diff options
Diffstat (limited to 'doc/Makefile.in')
| -rw-r--r-- | doc/Makefile.in | 717 |
1 files changed, 0 insertions, 717 deletions
diff --git a/doc/Makefile.in b/doc/Makefile.in deleted file mode 100644 index 1d53b3e..0000000 --- a/doc/Makefile.in +++ /dev/null @@ -1,717 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# KDE tags expanded automatically by am_edit - $Revision$ -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = doc -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.in -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ -#>- html-recursive info-recursive install-data-recursive \ -#>- install-dvi-recursive install-exec-recursive \ -#>- install-html-recursive install-info-recursive \ -#>- install-pdf-recursive install-ps-recursive install-recursive \ -#>- installcheck-recursive installdirs-recursive pdf-recursive \ -#>- ps-recursive uninstall-recursive -#>+ 7 -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 1 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AR = @AR@ -ARTSCCONFIG = @ARTSCCONFIG@ -AUTOCONF = @AUTOCONF@ -AUTODIRS = @AUTODIRS@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CONF_FILES = @CONF_FILES@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOPIDLNG = @DCOPIDLNG@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO = @ECHO@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ -EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ -FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ -GMSGFMT = @GMSGFMT@ -GREP = @GREP@ -HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ -KCONFIG_COMPILER = @KCONFIG_COMPILER@ -KDECONFIG = @KDECONFIG@ -KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_INCLUDES = @KDE_INCLUDES@ -KDE_LDFLAGS = @KDE_LDFLAGS@ -KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ -KDE_MT_LIBS = @KDE_MT_LIBS@ -KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ -KDE_PLUGIN = @KDE_PLUGIN@ -KDE_RPATH = @KDE_RPATH@ -KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ -KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ -KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ -KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ -KDE_USE_FPIE = @KDE_USE_FPIE@ -KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ -KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ -KDE_USE_PIE = @KDE_USE_PIE@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LDFLAGS = @LDFLAGS@ -LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ -LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ -LIBCOMPAT = @LIBCOMPAT@ -LIBCRYPT = @LIBCRYPT@ -LIBDL = @LIBDL@ -LIBJPEG = @LIBJPEG@ -LIBOBJS = @LIBOBJS@ -LIBPNG = @LIBPNG@ -LIBPTHREAD = @LIBPTHREAD@ -LIBRESOLV = @LIBRESOLV@ -LIBS = @LIBS@ -LIBSM = @LIBSM@ -LIBSOCKET = @LIBSOCKET@ -LIBTOOL = @LIBTOOL@ -LIBUCB = @LIBUCB@ -LIBUTIL = @LIBUTIL@ -LIBZ = @LIBZ@ -LIB_KAB = @LIB_KAB@ -LIB_KABC = @LIB_KABC@ -LIB_KDECORE = @LIB_KDECORE@ -LIB_KDED = @LIB_KDED@ -LIB_KDEPIM = @LIB_KDEPIM@ -LIB_KDEPRINT = @LIB_KDEPRINT@ -LIB_KDEUI = @LIB_KDEUI@ -LIB_KDNSSD = @LIB_KDNSSD@ -LIB_KFILE = @LIB_KFILE@ -LIB_KFM = @LIB_KFM@ -LIB_KHTML = @LIB_KHTML@ -LIB_KIMPROXY = @LIB_KIMPROXY@ -LIB_KIO = @LIB_KIO@ -LIB_KJS = @LIB_KJS@ -LIB_KNEWSTUFF = @LIB_KNEWSTUFF@ -LIB_KPARTS = @LIB_KPARTS@ -LIB_KSPELL = @LIB_KSPELL@ -LIB_KSYCOCA = @LIB_KSYCOCA@ -LIB_KUNITTEST = @LIB_KUNITTEST@ -LIB_KUTILS = @LIB_KUTILS@ -LIB_POLL = @LIB_POLL@ -LIB_QPE = @LIB_QPE@ -LIB_QT = @LIB_QT@ -LIB_SMB = @LIB_SMB@ -LIB_X11 = @LIB_X11@ -LIB_XEXT = @LIB_XEXT@ -LIB_XRENDER = @LIB_XRENDER@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MKDIR_P = @MKDIR_P@ -MOC = @MOC@ -MSGFMT = @MSGFMT@ -NOOPT_CFLAGS = @NOOPT_CFLAGS@ -NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -PKG_CONFIG = @PKG_CONFIG@ -QTE_NORTTI = @QTE_NORTTI@ -QT_INCLUDES = @QT_INCLUDES@ -QT_LDFLAGS = @QT_LDFLAGS@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -UIC = @UIC@ -UIC_TR = @UIC_TR@ -USER_INCLUDES = @USER_INCLUDES@ -USER_LDFLAGS = @USER_LDFLAGS@ -USE_EXCEPTIONS = @USE_EXCEPTIONS@ -USE_RTTI = @USE_RTTI@ -USE_THREADS = @USE_THREADS@ -VERSION = @VERSION@ -WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ -XGETTEXT = @XGETTEXT@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_INCLUDES = @X_INCLUDES@ -X_LDFLAGS = @X_LDFLAGS@ -X_PRE_LIBS = @X_PRE_LIBS@ -X_RPATH = @X_RPATH@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -all_includes = @all_includes@ -all_libraries = @all_libraries@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_includes = @kde_includes@ -kde_kcfgdir = @kde_kcfgdir@ -kde_libraries = @kde_libraries@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_qtver = @kde_qtver@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_styledir = @kde_styledir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -kde_widgetdir = @kde_widgetdir@ -kdeinitdir = @kdeinitdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -qt_includes = @qt_includes@ -qt_libraries = @qt_libraries@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -x_includes = @x_includes@ -x_libraries = @x_libraries@ -xdg_appsdir = @xdg_appsdir@ -xdg_directorydir = @xdg_directorydir@ -xdg_menudir = @xdg_menudir@ -SUBDIRS = de en es fr -#>- all: all-recursive -#>+ 1 -all: docs-am all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -#>- @for dep in $?; do \ -#>- case '$(am__configure_deps)' in \ -#>- *$$dep*) \ -#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -#>- && exit 0; \ -#>- exit 1;; \ -#>- esac; \ -#>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu doc/Makefile -#>+ 12 - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile - cd $(top_srcdir) && perl admin/am_edit -padmin doc/Makefile.in -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic clean-libtool mostlyclean-am -#>+ 1 -clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - - -#>+ 2 -KDE_DIST=Makefile.in Makefile.am - -#>+ 2 -docs-am: - -#>+ 15 -force-reedit: - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile - cd $(top_srcdir) && perl admin/am_edit -padmin doc/Makefile.in - - -#>+ 21 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class a.out - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - rm -f a.out; \ - fi ; \ - done - - -#>+ 3 -final: - $(MAKE) all-am - -#>+ 3 -final-install: - $(MAKE) install-am - -#>+ 3 -no-final: - $(MAKE) all-am - -#>+ 3 -no-final-install: - $(MAKE) install-am - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck |