Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 1058 insertions, 1509 deletions

diff --git a/tde-i18n-bs/messages/tdebase/ksysguard.po b/tde-i18n-bs/messages/tdebase/ksysguard.po
index 05c2bf3b733..618e0bfc585 100644
--- a/tde-i18n-bs/messages/tdebase/ksysguard.po
+++ b/tde-i18n-bs/messages/tdebase/ksysguard.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2014-11-05 10:15-0600\n"
+"POT-Creation-Date: 2018-12-06 20:16+0100\n"
 "PO-Revision-Date: 2006-02-11 20:01+0100\n"
 "Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
 "Language-Team: Bosnian <lokal@linux.org.ba>\n"
@@ -17,1709 +17,1258 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.10.2\n"
 
-#: KSysGuardApplet.cc:209 WorkSheet.cc:331
-msgid "Select Display Type"
-msgstr "Odaberite vrstu pokazivača"
+#: SystemLoad.sgrd:5
+msgid "CPU Load"
+msgstr "CPU Load"
 
-#: KSysGuardApplet.cc:210 WorkSheet.cc:332
-msgid "&Signal Plotter"
-msgstr "&Ploter signala"
+#: SystemLoad.sgrd:10
+msgid "Load Average (1 min)"
+msgstr "Prosječno opterećenje (1 min)"
 
-#: KSysGuardApplet.cc:211 WorkSheet.cc:333
-msgid "&Multimeter"
-msgstr "&Multimetar"
+#: SystemLoad.sgrd:13
+msgid "Physical Memory"
+msgstr "Fizička memorija"
 
-#: KSysGuardApplet.cc:212
-msgid "&Dancing Bars"
-msgstr "P&lešuće trake"
+#: SystemLoad.sgrd:21
+msgid "Swap Memory"
+msgstr "Swap memorija"
 
-#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
-msgid ""
-"The KSysGuard applet does not support displaying of this type of sensor. Please "
-"choose another sensor."
-msgstr ""
-"KSysGuard ne podržava prikaz ove vrste senzora. Molim odaberite drugi senzor."
+#: KSysGuardApplet.xml:5
+msgid "CPU"
+msgstr "CPU"
 
-#: KSysGuardApplet.cc:318 WorkSheet.cc:94
-#, c-format
-msgid "Cannot open the file %1."
-msgstr "Ne mogu otvoriti datoteku %1."
+#: KSysGuardApplet.xml:10
+msgid "Mem"
+msgstr "Mem"
 
-#: KSysGuardApplet.cc:327 WorkSheet.cc:102
-msgid "The file %1 does not contain valid XML."
-msgstr "Datoteka %1 ne sadrži ispravan XML"
+#~ msgid "Select Display Type"
+#~ msgstr "Odaberite vrstu pokazivača"
 
-#: KSysGuardApplet.cc:334
-msgid ""
-"The file %1 does not contain a valid applet definition, which must have a "
-"document type 'KSysGuardApplet'."
-msgstr ""
-"Datoteka %1 ne sadrži ispravan opis applet-a, koji mora biti dokument tipa "
-"'KSysGuardApplet'."
-
-#: KSysGuardApplet.cc:476 WorkSheet.cc:225
-#, c-format
-msgid "Cannot save file %1"
-msgstr "Ne mogu snimiti datoteku %1"
-
-#: KSysGuardApplet.cc:488
-msgid "Drag sensors from the TDE System Guard into this cell."
-msgstr "Dovucite senzore sa TDE System Guard-a na ovo mjesto."
-
-#: SensorDisplayLib/MultiMeterSettings.cc:26
-msgid "Multimeter Settings"
-msgstr "Postavke multimetra"
-
-#: SensorDisplayLib/ProcessController.cc:54
-msgid "Name"
-msgstr "Ime"
-
-#: SensorDisplayLib/ProcessController.cc:55
-msgid "PID"
-msgstr "PID"
-
-#: SensorDisplayLib/ProcessController.cc:56
-msgid "PPID"
-msgstr "PPID"
-
-#: SensorDisplayLib/ProcessController.cc:57
-msgid "UID"
-msgstr "UID"
-
-#: SensorDisplayLib/ProcessController.cc:58
-msgid "GID"
-msgstr "GID"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:170
-#: SensorDisplayLib/FancyPlotterSettings.cc:234
-#: SensorDisplayLib/ProcessController.cc:59
-msgid "Status"
-msgstr "Status"
-
-#: SensorDisplayLib/ProcessController.cc:60
-#, c-format
-msgid "User%"
-msgstr "Korisnik%"
-
-#: SensorDisplayLib/ProcessController.cc:61
-#, c-format
-msgid "System%"
-msgstr "Sistem%"
-
-#: SensorDisplayLib/ProcessController.cc:62
-#: SensorDisplayLib/ProcessList.cc:783
-msgid "Nice"
-msgstr "Nice"
-
-#: SensorDisplayLib/ProcessController.cc:63
-msgid "VmSize"
-msgstr "VmSize"
-
-#: SensorDisplayLib/ProcessController.cc:64
-msgid "VmRss"
-msgstr "VmRss"
-
-#: SensorDisplayLib/ProcessController.cc:65
-msgid "Login"
-msgstr "Login"
-
-#: SensorDisplayLib/ProcessController.cc:66
-msgid "Command"
-msgstr "Naredba"
-
-#: SensorDisplayLib/ProcessController.cc:97
-msgid "All Processes"
-msgstr "Svi procesi"
-
-#: SensorDisplayLib/ProcessController.cc:98
-msgid "System Processes"
-msgstr "Sistemski procesi"
-
-#: SensorDisplayLib/ProcessController.cc:99
-msgid "User Processes"
-msgstr "Korisnički procesi"
-
-#: SensorDisplayLib/ProcessController.cc:100
-msgid "Own Processes"
-msgstr "Vlastiti procesi"
-
-#: SensorDisplayLib/ProcessController.cc:103
-msgid "&Tree"
-msgstr "S&tablo"
-
-#: SensorDisplayLib/ProcessController.cc:116
-msgid "&Refresh"
-msgstr "&Osvježi"
-
-#: SensorDisplayLib/ProcessController.cc:123
-msgid "&Kill"
-msgstr "&Ubij"
-
-#: SensorDisplayLib/ProcessController.cc:206
-msgid "%1: Running Processes"
-msgstr "%1: pokrenutih procesa"
-
-#: SensorDisplayLib/ProcessController.cc:239
-msgid "You need to select a process first."
-msgstr "Prvo morate izabrati proces."
-
-#: SensorDisplayLib/ProcessController.cc:245
-#, c-format
-msgid ""
-"_n: Do you want to kill the selected process?\n"
-"Do you want to kill the %n selected processes?"
-msgstr ""
-"Da li želite ubiti %n izabrani proces?\n"
-"Da li želite ubiti %n izabrana procesa?\n"
-"Da li želite ubiti %n izabranih procesa?"
-
-#: SensorDisplayLib/ProcessController.cc:248
-msgid "Kill Process"
-msgstr "Ubij proces"
-
-#: SensorDisplayLib/ProcessController.cc:252
-msgid "Kill"
-msgstr "Ubij"
-
-#: SensorDisplayLib/ProcessController.cc:258
-msgid "Do not ask again"
-msgstr "Ne pitaj više"
-
-#: SensorDisplayLib/ProcessController.cc:344
-#, c-format
-msgid "Error while attempting to kill process %1."
-msgstr "Greška pri pokušaju ubijanja procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:349
-#, c-format
-msgid "Insufficient permissions to kill process %1."
-msgstr "Nedovoljne privilegije za ubijanje procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:354
-#: SensorDisplayLib/ProcessController.cc:389
-msgid "Process %1 has already disappeared."
-msgstr "Proces %1 je već nestao."
-
-#: SensorDisplayLib/ProcessController.cc:358
-msgid "Invalid Signal."
-msgstr "Neispravan signal."
-
-#: SensorDisplayLib/ProcessController.cc:379
-#, c-format
-msgid "Error while attempting to renice process %1."
-msgstr "Greška pri pokušaju renice-a procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:384
-#, c-format
-msgid "Insufficient permissions to renice process %1."
-msgstr "Nedovoljne privilegije za renice procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:393
-msgid "Invalid argument."
-msgstr "Neispravan argument."
-
-#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
-msgid "It is impossible to connect to '%1'."
-msgstr "Nije moguće spojiti se na '%1'."
-
-#: SensorDisplayLib/SensorDisplay.cc:162
-msgid "Launch &System Guard"
-msgstr "Pokreni &System Guard"
-
-#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
-msgid "&Properties"
-msgstr "&Postavke"
-
-#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
-msgid "&Remove Display"
-msgstr "&Ukloni pokazivač"
-
-#: SensorDisplayLib/SensorDisplay.cc:169
-msgid "&Setup Update Interval..."
-msgstr "&Podesi vrijeme osvježavanja..."
-
-#: SensorDisplayLib/SensorDisplay.cc:171
-msgid "&Continue Update"
-msgstr "&Nastavi obnavljanje"
-
-#: SensorDisplayLib/SensorDisplay.cc:173
-msgid "P&ause Update"
-msgstr "P&auziraj obnavljanje"
-
-#: SensorDisplayLib/SensorDisplay.cc:240
-msgid ""
-"<qt>"
-"<p>This is a sensor display. To customize a sensor display click and hold the "
-"right mouse button on either the frame or the display box and select the <i>"
-"Properties</i> entry from the popup menu. Select <i>Remove</i> "
-"to delete the display from the worksheet.</p>%1</qt>"
-msgstr ""
-"<qt>"
-"<p>Ovo je prikaz senzora. Da biste podesili prikaz senzora, kliknite i držite "
-"desno dugme miša na ili okvir ili kocku sa prikazom i odaberite stavku <i>"
-"Osobine</i> sa menija. Izaberite <i>Ukloni</i> ako želite obrisati prikaz sa "
-"radnog lista.</p>%1</qt>"
+#~ msgid "&Signal Plotter"
+#~ msgstr "&Ploter signala"
 
-#: SensorDisplayLib/DummyDisplay.cc:33
-msgid "Drop Sensor Here"
-msgstr "Ovdje ispustite senzor"
+#~ msgid "&Multimeter"
+#~ msgstr "&Multimetar"
 
-#: SensorDisplayLib/DummyDisplay.cc:38
-msgid ""
-"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
-"and drop it here. A sensor display will appear that allows you to monitor the "
-"values of the sensor over time."
-msgstr ""
-"Ovo je slobodan prostor na radnom listu. Povucite senzor sa Preglednika senzora "
-"i ispustite ga ovdje. Pojaviće se pokazivač senzora pomoću kojeg možete pratiti "
-"vrijednosti senzora kroz vrijeme."
+#~ msgid "&Dancing Bars"
+#~ msgstr "P&lešuće trake"
 
-#: SensorDisplayLib/SensorLoggerSettings.cc:26
-msgid "Sensor Logger Settings"
-msgstr "Postavke dnevnika senzora"
+#~ msgid ""
+#~ "The KSysGuard applet does not support displaying of this type of sensor. "
+#~ "Please choose another sensor."
+#~ msgstr ""
+#~ "KSysGuard ne podržava prikaz ove vrste senzora. Molim odaberite drugi "
+#~ "senzor."
 
-#: SensorDisplayLib/SensorLogger.cc:136
-msgid "Logging"
-msgstr "Vođenje dnevnika"
+#~ msgid "Cannot open the file %1."
+#~ msgstr "Ne mogu otvoriti datoteku %1."
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
-#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:129
-#, no-c-format
-msgid "Timer Interval"
-msgstr "Vremenski razmak"
+#~ msgid "The file %1 does not contain valid XML."
+#~ msgstr "Datoteka %1 ne sadrži ispravan XML"
 
-#: SensorDisplayLib/SensorLogger.cc:138
-msgid "Sensor Name"
-msgstr "Ime senzora"
+#~ msgid ""
+#~ "The file %1 does not contain a valid applet definition, which must have a "
+#~ "document type 'KSysGuardApplet'."
+#~ msgstr ""
+#~ "Datoteka %1 ne sadrži ispravan opis applet-a, koji mora biti dokument "
+#~ "tipa 'KSysGuardApplet'."
 
-#: SensorDisplayLib/SensorLogger.cc:139
-msgid "Host Name"
-msgstr "Ime računara"
+#~ msgid "Cannot save file %1"
+#~ msgstr "Ne mogu snimiti datoteku %1"
 
-#: SensorDisplayLib/SensorLogger.cc:140
-msgid "Log File"
-msgstr "Dnevnik"
+#~ msgid "Drag sensors from the TDE System Guard into this cell."
+#~ msgstr "Dovucite senzore sa TDE System Guard-a na ovo mjesto."
 
-#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
-msgid "Sensor Logger"
-msgstr "Dnevnik senzora"
+#~ msgid "Multimeter Settings"
+#~ msgstr "Postavke multimetra"
 
-#: SensorDisplayLib/SensorLogger.cc:383
-msgid "&Remove Sensor"
-msgstr "&Ukloni senzor"
+#~ msgid "Name"
+#~ msgstr "Ime"
 
-#: SensorDisplayLib/SensorLogger.cc:384
-msgid "&Edit Sensor..."
-msgstr "&Izmjeni senzor..."
+#~ msgid "PID"
+#~ msgstr "PID"
 
-#: SensorDisplayLib/SensorLogger.cc:396
-msgid "St&op Logging"
-msgstr "Prekini &zapisivanje u dnevnk"
+#~ msgid "PPID"
+#~ msgstr "PPID"
 
-#: SensorDisplayLib/SensorLogger.cc:398
-msgid "S&tart Logging"
-msgstr "Počni &vođenje dnevnika"
+#~ msgid "UID"
+#~ msgstr "UID"
 
-#: SensorDisplayLib/ProcessList.cc:110
-msgid ""
-"_: process status\n"
-"running"
-msgstr "aktivan"
+#~ msgid "GID"
+#~ msgstr "GID"
 
-#: SensorDisplayLib/ProcessList.cc:112
-msgid ""
-"_: process status\n"
-"sleeping"
-msgstr "spava"
+#~ msgid "Status"
+#~ msgstr "Status"
 
-#: SensorDisplayLib/ProcessList.cc:114
-msgid ""
-"_: process status\n"
-"disk sleep"
-msgstr "spava na disku"
+#~ msgid "User%"
+#~ msgstr "Korisnik%"
 
-#: SensorDisplayLib/ProcessList.cc:115
-msgid ""
-"_: process status\n"
-"zombie"
-msgstr "zombi"
+#~ msgid "System%"
+#~ msgstr "Sistem%"
 
-#: SensorDisplayLib/ProcessList.cc:117
-msgid ""
-"_: process status\n"
-"stopped"
-msgstr "zaustavljen"
+#~ msgid "Nice"
+#~ msgstr "Nice"
 
-#: SensorDisplayLib/ProcessList.cc:118
-msgid ""
-"_: process status\n"
-"paging"
-msgstr "na stranici"
+#~ msgid "VmSize"
+#~ msgstr "VmSize"
 
-#: SensorDisplayLib/ProcessList.cc:119
-msgid ""
-"_: process status\n"
-"idle"
-msgstr "čeka"
+#~ msgid "VmRss"
+#~ msgstr "VmRss"
 
-#: SensorDisplayLib/ProcessList.cc:259
-msgid "Remove Column"
-msgstr "Ukloni kolonu"
+#~ msgid "Login"
+#~ msgstr "Login"
 
-#: SensorDisplayLib/ProcessList.cc:260
-msgid "Add Column"
-msgstr "Dodaj kolonu"
+#~ msgid "Command"
+#~ msgstr "Naredba"
 
-#: SensorDisplayLib/ProcessList.cc:261
-msgid "Help on Column"
-msgstr "Pomoć o koloni"
+#~ msgid "All Processes"
+#~ msgstr "Svi procesi"
 
-#: SensorDisplayLib/ProcessList.cc:788
-msgid "Hide Column"
-msgstr "Sakrij kolonu"
+#~ msgid "System Processes"
+#~ msgstr "Sistemski procesi"
 
-#: SensorDisplayLib/ProcessList.cc:794
-msgid "Show Column"
-msgstr "Prikaži kolonu"
+#~ msgid "User Processes"
+#~ msgstr "Korisnički procesi"
 
-#: SensorDisplayLib/ProcessList.cc:798
-msgid "Select All Processes"
-msgstr "Izaberi sve procese"
+#~ msgid "Own Processes"
+#~ msgstr "Vlastiti procesi"
 
-#: SensorDisplayLib/ProcessList.cc:799
-msgid "Unselect All Processes"
-msgstr "Odznači sve procese"
+#~ msgid "&Tree"
+#~ msgstr "S&tablo"
 
-#: SensorDisplayLib/ProcessList.cc:805
-msgid "Select All Child Processes"
-msgstr "Izaberi sve procese - djecu"
+#~ msgid "&Refresh"
+#~ msgstr "&Osvježi"
 
-#: SensorDisplayLib/ProcessList.cc:806
-msgid "Unselect All Child Processes"
-msgstr "Odznači sve procese - djecu"
+#~ msgid "&Kill"
+#~ msgstr "&Ubij"
 
-#: SensorDisplayLib/ProcessList.cc:808
-msgid "SIGABRT"
-msgstr "SIGABRT"
+#~ msgid "%1: Running Processes"
+#~ msgstr "%1: pokrenutih procesa"
 
-#: SensorDisplayLib/ProcessList.cc:809
-msgid "SIGALRM"
-msgstr "SIGALRM"
+#~ msgid "You need to select a process first."
+#~ msgstr "Prvo morate izabrati proces."
 
-#: SensorDisplayLib/ProcessList.cc:810
-msgid "SIGCHLD"
-msgstr "SIGCHLD"
+#~ msgid ""
+#~ "_n: Do you want to kill the selected process?\n"
+#~ "Do you want to kill the %n selected processes?"
+#~ msgstr ""
+#~ "Da li želite ubiti %n izabrani proces?\n"
+#~ "Da li želite ubiti %n izabrana procesa?\n"
+#~ "Da li želite ubiti %n izabranih procesa?"
 
-#: SensorDisplayLib/ProcessList.cc:811
-msgid "SIGCONT"
-msgstr "SIGCONT"
+#~ msgid "Kill Process"
+#~ msgstr "Ubij proces"
 
-#: SensorDisplayLib/ProcessList.cc:812
-msgid "SIGFPE"
-msgstr "SIGFPE"
+#~ msgid "Kill"
+#~ msgstr "Ubij"
 
-#: SensorDisplayLib/ProcessList.cc:813
-msgid "SIGHUP"
-msgstr "SIGHUP"
+#~ msgid "Do not ask again"
+#~ msgstr "Ne pitaj više"
 
-#: SensorDisplayLib/ProcessList.cc:814
-msgid "SIGILL"
-msgstr "SIGILL"
+#~ msgid "Error while attempting to kill process %1."
+#~ msgstr "Greška pri pokušaju ubijanja procesa %1."
 
-#: SensorDisplayLib/ProcessList.cc:815
-msgid "SIGINT"
-msgstr "SIGINT"
+#~ msgid "Insufficient permissions to kill process %1."
+#~ msgstr "Nedovoljne privilegije za ubijanje procesa %1."
 
-#: SensorDisplayLib/ProcessList.cc:816
-msgid "SIGKILL"
-msgstr "SIGKILL"
+#~ msgid "Process %1 has already disappeared."
+#~ msgstr "Proces %1 je već nestao."
 
-#: SensorDisplayLib/ProcessList.cc:817
-msgid "SIGPIPE"
-msgstr "SIGPIPE"
+#~ msgid "Invalid Signal."
+#~ msgstr "Neispravan signal."
 
-#: SensorDisplayLib/ProcessList.cc:818
-msgid "SIGQUIT"
-msgstr "SIGQUIT"
+#~ msgid "Error while attempting to renice process %1."
+#~ msgstr "Greška pri pokušaju renice-a procesa %1."
 
-#: SensorDisplayLib/ProcessList.cc:819
-msgid "SIGSEGV"
-msgstr "SIGSEGV"
+#~ msgid "Insufficient permissions to renice process %1."
+#~ msgstr "Nedovoljne privilegije za renice procesa %1."
 
-#: SensorDisplayLib/ProcessList.cc:820
-msgid "SIGSTOP"
-msgstr "SIGSTOP"
+#~ msgid "Invalid argument."
+#~ msgstr "Neispravan argument."
 
-#: SensorDisplayLib/ProcessList.cc:821
-msgid "SIGTERM"
-msgstr "SIGTERM"
+#~ msgid "It is impossible to connect to '%1'."
+#~ msgstr "Nije moguće spojiti se na '%1'."
 
-#: SensorDisplayLib/ProcessList.cc:822
-msgid "SIGTSTP"
-msgstr "SIGTSTP"
+#~ msgid "Launch &System Guard"
+#~ msgstr "Pokreni &System Guard"
 
-#: SensorDisplayLib/ProcessList.cc:823
-msgid "SIGTTIN"
-msgstr "SIGTTIN"
+#~ msgid "&Properties"
+#~ msgstr "&Postavke"
 
-#: SensorDisplayLib/ProcessList.cc:824
-msgid "SIGTTOU"
-msgstr "SIGTTOU"
+#~ msgid "&Remove Display"
+#~ msgstr "&Ukloni pokazivač"
 
-#: SensorDisplayLib/ProcessList.cc:825
-msgid "SIGUSR1"
-msgstr "SIGUSR1"
+#~ msgid "&Setup Update Interval..."
+#~ msgstr "&Podesi vrijeme osvježavanja..."
 
-#: SensorDisplayLib/ProcessList.cc:826
-msgid "SIGUSR2"
-msgstr "SIGUSR2"
+#~ msgid "&Continue Update"
+#~ msgstr "&Nastavi obnavljanje"
 
-#: SensorDisplayLib/ProcessList.cc:829
-msgid "Send Signal"
-msgstr "Pošalji signal"
+#~ msgid "P&ause Update"
+#~ msgstr "P&auziraj obnavljanje"
 
-#: SensorDisplayLib/ProcessList.cc:837
-msgid "Renice Process..."
-msgstr "Renice procesa..."
+#~ msgid ""
+#~ "<qt><p>This is a sensor display. To customize a sensor display click and "
+#~ "hold the right mouse button on either the frame or the display box and "
+#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
+#~ "i> to delete the display from the worksheet.</p>%1</qt>"
+#~ msgstr ""
+#~ "<qt><p>Ovo je prikaz senzora. Da biste podesili prikaz senzora, kliknite "
+#~ "i držite desno dugme miša na ili okvir ili kocku sa prikazom i odaberite "
+#~ "stavku <i>Osobine</i> sa menija. Izaberite <i>Ukloni</i> ako želite "
+#~ "obrisati prikaz sa radnog lista.</p>%1</qt>"
 
-#: SensorDisplayLib/ProcessList.cc:885
-msgid ""
-"_n: Do you really want to send signal %1 to the selected process?\n"
-"Do you really want to send signal %1 to the %n selected processes?"
-msgstr ""
-"Da li stvarno želite poslati signal %1 za %n izabrani proces?\n"
-"Da li stvarno želite poslati signal %1 za %n izabrana procesa?\n"
-"Da li stvarno želite poslati signal %1 za %n izabranih procesa?"
+#~ msgid "Drop Sensor Here"
+#~ msgstr "Ovdje ispustite senzor"
 
-#: SensorDisplayLib/ProcessList.cc:889
-msgid "Send"
-msgstr "Pošalji"
+#~ msgid ""
+#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
+#~ "Browser and drop it here. A sensor display will appear that allows you to "
+#~ "monitor the values of the sensor over time."
+#~ msgstr ""
+#~ "Ovo je slobodan prostor na radnom listu. Povucite senzor sa Preglednika "
+#~ "senzora i ispustite ga ovdje. Pojaviće se pokazivač senzora pomoću kojeg "
+#~ "možete pratiti vrijednosti senzora kroz vrijeme."
 
-#: SensorDisplayLib/ReniceDlg.cc:32
-msgid "Renice Process"
-msgstr "Renice procesa"
+#~ msgid "Sensor Logger Settings"
+#~ msgstr "Postavke dnevnika senzora"
 
-#: SensorDisplayLib/ReniceDlg.cc:40
-msgid ""
-"You are about to change the scheduling priority of\n"
-"process %1. Be aware that only the Superuser (root)\n"
-"can decrease the nice level of a process. The lower\n"
-"the number is the higher the priority.\n"
-"\n"
-"Please enter the desired nice level:"
-msgstr ""
-"Upravo ćete promjeniti raspored prioriteta procesa\n"
-"%1. Imajte na umu da samo administrator (root) može\n"
-"smanjiti 'nice' nivo procesa. Što je niži 'nice', to je veći \n"
-"prioritet procesa.\n"
-"\n"
-"Molim unesite željeni 'nice' nivo:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
-#: SensorDisplayLib/LogFile.cc:88 rc.cpp:27
-#, no-c-format
-msgid "Foreground color:"
-msgstr "Boja teksta:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 102
-#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
-#: ksgrd/StyleSettings.cc:68 rc.cpp:30 rc.cpp:69 rc.cpp:123 rc.cpp:171
-#, no-c-format
-msgid "Background color:"
-msgstr "Boja pozadine:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:43
-msgid "Edit BarGraph Preferences"
-msgstr "Izmjeni postavke bar grafa"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:47
-msgid "Range"
-msgstr "Opseg"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 46
-#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
-#: rc.cpp:21 rc.cpp:60 rc.cpp:75 rc.cpp:159
-#, no-c-format
-msgid "Title"
-msgstr "Naslov"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
-#: SensorDisplayLib/DancingBarsSettings.cc:54
-#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:78
-#, no-c-format
-msgid "Enter the title of the display here."
-msgstr "Unesite naslov pokazivača."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:59
-msgid "Display Range"
-msgstr "Opseg pokazivača"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:63
-#: SensorDisplayLib/FancyPlotterSettings.cc:89
-msgid "Minimum value:"
-msgstr "Minimalna vrijednost:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:67
-#: SensorDisplayLib/FancyPlotterSettings.cc:95
-msgid ""
-"Enter the minimum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Unesite najmanju vrijednost pokazivača. Ako su obje vrijednosti 0, tada će se "
-"automatski određivati opseg."
+#~ msgid "Logging"
+#~ msgstr "Vođenje dnevnika"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:71
-#: SensorDisplayLib/FancyPlotterSettings.cc:99
-msgid "Maximum value:"
-msgstr "Maksimalna vrijednost:"
+#~ msgid "Timer Interval"
+#~ msgstr "Vremenski razmak"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:75
-#: SensorDisplayLib/FancyPlotterSettings.cc:105
-msgid ""
-"Enter the maximum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Unesite najveću vrijednost pokazivača. Ako su obje vrijednosti 0, tada će se "
-"automatski određivati opseg."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
-#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:87
-#, no-c-format
-msgid "Alarms"
-msgstr "Alarmi"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 138
-#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:102 rc.cpp:135
-#, no-c-format
-msgid "Alarm for Minimum Value"
-msgstr "Alarm za minimalnu vrijednost"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:91
-#: SensorDisplayLib/DancingBarsSettings.cc:109
-msgid "Enable alarm"
-msgstr "Uključi alarm"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 152
-#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:108 rc.cpp:141
-#, no-c-format
-msgid "Enable the minimum value alarm."
-msgstr "Uključi alarm za najmanju vrijedost."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 180
-#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:111 rc.cpp:144
-#, no-c-format
-msgid "Lower limit:"
-msgstr "Donja granica:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 72
-#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:90 rc.cpp:147
-#, no-c-format
-msgid "Alarm for Maximum Value"
-msgstr "Alarm za maksimalnu vrijednost"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 86
-#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:96 rc.cpp:153
-#, no-c-format
-msgid "Enable the maximum value alarm."
-msgstr "Uključi alarm za najveću vrijedost."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 114
-#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:99 rc.cpp:156
-#, no-c-format
-msgid "Upper limit:"
-msgstr "Gornja granica:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:126
-msgid "Look"
-msgstr "Pogled"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:129
-msgid "Normal bar color:"
-msgstr "Obična boja trake:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:136
-msgid "Out-of-range color:"
-msgstr "Boja za prekoračenje:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:150
-#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
-msgid "Font size:"
-msgstr "Veličina slova:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:154
-msgid ""
-"This determines the size of the font used to print a label underneath the bars. "
-"Bars are automatically suppressed if text becomes too large, so it is advisable "
-"to use a small font size here."
-msgstr ""
-"Ovdje se određuje veličina fonta kojim će se ispisivati oznake ispod traka. "
-"Veličina trake će biti smanjena ukoliko je tekst prevelik, pa je bolje ne "
-"pretjerati s veličinom slova."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:161
-#: SensorDisplayLib/FancyPlotterSettings.cc:224
-msgid "Sensors"
-msgstr "Senzori"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:166
-#: SensorDisplayLib/FancyPlotterSettings.cc:231
-msgid "Host"
-msgstr "Računar"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:167
-#: SensorDisplayLib/FancyPlotterSettings.cc:232
-msgid "Sensor"
-msgstr "Senzor"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:168
-msgid "Label"
-msgstr "Oznaka"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:169
-#: SensorDisplayLib/FancyPlotterSettings.cc:233
-msgid "Unit"
-msgstr "Jedinica"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:174
-msgid "Edit..."
-msgstr "Izmjeni..."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:176
-msgid "Push this button to configure the label."
-msgstr "Pritnisnite ovo dugme da podesite naslov."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:181
-#: SensorDisplayLib/FancyPlotterSettings.cc:249
-msgid "Push this button to delete the sensor."
-msgstr "Pritnisnite ovo dugme za brisanje senzora."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:356
-msgid "Label of Bar Graph"
-msgstr "Naslov bar grafa"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:357
-msgid "Enter new label:"
-msgstr "Unesite novu oznaku:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:47
-msgid "Signal Plotter Settings"
-msgstr "Postavke plotera signala"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:57
-msgid "Style"
-msgstr "Stil"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:60
-msgid "Title:"
-msgstr "Naslov:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:69
-msgid "Graph Drawing Style"
-msgstr "Stil crtanja krivulje"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:71
-msgid "Basic polygons"
-msgstr "Osnovni poligoni"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:73
-msgid "Original - single line per data point"
-msgstr "Original - jedna linija za jednu tačku"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:78
-msgid "Scales"
-msgstr "Stepenice"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:81
-msgid "Vertical Scale"
-msgstr "Uspravna skala"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:85
-msgid "Automatic range detection"
-msgstr "Automatsko određivanje opsega"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:86
-msgid ""
-"Check this box if you want the display range to adapt dynamically to the "
-"currently displayed values; if you do not check this, you have to specify the "
-"range you want in the fields below."
-msgstr ""
-"Uključite ovu opciju ako želite automatsko prilagođavanje opsega prema "
-"trenutnim vrijednostima, u suprotnom trebate unijeti opseg koji želite u "
-"poljima ispod."
+#~ msgid "Sensor Name"
+#~ msgstr "Ime senzora"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:111
-msgid "Horizontal Scale"
-msgstr "Vodoravna skala"
+#~ msgid "Host Name"
+#~ msgstr "Ime računara"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:120
-msgid "pixel(s) per time period"
-msgstr "piksela po jedinici vremena"
+#~ msgid "Log File"
+#~ msgstr "Dnevnik"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:126
-msgid "Grid"
-msgstr "Mreža"
+#~ msgid "Sensor Logger"
+#~ msgstr "Dnevnik senzora"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:129
-msgid "Lines"
-msgstr "Linije"
+#~ msgid "&Remove Sensor"
+#~ msgstr "&Ukloni senzor"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:133
-msgid "Vertical lines"
-msgstr "Uspravne linije"
+#~ msgid "&Edit Sensor..."
+#~ msgstr "&Izmjeni senzor..."
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:134
-msgid "Check this to activate the vertical lines if display is large enough."
-msgstr ""
-"Uključite ovo da aktivirate vertikalne linije ako je prikaz dovoljno velik."
+#~ msgid "St&op Logging"
+#~ msgstr "Prekini &zapisivanje u dnevnk"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:137
-msgid "Distance:"
-msgstr "Razmak:"
+#~ msgid "S&tart Logging"
+#~ msgstr "Počni &vođenje dnevnika"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:143
-msgid "Enter the distance between two vertical lines here."
-msgstr "Unesite razmak između dvije uspravne linije."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "running"
+#~ msgstr "aktivan"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:147
-msgid "Vertical lines scroll"
-msgstr "Skrolovanje uspravnih linija"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "sleeping"
+#~ msgstr "spava"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:150
-msgid "Horizontal lines"
-msgstr "Vodoravne linije"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "disk sleep"
+#~ msgstr "spava na disku"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:151
-msgid "Check this to enable horizontal lines if display is large enough."
-msgstr ""
-"Ovdje možete omogućiti prikaz vodoravnim trakama ako je prikaz dovoljno velik."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "zombie"
+#~ msgstr "zombi"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:154
-msgid "Count:"
-msgstr "Broj:"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "stopped"
+#~ msgstr "zaustavljen"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:160
-msgid "Enter the number of horizontal lines here."
-msgstr "Unesite broj vodoravnih linija."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "paging"
+#~ msgstr "na stranici"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
-#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:18
-#, no-c-format
-msgid "Text"
-msgstr "Tekst"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "idle"
+#~ msgstr "čeka"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:172
-msgid "Labels"
-msgstr "Oznake"
+#~ msgid "Remove Column"
+#~ msgstr "Ukloni kolonu"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:173
-msgid ""
-"Check this box if horizontal lines should be decorated with the values they "
-"mark."
-msgstr ""
-"Ovdje možete omogućiti hoće li vodoravne linije biti ukrašene vrijednostima "
-"koje pokazuju."
+#~ msgid "Add Column"
+#~ msgstr "Dodaj kolonu"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:185
-msgid "Top bar"
-msgstr " Gornja traka"
+#~ msgid "Help on Column"
+#~ msgstr "Pomoć o koloni"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:186
-msgid ""
-"Check this to active the display title bar. This is probably only useful for "
-"applet displays. The bar is only visible if the display is large enough."
-msgstr ""
-"Ovdje možete uključiti traku s nazivom, što je vjerovatno korisno smo kod "
-"prikazivanja appleta, jer je traka vidljiva samo ako je prikaz dovoljno velik."
+#~ msgid "Hide Column"
+#~ msgstr "Sakrij kolonu"
+
+#~ msgid "Show Column"
+#~ msgstr "Prikaži kolonu"
+
+#~ msgid "Select All Processes"
+#~ msgstr "Izaberi sve procese"
+
+#~ msgid "Unselect All Processes"
+#~ msgstr "Odznači sve procese"
+
+#~ msgid "Select All Child Processes"
+#~ msgstr "Izaberi sve procese - djecu"
+
+#~ msgid "Unselect All Child Processes"
+#~ msgstr "Odznači sve procese - djecu"
+
+#~ msgid "SIGABRT"
+#~ msgstr "SIGABRT"
+
+#~ msgid "SIGALRM"
+#~ msgstr "SIGALRM"
+
+#~ msgid "SIGCHLD"
+#~ msgstr "SIGCHLD"
+
+#~ msgid "SIGCONT"
+#~ msgstr "SIGCONT"
+
+#~ msgid "SIGFPE"
+#~ msgstr "SIGFPE"
+
+#~ msgid "SIGHUP"
+#~ msgstr "SIGHUP"
+
+#~ msgid "SIGILL"
+#~ msgstr "SIGILL"
+
+#~ msgid "SIGINT"
+#~ msgstr "SIGINT"
+
+#~ msgid "SIGKILL"
+#~ msgstr "SIGKILL"
+
+#~ msgid "SIGPIPE"
+#~ msgstr "SIGPIPE"
+
+#~ msgid "SIGQUIT"
+#~ msgstr "SIGQUIT"
+
+#~ msgid "SIGSEGV"
+#~ msgstr "SIGSEGV"
+
+#~ msgid "SIGSTOP"
+#~ msgstr "SIGSTOP"
+
+#~ msgid "SIGTERM"
+#~ msgstr "SIGTERM"
+
+#~ msgid "SIGTSTP"
+#~ msgstr "SIGTSTP"
+
+#~ msgid "SIGTTIN"
+#~ msgstr "SIGTTIN"
+
+#~ msgid "SIGTTOU"
+#~ msgstr "SIGTTOU"
+
+#~ msgid "SIGUSR1"
+#~ msgstr "SIGUSR1"
+
+#~ msgid "SIGUSR2"
+#~ msgstr "SIGUSR2"
+
+#~ msgid "Send Signal"
+#~ msgstr "Pošalji signal"
+
+#~ msgid "Renice Process..."
+#~ msgstr "Renice procesa..."
+
+#~ msgid ""
+#~ "_n: Do you really want to send signal %1 to the selected process?\n"
+#~ "Do you really want to send signal %1 to the %n selected processes?"
+#~ msgstr ""
+#~ "Da li stvarno želite poslati signal %1 za %n izabrani proces?\n"
+#~ "Da li stvarno želite poslati signal %1 za %n izabrana procesa?\n"
+#~ "Da li stvarno želite poslati signal %1 za %n izabranih procesa?"
+
+#~ msgid "Send"
+#~ msgstr "Pošalji"
+
+#~ msgid "Renice Process"
+#~ msgstr "Renice procesa"
+
+#~ msgid ""
+#~ "You are about to change the scheduling priority of\n"
+#~ "process %1. Be aware that only the Superuser (root)\n"
+#~ "can decrease the nice level of a process. The lower\n"
+#~ "the number is the higher the priority.\n"
+#~ "\n"
+#~ "Please enter the desired nice level:"
+#~ msgstr ""
+#~ "Upravo ćete promjeniti raspored prioriteta procesa\n"
+#~ "%1. Imajte na umu da samo administrator (root) može\n"
+#~ "smanjiti 'nice' nivo procesa. Što je niži 'nice', to je veći \n"
+#~ "prioritet procesa.\n"
+#~ "\n"
+#~ "Molim unesite željeni 'nice' nivo:"
+
+#~ msgid "Foreground color:"
+#~ msgstr "Boja teksta:"
+
+#~ msgid "Background color:"
+#~ msgstr "Boja pozadine:"
+
+#~ msgid "Edit BarGraph Preferences"
+#~ msgstr "Izmjeni postavke bar grafa"
+
+#~ msgid "Range"
+#~ msgstr "Opseg"
+
+#~ msgid "Title"
+#~ msgstr "Naslov"
+
+#~ msgid "Enter the title of the display here."
+#~ msgstr "Unesite naslov pokazivača."
+
+#~ msgid "Display Range"
+#~ msgstr "Opseg pokazivača"
+
+#~ msgid "Minimum value:"
+#~ msgstr "Minimalna vrijednost:"
+
+#~ msgid ""
+#~ "Enter the minimum value for the display here. If both values are 0, "
+#~ "automatic range detection is enabled."
+#~ msgstr ""
+#~ "Unesite najmanju vrijednost pokazivača. Ako su obje vrijednosti 0, tada "
+#~ "će se automatski određivati opseg."
+
+#~ msgid "Maximum value:"
+#~ msgstr "Maksimalna vrijednost:"
+
+#~ msgid ""
+#~ "Enter the maximum value for the display here. If both values are 0, "
+#~ "automatic range detection is enabled."
+#~ msgstr ""
+#~ "Unesite najveću vrijednost pokazivača. Ako su obje vrijednosti 0, tada će "
+#~ "se automatski određivati opseg."
+
+#~ msgid "Alarms"
+#~ msgstr "Alarmi"
+
+#~ msgid "Alarm for Minimum Value"
+#~ msgstr "Alarm za minimalnu vrijednost"
+
+#~ msgid "Enable alarm"
+#~ msgstr "Uključi alarm"
+
+#~ msgid "Enable the minimum value alarm."
+#~ msgstr "Uključi alarm za najmanju vrijedost."
+
+#~ msgid "Lower limit:"
+#~ msgstr "Donja granica:"
+
+#~ msgid "Alarm for Maximum Value"
+#~ msgstr "Alarm za maksimalnu vrijednost"
+
+#~ msgid "Enable the maximum value alarm."
+#~ msgstr "Uključi alarm za najveću vrijedost."
+
+#~ msgid "Upper limit:"
+#~ msgstr "Gornja granica:"
+
+#~ msgid "Look"
+#~ msgstr "Pogled"
+
+#~ msgid "Normal bar color:"
+#~ msgstr "Obična boja trake:"
+
+#~ msgid "Out-of-range color:"
+#~ msgstr "Boja za prekoračenje:"
+
+#~ msgid "Font size:"
+#~ msgstr "Veličina slova:"
+
+#~ msgid ""
+#~ "This determines the size of the font used to print a label underneath the "
+#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
+#~ "is advisable to use a small font size here."
+#~ msgstr ""
+#~ "Ovdje se određuje veličina fonta kojim će se ispisivati oznake ispod "
+#~ "traka. Veličina trake će biti smanjena ukoliko je tekst prevelik, pa je "
+#~ "bolje ne pretjerati s veličinom slova."
+
+#~ msgid "Sensors"
+#~ msgstr "Senzori"
+
+#~ msgid "Host"
+#~ msgstr "Računar"
+
+#~ msgid "Sensor"
+#~ msgstr "Senzor"
+
+#~ msgid "Label"
+#~ msgstr "Oznaka"
+
+#~ msgid "Unit"
+#~ msgstr "Jedinica"
+
+#~ msgid "Edit..."
+#~ msgstr "Izmjeni..."
+
+#~ msgid "Push this button to configure the label."
+#~ msgstr "Pritnisnite ovo dugme da podesite naslov."
+
+#~ msgid "Push this button to delete the sensor."
+#~ msgstr "Pritnisnite ovo dugme za brisanje senzora."
+
+#~ msgid "Label of Bar Graph"
+#~ msgstr "Naslov bar grafa"
+
+#~ msgid "Enter new label:"
+#~ msgstr "Unesite novu oznaku:"
+
+#~ msgid "Signal Plotter Settings"
+#~ msgstr "Postavke plotera signala"
+
+#~ msgid "Style"
+#~ msgstr "Stil"
+
+#~ msgid "Title:"
+#~ msgstr "Naslov:"
+
+#~ msgid "Graph Drawing Style"
+#~ msgstr "Stil crtanja krivulje"
+
+#~ msgid "Basic polygons"
+#~ msgstr "Osnovni poligoni"
+
+#~ msgid "Original - single line per data point"
+#~ msgstr "Original - jedna linija za jednu tačku"
+
+#~ msgid "Scales"
+#~ msgstr "Stepenice"
+
+#~ msgid "Vertical Scale"
+#~ msgstr "Uspravna skala"
+
+#~ msgid "Automatic range detection"
+#~ msgstr "Automatsko određivanje opsega"
+
+#~ msgid ""
+#~ "Check this box if you want the display range to adapt dynamically to the "
+#~ "currently displayed values; if you do not check this, you have to specify "
+#~ "the range you want in the fields below."
+#~ msgstr ""
+#~ "Uključite ovu opciju ako želite automatsko prilagođavanje opsega prema "
+#~ "trenutnim vrijednostima, u suprotnom trebate unijeti opseg koji želite u "
+#~ "poljima ispod."
+
+#~ msgid "Horizontal Scale"
+#~ msgstr "Vodoravna skala"
+
+#~ msgid "pixel(s) per time period"
+#~ msgstr "piksela po jedinici vremena"
+
+#~ msgid "Grid"
+#~ msgstr "Mreža"
+
+#~ msgid "Lines"
+#~ msgstr "Linije"
+
+#~ msgid "Vertical lines"
+#~ msgstr "Uspravne linije"
+
+#~ msgid ""
+#~ "Check this to activate the vertical lines if display is large enough."
+#~ msgstr ""
+#~ "Uključite ovo da aktivirate vertikalne linije ako je prikaz dovoljno "
+#~ "velik."
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 64
-#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:24 rc.cpp:63 rc.cpp:114
-#: rc.cpp:162
-#, no-c-format
-msgid "Colors"
-msgstr "Boje"
+#~ msgid "Distance:"
+#~ msgstr "Razmak:"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:196
-msgid "Vertical lines:"
-msgstr "Uspravne linije:"
+#~ msgid "Enter the distance between two vertical lines here."
+#~ msgstr "Unesite razmak između dvije uspravne linije."
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:203
-msgid "Horizontal lines:"
-msgstr "Vodoravne linije:"
+#~ msgid "Vertical lines scroll"
+#~ msgstr "Skrolovanje uspravnih linija"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:210
-msgid "Background:"
-msgstr "Pozadina:"
+#~ msgid "Horizontal lines"
+#~ msgstr "Vodoravne linije"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:242
-msgid "Set Color..."
-msgstr "Podesi boju..."
+#~ msgid "Check this to enable horizontal lines if display is large enough."
+#~ msgstr ""
+#~ "Ovdje možete omogućiti prikaz vodoravnim trakama ako je prikaz dovoljno "
+#~ "velik."
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:244
-msgid "Push this button to configure the color of the sensor in the diagram."
-msgstr "Pritisnite ovo dugme za podešavanje boje senzora u dijagramu."
+#~ msgid "Count:"
+#~ msgstr "Broj:"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:252
-msgid "Move Up"
-msgstr "Pomakni gore"
+#~ msgid "Enter the number of horizontal lines here."
+#~ msgstr "Unesite broj vodoravnih linija."
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:256
-msgid "Move Down"
-msgstr "Pomakni dole"
+#~ msgid "Text"
+#~ msgstr "Tekst"
 
-#: SensorDisplayLib/ListViewSettings.cc:26
-msgid "List View Settings"
-msgstr "Postavke prikaza liste"
+#~ msgid "Labels"
+#~ msgstr "Oznake"
+
+#~ msgid ""
+#~ "Check this box if horizontal lines should be decorated with the values "
+#~ "they mark."
+#~ msgstr ""
+#~ "Ovdje možete omogućiti hoće li vodoravne linije biti ukrašene "
+#~ "vrijednostima koje pokazuju."
+
+#~ msgid "Top bar"
+#~ msgstr " Gornja traka"
+
+#~ msgid ""
+#~ "Check this to active the display title bar. This is probably only useful "
+#~ "for applet displays. The bar is only visible if the display is large "
+#~ "enough."
+#~ msgstr ""
+#~ "Ovdje možete uključiti traku s nazivom, što je vjerovatno korisno smo kod "
+#~ "prikazivanja appleta, jer je traka vidljiva samo ako je prikaz dovoljno "
+#~ "velik."
+
+#~ msgid "Colors"
+#~ msgstr "Boje"
+
+#~ msgid "Vertical lines:"
+#~ msgstr "Uspravne linije:"
+
+#~ msgid "Horizontal lines:"
+#~ msgstr "Vodoravne linije:"
+
+#~ msgid "Background:"
+#~ msgstr "Pozadina:"
+
+#~ msgid "Set Color..."
+#~ msgstr "Podesi boju..."
+
+#~ msgid ""
+#~ "Push this button to configure the color of the sensor in the diagram."
+#~ msgstr "Pritisnite ovo dugme za podešavanje boje senzora u dijagramu."
+
+#~ msgid "Move Up"
+#~ msgstr "Pomakni gore"
+
+#~ msgid "Move Down"
+#~ msgstr "Pomakni dole"
+
+#~ msgid "List View Settings"
+#~ msgstr "Postavke prikaza liste"
 
-#: KSGAppletSettings.cc:34
 #, fuzzy
-msgid "System Guard Settings"
-msgstr "Postavke KSysguard appleta"
-
-#: KSGAppletSettings.cc:42
-msgid "Number of displays:"
-msgstr "Broj pokazivača:"
-
-#: KSGAppletSettings.cc:50
-msgid "Size ratio:"
-msgstr "Omjer veličine:"
-
-#: KSGAppletSettings.cc:54
-#, c-format
-msgid "%"
-msgstr "%"
-
-#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
-msgid "Update interval:"
-msgstr "Vrijeme osvježavanja:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
-#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
-#: rc.cpp:132
-#, no-c-format
-msgid " sec"
-msgstr " sek"
-
-#: WorkSheet.cc:109
-msgid ""
-"The file %1 does not contain a valid worksheet definition, which must have a "
-"document type 'KSysGuardWorkSheet'."
-msgstr ""
-"Datoteka %1 ne sadrži ispravan opis radnog lista, jer on mora biti dokument "
-"tipa 'KSysGuardWorkSheet'."
-
-#: WorkSheet.cc:125
-msgid "The file %1 has an invalid worksheet size."
-msgstr "Datoteka %1 ima neispravnu veličinu radnog lista."
-
-#: WorkSheet.cc:273
-msgid "The clipboard does not contain a valid display description."
-msgstr "Clipboard ne sadrži ispravan opis pokazivača."
-
-#: WorkSheet.cc:334
-msgid "&BarGraph"
-msgstr "&BarGraph"
-
-#: WorkSheet.cc:335
-msgid "S&ensorLogger"
-msgstr "Dnevnik s&enzora"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
-#: rc.cpp:15
-#, no-c-format
-msgid "Log File Settings"
-msgstr "Postavke datoteke s dnevnikom"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
-#: rc.cpp:36
-#, no-c-format
-msgid "Select Font..."
-msgstr "Izaberi font..."
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
-#: rc.cpp:39
-#, no-c-format
-msgid "Filter"
-msgstr "Filter"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
-#: rc.cpp:42
-#, no-c-format
-msgid "&Add"
-msgstr "&Dodaj"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
-#: rc.cpp:48
-#, no-c-format
-msgid "&Change"
-msgstr "&Promjeni"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 91
-#: rc.cpp:66 rc.cpp:165
-#, no-c-format
-msgid "Text color:"
-msgstr "Boja teksta:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
-#: ksgrd/StyleSettings.cc:61 rc.cpp:72
-#, no-c-format
-msgid "Alarm color:"
-msgstr "Boja kod alarma:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
-#: rc.cpp:81
-#, no-c-format
-msgid "&Show unit"
-msgstr "P&rikaži jedinice"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
-#: rc.cpp:84
-#, no-c-format
-msgid "Enable this to append the unit to the title of the display."
-msgstr "Ovdje možete omogućiti ispis jedinice na naslovu prikaza."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 83
-#: rc.cpp:93 rc.cpp:150
-#, no-c-format
-msgid "E&nable alarm"
-msgstr "U&ključi alarm"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 149
-#: rc.cpp:105 rc.cpp:138
-#, no-c-format
-msgid "&Enable alarm"
-msgstr "&Uključi alarm"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
-#: rc.cpp:117
-#, no-c-format
-msgid "Normal digit color:"
-msgstr "Obična boja cifara:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
-#: rc.cpp:120
-#, no-c-format
-msgid "Alarm digit color:"
-msgstr "Boja cifara kod alarma:"
-
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
-#: rc.cpp:168
-#, no-c-format
-msgid "Grid color:"
-msgstr "Boja mreže:"
-
-#. i18n: file SystemLoad.sgrd line 5
-#: ksgrd/SensorManager.cc:50 rc.cpp:173
-msgid "CPU Load"
-msgstr "CPU Load"
+#~ msgid "System Guard Settings"
+#~ msgstr "Postavke KSysguard appleta"
 
-#. i18n: file SystemLoad.sgrd line 10
-#: ksgrd/SensorManager.cc:103 rc.cpp:175
-msgid "Load Average (1 min)"
-msgstr "Prosječno opterećenje (1 min)"
+#~ msgid "Number of displays:"
+#~ msgstr "Broj pokazivača:"
 
-#. i18n: file SystemLoad.sgrd line 13
-#: ksgrd/SensorManager.cc:56 rc.cpp:177
-msgid "Physical Memory"
-msgstr "Fizička memorija"
+#~ msgid "Size ratio:"
+#~ msgstr "Omjer veličine:"
 
-#. i18n: file SystemLoad.sgrd line 21
-#: ksgrd/SensorManager.cc:57 rc.cpp:179
-msgid "Swap Memory"
-msgstr "Swap memorija"
+#~ msgid "%"
+#~ msgstr "%"
 
-#. i18n: file KSysGuardApplet.xml line 5
-#: rc.cpp:181
-msgid "CPU"
-msgstr "CPU"
+#~ msgid "Update interval:"
+#~ msgstr "Vrijeme osvježavanja:"
 
-#. i18n: file KSysGuardApplet.xml line 10
-#: rc.cpp:183
-msgid "Mem"
-msgstr "Mem"
+#~ msgid " sec"
+#~ msgstr " sek"
 
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Vedran Ljubović"
+#~ msgid ""
+#~ "The file %1 does not contain a valid worksheet definition, which must "
+#~ "have a document type 'KSysGuardWorkSheet'."
+#~ msgstr ""
+#~ "Datoteka %1 ne sadrži ispravan opis radnog lista, jer on mora biti "
+#~ "dokument tipa 'KSysGuardWorkSheet'."
 
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "vljubovic@smartnet.ba"
+#~ msgid "The file %1 has an invalid worksheet size."
+#~ msgstr "Datoteka %1 ima neispravnu veličinu radnog lista."
 
-#: ksgrd/SensorManager.cc:51
-msgid "Idle Load"
-msgstr "Idle Load"
+#~ msgid "The clipboard does not contain a valid display description."
+#~ msgstr "Clipboard ne sadrži ispravan opis pokazivača."
 
-#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
-#: ksysguard.cc:171
-msgid "System Load"
-msgstr "System Load"
+#~ msgid "&BarGraph"
+#~ msgstr "&BarGraph"
 
-#: ksgrd/SensorManager.cc:53
-msgid "Nice Load"
-msgstr "Nice Load"
+#~ msgid "S&ensorLogger"
+#~ msgstr "Dnevnik s&enzora"
 
-#: ksgrd/SensorManager.cc:54
-msgid "User Load"
-msgstr "User Load"
+#~ msgid "Log File Settings"
+#~ msgstr "Postavke datoteke s dnevnikom"
 
-#: ksgrd/SensorManager.cc:55
-msgid "Memory"
-msgstr "Memorija"
+#~ msgid "Select Font..."
+#~ msgstr "Izaberi font..."
 
-#: ksgrd/SensorManager.cc:58
-msgid "Cached Memory"
-msgstr "Cached memorija"
+#~ msgid "Filter"
+#~ msgstr "Filter"
 
-#: ksgrd/SensorManager.cc:59
-msgid "Buffered Memory"
-msgstr "Buffered memorija"
+#~ msgid "&Add"
+#~ msgstr "&Dodaj"
 
-#: ksgrd/SensorManager.cc:60
-msgid "Used Memory"
-msgstr "Upotrijebljena memorija"
+#~ msgid "&Change"
+#~ msgstr "&Promjeni"
 
-#: ksgrd/SensorManager.cc:61
-msgid "Application Memory"
-msgstr "Memorija za aplikacije"
+#~ msgid "Text color:"
+#~ msgstr "Boja teksta:"
 
-#: ksgrd/SensorManager.cc:62
-msgid "Free Memory"
-msgstr "Slobodna memorija"
+#~ msgid "Alarm color:"
+#~ msgstr "Boja kod alarma:"
 
-#: ksgrd/SensorManager.cc:63
-msgid "Process Count"
-msgstr "Brojač procesa"
+#~ msgid "&Show unit"
+#~ msgstr "P&rikaži jedinice"
 
-#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
-msgid "Process Controller"
-msgstr "Kontroler procesa"
+#~ msgid "Enable this to append the unit to the title of the display."
+#~ msgstr "Ovdje možete omogućiti ispis jedinice na naslovu prikaza."
 
-#: ksgrd/SensorManager.cc:65
-msgid "Disk Throughput"
-msgstr "Propusnost diska"
+#~ msgid "E&nable alarm"
+#~ msgstr "U&ključi alarm"
 
-#: ksgrd/SensorManager.cc:66
-msgid ""
-"_: CPU Load\n"
-"Load"
-msgstr "Opterećenje"
+#~ msgid "&Enable alarm"
+#~ msgstr "&Uključi alarm"
 
-#: ksgrd/SensorManager.cc:67
-msgid "Total Accesses"
-msgstr "Ukupno pristupa"
+#~ msgid "Normal digit color:"
+#~ msgstr "Obična boja cifara:"
 
-#: ksgrd/SensorManager.cc:68
-msgid "Read Accesses"
-msgstr "Pristupa za čitanje"
+#~ msgid "Alarm digit color:"
+#~ msgstr "Boja cifara kod alarma:"
 
-#: ksgrd/SensorManager.cc:69
-msgid "Write Accesses"
-msgstr "Pristupa za pisanje"
+#~ msgid "Grid color:"
+#~ msgstr "Boja mreže:"
 
-#: ksgrd/SensorManager.cc:70
-msgid "Read Data"
-msgstr "Čitanje podataka"
+#~ msgid ""
+#~ "_: NAME OF TRANSLATORS\n"
+#~ "Your names"
+#~ msgstr "Vedran Ljubović"
 
-#: ksgrd/SensorManager.cc:71
-msgid "Write Data"
-msgstr "Pisanje podataka"
+#~ msgid ""
+#~ "_: EMAIL OF TRANSLATORS\n"
+#~ "Your emails"
+#~ msgstr "vljubovic@smartnet.ba"
 
-#: ksgrd/SensorManager.cc:72
-msgid "Pages In"
-msgstr "Ulaznih stranica"
+#~ msgid "Idle Load"
+#~ msgstr "Idle Load"
 
-#: ksgrd/SensorManager.cc:73
-msgid "Pages Out"
-msgstr "Izlaznih stranica"
+#~ msgid "System Load"
+#~ msgstr "System Load"
 
-#: ksgrd/SensorManager.cc:74
-msgid "Context Switches"
-msgstr "Context Switches"
+#~ msgid "Nice Load"
+#~ msgstr "Nice Load"
 
-#: ksgrd/SensorManager.cc:75
-msgid "Network"
-msgstr "Mreža"
+#~ msgid "User Load"
+#~ msgstr "User Load"
 
-#: ksgrd/SensorManager.cc:76
-msgid "Interfaces"
-msgstr "Interfejsi"
+#~ msgid "Memory"
+#~ msgstr "Memorija"
 
-#: ksgrd/SensorManager.cc:77
-msgid "Receiver"
-msgstr "Prijemnik"
+#~ msgid "Cached Memory"
+#~ msgstr "Cached memorija"
 
-#: ksgrd/SensorManager.cc:78
-msgid "Transmitter"
-msgstr "Predajnik"
+#~ msgid "Buffered Memory"
+#~ msgstr "Buffered memorija"
 
-#: ksgrd/SensorManager.cc:79
-msgid "Data"
-msgstr "Podaci"
+#~ msgid "Used Memory"
+#~ msgstr "Upotrijebljena memorija"
 
-#: ksgrd/SensorManager.cc:80
-msgid "Compressed Packets"
-msgstr "Kompresovani paketi"
+#~ msgid "Application Memory"
+#~ msgstr "Memorija za aplikacije"
 
-#: ksgrd/SensorManager.cc:81
-msgid "Dropped Packets"
-msgstr "Ispušteni paketi"
+#~ msgid "Free Memory"
+#~ msgstr "Slobodna memorija"
 
-#: ksgrd/SensorManager.cc:82
-msgid "Errors"
-msgstr "Greške"
+#~ msgid "Process Count"
+#~ msgstr "Brojač procesa"
 
-#: ksgrd/SensorManager.cc:83
-msgid "FIFO Overruns"
-msgstr "FIFO Overruns"
+#~ msgid "Process Controller"
+#~ msgstr "Kontroler procesa"
 
-#: ksgrd/SensorManager.cc:84
-msgid "Frame Errors"
-msgstr "Frame Errors"
+#~ msgid "Disk Throughput"
+#~ msgstr "Propusnost diska"
 
-#: ksgrd/SensorManager.cc:85
-msgid "Multicast"
-msgstr "Multicast"
+#~ msgid ""
+#~ "_: CPU Load\n"
+#~ "Load"
+#~ msgstr "Opterećenje"
 
-#: ksgrd/SensorManager.cc:86
-msgid "Packets"
-msgstr "Paketi"
-
-#: ksgrd/SensorManager.cc:87
-msgid "Carrier"
-msgstr "Carrier"
-
-#: ksgrd/SensorManager.cc:88
-msgid "Collisions"
-msgstr "Sudari"
-
-#: ksgrd/SensorManager.cc:89
-msgid "Sockets"
-msgstr "Sockets"
-
-#: ksgrd/SensorManager.cc:90
-msgid "Total Number"
-msgstr "Ukupan broj"
-
-#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
-msgid "Table"
-msgstr "Tabela"
+#~ msgid "Total Accesses"
+#~ msgstr "Ukupno pristupa"
 
-#: ksgrd/SensorManager.cc:92
-msgid "Advanced Power Management"
-msgstr "Napredno upravljanje energijom"
-
-#: ksgrd/SensorManager.cc:93
-msgid "ACPI"
-msgstr "ACPI"
+#~ msgid "Read Accesses"
+#~ msgstr "Pristupa za čitanje"
 
-#: ksgrd/SensorManager.cc:94
-msgid "Thermal Zone"
-msgstr "Termalna zona"
+#~ msgid "Write Accesses"
+#~ msgstr "Pristupa za pisanje"
 
-#: ksgrd/SensorManager.cc:95
-msgid "Temperature"
-msgstr "Temperatura"
+#~ msgid "Read Data"
+#~ msgstr "Čitanje podataka"
 
-#: ksgrd/SensorManager.cc:96
-msgid "Fan"
-msgstr "Ventilator"
+#~ msgid "Write Data"
+#~ msgstr "Pisanje podataka"
 
-#: ksgrd/SensorManager.cc:97
-msgid "State"
-msgstr "Status"
+#~ msgid "Pages In"
+#~ msgstr "Ulaznih stranica"
 
-#: ksgrd/SensorManager.cc:98
-msgid "Battery"
-msgstr "Baterija"
+#~ msgid "Pages Out"
+#~ msgstr "Izlaznih stranica"
 
-#: ksgrd/SensorManager.cc:99
-msgid "Battery Charge"
-msgstr "Punjenje baterije"
+#~ msgid "Context Switches"
+#~ msgstr "Context Switches"
 
-#: ksgrd/SensorManager.cc:100
-msgid "Battery Usage"
-msgstr "Upotreba baterije"
+#~ msgid "Network"
+#~ msgstr "Mreža"
 
-#: ksgrd/SensorManager.cc:101
-msgid "Remaining Time"
-msgstr "Preostalo vrijeme"
+#~ msgid "Interfaces"
+#~ msgstr "Interfejsi"
 
-#: ksgrd/SensorManager.cc:102
-msgid "Interrupts"
-msgstr "Prekidi"
+#~ msgid "Receiver"
+#~ msgstr "Prijemnik"
 
-#: ksgrd/SensorManager.cc:104
-msgid "Load Average (5 min)"
-msgstr "Prosječno opterećenje (5 min)"
+#~ msgid "Transmitter"
+#~ msgstr "Predajnik"
 
-#: ksgrd/SensorManager.cc:105
-msgid "Load Average (15 min)"
-msgstr "Prosječno opterećenje (15 min)"
+#~ msgid "Data"
+#~ msgstr "Podaci"
 
-#: ksgrd/SensorManager.cc:106
-msgid "Clock Frequency"
-msgstr "Frekvencija sata"
+#~ msgid "Compressed Packets"
+#~ msgstr "Kompresovani paketi"
 
-#: ksgrd/SensorManager.cc:107
-msgid "Hardware Sensors"
-msgstr "Hardverski senzori"
+#~ msgid "Dropped Packets"
+#~ msgstr "Ispušteni paketi"
 
-#: ksgrd/SensorManager.cc:108
-msgid "Partition Usage"
-msgstr "Iskorištenost particija"
+#~ msgid "Errors"
+#~ msgstr "Greške"
 
-#: ksgrd/SensorManager.cc:109
-msgid "Used Space"
-msgstr "Iskorišteni prostor"
+#~ msgid "FIFO Overruns"
+#~ msgstr "FIFO Overruns"
 
-#: ksgrd/SensorManager.cc:110
-msgid "Free Space"
-msgstr "Slobodan prostor"
+#~ msgid "Frame Errors"
+#~ msgstr "Frame Errors"
 
-#: ksgrd/SensorManager.cc:111
-msgid "Fill Level"
-msgstr "Nivo popunjenosti"
+#~ msgid "Multicast"
+#~ msgstr "Multicast"
 
-#: ksgrd/SensorManager.cc:115
-#, c-format
-msgid "CPU%1"
-msgstr "CPU%1"
-
-#: ksgrd/SensorManager.cc:117
-#, c-format
-msgid "Disk%1"
-msgstr "Disk%1"
-
-#: ksgrd/SensorManager.cc:122
-#, c-format
-msgid "Fan%1"
-msgstr "Ventilator%1"
-
-#: ksgrd/SensorManager.cc:124
-#, c-format
-msgid "Temperature%1"
-msgstr "Temperatura%1"
+#~ msgid "Packets"
+#~ msgstr "Paketi"
 
-#: ksgrd/SensorManager.cc:127
-msgid "Total"
-msgstr "Ukupno"
+#~ msgid "Carrier"
+#~ msgstr "Carrier"
 
-#: ksgrd/SensorManager.cc:133
-#, c-format
-msgid "Int%1"
-msgstr "Int%1"
-
-#: ksgrd/SensorManager.cc:140
-msgid ""
-"_: the unit 1 per second\n"
-"1/s"
-msgstr "1/s"
+#~ msgid "Collisions"
+#~ msgstr "Sudari"
 
-#: ksgrd/SensorManager.cc:141
-msgid "kBytes"
-msgstr "kBajta"
+#~ msgid "Sockets"
+#~ msgstr "Sockets"
 
-#: ksgrd/SensorManager.cc:142
-msgid ""
-"_: the unit minutes\n"
-"min"
-msgstr "min"
+#~ msgid "Total Number"
+#~ msgstr "Ukupan broj"
 
-#: ksgrd/SensorManager.cc:143
-msgid ""
-"_: the frequency unit\n"
-"MHz"
-msgstr "MHz"
-
-#: ksgrd/SensorManager.cc:146
-msgid "Integer Value"
-msgstr "Cjelobrojna vrijednost"
-
-#: ksgrd/SensorManager.cc:147
-msgid "Floating Point Value"
-msgstr "Vrijednost sa tekućim zarezom"
-
-#: ksgrd/SensorManager.cc:289
-msgid "Connection to %1 has been lost."
-msgstr "Konekcija na %1 je izgubljena."
-
-#: ksgrd/StyleSettings.cc:41
-msgid "Global Style Settings"
-msgstr "Postavke globalnog stila"
-
-#: ksgrd/StyleSettings.cc:44
-msgid "Display Style"
-msgstr "Stil pokazivača"
-
-#: ksgrd/StyleSettings.cc:47
-msgid "First foreground color:"
-msgstr "Prva boja teksta:"
-
-#: ksgrd/StyleSettings.cc:54
-msgid "Second foreground color:"
-msgstr "Druga boja teksta:"
-
-#: ksgrd/StyleSettings.cc:85
-msgid "Sensor Colors"
-msgstr "Boja senzora"
-
-#: ksgrd/StyleSettings.cc:91
-msgid "Change Color..."
-msgstr "Izmjeni boju..."
-
-#: ksgrd/StyleSettings.cc:166
-#, c-format
-msgid "Color %1"
-msgstr "Boja %1"
-
-#: ksgrd/SensorSocketAgent.cc:104
-msgid "Connection to %1 refused"
-msgstr "%1 odbija konekciju"
-
-#: ksgrd/SensorSocketAgent.cc:108
-msgid "Host %1 not found"
-msgstr "Računar %1 nije pronađen"
-
-#: ksgrd/SensorSocketAgent.cc:112
-#, c-format
-msgid "Timeout at host %1"
-msgstr "Greška u čitanju sa računara %1"
-
-#: ksgrd/SensorSocketAgent.cc:116
-#, c-format
-msgid "Network failure host %1"
-msgstr "Mrežna greška računar %1"
-
-#: ksgrd/TimerSettings.cc:36
-msgid "Timer Settings"
-msgstr "Postavke timera"
-
-#: ksgrd/TimerSettings.cc:43
-msgid "Use update interval of worksheet"
-msgstr "Koristi interval osvježavanja radnog lista"
-
-#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
-msgid "All displays of the sheet are updated at the rate specified here."
-msgstr "Svi pokazivači na listu se obnavljaju u navedenom vremenu."
-
-#: ksgrd/HostConnector.cc:37
-msgid "Connect Host"
-msgstr "Spoji računar"
-
-#: ksgrd/HostConnector.cc:44
-msgid "Host:"
-msgstr "Računar:"
-
-#: ksgrd/HostConnector.cc:54
-msgid "Enter the name of the host you want to connect to."
-msgstr "Unesite ime računara na koji se želite spojiti."
-
-#: ksgrd/HostConnector.cc:61
-msgid "Connection Type"
-msgstr "Vrsta konekcije"
-
-#: ksgrd/HostConnector.cc:66
-msgid "ssh"
-msgstr "ssh"
-
-#: ksgrd/HostConnector.cc:69
-msgid "Select this to use the secure shell to login to the remote host."
-msgstr ""
-"Izaberite ovu opciju ako želite koristiti secure shell za prijavu na udaljeni "
-"računar."
+#~ msgid "Table"
+#~ msgstr "Tabela"
 
-#: ksgrd/HostConnector.cc:72
-msgid "rsh"
-msgstr "rsh"
+#~ msgid "Advanced Power Management"
+#~ msgstr "Napredno upravljanje energijom"
 
-#: ksgrd/HostConnector.cc:73
-msgid "Select this to use the remote shell to login to the remote host."
-msgstr ""
-"Izaberite ovu opciju ako želite koristiti remote shell za prijavu na udaljeni "
-"računar."
+#~ msgid "ACPI"
+#~ msgstr "ACPI"
 
-#: ksgrd/HostConnector.cc:76
-msgid "Daemon"
-msgstr "Daemon"
+#~ msgid "Thermal Zone"
+#~ msgstr "Termalna zona"
 
-#: ksgrd/HostConnector.cc:77
-msgid ""
-"Select this if you want to connect to a ksysguard daemon that is running on the "
-"machine you want to connect to, and is listening for client requests."
-msgstr ""
-"Izaberite ovo ako želite da se spojite na ksysguard demon koji je pokrenut na "
-"računaru na koji se želite spojiti, i koji sluša za zahtjeve klijenata."
+#~ msgid "Temperature"
+#~ msgstr "Temperatura"
 
-#: ksgrd/HostConnector.cc:80
-msgid "Custom command"
-msgstr "Vlastita naredba"
+#~ msgid "Fan"
+#~ msgstr "Ventilator"
 
-#: ksgrd/HostConnector.cc:81
-msgid ""
-"Select this to use the command you entered below to start ksysguardd on the "
-"remote host."
-msgstr ""
-"Izaberite ovo da biste koristili naredbu unesenu ispod za pokretanje ksysguardd "
-"na udaljenom računaru."
+#~ msgid "State"
+#~ msgstr "Status"
 
-#: ksgrd/HostConnector.cc:84
-msgid "Port:"
-msgstr "Port:"
+#~ msgid "Battery"
+#~ msgstr "Baterija"
 
-#: ksgrd/HostConnector.cc:90
-msgid ""
-"Enter the port number on which the ksysguard daemon is listening for "
-"connections."
-msgstr "Unesite broj porta na kojem ksysguard demon očekuje konekcije."
+#~ msgid "Battery Charge"
+#~ msgstr "Punjenje baterije"
 
-#: ksgrd/HostConnector.cc:93
-msgid "e.g.  3112"
-msgstr "npr.  3112"
+#~ msgid "Battery Usage"
+#~ msgstr "Upotreba baterije"
 
-#: ksgrd/HostConnector.cc:96
-msgid "Command:"
-msgstr "Naredba:"
+#~ msgid "Remaining Time"
+#~ msgstr "Preostalo vrijeme"
 
-#: ksgrd/HostConnector.cc:105
-msgid "Enter the command that runs ksysguardd on the host you want to monitor."
-msgstr ""
-"Unesite naredbu za pokretanje ksysguardd na računaru koji želite pratiti."
+#~ msgid "Interrupts"
+#~ msgstr "Prekidi"
 
-#: ksgrd/HostConnector.cc:109
-msgid "e.g. ssh -l root remote.host.org ksysguardd"
-msgstr "npr.. ssh -l root remote.host.org ksysguardd"
+#~ msgid "Load Average (5 min)"
+#~ msgstr "Prosječno opterećenje (5 min)"
 
-#: ksgrd/SensorAgent.cc:88
-msgid ""
-"Message from %1:\n"
-"%2"
-msgstr ""
-"Poruka od %1:\n"
-"%2"
+#~ msgid "Load Average (15 min)"
+#~ msgstr "Prosječno opterećenje (15 min)"
 
-#: SensorBrowser.cc:77
-msgid "Sensor Browser"
-msgstr "Preglednik senzora"
+#~ msgid "Clock Frequency"
+#~ msgstr "Frekvencija sata"
 
-#: SensorBrowser.cc:78
-msgid "Sensor Type"
-msgstr "Vrsta senzora"
+#~ msgid "Hardware Sensors"
+#~ msgstr "Hardverski senzori"
 
-#: SensorBrowser.cc:81
-msgid "Drag sensors to empty cells of a worksheet or the panel applet."
-msgstr "Dovucite senzore u prazna polja radnog lista ili appleta na panelu."
+#~ msgid "Partition Usage"
+#~ msgstr "Iskorištenost particija"
 
-#: SensorBrowser.cc:88
-msgid ""
-"The sensor browser lists the connected hosts and the sensors that they provide. "
-"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
-"display will appear that visualizes the values provided by the sensor. Some "
-"sensor displays can display values of multiple sensors. Simply drag other "
-"sensors on to the display to add more sensors."
-msgstr ""
-"Pretraživač senzora daje listu računara na koje ste konektovani i senzora koje "
-"oni pružaju. Kliknite i odvucite senzore u za to predviđene oblasti radnog "
-"lista ili appleta na panelu. Tada će se pojaviti pokazivač koji prikazuje "
-"vrijednosti očitane sa senzora. Neki pokazivači mogu pokazivati vrijednosti "
-"više senzora, jednostavno povucite druge senzore na prikaz i oni će biti dodani "
-"istom."
+#~ msgid "Used Space"
+#~ msgstr "Iskorišteni prostor"
 
-#: SensorBrowser.cc:148
-msgid "Drag sensors to empty fields in a worksheet."
-msgstr "Povucite senzore na prazna polja na radnom listu."
+#~ msgid "Free Space"
+#~ msgstr "Slobodan prostor"
 
-#: WorkSheetSettings.cc:41
-msgid "Worksheet Properties"
-msgstr "Postavke radnog lista"
-
-#: WorkSheetSettings.cc:67
-msgid "Rows:"
-msgstr "Redovi:"
-
-#: WorkSheetSettings.cc:76
-msgid "Columns:"
-msgstr "Kolone:"
-
-#: WorkSheetSettings.cc:97
-msgid "Enter the number of rows the sheet should have."
-msgstr "Unesite broj redova lista."
-
-#: WorkSheetSettings.cc:98
-msgid "Enter the number of columns the sheet should have."
-msgstr "Unesite broj kolona lista."
-
-#: WorkSheetSettings.cc:100
-msgid "Enter the title of the worksheet here."
-msgstr "Ovdje unosite naslov lista."
-
-#: ksysguard.cc:64
-msgid "TDE system guard"
-msgstr "TDE system guard"
-
-#: ksysguard.cc:74 ksysguard.cc:556
-msgid "TDE System Guard"
-msgstr "TDE System Guard"
-
-#: ksysguard.cc:100
-msgid "88888 Processes"
-msgstr "88888 Procesa"
-
-#: ksysguard.cc:101
-msgid "Memory: 88888888888 kB used, 88888888888 kB free"
-msgstr "Memorija: 88888888888 kB zauzeto, 88888888888 kB slobodno"
-
-#: ksysguard.cc:103
-msgid "Swap: 888888888 kB used, 888888888 kB free"
-msgstr "Swap: 888888888 kB zauzeto, 888888888 kB slobodno"
-
-#: ksysguard.cc:108
-msgid "&New Worksheet..."
-msgstr "&Novi radni list..."
-
-#: ksysguard.cc:111
-msgid "Import Worksheet..."
-msgstr "Uvezi radni list..."
-
-#: ksysguard.cc:114
-msgid "&Import Recent Worksheet"
-msgstr "&Uvezi skorašnje listove"
-
-#: ksysguard.cc:117
-msgid "&Remove Worksheet"
-msgstr "&Ukloni radni list"
-
-#: ksysguard.cc:120
-msgid "&Export Worksheet..."
-msgstr "&Izvezi radni list..."
-
-#: ksysguard.cc:125
-msgid "C&onnect Host..."
-msgstr "&Spoji računar..."
-
-#: ksysguard.cc:127
-msgid "D&isconnect Host"
-msgstr "O&dspoji računar"
-
-#: ksysguard.cc:133
-msgid "&Worksheet Properties"
-msgstr "&Postavke radnog lista"
-
-#: ksysguard.cc:136
-msgid "Load Standard Sheets"
-msgstr "Učitaj standardne listove"
-
-#: ksysguard.cc:140
-msgid "Configure &Style..."
-msgstr "Podešavanje &stila..."
-
-#: ksysguard.cc:157
-msgid "Do you really want to restore the default worksheets?"
-msgstr "Zaista želite vratiti podrazumjevane radne listove?"
-
-#: ksysguard.cc:158
-msgid "Reset All Worksheets"
-msgstr "Resetuj sve radne listove"
+#~ msgid "Fill Level"
+#~ msgstr "Nivo popunjenosti"
 
-#: ksysguard.cc:159
-msgid "Reset"
-msgstr "Poništi"
+#~ msgid "CPU%1"
+#~ msgstr "CPU%1"
 
-#: Workspace.cc:105 ksysguard.cc:176
-msgid "Process Table"
-msgstr "Tabela procesa"
+#~ msgid "Disk%1"
+#~ msgstr "Disk%1"
 
-#: ksysguard.cc:436
-#, c-format
-msgid ""
-"_n: 1 Process\n"
-"%n Processes"
-msgstr ""
-"%b proces\n"
-"%n procesa\n"
-"%n procesa"
+#~ msgid "Fan%1"
+#~ msgstr "Ventilator%1"
 
-#: ksysguard.cc:446
-msgid "Memory: %1 %2 used, %3 %4 free"
-msgstr "Memorija: %1 %2 zauzeto, %3 %4 slobodno"
+#~ msgid "Temperature%1"
+#~ msgstr "Temperatura%1"
 
-#: ksysguard.cc:504
-msgid "No swap space available"
-msgstr "Nema slobodnog swap prostora"
+#~ msgid "Total"
+#~ msgstr "Ukupno"
 
-#: ksysguard.cc:506
-msgid "Swap: %1 %2 used, %3 %4 free"
-msgstr "Swap: %1 %2 zauzeto, %3 %4 slobodno"
+#~ msgid "Int%1"
+#~ msgstr "Int%1"
 
-#: ksysguard.cc:515
-msgid "Show only process list of local host"
-msgstr "Prikaži samo procese na lokalnom računaru"
+#~ msgid ""
+#~ "_: the unit 1 per second\n"
+#~ "1/s"
+#~ msgstr "1/s"
 
-#: ksysguard.cc:516
-msgid "Optional worksheet files to load"
-msgstr "Ostale datoteke s radnim listovima za učitavanje"
+#~ msgid "kBytes"
+#~ msgstr "kBajta"
 
-#: ksysguard.cc:558
-msgid "(c) 1996-2002 The KSysGuard Developers"
-msgstr "(c) 1996-2002 KSysGuard programeri"
+#~ msgid ""
+#~ "_: the unit minutes\n"
+#~ "min"
+#~ msgstr "min"
 
-#: ksysguard.cc:566
-msgid ""
-"Solaris Support\n"
-"Parts derived (by permission) from the sunos5\n"
-"module of William LeFebvre's \"top\" utility."
-msgstr ""
-"Solaris podrška\n"
-"Dijelovi izvedeni (uz dozvolu) iz sunos5\n"
-"modula \"top\" alata čiji je autor William LeFebvre."
+#~ msgid ""
+#~ "_: the frequency unit\n"
+#~ "MHz"
+#~ msgstr "MHz"
 
-#: Workspace.cc:53
-msgid ""
-"This is your work space. It holds your worksheets. You need to create a new "
-"worksheet (Menu File->New) before you can drag sensors here."
-msgstr ""
-"Ovo je vaš radni prostor. On sadrži vaše radne listove. Možete napraviti novi "
-"radni list (u meniju Datoteka -> Novi) prije nego što ovdje dovučete senzore."
+#~ msgid "Integer Value"
+#~ msgstr "Cjelobrojna vrijednost"
 
-#: Workspace.cc:135
-#, c-format
-msgid "Sheet %1"
-msgstr "List %1"
+#~ msgid "Floating Point Value"
+#~ msgstr "Vrijednost sa tekućim zarezom"
 
-#: Workspace.cc:165 Workspace.cc:305
-msgid ""
-"The worksheet '%1' contains unsaved data.\n"
-"Do you want to save the worksheet?"
-msgstr ""
-"List '%1' sadrži podatke koji nisu snimljeni.\n"
-"Da li želite snimiti list?"
+#~ msgid "Connection to %1 has been lost."
+#~ msgstr "Konekcija na %1 je izgubljena."
+
+#~ msgid "Global Style Settings"
+#~ msgstr "Postavke globalnog stila"
+
+#~ msgid "Display Style"
+#~ msgstr "Stil pokazivača"
+
+#~ msgid "First foreground color:"
+#~ msgstr "Prva boja teksta:"
+
+#~ msgid "Second foreground color:"
+#~ msgstr "Druga boja teksta:"
+
+#~ msgid "Sensor Colors"
+#~ msgstr "Boja senzora"
+
+#~ msgid "Change Color..."
+#~ msgstr "Izmjeni boju..."
+
+#~ msgid "Color %1"
+#~ msgstr "Boja %1"
+
+#~ msgid "Connection to %1 refused"
+#~ msgstr "%1 odbija konekciju"
+
+#~ msgid "Host %1 not found"
+#~ msgstr "Računar %1 nije pronađen"
+
+#~ msgid "Timeout at host %1"
+#~ msgstr "Greška u čitanju sa računara %1"
+
+#~ msgid "Network failure host %1"
+#~ msgstr "Mrežna greška računar %1"
+
+#~ msgid "Timer Settings"
+#~ msgstr "Postavke timera"
+
+#~ msgid "Use update interval of worksheet"
+#~ msgstr "Koristi interval osvježavanja radnog lista"
+
+#~ msgid "All displays of the sheet are updated at the rate specified here."
+#~ msgstr "Svi pokazivači na listu se obnavljaju u navedenom vremenu."
+
+#~ msgid "Connect Host"
+#~ msgstr "Spoji računar"
+
+#~ msgid "Host:"
+#~ msgstr "Računar:"
+
+#~ msgid "Enter the name of the host you want to connect to."
+#~ msgstr "Unesite ime računara na koji se želite spojiti."
+
+#~ msgid "Connection Type"
+#~ msgstr "Vrsta konekcije"
+
+#~ msgid "ssh"
+#~ msgstr "ssh"
+
+#~ msgid "Select this to use the secure shell to login to the remote host."
+#~ msgstr ""
+#~ "Izaberite ovu opciju ako želite koristiti secure shell za prijavu na "
+#~ "udaljeni računar."
+
+#~ msgid "rsh"
+#~ msgstr "rsh"
+
+#~ msgid "Select this to use the remote shell to login to the remote host."
+#~ msgstr ""
+#~ "Izaberite ovu opciju ako želite koristiti remote shell za prijavu na "
+#~ "udaljeni računar."
+
+#~ msgid "Daemon"
+#~ msgstr "Daemon"
+
+#~ msgid ""
+#~ "Select this if you want to connect to a ksysguard daemon that is running "
+#~ "on the machine you want to connect to, and is listening for client "
+#~ "requests."
+#~ msgstr ""
+#~ "Izaberite ovo ako želite da se spojite na ksysguard demon koji je "
+#~ "pokrenut na računaru na koji se želite spojiti, i koji sluša za zahtjeve "
+#~ "klijenata."
+
+#~ msgid "Custom command"
+#~ msgstr "Vlastita naredba"
+
+#~ msgid ""
+#~ "Select this to use the command you entered below to start ksysguardd on "
+#~ "the remote host."
+#~ msgstr ""
+#~ "Izaberite ovo da biste koristili naredbu unesenu ispod za pokretanje "
+#~ "ksysguardd na udaljenom računaru."
+
+#~ msgid "Port:"
+#~ msgstr "Port:"
+
+#~ msgid ""
+#~ "Enter the port number on which the ksysguard daemon is listening for "
+#~ "connections."
+#~ msgstr "Unesite broj porta na kojem ksysguard demon očekuje konekcije."
+
+#~ msgid "e.g.  3112"
+#~ msgstr "npr.  3112"
+
+#~ msgid "Command:"
+#~ msgstr "Naredba:"
+
+#~ msgid ""
+#~ "Enter the command that runs ksysguardd on the host you want to monitor."
+#~ msgstr ""
+#~ "Unesite naredbu za pokretanje ksysguardd na računaru koji želite pratiti."
+
+#~ msgid "e.g. ssh -l root remote.host.org ksysguardd"
+#~ msgstr "npr.. ssh -l root remote.host.org ksysguardd"
+
+#~ msgid ""
+#~ "Message from %1:\n"
+#~ "%2"
+#~ msgstr ""
+#~ "Poruka od %1:\n"
+#~ "%2"
+
+#~ msgid "Sensor Browser"
+#~ msgstr "Preglednik senzora"
+
+#~ msgid "Sensor Type"
+#~ msgstr "Vrsta senzora"
+
+#~ msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+#~ msgstr "Dovucite senzore u prazna polja radnog lista ili appleta na panelu."
+
+#~ msgid ""
+#~ "The sensor browser lists the connected hosts and the sensors that they "
+#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
+#~ "panel applet. A display will appear that visualizes the values provided "
+#~ "by the sensor. Some sensor displays can display values of multiple "
+#~ "sensors. Simply drag other sensors on to the display to add more sensors."
+#~ msgstr ""
+#~ "Pretraživač senzora daje listu računara na koje ste konektovani i senzora "
+#~ "koje oni pružaju. Kliknite i odvucite senzore u za to predviđene oblasti "
+#~ "radnog lista ili appleta na panelu. Tada će se pojaviti pokazivač koji "
+#~ "prikazuje vrijednosti očitane sa senzora. Neki pokazivači mogu pokazivati "
+#~ "vrijednosti više senzora, jednostavno povucite druge senzore na prikaz i "
+#~ "oni će biti dodani istom."
+
+#~ msgid "Drag sensors to empty fields in a worksheet."
+#~ msgstr "Povucite senzore na prazna polja na radnom listu."
+
+#~ msgid "Worksheet Properties"
+#~ msgstr "Postavke radnog lista"
+
+#~ msgid "Rows:"
+#~ msgstr "Redovi:"
+
+#~ msgid "Columns:"
+#~ msgstr "Kolone:"
+
+#~ msgid "Enter the number of rows the sheet should have."
+#~ msgstr "Unesite broj redova lista."
+
+#~ msgid "Enter the number of columns the sheet should have."
+#~ msgstr "Unesite broj kolona lista."
+
+#~ msgid "Enter the title of the worksheet here."
+#~ msgstr "Ovdje unosite naslov lista."
+
+#~ msgid "TDE system guard"
+#~ msgstr "TDE system guard"
+
+#~ msgid "TDE System Guard"
+#~ msgstr "TDE System Guard"
+
+#~ msgid "88888 Processes"
+#~ msgstr "88888 Procesa"
+
+#~ msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+#~ msgstr "Memorija: 88888888888 kB zauzeto, 88888888888 kB slobodno"
+
+#~ msgid "Swap: 888888888 kB used, 888888888 kB free"
+#~ msgstr "Swap: 888888888 kB zauzeto, 888888888 kB slobodno"
+
+#~ msgid "&New Worksheet..."
+#~ msgstr "&Novi radni list..."
+
+#~ msgid "Import Worksheet..."
+#~ msgstr "Uvezi radni list..."
+
+#~ msgid "&Import Recent Worksheet"
+#~ msgstr "&Uvezi skorašnje listove"
+
+#~ msgid "&Remove Worksheet"
+#~ msgstr "&Ukloni radni list"
+
+#~ msgid "&Export Worksheet..."
+#~ msgstr "&Izvezi radni list..."
+
+#~ msgid "C&onnect Host..."
+#~ msgstr "&Spoji računar..."
+
+#~ msgid "D&isconnect Host"
+#~ msgstr "O&dspoji računar"
+
+#~ msgid "&Worksheet Properties"
+#~ msgstr "&Postavke radnog lista"
+
+#~ msgid "Load Standard Sheets"
+#~ msgstr "Učitaj standardne listove"
+
+#~ msgid "Configure &Style..."
+#~ msgstr "Podešavanje &stila..."
+
+#~ msgid "Do you really want to restore the default worksheets?"
+#~ msgstr "Zaista želite vratiti podrazumjevane radne listove?"
+
+#~ msgid "Reset All Worksheets"
+#~ msgstr "Resetuj sve radne listove"
+
+#~ msgid "Reset"
+#~ msgstr "Poništi"
+
+#~ msgid "Process Table"
+#~ msgstr "Tabela procesa"
+
+#~ msgid ""
+#~ "_n: 1 Process\n"
+#~ "%n Processes"
+#~ msgstr ""
+#~ "%b proces\n"
+#~ "%n procesa\n"
+#~ "%n procesa"
+
+#~ msgid "Memory: %1 %2 used, %3 %4 free"
+#~ msgstr "Memorija: %1 %2 zauzeto, %3 %4 slobodno"
+
+#~ msgid "No swap space available"
+#~ msgstr "Nema slobodnog swap prostora"
+
+#~ msgid "Swap: %1 %2 used, %3 %4 free"
+#~ msgstr "Swap: %1 %2 zauzeto, %3 %4 slobodno"
+
+#~ msgid "Show only process list of local host"
+#~ msgstr "Prikaži samo procese na lokalnom računaru"
+
+#~ msgid "Optional worksheet files to load"
+#~ msgstr "Ostale datoteke s radnim listovima za učitavanje"
+
+#~ msgid "(c) 1996-2002 The KSysGuard Developers"
+#~ msgstr "(c) 1996-2002 KSysGuard programeri"
+
+#~ msgid ""
+#~ "Solaris Support\n"
+#~ "Parts derived (by permission) from the sunos5\n"
+#~ "module of William LeFebvre's \"top\" utility."
+#~ msgstr ""
+#~ "Solaris podrška\n"
+#~ "Dijelovi izvedeni (uz dozvolu) iz sunos5\n"
+#~ "modula \"top\" alata čiji je autor William LeFebvre."
+
+#~ msgid ""
+#~ "This is your work space. It holds your worksheets. You need to create a "
+#~ "new worksheet (Menu File->New) before you can drag sensors here."
+#~ msgstr ""
+#~ "Ovo je vaš radni prostor. On sadrži vaše radne listove. Možete napraviti "
+#~ "novi radni list (u meniju Datoteka -> Novi) prije nego što ovdje dovučete "
+#~ "senzore."
+
+#~ msgid "Sheet %1"
+#~ msgstr "List %1"
+
+#~ msgid ""
+#~ "The worksheet '%1' contains unsaved data.\n"
+#~ "Do you want to save the worksheet?"
+#~ msgstr ""
+#~ "List '%1' sadrži podatke koji nisu snimljeni.\n"
+#~ "Da li želite snimiti list?"
 
-#: Workspace.cc:181 Workspace.cc:235
-msgid "*.sgrd|Sensor Files"
-msgstr "*.sgrd|Senzor datoteke"
+#~ msgid "*.sgrd|Sensor Files"
+#~ msgstr "*.sgrd|Senzor datoteke"
 
-#: Workspace.cc:184
-msgid "Select Worksheet to Load"
-msgstr "Odaberite radni list za učitavanje"
+#~ msgid "Select Worksheet to Load"
+#~ msgstr "Odaberite radni list za učitavanje"
 
-#: Workspace.cc:229 Workspace.cc:269
-msgid "You do not have a worksheet that could be saved."
-msgstr "Ne postoji niti jedan radni list koji možete snimiti."
+#~ msgid "You do not have a worksheet that could be saved."
+#~ msgstr "Ne postoji niti jedan radni list koji možete snimiti."
 
-#: Workspace.cc:239
-msgid "Save Current Worksheet As"
-msgstr "Snimi sadašnji radni list kao"
+#~ msgid "Save Current Worksheet As"
+#~ msgstr "Snimi sadašnji radni list kao"
 
-#: Workspace.cc:320
-msgid "There are no worksheets that could be deleted."
-msgstr "Ne postoji niti jedan radni list koji možete obrisati."
+#~ msgid "There are no worksheets that could be deleted."
+#~ msgstr "Ne postoji niti jedan radni list koji možete obrisati."
 
-#: Workspace.cc:448
-msgid "Cannot find file ProcessTable.sgrd."
-msgstr "Ne mogu pronaći datoteku ProcessTable.sgrd."
+#~ msgid "Cannot find file ProcessTable.sgrd."
+#~ msgstr "Ne mogu pronaći datoteku ProcessTable.sgrd."
 
 #~ msgid "#"
 #~ msgstr "#"