diff options
Diffstat (limited to 'debian/uncrustify-trinity/uncrustify-trinity-0.76.0/etc/sun.cfg')
| -rw-r--r-- | debian/uncrustify-trinity/uncrustify-trinity-0.76.0/etc/sun.cfg | 1803 |
1 files changed, 1803 insertions, 0 deletions
diff --git a/debian/uncrustify-trinity/uncrustify-trinity-0.76.0/etc/sun.cfg b/debian/uncrustify-trinity/uncrustify-trinity-0.76.0/etc/sun.cfg new file mode 100644 index 00000000..b1c16263 --- /dev/null +++ b/debian/uncrustify-trinity/uncrustify-trinity-0.76.0/etc/sun.cfg @@ -0,0 +1,1803 @@ +# +# Sun C/C++/Java +# https://www.cis.upenn.edu/~lee/06cse480/data/cstyle.ms.pdf +# http://www.oracle.com/technetwork/java/codeconventions-150003.pdf +# + +# The type of line endings +newlines = auto # auto/lf/crlf/cr + +# The original size of tabs in the input +input_tab_size = 8 # number + +# The size of tabs in the output (only used if align_with_tabs=true) +output_tab_size = 8 # number + +# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn) +string_escape_char = 92 # number + +# Alternate string escape char for Pawn. Only works right before the quote char. +string_escape_char2 = 0 # number + +# Replace tab characters found in string literals with the escape sequence \t instead. +string_replace_tab_chars = true # false/true + +# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'. +# If true (default), 'assert(x<0 && y>=3)' will be broken. +# Improvements to template detection may make this option obsolete. +tok_split_gte = false # false/true + +# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file. +disable_processing_cmt = "" # string + +# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file. +enable_processing_cmt = "" # string + +# Enable parsing of digraphs. Default=false +enable_digraphs = false # false/true + +# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8 +utf8_byte = false # false/true + +# Force the output encoding to UTF-8 +utf8_force = false # false/true + +# +# Indenting +# + +# The number of columns to indent per level. +# Usually 2, 3, 4, or 8. +indent_columns = 4 # number + +# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents. +# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level +indent_continue = -4 # number + +# How to use tabs when indenting code +# 0=spaces only +# 1=indent with tabs to brace level, align with spaces +# 2=indent and align with tabs, using spaces when not on a tabstop +indent_with_tabs = 2 # number + +# Comments that are not a brace level are indented with tabs on a tabstop. +# Requires indent_with_tabs=2. If false, will use spaces. +indent_cmt_with_tabs = false # false/true + +# Whether to indent strings broken by '\' so that they line up +indent_align_string = false # false/true + +# The number of spaces to indent multi-line XML strings. +# Requires indent_align_string=True +indent_xml_string = 2 # number + +# Spaces to indent '{' from level +indent_brace = 0 # number + +# Whether braces are indented to the body level +indent_braces = false # false/true + +# Disabled indenting function braces if indent_braces is true +indent_braces_no_func = false # false/true + +# Disabled indenting class braces if indent_braces is true +indent_braces_no_class = false # false/true + +# Disabled indenting struct braces if indent_braces is true +indent_braces_no_struct = false # false/true + +# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc. +indent_brace_parent = false # false/true + +# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace. +indent_paren_open_brace = false # false/true + +# Whether the 'namespace' body is indented +indent_namespace = false # false/true + +# Only indent one namespace and no sub-namespaces. +# Requires indent_namespace=true. +indent_namespace_single_indent = false # false/true + +# The number of spaces to indent a namespace block +indent_namespace_level = 0 # number + +# If the body of the namespace is longer than this number, it won't be indented. +# Requires indent_namespace=true. Default=0 (no limit) +indent_namespace_limit = 0 # number + +# Whether the 'extern "C"' body is indented +indent_extern = false # false/true + +# Whether the 'class' body is indented +indent_class = true # false/true + +# Whether to indent the stuff after a leading base class colon +indent_class_colon = false # false/true + +# Indent based on a class colon instead of the stuff after the colon. +# Requires indent_class_colon=true. Default=false +indent_class_on_colon = false # false/true + +# Whether to indent the stuff after a leading class initializer colon +indent_constr_colon = false # false/true + +# Virtual indent from the ':' for member initializers. Default is 2 +indent_ctor_init_leading = 0 # number + +# Additional indenting for constructor initializer list +indent_ctor_init = 0 # number + +# False=treat 'else\nif' as 'else if' for indenting purposes +# True=indent the 'if' one level +indent_else_if = false # false/true + +# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute +indent_var_def_blk = 0 # number + +# Indent continued variable declarations instead of aligning. +indent_var_def_cont = true # false/true + +# How to indent continued shift expressions ('<<' and '>>'). +# Set align_left_shift=false when using this. +# 0: Align shift operators instead of indenting them (default) +# 1: Indent by one level +# -1: Preserve original indentation +indent_shift = 0 # number + +# True: force indentation of function definition to start in column 1 +# False: use the default behavior +indent_func_def_force_col1 = false # false/true + +# True: indent continued function call parameters one indent level +# False: align parameters under the open paren +indent_func_call_param = true # false/true + +# Same as indent_func_call_param, but for function defs +indent_func_def_param = true # false/true + +# Same as indent_func_call_param, but for function protos +indent_func_proto_param = true # false/true + +# Same as indent_func_call_param, but for class declarations +indent_func_class_param = true # false/true + +# Same as indent_func_call_param, but for class variable constructors +indent_func_ctor_var_param = true # false/true + +# Same as indent_func_call_param, but for templates +indent_template_param = true # false/true + +# Double the indent for indent_func_xxx_param options +indent_func_param_double = false # false/true + +# Indentation column for standalone 'const' function decl/proto qualifier +indent_func_const = 0 # number + +# Indentation column for standalone 'throw' function decl/proto qualifier +indent_func_throw = 0 # number + +# The number of spaces to indent a continued '->' or '.' +# Usually set to 0, 1, or indent_columns. +indent_member = 4 # number + +# Spaces to indent single line ('//') comments on lines before code +indent_single_line_comments_before = 0 # number + +# If set, will indent trailing single line ('//') comments relative +# to the code instead of trying to keep the same absolute column +indent_relative_single_line_comments = false # false/true + +# Spaces to indent 'case' from 'switch' +# Usually 0 or indent_columns. +indent_switch_case = 0 # number + +# Spaces to shift the 'case' line, without affecting any other lines +# Usually 0. +indent_case_shift = 0 # number + +# Spaces to indent '{' from 'case'. +# By default, the brace will appear under the 'c' in case. +# Usually set to 0 or indent_columns. +indent_case_brace = 0 # number + +# Whether to indent comments found in first column +indent_col1_comment = false # false/true + +# How to indent goto labels +# >0: absolute column where 1 is the leftmost column +# <=0: subtract from brace indent +indent_label = -4 # number + +# Same as indent_label, but for access specifiers that are followed by a colon +indent_access_spec = -4 # number + +# Indent the code after an access specifier by one level. +# If set, this option forces 'indent_access_spec=0' +indent_access_spec_body = false # false/true + +# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended) +indent_paren_nl = false # false/true + +# Controls the indent of a close paren after a newline. +# 0: Indent to body level +# 1: Align under the open paren +# 2: Indent to the brace level +indent_paren_close = 0 # number + +# Controls the indent of a comma when inside a paren.If 1, aligns under the open paren +indent_comma_paren = 0 # number + +# Controls the indent of a BOOL operator when inside a paren.If 1, aligns under the open paren +indent_bool_paren = 0 # number + +# If 'indent_bool_paren' is 1, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones +indent_first_bool_expr = false # false/true + +# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended) +indent_square_nl = false # false/true + +# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies +indent_preserve_sql = false # false/true + +# Align continued statements at the '='. Default=True +# If FALSE or the '=' is followed by a newline, the next line is indent one tab. +indent_align_assign = false # false/true + +# If true, the indentation of the chunks after a '=' sequence will be set at +# LHS token indentation column before '='. +indent_off_after_assign = false # true/false + +# Indent OC blocks at brace level instead of usual rules. +indent_oc_block = false # false/true + +# Indent OC blocks in a message relative to the parameter name. +# 0=use indent_oc_block rules, 1+=spaces to indent +indent_oc_block_msg = 0 # number + +# Minimum indent for subsequent parameters +indent_oc_msg_colon = 0 # number + +# If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary). +# Default is true. +indent_oc_msg_prioritize_first_colon = true # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level). +indent_oc_block_msg_xcode_style = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword. +indent_oc_block_msg_from_keyword = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon. +indent_oc_block_msg_from_colon = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is. +indent_oc_block_msg_from_caret = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is. +indent_oc_block_msg_from_brace = false # false/true + +# When identing after virtual brace open and newline add further spaces to reach this min. indent. +indent_min_vbrace_open = 0 # number + +# TRUE: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop. +indent_vbrace_open_on_tabstop = false # false/true + +# +# Spacing options +# + +# Add or remove space around arithmetic operator '+', '-', '/', '*', etc +# also '>>>' '<<' '>>' '%' '|' +sp_arith = force # ignore/add/remove/force + +# Add or remove space around assignment operator '=', '+=', etc +sp_assign = force # ignore/add/remove/force + +# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign +sp_cpp_lambda_assign = force # ignore/add/remove/force + +# Add or remove space around assignment operator '=' in a prototype +sp_assign_default = force # ignore/add/remove/force + +# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign. +sp_before_assign = force # ignore/add/remove/force + +# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign. +sp_after_assign = force # ignore/add/remove/force + +# Add or remove space in 'NS_ENUM (' +sp_enum_paren = force # ignore/add/remove/force + +# Add or remove space around assignment '=' in enum +sp_enum_assign = force # ignore/add/remove/force + +# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign. +sp_enum_before_assign = force # ignore/add/remove/force + +# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign. +sp_enum_after_assign = force # ignore/add/remove/force + +# Add or remove space around preprocessor '##' concatenation operator. Default=Add +sp_pp_concat = force # ignore/add/remove/force + +# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. +sp_pp_stringify = force # ignore/add/remove/force + +# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'. +sp_before_pp_stringify = force # ignore/add/remove/force + +# Add or remove space around boolean operators '&&' and '||' +sp_bool = force # ignore/add/remove/force + +# Add or remove space around compare operator '<', '>', '==', etc +sp_compare = force # ignore/add/remove/force + +# Add or remove space inside '(' and ')' +sp_inside_paren = remove # ignore/add/remove/force + +# Add or remove space between nested parens: '((' vs ') )' +sp_paren_paren = remove # ignore/add/remove/force + +# Add or remove space between back-to-back parens: ')(' vs ') (' +sp_cparen_oparen = remove # ignore/add/remove/force + +# Whether to balance spaces inside nested parens +sp_balance_nested_parens = false # false/true + +# Add or remove space between ')' and '{' +sp_paren_brace = force # ignore/add/remove/force + +# Add or remove space before pointer star '*' +sp_before_ptr_star = force # ignore/add/remove/force + +# Add or remove space before pointer star '*' that isn't followed by a variable name +# If set to 'ignore', sp_before_ptr_star is used instead. +sp_before_unnamed_ptr_star = force # ignore/add/remove/force + +# Add or remove space between pointer stars '*' +sp_between_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a word. +sp_after_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a qualifier. +sp_after_ptr_star_qualifier = force # ignore/add/remove/force + +# Add or remove space after a pointer star '*', if followed by a func proto/def. +sp_after_ptr_star_func = remove # ignore/add/remove/force + +# Add or remove space between the pointer star '*' and the name of the variable +# in a function pointer definition. +sp_ptr_star_func_var = remove # ignore/add/remove/force/not_defined + +# Add or remove space after a pointer star '*', if followed by an open paren (function types). +sp_ptr_star_paren = remove # ignore/add/remove/force + +# Add or remove space before a pointer star '*', if followed by a func proto/def. +sp_before_ptr_star_func = force # ignore/add/remove/force + +# Add or remove space before a reference sign '&' +sp_before_byref = force # ignore/add/remove/force + +# Add or remove space before a reference sign '&' that isn't followed by a variable name +# If set to 'ignore', sp_before_byref is used instead. +sp_before_unnamed_byref = force # ignore/add/remove/force + +# Add or remove space after reference sign '&', if followed by a word. +sp_after_byref = remove # ignore/add/remove/force + +# Add or remove space after a reference sign '&', if followed by a func proto/def. +sp_after_byref_func = remove # ignore/add/remove/force + +# Add or remove space before a reference sign '&', if followed by a func proto/def. +sp_before_byref_func = force # ignore/add/remove/force + +# Add or remove space between type and word. Default=Force +sp_after_type = force # ignore/add/remove/force + +# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('. +sp_before_template_paren = remove # ignore/add/remove/force + +# Add or remove space in 'template <' vs 'template<'. +# If set to ignore, sp_before_angle is used. +sp_template_angle = remove # ignore/add/remove/force + +# Add or remove space before '<>' +sp_before_angle = remove # ignore/add/remove/force + +# Add or remove space inside '<' and '>' +sp_inside_angle = remove # ignore/add/remove/force + +# Add or remove space after '<>' +sp_after_angle = force # ignore/add/remove/force + +# Add or remove space between '<>' and '(' as found in 'new List<byte>();' +sp_angle_paren = remove # ignore/add/remove/force + +# Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...' +sp_angle_word = force # ignore/add/remove/force + +# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add +sp_angle_shift = force # ignore/add/remove/force + +# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False +# sp_angle_shift cannot remove the space without this option. +sp_permit_cpp11_shift = false # false/true + +# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc. +sp_before_sparen = force # ignore/add/remove/force + +# Add or remove space inside if-condition '(' and ')' +sp_inside_sparen = remove # ignore/add/remove/force + +# Add or remove space before if-condition ')'. Overrides sp_inside_sparen. +sp_inside_sparen_close = remove # ignore/add/remove/force + +# Add or remove space after if-condition '('. Overrides sp_inside_sparen. +sp_inside_sparen_open = remove # ignore/add/remove/force + +# Add or remove space inside for-loop '(' and ')' +sp_inside_for = remove # ignore/add/remove/force + +# Add or remove space before for-loop ')'. Overrides sp_inside_for. +sp_inside_for_close = remove # ignore/add/remove/force + +# Add or remove space after for-loop '('. Overrides sp_inside_for. +sp_inside_for_open = remove # ignore/add/remove/force + +# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc. +sp_after_sparen = force # ignore/add/remove/force + +# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc. +sp_sparen_brace = force # ignore/add/remove/force + +# Add or remove space between 'invariant' and '(' in the D language. +sp_invariant_paren = remove # ignore/add/remove/force + +# Add or remove space after the ')' in 'invariant (C) c' in the D language. +sp_after_invariant_paren = force # ignore/add/remove/force + +# Add or remove space before empty statement ';' on 'if', 'for' and 'while' +sp_special_semi = remove # ignore/add/remove/force + +# Add or remove space before ';'. Default=Remove +sp_before_semi = remove # ignore/add/remove/force + +# Add or remove space before ';' in non-empty 'for' statements +sp_before_semi_for = remove # ignore/add/remove/force + +# Add or remove space before a semicolon of an empty left part of a for statement. +sp_before_semi_for_empty = remove # ignore/add/remove/force + +# Add or remove space between the semicolons of an empty middle part of a for statement. +sp_between_semi_for_empty = remove # ignore/add/remove/force/not_defined + +# Add or remove space after ';', except when followed by a comment. Default=Add +sp_after_semi = force # ignore/add/remove/force + +# Add or remove space after ';' in non-empty 'for' statements. Default=Force +sp_after_semi_for = force # ignore/add/remove/force + +# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ). +sp_after_semi_for_empty = remove # ignore/add/remove/force + +# Add or remove space before '[' (except '[]') +sp_before_square = remove # ignore/add/remove/force + +# Add or remove space before '[]' +sp_before_squares = remove # ignore/add/remove/force + +# Add or remove space inside a non-empty '[' and ']' +sp_inside_square = remove # ignore/add/remove/force + +# Add or remove space after ',' +sp_after_comma = force # ignore/add/remove/force + +# Add or remove space before ',' +sp_before_comma = remove # ignore/add/remove/force + +# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]' +sp_after_mdatype_commas = remove # ignore/add/remove/force + +# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]' +sp_before_mdatype_commas = remove # ignore/add/remove/force + +# Add or remove space between ',' in multidimensional array type 'int[,,]' +sp_between_mdatype_commas = remove # ignore/add/remove/force + +# Add or remove space between an open paren and comma: '(,' vs '( ,' +sp_paren_comma = force # ignore/add/remove/force + +# Add or remove space before the variadic '...' when preceded by a non-punctuator +sp_before_ellipsis = force # ignore/add/remove/force + +# Add or remove space after class ':' +sp_after_class_colon = force # ignore/add/remove/force + +# Add or remove space before class ':' +sp_before_class_colon = remove # ignore/add/remove/force + +# Add or remove space after class constructor ':' +sp_after_constr_colon = force # ignore/add/remove/force + +# Add or remove space before class constructor ':' +sp_before_constr_colon = remove # ignore/add/remove/force + +# Add or remove space before case ':'. Default=Remove +sp_before_case_colon = remove # ignore/add/remove/force + +# Add or remove space between 'operator' and operator sign +sp_after_operator = force # ignore/add/remove/force + +# Add or remove space between the operator symbol and the open paren, as in 'operator ++(' +sp_after_operator_sym = remove # ignore/add/remove/force + +# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a' +sp_after_cast = remove # ignore/add/remove/force + +# Add or remove spaces inside cast parens +sp_inside_paren_cast = remove # ignore/add/remove/force + +# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)' +sp_cpp_cast_paren = remove # ignore/add/remove/force + +# Add or remove space between 'sizeof' and '(' +sp_sizeof_paren = force # ignore/add/remove/force + +# Add or remove space after the tag keyword (Pawn) +sp_after_tag = force # ignore/add/remove/force + +# Add or remove space inside enum '{' and '}' +sp_inside_braces_enum = force # ignore/add/remove/force + +# Add or remove space inside struct/union '{' and '}' +sp_inside_braces_struct = force # ignore/add/remove/force + +# Add or remove space inside '{' and '}' +sp_inside_braces = force # ignore/add/remove/force + +# Add or remove space inside '{}' +sp_inside_braces_empty = remove # ignore/add/remove/force + +# Add or remove space between return type and function name +# A minimum of 1 is forced except for pointer return types. +sp_type_func = remove # ignore/add/remove/force + +# Add or remove space between function name and '(' on function declaration +sp_func_proto_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '(' on function definition +sp_func_def_paren = remove # ignore/add/remove/force + +# Add or remove space inside empty function '()' +sp_inside_fparens = remove # ignore/add/remove/force + +# Add or remove space inside function '(' and ')' +sp_inside_fparen = remove # ignore/add/remove/force + +# Add or remove space inside the first parens in the function type: 'void (*x)(...)' +sp_inside_tparen = remove # ignore/add/remove/force + +# Add or remove between the parens in the function type: 'void (*x)(...)' +sp_after_tparen_close = remove # ignore/add/remove/force + +# Add or remove space between ']' and '(' when part of a function call. +sp_square_fparen = remove # ignore/add/remove/force + +# Add or remove space between ')' and '{' of function +sp_fparen_brace = force # ignore/add/remove/force + +# Java: Add or remove space between ')' and '{{' of double brace initializer. +sp_fparen_dbrace = force # ignore/add/remove/force + +# Add or remove space between function name and '(' on function calls +sp_func_call_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '()' on function calls without parameters. +# If set to 'ignore' (the default), sp_func_call_paren is used. +sp_func_call_paren_empty = remove # ignore/add/remove/force + +# Add or remove space between the user function name and '(' on function calls +# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file. +sp_func_call_user_paren = remove # ignore/add/remove/force + +# Add or remove space between a constructor/destructor and the open paren +sp_func_class_paren = remove # ignore/add/remove/force + +# Add or remove space between 'return' and '(' +sp_return_paren = force # ignore/add/remove/force + +# Add or remove space between '__attribute__' and '(' +sp_attribute_paren = force # ignore/add/remove/force + +# Add or remove space between 'defined' and '(' in '#if defined (FOO)' +sp_defined_paren = remove # ignore/add/remove/force + +# Add or remove space between 'throw' and '(' in 'throw (something)' +sp_throw_paren = force # ignore/add/remove/force + +# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];' +sp_after_throw = force # ignore/add/remove/force + +# Add or remove space between 'catch' and '(' in 'catch (something) { }' +# If set to ignore, sp_before_sparen is used. +sp_catch_paren = force # ignore/add/remove/force + +# Add or remove space between 'version' and '(' in 'version (something) { }' (D language) +# If set to ignore, sp_before_sparen is used. +sp_version_paren = force # ignore/add/remove/force + +# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language) +# If set to ignore, sp_before_sparen is used. +sp_scope_paren = force # ignore/add/remove/force + +# Add or remove space between macro and value +sp_macro = force # ignore/add/remove/force + +# Add or remove space between macro function ')' and value +sp_macro_func = force # ignore/add/remove/force + +# Add or remove space between 'else' and '{' if on the same line +sp_else_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'else' if on the same line +sp_brace_else = force # ignore/add/remove/force + +# Add or remove space between '}' and the name of a typedef on the same line +sp_brace_typedef = force # ignore/add/remove/force + +# Add or remove space between 'catch' and '{' if on the same line +sp_catch_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'catch' if on the same line +sp_brace_catch = force # ignore/add/remove/force + +# Add or remove space between 'finally' and '{' if on the same line +sp_finally_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'finally' if on the same line +sp_brace_finally = force # ignore/add/remove/force + +# Add or remove space between 'try' and '{' if on the same line +sp_try_brace = force # ignore/add/remove/force + +# Add or remove space between get/set and '{' if on the same line +sp_getset_brace = force # ignore/add/remove/force + +# Add or remove space between type and open brace of an unnamed temporary +# direct-list-initialization. +sp_type_brace_init_lst = add # ignore/add/remove/force + +# Add or remove space between a variable and '{' for a namespace +sp_word_brace_ns = force # ignore/add/remove/force + +# Add or remove space before the '::' operator +sp_before_dc = remove # ignore/add/remove/force + +# Add or remove space after the '::' operator +sp_after_dc = remove # ignore/add/remove/force + +# Add or remove around the D named array initializer ':' operator +sp_d_array_colon = force # ignore/add/remove/force + +# Add or remove space after the '!' (not) operator. Default=Remove +sp_not = remove # ignore/add/remove/force + +# Add or remove space after the '~' (invert) operator. Default=Remove +sp_inv = remove # ignore/add/remove/force + +# Add or remove space after the '&' (address-of) operator. Default=Remove +# This does not affect the spacing after a '&' that is part of a type. +sp_addr = remove # ignore/add/remove/force + +# Add or remove space around the '.' or '->' operators. Default=Remove +sp_member = remove # ignore/add/remove/force + +# Add or remove space after the '*' (dereference) operator. Default=Remove +# This does not affect the spacing after a '*' that is part of a type. +sp_deref = remove # ignore/add/remove/force + +# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove +sp_sign = remove # ignore/add/remove/force + +# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove +sp_incdec = remove # ignore/add/remove/force + +# Add or remove space before a backslash-newline at the end of a line. Default=Add +sp_before_nl_cont = force # ignore/add/remove/force + +# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;' +sp_after_oc_scope = remove # ignore/add/remove/force + +# Add or remove space after the colon in message specs +# '-(int) f:(int) x;' vs '-(int) f: (int) x;' +sp_after_oc_colon = force # ignore/add/remove/force + +# Add or remove space before the colon in message specs +# '-(int) f: (int) x;' vs '-(int) f : (int) x;' +sp_before_oc_colon = force # ignore/add/remove/force + +# Add or remove space after the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};' +sp_after_oc_dict_colon = force # ignore/add/remove/force + +# Add or remove space before the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};' +sp_before_oc_dict_colon = force # ignore/add/remove/force + +# Add or remove space after the colon in message specs +# '[object setValue:1];' vs '[object setValue: 1];' +sp_after_send_oc_colon = force # ignore/add/remove/force + +# Add or remove space before the colon in message specs +# '[object setValue:1];' vs '[object setValue :1];' +sp_before_send_oc_colon = remove # ignore/add/remove/force + +# Add or remove space after the (type) in message specs +# '-(int)f: (int) x;' vs '-(int)f: (int)x;' +sp_after_oc_type = remove # ignore/add/remove/force + +# Add or remove space after the first (type) in message specs +# '-(int) f:(int)x;' vs '-(int)f:(int)x;' +sp_after_oc_return_type = remove # ignore/add/remove/force + +# Add or remove space between '@selector' and '(' +# '@selector(msgName)' vs '@selector (msgName)' +# Also applies to @protocol() constructs +sp_after_oc_at_sel = remove # ignore/add/remove/force + +# Add or remove space between '@selector(x)' and the following word +# '@selector(foo) a:' vs '@selector(foo)a:' +sp_after_oc_at_sel_parens = force # ignore/add/remove/force + +# Add or remove space inside '@selector' parens +# '@selector(foo)' vs '@selector( foo )' +# Also applies to @protocol() constructs +sp_inside_oc_at_sel_parens = remove # ignore/add/remove/force + +# Add or remove space before a block pointer caret +# '^int (int arg){...}' vs. ' ^int (int arg){...}' +sp_before_oc_block_caret = remove # ignore/add/remove/force + +# Add or remove space after a block pointer caret +# '^int (int arg){...}' vs. '^ int (int arg){...}' +sp_after_oc_block_caret = remove # ignore/add/remove/force + +# Add or remove space between the receiver and selector in a message. +# '[receiver selector ...]' +sp_after_oc_msg_receiver = remove # ignore/add/remove/force + +# Add or remove space after @property. +sp_after_oc_property = force # ignore/add/remove/force + +# Add or remove space around the ':' in 'b ? t : f' +sp_cond_colon = force # ignore/add/remove/force + +# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon. +sp_cond_colon_before = force # ignore/add/remove/force + +# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon. +sp_cond_colon_after = force # ignore/add/remove/force + +# Add or remove space around the '?' in 'b ? t : f' +sp_cond_question = force # ignore/add/remove/force + +# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question. +sp_cond_question_before = force # ignore/add/remove/force + +# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question. +sp_cond_question_after = force # ignore/add/remove/force + +# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options. +sp_cond_ternary_short = force # ignore/add/remove/force + +# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here. +sp_case_label = force # ignore/add/remove/force + +# Control the space around the D '..' operator. +sp_range = force # ignore/add/remove/force + +# Control the spacing after ':' in 'for (TYPE VAR : EXPR)' +sp_after_for_colon = force # ignore/add/remove/force + +# Control the spacing before ':' in 'for (TYPE VAR : EXPR)' +sp_before_for_colon = force # ignore/add/remove/force + +# Control the spacing in 'extern (C)' (D) +sp_extern_paren = force # ignore/add/remove/force + +# Control the space after the opening of a C++ comment '// A' vs '//A' +sp_cmt_cpp_start = force # ignore/add/remove/force + +# TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'. +sp_cmt_cpp_doxygen = false # false/true + +# TRUE: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'. +sp_cmt_cpp_qttr = false # false/true + +# Controls the spaces between #else or #endif and a trailing comment +sp_endif_cmt = force # ignore/add/remove/force + +# Controls the spaces after 'new', 'delete' and 'delete[]' +sp_after_new = force # ignore/add/remove/force + +# Controls the spaces between new and '(' in 'new()' +sp_between_new_paren = remove # ignore/add/remove/force + +# Controls the spaces before a trailing or embedded comment +sp_before_tr_cmt = force # ignore/add/remove/force + +# Number of spaces before a trailing or embedded comment +sp_num_before_tr_cmt = 0 # number + +# Control space between a Java annotation and the open paren. +sp_annotation_paren = remove # ignore/add/remove/force + +# +# Code alignment (not left column spaces/tabs) +# + +# Whether to keep non-indenting tabs +align_keep_tabs = false # false/true + +# Whether to use tabs for aligning +align_with_tabs = true # false/true + +# Whether to bump out to the next tab when aligning +align_on_tabstop = true # false/true + +# Whether to right-align numbers +align_number_right = true # false/true + +# Whether to keep whitespace not required for alignment. +align_keep_extra_space = false # false/true + +# Align variable definitions in prototypes and functions +align_func_params = false # false/true + +# Align parameters in single-line functions that have the same name. +# The function names must already be aligned with each other. +align_same_func_call_params = false # false/true + +# The span for aligning parameters in single line functions with the same name (0=don't align). +align_same_func_call_params_span = 0 # unsigned number + +# The thresh for aligning function call parameters (0=no limit). +align_same_func_call_params_thresh = 0 # unsigned number + +# The span for aligning variable definitions (0=don't align) +align_var_def_span = 0 # number + +# How to align the star in variable definitions. +# 0=Part of the type 'void * foo;' +# 1=Part of the variable 'void *foo;' +# 2=Dangling 'void *foo;' +align_var_def_star_style = 1 # number + +# How to align the '&' in variable definitions. +# 0=Part of the type +# 1=Part of the variable +# 2=Dangling +align_var_def_amp_style = 1 # number + +# The threshold for aligning variable definitions (0=no limit) +align_var_def_thresh = 10 # number + +# The gap for aligning variable definitions +align_var_def_gap = 0 # number + +# Whether to align the colon in struct bit fields +align_var_def_colon = false # false/true + +# Whether to align any attribute after the variable name +align_var_def_attribute = false # false/true + +# Whether to align inline struct/enum/union variable definitions +align_var_def_inline = false # false/true + +# The span for aligning on '=' in assignments (0=don't align) +align_assign_span = 0 # number + +# The threshold for aligning on '=' in assignments (0=no limit) +align_assign_thresh = 0 # number + +# The span for aligning on '=' in enums (0=don't align) +align_enum_equ_span = 0 # number + +# The threshold for aligning on '=' in enums (0=no limit) +align_enum_equ_thresh = 0 # number + +# The span for aligning struct/union (0=don't align) +align_var_struct_span = 0 # number + +# The threshold for aligning struct/union member definitions (0=no limit) +align_var_struct_thresh = 0 # number + +# The gap for aligning struct/union member definitions +align_var_struct_gap = 0 # number + +# The span for aligning struct initializer values (0=don't align) +align_struct_init_span = 0 # number + +# The minimum space between the type and the synonym of a typedef +align_typedef_gap = 1 # number + +# The span for aligning single-line typedefs (0=don't align) +align_typedef_span = 0 # number + +# How to align typedef'd functions with other typedefs +# 0: Don't mix them at all +# 1: align the open paren with the types +# 2: align the function type name with the other type names +align_typedef_func = 0 # number + +# Controls the positioning of the '*' in typedefs. Just try it. +# 0: Align on typedef type, ignore '*' +# 1: The '*' is part of type name: typedef int *pint; +# 2: The '*' is part of the type, but dangling: typedef int *pint; +align_typedef_star_style = 1 # number + +# Controls the positioning of the '&' in typedefs. Just try it. +# 0: Align on typedef type, ignore '&' +# 1: The '&' is part of type name: typedef int &pint; +# 2: The '&' is part of the type, but dangling: typedef int &pint; +align_typedef_amp_style = 1 # number + +# The span for aligning comments that end lines (0=don't align) +align_right_cmt_span = 4 # number + +# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment +align_right_cmt_mix = false # false/true + +# If a trailing comment is more than this number of columns away from the text it follows, +# it will qualify for being aligned. This has to be > 0 to do anything. +align_right_cmt_gap = 1 # number + +# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore) +align_right_cmt_at_col = 41 # number + +# The span for aligning function prototypes (0=don't align) +align_func_proto_span = 0 # number + +# Minimum gap between the return type and the function name. +align_func_proto_gap = 0 # number + +# Align function protos on the 'operator' keyword instead of what follows +align_on_operator = false # false/true + +# Whether to mix aligning prototype and variable declarations. +# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options. +align_mix_var_proto = false # false/true + +# Align single-line functions with function prototypes, uses align_func_proto_span +align_single_line_func = true # false/true + +# Aligning the open brace of single-line functions. +# Requires align_single_line_func=true, uses align_func_proto_span +align_single_line_brace = false # false/true + +# Gap for align_single_line_brace. +align_single_line_brace_gap = 0 # number + +# The span for aligning ObjC msg spec (0=don't align) +align_oc_msg_spec_span = 1 # number + +# Whether to align macros wrapped with a backslash and a newline. +# This will not work right if the macro contains a multi-line comment. +align_nl_cont = false # false/true + +# # Align macro functions and variables together +align_pp_define_together = true # false/true + +# The minimum space between label and value of a preprocessor define +align_pp_define_gap = 1 # number + +# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks) +align_pp_define_span = 8 # number + +# Align lines that start with '<<' with previous '<<'. Default=true +align_left_shift = false # false/true + +# Align text after asm volatile () colons. +align_asm_colon = true # false/true + +# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align) +align_oc_msg_colon_span = 0 # number + +# If true, always align with the first parameter, even if it is too short. +align_oc_msg_colon_first = false # false/true + +# Aligning parameters in an Obj-C '+' or '-' declaration on the ':' +align_oc_decl_colon = false # false/true + +# +# Newline adding and removing options +# + +# Whether to collapse empty blocks between '{' and '}' +nl_collapse_empty_body = true # false/true + +# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };' +nl_assign_leave_one_liners = true # false/true + +# Don't split one-line braced statements inside a class xx { } body +nl_class_leave_one_liners = true # false/true + +# Don't split one-line enums: 'enum foo { BAR = 15 };' +nl_enum_leave_one_liners = true # false/true + +# Don't split one-line get or set functions +nl_getset_leave_one_liners = true # false/true + +# Don't split one-line function definitions - 'int foo() { return 0; }' +nl_func_leave_one_liners = true # false/true + +# Don't split one-line C++11 lambdas - '[]() { return 0; }' +nl_cpp_lambda_leave_one_liners = true # false/true + +# Don't split one-line if/else statements - 'if(a) b++;' +nl_if_leave_one_liners = false # false/true + +# Don't split one-line while statements - 'while(a) b++;' +nl_while_leave_one_liners = false # false/true + +# Don't split one-line OC messages +nl_oc_msg_leave_one_liner = true # false/true + +# Add or remove newlines at the start of the file +nl_start_of_file = remove # ignore/add/remove/force + +# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force' +nl_start_of_file_min = 0 # number + +# Add or remove newline at the end of the file +nl_end_of_file = force # ignore/add/remove/force + +# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force') +nl_end_of_file_min = 1 # number + +# Add or remove newline between '=' and '{' +nl_assign_brace = remove # ignore/add/remove/force + +# Add or remove newline between '=' and '[' (D only) +nl_assign_square = remove # ignore/add/remove/force + +# Add or remove newline after '= [' (D only). Will also affect the newline before the ']' +nl_after_square_assign = remove # ignore/add/remove/force + +# The number of blank lines after a block of variable definitions at the top of a function body +# 0 = No change (default) +nl_var_def_blk_end_func_top = 1 # number + +# The number of newlines before a block of typedefs +# 0 = No change (default) +# the option 'nl_after_access_spec' takes preference over 'nl_typedef_blk_start' +nl_typedef_blk_start = 2 # number + +# The number of newlines after a block of typedefs +# 0 = No change (default) +nl_typedef_blk_end = 2 # number + +# The maximum consecutive newlines within a block of typedefs +# 0 = No change (default) +nl_typedef_blk_in = 1 # number + +# The number of newlines before a block of variable definitions not at the top of a function body +# 0 = No change (default) +# the option 'nl_after_access_spec' takes preference over 'nl_var_def_blk_start' +nl_var_def_blk_start = 2 # number + +# The number of newlines after a block of variable definitions not at the top of a function body +# 0 = No change (default) +nl_var_def_blk_end = 2 # number + +# The maximum consecutive newlines within a block of variable definitions +# 0 = No change (default) +nl_var_def_blk_in = 1 # number + +# Add or remove newline between a function call's ')' and '{', as in: +# list_for_each(item, &list) { } +nl_fcall_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'enum' and '{' +nl_enum_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'struct and '{' +nl_struct_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'union' and '{' +nl_union_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'if' and '{' +nl_if_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'else' +nl_brace_else = remove # ignore/add/remove/force + +# Add or remove newline between 'else if' and '{' +# If set to ignore, nl_if_brace is used instead +nl_elseif_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and '{' +nl_else_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and 'if' +nl_else_if = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'finally' +nl_brace_finally = remove # ignore/add/remove/force + +# Add or remove newline between 'finally' and '{' +nl_finally_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'try' and '{' +nl_try_brace = remove # ignore/add/remove/force + +# Add or remove newline between get/set and '{' +nl_getset_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'for' and '{' +nl_for_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'catch' and '{' +nl_catch_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'catch' +nl_brace_catch = remove # ignore/add/remove/force + +# Add or remove newline between '}' and ']' +nl_brace_square = remove # ignore/add/remove/force + +# Add or remove newline between '}' and ')' in a function invocation +nl_brace_fparen = remove # ignore/add/remove/force + +# Add or remove newline between 'while' and '{' +nl_while_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'scope (x)' and '{' (D) +nl_scope_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'unittest' and '{' (D) +nl_unittest_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'version (x)' and '{' (D) +nl_version_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'using' and '{' +nl_using_brace = remove # ignore/add/remove/force + +# Add or remove newline between two open or close braces. +# Due to general newline/brace handling, REMOVE may not work. +nl_brace_brace = force # ignore/add/remove/force + +# Add or remove newline between 'do' and '{' +nl_do_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'while' of 'do' statement +nl_brace_while = remove # ignore/add/remove/force + +# Add or remove newline between 'switch' and '{' +nl_switch_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'synchronized' and '{' +nl_synchronized_brace = remove # ignore/add/remove/force + +# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc. +# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace. +nl_multi_line_cond = false # false/true + +# Force a newline in a define after the macro name for multi-line defines. +nl_multi_line_define = false # false/true + +# Whether to put a newline before 'case' statement, not after the first 'case' +nl_before_case = false # false/true + +# Add or remove newline between ')' and 'throw' +nl_before_throw = force # ignore/add/remove/force + +# Whether to put a newline after 'case' statement +nl_after_case = true # false/true + +# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case. +nl_case_colon_brace = remove # ignore/add/remove/force + +# Newline between namespace and { +nl_namespace_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'template<>' and whatever follows. +nl_template_class = force # ignore/add/remove/force + +# Add or remove newline between 'class' and '{' +nl_class_brace = remove # ignore/add/remove/force + +# Add or remove newline before/after each ',' in the base class list, +# (tied to pos_class_comma). +nl_class_init_args = remove # ignore/add/remove/force + +# Add or remove newline after each ',' in the constructor member initialization. +# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma. +nl_constr_init_args = remove # ignore/add/remove/force + +# Add or remove newline between return type and function name in a function definition +nl_func_type_name = remove # ignore/add/remove/force + +# Add or remove newline between return type and function name inside a class {} +# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore. +nl_func_type_name_class = remove # ignore/add/remove/force + +# Add or remove newline between function scope and name +# Controls the newline after '::' in 'void A::f() { }' +nl_func_scope_name = remove # ignore/add/remove/force + +# Add or remove newline between return type and function name in a prototype +nl_func_proto_type_name = remove # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the declaration +nl_func_paren = remove # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the definition +nl_func_def_paren = remove # ignore/add/remove/force + +# Add or remove newline after '(' in a function declaration +nl_func_decl_start = remove # ignore/add/remove/force + +# Add or remove newline after '(' in a function definition +nl_func_def_start = remove # ignore/add/remove/force + +# Overrides nl_func_decl_start when there is only one parameter. +nl_func_decl_start_single = remove # ignore/add/remove/force + +# Overrides nl_func_def_start when there is only one parameter. +nl_func_def_start_single = remove # ignore/add/remove/force + +# Add or remove newline after each ',' in a function declaration +nl_func_decl_args = remove # ignore/add/remove/force + +# Add or remove newline after each ',' in a function definition +nl_func_def_args = remove # ignore/add/remove/force + +# Add or remove newline before the ')' in a function declaration +nl_func_decl_end = remove # ignore/add/remove/force + +# Add or remove newline before the ')' in a function definition +nl_func_def_end = remove # ignore/add/remove/force + +# Overrides nl_func_decl_end when there is only one parameter. +nl_func_decl_end_single = remove # ignore/add/remove/force + +# Overrides nl_func_def_end when there is only one parameter. +nl_func_def_end_single = remove # ignore/add/remove/force + +# Add or remove newline between '()' in a function declaration. +nl_func_decl_empty = remove # ignore/add/remove/force + +# Add or remove newline between '()' in a function definition. +nl_func_def_empty = remove # ignore/add/remove/force + +# Whether to put each OC message parameter on a separate line +# See nl_oc_msg_leave_one_liner +nl_oc_msg_args = false # false/true + +# Add or remove newline between function signature and '{' +nl_fdef_brace = remove # ignore/add/remove/force + +# Add or remove newline between C++11 lambda signature and '{' +nl_cpp_ldef_brace = remove # ignore/add/remove/force + +# Add or remove a newline between the return keyword and return expression. +nl_return_expr = remove # ignore/add/remove/force + +# Whether to put a newline after semicolons, except in 'for' statements +nl_after_semicolon = true # false/true + +# Java: Control the newline between the ')' and '{{' of the double brace initializer. +nl_paren_dbrace_open = remove # ignore/add/remove/force + +# Whether to put a newline after brace open. +nl_after_brace_open = true # false/true + +# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is +# placed between the open brace and a trailing single-line comment. +nl_after_brace_open_cmt = false # false/true + +# Whether to put a newline after a virtual brace open with a non-empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open = true # false/true + +# Whether to put a newline after a virtual brace open with an empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open_empty = true # false/true + +# Whether to put a newline after a brace close. +# Does not apply if followed by a necessary ';'. +nl_after_brace_close = true # false/true + +# Whether to put a newline after a virtual brace close. +# Would add a newline before return in: 'if (foo) a++; return;' +nl_after_vbrace_close = true # false/true + +# Control the newline between the close brace and 'b' in: 'struct { int a; } b;' +# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close +nl_brace_struct_var = remove # ignore/add/remove/force + +# Whether to alter newlines in '#define' macros +nl_define_macro = false # false/true + +# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'. Does not affect the whole-file #ifdef. +nl_squeeze_ifdef = true # false/true + +# Add or remove blank line before 'if' +nl_before_if = remove # ignore/add/remove/force + +# Add or remove blank line after 'if' statement +nl_after_if = remove # ignore/add/remove/force + +# Add or remove blank line before 'for' +nl_before_for = remove # ignore/add/remove/force + +# Add or remove blank line after 'for' statement +nl_after_for = remove # ignore/add/remove/force + +# Add or remove blank line before 'while' +nl_before_while = remove # ignore/add/remove/force + +# Add or remove blank line after 'while' statement +nl_after_while = remove # ignore/add/remove/force + +# Add or remove blank line before 'switch' +nl_before_switch = remove # ignore/add/remove/force + +# Add or remove blank line after 'switch' statement +nl_after_switch = remove # ignore/add/remove/force + +# Add or remove blank line before 'synchronized' +nl_before_synchronized = remove # ignore/add/remove/force + +# Add or remove blank line after 'synchronized' statement +nl_after_synchronized = remove # ignore/add/remove/force + +# Add or remove blank line before 'do' +nl_before_do = remove # ignore/add/remove/force + +# Add or remove blank line after 'do/while' statement +nl_after_do = remove # ignore/add/remove/force + +# Whether to double-space commented-entries in struct/union/enum +nl_ds_struct_enum_cmt = false # false/true + +# force nl before } of a struct/union/enum +# (lower priority than 'eat_blanks_before_close_brace') +nl_ds_struct_enum_close_brace = false # false/true + +# Add or remove a newline before/after a class colon, +# (tied to pos_class_colon). +nl_class_colon = remove # ignore/add/remove/force + +# Add or remove a newline around a class constructor colon. +# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma. +nl_constr_colon = remove # ignore/add/remove/force + +# Change simple unbraced if statements into a one-liner +# 'if(b)\n i++;' => 'if(b) i++;' +nl_create_if_one_liner = false # false/true + +# Change simple unbraced for statements into a one-liner +# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);' +nl_create_for_one_liner = false # false/true + +# Change simple unbraced while statements into a one-liner +# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);' +nl_create_while_one_liner = false # false/true + +# +# Positioning options +# + +# The position of arithmetic operators in wrapped expressions +pos_arith = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of assignment in wrapped expressions. +# Do not affect '=' followed by '{' +pos_assign = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of boolean operators in wrapped expressions +pos_bool = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of comparison operators in wrapped expressions +pos_compare = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of conditional (b ? t : f) operators in wrapped expressions +pos_conditional = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in wrapped expressions +pos_comma = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in the base class list if there are more than one line, +# (tied to nl_class_init_args). +pos_class_comma = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in the constructor initialization list. +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon. +pos_constr_comma = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of trailing/leading class colon, between class and base class list +# (tied to nl_class_colon). +pos_class_colon = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of colons between constructor and member initialization, +# (tied to UO_nl_constr_colon). +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma. +pos_constr_colon = join # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# +# Line Splitting options +# + +# Try to limit code width to N number of columns +code_width = 80 # number + +# Whether to fully split long 'for' statements at semi-colons +ls_for_split_full = false # false/true + +# Whether to fully split long function protos/calls at commas +ls_func_split_full = false # false/true + +# Whether to split lines as close to code_width as possible and ignore some groupings +ls_code_width = true # false/true + +# +# Blank line options +# + +# The maximum consecutive newlines (3 = 2 blank lines) +nl_max = 2 # number + +# The number of newlines after a function prototype, if followed by another function prototype +nl_after_func_proto = 1 # number + +# The number of newlines after a function prototype, if not followed by another function prototype +nl_after_func_proto_group = 2 # number + +# The number of newlines after '}' of a multi-line function body +nl_after_func_body = 2 # number + +# The number of newlines after '}' of a multi-line function body in a class declaration +nl_after_func_body_class = 1 # number + +# The number of newlines after '}' of a single line function body +nl_after_func_body_one_liner = 1 # number + +# The minimum number of newlines before a multi-line comment. +# Doesn't apply if after a brace open or another multi-line comment. +nl_before_block_comment = 2 # number + +# The minimum number of newlines before a single-line C comment. +# Doesn't apply if after a brace open or other single-line C comments. +nl_before_c_comment = 1 # number + +# The minimum number of newlines before a CPP comment. +# Doesn't apply if after a brace open or other CPP comments. +nl_before_cpp_comment = 1 # number + +# Whether to force a newline after a multi-line comment. +nl_after_multiline_comment = true # false/true + +# Whether to force a newline after a label's colon. +nl_after_label_colon = false # false/true + +# The number of newlines after '}' or ';' of a struct/enum/union definition +nl_after_struct = 2 # number + +# The number of newlines after '}' or ';' of a class definition +nl_after_class = 2 # number + +# The number of newlines after '}' of a namespace +nl_after_namespace = 2 # number + +# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. +# Will not change the newline count if after a brace open. +# 0 = No change. +nl_before_access_spec = 2 # number + +# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label. +# 0 = No change. +# the option 'nl_after_access_spec' takes preference over 'nl_typedef_blk_start' and 'nl_var_def_blk_start' +nl_after_access_spec = 1 # number + +# The number of newlines between a function def and the function comment. +# 0 = No change. +nl_comment_func_def = 1 # number + +# The number of newlines after a try-catch-finally block that isn't followed by a brace close. +# 0 = No change. +nl_after_try_catch_finally = 1 # number + +# The number of newlines before and after a property, indexer or event decl. +# 0 = No change. +nl_around_cs_property = 1 # number + +# The number of newlines between the get/set/add/remove handlers in C#. +# 0 = No change. +nl_between_get_set = 1 # number + +# Add or remove newline between C# property and the '{' +nl_property_brace = remove # ignore/add/remove/force + +# Whether to remove blank lines after '{' +eat_blanks_after_open_brace = true # false/true + +# Whether to remove blank lines before '}' +eat_blanks_before_close_brace = true # false/true + +# How aggressively to remove extra newlines not in preproc. +# 0: No change +# 1: Remove most newlines not handled by other config +# 2: Remove all newlines and reformat completely by config +nl_remove_extra_newlines = 1 # number + +# Whether to put a blank line before 'return' statements, unless after an open brace. +nl_before_return = false # false/true + +# Whether to put a blank line after 'return' statements, unless followed by a close brace. +nl_after_return = false # false/true + +# Whether to put a newline after a Java annotation statement. +# Only affects annotations that are after a newline. +nl_after_annotation = force # ignore/add/remove/force + +# +# Code modifying options (non-whitespace) +# + +# Add or remove braces on single-line 'do' statement +mod_full_brace_do = force # ignore/add/remove/force + +# Add or remove braces on single-line 'for' statement +mod_full_brace_for = remove # ignore/add/remove/force + +# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'. +mod_full_brace_if = remove # ignore/add/remove/force + +# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if. +# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed. +mod_full_brace_if_chain = 1 # unsigned number + +# Don't remove braces around statements that span N newlines +mod_full_brace_nl = 2 # number + +# Add or remove braces on single-line 'while' statement +mod_full_brace_while = remove # ignore/add/remove/force + +# Add or remove braces on single-line 'using ()' statement +mod_full_brace_using = remove # ignore/add/remove/force + +# Add or remove unnecessary paren on 'return' statement +mod_paren_on_return = remove # ignore/add/remove/force + +# Whether to change optional semicolons to real semicolons +mod_pawn_semicolon = false # false/true + +# Add parens on 'while' and 'if' statement around bools +mod_full_paren_if_bool = false # false/true + +# Whether to remove superfluous semicolons +mod_remove_extra_semicolon = true # false/true + +# If a function body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_function_closebrace_comment = 0 # number + +# If a namespace body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_namespace_closebrace_comment = 0 # number + +# If a switch body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_switch_closebrace_comment = 0 # number + +# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after +# the #endif, a comment will be added. +mod_add_long_ifdef_endif_comment = 0 # number + +# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after +# the #else, a comment will be added. +mod_add_long_ifdef_else_comment = 0 # number + +# If TRUE, will sort consecutive single-line 'import' statements [Java, D] +mod_sort_import = true # false/true + +# If TRUE, will sort consecutive single-line 'using' statements [C#] +mod_sort_using = true # false/true + +# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C] +# This is generally a bad idea, as it may break your code. +mod_sort_include = false # false/true + +# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace. +mod_move_case_break = false # false/true + +# If TRUE, it will remove a void 'return;' that appears as the last statement in a function. +mod_remove_empty_return = true # false/true + +# +# Comment modifications +# + +# Try to wrap comments at cmt_width columns +cmt_width = 80 # number + +# Set the comment reflow mode (default: 0) +# 0: no reflowing (apart from the line wrapping due to cmt_width) +# 1: no touching at all +# 2: full reflow +cmt_reflow_mode = 1 # number + +# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting. +cmt_convert_tab_to_spaces = false # false/true + +# If false, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars. +# Default is true. +cmt_indent_multi = true # false/true + +# Whether to group c-comments that look like they are in a block +cmt_c_group = true # false/true + +# Whether to put an empty '/*' on the first line of the combined c-comment +cmt_c_nl_start = true # false/true + +# Whether to put a newline before the closing '*/' of the combined c-comment +cmt_c_nl_end = true # false/true + +# Whether to group cpp-comments that look like they are in a block +cmt_cpp_group = true # false/true + +# Whether to put an empty '/*' on the first line of the combined cpp-comment +cmt_cpp_nl_start = true # false/true + +# Whether to put a newline before the closing '*/' of the combined cpp-comment +cmt_cpp_nl_end = true # false/true + +# Whether to change cpp-comments into c-comments +cmt_cpp_to_c = false # false/true + +# Whether to put a star on subsequent comment lines +cmt_star_cont = true # false/true + +# The number of spaces to insert at the start of subsequent comment lines +cmt_sp_before_star_cont = 0 # number + +# The number of spaces to insert after the star on subsequent comment lines +cmt_sp_after_star_cont = 0 # number + +# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of +# the comment are the same length. Default=True +cmt_multi_check_last = false # false/true + +# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_header = "" # string + +# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_footer = "" # string + +# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment. +# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff. +# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... } +cmt_insert_func_header = "" # string + +# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment. +# Will substitute $(class) with the class name. +cmt_insert_class_header = "" # string + +# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment. +# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff. +cmt_insert_oc_msg_header = "" # string + +# If a preprocessor is encountered when stepping backwards from a function name, then +# this option decides whether the comment should be inserted. +# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. +cmt_insert_before_preproc = false # false/true + +# +# Preprocessor options +# + +# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false) +pp_indent_at_level = false # false/true + +# Whether to indent #if/#else/#endif at the parenthesis level if the brace +# level is 0. If false, these are indented from column 1. +pp_indent_at_level0 = false # false/true + +# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level). +# If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level). +# Default=1. +pp_indent_count = 1 # number + +# Add or remove space after # based on pp level of #if blocks +pp_space_after = remove # ignore/add/remove/force + +# Sets the number of spaces added with pp_space_after +pp_space_count = 1 # number + +# The indent for #region and #endregion in C# and '#pragma region' in C/C++ +pp_indent_region = 0 # number + +# Whether to indent the code between #region and #endregion +pp_region_indent_code = false # false/true + +# If pp_indent_at_level=true, sets the indent for #if, #else and #endif when not at file-level. +# 0: indent preprocessors using output_tab_size. +# >0: column at which all preprocessors will be indented. +pp_indent_if = 0 # number + +# Control whether to indent the code between #if, #else and #endif. +pp_if_indent_code = false # false/true + +# Whether to indent '#define' at the brace level (true) or from column 1 (false) +pp_define_at_level = false # false/true + +# Use or Do not Use options +# + +# True: indent_func_call_param will be used +# False: indent_func_call_param will NOT be used +use_indent_func_call_param = true # false/true + +# True: indent_continue will be used only once +# False: indent_continue will be used every time (default) +use_indent_continue_only_once = false # false/true + +# You can force a token to be a type with the 'type' option. +# Example: +# type myfoo1 myfoo2 +# +# You can create custom macro-based indentation using macro-open, +# macro-else and macro-close. +# Example: +# macro-open BEGIN_TEMPLATE_MESSAGE_MAP +# macro-open BEGIN_MESSAGE_MAP +# macro-close END_MESSAGE_MAP +# +# You can assign any keyword to any type with the set option. +# set func_call_user _ N_ +# +# The full syntax description of all custom definition config entries +# is shown below: +# +# define custom tokens as: +# - embed whitespace in token using '' escape character, or +# put token in quotes +# - these: ' " and ` are recognized as quote delimiters +# +# type token1 token2 token3 ... +# ^ optionally specify multiple tokens on a single line +# define def_token output_token +# ^ output_token is optional, then NULL is assumed +# macro-open token +# macro-close token +# macro-else token +# set id token1 token2 ... +# ^ optionally specify multiple tokens on a single line +# ^ id is one of the names in token_enum.h sans the CT_ prefix, +# e.g. PP_PRAGMA +# +# all tokens are separated by any mix of ',' commas, '=' equal signs +# and whitespace (space, tab) +# +# You can add support for other file extensions using the 'file_ext' command. +# The first arg is the language name used with the '-l' option. +# The remaining args are file extensions, matched with 'endswith'. +# file_ext CPP .ch .cxx .cpp.in +# +type byte cchar uchar ushort word uint ulong llong ullong +type int8 uint8 int16 uint16 int32 uint32 int64 uint64 +type FILE size_t ssize_t va_list wchar_t +type BOOL BSTR BYTE CHAR DOUBLE DWORD DWORD64 DWORD_PTR FALSE FLOAT +type HANDLE HKEY HRESULT HWND INT INT8 INT16 INT32 INT64 LONG LONG64 LONG_PTR +type LPARAM LPSTR LPCSTR LPCWSTR LPTSTR LPVOID LPWSTR PSZ SHORT TRUE +type UCHAR UINT UINT8 UINT16 UINT32 UINT64 UINT_PTR ULONG ULONG64 ULONG_PTR +type USHORT WCHAR WORD WORD_PTR WPARAM + |