path: root/tqtinterface/qt4/src/kernel/tqregion.cpp

/****************************************************************************
**
** Implementation of TQRegion class
**
** Created : 950726
**
** Copyright (C) 2010 Timothy Pearson and (C) 1992-2008 Trolltech ASA.
**
** This file is part of the kernel module of the TQt GUI Toolkit.
**
** This file may be used under the terms of the GNU General
** Public License versions 2.0 or 3.0 as published by the Free
** Software Foundation and appearing in the files LICENSE.GPL2
** and LICENSE.GPL3 included in the packaging of this file.
** Alternatively you may (at your option) use any later version
** of the GNU General Public License if such license has been
** publicly approved by Trolltech ASA (or its successors, if any)
** and the KDE Free TQt Foundation.
**
** Please review the following information to ensure GNU General
** Public Licensing requirements will be met:
** http://trolltech.com/products/qt/licenses/licensing/opensource/.
** If you are unsure which license is appropriate for your use, please
** review the following information:
** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
** or contact the sales department at sales@trolltech.com.
**
** This file may be used under the terms of the Q Public License as
** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
** included in the packaging of this file.  Licensees holding valid TQt
** Commercial licenses may use this file in accordance with the TQt
** Commercial License Agreement provided with the Software.
**
** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
** herein.
**
**********************************************************************/

#include "tqregion.h"
#include "tqpointarray.h"
#include "tqbuffer.h"
#include "tqdatastream.h"

#ifdef USE_QT4

/*!
    Use the constructor tha takes a Qt::FillRule as the second
    argument instead.
*/
TQRegion::TQRegion(const QPolygon &pa, bool winding)
{
    new (this) QRegion(pa, winding ? Qt::WindingFill : Qt::OddEvenFill);
}

#else // USE_QT4

// BEING REVISED: paul
/*!
    \class TQRegion tqregion.h
    \brief The TQRegion class specifies a clip region for a painter.

    \ingroup images
    \ingroup graphics

    TQRegion is used with TQPainter::setClipRegion() to limit the paint
    area to what needs to be painted. There is also a
    TQWidget::tqrepaint() that takes a TQRegion parameter. TQRegion is the
    best tool for reducing flicker.

    A region can be created from a rectangle, an ellipse, a polygon or
    a bitmap. Complex regions may be created by combining simple
    regions using unite(), intersect(), subtract() or eor() (exclusive
    or). You can move a region using translate().

    You can test whether a region isNull(), isEmpty() or if it
    tqcontains() a TQPoint or TQRect. The bounding rectangle is given by
    boundingRect().

    The function rects() gives a decomposition of the region into
    rectangles.

    Example of using complex regions:
    \code
	void MyWidget::paintEvent( TQPaintEvent * )
	{
	    TQPainter p;                         // our painter
	    TQRegion r1( TQRect(100,100,200,80),  // r1 = elliptic region
			TQRegion::Ellipse );
	    TQRegion r2( TQRect(100,120,90,30) ); // r2 = rectangular region
	    TQRegion r3 = r1.intersect( r2 );    // r3 = intersection
	    p.begin( this );                    // start painting widget
	    p.setClipRegion( r3 );              // set clip region
	    ...                                 // paint clipped graphics
	    p.end();                            // painting done
	}
    \endcode

    TQRegion is an \link shclass.html implicitly shared\endlink class.

    \warning Due to window system limitations, the whole coordinate
    space for a region is limited to the points between -32767 and
    32767 on Mac OS X and Windows 95/98/ME.

    \sa TQPainter::setClipRegion(), TQPainter::setClipRect()
*/


/*!
    \enum TQRegion::RegionType

    Specifies the tqshape of the region to be created.

    \value Rectangle  the region covers the entire rectangle.
    \value Ellipse  the region is an ellipse inside the rectangle.
*/

/*!
    \fn Region  TQRegion::handle() const

    Returns the region's handle.
*/

/*****************************************************************************
  TQRegion member functions
 *****************************************************************************/

/*!
    Constructs a rectangular or elliptic region.

    If \a t is \c Rectangle, the region is the filled rectangle (\a x,
    \a y, \a w, \a h). If \a t is \c Ellipse, the region is the filled
    ellipse with center at (\a x + \a w / 2, \a y + \a h / 2) and size
    (\a w ,\a h ).
*/
TQRegion::TQRegion( int x, int y, int w, int h, RegionType t )
{
    TQRegion tmp(TQRect(x,y,w,h),t);
    tmp.data->ref();
    data = tmp.data;
}

/*!
    Detaches from shared region data to make sure that this region is
    the only one referring to the data.

    \sa copy(), \link shclass.html shared classes\endlink
*/

void TQRegion::detach()
{
    if ( data->count != 1 )
	*this = copy();
}

#ifndef TQT_NO_DATASTREAM
/*
    Executes region commands in the internal buffer and rebuilds the
    original region.

    We do this when we read a region from the data stream.

    If \a ver is non-0, uses the format version \a ver on reading the
    byte array.
*/

void TQRegion::exec( const TQByteArray &buffer, int ver )
{
    TQBuffer buf( buffer );
    TQDataStream s( &buf );
    if ( ver )
	s.setVersion( ver );
    buf.open( IO_ReadOnly );
    TQRegion rgn;
#if defined(TQT_CHECK_STATE)
    int test_cnt = 0;
#endif
    while ( !s.eof() ) {
	TQ_INT32 id;
	if ( s.version() == 1 ) {
	    int id_int;
	    s >> id_int;
	    id = id_int;
	} else {
	    s >> id;
	}
#if defined(TQT_CHECK_STATE)
	if ( test_cnt > 0 && id != TQRGN_TRANSLATE )
	    qWarning( "TQRegion::exec: Internal error" );
	test_cnt++;
#endif
	if ( id == TQRGN_SETRECT || id == TQRGN_SETELLIPSE ) {
	    TQRect r;
	    s >> r;
	    rgn = TQRegion( r, id == TQRGN_SETRECT ? Rectangle : Ellipse );
	} else if ( id == TQRGN_SETPTARRAY_ALT || id == TQRGN_SETPTARRAY_WIND ) {
	    TQPointArray a;
	    s >> a;
	    rgn = TQRegion( a, id == TQRGN_SETPTARRAY_WIND );
	} else if ( id == TQRGN_TRANSLATE ) {
	    TQPoint p;
	    s >> p;
	    rgn.translate( p.x(), p.y() );
	} else if ( id >= TQRGN_OR && id <= TQRGN_XOR ) {
	    TQByteArray bop1, bop2;
	    TQRegion r1, r2;
	    s >> bop1;	r1.exec( bop1 );
	    s >> bop2;	r2.exec( bop2 );
	    switch ( id ) {
		case TQRGN_OR:
		    rgn = r1.unite( r2 );
		    break;
		case TQRGN_AND:
		    rgn = r1.intersect( r2 );
		    break;
		case TQRGN_SUB:
		    rgn = r1.subtract( r2 );
		    break;
		case TQRGN_XOR:
		    rgn = r1.eor( r2 );
		    break;
	    }
	} else if ( id == TQRGN_RECTS ) {
	    // (This is the only form used in TQt 2.0)
	    TQ_UINT32 n;
	    s >> n;
	    TQRect r;
	    for ( int i=0; i<(int)n; i++ ) {
		s >> r;
		rgn = rgn.unite( TQRegion(r) );
	    }
	}
    }
    buf.close();
    *this = rgn;
}


/*****************************************************************************
  TQRegion stream functions
 *****************************************************************************/

/*!
    \relates TQRegion

    Writes the region \a r to the stream \a s and returns a reference
    to the stream.

    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
*/

TQDataStream &operator<<( TQDataStream &s, const TQRegion &r )
{
    TQMemArray<TQRect> a = r.rects();
    if ( a.isEmpty() ) {
	s << (TQ_UINT32)0;
    } else {
	if ( s.version() == 1 ) {
	    int i;
	    for ( i=(int)a.size()-1; i>0; i-- ) {
		s << (TQ_UINT32)(12+i*24);
		s << (int)TQRGN_OR;
	    }
	    for ( i=0; i<(int)a.size(); i++ ) {
		s << (TQ_UINT32)(4+8) << (int)TQRGN_SETRECT << a[i];
	    }
	}
	else {
	    s << (TQ_UINT32)(4+4+16*a.size()); // 16: storage size of TQRect
	    s << (TQ_INT32)TQRGN_RECTS;
	    s << (TQ_UINT32)a.size();
	    for ( int i=0; i<(int)a.size(); i++ )
		s << a[i];
	}
    }
    return s;
}

/*!
    \relates TQRegion

    Reads a region from the stream \a s into \a r and returns a
    reference to the stream.

    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
*/

TQDataStream &operator>>( TQDataStream &s, TQRegion &r )
{
    TQByteArray b;
    s >> b;
    r.exec( b, s.version() );
    return s;
}
#endif //TQT_NO_DATASTREAM

// These are not inline - they can be implemented better on some platforms
//  (eg. Windows at least provides 3-variable operations).  For now, simple.


/*!
    Applies the unite() function to this region and \a r. \c r1|r2 is
    equivalent to \c r1.unite(r2)

    \sa unite(), operator+()
*/
const TQRegion TQRegion::operator|( const TQRegion &r ) const
    { return unite(r); }

/*!
    Applies the unite() function to this region and \a r. \c r1+r2 is
    equivalent to \c r1.unite(r2)

    \sa unite(), operator|()
*/
const TQRegion TQRegion::operator+( const TQRegion &r ) const
    { return unite(r); }

/*!
    Applies the intersect() function to this region and \a r. \c r1&r2
    is equivalent to \c r1.intersect(r2)

    \sa intersect()
*/
const TQRegion TQRegion::operator&( const TQRegion &r ) const
    { return intersect(r); }

/*!
    Applies the subtract() function to this region and \a r. \c r1-r2
    is equivalent to \c r1.subtract(r2)

    \sa subtract()
*/
const TQRegion TQRegion::operator-( const TQRegion &r ) const
    { return subtract(r); }

/*!
    Applies the eor() function to this region and \a r. \c r1^r2 is
    equivalent to \c r1.eor(r2)

    \sa eor()
*/
const TQRegion TQRegion::operator^( const TQRegion &r ) const
    { return eor(r); }

/*!
    Applies the unite() function to this region and \a r and assigns
    the result to this region. \c r1|=r2 is equivalent to \c
    r1=r1.unite(r2)

    \sa unite()
*/
TQRegion& TQRegion::operator|=( const TQRegion &r )
    { return *this = *this | r; }

/*!
    Applies the unite() function to this region and \a r and assigns
    the result to this region. \c r1+=r2 is equivalent to \c
    r1=r1.unite(r2)

    \sa intersect()
*/
TQRegion& TQRegion::operator+=( const TQRegion &r )
    { return *this = *this + r; }

/*!
    Applies the intersect() function to this region and \a r and
    assigns the result to this region. \c r1&=r2 is equivalent to \c
    r1=r1.intersect(r2)

    \sa intersect()
*/
TQRegion& TQRegion::operator&=( const TQRegion &r )
    { return *this = *this & r; }

/*!
    Applies the subtract() function to this region and \a r and
    assigns the result to this region. \c r1-=r2 is equivalent to \c
    r1=r1.subtract(r2)

    \sa subtract()
*/
TQRegion& TQRegion::operator-=( const TQRegion &r )
    { return *this = *this - r; }

/*!
    Applies the eor() function to this region and \a r and
    assigns the result to this region. \c r1^=r2 is equivalent to \c
    r1=r1.eor(r2)

    \sa eor()
*/
TQRegion& TQRegion::operator^=( const TQRegion &r )
    { return *this = *this ^ r; }


#endif // USE_QT4