path: root/classes/ssl/ssl_vncviewer

#!/bin/sh
#
# ssl_vncviewer:  wrapper for vncviewer to use an stunnel SSL tunnel
#                 or an SSH tunnel.
#
# Copyright (c) 2006 by Karl J. Runge <runge@karlrunge.com>
#
# You must have stunnel(8) installed on the system and in your PATH
# (however, see the -ssh option below, in which case you will need ssh(1)
# installed)  Note: stunnel is usually installed in an "sbin" subdirectory.
#
# You should have "x11vnc -ssl ..." or "x11vnc -stunnel ..." 
# already running as the VNC server on the remote machine.
# (or use stunnel on the server side for any other VNC server)
#
#
# Usage: ssl_vncviewer [cert-args] host:display <vncviewer-args>
#
# e.g.:  ssl_vncviewer snoopy:0
#        ssl_vncviewer snoopy:0 -encodings "copyrect tight zrle hextile"
#
# [cert-args] can be:
#
#	-verify /path/to/cacert.pem		
#	-mycert /path/to/mycert.pem		
#	-proxy  host:port
#
# -verify specifies a CA cert PEM file (or a self-signed one) for
#         authenticating the VNC server.
#
# -mycert specifies this client's cert+key PEM file for the VNC server to
#	  authenticate this client. 
#
# -proxy  try host:port as a Web proxy to use the CONNECT method
#         to reach the VNC server (e.g. your firewall requires a proxy).
#         For the "double proxy" case use -proxy host1:port1,host2:port2
#
#    See http://www.karlrunge.com/x11vnc/#faq-ssl-ca for details on SSL
#    certificates with VNC.
#
# A few other args (not related to SSL and certs):
#
# -ssh    Use ssh instead of stunnel SSL.  ssh(1) must be installed and you
#         must be able to log into the remote machine via ssh.
#
#         In this case "host:display" may be of the form "user@host:display"
#         where "user@host" is used for the ssh login (see ssh(1) manpage).
#
#         If -proxy is supplied it can be of the forms: "gwhost" "gwhost:port"
#         "user@gwhost" or "user@gwhost:port".  "gwhost" is an incoming ssh 
#         gateway machine (the VNC server is not running there), an ssh -L
#         redir is used to "host" in "host:display" from "gwhost". Any "user@"
#         part must be in the -proxy string (not in "host:display").
#
#         Under -proxy use "gwhost:port" if connecting to any ssh port
#         other than the default (22).  (even for the non-gateway case,
#         -proxy must be used to specify a non-standard ssh port)
#
#         Examples:
#
#         ssl_vncviewer -ssh bob@bobs-home.net:0
#         ssl_vncviewer -ssh -sshcmd 'x11vnc -localhost' bob@bobs-home.net:0
#
#         ssl_vncviewer -ssh -proxy fred@mygate.com:2022 mymachine:0
#         ssl_vncviewer -ssh -proxy bob@bobs-home.net:2222 localhost:0
#
# -sshcmd cmd   Run "cmd" via ssh instead of the default "sleep 15"
#               e.g. -sshcmd 'x11vnc -display :0 -localhost -rfbport 5900'
#
# -sshargs "args"  pass "args" to the ssh process, e.g. -L/-R port redirs.
#
# -sshssl Tunnel the SSL connection thru a SSH connection.  The tunnel as
#         under -ssh is set up and the SSL connection goes thru it.  Use
#         this if you want to have and end-to-end SSL connection but must
#         go thru a SSH gateway host (e.g. not the vnc server).  Or use
#         this if you need to tunnel additional services via -R and -L 
#         (see -sshargs above).
#
#         ssl_vncviewer -sshssl -proxy fred@mygate.com mymachine:0
#
#
# -alpha  turn on cursor alphablending hack if you are using the
#         enhanced tightvnc vncviewer.
#
# -grab   turn on XGrabServer hack if you are using the enhanced tightvnc
#         vncviewer (e.g. for fullscreen mode in some windowmanagers like
#         fvwm that do not otherwise work in fullscreen mode)
#
#
# set VNCVIEWERCMD to whatever vncviewer command you want to use.
#
VNCIPCMD=${VNCVIEWERCMD:-vncip}
VNCVIEWERCMD=${VNCVIEWERCMD:-vncviewer}
#
# Same for STUNNEL, e.g. set it to /path/to/stunnel or stunnel4, etc.
#


PATH=$PATH:/usr/sbin:/usr/local/sbin:/dist/sbin; export PATH

if [ "X$STUNNEL" = "X" ]; then
	type stunnel4 > /dev/null 2>&1
	if [ $? = 0 ]; then
		STUNNEL=stunnel4
	else
		STUNNEL=stunnel
	fi
fi

help() {
	tail +2 "$0" | sed -e '/^$/ q'
}

gotalpha=""
use_ssh=""
use_sshssl=""
ssh_sleep=15
ssh_cmd="sleep $ssh_sleep"
if [ "X$SSL_VNCVIEWER_SSH_CMD" != "X" ]; then
	ssh_cmd="$SSL_VNCVIEWER_SSH_CMD"
fi
ssh_args=""

# grab our cmdline options:
while [ "X$1" != "X" ]
do
    case $1 in 
	"-verify")	shift; verify="$1"
                ;;
	"-mycert")	shift; mycert="$1"
                ;;
	"-proxy")	shift; proxy="$1"
                ;;
	"-ssh")		use_ssh=1
                ;;
	"-sshssl")	use_ssh=1
			use_sshssl=1
                ;;
	"-sshcmd")	shift; ssh_cmd="$1"
                ;;
	"-sshargs")	shift; ssh_args="$1"
                ;;
	"-alpha")	gotalpha=1
                ;;
	"-grab")	VNCVIEWER_GRAB_SERVER=1; export VNCVIEWER_GRAB_SERVER
                ;;
	"-h"*)	help; exit 0
                ;;
	"--h"*)	help; exit 0
                ;;
	*)	break
                ;;
    esac
    shift
done

if [ "X$gotalpha" != "X1" ]; then
	NO_ALPHABLEND=1
	export NO_ALPHABLEND
fi

orig="$1"
shift

if [ "X$use_ssh" = "X1" -a "X$use_sshssl" = "X" ]; then
	if [ "X$mycert" != "X" -o "X$verify" != "X" ]; then
		echo "-mycert and -verify cannot be used in -ssh mode" 
		exit 1
	fi
fi

# play around with host:display port:
if echo "$orig" | grep ':' > /dev/null; then
	:
else
	orig="$orig:0"
fi

host=`echo "$orig" | awk -F: '{print $1}'`
disp=`echo "$orig" | awk -F: '{print $2}'`
if [ "X$host" = "X" ]; then
	host=localhost
fi
if [ $disp -lt 200 ]; then
	port=`expr $disp + 5900`
else
	port=$disp
fi

# try to find an open listening port via netstat(1):
inuse=""
if uname | grep Linux > /dev/null; then
	inuse=`netstat -ant | egrep 'LISTEN|WAIT|ESTABLISH|CLOSE' | awk '{print $4}' | sed 's/^.*://'`
elif uname | grep SunOS > /dev/null; then
	inuse=`netstat -an -f inet -P tcp | grep LISTEN | awk '{print $1}' | sed 's/^.*\.//'`
# add others...
fi

date_sec=`date +%S`

findfree() {
	try0=$1
	try=$try0
	use0=""

	while [ $try -lt 6000 ]
	do
		if [ "X$inuse" = "X" ]; then
			break
		fi
		if echo "$inuse" | grep -w $try > /dev/null; then
			:
		else
			use0=$try
			break
		fi
		try=`expr $try + 1`
	done
	if [ "X$use0" = "X" ]; then
		use0=`expr $date_sec + $try0`
	fi

	echo $use0
}

use=`findfree 5930`

if [ $use -ge 5900 ]; then
	N=`expr $use - 5900`
else
	N=$use
fi

if echo "$0" | grep vncip > /dev/null; then
	VNCVIEWERCMD="$VNCIPCMD"
fi

if [ "X$use_ssh" = "X1" ]; then
	ssh_port="22"
	ssh_host="$host"
	vnc_host="localhost"
	ssh=${SSH:-"ssh -x"}
	if [ "X$proxy" != "X" ]; then
		ssh_port=`echo "$proxy" | awk -F: '{print $2}'`
		if [ "X$ssh_port" = "X" ]; then
			ssh_port="22"
		fi
		ssh_host=`echo "$proxy" | awk -F: '{print $1}'`
		vnc_host="$host"
	fi
	echo ""
	echo "Running ssh:"
	sz=`echo "$ssh_cmd" | wc -c`
	if [ "$sz" -gt 200 ]; then
		info="..."
	else
		info="$ssh_cmd"
	fi

	C=""
	if [ "X$SSL_VNCVIEWER_USE_C" != "X" ]; then
		C="-C"
	fi
	# the -t option actually speeds up typing response via VNC!!
	if [ "X$SSL_VNCVIEWER_SSH_ONLY" != "X" ]; then
		echo "$ssh -p $ssh_port -t $C $ssh_args $ssh_host \"$info\""
		echo ""
		$ssh -p $ssh_port -t $C $ssh_args $ssh_host "$ssh_cmd"
		exit $?
	elif [ "X$SSL_VNCVIEWER_NO_F" != "X" ]; then
		echo "$ssh -p $ssh_port -t $C -L ${use}:${vnc_host}:${port} $ssh_args $ssh_host \"$info\""
		echo ""
		$ssh -p $ssh_port -t $C -L ${use}:${vnc_host}:${port} $ssh_args $ssh_host "$ssh_cmd"
	else
		echo "$ssh -f -p $ssh_port -t $C -L ${use}:${vnc_host}:${port} $ssh_args $ssh_host \"$info\""
		echo ""
		$ssh -f -p $ssh_port -t $C -L ${use}:${vnc_host}:${port} $ssh_args $ssh_host "$ssh_cmd"
	fi
	if [ "$?" != "0" ]; then
		echo ""
		echo "ssh to $ssh_host failed."
		exit 1
	fi
	echo ""
	if [ "X$ssh_cmd" = "Xsleep $ssh_sleep" ] ; then
		sleep 1
	else
		# let any command get started a bit.
		sleep 5
	fi
	echo ""
	#reset
	stty sane
	if [ "X$use_sshssl" = "X" ]; then
		echo "Running viewer:"
		echo $VNCVIEWERCMD "$@" localhost:$N
		echo ""
		$VNCVIEWERCMD "$@" localhost:$N

		exit $?
	else
		use2=`findfree 5960`
		host0=$host
		port0=$port
		host=localhost
		port=$use
		use=$use2
		N=`expr $use - 5900`
		proxy=""
	fi
fi

# create the stunnel config file:
if [ "X$verify" != "X" ]; then
	if [ -d $verify ]; then
		verify="CApath = $verify"
	else
		verify="CAfile = $verify"
	fi
	verify="$verify
verify = 2"
fi
if [ "X$mycert" != "X" ]; then
	cert="cert = $mycert"
fi

mytmp() {
	tf=$1
	rm -rf "$tf" || exit 1
	if [ -d "$tf" ]; then
		echo "tmp file $tf still exists as a directory."
		exit 1
	elif [ -L "$tf" ]; then
		echo "tmp file $tf still exists as a symlink."
		exit 1
	elif [ -f "$tf" ]; then
		echo "tmp file $tf still exists."
		exit 1
	fi
	touch "$tf" || exit 1
	chmod 600 "$tf" || exit 1
}

if echo "$RANDOM" | grep '[^0-9]' > /dev/null; then
	RANDOM=`date +%S`
fi

pcode() {
	tf=$1
	SSL_VNC_PROXY=$proxy; export SSL_VNC_PROXY
	SSL_VNC_DEST="$host:$port"; export SSL_VNC_DEST
	cod='#!/usr/bin/perl

# A hack to glue stunnel to a Web proxy for client connections.

use IO::Socket::INET;

my ($first, $second) = split(/,/, $ENV{SSL_VNC_PROXY});
my ($proxy_host, $proxy_port) = split(/:/, $first);
my $connect = $ENV{SSL_VNC_DEST};

print STDERR "\nperl script for web proxing:\n";
print STDERR "proxy_host:       $proxy_host\n";
print STDERR "proxy_port:       $proxy_port\n";
print STDERR "proxy_connect:    $connect\n";

my $sock = IO::Socket::INET->new(
	PeerAddr => $proxy_host,
	PeerPort => $proxy_port,
	Proto => "tcp");

if (! $sock) {
	unlink($0);
	die "perl proxy: $!\n";
}

my $con = "";
if ($second ne "") {
	$con = "CONNECT $second HTTP/1.1\r\n";
	$con   .= "Host: $second\r\n\r\n";
} else {
	$con = "CONNECT $connect HTTP/1.1\r\n";
	$con   .= "Host: $connect\r\n\r\n";
}

print STDERR "proxy_request1:\n$con";
print $sock $con;

unlink($0);

my $rep = "";
while ($rep !~ /\r\n\r\n/) {
	my $c = getc($sock);
	print STDERR $c;
	$rep .= $c;
}
if ($rep !~ m,HTTP/.* 200,) {
	die "proxy error: $rep\n";
}

if ($second ne "") {
	$con = "CONNECT $connect HTTP/1.1\r\n";
	$con   .= "Host: $connect\r\n\r\n";
	print STDERR "proxy_request2:\n$con";

	print $sock $con;

	$rep = "";
	while ($rep !~ /\r\n\r\n/) {
		my $c = getc($sock);
		print STDERR $c;
		$rep .= $c;
	}
	if ($rep !~ m,HTTP/.* 200,) {
		die "proxy error: $rep\n";
	}
}

if (fork) {
	print STDERR "parent\[$$]  STDIN -> socket\n\n";
	xfer(STDIN, $sock);
} else {
	print STDERR "child \[$$]  socket -> STDOUT\n\n";
	xfer($sock, STDOUT);
}
exit;

sub xfer {
	my($in, $out) = @_;
	$RIN = $WIN = $EIN = "";
	$ROUT = "";
	vec($RIN, fileno($in), 1) = 1;
	vec($WIN, fileno($in), 1) = 1;
	$EIN = $RIN | $WIN;

	while (1) {
		my $nf = 0;
		while (! $nf) {
			$nf = select($ROUT=$RIN, undef, undef, undef);
		}
		my $len = sysread($in, $buf, 8192);
		if (! defined($len)) {
			next if $! =~ /^Interrupted/;
			print STDERR "perl proxy\[$$]: $!\n";
			last;
		} elsif ($len == 0) {
			print STDERR "perl proxy\[$$]: Input is EOF.\n";
			last;
		}
		my $offset = 0;
		my $quit = 0;
		while ($len) {
			my $written = syswrite($out, $buf, $len, $offset);
			if (! defined $written) {
				print STDERR "perl proxy\[$$]: Output is EOF. $!\n";
				$quit = 1;
				last;
			}
			$len -= $written;
			$offset += $written;
		}
		last if $quit;
	}
	close($in);
	close($out);
}
'
	echo "$cod" > $tf
	chmod 700 $tf
}

ptmp=""
if [ "X$proxy" != "X" ]; then
	ptmp="/tmp/ssl_vncviewer${RANDOM}.$$.pl"
	mytmp "$ptmp"
	pcode "$ptmp"
	connect="exec = $ptmp"
else
	connect="connect = $host:$port"
fi


##debug = 7
tmp=/tmp/ssl_vncviewer${RANDOM}.$$
mytmp "$tmp"

cat > "$tmp" <<END
foreground = yes
pid =
client = yes
debug = 6
$STUNNEL_EXTRA_OPTS
$verify
$cert

[vnc_stunnel]
accept = localhost:$use
$connect
END

echo ""
echo "Using this stunnel configuration:"
echo ""
cat "$tmp" | uniq
echo ""
sleep 1

echo ""
echo "Running: stunnel"
echo "$STUNNEL $tmp"
$STUNNEL "$tmp" < /dev/tty > /dev/tty &
pid=$!
echo ""

# pause here to let the user supply a possible passphrase for the
# mycert key:
if [ "X$mycert" != "X" ]; then
	sleep 4
fi
sleep 2
rm -f "$tmp"

echo ""
echo "Running viewer:"
echo $VNCVIEWERCMD "$@" localhost:$N
echo ""
$VNCVIEWERCMD "$@" localhost:$N

kill $pid
sleep 1