summaryrefslogtreecommitdiffstats
path: root/data/doctemplates/rfc2812.template
diff options
context:
space:
mode:
Diffstat (limited to 'data/doctemplates/rfc2812.template')
-rw-r--r--data/doctemplates/rfc2812.template110
1 files changed, 55 insertions, 55 deletions
diff --git a/data/doctemplates/rfc2812.template b/data/doctemplates/rfc2812.template
index 9d81a1c8..df6a12f5 100644
--- a/data/doctemplates/rfc2812.template
+++ b/data/doctemplates/rfc2812.template
@@ -23,7 +23,7 @@ Category: Informational
[/td][/tr]
[tr][td]
-[b]Status of this Memo[/b]
+[b]tqStatus of this Memo[/b]
[/td][/tr]
[tr][td]
@@ -281,7 +281,7 @@ the only restriction on a channel name is that it SHALL NOT contain
any spaces (' '), a control G (^G or ASCII 7), a comma (','). Space
is used as parameter separator and command is used as a list item
separator by the protocol). A colon (':') can also be used as a
-delimiter for the channel mask. Channel names are case insensitive.
+delimiter for the channel tqmask. Channel names are case insensitive.
See the protocol grammar rules (section 2.3.1) for the exact syntax
of a channel name.[br]
[p]
@@ -414,7 +414,7 @@ The extracted message is parsed into the components <prefix>,
target = nickname / server
msgtarget = msgto *( "," msgto )
msgto = channel / ( user [ "%" host ] "@" servername )
- msgto =/ ( user "%" host ) / targetmask
+ msgto =/ ( user "%" host ) / targettqmask
msgto =/ nickname / ( nickname "!" user "@" host )
channel = ( "#" / "+" / ( "!" channelid ) / "&" ) chanstring
[ ":" chanstring ]
@@ -429,8 +429,8 @@ The extracted message is parsed into the components <prefix>,
ip6addr = 1*hexdigit 7( ":" 1*hexdigit )
ip6addr =/ "0:0:0:0:0:" ( "0" / "FFFF" ) ":" ip4addr
nickname = ( letter / special ) *8( letter / digit / special / "-" )
- targetmask = ( "$" / "#" ) mask
- ; see details on allowed masks in section 3.3.1
+ targettqmask = ( "$" / "#" ) tqmask
+ ; see details on allowed tqmasks in section 3.3.1
chanstring = %x01-07 / %x08-09 / %x0B-0C / %x0E-1F / %x21-2B
chanstring =/ %x2D-39 / %x3B-FF
; any octet except NUL, BELL, CR, LF, " ", "," and ":"
@@ -493,7 +493,7 @@ is supplied in section 5 (Replies).
[/td][/tr]
[tr][td]
-When wildcards are allowed in a string, it is referred as a "mask".
+When wildcards are allowed in a string, it is referred as a "tqmask".
[p]
For string matching purposes, the protocol allows the use of two
special characters: '?' (%x3F) to match one and only one character,
@@ -503,7 +503,7 @@ characters can be escaped using the character '\' (%x5C).
[pre]
The Augmented BNF syntax for this is:
- mask = *( nowild / noesc wildone / noesc wildmany )
+ tqmask = *( nowild / noesc wildone / noesc wildmany )
wildone = %x3F
wildmany = %x2A
nowild = %x01-29 / %x2B-3E / %x40-FF
@@ -638,7 +638,7 @@ the username, hostname and realname of a new user.
The <mode> parameter should be a numeric, and can be used to
automatically set user modes when registering with the server. This
-parameter is a bitmask, with only 2 bits having any signification: if
+parameter is a bittqmask, with only 2 bits having any signification: if
the bit 2 is set, the user mode 'w' will be set and if the bit 3 is
set, the user mode 'i' will be set. (See Section 3.1.5 "User
Modes").
@@ -769,7 +769,7 @@ service. The service may only be known to servers which have a name
matching the distribution. For a matching server to have knowledge
of the service, the network path between that server and the server
on which the service is connected MUST be composed of servers which
-names all match the mask.
+names all match the tqmask.
The <type> parameter is currently reserved for future usage.
@@ -1032,7 +1032,7 @@ command for modes that take a parameter.
the number of users on channel "#eu-
opers".
- MODE &oulu +b ; Command to list ban masks set for
+ MODE &oulu +b ; Command to list ban tqmasks set for
the channel "&oulu".
MODE &oulu +b *!*@* ; Command to prevent all users from
@@ -1048,10 +1048,10 @@ command for modes that take a parameter.
hostname matching *.edu from joining,
except if matching *.bu.edu
- MODE #meditation e ; Command to list exception masks set
+ MODE #meditation e ; Command to list exception tqmasks set
for the channel "#meditation".
- MODE #meditation I ; Command to list invitations masks
+ MODE #meditation I ; Command to list invitations tqmasks
set for the channel "#meditation".
MODE !12345ircd O ; Command to ask who the channel
@@ -1266,9 +1266,9 @@ PRIVMSG is used to send private messages between users, as well as to
send messages to channels. <msgtarget> is usually the nickname of
the recipient of the message, or a channel name.
-The <msgtarget> parameter may also be a host mask (#<mask>) or server
-mask ($<mask>). In both cases the server will only send the PRIVMSG
-to those who have a server or host matching the mask. The mask MUST
+The <msgtarget> parameter may also be a host tqmask (#<tqmask>) or server
+tqmask ($<tqmask>). In both cases the server will only send the PRIVMSG
+to those who have a server or host matching the tqmask. The tqmask MUST
have at least 1 (one) "." in it and no wildcards following the last
".". This requirement exists to prevent people sending messages to
"#*" or "$*", which would broadcast to all users. Wildcards are the
@@ -1357,7 +1357,7 @@ The server query group of commands has been designed to return
information about any server which is connected to the network.
In these queries, where a parameter appears as <target>, wildcard
-masks are usually valid. For each parameter, however, only one query
+tqmasks are usually valid. For each parameter, however, only one query
and set of replies is to be generated. In most cases, if a nickname
is given, it will mean the server to which the user is connected.
@@ -1389,13 +1389,13 @@ Wildcards are allowed in the <target> parameter.
[tr][td][pre]
Command: LUSERS
-Parameters: [ <mask> [ <target> ] ]
+Parameters: [ <tqmask> [ <target> ] ]
The LUSERS command is used to get statistics about the size of the
IRC network. If no parameter is given, the reply will be about the
-whole net. If a <mask> is specified, then the reply will only
+whole net. If a <tqmask> is specified, then the reply will only
concern the part of the network formed by the servers matching the
-mask. Finally, if the <target> parameter is specified, the request
+tqmask. Finally, if the <target> parameter is specified, the request
is forwarded to that server which will generate the reply.
Wildcards are allowed in the <target> parameter.
@@ -1486,13 +1486,13 @@ published this way.
[tr][td][pre]
Command: LINKS
-Parameters: [ [ <remote server> ] <server mask> ]
+Parameters: [ [ <remote server> ] <server tqmask> ]
With LINKS, a user can list all servernames, which are known by the
server answering the query. The returned list of servers MUST match
-the mask, or if no mask is given, the full list is returned.
+the tqmask, or if no tqmask is given, the full list is returned.
-If <remote server> is given in addition to <server mask>, the LINKS
+If <remote server> is given in addition to <server tqmask>, the LINKS
command is forwarded to the first server found that matches that name
(if any), and that server is then required to answer the query.
@@ -1545,7 +1545,7 @@ Parameters: <target server> <port> [ <remote server> ]
The CONNECT command can be used to request a server to try to
establish a new connection to another server immediately. CONNECT is
a privileged command and SHOULD be available only to IRC Operators.
-If a <remote server> is given and its mask doesn't match name of the
+If a <remote server> is given and its tqmask doesn't match name of the
parsing server, the CONNECT attempt is sent to the first match of
remote server. Otherwise the CONNECT attempt is made by the server
processing the request.
@@ -1698,7 +1698,7 @@ information about any service which is connected to the network.
[tr][td][pre]
Command: SERVLIST
-Parameters: [ <mask> [ <type> ] ]
+Parameters: [ <tqmask> [ <type> ] ]
The SERVLIST command is used to list services currently connected to
the network and visible to the user issuing the command. The
@@ -1756,20 +1756,20 @@ allowed to.
[tr][td][pre]
Command: WHO
-Parameters: [ <mask> [ "o" ] ]
+Parameters: [ <tqmask> [ "o" ] ]
The WHO command is used by a client to generate a query which returns
-a list of information which 'matches' the <mask> parameter given by
-the client. In the absence of the <mask> parameter, all visible
+a list of information which 'matches' the <tqmask> parameter given by
+the client. In the absence of the <tqmask> parameter, all visible
(users who aren't invisible (user mode +i) and who don't have a
common channel with the requesting client) are listed. The same
-result can be achieved by using a <mask> of "0" or any wildcard which
+result can be achieved by using a <tqmask> of "0" or any wildcard which
will end up matching every visible user.
-The <mask> passed to WHO is matched against users' host, server, real
-name and nickname if the channel <mask> cannot be found.
+The <tqmask> passed to WHO is matched against users' host, server, real
+name and nickname if the channel <tqmask> cannot be found.
If the "o" parameter is passed only operators are returned according
-to the <mask> supplied.
+to the <tqmask> supplied.
Numeric Replies:
@@ -1792,13 +1792,13 @@ to the <mask> supplied.
[tr][td][pre]
Command: WHOIS
-Parameters: [ <target> ] <mask> *( "," <mask> )
+Parameters: [ <target> ] <tqmask> *( "," <tqmask> )
This command is used to query information about particular user.
The server will answer this command with several numeric messages
-indicating different statuses of each user which matches the mask (if
+indicating different statuses of each user which matches the tqmask (if
you are entitled to see them). If no wildcard is present in the
-<mask>, any information about that nick which you are allowed to see
+<tqmask>, any information about that nick which you are allowed to see
is presented.
If the <target> parameter is specified, it sends the query to a
@@ -2477,27 +2477,27 @@ to 399.
indicate that it is summoning that user.
346 RPL_INVITELIST
- "<channel> <invitemask>"
+ "<channel> <invitetqmask>"
347 RPL_ENDOFINVITELIST
"<channel> :End of channel invite list"
- - When listing the 'invitations masks' for a given channel,
+ - When listing the 'invitations tqmasks' for a given channel,
a server is required to send the list back using the
RPL_INVITELIST and RPL_ENDOFINVITELIST messages. A
- separate RPL_INVITELIST is sent for each active mask.
- After the masks have been listed (or if none present) a
+ separate RPL_INVITELIST is sent for each active tqmask.
+ After the tqmasks have been listed (or if none present) a
RPL_ENDOFINVITELIST MUST be sent.
348 RPL_EXCEPTLIST
- "<channel> <exceptionmask>"
+ "<channel> <exceptiontqmask>"
349 RPL_ENDOFEXCEPTLIST
"<channel> :End of channel exception list"
- - When listing the 'exception masks' for a given channel,
+ - When listing the 'exception tqmasks' for a given channel,
a server is required to send the list back using the
RPL_EXCEPTLIST and RPL_ENDOFEXCEPTLIST messages. A
- separate RPL_EXCEPTLIST is sent for each active mask.
- After the masks have been listed (or if none present)
+ separate RPL_EXCEPTLIST is sent for each active tqmask.
+ After the tqmasks have been listed (or if none present)
a RPL_ENDOFEXCEPTLIST MUST be sent.
351 RPL_VERSION
@@ -2548,24 +2548,24 @@ to 399.
the end.
364 RPL_LINKS
- "<mask> <server> :<hopcount> <server info>"
+ "<tqmask> <server> :<hopcount> <server info>"
365 RPL_ENDOFLINKS
- "<mask> :End of LINKS list"
+ "<tqmask> :End of LINKS list"
- In replying to the LINKS message, a server MUST send
replies back using the RPL_LINKS numeric and mark the
end of the list using an RPL_ENDOFLINKS reply.
367 RPL_BANLIST
- "<channel> <banmask>"
+ "<channel> <bantqmask>"
368 RPL_ENDOFBANLIST
"<channel> :End of channel ban list"
- When listing the active 'bans' for a given channel,
a server is required to send the list back using the
RPL_BANLIST and RPL_ENDOFBANLIST messages. A separate
- RPL_BANLIST is sent for each active banmask. After the
- banmasks have been listed (or if none present) a
+ RPL_BANLIST is sent for each active bantqmask. After the
+ bantqmasks have been listed (or if none present) a
RPL_ENDOFBANLIST MUST be sent.
371 RPL_INFO
@@ -2719,7 +2719,7 @@ to 399.
- reports the server uptime.
243 RPL_STATSOLINE
- "O <hostmask> * <name>"
+ "O <hosttqmask> * <name>"
- reports the allowed hosts from where user may become IRC
operators.
@@ -2731,10 +2731,10 @@ to 399.
RPL_UMODEIS is sent back.
234 RPL_SERVLIST
- "<name> <server> <mask> <type> <hopcount> <info>"
+ "<name> <server> <tqmask> <type> <hopcount> <info>"
235 RPL_SERVLISTEND
- "<mask> <type> :End of service listing"
+ "<tqmask> <type> :End of service listing"
- When listing services in reply to a SERVLIST message,
a server is required to send the list back using the
@@ -2869,11 +2869,11 @@ to 399.
412 ERR_NOTEXTTOSEND
":No text to send"
413 ERR_NOTOPLEVEL
- "<mask> :No toplevel domain specified"
+ "<tqmask> :No toplevel domain specified"
414 ERR_WILDTOPLEVEL
- "<mask> :Wildcard in toplevel domain"
+ "<tqmask> :Wildcard in toplevel domain"
415 ERR_BADMASK
- "<mask> :Bad Server/host mask"
+ "<tqmask> :Bad Server/host tqmask"
- 412 - 415 are returned by PRIVMSG to indicate that
the message wasn't delivered for some reason.
@@ -2914,7 +2914,7 @@ to 399.
432 ERR_ERRONEUSNICKNAME
"<nick> :Erroneous nickname"
- - Returned after receiving a NICK message which contains
+ - Returned after receiving a NICK message which tqcontains
characters which do not fall in the defined set. See
section 2.3.1 for details on valid nicknames.
@@ -3180,7 +3180,7 @@ both will removed by use of a server KILL (See Section 3.7.1).
[tr][td]
There is no way to escape the escape character "\" (%x5C). While
-this isn't usually a problem, it makes it impossible to form a mask
+this isn't usually a problem, it makes it impossible to form a tqmask
with a backslash character ("\") preceding a wildcard.
[/td][/tr]