From dda8474928bd7276e1fad8fb7a601e7c83ff2bc2 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 10 Jul 2011 15:17:53 -0500 Subject: Added TQt4 HEAD --- tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp | 1265 +++++++++++++++++++++ 1 file changed, 1265 insertions(+) create mode 100644 tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp (limited to 'tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp') diff --git a/tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp b/tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp new file mode 100644 index 0000000..83cc094 --- /dev/null +++ b/tqtinterface/qt4/src/kernel/tqnetworkprotocol.cpp @@ -0,0 +1,1265 @@ +/**************************************************************************** +** +** Implementation of TQNetworkProtocol class +** +** Created : 950429 +** +** Copyright (C) 2010 Timothy Pearson and (C) 1992-2008 Trolltech ASA. +** +** This file is part of the kernel module of the TQt GUI Toolkit. +** +** This file may be used under the terms of the GNU General +** Public License versions 2.0 or 3.0 as published by the Free +** Software Foundation and appearing in the files LICENSE.GPL2 +** and LICENSE.GPL3 included in the packaging of this file. +** Alternatively you may (at your option) use any later version +** of the GNU General Public License if such license has been +** publicly approved by Trolltech ASA (or its successors, if any) +** and the KDE Free TQt Foundation. +** +** Please review the following information to ensure GNU General +** Public Licensing requirements will be met: +** http://trolltech.com/products/qt/licenses/licensing/opensource/. +** If you are unsure which license is appropriate for your use, please +** review the following information: +** http://trolltech.com/products/qt/licenses/licensing/licensingoverview +** or contact the sales department at sales@trolltech.com. +** +** This file may be used under the terms of the Q Public License as +** defined by Trolltech ASA and appearing in the file LICENSE.TQPL +** included in the packaging of this file. Licensees holding valid TQt +** Commercial licenses may use this file in accordance with the TQt +** Commercial License Agreement provided with the Software. +** +** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, +** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted +** herein. +** +**********************************************************************/ + +#include "tqnetworkprotocol.h" + +#ifndef TQT_NO_NETWORKPROTOCOL + +#include "tqlocalfs.h" +#include "tqurloperator.h" +#include "tqtimer.h" +#include "tqmap.h" +#include "tqptrqueue.h" + +//#define TQNETWORKPROTOCOL_DEBUG +#define NETWORK_OP_DELAY 1000 + +extern TQ_EXPORT TQNetworkProtocolDict *qNetworkProtocolRegister; + +TQNetworkProtocolDict *qNetworkProtocolRegister = 0; + +class TQNetworkProtocolPrivate +{ +public: + TQNetworkProtocolPrivate( TQNetworkProtocol *p ) + { + url = 0; + opInProgress = 0; + opStartTimer = new TQTimer( p ); + removeTimer = new TQTimer( p ); + operationQueue.setAutoDelete( FALSE ); + autoDelete = FALSE; + removeInterval = 10000; + oldOps.setAutoDelete( FALSE ); + } + + ~TQNetworkProtocolPrivate() + { + removeTimer->stop(); + if ( opInProgress ) { + if ( opInProgress == operationQueue.head() ) + operationQueue.dequeue(); + opInProgress->free(); + } + while ( operationQueue.head() ) { + operationQueue.head()->free(); + operationQueue.dequeue(); + } + while ( oldOps.first() ) { + oldOps.first()->free(); + oldOps.removeFirst(); + } + delete opStartTimer; + } + + TQUrlOperator *url; + TQPtrQueue< TQNetworkOperation > operationQueue; + TQNetworkOperation *opInProgress; + TQTimer *opStartTimer, *removeTimer; + int removeInterval; + bool autoDelete; + TQPtrList< TQNetworkOperation > oldOps; +}; + +/*! + \class TQNetworkProtocol tqnetworkprotocol.h + \brief The TQNetworkProtocol class provides a common API for network protocols. +\if defined(commercial) + It is part of the TQt Enterprise Edition. +\endif + + \module network + \ingroup io + \module network + \mainclass + + This is a base class which should be used for network protocols + implementations that can then be used in TQt (e.g. in the file + dialog) together with the TQUrlOperator. + + The easiest way to implement a new network protocol is to + reimplement the operation*() methods, e.g. operationGet(), etc. + Only the supported operations should be reimplemented. To specify + which operations are supported, also reimplement + supportedOperations() and return an int that is OR'd together + using the supported operations from the \l + TQNetworkProtocol::Operation enum. + + When you implement a network protocol this way, it is important to + emit the correct Q_SIGNALS. Also, always emit the finished() signal + when an operation is done (on success \e and on failure). TQt + relies on correctly emitted finished() Q_SIGNALS. + + For a detailed description of the TQt Network Architecture and how + to implement and use network protocols in TQt, see the \link + network.html TQt Network Documentation\endlink. +*/ + +/*! + \fn void TQNetworkProtocol::newChildren( const TQValueList &i, TQNetworkOperation *op ) + + This signal is emitted after listChildren() was called and new + tqchildren (files) have been read from the list of files. \a i holds + the information about the new tqchildren. \a op is the pointer to + the operation object which tqcontains all the information about the + operation, including the state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. + + When implementing your own network protocol and reading tqchildren, + you usually don't read one child at once, but rather a list of + them. That's why this signal takes a list of TQUrlInfo objects. If + you prefer to read just one child at a time you can use the + convenience signal newChild(), which takes a single TQUrlInfo + object. +*/ + +/*! + \fn void TQNetworkProtocol::newChild( const TQUrlInfo &i, TQNetworkOperation *op ) + + This signal is emitted if a new child (file) has been read. + TQNetworkProtocol automatically connects it to a slot which creates + a list of TQUrlInfo objects (with just one TQUrlInfo \a i) and emits + the newChildren() signal with this list. \a op is the pointer to + the operation object which tqcontains all the information about the + operation that has finished, including the state, etc. + + This is just a convenience signal useful for implementing your own + network protocol. In all other cases connect to the newChildren() + signal with its list of TQUrlInfo objects. +*/ + +/*! + \fn void TQNetworkProtocol::finished( TQNetworkOperation *op ) + + This signal is emitted when an operation finishes. This signal is + always emitted, for both success and failure. \a op is the pointer + to the operation object which tqcontains all the information about + the operation, including the state, etc. Check the state and error + code of the operation object to determine whether or not the + operation was successful. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::start( TQNetworkOperation *op ) + + Some operations (such as listChildren()) emit this signal when + they start processing the operation. \a op is the pointer to the + operation object which tqcontains all the information about the + operation, including the state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::createdDirectory( const TQUrlInfo &i, TQNetworkOperation *op ) + + This signal is emitted when mkdir() has been succesful and the + directory has been created. \a i holds the information about the + new directory. \a op is the pointer to the operation object which + tqcontains all the information about the operation, including the + state, etc. Using op->arg( 0 ), you can get the file name of the + new directory. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::removed( TQNetworkOperation *op ) + + This signal is emitted when remove() has been succesful and the + file has been removed. \a op holds the file name of the removed + file in the first argument, accessible with op->arg( 0 ). \a op is + the pointer to the operation object which tqcontains all the + information about the operation, including the state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::itemChanged( TQNetworkOperation *op ) + + This signal is emitted whenever a file which is a child of this + URL has been changed, e.g. by successfully calling rename(). \a op + holds the original and the new file names in the first and second + arguments, accessible with op->arg( 0 ) and op->arg( 1 ) + respectively. \a op is the pointer to the operation object which + tqcontains all the information about the operation, including the + state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::data( const TQByteArray &data, + TQNetworkOperation *op ) + + This signal is emitted when new \a data has been received after + calling get() or put(). \a op holds the name of the file from + which data is retrieved or uploaded in its first argument, and the + (raw) data in its second argument. You can get them with + op->arg( 0 ) and op->rawArg( 1 ). \a op is the pointer to the + operation object, which tqcontains all the information about the + operation, including the state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator (which is used by the network + protocol) emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::dataTransferProgress( int bytesDone, int bytesTotal, TQNetworkOperation *op ) + + This signal is emitted during the transfer of data (using put() or + get()). \a bytesDone is how many bytes of \a bytesTotal have been + transferred. \a bytesTotal may be -1, which means that the total + number of bytes is not known. \a op is the pointer to the + operation object which tqcontains all the information about the + operation, including the state, etc. + + When a protocol emits this signal, TQNetworkProtocol is smart + enough to let the TQUrlOperator, which is used by the network + protocol, emit its corresponding signal. +*/ + +/*! + \fn void TQNetworkProtocol::connectionStateChanged( int state, const TQString &data ) + + This signal is emitted whenever the state of the connection of the + network protocol is changed. \a state describes the new state, + which is one of, \c ConHostFound, \c ConConnected or \c ConClosed. + \a data is a message text. +*/ + +/*! + \enum TQNetworkProtocol::State + + This enum tqcontains the state that a TQNetworkOperation can have. + + \value StWaiting The operation is in the TQNetworkProtocol's queue + waiting to be prcessed. + + \value StInProgress The operation is being processed. + + \value StDone The operation has been processed succesfully. + + \value StFailed The operation has been processed but an error occurred. + + \value StStopped The operation has been processed but has been + stopped before it finished, and is waiting to be processed. + +*/ + +/*! + \enum TQNetworkProtocol::Operation + + This enum lists the possible operations that a network protocol + can support. supportedOperations() returns an int of these that is + OR'd together. Also, the type() of a TQNetworkOperation is always + one of these values. + + \value OpListChildren List the tqchildren of a URL, e.g. of a directory. + \value OpMkDir Create a directory. + \value OpRemove Remove a child (e.g. a file). + \value OpRename Rename a child (e.g. a file). + \value OpGet Get data from a location. + \value OpPut Put data to a location. +*/ + +/*! + \enum TQNetworkProtocol::ConnectionState + + When the connection state of a network protocol changes it emits + the signal connectionStateChanged(). The first argument is one of + the following values: + + \value ConHostFound Host has been found. + \value ConConnected Connection to the host has been established. + \value ConClosed Connection has been closed. +*/ + +/*! + \enum TQNetworkProtocol::Error + + When an operation fails (finishes unsuccessfully), the + TQNetworkOperation of the operation returns an error code which has + one of the following values: + + \value NoError No error occurred. + + \value ErrValid The URL you are operating on is not valid. + + \value ErrUnknownProtocol There is no protocol implementation + available for the protocol of the URL you are operating on (e.g. + if the protocol is http and no http implementation has been + registered). + + \value ErrUnsupported The operation is not supported by the + protocol. + + \value ErrParse The URL could not be parsed correctly. + + \value ErrLoginIncorrect You needed to login but the username + or password is wrong. + + \value ErrHostNotFound The specified host (in the URL) couldn't + be found. + + \value ErrListChildren An error occurred while listing the + tqchildren (files). + + \value ErrMkDir An error occurred when creating a directory. + + \value ErrRemove An error occurred when removing a child (file). + + \value ErrRename An error occurred when renaming a child (file). + + \value ErrGet An error occurred while getting (retrieving) data. + + \value ErrPut An error occurred while putting (uploading) data. + + \value ErrFileNotExisting A file which is needed by the operation + doesn't exist. + + \value ErrPermissionDenied Permission for doing the operation has + been denied. + + You should also use these error codes when implementing custom + network protocols. If this is not possible, you can define your own + error codes by using integer values that don't conflict with any + of these values. +*/ + +/*! + Constructor of the network protocol base class. Does some + initialization and connecting of Q_SIGNALS and Q_SLOTS. +*/ + +TQNetworkProtocol::TQNetworkProtocol() + : TQObject() +{ + d = new TQNetworkProtocolPrivate( this ); + + connect( d->opStartTimer, TQT_SIGNAL( timeout() ), + this, TQT_SLOT( startOps() ) ); + connect( d->removeTimer, TQT_SIGNAL( timeout() ), + this, TQT_SLOT( removeMe() ) ); + + if ( url() ) { + connect( this, TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( finished(TQNetworkOperation*) ), + url(), TQT_SIGNAL( finished(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( start(TQNetworkOperation*) ), + url(), TQT_SIGNAL( start(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SLOT( addEntry(const TQValueList&) ) ); + connect( this, TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( removed(TQNetworkOperation*) ), + url(), TQT_SIGNAL( removed(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( itemChanged(TQNetworkOperation*) ), + url(), TQT_SIGNAL( itemChanged(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ), + url(), TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( connectionStateChanged(int,const TQString&) ), + url(), TQT_SIGNAL( connectionStateChanged(int,const TQString&) ) ); + } + + connect( this, TQT_SIGNAL( finished(TQNetworkOperation*) ), + this, TQT_SLOT( processNextOperation(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( newChild(const TQUrlInfo&,TQNetworkOperation*) ), + this, TQT_SLOT( emitNewChildren(const TQUrlInfo&,TQNetworkOperation*) ) ); + +} + +/*! + Destructor. +*/ + +TQNetworkProtocol::~TQNetworkProtocol() +{ + delete d; +} + +/*! + Sets the TQUrlOperator, on which the protocol works, to \a u. + + \sa TQUrlOperator +*/ + +void TQNetworkProtocol::setUrl( TQUrlOperator *u ) +{ + if ( url() ) { + disconnect( this, TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( finished(TQNetworkOperation*) ), + url(), TQT_SIGNAL( finished(TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( start(TQNetworkOperation*) ), + url(), TQT_SIGNAL( start(TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SLOT( addEntry(const TQValueList&) ) ); + disconnect( this, TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( removed(TQNetworkOperation*) ), + url(), TQT_SIGNAL( removed(TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( itemChanged(TQNetworkOperation*) ), + url(), TQT_SIGNAL( itemChanged(TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ), + url(), TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) ); + disconnect( this, TQT_SIGNAL( connectionStateChanged(int,const TQString&) ), + url(), TQT_SIGNAL( connectionStateChanged(int,const TQString&) ) ); + } + + + // ### if autoDelete is TRUE, we should delete the TQUrlOperator (something + // like below; but that is not possible since it would delete this, too). + //if ( d->autoDelete && (d->url!=u) ) { + // delete d->url; // destructor deletes the network protocol + //} + d->url = u; + + if ( url() ) { + connect( this, TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( finished(TQNetworkOperation*) ), + url(), TQT_SIGNAL( finished(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( start(TQNetworkOperation*) ), + url(), TQT_SIGNAL( start(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( newChildren(const TQValueList&,TQNetworkOperation*) ), + url(), TQT_SLOT( addEntry(const TQValueList&) ) ); + connect( this, TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ), + url(), TQT_SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( removed(TQNetworkOperation*) ), + url(), TQT_SIGNAL( removed(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( itemChanged(TQNetworkOperation*) ), + url(), TQT_SIGNAL( itemChanged(TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ), + url(), TQT_SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) ); + connect( this, TQT_SIGNAL( connectionStateChanged(int,const TQString&) ), + url(), TQT_SIGNAL( connectionStateChanged(int,const TQString&) ) ); + } + + if ( !d->opInProgress && !d->operationQueue.isEmpty() ) + d->opStartTimer->start( 0, TRUE ); +} + +/*! + For processing operations the network protocol base class calls + this method quite often. This should be reimplemented by new + network protocols. It should return TRUE if the connection is OK + (open); otherwise it should return FALSE. If the connection is not + open the protocol should open it. + + If the connection can't be opened (e.g. because you already tried + but the host couldn't be found), set the state of \a op to + TQNetworkProtocol::StFailed and emit the finished() signal with + this TQNetworkOperation as argument. + + \a op is the operation that needs an open connection. +*/ + +bool TQNetworkProtocol::checkConnection( TQNetworkOperation * ) +{ + return TRUE; +} + +/*! + Returns an int that is OR'd together using the enum values of + \l{TQNetworkProtocol::Operation}, which describes which operations + are supported by the network protocol. Should be reimplemented by + new network protocols. +*/ + +int TQNetworkProtocol::supportedOperations() const +{ + return 0; +} + +/*! + Adds the operation \a op to the operation queue. The operation + will be processed as soon as possible. This method returns + immediately. +*/ + +void TQNetworkProtocol::addOperation( TQNetworkOperation *op ) +{ +#ifdef TQNETWORKPROTOCOL_DEBUG + qDebug( "TQNetworkOperation: addOperation: %p %d", op, op->operation() ); +#endif + d->operationQueue.enqueue( op ); + if ( !d->opInProgress ) + d->opStartTimer->start( 0, TRUE ); +} + +/*! + Static method to register a network protocol for TQt. For example, + if you have an implementation of NNTP (called Nntp) which is + derived from TQNetworkProtocol, call: + \code + TQNetworkProtocol::registerNetworkProtocol( "nntp", new TQNetworkProtocolFactory ); + \endcode + after which your implementation is registered for future nntp + operations. + + The name of the protocol is given in \a protocol and a pointer to + the protocol factory is given in \a protocolFactory. +*/ + +void TQNetworkProtocol::registerNetworkProtocol( const TQString &protocol, + TQNetworkProtocolFactoryBase *protocolFactory ) +{ + if ( !qNetworkProtocolRegister ) { + qNetworkProtocolRegister = new TQNetworkProtocolDict; + TQNetworkProtocol::registerNetworkProtocol( "file", new TQNetworkProtocolFactory< TQLocalFs > ); + } + + qNetworkProtocolRegister->insert( protocol, protocolFactory ); +} + +/*! + Static method to get a new instance of the network protocol \a + protocol. For example, if you need to do some FTP operations, do + the following: + \code + TQFtp *ftp = TQNetworkProtocol::getNetworkProtocol( "ftp" ); + \endcode + This returns a pointer to a new instance of an ftp implementation + or null if no protocol for ftp was registered. The ownership of + the pointer is transferred to you, so you must delete it if you + don't need it anymore. + + Normally you should not work directly with network protocols, so + you will not need to call this method yourself. Instead, use + TQUrlOperator, which makes working with network protocols much more + convenient. + + \sa TQUrlOperator +*/ + +TQNetworkProtocol *TQNetworkProtocol::getNetworkProtocol( const TQString &protocol ) +{ + if ( !qNetworkProtocolRegister ) { + qNetworkProtocolRegister = new TQNetworkProtocolDict; + TQNetworkProtocol::registerNetworkProtocol( "file", new TQNetworkProtocolFactory< TQLocalFs > ); + } + + if ( protocol.isNull() ) + return 0; + + TQNetworkProtocolFactoryBase *factory = qNetworkProtocolRegister->tqfind( protocol ); + if ( factory ) + return factory->createObject(); + + return 0; +} + +/*! + Returns TRUE if the only protocol registered is for working on the + local filesystem; returns FALSE if other network protocols are + also registered. +*/ + +bool TQNetworkProtocol::hasOnlyLocalFileSystem() +{ + if ( !qNetworkProtocolRegister ) + return FALSE; + + TQDictIterator< TQNetworkProtocolFactoryBase > it( *qNetworkProtocolRegister ); + for ( ; it.current(); ++it ) + if ( it.currentKey() != "file" ) + return FALSE; + return TRUE; +} + +/*! + \internal + Starts processing network operations. +*/ + +void TQNetworkProtocol::startOps() +{ +#ifdef TQNETWORKPROTOCOL_DEBUG + qDebug( "TQNetworkOperation: start processing operations" ); +#endif + processNextOperation( 0 ); +} + +/*! + \internal + Processes the operation \a op. It calls the + corresponding operation[something]( TQNetworkOperation * ) + methods. +*/ + +void TQNetworkProtocol::processOperation( TQNetworkOperation *op ) +{ + if ( !op ) + return; + + switch ( op->operation() ) { + case OpListChildren: + operationListChildren( op ); + break; + case OpMkDir: + operationMkDir( op ); + break; + case OpRemove: + operationRemove( op ); + break; + case OpRename: + operationRename( op ); + break; + case OpGet: + operationGet( op ); + break; + case OpPut: + operationPut( op ); + break; + } +} + +/*! + When implementing a new network protocol, this method should be + reimplemented if the protocol supports listing tqchildren (files); + this method should then process this TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which describes in + detail how to reimplement this method. You may also want to look + at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationListChildren( TQNetworkOperation * ) +{ +} + +/*! + When implementing a new network protocol, this method should be + reimplemented if the protocol supports making directories; this + method should then process this TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which describes in + detail how to reimplement this method. You may also want to look + at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationMkDir( TQNetworkOperation * ) +{ +} + +/*! + When implementing a new network protocol, this method should be + reimplemented if the protocol supports removing tqchildren (files); + this method should then process this TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which is describes + in detail how to reimplement this method. You may also want to + look at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationRemove( TQNetworkOperation * ) +{ +} + +/*! + When implementing a new newtork protocol, this method should be + reimplemented if the protocol supports renaming tqchildren (files); + this method should then process this TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which describes in + detail how to reimplement this method. You may also want to look + at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationRename( TQNetworkOperation * ) +{ +} + +/*! + When implementing a new network protocol, this method should be + reimplemented if the protocol supports getting data; this method + should then process the TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which describes in + detail how to reimplement this method. You may also want to look + at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationGet( TQNetworkOperation * ) +{ +} + +/*! + When implementing a new network protocol, this method should be + reimplemented if the protocol supports putting (uploading) data; + this method should then process the TQNetworkOperation. + + When you reimplement this method it's very important that you emit + the correct Q_SIGNALS at the correct time (especially the finished() + signal after processing an operation). Take a look at the \link + network.html TQt Network Documentation\endlink which describes in + detail how to reimplement this method. You may also want to look + at the example implementation in + examples/network/networkprotocol/nntp.cpp. + + \a op is the pointer to the operation object which tqcontains all + the information on the operation that has finished, including the + state, etc. +*/ + +void TQNetworkProtocol::operationPut( TQNetworkOperation * ) +{ +} + +/*! \internal +*/ + +void TQNetworkProtocol::operationPutChunk( TQNetworkOperation * ) +{ +} + +/*! + \internal + Handles operations. Deletes the previous operation object and + tries to process the next operation. It also checks the connection state + and only processes the next operation, if the connection of the protocol + is open. Otherwise it waits until the protocol opens the connection. +*/ + +void TQNetworkProtocol::processNextOperation( TQNetworkOperation *old ) +{ +#ifdef TQNETWORKPROTOCOL_DEBUG + qDebug( "TQNetworkOperation: process next operation, old: %p", old ); +#endif + d->removeTimer->stop(); + + if ( old ) + d->oldOps.append( old ); + if ( d->opInProgress && d->opInProgress!=old ) + d->oldOps.append( d->opInProgress ); + + if ( d->operationQueue.isEmpty() ) { + d->opInProgress = 0; + if ( d->autoDelete ) + d->removeTimer->start( d->removeInterval, TRUE ); + return; + } + + TQNetworkOperation *op = d->operationQueue.head(); + + d->opInProgress = op; + + if ( !checkConnection( op ) ) { + if ( op->state() != TQNetworkProtocol::StFailed ) { + d->opStartTimer->start( 0, TRUE ); + } else { + d->operationQueue.dequeue(); + clearOperationQueue(); + emit finished( op ); + } + + return; + } + + d->opInProgress = op; + d->operationQueue.dequeue(); + processOperation( op ); +} + +/*! + Returns the TQUrlOperator on which the protocol works. +*/ + +TQUrlOperator *TQNetworkProtocol::url() const +{ + return d->url; +} + +/*! + Returns the operation, which is being processed, or 0 of no + operation is being processed at the moment. +*/ + +TQNetworkOperation *TQNetworkProtocol::operationInProgress() const +{ + return d->opInProgress; +} + +/*! + Clears the operation queue. +*/ + +void TQNetworkProtocol::clearOperationQueue() +{ + d->operationQueue.dequeue(); + d->operationQueue.setAutoDelete( TRUE ); + d->operationQueue.clear(); +} + +/*! + Stops the current operation that is being processed and clears all + waiting operations. +*/ + +void TQNetworkProtocol::stop() +{ + TQNetworkOperation *op = d->opInProgress; + clearOperationQueue(); + if ( op ) { + op->setState( StStopped ); + op->setProtocolDetail( tr( "Operation stopped by the user" ) ); + emit finished( op ); + setUrl( 0 ); + op->free(); + } +} + +/*! + Because it's sometimes hard to take care of removing network + protocol instances, TQNetworkProtocol provides an auto-delete + mechanism. If you set \a b to TRUE, the network protocol instance + is removed after it has been inactive for \a i milliseconds (i.e. + \a i milliseconds after the last operation has been processed). + If you set \a b to FALSE the auto-delete mechanism is switched + off. + + If you switch on auto-delete, the TQNetworkProtocol also deletes + its TQUrlOperator. +*/ + +void TQNetworkProtocol::setAutoDelete( bool b, int i ) +{ + d->autoDelete = b; + d->removeInterval = i; +} + +/*! + Returns TRUE if auto-deleting is enabled; otherwise returns FALSE. + + \sa TQNetworkProtocol::setAutoDelete() +*/ + +bool TQNetworkProtocol::autoDelete() const +{ + return d->autoDelete; +} + +/*! + \internal +*/ + +void TQNetworkProtocol::removeMe() +{ + if ( d->autoDelete ) { +#ifdef TQNETWORKPROTOCOL_DEBUG + qDebug( "TQNetworkOperation: autodelete of TQNetworkProtocol %p", this ); +#endif + delete d->url; // destructor deletes the network protocol + } +} + +void TQNetworkProtocol::emitNewChildren( const TQUrlInfo &i, TQNetworkOperation *op ) +{ + TQValueList lst; + lst << i; + emit newChildren( lst, op ); +} + +class TQNetworkOperationPrivate +{ +public: + TQNetworkProtocol::Operation operation; + TQNetworkProtocol::State state; + TQMap args; + TQMap rawArgs; + TQString protocolDetail; + int errorCode; + TQTimer *deleteTimer; +}; + +/*! + \class TQNetworkOperation + + \brief The TQNetworkOperation class provides common operations for network protocols. +\if defined(commercial) + It is part of the TQt Enterprise Edition. +\endif + + \module network + \ingroup io + + An object is created to describe the operation and the current + state for each operation that a network protocol should process. + + For a detailed description of the TQt Network Architecture and how + to implement and use network protocols in TQt, see the \link + network.html TQt Network Documentation\endlink. + + \sa TQNetworkProtocol +*/ + +/*! + Constructs a network operation object. \a operation is the type of + the operation, and \a arg0, \a arg1 and \a arg2 are the first + three arguments of the operation. The state is initialized to + TQNetworkProtocol::StWaiting. + + \sa TQNetworkProtocol::Operation TQNetworkProtocol::State +*/ + +TQNetworkOperation::TQNetworkOperation( TQNetworkProtocol::Operation operation, + const TQString &arg0, const TQString &arg1, + const TQString &arg2 ) +{ + d = new TQNetworkOperationPrivate; + d->deleteTimer = new TQTimer( this ); + connect( d->deleteTimer, TQT_SIGNAL( timeout() ), + this, TQT_SLOT( deleteMe() ) ); + d->operation = operation; + d->state = TQNetworkProtocol::StWaiting; + d->args[ 0 ] = arg0; + d->args[ 1 ] = arg1; + d->args[ 2 ] = arg2; + d->rawArgs[ 0 ] = TQByteArray( 0 ); + d->rawArgs[ 1 ] = TQByteArray( 0 ); + d->rawArgs[ 2 ] = TQByteArray( 0 ); + d->protocolDetail = TQString::null; + d->errorCode = (int)TQNetworkProtocol::NoError; +} + +/*! + Constructs a network operation object. \a operation is the type of + the operation, and \a arg0, \a arg1 and \a arg2 are the first + three raw data arguments of the operation. The state is + initialized to TQNetworkProtocol::StWaiting. + + \sa TQNetworkProtocol::Operation TQNetworkProtocol::State +*/ + +TQNetworkOperation::TQNetworkOperation( TQNetworkProtocol::Operation operation, + const TQByteArray &arg0, const TQByteArray &arg1, + const TQByteArray &arg2 ) +{ + d = new TQNetworkOperationPrivate; + d->deleteTimer = new TQTimer( this ); + connect( d->deleteTimer, TQT_SIGNAL( timeout() ), + this, TQT_SLOT( deleteMe() ) ); + d->operation = operation; + d->state = TQNetworkProtocol::StWaiting; + d->args[ 0 ] = TQString::null; + d->args[ 1 ] = TQString::null; + d->args[ 2 ] = TQString::null; + d->rawArgs[ 0 ] = arg0; + d->rawArgs[ 1 ] = arg1; + d->rawArgs[ 2 ] = arg2; + d->protocolDetail = TQString::null; + d->errorCode = (int)TQNetworkProtocol::NoError; +} + +/*! + Destructor. +*/ + +TQNetworkOperation::~TQNetworkOperation() +{ + delete d; +} + +/*! + Sets the \a state of the operation object. This should be done by + the network protocol during processing; at the end it should be + set to TQNetworkProtocol::StDone or TQNetworkProtocol::StFailed, + depending on success or failure. + + \sa TQNetworkProtocol::State +*/ + +void TQNetworkOperation::setState( TQNetworkProtocol::State state ) +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + d->state = state; +} + +/*! + If the operation failed, the error message can be specified as \a + detail. +*/ + +void TQNetworkOperation::setProtocolDetail( const TQString &detail ) +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + d->protocolDetail = detail; +} + +/*! + Sets the error code to \a ec. + + If the operation failed, the protocol should set an error code to + describe the error in more detail. If possible, one of the error + codes defined in TQNetworkProtocol should be used. + + \sa setProtocolDetail() TQNetworkProtocol::Error +*/ + +void TQNetworkOperation::setErrorCode( int ec ) +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + d->errorCode = ec; +} + +/*! + Sets the network operation's \a{num}-th argument to \a arg. +*/ + +void TQNetworkOperation::setArg( int num, const TQString &arg ) +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + d->args[ num ] = arg; +} + +/*! + Sets the network operation's \a{num}-th raw data argument to \a arg. +*/ + +void TQNetworkOperation::setRawArg( int num, const TQByteArray &arg ) +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + d->rawArgs[ num ] = arg; +} + +/*! + Returns the type of the operation. +*/ + +TQNetworkProtocol::Operation TQNetworkOperation::operation() const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->operation; +} + +/*! + Returns the state of the operation. You can determine whether an + operation is still waiting to be processed, is being processed, + has been processed successfully, or failed. +*/ + +TQNetworkProtocol::State TQNetworkOperation::state() const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->state; +} + +/*! + Returns the operation's \a{num}-th argument. If this argument was + not already set, an empty string is returned. +*/ + +TQString TQNetworkOperation::arg( int num ) const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->args[ num ]; +} + +/*! + Returns the operation's \a{num}-th raw data argument. If this + argument was not already set, an empty bytearray is returned. +*/ + +TQByteArray TQNetworkOperation::rawArg( int num ) const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->rawArgs[ num ]; +} + +/*! + Returns a detailed error message for the last error. This must + have been set using setProtocolDetail(). +*/ + +TQString TQNetworkOperation::protocolDetail() const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->protocolDetail; +} + +/*! + Returns the error code for the last error that occurred. +*/ + +int TQNetworkOperation::errorCode() const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->errorCode; +} + +/*! + \internal +*/ + +TQByteArray& TQNetworkOperation::raw( int num ) const +{ + if ( d->deleteTimer->isActive() ) { + d->deleteTimer->stop(); + d->deleteTimer->start( NETWORK_OP_DELAY ); + } + return d->rawArgs[ num ]; +} + +/*! + Sets this object to delete itself when it hasn't been used for one + second. + + Because TQNetworkOperation pointers are passed around a lot the + TQNetworkProtocol generally does not have enough knowledge to + delete these at the correct time. If a TQNetworkProtocol doesn't + need an operation any more it will call this function instead. + + Note: you should never need to call the method yourself. +*/ + +void TQNetworkOperation::free() +{ + d->deleteTimer->start( NETWORK_OP_DELAY ); +} + +/*! + \internal + Internal slot for auto-deletion. +*/ + +void TQNetworkOperation::deleteMe() +{ + delete this; +} + +#endif -- cgit v1.2.1