Rename a number of old tq methods that are no longer tq specific

5 files changed, 52 insertions, 52 deletions

diff --git a/src/common/port/parallel.cpp b/src/common/port/parallel.cpp
index daa0c6a..3d92ae0 100644
--- a/src/common/port/parallel.cpp
+++ b/src/common/port/parallel.cpp
@@ -59,12 +59,12 @@ TQStringList Port::Parallel::deviceList()
   TQStringList list;
 #if defined(HAVE_PPDEV)
   // standard parport in user space
-  for(int i = 0; i<8; ++i) list.append(TQString("/dev/parport%1").tqarg(i));
+  for(int i = 0; i<8; ++i) list.append(TQString("/dev/parport%1").arg(i));
   // new devfs parport flavour
-  for(int i = 0; i<8; ++i) list.append(TQString("/dev/parports/%1").tqarg(i));
+  for(int i = 0; i<8; ++i) list.append(TQString("/dev/parports/%1").arg(i));
 #elif defined(HAVE_PPBUS)
   // FreeBSD
-  for(int i = 0; i<8; ++i) list.append(TQString("/dev/ppi%1").tqarg(i));
+  for(int i = 0; i<8; ++i) list.append(TQString("/dev/ppi%1").arg(i));
 #endif
   return list;
 }
@@ -100,12 +100,12 @@ const Port::Parallel::PPinData Port::Parallel::PIN_DATA[Nb_Pins] = {
   { Data,    0x20, Out, "D5"     }, // data 5
   { Data,    0x40, Out, "D6"     }, // data 6
   { Data,    0x80, Out, "D7"     }, // data 7
-  { tqStatus,  0x40, In,  "/ACK"   }, // !ack
-  { tqStatus,  0x80, In,  "BUSY"   }, // busy
-  { tqStatus,  0x20, In,  "PAPER"  }, // pout
-  { tqStatus,  0x10, In,  "SELin"  }, // select
+  { Status,  0x40, In,  "/ACK"   }, // !ack
+  { Status,  0x80, In,  "BUSY"   }, // busy
+  { Status,  0x20, In,  "PAPER"  }, // pout
+  { Status,  0x10, In,  "SELin"  }, // select
   { Control, 0x02, Out, "LF"     }, // !feed
-  { tqStatus,  0x08, In,  "/ERROR" }, // !error
+  { Status,  0x08, In,  "/ERROR" }, // !error
   { Control, 0x04, Out, "PRIME"  }, // !init
   { Control, 0x08, Out, "SELout" }, // !si
   { Nb_RequestTypes, 0x00, NoIO, "GND" }, // GND
@@ -166,17 +166,17 @@ bool Port::Parallel::internalOpen()
 #if defined(HAVE_PPDEV)
   _fd = ::open(_device.latin1(), O_RDWR);
   if ( _fd<0 ) {
-    setSystemError(i18n("Could not open device \"%1\"").tqarg(_device));
+    setSystemError(i18n("Could not open device \"%1\"").arg(_device));
     return false;
   }
   if ( ioctl(_fd, PPCLAIM)<0 ) {
-    setSystemError(i18n("Could not claim device \"%1\": check it is read/write enabled").tqarg(_device));
+    setSystemError(i18n("Could not claim device \"%1\": check it is read/write enabled").arg(_device));
     return false;
   }
 #elif defined(HAVE_PPBUS)
   _fd = ::open(_device.latin1(), O_RDWR);
   if ( _fd<0 ) {
-    setSystemError(i18n("Could not open device \"%1\"").tqarg(_device));
+    setSystemError(i18n("Could not open device \"%1\"").arg(_device));
     return false;
   }
 #endif
@@ -208,7 +208,7 @@ bool Port::Parallel::setPinOn(uint pin, bool on, LogicType type)
   int request = REQUEST_DATA[rtype].write;
   Q_ASSERT( request!=0 );
   if ( ioctl(_fd, request, &c)<0 ) {
-    setSystemError(i18n("Error setting pin %1 to %2").tqarg(PIN_DATA[pin].label).tqarg(on));
+    setSystemError(i18n("Error setting pin %1 to %2").arg(PIN_DATA[pin].label).arg(on));
     return false;
   }
   _images[rtype] = c;
@@ -228,7 +228,7 @@ bool Port::Parallel::readPin(uint pin, LogicType type, bool &value)
   Q_ASSERT( request!=0 );
   uchar c = 0;
   if ( ioctl(_fd, request, &c)<0 ) {
-    setSystemError(i18n("Error reading bit on pin %1").tqarg(PIN_DATA[pin].label));
+    setSystemError(i18n("Error reading bit on pin %1").arg(PIN_DATA[pin].label));
     return false;
   }
   _images[rtype] = c;
@@ -240,7 +240,7 @@ bool Port::Parallel::readPin(uint pin, LogicType type, bool &value)
 void Port::Parallel::setSystemError(const TQString &message)
 {
 #if defined(HAVE_PPDEV) || defined(HAVE_PPBUS)
-  log(Log::LineType::Error, message + TQString(" (errno=%1).").tqarg(strerror(errno)));
+  log(Log::LineType::Error, message + TQString(" (errno=%1).").arg(strerror(errno)));
 #else
   Q_UNUSED(message);
 #endif
diff --git a/src/common/port/parallel.h b/src/common/port/parallel.h
index 08741e1..d25529d 100644
--- a/src/common/port/parallel.h
+++ b/src/common/port/parallel.h
@@ -33,7 +33,7 @@ public:
   enum Pin { DS = 0, D0, D1, D2, D3, D4, D5, D6, D7, ACK, BUSY, PAPER, SELin,
              LF, ERROR, PRIME, SELout, P18, P19, P20, P21, P22, P23, P24, P25,
              Nb_Pins };
-  enum RequestType { Control = 0, tqStatus, Data, Nb_RequestTypes };
+  enum RequestType { Control = 0, Status, Data, Nb_RequestTypes };
   struct PPinData {
     RequestType rType;
     uchar       mask;
diff --git a/src/common/port/port_base.cpp b/src/common/port/port_base.cpp
index 0112a1b..63e820e 100644
--- a/src/common/port/port_base.cpp
+++ b/src/common/port/port_base.cpp
@@ -28,7 +28,7 @@ void Port::Base::close()
 
 bool Port::Base::send(const char *data, uint size, uint timeout)
 {
-  log(Log::DebugLevel::LowLevel, TQString("Sending: \"%1\"").tqarg(toPrintable(data, size, PrintAlphaNum)));
+  log(Log::DebugLevel::LowLevel, TQString("Sending: \"%1\"").arg(toPrintable(data, size, PrintAlphaNum)));
   return internalSend(data, size, timeout);
 }
 
@@ -45,14 +45,14 @@ bool Port::Base::receive(uint size, TQMemArray<uchar> &a, uint timeout)
 {
   a.resize(size);
   bool ok = internalReceive(size, (char *)a.data(), timeout);
-  if (ok) log(Log::DebugLevel::LowLevel, TQString("Received: \"%1\"").tqarg(toPrintable(a, PrintAlphaNum)));
+  if (ok) log(Log::DebugLevel::LowLevel, TQString("Received: \"%1\"").arg(toPrintable(a, PrintAlphaNum)));
   return ok;
 }
 
 bool Port::Base::receiveChar(char &c, uint timeout)
 {
   if ( !internalReceive(1, &c, timeout) ) return false;
-  log(Log::DebugLevel::LowLevel, TQString("Received: \"%1\"").tqarg(toPrintable(c, PrintAlphaNum)));
+  log(Log::DebugLevel::LowLevel, TQString("Received: \"%1\"").arg(toPrintable(c, PrintAlphaNum)));
   return true;
 }
 
diff --git a/src/common/port/serial.cpp b/src/common/port/serial.cpp
index 2db84b9..977f31c 100644
--- a/src/common/port/serial.cpp
+++ b/src/common/port/serial.cpp
@@ -73,21 +73,21 @@ TQStringList Port::Serial::deviceList()
   TQStringList list;
 #if defined(Q_OS_UNIX)
   // standard serport in user space
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyS%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyS%1").arg(i));
   // new devfs serport flavour
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/tts/%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/tts/%1").arg(i));
   // standard USB serport in user space
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyUSB%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyUSB%1").arg(i));
   // new devfs USB serport flavour
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/usb/tts/%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/usb/tts/%1").arg(i));
   // FreeBSD
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyd%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/ttyd%1").arg(i));
   // Slackware 11 devfs USB Serial port support.
-  for (uint i=0; i<8; i++) list.append(TQString("/dev/tts/USB%1").tqarg(i));
+  for (uint i=0; i<8; i++) list.append(TQString("/dev/tts/USB%1").arg(i));
   // MacOSX devfs USB Serial port support.
   list.append("/dev/tty.usbserial");
 #elif defined(Q_OS_WIN)
-  for (uint i=1; i<10; i++) list.append(TQString("COM%1").tqarg(i));
+  for (uint i=1; i<10; i++) list.append(TQString("COM%1").arg(i));
 #endif
   return list;
 }
@@ -187,7 +187,7 @@ bool Port::Serial::internalOpen()
 {
   _fd = openHandle(_device, In | Out);
   if ( _fd==INVALID_HANDLE ) {
-    setSystemError(i18n("Could not open device \"%1\" read-write").tqarg(_device));
+    setSystemError(i18n("Could not open device \"%1\" read-write").arg(_device));
     return false;
   }
   if ( !getParameters(_oldParameters) ) return false; // save configuration
@@ -232,7 +232,7 @@ bool Port::Serial::internalSend(const char *data, uint size, uint timeout)
     if ( res>0 ) todo -= res;
     else {
       if ( uint(time.elapsed())>timeout ) {
-        log(Log::LineType::Error, i18n("Timeout sending data (%1/%2 bytes sent).").tqarg(size-todo).tqarg(size));
+        log(Log::LineType::Error, i18n("Timeout sending data (%1/%2 bytes sent).").arg(size-todo).arg(size));
         return false;
       }
       msleep(1);
@@ -277,7 +277,7 @@ bool Port::Serial::internalReceive(uint size, char *data, uint timeout)
     if ( res>0 ) todo -= res;
     else {
       if ( uint(time.elapsed())>timeout ) {
-        log(Log::LineType::Error, i18n("Timeout receiving data (%1/%2 bytes received).").tqarg(size-todo).tqarg(size));
+        log(Log::LineType::Error, i18n("Timeout receiving data (%1/%2 bytes received).").arg(size-todo).arg(size));
         return false;
       }
       msleep(1);
@@ -303,7 +303,7 @@ bool Port::Serial::drain(uint timeout)
     if ( nb==0 ) break;
     if ( uint(time.elapsed())>timeout ) {
       _fd = INVALID_HANDLE; // otherwise close blocks...
-      log(Log::LineType::Error, i18n("Timeout sending data (%1 bytes left).").tqarg(nb));
+      log(Log::LineType::Error, i18n("Timeout sending data (%1 bytes left).").arg(nb));
       return false;
     }
   }
@@ -364,7 +364,7 @@ bool Port::Serial::setPinOn(uint pin, bool on, LogicType type)
   Q_ASSERT( pin<Nb_Pins );
   Q_ASSERT( PIN_DATA[pin].dir==Out );
   if ( !internalSetPinOn(Pin(pin), on) ) {
-    setSystemError(i18n("Error setting bit %1 of serial port to %2").tqarg(PIN_DATA[pin].label).tqarg(on));
+    setSystemError(i18n("Error setting bit %1 of serial port to %2").arg(PIN_DATA[pin].label).arg(on));
     return false;
   }
   return true;
@@ -387,7 +387,7 @@ bool Port::Serial::internalReadPin(Pin pin, LogicType type, bool &value)
   return true;
 #elif defined(Q_OS_WIN)
   DWORD status;
-  if ( GetCommModemtqStatus(_fd, &status)==0 ) return false;
+  if ( GetCommModemStatus(_fd, &status)==0 ) return false;
   switch (pin) {
     case DCD: value = (status & MS_RLSD_ON); break;
     case DSR: value = (status & MS_DSR_ON); break;
@@ -406,7 +406,7 @@ bool Port::Serial::internalReadPin(Pin pin, LogicType type, bool &value)
   Q_ASSERT( pin<Nb_Pins );
   Q_ASSERT( PIN_DATA[pin].dir==In );
   if ( !internalReadPin(Pin(pin), type, value) ) {
-    setSystemError(i18n("Error reading serial pin %1").tqarg(PIN_DATA[pin].label));
+    setSystemError(i18n("Error reading serial pin %1").arg(PIN_DATA[pin].label));
     return false;
   }
   return true;
@@ -513,11 +513,11 @@ bool Port::Serial::setHardwareFlowControl(bool on)
 void Port::Serial::setSystemError(const TQString &message)
 {
 #if defined(Q_OS_UNIX)
-  log(Log::LineType::Error, message + TQString(" (errno=%1)").tqarg(strerror(errno)));
+  log(Log::LineType::Error, message + TQString(" (errno=%1)").arg(strerror(errno)));
 #elif defined(Q_OS_WIN)
   LPVOID lpMsgBuf;
   FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS, NULL, GetLastError(), MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), (LPTSTR)&lpMsgBuf, 0, NULL);
-  log(Log::LineType::Error, message + TQString(" (last error=%1 %2)").tqarg(GetLastError()).tqarg((const char *)(LPCTSTR)lpMsgBuf));
+  log(Log::LineType::Error, message + TQString(" (last error=%1 %2)").arg(GetLastError()).arg((const char *)(LPCTSTR)lpMsgBuf));
   LocalFree(lpMsgBuf);
 #endif
 }
diff --git a/src/common/port/usb_port.cpp b/src/common/port/usb_port.cpp
index 80e7de2..76fa5b0 100644
--- a/src/common/port/usb_port.cpp
+++ b/src/common/port/usb_port.cpp
@@ -38,7 +38,7 @@ void Port::USB::initialize()
 #ifdef HAVE_USB
   usb_init();
   VersionData vd = VersionData::fromString(LIBUSB_VERSION);
-  TQString s = TQString("libusb %1").tqarg(vd.pretty());
+  TQString s = TQString("libusb %1").arg(vd.pretty());
   if ( vd<VersionData(0, 1, 8) ) qWarning("%s: may be too old (you need at least version 0.1.8)", s.latin1());
 #endif
 }
@@ -132,7 +132,7 @@ TQStringList Port::USB::probedDeviceList()
     for (struct usb_device *dev=bus->devices; dev; dev=dev->next) {
       if ( dev->descriptor.idVendor==0 ) continue; // controller
       list.append(TQString("Vendor Id: %1 - Product Id: %2")
-                  .tqarg(toLabel(NumberBase::Hex, dev->descriptor.idVendor, 4)).tqarg(toLabel(NumberBase::Hex, dev->descriptor.idProduct, 4)));
+                  .arg(toLabel(NumberBase::Hex, dev->descriptor.idVendor, 4)).arg(toLabel(NumberBase::Hex, dev->descriptor.idProduct, 4)));
     }
   }
 #endif
@@ -179,7 +179,7 @@ Port::USB::~USB()
 void Port::USB::setSystemError(const TQString &message)
 {
 #ifdef HAVE_USB
-  log(Log::LineType::Error, message + TQString(" (err=%1).").tqarg(usb_strerror()));
+  log(Log::LineType::Error, message + TQString(" (err=%1).").arg(usb_strerror()));
 #else
   log(Log::LineType::Error, message);
 #endif
@@ -192,7 +192,7 @@ void Port::USB::tryToDetachDriver()
   log(Log::DebugLevel::Extra, "find if there is already an installed driver");
   char dname[256] = "";
   if ( usb_get_driver_np(_handle, _interface, dname, 255)<0 ) return;
-  log(Log::DebugLevel::Normal, TQString("  a driver \"%1\" is already installed...").tqarg(dname));
+  log(Log::DebugLevel::Normal, TQString("  a driver \"%1\" is already installed...").arg(dname));
 #  if defined(LIBUSB_HAS_DETACH_KERNEL_DRIVER_NP) && LIBUSB_HAS_DETACH_KERNEL_DRIVER_NP
   usb_detach_kernel_driver_np(_handle, _interface);
   log(Log::DebugLevel::Normal, "  try to detach it...");
@@ -208,10 +208,10 @@ bool Port::USB::internalOpen()
   _device = findDevice(_vendorId, _productId);
   if ( _device==0 ) {
     log(Log::LineType::Error, i18n("Could not find USB device (vendor=%1 product=%2).")
-             .tqarg(toLabel(NumberBase::Hex, _vendorId, 4)).tqarg(toLabel(NumberBase::Hex, _productId, 4)));
+             .arg(toLabel(NumberBase::Hex, _vendorId, 4)).arg(toLabel(NumberBase::Hex, _productId, 4)));
     return false;
   }
-  log(Log::DebugLevel::Extra, TQString("found USB device as \"%1\" on bus \"%2\"").tqarg(_device->filename).tqarg(_device->bus->dirname));
+  log(Log::DebugLevel::Extra, TQString("found USB device as \"%1\" on bus \"%2\"").arg(_device->filename).arg(_device->bus->dirname));
   _handle = usb_open(_device);
   if ( _handle==0 ) {
     setSystemError(i18n("Error opening USB device."));
@@ -239,11 +239,11 @@ bool Port::USB::internalOpen()
     uint old = _config;
     i = 0;
     _config = _device->config[i].bConfigurationValue;
-    log(Log::LineType::Warning, i18n("Configuration %1 not present: using %2").tqarg(old).tqarg(_config));
+    log(Log::LineType::Warning, i18n("Configuration %1 not present: using %2").arg(old).arg(_config));
   }
   const usb_config_descriptor &configd = _device->config[i];
   if ( usb_set_configuration(_handle, _config)<0 ) {
-    setSystemError(i18n("Error setting USB configuration %1.").tqarg(_config));
+    setSystemError(i18n("Error setting USB configuration %1.").arg(_config));
     return false;
   }
   for (i=0; i<configd.bNumInterfaces; i++)
@@ -252,15 +252,15 @@ bool Port::USB::internalOpen()
     uint old = _interface;
     i = 0;
     _interface = configd.interface[i].altsetting[0].bInterfaceNumber;
-    log(Log::LineType::Warning, i18n("Interface %1 not present: using %2").tqarg(old).tqarg(_interface));
+    log(Log::LineType::Warning, i18n("Interface %1 not present: using %2").arg(old).arg(_interface));
   }
   _private->_interface = &(configd.interface[i].altsetting[0]);
   if ( usb_claim_interface(_handle, _interface)<0 ) {
-    setSystemError(i18n("Could not claim USB interface %1").tqarg(_interface));
+    setSystemError(i18n("Could not claim USB interface %1").arg(_interface));
     return false;
   }
-  log(Log::DebugLevel::Max, TQString("alternate setting is %1").tqarg(_private->_interface->bAlternateSetting));
-  log(Log::DebugLevel::Max, TQString("USB bcdDevice: %1").tqarg(toHexLabel(_device->descriptor.bcdDevice, 4)));
+  log(Log::DebugLevel::Max, TQString("alternate setting is %1").arg(_private->_interface->bAlternateSetting));
+  log(Log::DebugLevel::Max, TQString("USB bcdDevice: %1").arg(toHexLabel(_device->descriptor.bcdDevice, 4)));
   return true;
 #else
   log(Log::LineType::Error, i18n("USB support disabled"));
@@ -343,7 +343,7 @@ bool Port::USB::write(uint ep, const char *data, uint size)
   IODir dir = endpointDir(ep);
   EndpointMode mode = endpointMode(ep);
   log(Log::DebugLevel::LowLevel, TQString("write to endpoint %1 (%2 - %3) %4 chars: \"%5\"")
-                          .tqarg(toHexLabel(ep, 2)).tqarg(ENDPOINT_MODE_NAMES[mode]).tqarg(IO_DIR_NAMES[dir]).tqarg(size).tqarg(toPrintable(data, size, PrintEscapeAll)));
+                          .arg(toHexLabel(ep, 2)).arg(ENDPOINT_MODE_NAMES[mode]).arg(IO_DIR_NAMES[dir]).arg(size).arg(toPrintable(data, size, PrintEscapeAll)));
   Q_ASSERT( dir==Out );
   TQTime time;
   time.start();
@@ -356,8 +356,8 @@ bool Port::USB::write(uint ep, const char *data, uint size)
     //qDebug("res: %i", res);
     if ( res==todo ) break;
     if ( uint(time.elapsed())>3000 ) { // 3 s
-      if ( res<0 ) setSystemError(i18n("Error sending data (ep=%1 res=%2)").tqarg(toHexLabel(ep, 2)).tqarg(res));
-      else log(Log::LineType::Error, i18n("Timeout: only some data sent (%1/%2 bytes).").tqarg(size-todo).tqarg(size));
+      if ( res<0 ) setSystemError(i18n("Error sending data (ep=%1 res=%2)").arg(toHexLabel(ep, 2)).arg(res));
+      else log(Log::LineType::Error, i18n("Timeout: only some data sent (%1/%2 bytes).").arg(size-todo).arg(size));
       return false;
     }
     if ( res==0 ) log(Log::DebugLevel::Normal, i18n("Nothing sent: retrying..."));
@@ -377,7 +377,7 @@ bool Port::USB::read(uint ep, char *data, uint size, bool *poll)
   IODir dir = endpointDir(ep);
   EndpointMode mode = endpointMode(ep);
   log(Log::DebugLevel::LowLevel, TQString("read from endpoint %1 (%2 - %3) %4 chars")
-                          .tqarg(toHexLabel(ep, 2)).tqarg(ENDPOINT_MODE_NAMES[mode]).tqarg(IO_DIR_NAMES[dir]).tqarg(size));
+                          .arg(toHexLabel(ep, 2)).arg(ENDPOINT_MODE_NAMES[mode]).arg(IO_DIR_NAMES[dir]).arg(size));
   Q_ASSERT( dir==In );
   TQTime time;
   time.start();
@@ -390,8 +390,8 @@ bool Port::USB::read(uint ep, char *data, uint size, bool *poll)
     //qDebug("res: %i", res);
     if ( res==todo ) break;
     if ( uint(time.elapsed())>3000 ) { // 3 s: seems to help icd2 in some case (?)
-      if ( res<0 ) setSystemError(i18n("Error receiving data (ep=%1 res=%2)").tqarg(toHexLabel(ep, 2)).tqarg(res));
-      else log(Log::LineType::Error, i18n("Timeout: only some data received (%1/%2 bytes).").tqarg(size-todo).tqarg(size));
+      if ( res<0 ) setSystemError(i18n("Error receiving data (ep=%1 res=%2)").arg(toHexLabel(ep, 2)).arg(res));
+      else log(Log::LineType::Error, i18n("Timeout: only some data received (%1/%2 bytes).").arg(size-todo).arg(size));
       return false;
     }
     if ( res==0 ) {