summaryrefslogtreecommitdiffstats
path: root/configure.in
diff options
context:
space:
mode:
Diffstat (limited to 'configure.in')
-rw-r--r--configure.in290
1 files changed, 0 insertions, 290 deletions
diff --git a/configure.in b/configure.in
deleted file mode 100644
index e878a06..0000000
--- a/configure.in
+++ /dev/null
@@ -1,290 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl This file is part of the KDE libraries/packages
-dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
-
-dnl This file is free software; you can redistribute it and/or
-dnl modify it under the terms of the GNU Library General Public
-dnl License as published by the Free Software Foundation; either
-dnl version 2 of the License, or (at your option) any later version.
-
-dnl This library is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-dnl Library General Public License for more details.
-
-dnl You should have received a copy of the GNU Library General Public License
-dnl along with this library; see the file COPYING.LIB. If not, write to
-dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(gwenview-1.4.2, "3.5.7") dnl searches for some needed programs
-
-AM_MAINTAINER_MODE
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3.2)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.2)
-
-KDE_ENABLE_HIDDEN_VISIBILITY
-
-KDE_CHECK_LIB(m, lround, [
- AC_DEFINE(HAVE_LROUND, 1, [Define if you have lround])
-])
-
-#
-# KIPI
-#
-AC_ARG_WITH(kipi,
- AC_HELP_STRING([--without-kipi], [build Gwenview without KIPI, 'KDE Image Plugin Interface']),
- [want_kipi=$withval],
- [want_kipi=yes]
-)
-
-if test "$want_kipi" = "yes"; then
- AC_MSG_NOTICE(checking if KIPI is installed)
- KDE_CHECK_HEADER(libkipi/interface.h,
- have_kipi=yes,
- have_kipi=no)
-
- if test "$have_kipi" = "yes"; then
- AC_DEFINE(GV_HAVE_KIPI, 1, [If we have libkipi installed])
- GV_LIB_KIPI="-lkipi"
- AC_SUBST(GV_LIB_KIPI)
- else
- AC_MSG_WARN([KIPI is not installed. Gwenview will be build without KIPI support.])
- fi
-fi
-
-#
-# Imlib/Mosfet scaling
-#
-AM_PROG_AS
-
-# MMX test duped from tdelibs/tdefx - it should be probably moved to admin/
-dnl -----------------------------------------------------
-dnl IA32 checks
-dnl -----------------------------------------------------
-
-gv_asm_defs=
-case $host_cpu in
- i*86 )
- AC_MSG_CHECKING(for assembler support for IA32 extensions)
-
- dnl MMX check
- AC_TRY_COMPILE(, [ __asm__("pxor %mm0, %mm0") ],
- [
- echo $ECHO_N "MMX yes$ECHO_C"
- AC_DEFINE_UNQUOTED(HAVE_X86_MMX, 1, [Define to 1 if the assembler supports MMX instructions.])
- gv_asm_defs="$gv_asm_defs -DHAVE_X86_MMX"
- ], [ echo $ECHO_N "MMX no$ECHO_C" ])
-
- dnl SSE check
- AC_TRY_COMPILE(,[ __asm__("xorps %xmm0, %xmm0") ],
- [
- echo $ECHO_N ", SSE yes$ECHO_C"
- AC_DEFINE_UNQUOTED(HAVE_X86_SSE, 1, [Define to 1 if the assembler supports SSE instructions.])
- gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE"
- ], [ echo $ECHO_N ", SSE no$ECHO_C" ])
-
- dnl SSE2 check
- AC_TRY_COMPILE(, [ __asm__("xorpd %xmm0, %xmm0") ],
- [
- echo $ECHO_N ", SSE2 yes$ECHO_C"
- AC_DEFINE_UNQUOTED(HAVE_X86_SSE2, 1, [Define to 1 if the assembler supports SSE2 instructions.])
- gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE2"
- ], [ echo $ECHO_N ", SSE2 no$ECHO_C" ])
-
- dnl 3DNOW check
- AC_TRY_COMPILE(, [ __asm__("femms") ],
- [
- echo $ECHO_N ", 3DNOW yes$ECHO_C"
- AC_DEFINE_UNQUOTED(HAVE_X86_3DNOW, 1, [Define to 1 if the assembler supports 3DNOW instructions.])
- gv_asm_defs="$gv_asm_defs -DHAVE_X86_3DNOW"
- ], [ echo $ECHO_N ", 3DNOW no$ECHO_C" ])
- echo
- ;;
- powerpc )
- AC_MSG_CHECKING(for assembler support for AltiVec instructions)
- dnl AltiVec check
- AC_TRY_COMPILE(, [ __asm__("mtspr 256, %0\n\t" "vand %%v0, %%v0, %%v0" : : "r"(-1) ) ],
- [
- echo $ECHO_N " yes$ECHO_C"
- AC_DEFINE_UNQUOTED(HAVE_PPC_ALTIVEC, 1, [Define to 1 if the assembler supports AltiVec instructions.])
- gv_asm_defs="$gv_asm_defs -DHAVE_PPC_ALTIVEC"
- ], [ echo $ECHO_N ", AltiVec no$ECHO_C" ])
- echo
- ;;
-esac
-
-GV_ASM_DEFS="$gv_asm_defs"
-AC_SUBST(GV_ASM_DEFS)
-
-#
-# libmng check (for gvmngformattype.*)
-#
-LIBMNG=
-KDE_CHECK_HEADER(libmng.h,
- [
- KDE_CHECK_LIB(mng, mng_initialize,
- [
- AC_DEFINE_UNQUOTED(HAVE_LIBMNG, 1, [Define if you have libmng])
- LIBMNG="-lmng $LIBZ -lm"
- ], [], $LIBZ -lm)
- ])
-AC_SUBST(LIBMNG)
-if test -z "$LIBMNG"; then
- AC_WARN([Can't find libmng.h, Gwenview won't be compiled with MNG support])
-fi
-
-
-#
-# libxcursor
-#
-KDE_CHECK_HEADERS(X11/Xcursor/Xcursor.h,
- [KDE_CHECK_LIB(Xcursor, XcursorXcFileLoadImages, [
- GV_LIB_XCURSOR=-lXcursor
- AC_DEFINE_UNQUOTED(GV_HAVE_XCURSOR, 1, [Define to 1 if you have Xcursor])
- ], [ GV_LIB_XCURSOR= ], [ $X_PRE_LIBS -lX11 $X_EXTRA_LIBS ])],
- [ GV_LIB_XCURSOR= ], [#include <X11/Xlib.h>])
-AC_SUBST(GV_LIB_XCURSOR)
-if test -z "$GV_LIB_XCURSOR"; then
- AC_WARN([Can't find Xcursor.h, Gwenview won't be compiled with X cursor support])
-fi
-
-
-#
-# libexiv2
-#
-KDE_CHECK_HEADERS(exiv2/image.hpp, have_exiv2=yes, have_exiv2=no)
-
-if test "$have_exiv2" = "yes"; then
- LIB_EXIV2="-lexiv2"
- AC_SUBST(LIB_EXIV2)
-else
- AC_MSG_ERROR([You are missing libexiv2, which is required to compile Gwenview])
- DO_NOT_COMPILE="$DO_NOT_COMPILE gwenview"
-fi
-KDE_CREATE_SUBDIRSLIST
-AM_CONDITIONAL(doc_SUBDIR_included, test "x$doc_SUBDIR_included" = xyes)
-AM_CONDITIONAL(src_SUBDIR_included, test "x$src_SUBDIR_included" = xyes)
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ src/Makefile ])
-AC_CONFIG_FILES([ src/app/Makefile ])
-AC_CONFIG_FILES([ src/desktopfiles/Makefile ])
-AC_CONFIG_FILES([ src/doc/Makefile ])
-AC_CONFIG_FILES([ src/gvcore/Makefile ])
-AC_CONFIG_FILES([ src/gvdirpart/Makefile ])
-AC_CONFIG_FILES([ src/gvimagepart/Makefile ])
-AC_CONFIG_FILES([ src/imageutils/Makefile ])
-AC_CONFIG_FILES([ src/pics/Makefile ])
-AC_CONFIG_FILES([ src/pics/action/Makefile ])
-AC_CONFIG_FILES([ src/pics/app/Makefile ])
-AC_CONFIG_FILES([ src/pics/cursor/Makefile ])
-AC_CONFIG_FILES([ src/pics/thumbnail/Makefile ])
-AC_CONFIG_FILES([ src/tools/Makefile ])
-AC_CONFIG_FILES([ src/tsthread/Makefile ])
-AC_CONFIG_FILES([ src/updates/Makefile ])
-AC_OUTPUT
-if test "$want_kipi" = "yes" ; then
- if test "$have_kipi" != "yes" ; then
- echo ""
- echo "KIPI is not installed. Gwenview will be build without KIPI support."
- echo ""
- fi
-else
- echo ""
- echo "KIPI support has been disabled. Gwenview will be build without KIPI support."
- echo ""
-fi
-dnl Put here things to be done at the very end - telling users
-dnl about additional packages to install. Better yet is giving
-dnl each project / subdr its own configure.in.bot.
-
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
- # And if so, warn when they don't match
- if test "$kde_libs_prefix" != "$given_prefix"; then
- # And if kde doesn't know about the prefix yet
- echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
- if test $? -ne 0; then
- echo ""
- echo "Warning: you chose to install this package in $given_prefix,"
- echo "but KDE was found in $kde_libs_prefix."
- echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
- echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
- echo "Then restart KDE."
- echo ""
- fi
- fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
- echo ""
- echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
- echo "was not included. Therefore, GCC symbol visibility support remains disabled."
- echo ""
- echo "For better performance, consider including the Qt visibility supporting patch"
- echo "located at:"
- echo ""
- echo "http://bugs.kde.org/show_bug.cgi?id=109386"
- echo ""
- echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
- echo "everything will continue to work just fine without it."
- echo ""
-fi
-
-if test "$all_tests" = "bad"; then
- if test ! "$cache_file" = "/dev/null"; then
- echo ""
- echo "Please remove the file $cache_file after changing your setup"
- echo "so that configure will find the changes next time."
- echo ""
- fi
-else
- echo ""
- echo "Good - your configure finished. Start make now"
- echo ""
-fi