diff options
| -rw-r--r-- | CMakeL10n.txt | 23 | ||||
| -rw-r--r-- | po/ktechlab.pot | 4106 | ||||
| -rw-r--r-- | src/CMakeL10n.txt | 3 |
3 files changed, 4132 insertions, 0 deletions
diff --git a/CMakeL10n.txt b/CMakeL10n.txt new file mode 100644 index 0000000..9730a56 --- /dev/null +++ b/CMakeL10n.txt @@ -0,0 +1,23 @@ +################################################# +# +# (C) 2019 Slávek Banko +# slavek.banko (AT) axis.cz +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +cmake_minimum_required( VERSION 2.8 ) + + +##### include our cmake modules ################# + +set( CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake/modules" ) +include( TDEL10n ) + + +##### create translation templates ############## + +tde_l10n_auto_add_subdirectories( ) diff --git a/po/ktechlab.pot b/po/ktechlab.pot new file mode 100644 index 0000000..c0bfd5d --- /dev/null +++ b/po/ktechlab.pot @@ -0,0 +1,4106 @@ +# SOME DESCRIPTIVE TITLE. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"POT-Creation-Date: 2019-01-06 17:03+0100\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" + +#: circuitdocument.cpp:39 +msgid "Orientation" +msgstr "" + +#: circuitdocument.cpp:43 +msgid "" +"*.circuit|Circuit(*.circuit)\n" +"*|All Files" +msgstr "" + +#: circuitdocument.cpp:754 +msgid "No components were found in the selection." +msgstr "" + +#: circuitdocument.cpp:762 +msgid "No External Connection components were found in the selection." +msgstr "" + +#: circuitview.cpp:31 +msgid "0 Degrees" +msgstr "" + +#: circuitview.cpp:34 +msgid "90 Degrees" +msgstr "" + +#: circuitview.cpp:36 +msgid "180 Degrees" +msgstr "" + +#: circuitview.cpp:38 +msgid "270 Degrees" +msgstr "" + +#: circuitview.cpp:41 +msgid "Create Subcircuit" +msgstr "" + +#: circuitview.cpp:42 +msgid "Rotate Clockwise" +msgstr "" + +#: circuitview.cpp:43 +msgid "Rotate Counter-Clockwise" +msgstr "" + +#: circuitview.cpp:44 +msgid "Flip" +msgstr "" + +#: circuitview.cpp:51 +msgid "" +"Construct a circuit by dragging components from the Component selector from " +"the left. Create the connections by dragging a wire from the component " +"connectors.<br><br>The simulation is running by default, but can be paused " +"and resumed from the Tools menu.<br><br>To delete a wire, select it with a " +"select box, and hit delete.<br><br>To edit the attributes of a component, " +"select it (making sure that no components of another type are also " +"selected), and edit in the toolbar. More advanced properties can be edited " +"using the item editor on the right.<br><br>Subcircuits can be created by " +"connecting the components with an External Connection, selecting the desired " +"components and clicking on \"Create Subcircuit\" in the right-click menu." +msgstr "" + +#: circuitview.cpp:79 +msgid "Simulation Running" +msgstr "" + +#: circuitview.cpp:79 +msgid "Simulation Paused" +msgstr "" + +#: core/main.cpp:21 +msgid "An IDE for microcontrollers and electronics" +msgstr "" + +#: core/main.cpp:27 +msgid "Document to open." +msgstr "" + +#: core/main.cpp:34 +msgid "KTechlab" +msgstr "" + +#: docmanager.cpp:102 +msgid "Could not open '%1'" +msgstr "" + +#: docmanager.cpp:169 +msgid "Untitled (Circuit %1)" +msgstr "" + +#: docmanager.cpp:171 +msgid "Untitled (Circuit)" +msgstr "" + +#: docmanager.cpp:178 +msgid "Untitled (FlowCode %1)" +msgstr "" + +#: docmanager.cpp:180 +msgid "Untitled (FlowCode)" +msgstr "" + +#: docmanager.cpp:187 +msgid "Untitled (Mechanics %1)" +msgstr "" + +#: docmanager.cpp:189 +msgid "Untitled (Mechanics)" +msgstr "" + +#: docmanager.cpp:196 +msgid "Untitled (%1)" +msgstr "" + +#: docmanager.cpp:198 view.cpp:208 +msgid "Untitled" +msgstr "" + +#: docmanager.cpp:434 +msgid "Could not open Circuit file \"%1\"" +msgstr "" + +#: docmanager.cpp:451 +msgid "Could not open FlowCode file \"%1\"" +msgstr "" + +#: docmanager.cpp:468 +msgid "Could not open Mechanics file \"%1\"" +msgstr "" + +#: docmanager.cpp:489 +msgid "Could not open text file \"%1\"" +msgstr "" + +#: document.cpp:105 +msgid "Save Location" +msgstr "" + +#: document.cpp:113 itemdocument.cpp:823 +msgid "" +"A file named \"%1\" already exists. Are you sure you want to overwrite it?" +msgstr "" + +#: document.cpp:114 itemdocument.cpp:823 +msgid "Overwrite File?" +msgstr "" + +#: document.cpp:115 itemdocument.cpp:823 +msgid "Overwrite" +msgstr "" + +#: document.cpp:138 +msgid "" +"The document '%1' has been modified.\n" +"Do you want to save it?" +msgstr "" + +#: document.cpp:139 +msgid "Save Document?" +msgstr "" + +#: document.cpp:140 ktechlab.cpp:823 +msgid "Save" +msgstr "" + +#: document.cpp:141 +msgid "Discard" +msgstr "" + +#: drawparts/dpline.cpp:32 drawparts/dpline.cpp:43 itemview.cpp:69 +msgid "Line" +msgstr "" + +#: drawparts/dpline.cpp:33 drawparts/dpline.cpp:161 drawparts/dptext.cpp:33 +#: drawparts/solidshape.cpp:32 drawparts/solidshape.cpp:150 +msgid "Other" +msgstr "" + +#: drawparts/dpline.cpp:44 +msgid "Select the line to position the end points" +msgstr "" + +#: drawparts/dpline.cpp:47 drawparts/solidshape.cpp:56 +msgid "Line Color" +msgstr "" + +#: drawparts/dpline.cpp:51 drawparts/solidshape.cpp:60 +msgid "Line Width" +msgstr "" + +#: drawparts/dpline.cpp:57 +msgid "Line Style" +msgstr "" + +#: drawparts/dpline.cpp:62 +msgid "Cap Style" +msgstr "" + +#: drawparts/dpline.cpp:160 drawparts/dpline.cpp:170 itemview.cpp:70 +msgid "Arrow" +msgstr "" + +#: drawparts/dptext.cpp:32 +msgid "Canvas Text" +msgstr "" + +#: drawparts/dptext.cpp:43 drawparts/dptext.cpp:47 itemview.cpp:68 +msgid "Text" +msgstr "" + +#: drawparts/dptext.cpp:44 +msgid "Doubleclick the Text Item to set the text" +msgstr "" + +#: drawparts/dptext.cpp:51 drawparts/solidshape.cpp:46 +msgid "Display Background" +msgstr "" + +#: drawparts/dptext.cpp:56 drawparts/solidshape.cpp:51 +msgid "Background Color" +msgstr "" + +#: drawparts/dptext.cpp:61 +msgid "Frame Color" +msgstr "" + +#: drawparts/dptext.cpp:66 +msgid "Text Color" +msgstr "" + +#: drawparts/drawpart.cpp:211 +msgid "Solid" +msgstr "" + +#: drawparts/drawpart.cpp:213 drawparts/drawpart.cpp:229 +msgid "None" +msgstr "" + +#: drawparts/drawpart.cpp:215 drawparts/drawpart.cpp:231 +msgid "Dash" +msgstr "" + +#: drawparts/drawpart.cpp:217 drawparts/drawpart.cpp:233 +msgid "Dot" +msgstr "" + +#: drawparts/drawpart.cpp:219 drawparts/drawpart.cpp:235 +msgid "Dash Dot" +msgstr "" + +#: drawparts/drawpart.cpp:221 drawparts/drawpart.cpp:237 +msgid "Dash Dot Dot" +msgstr "" + +#: drawparts/drawpart.cpp:246 +msgid "Flat" +msgstr "" + +#: drawparts/drawpart.cpp:248 drawparts/drawpart.cpp:258 +msgid "Square" +msgstr "" + +#: drawparts/drawpart.cpp:250 drawparts/drawpart.cpp:260 +msgid "Round" +msgstr "" + +#: drawparts/solidshape.cpp:31 drawparts/solidshape.cpp:42 itemview.cpp:72 +msgid "Rectangle" +msgstr "" + +#: drawparts/solidshape.cpp:149 drawparts/solidshape.cpp:159 itemview.cpp:71 +msgid "Ellipse" +msgstr "" + +#: electronics/components/addac.cpp:39 +msgid "Analog-Digital" +msgstr "" + +#: electronics/components/addac.cpp:40 electronics/components/addac.cpp:53 +#: electronics/components/binarycounter.cpp:31 +#: electronics/components/demultiplexer.cpp:31 +#: electronics/components/ec555.cpp:32 +#: electronics/components/ecbcdto7segment.cpp:48 +#: electronics/components/ecopamp.cpp:30 +#: electronics/components/flipflop.cpp:34 +#: electronics/components/flipflop.cpp:146 +#: electronics/components/flipflop.cpp:248 +#: electronics/components/fulladder.cpp:30 +#: electronics/components/magnitudecomparator.cpp:28 +#: electronics/components/matrixdisplaydriver.cpp:304 +#: electronics/components/multiplexer.cpp:31 +#: electronics/components/piccomponent.cpp:55 +#: electronics/components/ram.cpp:29 +msgid "Integrated Circuits" +msgstr "" + +#: electronics/components/addac.cpp:52 +msgid "Digital-Analog" +msgstr "" + +#: electronics/components/addac.cpp:69 +msgid "Number Bits" +msgstr "" + +#: electronics/components/addac.cpp:75 +msgid "Input Range" +msgstr "" + +#: electronics/components/addac.cpp:102 +msgid "ADC" +msgstr "" + +#: electronics/components/addac.cpp:103 +msgid "Converts an analog signal into a digital output." +msgstr "" + +#: electronics/components/addac.cpp:198 +msgid "DAC" +msgstr "" + +#: electronics/components/addac.cpp:199 +msgid "Converts a digital input to an analog output signal." +msgstr "" + +#: electronics/components/bidirled.cpp:31 +#: electronics/components/bidirled.cpp:42 +msgid "Bidirectional LED" +msgstr "" + +#: electronics/components/bidirled.cpp:32 electronics/components/ecled.cpp:31 +#: electronics/components/ecsevensegment.cpp:33 +#: electronics/components/ecsignallamp.cpp:31 +#: electronics/components/matrixdisplay.cpp:35 +#: electronics/components/meter.cpp:156 electronics/components/meter.cpp:196 +#: electronics/components/meter.cpp:239 electronics/components/probe.cpp:138 +#: electronics/components/probe.cpp:181 electronics/components/probe.cpp:228 +msgid "Outputs" +msgstr "" + +#: electronics/components/bidirled.cpp:43 +msgid "Bidrectional Light Emitting Diode" +msgstr "" + +#: electronics/components/bidirled.cpp:60 +msgid "Color 1" +msgstr "" + +#: electronics/components/bidirled.cpp:64 +msgid "Colour 2" +msgstr "" + +#: electronics/components/binarycounter.cpp:30 +#: electronics/components/binarycounter.cpp:41 +msgid "Binary Counter" +msgstr "" + +#: electronics/components/binarycounter.cpp:42 +msgid "" +"Holds an internal count, which changes when the clock input <i>></i> pin " +"is pulsed.<br><br>Normal operation: <i>en</i> (Enable) and <i>u/d</i> " +"(Up/Down) are held high, <i>r</i> (Reset) is low." +msgstr "" + +#: electronics/components/binarycounter.cpp:58 +msgid "Trigger Edge" +msgstr "" + +#: electronics/components/binarycounter.cpp:63 +msgid "Bit Count" +msgstr "" + +#: electronics/components/bussplitter.cpp:29 +msgid "Bus" +msgstr "" + +#: electronics/components/bussplitter.cpp:30 +#: electronics/components/externalconnection.cpp:27 +#: electronics/components/parallelportcomponent.cpp:37 +#: electronics/components/serialportcomponent.cpp:37 +msgid "Connections" +msgstr "" + +#: electronics/components/bussplitter.cpp:43 +msgid "Bus Splitter" +msgstr "" + +#: electronics/components/bussplitter.cpp:44 +msgid "Merges several connections into one." +msgstr "" + +#: electronics/components/bussplitter.cpp:51 +msgid "Size" +msgstr "" + +#: electronics/components/demultiplexer.cpp:30 +#: electronics/components/demultiplexer.cpp:41 +msgid "Demultiplexer" +msgstr "" + +#: electronics/components/demultiplexer.cpp:42 +msgid "" +"Seperates the input data stream into components. The value of the input is " +"passed to the \"X\" output selected by the binary number given by the \"A\" " +"inputs." +msgstr "" + +#: electronics/components/demultiplexer.cpp:47 +#: electronics/components/multiplexer.cpp:47 electronics/components/ram.cpp:56 +msgid "Address Size" +msgstr "" + +#: electronics/components/dependentsource.cpp:34 +msgid "Gain" +msgstr "" + +#: electronics/components/dependentsource.cpp:131 +msgid "CCCS" +msgstr "" + +#: electronics/components/dependentsource.cpp:132 +#: electronics/components/dependentsource.cpp:182 +#: electronics/components/dependentsource.cpp:231 +#: electronics/components/dependentsource.cpp:280 +#: electronics/components/eccurrentsignal.cpp:31 +#: electronics/components/eccurrentsource.cpp:31 +#: electronics/components/ecfixedvoltage.cpp:29 +#: electronics/components/ecground.cpp:29 +#: electronics/components/ecvoltagesignal.cpp:33 +#: electronics/components/ecvoltagesource.cpp:35 +msgid "Sources" +msgstr "" + +#: electronics/components/dependentsource.cpp:141 +msgid "Current Controlled Currrent Source" +msgstr "" + +#: electronics/components/dependentsource.cpp:181 +msgid "CCVS" +msgstr "" + +#: electronics/components/dependentsource.cpp:191 +msgid "Current Controlled Voltage Source" +msgstr "" + +#: electronics/components/dependentsource.cpp:230 +msgid "VCCS" +msgstr "" + +#: electronics/components/dependentsource.cpp:240 +msgid "Voltage Controlled Current Source" +msgstr "" + +#: electronics/components/dependentsource.cpp:279 +msgid "VCVS" +msgstr "" + +#: electronics/components/dependentsource.cpp:289 +msgid "Voltage Controlled Voltage Source" +msgstr "" + +#: electronics/components/discretelogic.cpp:34 +#: electronics/components/discretelogic.cpp:44 +msgid "Inverter" +msgstr "" + +#: electronics/components/discretelogic.cpp:35 +#: electronics/components/discretelogic.cpp:98 +#: electronics/components/discretelogic.cpp:160 +#: electronics/components/discretelogic.cpp:229 +#: electronics/components/ecclockinput.cpp:37 +#: electronics/components/multiinputgate.cpp:149 +#: electronics/components/multiinputgate.cpp:221 +#: electronics/components/multiinputgate.cpp:291 +#: electronics/components/multiinputgate.cpp:362 +#: electronics/components/multiinputgate.cpp:433 +#: electronics/components/multiinputgate.cpp:489 +#: gui/logicwidget.ui:16 gui/settingsdlg.cpp:61 +#, no-c-format +msgid "Logic" +msgstr "" + +#: electronics/components/discretelogic.cpp:45 +msgid "The output is the logical inverse of the logic-input state." +msgstr "" + +#: electronics/components/discretelogic.cpp:97 +#: electronics/components/discretelogic.cpp:107 +msgid "Buffer" +msgstr "" + +#: electronics/components/discretelogic.cpp:108 +msgid "" +"Cleans the logic input, with the output high or low depending on input " +"trigger levels." +msgstr "" + +#: electronics/components/discretelogic.cpp:159 +#: electronics/components/discretelogic.cpp:169 +msgid "Logic Input" +msgstr "" + +#: electronics/components/discretelogic.cpp:170 +msgid "" +"Provides a user-adjustable logic state.<br><br>Click to pulse high, or drag " +"the mouse off to keep the output high." +msgstr "" + +#: electronics/components/discretelogic.cpp:178 +msgid "Use Toggle" +msgstr "" + +#: electronics/components/discretelogic.cpp:228 +#: electronics/components/discretelogic.cpp:238 +msgid "Logic Output" +msgstr "" + +#: electronics/components/discretelogic.cpp:239 +msgid "Shows the logic-state of the input." +msgstr "" + +#: electronics/components/ec555.cpp:31 electronics/components/ec555.cpp:42 +msgid "555" +msgstr "" + +#: electronics/components/ec555.cpp:43 +msgid "Common timer IC" +msgstr "" + +#: electronics/components/ecbcdto7segment.cpp:47 +msgid "BCD to 7 Segment" +msgstr "" + +#: electronics/components/ecbcdto7segment.cpp:58 +msgid "BCD to Seven Segment" +msgstr "" + +#: electronics/components/ecbcdto7segment.cpp:59 +msgid "" +"Converts a binary-coded-input to a form displayable by a seven segment " +"display.<br><br>Normal operation: <i>lt</i> (Lamp Test) and the <i>rb</i> " +"(Ripple Blanking) are held high, <i>en</i> (Enable) is held low." +msgstr "" + +#: electronics/components/ecbjt.cpp:36 +msgid "NPN" +msgstr "" + +#: electronics/components/ecbjt.cpp:37 electronics/components/ecbjt.cpp:49 +#: electronics/components/eccapacitor.cpp:29 +#: electronics/components/ecdiode.cpp:29 +#: electronics/components/ecpotentiometer.cpp:31 +#: electronics/components/ecresistor.cpp:29 +#: electronics/components/inductor.cpp:28 +#: electronics/components/resistordip.cpp:30 +msgid "Discrete" +msgstr "" + +#: electronics/components/ecbjt.cpp:48 +msgid "PNP" +msgstr "" + +#: electronics/components/ecbjt.cpp:61 +msgid "NPN Transistor" +msgstr "" + +#: electronics/components/ecbjt.cpp:63 +msgid "PNP Transistor" +msgstr "" + +#: electronics/components/ecbjt.cpp:79 +msgid "Forward Coefficient" +msgstr "" + +#: electronics/components/ecbjt.cpp:86 +msgid "Reverse Coefficient" +msgstr "" + +#: electronics/components/ecbjt.cpp:93 +msgid "Forward Beta" +msgstr "" + +#: electronics/components/ecbjt.cpp:100 +msgid "Reverse Beta" +msgstr "" + +#: electronics/components/eccapacitor.cpp:28 +#: electronics/components/eccapacitor.cpp:39 +msgid "Capacitor" +msgstr "" + +#: electronics/components/eccapacitor.cpp:40 +msgid "" +"Stores electrical charge.<br><br>The voltage across the capacitor and " +"capacitance are related by <i>Charge = Capacitance x Voltage</i>." +msgstr "" + +#: electronics/components/eccapacitor.cpp:50 +msgid "Capacitance" +msgstr "" + +#: electronics/components/ecclockinput.cpp:36 +#: electronics/components/ecclockinput.cpp:46 +msgid "Clock Input" +msgstr "" + +#: electronics/components/ecclockinput.cpp:47 +msgid "" +"A square-wave generator, outputing logical high/low at repeating time " +"intervals." +msgstr "" + +#: electronics/components/ecclockinput.cpp:69 +msgid "Low Time" +msgstr "" + +#: electronics/components/ecclockinput.cpp:75 flowparts/pulse.cpp:49 +#: flowparts/pulse.cpp:54 +msgid "High Time" +msgstr "" + +#: electronics/components/eccurrentsignal.cpp:30 +#: electronics/components/eccurrentsignal.cpp:40 +msgid "Current Signal" +msgstr "" + +#: electronics/components/eccurrentsignal.cpp:41 +msgid "Provides a variety of current signals" +msgstr "" + +#: electronics/components/eccurrentsignal.cpp:52 +#: electronics/components/ecvoltagesignal.cpp:54 +msgid "Frequency" +msgstr "" + +#: electronics/components/eccurrentsignal.cpp:59 +msgid "Current Range" +msgstr "" + +#: electronics/components/eccurrentsource.cpp:30 +#: electronics/components/eccurrentsource.cpp:40 +msgid "Current Source" +msgstr "" + +#: electronics/components/eccurrentsource.cpp:41 +msgid "Provides a fixed current source." +msgstr "" + +#: electronics/components/eccurrentsource.cpp:51 +msgid "Current" +msgstr "" + +#: electronics/components/ecdiode.cpp:28 electronics/components/ecdiode.cpp:38 +msgid "Diode" +msgstr "" + +#: electronics/components/ecdiode.cpp:39 +msgid "" +"Allows current to flow in the direction indicated by the arrow when a " +"certain voltage difference has been reached." +msgstr "" + +#: electronics/components/ecdiode.cpp:59 +msgid "Emission Coefficient" +msgstr "" + +#: electronics/components/ecdiode.cpp:66 +msgid "Breakdown Voltage" +msgstr "" + +#: electronics/components/ecfixedvoltage.cpp:28 +#: electronics/components/ecfixedvoltage.cpp:38 +msgid "Fixed Voltage" +msgstr "" + +#: electronics/components/ecfixedvoltage.cpp:39 +msgid "Provides a fixed voltage point to connect components to." +msgstr "" + +#: electronics/components/ecfixedvoltage.cpp:49 +#: electronics/components/ecvoltagesource.cpp:57 +msgid "Voltage" +msgstr "" + +#: electronics/components/ecground.cpp:28 +msgid "Ground (0V)" +msgstr "" + +#: electronics/components/ecground.cpp:38 +msgid "Ground" +msgstr "" + +#: electronics/components/ecground.cpp:39 +msgid "Ground (0V) point" +msgstr "" + +#: electronics/components/eckeypad.cpp:28 +#: electronics/components/eckeypad.cpp:44 flowparts/keypad.cpp:27 +#: flowparts/keypad.cpp:38 +msgid "Keypad" +msgstr "" + +#: electronics/components/eckeypad.cpp:29 +#: electronics/components/pushswitch.cpp:33 +#: electronics/components/pushswitch.cpp:125 +#: electronics/components/rotoswitch.cpp:36 +#: electronics/components/toggleswitch.cpp:32 +#: electronics/components/toggleswitch.cpp:138 +#: electronics/components/toggleswitch.cpp:234 +#: electronics/components/toggleswitch.cpp:329 +msgid "Switches" +msgstr "" + +#: electronics/components/eckeypad.cpp:45 +msgid "" +"Provides a numeric array of Push-to-Make switches, with 4 rows and a " +"configurable number of columns." +msgstr "" + +#: electronics/components/eckeypad.cpp:48 +msgid "Use Toggles" +msgstr "" + +#: electronics/components/eckeypad.cpp:52 +#: electronics/components/matrixdisplay.cpp:69 +msgid "Columns" +msgstr "" + +#: electronics/components/ecled.cpp:30 electronics/components/ecled.cpp:42 +msgid "LED" +msgstr "" + +#: electronics/components/ecled.cpp:43 +msgid "Light Emitting Diode" +msgstr "" + +#: electronics/components/ecled.cpp:51 +#: electronics/components/ecsevensegment.cpp:49 +#: electronics/components/matrixdisplay.cpp:75 +#: electronics/components/probe.cpp:32 +msgid "Color" +msgstr "" + +#: electronics/components/ecopamp.cpp:29 +msgid "Op Amp" +msgstr "" + +#: electronics/components/ecopamp.cpp:40 +msgid "Operational Amplifier" +msgstr "" + +#: electronics/components/ecopamp.cpp:41 +msgid "Ideal amplifier" +msgstr "" + +#: electronics/components/ecpotentiometer.cpp:30 +#: electronics/components/ecpotentiometer.cpp:40 +msgid "Potentiometer" +msgstr "" + +#: electronics/components/ecpotentiometer.cpp:41 +msgid "" +"Consists of a resistor connected to the end pins, with a central pin " +"connected at an adjustable point along the resistor" +msgstr "" + +#: electronics/components/ecpotentiometer.cpp:55 +#: electronics/components/ecresistor.cpp:47 +#: electronics/components/resistordip.cpp:48 +msgid "Resistance" +msgstr "" + +#: electronics/components/ecresistor.cpp:28 +#: electronics/components/ecresistor.cpp:38 +msgid "Resistor" +msgstr "" + +#: electronics/components/ecresistor.cpp:39 +msgid "Limits the flow of current, obeying Ohms Law" +msgstr "" + +#: electronics/components/ecsevensegment.cpp:32 flowparts/sevenseg.cpp:28 +#: gui/newpinmappingwidget.ui:99 +#, no-c-format +msgid "Seven Segment" +msgstr "" + +#: electronics/components/ecsevensegment.cpp:42 +msgid "Seven Segment LED" +msgstr "" + +#: electronics/components/ecsevensegment.cpp:43 +msgid "" +"A seven segment display with a decimal point. This can be configured to " +"either have a common cathode or a common anode." +msgstr "" + +#: electronics/components/ecsevensegment.cpp:53 +#: electronics/components/matrixdisplay.cpp:79 +#: electronics/components/matrixdisplaydriver.cpp:321 +msgid "Configuration" +msgstr "" + +#: electronics/components/ecsignallamp.cpp:30 +#: electronics/components/ecsignallamp.cpp:40 +msgid "Signal Lamp" +msgstr "" + +#: electronics/components/ecsignallamp.cpp:41 +msgid "A simple filament signal lamp, with a 100 ohms series resistance." +msgstr "" + +#: electronics/components/ecsubcircuit.cpp:41 +msgid "Subcircuit" +msgstr "" + +#: electronics/components/ecvoltagesignal.cpp:32 +#: electronics/components/ecvoltagesignal.cpp:42 +msgid "Voltage Signal" +msgstr "" + +#: electronics/components/ecvoltagesignal.cpp:43 +msgid "Provides a variety of voltage signals." +msgstr "" + +#: electronics/components/ecvoltagesignal.cpp:61 +msgid "Voltage Range" +msgstr "" + +#: electronics/components/ecvoltagesource.cpp:34 +#: electronics/components/ecvoltagesource.cpp:44 +msgid "Battery" +msgstr "" + +#: electronics/components/ecvoltagesource.cpp:45 +msgid "Provides a potential-difference." +msgstr "" + +#: electronics/components/externalconnection.cpp:26 +#: electronics/components/externalconnection.cpp:36 +msgid "External Connection" +msgstr "" + +#: electronics/components/externalconnection.cpp:37 +msgid "" +"Point to connect the circuit to an external entity - e.g. a mechanical " +"component or as part of a subcircuit." +msgstr "" + +#: electronics/components/externalconnection.cpp:41 +#: gui/microsettingsdlg.cpp:306 gui/settingsdlg.cpp:235 +#: gui/symbolviewer.cpp:97 +msgid "Name" +msgstr "" + +#: electronics/components/flipflop.cpp:33 +msgid "D Flip-Flop" +msgstr "" + +#: electronics/components/flipflop.cpp:43 +msgid "D-Type Flip-Flop" +msgstr "" + +#: electronics/components/flipflop.cpp:44 +msgid "The output state is set from the input state when the clock is pulsed." +msgstr "" + +#: electronics/components/flipflop.cpp:145 +msgid "JK Flip-Flop" +msgstr "" + +#: electronics/components/flipflop.cpp:155 +msgid "JK-Type Flip-Flop" +msgstr "" + +#: electronics/components/flipflop.cpp:156 +msgid "The output state is set according to J and K when the clock is pulsed." +msgstr "" + +#: electronics/components/flipflop.cpp:247 +#: electronics/components/flipflop.cpp:257 +msgid "SR Flip-Flop" +msgstr "" + +#: electronics/components/flipflop.cpp:258 +msgid "" +"The output is made high by holding <i>set</i> high, and low by holding " +"<i>reset</i> high." +msgstr "" + +#: electronics/components/fulladder.cpp:29 +#: electronics/components/fulladder.cpp:40 +msgid "Adder" +msgstr "" + +#: electronics/components/inductor.cpp:27 +#: electronics/components/inductor.cpp:38 +msgid "Inductor" +msgstr "" + +#: electronics/components/inductor.cpp:49 +msgid "Inductance" +msgstr "" + +#: electronics/components/magnitudecomparator.cpp:27 +#: electronics/components/magnitudecomparator.cpp:38 +msgid "Magnitude Comparator" +msgstr "" + +#: electronics/components/magnitudecomparator.cpp:40 +msgid "" +"Compares two binary numbers and generates output to indicate which binary " +"number has the greater magnitude. It has 3 cascading inputs:<ul><li>I: A " +"> B</li><li>I: A < B</li><li>I: A = B</li></ul>and 3 " +"outputs:<ul><li>O: A > B</li><li>O: A < B</li><li>O: A = B</li></ul>" +msgstr "" + +#: electronics/components/magnitudecomparator.cpp:50 +#: electronics/components/multiinputgate.cpp:45 +msgid "Number Inputs" +msgstr "" + +#: electronics/components/matrixdisplay.cpp:34 +#: electronics/components/matrixdisplay.cpp:45 +msgid "Matrix Display" +msgstr "" + +#: electronics/components/matrixdisplay.cpp:46 +msgid "" +"A matrix display of LEDs with a configurable number of columns and rows." +msgstr "" + +#: electronics/components/matrixdisplay.cpp:63 +msgid "Rows" +msgstr "" + +#: electronics/components/matrixdisplaydriver.cpp:303 +#: electronics/components/matrixdisplaydriver.cpp:314 +msgid "Matrix Display Driver" +msgstr "" + +#: electronics/components/meter.cpp:41 +msgid "Minimum Value" +msgstr "" + +#: electronics/components/meter.cpp:47 +msgid "Maximum Value" +msgstr "" + +#: electronics/components/meter.cpp:155 +msgid "Frequency Meter (TODO)" +msgstr "" + +#: electronics/components/meter.cpp:165 +msgid "Frequency Meter" +msgstr "" + +#: electronics/components/meter.cpp:166 +msgid "Place this at the point where frequency is to be measured." +msgstr "" + +#: electronics/components/meter.cpp:195 electronics/components/meter.cpp:206 +msgid "Ammeter" +msgstr "" + +#: electronics/components/meter.cpp:207 +msgid "Place this in series in the circuit to measure the current flowing." +msgstr "" + +#: electronics/components/meter.cpp:238 electronics/components/meter.cpp:248 +msgid "Voltmeter" +msgstr "" + +#: electronics/components/meter.cpp:249 +msgid "" +"Place this in parallel in the circuit to meaure the voltage between two " +"points." +msgstr "" + +#: electronics/components/multiinputgate.cpp:148 +#: electronics/components/multiinputgate.cpp:158 +msgid "XNOR gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:159 +msgid "Exclusive NOR gate. Output is low when exactly one input is high." +msgstr "" + +#: electronics/components/multiinputgate.cpp:220 +#: electronics/components/multiinputgate.cpp:230 +msgid "XOR gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:231 +msgid "Exclusive OR gate. Output is high when exactly one input is high." +msgstr "" + +#: electronics/components/multiinputgate.cpp:290 +#: electronics/components/multiinputgate.cpp:300 +msgid "OR gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:301 +msgid "" +"The output is high when at least one of the inputs is high; or low when all " +"of the inputs are off" +msgstr "" + +#: electronics/components/multiinputgate.cpp:361 +msgid "NOR gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:371 +msgid "NOR Gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:372 +msgid "The output is high when all inputs are low." +msgstr "" + +#: electronics/components/multiinputgate.cpp:432 +msgid "NAND gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:442 +msgid "NAND Gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:443 +msgid "The output is low only when all of the inputs are high." +msgstr "" + +#: electronics/components/multiinputgate.cpp:488 +msgid "AND gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:498 +msgid "AND Gate" +msgstr "" + +#: electronics/components/multiinputgate.cpp:499 +msgid "The output is high if and only if all of the inputs are high." +msgstr "" + +#: electronics/components/multiplexer.cpp:30 +#: electronics/components/multiplexer.cpp:41 +msgid "Multiplexer" +msgstr "" + +#: electronics/components/multiplexer.cpp:42 +msgid "" +"Combines the input data stream into one single stream. The value of the " +"input selected by the \"A\" inputs is passed to the output." +msgstr "" + +#: electronics/components/parallelportcomponent.cpp:36 +#: electronics/components/parallelportcomponent.cpp:47 +msgid "Parallel Port" +msgstr "" + +#: electronics/components/parallelportcomponent.cpp:48 +msgid "" +"The pins are divided into 3 registers.<br><br><b>Data Pins</b><br><br>The " +"data pins can be configured as either all input or all output. They " +"are:<ul><li><b>D<i>[0..7]</i></b></li></ul><br><b>Status Pins</b><br><br>The " +"status pins are read-only. They area:<ul><li><b>ERR</b> - " +"Error</li><li><b>ON</b> - Online</li><li><b>PE</b> - Paper " +"End</li><li><b>ACK</b> - Acknowledge</li><li><b>BUSY</b> - " +"Busy</li></ul><br><b>Control Pins</b><ul><li><b>STR</b> - " +"Strobe</li><li><b>AUT</b> - Auto Feed</li><li><b>INIT</b> - " +"Init</li><li><b>SEL</b> - Select</li></ul><br>The remaining pins are all " +"ground." +msgstr "" + +#: electronics/components/parallelportcomponent.cpp:177 +#: electronics/components/serialportcomponent.cpp:124 +#: flowparts/readport.cpp:45 flowparts/writeport.cpp:50 +#: gui/programmerwidget.ui:65 +#, no-c-format +msgid "Port" +msgstr "" + +#: electronics/components/parallelportcomponent.cpp:203 +#: electronics/components/serialportcomponent.cpp:200 +#, c-format +msgid "Could not open port %1" +msgstr "" + +#: electronics/components/piccomponent.cpp:38 +msgid "<Enter location of PIC Program>" +msgstr "" + +#: electronics/components/piccomponent.cpp:64 +msgid "PIC Micro" +msgstr "" + +#: electronics/components/piccomponent.cpp:65 +msgid "" +"The PIC component allows the simulation of a PIC program.<br><br>The " +"loadable PIC program must be one of the following formats:<ul><li>Assembly " +"(.asm)</li><li>FlowCode (.flowcode)</li><li>Symbol file " +"(.cod)</li><li>Microbe (.microbe, .basic)</li><li>C source " +"(.c)</li></ul>Doubleclick on the PIC component to open up the program source " +"file.<br><br>If the program source file is of type assembly, then the the " +"opened text file will automatically be linked to the simulation. You can " +"control the program from the text document using the debug " +"controls.<br><br>Explanation of buttons:<ul><li>Play - Run the PIC program " +"from the point at which it was paused, or from the start " +"otherwise.</li><li>Pause - Pause the simulation at the current execution " +"point.</li><li>Stop - Reset all parts of the simulation.</li><li>Reload - " +"Reread the PIC program from disk and restart gpsim.</li></ul>" +msgstr "" + +#: electronics/components/piccomponent.cpp:101 +#: gui/createsubprojectwidget.ui:57 +#, no-c-format +msgid "Program" +msgstr "" + +#: electronics/components/piccomponent.cpp:162 +msgid "The file \"%1\" does not exist." +msgstr "" + +#: electronics/components/piccomponent.cpp:169 +msgid "" +"\"%1\" is not a valid PIC program.\n" +"The file must exist, and the extension should be \".cod\", \".asm\", " +"\".flowcode\", \".basic\", \".microbe\" or \".c\".\n" +"\".hex\" is allowed, provided that there is a corresponding \".cod\" file." +msgstr "" + +#: electronics/components/piccomponent.cpp:256 +msgid "" +"(No\n" +"program\n" +"loaded)" +msgstr "" + +#: electronics/components/probe.cpp:62 +msgid "Scaling" +msgstr "" + +#: electronics/components/probe.cpp:68 +msgid "Upper Absolute Value" +msgstr "" + +#: electronics/components/probe.cpp:75 +msgid "Lower Absolute Value" +msgstr "" + +#: electronics/components/probe.cpp:137 electronics/components/probe.cpp:147 +msgid "Voltage Probe" +msgstr "" + +#: electronics/components/probe.cpp:148 +msgid "Displays the voltage at the probe point on the oscilloscope." +msgstr "" + +#: electronics/components/probe.cpp:180 electronics/components/probe.cpp:190 +msgid "Current Probe" +msgstr "" + +#: electronics/components/probe.cpp:191 +msgid "Displays the current at the probe point on the oscilloscope." +msgstr "" + +#: electronics/components/probe.cpp:227 electronics/components/probe.cpp:237 +msgid "Logic Probe" +msgstr "" + +#: electronics/components/probe.cpp:238 +msgid "" +"Connect this probe the the point in the circuit to measure the logic value. " +"The output will be displayed in the Oscilloscope view." +msgstr "" + +#: electronics/components/pushswitch.cpp:32 +msgid "Push-to-Break" +msgstr "" + +#: electronics/components/pushswitch.cpp:42 +msgid "Push to Break" +msgstr "" + +#: electronics/components/pushswitch.cpp:48 +#: electronics/components/pushswitch.cpp:140 +#: electronics/components/toggleswitch.cpp:49 +#: electronics/components/toggleswitch.cpp:154 +#: electronics/components/toggleswitch.cpp:251 +#: electronics/components/toggleswitch.cpp:348 +msgid "Button Text" +msgstr "" + +#: electronics/components/pushswitch.cpp:51 +msgid "Bounce" +msgstr "" + +#: electronics/components/pushswitch.cpp:56 +msgid "Bounce Period" +msgstr "" + +#: electronics/components/pushswitch.cpp:124 +msgid "Push-to-Make" +msgstr "" + +#: electronics/components/pushswitch.cpp:134 +msgid "Push to Make" +msgstr "" + +#: electronics/components/ram.cpp:28 electronics/components/ram.cpp:39 +msgid "RAM" +msgstr "" + +#: electronics/components/ram.cpp:40 +msgid "" +"This RAM stores data as a collection of words; each of which contains " +"<i>word size</i> bits of data.<br><br>To read data, set the CS (<i>chip " +"select</i>) and the OE (<i>output enable</i>) pins high, and select the word " +"using the address pins <i>A*</i>. The word is outputted on the data-out " +"pins: <i>DO*</i>.<br><br>To write data, set the CS (<i>chip select</i>) and " +"the WE (<i>write enable</i>) pins high, and select the address to write to " +"with the <i>A*</i> pins. Write to the selected word using the data-in pins: " +"<i>DI*</i>.<br><br>The <i>Address Size</i> is the number of bits that " +"determine an address; so the total number of words stored will be " +"2^<sup><i>Address Size</i></sup>." +msgstr "" + +#: electronics/components/ram.cpp:50 +msgid "Word Size" +msgstr "" + +#: electronics/components/resistordip.cpp:29 +#: electronics/components/resistordip.cpp:40 +msgid "Resistor DIP" +msgstr "" + +#: electronics/components/resistordip.cpp:41 +msgid "Set of resistors with identical values in a Dual Inline Package." +msgstr "" + +#: electronics/components/resistordip.cpp:54 flowparts/count.cpp:27 +#: flowparts/count.cpp:37 +msgid "Count" +msgstr "" + +#: electronics/components/rotoswitch.cpp:35 +msgid "Rotary" +msgstr "" + +#: electronics/components/rotoswitch.cpp:48 +#: electronics/components/rotoswitch.cpp:49 +msgid "Rotary Switch" +msgstr "" + +#: electronics/components/rotoswitch.cpp:67 +msgid "Number of Positions" +msgstr "" + +#: electronics/components/serialportcomponent.cpp:36 +#: electronics/components/serialportcomponent.cpp:47 +msgid "Serial Port" +msgstr "" + +#: electronics/components/serialportcomponent.cpp:48 +msgid "" +"Interface to a serial port. The pins are:<br><ul><li><b>CD</b> - Carrier " +"Detect (control; output)</li><li><b>RD</b> - Received Data (data; " +"output)</li><li><b>TD</b> - Transmitted Data (data; " +"input)</li><li><b>DTR</b> - Data Terminal Ready (control; " +"input)</li><li><b>GND</b> - Signal Ground (ground)</li><li><b>DSR</b> - Data " +"Set Ready (control; input)</li><li><b>RTS</b> - Request to Send (control; " +"input)</li><li><b>CTS</b> - Clear to Send (control; " +"output)</li><li><b>RI</b> - Ring Indicator (control; output)</li></ul>" +msgstr "" + +#: electronics/components/toggleswitch.cpp:31 +msgid "DPDT" +msgstr "" + +#: electronics/components/toggleswitch.cpp:42 +msgid "DPDT Toggle" +msgstr "" + +#: electronics/components/toggleswitch.cpp:43 +msgid "Double-Pole Double-Throw switch." +msgstr "" + +#: electronics/components/toggleswitch.cpp:137 +msgid "DPST" +msgstr "" + +#: electronics/components/toggleswitch.cpp:147 +msgid "DPST Toggle" +msgstr "" + +#: electronics/components/toggleswitch.cpp:148 +msgid "Double-Pole Single-Throw switch." +msgstr "" + +#: electronics/components/toggleswitch.cpp:233 +msgid "SPDT" +msgstr "" + +#: electronics/components/toggleswitch.cpp:244 +msgid "SPDT Toggle" +msgstr "" + +#: electronics/components/toggleswitch.cpp:245 +msgid "Single-Pole Double-Throw switch." +msgstr "" + +#: electronics/components/toggleswitch.cpp:328 +msgid "SPST" +msgstr "" + +#: electronics/components/toggleswitch.cpp:340 +msgid "SPST Toggle" +msgstr "" + +#: electronics/components/toggleswitch.cpp:341 +msgid "Single-Pole Single-Throw switch." +msgstr "" + +#: electronics/gpsimprocessor.cpp:164 +msgid "The cod file \"%1\" was not found." +msgstr "" + +#: electronics/gpsimprocessor.cpp:164 +msgid "File Not Found" +msgstr "" + +#: electronics/gpsimprocessor.cpp:167 +msgid "The processor for cod file \"%1\" is unrecognized." +msgstr "" + +#: electronics/gpsimprocessor.cpp:167 +msgid "Unrecognized Processor" +msgstr "" + +#: electronics/gpsimprocessor.cpp:170 +msgid "The file name \"%1\" is too long." +msgstr "" + +#: electronics/gpsimprocessor.cpp:170 +msgid "Filename Too Long" +msgstr "" + +#: electronics/gpsimprocessor.cpp:173 +msgid "The lst file associated with the cod file \"%1\" was not found." +msgstr "" + +#: electronics/gpsimprocessor.cpp:173 +msgid "LST File Not Found" +msgstr "" + +#: electronics/gpsimprocessor.cpp:176 +msgid "The cod file \"%1\" is bad." +msgstr "" + +#: electronics/gpsimprocessor.cpp:176 +msgid "Bad File" +msgstr "" + +#: electronics/gpsimprocessor.cpp:179 +msgid "The cod file \"%1\" could not be read from." +msgstr "" + +#: electronics/gpsimprocessor.cpp:179 +msgid "Unreadable File" +msgstr "" + +#: electronics/gpsimprocessor.cpp:183 +msgid "An error occured with the cod file \"%1\"." +msgstr "" + +#: electronics/gpsimprocessor.cpp:183 +msgid "Error" +msgstr "" + +#: electronics/gpsimprocessor.cpp:845 +msgid "Generic" +msgstr "" + +#: electronics/gpsimprocessor.cpp:848 projectmanager.cpp:911 +msgid "File" +msgstr "" + +#: electronics/gpsimprocessor.cpp:851 +msgid "SFR" +msgstr "" + +#: electronics/gpsimprocessor.cpp:854 textdocument.cpp:82 +msgid "Breakpoint" +msgstr "" + +#: electronics/gpsimprocessor.cpp:857 +msgid "Invalid" +msgstr "" + +#: electronics/gpsimprocessor.cpp:860 +msgid "Unknown" +msgstr "" + +#: flowcodedocument.cpp:47 +msgid "" +"*.flowcode|FlowCode (*.flowcode)\n" +"*|All Files" +msgstr "" + +#: flowcodedocument.cpp:183 +msgid "Microbe Code Output" +msgstr "" + +#: flowcodedocument.cpp:205 textdocument.cpp:438 +msgid "Assembly Code Output" +msgstr "" + +#: flowcodedocument.cpp:227 textdocument.cpp:480 +msgid "Hex Code Output" +msgstr "" + +#: flowcodeview.cpp:27 textview.cpp:58 +msgid "Convert to ..." +msgstr "" + +#: flowcodeview.cpp:32 textview.cpp:53 +msgid "Convert to" +msgstr "" + +#: flowcodeview.cpp:33 textview.cpp:59 +msgid "Microbe" +msgstr "" + +#: flowcodeview.cpp:34 ktechlab.cpp:434 textview.cpp:60 +msgid "Assembly" +msgstr "" + +#: flowcodeview.cpp:35 textview.cpp:61 +msgid "Hex" +msgstr "" + +#: flowcodeview.cpp:36 textview.cpp:62 +msgid "PIC (upload)" +msgstr "" + +#: flowcodeview.cpp:54 +msgid "" +"Construct a FlowCode document by dragging FlowParts from the list on the " +"left. All FlowCharts require an initial \"Start\" part, of which there can " +"only be one.<br><br>Some FlowParts, such as Subroutines, act as a container " +"element for other FlowParts. Drag the items in or out of a container as " +"appropritate. The container that will become the parent of the part being " +"dragged is indicated by being selected.<br><br>Note that connections cannot " +"be made between FlowParts in different containers, or at different levels." +msgstr "" + +#: flowparts/callsub.cpp:27 flowparts/callsub.cpp:37 +msgid "Sub Call" +msgstr "" + +#: flowparts/callsub.cpp:28 flowparts/embed.cpp:28 flowparts/end.cpp:28 +#: flowparts/interrupt.cpp:28 flowparts/start.cpp:28 flowparts/sub.cpp:28 +msgid "Common" +msgstr "" + +#: flowparts/callsub.cpp:38 +msgid "" +"Call a subroutine. When the subroutine returns, the code will continue " +"execution from this point." +msgstr "" + +#: flowparts/callsub.cpp:44 flowparts/sub.cpp:27 flowparts/sub.cpp:41 +msgid "Subroutine" +msgstr "" + +#: flowparts/callsub.cpp:54 +#, c-format +msgid "Call %1" +msgstr "" + +#: flowparts/count.cpp:28 flowparts/delay.cpp:28 flowparts/inputbutton.cpp:28 +#: flowparts/keypad.cpp:28 flowparts/pulse.cpp:27 +msgid "Functions" +msgstr "" + +#: flowparts/count.cpp:38 +msgid "" +"Count the number of pulses during a fixed interval. To avoid ambiguity, this " +"increments the counter on either a rising or falling edge, as opposed to a " +"high or a low." +msgstr "" + +#: flowparts/count.cpp:46 flowparts/inputbutton.cpp:46 +msgid "Trigger" +msgstr "" + +#: flowparts/count.cpp:61 +msgid "Count %1 for %2 sec" +msgstr "" + +#: flowparts/delay.cpp:27 flowparts/delay.cpp:37 +msgid "Delay" +msgstr "" + +#: flowparts/delay.cpp:38 +msgid "Delay the program execution for a fixed period of time." +msgstr "" + +#: flowparts/delay.cpp:44 +msgid "Pause Length" +msgstr "" + +#: flowparts/delay.cpp:56 +msgid "Delay for %1 sec" +msgstr "" + +#: flowparts/embed.cpp:27 flowparts/embed.cpp:38 +msgid "Embed" +msgstr "" + +#: flowparts/embed.cpp:39 +msgid "Doubleclick on the item to edit the embedded code." +msgstr "" + +#: flowparts/embed.cpp:47 +msgid "Type" +msgstr "" + +#: flowparts/embed.cpp:50 +msgid "Code" +msgstr "" + +#: flowparts/embed.cpp:51 +msgid "// Embedded code:" +msgstr "" + +#: flowparts/embed.cpp:62 +msgid "%1: %2..." +msgstr "" + +#: flowparts/end.cpp:27 flowparts/end.cpp:37 flowparts/end.cpp:41 +msgid "End" +msgstr "" + +#: flowparts/end.cpp:38 +msgid "" +"End the program execution, putting the IC into sleep. Unlike Start, however, " +"this FlowPart is not necessary for proper program execution" +msgstr "" + +#: flowparts/forloop.cpp:27 +msgid "For" +msgstr "" + +#: flowparts/forloop.cpp:28 flowparts/repeat.cpp:28 flowparts/while.cpp:28 +msgid "Loops" +msgstr "" + +#: flowparts/forloop.cpp:37 +msgid "For Loop" +msgstr "" + +#: flowparts/forloop.cpp:38 +msgid "" +"The code contained in the foor loop is repeatedly executed. By default, the " +"variable used will be incremented every time. This can be changed by " +"entering a value other than 1 into Step.<br><br>The for loop will exit when " +"the value contained in the variable is equal to the end value." +msgstr "" + +#: flowparts/forloop.cpp:45 flowparts/keypad.cpp:46 flowparts/readport.cpp:50 +#: flowparts/repeat.cpp:44 flowparts/sevenseg.cpp:48 flowparts/unary.cpp:45 +#: flowparts/varassignment.cpp:44 flowparts/varcomparison.cpp:45 +#: flowparts/while.cpp:44 flowparts/writeport.cpp:45 +#: gui/microsettingswidget.ui:88 +#, no-c-format +msgid "Variable" +msgstr "" + +#: flowparts/forloop.cpp:50 +msgid "Initial Value" +msgstr "" + +#: flowparts/forloop.cpp:55 +msgid "End Value" +msgstr "" + +#: flowparts/forloop.cpp:60 textview.cpp:78 +msgid "Step" +msgstr "" + +#: flowparts/inputbutton.cpp:27 flowparts/inputbutton.cpp:39 +msgid "InputButton" +msgstr "" + +#: flowparts/inputbutton.cpp:40 +msgid "" +"Pauses program execution until a inputbutton has been pressed or released " +"(i.e. on rising or falling input), after performing debouncing." +msgstr "" + +#: flowparts/inputbutton.cpp:51 flowparts/pulse.cpp:59 flowparts/setpin.cpp:52 +#: flowparts/testpin.cpp:45 +msgid "Pin" +msgstr "" + +#: flowparts/inputbutton.cpp:62 +msgid "Continue on %1 %2" +msgstr "" + +#: flowparts/interrupt.cpp:27 flowparts/interrupt.cpp:37 +#: flowparts/interrupt.cpp:48 textview.cpp:76 +msgid "Interrupt" +msgstr "" + +#: flowparts/interrupt.cpp:38 +msgid "Defines the starting point of a interrupt handler." +msgstr "" + +#: flowparts/interrupt.cpp:58 +#, c-format +msgid "Interrupt %1" +msgstr "" + +#: flowparts/keypad.cpp:39 +msgid "Gets a key from a keypad connected to the PIC." +msgstr "" + +#: flowparts/keypad.cpp:49 flowparts/sevenseg.cpp:51 +msgid "Pin map" +msgstr "" + +#: flowparts/keypad.cpp:58 flowparts/readport.cpp:61 +msgid "Read %1 to %2" +msgstr "" + +#: flowparts/pinmapping.cpp:54 +msgid "Pin Map Editor" +msgstr "" + +#: flowparts/pulse.cpp:26 flowparts/pulse.cpp:37 +msgid "Pulse" +msgstr "" + +#: flowparts/pulse.cpp:38 +msgid "Pulse a pin high/low for a given duration." +msgstr "" + +#: flowparts/pulse.cpp:44 +msgid "Duration" +msgstr "" + +#: flowparts/pulse.cpp:71 +msgid "Pulse %1 for %2 sec" +msgstr "" + +#: flowparts/readport.cpp:27 flowparts/readport.cpp:37 +msgid "Read from Port" +msgstr "" + +#: flowparts/readport.cpp:28 flowparts/setpin.cpp:31 flowparts/testpin.cpp:28 +#: flowparts/writeport.cpp:28 +msgid "I\\/O" +msgstr "" + +#: flowparts/readport.cpp:38 +msgid "Assign the value of a port to a variable." +msgstr "" + +#: flowparts/readport.cpp:44 +msgid "Read" +msgstr "" + +#: flowparts/repeat.cpp:27 flowparts/repeat.cpp:37 +msgid "Repeat" +msgstr "" + +#: flowparts/repeat.cpp:38 +msgid "" +"Repeatedly execute code, until the given condition is false. The condition " +"is checked after the code has been executed.<br><br>This is different from " +"\"While\", which checks for the condition to be true before the code is " +"executed." +msgstr "" + +#: flowparts/repeat.cpp:49 flowparts/unary.cpp:48 +#: flowparts/varcomparison.cpp:52 flowparts/while.cpp:49 +msgid "Operation" +msgstr "" + +#: flowparts/repeat.cpp:55 flowparts/varassignment.cpp:49 +#: flowparts/varcomparison.cpp:56 flowparts/while.cpp:55 +#: gui/microsettingswidget.ui:93 gui/symbolviewer.cpp:98 +#, no-c-format +msgid "Value" +msgstr "" + +#: flowparts/repeat.cpp:65 +msgid "repeat until %1 %2 %3" +msgstr "" + +#: flowparts/setpin.cpp:30 flowparts/setpin.cpp:40 +msgid "Set Pin State" +msgstr "" + +#: flowparts/setpin.cpp:41 +msgid "" +"Set a pin on a port high or low. The pin needs to be set as an output pin." +msgstr "" + +#: flowparts/setpin.cpp:47 +msgid "State" +msgstr "" + +#: flowparts/setpin.cpp:62 +msgid "Set %1 %2" +msgstr "" + +#: flowparts/sevenseg.cpp:40 +msgid "SevenSeg" +msgstr "" + +#: flowparts/sevenseg.cpp:41 +msgid "Output to a Seven Segment display." +msgstr "" + +#: flowparts/sevenseg.cpp:62 +msgid "Display %1 on %2" +msgstr "" + +#: flowparts/start.cpp:27 flowparts/start.cpp:37 flowparts/start.cpp:41 +msgid "Start" +msgstr "" + +#: flowparts/start.cpp:38 +msgid "Determines the initial program execution point." +msgstr "" + +#: flowparts/sub.cpp:37 +msgid "Sub" +msgstr "" + +#: flowparts/sub.cpp:38 +msgid "" +"Defines the starting point of a subroutine. Call this subroutine using " +"\"Call Sub\"" +msgstr "" + +#: flowparts/testpin.cpp:27 flowparts/testpin.cpp:37 +msgid "Test Pin State" +msgstr "" + +#: flowparts/testpin.cpp:38 +msgid "Conditional branch point, depending on the high/low state of a pin." +msgstr "" + +#: flowparts/unary.cpp:27 flowparts/unary.cpp:37 +msgid "Unary" +msgstr "" + +#: flowparts/unary.cpp:28 flowparts/varassignment.cpp:28 +#: flowparts/varcomparison.cpp:28 +msgid "Variables" +msgstr "" + +#: flowparts/unary.cpp:38 +msgid "" +"A unary operation involves only one variable. Suppo operations " +"are:<br><ul><li><b>Rotate Left</b> rotates the binary bits of the variable " +"left (discarding the end bits).</li><li><b>Rotate Right</b> rotates the " +"binary bits right (discarding the start bits).</li><li><b>Increment</b> " +"increases the value of the variable by 1. A value of 255 wraps around to " +"0.</li><li><b>Decrement</b> decreases the value of a variable by 1. A value " +"of 0 wraps around to 255.</li></ul>" +msgstr "" + +#: flowparts/varassignment.cpp:27 +msgid "Assignment" +msgstr "" + +#: flowparts/varassignment.cpp:37 +msgid "Variable Assignment" +msgstr "" + +#: flowparts/varassignment.cpp:38 +msgid "" +"Assigns the evaluation of an expression to a variable. The expression can " +"take many forms. For example:<ul><li><b>x = 2</b></li><li><b>x = y + " +"3</b></li><li><b>x = y + z</b></li><li><b>x = 2 * y</b></ul>" +msgstr "" + +#: flowparts/varcomparison.cpp:27 +msgid "Comparison" +msgstr "" + +#: flowparts/varcomparison.cpp:37 +msgid "Variable Comparison" +msgstr "" + +#: flowparts/varcomparison.cpp:38 +msgid "" +"Conditional branch point, depending on the comparison of two values. The " +"supported comparisons are:<ul><li><b>x == y</b> - Equality: true if x has " +"the same value as y.</li><li><b>x < y</b> - Less than: true if x is " +"smaller than y.</li><li><b>x > y</b> - Greater than: true if x is bigger " +"than y.</li><li><b>x <= y</b> - Less than or equal: true if x is less " +"than or equal to y.</li><li><b>x >= y</b> - Greater than or equal: true " +"if x is greater than or equal to y.</li><li><b>x != y</b> - Does not equal: " +"true if x does not have the same value as y.</li></ul>" +msgstr "" + +#: flowparts/while.cpp:27 flowparts/while.cpp:37 +msgid "While" +msgstr "" + +#: flowparts/while.cpp:38 +msgid "" +"Repeatedly execute code, until the given condition is false. The condition " +"is checked before the code has been executed.<br><br>This is different from " +"\"Repeat\", which checks for the condition to be true after the code is " +"executed." +msgstr "" + +#: flowparts/while.cpp:65 +msgid "while %1 %2 %3" +msgstr "" + +#: flowparts/writeport.cpp:27 flowparts/writeport.cpp:37 +msgid "Write to Port" +msgstr "" + +#: flowparts/writeport.cpp:38 +msgid "" +"Sets the port's pins state to high/low from the given value. Only pins that " +"have been configured as output pins will take on the value assigned to them." +msgstr "" + +#: flowparts/writeport.cpp:44 +msgid "Write" +msgstr "" + +#: flowparts/writeport.cpp:62 +msgid "Write %1 to %2" +msgstr "" + +#: gui/colorcombo.cpp:120 gui/colorcombo.cpp:172 +msgid "Custom..." +msgstr "" + +#: gui/contexthelp.cpp:43 +msgid "" +"Provides context-sensitive help relevant to the current editing being " +"performed." +msgstr "" + +#: gui/contexthelp.cpp:81 gui/itemeditor.cpp:151 +msgid "<h2>No Item Selected</h2>" +msgstr "" + +#: gui/contexthelp.cpp:88 gui/itemeditor.cpp:108 +msgid "<h2>Multiple Items</h2>" +msgstr "" + +#: gui/itemeditor.cpp:43 +msgid "" +"This allows editing of advanced properties of the selected item(s). Right " +"click on the picture of the item to set the orientation." +msgstr "" + +#: gui/itemeditor.cpp:53 +msgid "" +"<qt>Shows properties associated with the currently selected " +"item(s).<p>Select a property to change its value. If multiple items are " +"selected with different values then the property will appear greyed out, use " +"Merge Properties to make them the same.<p>Select Defaults to set all " +"properties to their default values" +msgstr "" + +#: gui/itemeditor.cpp:59 +msgid "Defaults" +msgstr "" + +#: gui/itemeditor.cpp:64 +msgid "Merge properties" +msgstr "" + +#: gui/itemeditor.cpp:75 +msgid "" +"Change the orientation of the selected item by selecting the appropriate " +"button" +msgstr "" + +#: gui/itemselector.cpp:53 gui/itemselector.cpp:292 +msgid "Component" +msgstr "" + +#: gui/itemselector.cpp:166 +#, c-format +msgid "Remove %1" +msgstr "" + +#: gui/itemselector.cpp:285 +msgid "" +"Add components to the circuit diagram by dragging them into the " +"circuit.<br><br>To add more than one component of the same type, doubleclick " +"on a component, and click repeatedly in the circuit to place the component. " +"Right click to stop placement.<br><br>Some components (such as subcircuits) " +"can be removed by right clicking on the item and selecting \"Remove\"." +msgstr "" + +#: gui/itemselector.cpp:324 +msgid "" +"Add FlowPart to the FlowCode document by dragging them there.<br><br>To add " +"more than one FlowPart of the same type, doubleclick on a FlowPart, and " +"click repeatedly in the FlowChart to place the component. Right click to " +"stop placement." +msgstr "" + +#: gui/itemselector.cpp:326 +msgid "Flow Part" +msgstr "" + +#: gui/itemselector.cpp:357 +msgid "Add mechanical parts to the mechanics work area by dragging them there." +msgstr "" + +#: gui/logview.cpp:105 +msgid "Clear All" +msgstr "" + +#: gui/microselectwidget.cpp:26 +msgid "Microprocessor" +msgstr "" + +#: gui/microselectwidget.cpp:35 +msgid "Family" +msgstr "" + +#: gui/microselectwidget.cpp:41 +msgid "Micro" +msgstr "" + +#: gui/microsettingsdlg.cpp:35 gui/microsettingswidget.ui:24 +#: picitem.cpp:318 +#, no-c-format +msgid "PIC Settings" +msgstr "" + +#: gui/microsettingsdlg.cpp:42 +msgid "This dialog allows editing of the initial properties of the PIC" +msgstr "" + +#: gui/microsettingsdlg.cpp:43 +msgid "" +"Edit the initial value of the ports here. For each binary number, the order " +"from right-to-left is pins 0 through 7.<br><br>The \"Type (TRIS)\" edit " +"shows the initial input/output state of the ports; 1 represents an input, " +"and 0 an output.<br><br>The \"State (PORT)\" edit shows the initial high/low " +"state of the ports; 1 represents a high, and 0 a low." +msgstr "" + +#: gui/microsettingsdlg.cpp:44 +msgid "" +"Edit the initial value of the variables here.<br><br>Note that the value of " +"the variable can only be in the range 0->255. These variables will be " +"initialized before any other code is executed." +msgstr "" + +#: gui/microsettingsdlg.cpp:78 +msgid "Type (TRIS register):" +msgstr "" + +#: gui/microsettingsdlg.cpp:79 +msgid "State (PORT register):" +msgstr "" + +#: gui/microsettingsdlg.cpp:243 gui/newpinmappingwidget.ui:16 +#: gui/newpinmappingwidget.ui:51 +#, no-c-format +msgid "New Pin Mapping" +msgstr "" + +#: gui/microsettingsdlg.cpp:244 gui/microsettingswidget.ui:160 +#, no-c-format +msgid "Create" +msgstr "" + +#: gui/microsettingsdlg.cpp:306 +msgid "New Pin Map Name" +msgstr "" + +#: gui/microsettingsdlg.cpp:414 +#, c-format +msgid "Invalid variable value: %1" +msgstr "" + +#: gui/oscilloscope.cpp:336 +msgid "Oscilloscope" +msgstr "" + +#: gui/oscilloscopeview.cpp:126 +msgid "Framerate" +msgstr "" + +#: gui/oscilloscopeview.cpp:133 +msgid "%1 fps" +msgstr "" + +#: gui/pieditor.cpp:53 variant.cpp:103 +msgid "True" +msgstr "" + +#: gui/pieditor.cpp:54 variant.cpp:103 +msgid "False" +msgstr "" + +#: gui/programmerdlg.cpp:25 gui/settingsdlg.cpp:59 +msgid "PIC Programmer" +msgstr "" + +#: gui/programmerdlg.cpp:29 +msgid "Burn" +msgstr "" + +#: gui/projectdlgs.cpp:167 +msgid "Link libraries outside project" +msgstr "" + +#: gui/propertieslistview.cpp:31 +msgid "Property" +msgstr "" + +#: gui/propertieslistview.cpp:32 +msgid "Data" +msgstr "" + +#: gui/settingsdlg.cpp:58 +msgid "General" +msgstr "" + +#: gui/generaloptionswidget.ui:16 gui/settingsdlg.cpp:58 +#, no-c-format +msgid "General Options" +msgstr "" + +#: gui/programmerwidget.ui:16 gui/settingsdlg.cpp:59 +#, no-c-format +msgid "Programmer" +msgstr "" + +#: gui/settingsdlg.cpp:60 +msgid "Formatter" +msgstr "" + +#: gui/settingsdlg.cpp:60 +msgid "Assembly Formatter" +msgstr "" + +#: gui/settingsdlg.cpp:61 +msgid "Electronic Logic Values" +msgstr "" + +#: gui/settingsdlg.cpp:107 +msgid "Lowest (%1 FPS)" +msgstr "" + +#: gui/settingsdlg.cpp:110 +msgid "Low (%1 FPS)" +msgstr "" + +#: gui/settingsdlg.cpp:113 +msgid "Medium (%1 FPS)" +msgstr "" + +#: gui/settingsdlg.cpp:116 +msgid "High (%1 FPS)" +msgstr "" + +#: gui/settingsdlg.cpp:119 +msgid "Highest (%1 FPS)" +msgstr "" + +#: gui/settingsdlg.cpp:122 +msgid "Unknown value" +msgstr "" + +#: gui/settingsdlg.cpp:144 +msgid "<b>%1</b> cannot be found.<br>" +msgstr "" + +#: gui/settingsdlg.cpp:146 +msgid "<b>%1</b> found: %2<br>" +msgstr "" + +#: gui/settingsdlg.cpp:196 +msgid "Remove programmer configuration \"%1\"?" +msgstr "" + +#: gui/settingsdlg.cpp:196 +msgid "Remove \"%1\"" +msgstr "" + +#: gui/microsettingswidget.ui:135 gui/settingsdlg.cpp:196 +#: projectmanager.cpp:1133 +#, no-c-format +msgid "Remove" +msgstr "" + +#: gui/settingsdlg.cpp:235 +msgid "Configuration Name" +msgstr "" + +#: gui/symbolviewer.cpp:82 +msgid "Value radix:" +msgstr "" + +#: gui/gpasmsettingswidget.ui:144 gui/symbolviewer.cpp:86 +#, no-c-format +msgid "Binary" +msgstr "" + +#: gui/gpasmsettingswidget.ui:149 gui/symbolviewer.cpp:87 +#, no-c-format +msgid "Octal" +msgstr "" + +#: gui/gpasmsettingswidget.ui:139 gui/symbolviewer.cpp:88 +#, no-c-format +msgid "Decimal" +msgstr "" + +#: gui/gpasmsettingswidget.ui:154 gui/symbolviewer.cpp:89 +#, no-c-format +msgid "Hexadecimal" +msgstr "" + +#: icnview.cpp:31 icnview.cpp:49 +msgid "Automatic" +msgstr "" + +#: icnview.cpp:36 icnview.cpp:50 +msgid "Manual" +msgstr "" + +#: icnview.cpp:43 icnview.cpp:47 +msgid "Connection Routing Mode" +msgstr "" + +#: icnview.cpp:97 +msgid "<b>Manual</b> connection routing enabled." +msgstr "" + +#: icnview.cpp:97 +msgid "<b>Automatic</b> connection routing enabled." +msgstr "" + +#: itemdocument.cpp:84 +msgid "Alignment" +msgstr "" + +#: itemdocument.cpp:797 +msgid "Crop image to program parts" +msgstr "" + +#: itemdocument.cpp:800 +msgid "Crop image to circuit components" +msgstr "" + +#: itemdocument.cpp:803 +msgid "Crop image" +msgstr "" + +#: itemdocument.cpp:810 itemdocument.cpp:852 itemdocument.cpp:859 +#: itemdocument.cpp:868 +msgid "Export As Image" +msgstr "" + +#: itemdocument.cpp:852 +msgid "SVG export is sub-functional" +msgstr "" + +#: itemdocument.cpp:859 +msgid "Unknown extension, please select one from the filter list." +msgstr "" + +#: itemdocument.cpp:868 +msgid "There is nothing to crop" +msgstr "" + +#: itemdocument.cpp:934 +msgid "Export failed" +msgstr "" + +#: itemdocument.cpp:934 +msgid "Image Export" +msgstr "" + +#: itemdocumentdata.cpp:113 projectmanager.cpp:791 +msgid "Could not open %1 for reading" +msgstr "" + +#: itemdocumentdata.cpp:135 projectmanager.cpp:808 +#, c-format +msgid "" +"Couldn't parse xml:\n" +"%1" +msgstr "" + +#: itemdocumentdata.cpp:183 +msgid "Could not open '%1' for writing. Check that you have write permissions" +msgstr "" + +#: itemdocumentdata.cpp:183 +msgid "Saving File" +msgstr "" + +#: itemview.cpp:47 projectmanager.cpp:1133 +msgid "Cancel" +msgstr "" + +#: itemview.cpp:47 +msgid "Cancel the current operation" +msgstr "" + +#: itemview.cpp:50 +msgid "Delete" +msgstr "" + +#: itemview.cpp:51 +msgid "Export as Image..." +msgstr "" + +#: itemview.cpp:54 +msgid "Align Horizontally" +msgstr "" + +#: itemview.cpp:55 +msgid "Align Vertically" +msgstr "" + +#: itemview.cpp:56 +msgid "Distribute Horizontally" +msgstr "" + +#: itemview.cpp:57 +msgid "Distribute Vertically" +msgstr "" + +#: itemview.cpp:62 itemview.cpp:66 +msgid "Draw" +msgstr "" + +#: itemview.cpp:78 +msgid "Raise Selection" +msgstr "" + +#: itemview.cpp:79 +msgid "Lower Selection" +msgstr "" + +#: itemview.cpp:385 itemview.cpp:398 +msgid "Left click to add. Right click to resume normal editing" +msgstr "" + +#: itemview.cpp:390 +msgid "Click and hold to start drawing." +msgstr "" + +#: itemview.cpp:401 +msgid "Right click to cancel the connector" +msgstr "" + +#: katemdi.cpp:401 +msgid "Behavior" +msgstr "" + +#: katemdi.cpp:403 +msgid "Make Non-Persistent" +msgstr "" + +#: katemdi.cpp:403 +msgid "Make Persistent" +msgstr "" + +#: katemdi.cpp:405 +msgid "Move To" +msgstr "" + +#: katemdi.cpp:408 +msgid "Left Sidebar" +msgstr "" + +#: katemdi.cpp:411 +msgid "Right Sidebar" +msgstr "" + +#: katemdi.cpp:414 +msgid "Top Sidebar" +msgstr "" + +#: katemdi.cpp:417 +msgid "Bottom Sidebar" +msgstr "" + +#: ktechlab.cpp:167 +msgid "Project" +msgstr "" + +#: ktechlab.cpp:174 +msgid "Components" +msgstr "" + +#: ktechlab.cpp:185 +msgid "Flow Parts" +msgstr "" + +#: ktechlab.cpp:193 ktechlab.cpp:439 +msgid "Mechanics" +msgstr "" + +#: ktechlab.cpp:201 ktechlabcircuitui.rc:27 +#: ktechlabflowcodeui.rc:27 ktechlabmechanicsui.rc:7 +#, no-c-format +msgid "Item Editor" +msgstr "" + +#: ktechlab.cpp:207 +msgid "Context Help" +msgstr "" + +#: ktechlab.cpp:213 +msgid "Messages" +msgstr "" + +#: ktechlab.cpp:220 +msgid "Symbol Viewer" +msgstr "" + +#: ktechlab.cpp:432 +msgid "&New" +msgstr "" + +#: gui/newfilewidget.ui:16 ktechlab.cpp:433 +#, no-c-format +msgid "New File" +msgstr "" + +#: ktechlab.cpp:435 +msgid "C source" +msgstr "" + +#: ktechlab.cpp:436 +msgid "Circuit" +msgstr "" + +#: ktechlab.cpp:437 languages/flowcode.cpp:26 +msgid "FlowCode" +msgstr "" + +#: ktechlab.cpp:446 +msgid "Open Recent" +msgstr "" + +#: ktechlab.cpp:451 +msgid "New Project.." +msgstr "" + +#: ktechlab.cpp:452 +msgid "Open Project..." +msgstr "" + +#: ktechlab.cpp:454 +msgid "Open &Recent Project..." +msgstr "" + +#: ktechlab.cpp:455 +msgid "Export to Makefile..." +msgstr "" + +#: ktechlab.cpp:456 +msgid "Create Subproject..." +msgstr "" + +#: ktechlab.cpp:457 +msgid "Add Existing File..." +msgstr "" + +#: ktechlab.cpp:458 +msgid "Add Current File..." +msgstr "" + +#: ktechlab.cpp:460 +msgid "Close Project" +msgstr "" + +#: ktechlab.cpp:461 +msgid "Remove from Project" +msgstr "" + +#: ktechlab.cpp:462 +msgid "Insert Existing File..." +msgstr "" + +#: ktechlab.cpp:463 +msgid "Insert Current File..." +msgstr "" + +#: ktechlab.cpp:464 +msgid "Linker Options..." +msgstr "" + +#: ktechlab.cpp:465 +msgid "Build..." +msgstr "" + +#: ktechlab.cpp:466 +msgid "Upload..." +msgstr "" + +#: ktechlab.cpp:467 +msgid "Processing Options..." +msgstr "" + +#: ktechlab.cpp:470 +msgid "Split View Left/Right" +msgstr "" + +#: ktechlab.cpp:471 +msgid "Split View Top/Bottom" +msgstr "" + +#: ktechlab.cpp:473 +msgid "Run Simulation" +msgstr "" + +#: ktechlab.cpp:478 +msgid "Pause Simulation" +msgstr "" + +#: ktechlab.cpp:558 +msgid "&Insert Into" +msgstr "" + +#: ktechlab.cpp:559 +msgid "&Copy Into" +msgstr "" + +#: ktechlab.cpp:561 +msgid "C&ancel" +msgstr "" + +#: ktechlab.cpp:818 +msgid "Close" +msgstr "" + +#: ktechlab.cpp:826 +msgid "Reload" +msgstr "" + +#: ktechlab.cpp:829 +msgid "Close All Others" +msgstr "" + +#: ktechlab.cpp:1003 projectmanager.cpp:959 +msgid "Open Location" +msgstr "" + +#: ktechlab.cpp:1164 +msgid "Exiting..." +msgstr "" + +#: languages/flowcode.cpp:28 +msgid "*** Microbe generation successful ***" +msgstr "" + +#: languages/flowcode.cpp:29 +msgid "*** Microbe generation failed ***" +msgstr "" + +#: languages/flowcode.cpp:176 +#, c-format +msgid "Warning: Floating connection for %1" +msgstr "" + +#: languages/flowcode.cpp:194 +msgid "" +"KTechlab was unable to find the \"Start\" part.\n" +"This must be included as the starting point for your program." +msgstr "" + +#: languages/gpasm.cpp:26 +msgid "*** Assembly successful ***" +msgstr "" + +#: languages/gpasm.cpp:27 +msgid "*** Assembly failed ***" +msgstr "" + +#: languages/gpasm.cpp:120 +msgid "Assembly failed. Please check you have gputils installed." +msgstr "" + +#: languages/gpdasm.cpp:25 +msgid "*** Disassembly successful ***" +msgstr "" + +#: languages/gpdasm.cpp:26 +msgid "*** Disassembly failed ***" +msgstr "" + +#: languages/gpdasm.cpp:49 +msgid "Disassembly failed. Please check you have gputils installed." +msgstr "" + +#: languages/gplib.cpp:22 +msgid "*** Archiving successful ***" +msgstr "" + +#: languages/gplib.cpp:23 +msgid "*** Archiving failed ***" +msgstr "" + +#: languages/gplib.cpp:49 languages/gplink.cpp:80 +msgid "Linking failed. Please check you have gputils installed." +msgstr "" + +#: languages/gplink.cpp:22 +msgid "*** Linking successful ***" +msgstr "" + +#: languages/gplink.cpp:23 +msgid "*** Linking failed ***" +msgstr "" + +#: languages/languagemanager.cpp:54 +msgid "" +"These messages show the output of language-related functionality such as " +"compiling and assembling.<br><br>For error messages, clicking on the line " +"will automatically open up the file at the position of the error." +msgstr "" + +#: languages/microbe.cpp:28 languages/sdcc.cpp:27 +msgid "*** Compilation failed ***" +msgstr "" + +#: languages/microbe.cpp:29 languages/sdcc.cpp:26 +msgid "*** Compilation successful ***" +msgstr "" + +#: languages/microbe.cpp:32 +msgid "error_messages_en_gb" +msgstr "" + +#: languages/microbe.cpp:77 +msgid "" +"Assembly failed. Please check you have KTechlab installed properly " +"(\"microbe\" could not be started)." +msgstr "" + +#: languages/picprogrammer.cpp:66 languages/picprogrammer.cpp:78 +#: languages/picprogrammer.cpp:90 languages/picprogrammer.cpp:101 +#: languages/picprogrammer.cpp:112 languages/picprogrammer.cpp:123 +#: languages/picprogrammer.cpp:135 languages/picprogrammer.cpp:148 +#: languages/picprogrammer.cpp:159 languages/picprogrammer.cpp:170 +#: languages/picprogrammer.cpp:181 +#, c-format +msgid "Supported programmers: %1" +msgstr "" + +#: languages/picprogrammer.cpp:67 languages/picprogrammer.cpp:91 +#: languages/picprogrammer.cpp:124 +msgid "<br>Interface: Serial Port" +msgstr "" + +#: languages/picprogrammer.cpp:79 languages/picprogrammer.cpp:102 +#: languages/picprogrammer.cpp:149 languages/picprogrammer.cpp:160 +#: languages/picprogrammer.cpp:171 languages/picprogrammer.cpp:182 +msgid "<br>Interface: Parallel Port" +msgstr "" + +#: languages/picprogrammer.cpp:113 +msgid "<br>Interface: USB Port" +msgstr "" + +#: languages/picprogrammer.cpp:136 +msgid "<br>Interface: Serial Port and Parallel Port" +msgstr "" + +#: languages/picprogrammer.cpp:359 +msgid "*** Programming successful ***" +msgstr "" + +#: languages/picprogrammer.cpp:360 +msgid "*** Programming failed ***" +msgstr "" + +#: languages/processchain.cpp:59 +#, c-format +msgid "Building: %1" +msgstr "" + +#: languages/sdcc.cpp:43 +msgid "Could not find PIC with ID \"%1\"." +msgstr "" + +#: languages/sdcc.cpp:132 +msgid "Compilation failed. Please check you have sdcc installed." +msgstr "" + +#: mechanics/chassiscircular2.cpp:35 mechanics/chassiscircular2.cpp:46 +msgid "Circular 2-Wheel Chassis" +msgstr "" + +#: mechanics/chassiscircular2.cpp:36 +msgid "Chassis'" +msgstr "" + +#: mechanics/chassiscircular2.cpp:47 +msgid "A circular base with two wheels and a support point." +msgstr "" + +#: mechanics/mechanicsdocument.cpp:28 +msgid "" +"*.mechanics|Mechanics (*.mechanics)\n" +"*|All Files" +msgstr "" + +#: mechanics/mechanicsitem.cpp:40 +msgid "Mass" +msgstr "" + +#: mechanics/mechanicsitem.cpp:48 +msgid "Moment of Inertia" +msgstr "" + +#: picitem.cpp:256 +msgid "Advanced..." +msgstr "" + +#: projectmanager.cpp:423 +msgid "Don't know how to build \"%1\" (output url is empty)." +msgstr "" + +#: projectmanager.cpp:434 +msgid "Don't know how to build \"%1\" (library does not exist in project)." +msgstr "" + +#: projectmanager.cpp:464 +msgid "Don't know how to build \"%1\" (unknown output type)." +msgstr "" + +#: projectmanager.cpp:848 +msgid "Project could not be saved to \"%1\"" +msgstr "" + +#: projectmanager.cpp:848 +msgid "Saving Project" +msgstr "" + +#: projectmanager.cpp:909 +msgid "" +"Displays the list of files in the project.\n" +"To open or close a project, use the \"Project\" menu. Right click on a file " +"to remove it from the project" +msgstr "" + +#: projectmanager.cpp:912 +msgid "Project Manager" +msgstr "" + +#: projectmanager.cpp:1133 +msgid "Do you really want to remove \"%1\"?" +msgstr "" + +#: projectmanager.cpp:1133 +msgid "Remove Project File?" +msgstr "" + +#: textdocument.cpp:69 +msgid "Libkatepart not available for constructing editor" +msgstr "" + +#: textdocument.cpp:606 +msgid "%1 - %2" +msgstr "" + +#: textdocument.cpp:732 +msgid "Unknown code type." +msgstr "" + +#: textdocument.cpp:732 textdocument.cpp:736 +msgid "Cannot debug" +msgstr "" + +#: textdocument.cpp:736 +msgid "Cannot debug hex." +msgstr "" + +#: textview.cpp:69 +msgid "Format Assembly Code" +msgstr "" + +#: textview.cpp:74 textview.cpp:280 +msgid "Set &Breakpoint" +msgstr "" + +#: textview.cpp:75 +msgid "Run" +msgstr "" + +#: textview.cpp:77 +msgid "Stop" +msgstr "" + +#: textview.cpp:79 +msgid "Step Over" +msgstr "" + +#: textview.cpp:80 +msgid "Step Out" +msgstr "" + +#: textview.cpp:265 +msgid " Line: %1 Col: %2 " +msgstr "" + +#: textview.cpp:278 +msgid "Clear &Breakpoint" +msgstr "" + +#: viewcontainer.cpp:348 +msgid "(empty)" +msgstr "" + +#: core/ktechlab.kcfg:6 +#, no-c-format +msgid "Maximum number of undo steps" +msgstr "" + +#: core/ktechlab.kcfg:10 +#, no-c-format +msgid "Restore Documents on Startup" +msgstr "" + +#: core/ktechlab.kcfg:14 +#, no-c-format +msgid "Raise appropriate Item Selector on document creation" +msgstr "" + +#: core/ktechlab.kcfg:18 +#, no-c-format +msgid "Raise Messages Log on Compiling" +msgstr "" + +#: core/ktechlab.kcfg:22 +#, no-c-format +msgid "Show Voltage Bars" +msgstr "" + +#: core/ktechlab.kcfg:26 +#, no-c-format +msgid "Refresh Rate" +msgstr "" + +#: core/ktechlab.kcfg:30 +#, no-c-format +msgid "Color of grid lines" +msgstr "" + +#: core/ktechlab.kcfg:34 +#, no-c-format +msgid "Background color" +msgstr "" + +#: core/ktechlab.kcfg:38 +#, no-c-format +msgid "Whether the grid should be shown." +msgstr "" + +#: core/ktechlab.kcfg:42 +#, no-c-format +msgid "Whether the same output should be use for generation of code, etc" +msgstr "" + +#: core/ktechlab.kcfg:49 +#, no-c-format +msgid "Indentation of Instruction Names" +msgstr "" + +#: core/ktechlab.kcfg:53 +#, no-c-format +msgid "Indentation of Instruction Data" +msgstr "" + +#: core/ktechlab.kcfg:57 +#, no-c-format +msgid "Indentation of Comments" +msgstr "" + +#: core/ktechlab.kcfg:61 +#, no-c-format +msgid "Indentation of 'equ'" +msgstr "" + +#: core/ktechlab.kcfg:65 +#, no-c-format +msgid "Indentation of 'equ' Value" +msgstr "" + +#: core/ktechlab.kcfg:69 +#, no-c-format +msgid "Automatically format Microbe output" +msgstr "" + +#: core/ktechlab.kcfg:76 +#, no-c-format +msgid "Rising Trigger Threshold" +msgstr "" + +#: core/ktechlab.kcfg:80 +#, no-c-format +msgid "Falling Trigger Threshold" +msgstr "" + +#: core/ktechlab.kcfg:84 +#, no-c-format +msgid "Logic Output High" +msgstr "" + +#: core/ktechlab.kcfg:88 +#, no-c-format +msgid "Logic Output High Impedance" +msgstr "" + +#: core/ktechlab.kcfg:92 +#, no-c-format +msgid "Logic Output Low Impedance" +msgstr "" + +#: core/ktechlab.kcfg:99 +#, no-c-format +msgid "Hex Format" +msgstr "" + +#: core/ktechlab.kcfg:109 +#, no-c-format +msgid "Radix" +msgstr "" + +#: core/ktechlab.kcfg:119 +#, no-c-format +msgid "GpasmWarning Level" +msgstr "" + +#: core/ktechlab.kcfg:128 +#, no-c-format +msgid "Ignore Case" +msgstr "" + +#: core/ktechlab.kcfg:132 +#, no-c-format +msgid "Dos Formatting" +msgstr "" + +#: core/ktechlab.kcfg:136 core/ktechlab.kcfg:275 +#, no-c-format +msgid "Other Options" +msgstr "" + +#: core/ktechlab.kcfg:143 +#, no-c-format +msgid "Don't search in the standard library directory" +msgstr "" + +#: core/ktechlab.kcfg:147 +#, no-c-format +msgid "Don't search in the standard include directory" +msgstr "" + +#: core/ktechlab.kcfg:151 +#, no-c-format +msgid "Disable pedantic warnings" +msgstr "" + +#: core/ktechlab.kcfg:155 +#, no-c-format +msgid "Strictly follow the C89 standard" +msgstr "" + +#: core/ktechlab.kcfg:159 +#, no-c-format +msgid "Strictly follow the C99 standard" +msgstr "" + +#: core/ktechlab.kcfg:164 +#, no-c-format +msgid "Stack automatic variables" +msgstr "" + +#: core/ktechlab.kcfg:168 +#, no-c-format +msgid "Integer libraries have been compiled as reentrant" +msgstr "" + +#: core/ktechlab.kcfg:172 +#, no-c-format +msgid "Floating point library is has been compiled as reentrant" +msgstr "" + +#: core/ktechlab.kcfg:176 +#, no-c-format +msgid "Leave out the frame pointer" +msgstr "" + +#: core/ktechlab.kcfg:180 +#, no-c-format +msgid "Don't memcpy initialized data from code space to xdata space" +msgstr "" + +#: core/ktechlab.kcfg:184 +#, no-c-format +msgid "Callee will always save registers used" +msgstr "" + +#: core/ktechlab.kcfg:189 +#, no-c-format +msgid "Don't overlay parameters and local variables" +msgstr "" + +#: core/ktechlab.kcfg:193 +#, no-c-format +msgid "Disable the GCSE optimization" +msgstr "" + +#: core/ktechlab.kcfg:197 +#, no-c-format +msgid "Don't optimize labels" +msgstr "" + +#: core/ktechlab.kcfg:201 +#, no-c-format +msgid "Disable optimization of invariants" +msgstr "" + +#: core/ktechlab.kcfg:205 +#, no-c-format +msgid "Disable loop variable induction" +msgstr "" + +#: core/ktechlab.kcfg:209 +#, no-c-format +msgid "Disable peep-hole optimization" +msgstr "" + +#: core/ktechlab.kcfg:213 +#, no-c-format +msgid "Don't do loop reversal optimization" +msgstr "" + +#: core/ktechlab.kcfg:217 +#, no-c-format +msgid "Optimize for compact code" +msgstr "" + +#: core/ktechlab.kcfg:221 +#, no-c-format +msgid "Optimize for fast code" +msgstr "" + +#: core/ktechlab.kcfg:225 +#, no-c-format +msgid "Pass inline assembler code through peep hole optimizer" +msgstr "" + +#: core/ktechlab.kcfg:229 +#, no-c-format +msgid "Don't generate boundary check for jump tables" +msgstr "" + +#: core/ktechlab.kcfg:234 +#, no-c-format +msgid "Don't use default libraries" +msgstr "" + +#: core/ktechlab.kcfg:238 +#, no-c-format +msgid "Don't generate BANKSEL directives" +msgstr "" + +#: core/ktechlab.kcfg:242 +#, no-c-format +msgid "Use large stack model" +msgstr "" + +#: core/ktechlab.kcfg:246 +#, no-c-format +msgid "Show more debug info in assembly output" +msgstr "" + +#: core/ktechlab.kcfg:250 +#, no-c-format +msgid "Explicit enable of peepholes" +msgstr "" + +#: core/ktechlab.kcfg:254 +#, no-c-format +msgid "Dump call tree in .calltree file" +msgstr "" + +#: core/ktechlab.kcfg:258 +#, no-c-format +msgid "Enable stack optimizations" +msgstr "" + +#: core/ktechlab.kcfg:262 +#, no-c-format +msgid "Try to use conditional BRA instead of GOTO" +msgstr "" + +#: core/ktechlab.kcfg:266 +#, no-c-format +msgid "Try to optimize some compares" +msgstr "" + +#: core/ktechlab.kcfg:270 +#, no-c-format +msgid "Thorough data flow analysis" +msgstr "" + +#: core/ktechlab.kcfg:282 +#, no-c-format +msgid "The application to use to program the PIC." +msgstr "" + +#: core/ktechlab.kcfg:286 +#, no-c-format +msgid "The device (serial, parallel, etc...) used to program the PIC." +msgstr "" + +#: gui/asmformattingwidget.ui:16 +#, no-c-format +msgid "Asm Formatting" +msgstr "" + +#: gui/asmformattingwidget.ui:19 +#, no-c-format +msgid "" +"The values control the indentation from the left margin of the various types " +"of assembly code." +msgstr "" + +#: gui/asmformattingwidget.ui:33 +#, no-c-format +msgid "Output Code Indentation" +msgstr "" + +#: gui/asmformattingwidget.ui:44 +#, no-c-format +msgid "'equ' Value" +msgstr "" + +#: gui/asmformattingwidget.ui:52 +#, no-c-format +msgid "Instruction Data" +msgstr "" + +#: gui/asmformattingwidget.ui:60 +#, no-c-format +msgid "Comment" +msgstr "" + +#: gui/asmformattingwidget.ui:68 +#, no-c-format +msgid "'equ'" +msgstr "" + +#: gui/asmformattingwidget.ui:76 +#, no-c-format +msgid "Instruction Name" +msgstr "" + +#: gui/asmformattingwidget.ui:172 +#, no-c-format +msgid "&Automatically format Microbe output" +msgstr "" + +#: gui/asmformattingwidget.ui:175 +#: gui/generaloptionswidget.ui:126 gui/newfilewidget.ui:113 +#: gui/picprogrammerconfigwidget.ui:61 +#: gui/sdccoptionswidget.ui:215 gui/sdccoptionswidget.ui:256 +#, no-c-format +msgid "Alt+A" +msgstr "" + +#: gui/createsubprojectwidget.ui:16 +#, no-c-format +msgid "Create Subproject" +msgstr "" + +#: gui/createsubprojectwidget.ui:35 +#, no-c-format +msgid "Subproject Details" +msgstr "" + +#: gui/createsubprojectwidget.ui:43 +#, no-c-format +msgid "Target File:" +msgstr "" + +#: gui/createsubprojectwidget.ui:51 +#: gui/newpinmappingwidget.ui:30 +#, no-c-format +msgid "Type:" +msgstr "" + +#: gui/createsubprojectwidget.ui:62 +#: gui/linkeroptionswidget.ui:128 +#, no-c-format +msgid "Library" +msgstr "" + +#: gui/generaloptionswidget.ui:30 +#, no-c-format +msgid "Reuse the same output view for code generation" +msgstr "" + +#: gui/generaloptionswidget.ui:41 +#, no-c-format +msgid "Show voltage bars &on electronic components" +msgstr "" + +#: gui/generaloptionswidget.ui:44 +#: gui/gpasmsettingswidget.ui:60 +#: gui/linkeroptionswidget.ui:85 +#: gui/sdccoptionswidget.ui:359 +#, no-c-format +msgid "Alt+O" +msgstr "" + +#: gui/generaloptionswidget.ui:52 +#, no-c-format +msgid "Grid Colour" +msgstr "" + +#: gui/generaloptionswidget.ui:55 +#, no-c-format +msgid "The grid color in the work area." +msgstr "" + +#: gui/generaloptionswidget.ui:63 +#, no-c-format +msgid "Show &grid:" +msgstr "" + +#: gui/generaloptionswidget.ui:66 +#, no-c-format +msgid "Alt+G" +msgstr "" + +#: gui/generaloptionswidget.ui:90 +#, no-c-format +msgid "Maximum undo steps for work area:" +msgstr "" + +#: gui/generaloptionswidget.ui:93 +#, no-c-format +msgid "" +"Maximum undo steps for work area. This doesn't apply to text documents - " +"that is configurable seperately under Configure Editor." +msgstr "" + +#: gui/generaloptionswidget.ui:101 +#, no-c-format +msgid "Convenience" +msgstr "" + +#: gui/generaloptionswidget.ui:112 +#, no-c-format +msgid "Restore opened doc&uments on startup" +msgstr "" + +#: gui/generaloptionswidget.ui:115 +#, no-c-format +msgid "Alt+U" +msgstr "" + +#: gui/generaloptionswidget.ui:123 +#, no-c-format +msgid "Raise the &appropriate item selector on creating a new document" +msgstr "" + +#: gui/generaloptionswidget.ui:134 +#, no-c-format +msgid "Raise the &Messages log when compiling" +msgstr "" + +#: gui/generaloptionswidget.ui:137 +#: gui/picprogrammerconfigwidget.ui:72 +#: gui/sdccoptionswidget.ui:142 gui/sdccoptionswidget.ui:345 +#: gui/sdccoptionswidget.ui:483 +#, no-c-format +msgid "Alt+M" +msgstr "" + +#: gui/generaloptionswidget.ui:147 +#, no-c-format +msgid "Display Refresh Rate" +msgstr "" + +#: gui/generaloptionswidget.ui:186 +#, no-c-format +msgid "Refresh rate:" +msgstr "" + +#: gui/generaloptionswidget.ui:194 +#, no-c-format +msgid "Medium (50 FPS)" +msgstr "" + +#: gui/generaloptionswidget.ui:212 +#, no-c-format +msgid "" +"This is the number of times per second that the work area view is updated; a " +"compromise between CPU usage and smoothness of display." +msgstr "" + +#: gui/gpasmsettingswidget.ui:16 +#, no-c-format +msgid "Gpasm Settings" +msgstr "" + +#: gui/gpasmsettingswidget.ui:33 +#, no-c-format +msgid "Radix (-r):" +msgstr "" + +#: gui/gpasmsettingswidget.ui:41 +#, no-c-format +msgid "Warning level (-w):" +msgstr "" + +#: gui/gpasmsettingswidget.ui:49 +#: gui/linkeroptionswidget.ui:74 +#, no-c-format +msgid "Hex Format (-a):" +msgstr "" + +#: gui/gpasmsettingswidget.ui:57 +#, no-c-format +msgid "Ign&ore case (-i)" +msgstr "" + +#: gui/gpasmsettingswidget.ui:63 +#, no-c-format +msgid "" +"All user defined symbols and macros are case sensitive. This option makes " +"them case insensitive." +msgstr "" + +#: gui/gpasmsettingswidget.ui:71 +#, no-c-format +msgid "Generate DOS-formated hex file (-&n)" +msgstr "" + +#: gui/gpasmsettingswidget.ui:74 +#: gui/sdccoptionswidget.ui:317 +#, no-c-format +msgid "Alt+N" +msgstr "" + +#: gui/gpasmsettingswidget.ui:77 +#, no-c-format +msgid "" +"By default, gpasm generates hex files using ISO format. However, some device " +"programmers required a DOS formatted file. This option will cause gpasm to " +"generate a DOS formatted hex file. " +msgstr "" + +#: gui/gpasmsettingswidget.ui:100 +#: gui/linkeroptionswidget.ui:28 +#, no-c-format +msgid "inhx32" +msgstr "" + +#: gui/gpasmsettingswidget.ui:105 +#: gui/linkeroptionswidget.ui:33 +#, no-c-format +msgid "inhx8m" +msgstr "" + +#: gui/gpasmsettingswidget.ui:110 +#: gui/linkeroptionswidget.ui:38 +#, no-c-format +msgid "inhx8s" +msgstr "" + +#: gui/gpasmsettingswidget.ui:115 +#: gui/linkeroptionswidget.ui:43 +#, no-c-format +msgid "inhx16" +msgstr "" + +#: gui/gpasmsettingswidget.ui:133 +#: gui/linkeroptionswidget.ui:53 +#, no-c-format +msgid "" +"GPASM supports inhx8m, inhx8s, inhx16, and inhx32 hex file formats. This " +"option controls which hex file format is used." +msgstr "" + +#: gui/gpasmsettingswidget.ui:172 +#, no-c-format +msgid "All" +msgstr "" + +#: gui/gpasmsettingswidget.ui:177 +#, no-c-format +msgid "Warnings" +msgstr "" + +#: gui/gpasmsettingswidget.ui:182 +#, no-c-format +msgid "Errors" +msgstr "" + +#: gui/gpasmsettingswidget.ui:197 +#, no-c-format +msgid "" +"This sets the threshold of messages displayed in the log " +"view.<ul><li>\"All\" will display all output - information, warnings and " +"errors.<li>\"Warnings\" will supress messages. <li>\"Errors\" will supress " +"both messages and warnings.</ul>" +msgstr "" + +#: gui/gpasmsettingswidget.ui:256 +#: gui/sdccoptionswidget.ui:560 +#, no-c-format +msgid "Other options:" +msgstr "" + +#: gui/linkeroptionswidget.ui:16 +#, no-c-format +msgid "Linker Options" +msgstr "" + +#: gui/linkeroptionswidget.ui:61 +#, no-c-format +msgid "Library Directory (-I):" +msgstr "" + +#: gui/linkeroptionswidget.ui:82 +#, no-c-format +msgid "&Output a map file (-m)" +msgstr "" + +#: gui/linkeroptionswidget.ui:93 +#, no-c-format +msgid "Linker Script (-s):" +msgstr "" + +#: gui/linkeroptionswidget.ui:111 +#, no-c-format +msgid "Other:" +msgstr "" + +#: gui/linkeroptionswidget.ui:119 +#, no-c-format +msgid "Link libraries inside project" +msgstr "" + +#: gui/logicwidget.ui:30 +#, no-c-format +msgid "Input" +msgstr "" + +#: gui/logicwidget.ui:50 gui/logicwidget.ui:87 +#: gui/logicwidget.ui:148 +#, no-c-format +msgid " V" +msgstr "" + +#: gui/logicwidget.ui:56 gui/logicwidget.ui:107 +#, no-c-format +msgid "Required voltage level before the input will be considered high." +msgstr "" + +#: gui/logicwidget.ui:67 +#, no-c-format +msgid "Falling Trigger Threshold:" +msgstr "" + +#: gui/logicwidget.ui:70 gui/logicwidget.ui:93 +#, no-c-format +msgid "Required voltage level before an input will be considered low." +msgstr "" + +#: gui/logicwidget.ui:104 +#, no-c-format +msgid "Rising Trigger Threshold:" +msgstr "" + +#: gui/logicwidget.ui:117 +#, no-c-format +msgid "Output" +msgstr "" + +#: gui/logicwidget.ui:128 +#, no-c-format +msgid "Output High:" +msgstr "" + +#: gui/logicwidget.ui:131 gui/logicwidget.ui:154 +#, no-c-format +msgid "Voltage level for high on logic components." +msgstr "" + +#: gui/logicwidget.ui:165 +#, no-c-format +msgid "High Output Impedance:" +msgstr "" + +#: gui/logicwidget.ui:168 gui/logicwidget.ui:199 +#, no-c-format +msgid "This is the output impedance when the output is high." +msgstr "" + +#: gui/logicwidget.ui:176 +#, no-c-format +msgid "Low Output Impedance:" +msgstr "" + +#: gui/logicwidget.ui:179 gui/logicwidget.ui:225 +#, no-c-format +msgid "This is the output impedance when the output is low." +msgstr "" + +#: gui/logicwidget.ui:213 +#, no-c-format +msgid "Floating" +msgstr "" + +#: gui/logicwidget.ui:238 +#, no-c-format +msgid "" +"Here, you can configure the behaviour of logic components.\n" +"\n" +"These values will apply to all components, apart from the PIC, whose pins' " +"impedances depend on the pin in use." +msgstr "" + +#: gui/microsettingswidget.ui:38 +#, no-c-format +msgid "Initial Port Settings" +msgstr "" + +#: gui/microsettingswidget.ui:57 +#, no-c-format +msgid "" +"Tip: Toggle the initial state (high/low) of a pin by clicking its picture.\n" +"Drag it to set the type (input/output)." +msgstr "" + +#: gui/microsettingswidget.ui:79 +#, no-c-format +msgid "Initial Variable Values" +msgstr "" + +#: gui/microsettingswidget.ui:119 +#, no-c-format +msgid "Pin Map Definitions" +msgstr "" + +#: gui/microsettingswidget.ui:168 +#, no-c-format +msgid "Modif&y" +msgstr "" + +#: gui/microsettingswidget.ui:171 +#: gui/sdccoptionswidget.ui:48 gui/sdccoptionswidget.ui:176 +#: gui/sdccoptionswidget.ui:461 +#, no-c-format +msgid "Alt+Y" +msgstr "" + +#: gui/microsettingswidget.ui:179 +#, no-c-format +msgid "Rename" +msgstr "" + +#: gui/newfilewidget.ui:19 +#, no-c-format +msgid "" +"Select the type of file you wish to create.<br>\n" +"<p>\n" +"<b>Pic Program</b><br>\n" +"Creates a new PIC program, with flow chart editor. Select the target device " +"for your program below.\n" +"<p>\n" +"<b>Circuit</b><br>\n" +"Creates a new circuit, with drag and drop editor. Real time simulation of " +"the circuit occurs automatically." +msgstr "" + +#: gui/newfilewidget.ui:52 +#, no-c-format +msgid "New File Details" +msgstr "" + +#: gui/newfilewidget.ui:60 +#, no-c-format +msgid "File Type:" +msgstr "" + +#: gui/newfilewidget.ui:110 +#, no-c-format +msgid "&Add to project" +msgstr "" + +#: gui/newpinmappingwidget.ui:38 +#, no-c-format +msgid "Name:" +msgstr "" + +#: gui/newpinmappingwidget.ui:93 +#, no-c-format +msgid "" +"The variable name of the pin mapping - this must be a valid Microbe variable " +"name." +msgstr "" + +#: gui/newpinmappingwidget.ui:104 +#, no-c-format +msgid "Keypad (4x3)" +msgstr "" + +#: gui/newpinmappingwidget.ui:109 +#, no-c-format +msgid "Keypad (4x4)" +msgstr "" + +#: gui/newprojectwidget.ui:16 +#, no-c-format +msgid "New Project" +msgstr "" + +#: gui/newprojectwidget.ui:30 +#, no-c-format +msgid "Final location:" +msgstr "" + +#: gui/newprojectwidget.ui:38 +#, no-c-format +msgid "/" +msgstr "" + +#: gui/newprojectwidget.ui:63 +#, no-c-format +msgid "Location:" +msgstr "" + +#: gui/newprojectwidget.ui:76 +#, no-c-format +msgid "New Project Details" +msgstr "" + +#: gui/newprojectwidget.ui:84 +#, no-c-format +msgid "Project Name:" +msgstr "" + +#: gui/oscilloscopewidget.ui:16 +#, no-c-format +msgid "Form1" +msgstr "" + +#: gui/oscilloscopewidget.ui:112 +#, no-c-format +msgid "Zoom" +msgstr "" + +#: gui/oscilloscopewidget.ui:201 +#, no-c-format +msgid "Reset" +msgstr "" + +#: gui/outputmethodwidget.ui:30 gui/outputmethodwidget.ui:44 +#, no-c-format +msgid "Output Method" +msgstr "" + +#: gui/outputmethodwidget.ui:58 +#, no-c-format +msgid "Displa&y directly" +msgstr "" + +#: gui/outputmethodwidget.ui:69 +#, no-c-format +msgid "Save to file" +msgstr "" + +#: gui/outputmethodwidget.ui:83 +#, no-c-format +msgid "Output File Options" +msgstr "" + +#: gui/outputmethodwidget.ui:99 +#, no-c-format +msgid "Load File in &New View" +msgstr "" + +#: gui/outputmethodwidget.ui:107 +#, no-c-format +msgid "&Add to Project" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:16 +#, no-c-format +msgid "PIC Programmer Config" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:30 +#, no-c-format +msgid "Programmer Configuration" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:58 +#, no-c-format +msgid "&Add ..." +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:69 +#, no-c-format +msgid "Re&move" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:80 +#: gui/programmerwidget.ui:30 +#, no-c-format +msgid "Program:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:104 +#, no-c-format +msgid "(Program Description)" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:114 +#, no-c-format +msgid "Commands" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:125 +#, no-c-format +msgid "Initialization:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:153 +#, no-c-format +msgid "Read:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:161 +#, no-c-format +msgid "Write:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:179 +#, no-c-format +msgid "" +"The following strings will be replaced when the command is run:\n" +"<ul>\n" +"<li><b>%port</b> - Port that the programmer is connected to</li>\n" +"<li><b>%device</b> - PIC device</li>\n" +"<li><b>%file</b> - File to read from or write to</li>\n" +"</ul>" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:195 +#, no-c-format +msgid "Erase:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:203 +#, no-c-format +msgid "Verify:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:211 +#, no-c-format +msgid "Blank Check:" +msgstr "" + +#: gui/picprogrammerconfigwidget.ui:229 +#, no-c-format +msgid "Default port:" +msgstr "" + +#: gui/processingoptionswidget.ui:16 +#, no-c-format +msgid "Processing Options" +msgstr "" + +#: gui/processingoptionswidget.ui:58 +#, no-c-format +msgid "Output File:" +msgstr "" + +#: gui/sdccoptionswidget.ui:16 +#, no-c-format +msgid "SDCC Options" +msgstr "" + +#: gui/sdccoptionswidget.ui:34 +#, no-c-format +msgid "Ge&neral" +msgstr "" + +#: gui/sdccoptionswidget.ui:45 +#, no-c-format +msgid "Don't search in the standard librar&y directory (--nostdlib)" +msgstr "" + +#: gui/sdccoptionswidget.ui:56 +#, no-c-format +msgid "Don't search in the standard include directory (--nostdinc)" +msgstr "" + +#: gui/sdccoptionswidget.ui:67 +#, no-c-format +msgid "Disa&ble pedantic warnings (--less-pedantic)" +msgstr "" + +#: gui/sdccoptionswidget.ui:70 gui/sdccoptionswidget.ui:159 +#: gui/sdccoptionswidget.ui:373 gui/sdccoptionswidget.ui:494 +#, no-c-format +msgid "Alt+B" +msgstr "" + +#: gui/sdccoptionswidget.ui:78 +#, no-c-format +msgid "Use C&89 standard only (--std-c89)" +msgstr "" + +#: gui/sdccoptionswidget.ui:81 +#, no-c-format +msgid "Alt+8" +msgstr "" + +#: gui/sdccoptionswidget.ui:84 +#, no-c-format +msgid "" +"Follow the C89 standard and disable SDCC features that conflict with the " +"standard." +msgstr "" + +#: gui/sdccoptionswidget.ui:92 +#, no-c-format +msgid "Use C&99 standard only (--std-c99)" +msgstr "" + +#: gui/sdccoptionswidget.ui:95 +#, no-c-format +msgid "Alt+9" +msgstr "" + +#: gui/sdccoptionswidget.ui:101 +#, no-c-format +msgid "" +"Follow the C99 standard and disable SDCC features that conflict with the " +"standard (incomplete support)." +msgstr "" + +#: gui/sdccoptionswidget.ui:128 +#, no-c-format +msgid "Code Gener&ation" +msgstr "" + +#: gui/sdccoptionswidget.ui:139 +#, no-c-format +msgid "Stack auto&matic variables (--stack-auto)" +msgstr "" + +#: gui/sdccoptionswidget.ui:148 +#, no-c-format +msgid "" +"All functions in the source file will be compiled as reentrant, i.e. the " +"parameters and local variables will be allocated on the stack. If this " +"option is used all source files in the project should be compiled with this " +"option. It automatically implies -int-long-reent and -float-reent." +msgstr "" + +#: gui/sdccoptionswidget.ui:156 +#, no-c-format +msgid "Integer li&braries were compiled as reentrant (--int-long-reent)" +msgstr "" + +#: gui/sdccoptionswidget.ui:165 +#, no-c-format +msgid "" +"Integer (16 bit) and long (32 bit) libraries have been compiled as " +"reentrant. Note by default these libraries are compiled as non-reentrant." +msgstr "" + +#: gui/sdccoptionswidget.ui:173 +#, no-c-format +msgid "Floating point librar&y was compiled as reentrant (--float-reent)" +msgstr "" + +#: gui/sdccoptionswidget.ui:179 +#, no-c-format +msgid "Floating point library is compiled as reentrant." +msgstr "" + +#: gui/sdccoptionswidget.ui:187 +#, no-c-format +msgid "Leave out the frame pointer (--fommit-frame-pointer)" +msgstr "" + +#: gui/sdccoptionswidget.ui:198 +#, no-c-format +msgid "Don't memcpy initialized &xram from code (--no-xinit-opt)" +msgstr "" + +#: gui/sdccoptionswidget.ui:201 gui/sdccoptionswidget.ui:472 +#, no-c-format +msgid "Alt+X" +msgstr "" + +#: gui/sdccoptionswidget.ui:204 +#, no-c-format +msgid "" +"Will not memcpy initialized data from code space into xdata space. This " +"saves a few bytes in code space if you don't have initialized data." +msgstr "" + +#: gui/sdccoptionswidget.ui:212 +#, no-c-format +msgid "Callee will &always save registers used (--all-callee-saves)" +msgstr "" + +#: gui/sdccoptionswidget.ui:242 +#, no-c-format +msgid "&Optimization" +msgstr "" + +#: gui/sdccoptionswidget.ui:253 +#, no-c-format +msgid "Disable overlaying leaf function &auto variables (--nooverlay)" +msgstr "" + +#: gui/sdccoptionswidget.ui:259 +#, no-c-format +msgid "" +"The compiler will not overlay parameters and local variables of any " +"function, see section Parameters and local variables for more details." +msgstr "" + +#: gui/sdccoptionswidget.ui:267 +#, no-c-format +msgid "Disable the GCSE optimization (--nogcse)" +msgstr "" + +#: gui/sdccoptionswidget.ui:278 +#, no-c-format +msgid "Disable label optimi&zation (--nolabelopt)" +msgstr "" + +#: gui/sdccoptionswidget.ui:281 gui/sdccoptionswidget.ui:505 +#, no-c-format +msgid "Alt+Z" +msgstr "" + +#: gui/sdccoptionswidget.ui:284 +#, no-c-format +msgid "Will not optimize labels (makes the dumpfiles more readable)." +msgstr "" + +#: gui/sdccoptionswidget.ui:292 +#, no-c-format +msgid "Disable optimization of invariants (--noinvariant)" +msgstr "" + +#: gui/sdccoptionswidget.ui:303 +#, no-c-format +msgid "Disable loop variable induction (--noinduction)" +msgstr "" + +#: gui/sdccoptionswidget.ui:314 +#, no-c-format +msgid "Disable peep-hole optimization (--&no-peep)" +msgstr "" + +#: gui/sdccoptionswidget.ui:320 +#, no-c-format +msgid "Disable peep-hole optimization." +msgstr "" + +#: gui/sdccoptionswidget.ui:328 +#, no-c-format +msgid "Disable loop reverse optimization (--noloopreverse)" +msgstr "" + +#: gui/sdccoptionswidget.ui:334 +#, no-c-format +msgid "Will not do loop reversal optimization." +msgstr "" + +#: gui/sdccoptionswidget.ui:342 +#, no-c-format +msgid "Opti&mize for compact code (--opt-code-size)" +msgstr "" + +#: gui/sdccoptionswidget.ui:348 +#, no-c-format +msgid "" +"The compiler will optimize code generation towards compact code, possibly at " +"the expense of code speed." +msgstr "" + +#: gui/sdccoptionswidget.ui:356 +#, no-c-format +msgid "&Optimize for fast code (--opt-code-speed)" +msgstr "" + +#: gui/sdccoptionswidget.ui:362 +#, no-c-format +msgid "" +"The compiler will optimize code generation towards fast code, possibly at " +"the expense of code size." +msgstr "" + +#: gui/sdccoptionswidget.ui:370 +#, no-c-format +msgid "Ena&ble inline assembly peephole optimization (--peep-asm)" +msgstr "" + +#: gui/sdccoptionswidget.ui:376 +#, no-c-format +msgid "" +"Pass the inline assembler code through the peep hole optimizer. This can " +"cause unexpected changes to inline assembler code, please go through the " +"peephole optimizer rules defined in the source file tree " +"'<target>/peeph.def' before using this option." +msgstr "" + +#: gui/sdccoptionswidget.ui:384 +#, no-c-format +msgid "Don't generate boundary check for &jump tables (--nojtbound)" +msgstr "" + +#: gui/sdccoptionswidget.ui:387 +#, no-c-format +msgid "Alt+J" +msgstr "" + +#: gui/sdccoptionswidget.ui:414 +#, no-c-format +msgid "PIC&16 Specific" +msgstr "" + +#: gui/sdccoptionswidget.ui:425 +#, no-c-format +msgid "Don't use default libraries (--nodefaultlibs)" +msgstr "" + +#: gui/sdccoptionswidget.ui:436 +#, no-c-format +msgid "Don't generate BANKSEL directives (--pno-banksel)" +msgstr "" + +#: gui/sdccoptionswidget.ui:447 +#, no-c-format +msgid "Use large stac&k model (--pstack-model=large)" +msgstr "" + +#: gui/sdccoptionswidget.ui:450 +#, no-c-format +msgid "Alt+K" +msgstr "" + +#: gui/sdccoptionswidget.ui:458 +#, no-c-format +msgid "Show more debug info in assembl&y output (--debug-xtra)" +msgstr "" + +#: gui/sdccoptionswidget.ui:469 +#, no-c-format +msgid "E&xplicit enable of peepholes (--denable-peeps)" +msgstr "" + +#: gui/sdccoptionswidget.ui:480 +#, no-c-format +msgid "Du&mp call tree in .calltree file (--calltree)" +msgstr "" + +#: gui/sdccoptionswidget.ui:491 +#, no-c-format +msgid "Ena&ble stack optimizations (--fstack)" +msgstr "" + +#: gui/sdccoptionswidget.ui:502 +#, no-c-format +msgid "Try to use conditional BRA instead of GOTO (--optimi&ze-goto)" +msgstr "" + +#: gui/sdccoptionswidget.ui:513 +#, no-c-format +msgid "Try to optimize some compares (--optimize-cmp)" +msgstr "" + +#: gui/sdccoptionswidget.ui:524 +#, no-c-format +msgid "Thorough data flow analyis (resource intensive) (--optimize-df)" +msgstr "" + +#: ktechlabcircuitui.rc:5 ktechlabflowcodeui.rc:4 +#: ktechlabitemviewui.rc:25 ktechlabkateui.rc:53 +#: ktechlabtextui.rc:14 ktechlabui.rc:34 +#, no-c-format +msgid "&Tools" +msgstr "" + +#: ktechlabcircuitui.rc:8 ktechlabflowcodeui.rc:7 +#, no-c-format +msgid "Routing Mode" +msgstr "" + +#: ktechlabitemviewui.rc:5 ktechlabkateui.rc:5 +#: ktechlabtextui.rc:5 ktechlabui.rc:5 +#, no-c-format +msgid "&File" +msgstr "" + +#: ktechlabitemviewui.rc:10 ktechlabkateui.rc:14 +#, no-c-format +msgid "&Edit" +msgstr "" + +#: ktechlabitemviewui.rc:17 ktechlabkateui.rc:29 +#: ktechlabui.rc:10 +#, no-c-format +msgid "&View" +msgstr "" + +#: ktechlabitemviewui.rc:33 +#, no-c-format +msgid "Tools" +msgstr "" + +#: ktechlabkateui.rc:43 +#, no-c-format +msgid "&Code Folding" +msgstr "" + +#: ktechlabkateui.rc:91 +#, no-c-format +msgid "&Settings" +msgstr "" + +#: ktechlabkateui.rc:114 ktechlabtextui.rc:81 +#, no-c-format +msgid "Main Toolbar" +msgstr "" + +#: ktechlabtextui.rc:52 +#, no-c-format +msgid "&Debug" +msgstr "" + +#: ktechlabtextui.rc:89 +#, no-c-format +msgid "Debugger" +msgstr "" + +#: ktechlabui.rc:18 +#, no-c-format +msgid "&Project" +msgstr "" diff --git a/src/CMakeL10n.txt b/src/CMakeL10n.txt new file mode 100644 index 0000000..4e8b2c5 --- /dev/null +++ b/src/CMakeL10n.txt @@ -0,0 +1,3 @@ +##### create translation templates ############## + +tde_l10n_create_template( "ktechlab" ) |