Automated l10n update (.po files)

1 files changed, 457 insertions, 1207 deletions

diff --git a/tde-i18n-cs/messages/tdelibs/cupsdconf.po b/tde-i18n-cs/messages/tdelibs/cupsdconf.po
index 1a6f31c329b..3f66b15e0b4 100644
--- a/tde-i18n-cs/messages/tdelibs/cupsdconf.po
+++ b/tde-i18n-cs/messages/tdelibs/cupsdconf.po
@@ -10,10 +10,11 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: cupsdconf\n"
-"POT-Creation-Date: 2005-05-18 21:23+0200\n"
+"POT-Creation-Date: 2014-09-29 00:46-0500\n"
 "PO-Revision-Date: 2005-10-17 10:32+0200\n"
 "Last-Translator: Klara Cihlarova <koty@seznam.cz>\n"
 "Language-Team: cs_CZ <cs@li.org>\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -65,1188 +66,6 @@ msgstr "Komu:"
 msgid "Browse Address"
 msgstr "Adresa prohlížení"
 
-#: cupsd.conf.template.cpp:1
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Server name (ServerName)</b>\n"
-"<p>\n"
-"The hostname of your server, as advertised to the world.\n"
-"By default CUPS will use the hostname of the system.</p>\n"
-"<p>\n"
-"To set the default server used by clients, see the client.conf file.</p>\n"
-"<p>\n"
-"<i>ex</i>: myhost.domain.com</p>\n"
-msgstr ""
-"<b>Jméno serveru (ServerName)</b>\n"
-"<p>\n"
-"Jméno vašeho serveru, jak se hlásí okolnímu světu.\n"
-"Ve výchozím nastavení CUPS použije jméno vašeho systému.</p>\n"
-"<p>\n"
-"Pro nastavení výchozího serveru používaného klienty se podívejte do souboru "
-"client.conf.</p>\n"
-"<p>\n"
-"<i>např</i>.: myhost.domain.cz</p>\n"
-
-#: cupsd.conf.template.cpp:11
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Server administrator (ServerAdmin)</b>\n"
-"<p>\n"
-"The email address to send all complaints or problems to.\n"
-"By default CUPS will use \"root@hostname\".</p>\n"
-"<p>\n"
-"<i>ex</i>: root@myhost.com</p>\n"
-msgstr ""
-"<b>Správce serveru (ServerAdmi</b>\n"
-"<p>\n"
-"Emailová adresa sloužící k zasílání všech problémů a připomínek.\n"
-"Ve výchozím nastavení CUPS použije \"root@hostname\"</p>\n"
-"<p>\n"
-"<i>např</i>.: root@myhost.cz</p>\n"
-
-#: cupsd.conf.template.cpp:19
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Access log (AccessLog)</b>\n"
-"<p>\n"
-"The access log file; if this does not start with a leading /\n"
-"then it is assumed to be relative to ServerRoot.  By default set to\n"
-"\"/var/log/cups/access_log\".</p>\n"
-"<p>\n"
-"You can also use the special name <b>syslog</b> to send the output to the\n"
-"syslog file or daemon.</p>\n"
-"<p>\n"
-"<i>ex</i>: /var/log/cups/access_log</p>\n"
-msgstr ""
-"<b>Záznam o přístupu (AccessLog)</b>\n"
-"<p>\n"
-"Soubor pro záznamy o přístupu; pokud není na začátku /,\n"
-"pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
-"Výchozí nastavení je \"/var/log/cups/access_log\".</p>\n"
-"<p>\n"
-"Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
-"předáván souboru nebo démonu syslog.</p>\n"
-"<p>\n"
-"<i>např</i>.: /var/log/cups/access_log</p>\n"
-
-#: cupsd.conf.template.cpp:31
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Data directory (DataDir)</b>\n"
-"<p>\n"
-"The root directory for the CUPS data files.\n"
-"By default /usr/share/cups.</p>\n"
-"<p>\n"
-"<i>ex</i>: /usr/share/cups</p>\n"
-msgstr ""
-"<b>Adresář s daty (DataDir)</b>\n"
-"<p>\n"
-"Kořenový adresář pro soubory dat CUPS serveru.\n"
-"Výchozí nastavení /usr/share/cups.</p>\n"
-"<p>\n"
-"<i>např</i>.: /usr/share/cups</p>\n"
-
-#: cupsd.conf.template.cpp:39
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Default character set (DefaultCharset)</b>\n"
-"<p>\n"
-"The default character set to use. If not specified,\n"
-"defaults to utf-8.  Note that this can also be overridden in\n"
-"HTML documents...</p>\n"
-"<p>\n"
-"<i>ex</i>: utf-8</p>\n"
-msgstr ""
-"<b>Výchozí znaková sada (DefaultCharset)</b>\n"
-"<p>\n"
-"Výchozí znaková sada, která se má použít. Pokud není\n"
-"specifikována, je použito utf-8. Nezapomeňte, že toto může být\n"
-"přenastaveno v HTML dokumentech...</p>\n"
-"<p>\n"
-"<i>např</i>.: utf-8</p>\n"
-
-#: cupsd.conf.template.cpp:48
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Default language (DefaultLanguage)</b>\n"
-"<p>\n"
-"The default language if not specified by the browser.\n"
-"If not specified, the current locale is used.</p>\n"
-"<p>\n"
-"<i>ex</i>: en</p>\n"
-msgstr ""
-"<b>Výchozí jazyk (DefaultLanguage)</b>\n"
-"<p>\n"
-"Výchozí jazyk, pokud není specifikován prohlížečem.\n"
-"Pokud není specifikován, tak se použije jazyk locale.</p>\n"
-"<p>\n"
-"<i>např</i>.: en</p>\n"
-
-#: cupsd.conf.template.cpp:56
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Document directory (DocumentRoot)</b>\n"
-"<p>\n"
-"The root directory for HTTP documents that are served.\n"
-"By default the compiled-in directory.</p>\n"
-"<p>\n"
-"<i>ex</i>: /usr/share/cups/doc</p>\n"
-msgstr ""
-"<b>Adresář s dokumenty (DocumentRoot)</b>\n"
-"<p>\n"
-"Kořenový adresář pro přístupné HTTP dokumenty.\n"
-"Ve výchozím nastavení se jedná o adresář, kam byl CUPS zkompilován.</p>\n"
-"<p>\n"
-"<i>např</i>.: /usr/share/cups/doc</p>\n"
-
-#: cupsd.conf.template.cpp:64
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Error log (ErrorLog)</b>\n"
-"<p>\n"
-"The error log file; if this does not start with a leading /\n"
-"then it is assumed to be relative to ServerRoot.  By default set to\n"
-"\"/var/log/cups/error_log\".</p>\n"
-"<p>\n"
-"You can also use the special name <b>syslog</b> to send the output to the\n"
-"syslog file or daemon.</p>\n"
-"<p>\n"
-"<i>ex</i>: /var/log/cups/error_log</p>\n"
-msgstr ""
-"<b>Záznam o chybách (ErrorLog)</b>\n"
-"<p>\n"
-"Soubor pro záznamy o chybách; pokud není na začátku /,\n"
-"pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
-"Výchozí nastavení je \"/var/log/cups/error_log\".</p>\n"
-"<p>\n"
-"Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
-"předáván souboru nebo démonu syslog.</p>\n"
-"<p>\n"
-"<i>např</i>.: /var/log/cups/error_log</p>\n"
-
-#: cupsd.conf.template.cpp:76
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Font path (FontPath)</b>\n"
-"<p>\n"
-"The path to locate all font files (currently only for pstoraster).\n"
-"By default /usr/share/cups/fonts.</p>\n"
-"<p>\n"
-"<i>ex</i>: /usr/share/cups/fonts</p>\n"
-msgstr ""
-"<b>Cesta k písmům (FontPath)</b>\n"
-"<p>\n"
-"Cesta ke všem souborům s písmy (aktuálně pouze pro pstoraster).\n"
-"Výchozí nastavení je /usr/share/cups/fonts.</p>\n"
-"<p>\n"
-"<i>např</i>.: /usr/share/cups/fonts</p>\n"
-
-#: cupsd.conf.template.cpp:84
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Log level (LogLevel)</b>\n"
-"<p>\n"
-"Controls the number of messages logged to the ErrorLog\n"
-"file and can be one of the following:</p>\n"
-"<ul type=circle>\n"
-"<li><i>debug2</i>:     Log everything.</li>\n"
-"<li><i>debug</i>:     Log almost everything.</li>\n"
-"<li><i>info</i>:      Log all requests and state changes.</li>\n"
-"<li><i>warn</i>:      Log errors and warnings.</li>\n"
-"<li><i>error</i>:     Log only errors.</li>\n"
-"<li><i>none</i>:      Log nothing.</li>\n"
-"</ul>"
-"<p>\n"
-"<i>ex</i>: info</p>\n"
-msgstr ""
-"<b>Úroveň zaznamenávání (LogLevel)</b>\n"
-"<p>\n"
-"Nastavení počtu zpráv, které mají být zaznamenány do souboru\n"
-"ErrorLog. Možnosti jsou následující:</p>\n"
-"<ul type=circle>\n"
-"<li><i>Podrobné ladění</i>:     Zaznamenává se vše.</li>\n"
-"<li><i>Ladící informace</i>:     Zaznamenává se téměř vše.</li>\n"
-"<li><i>Obecné informace</i>:      Zaznamenávají se všechny požadavky a změny "
-"stavu.</li>\n"
-"<li><i>Varování</i>:      Zaznamenávají se chyby a varování.</li>\n"
-"<li><i>Chyby</i>:     Zaznamenávaji se pouze chyby.</li>\n"
-"<li><i>Bez záznamu</i>:      Nezaznamenává se nic.</li>\n"
-"</ul>"
-"<p>\n"
-"<i>např</i>.: Obecné informace</p>\n"
-
-#: cupsd.conf.template.cpp:99
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max log size (MaxLogSize)</b>\n"
-"<p>\n"
-"Controls the maximum size of each log file before they are\n"
-"rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.</p>\n"
-"<p>\n"
-"<i>ex</i>: 1048576</p>\n"
-msgstr ""
-"<b>Max. velikost souborů se záznamy (MaxLogSize)</b>\n"
-"<p>\n"
-"Nastavení maximální velikosti pro každý soubor se záznamy před tím,\n"
-"než bude zrotován.  Výchozí nastavení je 1048576 (1MB).  Nastavení 0 zruší\n"
-"rotování souborů se záznamy.</p>\n"
-"<p> <i>např</i>.: 1048576</p>\n"
-
-#: cupsd.conf.template.cpp:107
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Page log (PageLog)</b>\n"
-"<p>\n"
-"The page log file; if this does not start with a leading /\n"
-"then it is assumed to be relative to ServerRoot.  By default set to\n"
-"\"/var/log/cups/page_log\".</p>\n"
-"<p>\n"
-"You can also use the special name <b>syslog</b> to send the output to the\n"
-"syslog file or daemon.</p>\n"
-"<p>\n"
-"<i>ex</i>: /var/log/cups/page_log</p>\n"
-msgstr ""
-"<b>Záznam o stránkách (PageLog)</b>\n"
-"<p>\n"
-"Soubor pro záznamy o stránkách; pokud není na začátku /,\n"
-"pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
-"Výchozí nastavení je \"/var/log/cups/page_log\".</p>\n"
-"<p>\n"
-"Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
-"předáván souboru nebo démonu syslog.</p>\n"
-"<p>\n"
-"<i>např</i>.: /var/log/cups/page_log</p>\n"
-
-#: cupsd.conf.template.cpp:119
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Preserve job history (PreserveJobHistory)</b>\n"
-"<p>\n"
-"Whether or not to preserve the job history after a\n"
-"job is completed, canceled, or stopped.  Default is Yes.</p>\n"
-"<p>\n"
-"<i>ex</i>: Yes</p>\n"
-msgstr ""
-"<b>Uchovávat historii úloh (PreserveJobHistory)</b>\n"
-"<p>\n"
-"Zda se má, či nemá uchovávat historie úloh po jejich\n"
-"splnění, zrušení nebo zastavení.  Výchozí hodnota je Ano</p>\n"
-"<p> \n"
-"<i>např</i>.: Ano</p>\n"
-
-#: cupsd.conf.template.cpp:127
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Preserve job files (PreserveJobFiles)</b>\n"
-"<p>\n"
-"Whether or not to preserve the job files after a\n"
-"job is completed, canceled, or stopped.  Default is No.</p>\n"
-"<p>\n"
-"<i>ex</i>: No</p>\n"
-msgstr ""
-"<b>Uchovávat soubory úloh (PreserveJobFiles)</b>\n"
-"<p>\n"
-"Zda se mají, či nemají uchovávat soubory úloh po jejich\n"
-"splnění, zrušení nebo zastavení.  Výchozí hodnota je Ne</p>\n"
-"<p> \n"
-"<i>např</i>.: Ne</p>\n"
-
-#: cupsd.conf.template.cpp:135
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Printcap file (Printcap)</b>\n"
-"<p>\n"
-"The name of the printcap file.  Default is no filename.\n"
-"Leave blank to disable printcap file generation.</p>\n"
-"<p>\n"
-"<i>ex</i>: /etc/printcap</p>\n"
-msgstr ""
-"<b>Soubor printcap (Printcap)</b>\n"
-"<p>\n"
-"Název souboru printcap. Výchozí nastavení je bez názvu souboru.\n"
-"Pokud chcete zakázat používání souboru printcap, tak nechejte toto pole "
-"volné.</p>\n"
-"<p>\n"
-"<i>např</i>.: /etc/printcap</p>\n"
-
-#: cupsd.conf.template.cpp:143
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Request directory (RequestRoot)</b>\n"
-"<p>\n"
-"The directory where request files are stored.\n"
-"By default /var/spool/cups.</p>\n"
-"<p>\n"
-"<i>ex</i>: /var/spool/cups</p>\n"
-msgstr ""
-"<b>Adresář s požadavky (RequestRoot)</b>\n"
-"<p>\n"
-"Adresář, kde mají být uchovávany soubory s požadavky.\n"
-"Výchozí nastavení je /var/spool/cups.</p>\n"
-"<p>\n"
-"<i>např</i>.: /var/spool/cups</p>\n"
-
-#: cupsd.conf.template.cpp:151
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Remote root user (RemoteRoot)</b>\n"
-"<p>\n"
-"The name of the user assigned to unauthenticated accesses\n"
-"from remote systems.  By default \"remroot\".</p>\n"
-"<p>\n"
-"<i>ex</i>: remroot</p>\n"
-msgstr ""
-"<b>Jméno vzdáleného správce (RemoteRoot)</b>\n"
-"<p>\n"
-"Jméno uživatele, kterému jsou přiděleny neautentikované přístupy\n"
-"ze vzdálených systémů.  Výchozí nastavení je \"remroot\".</p>\n"
-"<p>\n"
-"<i>např</i>.: remroot</p>\n"
-
-#: cupsd.conf.template.cpp:159
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Server binaries (ServerBin)</b>\n"
-"<p>\n"
-"The root directory for the scheduler executables.\n"
-"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).</p>\n"
-"<p>\n"
-"<i>ex</i>: /usr/lib/cups</p>\n"
-msgstr ""
-"<b>Binární soubory serveru (ServerBin)</b>\n"
-"<p>\n"
-"Kořenový adresář pro spustitelné soubory plánovače.\n"
-"Výchozí nastavení je /usr/lib/cups nebo /usr/lib32/cups (IRIX 6.5).</p>\n"
-"<p>\n"
-"<i>např</i>: /usr/lib/cups</p>\n"
-
-#: cupsd.conf.template.cpp:167
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Server files (ServerRoot)</b>\n"
-"<p>\n"
-"The root directory for the scheduler.\n"
-"By default /etc/cups.</p>\n"
-"<p>\n"
-"<i>ex</i>: /etc/cups</p>\n"
-msgstr ""
-"<b>Soubory serveru (ServerRoot)</b>\n"
-"<p>\n"
-"Kořenový adresář pro plánovač.\n"
-"Výchozí nastavení je /etc/cups.</p>\n"
-"<p>\n"
-"<i>např</i>: /etc/cups</p>\n"
-
-#: cupsd.conf.template.cpp:175
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>User (User)</b>\n"
-"<p>\n"
-"The user the server runs under.  Normally this\n"
-"must be <b>lp</b>, however you can configure things for another user\n"
-"as needed.</p>\n"
-"<p>\n"
-"Note: the server must be run initially as root to support the\n"
-"default IPP port of 631.  It changes users whenever an external\n"
-"program is run...</p>\n"
-"<p>\n"
-"<i>ex</i>: lp</p>\n"
-msgstr ""
-"<b>Uživatel (User)</b>\n"
-"<p>\n"
-"Uživatel, pod kterým běží server. Obvykle to musí být\n"
-"<b>lp</b>, ale v případě potřeby si můžete nastavit jiného\n"
-"uživatele.</p>\n"
-"<p>\n"
-"Poznámka: server se musí inicializovat s uživatelem root, aby mohl\n"
-"poslouchat na výchozím port IPP 631. Změní uživatele jakmile běží\n"
-"externí program...</p>\n"
-"<p>\n"
-"<i>např</i>.: lp</p>\n"
-
-#: cupsd.conf.template.cpp:188
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Group (Group)</b>\n"
-"<p>\n"
-"The group the server runs under.  Normally this\n"
-"must be <b>sys</b>, however you can configure things for another\n"
-"group as needed.</p>\n"
-"<p>\n"
-"<i>ex</i>: sys</p>\n"
-msgstr ""
-"<b>Skupina (Group)</b>\n"
-"<p>\n"
-"Skupina, pod kterou běží server. Obvykle to musí být\n"
-"<b>sys</b>, ale v případě potřeby si můžete nastavit jinou\n"
-"skupinu.</p>\n"
-"<p>\n"
-"<i>např</i>.: sys</p>\n"
-
-#: cupsd.conf.template.cpp:197
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>RIP cache (RIPCache)</b>\n"
-"<p>\n"
-"The amount of memory that each RIP should use to cache\n"
-"bitmaps.  The value can be any real number followed by \"k\" for\n"
-"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n"
-"(1 tile = 256x256 pixels).  Defaults to \"8m\" (8 megabytes).</p>\n"
-"<p>\n"
-"<i>ex</i>: 8m</p>\n"
-msgstr ""
-"<b>Vyrovnávací paměť pro RIP (RIPCache)</b>\n"
-"<p>\n"
-"Množství paměti, které může každé RIP použít jako cache\n"
-"pro bitmapy.  Hotnota může být jakékoliv reálné číslo a za ním \"k\"\n"
-"pro kilobajty, \"m\" pro megabajty, \"g\" pro gigabajty nebo \"t\" pro "
-"dlaždice\n"
-"(1 dlaždice = 256x256 pixelů). Výchozí nastavení je \"8m\" (8 megabajtů).</p>\n"
-"<p>\n"
-"<i>např</i>.: 8m</p>\n"
-
-#: cupsd.conf.template.cpp:207
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Temporary files (TempDir)</b>\n"
-"<p>\n"
-"The directory to put temporary files in. This directory must be\n"
-"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
-"the value of the TMPDIR environment variable.</p>\n"
-"<p>\n"
-"<i>ex</i>: /var/spool/cups/tmp</p>\n"
-msgstr ""
-"<b>Dočasné soubory (TempDir)</b>\n"
-"<p>\n"
-"Adresář pro dočasné soubory. Adresář musí mít možnost\n"
-"zápisu pro výše zmíněného uživatele!  Výchozí nastavení je\n"
-"\"/var/spool/cups/tmp\" nebo hodnota TMPDIR pro použití systémové\n"
-"proměnné.</p>\n"
-"<p>\n"
-"<i>např</i>.: /var/spool/cups/tmp</p>\n"
-
-#: cupsd.conf.template.cpp:216
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Filter limit (FilterLimit)</b>\n"
-"<p>\n"
-"Sets the maximum cost of all job filters that can be run\n"
-"at the same time.  A limit of 0 means no limit.  A typical job may need\n"
-"a filter limit of at least 200; limits less than the minimum required\n"
-"by a job force a single job to be printed at any time.</p>\n"
-"<p>\n"
-"The default limit is 0 (unlimited).</p>\n"
-"<p>\n"
-"<i>ex</i>: 200</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:228
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Listen to (Port/Listen)</b>\n"
-"<p>\n"
-"Ports/addresses that are listened to.  The default port 631 is reserved\n"
-"for the Internet Printing Protocol (IPP) and is what is used here.</p>\n"
-"<p>\n"
-"You can have multiple Port/Listen lines to listen to more than one\n"
-"port or address, or to restrict access.</p>\n"
-"<p>\n"
-"Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n"
-"for encryption.  If you want to support web-based encryption you will\n"
-"probably need to listen on port 443 (the \"HTTPS\" port...).</p>\n"
-"<p>\n"
-"<i>ex</i>: 631, myhost:80, 1.2.3.4:631</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:243
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Hostname lookups (HostNameLookups)</b>\n"
-"<p>\n"
-"Whether or not to do lookups on IP addresses to get a\n"
-"fully-qualified hostname.  This defaults to Off for performance reasons...</p>\n"
-"<p>\n"
-"<i>ex</i>: On</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:251
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Keep alive (KeepAlive)</b>\n"
-"<p>\n"
-"Whether or not to support the Keep-Alive connection\n"
-"option.  Default is on.</p>\n"
-"<p>\n"
-"<i>ex</i>: On</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:259
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Keep-alive timeout (KeepAliveTimeout)</b>\n"
-"<p>\n"
-"The timeout (in seconds) before Keep-Alive connections are\n"
-"automatically closed.  Default is 60 seconds.</p>\n"
-"<p>\n"
-"<i>ex</i>: 60</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:267
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max clients (MaxClients)</b>\n"
-"<p>\n"
-"Controls the maximum number of simultaneous clients that\n"
-"will be handled.  Defaults to 100.</p>\n"
-"<p>\n"
-"<i>ex</i>: 100</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:275
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max request size (MaxRequestSize)</b>\n"
-"<p>\n"
-"Controls the maximum size of HTTP requests and print files.\n"
-"Set to 0 to disable this feature (defaults to 0).</p>\n"
-"<p>\n"
-"<i>ex</i>: 0</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:283
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Client timeout (Timeout)</b>\n"
-"<p>\n"
-"The timeout (in seconds) before requests time out.  Default is 300 seconds.</p>"
-"\n"
-"<p>\n"
-"<i>ex</i>: 300</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:290
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Use browsing (Browsing)</b>\n"
-"<p>\n"
-"Whether or not to <b>listen</b> to printer \n"
-"information from other CUPS servers.  \n"
-"</p>\n"
-"<p>\n"
-"Enabled by default.\n"
-"</p>\n"
-"<p>\n"
-"Note: to enable the <b>sending</b> of browsing\n"
-"information from this CUPS server to the LAN,\n"
-"specify a valid <i>BrowseAddress</i>.\n"
-"</p>\n"
-"<p>\n"
-"<i>ex</i>: On</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:307
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Use short names (BrowseShortNames)</b>\n"
-"<p>\n"
-"Whether or not to use \"short\" names for remote printers\n"
-"when possible (e.g. \"printer\" instead of \"printer@host\").  Enabled by\n"
-"default.</p>\n"
-"<p>\n"
-"<i>ex</i>: Yes</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:316
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse addresses (BrowseAddress)</b>\n"
-"<p>\n"
-"Specifies a broadcast address to be used.  By\n"
-"default browsing information is broadcast to all active interfaces.</p>\n"
-"<p>\n"
-"Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n"
-"you have a Class A, B, C, or D netmask (i.e. no CIDR support).</p>\n"
-"<p>\n"
-"<i>ex</i>: x.y.z.255, x.y.255.255</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:327
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse allow/deny (BrowseAllow/BrowseDeny)</b>\n"
-"<p>\n"
-"<u>BrowseAllow</u>: specifies an address mask to allow for incoming browser\n"
-"packets. The default is to allow packets from all addresses.</p>\n"
-"<p>\n"
-"<u>BrowseDeny</u>: specifies an address mask to deny for incoming browser\n"
-"packets. The default is to deny packets from no addresses.</p>\n"
-"<p>\n"
-"Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n"
-"addresses:</p>\n"
-"<pre>\n"
-"All\n"
-"None\n"
-"*.domain.com\n"
-".domain.com\n"
-"host.domain.com\n"
-"nnn.*\n"
-"nnn.nnn.*\n"
-"nnn.nnn.nnn.*\n"
-"nnn.nnn.nnn.nnn\n"
-"nnn.nnn.nnn.nnn/mm\n"
-"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-"</pre>"
-"<p>\n"
-"The hostname/domainname restrictions only work if you have turned hostname\n"
-"lookups on!</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:354
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse interval (BrowseInterval)</b>\n"
-"<p>\n"
-"The time between browsing updates in seconds.  Default\n"
-"is 30 seconds.</p>\n"
-"<p>\n"
-"Note that browsing information is sent whenever a printer's state changes\n"
-"as well, so this represents the maximum time between updates.</p>\n"
-"<p>\n"
-"Set this to 0 to disable outgoing broadcasts so your local printers are\n"
-"not advertised but you can still see printers on other hosts.</p>\n"
-"<p>\n"
-"<i>ex</i>: 30</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:368
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse order (BrowseOrder)</b>\n"
-"<p>\n"
-"Specifies the order of BrowseAllow/BrowseDeny comparisons.</p>\n"
-"<p>\n"
-"<i>ex</i>: allow,deny</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:375
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse poll (BrowsePoll)</b>\n"
-"<p>\n"
-"Poll the named server(s) for printers.</p>\n"
-"<p>\n"
-"<i>ex</i>: myhost:631</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:382
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse port (BrowsePort)</b>\n"
-"<p>\n"
-"The port used for UDP broadcasts.  By default this is\n"
-"the IPP port; if you change this you need to do it on all servers.\n"
-"Only one BrowsePort is recognized.</p>\n"
-"<p>\n"
-"<i>ex</i>: 631</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:391
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse relay (BrowseRelay)</b>\n"
-"<p>\n"
-"Relay browser packets from one address/network to another.</p>\n"
-"<p>\n"
-"<i>ex</i>: src-address dest-address</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:398
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse timeout (BrowseTimeout)</b>\n"
-"<p>\n"
-"The timeout (in seconds) for network printers - if we don't\n"
-"get an update within this time the printer will be removed\n"
-"from the printer list.  This number definitely should not be\n"
-"less the BrowseInterval value for obvious reasons.  Defaults\n"
-"to 300 seconds.</p>\n"
-"<p>\n"
-"<i>ex</i>: 300</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:409
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Implicit classes (ImplicitClasses)</b>\n"
-"<p>\n"
-"Whether or not to use implicit classes.</p>\n"
-"<p>\n"
-"Printer classes can be specified explicitly in the classes.conf\n"
-"file, implicitly based upon the printers available on the LAN, or\n"
-"both.</p>\n"
-"<p>\n"
-"When ImplicitClasses is On, printers on the LAN with the same name\n"
-"(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n"
-"name. This allows you to setup multiple redundant queues on a LAN\n"
-"without a lot of administrative difficulties.  If a user sends a\n"
-"job to Acme-LaserPrint-1000, the job will go to the first available\n"
-"queue.</p>\n"
-"<p>\n"
-"Enabled by default.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:427
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>System group (SystemGroup)</b>\n"
-"<p>\n"
-"The group name for \"System\" (printer administration)\n"
-"access.  The default varies depending on the operating system, but\n"
-"will be <b>sys</b>, <b>system</b>, or <b>root</b> (checked for in that "
-"order).</p>\n"
-"<p>\n"
-"<i>ex</i>: sys</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:436
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Encryption certificate (ServerCertificate)</b>\n"
-"<p>\n"
-"The file to read containing the server's certificate.\n"
-"Defaults to \"/etc/cups/ssl/server.crt\".</p>\n"
-"<p>\n"
-"<i>ex</i>: /etc/cups/ssl/server.crt</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:444
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Encryption key (ServerKey)</b>\n"
-"<p>\n"
-"The file to read containing the server's key.\n"
-"Defaults to \"/etc/cups/ssl/server.key\".</p>\n"
-"<p>\n"
-"<i>ex</i>: /etc/cups/ssl/server.key</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:452
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"Access permissions\n"
-"# Access permissions for each directory served by the scheduler.\n"
-"Locations are relative to DocumentRoot...\n"
-"# AuthType: the authorization to use:\n"
-"#    None   - Perform no authentication\n"
-"Basic  - Perform authentication using the HTTP Basic method.\n"
-"Digest - Perform authentication using the HTTP Digest method.\n"
-"#    (Note: local certificate authentication can be substituted by\n"
-"the client for Basic or Digest when connecting to the\n"
-"localhost interface)\n"
-"# AuthClass: the authorization class; currently only Anonymous, User,\n"
-"System (valid user belonging to group SystemGroup), and Group\n"
-"(valid user belonging to the specified group) are supported.\n"
-"# AuthGroupName: the group name for \"Group\" authorization.\n"
-"# Order: the order of Allow/Deny processing.\n"
-"# Allow: allows access from the specified hostname, domain, IP address, or\n"
-"network.\n"
-"# Deny: denies access from the specified hostname, domain, IP address, or\n"
-"network.\n"
-"# Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n"
-"#     All\n"
-"None\n"
-"*.domain.com\n"
-".domain.com\n"
-"host.domain.com\n"
-"nnn.*\n"
-"nnn.nnn.*\n"
-"nnn.nnn.nnn.*\n"
-"nnn.nnn.nnn.nnn\n"
-"nnn.nnn.nnn.nnn/mm\n"
-"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-"# The host and domain address require that you enable hostname lookups\n"
-"with \"HostNameLookups On\" above.\n"
-"# Encryption: whether or not to use encryption; this depends on having\n"
-"the OpenSSL library linked into the CUPS library and scheduler.\n"
-"# Possible values:\n"
-"#     Always       - Always use encryption (SSL)\n"
-"Never        - Never use encryption\n"
-"Required     - Use TLS encryption upgrade\n"
-"IfRequested  - Use encryption if the server requests it\n"
-"# The default value is \"IfRequested\".\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:495
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Authentication (AuthType)</b>\n"
-"<p>\n"
-"The authorization to use:"
-"<p>\n"
-"<ul type=circle>\n"
-"<li><i>None</i>   - Perform no authentication.</li>\n"
-"<li><i>Basic</i>  - Perform authentication using the HTTP Basic method.</li>\n"
-"<li><i>Digest</i> - Perform authentication using the HTTP Digest method.</li>\n"
-"</ul>"
-"<p>\n"
-"Note: local certificate authentication can be substituted by\n"
-"the client for <i>Basic</i> or <i>Digest</i> when connecting to the\n"
-"localhost interface.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:508
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Class (AuthClass)</b>\n"
-"<p>\n"
-"The authorization class; currently only <i>Anonymous</i>, <i>User</i>,\n"
-"<i>System</i> (valid user belonging to group SystemGroup), and <i>Group</i>\n"
-"(valid user belonging to the specified group) are supported.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:515
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<p>The user/group names allowed to access the resource. The format is a\n"
-"comma separated list.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:519
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Satisfy (Satisfy)</b>\n"
-"<p>\n"
-"This directive controls whether all specified conditions must\n"
-"be satisfied to allow access to the resource. If set to \"all\",\n"
-"then all authentication and access control conditions must be\n"
-"satisfied to allow access.\n"
-"</p>\n"
-"<p>\n"
-"Setting Satisfy to \"any\" allows a user to gain access if the\n"
-"authentication <i>or</i> access control requirements are satisfied.\n"
-"For example, you might require authentication for remote access,\n"
-"but allow local access without authentication.\n"
-"</p>\n"
-"<p>\n"
-"The default is \"all\".\n"
-"</p> \n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:537
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Authentication group name (AuthGroupName)</b>\n"
-"<p>\n"
-"The group name for <i>Group</i> authorization.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:542
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>ACL order (Order)</b>\n"
-"<p>\n"
-"The order of Allow/Deny processing.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:547
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Allow</b>\n"
-"<p>\n"
-"Allows access from the specified hostname, domain, IP address, or\n"
-"network. Possible values are:</p>\n"
-"<pre>\n"
-"All\n"
-"None\n"
-"*.domain.com\n"
-".domain.com\n"
-"host.domain.com\n"
-"nnn.*\n"
-"nnn.nnn.*\n"
-"nnn.nnn.nnn.*\n"
-"nnn.nnn.nnn.nnn\n"
-"nnn.nnn.nnn.nnn/mm\n"
-"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-"</pre>"
-"<p>\n"
-"The host and domain address require that you enable hostname lookups\n"
-"with \"HostNameLookups On\" above.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:568
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>ACL addresses (Allow/Deny)</b>\n"
-"<p>\n"
-"Allows/Denies access from the specified hostname, domain, IP address, or\n"
-"network. Possible values are:</p>\n"
-"<pre>\n"
-"All\n"
-"None\n"
-"*.domain.com\n"
-".domain.com\n"
-"host.domain.com\n"
-"nnn.*\n"
-"nnn.nnn.*\n"
-"nnn.nnn.nnn.*\n"
-"nnn.nnn.nnn.nnn\n"
-"nnn.nnn.nnn.nnn/mm\n"
-"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-"</pre>"
-"<p>\n"
-"The host and domain address require that you enable hostname lookups\n"
-"with \"HostNameLookups On\" above.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:589
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Encryption (Encryption)</b>\n"
-"<p>\n"
-"Whether or not to use encryption; this depends on having\n"
-"the OpenSSL library linked into the CUPS library and scheduler.</p>\n"
-"<p>\n"
-"Possible values:</p>\n"
-"<ul type=circle>\n"
-"<li><i>Always</i>       - Always use encryption (SSL)</li>\n"
-"<li><i>Never</i>        - Never use encryption</li>\n"
-"<li><i>Required</i>     - Use TLS encryption upgrade</li>\n"
-"<li><i>IfRequested</i>  - Use encryption if the server requests it</li>\n"
-"</ul>"
-"<p>\n"
-"The default value is \"IfRequested\".</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:604
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Access permissions</b>\n"
-"<p>\n"
-"Access permissions for each directory served by the scheduler.\n"
-"Locations are relative to DocumentRoot...</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:610
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Auto purge jobs (AutoPurgeJobs)</b>\n"
-"<p>\n"
-"Automatically purge jobs when not needed for quotas.\n"
-"Default is No.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:616
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Browse protocols (BrowseProtocols)</b>\n"
-"<p>\n"
-"Which protocols to use for browsing.  Can be\n"
-"any of the following separated by whitespace and/or commas:</p>\n"
-"<ul type=circle>\n"
-"<li><i>all</i>  - Use all supported protocols.</li>\n"
-"<li><i>cups</i> - Use the CUPS browse protocol.</li>\n"
-"<li><i>slp</i>  - Use the SLPv2 protocol.</li>\n"
-"</ul>"
-"<p>\n"
-"The default is <b>cups</b>.</p>\n"
-"<p>\n"
-"Note: If you choose to use SLPv2, it is <b>strongly</b> recommended that\n"
-"you have at least one SLP Directory Agent (DA) on your\n"
-"network.  Otherwise, browse updates can take several seconds,\n"
-"during which the scheduler will not response to client\n"
-"requests.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:634
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Classification (Classification)</b>\n"
-"<p>\n"
-"The classification level of the server.  If set, this\n"
-"classification is displayed on all pages, and raw printing is disabled.\n"
-"The default is the empty string.</p>\n"
-"<p>\n"
-"<i>ex</i>: confidential\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:643
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Allow overrides (ClassifyOverride)</b>\n"
-"<p>\n"
-"Whether to allow users to override the classification\n"
-"on printouts. If enabled, users can limit banner pages to before or\n"
-"after the job, and can change the classification of a job, but cannot\n"
-"completely eliminate the classification or banners.</p>\n"
-"<p>\n"
-"The default is off.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:653
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Hide implicit members (HideImplicitMembers)</b>\n"
-"<p>\n"
-"Whether or not to show the members of an\n"
-"implicit class.</p>\n"
-"<p>\n"
-"When HideImplicitMembers is On, any remote printers that are\n"
-"part of an implicit class are hidden from the user, who will\n"
-"then only see a single queue even though many queues will be\n"
-"supporting the implicit class.</p>\n"
-"<p>\n"
-"Enabled by default.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:666
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Use &quot;any&quot; classes (ImplicitAnyClasses)</b>\n"
-"<p>\n"
-"Whether or not to create <b>AnyPrinter</b> implicit\n"
-"classes.</p>\n"
-"<p>\n"
-"When ImplicitAnyClasses is On and a local queue of the same name\n"
-"exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n"
-"an implicit class called \"Anyprinter\" is created instead.</p>\n"
-"<p>\n"
-"When ImplicitAnyClasses is Off, implicit classes are not created\n"
-"when there is a local queue of the same name.</p>\n"
-"<p>\n"
-"Disabled by default.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:681
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max jobs (MaxJobs)</b>\n"
-"<p>\n"
-"Maximum number of jobs to keep in memory (active and completed).\n"
-"Default is 0 (no limit).</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:687
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max jobs per user (MaxJobsPerUser)</b>\n"
-"<p>\n"
-"The MaxJobsPerUser directive controls the maximum number of <i>active</i>\n"
-"jobs that are allowed for each user. Once a user reaches the limit, new\n"
-"jobs will be rejected until one of the active jobs is completed, stopped,\n"
-"aborted, or canceled.</p>\n"
-"<p>\n"
-"Setting the maximum to 0 disables this functionality.\n"
-"Default is 0 (no limit).\n"
-"</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:699
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Max jobs per printer (MaxJobsPerPrinter)</b>\n"
-"<p>\n"
-"The MaxJobsPerPrinter directive controls the maximum number of <i>active</i>\n"
-"jobs that are allowed for each printer or class. Once a printer or class\n"
-"reaches the limit, new jobs will be rejected until one of the active jobs\n"
-"is completed, stopped, aborted, or canceled.</p>\n"
-"<p>\n"
-"Setting the maximum to 0 disables this functionality.\n"
-"Default is 0 (no limit).\n"
-"</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:711
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Port</b>\n"
-"<p>\n"
-"The port value that the CUPS daemon is listening to. Default is 631.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:716
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<b>Address</b>\n"
-"<p>\n"
-"The address that the CUPS daemon is listening at. Leave it empty or use\n"
-"an asterisk (*) to specify a port value on the entire subnetwork.</p>\n"
-msgstr ""
-
-#: cupsd.conf.template.cpp:722
-msgid ""
-"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, "
-"etc.)\n"
-"<p>Check this box if you want to use SSL encryption with this address/port.\n"
-"</p>\n"
-msgstr ""
-
 #: cupsdbrowsingpage.cpp:37
 msgid "Browsing"
 msgstr "Prohlížení"
@@ -1312,58 +131,58 @@ msgstr "Pořadí prohlížení:"
 msgid "Browse options:"
 msgstr "Volby pro prohlížení:"
 
-#: cupsdconf.cpp:811 cupsdconf.cpp:834 cupsdconf.cpp:850
+#: cupsdconf.cpp:847 cupsdconf.cpp:870 cupsdconf.cpp:886
 msgid ""
 "_: Base\n"
 "Root"
 msgstr "Báze"
 
-#: cupsdconf.cpp:811 cupsdconf.cpp:831 cupsdconf.cpp:852
+#: cupsdconf.cpp:847 cupsdconf.cpp:867 cupsdconf.cpp:888
 msgid "All printers"
 msgstr "Všechny tiskárny"
 
-#: cupsdconf.cpp:811 cupsdconf.cpp:832 cupsdconf.cpp:853
+#: cupsdconf.cpp:847 cupsdconf.cpp:868 cupsdconf.cpp:889
 msgid "All classes"
 msgstr "Všechny třídy"
 
-#: cupsdconf.cpp:811 cupsdconf.cpp:833 cupsdconf.cpp:855
+#: cupsdconf.cpp:847 cupsdconf.cpp:869 cupsdconf.cpp:891
 msgid "Print jobs"
 msgstr "Tiskové úkoly"
 
-#: cupsdconf.cpp:812 cupsdconf.cpp:830 cupsdconf.cpp:851
+#: cupsdconf.cpp:848 cupsdconf.cpp:866 cupsdconf.cpp:887
 msgid "Administration"
 msgstr "Správa"
 
-#: cupsdconf.cpp:813 cupsdconf.cpp:840 cupsdconf.cpp:843 cupsdconf.cpp:864
+#: cupsdconf.cpp:849 cupsdconf.cpp:876 cupsdconf.cpp:879 cupsdconf.cpp:900
 msgid "Class"
 msgstr "Třída"
 
-#: cupsdconf.cpp:814 cupsdconf.cpp:835 cupsdconf.cpp:838 cupsdconf.cpp:858
+#: cupsdconf.cpp:850 cupsdconf.cpp:871 cupsdconf.cpp:874 cupsdconf.cpp:894
 msgid "Printer"
 msgstr "Tiskárna"
 
-#: cupsdconf.cpp:854
+#: cupsdconf.cpp:890
 msgid "Root"
 msgstr "Báze"
 
-#: cupsddialog.cpp:113
+#: cupsddialog.cpp:114
 msgid "Short Help"
 msgstr "Krátká nápověda"
 
-#: cupsddialog.cpp:126
+#: cupsddialog.cpp:127
 msgid "CUPS Server Configuration"
 msgstr "Nastavení CUPS serveru"
 
-#: cupsddialog.cpp:173
+#: cupsddialog.cpp:174
 msgid "Error while loading configuration file!"
 msgstr "Chyba při načítání konfiguračního souboru!"
 
-#: cupsddialog.cpp:173 cupsddialog.cpp:192 cupsddialog.cpp:258
-#: cupsddialog.cpp:313
+#: cupsddialog.cpp:174 cupsddialog.cpp:193 cupsddialog.cpp:254
+#: cupsddialog.cpp:309
 msgid "CUPS Configuration Error"
 msgstr "Chyba nastavení CUPSu"
 
-#: cupsddialog.cpp:182
+#: cupsddialog.cpp:183
 msgid ""
 "Some options were not recognized by this configuration tool. They will be left "
 "untouched and you won't be able to change them."
@@ -1371,19 +190,19 @@ msgstr ""
 "Některé volby nebyly konfiguračním nástrojem rozpoznány. Zůstanou nezměněné a "
 "vy je nebudete mít možnost upravovat."
 
-#: cupsddialog.cpp:184
+#: cupsddialog.cpp:185
 msgid "Unrecognized Options"
 msgstr "Nerozpoznané volby"
 
-#: cupsddialog.cpp:204
+#: cupsddialog.cpp:205
 msgid "Unable to find a running CUPS server"
 msgstr "Není možné nalézt běžící CUPS server"
 
-#: cupsddialog.cpp:218
+#: cupsddialog.cpp:214
 msgid "Unable to restart CUPS server (pid = %1)"
 msgstr "Není možné restartovat CUPS server (pid = %1)"
 
-#: cupsddialog.cpp:239
+#: cupsddialog.cpp:235
 msgid ""
 "Unable to retrieve configuration file from the CUPS server. You probably don't "
 "have the access permissions to perform this operation."
@@ -1391,22 +210,22 @@ msgstr ""
 "Nelze získat soubor s nastavením pro CUPS server. Pravděpodobně nemáte "
 "oprávnění k provedení této operace."
 
-#: cupsddialog.cpp:249
+#: cupsddialog.cpp:245
 msgid "Internal error: file '%1' not readable/writable!"
 msgstr "Vnitřní chyba: soubor '%1' nelze přečíst/zapsat!"
 
-#: cupsddialog.cpp:252
+#: cupsddialog.cpp:248
 msgid "Internal error: empty file '%1'!"
 msgstr "Vnitřní chyba: soubor '%1' je prázdný!"
 
-#: cupsddialog.cpp:270
+#: cupsddialog.cpp:266
 msgid ""
 "The config file has not been uploaded to the CUPS server. The daemon will not "
 "be restarted."
 msgstr ""
 "Soubor s nastavením nebyl nahrán k CUPS serveru. Služba nebude restartována."
 
-#: cupsddialog.cpp:274
+#: cupsddialog.cpp:270
 msgid ""
 "Unable to upload the configuration file to CUPS server. You probably don't have "
 "the access permissions to perform this operation."
@@ -1414,11 +233,11 @@ msgstr ""
 "Nelze nahrát soubor s nastavením k CUPS serveru. Pravděpodobně nemáte oprávnění "
 "k provedení této operace."
 
-#: cupsddialog.cpp:277
+#: cupsddialog.cpp:273
 msgid "CUPS configuration error"
 msgstr "Chyba nastavení CUPSu"
 
-#: cupsddialog.cpp:308
+#: cupsddialog.cpp:304
 #, c-format
 msgid "Unable to write configuration file %1"
 msgstr "Není možné zapsat konfigurační soubor %1"
@@ -1869,3 +688,434 @@ msgstr "GB"
 #: sizewidget.cpp:37
 msgid "Tiles"
 msgstr "Dlaždic"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Server name (ServerName)</b>\n"
+#~ "<p>\n"
+#~ "The hostname of your server, as advertised to the world.\n"
+#~ "By default CUPS will use the hostname of the system.</p>\n"
+#~ "<p>\n"
+#~ "To set the default server used by clients, see the client.conf file.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: myhost.domain.com</p>\n"
+#~ msgstr ""
+#~ "<b>Jméno serveru (ServerName)</b>\n"
+#~ "<p>\n"
+#~ "Jméno vašeho serveru, jak se hlásí okolnímu světu.\n"
+#~ "Ve výchozím nastavení CUPS použije jméno vašeho systému.</p>\n"
+#~ "<p>\n"
+#~ "Pro nastavení výchozího serveru používaného klienty se podívejte do souboru client.conf.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: myhost.domain.cz</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Server administrator (ServerAdmin)</b>\n"
+#~ "<p>\n"
+#~ "The email address to send all complaints or problems to.\n"
+#~ "By default CUPS will use \"root@hostname\".</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: root@myhost.com</p>\n"
+#~ msgstr ""
+#~ "<b>Správce serveru (ServerAdmi</b>\n"
+#~ "<p>\n"
+#~ "Emailová adresa sloužící k zasílání všech problémů a připomínek.\n"
+#~ "Ve výchozím nastavení CUPS použije \"root@hostname\"</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: root@myhost.cz</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Access log (AccessLog)</b>\n"
+#~ "<p>\n"
+#~ "The access log file; if this does not start with a leading /\n"
+#~ "then it is assumed to be relative to ServerRoot.  By default set to\n"
+#~ "\"/var/log/cups/access_log\".</p>\n"
+#~ "<p>\n"
+#~ "You can also use the special name <b>syslog</b> to send the output to the\n"
+#~ "syslog file or daemon.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /var/log/cups/access_log</p>\n"
+#~ msgstr ""
+#~ "<b>Záznam o přístupu (AccessLog)</b>\n"
+#~ "<p>\n"
+#~ "Soubor pro záznamy o přístupu; pokud není na začátku /,\n"
+#~ "pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
+#~ "Výchozí nastavení je \"/var/log/cups/access_log\".</p>\n"
+#~ "<p>\n"
+#~ "Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
+#~ "předáván souboru nebo démonu syslog.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /var/log/cups/access_log</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Data directory (DataDir)</b>\n"
+#~ "<p>\n"
+#~ "The root directory for the CUPS data files.\n"
+#~ "By default /usr/share/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /usr/share/cups</p>\n"
+#~ msgstr ""
+#~ "<b>Adresář s daty (DataDir)</b>\n"
+#~ "<p>\n"
+#~ "Kořenový adresář pro soubory dat CUPS serveru.\n"
+#~ "Výchozí nastavení /usr/share/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /usr/share/cups</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Default character set (DefaultCharset)</b>\n"
+#~ "<p>\n"
+#~ "The default character set to use. If not specified,\n"
+#~ "defaults to utf-8.  Note that this can also be overridden in\n"
+#~ "HTML documents...</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: utf-8</p>\n"
+#~ msgstr ""
+#~ "<b>Výchozí znaková sada (DefaultCharset)</b>\n"
+#~ "<p>\n"
+#~ "Výchozí znaková sada, která se má použít. Pokud není\n"
+#~ "specifikována, je použito utf-8. Nezapomeňte, že toto může být\n"
+#~ "přenastaveno v HTML dokumentech...</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: utf-8</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Default language (DefaultLanguage)</b>\n"
+#~ "<p>\n"
+#~ "The default language if not specified by the browser.\n"
+#~ "If not specified, the current locale is used.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: en</p>\n"
+#~ msgstr ""
+#~ "<b>Výchozí jazyk (DefaultLanguage)</b>\n"
+#~ "<p>\n"
+#~ "Výchozí jazyk, pokud není specifikován prohlížečem.\n"
+#~ "Pokud není specifikován, tak se použije jazyk locale.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: en</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Document directory (DocumentRoot)</b>\n"
+#~ "<p>\n"
+#~ "The root directory for HTTP documents that are served.\n"
+#~ "By default the compiled-in directory.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /usr/share/cups/doc</p>\n"
+#~ msgstr ""
+#~ "<b>Adresář s dokumenty (DocumentRoot)</b>\n"
+#~ "<p>\n"
+#~ "Kořenový adresář pro přístupné HTTP dokumenty.\n"
+#~ "Ve výchozím nastavení se jedná o adresář, kam byl CUPS zkompilován.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /usr/share/cups/doc</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Error log (ErrorLog)</b>\n"
+#~ "<p>\n"
+#~ "The error log file; if this does not start with a leading /\n"
+#~ "then it is assumed to be relative to ServerRoot.  By default set to\n"
+#~ "\"/var/log/cups/error_log\".</p>\n"
+#~ "<p>\n"
+#~ "You can also use the special name <b>syslog</b> to send the output to the\n"
+#~ "syslog file or daemon.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /var/log/cups/error_log</p>\n"
+#~ msgstr ""
+#~ "<b>Záznam o chybách (ErrorLog)</b>\n"
+#~ "<p>\n"
+#~ "Soubor pro záznamy o chybách; pokud není na začátku /,\n"
+#~ "pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
+#~ "Výchozí nastavení je \"/var/log/cups/error_log\".</p>\n"
+#~ "<p>\n"
+#~ "Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
+#~ "předáván souboru nebo démonu syslog.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /var/log/cups/error_log</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Font path (FontPath)</b>\n"
+#~ "<p>\n"
+#~ "The path to locate all font files (currently only for pstoraster).\n"
+#~ "By default /usr/share/cups/fonts.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /usr/share/cups/fonts</p>\n"
+#~ msgstr ""
+#~ "<b>Cesta k písmům (FontPath)</b>\n"
+#~ "<p>\n"
+#~ "Cesta ke všem souborům s písmy (aktuálně pouze pro pstoraster).\n"
+#~ "Výchozí nastavení je /usr/share/cups/fonts.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /usr/share/cups/fonts</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Log level (LogLevel)</b>\n"
+#~ "<p>\n"
+#~ "Controls the number of messages logged to the ErrorLog\n"
+#~ "file and can be one of the following:</p>\n"
+#~ "<ul type=circle>\n"
+#~ "<li><i>debug2</i>:     Log everything.</li>\n"
+#~ "<li><i>debug</i>:     Log almost everything.</li>\n"
+#~ "<li><i>info</i>:      Log all requests and state changes.</li>\n"
+#~ "<li><i>warn</i>:      Log errors and warnings.</li>\n"
+#~ "<li><i>error</i>:     Log only errors.</li>\n"
+#~ "<li><i>none</i>:      Log nothing.</li>\n"
+#~ "</ul><p>\n"
+#~ "<i>ex</i>: info</p>\n"
+#~ msgstr ""
+#~ "<b>Úroveň zaznamenávání (LogLevel)</b>\n"
+#~ "<p>\n"
+#~ "Nastavení počtu zpráv, které mají být zaznamenány do souboru\n"
+#~ "ErrorLog. Možnosti jsou následující:</p>\n"
+#~ "<ul type=circle>\n"
+#~ "<li><i>Podrobné ladění</i>:     Zaznamenává se vše.</li>\n"
+#~ "<li><i>Ladící informace</i>:     Zaznamenává se téměř vše.</li>\n"
+#~ "<li><i>Obecné informace</i>:      Zaznamenávají se všechny požadavky a změny stavu.</li>\n"
+#~ "<li><i>Varování</i>:      Zaznamenávají se chyby a varování.</li>\n"
+#~ "<li><i>Chyby</i>:     Zaznamenávaji se pouze chyby.</li>\n"
+#~ "<li><i>Bez záznamu</i>:      Nezaznamenává se nic.</li>\n"
+#~ "</ul><p>\n"
+#~ "<i>např</i>.: Obecné informace</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Max log size (MaxLogSize)</b>\n"
+#~ "<p>\n"
+#~ "Controls the maximum size of each log file before they are\n"
+#~ "rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: 1048576</p>\n"
+#~ msgstr ""
+#~ "<b>Max. velikost souborů se záznamy (MaxLogSize)</b>\n"
+#~ "<p>\n"
+#~ "Nastavení maximální velikosti pro každý soubor se záznamy před tím,\n"
+#~ "než bude zrotován.  Výchozí nastavení je 1048576 (1MB).  Nastavení 0 zruší\n"
+#~ "rotování souborů se záznamy.</p>\n"
+#~ "<p> <i>např</i>.: 1048576</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Page log (PageLog)</b>\n"
+#~ "<p>\n"
+#~ "The page log file; if this does not start with a leading /\n"
+#~ "then it is assumed to be relative to ServerRoot.  By default set to\n"
+#~ "\"/var/log/cups/page_log\".</p>\n"
+#~ "<p>\n"
+#~ "You can also use the special name <b>syslog</b> to send the output to the\n"
+#~ "syslog file or daemon.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /var/log/cups/page_log</p>\n"
+#~ msgstr ""
+#~ "<b>Záznam o stránkách (PageLog)</b>\n"
+#~ "<p>\n"
+#~ "Soubor pro záznamy o stránkách; pokud není na začátku /,\n"
+#~ "pak se předpokládá relativní cesta ke kořenovému adresáři serveru.  \n"
+#~ "Výchozí nastavení je \"/var/log/cups/page_log\".</p>\n"
+#~ "<p>\n"
+#~ "Můžete také použít speciální název <b>syslog</b>. Pak bude výstup\n"
+#~ "předáván souboru nebo démonu syslog.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /var/log/cups/page_log</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Preserve job history (PreserveJobHistory)</b>\n"
+#~ "<p>\n"
+#~ "Whether or not to preserve the job history after a\n"
+#~ "job is completed, canceled, or stopped.  Default is Yes.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: Yes</p>\n"
+#~ msgstr ""
+#~ "<b>Uchovávat historii úloh (PreserveJobHistory)</b>\n"
+#~ "<p>\n"
+#~ "Zda se má, či nemá uchovávat historie úloh po jejich\n"
+#~ "splnění, zrušení nebo zastavení.  Výchozí hodnota je Ano</p>\n"
+#~ "<p> \n"
+#~ "<i>např</i>.: Ano</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Preserve job files (PreserveJobFiles)</b>\n"
+#~ "<p>\n"
+#~ "Whether or not to preserve the job files after a\n"
+#~ "job is completed, canceled, or stopped.  Default is No.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: No</p>\n"
+#~ msgstr ""
+#~ "<b>Uchovávat soubory úloh (PreserveJobFiles)</b>\n"
+#~ "<p>\n"
+#~ "Zda se mají, či nemají uchovávat soubory úloh po jejich\n"
+#~ "splnění, zrušení nebo zastavení.  Výchozí hodnota je Ne</p>\n"
+#~ "<p> \n"
+#~ "<i>např</i>.: Ne</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Printcap file (Printcap)</b>\n"
+#~ "<p>\n"
+#~ "The name of the printcap file.  Default is no filename.\n"
+#~ "Leave blank to disable printcap file generation.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /etc/printcap</p>\n"
+#~ msgstr ""
+#~ "<b>Soubor printcap (Printcap)</b>\n"
+#~ "<p>\n"
+#~ "Název souboru printcap. Výchozí nastavení je bez názvu souboru.\n"
+#~ "Pokud chcete zakázat používání souboru printcap, tak nechejte toto pole volné.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /etc/printcap</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Request directory (RequestRoot)</b>\n"
+#~ "<p>\n"
+#~ "The directory where request files are stored.\n"
+#~ "By default /var/spool/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /var/spool/cups</p>\n"
+#~ msgstr ""
+#~ "<b>Adresář s požadavky (RequestRoot)</b>\n"
+#~ "<p>\n"
+#~ "Adresář, kde mají být uchovávany soubory s požadavky.\n"
+#~ "Výchozí nastavení je /var/spool/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /var/spool/cups</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Remote root user (RemoteRoot)</b>\n"
+#~ "<p>\n"
+#~ "The name of the user assigned to unauthenticated accesses\n"
+#~ "from remote systems.  By default \"remroot\".</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: remroot</p>\n"
+#~ msgstr ""
+#~ "<b>Jméno vzdáleného správce (RemoteRoot)</b>\n"
+#~ "<p>\n"
+#~ "Jméno uživatele, kterému jsou přiděleny neautentikované přístupy\n"
+#~ "ze vzdálených systémů.  Výchozí nastavení je \"remroot\".</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: remroot</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Server binaries (ServerBin)</b>\n"
+#~ "<p>\n"
+#~ "The root directory for the scheduler executables.\n"
+#~ "By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /usr/lib/cups</p>\n"
+#~ msgstr ""
+#~ "<b>Binární soubory serveru (ServerBin)</b>\n"
+#~ "<p>\n"
+#~ "Kořenový adresář pro spustitelné soubory plánovače.\n"
+#~ "Výchozí nastavení je /usr/lib/cups nebo /usr/lib32/cups (IRIX 6.5).</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>: /usr/lib/cups</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Server files (ServerRoot)</b>\n"
+#~ "<p>\n"
+#~ "The root directory for the scheduler.\n"
+#~ "By default /etc/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /etc/cups</p>\n"
+#~ msgstr ""
+#~ "<b>Soubory serveru (ServerRoot)</b>\n"
+#~ "<p>\n"
+#~ "Kořenový adresář pro plánovač.\n"
+#~ "Výchozí nastavení je /etc/cups.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>: /etc/cups</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>User (User)</b>\n"
+#~ "<p>\n"
+#~ "The user the server runs under.  Normally this\n"
+#~ "must be <b>lp</b>, however you can configure things for another user\n"
+#~ "as needed.</p>\n"
+#~ "<p>\n"
+#~ "Note: the server must be run initially as root to support the\n"
+#~ "default IPP port of 631.  It changes users whenever an external\n"
+#~ "program is run...</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: lp</p>\n"
+#~ msgstr ""
+#~ "<b>Uživatel (User)</b>\n"
+#~ "<p>\n"
+#~ "Uživatel, pod kterým běží server. Obvykle to musí být\n"
+#~ "<b>lp</b>, ale v případě potřeby si můžete nastavit jiného\n"
+#~ "uživatele.</p>\n"
+#~ "<p>\n"
+#~ "Poznámka: server se musí inicializovat s uživatelem root, aby mohl\n"
+#~ "poslouchat na výchozím port IPP 631. Změní uživatele jakmile běží\n"
+#~ "externí program...</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: lp</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Group (Group)</b>\n"
+#~ "<p>\n"
+#~ "The group the server runs under.  Normally this\n"
+#~ "must be <b>sys</b>, however you can configure things for another\n"
+#~ "group as needed.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: sys</p>\n"
+#~ msgstr ""
+#~ "<b>Skupina (Group)</b>\n"
+#~ "<p>\n"
+#~ "Skupina, pod kterou běží server. Obvykle to musí být\n"
+#~ "<b>sys</b>, ale v případě potřeby si můžete nastavit jinou\n"
+#~ "skupinu.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: sys</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>RIP cache (RIPCache)</b>\n"
+#~ "<p>\n"
+#~ "The amount of memory that each RIP should use to cache\n"
+#~ "bitmaps.  The value can be any real number followed by \"k\" for\n"
+#~ "kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n"
+#~ "(1 tile = 256x256 pixels).  Defaults to \"8m\" (8 megabytes).</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: 8m</p>\n"
+#~ msgstr ""
+#~ "<b>Vyrovnávací paměť pro RIP (RIPCache)</b>\n"
+#~ "<p>\n"
+#~ "Množství paměti, které může každé RIP použít jako cache\n"
+#~ "pro bitmapy.  Hotnota může být jakékoliv reálné číslo a za ním \"k\"\n"
+#~ "pro kilobajty, \"m\" pro megabajty, \"g\" pro gigabajty nebo \"t\" pro dlaždice\n"
+#~ "(1 dlaždice = 256x256 pixelů). Výchozí nastavení je \"8m\" (8 megabajtů).</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: 8m</p>\n"
+
+#~ msgid ""
+#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n"
+#~ "<b>Temporary files (TempDir)</b>\n"
+#~ "<p>\n"
+#~ "The directory to put temporary files in. This directory must be\n"
+#~ "writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
+#~ "the value of the TMPDIR environment variable.</p>\n"
+#~ "<p>\n"
+#~ "<i>ex</i>: /var/spool/cups/tmp</p>\n"
+#~ msgstr ""
+#~ "<b>Dočasné soubory (TempDir)</b>\n"
+#~ "<p>\n"
+#~ "Adresář pro dočasné soubory. Adresář musí mít možnost\n"
+#~ "zápisu pro výše zmíněného uživatele!  Výchozí nastavení je\n"
+#~ "\"/var/spool/cups/tmp\" nebo hodnota TMPDIR pro použití systémové\n"
+#~ "proměnné.</p>\n"
+#~ "<p>\n"
+#~ "<i>např</i>.: /var/spool/cups/tmp</p>\n"