diff options
Diffstat (limited to 'doc/misc/vpnc-0.3.1-strings.txt')
| -rw-r--r-- | doc/misc/vpnc-0.3.1-strings.txt | 622 |
1 files changed, 0 insertions, 622 deletions
diff --git a/doc/misc/vpnc-0.3.1-strings.txt b/doc/misc/vpnc-0.3.1-strings.txt deleted file mode 100644 index d86e142..0000000 --- a/doc/misc/vpnc-0.3.1-strings.txt +++ /dev/null @@ -1,622 +0,0 @@ -/lib/ld-linux.so.2 -SuSE -libgcrypt.so.11 -gcry_md_get_algo_dlen -gcry_mpi_scan -gcry_md_close -gcry_mpi_get_nbits -gcry_md_read -gcry_md_setkey -gcry_mpi_copy -gcry_mpi_powm -gcry_control -gcry_randomize -gcry_md_write -gcry_mpi_mul_2exp -gcry_cipher_open -gcry_cipher_ctl -gcry_md_hash_buffer -gcry_cipher_close -gcry_cipher_algo_info -gcry_free -gcry_mpi_add_ui -gcry_cipher_encrypt -gcry_md_open -gcry_check_version -gcry_mpi_set_ui -gcry_cipher_decrypt -gcry_mpi_new -gcry_mpi_release -_Jv_RegisterClasses -gcry_md_ctl -gcry_mpi_aprint -__gmon_start__ -libgpg-error.so.0 -_DYNAMIC -_init -_fini -_GLOBAL_OFFSET_TABLE_ -libc.so.6 -putchar -strcpy -unsetenv -ioctl -stdout -connect -getenv -__strtol_internal -getpid -__getdelim -memcpy -perror -puts -getpass -system -feof -malloc -recvfrom -socket -fflush -strncasecmp -abort -uname -calloc -fprintf -strcat -bind -chdir -setsockopt -stdin -signal -openlog -strncmp -strncpy -strcasecmp -sendto -realloc -__strdup -fork -inet_aton -memset -inet_ntoa -time -__assert_fail -poll -syslog -gethostbyname -asprintf -fclose -stderr -fwrite -__errno_location -inet_ntop -fopen -_IO_stdin_used -_exit -__libc_start_main -strchr -setsid -getsockname -_edata -__bss_start -_end -GLIBC_2.1 -GLIBC_2.0 -GCRYPT_1.2 -PTRh -QVh\ -jyh&% -jzh&% -[^_] -[^_] -[^_] -Pht% -[^_] -[^_] -[^_] -[^_] -[^_] -;BDt -Ph)& -pDSh<& -[^_] -wDPS -[^_] -[^_] -[^_] -rDPS -[^_] -[^_] -Pht& -Sh}& -;BDt -;FDt -qDPh -PVh!' -rDPS -q4h2' -rDPS -q0h;' -C(;CD -CD;C( -w$hM' -G@;GDv -v@PS -vLhv' -[^_] -Ph4( -[^_] -Ph|, -Vhz( -Vhm( -Ph0) -Ph|, -PhL) -[^_] -[^_] -[^_] -Pha) -Ph - -PSh!' -[^_] -Vh0. -ShK. -[^_] -F PS -F PS -F PS -[^_] -[^_] -[^_] -[^_] -[^_] -Ph(/ -G Ph1/ -Ph;/ -PhL/ -G PhU/ -Phb/ -G Phj/ -Phv/ -G PhU/ -[^_] -Sht& -Ph!0 -Ph*0 -Ph20 -PhA0 -PhO0 -PhU0 -Phr' -[^_] -C Pj -Ph < -[^_] -C Pj -Ph < -[^_] -PhH> -;V(t< -9Z8u -9B`t -[^_] -SQhx> -pHSh -pHSj -[^_] -[^_] -[^_] -Php= -[^_] -P`Qh o -p8hh? -Ph,) -PhLn - hHn -PRh1@ -PRh;@ -7RhE@ - PRhO@ -;PhU@ -[^_] -[^_] -VWhPD -[^_] -RhFD -Ph]D -[^_] -[^_] -[^_] -[^_] -[^_] -[^_] -[^_] -nopfs -sha1 -3des -aes128 -aes192 -aes256 -get_algo -vpnc.c -what <= SUPP_ALGO_CRYPT -key <= SUPP_ALGO_IPSEC_SA -server -making socket -binding to port %d -out of memory -unknown host `%s' -using interface %s -TUNDEV -VPNGATEWAY -receiving packet -can't send packet -can't poll socket -no response from target -hashlen: %lu -u.hash.length: %d -expected_hash -h->u.hash.data -authing NULL package! -S4.1 -i_cookie -i_nonce -S4.2 -dh_public -S4.3 -S4.4 -response was invalid [1]: %s -IKE SA selected %s-%s -response was invalid [2]: %s -response was invalid [3]: %s -skeyid -returned_hash -dh_shared_secret -skeyid_d -skeyid_a -skeyid_e -enc-key -do_phase_1 -s->ivlen <= s->md_len -current_iv -S4.5 -NAT status: no NAT-T VID seen -initial_iv -S4.6 -S5.1 -S5.2 -malformed loadbalance target -S5.3 -S5.4 -%c%c -%.*s%s -S5.5 -xauth packet unsupported: %s -Answer -Password -Passcode -%s for VPN %s@%s: -S5.6 -authentication unsuccessful -S5.7 -CISCO_BANNER -CISCO_DEF_DOMAIN -INTERNAL_IP4_NBNS -INTERNAL_IP4_DNS -INTERNAL_IP4_NETMASK -INTERNAL_IP4_ADDRESS -ignoring zero length netmask -Banner: -Remote Application Version: -got pfs setting: %d -unknown attriube %d / 0x%X -got address %s -S7.1 -len = %d -S7.2 -S7.3 -S7.4 -S7.5 -S7.6 -IPSEC SA selected %s-%s -S7.7 -S7.8 -S7.9 -S7.10 -1.1.90 -hex_test -vpnc version 0.3.1 -can't initialise tunnel interface -got response from unknown host %s:%d -NAT-T mode, adding non-esp marker ----!!!!!!!!! entering phase2_fatal !!!!!!!!!--- -generating %d bytes keymat (cnt=%d) -unknown attribute %d, arborting.. -hash comparison failed: %s -check group password! -NAT status: this end behind NAT? %s -- remote end behind NAT? %s -NAT status: NAT-T VID seen, no NAT device detected -got cisco loadbalancing notice, diverting to %s -got responder liftime notice, ignoring.. -expected xauth packet; rejected: %s -server requested domain, but none set (use "Domain ..." in config or --domain -xauth SET response rejected: %s -configuration response rejected: %s -got peer udp encapsulation port: %hu -ignoring responder-lifetime notify -quick mode response rejected: %s -check pfs setting -quick mode response rejected [2]: %s -; H_ -malloc of %lu bytes failed -alloc of %lud bytes failed -flatten_isakmp_packet -isakmp-pkt.c -blksz != 0 -t.attributes.type -t.attributes.u.attr_16 -t.attributes.u.lots.length -(not dumping xauth data) -t.attributes.u.lots.data -next_type -sa.doi -sa.situation -p.number -p.prot_id -p.spi_size -p.spi -t.number -t.id -ke.data -id.type -id.protocol -id.port -id.data -cert.encoding -cert.data -n.doi -n.protocol -n.spi_length -n.type -n.spi -n.data -d.num_spi -d.spi -modecfg.type -UNKNOWN.data -DONE PARSING PAYLOAD type -BEGIN_PARSE -r_cookie -payload -isakmp_version -exchange_type -flags -message_id -PARSE_OK -INVALID_PAYLOAD_TYPE -DOI_NOT_SUPPORTED -SITUATION_NOT_SUPPORTED -INVALID_COOKIE -INVALID_MAJOR_VERSION -INVALID_MINOR_VERSION -INVALID_EXCHANGE_TYPE -INVALID_FLAGS -INVALID_MESSAGE_ID -INVALID_PROTOCOL_ID -INVALID_SPI -INVALID_TRANSFORM_ID -ATTRIBUTES_NOT_SUPPORTED -NO_PROPOSAL_CHOSEN -BAD_PROPOSAL_SYNTAX -PAYLOAD_MALFORMED -INVALID_KEY_INFORMATION -INVALID_ID_INFORMATION -INVALID_CERT_ENCODING -INVALID_CERTIFICATE -CERT_TYPE_UNSUPPORTED -INVALID_CERT_AUTHORITY -INVALID_HASH_INFORMATION -AUTHENTICATION_FAILED -INVALID_SIGNATURE -ADDRESS_NOTIFICATION -NOTIFY_SA_LIFETIME -CERTIFICATE_UNAVAILABLE -UNSUPPORTED_EXCHANGE_TYPE -UNEQUAL_PAYLOAD_LENGTHS -|S5v -size = %ld, blksz = %ld, padding = %ld - sending: ========================> -(not dumping xauth data length) -recvfrom: %m -packet too short from %s -truncated in: %d -> %d -socket(SOCK_RAW) -setsockopt(IP_HDRINCL) -ipesp -udpesp -socket: %m -connect: %m -getsockname: %m -local address for %s is %s -unknown spi %ld -hmac_compute -tunip.c -md_ctx != 0 -ret == 0 -sending ESP packet (after ah) -sendto: %m -truncated out (%d out of %d) -Packet too short -HMAC mismatch in ESP mode -Inconsistent padlen -Inconsistent next_header %d -Bad padding -poll: %m -read: %m -routing loop to %s -unknown spi from %s -terminated -tous.enc_secret -tous.auth_secret -tothem.enc_secret -tothem.auth_secret -vpnc -VPNC started in foreground... -can't find a local address for packets to %s -sending packet: len = %d, padding = %lu -sending ESP packet (before crypt) -sending ESP packet (after crypt) -truncated out (%Zd out of %Zd) -payload len %d not a multiple of algorithm block size %lu -peer hasn't a known address yet -spi %ld: remote address changed from %s to %s -received update probe from peer -can't open pidfile %s for writing -Warning, could not fork the child process! -VPNC started in background (pid: %d)... -%s: %02x -%s: %04x -%s: %08x -%s:%c -%02x -default value for this option -10000 -commandline option, -configfile variable, -argument type -description ---gateway -IPSec gateway -<ip/hostname> -IP/name of your IPSec gateway ---id -IPSec ID -<ASCII string> -your group name -IPSec secret ---username -Xauth username -your username -Xauth password ---udp -UDP Encapsulate ---domain -Domain ---xauth-inter -Xauth interactive ---script -Config Script -<command> ---dh -IKE DH Group -<dh1/dh2/dh5> -name of the IKE DH Group ---pfs -Perfect Forward Secrecy -<nopfs/dh1/dh2/dh5/server> ---enable-1des -Enable Single DES ---application-version -Application version -Application Version to report ---ifname -Interface name ---debug -Debug -<0/1/2/3/99> -Show verbose debug messages ---no-detach -No Detach ---pid-file -Pidfile -<filename> ---local-port -Local Port -<0-65535> ---udp-port -UDP Encapsulation Port ---disable-natt -Disable NAT Traversal -disable use of NAT-T ---non-inter -Noninteractive -couldn't open `%s' -reading `%s' -can't allocate memory -%s%.*s -Legend: -(configfile only option) - %s %s - %s%s - - Default: %s -Supported DH-Groups: -Supported Hash-Methods: -Supported Encryptions: ---version ---print-config ---help ---long-help -%s: unknown option %s -/etc/vpnc/default.conf -/etc/vpnc.conf -Enter IPSec gateway address: -Enter IPSec ID for %s: -Enter username for %s: -Enter password for %s@%s: -vpnc.conf: -missing IPSec gatway address -missing IPSec ID -missing IPSec secret -missing Xauth username -missing Xauth password -Cisco Systems VPN Client %s:%s -your group password (cleartext, no support for obfuscated strings) -your password (cleartext, no support for obfuscated strings) -Use Cisco-UDP encapsulation of IPSEC traffic -(NT-) Domain name for authentication -enable interactive extended authentication (for challange response auth) -command is executed using system() to configure the interface, -routing and so on. Device name, IP, etc. are passed using enviroment -variables, see README. This script is executed right after ISAKMP is -done, but befor tunneling is enabled. -Diffie-Hellman group to use for PFS -enables weak single DES encryption -visible name of the TUN interface -Don't detach from the console after login -store the pid of background process in <filename> -local ISAKMP port number to use (0 == use random port) -local UDP port number to use (0 == use random port) -Don't ask anything, exit on missing options -warning: unknown configuration directive in %s at line %d -Usage: %s [--version] [--print-config] [--help] [--long-help] [options] [config file] -Report bugs to vpnc@unix-ag.uni-kl.de -Copyright (C) 2002-2004 Geoffrey Keating, Maurice Massar -vpnc comes with NO WARRANTY, to the extent permitted by law. -You may redistribute copies of vpnc under the terms of the GNU General -Public License. For more information about these matters, see the files -named COPYING. -WARNING! active debug level is >= 99, output includes username and password (hex encoded) -WARNING! active debug level is >= 99, output includes username and password (hex encoded) -Enter IPSec secret for %s@%s: -IKE DH Group "%s" unsupported -Perfect Forward Secrecy "%s" unsupported -IKE DH Group must not be nopfs -/dev/net/tun -can't open /dev/net/tun, check that it is either device char 10 200 or (with DevFS) a symlink to ../misc/net/tun (not misc/net/tun) -ifconfig $TUNDEV inet $INTERNAL_IP4_ADDRESS pointopoint $INTERNAL_IP4_ADDRESS netmask 255.255.255.255 mtu 1412 up -FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A63A3620FFFFFFFFFFFFFFFF -FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE65381FFFFFFFFFFFFFFFF -FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3DC2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F83655D23DCA3AD961C62F356208552BB9ED529077096966D670C354E4ABC9804F1746C08CA237327FFFFFFFFFFFFFFFF -id <= (int)(sizeof(groups) / sizeof(groups[0])) -group_init -math_group.c -groups[i].type == MODP -group_get -id >= 1 -clone->type == MODP -group_free -grp->type == MODP -modp_clone -new_grp -modp_init |