Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 447 insertions, 1442 deletions

diff --git a/tde-i18n-ss/messages/tdebase/ksysguard.po b/tde-i18n-ss/messages/tdebase/ksysguard.po
index 12305f39fb0..0b7cfde5d4d 100644
--- a/tde-i18n-ss/messages/tdebase/ksysguard.po
+++ b/tde-i18n-ss/messages/tdebase/ksysguard.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2014-11-05 10:15-0600\n"
+"POT-Creation-Date: 2018-12-06 20:16+0100\n"
 "PO-Revision-Date: 2002-11-15 02:53+0200\n"
 "Last-Translator: Adam Mathebula <adam@translate.org.za>\n"
 "Language-Team: Siswati <siswati@translate.org.za>\n"
@@ -15,1681 +15,686 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.0beta2\n"
 
-#: KSysGuardApplet.cc:209 WorkSheet.cc:331
-msgid "Select Display Type"
-msgstr ""
-
-#: KSysGuardApplet.cc:210 WorkSheet.cc:332
-msgid "&Signal Plotter"
-msgstr ""
-
-#: KSysGuardApplet.cc:211 WorkSheet.cc:333
-msgid "&Multimeter"
-msgstr ""
-
-#: KSysGuardApplet.cc:212
-msgid "&Dancing Bars"
-msgstr ""
-
-#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
-msgid ""
-"The KSysGuard applet does not support displaying of this type of sensor. Please "
-"choose another sensor."
-msgstr ""
-
-#: KSysGuardApplet.cc:318 WorkSheet.cc:94
-#, c-format
-msgid "Cannot open the file %1."
-msgstr ""
+#: SystemLoad.sgrd:5
+#, fuzzy
+msgid "CPU Load"
+msgstr "Kulayisha kwemsebentisi"
 
-#: KSysGuardApplet.cc:327 WorkSheet.cc:102
-msgid "The file %1 does not contain valid XML."
+#: SystemLoad.sgrd:10
+msgid "Load Average (1 min)"
 msgstr ""
 
-#: KSysGuardApplet.cc:334
-msgid ""
-"The file %1 does not contain a valid applet definition, which must have a "
-"document type 'KSysGuardApplet'."
-msgstr ""
+#: SystemLoad.sgrd:13
+msgid "Physical Memory"
+msgstr "Inkhumbulo yekuphatfwa"
 
-#: KSysGuardApplet.cc:476 WorkSheet.cc:225
-#, c-format
-msgid "Cannot save file %1"
-msgstr ""
+#: SystemLoad.sgrd:21
+msgid "Swap Memory"
+msgstr "Tjintja inkhumbulo"
 
-#: KSysGuardApplet.cc:488
-msgid "Drag sensors from the TDE System Guard into this cell."
-msgstr ""
+#: KSysGuardApplet.xml:5
+#, fuzzy
+msgid "CPU"
+msgstr "CPU%1"
 
-#: SensorDisplayLib/MultiMeterSettings.cc:26
-msgid "Multimeter Settings"
-msgstr ""
+#: KSysGuardApplet.xml:10
+#, fuzzy
+msgid "Mem"
+msgstr "Inkhumbulo"
 
-#: SensorDisplayLib/ProcessController.cc:54
-msgid "Name"
-msgstr "Ligama"
+#~ msgid "Name"
+#~ msgstr "Ligama"
 
-#: SensorDisplayLib/ProcessController.cc:55
-msgid "PID"
-msgstr "PID"
+#~ msgid "PID"
+#~ msgstr "PID"
 
-#: SensorDisplayLib/ProcessController.cc:56
-msgid "PPID"
-msgstr "PPID"
+#~ msgid "PPID"
+#~ msgstr "PPID"
 
-#: SensorDisplayLib/ProcessController.cc:57
-msgid "UID"
-msgstr "UID"
+#~ msgid "UID"
+#~ msgstr "UID"
 
-#: SensorDisplayLib/ProcessController.cc:58
-msgid "GID"
-msgstr "GID"
+#~ msgid "GID"
+#~ msgstr "GID"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:170
-#: SensorDisplayLib/FancyPlotterSettings.cc:234
-#: SensorDisplayLib/ProcessController.cc:59
-msgid "Status"
-msgstr "Simo"
+#~ msgid "Status"
+#~ msgstr "Simo"
 
-#: SensorDisplayLib/ProcessController.cc:60
-#, c-format
-msgid "User%"
-msgstr "Umsebentisi%"
+#~ msgid "User%"
+#~ msgstr "Umsebentisi%"
 
-#: SensorDisplayLib/ProcessController.cc:61
-#, c-format
-msgid "System%"
-msgstr "Umshini%"
+#~ msgid "System%"
+#~ msgstr "Umshini%"
 
-#: SensorDisplayLib/ProcessController.cc:62
-#: SensorDisplayLib/ProcessList.cc:783
-msgid "Nice"
-msgstr "Mnandzi"
+#~ msgid "Nice"
+#~ msgstr "Mnandzi"
 
-#: SensorDisplayLib/ProcessController.cc:63
-msgid "VmSize"
-msgstr "SVmSize"
+#~ msgid "VmSize"
+#~ msgstr "SVmSize"
 
-#: SensorDisplayLib/ProcessController.cc:64
-msgid "VmRss"
-msgstr "VmRss"
+#~ msgid "VmRss"
+#~ msgstr "VmRss"
 
-#: SensorDisplayLib/ProcessController.cc:65
-msgid "Login"
-msgstr "Ngena"
+#~ msgid "Login"
+#~ msgstr "Ngena"
 
-#: SensorDisplayLib/ProcessController.cc:66
-msgid "Command"
-msgstr "Umyalo"
+#~ msgid "Command"
+#~ msgstr "Umyalo"
 
-#: SensorDisplayLib/ProcessController.cc:97
-msgid "All Processes"
-msgstr "Tonkhe tinchubo"
+#~ msgid "All Processes"
+#~ msgstr "Tonkhe tinchubo"
 
-#: SensorDisplayLib/ProcessController.cc:98
-msgid "System Processes"
-msgstr "Tinchubo temshini"
+#~ msgid "System Processes"
+#~ msgstr "Tinchubo temshini"
 
-#: SensorDisplayLib/ProcessController.cc:99
-msgid "User Processes"
-msgstr "Tinchubo temsebentisi"
+#~ msgid "User Processes"
+#~ msgstr "Tinchubo temsebentisi"
 
-#: SensorDisplayLib/ProcessController.cc:100
-msgid "Own Processes"
-msgstr "Tinchubo takho"
+#~ msgid "Own Processes"
+#~ msgstr "Tinchubo takho"
 
-#: SensorDisplayLib/ProcessController.cc:103
-msgid "&Tree"
-msgstr "&Sihlahla"
+#~ msgid "&Tree"
+#~ msgstr "&Sihlahla"
 
-#: SensorDisplayLib/ProcessController.cc:116
-msgid "&Refresh"
-msgstr "&Phumuta"
+#~ msgid "&Refresh"
+#~ msgstr "&Phumuta"
 
-#: SensorDisplayLib/ProcessController.cc:123
-msgid "&Kill"
-msgstr "&Bulala"
+#~ msgid "&Kill"
+#~ msgstr "&Bulala"
 
-#: SensorDisplayLib/ProcessController.cc:206
-msgid "%1: Running Processes"
-msgstr "%1: Kusebentisa tinchubo"
+#~ msgid "%1: Running Processes"
+#~ msgstr "%1: Kusebentisa tinchubo"
 
-#: SensorDisplayLib/ProcessController.cc:239
 #, fuzzy
-msgid "You need to select a process first."
-msgstr "Udzinga kukhetsa inchubo kucala!"
+#~ msgid "You need to select a process first."
+#~ msgstr "Udzinga kukhetsa inchubo kucala!"
 
-#: SensorDisplayLib/ProcessController.cc:245
-#, c-format
-msgid ""
-"_n: Do you want to kill the selected process?\n"
-"Do you want to kill the %n selected processes?"
-msgstr ""
-"Ingabe ufuna kubulala inchubo lekhetsiwe?\n"
-"Ingabe ufuna kubulala %n inchubo lekhetsiwe?"
+#~ msgid ""
+#~ "_n: Do you want to kill the selected process?\n"
+#~ "Do you want to kill the %n selected processes?"
+#~ msgstr ""
+#~ "Ingabe ufuna kubulala inchubo lekhetsiwe?\n"
+#~ "Ingabe ufuna kubulala %n inchubo lekhetsiwe?"
 
-#: SensorDisplayLib/ProcessController.cc:248
-msgid "Kill Process"
-msgstr "Bulala inchubo"
+#~ msgid "Kill Process"
+#~ msgstr "Bulala inchubo"
 
-#: SensorDisplayLib/ProcessController.cc:252
 #, fuzzy
-msgid "Kill"
-msgstr "&Bulala"
-
-#: SensorDisplayLib/ProcessController.cc:258
-msgid "Do not ask again"
-msgstr ""
+#~ msgid "Kill"
+#~ msgstr "&Bulala"
 
-#: SensorDisplayLib/ProcessController.cc:344
-#, fuzzy, c-format
-msgid "Error while attempting to kill process %1."
-msgstr "Liphutsa kusazanywa kubulala inchubo %1!"
-
-#: SensorDisplayLib/ProcessController.cc:349
-#, fuzzy, c-format
-msgid "Insufficient permissions to kill process %1."
-msgstr "Invumo lengakaneli yekubulala inchubo %1!"
-
-#: SensorDisplayLib/ProcessController.cc:354
-#: SensorDisplayLib/ProcessController.cc:389
 #, fuzzy
-msgid "Process %1 has already disappeared."
-msgstr "Inchubo %1 yinyamalele kakadze!"
+#~ msgid "Error while attempting to kill process %1."
+#~ msgstr "Liphutsa kusazanywa kubulala inchubo %1!"
 
-#: SensorDisplayLib/ProcessController.cc:358
 #, fuzzy
-msgid "Invalid Signal."
-msgstr "Luphawu lolungekho emtsetfweni!"
-
-#: SensorDisplayLib/ProcessController.cc:379
-#, fuzzy, c-format
-msgid "Error while attempting to renice process %1."
-msgstr "Liphutsa kusazanywa kuhlanganisa liphutsa %1!"
+#~ msgid "Insufficient permissions to kill process %1."
+#~ msgstr "Invumo lengakaneli yekubulala inchubo %1!"
 
-#: SensorDisplayLib/ProcessController.cc:384
-#, fuzzy, c-format
-msgid "Insufficient permissions to renice process %1."
-msgstr "Invumo lengakaneli yekuhlanganisa inchubo %1!"
-
-#: SensorDisplayLib/ProcessController.cc:393
 #, fuzzy
-msgid "Invalid argument."
-msgstr "Imphikiswano lengekho emtsetfweni!"
+#~ msgid "Process %1 has already disappeared."
+#~ msgstr "Inchubo %1 yinyamalele kakadze!"
 
-#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
 #, fuzzy
-msgid "It is impossible to connect to '%1'."
-msgstr "Akwenteki kuchumanisa ne '%1'!"
-
-#: SensorDisplayLib/SensorDisplay.cc:162
-msgid "Launch &System Guard"
-msgstr ""
-
-#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
-msgid "&Properties"
-msgstr ""
-
-#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
-msgid "&Remove Display"
-msgstr "&Susa umboniso"
+#~ msgid "Invalid Signal."
+#~ msgstr "Luphawu lolungekho emtsetfweni!"
 
-#: SensorDisplayLib/SensorDisplay.cc:169
-msgid "&Setup Update Interval..."
-msgstr ""
+#, fuzzy
+#~ msgid "Error while attempting to renice process %1."
+#~ msgstr "Liphutsa kusazanywa kuhlanganisa liphutsa %1!"
 
-#: SensorDisplayLib/SensorDisplay.cc:171
-msgid "&Continue Update"
-msgstr "&Chubekisa kulungisa"
+#, fuzzy
+#~ msgid "Insufficient permissions to renice process %1."
+#~ msgstr "Invumo lengakaneli yekuhlanganisa inchubo %1!"
 
-#: SensorDisplayLib/SensorDisplay.cc:173
-msgid "P&ause Update"
-msgstr "Y&imisa kwesikhashne kulungisa"
+#, fuzzy
+#~ msgid "Invalid argument."
+#~ msgstr "Imphikiswano lengekho emtsetfweni!"
 
-#: SensorDisplayLib/SensorDisplay.cc:240
-msgid ""
-"<qt>"
-"<p>This is a sensor display. To customize a sensor display click and hold the "
-"right mouse button on either the frame or the display box and select the <i>"
-"Properties</i> entry from the popup menu. Select <i>Remove</i> "
-"to delete the display from the worksheet.</p>%1</qt>"
-msgstr ""
+#, fuzzy
+#~ msgid "It is impossible to connect to '%1'."
+#~ msgstr "Akwenteki kuchumanisa ne '%1'!"
 
-#: SensorDisplayLib/DummyDisplay.cc:33
-msgid "Drop Sensor Here"
-msgstr "Lahla i-sensor lapha"
+#~ msgid "&Remove Display"
+#~ msgstr "&Susa umboniso"
 
-#: SensorDisplayLib/DummyDisplay.cc:38
-msgid ""
-"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
-"and drop it here. A sensor display will appear that allows you to monitor the "
-"values of the sensor over time."
-msgstr ""
+#~ msgid "&Continue Update"
+#~ msgstr "&Chubekisa kulungisa"
 
-#: SensorDisplayLib/SensorLoggerSettings.cc:26
-msgid "Sensor Logger Settings"
-msgstr ""
+#~ msgid "P&ause Update"
+#~ msgstr "Y&imisa kwesikhashne kulungisa"
 
-#: SensorDisplayLib/SensorLogger.cc:136
-msgid "Logging"
-msgstr "Kungena "
+#~ msgid "Drop Sensor Here"
+#~ msgstr "Lahla i-sensor lapha"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
-#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:129
-#, no-c-format
-msgid "Timer Interval"
-msgstr ""
+#~ msgid "Logging"
+#~ msgstr "Kungena "
 
-#: SensorDisplayLib/SensorLogger.cc:138
 #, fuzzy
-msgid "Sensor Name"
-msgstr "Ligama le-sensor"
+#~ msgid "Sensor Name"
+#~ msgstr "Ligama le-sensor"
 
-#: SensorDisplayLib/SensorLogger.cc:139
 #, fuzzy
-msgid "Host Name"
-msgstr "Ligama lesamukeli"
+#~ msgid "Host Name"
+#~ msgstr "Ligama lesamukeli"
 
-#: SensorDisplayLib/SensorLogger.cc:140
 #, fuzzy
-msgid "Log File"
-msgstr "Ngena"
+#~ msgid "Log File"
+#~ msgstr "Ngena"
 
-#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
-msgid "Sensor Logger"
-msgstr ""
+#~ msgid "&Remove Sensor"
+#~ msgstr "&Susa i-sensor"
 
-#: SensorDisplayLib/SensorLogger.cc:383
-msgid "&Remove Sensor"
-msgstr "&Susa i-sensor"
-
-#: SensorDisplayLib/SensorLogger.cc:384
 #, fuzzy
-msgid "&Edit Sensor..."
-msgstr "&Hlela i-sensor"
+#~ msgid "&Edit Sensor..."
+#~ msgstr "&Hlela i-sensor"
 
-#: SensorDisplayLib/SensorLogger.cc:396
-msgid "St&op Logging"
-msgstr "Yi&ma kungena"
+#~ msgid "St&op Logging"
+#~ msgstr "Yi&ma kungena"
 
-#: SensorDisplayLib/SensorLogger.cc:398
-msgid "S&tart Logging"
-msgstr "C&ala kungena"
+#~ msgid "S&tart Logging"
+#~ msgstr "C&ala kungena"
 
-#: SensorDisplayLib/ProcessList.cc:110
-msgid ""
-"_: process status\n"
-"running"
-msgstr "kusebenta"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "running"
+#~ msgstr "kusebenta"
 
-#: SensorDisplayLib/ProcessList.cc:112
-msgid ""
-"_: process status\n"
-"sleeping"
-msgstr "kulala"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "sleeping"
+#~ msgstr "kulala"
 
-#: SensorDisplayLib/ProcessList.cc:114
-msgid ""
-"_: process status\n"
-"disk sleep"
-msgstr "kulala kwe diski"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "disk sleep"
+#~ msgstr "kulala kwe diski"
 
-#: SensorDisplayLib/ProcessList.cc:115
-msgid ""
-"_: process status\n"
-"zombie"
-msgstr "zombie"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "zombie"
+#~ msgstr "zombie"
 
-#: SensorDisplayLib/ProcessList.cc:117
-msgid ""
-"_: process status\n"
-"stopped"
-msgstr "yimisiwe"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "stopped"
+#~ msgstr "yimisiwe"
 
-#: SensorDisplayLib/ProcessList.cc:118
-msgid ""
-"_: process status\n"
-"paging"
-msgstr "kuvula"
-
-#: SensorDisplayLib/ProcessList.cc:119
-msgid ""
-"_: process status\n"
-"idle"
-msgstr "ngasebenti"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "paging"
+#~ msgstr "kuvula"
 
-#: SensorDisplayLib/ProcessList.cc:259
-msgid "Remove Column"
-msgstr "Susa likholomu"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "idle"
+#~ msgstr "ngasebenti"
 
-#: SensorDisplayLib/ProcessList.cc:260
-msgid "Add Column"
-msgstr "Ngeta likholomu"
+#~ msgid "Remove Column"
+#~ msgstr "Susa likholomu"
 
-#: SensorDisplayLib/ProcessList.cc:261
-msgid "Help on Column"
-msgstr "Sita kulikholomu"
+#~ msgid "Add Column"
+#~ msgstr "Ngeta likholomu"
 
-#: SensorDisplayLib/ProcessList.cc:788
-msgid "Hide Column"
-msgstr "Fihla likholomu"
+#~ msgid "Help on Column"
+#~ msgstr "Sita kulikholomu"
 
-#: SensorDisplayLib/ProcessList.cc:794
-msgid "Show Column"
-msgstr "Khombisa lokholomu"
+#~ msgid "Hide Column"
+#~ msgstr "Fihla likholomu"
 
-#: SensorDisplayLib/ProcessList.cc:798
-msgid "Select All Processes"
-msgstr "Khetsa tonkhe tinchubo"
+#~ msgid "Show Column"
+#~ msgstr "Khombisa lokholomu"
 
-#: SensorDisplayLib/ProcessList.cc:799
-msgid "Unselect All Processes"
-msgstr "Ngafungi tonkhe tinchubo"
+#~ msgid "Select All Processes"
+#~ msgstr "Khetsa tonkhe tinchubo"
 
-#: SensorDisplayLib/ProcessList.cc:805
-msgid "Select All Child Processes"
-msgstr "Khetsa tonkhe tinchubo letincane"
+#~ msgid "Unselect All Processes"
+#~ msgstr "Ngafungi tonkhe tinchubo"
 
-#: SensorDisplayLib/ProcessList.cc:806
-msgid "Unselect All Child Processes"
-msgstr "Ngafungi tonkhe tinchubo letincane"
+#~ msgid "Select All Child Processes"
+#~ msgstr "Khetsa tonkhe tinchubo letincane"
 
-#: SensorDisplayLib/ProcessList.cc:808
-msgid "SIGABRT"
-msgstr "SIGABRT"
+#~ msgid "Unselect All Child Processes"
+#~ msgstr "Ngafungi tonkhe tinchubo letincane"
 
-#: SensorDisplayLib/ProcessList.cc:809
-msgid "SIGALRM"
-msgstr "SIGALRM"
+#~ msgid "SIGABRT"
+#~ msgstr "SIGABRT"
 
-#: SensorDisplayLib/ProcessList.cc:810
-msgid "SIGCHLD"
-msgstr "SIGCHLD"
+#~ msgid "SIGALRM"
+#~ msgstr "SIGALRM"
 
-#: SensorDisplayLib/ProcessList.cc:811
-msgid "SIGCONT"
-msgstr "SIGCONT"
+#~ msgid "SIGCHLD"
+#~ msgstr "SIGCHLD"
 
-#: SensorDisplayLib/ProcessList.cc:812
-msgid "SIGFPE"
-msgstr "SIGFPE"
+#~ msgid "SIGCONT"
+#~ msgstr "SIGCONT"
 
-#: SensorDisplayLib/ProcessList.cc:813
-msgid "SIGHUP"
-msgstr "SIGHUP"
+#~ msgid "SIGFPE"
+#~ msgstr "SIGFPE"
 
-#: SensorDisplayLib/ProcessList.cc:814
-msgid "SIGILL"
-msgstr "SIGILL"
+#~ msgid "SIGHUP"
+#~ msgstr "SIGHUP"
 
-#: SensorDisplayLib/ProcessList.cc:815
-msgid "SIGINT"
-msgstr "SIGINT"
+#~ msgid "SIGILL"
+#~ msgstr "SIGILL"
 
-#: SensorDisplayLib/ProcessList.cc:816
-msgid "SIGKILL"
-msgstr "SIGKILL"
+#~ msgid "SIGINT"
+#~ msgstr "SIGINT"
 
-#: SensorDisplayLib/ProcessList.cc:817
-msgid "SIGPIPE"
-msgstr "SIGPIPE"
+#~ msgid "SIGKILL"
+#~ msgstr "SIGKILL"
 
-#: SensorDisplayLib/ProcessList.cc:818
-msgid "SIGQUIT"
-msgstr "SIGQUIT"
+#~ msgid "SIGPIPE"
+#~ msgstr "SIGPIPE"
 
-#: SensorDisplayLib/ProcessList.cc:819
-msgid "SIGSEGV"
-msgstr "SIGSEGV"
+#~ msgid "SIGQUIT"
+#~ msgstr "SIGQUIT"
 
-#: SensorDisplayLib/ProcessList.cc:820
-msgid "SIGSTOP"
-msgstr "SIGSTOP"
+#~ msgid "SIGSEGV"
+#~ msgstr "SIGSEGV"
 
-#: SensorDisplayLib/ProcessList.cc:821
-msgid "SIGTERM"
-msgstr "SIGTERM"
+#~ msgid "SIGSTOP"
+#~ msgstr "SIGSTOP"
 
-#: SensorDisplayLib/ProcessList.cc:822
-msgid "SIGTSTP"
-msgstr "SIGTSTP"
+#~ msgid "SIGTERM"
+#~ msgstr "SIGTERM"
 
-#: SensorDisplayLib/ProcessList.cc:823
-msgid "SIGTTIN"
-msgstr "SIGTTIN"
+#~ msgid "SIGTSTP"
+#~ msgstr "SIGTSTP"
 
-#: SensorDisplayLib/ProcessList.cc:824
-msgid "SIGTTOU"
-msgstr "SIGTTOU"
+#~ msgid "SIGTTIN"
+#~ msgstr "SIGTTIN"
 
-#: SensorDisplayLib/ProcessList.cc:825
-msgid "SIGUSR1"
-msgstr "SIGUSR1"
+#~ msgid "SIGTTOU"
+#~ msgstr "SIGTTOU"
 
-#: SensorDisplayLib/ProcessList.cc:826
-msgid "SIGUSR2"
-msgstr "SIGUSR2"
+#~ msgid "SIGUSR1"
+#~ msgstr "SIGUSR1"
 
-#: SensorDisplayLib/ProcessList.cc:829
-msgid "Send Signal"
-msgstr "Tfumela luphawu"
+#~ msgid "SIGUSR2"
+#~ msgstr "SIGUSR2"
 
-#: SensorDisplayLib/ProcessList.cc:837
-msgid "Renice Process..."
-msgstr ""
-
-#: SensorDisplayLib/ProcessList.cc:885
-msgid ""
-"_n: Do you really want to send signal %1 to the selected process?\n"
-"Do you really want to send signal %1 to the %n selected processes?"
-msgstr ""
+#~ msgid "Send Signal"
+#~ msgstr "Tfumela luphawu"
 
-#: SensorDisplayLib/ProcessList.cc:889
 #, fuzzy
-msgid "Send"
-msgstr "Sensor"
-
-#: SensorDisplayLib/ReniceDlg.cc:32
-msgid "Renice Process"
-msgstr ""
-
-#: SensorDisplayLib/ReniceDlg.cc:40
-msgid ""
-"You are about to change the scheduling priority of\n"
-"process %1. Be aware that only the Superuser (root)\n"
-"can decrease the nice level of a process. The lower\n"
-"the number is the higher the priority.\n"
-"\n"
-"Please enter the desired nice level:"
-msgstr ""
+#~ msgid "Send"
+#~ msgstr "Sensor"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
-#: SensorDisplayLib/LogFile.cc:88 rc.cpp:27
-#, no-c-format
-msgid "Foreground color:"
-msgstr "Umbala welingaphambili:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 102
-#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
-#: ksgrd/StyleSettings.cc:68 rc.cpp:30 rc.cpp:69 rc.cpp:123 rc.cpp:171
-#, no-c-format
-msgid "Background color:"
-msgstr "Umbala welingemuva:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:43
-msgid "Edit BarGraph Preferences"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:47
-msgid "Range"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 46
-#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
-#: rc.cpp:21 rc.cpp:60 rc.cpp:75 rc.cpp:159
-#, no-c-format
-msgid "Title"
-msgstr "Sihloko"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
-#: SensorDisplayLib/DancingBarsSettings.cc:54
-#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:78
-#, no-c-format
-msgid "Enter the title of the display here."
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:59
-msgid "Display Range"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:63
-#: SensorDisplayLib/FancyPlotterSettings.cc:89
-msgid "Minimum value:"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:67
-#: SensorDisplayLib/FancyPlotterSettings.cc:95
-msgid ""
-"Enter the minimum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:71
-#: SensorDisplayLib/FancyPlotterSettings.cc:99
-msgid "Maximum value:"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:75
-#: SensorDisplayLib/FancyPlotterSettings.cc:105
-msgid ""
-"Enter the maximum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
-#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:87
-#, no-c-format
-msgid "Alarms"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 138
-#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:102 rc.cpp:135
-#, no-c-format
-msgid "Alarm for Minimum Value"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:91
-#: SensorDisplayLib/DancingBarsSettings.cc:109
-msgid "Enable alarm"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 152
-#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:108 rc.cpp:141
-#, no-c-format
-msgid "Enable the minimum value alarm."
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 180
-#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:111 rc.cpp:144
-#, no-c-format
-msgid "Lower limit:"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 72
-#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:90 rc.cpp:147
-#, no-c-format
-msgid "Alarm for Maximum Value"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 86
-#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:96 rc.cpp:153
-#, no-c-format
-msgid "Enable the maximum value alarm."
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 114
-#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:99 rc.cpp:156
-#, no-c-format
-msgid "Upper limit:"
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:126
-msgid "Look"
-msgstr "Buka"
+#~ msgid "Foreground color:"
+#~ msgstr "Umbala welingaphambili:"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:129
-msgid "Normal bar color:"
-msgstr "Umbala we bar lojwayelekile:"
+#~ msgid "Background color:"
+#~ msgstr "Umbala welingemuva:"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:136
-msgid "Out-of-range color:"
-msgstr ""
+#~ msgid "Title"
+#~ msgstr "Sihloko"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:150
-#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
-msgid "Font size:"
-msgstr ""
+#~ msgid "Look"
+#~ msgstr "Buka"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:154
-msgid ""
-"This determines the size of the font used to print a label underneath the bars. "
-"Bars are automatically suppressed if text becomes too large, so it is advisable "
-"to use a small font size here."
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:161
-#: SensorDisplayLib/FancyPlotterSettings.cc:224
-msgid "Sensors"
-msgstr "Sensors"
+#~ msgid "Normal bar color:"
+#~ msgstr "Umbala we bar lojwayelekile:"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:166
-#: SensorDisplayLib/FancyPlotterSettings.cc:231
-msgid "Host"
-msgstr "Samukeli"
+#~ msgid "Sensors"
+#~ msgstr "Sensors"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:167
-#: SensorDisplayLib/FancyPlotterSettings.cc:232
-msgid "Sensor"
-msgstr "Sensor"
+#~ msgid "Host"
+#~ msgstr "Samukeli"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:168
-msgid "Label"
-msgstr "Ilebuli"
+#~ msgid "Sensor"
+#~ msgstr "Sensor"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:169
-#: SensorDisplayLib/FancyPlotterSettings.cc:233
-msgid "Unit"
-msgstr ""
+#~ msgid "Label"
+#~ msgstr "Ilebuli"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:174
 #, fuzzy
-msgid "Edit..."
-msgstr "&Hlela"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:176
-msgid "Push this button to configure the label."
-msgstr "Shova lenkhinobho kuze uhlele ilebulu."
+#~ msgid "Edit..."
+#~ msgstr "&Hlela"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:181
-#: SensorDisplayLib/FancyPlotterSettings.cc:249
-msgid "Push this button to delete the sensor."
-msgstr ""
-
-#: SensorDisplayLib/DancingBarsSettings.cc:356
-msgid "Label of Bar Graph"
-msgstr "Ilebuli yemdvwebo we-bar"
+#~ msgid "Push this button to configure the label."
+#~ msgstr "Shova lenkhinobho kuze uhlele ilebulu."
 
-#: SensorDisplayLib/DancingBarsSettings.cc:357
-msgid "Enter new label:"
-msgstr "Faka ilebuli lensha:"
+#~ msgid "Label of Bar Graph"
+#~ msgstr "Ilebuli yemdvwebo we-bar"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:47
-msgid "Signal Plotter Settings"
-msgstr ""
+#~ msgid "Enter new label:"
+#~ msgstr "Faka ilebuli lensha:"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:57
-msgid "Style"
-msgstr "Sitayela"
+#~ msgid "Style"
+#~ msgstr "Sitayela"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:60
 #, fuzzy
-msgid "Title:"
-msgstr "Sihloko"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:69
-msgid "Graph Drawing Style"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:71
-msgid "Basic polygons"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:73
-msgid "Original - single line per data point"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:78
-msgid "Scales"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:81
-msgid "Vertical Scale"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:85
-msgid "Automatic range detection"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:86
-msgid ""
-"Check this box if you want the display range to adapt dynamically to the "
-"currently displayed values; if you do not check this, you have to specify the "
-"range you want in the fields below."
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:111
-msgid "Horizontal Scale"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:120
-msgid "pixel(s) per time period"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:126
-msgid "Grid"
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:129
-msgid "Lines"
-msgstr "ImigcaS"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:133
-msgid "Vertical lines"
-msgstr "Imigca leyimile"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:134
-msgid "Check this to activate the vertical lines if display is large enough."
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:137
-msgid "Distance:"
-msgstr "Libanga:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:143
-msgid "Enter the distance between two vertical lines here."
-msgstr ""
+#~ msgid "Title:"
+#~ msgstr "Sihloko"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:147
-msgid "Vertical lines scroll"
-msgstr "Kugicita imigca leyimile"
+#~ msgid "Lines"
+#~ msgstr "ImigcaS"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:150
-msgid "Horizontal lines"
-msgstr "Imigca levundlile"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:151
-msgid "Check this to enable horizontal lines if display is large enough."
-msgstr ""
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:154
-msgid "Count:"
-msgstr "Bala:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:160
-msgid "Enter the number of horizontal lines here."
-msgstr ""
+#~ msgid "Vertical lines"
+#~ msgstr "Imigca leyimile"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
-#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:18
-#, no-c-format
-msgid "Text"
-msgstr "Umbhalo"
+#~ msgid "Distance:"
+#~ msgstr "Libanga:"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:172
-msgid "Labels"
-msgstr "Emalebuli"
+#~ msgid "Vertical lines scroll"
+#~ msgstr "Kugicita imigca leyimile"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:173
-msgid ""
-"Check this box if horizontal lines should be decorated with the values they "
-"mark."
-msgstr ""
+#~ msgid "Horizontal lines"
+#~ msgstr "Imigca levundlile"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:185
-msgid "Top bar"
-msgstr "I bar lesenhla"
+#~ msgid "Count:"
+#~ msgstr "Bala:"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:186
-msgid ""
-"Check this to active the display title bar. This is probably only useful for "
-"applet displays. The bar is only visible if the display is large enough."
-msgstr ""
+#~ msgid "Text"
+#~ msgstr "Umbhalo"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 64
-#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:24 rc.cpp:63 rc.cpp:114
-#: rc.cpp:162
-#, no-c-format
-msgid "Colors"
-msgstr "Imibala"
+#~ msgid "Labels"
+#~ msgstr "Emalebuli"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:196
-#, fuzzy
-msgid "Vertical lines:"
-msgstr "Imigca leyimile"
+#~ msgid "Top bar"
+#~ msgstr "I bar lesenhla"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:203
-#, fuzzy
-msgid "Horizontal lines:"
-msgstr "Imigca levundlile"
+#~ msgid "Colors"
+#~ msgstr "Imibala"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:210
 #, fuzzy
-msgid "Background:"
-msgstr "Lingemuva"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:242
-#, fuzzy
-msgid "Set Color..."
-msgstr "&Hlela umbala..."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:244
-msgid "Push this button to configure the color of the sensor in the diagram."
-msgstr ""
+#~ msgid "Vertical lines:"
+#~ msgstr "Imigca leyimile"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:252
 #, fuzzy
-msgid "Move Up"
-msgstr "Khweshela &etulu"
+#~ msgid "Horizontal lines:"
+#~ msgstr "Imigca levundlile"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:256
 #, fuzzy
-msgid "Move Down"
-msgstr "Khweshela &phansi"
-
-#: SensorDisplayLib/ListViewSettings.cc:26
-msgid "List View Settings"
-msgstr ""
-
-#: KSGAppletSettings.cc:34
-msgid "System Guard Settings"
-msgstr ""
-
-#: KSGAppletSettings.cc:42
-msgid "Number of displays:"
-msgstr ""
-
-#: KSGAppletSettings.cc:50
-msgid "Size ratio:"
-msgstr ""
-
-#: KSGAppletSettings.cc:54
-#, c-format
-msgid "%"
-msgstr "%"
-
-#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
-msgid "Update interval:"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
-#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
-#: rc.cpp:132
-#, no-c-format
-msgid " sec"
-msgstr " sec"
-
-#: WorkSheet.cc:109
-msgid ""
-"The file %1 does not contain a valid worksheet definition, which must have a "
-"document type 'KSysGuardWorkSheet'."
-msgstr ""
-
-#: WorkSheet.cc:125
-msgid "The file %1 has an invalid worksheet size."
-msgstr ""
-
-#: WorkSheet.cc:273
-msgid "The clipboard does not contain a valid display description."
-msgstr ""
-
-#: WorkSheet.cc:334
-msgid "&BarGraph"
-msgstr ""
-
-#: WorkSheet.cc:335
-msgid "S&ensorLogger"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
-#: rc.cpp:15
-#, no-c-format
-msgid "Log File Settings"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
-#: rc.cpp:36
-#, no-c-format
-msgid "Select Font..."
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
-#: rc.cpp:39
-#, no-c-format
-msgid "Filter"
-msgstr "Sisefo"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
-#: rc.cpp:42
-#, no-c-format
-msgid "&Add"
-msgstr "&Ngeta"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
-#: rc.cpp:48
-#, no-c-format
-msgid "&Change"
-msgstr "&Tjintja"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 91
-#: rc.cpp:66 rc.cpp:165
-#, no-c-format
-msgid "Text color:"
-msgstr "Umbala wembhalo:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
-#: ksgrd/StyleSettings.cc:61 rc.cpp:72
-#, no-c-format
-msgid "Alarm color:"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
-#: rc.cpp:81
-#, no-c-format
-msgid "&Show unit"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
-#: rc.cpp:84
-#, no-c-format
-msgid "Enable this to append the unit to the title of the display."
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 83
-#: rc.cpp:93 rc.cpp:150
-#, no-c-format
-msgid "E&nable alarm"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 149
-#: rc.cpp:105 rc.cpp:138
-#, no-c-format
-msgid "&Enable alarm"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
-#: rc.cpp:117
-#, no-c-format
-msgid "Normal digit color:"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
-#: rc.cpp:120
-#, no-c-format
-msgid "Alarm digit color:"
-msgstr ""
-
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
-#: rc.cpp:168
-#, no-c-format
-msgid "Grid color:"
-msgstr ""
+#~ msgid "Background:"
+#~ msgstr "Lingemuva"
 
-#. i18n: file SystemLoad.sgrd line 5
-#: ksgrd/SensorManager.cc:50 rc.cpp:173
 #, fuzzy
-msgid "CPU Load"
-msgstr "Kulayisha kwemsebentisi"
-
-#. i18n: file SystemLoad.sgrd line 10
-#: ksgrd/SensorManager.cc:103 rc.cpp:175
-msgid "Load Average (1 min)"
-msgstr ""
-
-#. i18n: file SystemLoad.sgrd line 13
-#: ksgrd/SensorManager.cc:56 rc.cpp:177
-msgid "Physical Memory"
-msgstr "Inkhumbulo yekuphatfwa"
-
-#. i18n: file SystemLoad.sgrd line 21
-#: ksgrd/SensorManager.cc:57 rc.cpp:179
-msgid "Swap Memory"
-msgstr "Tjintja inkhumbulo"
+#~ msgid "Set Color..."
+#~ msgstr "&Hlela umbala..."
 
-#. i18n: file KSysGuardApplet.xml line 5
-#: rc.cpp:181
 #, fuzzy
-msgid "CPU"
-msgstr "CPU%1"
+#~ msgid "Move Up"
+#~ msgstr "Khweshela &etulu"
 
-#. i18n: file KSysGuardApplet.xml line 10
-#: rc.cpp:183
 #, fuzzy
-msgid "Mem"
-msgstr "Inkhumbulo"
+#~ msgid "Move Down"
+#~ msgstr "Khweshela &phansi"
 
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Adam Mathebula"
+#~ msgid "%"
+#~ msgstr "%"
 
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "adam@translate.org.za"
+#~ msgid " sec"
+#~ msgstr " sec"
 
-#: ksgrd/SensorManager.cc:51
-msgid "Idle Load"
-msgstr "Libatis akulayisha"
+#~ msgid "Filter"
+#~ msgstr "Sisefo"
 
-#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
-#: ksysguard.cc:171
-msgid "System Load"
-msgstr "Kulayisha kwemshini"
+#~ msgid "&Add"
+#~ msgstr "&Ngeta"
 
-#: ksgrd/SensorManager.cc:53
-msgid "Nice Load"
-msgstr "Lulayisha lokumnadzi"
+#~ msgid "&Change"
+#~ msgstr "&Tjintja"
 
-#: ksgrd/SensorManager.cc:54
-msgid "User Load"
-msgstr "Kulayisha kwemsebentisi"
+#~ msgid "Text color:"
+#~ msgstr "Umbala wembhalo:"
 
-#: ksgrd/SensorManager.cc:55
-msgid "Memory"
-msgstr "Inkhumbulo"
+#~ msgid ""
+#~ "_: NAME OF TRANSLATORS\n"
+#~ "Your names"
+#~ msgstr "Adam Mathebula"
 
-#: ksgrd/SensorManager.cc:58
-msgid "Cached Memory"
-msgstr ""
+#~ msgid ""
+#~ "_: EMAIL OF TRANSLATORS\n"
+#~ "Your emails"
+#~ msgstr "adam@translate.org.za"
 
-#: ksgrd/SensorManager.cc:59
-msgid "Buffered Memory"
-msgstr ""
+#~ msgid "Idle Load"
+#~ msgstr "Libatis akulayisha"
 
-#: ksgrd/SensorManager.cc:60
-msgid "Used Memory"
-msgstr "Inkhumbulo lesetjentisiwe"
+#~ msgid "System Load"
+#~ msgstr "Kulayisha kwemshini"
 
-#: ksgrd/SensorManager.cc:61
-msgid "Application Memory"
-msgstr "Sicelo senkhumbulo"
+#~ msgid "Nice Load"
+#~ msgstr "Lulayisha lokumnadzi"
 
-#: ksgrd/SensorManager.cc:62
-msgid "Free Memory"
-msgstr "Khulula inkhumbulo"
+#~ msgid "User Load"
+#~ msgstr "Kulayisha kwemsebentisi"
 
-#: ksgrd/SensorManager.cc:63
-msgid "Process Count"
-msgstr "Kubala inchubo"
+#~ msgid "Memory"
+#~ msgstr "Inkhumbulo"
 
-#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
-msgid "Process Controller"
-msgstr "Silawuli senchubo"
+#~ msgid "Used Memory"
+#~ msgstr "Inkhumbulo lesetjentisiwe"
 
-#: ksgrd/SensorManager.cc:65
-msgid "Disk Throughput"
-msgstr ""
+#~ msgid "Application Memory"
+#~ msgstr "Sicelo senkhumbulo"
 
-#: ksgrd/SensorManager.cc:66
-msgid ""
-"_: CPU Load\n"
-"Load"
-msgstr "Layisha"
+#~ msgid "Free Memory"
+#~ msgstr "Khulula inkhumbulo"
 
-#: ksgrd/SensorManager.cc:67
-msgid "Total Accesses"
-msgstr "Sibalo sekutfolakala "
+#~ msgid "Process Count"
+#~ msgstr "Kubala inchubo"
 
-#: ksgrd/SensorManager.cc:68
-msgid "Read Accesses"
-msgstr "Fundza kutfolakala"
+#~ msgid "Process Controller"
+#~ msgstr "Silawuli senchubo"
 
-#: ksgrd/SensorManager.cc:69
-msgid "Write Accesses"
-msgstr "Bhala kutfolakala"
+#~ msgid ""
+#~ "_: CPU Load\n"
+#~ "Load"
+#~ msgstr "Layisha"
 
-#: ksgrd/SensorManager.cc:70
-msgid "Read Data"
-msgstr "Fundza imininingwane lengakahlutwa"
+#~ msgid "Total Accesses"
+#~ msgstr "Sibalo sekutfolakala "
 
-#: ksgrd/SensorManager.cc:71
-msgid "Write Data"
-msgstr "Bhala imininingwane lengakahlutwa"
+#~ msgid "Read Accesses"
+#~ msgstr "Fundza kutfolakala"
 
-#: ksgrd/SensorManager.cc:72
-msgid "Pages In"
-msgstr "Emakhasi ekhatsi kwe"
+#~ msgid "Write Accesses"
+#~ msgstr "Bhala kutfolakala"
 
-#: ksgrd/SensorManager.cc:73
-msgid "Pages Out"
-msgstr "Emekhasi ngaphandle"
+#~ msgid "Read Data"
+#~ msgstr "Fundza imininingwane lengakahlutwa"
 
-#: ksgrd/SensorManager.cc:74
-msgid "Context Switches"
-msgstr ""
+#~ msgid "Write Data"
+#~ msgstr "Bhala imininingwane lengakahlutwa"
 
-#: ksgrd/SensorManager.cc:75
-msgid "Network"
-msgstr "Luchungechunge"
+#~ msgid "Pages In"
+#~ msgstr "Emakhasi ekhatsi kwe"
 
-#: ksgrd/SensorManager.cc:76
-msgid "Interfaces"
-msgstr "Sichumanisi"
+#~ msgid "Pages Out"
+#~ msgstr "Emekhasi ngaphandle"
 
-#: ksgrd/SensorManager.cc:77
-msgid "Receiver"
-msgstr "Samukeli"
+#~ msgid "Network"
+#~ msgstr "Luchungechunge"
 
-#: ksgrd/SensorManager.cc:78
-msgid "Transmitter"
-msgstr "Sitfumeli"
+#~ msgid "Interfaces"
+#~ msgstr "Sichumanisi"
 
-#: ksgrd/SensorManager.cc:79
-msgid "Data"
-msgstr "Umniningwane lengakahlutwa"
+#~ msgid "Receiver"
+#~ msgstr "Samukeli"
 
-#: ksgrd/SensorManager.cc:80
-msgid "Compressed Packets"
-msgstr "Minyetelanisa emaphakethi"
+#~ msgid "Transmitter"
+#~ msgstr "Sitfumeli"
 
-#: ksgrd/SensorManager.cc:81
-msgid "Dropped Packets"
-msgstr "Emaphakethi lalahliwe"
+#~ msgid "Data"
+#~ msgstr "Umniningwane lengakahlutwa"
 
-#: ksgrd/SensorManager.cc:82
-msgid "Errors"
-msgstr "Emaphutsa"
+#~ msgid "Compressed Packets"
+#~ msgstr "Minyetelanisa emaphakethi"
 
-#: ksgrd/SensorManager.cc:83
-msgid "FIFO Overruns"
-msgstr ""
+#~ msgid "Dropped Packets"
+#~ msgstr "Emaphakethi lalahliwe"
 
-#: ksgrd/SensorManager.cc:84
-msgid "Frame Errors"
-msgstr "Emaphutsa yelifulemu"
+#~ msgid "Errors"
+#~ msgstr "Emaphutsa"
 
-#: ksgrd/SensorManager.cc:85
-msgid "Multicast"
-msgstr ""
-
-#: ksgrd/SensorManager.cc:86
-msgid "Packets"
-msgstr "Emaphakethi"
-
-#: ksgrd/SensorManager.cc:87
-msgid "Carrier"
-msgstr "Sitfwali"
+#~ msgid "Frame Errors"
+#~ msgstr "Emaphutsa yelifulemu"
 
-#: ksgrd/SensorManager.cc:88
-msgid "Collisions"
-msgstr "Kunchubutana"
+#~ msgid "Packets"
+#~ msgstr "Emaphakethi"
 
-#: ksgrd/SensorManager.cc:89
-msgid "Sockets"
-msgstr "Emasokhethi"
+#~ msgid "Carrier"
+#~ msgstr "Sitfwali"
 
-#: ksgrd/SensorManager.cc:90
-msgid "Total Number"
-msgstr "Inamba yesibalo"
+#~ msgid "Collisions"
+#~ msgstr "Kunchubutana"
 
-#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
-msgid "Table"
-msgstr "Lithebulu"
+#~ msgid "Sockets"
+#~ msgstr "Emasokhethi"
 
-#: ksgrd/SensorManager.cc:92
-msgid "Advanced Power Management"
-msgstr "Kuphatfwa kwemandla lokuphambili"
+#~ msgid "Total Number"
+#~ msgstr "Inamba yesibalo"
 
-#: ksgrd/SensorManager.cc:93
-msgid "ACPI"
-msgstr ""
+#~ msgid "Table"
+#~ msgstr "Lithebulu"
 
-#: ksgrd/SensorManager.cc:94
-msgid "Thermal Zone"
-msgstr ""
+#~ msgid "Advanced Power Management"
+#~ msgstr "Kuphatfwa kwemandla lokuphambili"
 
-#: ksgrd/SensorManager.cc:95
 #, fuzzy
-msgid "Temperature"
-msgstr "Lizinga%1"
+#~ msgid "Temperature"
+#~ msgstr "Lizinga%1"
 
-#: ksgrd/SensorManager.cc:96
 #, fuzzy
-msgid "Fan"
-msgstr "Fan%1"
+#~ msgid "Fan"
+#~ msgstr "Fan%1"
 
-#: ksgrd/SensorManager.cc:97
 #, fuzzy
-msgid "State"
-msgstr "Simo"
+#~ msgid "State"
+#~ msgstr "Simo"
 
-#: ksgrd/SensorManager.cc:98
 #, fuzzy
-msgid "Battery"
-msgstr "Kugwalisa libetri"
+#~ msgid "Battery"
+#~ msgstr "Kugwalisa libetri"
 
-#: ksgrd/SensorManager.cc:99
-msgid "Battery Charge"
-msgstr "Kugwalisa libetri"
+#~ msgid "Battery Charge"
+#~ msgstr "Kugwalisa libetri"
 
-#: ksgrd/SensorManager.cc:100
 #, fuzzy
-msgid "Battery Usage"
-msgstr "Kugwalisa libetri"
-
-#: ksgrd/SensorManager.cc:101
-msgid "Remaining Time"
-msgstr "Sikhatsi lesisele"
-
-#: ksgrd/SensorManager.cc:102
-msgid "Interrupts"
-msgstr "Kuphazamisa"
-
-#: ksgrd/SensorManager.cc:104
-msgid "Load Average (5 min)"
-msgstr ""
-
-#: ksgrd/SensorManager.cc:105
-msgid "Load Average (15 min)"
-msgstr ""
-
-#: ksgrd/SensorManager.cc:106
-msgid "Clock Frequency"
-msgstr ""
+#~ msgid "Battery Usage"
+#~ msgstr "Kugwalisa libetri"
 
-#: ksgrd/SensorManager.cc:107
-msgid "Hardware Sensors"
-msgstr ""
+#~ msgid "Remaining Time"
+#~ msgstr "Sikhatsi lesisele"
 
-#: ksgrd/SensorManager.cc:108
-msgid "Partition Usage"
-msgstr ""
+#~ msgid "Interrupts"
+#~ msgstr "Kuphazamisa"
 
-#: ksgrd/SensorManager.cc:109
-msgid "Used Space"
-msgstr "Sikhala lesisetjentisiwe"
+#~ msgid "Used Space"
+#~ msgstr "Sikhala lesisetjentisiwe"
 
-#: ksgrd/SensorManager.cc:110
-msgid "Free Space"
-msgstr ""
+#~ msgid "Fill Level"
+#~ msgstr "Gcwalisa ileveli"
 
-#: ksgrd/SensorManager.cc:111
-msgid "Fill Level"
-msgstr "Gcwalisa ileveli"
+#~ msgid "CPU%1"
+#~ msgstr "CPU%1"
 
-#: ksgrd/SensorManager.cc:115
-#, c-format
-msgid "CPU%1"
-msgstr "CPU%1"
+#~ msgid "Disk%1"
+#~ msgstr "Disk%1"
 
-#: ksgrd/SensorManager.cc:117
-#, c-format
-msgid "Disk%1"
-msgstr "Disk%1"
+#~ msgid "Fan%1"
+#~ msgstr "Fan%1"
 
-#: ksgrd/SensorManager.cc:122
-#, c-format
-msgid "Fan%1"
-msgstr "Fan%1"
+#~ msgid "Temperature%1"
+#~ msgstr "Lizinga%1"
 
-#: ksgrd/SensorManager.cc:124
-#, c-format
-msgid "Temperature%1"
-msgstr "Lizinga%1"
+#~ msgid "Total"
+#~ msgstr "Sibalo"
 
-#: ksgrd/SensorManager.cc:127
-msgid "Total"
-msgstr "Sibalo"
+#~ msgid "Int%1"
+#~ msgstr "Int%1"
 
-#: ksgrd/SensorManager.cc:133
-#, c-format
-msgid "Int%1"
-msgstr "Int%1"
+#~ msgid ""
+#~ "_: the unit 1 per second\n"
+#~ "1/s"
+#~ msgstr "1/s"
 
-#: ksgrd/SensorManager.cc:140
-msgid ""
-"_: the unit 1 per second\n"
-"1/s"
-msgstr "1/s"
+#~ msgid "kBytes"
+#~ msgstr "kBytes"
 
-#: ksgrd/SensorManager.cc:141
-msgid "kBytes"
-msgstr "kBytes"
+#~ msgid ""
+#~ "_: the unit minutes\n"
+#~ "min"
+#~ msgstr "min"
 
-#: ksgrd/SensorManager.cc:142
-msgid ""
-"_: the unit minutes\n"
-"min"
-msgstr "min"
-
-#: ksgrd/SensorManager.cc:143
-msgid ""
-"_: the frequency unit\n"
-"MHz"
-msgstr "MHz"
-
-#: ksgrd/SensorManager.cc:146
-msgid "Integer Value"
-msgstr ""
-
-#: ksgrd/SensorManager.cc:147
-msgid "Floating Point Value"
-msgstr ""
+#~ msgid ""
+#~ "_: the frequency unit\n"
+#~ "MHz"
+#~ msgstr "MHz"
 
-#: ksgrd/SensorManager.cc:289
-msgid "Connection to %1 has been lost."
-msgstr ""
-
-#: ksgrd/StyleSettings.cc:41
-msgid "Global Style Settings"
-msgstr ""
-
-#: ksgrd/StyleSettings.cc:44
-msgid "Display Style"
-msgstr ""
-
-#: ksgrd/StyleSettings.cc:47
 #, fuzzy
-msgid "First foreground color:"
-msgstr "Umbala welingaphambili:"
+#~ msgid "First foreground color:"
+#~ msgstr "Umbala welingaphambili:"
 
-#: ksgrd/StyleSettings.cc:54
 #, fuzzy
-msgid "Second foreground color:"
-msgstr "Umbala welingaphambili:"
-
-#: ksgrd/StyleSettings.cc:85
-msgid "Sensor Colors"
-msgstr "Imibala ye sensor"
-
-#: ksgrd/StyleSettings.cc:91
-msgid "Change Color..."
-msgstr "Tjintja umbala..."
-
-#: ksgrd/StyleSettings.cc:166
-#, c-format
-msgid "Color %1"
-msgstr ""
-
-#: ksgrd/SensorSocketAgent.cc:104
-msgid "Connection to %1 refused"
-msgstr ""
-
-#: ksgrd/SensorSocketAgent.cc:108
-msgid "Host %1 not found"
-msgstr ""
-
-#: ksgrd/SensorSocketAgent.cc:112
-#, c-format
-msgid "Timeout at host %1"
-msgstr ""
-
-#: ksgrd/SensorSocketAgent.cc:116
-#, c-format
-msgid "Network failure host %1"
-msgstr ""
-
-#: ksgrd/TimerSettings.cc:36
-msgid "Timer Settings"
-msgstr ""
-
-#: ksgrd/TimerSettings.cc:43
-msgid "Use update interval of worksheet"
-msgstr ""
-
-#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
-msgid "All displays of the sheet are updated at the rate specified here."
-msgstr ""
+#~ msgid "Second foreground color:"
+#~ msgstr "Umbala welingaphambili:"
 
-#: ksgrd/HostConnector.cc:37
-msgid "Connect Host"
-msgstr ""
+#~ msgid "Sensor Colors"
+#~ msgstr "Imibala ye sensor"
 
-#: ksgrd/HostConnector.cc:44
-msgid "Host:"
-msgstr "Samukeli:"
+#~ msgid "Change Color..."
+#~ msgstr "Tjintja umbala..."
 
-#: ksgrd/HostConnector.cc:54
-msgid "Enter the name of the host you want to connect to."
-msgstr ""
+#~ msgid "Host:"
+#~ msgstr "Samukeli:"
 
-#: ksgrd/HostConnector.cc:61
-msgid "Connection Type"
-msgstr "Luhlobo lwekuchumana"
+#~ msgid "Connection Type"
+#~ msgstr "Luhlobo lwekuchumana"
 
-#: ksgrd/HostConnector.cc:66
 #, fuzzy
-msgid "ssh"
-msgstr "&ssh"
+#~ msgid "ssh"
+#~ msgstr "&ssh"
 
-#: ksgrd/HostConnector.cc:69
-msgid "Select this to use the secure shell to login to the remote host."
-msgstr ""
-
-#: ksgrd/HostConnector.cc:72
 #, fuzzy
-msgid "rsh"
-msgstr "&rsh"
-
-#: ksgrd/HostConnector.cc:73
-msgid "Select this to use the remote shell to login to the remote host."
-msgstr ""
-
-#: ksgrd/HostConnector.cc:76
-msgid "Daemon"
-msgstr "I-Daemon"
+#~ msgid "rsh"
+#~ msgstr "&rsh"
 
-#: ksgrd/HostConnector.cc:77
-msgid ""
-"Select this if you want to connect to a ksysguard daemon that is running on the "
-"machine you want to connect to, and is listening for client requests."
-msgstr ""
+#~ msgid "Daemon"
+#~ msgstr "I-Daemon"
 
-#: ksgrd/HostConnector.cc:80
 #, fuzzy
-msgid "Custom command"
-msgstr "Umyalo"
+#~ msgid "Custom command"
+#~ msgstr "Umyalo"
 
-#: ksgrd/HostConnector.cc:81
-msgid ""
-"Select this to use the command you entered below to start ksysguardd on the "
-"remote host."
-msgstr ""
+#~ msgid "Port:"
+#~ msgstr "Sikhungo:"
 
-#: ksgrd/HostConnector.cc:84
-msgid "Port:"
-msgstr "Sikhungo:"
+#~ msgid "e.g.  3112"
+#~ msgstr "e.g.  3112"
 
-#: ksgrd/HostConnector.cc:90
-msgid ""
-"Enter the port number on which the ksysguard daemon is listening for "
-"connections."
-msgstr ""
-
-#: ksgrd/HostConnector.cc:93
-msgid "e.g.  3112"
-msgstr "e.g.  3112"
-
-#: ksgrd/HostConnector.cc:96
-msgid "Command:"
-msgstr "Umyalo:"
-
-#: ksgrd/HostConnector.cc:105
-msgid "Enter the command that runs ksysguardd on the host you want to monitor."
-msgstr ""
-
-#: ksgrd/HostConnector.cc:109
-msgid "e.g. ssh -l root remote.host.org ksysguardd"
-msgstr ""
-
-#: ksgrd/SensorAgent.cc:88
-msgid ""
-"Message from %1:\n"
-"%2"
-msgstr ""
-"Umbiko lobuya %1:\n"
-"%2"
-
-#: SensorBrowser.cc:77
-msgid "Sensor Browser"
-msgstr ""
-
-#: SensorBrowser.cc:78
-msgid "Sensor Type"
-msgstr ""
-
-#: SensorBrowser.cc:81
-msgid "Drag sensors to empty cells of a worksheet or the panel applet."
-msgstr ""
-
-#: SensorBrowser.cc:88
-msgid ""
-"The sensor browser lists the connected hosts and the sensors that they provide. "
-"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
-"display will appear that visualizes the values provided by the sensor. Some "
-"sensor displays can display values of multiple sensors. Simply drag other "
-"sensors on to the display to add more sensors."
-msgstr ""
-
-#: SensorBrowser.cc:148
-msgid "Drag sensors to empty fields in a worksheet."
-msgstr ""
-
-#: WorkSheetSettings.cc:41
-msgid "Worksheet Properties"
-msgstr ""
-
-#: WorkSheetSettings.cc:67
-msgid "Rows:"
-msgstr ""
-
-#: WorkSheetSettings.cc:76
-msgid "Columns:"
-msgstr ""
+#~ msgid "Command:"
+#~ msgstr "Umyalo:"
 
-#: WorkSheetSettings.cc:97
-msgid "Enter the number of rows the sheet should have."
-msgstr ""
+#~ msgid ""
+#~ "Message from %1:\n"
+#~ "%2"
+#~ msgstr ""
+#~ "Umbiko lobuya %1:\n"
+#~ "%2"
 
-#: WorkSheetSettings.cc:98
-msgid "Enter the number of columns the sheet should have."
-msgstr ""
-
-#: WorkSheetSettings.cc:100
-msgid "Enter the title of the worksheet here."
-msgstr ""
-
-#: ksysguard.cc:64
-msgid "TDE system guard"
-msgstr ""
-
-#: ksysguard.cc:74 ksysguard.cc:556
-msgid "TDE System Guard"
-msgstr ""
-
-#: ksysguard.cc:100
-msgid "88888 Processes"
-msgstr ""
-
-#: ksysguard.cc:101
-msgid "Memory: 88888888888 kB used, 88888888888 kB free"
-msgstr ""
-
-#: ksysguard.cc:103
-msgid "Swap: 888888888 kB used, 888888888 kB free"
-msgstr ""
-
-#: ksysguard.cc:108
 #, fuzzy
-msgid "&New Worksheet..."
-msgstr "&Susa i-sensor"
+#~ msgid "&New Worksheet..."
+#~ msgstr "&Susa i-sensor"
 
-#: ksysguard.cc:111
 #, fuzzy
-msgid "Import Worksheet..."
-msgstr "&Susa i-sensor"
+#~ msgid "Import Worksheet..."
+#~ msgstr "&Susa i-sensor"
 
-#: ksysguard.cc:114
 #, fuzzy
-msgid "&Import Recent Worksheet"
-msgstr "&Susa i-sensor"
+#~ msgid "&Import Recent Worksheet"
+#~ msgstr "&Susa i-sensor"
 
-#: ksysguard.cc:117
 #, fuzzy
-msgid "&Remove Worksheet"
-msgstr "&Susa i-sensor"
+#~ msgid "&Remove Worksheet"
+#~ msgstr "&Susa i-sensor"
 
-#: ksysguard.cc:120
 #, fuzzy
-msgid "&Export Worksheet..."
-msgstr "&Susa i-sensor"
-
-#: ksysguard.cc:125
-msgid "C&onnect Host..."
-msgstr ""
-
-#: ksysguard.cc:127
-msgid "D&isconnect Host"
-msgstr ""
-
-#: ksysguard.cc:133
-msgid "&Worksheet Properties"
-msgstr ""
-
-#: ksysguard.cc:136
-msgid "Load Standard Sheets"
-msgstr ""
-
-#: ksysguard.cc:140
-msgid "Configure &Style..."
-msgstr ""
-
-#: ksysguard.cc:157
-msgid "Do you really want to restore the default worksheets?"
-msgstr ""
-
-#: ksysguard.cc:158
-msgid "Reset All Worksheets"
-msgstr ""
-
-#: ksysguard.cc:159
-msgid "Reset"
-msgstr ""
-
-#: Workspace.cc:105 ksysguard.cc:176
-msgid "Process Table"
-msgstr ""
-
-#: ksysguard.cc:436
-#, c-format
-msgid ""
-"_n: 1 Process\n"
-"%n Processes"
-msgstr ""
-
-#: ksysguard.cc:446
-msgid "Memory: %1 %2 used, %3 %4 free"
-msgstr ""
-
-#: ksysguard.cc:504
-msgid "No swap space available"
-msgstr ""
-
-#: ksysguard.cc:506
-msgid "Swap: %1 %2 used, %3 %4 free"
-msgstr ""
-
-#: ksysguard.cc:515
-msgid "Show only process list of local host"
-msgstr ""
-
-#: ksysguard.cc:516
-msgid "Optional worksheet files to load"
-msgstr ""
-
-#: ksysguard.cc:558
-msgid "(c) 1996-2002 The KSysGuard Developers"
-msgstr ""
-
-#: ksysguard.cc:566
-msgid ""
-"Solaris Support\n"
-"Parts derived (by permission) from the sunos5\n"
-"module of William LeFebvre's \"top\" utility."
-msgstr ""
-
-#: Workspace.cc:53
-msgid ""
-"This is your work space. It holds your worksheets. You need to create a new "
-"worksheet (Menu File->New) before you can drag sensors here."
-msgstr ""
-
-#: Workspace.cc:135
-#, c-format
-msgid "Sheet %1"
-msgstr ""
-
-#: Workspace.cc:165 Workspace.cc:305
-msgid ""
-"The worksheet '%1' contains unsaved data.\n"
-"Do you want to save the worksheet?"
-msgstr ""
-
-#: Workspace.cc:181 Workspace.cc:235
-msgid "*.sgrd|Sensor Files"
-msgstr ""
-
-#: Workspace.cc:184
-msgid "Select Worksheet to Load"
-msgstr ""
-
-#: Workspace.cc:229 Workspace.cc:269
-msgid "You do not have a worksheet that could be saved."
-msgstr ""
-
-#: Workspace.cc:239
-msgid "Save Current Worksheet As"
-msgstr ""
-
-#: Workspace.cc:320
-msgid "There are no worksheets that could be deleted."
-msgstr ""
-
-#: Workspace.cc:448
-msgid "Cannot find file ProcessTable.sgrd."
-msgstr ""
+#~ msgid "&Export Worksheet..."
+#~ msgstr "&Susa i-sensor"
 
 #~ msgid "#"
 #~ msgstr "#"