Initial TQt conversion

19 files changed, 973 insertions, 973 deletions

diff --git a/pyuic3/LICENSE.GPL b/pyuic3/LICENSE.GPL
index c7aea18..fc80518 100644
--- a/pyuic3/LICENSE.GPL
+++ b/pyuic3/LICENSE.GPL
@@ -109,9 +109,9 @@ above, provided that you also meet all of these conditions:
     these conditions, and telling the user how to view a copy of this
     License.  (Exception: if the Program itself is interactive but
     does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
+    the Program is not retquired to print an announcement.)
 
-These requirements apply to the modified work as a whole.  If
+These retquirements apply to the modified work as a whole.  If
 identifiable sections of that work are not derived from the Program,
 and can be reasonably considered independent and separate works in
 themselves, then this License, and its terms, do not apply to those
@@ -177,7 +177,7 @@ However, parties who have received copies, or rights, from you under
 this License will not have their licenses terminated so long as such
 parties remain in full compliance.
 
-  5. You are not required to accept this License, since you have not
+  5. You are not retquired to accept this License, since you have not
 signed it.  However, nothing else grants you permission to modify or
 distribute the Program or its derivative works.  These actions are
 prohibited by law if you do not accept this License.  Therefore, by
@@ -263,14 +263,14 @@ OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
 PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
 OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+TO THE TQUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
 PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
 REPAIR OR CORRECTION.
 
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+  12. IN NO EVENT UNLESS RETQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
 WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
 REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSETQUENTIAL DAMAGES ARISING
 OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
 TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
 YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
diff --git a/pyuic3/domtool.cpp b/pyuic3/domtool.cpp
index b3514a0..37f7f0f 100644
--- a/pyuic3/domtool.cpp
+++ b/pyuic3/domtool.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -45,9 +45,9 @@
 
   \sa hasProperty()
 */
-QVariant DomTool::readProperty( const QDomElement& e, const QString& name, const QVariant& defValue, QString& comment )
+TQVariant DomTool::readProperty( const TQDomElement& e, const TQString& name, const TQVariant& defValue, TQString& comment )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "property" ) {
 	    if ( n.attribute( "name" ) != name )
@@ -62,9 +62,9 @@ QVariant DomTool::readProperty( const QDomElement& e, const QString& name, const
 /*!
   \overload
  */
-QVariant DomTool::readProperty( const QDomElement& e, const QString& name, const QVariant& defValue )
+TQVariant DomTool::readProperty( const TQDomElement& e, const TQString& name, const TQVariant& defValue )
 {
-    QString comment;
+    TQString comment;
     return readProperty( e, name, defValue, comment );
 }
 
@@ -73,9 +73,9 @@ QVariant DomTool::readProperty( const QDomElement& e, const QString& name, const
 
   \sa readProperty()
  */
-bool DomTool::hasProperty( const QDomElement& e, const QString& name )
+bool DomTool::hasProperty( const TQDomElement& e, const TQString& name )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "property" ) {
 	    if ( n.attribute( "name" ) != name )
@@ -86,13 +86,13 @@ bool DomTool::hasProperty( const QDomElement& e, const QString& name )
     return FALSE;
 }
 
-QStringList DomTool::propertiesOfType( const QDomElement& e, const QString& type )
+TQStringList DomTool::propertiesOfType( const TQDomElement& e, const TQString& type )
 {
-    QStringList result;
-    QDomElement n;
+    TQStringList result;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "property" ) {
-	    QDomElement n2 = n.firstChild().toElement();
+	    TQDomElement n2 = n.firstChild().toElement();
 	    if ( n2.tagName() == type )
 		result += n.attribute( "name" );
 	}
@@ -101,20 +101,20 @@ QStringList DomTool::propertiesOfType( const QDomElement& e, const QString& type
 }
 
 
-QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defValue )
+TQVariant DomTool::elementToVariant( const TQDomElement& e, const TQVariant& defValue )
 {
-    QString dummy;
+    TQString dummy;
     return elementToVariant( e, defValue, dummy );
 }
 
 /*!
   Interprets element \a e as variant and returns the result of the interpretation.
  */
-QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defValue, QString &comment )
+TQVariant DomTool::elementToVariant( const TQDomElement& e, const TQVariant& defValue, TQString &comment )
 {
-    QVariant v;
+    TQVariant v;
     if ( e.tagName() == "rect" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int x = 0, y = 0, w = 0, h = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "x" )
@@ -127,9 +127,9 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		h = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QRect( x, y, w, h ) );
+	v = TQVariant( TQRect( x, y, w, h ) );
     } else if ( e.tagName() == "point" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int x = 0, y = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "x" )
@@ -138,9 +138,9 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		y = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QPoint( x, y ) );
+	v = TQVariant( TQPoint( x, y ) );
     } else if ( e.tagName() == "size" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int w = 0, h = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "width" )
@@ -149,12 +149,12 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		h = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QSize( w, h ) );
+	v = TQVariant( TQSize( w, h ) );
     } else if ( e.tagName() == "color" ) {
-	v = QVariant( readColor( e ) );
+	v = TQVariant( readColor( e ) );
     } else if ( e.tagName() == "font" ) {
-	QDomElement n3 = e.firstChild().toElement();
-	QFont f( defValue.toFont()  );
+	TQDomElement n3 = e.firstChild().toElement();
+	TQFont f( defValue.toFont()  );
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "family" )
 		f.setFamily( n3.firstChild().toText().data() );
@@ -170,58 +170,58 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		f.setStrikeOut( n3.firstChild().toText().data().toInt() );
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( f );
+	v = TQVariant( f );
     } else if ( e.tagName() == "string" ) {
-	v = QVariant( e.firstChild().toText().data() );
-	QDomElement n = e;
+	v = TQVariant( e.firstChild().toText().data() );
+	TQDomElement n = e;
 	n = n.nextSibling().toElement();
 	if ( n.tagName() == "comment" )
 	    comment = n.firstChild().toText().data();
     } else if ( e.tagName() == "cstring" ) {
-	v = QVariant( QCString( e.firstChild().toText().data() ) );
+	v = TQVariant( TQCString( e.firstChild().toText().data() ) );
     } else if ( e.tagName() == "number" ) {
 	bool ok = TRUE;
-	v = QVariant( e.firstChild().toText().data().toInt( &ok ) );
+	v = TQVariant( e.firstChild().toText().data().toInt( &ok ) );
 	if ( !ok )
-	    v = QVariant( e.firstChild().toText().data().toDouble() );
+	    v = TQVariant( e.firstChild().toText().data().toDouble() );
     } else if ( e.tagName() == "bool" ) {
-	QString t = e.firstChild().toText().data();
-	v = QVariant( t == "true" || t == "1", 0 );
+	TQString t = e.firstChild().toText().data();
+	v = TQVariant( t == "true" || t == "1", 0 );
     } else if ( e.tagName() == "pixmap" ) {
-	v = QVariant( e.firstChild().toText().data() );
+	v = TQVariant( e.firstChild().toText().data() );
     } else if ( e.tagName() == "iconset" ) {
-	v = QVariant( e.firstChild().toText().data() );
+	v = TQVariant( e.firstChild().toText().data() );
     } else if ( e.tagName() == "image" ) {
-	v = QVariant( e.firstChild().toText().data() );
+	v = TQVariant( e.firstChild().toText().data() );
     } else if ( e.tagName() == "enum" ) {
-	v = QVariant( e.firstChild().toText().data() );
+	v = TQVariant( e.firstChild().toText().data() );
     } else if ( e.tagName() == "set" ) {
-	v = QVariant( e.firstChild().toText().data() );
+	v = TQVariant( e.firstChild().toText().data() );
     } else if ( e.tagName() == "sizepolicy" ) {
-	QDomElement n3 = e.firstChild().toElement();
-	QSizePolicy sp;
+	TQDomElement n3 = e.firstChild().toElement();
+	TQSizePolicy sp;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "hsizetype" )
-		sp.setHorData( (QSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
+		sp.setHorData( (TQSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "vsizetype" )
-		sp.setVerData( (QSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
+		sp.setVerData( (TQSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "horstretch" )
 		sp.setHorStretch( n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "verstretch" )
 		sp.setVerStretch( n3.firstChild().toText().data().toInt() );
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( sp );
+	v = TQVariant( sp );
     } else if ( e.tagName() == "cursor" ) {
-	v = QVariant( QCursor( e.firstChild().toText().data().toInt() ) );
+	v = TQVariant( TQCursor( e.firstChild().toText().data().toInt() ) );
     } else if ( e.tagName() == "stringlist" ) {
-	QStringList lst;
-	QDomElement n;
+	TQStringList lst;
+	TQDomElement n;
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() )
 	    lst << n.firstChild().toText().data();
-	v = QVariant( lst );
+	v = TQVariant( lst );
     } else if ( e.tagName() == "date" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int y, m, d;
 	y = m = d = 0;
 	while ( !n3.isNull() ) {
@@ -233,9 +233,9 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		d = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QDate( y, m, d ) );
+	v = TQVariant( TQDate( y, m, d ) );
     } else if ( e.tagName() == "time" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int h, m, s;
 	h = m = s = 0;
 	while ( !n3.isNull() ) {
@@ -247,9 +247,9 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		s = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QTime( h, m, s ) );
+	v = TQVariant( TQTime( h, m, s ) );
     } else if ( e.tagName() == "datetime" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int h, mi, s, y, mo, d ;
 	h = mi = s = y = mo = d = 0;
 	while ( !n3.isNull() ) {
@@ -267,7 +267,7 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 		d = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = QVariant( QDateTime( QDate( y, mo, d ), QTime( h, mi, s ) ) );
+	v = TQVariant( TQDateTime( TQDate( y, mo, d ), TQTime( h, mi, s ) ) );
     }
     return v;
 }
@@ -276,9 +276,9 @@ QVariant DomTool::elementToVariant( const QDomElement& e, const QVariant& defVal
 /*!  Returns the color which is returned in the dom element \a e.
  */
 
-QColor DomTool::readColor( const QDomElement &e )
+TQColor DomTool::readColor( const TQDomElement &e )
 {
-    QDomElement n = e.firstChild().toElement();
+    TQDomElement n = e.firstChild().toElement();
     int r= 0, g = 0, b = 0;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "red" )
@@ -290,7 +290,7 @@ QColor DomTool::readColor( const QDomElement &e )
 	n = n.nextSibling().toElement();
     }
 
-    return QColor( r, g, b );
+    return TQColor( r, g, b );
 }
 
 /*!
@@ -300,9 +300,9 @@ QColor DomTool::readColor( const QDomElement &e )
 
   \sa hasAttribute()
  */
-QVariant DomTool::readAttribute( const QDomElement& e, const QString& name, const QVariant& defValue, QString& comment )
+TQVariant DomTool::readAttribute( const TQDomElement& e, const TQString& name, const TQVariant& defValue, TQString& comment )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "attribute" ) {
 	    if ( n.attribute( "name" ) != name )
@@ -316,9 +316,9 @@ QVariant DomTool::readAttribute( const QDomElement& e, const QString& name, cons
 /*!
   \overload
 */
-QVariant DomTool::readAttribute( const QDomElement& e, const QString& name, const QVariant& defValue )
+TQVariant DomTool::readAttribute( const TQDomElement& e, const TQString& name, const TQVariant& defValue )
 {
-    QString comment;
+    TQString comment;
     return readAttribute( e, name, defValue, comment );
 }
 
@@ -327,9 +327,9 @@ QVariant DomTool::readAttribute( const QDomElement& e, const QString& name, cons
 
   \sa readAttribute()
  */
-bool DomTool::hasAttribute( const QDomElement& e, const QString& name )
+bool DomTool::hasAttribute( const TQDomElement& e, const TQString& name )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "attribute" ) {
 	    if ( n.attribute( "name" ) != name )
@@ -340,19 +340,19 @@ bool DomTool::hasAttribute( const QDomElement& e, const QString& name )
     return FALSE;
 }
 
-static bool toBool( const QString& s )
+static bool toBool( const TQString& s )
 {
     return s == "true" || s.toInt() != 0;
 }
 
 /*!
-  Convert Qt 2.x format to Qt 3.0 format if necessary
+  Convert TQt 2.x format to TQt 3.0 format if necessary
 */
-void DomTool::fixDocument( QDomDocument& doc )
+void DomTool::fixDocument( TQDomDocument& doc )
 {
-    QDomElement e;
-    QDomNode n;
-    QDomNodeList nl;
+    TQDomElement e;
+    TQDomNode n;
+    TQDomNodeList nl;
     int i = 0;
 
     e = doc.firstChild().toElement();
@@ -368,8 +368,8 @@ void DomTool::fixDocument( QDomDocument& doc )
     // in 3.0, we need to fix a spelling error
     if ( e.hasAttribute("version") && e.attribute("version").toDouble() == 3.0 ) {
 	for ( i = 0; i <  (int) nl.length(); i++ ) {
-	    QDomElement el = nl.item(i).toElement();
-	    QString s = el.attribute( "name" );
+	    TQDomElement el = nl.item(i).toElement();
+	    TQString s = el.attribute( "name" );
 	    if ( s == "resizeable" ) {
 		el.removeAttribute( "name" );
 		el.setAttribute( "name", "resizable" );
@@ -385,8 +385,8 @@ void DomTool::fixDocument( QDomDocument& doc )
     e.setAttribute("stdsetdef", 1 );
     for ( i = 0; i <  (int) nl.length(); i++ ) {
 	e = nl.item(i).toElement();
-	QString name;
-	QDomElement n2 = e.firstChild().toElement();
+	TQString name;
+	TQDomElement n2 = e.firstChild().toElement();
 	if ( n2.tagName() == "name" ) {
 	    name = n2.firstChild().toText().data();
 	    if ( name == "resizeable" )
@@ -410,8 +410,8 @@ void DomTool::fixDocument( QDomDocument& doc )
     nl = doc.elementsByTagName( "attribute" );
     for ( i = 0; i <  (int) nl.length(); i++ ) {
 	e = nl.item(i).toElement();
-	QString name;
-	QDomElement n2 = e.firstChild().toElement();
+	TQString name;
+	TQDomElement n2 = e.firstChild().toElement();
 	if ( n2.tagName() == "name" ) {
 	    name = n2.firstChild().toText().data();
 	    e.setAttribute( "name", name );
@@ -422,8 +422,8 @@ void DomTool::fixDocument( QDomDocument& doc )
     nl = doc.elementsByTagName( "image" );
     for ( i = 0; i <  (int) nl.length(); i++ ) {
 	e = nl.item(i).toElement();
-	QString name;
-	QDomElement n2 = e.firstChild().toElement();
+	TQString name;
+	TQDomElement n2 = e.firstChild().toElement();
 	if ( n2.tagName() == "name" ) {
 	    name = n2.firstChild().toText().data();
 	    e.setAttribute( "name", name );
@@ -434,8 +434,8 @@ void DomTool::fixDocument( QDomDocument& doc )
     nl = doc.elementsByTagName( "widget" );
     for ( i = 0; i <  (int) nl.length(); i++ ) {
 	e = nl.item(i).toElement();
-	QString name;
-	QDomElement n2 = e.firstChild().toElement();
+	TQString name;
+	TQDomElement n2 = e.firstChild().toElement();
 	if ( n2.tagName() == "class" ) {
 	    name = n2.firstChild().toText().data();
 	    e.setAttribute( "class", name );
diff --git a/pyuic3/domtool.h b/pyuic3/domtool.h
index 25b795d..c9647ed 100644
--- a/pyuic3/domtool.h
+++ b/pyuic3/domtool.h
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -24,23 +24,23 @@
 #include <qvariant.h>
 #include <qnamespace.h>
 
-class QDomElement;
-class QDomDocument;
+class TQDomElement;
+class TQDomDocument;
 
-class DomTool : public Qt
+class DomTool : public TQt
 {
 public:
-    static QVariant readProperty( const QDomElement& e, const QString& name, const QVariant& defValue );
-    static QVariant readProperty( const QDomElement& e, const QString& name, const QVariant& defValue, QString& comment );
-    static bool hasProperty( const QDomElement& e, const QString& name );
-    static QStringList propertiesOfType( const QDomElement& e, const QString& type );
-    static QVariant elementToVariant( const QDomElement& e, const QVariant& defValue );
-    static QVariant elementToVariant( const QDomElement& e, const QVariant& defValue, QString &comment );
-    static QVariant readAttribute( const QDomElement& e, const QString& name, const QVariant& defValue );
-    static QVariant readAttribute( const QDomElement& e, const QString& name, const QVariant& defValue, QString& comment );
-    static bool hasAttribute( const QDomElement& e, const QString& name );
-    static QColor readColor( const QDomElement &e );
-    static void fixDocument( QDomDocument& );
+    static TQVariant readProperty( const TQDomElement& e, const TQString& name, const TQVariant& defValue );
+    static TQVariant readProperty( const TQDomElement& e, const TQString& name, const TQVariant& defValue, TQString& comment );
+    static bool hasProperty( const TQDomElement& e, const TQString& name );
+    static TQStringList propertiesOfType( const TQDomElement& e, const TQString& type );
+    static TQVariant elementToVariant( const TQDomElement& e, const TQVariant& defValue );
+    static TQVariant elementToVariant( const TQDomElement& e, const TQVariant& defValue, TQString &comment );
+    static TQVariant readAttribute( const TQDomElement& e, const TQString& name, const TQVariant& defValue );
+    static TQVariant readAttribute( const TQDomElement& e, const TQString& name, const TQVariant& defValue, TQString& comment );
+    static bool hasAttribute( const TQDomElement& e, const TQString& name );
+    static TQColor readColor( const TQDomElement &e );
+    static void fixDocument( TQDomDocument& );
 };
 
 
diff --git a/pyuic3/embed.cpp b/pyuic3/embed.cpp
index 04f6494..824cca8 100644
--- a/pyuic3/embed.cpp
+++ b/pyuic3/embed.cpp
@@ -3,7 +3,7 @@
 ** Copyright (c) 2001 Phil Thompson <phil@river-bank.demon.co.uk>
 ** Copyright (c) 2002 Riverbank Computing Limited <info@riverbankcomputing.co.uk>
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -41,18 +41,18 @@ struct EmbedImage
     ~EmbedImage() { delete[] colorTable; }
     int width, height, depth;
     int numColors;
-    QRgb* colorTable;
-    QString name;
-    QString cname;
+    TQRgb* colorTable;
+    TQString name;
+    TQString cname;
     bool alpha;
 #ifndef QT_NO_IMAGE_COLLECTION_COMPRESSION
     ulong compressed;
 #endif
 };
 
-static QString convertToCIdentifier( const char *s )
+static TQString convertToCIdentifier( const char *s )
 {
-    QString r = s;
+    TQString r = s;
     int len = r.length();
     if ( len > 0 && !isalpha( (char)r[0].latin1() ) )
 	r[0] = '_';
@@ -64,16 +64,16 @@ static QString convertToCIdentifier( const char *s )
 }
 
 
-static ulong embedData( QTextStream& out, const uchar* input, int nbytes )
+static ulong embedData( TQTextStream& out, const uchar* input, int nbytes )
 {
 #ifndef QT_NO_IMAGE_COLLECTION_COMPRESSION
-    QByteArray bazip( qCompress( input, nbytes ) );
+    TQByteArray bazip( qCompress( input, nbytes ) );
     uint len = bazip.size();
 #else
     uint len = (uint)nbytes;
 #endif
     static const char hexdigits[] = "0123456789abcdef";
-    QString s;
+    TQString s;
     for ( uint i=0; i<len; i++ ) {
 	if ( (i%14) == 0 ) {
 	    if (i)
@@ -101,10 +101,10 @@ static ulong embedData( QTextStream& out, const uchar* input, int nbytes )
     return (ulong)len;
 }
 
-static void embedData( QTextStream& out, const QRgb* input, int n )
+static void embedData( TQTextStream& out, const TQRgb* input, int n )
 {
     out << hex;
-    const QRgb *v = input;
+    const TQRgb *v = input;
     for ( int i=0; i<n; i++ ) {
 	if ( (i%14) == 0  )
 	    out << "\n    ";
@@ -116,26 +116,26 @@ static void embedData( QTextStream& out, const QRgb* input, int n )
     out << dec; // back to decimal mode
 }
 
-void Uic::embed( QTextStream& out, const char* project, const QStringList& images )
+void Uic::embed( TQTextStream& out, const char* project, const TQStringList& images )
 {
 
-    QString cProject = convertToCIdentifier( project );
+    TQString cProject = convertToCIdentifier( project );
 
-    QStringList::ConstIterator it;
+    TQStringList::ConstIterator it;
     out << "# Image collection for project '" << project << "'.\n";
     out << "#\n";
     out << "# Generated from reading image files: \n";
     for ( it = images.begin(); it != images.end(); ++it )
 	out << "#      " << *it << "\n";
     out << "#\n";
-    out << "# Created: " << QDateTime::currentDateTime().toString() << "\n";
-    out << "#      by: The PyQt User Interface Compiler (pyuic) " << PYQT_VERSION << "\n";
+    out << "# Created: " << TQDateTime::currentDateTime().toString() << "\n";
+    out << "#      by: The PyTQt User Interface Compiler (pyuic) " << PYQT_VERSION << "\n";
     out << "#\n";
     out << "# WARNING! All changes made in this file will be lost!\n";
 
     out << "\n";
     out << "\n";
-    out << "from qt import QImage, QMimeSourceFactory";
+    out << "from qt import TQImage, TQMimeSourceFactory";
 #ifndef QT_NO_IMAGE_COLLECTION_COMPRESSION
     out << ", qUncompress";
 #endif
@@ -144,11 +144,11 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
     out << "\n";
 
 
-    QPtrList<EmbedImage> list_image;
+    TQPtrList<EmbedImage> list_image;
     list_image.setAutoDelete( TRUE );
     int image_count = 0;
     for ( it = images.begin(); it != images.end(); ++it ) {
-	QImage img;
+	TQImage img;
 	if ( !img.load( *it ) ) {
 	    fprintf( stderr, "pyuic: cannot load image file %s\n", (*it).latin1() );
 	    continue;
@@ -158,17 +158,17 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	e->height = img.height();
 	e->depth = img.depth();
 	e->numColors = img.numColors();
-	e->colorTable = new QRgb[e->numColors];
+	e->colorTable = new TQRgb[e->numColors];
 	e->alpha = img.hasAlphaBuffer();
-	memcpy(e->colorTable, img.colorTable(), e->numColors*sizeof(QRgb));
-	QFileInfo fi( *it );
+	memcpy(e->colorTable, img.colorTable(), e->numColors*sizeof(TQRgb));
+	TQFileInfo fi( *it );
 	e->name = fi.fileName();
-	e->cname = QString("image_%1").arg( image_count++);
+	e->cname = TQString("image_%1").arg( image_count++);
 	list_image.append( e );
 	out << "# " << *it << "\n";
-	QString s;
+	TQString s;
 	if ( e->depth == 1 )
-	    img = img.convertBitOrder(QImage::BigEndian);
+	    img = img.convertBitOrder(TQImage::BigEndian);
 	out << s.sprintf( "%s_data =",
 			  (const char *)e->cname );
 #ifndef QT_NO_IMAGE_COLLECTION_COMPRESSION
@@ -230,7 +230,7 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	// Keep the data object alive until we have a deep copy of the image.
 	out << indent << "data = qUncompress(data).data()\n";
 #endif
-	out << indent << "img = QImage(data,w,h,depth,colTab,nrCol,QImage.BigEndian).copy()\n";
+	out << indent << "img = TQImage(data,w,h,depth,colTab,nrCol,TQImage.BigEndian).copy()\n";
 	out << "\n";
 	out << indent << "if alpha:\n";
 	++indent;
@@ -241,21 +241,21 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	--indent;
 	--indent;
 	out << endl;
-	out << indent << "return QImage()\n";
+	out << indent << "return TQImage()\n";
 	--indent;
 	out << "\n";
 	out << "\n";
 
-	out << indent << "class MimeSourceFactory_" << cProject << "(QMimeSourceFactory):\n";
+	out << indent << "class MimeSourceFactory_" << cProject << "(TQMimeSourceFactory):\n";
 	++indent;
 	out << indent << "def __init__(self):\n";
 	++indent;
-	out << indent << "QMimeSourceFactory.__init__(self)\n";
+	out << indent << "TQMimeSourceFactory.__init__(self)\n";
 	out << "\n";
 	--indent;
 	out << indent << "def data(self,abs_name):\n";
 	++indent;
-	out << indent << "d = QMimeSourceFactory.data(self,abs_name)\n";
+	out << indent << "d = TQMimeSourceFactory.data(self,abs_name)\n";
 	out << indent << "if d or abs_name.isNull():\n";
 	++indent;
 	out << indent << "return d\n";
@@ -267,7 +267,7 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	out << indent << "self.setImage(abs_name,img)\n";
 	--indent;
 	out << "\n";
-	out << indent << "return QMimeSourceFactory.data(self,abs_name)\n";
+	out << indent << "return TQMimeSourceFactory.data(self,abs_name)\n";
 	--indent;
 	--indent;
 	out << "\n";
@@ -283,7 +283,7 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	out << indent << "if factory is None:\n";
 	++indent;
 	out << indent << "factory = MimeSourceFactory_" << cProject << "()\n";
-	out << indent << "QMimeSourceFactory.defaultFactory().addFactory(factory)\n";
+	out << indent << "TQMimeSourceFactory.defaultFactory().addFactory(factory)\n";
 	--indent;
 	--indent;
 	out << "\n";
@@ -295,7 +295,7 @@ void Uic::embed( QTextStream& out, const char* project, const QStringList& image
 	out << "\n";
 	out << indent << "if factory is not None:\n";
 	++indent;
-	out << indent << "QMimeSourceFactory.defaultFactory().removeFactory(factory)\n";
+	out << indent << "TQMimeSourceFactory.defaultFactory().removeFactory(factory)\n";
 	out << indent << "factory = None\n";
 	--indent;
 	--indent;
diff --git a/pyuic3/form.cpp b/pyuic3/form.cpp
index aedb4ac..31785ac 100644
--- a/pyuic3/form.cpp
+++ b/pyuic3/form.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -34,7 +34,7 @@
 #include <zlib.h>
 #endif
 
-static QByteArray unzipXPM( QString data, ulong& length )
+static TQByteArray unzipXPM( TQString data, ulong& length )
 {
 #if QT_VERSION >= 0x030100
     const int lengthOffset = 4;
@@ -61,7 +61,7 @@ static QByteArray unzipXPM( QString data, ulong& length )
     ba[1] = ( length & 0x00ff0000 ) >> 16;
     ba[2] = ( length & 0x0000ff00 ) >> 8;
     ba[3] = ( length & 0x000000ff );
-    QByteArray baunzip = qUncompress( ba, baSize );
+    TQByteArray baunzip = qUncompress( ba, baSize );
     delete[] ba;
     return baunzip;
 #else
@@ -94,7 +94,7 @@ static QByteArray unzipXPM( QString data, ulong& length )
     // crashes in some cases of slightly corrupt UIC files.
     if ( length <  data.length() * 5 )
 	length = data.length() * 5;
-    QByteArray baunzip( length );
+    TQByteArray baunzip( length );
     ::uncompress( (uchar*) baunzip.data(), &length, ba, data.length()/2 );
     delete[] ba;
     return baunzip;
@@ -108,27 +108,27 @@ static QByteArray unzipXPM( QString data, ulong& length )
 
   \sa createFormDecl(), createObjectImpl()
  */
-void Uic::createFormImpl( const QDomElement &e )
+void Uic::createFormImpl( const TQDomElement &e )
 {
-    QDomElement n;
-    QDomNodeList nl;
+    TQDomElement n;
+    TQDomNodeList nl;
     int i;
-    QString objClass = getClassName( e );
+    TQString objClass = getClassName( e );
     if ( objClass.isEmpty() )
 	return;
-    QString objName = getObjectName( e );
+    TQString objName = getObjectName( e );
 
-    // generate local and local includes required
-    QStringList globalIncludes;
-    QStringList::Iterator it;
-    QStringList sqlClasses;
-    QStringList axwidgets, databrowsers;
+    // generate local and local includes retquired
+    TQStringList globalIncludes;
+    TQStringList::Iterator it;
+    TQStringList sqlClasses;
+    TQStringList axwidgets, databrowsers;
 
-    QMap<QString, CustomInclude> customWidgetIncludes;
-    QMap<QString, QString> functionImpls;
+    TQMap<TQString, CustomInclude> customWidgetIncludes;
+    TQMap<TQString, TQString> functionImpls;
     // find additional slots and functions
-    QStringList extraSlots;
-    QStringList extraSlotTypes;
+    TQStringList extraSlots;
+    TQStringList extraSlotTypes;
     nl = e.parentNode().toElement().elementsByTagName( "slot" );
     for ( i = 0; i < (int) nl.length(); i++ ) {
 	n = nl.item(i).toElement();
@@ -137,7 +137,7 @@ void Uic::createFormImpl( const QDomElement &e )
 	    continue;
 	if ( n.attribute( "language", "C++" ) != "C++" )
 	    continue;
-	QString slotName = n.firstChild().toText().data().stripWhiteSpace();
+	TQString slotName = n.firstChild().toText().data().stripWhiteSpace();
 	if ( slotName.endsWith( ";" ) )
 	    slotName = slotName.left( slotName.length() - 1 );
 
@@ -147,9 +147,9 @@ void Uic::createFormImpl( const QDomElement &e )
 
     for ( n = e; !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "functions" ) { // compatibility
-	    for ( QDomElement n2 = n.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
+	    for ( TQDomElement n2 = n.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
 		if ( n2.tagName() == "function" ) {
-		    QString fname = n2.attribute( "name" );
+		    TQString fname = n2.attribute( "name" );
 		    fname = Parser::cleanArgs( fname );
 		    functionImpls.insert( fname, n2.firstChild().toText().data() );
 		}
@@ -160,11 +160,11 @@ void Uic::createFormImpl( const QDomElement &e )
     // additional includes (local or global ) and forward declaractions
     nl = e.parentNode().toElement().elementsByTagName( "include" );
     for ( i = 0; i < (int) nl.length(); i++ ) {
-	QDomElement n2 = nl.item(i).toElement();
+	TQDomElement n2 = nl.item(i).toElement();
         
-	QString s = n2.firstChild().toText().data();
+	TQString s = n2.firstChild().toText().data();
 	if ( n2.attribute( "location" ) != "local" ) {
-	    if ( s.right( 5 ) == ".ui.h" && !QFile::exists( s ) )
+	    if ( s.right( 5 ) == ".ui.h" && !TQFile::exists( s ) )
 		continue;
 	    if ( n2.attribute( "impldecl", "in implementation" ) != "in implementation" )
 		continue;
@@ -173,32 +173,32 @@ void Uic::createFormImpl( const QDomElement &e )
     }
 
     // do the local includes afterwards, since global includes have priority on clashes
-    QFileInfo fi(fileName);
+    TQFileInfo fi(fileName);
 
     for ( i = 0; i < (int) nl.length(); i++ ) {
-	QDomElement n2 = nl.item(i).toElement();
-	QString s = n2.firstChild().toText().data();
+	TQDomElement n2 = nl.item(i).toElement();
+	TQString s = n2.firstChild().toText().data();
 	if ( n2.attribute( "location" ) == "local" &&!globalIncludes.contains( s ) ) {
 	    if ( s.right( 5 ) != ".ui.h" )
 		continue;
 
-            if ( !QFile::exists( s ) )
+            if ( !TQFile::exists( s ) )
 	    {
 		s = fi.dirPath() + "/" + s;
 
-		if ( !QFile::exists( s ) )
+		if ( !TQFile::exists( s ) )
 		    continue;
 	    }
 
-            if ( QFile::exists( s ) )
+            if ( TQFile::exists( s ) )
             {
-                QFile f(s);
+                TQFile f(s);
                 f.open(IO_ReadOnly);
-                QTextStream headerStream(&f);
-                QString line;
-                QString functionText;
-                QString functionName;
-                QRegExp rx("void .*::(.*\\(.*\\))"); 
+                TQTextStream headerStream(&f);
+                TQString line;
+                TQString functionText;
+                TQString functionName;
+                TQRegExp rx("void .*::(.*\\(.*\\))"); 
                 int pos, inFunction = 0;
 
                 while (line = headerStream.readLine())
@@ -226,8 +226,8 @@ void Uic::createFormImpl( const QDomElement &e )
     // additional custom widget headers
     nl = e.parentNode().toElement().elementsByTagName( "header" );
     for ( i = 0; i < (int) nl.length(); i++ ) {
-	QDomElement n2 = nl.item(i).toElement();
-	QString s = n2.firstChild().toText().data();
+	TQDomElement n2 = nl.item(i).toElement();
+	TQString s = n2.firstChild().toText().data();
 	if ( n2.attribute( "location" ) != "local" )
 	    globalIncludes += s;
     }
@@ -236,7 +236,7 @@ void Uic::createFormImpl( const QDomElement &e )
     for ( it = tags.begin(); it != tags.end(); ++it ) {
 	nl = e.parentNode().toElement().elementsByTagName( *it );
 	for ( i = 1; i < (int) nl.length(); i++ ) { // start at 1, 0 is the toplevel widget
-	    QString name = getClassName( nl.item(i).toElement() );
+	    TQString name = getClassName( nl.item(i).toElement() );
 	    if ( name == "Spacer" ) {
 		globalIncludes += "qlayout.h";
 		globalIncludes += "qapplication.h";
@@ -244,13 +244,13 @@ void Uic::createFormImpl( const QDomElement &e )
 	    }
 	    if ( name.mid( 1 ) == "ListView" )
 		globalIncludes += "qheader.h";
-	    else if ( name == "QAxWidget" )
+	    else if ( name == "TQAxWidget" )
 		axwidgets += getObjectName(nl.item(i).toElement());
-	    else if ( name == "QDataBrowser" )
+	    else if ( name == "TQDataBrowser" )
 		databrowsers += getObjectName(nl.item(i).toElement());
 	    if ( name != objClass ) {
 		int wid = WidgetDatabase::idFromClassName( name );
-		QMap<QString, CustomInclude>::Iterator it = customWidgetIncludes.find( name );
+		TQMap<TQString, CustomInclude>::Iterator it = customWidgetIncludes.find( name );
 		if ( it == customWidgetIncludes.end() )
 		    globalIncludes += WidgetDatabase::includeFile( wid );
 	    }
@@ -258,10 +258,10 @@ void Uic::createFormImpl( const QDomElement &e )
     }
 
     if (globalIncludes.findIndex("qtable.h") >= 0)
-	out << indent << "from qttable import QTable" << endl;
+	out << indent << "from qttable import TQTable" << endl;
 
     if (!axwidgets.empty())
-	out << indent << "from qtaxcontainer import QAxWidget" << endl;
+	out << indent << "from qtaxcontainer import TQAxWidget" << endl;
 
     if (globalIncludes.findIndex("qextscintilla.h") >= 0)
 	out << indent << "from qtext import QextScintilla" << endl;
@@ -269,9 +269,9 @@ void Uic::createFormImpl( const QDomElement &e )
     registerDatabases( e );
     dbConnections = unique( dbConnections );
     if ( dbConnections.count() )
-	sqlClasses += "QSqlDatabase";
+	sqlClasses += "TQSqlDatabase";
     if ( dbCursors.count() )
-	sqlClasses += "QSqlCursor";
+	sqlClasses += "TQSqlCursor";
     bool dbForm = FALSE;
     if ( dbForms[ "(default)" ].count() )
 	dbForm = TRUE;
@@ -285,21 +285,21 @@ void Uic::createFormImpl( const QDomElement &e )
 	}
     }
     if ( dbForm || subDbForms ) {
-	sqlClasses += "QSqlForm";
-	sqlClasses += "QSqlRecord";
+	sqlClasses += "TQSqlForm";
+	sqlClasses += "TQSqlRecord";
     }
 
     if (globalIncludes.findIndex("qdatatable.h") >= 0)
-        sqlClasses += "QDataTable";
+        sqlClasses += "TQDataTable";
 
     if (globalIncludes.findIndex("qtableview.h") >= 0)
-        sqlClasses += "QTableView";
+        sqlClasses += "TQTableView";
 
     if (globalIncludes.findIndex("qdatabrowser.h") >= 0)
-        sqlClasses += "QDataBrowser";
+        sqlClasses += "TQDataBrowser";
 
     if (globalIncludes.findIndex("qdataview.h") >= 0)
-        sqlClasses += "QDataView";
+        sqlClasses += "TQDataView";
 
     if ( !sqlClasses.empty() ) {
 	out << indent << "from qtsql import";
@@ -319,43 +319,43 @@ void Uic::createFormImpl( const QDomElement &e )
 
     out << endl;
 
-    // find out what images are required
-    QStringList requiredImages;
+    // find out what images are retquired
+    TQStringList retquiredImages;
     static const char *imgTags[] = { "pixmap", "iconset", 0 };
     for ( i = 0; imgTags[i] != 0; i++ ) {
 	nl = e.parentNode().toElement().elementsByTagName( imgTags[i] );
 	for ( int j = 0; j < (int) nl.length(); j++ ) {
-	    QDomNode nn = nl.item(j);
+	    TQDomNode nn = nl.item(j);
 	    while ( nn.parentNode() != e.parentNode() )
 		nn = nn.parentNode();
 	    if ( nn.nodeName() != "customwidgets" )
-		requiredImages += nl.item(j).firstChild().toText().data();
+		retquiredImages += nl.item(j).firstChild().toText().data();
 	}
     }
 
     // register the object and unify its name
     objName = registerObject( objName );
 
-    QStringList images;
-    QStringList xpmImages;
+    TQStringList images;
+    TQStringList xpmImages;
     if ( pixmapLoaderFunction.isEmpty() && !externPixmaps ) {
 	// create images
 	for ( n = e; !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( n.tagName()  == "images" ) {
 		nl = n.elementsByTagName( "image" );
 		for ( i = 0; i < (int) nl.length(); i++ ) {
-		    QString img = registerObject(  nl.item(i).toElement().attribute( "name" ) );
-		    if ( !requiredImages.contains( img ) )
+		    TQString img = registerObject(  nl.item(i).toElement().attribute( "name" ) );
+		    if ( !retquiredImages.contains( img ) )
 			continue;
-		    QDomElement tmp = nl.item(i).firstChild().toElement();
+		    TQDomElement tmp = nl.item(i).firstChild().toElement();
 		    if ( tmp.tagName() != "data" )
 			continue;
-		    QString format = tmp.attribute("format", "PNG" );
-		    QString data = tmp.firstChild().toText().data();
+		    TQString format = tmp.attribute("format", "PNG" );
+		    TQString data = tmp.firstChild().toText().data();
 		    if ( format == "XPM.GZ" ) {
 			xpmImages += img;
 			ulong length = tmp.attribute("length").toULong();
-			QByteArray baunzip = unzipXPM( data, length );
+			TQByteArray baunzip = unzipXPM( data, length );
 			length = baunzip.size();
 			// shouldn't we test the initial `length' against the
 			// resulting `length' to catch corrupt UIC files?
@@ -383,11 +383,11 @@ void Uic::createFormImpl( const QDomElement &e )
 			out << indent << "\"";
 			int a ;
 			for ( a = 0; a < (int) (data.length()/2)-1; a++ ) {
-			    out << "\\x" << QString(data[2*a]) << QString(data[2*a+1]);
+			    out << "\\x" << TQString(data[2*a]) << TQString(data[2*a+1]);
 			    if ( a % 12 == 11 )
 				out << "\" \\" << endl << indent << "\"";
 			}
-			out << "\\x" << QString(data[2*a]) << QString(data[2*a+1]) << "\"" << endl;
+			out << "\\x" << TQString(data[2*a]) << TQString(data[2*a+1]) << "\"" << endl;
 			--indent;
 		    }
 		}
@@ -396,16 +396,16 @@ void Uic::createFormImpl( const QDomElement &e )
 	out << endl;
     } else if ( externPixmaps ) {
 #if QT_VERSION >= 0x030100
-	pixmapLoaderFunction = "QPixmap.fromMimeSource";
+	pixmapLoaderFunction = "TQPixmap.fromMimeSource";
 #else
 	out << indent << "def uic_load_pixmap_" << objName << "(name):" << endl;
 	++indent;
-	out << indent << "pix = QPixmap()" << endl;
-	out << indent << "m = QMimeSourceFactory.defaultFactory().data(name)" << endl;
+	out << indent << "pix = TQPixmap()" << endl;
+	out << indent << "m = TQMimeSourceFactory.defaultFactory().data(name)" << endl;
 	out << endl;
 	out << indent << "if m:" << endl;
 	++indent;
-	out << indent << "QImageDrag.decode(m,pix)" << endl;
+	out << indent << "TQImageDrag.decode(m,pix)" << endl;
 	--indent;
 	out << endl;
 	out << indent << "return pix" << endl;
@@ -422,15 +422,15 @@ void Uic::createFormImpl( const QDomElement &e )
     out << indent << "class " << nameOfClass << "(" << objClass << "):" << endl;
     ++indent;
 
-    if ( objClass == "QDialog" || objClass == "QWizard" ) {
+    if ( objClass == "TQDialog" || objClass == "TQWizard" ) {
 	out << indent << "def __init__(self,parent = None,name = None,modal = 0,fl = 0):" << endl;
 	++indent;
 	out << indent << objClass << ".__init__(self,parent,name,modal,fl)" << endl;
-    } else if ( objClass == "QWidget" )  {
+    } else if ( objClass == "TQWidget" )  {
 	out << indent << "def __init__(self,parent = None,name = None,fl = 0):" << endl;
 	++indent;
 	out << indent << objClass << ".__init__(self,parent,name,fl)" << endl;
-    } else if ( objClass == "QMainWindow" ) {
+    } else if ( objClass == "TQMainWindow" ) {
 	out << indent << "def __init__(self,parent = None,name = None,fl = 0):" << endl;
 	++indent;
 	out << indent << objClass << ".__init__(self,parent,name,fl)" << endl;
@@ -446,37 +446,37 @@ void Uic::createFormImpl( const QDomElement &e )
 
     // create pixmaps for all images
     if ( !images.isEmpty() ) {
-	QStringList::Iterator it;
+	TQStringList::Iterator it;
 	for ( it = images.begin(); it != images.end(); ++it ) {
-	    out << indent << "self." << (*it) << " = QPixmap()" << endl;
+	    out << indent << "self." << (*it) << " = TQPixmap()" << endl;
 	    out << indent << "self." << (*it) << ".loadFromData(" << (*it) << "_data,\"PNG\")" << endl;
 	}
     }
     // create pixmaps for all images
     if ( !xpmImages.isEmpty() ) {
 	for ( it = xpmImages.begin(); it != xpmImages.end(); ++it ) {
-	    out << indent << "self." << (*it) << " = QPixmap(" << (*it) << "_data)" << endl;
+	    out << indent << "self." << (*it) << " = TQPixmap(" << (*it) << "_data)" << endl;
 	}
 	out << endl;
     }
 
 
     // set the properties
-    QSize geometry( 0, 0 );
+    TQSize geometry( 0, 0 );
 
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "property" ) {
 	    bool stdset = stdsetdef;
 	    if ( n.hasAttribute( "stdset" ) )
 		stdset = toBool( n.attribute( "stdset" ) );
-	    QString prop = n.attribute("name");
-	    QDomElement n2 = n.firstChild().toElement();
-	    QString value = setObjectProperty( objClass, QString::null, prop, n2, stdset );
+	    TQString prop = n.attribute("name");
+	    TQDomElement n2 = n.firstChild().toElement();
+	    TQString value = setObjectProperty( objClass, TQString::null, prop, n2, stdset );
 	    if ( value.isEmpty() )
 		continue;
 
 	    if ( prop == "geometry" && n2.tagName() == "rect") {
-		QDomElement n3 = n2.firstChild().toElement();
+		TQDomElement n3 = n2.firstChild().toElement();
 		while ( !n3.isNull() ) {
 		    if ( n3.tagName() == "width" )
 			geometry.setWidth( n3.firstChild().toText().data().toInt() );
@@ -485,11 +485,11 @@ void Uic::createFormImpl( const QDomElement &e )
 		    n3 = n3.nextSibling().toElement();
 		}
 	    } else {
-		QString call;
+		TQString call;
 		if ( stdset )
 		    call = "self." + mkStdSet( prop ) + "(" + value + ")";
 		else
-		    call = "self.setProperty(\"" + prop + "\",QVariant(" + value + "))";
+		    call = "self.setProperty(\"" + prop + "\",TQVariant(" + value + "))";
 
                 if ( n2.tagName() == "string" ) {
                     trout << trindent << call << endl;
@@ -508,17 +508,17 @@ void Uic::createFormImpl( const QDomElement &e )
 
     out << endl;
 
-    // create all children, some forms have special requirements
+    // create all children, some forms have special retquirements
 
-    if ( objClass == "QWizard" ) {
+    if ( objClass == "TQWizard" ) {
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( tags.contains( n.tagName()  ) ) {
-		QString page = createObjectImpl( n, objClass, "self" );
-		QString comment;
-		QString label = DomTool::readAttribute( n, "title", "", comment ).toString();
-		out << indent << "self.addPage(" << page << ",QString(\"\"))" << endl;
+		TQString page = createObjectImpl( n, objClass, "self" );
+		TQString comment;
+		TQString label = DomTool::readAttribute( n, "title", "", comment ).toString();
+		out << indent << "self.addPage(" << page << ",TQString(\"\"))" << endl;
 		trout << trindent << "self.setTitle(" << page << ","<< trcall( label, comment ) << ")" << endl;
-		QVariant def( FALSE, 0 );
+		TQVariant def( FALSE, 0 );
 		if ( DomTool::hasAttribute( n, "backEnabled" ) )
 		    out << indent << "self.setBackEnabled(" << page << "," << mkBool( DomTool::readAttribute( n, "backEnabled", def).toBool() ) << ")" << endl;
 		if ( DomTool::hasAttribute( n, "nextEnabled" ) )
@@ -544,20 +544,20 @@ void Uic::createFormImpl( const QDomElement &e )
 	out << endl;
     for ( it = dbConnections.begin(); it != dbConnections.end(); ++it ) {
 	if ( !(*it).isEmpty() && (*it) != "(default)") {
-	    out << indent << "self." << (*it) << "Connection = QSqlDatabase.database(\"" <<(*it) << "\")" << endl;
+	    out << indent << "self." << (*it) << "Connection = TQSqlDatabase.database(\"" <<(*it) << "\")" << endl;
 	}
     }
 
     nl = e.parentNode().toElement().elementsByTagName( "widget" );
     for ( i = 1; i < (int) nl.length(); i++ ) { // start at 1, 0 is the toplevel widget
 	n = nl.item(i).toElement();
-	QString s = getClassName( n );
-	if ( (dbForm || subDbForms) && (s == "QDataBrowser" || s == "QDataView") ) {
-	    QString objName = getObjectName( n );
-	    QString tab = getDatabaseInfo( n, "table" );
-	    QString con = getDatabaseInfo( n, "connection" );
-	    out << indent << objName << "Form = QSqlForm(self,\"" << objName << "Form\")" << endl;
-	    QDomElement n2;
+	TQString s = getClassName( n );
+	if ( (dbForm || subDbForms) && (s == "TQDataBrowser" || s == "TQDataView") ) {
+	    TQString objName = getObjectName( n );
+	    TQString tab = getDatabaseInfo( n, "table" );
+	    TQString con = getDatabaseInfo( n, "connection" );
+	    out << indent << objName << "Form = TQSqlForm(self,\"" << objName << "Form\")" << endl;
+	    TQDomElement n2;
 	    for ( n2 = n.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() )
 		createFormImpl( n2, objName, con, tab );
 	    out << indent << "self." << objName << ".setForm(" << objName << "Form)" << endl;
@@ -605,9 +605,9 @@ void Uic::createFormImpl( const QDomElement &e )
 
     // take minimumSizeHint() into account, for height-for-width widgets
     if ( !geometry.isNull() ) {
-        out << indent << "self.resize(QSize(" << geometry.width() << ","
+        out << indent << "self.resize(TQSize(" << geometry.width() << ","
             << geometry.height() <<").expandedTo(self.minimumSizeHint()))" << endl;
-	out << indent << "self.clearWState(Qt.WState_Polished)" << endl;
+	out << indent << "self.clearWState(TQt.WState_Polished)" << endl;
     }
 
     for ( n = e; !n.isNull(); n = n.nextSibling().toElement() ) {
@@ -616,8 +616,8 @@ void Uic::createFormImpl( const QDomElement &e )
 	    out << endl;
 	    nl = n.elementsByTagName( "connection" );
 	    for ( i = 0; i < (int) nl.length(); i++ ) {
-		QString sender, receiver, signal, slot;
-		for ( QDomElement n2 = nl.item(i).firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
+		TQString sender, receiver, signal, slot;
+		for ( TQDomElement n2 = nl.item(i).firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
 		    if ( n2.tagName() == "sender" )
 			sender = n2.firstChild().toText().data();
 		    else if ( n2.tagName() == "receiver" )
@@ -660,15 +660,15 @@ void Uic::createFormImpl( const QDomElement &e )
 
 		// Normally we never use the SLOT() macro in case the
 		// connection is to a method of a Python custom widget.  The
-		// exception is if the receiver is a QAxWidget where it must be
+		// exception is if the receiver is a TQAxWidget where it must be
 		// used because the slots are dynamic.
 		if (isaxwidget)
 		    out << ",SLOT(\"" << slot << "\")";
 		else
 		{
-		    QString mname = slot.left(slot.find('('));
+		    TQString mname = slot.left(slot.find('('));
 
-		    // Rename slots that have different names in PyQt.
+		    // Rename slots that have different names in PyTQt.
 		    if (isdatabrowser && mname == "del")
 			    mname = "delOnCursor";
 
@@ -680,11 +680,11 @@ void Uic::createFormImpl( const QDomElement &e )
 	} else if ( n.tagName()  == "tabstops" ) {
 	    // setup tab order
 	    out << endl;
-	    QString lastName;
-	    QDomElement n2 = n.firstChild().toElement();
+	    TQString lastName;
+	    TQDomElement n2 = n.firstChild().toElement();
 	    while ( !n2.isNull() ) {
 		if ( n2.tagName() == "tabstop" ) {
-		    QString name = n2.firstChild().toText().data();
+		    TQString name = n2.firstChild().toText().data();
 		    name = registeredName( name );
 		    if ( !lastName.isEmpty() )
 			out << indent << "self.setTabOrder(self." << lastName << ",self." << name << ")" << endl;
@@ -697,7 +697,7 @@ void Uic::createFormImpl( const QDomElement &e )
 
     // buddies
     bool firstBuddy = TRUE;
-    for ( QValueList<Buddy>::Iterator buddy = buddies.begin(); buddy != buddies.end(); ++buddy ) {
+    for ( TQValueList<Buddy>::Iterator buddy = buddies.begin(); buddy != buddies.end(); ++buddy ) {
 	if ( isObjectRegistered( (*buddy).buddy ) ) {
 	    if ( firstBuddy ) {
 		out << endl;
@@ -723,7 +723,7 @@ void Uic::createFormImpl( const QDomElement &e )
 	--indent;
     }
 
-    // handle application events if required
+    // handle application events if retquired
     bool needFontEventHandler = FALSE;
     bool needSqlTableEventHandler = FALSE;
     bool needSqlDataBrowserEventHandler = FALSE;
@@ -731,13 +731,13 @@ void Uic::createFormImpl( const QDomElement &e )
     for ( i = 0; i < (int) nl.length(); i++ ) {
 	if ( !DomTool::propertiesOfType( nl.item(i).toElement() , "font" ).isEmpty() )
 	    needFontEventHandler = TRUE;
-	QString s = getClassName( nl.item(i).toElement() );
-	if ( s == "QDataTable" || s == "QDataBrowser" ) {
+	TQString s = getClassName( nl.item(i).toElement() );
+	if ( s == "TQDataTable" || s == "TQDataBrowser" ) {
 	    if ( !isFrameworkCodeGenerated( nl.item(i).toElement() ) )
 		 continue;
-	    if ( s == "QDataTable" )
+	    if ( s == "TQDataTable" )
 		needSqlTableEventHandler = TRUE;
-	    if ( s == "QDataBrowser" )
+	    if ( s == "TQDataBrowser" )
 		needSqlDataBrowserEventHandler = TRUE;
 	}
 	if ( needFontEventHandler && needSqlTableEventHandler && needSqlDataBrowserEventHandler )
@@ -749,15 +749,15 @@ void Uic::createFormImpl( const QDomElement &e )
 	out << " *  Main event handler. Reimplemented to handle" << endl;
 	out << " *  application font changes";
 	out << " */" << endl;
-	out << "bool " << nameOfClass  << "::event( QEvent* ev )" << endl;
+	out << "bool " << nameOfClass  << "::event( TQEvent* ev )" << endl;
 	out << "{" << endl;
 	out << "    bool ret = " << objClass << "::event( ev ); " << endl;
 	if ( needFontEventHandler ) {
 	    ++indent;
-	    out << "    if ( ev->type() == QEvent::ApplicationFontChange ) {" << endl;
+	    out << "    if ( ev->type() == TQEvent::ApplicationFontChange ) {" << endl;
 	    for ( i = 0; i < (int) nl.length(); i++ ) {
 		n = nl.item(i).toElement();
-		QStringList list = DomTool::propertiesOfType( n, "font" );
+		TQStringList list = DomTool::propertiesOfType( n, "font" );
 		for ( it = list.begin(); it != list.end(); ++it )
 		    createExclusiveProperty( n, *it );
 	    }
@@ -779,12 +779,12 @@ void Uic::createFormImpl( const QDomElement &e )
 	++indent;
 	if ( needSqlTableEventHandler ) {
 	    for ( i = 0; i < (int) nl.length(); i++ ) {
-		QString s = getClassName( nl.item(i).toElement() );
-		if ( s == "QDataTable" ) {
+		TQString s = getClassName( nl.item(i).toElement() );
+		if ( s == "TQDataTable" ) {
 		    n = nl.item(i).toElement();
-		    QString c = getObjectName( n );
-		    QString conn = getDatabaseInfo( n, "connection" );
-		    QString tab = getDatabaseInfo( n, "table" );
+		    TQString c = getObjectName( n );
+		    TQString conn = getDatabaseInfo( n, "connection" );
+		    TQString tab = getDatabaseInfo( n, "table" );
 		    if ( !( conn.isEmpty() || tab.isEmpty() || !isFrameworkCodeGenerated( nl.item(i).toElement() ) ) ) {
 			out << indent << "if self." << c << ":" << endl;
 			++indent;
@@ -793,19 +793,19 @@ void Uic::createFormImpl( const QDomElement &e )
 			out << indent << "if not cursor:" << endl;
 			++indent;
 			if ( conn == "(default)" )
-			    out << indent << "cursor = QSqlCursor(\"" << tab << "\")" << endl;
+			    out << indent << "cursor = TQSqlCursor(\"" << tab << "\")" << endl;
 			else
-			    out << indent << "cursor = QSqlCursor(\"" << tab << "\",1,self." << conn << "Connection)" << endl;
+			    out << indent << "cursor = TQSqlCursor(\"" << tab << "\",1,self." << conn << "Connection)" << endl;
 			out << indent << "if self." << c << ".isReadOnly():" << endl;
 			++indent;
-			out << indent << "cursor.setMode(QSqlCursor.ReadOnly)" << endl;
+			out << indent << "cursor.setMode(TQSqlCursor.ReadOnly)" << endl;
 			--indent;
 			out << indent << "self." << c << ".setSqlCursor(cursor,0,1)" << endl;
 			--indent;
 			out << endl;
 			out << indent << "if not cursor.isActive():" << endl;
 			++indent;
-			out << indent << "self." << c << ".refresh(QDataTable.RefreshAll)" << endl;
+			out << indent << "self." << c << ".refresh(TQDataTable.RefreshAll)" << endl;
 			--indent;
 			--indent;
 		    }
@@ -815,12 +815,12 @@ void Uic::createFormImpl( const QDomElement &e )
 	if ( needSqlDataBrowserEventHandler ) {
 	    nl = e.elementsByTagName( "widget" );
 	    for ( i = 0; i < (int) nl.length(); i++ ) {
-		QString s = getClassName( nl.item(i).toElement() );
-		if ( s == "QDataBrowser" ) {
-		    QString obj = getObjectName( nl.item(i).toElement() );
-		    QString tab = getDatabaseInfo( nl.item(i).toElement(),
+		TQString s = getClassName( nl.item(i).toElement() );
+		if ( s == "TQDataBrowser" ) {
+		    TQString obj = getObjectName( nl.item(i).toElement() );
+		    TQString tab = getDatabaseInfo( nl.item(i).toElement(),
 						   "table" );
-		    QString conn = getDatabaseInfo( nl.item(i).toElement(),
+		    TQString conn = getDatabaseInfo( nl.item(i).toElement(),
 						    "connection" );
 		    if ( !(tab.isEmpty() || !isFrameworkCodeGenerated( nl.item(i).toElement() ) ) ) {
 			out << indent << "if self." << obj << ":" << endl;
@@ -828,9 +828,9 @@ void Uic::createFormImpl( const QDomElement &e )
 			out << indent << "if not self." << obj << ".sqlCursor():" << endl;
 			++indent;
 			if ( conn == "(default)" )
-			    out << indent << "cursor = QSqlCursor(\"" << tab << "\")" << endl;
+			    out << indent << "cursor = TQSqlCursor(\"" << tab << "\")" << endl;
 			else
-			    out << indent << "cursor = QSqlCursor(\"" << tab << "\",1,self." << conn << "Connection)" << endl;
+			    out << indent << "cursor = TQSqlCursor(\"" << tab << "\",1,self." << conn << "Connection)" << endl;
 			out << indent << "self." << obj << ".setSqlCursor(cursor,1)" << endl;
 			out << indent << "self." << obj << ".refresh()" << endl;
 			out << indent << "self." << obj << ".first()" << endl;
@@ -853,22 +853,22 @@ void Uic::createFormImpl( const QDomElement &e )
 
     // create  stubs for additional slots if necessary
     if ( !extraSlots.isEmpty() && writeFunctImpl ) {
-	QStringList::ConstIterator cit;
+	TQStringList::ConstIterator cit;
 
 	for ( cit = extraSlots.begin(); cit != extraSlots.end(); ++cit ) {
 	    pySlot(cit);
 
 	    bool createWarning = TRUE;
-	    QString fname = Parser::cleanArgs( *cit );
-	    QMap<QString, QString>::Iterator fit = functionImpls.find( fname );
+	    TQString fname = Parser::cleanArgs( *cit );
+	    TQMap<TQString, TQString>::Iterator fit = functionImpls.find( fname );
 	    if ( fit != functionImpls.end() ) {
 		int begin = (*fit).find( "{" );
-		QString body = (*fit).mid( begin + 1, (*fit).findRev( "}" ) - begin - 1 );
+		TQString body = (*fit).mid( begin + 1, (*fit).findRev( "}" ) - begin - 1 );
 		createWarning = body.simplifyWhiteSpace().isEmpty();
 		if ( !createWarning )
                 {
 		    ++indent;
-                    QString formatted_body = body.replace(QRegExp("\n"), QString("\n") + QString(indent));
+                    TQString formatted_body = body.replace(TQRegExp("\n"), TQString("\n") + TQString(indent));
                     out << formatted_body << endl;
                     --indent;
                 }
@@ -895,17 +895,17 @@ void Uic::createFormImpl( const QDomElement &e )
   Traverses recursively over all children.
  */
 
-void Uic::createFormImpl( const QDomElement& e, const QString& form, const QString& connection, const QString& table )
+void Uic::createFormImpl( const TQDomElement& e, const TQString& form, const TQString& connection, const TQString& table )
 {
     if ( e.tagName() == "widget" &&
-	 e.attribute( "class" ) != "QDataTable" ) {
-	QString field = getDatabaseInfo( e, "field" );
+	 e.attribute( "class" ) != "TQDataTable" ) {
+	TQString field = getDatabaseInfo( e, "field" );
 	if ( !field.isEmpty() ) {
 	    if ( isWidgetInTable( e, connection, table ) )
 		out << indent << form << "Form.insert(self." << getObjectName( e ) << "," << fixString( field ) << ")" << endl;
 	}
     }
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	createFormImpl( n, form, connection, table );
     }
@@ -914,7 +914,7 @@ void Uic::createFormImpl( const QDomElement& e, const QString& form, const QStri
 
 // Generate a Python slot definition.
 
-void Uic::pySlot(QStringList::ConstIterator &it)
+void Uic::pySlot(TQStringList::ConstIterator &it)
 {
     out << endl;
 
@@ -925,7 +925,7 @@ void Uic::pySlot(QStringList::ConstIterator &it)
     // remove the types - too complicated for the moment, so we just count them
     // and give them names based on their position.
  
-    QString args = (*it).mid(astart + 1,(*it).find(')') - astart - 1).stripWhiteSpace();
+    TQString args = (*it).mid(astart + 1,(*it).find(')') - astart - 1).stripWhiteSpace();
  
     if (!args.isEmpty()) {
 	int nrargs = args.contains(',') + 1;
diff --git a/pyuic3/globaldefs.h b/pyuic3/globaldefs.h
index 4ae0cd8..65f5974 100644
--- a/pyuic3/globaldefs.h
+++ b/pyuic3/globaldefs.h
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -28,9 +28,9 @@
 #define BOXLAYOUT_DEFAULT_SPACING 6
 
 #ifndef NO_STATIC_COLORS
-static QColor *backColor1 = 0;
-static QColor *backColor2 = 0;
-static QColor *selectedBack = 0;
+static TQColor *backColor1 = 0;
+static TQColor *backColor2 = 0;
+static TQColor *selectedBack = 0;
 
 static void init_colors()
 {
@@ -38,17 +38,17 @@ static void init_colors()
 	return;
 
 #if 0 // a calculated alternative for backColor1
-    QColorGroup myCg = qApp->palette().active();
+    TQColorGroup myCg = qApp->palette().active();
     int h1, s1, v1;
     int h2, s2, v2;
-    myCg.color( QColorGroup::Base ).hsv( &h1, &s1, &v1 );
-    myCg.color( QColorGroup::Background ).hsv( &h2, &s2, &v2 );
-    QColor c( h1, s1, ( v1 + v2 ) / 2, QColor::Hsv );
+    myCg.color( TQColorGroup::Base ).hsv( &h1, &s1, &v1 );
+    myCg.color( TQColorGroup::Background ).hsv( &h2, &s2, &v2 );
+    TQColor c( h1, s1, ( v1 + v2 ) / 2, TQColor::Hsv );
 #endif
 
-    backColor1 = new QColor(  250, 248, 235 );
-    backColor2 = new QColor( 255, 255, 255 );
-    selectedBack = new QColor( 230, 230, 230 );
+    backColor1 = new TQColor(  250, 248, 235 );
+    backColor2 = new TQColor( 255, 255, 255 );
+    selectedBack = new TQColor( 230, 230, 230 );
 }
 
 #endif
diff --git a/pyuic3/main.cpp b/pyuic3/main.cpp
index 265a536..2cd8e5b 100644
--- a/pyuic3/main.cpp
+++ b/pyuic3/main.cpp
@@ -2,7 +2,7 @@
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 ** Copyright (c) 2001 Phil Thompson <phil@river-bank.demon.co.uk>
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -39,20 +39,20 @@ int main( int argc, char * argv[] )
     bool testCode = FALSE, execCode = FALSE;
     bool subcl = FALSE;
     bool imagecollection = FALSE;
-    QStringList images;
+    TQStringList images;
     const char *error = 0;
     const char* fileName = 0;
-    QCString outputFile;
+    TQCString outputFile;
     const char* projectName = 0;
     const char* trmacro = 0;
     bool fix = FALSE;
-    QApplication app(argc, argv, FALSE);
-    QString className, uicClass;
+    TQApplication app(argc, argv, FALSE);
+    TQString className, uicClass;
 
     for ( int n = 1; n < argc && error == 0; n++ ) {
-	QCString arg = argv[n];
+	TQCString arg = argv[n];
 	if ( arg[0] == '-' ) {			// option
-	    QCString opt = &arg[1];
+	    TQCString opt = &arg[1];
 	    if ( opt[0] == 'o' ) {		// output redirection
 		if ( opt[1] == '\0' ) {
 		    if ( !(n < argc-1) ) {
@@ -91,7 +91,7 @@ int main( int argc, char * argv[] )
 		}
 	    } else if ( opt == "version" ) {
 		fprintf( stderr,
-			 "Python User Interface Compiler %s for Qt version %s\n",
+			 "Python User Interface Compiler %s for TQt version %s\n",
 			 PYQT_VERSION, QT_VERSION_STR );
 		return 1;
 	    } else if ( opt == "help" ) {
@@ -107,7 +107,7 @@ int main( int argc, char * argv[] )
 			error = "Missing Python indent";
 			break;
 		    }
-		    tabstop = QCString(argv[++n]).toUInt(&ok);
+		    tabstop = TQCString(argv[++n]).toUInt(&ok);
 		} else
 		    tabstop = opt.mid(1).toUInt(&ok);
 
@@ -133,7 +133,7 @@ int main( int argc, char * argv[] )
     }
 
     if ( argc < 2 || error || (!fileName && !imagecollection ) ) {
-	fprintf( stderr, "PyQt user interface compiler.\n" );
+	fprintf( stderr, "PyTQt user interface compiler.\n" );
 	if ( error )
 	    fprintf( stderr, "pyuic: %s\n", error );
 
@@ -150,7 +150,7 @@ int main( int argc, char * argv[] )
 		 "Options:\n"
 		 "\t-o file\t\tWrite output to file rather than stdout\n"
 		 "\t-p indent\tSet the Python indent in spaces (0 to use a tab)\n"
-		 "\t-tr func\tUse func() rather than QApplication.translate() for i18n\n"
+		 "\t-tr func\tUse func() rather than TQApplication.translate() for i18n\n"
 		 "\t-x\t\tGenerate extra code to test and display the class\n"
 		 "\t-test\t\tGenerate extra code to test but not display the class\n"
 		 "\t-version\tDisplay version of pyuic\n"
@@ -161,7 +161,7 @@ int main( int argc, char * argv[] )
 
     Uic::setIndent(indent);
 
-    QFile fileOut;
+    TQFile fileOut;
     if ( !outputFile.isEmpty() ) {
 	fileOut.setName( outputFile );
 	if (!fileOut.open( IO_WriteOnly ) )
@@ -169,30 +169,30 @@ int main( int argc, char * argv[] )
     } else {
 	fileOut.open( IO_WriteOnly, stdout );
     }
-    QTextStream out( &fileOut );
+    TQTextStream out( &fileOut );
 
     if ( imagecollection ) {
-	out.setEncoding( QTextStream::Latin1 );
+	out.setEncoding( TQTextStream::Latin1 );
 	out << "# -*- coding: latin-1 -*-\n\n";
 	Uic::embed( out, projectName, images );
 	return 0;
     }
 
 
-    out.setEncoding( QTextStream::UnicodeUTF8 );
-    QFile file( fileName );
+    out.setEncoding( TQTextStream::UnicodeUTF8 );
+    TQFile file( fileName );
     if ( !file.open( IO_ReadOnly ) )
 	qFatal( "pyuic: Could not open file '%s' ", fileName );
 
-    QDomDocument doc;
-    QString errMsg;
+    TQDomDocument doc;
+    TQString errMsg;
     int errLine;
     if ( !doc.setContent( &file, &errMsg, &errLine ) )
-	qFatal( QString("pyuic: Failed to parse %s: ") + errMsg + QString (" in line %d\n"), fileName, errLine );
+	qFatal( TQString("pyuic: Failed to parse %s: ") + errMsg + TQString (" in line %d\n"), fileName, errLine );
 
-    QDomElement e = doc.firstChild().toElement();
+    TQDomElement e = doc.firstChild().toElement();
     if ( e.hasAttribute("version") && e.attribute("version").toDouble() > 3.3 ) {
-	qWarning( QString("pyuic: File generated with too recent version of Qt Designer (%s vs. %s)"),
+	qWarning( TQString("pyuic: File generated with too recent version of TQt Designer (%s vs. %s)"),
 		  e.attribute("version").latin1(), QT_VERSION_STR );
 	return 1;
     }
@@ -209,8 +209,8 @@ int main( int argc, char * argv[] )
     if ( !subcl ) {
 	out << "# Form implementation generated from reading ui file '" << fileName << "'" << endl;
 	out << "#" << endl;
-	out << "# Created: " << QDateTime::currentDateTime().toString() << endl;
-	out << "#      by: The PyQt User Interface Compiler (pyuic) " << PYQT_VERSION << endl;
+	out << "# Created: " << TQDateTime::currentDateTime().toString() << endl;
+	out << "#      by: The PyTQt User Interface Compiler (pyuic) " << PYQT_VERSION << endl;
 	out << "#" << endl;
 	out << "# WARNING! All changes made in this file will be lost!" << endl;
 	out << endl;
@@ -228,8 +228,8 @@ int main( int argc, char * argv[] )
 	out << endl;
 	out << indent << "if __name__ == \"__main__\":" << endl;
 	++indent;
-	out << indent << "a = QApplication(sys.argv)" << endl;
-	out << indent << "QObject.connect(a,SIGNAL(\"lastWindowClosed()\"),a,SLOT(\"quit()\"))" << endl;
+	out << indent << "a = TQApplication(sys.argv)" << endl;
+	out << indent << "TQObject.connect(a,SIGNAL(\"lastWindowClosed()\"),a,SLOT(\"quit()\"))" << endl;
 	out << indent << "w = " << (subcl ? className : uicClass) << "()" << endl;
 	out << indent << "a.setMainWidget(w)" << endl;
 
diff --git a/pyuic3/object.cpp b/pyuic3/object.cpp
index 834427f..1e05176 100644
--- a/pyuic3/object.cpp
+++ b/pyuic3/object.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -38,17 +38,17 @@
 
 static bool createdCentralWidget = FALSE;
 
-QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass, const QString& par, const QString& layout )
+TQString Uic::createObjectImpl( const TQDomElement &e, const TQString& parentClass, const TQString& par, const TQString& layout )
 {
-    QString parent( par );
+    TQString parent( par );
     if ( parent == "self" && isMainWindow ) {
 	if ( !createdCentralWidget )
-	    out << indent << "self.setCentralWidget(QWidget(self,\"qt_central_widget\"))" << endl;
+	    out << indent << "self.setCentralWidget(TQWidget(self,\"qt_central_widget\"))" << endl;
 	createdCentralWidget = TRUE;
 	parent = "self.centralWidget()";
     }
-    QDomElement n;
-    QString objClass, objName, fullObjName;
+    TQDomElement n;
+    TQString objClass, objName, fullObjName;
     int numItems = 0;
     int numColumns = 0;
     int numRows = 0;
@@ -61,8 +61,8 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 	return objName;
     objName = getObjectName( e );
 
-    QString definedName = objName;
-    bool isTmpObject = objName.isEmpty() || objClass == "QLayoutWidget";
+    TQString definedName = objName;
+    bool isTmpObject = objName.isEmpty() || objClass == "TQLayoutWidget";
     if ( isTmpObject ) {
 	if ( objClass[0] == 'Q' )
 	    objName = objClass.mid(1);
@@ -72,17 +72,17 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 
     bool isLine = objClass == "Line";
     if ( isLine )
-	objClass = "QFrame";
+	objClass = "TQFrame";
 
     out << endl;
-    if ( objClass == "QLayoutWidget" ) {
+    if ( objClass == "TQLayoutWidget" ) {
 	if ( layout.isEmpty() ) {
 	    // register the object and unify its name
 	    objName = registerObject( objName );
-	    out << indent << objName << " = QWidget(" << parent << ",\"" << definedName << "\")" << endl;
+	    out << indent << objName << " = TQWidget(" << parent << ",\"" << definedName << "\")" << endl;
 	} else {
 	    // the layout widget is not necessary, hide it by creating its child in the parent
-	    QString result;
+	    TQString result;
 	    for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 		if (tags.contains( n.tagName() ) )
 		    result = createObjectImpl( n, parentClass, parent, layout );
@@ -92,7 +92,7 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 
 	// Layouts don't go into the class instance dictionary.
 	fullObjName = objName;
-    } else if ( objClass != "QToolBar" && objClass != "QMenuBar" ) {
+    } else if ( objClass != "TQToolBar" && objClass != "TQMenuBar" ) {
 	// register the object and unify its name
 	objName = registerObject( objName );
 
@@ -104,8 +104,8 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
     else
 	fullObjName = "self." + objName;
 
-    if ( objClass == "QAxWidget" ) {
-	QString controlId;
+    if ( objClass == "TQAxWidget" ) {
+	TQString controlId;
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( n.tagName() == "property" && n.attribute( "name" ) == "control" ) {
 		controlId = n.firstChild().toElement().text();
@@ -122,10 +122,10 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 	    bool stdset = stdsetdef;
 	    if ( n.hasAttribute( "stdset" ) )
 		stdset = toBool( n.attribute( "stdset" ) );
-	    QString prop = n.attribute( "name" );
+	    TQString prop = n.attribute( "name" );
 	    if ( prop == "database" )
 		continue;
-	    QString value = setObjectProperty( objClass, objName, prop, n.firstChild().toElement(), stdset );
+	    TQString value = setObjectProperty( objClass, objName, prop, n.firstChild().toElement(), stdset );
 	    if ( value.isEmpty() )
 		continue;
 	    if ( prop == "name" )
@@ -139,35 +139,35 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 	    if ( isLine && prop == "orientation" ) {
 		prop = "frameShape";
 		if ( value.right(10) == "Horizontal" )
-		    value = "QFrame.HLine";
+		    value = "TQFrame.HLine";
 		else
-		    value = "QFrame.VLine";
+		    value = "TQFrame.VLine";
 		if ( !hadFrameShadow ) {
 		    prop = "frameStyle";
-		    value += " | QFrame.Sunken";
+		    value += " | TQFrame.Sunken";
 		}
 	    }
 	    if ( prop == "buttonGroupId" ) {
-		if ( parentClass == "QButtonGroup" )
+		if ( parentClass == "TQButtonGroup" )
 		    out << indent << parent << ".insert( " << fullObjName << "," << value << ")" << endl;
 		continue;
 	    }
 	    if ( prop == "frameworkCode" )
 		continue;
-	    if ( objClass == "QMultiLineEdit" &&
-		 QRegExp("echoMode|hMargin|maxLength|maxLines|undoEnabled").exactMatch(prop) )
+	    if ( objClass == "TQMultiLineEdit" &&
+		 TQRegExp("echoMode|hMargin|maxLength|maxLines|undoEnabled").exactMatch(prop) )
 		continue;
-	    QString call = fullObjName + ".";
-	    QString tail;
+	    TQString call = fullObjName + ".";
+	    TQString tail;
 	    if ( stdset ) {
 		call += mkStdSet( prop ) + "(";
 		tail = ")";
 	    } else {
-		call += "setProperty(\"" + prop + "\",QVariant(";
+		call += "setProperty(\"" + prop + "\",TQVariant(";
 		tail = "))";
 	    }
 	    if ( prop == "accel" ) {
-		call += "QKeySequence(";
+		call += "TQKeySequence(";
 		tail += ")";
 	    }
 	    call += value + tail;
@@ -179,8 +179,8 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
                 out << indent << call << endl;
             }
 	} else if ( n.tagName() == "item" ) {
-            QString call;
-            QString value;
+            TQString call;
+            TQString value;
 
 	    if ( objClass.contains( "ListBox" ) ) {
 		call = createListBoxItemImpl( n, fullObjName );
@@ -204,7 +204,7 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 		    trout << trindent << call << endl;
 		}
 	    } else if ( objClass.contains( "ListView" ) ) {
-		call = createListViewItemImpl( n, fullObjName, QString::null );
+		call = createListViewItemImpl( n, fullObjName, TQString::null );
 		if ( !call.isEmpty() ) {
                     if ( numItems == 0 )
                         trout << trindent << fullObjName << ".clear()" << endl;
@@ -214,8 +214,8 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
             if ( !call.isEmpty() )
                 numItems++;
 	} else if ( n.tagName() == "column" || n.tagName() == "row" ) {
-            QString call;
-            QString value;
+            TQString call;
+            TQString value;
 
 	    if ( objClass.contains( "ListView" ) ) {
 		call = createListViewColumnImpl( n, fullObjName, &value );
@@ -224,7 +224,7 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
                     trout << trindent << fullObjName << ".header().setLabel("
                           << numColumns++ << "," << value << ")\n";
 		}
-	    } else if ( objClass ==  "QTable" || objClass == "QDataTable" ) {
+	    } else if ( objClass ==  "TQTable" || objClass == "TQDataTable" ) {
 		bool isCols = ( n.tagName() == "column" );
 		call = createTableRowColumnImpl( n, fullObjName, &value );
 		if ( !call.isEmpty() ) {
@@ -239,39 +239,39 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
 	}
     }
 
-    // create all children, some widgets have special requirements
+    // create all children, some widgets have special retquirements
 
-    if ( objClass == "QTabWidget" ) {
+    if ( objClass == "TQTabWidget" ) {
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( tags.contains( n.tagName()  ) ) {
-		QString page = createObjectImpl( n, objClass, fullObjName );
-		QString comment;
-		QString label = DomTool::readAttribute( n, "title", "", comment ).toString();
-		out << indent << fullObjName << ".insertTab(" << page << ",QString.fromLatin1(\"\"))" << endl;
+		TQString page = createObjectImpl( n, objClass, fullObjName );
+		TQString comment;
+		TQString label = DomTool::readAttribute( n, "title", "", comment ).toString();
+		out << indent << fullObjName << ".insertTab(" << page << ",TQString.fromLatin1(\"\"))" << endl;
 		trout << trindent << fullObjName << ".changeTab(" << page << "," << trcall( label, comment ) << ")" << endl;
 	    }
 	}
-    } else if ( objClass == "QWidgetStack" ) {
+    } else if ( objClass == "TQWidgetStack" ) {
         for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
             if ( tags.contains( n.tagName()  ) ) {
-                QString page = createObjectImpl( n, objClass, fullObjName );
+                TQString page = createObjectImpl( n, objClass, fullObjName );
                 int id = DomTool::readAttribute( n, "id", "" ).toInt();
                 out << indent << fullObjName << ".addWidget(" << page << "," << id << ")" << endl;
             }
         }
-    } else if ( objClass == "QToolBox" ) {
+    } else if ( objClass == "TQToolBox" ) {
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( tags.contains( n.tagName()  ) ) {
-		QString page = createObjectImpl( n, objClass, fullObjName );
-		QString comment;
-		QString label = DomTool::readAttribute( n, "label", "", comment ).toString();
-		out << indent << fullObjName << ".addItem(" << page << ",QString.fromLatin1(\"\"))" << endl;
+		TQString page = createObjectImpl( n, objClass, fullObjName );
+		TQString comment;
+		TQString label = DomTool::readAttribute( n, "label", "", comment ).toString();
+		out << indent << fullObjName << ".addItem(" << page << ",TQString.fromLatin1(\"\"))" << endl;
 		trout << trindent << fullObjName << ".setItemLabel(" << fullObjName
 		      << ".indexOf(" << page << ")," << trcall( label, comment )
 		      << ")" << endl;
 	    }
 	}
-     } else if ( objClass != "QToolBar" && objClass != "QMenuBar" ) { // standard widgets
+     } else if ( objClass != "TQToolBar" && objClass != "TQMenuBar" ) { // standard widgets
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( tags.contains( n.tagName() ) )
 		createObjectImpl( n, objClass, fullObjName );
@@ -293,13 +293,13 @@ QString Uic::createObjectImpl( const QDomElement &e, const QString& parentClass,
   application font or palette change handlers in createFormImpl().
 
  */
-void Uic::createExclusiveProperty( const QDomElement & e, const QString& exclusiveProp )
+void Uic::createExclusiveProperty( const TQDomElement & e, const TQString& exclusiveProp )
 {
-    QDomElement n;
-    QString objClass = getClassName( e );
+    TQDomElement n;
+    TQString objClass = getClassName( e );
     if ( objClass.isEmpty() )
 	return;
-    QString objName = getObjectName( e );
+    TQString objName = getObjectName( e );
 #if 0 // it's not clear whether this check should be here or not
     if ( objName.isEmpty() )
 	return;
@@ -309,55 +309,55 @@ void Uic::createExclusiveProperty( const QDomElement & e, const QString& exclusi
 	    bool stdset = stdsetdef;
 	    if ( n.hasAttribute( "stdset" ) )
 		stdset = toBool( n.attribute( "stdset" ) );
-	    QString prop = n.attribute( "name" );
+	    TQString prop = n.attribute( "name" );
 	    if ( prop != exclusiveProp )
 		continue;
-	    QString value = setObjectProperty( objClass, objName, prop, n.firstChild().toElement(), stdset );
+	    TQString value = setObjectProperty( objClass, objName, prop, n.firstChild().toElement(), stdset );
 	    if ( value.isEmpty() )
 		continue;
-	    out << indent << indent << objName << ".setProperty(\"" << prop << "\",QVariant(" << value << "))" << endl;
+	    out << indent << indent << objName << ".setProperty(\"" << prop << "\",TQVariant(" << value << "))" << endl;
 	}
     }
 }
 
 
-/* Convert a QSizePolicy::SizeType to text. */
-static QString mapSizeType(QSizePolicy::SizeType st)
+/* Convert a TQSizePolicy::SizeType to text. */
+static TQString mapSizeType(TQSizePolicy::SizeType st)
 {
 	const char *txt;
 
 	switch (st)
 	{
-	case QSizePolicy::Fixed:
-		txt = "QSizePolicy.Fixed";
+	case TQSizePolicy::Fixed:
+		txt = "TQSizePolicy.Fixed";
 		break;
 
-	case QSizePolicy::Minimum:
-		txt = "QSizePolicy.Minimum";
+	case TQSizePolicy::Minimum:
+		txt = "TQSizePolicy.Minimum";
 		break;
 
-	case QSizePolicy::Maximum:
-		txt = "QSizePolicy.Maximum";
+	case TQSizePolicy::Maximum:
+		txt = "TQSizePolicy.Maximum";
 		break;
 
-	case QSizePolicy::Preferred:
-		txt = "QSizePolicy.Preferred";
+	case TQSizePolicy::Preferred:
+		txt = "TQSizePolicy.Preferred";
 		break;
 
-	case QSizePolicy::MinimumExpanding:
-		txt = "QSizePolicy.MinimumExpanding";
+	case TQSizePolicy::MinimumExpanding:
+		txt = "TQSizePolicy.MinimumExpanding";
 		break;
 
-	case QSizePolicy::Expanding:
-		txt = "QSizePolicy.Expanding";
+	case TQSizePolicy::Expanding:
+		txt = "TQSizePolicy.Expanding";
 		break;
 
-	case QSizePolicy::Ignored:
-		txt = "QSizePolicy.Ignored";
+	case TQSizePolicy::Ignored:
+		txt = "TQSizePolicy.Ignored";
 		break;
 
 	default:
-		txt = "Invalid QSizePolicy::SizeType";
+		txt = "Invalid TQSizePolicy::SizeType";
 	}
 
 	return txt;
@@ -368,11 +368,11 @@ static QString mapSizeType(QSizePolicy::SizeType st)
   Resource::saveProperty() and DomTool::elementToVariant. If you
   change one, change all.
  */
-QString Uic::setObjectProperty( const QString& objClass, const QString& obj, const QString &prop, const QDomElement &e, bool stdset )
+TQString Uic::setObjectProperty( const TQString& objClass, const TQString& obj, const TQString &prop, const TQDomElement &e, bool stdset )
 {
-    QString v;
+    TQString v;
     if ( e.tagName() == "rect" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int x = 0, y = 0, w = 0, h = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "x" )
@@ -385,11 +385,11 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		h = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QRect(%1,%2,%3,%4)";
+	v = "TQRect(%1,%2,%3,%4)";
 	v = v.arg(x).arg(y).arg(w).arg(h);
 
     } else if ( e.tagName() == "point" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int x = 0, y = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "x" )
@@ -398,10 +398,10 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		y = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QPoint(%1,%2)";
+	v = "TQPoint(%1,%2)";
 	v = v.arg(x).arg(y);
     } else if ( e.tagName() == "size" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int w = 0, h = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "width" )
@@ -410,10 +410,10 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		h = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QSize(%1,%2)";
+	v = "TQSize(%1,%2)";
 	v = v.arg(w).arg(h);
     } else if ( e.tagName() == "color" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int r = 0, g = 0, b = 0;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "red" )
@@ -424,18 +424,18 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		b = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QColor(%1,%2,%3)";
+	v = "TQColor(%1,%2,%3)";
 	v = v.arg(r).arg(g).arg(b);
     } else if ( e.tagName() == "font" ) {
-	QDomElement n3 = e.firstChild().toElement();
-	QString attrname = e.parentNode().toElement().attribute( "name", "font" );
-	QString fontname;
+	TQDomElement n3 = e.firstChild().toElement();
+	TQString attrname = e.parentNode().toElement().attribute( "name", "font" );
+	TQString fontname;
 	if ( !obj.isEmpty() ) {
 	    fontname = registerObject( obj + "_" + attrname );
-	    out << indent << fontname << " = QFont(self." << obj << ".font())" << endl;
+	    out << indent << fontname << " = TQFont(self." << obj << ".font())" << endl;
 	} else {
 	    fontname = registerObject( "f" );
-	    out << indent << fontname << " = QFont(self.font())" << endl;
+	    out << indent << fontname << " = TQFont(self.font())" << endl;
 	}
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "family" )
@@ -462,22 +462,22 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	    v = fontname;
 	}
     } else if ( e.tagName() == "string" ) {
-	QString txt = e.firstChild().toText().data();
-	QString com = getComment( e.parentNode() );
+	TQString txt = e.firstChild().toText().data();
+	TQString com = getComment( e.parentNode() );
 
-	if ( prop == "toolTip" && objClass != "QAction" && objClass != "QActionGroup" ) {
+	if ( prop == "toolTip" && objClass != "TQAction" && objClass != "TQActionGroup" ) {
 	    if ( !obj.isEmpty() )
-		trout << trindent << "QToolTip.add(self." << obj << ","
+		trout << trindent << "TQToolTip.add(self." << obj << ","
 		      << trcall( txt, com ) << ")" << endl;
 	    else
-		trout << trindent << "QToolTip.add(self,"
+		trout << trindent << "TQToolTip.add(self,"
 		      << trcall( txt, com ) << ")" << endl;
-	} else if ( prop == "whatsThis" && objClass != "QAction" && objClass != "QActionGroup" ) {
+	} else if ( prop == "whatsThis" && objClass != "TQAction" && objClass != "TQActionGroup" ) {
 	    if ( !obj.isEmpty() )
-		trout << trindent << "QWhatsThis.add(self." << obj << ","
+		trout << trindent << "TQWhatsThis.add(self." << obj << ","
 		      << trcall( txt, com ) << ")" << endl;
 	    else
-		trout << trindent << "QWhatsThis.add(self,"
+		trout << trindent << "TQWhatsThis.add(self,"
 		      << trcall( txt, com ) << ")" << endl;
 	} else {
 	    v = trcall( txt, com );
@@ -492,7 +492,7 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	if ( stdset )
 	    v = "%1";
 	else
-	    v = "QVariant(%1,0)";
+	    v = "TQVariant(%1,0)";
 	v = v.arg( mkBool( e.firstChild().toText().data() ) );
     } else if ( e.tagName() == "pixmap" ) {
 	v = e.firstChild().toText().data();
@@ -500,19 +500,19 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	    if ( pixmapLoaderFunction.isEmpty() ) {
 		v.prepend( "self." );
 	    } else {
-		v.prepend( pixmapLoaderFunction + "(" + QString( externPixmaps ? "\"" : "" ) );
-		v.append( QString( externPixmaps ? "\"" : "" ) + ")" );
+		v.prepend( pixmapLoaderFunction + "(" + TQString( externPixmaps ? "\"" : "" ) );
+		v.append( TQString( externPixmaps ? "\"" : "" ) + ")" );
 	    }
 	}
     } else if ( e.tagName() == "iconset" ) {
-	v = "QIconSet(%1)";
-	QString s = e.firstChild().toText().data();
+	v = "TQIconSet(%1)";
+	TQString s = e.firstChild().toText().data();
 	if ( !s.isEmpty() ) {
 	    if ( pixmapLoaderFunction.isEmpty() ) {
 		s.prepend( "self." );
 	    } else {
-		s.prepend( pixmapLoaderFunction + "(" + QString( externPixmaps ? "\"" : "" ) );
-		s.append( QString( externPixmaps ? "\"" : "" ) + ")" );
+		s.prepend( pixmapLoaderFunction + "(" + TQString( externPixmaps ? "\"" : "" ) );
+		s.append( TQString( externPixmaps ? "\"" : "" ) + ")" );
 	    }
 	}
 	v = v.arg( s );
@@ -520,16 +520,16 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	v = e.firstChild().toText().data() + ".convertToImage()";
     } else if ( e.tagName() == "enum" ) {
 	v = "%1.%2";
-	QString oc = objClass;
-	QString ev = e.firstChild().toText().data();
-	if ( oc == "QListView" && ev == "Manual" ) // #### workaround, rename QListView::Manual in 4.0
-	    oc = "QScrollView";
+	TQString oc = objClass;
+	TQString ev = e.firstChild().toText().data();
+	if ( oc == "TQListView" && ev == "Manual" ) // #### workaround, rename TQListView::Manual in 4.0
+	    oc = "TQScrollView";
 	v = v.arg( oc ).arg( ev );
     } else if ( e.tagName() == "set" ) {
-	QString keys( e.firstChild().toText().data() );
-	QStringList lst = QStringList::split( '|', keys );
+	TQString keys( e.firstChild().toText().data() );
+	TQStringList lst = TQStringList::split( '|', keys );
 	v = "";
-	QStringList::Iterator it = lst.begin();
+	TQStringList::Iterator it = lst.begin();
 	while ( it != lst.end() ) {
 	    v += objClass + "." + *it;
 	    if ( it != lst.fromLast() )
@@ -537,32 +537,32 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	    ++it;
 	}
     } else if ( e.tagName() == "sizepolicy" ) {
-	QDomElement n3 = e.firstChild().toElement();
-	QSizePolicy sp;
+	TQDomElement n3 = e.firstChild().toElement();
+	TQSizePolicy sp;
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "hsizetype" )
-		sp.setHorData( (QSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
+		sp.setHorData( (TQSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "vsizetype" )
-		sp.setVerData( (QSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
+		sp.setVerData( (TQSizePolicy::SizeType)n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "horstretch" )
 		sp.setHorStretch( n3.firstChild().toText().data().toInt() );
 	    else if ( n3.tagName() == "verstretch" )
 		sp.setVerStretch( n3.firstChild().toText().data().toInt() );
 	    n3 = n3.nextSibling().toElement();
 	}
-	QString tmp = "self.";
+	TQString tmp = "self.";
 	if ( !obj.isEmpty() )
 	    tmp += obj + ".";
-	v = "QSizePolicy(%1,%2,%3,%4," + tmp + "sizePolicy().hasHeightForWidth())";
+	v = "TQSizePolicy(%1,%2,%3,%4," + tmp + "sizePolicy().hasHeightForWidth())";
 	v = v.arg( mapSizeType(sp.horData()) ).arg( mapSizeType(sp.verData()) ).arg( sp.horStretch() ).arg( sp.verStretch() );
     } else if ( e.tagName() == "palette" ) {
-	QPalette pal;
+	TQPalette pal;
 	bool no_pixmaps = e.elementsByTagName( "pixmap" ).count() == 0;
-	QDomElement n;
+	TQDomElement n;
 	if ( no_pixmaps ) {
 	    n = e.firstChild().toElement();
 	    while ( !n.isNull() ) {
-		QColorGroup cg;
+		TQColorGroup cg;
 		if ( n.tagName() == "active" ) {
 		    cg = loadColorGroup( n );
 		    pal.setActive( cg );
@@ -576,19 +576,19 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		n = n.nextSibling().toElement();
 	    }
 	}
-	if ( no_pixmaps && pal == QPalette( pal.active().button(), pal.active().background() ) ) {
-	    v = "QPalette(QColor(%1,%2,%3),QColor(%1,%2,%3))";
+	if ( no_pixmaps && pal == TQPalette( pal.active().button(), pal.active().background() ) ) {
+	    v = "TQPalette(TQColor(%1,%2,%3),TQColor(%1,%2,%3))";
 	    v = v.arg( pal.active().button().red() ).arg( pal.active().button().green() ).arg( pal.active().button().blue() );
 	    v = v.arg( pal.active().background().red() ).arg( pal.active().background().green() ).arg( pal.active().background().blue() );
 	} else {
-	    QString palette = "pal";
+	    TQString palette = "pal";
 	    if ( !pal_used ) {
-		out << indent << palette << " = QPalette()" << endl;
+		out << indent << palette << " = TQPalette()" << endl;
 		pal_used = TRUE;
 	    }
-	    QString cg = "cg";
+	    TQString cg = "cg";
 	    if ( !cg_used ) {
-		out << indent << cg << " = QColorGroup()" << endl;
+		out << indent << cg << " = TQColorGroup()" << endl;
 		cg_used = TRUE;
 	    }
 	    n = e.firstChild().toElement();
@@ -611,10 +611,10 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 	    v = palette;
 	}
     } else if ( e.tagName() == "cursor" ) {
-	v = "QCursor(%1)";
+	v = "TQCursor(%1)";
 	v = v.arg( e.firstChild().toText().data() );
     } else if ( e.tagName() == "date" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int y, m, d;
 	y = m = d = 0;
 	while ( !n3.isNull() ) {
@@ -626,10 +626,10 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		d = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QDate(%1,%2,%3)";
+	v = "TQDate(%1,%2,%3)";
 	v = v.arg(y).arg(m).arg(d);
     } else if ( e.tagName() == "time" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int h, m, s;
 	h = m = s = 0;
 	while ( !n3.isNull() ) {
@@ -641,10 +641,10 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		s = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QTime(%1,%2,%3)";
+	v = "TQTime(%1,%2,%3)";
 	v = v.arg(h).arg(m).arg(s);
     } else if ( e.tagName() == "datetime" ) {
-	QDomElement n3 = e.firstChild().toElement();
+	TQDomElement n3 = e.firstChild().toElement();
 	int h, mi, s, y, mo, d;
 	h = mi = s = y = mo = d = 0;
 	while ( !n3.isNull() ) {
@@ -662,18 +662,18 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 		d = n3.firstChild().toText().data().toInt();
 	    n3 = n3.nextSibling().toElement();
 	}
-	v = "QDateTime(QDate(%1,%2,%3),QTime(%4,%5,%6))";
+	v = "TQDateTime(TQDate(%1,%2,%3),TQTime(%4,%5,%6))";
 	v = v.arg(y).arg(mo).arg(d).arg(h).arg(mi).arg(s);
     } else if ( e.tagName() == "stringlist" ) {
-	QStringList l;
-	QDomElement n3 = e.firstChild().toElement();
-	QString listname = "l";
+	TQStringList l;
+	TQDomElement n3 = e.firstChild().toElement();
+	TQString listname = "l";
 	if ( !obj.isEmpty() ) {
 	    listname = obj + "_stringlist";
 	    listname = registerObject( listname );
-	    out << indent << listname << " = QStringList()" << endl;
+	    out << indent << listname << " = TQStringList()" << endl;
 	} else {
-	    out << indent << listname << " = QStringList()" << endl;
+	    out << indent << listname << " = TQStringList()" << endl;
 	}
 	while ( !n3.isNull() ) {
 	    if ( n3.tagName() == "string" )
@@ -690,9 +690,9 @@ QString Uic::setObjectProperty( const QString& objClass, const QString& obj, con
 
 /*! Extracts a named object property from \a e.
  */
-QDomElement Uic::getObjectProperty( const QDomElement& e, const QString& name )
+TQDomElement Uic::getObjectProperty( const TQDomElement& e, const TQString& name )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement();
 	  !n.isNull();
 	  n = n.nextSibling().toElement() ) {
diff --git a/pyuic3/parser.cpp b/pyuic3/parser.cpp
index 4fc13c5..a4def26 100644
--- a/pyuic3/parser.cpp
+++ b/pyuic3/parser.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -22,25 +22,25 @@
 #include <qobject.h>
 #include <qstringlist.h>
 
-class NormalizeObject : public QObject
+class NormalizeObject : public TQObject
 {
 public:
-    NormalizeObject() : QObject() {}
-    static QCString normalizeSignalSlot( const char *signalSlot ) { return QObject::normalizeSignalSlot( signalSlot ); }
+    NormalizeObject() : TQObject() {}
+    static TQCString normalizeSignalSlot( const char *signalSlot ) { return TQObject::normalizeSignalSlot( signalSlot ); }
 };
 
-QString Parser::cleanArgs( const QString &func )
+TQString Parser::cleanArgs( const TQString &func )
 {
-    QString slot( func );
+    TQString slot( func );
     int begin = slot.find( "(" ) + 1;
-    QString args = slot.mid( begin );
+    TQString args = slot.mid( begin );
     args = args.left( args.find( ")" ) );
-    QStringList lst = QStringList::split( ',', args );
-    QString res = slot.left( begin );
-    for ( QStringList::Iterator it = lst.begin(); it != lst.end(); ++it ) {
+    TQStringList lst = TQStringList::split( ',', args );
+    TQString res = slot.left( begin );
+    for ( TQStringList::Iterator it = lst.begin(); it != lst.end(); ++it ) {
 	if ( it != lst.begin() )
 	    res += ",";
-	QString arg = *it;
+	TQString arg = *it;
 	int pos = 0;
 	if ( ( pos = arg.find( "&" ) ) != -1 ) {
 	    arg = arg.left( pos + 1 );
@@ -50,7 +50,7 @@ QString Parser::cleanArgs( const QString &func )
 	    arg = arg.simplifyWhiteSpace();
 	    if ( ( pos = arg.find( ':' ) ) != -1 )
 		arg = arg.left( pos ).simplifyWhiteSpace() + ":" + arg.mid( pos + 1 ).simplifyWhiteSpace();
-	    QStringList l = QStringList::split( ' ', arg );
+	    TQStringList l = TQStringList::split( ' ', arg );
 	    if ( l.count() == 2 ) {
 		if ( l[ 0 ] != "const" && l[ 0 ] != "unsigned" && l[ 0 ] != "var" )
 		    arg = l[ 0 ];
@@ -62,5 +62,5 @@ QString Parser::cleanArgs( const QString &func )
     }	
     res += ")";
 
-    return QString::fromLatin1( NormalizeObject::normalizeSignalSlot( res.latin1() ) );
+    return TQString::fromLatin1( NormalizeObject::normalizeSignalSlot( res.latin1() ) );
 }
diff --git a/pyuic3/parser.h b/pyuic3/parser.h
index 5a5671a..db07ea2 100644
--- a/pyuic3/parser.h
+++ b/pyuic3/parser.h
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -26,7 +26,7 @@
 class Parser
 {
 public:
-    static QString cleanArgs( const QString &func );
+    static TQString cleanArgs( const TQString &func );
 
 };
 
diff --git a/pyuic3/pyuic-prof.sbf b/pyuic3/pyuic-prof.sbf
index 2501349..c982fd1 100644
--- a/pyuic3/pyuic-prof.sbf
+++ b/pyuic3/pyuic-prof.sbf
@@ -1,22 +1,22 @@
-# This is the build file for pyuic for Qt v3 Professional Edition.
+# This is the build file for pyuic for TQt v3 Professional Edition.
 #
 # Copyright (c) 2007
 # 	Riverbank Computing Limited <info@riverbankcomputing.co.uk>
 # 
-# This file is part of PyQt.
+# This file is part of PyTQt.
 # 
-# This copy of PyQt is free software; you can redistribute it and/or modify it
+# This copy of PyTQt is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by the Free
 # Software Foundation; either version 2, or (at your option) any later
 # version.
 # 
-# PyQt is supplied in the hope that it will be useful, but WITHOUT ANY
+# PyTQt is supplied in the hope that it will be useful, but WITHOUT ANY
 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 # FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 # details.
 # 
 # You should have received a copy of the GNU General Public License along with
-# PyQt; see the file LICENSE.  If not, write to the Free Software Foundation,
+# PyTQt; see the file LICENSE.  If not, write to the Free Software Foundation,
 # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 
 target = pyuic
diff --git a/pyuic3/pyuic.pro.in b/pyuic3/pyuic.pro.in
index faebbd6..7b5b911 100644
--- a/pyuic3/pyuic.pro.in
+++ b/pyuic3/pyuic.pro.in
@@ -3,7 +3,7 @@
 # Copyright (c) 2002, 2003
 #	Riverbank Computing Limited <info@riverbankcomputing.co.uk>
 #
-# The project file for pyuic for Qt v3.
+# The project file for pyuic for TQt v3.
 
 
 TEMPLATE	= app
diff --git a/pyuic3/pyuic.sbf b/pyuic3/pyuic.sbf
index a40245d..d8fdccf 100644
--- a/pyuic3/pyuic.sbf
+++ b/pyuic3/pyuic.sbf
@@ -1,22 +1,22 @@
-# This is the build file for pyuic for Qt v3.
+# This is the build file for pyuic for TQt v3.
 #
 # Copyright (c) 2007
 # 	Riverbank Computing Limited <info@riverbankcomputing.co.uk>
 # 
-# This file is part of PyQt.
+# This file is part of PyTQt.
 # 
-# This copy of PyQt is free software; you can redistribute it and/or modify it
+# This copy of PyTQt is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by the Free
 # Software Foundation; either version 2, or (at your option) any later
 # version.
 # 
-# PyQt is supplied in the hope that it will be useful, but WITHOUT ANY
+# PyTQt is supplied in the hope that it will be useful, but WITHOUT ANY
 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 # FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 # details.
 # 
 # You should have received a copy of the GNU General Public License along with
-# PyQt; see the file LICENSE.  If not, write to the Free Software Foundation,
+# PyTQt; see the file LICENSE.  If not, write to the Free Software Foundation,
 # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 
 target = pyuic
diff --git a/pyuic3/subclassing.cpp b/pyuic3/subclassing.cpp
index 299e044..2d71cdd 100644
--- a/pyuic3/subclassing.cpp
+++ b/pyuic3/subclassing.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -38,17 +38,17 @@
 
   \sa createSubDecl()
  */
-void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
+void Uic::createSubImpl( const TQDomElement &e, const TQString& subClass )
 {
-    QDomElement n;
-    QDomNodeList nl;
+    TQDomElement n;
+    TQDomNodeList nl;
     int i;
 
-    QString objClass = getClassName( e );
+    TQString objClass = getClassName( e );
     if ( objClass.isEmpty() )
 	return;
 
-    QString supClsMod = fileName;
+    TQString supClsMod = fileName;
     int tail = supClsMod.findRev('.',-1);
     if (tail >= 0)
 	supClsMod.truncate(tail);
@@ -62,11 +62,11 @@ void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
     out << endl;
 
     // constructor
-    if ( objClass == "QDialog" || objClass == "QWizard" ) {
+    if ( objClass == "TQDialog" || objClass == "TQWizard" ) {
 	out << indent << "def __init__(self,parent = None,name = None,modal = 0,fl = 0):" << endl;
 	++indent;
 	out << indent << nameOfClass << ".__init__(self,parent,name,modal,fl)" << endl;
-    } else { // standard QWidget
+    } else { // standard TQWidget
 	out << indent << "def __init__(self,parent = None,name = None,fl = 0):" << endl;
 	++indent;
 	out << indent << nameOfClass << ".__init__(self,parent,name,fl)" << endl;
@@ -74,12 +74,12 @@ void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
     --indent;
 
     // find additional functions
-    QStringList publicSlots, protectedSlots, privateSlots;
-    QStringList publicSlotTypes, protectedSlotTypes, privateSlotTypes;
-    QStringList publicSlotSpecifier, protectedSlotSpecifier, privateSlotSpecifier;
-    QStringList publicFuncts, protectedFuncts, privateFuncts;
-    QStringList publicFunctRetTyp, protectedFunctRetTyp, privateFunctRetTyp;
-    QStringList publicFunctSpec, protectedFunctSpec, privateFunctSpec;
+    TQStringList publicSlots, protectedSlots, privateSlots;
+    TQStringList publicSlotTypes, protectedSlotTypes, privateSlotTypes;
+    TQStringList publicSlotSpecifier, protectedSlotSpecifier, privateSlotSpecifier;
+    TQStringList publicFuncts, protectedFuncts, privateFuncts;
+    TQStringList publicFunctRetTyp, protectedFunctRetTyp, privateFunctRetTyp;
+    TQStringList publicFunctSpec, protectedFunctSpec, privateFunctSpec;
 
     nl = e.parentNode().toElement().elementsByTagName( "slot" );
     for ( i = 0; i < (int) nl.length(); i++ ) {
@@ -89,12 +89,12 @@ void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
 	    continue;
 	if ( n.attribute( "language", "C++" ) != "C++" )
 	    continue;
-	QString returnType = n.attribute( "returnType", "void" );
-	QString functionName = n.firstChild().toText().data().stripWhiteSpace();
+	TQString returnType = n.attribute( "returnType", "void" );
+	TQString functionName = n.firstChild().toText().data().stripWhiteSpace();
 	if ( functionName.endsWith( ";" ) )
 	    functionName = functionName.left( functionName.length() - 1 );
-	QString specifier = n.attribute( "specifier" );
-	QString access = n.attribute( "access" );
+	TQString specifier = n.attribute( "specifier" );
+	TQString access = n.attribute( "access" );
 	if ( access == "protected" ) {
 	    protectedSlots += functionName;
 	    protectedSlotTypes += returnType;
@@ -117,12 +117,12 @@ void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
             continue;
         if ( n.attribute( "language", "C++" ) != "C++" )
             continue;
-        QString returnType = n.attribute( "returnType", "void" );
-        QString functionName = n.firstChild().toText().data().stripWhiteSpace();
+        TQString returnType = n.attribute( "returnType", "void" );
+        TQString functionName = n.firstChild().toText().data().stripWhiteSpace();
         if ( functionName.endsWith( ";" ) )
             functionName = functionName.left( functionName.length() - 1 );
-        QString specifier = n.attribute( "specifier" );
-        QString access = n.attribute( "access" );
+        TQString specifier = n.attribute( "specifier" );
+        TQString access = n.attribute( "access" );
         if ( access == "protected" ) {
             protectedFuncts += functionName;
             protectedFunctRetTyp += returnType;
@@ -162,13 +162,13 @@ void Uic::createSubImpl( const QDomElement &e, const QString& subClass )
     --indent;
 }
 
-void Uic::writeFunctionsSubImpl( const QStringList &fuLst, const QStringList &typLst, const QStringList &specLst,
-                                 const QString &subClass, const QString &descr )
+void Uic::writeFunctionsSubImpl( const TQStringList &fuLst, const TQStringList &typLst, const TQStringList &specLst,
+                                 const TQString &subClass, const TQString &descr )
 {
-    QValueListConstIterator<QString> it, it2, it3;
+    TQValueListConstIterator<TQString> it, it2, it3;
     for ( it = fuLst.begin(), it2 = typLst.begin(), it3 = specLst.begin();
           it != fuLst.end(); ++it, ++it2, ++it3 ) {
-        QString type = *it2;
+        TQString type = *it2;
         if ( type.isEmpty() )
             type = "void";
         if ( *it3 == "non virtual" )
diff --git a/pyuic3/uic.cpp b/pyuic3/uic.cpp
index d359302..f227ccd 100644
--- a/pyuic3/uic.cpp
+++ b/pyuic3/uic.cpp
@@ -2,7 +2,7 @@
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 ** Copyright (c) 2004 Phil Thompson <phil@riverbankcomputing.co.uk>
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -52,36 +52,36 @@ void PyIndent::calc()
 }
 
 
-QString Uic::getComment( const QDomNode& n )
+TQString Uic::getComment( const TQDomNode& n )
 {
-    QDomNode child = n.firstChild();
+    TQDomNode child = n.firstChild();
     while ( !child.isNull() ) {
 	if ( child.toElement().tagName() == "comment" )
 	    return child.toElement().firstChild().toText().data();
 	child = child.nextSibling();
     }
-    return QString::null;
+    return TQString::null;
 }
 
-QString Uic::mkBool( bool b )
+TQString Uic::mkBool( bool b )
 {
     return b? "1" : "0";
 }
 
-QString Uic::mkBool( const QString& s )
+TQString Uic::mkBool( const TQString& s )
 {
     return mkBool( s == "true" || s == "1" );
 }
 
-bool Uic::toBool( const QString& s )
+bool Uic::toBool( const TQString& s )
 {
     return s == "true" || s.toInt() != 0;
 }
 
-QString Uic::fixString( const QString &str, bool encode )
+TQString Uic::fixString( const TQString &str, bool encode )
 {
 #if QT_VERSION >= 0x030100
-    QString s;
+    TQString s;
     if ( !encode ) {
 	s = str;
 	s.replace( "\\", "\\\\" );
@@ -89,7 +89,7 @@ QString Uic::fixString( const QString &str, bool encode )
 	s.replace( "\r", "" );
 	s.replace( "\n", "\\n\"\n\"" );
     } else {
-	QCString utf8 = str.utf8();
+	TQCString utf8 = str.utf8();
 	const int l = utf8.length();
 
 	for ( int i = 0; i < l; ++i ) {
@@ -101,25 +101,25 @@ QString Uic::fixString( const QString &str, bool encode )
 		if (ch <= 0x0f)
 		    s += "0";
 
-		s += QString::number( ch, 16 );
+		s += TQString::number( ch, 16 );
 	    }
 	}
     }
 #else
-    QString s( str );
-    s.replace( QRegExp( "\\\\" ), "\\\\" );
-    s.replace( QRegExp( "\"" ), "\\\"" );
-    s.replace( QRegExp( "\r?\n" ), "\\n\"\n\"" );
+    TQString s( str );
+    s.replace( TQRegExp( "\\\\" ), "\\\\" );
+    s.replace( TQRegExp( "\"" ), "\\\"" );
+    s.replace( TQRegExp( "\r?\n" ), "\\n\"\n\"" );
 #endif
     return "\"" + s + "\"";
 }
 
-QString Uic::trcall( const QString& sourceText, const QString& comment )
+TQString Uic::trcall( const TQString& sourceText, const TQString& comment )
 {
     if ( sourceText.isEmpty() && comment.isEmpty() )
-        return "QString.null";
+        return "TQString.null";
 
-    QString t = trmacro;
+    TQString t = trmacro;
     bool encode = FALSE;
     if ( t.isNull() ) {
         t = "self.__tr";
@@ -145,9 +145,9 @@ QString Uic::trcall( const QString& sourceText, const QString& comment )
     }
 }
 
-QString Uic::mkStdSet( const QString& prop )
+TQString Uic::mkStdSet( const TQString& prop )
 {
-    return QString( "set" ) + prop[0].upper() + prop.mid(1);
+    return TQString( "set" ) + prop[0].upper() + prop.mid(1);
 }
 
 
@@ -158,9 +158,9 @@ QString Uic::mkStdSet( const QString& prop )
 
   The class Uic encapsulates the user interface compiler (uic).
  */
-Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
-	  QDomDocument doc, bool subcl, const QString &trm,
-	  const QString& subClass, QString &uicClass )
+Uic::Uic( const TQString &fn, const char *outputFn, TQTextStream &outStream,
+	  TQDomDocument doc, bool subcl, const TQString &trm,
+	  const TQString& subClass, TQString &uicClass )
     : out( outStream ), trout (&languageChangeBody ),
       outputFileName( outputFn ), trmacro( trm ),
       pyNeedTr(FALSE), pyNeedTrUtf8(FALSE)
@@ -191,14 +191,14 @@ Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
         return;
 
     // Extract any Python code in the comments.
-    QStringList comm = QStringList::split('\n',getComment(doc.firstChild()));
+    TQStringList comm = TQStringList::split('\n',getComment(doc.firstChild()));
 
-    for (QStringList::Iterator it = comm.begin(); it != comm.end(); ++it)
+    for (TQStringList::Iterator it = comm.begin(); it != comm.end(); ++it)
 	if ((*it).startsWith("Python:"))
 	    pyCode += (*it).mid(7) + "\n";
 
-    QDomElement e = doc.firstChild().firstChild().toElement();
-    QDomElement widget;
+    TQDomElement e = doc.firstChild().firstChild().toElement();
+    TQDomElement widget;
     while ( !e.isNull() ) {
 	if ( e.tagName() == "widget" ) {
 	    widget = e;
@@ -213,13 +213,13 @@ Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
             bool ok;
             defSpacing.toInt( &ok );
             if ( !ok ) {
-                QString buf = defSpacing.toString();
+                TQString buf = defSpacing.toString();
                 defSpacing = buf.append( "()" );
             }
             defMargin = e.attribute( "margin", defMargin.toString() );
             defMargin.toInt( &ok );
             if ( !ok ) {
-                QString buf = defMargin.toString();
+                TQString buf = defMargin.toString();
                 defMargin = buf.append( "()" );
             }
 	}
@@ -232,7 +232,7 @@ Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
 
     uicClass = nameOfClass;
 
-    namespaces = QStringList::split( "::", nameOfClass );
+    namespaces = TQStringList::split( "::", nameOfClass );
     bareNameOfClass = namespaces.last();
     namespaces.remove( namespaces.fromLast() );
 
@@ -258,7 +258,7 @@ Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
 	out << "\n";
 	out << indent << "def __trUtf8(self,s,c = None):\n";
 	++indent;
-	out << indent << "return qApp.translate(\"" << nameOfClass << "\",s,c,QApplication.UnicodeUTF8)\n";
+	out << indent << "return qApp.translate(\"" << nameOfClass << "\",s,c,TQApplication.UnicodeUTF8)\n";
 	--indent;
     }
 
@@ -267,26 +267,26 @@ Uic::Uic( const QString &fn, const char *outputFn, QTextStream &outStream,
 
 /*! Extracts a pixmap loader function from \a e
  */
-QString Uic::getPixmapLoaderFunction( const QDomElement& e )
+TQString Uic::getPixmapLoaderFunction( const TQDomElement& e )
 {
-    QDomElement n;
+    TQDomElement n;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "pixmapfunction" )
 	    return n.firstChild().toText().data();
     }
-    return QString::null;
+    return TQString::null;
 }
 
 
 /*! Extracts the forms class name from \a e
  */
-QString Uic::getFormClassName( const QDomElement& e )
+TQString Uic::getFormClassName( const TQDomElement& e )
 {
-    QDomElement n;
-    QString cn;
+    TQDomElement n;
+    TQString cn;
     for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "class" ) {
-	    QString s = n.firstChild().toText().data();
+	    TQString s = n.firstChild().toText().data();
 	    int i;
 	    while ( ( i = s.find(' ' )) != -1 )
 		s[i] = '_';
@@ -298,24 +298,24 @@ QString Uic::getFormClassName( const QDomElement& e )
 
 /*! Extracts a class name from \a e.
  */
-QString Uic::getClassName( const QDomElement& e )
+TQString Uic::getClassName( const TQDomElement& e )
 {
-    QString s = e.attribute( "class" );
+    TQString s = e.attribute( "class" );
     if ( s.isEmpty() && e.tagName() == "toolbar" )
-	s = "QToolBar";
+	s = "TQToolBar";
     else if ( s.isEmpty() && e.tagName() == "menubar" )
-	s = "QMenuBar";
+	s = "TQMenuBar";
     return s;
 }
 
 /*! Returns TRUE if database framework code is generated, else FALSE.
 */
 
-bool Uic::isFrameworkCodeGenerated( const QDomElement& e )
+bool Uic::isFrameworkCodeGenerated( const TQDomElement& e )
 {
-    QDomElement n = getObjectProperty( e, "frameworkCode" );
+    TQDomElement n = getObjectProperty( e, "frameworkCode" );
     if ( n.attribute("name") == "frameworkCode" &&
-	 !DomTool::elementToVariant( n.firstChild().toElement(), QVariant( TRUE, 0 ) ).toBool() )
+	 !DomTool::elementToVariant( n.firstChild().toElement(), TQVariant( TRUE, 0 ) ).toBool() )
 	return FALSE;
     return TRUE;
 }
@@ -323,38 +323,38 @@ bool Uic::isFrameworkCodeGenerated( const QDomElement& e )
 /*! Extracts an object name from \a e. It's stored in the 'name'
  property.
  */
-QString Uic::getObjectName( const QDomElement& e )
+TQString Uic::getObjectName( const TQDomElement& e )
 {
-    QDomElement n = getObjectProperty( e, "name" );
+    TQDomElement n = getObjectProperty( e, "name" );
     if ( n.firstChild().toElement().tagName() == "cstring" )
 	return n.firstChild().toElement().firstChild().toText().data();
-    return QString::null;
+    return TQString::null;
 }
 
 /*! Extracts an layout name from \a e. It's stored in the 'name'
- property of the preceeding sibling (the first child of a QLayoutWidget).
+ property of the preceeding sibling (the first child of a TQLayoutWidget).
  */
-QString Uic::getLayoutName( const QDomElement& e )
+TQString Uic::getLayoutName( const TQDomElement& e )
 {
-    QDomElement p = e.parentNode().toElement();
-    QString name;
+    TQDomElement p = e.parentNode().toElement();
+    TQString name;
 
-    if ( getClassName(p) != "QLayoutWidget" )
+    if ( getClassName(p) != "TQLayoutWidget" )
 	name = "Layout";
 
-    QDomElement n = getObjectProperty( p, "name" );
+    TQDomElement n = getObjectProperty( p, "name" );
     if ( n.firstChild().toElement().tagName() == "cstring" ) {
         name.prepend( n.firstChild().toElement().firstChild().toText().data() );
-        return QStringList::split( "::", name ).last();
+        return TQStringList::split( "::", name ).last();
     }
     return e.tagName();
 }
 
 
-QString Uic::getDatabaseInfo( const QDomElement& e, const QString& tag )
+TQString Uic::getDatabaseInfo( const TQDomElement& e, const TQString& tag )
 {
-    QDomElement n;
-    QDomElement n1;
+    TQDomElement n;
+    TQDomElement n1;
     int child = 0;
     // database info is a stringlist stored in this order
     if ( tag == "connection" )
@@ -364,65 +364,65 @@ QString Uic::getDatabaseInfo( const QDomElement& e, const QString& tag )
     else if ( tag == "field" )
 	child = 2;
     else
-	return QString::null;
+	return TQString::null;
     n = getObjectProperty( e, "database" );
     if ( n.firstChild().toElement().tagName() == "stringlist" ) {
 	    // find correct stringlist entry
-	    QDomElement n1 = n.firstChild().firstChild().toElement();
+	    TQDomElement n1 = n.firstChild().firstChild().toElement();
 	    for ( int i = 0; i < child && !n1.isNull(); ++i )
 		n1 = n1.nextSibling().toElement();
 	    if ( n1.isNull() )
-		return QString::null;
+		return TQString::null;
 	    return n1.firstChild().toText().data();
     }
-    return QString::null;
+    return TQString::null;
 }
 
 
 /*!
   Returns include file for class \a className or a null string.
  */
-QString Uic::getInclude( const QString& className )
+TQString Uic::getInclude( const TQString& className )
 {
     int wid = WidgetDatabase::idFromClassName( className );
     if ( wid != -1 )
 	return WidgetDatabase::includeFile( wid );
-    return QString::null;
+    return TQString::null;
 }
 
 
-void Uic::createActionImpl( const QDomElement &n, const QString &parent )
+void Uic::createActionImpl( const TQDomElement &n, const TQString &parent )
 {
-    for ( QDomElement ae = n; !ae.isNull(); ae = ae.nextSibling().toElement() ) {
-	QString objName = registerObject( getObjectName( ae ) );
+    for ( TQDomElement ae = n; !ae.isNull(); ae = ae.nextSibling().toElement() ) {
+	TQString objName = registerObject( getObjectName( ae ) );
 	if ( ae.tagName() == "action" )
-	    out << indent << "self." << objName << " = QAction(" << parent << ",\"" << objName << "\")" << endl;
+	    out << indent << "self." << objName << " = TQAction(" << parent << ",\"" << objName << "\")" << endl;
 	else if ( ae.tagName() == "actiongroup" )
-	    out << indent << "self." << objName << " = QActionGroup(" << parent << ",\"" << objName << "\")" << endl;
+	    out << indent << "self." << objName << " = TQActionGroup(" << parent << ",\"" << objName << "\")" << endl;
 	else
 	    continue;
 	bool subActionsDone = FALSE;
 #if QT_VERSION >= 0x030300
 	bool hasMenuText = FALSE;
-	QString actionText;
+	TQString actionText;
 #endif
-	for ( QDomElement n2 = ae.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
+	for ( TQDomElement n2 = ae.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
 	    if ( n2.tagName() == "property" ) {
 		bool stdset = stdsetdef;
 		if ( n2.hasAttribute( "stdset" ) )
 		    stdset = toBool( n2.attribute( "stdset" ) );
-		QString prop = n2.attribute("name");
+		TQString prop = n2.attribute("name");
 		if ( prop == "name" )
 		    continue;
-		QString value = setObjectProperty( "QAction", objName, prop, n2.firstChild().toElement(), stdset );
+		TQString value = setObjectProperty( "TQAction", objName, prop, n2.firstChild().toElement(), stdset );
 		if ( value.isEmpty() )
 		    continue;
 
-		QString call = "self." + objName + ".";
+		TQString call = "self." + objName + ".";
 		if ( stdset )
 		    call += mkStdSet( prop ) + "(" + value + ")";
 		else
-		    call += "setProperty(\"" + prop + "\",QVariant(" + value + "))";
+		    call += "setProperty(\"" + prop + "\",TQVariant(" + value + "))";
 
 #if QT_VERSION >= 0x030300
 		if (prop == "menuText")
@@ -442,53 +442,53 @@ void Uic::createActionImpl( const QDomElement &n, const QString &parent )
 	    }
 	}
 #if QT_VERSION >= 0x030300
-	// workaround for loading pre-3.3 files expecting bogus QAction behavior
+	// workaround for loading pre-3.3 files expecting bogus TQAction behavior
 	if (!hasMenuText && !actionText.isEmpty() && uiFileVersion < "3.3")
 	    trout << indent << "self." << objName << ".setMenuText(" << actionText << ")" << endl;
 #endif
     }
 }
 
-QString get_dock( const QString &d )
+TQString get_dock( const TQString &d )
 {
     if ( d == "0" )
-	return "Qt.DockUnmanaged";
+	return "TQt.DockUnmanaged";
     if ( d == "1" )
-	return "Qt.DockTornOff";
+	return "TQt.DockTornOff";
     if ( d == "2" )
-	return "Qt.DockTop";
+	return "TQt.DockTop";
     if ( d == "3" )
-	return "Qt.DockBottom";
+	return "TQt.DockBottom";
     if ( d == "4" )
-	return "Qt.DockRight";
+	return "TQt.DockRight";
     if ( d == "5" )
-	return "Qt.DockLeft";
+	return "TQt.DockLeft";
     if ( d == "6" )
-	return "Qt.DockMinimized";
+	return "TQt.DockMinimized";
     return "";
 }
 
-void Uic::createToolbarImpl( const QDomElement &n, const QString &parentClass, const QString &parent )
+void Uic::createToolbarImpl( const TQDomElement &n, const TQString &parentClass, const TQString &parent )
 {
-    QDomNodeList nl = n.elementsByTagName( "toolbar" );
+    TQDomNodeList nl = n.elementsByTagName( "toolbar" );
     for ( int i = 0; i < (int) nl.length(); i++ ) {
-	QDomElement ae = nl.item( i ).toElement();
-	QString dock = get_dock( ae.attribute( "dock" ) );
-	QString objName = getObjectName( ae );
- 	out << indent << "self." << objName << " = QToolBar(QString(\"\"),self," << dock << ")" << endl;
+	TQDomElement ae = nl.item( i ).toElement();
+	TQString dock = get_dock( ae.attribute( "dock" ) );
+	TQString objName = getObjectName( ae );
+ 	out << indent << "self." << objName << " = TQToolBar(TQString(\"\"),self," << dock << ")" << endl;
 	createObjectImpl( ae, parentClass, parent );
-	for ( QDomElement n2 = ae.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
+	for ( TQDomElement n2 = ae.firstChild().toElement(); !n2.isNull(); n2 = n2.nextSibling().toElement() ) {
 	    if ( n2.tagName() == "action" ) {
 		out << indent << "self." << n2.attribute( "name" ) << ".addTo(self." << objName << ")" << endl;
 	    } else if ( n2.tagName() == "separator" ) {
 		out << indent << "self." << objName << ".addSeparator()" << endl;
 	    } else if ( n2.tagName() == "widget" ) {
 		if ( n2.attribute( "class" ) != "Spacer" ) {
-			createObjectImpl( n2, "QToolBar", "self." + objName );
+			createObjectImpl( n2, "TQToolBar", "self." + objName );
 		} else {
-		    QString child = createSpacerImpl( n2, parentClass, parent, objName );
-		    out << indent << "QApplication.sendPostedEvents(self." << objName
-			<< ",QEvent.ChildInserted)" << endl;
+		    TQString child = createSpacerImpl( n2, parentClass, parent, objName );
+		    out << indent << "TQApplication.sendPostedEvents(self." << objName
+			<< ",TQEvent.ChildInserted)" << endl;
 		    out << indent << "self." << objName << ".boxLayout().addItem(" << child << ")" << endl;
 		}
 	    }
@@ -496,22 +496,22 @@ void Uic::createToolbarImpl( const QDomElement &n, const QString &parentClass, c
     }
 }
 
-void Uic::createMenuBarImpl( const QDomElement &n, const QString &parentClass, const QString &parent )
+void Uic::createMenuBarImpl( const TQDomElement &n, const TQString &parentClass, const TQString &parent )
 {
-    QString objName = getObjectName( n );
-    out << indent << "self." << objName << " = QMenuBar(self,\"" << objName << "\")" << endl;
+    TQString objName = getObjectName( n );
+    out << indent << "self." << objName << " = TQMenuBar(self,\"" << objName << "\")" << endl;
     createObjectImpl( n, parentClass, parent );
 
     int i = 0;
-    QDomElement c = n.firstChild().toElement();
+    TQDomElement c = n.firstChild().toElement();
     while ( !c.isNull() ) {
 	if ( c.tagName() == "item" ) {
-	    QString itemName = "self." + c.attribute( "name" );
+	    TQString itemName = "self." + c.attribute( "name" );
 	    out << endl;
-	    out << indent << itemName << " = QPopupMenu(self)" << endl;
+	    out << indent << itemName << " = TQPopupMenu(self)" << endl;
 	    createPopupMenuImpl( c, parentClass, itemName );
-	    out << indent << "self." << objName << ".insertItem(QString(\"\")," << itemName << "," << i << ")" << endl;
-	    QString findItem("self." + objName + ".findItem(%1)");
+	    out << indent << "self." << objName << ".insertItem(TQString(\"\")," << itemName << "," << i << ")" << endl;
+	    TQString findItem("self." + objName + ".findItem(%1)");
 	    findItem = findItem.arg(i);
 	    trout << indent << "if " << findItem << ":" << endl;
 	    ++indent;
@@ -526,16 +526,16 @@ void Uic::createMenuBarImpl( const QDomElement &n, const QString &parentClass, c
     }
 }
 
-void Uic::createPopupMenuImpl( const QDomElement &e, const QString &parentClass, const QString &parent )
+void Uic::createPopupMenuImpl( const TQDomElement &e, const TQString &parentClass, const TQString &parent )
 {
     int i = 0;
-    for ( QDomElement n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
+    for ( TQDomElement n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	if ( n.tagName() == "action" || n.tagName() == "actiongroup" ) {
-	    QDomElement n2 = n.nextSibling().toElement();
+	    TQDomElement n2 = n.nextSibling().toElement();
 	    if ( n2.tagName() == "item" ) { // the action has a sub menu
-		QString itemName = "self." + n2.attribute( "name" );
-		QString itemText = n2.attribute( "text" );
-		out << indent << itemName << " = QPopupMenu(self)" << endl;
+		TQString itemName = "self." + n2.attribute( "name" );
+		TQString itemText = n2.attribute( "text" );
+		out << indent << itemName << " = TQPopupMenu(self)" << endl;
 		out << indent << parent << ".setAccel(" << trcall( n2.attribute( "accel" ) ) << ",";
 		out << parent << ".insertItem(" << "self." << n.attribute( "name" ) << ".iconSet(),";
 		out << trcall( itemText ) << "," << itemName << "))" << endl;
@@ -557,17 +557,17 @@ void Uic::createPopupMenuImpl( const QDomElement &e, const QString &parentClass,
   Creates implementation of an listbox item tag.
 */
 
-QString Uic::createListBoxItemImpl( const QDomElement &e, const QString &parent ,
-				    QString *value )
+TQString Uic::createListBoxItemImpl( const TQDomElement &e, const TQString &parent ,
+				    TQString *value )
 {
-    QDomElement n = e.firstChild().toElement();
-    QString txt;
-    QString com;
-    QString pix;
+    TQDomElement n = e.firstChild().toElement();
+    TQString txt;
+    TQString com;
+    TQString pix;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "property" ) {
-	    QString attrib = n.attribute( "name" );
-	    QVariant v = DomTool::elementToVariant( n.firstChild().toElement(), QVariant() );
+	    TQString attrib = n.attribute( "name" );
+	    TQVariant v = DomTool::elementToVariant( n.firstChild().toElement(), TQVariant() );
 	    if ( attrib == "text" ) {
 		txt = v.toString();
 		com = getComment( n );
@@ -577,8 +577,8 @@ QString Uic::createListBoxItemImpl( const QDomElement &e, const QString &parent
 		    if ( pixmapLoaderFunction.isEmpty() ) {
 		        pix.prepend( "self." );
 		    } else {
-		        pix.prepend( pixmapLoaderFunction + "( " + QString( externPixmaps ? "\"" : "self." ) );
-		        pix.append(  QString( externPixmaps ? "\"" : "" ) + ")" );
+		        pix.prepend( pixmapLoaderFunction + "( " + TQString( externPixmaps ? "\"" : "self." ) );
+		        pix.append(  TQString( externPixmaps ? "\"" : "" ) + ")" );
 		    }
 		}
 	    }
@@ -599,16 +599,16 @@ QString Uic::createListBoxItemImpl( const QDomElement &e, const QString &parent
   Creates implementation of an iconview item tag.
 */
 
-QString Uic::createIconViewItemImpl( const QDomElement &e, const QString &parent )
+TQString Uic::createIconViewItemImpl( const TQDomElement &e, const TQString &parent )
 {
-    QDomElement n = e.firstChild().toElement();
-    QString txt;
-    QString com;
-    QString pix;
+    TQDomElement n = e.firstChild().toElement();
+    TQString txt;
+    TQString com;
+    TQString pix;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "property" ) {
-	    QString attrib = n.attribute( "name" );
-	    QVariant v = DomTool::elementToVariant( n.firstChild().toElement(), QVariant() );
+	    TQString attrib = n.attribute( "name" );
+	    TQVariant v = DomTool::elementToVariant( n.firstChild().toElement(), TQVariant() );
 	    if ( attrib == "text" ) {
 		txt = v.toString();
 		com = getComment( n );
@@ -618,8 +618,8 @@ QString Uic::createIconViewItemImpl( const QDomElement &e, const QString &parent
 		    if ( pixmapLoaderFunction.isEmpty() ) {
 		        pix.prepend( "self." );
 		    } else {
-		        pix.prepend( pixmapLoaderFunction + "( " + QString( externPixmaps ? "\"" : "self." ) );
-		        pix.append(  QString( externPixmaps ? "\"" : "" ) + ")" );
+		        pix.prepend( pixmapLoaderFunction + "( " + TQString( externPixmaps ? "\"" : "self." ) );
+		        pix.append(  TQString( externPixmaps ? "\"" : "" ) + ")" );
 		    }
 		}
 	    }
@@ -628,24 +628,24 @@ QString Uic::createIconViewItemImpl( const QDomElement &e, const QString &parent
     }
 
     if ( pix.isEmpty() )
-	return "QIconViewItem(" + parent + "," + trcall( txt, com ) + ")";
+	return "TQIconViewItem(" + parent + "," + trcall( txt, com ) + ")";
     else
-	return "QIconViewItem(" + parent + "," + trcall( txt, com ) + "," + pix + ")";
+	return "TQIconViewItem(" + parent + "," + trcall( txt, com ) + "," + pix + ")";
 }
 
 /*!
   Creates implementation of an listview item tag.
 */
 
-QString Uic::createListViewItemImpl( const QDomElement &e, const QString &parent,
-				     const QString &parentItem )
+TQString Uic::createListViewItemImpl( const TQDomElement &e, const TQString &parent,
+				     const TQString &parentItem )
 {
-    QString s;
+    TQString s;
 
-    QDomElement n = e.firstChild().toElement();
+    TQDomElement n = e.firstChild().toElement();
 
     bool hasChildren = e.elementsByTagName( "item" ).count() > 0;
-    QString item;
+    TQString item;
 
     if ( hasChildren ) {
 	item = registerObject( "item" );
@@ -656,26 +656,26 @@ QString Uic::createListViewItemImpl( const QDomElement &e, const QString &parent
     s = trindent + item + " = ";
 
     if ( !parentItem.isEmpty() )
-	s += "QListViewItem(" + parentItem + "," + lastItem + ")\n";
+	s += "TQListViewItem(" + parentItem + "," + lastItem + ")\n";
     else
-	s += "QListViewItem(" + parent + "," + lastItem + ")\n";
+	s += "TQListViewItem(" + parent + "," + lastItem + ")\n";
 
-    QStringList texts;
-    QStringList pixmaps;
+    TQStringList texts;
+    TQStringList pixmaps;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "property" ) {
-	    QString attrib = n.attribute("name");
-	    QVariant v = DomTool::elementToVariant( n.firstChild().toElement(), QVariant() );
+	    TQString attrib = n.attribute("name");
+	    TQVariant v = DomTool::elementToVariant( n.firstChild().toElement(), TQVariant() );
 	    if ( attrib == "text" )
 		texts << v.toString();
 	    else if ( attrib == "pixmap" ) {
-		QString pix = v.toString();
+		TQString pix = v.toString();
 		if ( !pix.isEmpty() ) {
 		    if ( pixmapLoaderFunction.isEmpty() ) {
 		        pix.prepend( "self." );
 		    } else {
-		        pix.prepend( pixmapLoaderFunction + "( " + QString( externPixmaps ? "\"" : "self." ) );
-		        pix.append(  QString( externPixmaps ? "\"" : "" ) + ")" );
+		        pix.prepend( pixmapLoaderFunction + "( " + TQString( externPixmaps ? "\"" : "self." ) );
+		        pix.append(  TQString( externPixmaps ? "\"" : "" ) + ")" );
 		    }
 		}
 		pixmaps << pix;
@@ -689,9 +689,9 @@ QString Uic::createListViewItemImpl( const QDomElement &e, const QString &parent
 
     for ( int i = 0; i < (int)texts.count(); ++i ) {
 	if ( !texts[ i ].isEmpty() )
-	    s += trindent + item + ".setText(" + QString::number( i ) + "," + trcall( texts[ i ] ) + ")\n";
+	    s += trindent + item + ".setText(" + TQString::number( i ) + "," + trcall( texts[ i ] ) + ")\n";
 	if ( !pixmaps[ i ].isEmpty() )
-	    s += trindent + item + ".setPixmap(" + QString::number( i ) + "," + pixmaps[ i ] + ")\n";
+	    s += trindent + item + ".setPixmap(" + TQString::number( i ) + "," + pixmaps[ i ] + ")\n";
     }
 
     lastItem = item;
@@ -702,18 +702,18 @@ QString Uic::createListViewItemImpl( const QDomElement &e, const QString &parent
   Creates implementation of an listview column tag.
 */
 
-QString Uic::createListViewColumnImpl( const QDomElement &e, const QString &parent,
-				       QString *value )
+TQString Uic::createListViewColumnImpl( const TQDomElement &e, const TQString &parent,
+				       TQString *value )
 {
-    QDomElement n = e.firstChild().toElement();
-    QString txt;
-    QString com;
-    QString pix;
+    TQDomElement n = e.firstChild().toElement();
+    TQString txt;
+    TQString com;
+    TQString pix;
     bool clickable = FALSE, resizable = FALSE;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "property" ) {
-	    QString attrib = n.attribute("name");
-	    QVariant v = DomTool::elementToVariant( n.firstChild().toElement(), QVariant() );
+	    TQString attrib = n.attribute("name");
+	    TQVariant v = DomTool::elementToVariant( n.firstChild().toElement(), TQVariant() );
 	    if ( attrib == "text" ) {
 		txt = v.toString();
 		com = getComment( n );
@@ -723,8 +723,8 @@ QString Uic::createListViewColumnImpl( const QDomElement &e, const QString &pare
 		    if ( pixmapLoaderFunction.isEmpty() ) {
 		        pix.prepend( "self." );
 		    } else {
-		        pix.prepend( pixmapLoaderFunction + "( " + QString( externPixmaps ? "\"" : "self." ) );
-		        pix.append(  QString( externPixmaps ? "\"" : "" ) + ")" );
+		        pix.prepend( pixmapLoaderFunction + "( " + TQString( externPixmaps ? "\"" : "self." ) );
+		        pix.append(  TQString( externPixmaps ? "\"" : "" ) + ")" );
 		    }
 		}
 	    } else if ( attrib == "clickable" )
@@ -738,10 +738,10 @@ QString Uic::createListViewColumnImpl( const QDomElement &e, const QString &pare
     if ( value )
         *value = trcall( txt, com );
 
-    QString s;
+    TQString s;
     s = indent + parent + ".addColumn(" + trcall( txt, com ) + ")\n";
     if ( !pix.isEmpty() )
-	s += indent + parent + ".header().setLabel(" + parent + ".header().count() - 1,QIconSet(" + pix + ")," + trcall( txt, com ) + ")\n";
+	s += indent + parent + ".header().setLabel(" + parent + ".header().count() - 1,TQIconSet(" + pix + ")," + trcall( txt, com ) + ")\n";
     if ( !clickable )
 	s += indent + parent + ".header().setClickEnabled(0," + parent + ".header().count() - 1)\n";
     if ( !resizable )
@@ -749,20 +749,20 @@ QString Uic::createListViewColumnImpl( const QDomElement &e, const QString &pare
     return s;
 }
 
-QString Uic::createTableRowColumnImpl( const QDomElement &e, const QString &parent,
-				       QString *value )
+TQString Uic::createTableRowColumnImpl( const TQDomElement &e, const TQString &parent,
+				       TQString *value )
 {
-    QString objClass = getClassName( e.parentNode().toElement() );
-    QDomElement n = e.firstChild().toElement();
-    QString txt;
-    QString com;
-    QString pix;
-    QString field;
+    TQString objClass = getClassName( e.parentNode().toElement() );
+    TQDomElement n = e.firstChild().toElement();
+    TQString txt;
+    TQString com;
+    TQString pix;
+    TQString field;
     bool isRow = e.tagName() == "row";
     while ( !n.isNull() ) {
 	if ( n.tagName() == "property" ) {
-	    QString attrib = n.attribute("name");
-	    QVariant v = DomTool::elementToVariant( n.firstChild().toElement(), QVariant() );
+	    TQString attrib = n.attribute("name");
+	    TQVariant v = DomTool::elementToVariant( n.firstChild().toElement(), TQVariant() );
 	    if ( attrib == "text" ) {
 		txt = v.toString();
 		com = getComment( n );
@@ -772,8 +772,8 @@ QString Uic::createTableRowColumnImpl( const QDomElement &e, const QString &pare
 		    if ( pixmapLoaderFunction.isEmpty() ) {
 		        pix.prepend( "self." );
 		    } else {
-		        pix.prepend( pixmapLoaderFunction + "( " + QString( externPixmaps ? "\"" : "self." ) );
-		        pix.append(  QString( externPixmaps ? "\"" : "" ) + ")" );
+		        pix.prepend( pixmapLoaderFunction + "( " + TQString( externPixmaps ? "\"" : "self." ) );
+		        pix.append(  TQString( externPixmaps ? "\"" : "" ) + ")" );
 		    }
 		}
 	    } else if ( attrib == "field" )
@@ -787,32 +787,32 @@ QString Uic::createTableRowColumnImpl( const QDomElement &e, const QString &pare
 
     // ### This generated code sucks! We have to set the number of
     // rows/cols before and then only do setLabel/()
-    // ### careful, though, since QDataTable has an API which makes this code pretty good
+    // ### careful, though, since TQDataTable has an API which makes this code pretty good
 
-    QString s;
+    TQString s;
     if ( isRow ) {
 	s = indent + parent + ".setNumRows(" + parent + ".numRows() + 1)\n";
 	if ( pix.isEmpty() )
 	    s += indent + parent + ".verticalHeader().setLabel(" + parent + ".numRows() - 1,"
 		 + trcall( txt, com ) + ")\n";
 	else
-	    s += indent + parent + ".verticalHeader().setLabel(" + parent + ".numRows() - 1,QIconSet("
+	    s += indent + parent + ".verticalHeader().setLabel(" + parent + ".numRows() - 1,TQIconSet("
 		 + pix + ")," + trcall( txt, com ) + ")\n";
     } else {
-	if ( objClass == "QTable" ) {
+	if ( objClass == "TQTable" ) {
 	    s = indent + parent + ".setNumCols(" + parent + ".numCols() + 1)\n";
 	    if ( pix.isEmpty() )
 		s += indent + parent + ".horizontalHeader().setLabel(" + parent + ".numCols() - 1,"
 		     + trcall( txt, com ) + ")\n";
 	    else
-		s += indent + parent + ".horizontalHeader().setLabel(" + parent + ".numCols() - 1,QIconSet("
+		s += indent + parent + ".horizontalHeader().setLabel(" + parent + ".numCols() - 1,TQIconSet("
 		     + pix + ")," + trcall( txt, com ) + ")\n";
-	} else if ( objClass == "QDataTable" ) {
+	} else if ( objClass == "TQDataTable" ) {
 	    if ( !txt.isEmpty() && !field.isEmpty() ) {
 		if ( pix.isEmpty() )
 		    out << indent << parent << ".addColumn(" << fixString( field ) << "," << trcall( txt, com ) << ")" << endl;
 		else
-		    out << indent << parent << ".addColumn(" << fixString( field ) << "," << trcall( txt, com ) << ",QIconSet(" << pix << "))" << endl;
+		    out << indent << parent << ".addColumn(" << fixString( field ) << "," << trcall( txt, com ) << ",TQIconSet(" << pix << "))" << endl;
 	    }
 	}
     }
@@ -822,36 +822,36 @@ QString Uic::createTableRowColumnImpl( const QDomElement &e, const QString &pare
 /*!
   Creates the implementation of a layout tag. Called from createObjectImpl().
  */
-QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass, const QString& parent, const QString& layout )
+TQString Uic::createLayoutImpl( const TQDomElement &e, const TQString& parentClass, const TQString& parent, const TQString& layout )
 {
-    QDomElement n;
-    QString objClass, objName;
+    TQDomElement n;
+    TQString objClass, objName;
     objClass = e.tagName();
 
-    QString qlayout = "QVBoxLayout";
+    TQString qlayout = "TQVBoxLayout";
     if ( objClass == "hbox" )
-	qlayout = "QHBoxLayout";
+	qlayout = "TQHBoxLayout";
     else if ( objClass == "grid" )
-	qlayout = "QGridLayout";
+	qlayout = "TQGridLayout";
 
     bool isGrid = e.tagName() == "grid" ;
     objName = registerObject( getLayoutName( e ) );
     layoutObjects += objName;
 
-    QString margin = DomTool::readProperty( e, "margin", defMargin ).toString();
-    QString spacing = DomTool::readProperty( e, "spacing", defSpacing ).toString();
-    QString resizeMode = DomTool::readProperty( e, "resizeMode", QString::null ).toString();
+    TQString margin = DomTool::readProperty( e, "margin", defMargin ).toString();
+    TQString spacing = DomTool::readProperty( e, "spacing", defSpacing ).toString();
+    TQString resizeMode = DomTool::readProperty( e, "resizeMode", TQString::null ).toString();
 
-    QString optcells;
+    TQString optcells;
     if ( isGrid )
 	optcells = "1,1,";
-    if ( (parentClass == "QGroupBox" || parentClass == "QButtonGroup") && layout.isEmpty() ) {
+    if ( (parentClass == "TQGroupBox" || parentClass == "TQButtonGroup") && layout.isEmpty() ) {
 	// special case for group box
-	out << indent << parent << ".setColumnLayout(0,Qt.Vertical)" << endl;
+	out << indent << parent << ".setColumnLayout(0,TQt.Vertical)" << endl;
 	out << indent << parent << ".layout().setSpacing(" << spacing << ")" << endl;
 	out << indent << parent << ".layout().setMargin(" << margin << ")" << endl;
 	out << indent << objName << " = " << qlayout << "(" << parent << ".layout())" << endl;
-	out << indent << objName << ".setAlignment(Qt.AlignTop)" << endl;
+	out << indent << objName << ".setAlignment(TQt.AlignTop)" << endl;
     } else {
 	out << indent << objName << " = " << qlayout << "(";
 	if ( layout.isEmpty() )
@@ -864,15 +864,15 @@ QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass,
 	out << "," << optcells << margin << "," << spacing << ",\"" << objName << "\")" << endl;
     }
     if ( !resizeMode.isEmpty() )
-	out << indent << objName << ".setResizeMode(QLayout." << resizeMode << ")" << endl;
+	out << indent << objName << ".setResizeMode(TQLayout." << resizeMode << ")" << endl;
 
     if ( !isGrid ) {
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
 	    if ( n.tagName() == "spacer" ) {
-		QString child = createSpacerImpl( n, parentClass, parent, objName );
+		TQString child = createSpacerImpl( n, parentClass, parent, objName );
 		out << indent << objName << ".addItem(" << child << ")" << endl;
 	    } else if ( tags.contains( n.tagName() ) ) {
-		QString child = createObjectImpl( n, parentClass, parent, objName );
+		TQString child = createObjectImpl( n, parentClass, parent, objName );
 		if ( isLayout( child ) )
 		    out << indent << objName << ".addLayout(" << child << ")" << endl;
 		else
@@ -881,7 +881,7 @@ QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass,
 	}
     } else {
 	for ( n = e.firstChild().toElement(); !n.isNull(); n = n.nextSibling().toElement() ) {
-	    QDomElement ae = n;
+	    TQDomElement ae = n;
 	    int row = ae.attribute( "row" ).toInt();
 	    int col = ae.attribute( "column" ).toInt();
 	    int rowspan = ae.attribute( "rowspan" ).toInt();
@@ -891,7 +891,7 @@ QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass,
 	    if ( colspan < 1 )
 		colspan = 1;
 	    if ( n.tagName() == "spacer" ) {
-		QString child = createSpacerImpl( n, parentClass, parent, objName );
+		TQString child = createSpacerImpl( n, parentClass, parent, objName );
 		if ( rowspan * colspan != 1 )
 		    out << indent << objName << ".addMultiCell(" << child << ","
 			<< row << "," << ( row + rowspan - 1 ) << "," << col << "," << ( col  + colspan - 1 ) << ")" << endl;
@@ -899,9 +899,9 @@ QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass,
 		    out << indent << objName << ".addItem(" << child << ","
 			<< row << "," << col << ")" << endl;
 	    } else if ( tags.contains( n.tagName() ) ) {
-		QString child = createObjectImpl( n, parentClass, parent, objName );
+		TQString child = createObjectImpl( n, parentClass, parent, objName );
 		out << endl;
-		QString o = "Widget";
+		TQString o = "Widget";
 		if ( isLayout( child ) )
 		    o = "Layout";
 		if ( rowspan * colspan != 1 )
@@ -919,31 +919,31 @@ QString Uic::createLayoutImpl( const QDomElement &e, const QString& parentClass,
 
 
 
-QString Uic::createSpacerImpl( const QDomElement &e, const QString& /*parentClass*/, const QString& /*parent*/, const QString& /*layout*/)
+TQString Uic::createSpacerImpl( const TQDomElement &e, const TQString& /*parentClass*/, const TQString& /*parent*/, const TQString& /*layout*/)
 {
-    QDomElement n;
-    QString objClass, objName;
+    TQDomElement n;
+    TQString objClass, objName;
     objClass = e.tagName();
     objName = registerObject( getObjectName( e ) );
 
-    QSize size = DomTool::readProperty( e, "sizeHint", QSize( 0, 0 ) ).toSize();
-    QString sizeType = DomTool::readProperty( e, "sizeType", "Expanding" ).toString();
+    TQSize size = DomTool::readProperty( e, "sizeHint", TQSize( 0, 0 ) ).toSize();
+    TQString sizeType = DomTool::readProperty( e, "sizeType", "Expanding" ).toString();
     bool isVspacer = DomTool::readProperty( e, "orientation", "Horizontal" ) == "Vertical";
 
     if ( sizeType != "Expanding" && sizeType != "MinimumExpanding" &&
-	 DomTool::hasProperty( e, "geometry" ) ) { // compatibility Qt 2.2
-	QRect geom = DomTool::readProperty( e, "geometry", QRect(0,0,0,0) ).toRect();
+	 DomTool::hasProperty( e, "geometry" ) ) { // compatibility TQt 2.2
+	TQRect geom = DomTool::readProperty( e, "geometry", TQRect(0,0,0,0) ).toRect();
 	size = geom.size();
     }
 
     if ( isVspacer )
-	out << indent << objName << " = QSpacerItem("
+	out << indent << objName << " = TQSpacerItem("
 	    << size.width() << "," << size.height()
-	    << ",QSizePolicy.Minimum,QSizePolicy." << sizeType << ")" << endl;
+	    << ",TQSizePolicy.Minimum,TQSizePolicy." << sizeType << ")" << endl;
     else
-	out << indent << objName << " = QSpacerItem("
+	out << indent << objName << " = TQSpacerItem("
 	    << size.width() << "," << size.height()
-	    << ",QSizePolicy." << sizeType << ",QSizePolicy.Minimum)" << endl;
+	    << ",TQSizePolicy." << sizeType << ",TQSizePolicy.Minimum)" << endl;
 
     return objName;
 }
@@ -958,35 +958,35 @@ static const char* const ColorRole[] = {
 /*!
   Creates a colorgroup with name \a name from the color group \a cg
  */
-void Uic::createColorGroupImpl( const QString& name, const QDomElement& e )
+void Uic::createColorGroupImpl( const TQString& name, const TQDomElement& e )
 {
-    QColorGroup cg;
+    TQColorGroup cg;
     int r = -1;
-    QDomElement n = e.firstChild().toElement();
-    QString color;
+    TQDomElement n = e.firstChild().toElement();
+    TQString color;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "color" ) {
 	    r++;
-	    QColor col = DomTool::readColor( n );
-	    color = "QColor(%1,%2,%3)";
+	    TQColor col = DomTool::readColor( n );
+	    color = "TQColor(%1,%2,%3)";
 	    color = color.arg( col.red() ).arg( col.green() ).arg( col.blue() );
 	    if ( col == white )
-		color = "Qt.white";
+		color = "TQt.white";
 	    else if ( col == black )
-	    color = "Qt.black";
+	    color = "TQt.black";
 	    if ( n.nextSibling().toElement().tagName() != "pixmap" ) {
-		out << indent << name << ".setColor(QColorGroup." << ColorRole[r] << "," << color << ")" << endl;
+		out << indent << name << ".setColor(TQColorGroup." << ColorRole[r] << "," << color << ")" << endl;
 	    }
 	} else if ( n.tagName() == "pixmap" ) {
-	    QString pixmap = n.firstChild().toText().data();
+	    TQString pixmap = n.firstChild().toText().data();
 	    if ( pixmapLoaderFunction.isEmpty() ) {
 		pixmap.prepend( "self." );
 	    } else {
-		pixmap.prepend( pixmapLoaderFunction + "(" + QString( externPixmaps ? "\"" : "self." ) );
-		pixmap.append( QString( externPixmaps ? "\"" : "" ) + ")" );
+		pixmap.prepend( pixmapLoaderFunction + "(" + TQString( externPixmaps ? "\"" : "self." ) );
+		pixmap.append( TQString( externPixmaps ? "\"" : "" ) + ")" );
 	    }
-	    out << indent << name << ".setBrush(QColorGroup."
-		<< ColorRole[r] << ",QBrush(" << color << "," << pixmap << "))" << endl;
+	    out << indent << name << ".setBrush(TQColorGroup."
+		<< ColorRole[r] << ",TQBrush(" << color << "," << pixmap << "))" << endl;
 	}
 	n = n.nextSibling().toElement();
     }
@@ -996,16 +996,16 @@ void Uic::createColorGroupImpl( const QString& name, const QDomElement& e )
   Auxiliary function to load a color group. The colorgroup must not
   contain pixmaps.
  */
-QColorGroup Uic::loadColorGroup( const QDomElement &e )
+TQColorGroup Uic::loadColorGroup( const TQDomElement &e )
 {
-    QColorGroup cg;
+    TQColorGroup cg;
     int r = -1;
-    QDomElement n = e.firstChild().toElement();
-    QColor col;
+    TQDomElement n = e.firstChild().toElement();
+    TQColor col;
     while ( !n.isNull() ) {
 	if ( n.tagName() == "color" ) {
 	    r++;
-	    cg.setColor( (QColorGroup::ColorRole)r, (col = DomTool::readColor( n ) ) );
+	    cg.setColor( (TQColorGroup::ColorRole)r, (col = DomTool::readColor( n ) ) );
 	}
 	n = n.nextSibling().toElement();
     }
@@ -1016,10 +1016,10 @@ QColorGroup Uic::loadColorGroup( const QDomElement &e )
   the database \a connection and \a table.
 */
 
-bool Uic::isWidgetInTable( const QDomElement& e, const QString& connection, const QString& table )
+bool Uic::isWidgetInTable( const TQDomElement& e, const TQString& connection, const TQString& table )
 {
-    QString conn = getDatabaseInfo( e, "connection" );
-    QString tab = getDatabaseInfo( e, "table" );
+    TQString conn = getDatabaseInfo( e, "connection" );
+    TQString tab = getDatabaseInfo( e, "table" );
     if ( conn == connection && tab == table )
 	return TRUE;
     return FALSE;
@@ -1029,17 +1029,17 @@ bool Uic::isWidgetInTable( const QDomElement& e, const QString& connection, cons
   Registers all database connections, cursors and forms.
 */
 
-void Uic::registerDatabases( const QDomElement& e )
+void Uic::registerDatabases( const TQDomElement& e )
 {
-    QDomElement n;
-    QDomNodeList nl;
+    TQDomElement n;
+    TQDomNodeList nl;
     int i;
     nl = e.parentNode().toElement().elementsByTagName( "widget" );
     for ( i = 0; i < (int) nl.length(); ++i ) {
 	n = nl.item(i).toElement();
-	QString conn = getDatabaseInfo( n, "connection"  );
-	QString tab = getDatabaseInfo( n, "table"  );
-	QString fld = getDatabaseInfo( n, "field"  );
+	TQString conn = getDatabaseInfo( n, "connection"  );
+	TQString tab = getDatabaseInfo( n, "table"  );
+	TQString fld = getDatabaseInfo( n, "field"  );
 	if ( !conn.isNull() ) {
 	    dbConnections += conn;
 	    if ( !tab.isNull() ) {
@@ -1059,7 +1059,7 @@ void Uic::registerDatabases( const QDomElement& e )
 
   \sa registeredName(), isObjectRegistered()
  */
-QString Uic::registerObject( const QString& name )
+TQString Uic::registerObject( const TQString& name )
 {
     if ( objectNames.isEmpty() ) {
 	// some temporary variables we need
@@ -1069,7 +1069,7 @@ QString Uic::registerObject( const QString& name )
 	objectNames += "pal";
     }
 
-    QString result = name;
+    TQString result = name;
     int i;
     while ( ( i = result.find(' ' )) != -1  ) {
 	result[i] = '_';
@@ -1077,10 +1077,10 @@ QString Uic::registerObject( const QString& name )
 
     if ( objectNames.contains( result ) ) {
 	int i = 2;
-	while ( objectNames.contains( result + "_" + QString::number(i) ) )
+	while ( objectNames.contains( result + "_" + TQString::number(i) ) )
 	    i++;
 	result += "_";
-	result += QString::number(i);
+	result += TQString::number(i);
     }
     objectNames += result;
     objectMapper.insert( name, result );
@@ -1093,7 +1093,7 @@ QString Uic::registerObject( const QString& name )
 
   \sa registerObject(), isObjectRegistered()
  */
-QString Uic::registeredName( const QString& name )
+TQString Uic::registeredName( const TQString& name )
 {
     if ( !objectMapper.contains( name ) )
 	return name;
@@ -1103,22 +1103,22 @@ QString Uic::registeredName( const QString& name )
 /*!
   Returns whether the object \a name was registered yet or not.
  */
-bool Uic::isObjectRegistered( const QString& name )
+bool Uic::isObjectRegistered( const TQString& name )
 {
     return objectMapper.contains( name );
 }
 
 
 /*!
-  Unifies the entries in stringlist \a list. Should really be a QStringList feature.
+  Unifies the entries in stringlist \a list. Should really be a TQStringList feature.
  */
-QStringList Uic::unique( const QStringList& list )
+TQStringList Uic::unique( const TQStringList& list )
 {
     if ( list.isEmpty() )
 	return list;
 
-    QStringList result;
-    for ( QStringList::ConstIterator it = list.begin(); it != list.end(); ++it ) {
+    TQStringList result;
+    for ( TQStringList::ConstIterator it = list.begin(); it != list.end(); ++it ) {
 	if ( !result.contains(*it) )
 	    result += *it;
     }
@@ -1130,7 +1130,7 @@ QStringList Uic::unique( const QStringList& list )
 /*!
   Creates an instance of class \a objClass, with parent \a parent and name \a objName
  */
-QString Uic::createObjectInstance( const QString& objClass, const QString& parent, const QString& objName )
+TQString Uic::createObjectInstance( const TQString& objClass, const TQString& parent, const TQString& objName )
 {
 
     if ( objClass.mid( 1 ) == "ComboBox" ) {
@@ -1139,7 +1139,7 @@ QString Uic::createObjectInstance( const QString& objClass, const QString& paren
     return objClass + "(" + parent + ",\"" + objName + "\")";
 }
 
-bool Uic::isLayout( const QString& name ) const
+bool Uic::isLayout( const TQString& name ) const
 {
     return layoutObjects.contains( name );
 }
diff --git a/pyuic3/uic.h b/pyuic3/uic.h
index f00d4a4..710d6e2 100644
--- a/pyuic3/uic.h
+++ b/pyuic3/uic.h
@@ -2,7 +2,7 @@
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 ** Copyright (c) 2001 Phil Thompson <phil@river-bank.demon.co.uk>
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -42,100 +42,100 @@ public:
 	uint setIndent(uint i) {uint old = current; current = i; calc(); return old;}
 	void operator++() {++current; calc();}
 	void operator--() {--current; calc();}
-	operator QString() {return indstr;}
+	operator TQString() {return indstr;}
 
 private:
 	uint tabStop;
 	uint current;
-	QString indstr;
+	TQString indstr;
 
 	void calc();
 };
 
 
-class Uic : public Qt
+class Uic : public TQt
 {
 public:
-    Uic( const QString &fn, const char *outputFn, QTextStream& out,
-	 QDomDocument doc, bool subcl, const QString &trm,
-	 const QString& subclname, QString &uicClass );
+    Uic( const TQString &fn, const char *outputFn, TQTextStream& out,
+	 TQDomDocument doc, bool subcl, const TQString &trm,
+	 const TQString& subclname, TQString &uicClass );
 
     static void setIndent(const PyIndent &pyind) {indent = pyind; trindent = pyind;}
 
-    void createFormImpl( const QDomElement &e );
-
-    void createSubImpl( const QDomElement &e, const QString& subclname );
-
-    void createActionImpl( const QDomElement& e, const QString &parent );
-    void createToolbarImpl( const QDomElement &e, const QString &parentClass, const QString &parent );
-    void createMenuBarImpl( const QDomElement &e, const QString &parentClass, const QString &parent );
-    void createPopupMenuImpl( const QDomElement &e, const QString &parentClass, const QString &parent );
-    QString createObjectImpl( const QDomElement &e, const QString& parentClass, const QString& parent, const QString& layout = QString::null );
-    QString createLayoutImpl( const QDomElement &e, const QString& parentClass, const QString& parent, const QString& layout = QString::null );
-    QString createObjectInstance( const QString& objClass, const QString& parent, const QString& objName );
-    QString createSpacerImpl( const QDomElement &e, const QString& parentClass, const QString& parent, const QString& layout = QString::null );
-    void createExclusiveProperty( const QDomElement & e, const QString& exclusiveProp );
-    QString createListBoxItemImpl( const QDomElement &e, const QString &parent, QString *value = 0 );
-    QString createIconViewItemImpl( const QDomElement &e, const QString &parent );
-    QString createListViewColumnImpl( const QDomElement &e, const QString &parent, QString *value = 0 );
-    QString createTableRowColumnImpl( const QDomElement &e, const QString &parent, QString *value = 0 );
-    QString createListViewItemImpl( const QDomElement &e, const QString &parent,
-				    const QString &parentItem );
-    void createColorGroupImpl( const QString& cg, const QDomElement& e );
-    QColorGroup loadColorGroup( const QDomElement &e );
-
-    QDomElement getObjectProperty( const QDomElement& e, const QString& name );
-    QString getPixmapLoaderFunction( const QDomElement& e );
-    QString getFormClassName( const QDomElement& e );
-    QString getClassName( const QDomElement& e );
-    QString getObjectName( const QDomElement& e );
-    QString getLayoutName( const QDomElement& e );
-    QString getInclude( const QString& className );
-
-    QString setObjectProperty( const QString& objClass, const QString& obj, const QString &prop, const QDomElement &e, bool stdset );
-
-    QString registerObject( const QString& name );
-    QString registeredName( const QString& name );
-    bool isObjectRegistered( const QString& name );
-    QStringList unique( const QStringList& );
-
-    QString trcall( const QString& sourceText, const QString& comment = "" );
-
-    static void embed( QTextStream& out, const char* project, const QStringList& images );
+    void createFormImpl( const TQDomElement &e );
+
+    void createSubImpl( const TQDomElement &e, const TQString& subclname );
+
+    void createActionImpl( const TQDomElement& e, const TQString &parent );
+    void createToolbarImpl( const TQDomElement &e, const TQString &parentClass, const TQString &parent );
+    void createMenuBarImpl( const TQDomElement &e, const TQString &parentClass, const TQString &parent );
+    void createPopupMenuImpl( const TQDomElement &e, const TQString &parentClass, const TQString &parent );
+    TQString createObjectImpl( const TQDomElement &e, const TQString& parentClass, const TQString& parent, const TQString& layout = TQString::null );
+    TQString createLayoutImpl( const TQDomElement &e, const TQString& parentClass, const TQString& parent, const TQString& layout = TQString::null );
+    TQString createObjectInstance( const TQString& objClass, const TQString& parent, const TQString& objName );
+    TQString createSpacerImpl( const TQDomElement &e, const TQString& parentClass, const TQString& parent, const TQString& layout = TQString::null );
+    void createExclusiveProperty( const TQDomElement & e, const TQString& exclusiveProp );
+    TQString createListBoxItemImpl( const TQDomElement &e, const TQString &parent, TQString *value = 0 );
+    TQString createIconViewItemImpl( const TQDomElement &e, const TQString &parent );
+    TQString createListViewColumnImpl( const TQDomElement &e, const TQString &parent, TQString *value = 0 );
+    TQString createTableRowColumnImpl( const TQDomElement &e, const TQString &parent, TQString *value = 0 );
+    TQString createListViewItemImpl( const TQDomElement &e, const TQString &parent,
+				    const TQString &parentItem );
+    void createColorGroupImpl( const TQString& cg, const TQDomElement& e );
+    TQColorGroup loadColorGroup( const TQDomElement &e );
+
+    TQDomElement getObjectProperty( const TQDomElement& e, const TQString& name );
+    TQString getPixmapLoaderFunction( const TQDomElement& e );
+    TQString getFormClassName( const TQDomElement& e );
+    TQString getClassName( const TQDomElement& e );
+    TQString getObjectName( const TQDomElement& e );
+    TQString getLayoutName( const TQDomElement& e );
+    TQString getInclude( const TQString& className );
+
+    TQString setObjectProperty( const TQString& objClass, const TQString& obj, const TQString &prop, const TQDomElement &e, bool stdset );
+
+    TQString registerObject( const TQString& name );
+    TQString registeredName( const TQString& name );
+    bool isObjectRegistered( const TQString& name );
+    TQStringList unique( const TQStringList& );
+
+    TQString trcall( const TQString& sourceText, const TQString& comment = "" );
+
+    static void embed( TQTextStream& out, const char* project, const TQStringList& images );
 
 private:
-    QTextStream& out;
-    QTextOStream trout;
-    QString languageChangeBody;
-    QCString outputFileName;
-    QStringList objectNames;
-    QMap<QString,QString> objectMapper;
-    QStringList tags;
-    QStringList layouts;
-    QString formName;
-    QString lastItem;
-    QString trmacro;
+    TQTextStream& out;
+    TQTextOStream trout;
+    TQString languageChangeBody;
+    TQCString outputFileName;
+    TQStringList objectNames;
+    TQMap<TQString,TQString> objectMapper;
+    TQStringList tags;
+    TQStringList layouts;
+    TQString formName;
+    TQString lastItem;
+    TQString trmacro;
     static PyIndent indent, trindent;
 
     struct Buddy
     {
-	Buddy( const QString& k, const QString& b )
+	Buddy( const TQString& k, const TQString& b )
 	    : key( k ), buddy( b ) {}
 	Buddy(){} // for valuelist
-	QString key;
-	QString buddy;
+	TQString key;
+	TQString buddy;
 	bool operator==( const Buddy& other ) const
 	    { return (key == other.key); }
     };
     struct CustomInclude
     {
-	QString header;
-	QString location;
+	TQString header;
+	TQString location;
     };
-    QValueList<Buddy> buddies;
+    TQValueList<Buddy> buddies;
 
-    QStringList layoutObjects;
-    bool isLayout( const QString& name ) const;
+    TQStringList layoutObjects;
+    bool isLayout( const TQString& name ) const;
 
     uint item_used : 1;
     uint cg_used : 1;
@@ -144,39 +144,39 @@ private:
     uint externPixmaps : 1;
 
 #if QT_VERSION >= 0x030300
-    QString uiFileVersion;
+    TQString uiFileVersion;
 #endif
-    QString nameOfClass;
-    QStringList namespaces;
-    QString bareNameOfClass;
-    QString pixmapLoaderFunction;
-
-    void registerDatabases( const QDomElement& e );
-    bool isWidgetInTable( const QDomElement& e, const QString& connection, const QString& table );
-    bool isFrameworkCodeGenerated( const QDomElement& e );
-    QString getDatabaseInfo( const QDomElement& e, const QString& tag );
-    void createFormImpl( const QDomElement& e, const QString& form, const QString& connection, const QString& table );
-    void writeFunctionsSubImpl( const QStringList &fuLst, const QStringList &typLst, const QStringList &specLst,
-                                const QString &subClass, const QString &descr );
-    QStringList dbConnections;
-    QMap< QString, QStringList > dbCursors;
-    QMap< QString, QStringList > dbForms;
+    TQString nameOfClass;
+    TQStringList namespaces;
+    TQString bareNameOfClass;
+    TQString pixmapLoaderFunction;
+
+    void registerDatabases( const TQDomElement& e );
+    bool isWidgetInTable( const TQDomElement& e, const TQString& connection, const TQString& table );
+    bool isFrameworkCodeGenerated( const TQDomElement& e );
+    TQString getDatabaseInfo( const TQDomElement& e, const TQString& tag );
+    void createFormImpl( const TQDomElement& e, const TQString& form, const TQString& connection, const TQString& table );
+    void writeFunctionsSubImpl( const TQStringList &fuLst, const TQStringList &typLst, const TQStringList &specLst,
+                                const TQString &subClass, const TQString &descr );
+    TQStringList dbConnections;
+    TQMap< TQString, TQStringList > dbCursors;
+    TQMap< TQString, TQStringList > dbForms;
 
     static bool isMainWindow;
-    static QString mkBool( bool b );
-    static QString mkBool( const QString& s );
-    bool toBool( const QString& s );
-    static QString fixString( const QString &str, bool encode = FALSE );
+    static TQString mkBool( bool b );
+    static TQString mkBool( const TQString& s );
+    bool toBool( const TQString& s );
+    static TQString fixString( const TQString &str, bool encode = FALSE );
     static bool onlyAscii;
-    static QString mkStdSet( const QString& prop );
-    static QString getComment( const QDomNode& n );
-    QVariant defSpacing, defMargin;
-    QString fileName;
+    static TQString mkStdSet( const TQString& prop );
+    static TQString getComment( const TQDomNode& n );
+    TQVariant defSpacing, defMargin;
+    TQString fileName;
     bool writeFunctImpl;
 
-    void pySlot(QStringList::ConstIterator &it);
+    void pySlot(TQStringList::ConstIterator &it);
 
-    QString pyCode;
+    TQString pyCode;
     bool pyNeedTr, pyNeedTrUtf8;
 };
 
diff --git a/pyuic3/widgetdatabase.cpp b/pyuic3/widgetdatabase.cpp
index 6c447d5..4eb7914 100644
--- a/pyuic3/widgetdatabase.cpp
+++ b/pyuic3/widgetdatabase.cpp
@@ -1,15 +1,15 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
-** Licensees holding valid Qt Enterprise Edition or Qt Professional Edition
-** licenses may use this file in accordance with the Qt Commercial License
+** Licensees holding valid TQt Enterprise Edition or TQt Professional Edition
+** licenses may use this file in accordance with the TQt Commercial License
 ** Agreement provided with the Software.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
@@ -17,7 +17,7 @@
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 ** See http://www.trolltech.com/pricing.html or email sales@trolltech.com for
-**   information about Qt Commercial License Agreements.
+**   information about TQt Commercial License Agreements.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
@@ -43,17 +43,17 @@ const int dbsize = 300;
 const int dbcustom = 200;
 const int dbdictsize = 211;
 static WidgetDatabaseRecord* db[ dbsize ];
-static QDict<int> *className2Id = 0;
+static TQDict<int> *className2Id = 0;
 static int dbcount  = 0;
 static int dbcustomcount = 200;
-static QStrList *wGroups;
-static QStrList *invisibleGroups;
+static TQStrList *wGroups;
+static TQStrList *invisibleGroups;
 static bool whatsThisLoaded = FALSE;
-static QPluginManager<WidgetInterface> *widgetPluginManager = 0;
+static TQPluginManager<WidgetInterface> *widgetPluginManager = 0;
 static bool plugins_set_up = FALSE;
 static bool was_in_setup = FALSE;
 
-QCleanupHandler<QPluginManager<WidgetInterface> > cleanup_manager;
+TQCleanupHandler<TQPluginManager<WidgetInterface> > cleanup_manager;
 
 WidgetDatabaseRecord::WidgetDatabaseRecord()
 {
@@ -117,18 +117,18 @@ void WidgetDatabase::setupDataBase( int id )
 	return;
 #endif
 
-    wGroups = new QStrList;
-    invisibleGroups = new QStrList;
+    wGroups = new TQStrList;
+    invisibleGroups = new TQStrList;
     invisibleGroups->append( "Forms" );
     invisibleGroups->append( "Temp" );
-    className2Id = new QDict<int>( dbdictsize );
+    className2Id = new TQDict<int>( dbdictsize );
     className2Id->setAutoDelete( TRUE );
 
     WidgetDatabaseRecord *r = 0;
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_pushbutton.png";
-    r->name = "QPushButton";
+    r->name = "TQPushButton";
     r->group = widgetGroup( "Buttons" );
     r->toolTip = "Push Button";
     r->isCommon = TRUE;
@@ -137,7 +137,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_toolbutton.png";
-    r->name = "QToolButton";
+    r->name = "TQToolButton";
     r->group = widgetGroup( "Buttons" );
     r->toolTip = "Tool Button";
 
@@ -145,7 +145,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_radiobutton.png";
-    r->name = "QRadioButton";
+    r->name = "TQRadioButton";
     r->group = widgetGroup( "Buttons" );
     r->toolTip = "Radio Button";
     r->isCommon = TRUE;
@@ -154,7 +154,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_checkbox.png";
-    r->name = "QCheckBox";
+    r->name = "TQCheckBox";
     r->group = widgetGroup( "Buttons" );
     r->toolTip = "Check Box";
     r->isCommon = TRUE;
@@ -163,7 +163,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_groupbox.png";
-    r->name = "QGroupBox";
+    r->name = "TQGroupBox";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Group Box";
     r->isContainer = TRUE;
@@ -172,7 +172,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_buttongroup.png";
-    r->name = "QButtonGroup";
+    r->name = "TQButtonGroup";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Button Group";
     r->isContainer = TRUE;
@@ -182,7 +182,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_frame.png";
-    r->name = "QFrame";
+    r->name = "TQFrame";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Frame";
     r->isContainer = TRUE;
@@ -191,7 +191,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_tabwidget.png";
-    r->name = "QTabWidget";
+    r->name = "TQTabWidget";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Tabwidget";
     r->isContainer = TRUE;
@@ -200,7 +200,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_widgetstack.png";
-    r->name = "QWidgetStack";
+    r->name = "TQWidgetStack";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Widget Stack";
     r->isContainer = TRUE;
@@ -209,7 +209,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_toolbox.png";
-    r->name = "QToolBox";
+    r->name = "TQToolBox";
     r->group = widgetGroup( "Containers" );
     r->toolTip = "Tool Box";
     r->isContainer = TRUE;
@@ -218,7 +218,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_listbox.png";
-    r->name = "QListBox";
+    r->name = "TQListBox";
     r->group = widgetGroup( "Views" );
     r->toolTip = "List Box";
     r->isCommon = TRUE;
@@ -227,7 +227,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_listview.png";
-    r->name = "QListView";
+    r->name = "TQListView";
     r->group = widgetGroup( "Views" );
     r->toolTip = "List View";
 
@@ -236,7 +236,7 @@ void WidgetDatabase::setupDataBase( int id )
 #if !defined(QT_NO_ICONVIEW) || defined(UIC)
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_iconview.png";
-    r->name = "QIconView";
+    r->name = "TQIconView";
     r->group = widgetGroup( "Views" );
     r->toolTip = "Icon View";
 
@@ -246,7 +246,7 @@ void WidgetDatabase::setupDataBase( int id )
 #if !defined(QT_NO_TABLE)
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_table.png";
-    r->name = "QTable";
+    r->name = "TQTable";
     r->group = widgetGroup( "Views" );
     r->toolTip = "Table";
 
@@ -257,7 +257,7 @@ void WidgetDatabase::setupDataBase( int id )
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_datatable.png";
     r->includeFile = "qdatatable.h";
-    r->name = "QDataTable";
+    r->name = "TQDataTable";
     r->group = widgetGroup( "Database" );
     r->toolTip = "Data Table";
 
@@ -266,7 +266,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_lineedit.png";
-    r->name = "QLineEdit";
+    r->name = "TQLineEdit";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Line Edit";
     r->isCommon = TRUE;
@@ -275,7 +275,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_spinbox.png";
-    r->name = "QSpinBox";
+    r->name = "TQSpinBox";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Spin Box";
     r->isCommon = TRUE;
@@ -284,7 +284,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_dateedit.png";
-    r->name = "QDateEdit";
+    r->name = "TQDateEdit";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Date Edit";
     r->includeFile = "qdatetimeedit.h";
@@ -293,7 +293,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_timeedit.png";
-    r->name = "QTimeEdit";
+    r->name = "TQTimeEdit";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Time Edit";
     r->includeFile = "qdatetimeedit.h";
@@ -302,7 +302,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_datetimeedit.png";
-    r->name = "QDateTimeEdit";
+    r->name = "TQDateTimeEdit";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Date-Time Edit";
     r->includeFile = "qdatetimeedit.h";
@@ -311,7 +311,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_multilineedit.png";
-    r->name = "QMultiLineEdit";
+    r->name = "TQMultiLineEdit";
     r->group = widgetGroup( "Temp" );
     r->toolTip = "Multi Line Edit";
 
@@ -319,7 +319,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_richtextedit.png";
-    r->name = "QTextEdit";
+    r->name = "TQTextEdit";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Rich Text Edit";
     r->isCommon = TRUE;
@@ -328,7 +328,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_combobox.png";
-    r->name = "QComboBox";
+    r->name = "TQComboBox";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Combo Box";
     r->isCommon = TRUE;
@@ -337,7 +337,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_slider.png";
-    r->name = "QSlider";
+    r->name = "TQSlider";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Slider";
 
@@ -345,7 +345,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_scrollbar.png";
-    r->name = "QScrollBar";
+    r->name = "TQScrollBar";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Scrollbar";
 
@@ -353,7 +353,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_dial.png";
-    r->name = "QDial";
+    r->name = "TQDial";
     r->group = widgetGroup( "Input" );
     r->toolTip = "Dial";
 
@@ -361,7 +361,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_label.png";
-    r->name = "QLabel";
+    r->name = "TQLabel";
     r->group = widgetGroup( "Temp" );
     r->toolTip = "Label";
 
@@ -388,7 +388,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_lcdnumber.png";
-    r->name = "QLCDNumber";
+    r->name = "TQLCDNumber";
     r->group = widgetGroup( "Display" );
     r->toolTip = "LCD Number";
 
@@ -406,7 +406,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_progress.png";
-    r->name = "QProgressBar";
+    r->name = "TQProgressBar";
     r->group = widgetGroup( "Display" );
     r->toolTip = "Progress Bar";
 
@@ -414,7 +414,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_textview.png";
-    r->name = "QTextView";
+    r->name = "TQTextView";
     r->group = widgetGroup( "Temp" );
     r->toolTip = "Text View";
 
@@ -422,7 +422,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_textbrowser.png";
-    r->name = "QTextBrowser";
+    r->name = "TQTextBrowser";
     r->group = widgetGroup( "Display" );
     r->toolTip = "Text Browser";
 
@@ -438,35 +438,35 @@ void WidgetDatabase::setupDataBase( int id )
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QWidget";
+    r->name = "TQWidget";
     r->isForm = TRUE;
     r->group = widgetGroup( "Forms" );
 
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QDialog";
+    r->name = "TQDialog";
     r->group = widgetGroup( "Forms" );
     r->isForm = TRUE;
 
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QWizard";
+    r->name = "TQWizard";
     r->group = widgetGroup( "Forms" );
     r->isContainer = TRUE;
 
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QDesignerWizard";
+    r->name = "TQDesignerWizard";
     r->group = widgetGroup( "Forms" );
     r->isContainer = TRUE;
 
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QLayoutWidget";
+    r->name = "TQLayoutWidget";
     r->group = widgetGroup( "Temp" );
     r->includeFile = "";
     r->isContainer = TRUE;
@@ -474,7 +474,7 @@ void WidgetDatabase::setupDataBase( int id )
     append( r );
 
     r = new WidgetDatabaseRecord;
-    r->name = "QSplitter";
+    r->name = "TQSplitter";
     r->group = widgetGroup( "Temp" );
     r->includeFile = "qsplitter.h";
     r->isContainer = TRUE;
@@ -483,7 +483,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_tabwidget.png";
-    r->name = "QDesignerTabWidget";
+    r->name = "TQDesignerTabWidget";
     r->group = widgetGroup( "Temp" );
     r->isContainer = TRUE;
 
@@ -491,7 +491,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_tabwidget.png";
-    r->name = "QDesignerWidget";
+    r->name = "TQDesignerWidget";
     r->group = widgetGroup( "Temp" );
     r->isContainer = TRUE;
 
@@ -499,7 +499,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "designer_tabwidget.png";
-    r->name = "QDesignerDialog";
+    r->name = "TQDesignerDialog";
     r->group = widgetGroup( "Temp" );
     r->isContainer = TRUE;
 
@@ -507,7 +507,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QMainWindow";
+    r->name = "TQMainWindow";
     r->includeFile = "qmainwindow.h";
     r->group = widgetGroup( "Temp" );
     r->isContainer = TRUE;
@@ -516,7 +516,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QDesignerAction";
+    r->name = "TQDesignerAction";
     r->includeFile = "qaction.h";
     r->group = widgetGroup( "Temp" );
     r->isContainer = FALSE;
@@ -525,7 +525,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QDesignerActionGroup";
+    r->name = "TQDesignerActionGroup";
     r->includeFile = "qaction.h";
     r->group = widgetGroup( "Temp" );
     r->isContainer = FALSE;
@@ -534,7 +534,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QScrollView";
+    r->name = "TQScrollView";
     r->includeFile = "qscrollview.h";
     r->group = widgetGroup( "Temp" );
     r->isContainer = TRUE;
@@ -544,7 +544,7 @@ void WidgetDatabase::setupDataBase( int id )
 #ifndef QT_NO_SQL
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QDataBrowser";
+    r->name = "TQDataBrowser";
     r->includeFile = "qdatabrowser.h";
     r->group = widgetGroup( "Database" );
     r->toolTip = "Data Browser";
@@ -555,7 +555,7 @@ void WidgetDatabase::setupDataBase( int id )
 
     r = new WidgetDatabaseRecord;
     r->iconSet = "";
-    r->name = "QDataView";
+    r->name = "TQDataView";
     r->includeFile = "qdataview.h";
     r->group = widgetGroup( "Database" );
     r->toolTip = "Data View";
@@ -575,8 +575,8 @@ void WidgetDatabase::setupPlugins()
     if ( plugins_set_up )
 	return;
     plugins_set_up = TRUE;
-    QStringList widgets = widgetManager()->featureList();
-    for ( QStringList::Iterator it = widgets.begin(); it != widgets.end(); ++it ) {
+    TQStringList widgets = widgetManager()->featureList();
+    for ( TQStringList::Iterator it = widgets.begin(); it != widgets.end(); ++it ) {
 	if ( hasWidget( *it ) )
 	    continue;
 	WidgetDatabaseRecord *r = new WidgetDatabaseRecord;
@@ -586,11 +586,11 @@ void WidgetDatabase::setupPlugins()
 	    continue;
 
 #ifndef UIC
-	QIconSet icon = iface->iconSet( *it );
+	TQIconSet icon = iface->iconSet( *it );
 	if ( !icon.pixmap().isNull() )
-	    r->icon = new QIconSet( icon );
+	    r->icon = new TQIconSet( icon );
 #endif
-	QString grp = iface->group( *it );
+	TQString grp = iface->group( *it );
 	if ( grp.isEmpty() )
 	    grp = "3rd party widgets";
 	r->group = widgetGroup( grp );
@@ -629,24 +629,24 @@ int WidgetDatabase::startCustom()
   Returns the iconset which represents the class registered as \a id.
 */
 
-QIconSet WidgetDatabase::iconSet( int id )
+TQIconSet WidgetDatabase::iconSet( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QIconSet();
+	return TQIconSet();
 #if !defined(UIC) && !defined(RESOURCE)
     if ( !r->icon ) {
 	if ( r->iconSet.isEmpty() )
-	    return QIconSet();
-	QPixmap pix = QPixmap::fromMimeSource( r->iconSet );
+	    return TQIconSet();
+	TQPixmap pix = TQPixmap::fromMimeSource( r->iconSet );
 	if ( pix.isNull() )
-	    pix = QPixmap( r->iconSet );
-	r->icon = new QIconSet( pix );
+	    pix = TQPixmap( r->iconSet );
+	r->icon = new TQIconSet( pix );
     }
     return *r->icon;
 #else
-    return QIconSet();
+    return TQIconSet();
 #endif
 }
 
@@ -654,12 +654,12 @@ QIconSet WidgetDatabase::iconSet( int id )
   Returns the classname of the widget which is registered as \a id.
 */
 
-QString WidgetDatabase::className( int id )
+TQString WidgetDatabase::className( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QString::null;
+	return TQString::null;
     return r->name;
 }
 
@@ -667,12 +667,12 @@ QString WidgetDatabase::className( int id )
   Returns the group the widget registered as \a id belongs to.
 */
 
-QString WidgetDatabase::group( int id )
+TQString WidgetDatabase::group( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QString::null;
+	return TQString::null;
     return r->group;
 }
 
@@ -680,12 +680,12 @@ QString WidgetDatabase::group( int id )
   Returns the tooltip text of the widget which is registered as \a id.
 */
 
-QString WidgetDatabase::toolTip( int id )
+TQString WidgetDatabase::toolTip( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QString::null;
+	return TQString::null;
     return r->toolTip;
 }
 
@@ -693,12 +693,12 @@ QString WidgetDatabase::toolTip( int id )
   Returns the what's this? text of the widget which is registered as \a id.
 */
 
-QString WidgetDatabase::whatsThis( int id )
+TQString WidgetDatabase::whatsThis( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QString::null;
+	return TQString::null;
     return r->whatsThis;
 }
 
@@ -706,12 +706,12 @@ QString WidgetDatabase::whatsThis( int id )
   Returns the include file if the widget which is registered as \a id.
 */
 
-QString WidgetDatabase::includeFile( int id )
+TQString WidgetDatabase::includeFile( int id )
 {
     setupDataBase( id );
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
-	return QString::null;
+	return TQString::null;
     if ( r->includeFile.isNull() )
 	return r->name.lower() + ".h";
     return r->includeFile;
@@ -749,11 +749,11 @@ bool WidgetDatabase::isCommon( int id )
     return r->isCommon;
 }
 
-QString WidgetDatabase::createWidgetName( int id )
+TQString WidgetDatabase::createWidgetName( int id )
 {
     setupDataBase( id );
-    QString n = className( id );
-    if ( n == "QLayoutWidget" )
+    TQString n = className( id );
+    if ( n == "TQLayoutWidget" )
 	n = "Layout";
     if ( n[ 0 ] == 'Q' && n[ 1 ].lower() != n[ 1 ] )
 	n = n.mid( 1 );
@@ -764,14 +764,14 @@ QString WidgetDatabase::createWidgetName( int id )
     WidgetDatabaseRecord *r = at( id );
     if ( !r )
 	return n;
-    n += QString::number( ++r->nameCounter );
+    n += TQString::number( ++r->nameCounter );
     n[0] = n[0].lower();
     return n;
 }
 
 /*!  Returns the id for \a name or -1 if \a name is unknown.
  */
-int WidgetDatabase::idFromClassName( const QString &name )
+int WidgetDatabase::idFromClassName( const TQString &name )
 {
     setupDataBase( -1 );
     if ( name.isEmpty() )
@@ -780,7 +780,7 @@ int WidgetDatabase::idFromClassName( const QString &name )
     if ( i )
 	return *i;
     if ( name == "FormWindow" )
-	return idFromClassName( "QLayoutWidget" );
+	return idFromClassName( "TQLayoutWidget" );
 #ifdef UIC
     setupDataBase( -2 );
     i = className2Id->find( name );
@@ -790,7 +790,7 @@ int WidgetDatabase::idFromClassName( const QString &name )
     return -1;
 }
 
-bool WidgetDatabase::hasWidget( const QString &name )
+bool WidgetDatabase::hasWidget( const TQString &name )
 {
     return className2Id->find( name ) != 0;
 }
@@ -813,7 +813,7 @@ void WidgetDatabase::insert( int index, WidgetDatabaseRecord *r )
     db[ index ] = r;
     className2Id->insert( r->name, new int( index ) );
     if ( index < dbcustom )
-	dbcount = QMAX( dbcount, index );
+	dbcount = TQMAX( dbcount, index );
 }
 
 void WidgetDatabase::append( WidgetDatabaseRecord *r )
@@ -823,14 +823,14 @@ void WidgetDatabase::append( WidgetDatabaseRecord *r )
     insert( dbcount++, r );
 }
 
-QString WidgetDatabase::widgetGroup( const QString &g )
+TQString WidgetDatabase::widgetGroup( const TQString &g )
 {
     if ( wGroups->find( g ) == -1 )
 	wGroups->append( g );
     return g;
 }
 
-bool WidgetDatabase::isGroupEmpty( const QString &grp )
+bool WidgetDatabase::isGroupEmpty( const TQString &grp )
 {
     WidgetDatabaseRecord *r = 0;
     for ( int i = 0; i < dbcount; ++i ) {
@@ -842,12 +842,12 @@ bool WidgetDatabase::isGroupEmpty( const QString &grp )
     return TRUE;
 }
 
-QString WidgetDatabase::widgetGroup( int i )
+TQString WidgetDatabase::widgetGroup( int i )
 {
     setupDataBase( -1 );
     if ( i >= 0 && i < (int)wGroups->count() )
 	return wGroups->at( i );
-    return QString::null;
+    return TQString::null;
 }
 
 int WidgetDatabase::numWidgetGroups()
@@ -856,7 +856,7 @@ int WidgetDatabase::numWidgetGroups()
     return wGroups->count();
 }
 
-bool WidgetDatabase::isGroupVisible( const QString &g )
+bool WidgetDatabase::isGroupVisible( const TQString &g )
 {
     setupDataBase( -1 );
     return invisibleGroups->find( g ) == -1;
@@ -868,8 +868,8 @@ int WidgetDatabase::addCustomWidget( WidgetDatabaseRecord *r )
     return dbcustomcount - 1;
 }
 
-void WidgetDatabase::customWidgetClassNameChanged( const QString &oldName,
-						   const QString &newName )
+void WidgetDatabase::customWidgetClassNameChanged( const TQString &oldName,
+						   const TQString &newName )
 {
     int id = idFromClassName( oldName );
     if ( id == -1 )
@@ -901,16 +901,16 @@ bool WidgetDatabase::isWhatsThisLoaded()
     return whatsThisLoaded;
 }
 
-void WidgetDatabase::loadWhatsThis( const QString &docPath )
+void WidgetDatabase::loadWhatsThis( const TQString &docPath )
 {
-    QString whatsthisFile = docPath + "/whatsthis";
-    QFile f( whatsthisFile );
+    TQString whatsthisFile = docPath + "/whatsthis";
+    TQFile f( whatsthisFile );
     if ( !f.open( IO_ReadOnly ) )
 	return;
-    QTextStream ts( &f );
+    TQTextStream ts( &f );
     while ( !ts.atEnd() ) {
-	QString s = ts.readLine();
-	QStringList l = QStringList::split( " | ", s );
+	TQString s = ts.readLine();
+	TQStringList l = TQStringList::split( " | ", s );
 	int id = idFromClassName( l[ 1 ] );
 	WidgetDatabaseRecord *r = at( id );
 	if ( r )
@@ -920,30 +920,30 @@ void WidgetDatabase::loadWhatsThis( const QString &docPath )
 }
 
 
-// ### Qt 3.1: make these publically accessible via QWidgetDatabase API
+// ### TQt 3.1: make these publically accessible via TQWidgetDatabase API
 #if defined(UIC)
 bool dbnounload = FALSE;
-QStringList *dbpaths = 0;
+TQStringList *dbpaths = 0;
 #else
-extern QString *qwf_plugin_dir;
+extern TQString *qwf_plugin_dir;
 #endif
 
 
-QPluginManager<WidgetInterface> *widgetManager()
+TQPluginManager<WidgetInterface> *widgetManager()
 {
     if ( !widgetPluginManager ) {
-	QString pluginDir = "/designer";
+	TQString pluginDir = "/designer";
 #if !defined(UIC)
 	if ( qwf_plugin_dir )
 	    pluginDir = *qwf_plugin_dir;
 #endif
-	widgetPluginManager = new QPluginManager<WidgetInterface>( IID_Widget, QApplication::libraryPaths(), pluginDir );
+	widgetPluginManager = new TQPluginManager<WidgetInterface>( IID_Widget, TQApplication::libraryPaths(), pluginDir );
 	cleanup_manager.add( &widgetPluginManager );
 #if defined(UIC)
 	if ( dbnounload )
 	    widgetPluginManager->setAutoUnload( FALSE );
 	if ( dbpaths ) {
-	    QStringList::ConstIterator it = dbpaths->begin();
+	    TQStringList::ConstIterator it = dbpaths->begin();
 	    for ( ; it != dbpaths->end(); ++it )
 		widgetPluginManager->addLibraryPath( *it );
 	}
diff --git a/pyuic3/widgetdatabase.h b/pyuic3/widgetdatabase.h
index b44ef88..10685ad 100644
--- a/pyuic3/widgetdatabase.h
+++ b/pyuic3/widgetdatabase.h
@@ -1,15 +1,15 @@
 /**********************************************************************
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
-** Licensees holding valid Qt Enterprise Edition or Qt Professional Edition
-** licenses may use this file in accordance with the Qt Commercial License
+** Licensees holding valid TQt Enterprise Edition or TQt Professional Edition
+** licenses may use this file in accordance with the TQt Commercial License
 ** Agreement provided with the Software.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
@@ -17,7 +17,7 @@
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 ** See http://www.trolltech.com/pricing.html or email sales@trolltech.com for
-**   information about Qt Commercial License Agreements.
+**   information about TQt Commercial License Agreements.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
@@ -33,22 +33,22 @@
 #include <private/qpluginmanager_p.h>
 
 
-extern QPluginManager<WidgetInterface> *widgetManager();
+extern TQPluginManager<WidgetInterface> *widgetManager();
 
 struct WidgetDatabaseRecord
 {
     WidgetDatabaseRecord();
     ~WidgetDatabaseRecord();
-    QString iconSet, name, group, toolTip, whatsThis, includeFile;
+    TQString iconSet, name, group, toolTip, whatsThis, includeFile;
     uint isContainer : 1;
     uint isForm : 1;
     uint isCommon : 1;
     uint isPlugin : 1;
-    QIconSet *icon;
+    TQIconSet *icon;
     int nameCounter;
 };
 
-class WidgetDatabase : public Qt
+class WidgetDatabase : public TQt
 {
 public:
     WidgetDatabase();
@@ -58,38 +58,38 @@ public:
     static int count();
     static int startCustom();
 
-    static QIconSet iconSet( int id );
-    static QString className( int id );
-    static QString group( int id );
-    static QString toolTip( int id );
-    static QString whatsThis( int id );
-    static QString includeFile( int id );
+    static TQIconSet iconSet( int id );
+    static TQString className( int id );
+    static TQString group( int id );
+    static TQString toolTip( int id );
+    static TQString whatsThis( int id );
+    static TQString includeFile( int id );
     static bool isForm( int id );
     static bool isContainer( int id );
     static bool isCommon( int id );
 
-    static int idFromClassName( const QString &name );
-    static QString createWidgetName( int id );
+    static int idFromClassName( const TQString &name );
+    static TQString createWidgetName( int id );
 
     static WidgetDatabaseRecord *at( int index );
     static void insert( int index, WidgetDatabaseRecord *r );
     static void append( WidgetDatabaseRecord *r );
 
-    static QString widgetGroup( const QString &g );
-    static QString widgetGroup( int i );
+    static TQString widgetGroup( const TQString &g );
+    static TQString widgetGroup( int i );
     static int numWidgetGroups();
-    static bool isGroupVisible( const QString &g );
-    static bool isGroupEmpty( const QString &grp );
+    static bool isGroupVisible( const TQString &g );
+    static bool isGroupEmpty( const TQString &grp );
 
     static int addCustomWidget( WidgetDatabaseRecord *r );
     static bool isCustomWidget( int id );
     static bool isCustomPluginWidget( int id );
 
     static bool isWhatsThisLoaded();
-    static void loadWhatsThis( const QString &docPath );
+    static void loadWhatsThis( const TQString &docPath );
 
-    static bool hasWidget( const QString &name );
-    static void customWidgetClassNameChanged( const QString &oldName, const QString &newName );
+    static bool hasWidget( const TQString &name );
+    static void customWidgetClassNameChanged( const TQString &oldName, const TQString &newName );
 
 };
 
diff --git a/pyuic3/widgetinterface.h b/pyuic3/widgetinterface.h
index bf6bcd5..50f8e6d 100644
--- a/pyuic3/widgetinterface.h
+++ b/pyuic3/widgetinterface.h
@@ -1,7 +1,7 @@
  /**********************************************************************
 ** Copyright (C) 2000-2001 Trolltech AS.  All rights reserved.
 **
-** This file is part of Qt Designer.
+** This file is part of TQt Designer.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
@@ -23,7 +23,7 @@
 
 #include <private/qwidgetinterface_p.h>
 
-#define WidgetInterface QWidgetFactoryInterface
+#define WidgetInterface TQWidgetFactoryInterface
 #define IID_Widget IID_QWidgetFactory
 
 #endif