Added kmymoney

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/kmymoney@1239792 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 232 insertions, 0 deletions

diff --git a/libkdchart/KDFrameProfileSection.h b/libkdchart/KDFrameProfileSection.h
new file mode 100644
index 0000000..f1b4ac8
--- /dev/null
+++ b/libkdchart/KDFrameProfileSection.h
@@ -0,0 +1,232 @@
+/* -*- Mode: C++ -*-
+   KDChart - a multi-platform charting engine
+   */
+
+/****************************************************************************
+ ** Copyright (C) 2001-2003 Klarälvdalens Datakonsult AB.  All rights reserved.
+ **
+ ** This file is part of the KDChart library.
+ **
+ ** This file may be distributed and/or modified under the terms of the
+ ** GNU General Public License version 2 as published by the Free Software
+ ** Foundation and appearing in the file LICENSE.GPL included in the
+ ** packaging of this file.
+ **
+ ** Licensees holding valid commercial KDChart licenses may use this file in
+ ** accordance with the KDChart Commercial License Agreement provided with
+ ** the Software.
+ **
+ ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+ ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ **
+ ** See http://www.klaralvdalens-datakonsult.se/?page=products for
+ **   information about KDChart Commercial License Agreements.
+ **
+ ** Contact info@klaralvdalens-datakonsult.se if any conditions of this
+ ** licensing are not clear to you.
+ **
+ **********************************************************************/
+#ifndef __KDFRAMEPROFILESECTION__
+#define __KDFRAMEPROFILESECTION__
+
+#include <qregion.h>
+#include <qpen.h>
+#include <qdom.h>
+#include "KDChartGlobal.h"
+
+
+/**
+  Settings for one profile section of one side of the frame.
+  */
+class KDCHART_EXPORT KDFrameProfileSection
+{
+public:
+    /**
+    Profile Direction Mode: specifying whether a part of a profile looks embossed or
+    engraved in comparison to the next outer part (or to the surrounding area, resp.).
+
+    \li \c DirPlain the part of the profile is neither embossed nor engraved.
+    \li \c DirRaising the part of the profile lookes embossed from the outer part.
+    \li \c DirSinking the part of the profile lookes engraved into the outer part.
+
+    \Note Since a frame border may consist of several parts you must specify the
+    direction mode for each of these parts. This is quite different from the
+    QFrame::Shadow / QFrame::Shape schema where you would select a predefined
+    profile. KDFrame lets you specify both the number of sections used
+    to compose frame border's profile and the look of each individual
+    section by calling \c addProfileSection() multiple times.
+
+    Some commonly used profiles are allready pre-defined for your convenience,
+    \c setSimpleProfile is used to select one of them, see \c setProfile
+    for an example how to do this.
+
+    \sa addProfileSection, setProfile, setSimpleProfile, SimpleProfile
+    */
+    enum Direction { DirPlain, DirRaising, DirSinking };
+
+    /**
+    Converts the specified direction enum to a string representation.
+
+    \param dir the direction enum to convert
+    \return the string representation of the direction enum
+    */
+    static QString directionToString( Direction dir ) {
+        switch( dir ) {
+            case DirPlain:
+                return "Plain";
+            case DirRaising:
+                return "Raising";
+            case DirSinking:
+                return "Sinking";
+            default: // should not happen
+                return "Plain";
+        }
+    }
+
+
+    /**
+    Converts the specified string to a direction enum value.
+
+    \param string the string to convert
+    \return the direction enum value
+    */
+    static Direction stringToDirection( const QString& string ) {
+        if( string == "Plain" )
+            return DirPlain;
+        else if( string == "Raising" )
+            return DirRaising;
+        else if( string == "Sinking" )
+            return DirSinking;
+        else // default, should not happen
+            return DirPlain;
+    }
+
+
+
+    /**
+    Profile Curvature Mode: specifying the shape of a frame profile section.
+    (curvature setting will be ignored for \c DirPlain profiles)
+
+    \li \c CvtFlat looking like a evenly sloping surface.
+    \li \c CvtConvex looking like quarter of a torus.
+    \li \c CvtConcave looking like half of a groove.
+    */
+    enum Curvature { CvtPlain, CvtConvex, CvtConcave };
+
+    /**
+    Converts the specified curvature enum to a string representation.
+
+    \param curv the curvature enum to convert
+    \return the string representation of the curvature enum
+    */
+    static QString curvatureToString( Curvature curv ) {
+        switch( curv ) {
+            case CvtPlain:
+                return "Plain";
+            case CvtConvex:
+                return "Convex";
+            case CvtConcave:
+                return "Concave";
+            default: // should not happen
+                return "Plain";
+        }
+    }
+
+
+    /**
+    Converts the specified string to a curvature enum value.
+
+    \param string the string to convert
+    \return the curvature enum value
+    */
+    static Curvature stringToCurvature( const QString& string ) {
+        if( string == "Plain" )
+            return CvtPlain;
+        else if( string == "Convex" )
+            return CvtConvex;
+        else if( string == "Concave" )
+            return CvtConcave;
+        else // default, should not happen
+            return CvtPlain;
+    }
+
+
+    /**
+    Ctor of KDFrameProfileSection.
+
+    \Note Instead of instantiating KDFrameProfileSection yourself
+    you would normally rather call \c KDFrame::addProfileSection()
+    */
+    KDFrameProfileSection( Direction direction,
+                           Curvature curvature,
+                           int       width,
+                           QPen      pen )
+        : _direction( direction ),
+          _curvature( curvature ),
+          _width( width ),
+          _pen( pen ) {}
+
+    /**
+    Default ctor of FrameProfileSection.
+
+    \Note Instead of instantiating KDFrameProfileSection yourself,
+    you would normally rather call \c KDFrame::addProfileSection()
+    */
+    KDFrameProfileSection() {
+        _direction = DirPlain;
+        _curvature = CvtPlain;
+        _width = 1;
+        _pen = QPen( Qt::SolidLine );
+    }
+
+    /**
+    Destructor. Only defined to have it virtual.
+    */
+    virtual ~KDFrameProfileSection();
+
+    /**
+    Creates a DOM element node that represents a frame profile
+    section for use in a DOM document.
+
+    \param document the DOM document to which the node will belong
+    \param parent the parent node to which the new node will be appended
+    \param elementName the name of the new node
+    \param section the section to be represented
+    */
+    static void createFrameProfileSectionNode( QDomDocument& document,
+            QDomNode& parent,
+            const QString& elementName,
+            const KDFrameProfileSection* section );
+
+    /**
+    Reads data from a DOM element node that represents a frame
+    profile section and fills a KDFrameProfileSection object with
+    the data.
+
+    \param element the DOM element to read from
+    \param section a pointer to the frame profile section object to
+    read the data into
+    */
+    static bool readFrameProfileSectionNode( const QDomElement& element,
+            KDFrameProfileSection* section );
+
+    Direction direction() const { return _direction; }
+    Curvature curvature() const { return _curvature; }
+    int       width()     const { return _width;     }
+    QPen      pen()       const { return _pen;       }
+
+private:
+    Direction _direction;
+    Curvature _curvature;
+    int       _width;
+    QPen      _pen;
+};
+
+/**
+  Settings for all the profile sections of one side the frame.
+
+  \sa setProfile, profile
+  */
+typedef QPtrList < KDFrameProfileSection > KDFrameProfile;
+
+#endif