Added KDE3 version of ksquirrel photo manager

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/ksquirrel@1094446 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 346 insertions, 0 deletions

diff --git a/configure.in b/configure.in
new file mode 100644
index 0000000..7937ad6
--- /dev/null
+++ b/configure.in
@@ -0,0 +1,346 @@
+dnl =======================================================
+dnl FILE: ./admin/configure.in.min
+dnl =======================================================
+
+dnl    This file is part of the KDE libraries/packages
+dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
+ 
+dnl    This file is free software; you can redistribute it and/or
+dnl    modify it under the terms of the GNU Library General Public
+dnl    License as published by the Free Software Foundation; either
+dnl    version 2 of the License, or (at your option) any later version.
+ 
+dnl    This library is distributed in the hope that it will be useful,
+dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+dnl    Library General Public License for more details.
+ 
+dnl    You should have received a copy of the GNU Library General Public License
+dnl    along with this library; see the file COPYING.LIB.  If not, write to
+dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+dnl    Boston, MA 02110-1301, USA.
+
+# Original Author was Kalle@kde.org
+# I lifted it in some mater. (Stephan Kulow)
+# I used much code from Janos Farkas
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(acinclude.m4) dnl a source file from your sub dir
+
+dnl This is so we can use kde-common
+AC_CONFIG_AUX_DIR(admin)
+
+dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
+unset CDPATH
+
+dnl Checking host/target/build systems, for make, install etc.
+AC_CANONICAL_SYSTEM 
+dnl Perform program name transformation
+AC_ARG_PROGRAM
+
+dnl Automake doc recommends to do this only here. (Janos)
+AM_INIT_AUTOMAKE(ksquirrel, 0.8.0) dnl searches for some needed programs
+
+KDE_SET_PREFIX
+
+dnl generate the config header
+AM_CONFIG_HEADER(config.h) dnl at the distribution this done
+
+dnl Checks for programs.
+AC_CHECK_COMPILERS
+AC_ENABLE_SHARED(yes)
+AC_ENABLE_STATIC(no)
+KDE_PROG_LIBTOOL
+
+dnl for NLS support. Call them in this order!
+dnl WITH_NLS is for the po files
+AM_KDE_WITH_NLS
+
+KDE_USE_QT(3.3)
+AC_PATH_KDE
+dnl =======================================================
+dnl FILE: configure.in.in
+dnl =======================================================
+
+#MIN_CONFIG(3.3)
+
+dnl PACKAGE set before
+
+sq_kipi="yes"
+AC_ARG_ENABLE(kipi,
+              [AS_HELP_STRING([--disable-kipi], [don't search for KIPI plugins [default=no]])],
+              [     case "${enableval}" in
+                       yes) sq_kipi="yes" ;;
+                       no)  sq_kipi="no" ;;
+                       *)   AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;;
+                    esac]
+             )
+
+sq_kexif="yes"
+AC_ARG_ENABLE(kexif,
+              [AS_HELP_STRING([--disable-kexif], [don't search for KEXIF [default=no]])],
+              [     case "${enableval}" in
+                       yes) sq_kexif="yes" ;;
+                       no)  sq_kexif="no" ;;
+                       *)   AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;;
+                    esac]
+             )
+
+have_kpart="yes"
+AC_ARG_ENABLE(kpart,
+              [AS_HELP_STRING([--disable-kpart], [don't compile Konqueror integration (KPart object) [default=no]])],
+              [     case "${enableval}" in
+                       yes) ;;
+                       no)  have_kpart="no" ;;
+                       *)   AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;;
+                    esac]
+             )
+
+AM_CONDITIONAL(SQ_HAVE_KPART,  test x$have_kpart  = xyes)
+
+have_klconf="yes"
+AC_ARG_ENABLE(ksquirrel-libs-configurator,
+              [AS_HELP_STRING([--disable-ksquirrel-libs-configurator], [don't compile ksquirrel-libs configurator [default=no]])],
+              [     case "${enableval}" in
+                       yes) ;;
+                       no)  have_klconf="no" ;;
+                       *)   AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;;
+                    esac]
+             )
+
+AM_CONDITIONAL(SQ_HAVE_KLCONF,  test x$have_klconf  = xyes)
+
+# utime.h
+AC_CHECK_HEADER([utime.h], AC_DEFINE([HAVE_UTIME_H], [], [utime.h support]), [])
+
+PKG_CHECK_MODULES([ksquirrellibs], ksquirrellibs, [
+
+        __cppflags=$CPPFLAGS
+
+        CXXFLAGS="$ksquirrellibs_CFLAGS $CXXFLAGS"
+        CPPFLAGS="$ksquirrellibs_CFLAGS $CPPFLAGS"
+
+        AC_SUBST(ksquirrellibs_LIBS)
+
+        AC_LANG_SAVE
+        AC_LANG_CPLUSPLUS
+
+        AC_CHECK_HEADERS([ksquirrel-libs/fileio.h], [],
+                            [AC_MSG_ERROR([Ksquirrel-libs development files are not installed. Please install them first.])])
+
+        # restore language & CPPFLAGS
+        CPPFLAGS=${__cppflags}
+        AC_LANG_RESTORE
+                            ],
+                [AC_MSG_ERROR([Ksquirrel-libs development file (.pc) is not installed. Please install ksquirrel-libs first.])]
+)
+
+KDE_CHECK_HEADER(konq_operations.h, [], AC_MSG_ERROR("Header file konq_operations.h is missing. Please install libkonq-devel package."))
+KDE_CHECK_HEADER(kregexpeditorinterface.h, [AC_DEFINE([SQ_HAVE_KREGEXP], [], [kregexpeditorinterface.h support])], [])
+
+# Checks for OpenGL.
+KDE_CHECK_HEADER([GL/gl.h], [], AC_MSG_ERROR("ksquirrel needs OpenGL (GL/gl.h, ...) and GLU (GL/glu.h) headers to be installed."))
+
+AC_CHECK_LIB([GL], [glBegin], [LDFLAGS="-lGL $LDFLAGS"], [ogl="no"])
+
+if test "x$ogl" = "xno"; then
+    AC_MSG_NOTICE([Maybe libGL requires libpthread...])
+    unset ac_cv_lib_GL_glBegin
+    AC_CHECK_LIB([GL], [glBegin], [LDFLAGS="-lpthread -lGL $LDFLAGS"], AC_MSG_ERROR([Cannot use -lGL]), [-lpthread])
+fi
+
+AM_PROG_AS
+
+# MMX test duped from kdelibs/kdefx - it should be probably moved to admin/
+dnl -----------------------------------------------------
+dnl IA32 checks
+dnl -----------------------------------------------------
+
+ksquirrel_asm_defs=
+case $host_cpu in
+  i*86 )
+  AC_MSG_CHECKING(for assembler support for IA32 extensions)
+
+  dnl MMX check
+  AC_TRY_COMPILE(, [ __asm__("pxor %mm0, %mm0") ],
+  [
+    echo $ECHO_N "MMX yes$ECHO_C"
+    AC_DEFINE_UNQUOTED(HAVE_X86_MMX, 1, [Define to 1 if the assembler supports MMX instructions.])
+    ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_MMX"
+  ], [ echo $ECHO_N "MMX no$ECHO_C" ])
+
+  dnl SSE check
+  AC_TRY_COMPILE(,[ __asm__("xorps %xmm0, %xmm0") ],
+  [
+    echo $ECHO_N ", SSE yes$ECHO_C"
+    AC_DEFINE_UNQUOTED(HAVE_X86_SSE, 1, [Define to 1 if the assembler supports SSE instructions.])
+    ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_SSE"
+  ], [ echo $ECHO_N ", SSE no$ECHO_C" ])
+
+  dnl SSE2 check
+  AC_TRY_COMPILE(, [ __asm__("xorpd %xmm0, %xmm0") ],
+  [
+    echo $ECHO_N ", SSE2 yes$ECHO_C"
+    AC_DEFINE_UNQUOTED(HAVE_X86_SSE2, 1, [Define to 1 if the assembler supports SSE2 instructions.])
+    ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_SSE2"
+  ], [ echo $ECHO_N ", SSE2 no$ECHO_C" ])
+
+  dnl 3DNOW check
+  AC_TRY_COMPILE(, [ __asm__("femms") ],
+  [
+    echo $ECHO_N ", 3DNOW yes$ECHO_C"
+    AC_DEFINE_UNQUOTED(HAVE_X86_3DNOW, 1, [Define to 1 if the assembler supports 3DNOW instructions.])
+    ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_3DNOW"
+  ], [ echo $ECHO_N ", 3DNOW no$ECHO_C" ])
+  echo
+  ;;
+  powerpc )
+  AC_MSG_CHECKING(for assembler support for AltiVec instructions)
+  dnl AltiVec check
+  AC_TRY_COMPILE(, [ __asm__("mtspr 256, %0\n\t" "vand %%v0, %%v0, %%v0" : : "r"(-1) ) ],
+  [
+    echo $ECHO_N " yes$ECHO_C"
+    AC_DEFINE_UNQUOTED(HAVE_PPC_ALTIVEC, 1, [Define to 1 if the assembler supports AltiVec instructions.])
+    ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_PPC_ALTIVEC"
+  ], [ echo $ECHO_N ", AltiVec no$ECHO_C" ])
+  echo
+  ;;
+esac
+
+KSQUIRREL_ASM_DEFS="$ksquirrel_asm_defs"
+AC_SUBST(KSQUIRREL_ASM_DEFS)
+
+#
+# KIPI
+#
+have_kipi=no
+if test x$sq_kipi = xyes; then
+PKG_CHECK_MODULES([libkipi], libkipi, [
+        _cxxflags=$CXXFLAGS
+        _ldflags=$LDFLAGS
+                                
+        CXXFLAGS="$libkipi_CFLAGS $CXXFLAGS"
+        LDFLAGS="$LDFLAGS $libkipi_LIBS"
+
+        KDE_CHECK_HEADER(libkipi/interface.h, have_kipi=yes, have_kipi=no)
+          if test "$have_kipi" = "yes"; then
+        	AC_DEFINE(SQ_HAVE_KIPI, [], [If we have libkipi installed])
+          else
+            AC_WARN([Can't find KIPI headers, KSquirrel won't be compiled with KIPI support])
+          fi
+
+            CXXFLAGS=$_cxxflags
+            LDFLAGS=$_ldflags
+    ],
+        [AC_WARN([KIPI development file (.pc) was not found. KIPI support will be disabled.])]
+)
+fi
+
+#
+# KEXIF
+#
+have_kexif=no
+if test x$sq_kexif = xyes; then
+PKG_CHECK_MODULES([libkexif], libkexif, [
+        _cxxflags=$CXXFLAGS
+        _ldflags=$LDFLAGS
+
+        CXXFLAGS="$libkexif_CFLAGS $CXXFLAGS"
+        LDFLAGS="$LDFLAGS $libkexif_LIBS"
+
+        KDE_CHECK_HEADER(libkexif/kexifdata.h, have_kexif=yes, have_kexif=no)
+          if test "$have_kexif" = "yes"; then
+                AC_DEFINE(SQ_HAVE_KEXIF, [], [If we have libkexif installed])
+          else
+            AC_WARN([Can't find KEXIF headers, KSquirrel won't be compiled with KEXIF support])
+          fi
+
+            CXXFLAGS=$_cxxflags
+            LDFLAGS=$_ldflags
+    ],
+        [AC_WARN([KEXIF development file (.pc) was not found. KEXIF support will be disabled.])]
+)
+fi
+
+AM_CONDITIONAL(SQ_HAVE_KIPI,  test x$have_kipi  = xyes)
+AM_CONDITIONAL(SQ_HAVE_KEXIF, test x$have_kexif = xyes)
+KDE_CREATE_SUBDIRSLIST
+AC_CONFIG_FILES([ Makefile ])
+AC_CONFIG_FILES([ doc/Makefile ])
+AC_CONFIG_FILES([ doc/ru/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/imageedit/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/ksquirrel-libs-configurator/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/ksquirrelpart/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/mime/Makefile ])
+AC_CONFIG_FILES([ ksquirrel/sidebar/Makefile ])
+AC_CONFIG_FILES([ pics/Makefile ])
+AC_CONFIG_FILES([ pics/imageedit/Makefile ])
+AC_CONFIG_FILES([ pics/menu/Makefile ])
+AC_CONFIG_FILES([ pics/toolbar/Makefile ])
+AC_CONFIG_FILES([ po/Makefile ])
+AC_OUTPUT
+echo
+echo "Results:"
+echo "--------"
+echo 
+echo "Version:                         ${VERSION}"
+echo "KPart object:                    $have_kpart"
+echo "ksquirrel-libs configurator:     $have_klconf"
+echo
+echo "C   compiler:     ${CC}"
+echo "C++ compiler:     ${CXX}"
+echo "CXXFLAGS:         ${CXXFLAGS}"
+echo 
+echo "Prefix:           ${prefix}"
+echo "KDE prefix:       ${kde_libs_prefix}"
+echo 
+echo "KIPI  support:    ${have_kipi}"
+echo "KEXIF support:    ${have_kexif}"
+echo "ASM flags:        ${KSQUIRREL_ASM_DEFS}"
+# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
+if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
+  # And if so, warn when they don't match
+  if test "$kde_libs_prefix" != "$given_prefix"; then
+    # And if kde doesn't know about the prefix yet
+    echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
+    if test $? -ne 0; then
+      echo ""
+      echo "Warning: you chose to install this package in $given_prefix,"
+      echo "but KDE was found in $kde_libs_prefix."
+      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
+      echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
+      echo "Then restart KDE."
+      echo ""
+    fi
+  fi
+fi
+
+if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
+  echo ""
+  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
+  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
+  echo ""
+  echo "For better performance, consider including the Qt visibility supporting patch"
+  echo "located at:"
+  echo ""
+  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
+  echo ""
+  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
+  echo "everything will continue to work just fine without it."
+  echo ""
+fi
+
+if test "$all_tests" = "bad"; then
+  if test ! "$cache_file" = "/dev/null"; then
+    echo ""
+    echo "Please remove the file $cache_file after changing your setup"
+    echo "so that configure will find the changes next time."
+    echo ""
+  fi
+else
+  echo ""
+  echo "Good - your configure finished. Start make now"
+  echo ""
+fi