lcms or --without-lcms was given. +if test "${with_lcms+set}" = set; then + withval="$with_lcms" + with_lcms=$withval +else + with_lcms=_auto +fi + + + if test "x$with_lcms" != "xno" -a "x$with_lcms" != "xyes" -a \ + "x$with_lcms" != "x_auto"; then + # Save in case test with directory specified fails + _cppflags=$CPPFLAGS + _ldflags=$LDFLAGS + _restore=1 + + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + else + _restore=0 + fi + + if test "x$with_lcms" != "xno"; then + ac_safe=`echo "lcms.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for lcms.h""... $ac_c" 1>&6 +echo "configure:6519: checking for lcms.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 6524 "configure" +#include "confdefs.h" +#include <lcms.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:6529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + + have_lcms=yes + echo $ac_n "checking for cmsCreateRGBProfile in -llcms""... $ac_c" 1>&6 +echo "configure:6548: checking for cmsCreateRGBProfile in -llcms" >&5 +ac_lib_var=`echo lcms'_'cmsCreateRGBProfile | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-llcms $LIBS" +cat > conftest.$ac_ext <<EOF +#line 6556 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char cmsCreateRGBProfile(); + +int main() { +cmsCreateRGBProfile() +; return 0; } +EOF +if { (eval echo configure:6567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + + LIBS="$LIBS -llcms" + cat >> confdefs.h <<\EOF +#define HAVE_LIBLCMS 1 +EOF + + cat >> confdefs.h <<\EOF +#define MNG_FULL_CMS 1 +EOF + + _restore=0 + have_lcms=yes + +else + echo "$ac_t""no" 1>&6 + + have_lcms=no + +fi + + +else + echo "$ac_t""no" 1>&6 +fi + + if test "x$with_lcms" != "x_auto" -a "x$have_lcms" != "xyes"; then + echo "configure: warning: lcms not found... disabling CMS support" 1>&2 + fi + fi + + test $_restore -eq 1 && CPPFLAGS=$_cppflags LDFLAGS=$_ldflags + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it tqcontains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS <<EOF +#! /bin/sh +# Generated automatically by configure. +# Run this file to recreate the current configuration. +# This directory was configured as follows, +# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@SET_MAKE@%$SET_MAKE%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@U@%$U%g +s%@ANSI2KNR@%$ANSI2KNR%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@LN_S@%$LN_S%g +s%@OBJEXT@%$OBJEXT%g +s%@EXEEXT@%$EXEEXT%g +s%@ECHO@%$ECHO%g +s%@RANLIB@%$RANLIB%g +s%@STRIP@%$STRIP%g +s%@LIBTOOL@%$LIBTOOL%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <<EOF + +CONFIG_FILES=\${CONFIG_FILES-"Makefile"} +EOF +cat >> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <<EOF + +EOF +cat >> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + |