Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 3786 insertions, 3580 deletions

diff --git a/tde-i18n-zh_TW/messages/tdelibs/tdeio.po b/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
index f98b19cc841..29d9227a0e1 100644
--- a/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
+++ b/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
@@ -12,7 +12,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdeio\n"
-"POT-Creation-Date: 2014-11-05 10:15-0600\n"
+"POT-Creation-Date: 2018-12-08 18:54+0100\n"
 "PO-Revision-Date: 2006-09-05 10:10+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -23,6 +23,213 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.4\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+"Eric Cheng,Chih-Wei Huang,Kenduest Lee,Jouston Huang (Huang, Jiun-Jeng),Wang "
+"Jian,Anthony Fok ,Yuan-Chen Cheng"
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+"<ericc@shinewave.com.tw>,<cwhuang@linux.org.tw>,<kenduest@i18n.linux.org.tw>,"
+"<jouston@housediy.com>,<lark@linux.net.cn>,<anthony@thizlinux.com>,"
+"<ycheng@slat.org>"
+
+#: bookmarks/kbookmark.cc:117
+msgid "Create New Bookmark Folder"
+msgstr "建立新書籤資料夾"
+
+#: bookmarks/kbookmark.cc:118
+#, c-format
+msgid "Create New Bookmark Folder in %1"
+msgstr "建立新書籤資料夾於 %1"
+
+#: bookmarks/kbookmark.cc:120
+msgid "New folder:"
+msgstr "新資料夾:"
+
+#: bookmarks/kbookmark.cc:286
+msgid "--- separator ---"
+msgstr "--- 分隔符號 ---"
+
+#: bookmarks/kbookmarkimporter_ns.cc:110 bookmarks/kbookmarkimporter_ns.cc:113
+msgid "*.html|HTML Files (*.html)"
+msgstr "*.html|HTML 檔案 (*.html)"
+
+#: bookmarks/kbookmarkimporter_ns.cc:197
+msgid "<!-- This file was generated by Konqueror -->"
+msgstr "<!-- 這個檔案由 Konqueror 程式所產生 -->"
+
+#: bookmarks/kbookmarkimporter_ns.cc:200 bookmarks/kbookmarkimporter_ns.cc:201
+#: bookmarks/kbookmarkmenu.cc:1006 tdefile/tdefiledialog.cpp:2278
+#, fuzzy
+msgid "Bookmarks"
+msgstr "書籤"
+
+#: bookmarks/kbookmarkimporter_opera.cc:110
+#: bookmarks/kbookmarkimporter_opera.cc:113
+msgid "*.adr|Opera Bookmark Files (*.adr)"
+msgstr "*.adr|Opera 書籤檔案 (*.adr)"
+
+#: bookmarks/kbookmarkmanager.cc:371
+msgid ""
+"Unable to save bookmarks in %1. Reported error was: %2. This error message "
+"will only be shown once. The cause of the error needs to be fixed as quickly "
+"as possible, which is most likely a full hard drive."
+msgstr ""
+"無法儲存書籤於 %1。回報的錯誤為： %2。這個錯誤訊息將只會顯示一次。造成錯誤的"
+"原因需要盡速修正，大多數的情況可能是硬碟已經滿了。"
+
+#: bookmarks/kbookmarkmanager.cc:512 bookmarks/kbookmarkmenu.cc:343
+msgid "Cannot add bookmark with empty URL."
+msgstr "無法新增一個空的 URL 書籤。"
+
+#: bookmarks/kbookmarkmenu.cc:259
+msgid "Add Bookmark Here"
+msgstr "加入書籤於此"
+
+#: bookmarks/kbookmarkmenu.cc:276
+msgid "Open Folder in Bookmark Editor"
+msgstr "在書籤編輯器中開啟資料夾"
+
+#: bookmarks/kbookmarkmenu.cc:279
+msgid "Delete Folder"
+msgstr "刪除資料夾"
+
+#: bookmarks/kbookmarkmenu.cc:282 bookmarks/kbookmarkmenu.cc:293
+#: tdefile/tdediroperator.cpp:1351
+#, fuzzy
+msgid "Properties"
+msgstr "%1 的內容"
+
+#: bookmarks/kbookmarkmenu.cc:287
+msgid "Copy Link Address"
+msgstr "複製連結位址"
+
+#: bookmarks/kbookmarkmenu.cc:290
+msgid "Delete Bookmark"
+msgstr "刪除書籤"
+
+#: bookmarks/kbookmarkmenu.cc:318
+msgid "Bookmark Properties"
+msgstr "書籤屬性"
+
+#: bookmarks/kbookmarkmenu.cc:381
+msgid ""
+"Are you sure you wish to remove the bookmark folder\n"
+"\"%1\"?"
+msgstr ""
+"您確定希望移除書籤資料夾\n"
+"「%1」？"
+
+#: bookmarks/kbookmarkmenu.cc:382
+msgid ""
+"Are you sure you wish to remove the bookmark\n"
+"\"%1\"?"
+msgstr ""
+"您確定希望移除書籤\n"
+"「%1」？"
+
+#: bookmarks/kbookmarkmenu.cc:383
+msgid "Bookmark Folder Deletion"
+msgstr "書籤資料夾刪除"
+
+#: bookmarks/kbookmarkmenu.cc:384
+msgid "Bookmark Deletion"
+msgstr "書籤刪除"
+
+#: bookmarks/kbookmarkmenu.cc:486
+msgid "Bookmark Tabs as Folder..."
+msgstr "書籤分頁成為資料夾..."
+
+#: bookmarks/kbookmarkmenu.cc:495
+msgid "Add a folder of bookmarks for all open tabs."
+msgstr "把所有開啟的分頁加入成為書籤的資料夾。"
+
+#: bookmarks/kbookmarkmenu.cc:506 bookmarks/kbookmarkmenu_p.h:146
+msgid "Add Bookmark"
+msgstr "加入書籤"
+
+#: bookmarks/kbookmarkmenu.cc:515
+msgid "Add a bookmark for the current document"
+msgstr "將目前文件加入書籤內"
+
+#: bookmarks/kbookmarkmenu.cc:529
+msgid "Edit your bookmark collection in a separate window"
+msgstr "在另外的視窗編輯書籤內容"
+
+#: bookmarks/kbookmarkmenu.cc:538
+msgid "&New Bookmark Folder..."
+msgstr "新書籤資料夾(&N)..."
+
+#: bookmarks/kbookmarkmenu.cc:550
+msgid "Create a new bookmark folder in this menu"
+msgstr "在該選單內建立新書籤資料夾"
+
+#: bookmarks/kbookmarkmenu.cc:684
+msgid "Quick Actions"
+msgstr "快速動作"
+
+#: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:270
+#: bookmarks/kbookmarkmenu.cc:791 tdefile/kpropertiesdialog.cpp:4030
+#: tdeio/tdefileitem.cpp:948
+msgid "Name:"
+msgstr "名稱："
+
+#: bookmarks/kbookmarkmenu.cc:797 tdefile/kpropertiesdialog.cpp:992
+#: tdefile/kurlrequesterdlg.cpp:47
+msgid "Location:"
+msgstr "位置："
+
+#: bookmarks/kbookmarkmenu.cc:829 tdefile/kpropertiesdialog.cpp:3316
+msgid "&Add"
+msgstr "新增(&A)"
+
+#: bookmarks/kbookmarkmenu.cc:829
+msgid "&Update"
+msgstr ""
+
+#: bookmarks/kbookmarkmenu.cc:831
+msgid "&New Folder..."
+msgstr "新增資料夾(&N)..."
+
+#: bookmarks/kbookmarkmenu.cc:948
+msgid "Bookmark"
+msgstr "書籤"
+
+#: bookmarks/kbookmarkmenu.cc:1115
+msgid "Netscape Bookmarks"
+msgstr "Netscape 書籤"
+
+#: httpfilter/httpfilter.cc:278
+msgid "Unexpected end of data, some information may be lost."
+msgstr "未預期的資料結尾，某些資訊可能遺失。"
+
+#: httpfilter/httpfilter.cc:335
+msgid "Receiving corrupt data."
+msgstr "接收到損毀的資料。"
+
+#: ../tdeioslave/http/http.cc:5191 kpasswdserver/kpasswdserver.cpp:346
+msgid "  Do you want to retry?"
+msgstr "  您要重試嗎？"
+
+#: ../tdeioslave/http/http.cc:5192 kpasswdserver/kpasswdserver.cpp:348
+msgid "Authentication"
+msgstr "認證"
+
+#: kpasswdserver/kpasswdserver.cpp:348
+msgid "Retry"
+msgstr "重試"
+
+#: kpasswdserver/kpasswdserver.cpp:371 tdeio/passdlg.cpp:345
+msgid "Authorization Dialog"
+msgstr "授權對話方塊"
+
 #: kssl/ksslcertdlg.cc:61
 msgid "Certificate"
 msgstr "憑證"
@@ -46,15 +253,119 @@ msgstr "TDE SSL 憑證認證對話方塊"
 
 #: kssl/ksslcertdlg.cc:139
 msgid ""
-"The server <b>%1</b> requests a certificate."
-"<p>Select a certificate to use from the list below:"
+"The server <b>%1</b> requests a certificate.<p>Select a certificate to use "
+"from the list below:"
 msgstr "伺服器 <b>%1</b> 要求憑證。<p>請從底下的清單中選擇要使用的憑證："
 
-#: kssl/ksslinfodlg.cc:92 kssl/ksslinfodlg.cc:149
+#: kssl/ksslcertificate.cc:232
+msgid "Signature Algorithm: "
+msgstr "簽名演算法:"
+
+#: kssl/ksslcertificate.cc:233
+msgid "Unknown"
+msgstr "未知"
+
+#: kssl/ksslcertificate.cc:236
+msgid "Signature Contents:"
+msgstr "簽名內容:"
+
+#: kssl/ksslcertificate.cc:368
+msgid ""
+"_: Unknown\n"
+"Unknown key algorithm"
+msgstr "未知的密碼匙演算法"
+
+#: kssl/ksslcertificate.cc:371
+msgid "Key type: RSA (%1 bit)"
+msgstr "密碼匙類型: RSA (%1 bit)"
+
+#: kssl/ksslcertificate.cc:378
+msgid "Modulus: "
+msgstr "模組: "
+
+#: kssl/ksslcertificate.cc:391
+msgid "Exponent: 0x"
+msgstr "指數: 0x"
+
+#: kssl/ksslcertificate.cc:397
+msgid "Key type: DSA (%1 bit)"
+msgstr "密碼匙類型: DSA (%1 bit)"
+
+#: kssl/ksslcertificate.cc:408
+msgid "Prime: "
+msgstr "質數: "
+
+#: kssl/ksslcertificate.cc:422
+msgid "160 bit prime factor: "
+msgstr "160 bit 質因數: "
+
+#: kssl/ksslcertificate.cc:446
+msgid "Public key: "
+msgstr "公開金鑰:"
+
+#: kssl/ksslcertificate.cc:990
+msgid "The certificate is valid."
+msgstr "憑證是合法的。"
+
+#: kssl/ksslcertificate.cc:994
+msgid ""
+"Certificate signing authority root files could not be found so the "
+"certificate is not verified."
+msgstr "憑證簽名授權 root 檔無法找到，所以無法驗證憑證。"
+
+#: kssl/ksslcertificate.cc:997
+msgid "Certificate signing authority is unknown or invalid."
+msgstr "憑證簽名授權是未知的或非法的。"
+
+#: kssl/ksslcertificate.cc:999
+msgid "Certificate is self-signed and thus may not be trustworthy."
+msgstr "憑證是自我簽名的，因此也許不可信賴。"
+
+#: kssl/ksslcertificate.cc:1001
+msgid "Certificate has expired."
+msgstr "認證已經過期。"
+
+#: kssl/ksslcertificate.cc:1003
+msgid "Certificate has been revoked."
+msgstr "認證已經被撤回。"
+
+#: kssl/ksslcertificate.cc:1005
+msgid "SSL support was not found."
+msgstr "無法找到 SSL 支援。"
+
+#: kssl/ksslcertificate.cc:1007
+msgid "Signature is untrusted."
+msgstr "簽名不被信任。"
+
+#: kssl/ksslcertificate.cc:1009
+msgid "Signature test failed."
+msgstr "簽名測試失敗。"
+
+#: kssl/ksslcertificate.cc:1012
+msgid "Rejected, possibly due to an invalid purpose."
+msgstr "拒絕，可能由於是不合法的意圖"
+
+#: kssl/ksslcertificate.cc:1014
+msgid "Private key test failed."
+msgstr "私人密碼匙測試失敗。"
+
+#: kssl/ksslcertificate.cc:1016
+msgid "The certificate has not been issued for this host."
+msgstr "此認證並非由這個主機所發佈的。"
+
+#: kssl/ksslcertificate.cc:1018
+msgid "This certificate is not relevant."
+msgstr "這個憑證是不相關的。"
+
+#: kssl/ksslcertificate.cc:1023
+msgid "The certificate is invalid."
+msgstr "憑證是非法的。"
+
+#: kssl/ksslinfodlg.cc:92 kssl/ksslinfodlg.cc:151
 msgid "Current connection is secured with SSL."
 msgstr "目前連線使用 SSL 安全機制。"
 
-#: kssl/ksslinfodlg.cc:95 kssl/ksslinfodlg.cc:152
+#: kssl/ksslinfodlg.cc:95 kssl/ksslinfodlg.cc:155
 msgid "Current connection is not secured with SSL."
 msgstr "目前連線沒有使用 SSL 安全機制。"
 
@@ -75,208 +386,104 @@ msgid ""
 "The main part of this document is secured with SSL, but some parts are not."
 msgstr "該文件內的主要部份是使用 SSL 連線，但是有些部份則不是。"
 
-#: kssl/ksslinfodlg.cc:144
+#: kssl/ksslinfodlg.cc:145
 msgid "Some of this document is secured with SSL, but the main part is not."
 msgstr "該文件內的一部份有是使用 SSL 連線，但是絕大部份都不是。"
 
-#: kssl/ksslinfodlg.cc:184
+#: kssl/ksslinfodlg.cc:188
 msgid "Chain:"
 msgstr "信任鏈:"
 
-#: kssl/ksslinfodlg.cc:193
+#: kssl/ksslinfodlg.cc:197
 msgid "0 - Site Certificate"
 msgstr "0 - 站台認證憑證"
 
-#: kssl/ksslinfodlg.cc:210
+#: kssl/ksslinfodlg.cc:214
 msgid "Peer certificate:"
 msgstr "對等憑證:"
 
-#: kssl/ksslinfodlg.cc:212
+#: kssl/ksslinfodlg.cc:216
 msgid "Issuer:"
 msgstr "配發者:"
 
-#: kssl/ksslinfodlg.cc:218
+#: kssl/ksslinfodlg.cc:222
 msgid "IP address:"
 msgstr "IP 位址:"
 
-#: kssl/ksslinfodlg.cc:227 tdefile/kpropertiesdialog.cpp:2613
+#: kssl/ksslinfodlg.cc:231 tdefile/kpropertiesdialog.cpp:2613
 msgid "URL:"
 msgstr "URL："
 
-#: kssl/ksslinfodlg.cc:230
+#: kssl/ksslinfodlg.cc:234
 msgid "Certificate state:"
 msgstr "憑證狀態:"
 
-#: kssl/ksslinfodlg.cc:236
+#: kssl/ksslinfodlg.cc:240
 msgid "Valid from:"
 msgstr "有效期自:"
 
-#: kssl/ksslinfodlg.cc:238
+#: kssl/ksslinfodlg.cc:242
 msgid "Valid until:"
 msgstr "有效期到:"
 
-#: kssl/ksslinfodlg.cc:241
+#: kssl/ksslinfodlg.cc:245
 msgid "Serial number:"
 msgstr "序號:"
 
-#: kssl/ksslinfodlg.cc:243
+#: kssl/ksslinfodlg.cc:247
 msgid "MD5 digest:"
 msgstr "MD5 摘要:"
 
-#: kssl/ksslinfodlg.cc:246
+#: kssl/ksslinfodlg.cc:250
 msgid "Cipher in use:"
 msgstr "使用的加密編碼:"
 
-#: kssl/ksslinfodlg.cc:248
+#: kssl/ksslinfodlg.cc:252
 msgid "Details:"
 msgstr "詳細資料："
 
-#: kssl/ksslinfodlg.cc:250
+#: kssl/ksslinfodlg.cc:254
 msgid "SSL version:"
 msgstr "SSL 版本:"
 
-#: kssl/ksslinfodlg.cc:252
+#: kssl/ksslinfodlg.cc:256
 msgid "Cipher strength:"
 msgstr "加密編碼強度:"
 
-#: kssl/ksslinfodlg.cc:253
+#: kssl/ksslinfodlg.cc:257
 msgid "%1 bits used of a %2 bit cipher"
 msgstr "使用了 %2 位元加密算法的 %1 位元"
 
-#: kssl/ksslinfodlg.cc:409
+#: kssl/ksslinfodlg.cc:413
 msgid "Organization:"
 msgstr "組織:"
 
-#: kssl/ksslinfodlg.cc:414
+#: kssl/ksslinfodlg.cc:418
 msgid "Organizational unit:"
 msgstr "組織單位:"
 
-#: kssl/ksslinfodlg.cc:419
+#: kssl/ksslinfodlg.cc:423
 msgid "Locality:"
 msgstr "位置:"
 
-#: kssl/ksslinfodlg.cc:424
+#: kssl/ksslinfodlg.cc:428
 msgid ""
 "_: Federal State\n"
 "State:"
 msgstr "狀態:"
 
-#: kssl/ksslinfodlg.cc:429
+#: kssl/ksslinfodlg.cc:433
 msgid "Country:"
 msgstr "國家:"
 
-#: kssl/ksslinfodlg.cc:434
+#: kssl/ksslinfodlg.cc:438
 msgid "Common name:"
 msgstr "一般名稱:"
 
-#: kssl/ksslinfodlg.cc:439
+#: kssl/ksslinfodlg.cc:443
 msgid "Email:"
 msgstr "電子郵件:"
 
-#: kssl/ksslcertificate.cc:202
-msgid "Signature Algorithm: "
-msgstr "簽名演算法:"
-
-#: kssl/ksslcertificate.cc:203
-msgid "Unknown"
-msgstr "未知"
-
-#: kssl/ksslcertificate.cc:206
-msgid "Signature Contents:"
-msgstr "簽名內容:"
-
-#: kssl/ksslcertificate.cc:338
-msgid ""
-"_: Unknown\n"
-"Unknown key algorithm"
-msgstr "未知的密碼匙演算法"
-
-#: kssl/ksslcertificate.cc:341
-msgid "Key type: RSA (%1 bit)"
-msgstr "密碼匙類型: RSA (%1 bit)"
-
-#: kssl/ksslcertificate.cc:344
-msgid "Modulus: "
-msgstr "模組: "
-
-#: kssl/ksslcertificate.cc:357
-msgid "Exponent: 0x"
-msgstr "指數: 0x"
-
-#: kssl/ksslcertificate.cc:363
-msgid "Key type: DSA (%1 bit)"
-msgstr "密碼匙類型: DSA (%1 bit)"
-
-#: kssl/ksslcertificate.cc:366
-msgid "Prime: "
-msgstr "質數: "
-
-#: kssl/ksslcertificate.cc:380
-msgid "160 bit prime factor: "
-msgstr "160 bit 質因數: "
-
-#: kssl/ksslcertificate.cc:404
-msgid "Public key: "
-msgstr "公開金鑰:"
-
-#: kssl/ksslcertificate.cc:920
-msgid "The certificate is valid."
-msgstr "憑證是合法的。"
-
-#: kssl/ksslcertificate.cc:924
-msgid ""
-"Certificate signing authority root files could not be found so the certificate "
-"is not verified."
-msgstr "憑證簽名授權 root 檔無法找到，所以無法驗證憑證。"
-
-#: kssl/ksslcertificate.cc:927
-msgid "Certificate signing authority is unknown or invalid."
-msgstr "憑證簽名授權是未知的或非法的。"
-
-#: kssl/ksslcertificate.cc:929
-msgid "Certificate is self-signed and thus may not be trustworthy."
-msgstr "憑證是自我簽名的，因此也許不可信賴。"
-
-#: kssl/ksslcertificate.cc:931
-msgid "Certificate has expired."
-msgstr "認證已經過期。"
-
-#: kssl/ksslcertificate.cc:933
-msgid "Certificate has been revoked."
-msgstr "認證已經被撤回。"
-
-#: kssl/ksslcertificate.cc:935
-msgid "SSL support was not found."
-msgstr "無法找到 SSL 支援。"
-
-#: kssl/ksslcertificate.cc:937
-msgid "Signature is untrusted."
-msgstr "簽名不被信任。"
-
-#: kssl/ksslcertificate.cc:939
-msgid "Signature test failed."
-msgstr "簽名測試失敗。"
-
-#: kssl/ksslcertificate.cc:942
-msgid "Rejected, possibly due to an invalid purpose."
-msgstr "拒絕，可能由於是不合法的意圖"
-
-#: kssl/ksslcertificate.cc:944
-msgid "Private key test failed."
-msgstr "私人密碼匙測試失敗。"
-
-#: kssl/ksslcertificate.cc:946
-msgid "The certificate has not been issued for this host."
-msgstr "此認證並非由這個主機所發佈的。"
-
-#: kssl/ksslcertificate.cc:948
-msgid "This certificate is not relevant."
-msgstr "這個憑證是不相關的。"
-
-#: kssl/ksslcertificate.cc:953
-msgid "The certificate is invalid."
-msgstr "憑證是非法的。"
-
 #: kssl/ksslkeygen.cc:48
 msgid "TDE Certificate Request"
 msgstr "TDE 認證請求"
@@ -309,23 +516,23 @@ msgstr "儲存"
 msgid "Do Not Store"
 msgstr "不要儲存"
 
-#: kssl/ksslkeygen.cc:210
+#: kssl/ksslkeygen.cc:209
 msgid "2048 (High Grade)"
 msgstr "2048 (高階)"
 
-#: kssl/ksslkeygen.cc:211
+#: kssl/ksslkeygen.cc:210
 msgid "1024 (Medium Grade)"
 msgstr "1024 (中階)"
 
-#: kssl/ksslkeygen.cc:212
+#: kssl/ksslkeygen.cc:211
 msgid "768  (Low Grade)"
 msgstr "768  (低階)"
 
-#: kssl/ksslkeygen.cc:213
+#: kssl/ksslkeygen.cc:212
 msgid "512  (Low Grade)"
 msgstr "512  (低階)"
 
-#: kssl/ksslkeygen.cc:215
+#: kssl/ksslkeygen.cc:214
 msgid "No SSL support."
 msgstr "不支援 SSL。"
 
@@ -333,177 +540,2249 @@ msgstr "不支援 SSL。"
 msgid "Certificate password"
 msgstr "憑證密碼"
 
-#: kssl/ksslutils.cc:79
+#: kssl/ksslutils.cc:88
 msgid "GMT"
 msgstr "GMT"
 
-#: tdeio/kimageio.cpp:231
-msgid "All Pictures"
-msgstr "所有圖片"
+#: misc/kpac/discovery.cpp:116
+msgid "Could not find a usable proxy configuration script"
+msgstr "無法找到可用的代理伺服器組態命令稿"
 
-#: tdeio/paste.cpp:49 tdeio/paste.cpp:115
-msgid "Filename for clipboard content:"
-msgstr "剪貼簿內容的檔名："
+#: misc/kpac/downloader.cpp:81
+#, c-format
+msgid ""
+"Could not download the proxy configuration script:\n"
+"%1"
+msgstr ""
+"無法下載代理伺服器組態命令稿：\n"
+"%1"
 
-#: tdeio/global.cpp:749 tdeio/job.cpp:1796 tdeio/job.cpp:3263
-#: tdeio/job.cpp:3780 tdeio/paste.cpp:65
-msgid "File Already Exists"
-msgstr "檔案已存在"
+#: misc/kpac/downloader.cpp:83
+msgid "Could not download the proxy configuration script"
+msgstr "無法下載代理伺服器組態命令稿"
 
-#: tdeio/paste.cpp:108
-msgid "%1 (%2)"
-msgstr "%1 (%2)"
+#: misc/kpac/proxyscout.cpp:124
+#, c-format
+msgid ""
+"The proxy configuration script is invalid:\n"
+"%1"
+msgstr ""
+"代理伺服器組態命令稿無效：\n"
+"%1"
 
-#: tdeio/paste.cpp:123
+#: misc/kpac/proxyscout.cpp:184
+#, c-format
 msgid ""
-"The clipboard has changed since you used 'paste': the chosen data format is no "
-"longer applicable. Please copy again what you wanted to paste."
-msgstr "當您使用「貼上」時剪貼簿已經改變了：所選擇的資料格式已經不適用了。請再次複製您所想要貼上的項目。"
+"The proxy configuration script returned an error:\n"
+"%1"
+msgstr ""
+"代理伺服器組態命令稿傳回一個錯誤：\n"
+"%1"
 
-#: tdeio/paste.cpp:201 tdeio/paste.cpp:224 tdeio/paste.cpp:251
-msgid "The clipboard is empty"
-msgstr "剪貼簿是空的"
+#: misc/tdefile/fileprops.cpp:200
+msgid "Do not print the mimetype of the given file(s)"
+msgstr "不要顯示指定檔案的 MIME 類型"
 
-#: tdeio/kdirlister.cpp:296 tdeio/kdirlister.cpp:307 tdeio/krun.cpp:996
-#: tdeio/paste.cpp:213 tdeio/renamedlg.cpp:433
+#: misc/tdefile/fileprops.cpp:204
+msgid ""
+"List all supported metadata keys of the given file(s). If mimetype is not "
+"specified, the mimetype of the given files is used."
+msgstr ""
+"列出指定檔案所有支援的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 "
+"mime 類型。"
+
+#: misc/tdefile/fileprops.cpp:210
+msgid ""
+"List all preferred metadata keys of the given file(s). If mimetype is not "
+"specified, the mimetype of the given files is used."
+msgstr ""
+"列出指定檔案所有偏好的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 "
+"mime 類型。"
+
+#: misc/tdefile/fileprops.cpp:216
+msgid "List all metadata keys which have a value in the given file(s)."
+msgstr "列出指定檔案所有具有數值的中繼資料鍵值。"
+
+#: misc/tdefile/fileprops.cpp:221
+msgid "Prints all mimetypes for which metadata support is available."
+msgstr "列出所有可支援中繼資料的 mime 類型。"
+
+#: misc/tdefile/fileprops.cpp:226
+msgid ""
+"Do not print a warning when more than one file was given and they do not all "
+"have the same mimetype."
+msgstr "當指定超過一個以上的檔案而他們並沒有相同的 mime 類型時不要顯示警示。"
+
+#: misc/tdefile/fileprops.cpp:231
+msgid "Prints all metadata values, available in the given file(s)."
+msgstr "列出指定檔案中可用的所有中繼資料數值。"
+
+#: misc/tdefile/fileprops.cpp:236
+msgid "Prints the preferred metadata values, available in the given file(s)."
+msgstr "列出指定檔案中可用的偏好中繼資料數值。"
+
+#: misc/tdefile/fileprops.cpp:240
+msgid ""
+"Opens a TDE properties dialog to allow viewing and modifying of metadata of "
+"the given file(s)"
+msgstr "開啟 TDE 屬性對話盒以便檢視並修改指定檔案的中繼資料"
+
+#: misc/tdefile/fileprops.cpp:244
+msgid ""
+"Prints the value for 'key' of the given file(s). 'key' may also be a comma-"
+"separated list of keys"
+msgstr "列出指定檔案的「鍵」值。「鍵」值也可能是以逗號分隔的鍵值清單"
+
+#: misc/tdefile/fileprops.cpp:248
+msgid ""
+"Attempts to set the value 'value' for the metadata key 'key' for the given "
+"file(s)"
+msgstr "嘗試設定指定檔案的中繼鍵值「key」的數值「value」"
+
+#: misc/tdefile/fileprops.cpp:251
+msgid "The group to get values from or set values to"
+msgstr "要取得或設定數值的群組"
+
+#: misc/tdefile/fileprops.cpp:255
+msgid "The file (or a number of files) to operate on."
+msgstr "要操作的檔案（或是檔案的數字）。"
+
+#: misc/tdefile/fileprops.cpp:270
+msgid "No support for metadata extraction found."
+msgstr "找不到提取中繼資料的支援。"
+
+#: misc/tdefile/fileprops.cpp:275
+msgid "Supported MimeTypes:"
+msgstr "支援的 MIME 類型:"
+
+#: misc/tdefile/fileprops.cpp:410
+msgid "tdefile"
+msgstr "tdefile"
+
+#: misc/tdefile/fileprops.cpp:411
+msgid "A commandline tool to read and modify metadata of files."
+msgstr "用來讀取和修改檔案中繼資料的命令列工具。"
+
+#: misc/tdefile/fileprops.cpp:438
+msgid "No files specified"
+msgstr "沒有指定檔案"
+
+#: misc/tdefile/fileprops.cpp:467
+msgid "Cannot determine metadata"
+msgstr "無法辨識中繼資料"
+
+#: misc/tdemailservice.cpp:32
+msgid "KMailService"
+msgstr "KMail服務"
+
+#: misc/tdemailservice.cpp:32
+msgid "Mail service"
+msgstr "郵件服務"
+
+#: misc/tdesendbugmail/main.cpp:22
+msgid "Subject line"
+msgstr "主題行"
+
+#: misc/tdesendbugmail/main.cpp:23
+msgid "Recipient"
+msgstr "收件者"
+
+#: misc/tdesendbugmail/main.cpp:33
+msgid "Error connecting to server."
+msgstr "連線到伺服器發生錯誤。"
+
+#: misc/tdesendbugmail/main.cpp:36
+msgid "Not connected."
+msgstr "尚未連接。"
+
+#: misc/tdesendbugmail/main.cpp:39
+msgid "Connection timed out."
+msgstr "連線逾時。"
+
+#: misc/tdesendbugmail/main.cpp:42
+msgid "Time out waiting for server interaction."
+msgstr "等候伺服器回應逾時。"
+
+#: misc/tdesendbugmail/main.cpp:46
+msgid "Server said: \"%1\""
+msgstr "伺服器回應: \"%1\""
+
+#: misc/tdesendbugmail/main.cpp:62
+msgid "KSendBugMail"
+msgstr "KSendBugMail"
+
+#: misc/tdesendbugmail/main.cpp:63
+msgid "Sends a short bug report to submit@bugs.trinitydesktop.org"
+msgstr "寄一封簡短的錯誤報告到 submit@bugs.trinitydesktop.org"
+
+#: misc/tdesendbugmail/main.cpp:65
+msgid "Author"
+msgstr "作者"
+
+#: misc/tdetelnetservice.cpp:41
+msgid "telnet service"
+msgstr "遠端登入服務"
+
+#: misc/tdetelnetservice.cpp:42
+msgid "telnet protocol handler"
+msgstr "遠端登入協定處理器"
+
+#: misc/tdetelnetservice.cpp:76
+msgid "You do not have permission to access the %1 protocol."
+msgstr "您可能沒有權限存取 %1 通訊協定。"
+
+#: misc/tdewalletd/tdewalletd.cpp:438
+msgid ""
+"<qt>TDE has requested to open the wallet '<b>%1</b>'. Please enter the "
+"password for this wallet below."
+msgstr "<qt>TDE 被要求開啟錢包「<b>%1</b>」。請在下面輸入這個錢包的密碼。"
+
+#: misc/tdewalletd/tdewalletd.cpp:440
+msgid ""
+"<qt>The application '<b>%1</b>' has requested to open the wallet '<b>%2</"
+"b>'. Please enter the password for this wallet below."
+msgstr ""
+"<qt>應用程式「<b>%1</b>」要求開啟錢包「<b>%2</b>」。請在下面輸入這個錢包的密"
+"碼。"
+
+#: misc/tdewalletd/tdewalletd.cpp:443 misc/tdewalletd/tdewalletd.cpp:457
+#: tdefile/tdefiledialog.cpp:1847
+msgid "&Open"
+msgstr "開啟(&O)"
+
+#: misc/tdewalletd/tdewalletd.cpp:452
+msgid ""
+"TDE has requested to open the wallet. This is used to store sensitive data "
+"in a secure fashion. Please enter a password to use with this wallet or "
+"click cancel to deny the application's request."
+msgstr ""
+"TDE 被要求開啟錢包。這是一種很安全的儲存敏感資料的方式。請輸入密碼來使用這個"
+"錢包或者按取消來拒絕應用程式的要求。"
+
+#: misc/tdewalletd/tdewalletd.cpp:454
+msgid ""
+"<qt>The application '<b>%1</b>' has requested to open the TDE wallet. This "
+"is used to store sensitive data in a secure fashion. Please enter a password "
+"to use with this wallet or click cancel to deny the application's request."
+msgstr ""
+"<qt>應用程式「<b>%1</b>」要求開啟 TDE 錢包。這是一種很安全的儲存敏感資料的方"
+"式。請輸入密碼來使用這個錢包或者按取消來拒絕應用程式的要求。"
+
+#: misc/tdewalletd/tdewalletd.cpp:461
+msgid ""
+"<qt>TDE has requested to create a new wallet named '<b>%1</b>'. Please "
+"choose a password for this wallet, or cancel to deny the application's "
+"request."
+msgstr ""
+"<qt>TDE 被要求建立一個新的名為「<b>%1</b>」的錢包。請選擇給這個錢包使用的密"
+"碼，或者按取消來拒絕應用程式的要求。"
+
+#: misc/tdewalletd/tdewalletd.cpp:463
+msgid ""
+"<qt>The application '<b>%1</b>' has requested to create a new wallet named "
+"'<b>%2</b>'. Please choose a password for this wallet, or cancel to deny the "
+"application's request."
+msgstr ""
+"<qt>應用程式「<b>%1</b>」要求建立一個新的名為「<b>%2</b>」的錢包。請選擇給這"
+"個錢包使用的密碼，或者按取消來拒絕應用程式的要求。"
+
+#: misc/tdewalletd/tdewalletd.cpp:466
+msgid "C&reate"
+msgstr "建立(&R)"
+
+#: misc/tdewalletd/tdewalletd.cpp:470 misc/tdewalletd/tdewalletd.cpp:645
+#: misc/tdewalletd/tdewalletd.cpp:661 misc/tdewalletd/tdewalletd.cpp:672
+#: misc/tdewalletd/tdewalletd.cpp:677 misc/tdewalletd/tdewalletd.cpp:1237
+msgid "TDE Wallet Service"
+msgstr "TDE 錢包服務"
+
+#: misc/tdewalletd/tdewalletd.cpp:482
+msgid ""
+"<qt>Error opening the wallet '<b>%1</b>'. Please try again.<br>(Error code "
+"%2: %3)"
+msgstr ""
+"<qt>在開啟錢包「<b>%1</b>」時發生錯誤。請再試一次。<br>(錯誤代碼 %2: %3)"
+
+#: misc/tdewalletd/tdewalletd.cpp:556
+msgid "<qt>TDE has requested access to the open wallet '<b>%1</b>'."
+msgstr "<qt>TDE 被要求存取開啟的錢包「<b>%1</b>」。"
+
+#: misc/tdewalletd/tdewalletd.cpp:558
+msgid ""
+"<qt>The application '<b>%1</b>' has requested access to the open wallet '<b>"
+"%2</b>'."
+msgstr "<qt>應用程式「<b>%1</b>」要求存取開啟的錢包「<b>%2</b>」。"
+
+#: misc/tdewalletd/tdewalletd.cpp:645
+msgid ""
+"Unable to open wallet. The wallet must be opened in order to change the "
+"password."
+msgstr "無法開啟錢包。必須開啟這個錢包才能夠改變密碼。"
+
+#: misc/tdewalletd/tdewalletd.cpp:660
+msgid "<qt>Please choose a new password for the wallet '<b>%1</b>'."
+msgstr "<qt>請選擇一個新的密碼給錢包「<b>%1</b>」。"
+
+#: misc/tdewalletd/tdewalletd.cpp:672
+msgid "Error re-encrypting the wallet. Password was not changed."
+msgstr "重新加密錢包時發生錯誤。密碼尚未變更。"
+
+#: misc/tdewalletd/tdewalletd.cpp:677
+msgid "Error reopening the wallet. Data may be lost."
+msgstr "重開錢包發生錯誤。資料可能流失。"
+
+#: misc/tdewalletd/tdewalletd.cpp:1237
+msgid ""
+"There have been repeated failed attempts to gain access to a wallet. An "
+"application may be misbehaving."
+msgstr "嘗試取得錢包的存取權發生重複的錯誤。此應用程式可能有問題。"
+
+#: misc/tdewalletd/tdewalletwizard.ui.h:23
+msgid "<qt>Password is empty.  <b>(WARNING: Insecure)"
+msgstr "<qt>密碼是空的。  <b>(警告：不安全)"
+
+#: misc/tdewalletd/tdewalletwizard.ui.h:25
+msgid "Passwords match."
+msgstr "密碼相符。"
+
+#: misc/tdewalletd/tdewalletwizard.ui.h:28
+msgid "Passwords do not match."
+msgstr "密碼不符。"
+
+#: misc/uiserver.cpp:98 misc/uiserver.cpp:603 misc/uiserver.cpp:682
+msgid "Settings..."
+msgstr "設定..."
+
+#: tdefile/kpropertiesdesktopbase.ui:274 misc/uiserver.cpp:99
+#: tdefile/kcustommenueditor.cpp:99
+#, fuzzy, no-c-format
+msgid "Remove"
+msgstr "移除項目(&R)"
+
+#: misc/uiserver.cpp:126
+msgid "Configure Network Operation Window"
+msgstr "設定網路操作視窗"
+
+#: misc/uiserver.cpp:130
+msgid "Show system tray icon"
+msgstr "系統匣圖示"
+
+#: misc/uiserver.cpp:131
+msgid "Keep network operation window always open"
+msgstr "保持網路操作視窗永遠開啟"
+
+#: misc/uiserver.cpp:132
+msgid "Show column headers"
+msgstr "顯示欄位標題"
+
+#: misc/uiserver.cpp:133
+msgid "Show toolbar"
+msgstr "顯示工具列"
+
+#: misc/uiserver.cpp:134
+msgid "Show statusbar"
+msgstr "顯示狀態列"
+
+#: misc/uiserver.cpp:135
+msgid "Column widths are user adjustable"
+msgstr "欄位寬度是使用者可以調整的"
+
+#: misc/uiserver.cpp:136
+msgid "Show information:"
+msgstr "顯示資訊:"
+
+#: misc/uiserver.cpp:143 misc/uiserver.cpp:474
+msgid "URL"
+msgstr "URL"
+
+#: misc/uiserver.cpp:144 misc/uiserver.cpp:473
+msgid ""
+"_: Remaining Time\n"
+"Rem. Time"
+msgstr "剩餘時間"
+
+#: misc/uiserver.cpp:145 misc/uiserver.cpp:472
+msgid "Speed"
+msgstr "速度"
+
+#: misc/uiserver.cpp:146 misc/uiserver.cpp:471 tdefile/tdefiledetailview.cpp:67
+msgid "Size"
+msgstr "大小"
+
+#: misc/uiserver.cpp:147 misc/uiserver.cpp:470
 #, c-format
+msgid "%"
+msgstr "%"
+
+#: misc/uiserver.cpp:148 misc/uiserver.cpp:469
+msgid "Count"
+msgstr "記數"
+
+#: misc/uiserver.cpp:149 misc/uiserver.cpp:468
 msgid ""
-"Malformed URL\n"
+"_: Resume\n"
+"Res."
+msgstr "恢復"
+
+#: misc/uiserver.cpp:150 misc/uiserver.cpp:467
+msgid "Local Filename"
+msgstr "本地檔名"
+
+#: misc/uiserver.cpp:151 misc/uiserver.cpp:466
+msgid "Operation"
+msgstr "作業"
+
+#: misc/uiserver.cpp:254
+msgid "%1 / %2"
+msgstr "%1 / %2"
+
+#: misc/uiserver.cpp:288 tdeio/defaultprogress.cpp:325
+msgid "Stalled"
+msgstr "暫停"
+
+#: misc/uiserver.cpp:291
+msgid "%1/s"
+msgstr "%1/秒"
+
+#: misc/uiserver.cpp:302
+msgid "Copying"
+msgstr "複製中"
+
+#: misc/uiserver.cpp:311
+msgid "Moving"
+msgstr "移動中"
+
+#: misc/uiserver.cpp:320
+msgid "Creating"
+msgstr "建立中"
+
+#: misc/uiserver.cpp:329
+msgid "Deleting"
+msgstr "刪除中"
+
+#: misc/uiserver.cpp:337
+msgid "Loading"
+msgstr "載入中"
+
+#: misc/uiserver.cpp:362
+msgid "Examining"
+msgstr "檢查中"
+
+#: misc/uiserver.cpp:370
+msgid "Mounting"
+msgstr "裝載中"
+
+#: misc/uiserver.cpp:378 tdeio/defaultprogress.cpp:410
+msgid "Unmounting"
+msgstr "卸載中"
+
+#: misc/uiserver.cpp:600
+#, fuzzy
+msgid "Cancel"
+msgstr "取消工作"
+
+#: misc/uiserver.cpp:608 misc/uiserver.cpp:1097
+msgid " Files: %1 "
+msgstr " 檔案: %1 "
+
+#: misc/uiserver.cpp:609
+msgid ""
+"_: Remaining Size\n"
+" Rem. Size: %1 kB "
+msgstr " 剩餘大小: %1 kB "
+
+#: misc/uiserver.cpp:610
+msgid ""
+"_: Remaining Time\n"
+" Rem. Time: 00:00:00 "
+msgstr " 剩餘時間: 00:00:00 "
+
+#: misc/uiserver.cpp:611
+msgid " %1 kB/s "
+msgstr " %1 kB/秒 "
+
+#: misc/uiserver.cpp:632 tdeio/defaultprogress.cpp:179
+msgid "Progress Dialog"
+msgstr "進度對話方塊"
+
+#: misc/uiserver.cpp:679
+msgid "Cancel Job"
+msgstr "取消工作"
+
+#: misc/uiserver.cpp:1098
+msgid ""
+"_: Remaining Size\n"
+" Rem. Size: %1 "
+msgstr " 剩餘大小: %1"
+
+#: misc/uiserver.cpp:1100
+msgid ""
+"_: Remaining Time\n"
+" Rem. Time: %1 "
+msgstr " 剩餘時間: %1"
+
+#: misc/uiserver.cpp:1102 tdeio/statusbarprogress.cpp:134
+msgid " %1/s "
+msgstr " %1/秒 "
+
+#: misc/uiserver.cpp:1218 tdeio/observer.cpp:332
+msgid "The peer SSL certificate appears to be corrupt."
+msgstr "對等的 SSL 憑證可能損壞了。"
+
+#: misc/uiserver.cpp:1218 tdeio/observer.cpp:332 tdeio/tcpslavebase.cpp:706
+msgid "SSL"
+msgstr "SSL"
+
+#: misc/uiserver.cpp:1384
+msgid "TDE Progress Information UI Server"
+msgstr "TDE 進度資訊使用者介面伺服器"
+
+#: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388
+msgid "Developer"
+msgstr "開發人員"
+
+#: tdefile/kacleditwidget.cpp:63 tdefile/kacleditwidget.cpp:421
+#: tdefile/tdefiledetailview.cpp:70
+msgid "Owner"
+msgstr "擁有者"
+
+#: tdefile/kacleditwidget.cpp:64 tdefile/kacleditwidget.cpp:423
+msgid "Owning Group"
+msgstr "擁有群組"
+
+#: tdefile/kacleditwidget.cpp:65 tdefile/kacleditwidget.cpp:425
+#: tdefile/kpropertiesdialog.cpp:2020
+msgid "Others"
+msgstr "其他"
+
+#: tdefile/kacleditwidget.cpp:66 tdefile/kacleditwidget.cpp:427
+msgid "Mask"
+msgstr "遮罩"
+
+#: tdefile/kacleditwidget.cpp:67 tdefile/kacleditwidget.cpp:429
+msgid "Named User"
+msgstr "已命名使用者"
+
+#: tdefile/kacleditwidget.cpp:68 tdefile/kacleditwidget.cpp:431
+msgid "Named Group"
+msgstr "已命名群組"
+
+#: tdefile/kacleditwidget.cpp:81
+msgid "Add Entry..."
+msgstr "新增項目..."
+
+#: tdefile/kacleditwidget.cpp:83
+msgid "Edit Entry..."
+msgstr "編輯項目..."
+
+#: tdefile/kacleditwidget.cpp:85
+msgid "Delete Entry"
+msgstr "刪除項目"
+
+#: tdefile/kacleditwidget.cpp:280
+msgid " (Default)"
+msgstr " (預設)"
+
+#: tdefile/kacleditwidget.cpp:397
+msgid "Edit ACL Entry"
+msgstr "編輯存取控制清單項目"
+
+#: tdefile/kacleditwidget.cpp:407
+msgid "Entry Type"
+msgstr "項目型態"
+
+#: tdefile/kacleditwidget.cpp:410
+msgid "Default for new files in this folder"
+msgstr "此資料夾新檔案的預設值"
+
+#: tdefile/kacleditwidget.cpp:446
+msgid "User: "
+msgstr "使用者："
+
+#: tdefile/kacleditwidget.cpp:450
+msgid "Group: "
+msgstr "群組："
+
+#: tdefile/kacleditwidget.cpp:563
+msgid "Type"
+msgstr "類型"
+
+#: tdefile/kacleditwidget.cpp:564 tdefile/tdefiledetailview.cpp:66
+msgid "Name"
+msgstr "名稱"
+
+#: tdefile/kacleditwidget.cpp:565
+msgid ""
+"_: read permission\n"
+"r"
+msgstr "r"
+
+#: tdefile/kacleditwidget.cpp:566
+msgid ""
+"_: write permission\n"
+"w"
+msgstr "w"
+
+#: tdefile/kacleditwidget.cpp:567
+msgid ""
+"_: execute permission\n"
+"x"
+msgstr "x"
+
+#: tdefile/kacleditwidget.cpp:568
+msgid "Effective"
+msgstr "有效"
+
+#: tdefile/kcustommenueditor.cpp:88
+msgid "Menu Editor"
+msgstr "選單編輯器"
+
+#: tdefile/kcustommenueditor.cpp:94 tdefile/tdediroperator.cpp:1258
+msgid "Menu"
+msgstr "選單"
+
+#: tdefile/kcustommenueditor.cpp:98
+msgid "New..."
+msgstr "新增..."
+
+#: tdefile/kcustommenueditor.cpp:100
+msgid "Move Up"
+msgstr "向上移動"
+
+#: tdefile/kcustommenueditor.cpp:101
+msgid "Move Down"
+msgstr "向下移動"
+
+#: tdefile/kdirselectdialog.cpp:90
+msgid "Select Folder"
+msgstr "選擇資料夾"
+
+#: tdefile/kdirselectdialog.cpp:92 tdefile/kdirselectdialog.cpp:125
+#: tdefile/tdediroperator.cpp:1269
+msgid "New Folder..."
+msgstr "新增資料夾..."
+
+#: tdefile/kdirselectdialog.cpp:109
+msgid "Folders"
+msgstr "資料夾"
+
+#: tdefile/kdirselectdialog.cpp:128
+msgid "Show Hidden Folders"
+msgstr "顯示隱藏的資料夾"
+
+#: tdefile/kdirselectdialog.cpp:407 tdefile/kdirselectdialog.cpp:411
+#: tdefile/tdediroperator.cpp:389 tdefile/tdediroperator.cpp:393
+msgid "New Folder"
+msgstr "新資料夾"
+
+#: tdefile/kdirselectdialog.cpp:412 tdefile/tdediroperator.cpp:394
+#, c-format
+msgid ""
+"Create new folder in:\n"
 "%1"
 msgstr ""
-"不正確的 URL\n"
+"建立新資料夾於：\n"
 "%1"
 
-#: tdeio/paste.cpp:299
+#: tdefile/kdirselectdialog.cpp:435 tdefile/tdediroperator.cpp:422
+msgid "A file or folder named %1 already exists."
+msgstr "名為 %1 的檔案或資料夾已經存在。"
+
+#: tdefile/kdirselectdialog.cpp:439 tdefile/tdediroperator.cpp:426
+msgid "You do not have permission to create that folder."
+msgstr "您沒有權限建立該資料夾。"
+
+#: tdefile/kencodingfiledialog.cpp:101 tdefile/kencodingfiledialog.cpp:120
+#: tdefile/kencodingfiledialog.cpp:135 tdefile/kencodingfiledialog.cpp:153
+#: tdefile/kicondialog.cpp:592 tdefile/kurlrequesterdlg.cpp:112
+#: tdefile/tdefiledialog.cpp:1334 tdefile/tdefiledialog.cpp:1358
+#: tdefile/tdefiledialog.cpp:1374 tdefile/tdefiledialog.cpp:1388
+#: tdefile/tdefiledialog.cpp:1404 tdefile/tdefiledialog.cpp:1444
+#, fuzzy
+msgid "Open"
+msgstr "開啟(&O)"
+
+#: tdefile/kencodingfiledialog.cpp:174 tdefile/kencodingfiledialog.cpp:197
+#: tdefile/tdefiledialog.cpp:1612 tdefile/tdefiledialog.cpp:1641
+#: tdefile/tdefiledialog.cpp:1660
+msgid "Save As"
+msgstr ""
+
+#: tdefile/kicondialog.cpp:241 tdefile/kicondialog.cpp:250
+msgid "Select Icon"
+msgstr "選擇圖示"
+
+#: tdefile/kicondialog.cpp:270
+msgid "Icon Source"
+msgstr "圖示來源"
+
+#: tdefile/kicondialog.cpp:276
+msgid "S&ystem icons:"
+msgstr "系統圖示(&Y):"
+
+#: tdefile/kicondialog.cpp:281
+msgid "O&ther icons:"
+msgstr "其他圖示(&T)："
+
+#: tdefile/kpropertiesdesktopbase.ui:213 tdefile/kicondialog.cpp:283
+#: tdefile/kpropertiesdialog.cpp:3715
+#, no-c-format
+msgid "&Browse..."
+msgstr "瀏覽(&B)..."
+
+#: tdefile/kicondialog.cpp:293
+msgid "Clear Search"
+msgstr "清除搜尋"
+
+#: tdefile/kicondialog.cpp:297
+msgid "&Search:"
+msgstr "搜尋(&S):"
+
+#: tdefile/kicondialog.cpp:308
+msgid "Search interactively for icon names (e.g. folder)."
+msgstr "互動式搜尋圖示名稱（例如資料夾）。"
+
+#: tdefile/knotifywidgetbase.ui:204 tdefile/kicondialog.cpp:330
+#, no-c-format
+msgid "Actions"
+msgstr "動作"
+
+#: tdefile/kicondialog.cpp:331
+msgid "Animations"
+msgstr "動畫"
+
+#: tdefile/kicondialog.cpp:332 tdefile/kopenwith.cpp:298
+msgid "Applications"
+msgstr "應用程式"
+
+#: tdefile/kicondialog.cpp:333
+msgid "Categories"
+msgstr "類別"
+
+#: tdefile/kicondialog.cpp:334
+msgid "Devices"
+msgstr "裝置"
+
+#: tdefile/kicondialog.cpp:335
+msgid "Emblems"
+msgstr "符號"
+
+#: tdefile/kicondialog.cpp:336
+msgid "Emotes"
+msgstr "表情"
+
+#: tdefile/kicondialog.cpp:337
+msgid "Filesystems"
+msgstr "檔案系統"
+
+#: tdefile/kicondialog.cpp:338
+msgid "International"
+msgstr "國際"
+
+#: tdefile/kicondialog.cpp:339
+msgid "Mimetypes"
+msgstr "MIME 類型"
+
+#: tdefile/kicondialog.cpp:340
+msgid "Places"
+msgstr "地方"
+
+#: tdefile/kicondialog.cpp:341
+msgid "Status"
+msgstr "狀態"
+
+#: tdefile/kicondialog.cpp:589
+msgid "*.png *.xpm *.svg *.svgz|Icon Files (*.png *.xpm *.svg *.svgz)"
+msgstr "*.png *.xpm *.svg *.svgz|圖示檔案 (*.png *.xpm *.svg *.svgz)"
+
+#: tdefile/kimagefilepreview.cpp:53
+msgid "&Automatic preview"
+msgstr "自動預覽(&A)"
+
+#: tdefile/kimagefilepreview.cpp:58
+msgid "&Preview"
+msgstr "預覽(&P)"
+
+#: tdefile/kmetaprops.cpp:130
+msgid "&Meta Info"
+msgstr "中繼資訊(&M)"
+
+#: tdefile/knotifydialog.cpp:81
+msgid "Sounds"
+msgstr "聲音"
+
+#: tdefile/knotifydialog.cpp:82
+msgid "Logging"
+msgstr "記錄"
+
+#: tdefile/knotifydialog.cpp:83
+msgid "Program Execution"
+msgstr "程式執行"
+
+#: tdefile/knotifydialog.cpp:84
+msgid "Message Windows"
+msgstr "訊息視窗"
+
+#: tdefile/knotifydialog.cpp:85
+msgid "Passive Windows"
+msgstr "被動視窗"
+
+#: tdefile/knotifydialog.cpp:86
+msgid "Standard Error Output"
+msgstr "標準錯誤輸出"
+
+#: tdefile/knotifydialog.cpp:87
+msgid "Taskbar"
+msgstr "工作列"
+
+#: tdefile/knotifydialog.cpp:121
+msgid "Execute a program"
+msgstr "執行程式"
+
+#: tdefile/knotifydialog.cpp:122
+msgid "Print to Standard error output"
+msgstr "列印訊息到標準錯誤輸出"
+
+#: tdefile/knotifydialog.cpp:123
+msgid "Display a messagebox"
+msgstr "顯示訊息方塊"
+
+#: tdefile/knotifydialog.cpp:124
+msgid "Log to a file"
+msgstr "記錄到檔案"
+
+#: tdefile/knotifydialog.cpp:125
+msgid "Play a sound"
+msgstr "播放音效"
+
+#: tdefile/knotifydialog.cpp:126
+msgid "Flash the taskbar entry"
+msgstr "更新工作列項目"
+
+#: tdefile/knotifydialog.cpp:163
+msgid "Notification Settings"
+msgstr "通知設定"
+
+#: tdefile/knotifydialog.cpp:309
+msgid ""
+"<qt>You may use the following macros<br>in the commandline:<br><b>%e</b>: "
+"for the event name,<br><b>%a</b>: for the name of the application that sent "
+"the event,<br><b>%s</b>: for the notification message,<br><b>%w</b>: for the "
+"numeric window ID where the event originated,<br><b>%i</b>: for the numeric "
+"event ID."
+msgstr ""
+"<qt>您可以將下列巨集<br>用在命令列中：<br><b>%e</b>：為事件名稱，<br><b>%a</"
+"b>：為送出該事件的應用程式名稱，<br><b>%s</b>：為通知訊息，<br><b>%w</b>：為"
+"事件出現的視窗數字 ID ，<br><b>%i</b>：為數字式的事件 ID。"
+
+#: tdefile/knotifydialog.cpp:339
+msgid "Advanced <<"
+msgstr "進階 <<"
+
+#: tdefile/knotifydialog.cpp:340
+msgid "Hide advanced options"
+msgstr "隱藏進階選項"
+
+#: tdefile/knotifydialog.cpp:356
+msgid "Advanced >>"
+msgstr "進階 >>"
+
+#: tdefile/knotifydialog.cpp:357
+msgid "Show advanced options"
+msgstr "顯示進階選項"
+
+#: tdefile/knotifydialog.cpp:782
+msgid "This will cause the notifications to be reset to their defaults."
+msgstr "這樣將導致通知被重設為預設值。"
+
+#: tdefile/knotifydialog.cpp:784
+msgid "Are You Sure?"
+msgstr "您確定嗎？"
+
+#: tdefile/knotifydialog.cpp:785
+msgid "&Reset"
+msgstr "重設(&R)"
+
+#: tdefile/knotifydialog.cpp:858
+msgid "Select Sound File"
+msgstr "選擇聲音檔"
+
+#: tdefile/knotifydialog.cpp:894
+msgid "Select Log File"
+msgstr "選擇記錄檔"
+
+#: tdefile/knotifydialog.cpp:908
+msgid "Select File to Execute"
+msgstr "選擇要執行的檔案"
+
+#: tdefile/knotifydialog.cpp:942
+msgid "The specified file does not exist."
+msgstr "指定的檔案可能不存在。"
+
+#: tdefile/knotifydialog.cpp:1012
+msgid "No description available"
+msgstr "沒有描述"
+
+#: tdefile/kopenwith.cpp:154
+msgid "Known Applications"
+msgstr "已知的應用程式"
+
+#: tdefile/kopenwith.cpp:324
+msgid "Open With"
+msgstr "開啟用"
+
+#: tdefile/kopenwith.cpp:328
+msgid ""
+"<qt>Select the program that should be used to open <b>%1</b>. If the program "
+"is not listed, enter the name or click the browse button.</qt>"
+msgstr ""
+"<qt>選取用來開啟 <b>%1</b> 的程式。如果程式不在清單中，請輸入程式名稱或按一下"
+"瀏覽按鈕。</qt>"
+
+#: tdefile/kopenwith.cpp:334
+msgid "Choose the name of the program with which to open the selected files."
+msgstr "選擇用來開啟選定檔案的程式名稱。"
+
+#: tdefile/kopenwith.cpp:355
 #, c-format
+msgid "Choose Application for %1"
+msgstr "為 %1 選擇應用程式"
+
+#: tdefile/kopenwith.cpp:356
 msgid ""
-"_n: &Paste File\n"
-"&Paste %n Files"
-msgstr "貼上 %n 個檔案(&P)"
+"<qt>Select the program for the file type: <b>%1</b>. If the program is not "
+"listed, enter the name or click the browse button.</qt>"
+msgstr ""
+"<qt>選取開啟檔案類型 <b>%1</b> 使用的程式。如果要使用的程式不在清單中，請輸入"
+"程式名稱或按一下瀏覽按鈕。</qt>"
 
-#: tdeio/paste.cpp:301
+#: tdefile/kopenwith.cpp:368
+msgid "Choose Application"
+msgstr "選擇應用程式"
+
+#: tdefile/kopenwith.cpp:369
+msgid ""
+"<qt>Select a program. If the program is not listed, enter the name or click "
+"the browse button.</qt>"
+msgstr ""
+"<qt>請選擇程式。如果所需程式不在清單中，請輸入程式名稱或按一下[瀏覽]按鈕。</"
+"qt>"
+
+#: tdefile/kopenwith.cpp:408
+msgid "Clear input field"
+msgstr "清除輸入區域"
+
+#: tdefile/kopenwith.cpp:438
+#, fuzzy
+msgid ""
+"Following the command, you can have several place holders which will be "
+"replaced with the actual values when the actual program is run:\n"
+"%f - a single file name\n"
+"%F - a list of files use for applications that can open several local files "
+"at once\n"
+"%u - a single URL\n"
+"%U - a list of URLs\n"
+"%d - the directory of the file to open\n"
+"%D - a list of directories\n"
+"%i - the icon\n"
+"%m - the mini-icon\n"
+"%c - the comment"
+msgstr ""
+"下列指令，你需要在實際程式執行時換上真實的數值：\n"
+"%f - 單一的檔案名稱\n"
+"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
+"%u - 單一的網址\n"
+"%U - 網址的清單\n"
+"%d - 要開啟的檔案的目錄\n"
+"%D - 目錄的清單\n"
+"%i - 圖示\n"
+"%m - 小型圖示\n"
+"%c - 註解"
+
+#: tdefile/kopenwith.cpp:471
+msgid "Run in &terminal"
+msgstr "於終端機執行(&T)"
+
+#: tdefile/kopenwith.cpp:482
+msgid "&Do not close when command exits"
+msgstr "當指令存在時不要關閉(&D)"
+
+#: tdefile/kopenwith.cpp:499
+msgid "&Remember application association for this type of file"
+msgstr "記住此類檔案的應用程式關聯(&R)"
+
+#: tdefile/kopenwith.cpp:844 tdeio/krun.cpp:221
+msgid "Open with:"
+msgstr "開啟用："
+
+#: tdefile/kpreviewprops.cpp:49
+msgid "P&review"
+msgstr "預覽(&R)"
+
+#: tdefile/kpropertiesdialog.cpp:177 tdefile/kpropertiesdialog.cpp:193
+#: tdefile/kpropertiesdialog.cpp:209 tdefile/kpropertiesdialog.cpp:232
+#: tdefile/kpropertiesdialog.cpp:252 tdefile/kpropertiesdialog.cpp:272
+#, c-format
+msgid "Properties for %1"
+msgstr "%1 的內容"
+
+#: tdefile/kpropertiesdialog.cpp:208
 #, c-format
 msgid ""
-"_n: &Paste URL\n"
-"&Paste %n URLs"
-msgstr "貼上 %n 個網址(&P)"
+"_n: <never used>\n"
+"Properties for %n Selected Items"
+msgstr "%n 個選取項目的屬性"
 
-#: tdeio/paste.cpp:303
-msgid "&Paste Clipboard Contents"
-msgstr "貼上剪貼簿內容(&P)"
+#: tdefile/kpropertiesdialog.cpp:748
+msgid "&General"
+msgstr "一般(&G)"
 
-#: tdeio/kscan.cpp:52
-msgid "Acquire Image"
-msgstr "擷取影像"
+#: tdefile/kpropertiesdialog.cpp:951 tdeio/tdefileitem.cpp:949
+msgid "Type:"
+msgstr "類型："
 
-#: tdeio/kscan.cpp:95
-msgid "OCR Image"
-msgstr "OCR 影像"
+#: tdefile/kpropertiesdialog.cpp:968
+msgid "Create new file type"
+msgstr "建立新檔案型態"
 
-#: tdeio/kmimetype.cpp:110
-msgid "No mime types installed."
-msgstr "沒有安裝 MIME 類型。"
+#: tdefile/kpropertiesdialog.cpp:970
+msgid "Edit file type"
+msgstr "編輯檔案類型"
 
-#: tdeio/kmimetype.cpp:136
+#: tdefile/kpropertiesdialog.cpp:983
+msgid "Contents:"
+msgstr "內容："
+
+#: tdefile/kpropertiesdialog.cpp:1001 tdeio/tdefileitem.cpp:961
+msgid "Size:"
+msgstr "大小："
+
+#: tdefile/kpropertiesdialog.cpp:1025
+msgid "Calculate"
+msgstr "計算"
+
+#: tdefile/kpropertiesdialog.cpp:1026
+#, fuzzy
+msgid "Stop"
+msgstr "已停止"
+
+#: tdefile/kpropertiesdialog.cpp:1036 tdefile/kpropertiesdialog.cpp:1263
+msgid "Refresh"
+msgstr "更新"
+
+#: tdefile/kpropertiesdialog.cpp:1044
+msgid "Points to:"
+msgstr "指向："
+
+#: tdefile/kpropertiesdialog.cpp:1058
+msgid "Created:"
+msgstr "建立時間："
+
+#: tdefile/kpropertiesdialog.cpp:1069 tdeio/tdefileitem.cpp:966
+msgid "Modified:"
+msgstr "修改時間："
+
+#: tdefile/kpropertiesdialog.cpp:1080
+msgid "Accessed:"
+msgstr "存取時間："
+
+#: tdefile/kpropertiesdialog.cpp:1099
+msgid "Mounted on:"
+msgstr "掛載點:"
+
+#: tdefile/kpropertiesdialog.cpp:1106 tdefile/kpropertiesdialog.cpp:2968
+msgid "Free disk space:"
+msgstr "可用的磁碟空間："
+
+#: tdefile/kpropertiesdialog.cpp:1213 tdefile/kpropertiesdialog.cpp:1228
+#: tdefile/kpropertiesdialog.cpp:3128
+#, no-c-format
+msgid ""
+"_: Available space out of total partition size (percent used)\n"
+"%1 out of %2 (%3% used)"
+msgstr "%1/%2 (%3% 已使用)"
+
+#: tdefile/kpropertiesdialog.cpp:1239
+msgid ""
+"Calculating... %1 (%2)\n"
+"%3, %4"
+msgstr ""
+"計算中... %1 (%2)\n"
+"%3, %4"
+
+#: tdefile/kpropertiesdialog.cpp:1242 tdefile/kpropertiesdialog.cpp:1258
 #, c-format
 msgid ""
-"Could not find mime type\n"
-"%1"
+"_n: 1 file\n"
+"%n files"
+msgstr "%n 個檔案"
+
+#: tdefile/kpropertiesdialog.cpp:1243 tdefile/kpropertiesdialog.cpp:1259
+#, c-format
+msgid ""
+"_n: 1 sub-folder\n"
+"%n sub-folders"
+msgstr "%n 個子資料夾"
+
+#: tdefile/kpropertiesdialog.cpp:1272
+msgid "Calculating..."
+msgstr "計算中..."
+
+#: tdefile/kpropertiesdialog.cpp:1306
+msgid "Stopped"
+msgstr "已停止"
+
+#: tdefile/kpropertiesdialog.cpp:1347
+msgid "The new file name is empty."
+msgstr "新的檔案名稱是空的。"
+
+#: tdefile/kpropertiesdialog.cpp:1489 tdefile/kpropertiesdialog.cpp:2685
+#: tdefile/kpropertiesdialog.cpp:2701 tdefile/kpropertiesdialog.cpp:2858
+#: tdefile/kpropertiesdialog.cpp:3156 tdefile/kpropertiesdialog.cpp:3440
+#: tdefile/kpropertiesdialog.cpp:3936 tdefile/kpropertiesdialog.cpp:4179
+msgid ""
+"<qt>Could not save properties. You do not have sufficient access to write to "
+"<b>%1</b>.</qt>"
+msgstr "<qt>無法儲存內容。您沒有足夠的存取權來寫入 <b>%1</b>。</qt>"
+
+#: tdefile/kpropertiesdialog.cpp:1563 tdefile/kpropertiesdialog.cpp:1567
+#: tdefile/kpropertiesdialog.cpp:1572
+msgid "Forbidden"
+msgstr "被禁止"
+
+#: tdefile/kpropertiesdialog.cpp:1564
+msgid "Can Read"
+msgstr "可讀取"
+
+#: tdefile/kpropertiesdialog.cpp:1565
+msgid "Can Read & Write"
+msgstr "可讀取 & 寫入"
+
+#: tdefile/kpropertiesdialog.cpp:1568
+msgid "Can View Content"
+msgstr "可檢視內容"
+
+#: tdefile/kpropertiesdialog.cpp:1569
+msgid "Can View & Modify Content"
+msgstr "可以檢視 & 修改內容"
+
+#: tdefile/kpropertiesdialog.cpp:1573
+msgid "Can View Content & Read"
+msgstr "可以檢視內容 & 讀取"
+
+#: tdefile/kpropertiesdialog.cpp:1574
+msgid "Can View/Read & Modify/Write"
+msgstr "可以檢視/讀取 & 修改/寫入"
+
+#: tdefile/kpropertiesdialog.cpp:1668
+msgid "&Permissions"
+msgstr "權限(&P)"
+
+#: tdefile/kpropertiesdialog.cpp:1679 tdefile/kpropertiesdialog.cpp:1944
+msgid "Access Permissions"
+msgstr "存取權限"
+
+#: tdefile/kpropertiesdialog.cpp:1690
+msgid ""
+"_n: This file is a link and does not have permissions.\n"
+"All files are links and do not have permissions."
+msgstr "所有的檔案都是連結而沒有權限。"
+
+#: tdefile/kpropertiesdialog.cpp:1693
+msgid "Only the owner can change permissions."
+msgstr "只有擁有者可以變更權限。"
+
+#: tdefile/kpropertiesdialog.cpp:1696
+msgid "O&wner:"
+msgstr "擁有者(&W):"
+
+#: tdefile/kpropertiesdialog.cpp:1702
+msgid "Specifies the actions that the owner is allowed to do."
+msgstr "指定擁有者被允許進行的動作。"
+
+#: tdefile/kpropertiesdialog.cpp:1704
+msgid "Gro&up:"
+msgstr "群組(&U):"
+
+#: tdefile/kpropertiesdialog.cpp:1710
+msgid "Specifies the actions that the members of the group are allowed to do."
+msgstr "指定群組的成員被允許進行的動作。"
+
+#: tdefile/kpropertiesdialog.cpp:1712
+msgid "O&thers:"
+msgstr "其他(&T):"
+
+#: tdefile/kpropertiesdialog.cpp:1718
+msgid ""
+"Specifies the actions that all users, who are neither owner nor in the "
+"group, are allowed to do."
+msgstr "指定所有既非擁有者也不在群組中的使用者被允許進行的動作。"
+
+#: tdefile/kpropertiesdialog.cpp:1723
+msgid "Only own&er can rename and delete folder content"
+msgstr "只有擁有者可以重新命名與刪除資料夾內容(&E)"
+
+#: tdefile/kpropertiesdialog.cpp:1724
+msgid "Is &executable"
+msgstr "是可執行檔(&E)"
+
+#: tdefile/kpropertiesdialog.cpp:1728
+msgid ""
+"Enable this option to allow only the folder's owner to delete or rename the "
+"contained files and folders. Other users can only add new files, which "
+"requires the 'Modify Content' permission."
 msgstr ""
-"找不到 MIME 類型\n"
-"%1"
+"啟用此選項將指允許資料夾的擁有者可以刪除或重新命名包含的檔案與資料夾。其他的"
+"使用者只能加入新的檔案，但必須具有「編輯內容」的權限。"
 
-#: tdeio/kmimetype.cpp:794
-msgid "The desktop entry file %1 has no Type=... entry."
-msgstr "桌面項目檔案 %1 中沒有 Type=... 項目。"
+#: tdefile/kpropertiesdialog.cpp:1732
+msgid ""
+"Enable this option to mark the file as executable. This only makes sense for "
+"programs and scripts. It is required when you want to execute them."
+msgstr ""
+"啟用此選項會將檔案標示為可執行。這只對程式與命令稿有意義。當您要執行它們的時"
+"候，這是必須的。"
+
+#: tdefile/kpropertiesdialog.cpp:1739
+msgid "A&dvanced Permissions"
+msgstr "進階的權限(&D)"
+
+#: tdefile/kpropertiesdialog.cpp:1748
+msgid "Ownership"
+msgstr "擁有權"
+
+#: tdefile/kpropertiesdialog.cpp:1757
+msgid "User:"
+msgstr "使用者："
+
+#: tdefile/kpropertiesdialog.cpp:1847
+msgid "Group:"
+msgstr "群組："
+
+#: tdefile/kpropertiesdialog.cpp:1889
+msgid "Apply changes to all subfolders and their contents"
+msgstr "套用改變到所有的子資料夾和它們的內容"
 
-#: tdeio/kmimetype.cpp:815
+#: tdefile/kpropertiesdialog.cpp:1934
+msgid "Advanced Permissions"
+msgstr "進階的權限"
+
+#: tdefile/kpropertiesdialog.cpp:1953
+msgid "Class"
+msgstr "類別"
+
+#: tdefile/kpropertiesdialog.cpp:1958
 msgid ""
-"The desktop entry of type\n"
-"%1\n"
-"is unknown."
+"Show\n"
+"Entries"
 msgstr ""
-"類型 %1 中的桌面\n"
-"項目\n"
-"無法辨識。"
+"顯示\n"
+"項目"
+
+#: tdefile/kpropertiesdialog.cpp:1960
+msgid "Read"
+msgstr "讀取"
+
+#: tdefile/kpropertiesdialog.cpp:1965
+msgid "This flag allows viewing the content of the folder."
+msgstr "這個旗標允許檢視此資料夾的內容。"
 
-#: tdeio/kmimetype.cpp:829 tdeio/kmimetype.cpp:931 tdeio/kmimetype.cpp:1113
+#: tdefile/kpropertiesdialog.cpp:1967
+msgid "The Read flag allows viewing the content of the file."
+msgstr "讀取旗標允許檢視這個檔案的內容。"
+
+#: tdefile/kpropertiesdialog.cpp:1971
 msgid ""
-"The desktop entry file\n"
-"%1\n"
-"is of type FSDevice but has no Dev=... entry."
+"Write\n"
+"Entries"
 msgstr ""
-"桌面項目檔案\n"
-"%1\n"
-"為 FSDevice 類型，但沒有 Dev=... 項目。"
+"寫入\n"
+"項目"
 
-#: tdeio/kmimetype.cpp:875
+#: tdefile/kpropertiesdialog.cpp:1973
+msgid "Write"
+msgstr "寫入"
+
+#: tdefile/kpropertiesdialog.cpp:1978
+msgid ""
+"This flag allows adding, renaming and deleting of files. Note that deleting "
+"and renaming can be limited using the Sticky flag."
+msgstr ""
+"這個旗標允許加入、重新命名與刪除檔案。注意刪除與重新命名可以使用相黏旗標來限"
+"制。"
+
+#: tdefile/kpropertiesdialog.cpp:1981
+msgid "The Write flag allows modifying the content of the file."
+msgstr "寫入旗標允許修改這個檔案的內容。"
+
+#: tdefile/kpropertiesdialog.cpp:1986
+msgid ""
+"_: Enter folder\n"
+"Enter"
+msgstr "進入"
+
+#: tdefile/kpropertiesdialog.cpp:1987
+msgid "Enable this flag to allow entering the folder."
+msgstr "啟用這個旗標已允許進入此資料夾。"
+
+#: tdefile/kpropertiesdialog.cpp:1990
+msgid "Exec"
+msgstr "執行"
+
+#: tdefile/kpropertiesdialog.cpp:1991
+msgid "Enable this flag to allow executing the file as a program."
+msgstr "啟用這個旗標將允許這檔案像程式一樣執行。"
+
+#: tdefile/kpropertiesdialog.cpp:2001
+msgid "Special"
+msgstr "特殊屬性"
+
+#: tdefile/kpropertiesdialog.cpp:2005
+msgid ""
+"Special flag. Valid for the whole folder, the exact meaning of the flag can "
+"be seen in the right hand column."
+msgstr ""
+"特殊的旗標。對整個資料夾都有效，這個旗標精確的意思可以在右手邊的欄位看到。"
+
+#: tdefile/kpropertiesdialog.cpp:2008
+msgid ""
+"Special flag. The exact meaning of the flag can be seen in the right hand "
+"column."
+msgstr "特殊的旗標。這個旗標精確的意思可以在右手邊的欄位看到。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:95 tdefile/kpropertiesdialog.cpp:2012
+#, no-c-format
+msgid "User"
+msgstr "使用者"
+
+#: tdefile/kpropertiesdialog.cpp:2016 tdefile/tdefiledetailview.cpp:71
+msgid "Group"
+msgstr "群組"
+
+#: tdefile/kpropertiesdialog.cpp:2024
+msgid "Set UID"
+msgstr "SUID"
+
+#: tdefile/kpropertiesdialog.cpp:2028
+msgid ""
+"If this flag is set, the owner of this folder will be the owner of all new "
+"files."
+msgstr "如果設定這個旗標，此資料夾的擁有者將會成為所有新檔案的擁有者。"
+
+#: tdefile/kpropertiesdialog.cpp:2031
+msgid ""
+"If this file is an executable and the flag is set, it will be executed with "
+"the permissions of the owner."
+msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以擁有者的權限執行。"
+
+#: tdefile/kpropertiesdialog.cpp:2035
+msgid "Set GID"
+msgstr "SGID"
+
+#: tdefile/kpropertiesdialog.cpp:2039
+msgid ""
+"If this flag is set, the group of this folder will be set for all new files."
+msgstr "如果設定這個旗標，此資料夾的群組將會設定到所有新檔案。"
+
+#: tdefile/kpropertiesdialog.cpp:2042
+msgid ""
+"If this file is an executable and the flag is set, it will be executed with "
+"the permissions of the group."
+msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以群組的權限執行。"
+
+#: tdefile/kpropertiesdialog.cpp:2046
+msgid ""
+"_: File permission\n"
+"Sticky"
+msgstr "相黏"
+
+#: tdefile/kpropertiesdialog.cpp:2050
+msgid ""
+"If the Sticky flag is set on a folder, only the owner and root can delete or "
+"rename files. Otherwise everybody with write permissions can do this."
+msgstr ""
+"如果在資料夾上設定相黏旗標，只有擁有者和 root 可以刪除或重新命名檔案。否則任"
+"何具有寫入權限的人都可以進行此項動作。"
+
+#: tdefile/kpropertiesdialog.cpp:2054
+msgid ""
+"The Sticky flag on a file is ignored on Linux, but may be used on some "
+"systems"
+msgstr "在檔案上的相黏旗標會被 Linux 忽略，但是可能會被某些系統使用"
+
+#: tdefile/kpropertiesdialog.cpp:2241
+msgid "Link"
+msgstr "連結"
+
+#: tdefile/kpropertiesdialog.cpp:2257
+msgid "Varying (No Change)"
+msgstr "變化（沒有改變）"
+
+#: tdefile/kpropertiesdialog.cpp:2356
+msgid ""
+"_n: This file uses advanced permissions\n"
+"These files use advanced permissions."
+msgstr "這些檔案使用進階的權限。"
+
+#: tdefile/kpropertiesdialog.cpp:2377
+msgid ""
+"_n: This folder uses advanced permissions.\n"
+"These folders use advanced permissions."
+msgstr "這些資料夾使用進階的權限。"
+
+#: tdefile/kpropertiesdialog.cpp:2392
+msgid "These files use advanced permissions."
+msgstr "這些檔案使用進階的權限。"
+
+#: tdefile/kpropertiesdialog.cpp:2608
+msgid "U&RL"
+msgstr "URL(&R)"
+
+#: tdefile/kpropertiesdialog.cpp:2745
+msgid "A&ssociation"
+msgstr "關聯(&S)"
+
+#: tdefile/kpropertiesdialog.cpp:2754
+#, fuzzy
+msgid "Pattern ( example: *.html*.htm )"
+msgstr "型樣 ( 範例: *.html;*.htm )"
+
+#: tdefile/kpropertiesdialog.cpp:2766 tdeio/kmimetypechooser.cpp:75
+msgid "Mime Type"
+msgstr "MIME 類型"
+
+#: tdefile/kpropertiesdialog.cpp:2777 tdeio/kmimetypechooser.cpp:80
+msgid "Comment"
+msgstr "備註"
+
+#: tdefile/kpropertiesdialog.cpp:2787
+msgid "Left click previews"
+msgstr "按左鍵預覽"
+
+#: tdefile/kpropertiesdialog.cpp:2906
+msgid "De&vice"
+msgstr "裝置(&V)"
+
+#: tdefile/kpropertiesdialog.cpp:2936
+msgid "Device (/dev/fd0):"
+msgstr "裝置 (/dev/fd0)："
+
+#: tdefile/kpropertiesdialog.cpp:2937
+msgid "Device:"
+msgstr "裝置："
+
+#: tdefile/kpropertiesdialog.cpp:2947
+msgid "Read only"
+msgstr "唯讀"
+
+#: tdefile/kpropertiesdialog.cpp:2951
+msgid "File system:"
+msgstr "檔案系統:"
+
+#: tdefile/kpropertiesdialog.cpp:2959
+msgid "Mount point (/mnt/floppy):"
+msgstr "裝載點 (/mnt/floppy)："
+
+#: tdefile/kpropertiesdialog.cpp:2960
+msgid "Mount point:"
+msgstr "裝載點："
+
+#: tdefile/kpropertiesdialog.cpp:2991
+msgid "Unmounted Icon"
+msgstr "已卸載裝置圖示"
+
+#: tdefile/kpropertiesdialog.cpp:3188 tdefile/kpropertiesdialog.cpp:3996
+msgid "&Application"
+msgstr "應用程式(&A)"
+
+#: tdefile/kpropertiesdialog.cpp:3313
+#, c-format
+msgid "Add File Type for %1"
+msgstr "加入 %1 的檔案類型"
+
+#: tdefile/kpropertiesdialog.cpp:3317 tdefile/kpropertiesdialog.cpp:3318
+msgid ""
+"Add the selected file types to\n"
+"the list of supported file types."
+msgstr ""
+"將選擇的檔案類型加入到\n"
+"支援的檔案類型列表。"
+
+#: tdefile/kpropertiesdialog.cpp:3512 tdefile/kpropertiesdialog.cpp:3968
+msgid "Only executables on local file systems are supported."
+msgstr "只支援本地檔案系統的執行檔。"
+
+#: tdefile/kpropertiesdialog.cpp:3524
+#, c-format
+msgid "Advanced Options for %1"
+msgstr "%1 的進階選項"
+
+#: tdefile/kpropertiesdialog.cpp:3683
+msgid "E&xecute"
+msgstr "執行(&X)"
+
+#: tdefile/kpropertiesdialog.cpp:3690
+msgid "Comman&d:"
+msgstr "命令(&D)："
+
+#: tdefile/kpropertiesdialog.cpp:3699
+#, fuzzy
+msgid ""
+"Following the command, you can have several place holders which will be "
+"replaced with the actual values when the actual program is run:\n"
+"%f - a single file name\n"
+"%F - a list of files use for applications that can open several local files "
+"at once\n"
+"%u - a single URL\n"
+"%U - a list of URLs\n"
+"%d - the folder of the file to open\n"
+"%D - a list of folders\n"
+"%i - the icon\n"
+"%m - the mini-icon\n"
+"%c - the caption"
+msgstr ""
+"下列指令，你需要在實際程式執行時換上真實的數值：\n"
+"%f - 單一的檔案名稱\n"
+"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
+"%u - 單一的網址\n"
+"%U - 網址的清單\n"
+"%d - 要開啟的檔案的目錄\n"
+"%D - 目錄的清單\n"
+"%i - 圖示\n"
+"%m - 小型圖示\n"
+"%c - 說明"
+
+#: tdefile/kpropertiesdialog.cpp:3720
+msgid "Panel Embedding"
+msgstr "嵌入面板"
+
+#: tdefile/kpropertiesdialog.cpp:3729
+msgid "&Execute on click:"
+msgstr "按下後執行(&E)："
+
+#: tdefile/kpropertiesdialog.cpp:3737
+msgid "&Window title:"
+msgstr "視窗標題(&W)："
+
+#: tdefile/kpropertiesdesktopadvbase.ui:55 tdefile/kpropertiesdialog.cpp:3757
+#, no-c-format
+msgid "&Run in terminal"
+msgstr "在終端機執行(&R)"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:77 tdefile/kpropertiesdialog.cpp:3772
+#, no-c-format
+msgid "Do not &close when command exits"
+msgstr "當指令結束時不要關閉(&C)"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:66 tdefile/kpropertiesdialog.cpp:3776
+#, no-c-format
+msgid "&Terminal options:"
+msgstr "終端機選項(&T)："
+
+#: tdefile/kpropertiesdesktopadvbase.ui:106 tdefile/kpropertiesdialog.cpp:3796
+#, no-c-format
+msgid "Ru&n as a different user"
+msgstr "以不同使用者身份執行(&N)"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:134 tdefile/kpropertiesdialog.cpp:3799
+#: tdeio/passdlg.cpp:108
+#, no-c-format
+msgid "&Username:"
+msgstr "使用者名稱(&U):"
+
+#: tdefile/kpropertiesdialog.cpp:4037
+msgid "Description:"
+msgstr "描述："
+
+#: tdefile/kpropertiesdialog.cpp:4043
+msgid "Comment:"
+msgstr "備註："
+
+#: tdefile/kpropertiesdialog.cpp:4049
+msgid "File types:"
+msgstr "檔案類型："
+
+#: tdefile/kurlbar.cpp:352
+msgid ""
+"<qt>The <b>Quick Access</b> panel provides easy access to commonly used file "
+"locations.<p>Clicking on one of the shortcut entries will take you to that "
+"location.<p>By right clicking on an entry you can add, edit and remove "
+"shortcuts.</qt>"
+msgstr ""
+"<qt><b>快速存取</b>面板提供對常使用檔案位置的簡易存取方式。<p>按下捷徑項目之"
+"一會把您帶到該位置。<p>在項目上按右鍵則可以加入、編輯和移除捷徑。</qt>"
+
+#: tdefile/kurlbar.cpp:620
+#, fuzzy
+msgid "Desktop Search"
+msgstr "桌面"
+
+#: tdefile/kurlbar.cpp:745
+msgid "&Large Icons"
+msgstr "大圖示(&L)"
+
+#: tdefile/kurlbar.cpp:745
+msgid "&Small Icons"
+msgstr "小圖示(&S)"
+
+#: tdefile/kurlbar.cpp:751
+msgid "&Edit Entry..."
+msgstr "編輯項目(&E)..."
+
+#: tdefile/kurlbar.cpp:755
+msgid "&Add Entry..."
+msgstr "新增項目(&A)..."
+
+#: tdefile/kurlbar.cpp:759
+msgid "&Remove Entry"
+msgstr "移除項目(&R)"
+
+#: tdefile/kurlbar.cpp:791
+msgid "Enter a description"
+msgstr "輸入描述"
+
+#: tdefile/kurlbar.cpp:937
+msgid "Edit Quick Access Entry"
+msgstr "編輯快速存取項目"
+
+#: tdefile/kurlbar.cpp:940
+msgid ""
+"<qt><b>Please provide a description, URL and icon for this Quick Access "
+"entry.</b></br></qt>"
+msgstr "<qt><b>請為此快速存取項目提供描述、URL 和圖示。</b</br></qt>"
+
+#: tdefile/kurlbar.cpp:947
+msgid ""
+"<qt>This is the text that will appear in the Quick Access panel.<p>The "
+"description should consist of one or two words that will help you remember "
+"what this entry refers to.</qt>"
+msgstr ""
+"<qt>這是會顯示在快速存取面板中的文字。<p>此描述應該是一或兩個字的組合以協助您"
+"記得這個項目參考到何處。</qt>"
+
+#: tdefile/kpropertiesdesktopbase.ui:125 tdefile/kurlbar.cpp:950
+#, no-c-format
+msgid "&Description:"
+msgstr "描述(&D)："
+
+#: tdefile/kurlbar.cpp:957
+#, fuzzy
+msgid ""
+"<qt>This is the location associated with the entry. Any valid URL may be "
+"used. For example:<p>%1<br>http://www.trinitydesktop.org<p>By clicking on "
+"the button next to the text edit box you can browse to an appropriate URL.</"
+"qt>"
+msgstr ""
+"<qt>這是此項目所關聯的位置。可以使用任何有效的網址。例如：<p>%1<br>http://"
+"www.kde.org<br>ftp://ftp.kde.org/pub/kde/stable<p>按下文字編輯方塊旁邊的按鈕"
+"可以讓您瀏覽合適的網址。</qt>"
+
+#: tdefile/kurlbar.cpp:961
+msgid "&URL:"
+msgstr "URL(&U):"
+
+#: tdefile/kurlbar.cpp:968
+msgid ""
+"<qt>This is the icon that will appear in the Quick Access panel.<p>Click on "
+"the button to select a different icon.</qt>"
+msgstr ""
+"<qt>這是會顯示在快速存取面板中的圖示。<p>按下按鈕以選擇不同的圖示。</qt>"
+
+#: tdefile/kurlbar.cpp:970
+msgid "Choose an &icon:"
+msgstr "選擇圖示(&I)："
+
+#: tdefile/kurlbar.cpp:986
+msgid "&Only show when using this application (%1)"
+msgstr "只在使用這個應用程式 (%1) 時顯示(&O)"
+
+#: tdefile/kurlbar.cpp:989
+msgid ""
+"<qt>Select this setting if you want this entry to show only when using the "
+"current application (%1).<p>If this setting is not selected, the entry will "
+"be available in all applications.</qt>"
+msgstr ""
+"<qt>如果您希望這個項目只在使用目前的應用程式 (%1) 時顯示，請選擇此設定。\n"
+"<p>如果沒有選取這項設定，該項目將在所有應用程式中顯示。</qt>"
+
+#: tdefile/kurlrequester.cpp:213
+msgid "Open file dialog"
+msgstr "開啟檔案對話方塊"
+
+#: tdefile/tdediroperator.cpp:448
+msgid "You did not select a file to delete."
+msgstr "您尚未選擇要刪除的檔案。"
+
+#: tdefile/tdediroperator.cpp:449
+msgid "Nothing to Delete"
+msgstr "沒有任何要刪除的東西"
+
+#: tdefile/tdediroperator.cpp:471
+msgid ""
+"<qt>Do you really want to delete\n"
+" <b>'%1'</b>?</qt>"
+msgstr ""
+"<qt>您真的要刪除\n"
+"<b>「%1」</b>？</qt>"
+
+#: tdefile/tdediroperator.cpp:473
+msgid "Delete File"
+msgstr "刪除檔案"
+
+#: tdefile/tdediroperator.cpp:478
+#, c-format
+msgid ""
+"_n: Do you really want to delete this item?\n"
+"Do you really want to delete these %n items?"
+msgstr "您真的要刪除這 %n 個項目嗎？"
+
+#: tdefile/tdediroperator.cpp:480
+msgid "Delete Files"
+msgstr "刪除檔案"
+
+#: tdefile/tdediroperator.cpp:511
+msgid "You did not select a file to trash."
+msgstr "您尚未選擇要丟到資源回收桶的檔案。"
+
+#: tdefile/tdediroperator.cpp:512
+msgid "Nothing to Trash"
+msgstr "沒有要丟到資源回收桶的東西"
+
+#: tdefile/tdediroperator.cpp:534
+msgid ""
+"<qt>Do you really want to trash\n"
+" <b>'%1'</b>?</qt>"
+msgstr ""
+"<qt>您真的要把\n"
+"<b>「%1」</b>丟到資源回收桶？</qt>"
+
+#: tdefile/tdediroperator.cpp:536
+msgid "Trash File"
+msgstr "資源回收桶檔案"
+
+#: tdefile/tdediroperator.cpp:537 tdefile/tdediroperator.cpp:544
+msgid ""
+"_: to trash\n"
+"&Trash"
+msgstr "資源回收桶(&T)"
+
+#: tdefile/tdediroperator.cpp:541
+#, c-format
+msgid ""
+"_n: translators: not called for n == 1\n"
+"Do you really want to trash these %n items?"
+msgstr "您真的要把這 %n 個項目丟到資源回收桶嗎？"
+
+#: tdefile/tdediroperator.cpp:543
+msgid "Trash Files"
+msgstr "資源回收桶檔案"
+
+#: tdefile/tdediroperator.cpp:658 tdefile/tdediroperator.cpp:726
+msgid "The specified folder does not exist or was not readable."
+msgstr "指定的資料夾不存在或無法讀取。"
+
+#: tdefile/tdediroperator.cpp:920 tdefile/tdediroperator.cpp:1321
+#: tdefile/tdefiledetailview.cpp:64
+msgid "Detailed View"
+msgstr "詳細檢視"
+
+#: tdefile/tdediroperator.cpp:925 tdefile/tdediroperator.cpp:1319
+msgid "Short View"
+msgstr "簡短檢視"
+
+#: tdefile/tdediroperator.cpp:1260
+msgid "Parent Folder"
+msgstr "上層資料夾"
+
+#: tdefile/tdediroperator.cpp:1264 tdefile/tdefilespeedbar.cpp:60
+msgid "Home Folder"
+msgstr "家資料夾"
+
+#: tdefile/tdediroperator.cpp:1271
+msgid "Move to Trash"
+msgstr "移至資源回收桶"
+
+#: tdefile/tdediroperator.cpp:1274
+#, fuzzy
+msgid "Delete"
+msgstr "刪除中"
+
+#: tdefile/tdediroperator.cpp:1277
+#, fuzzy
+msgid "Reload"
+msgstr "上傳"
+
+#: tdefile/tdediroperator.cpp:1282
+msgid "Sorting"
+msgstr "排序中"
+
+#: tdefile/tdediroperator.cpp:1283
+msgid "By Name"
+msgstr "依名稱"
+
+#: tdefile/tdediroperator.cpp:1286
+msgid "By Date"
+msgstr "依日期"
+
+#: tdefile/tdediroperator.cpp:1289
+msgid "By Size"
+msgstr "依大小"
+
+#: tdefile/tdediroperator.cpp:1292
+msgid "Reverse"
+msgstr "反轉"
+
+#: tdefile/tdediroperator.cpp:1302
+msgid "Folders First"
+msgstr "資料夾在前"
+
+#: tdefile/tdediroperator.cpp:1304
+msgid "Case Insensitive"
+msgstr "不區分大小寫"
+
+#: tdefile/tdediroperator.cpp:1315
+msgid "&View"
+msgstr ""
+
+#: tdefile/tdediroperator.cpp:1324
+msgid "Show Hidden Files"
+msgstr "顯示隱藏檔案"
+
+#: tdefile/tdediroperator.cpp:1327
+msgid "Separate Folders"
+msgstr "分開資料夾"
+
+#: tdefile/tdediroperator.cpp:1331
+msgid "Show Preview"
+msgstr "顯示預覽"
+
+#: tdefile/tdediroperator.cpp:1335
+msgid "Hide Preview"
+msgstr "隱藏預覽"
+
+#: tdefile/tdefiledetailview.cpp:68
+msgid "Date"
+msgstr "日期"
+
+#: tdefile/tdefiledetailview.cpp:69
+msgid "Permissions"
+msgstr "權限"
+
+#: tdefile/tdefiledialog.cpp:351
+msgid "Please specify the filename to save to."
+msgstr "請指定要儲存的檔案名稱。"
+
+#: tdefile/tdefiledialog.cpp:353
+msgid "Please select the file to open."
+msgstr "請選擇要開啟的檔案。"
+
+#: tdefile/tdefiledialog.cpp:414 tdefile/tdefiledialog.cpp:457
+#: tdefile/tdefiledialog.cpp:1564
+msgid "You can only select local files."
+msgstr "您只能選取本地檔案。"
+
+#: tdefile/tdefiledialog.cpp:415 tdefile/tdefiledialog.cpp:458
+#: tdefile/tdefiledialog.cpp:1565
+msgid "Remote Files Not Accepted"
+msgstr "不接受遠端檔案"
+
+#: tdefile/tdefiledialog.cpp:449
 msgid ""
-"The desktop entry file\n"
 "%1\n"
-"is of type Link but has no URL=... entry."
+"does not appear to be a valid URL.\n"
 msgstr ""
-"桌面項目檔案\n"
 "%1\n"
-"為 Link 類型，但沒有 URL=... 項目。"
+"似乎不是有效的 URL。\n"
 
-#: tdeio/kmimetype.cpp:941
-msgid "Mount"
-msgstr "裝載"
+#: tdefile/tdefiledialog.cpp:449
+msgid "Invalid URL"
+msgstr "無效的 URL"
 
-#: tdeio/kmimetype.cpp:952
-msgid "Eject"
-msgstr "退出"
+#: tdefile/tdefiledialog.cpp:786
+msgid ""
+"<p>While typing in the text area, you may be presented with possible "
+"matches. This feature can be controlled by clicking with the right mouse "
+"button and selecting a preferred mode from the <b>Text Completion</b> menu."
+msgstr ""
+"<p>在文字區輸入時，您會看到可能的相符項目。這項功能可以按滑鼠右鍵從<b>文字補"
+"齊</b>選單選擇您所偏好的模式來控制。"
 
-#: tdeio/kmimetype.cpp:954
-msgid "Unmount"
-msgstr "卸載"
+#: tdefile/tdefiledialog.cpp:795
+msgid "This is the name to save the file as."
+msgstr "這是儲存檔案時所用的名稱。"
 
-#: tdeio/kmimetype.cpp:1071
+#: tdefile/tdefiledialog.cpp:800
 msgid ""
-"The desktop entry file\n"
+"This is the list of files to open. More than one file can be specified by "
+"listing several files, separated by spaces."
+msgstr "這是要開啟的檔案清單。如果想要指定多個檔案，可以用空格分隔。"
+
+#: tdefile/tdefiledialog.cpp:807
+msgid "This is the name of the file to open."
+msgstr "這是要開啟的檔案的名稱。"
+
+#: tdefile/tdefiledialog.cpp:845
+msgid "Current location"
+msgstr "目前位置"
+
+#: tdefile/tdefiledialog.cpp:846
+msgid ""
+"This is the currently listed location. The drop-down list also lists "
+"commonly used locations. This includes standard locations, such as your home "
+"folder, as well as locations that have been visited recently."
+msgstr ""
+"這裡是目前清單的位置。常常使用的位置會列在這裡。這包含了標準位置，像是您的家"
+"目錄，還有最近參訪過的位置。"
+
+#: tdefile/tdefiledialog.cpp:853
+#, c-format
+msgid "Root Folder: %1"
+msgstr "Root 資料夾： %1"
+
+#: tdefile/tdefiledialog.cpp:859
+#, c-format
+msgid "Home Folder: %1"
+msgstr "Home 資料夾： %1"
+
+#: tdefile/tdefiledialog.cpp:868
+#, c-format
+msgid "Documents: %1"
+msgstr "文件：%1"
+
+#: tdefile/tdefiledialog.cpp:875
+#, c-format
+msgid "Desktop: %1"
+msgstr "桌面：%1"
+
+#: tdefile/tdefiledialog.cpp:916
+msgid ""
+"<qt>Click this button to enter the parent folder.<p>For instance, if the "
+"current location is file:/home/%1 clicking this button will take you to "
+"file:/home.</qt>"
+msgstr ""
+"<qt>按這個按鈕來進入上一層目錄。<p>例如，如果目前位置是 file:/home/%1，按這個"
+"按鈕將把您帶到  file:/home。</qt>"
+
+#: tdefile/tdefiledialog.cpp:920
+msgid "Click this button to move backwards one step in the browsing history."
+msgstr "按這個按鈕在瀏覽歷史中向後移動一步。"
+
+#: tdefile/tdefiledialog.cpp:922
+msgid "Click this button to move forward one step in the browsing history."
+msgstr "按這個按鈕在瀏覽歷史中向前移動一步。"
+
+#: tdefile/tdefiledialog.cpp:924
+msgid "Click this button to reload the contents of the current location."
+msgstr "按這個按鈕來重新載入目前位置的內容。"
+
+#: tdefile/tdefiledialog.cpp:927
+msgid "Click this button to create a new folder."
+msgstr "按這個按鈕來建立新資料夾。"
+
+#: tdefile/tdefiledialog.cpp:930
+msgid "Show Quick Access Navigation Panel"
+msgstr "顯示快速存取導覽面板"
+
+#: tdefile/tdefiledialog.cpp:931
+msgid "Hide Quick Access Navigation Panel"
+msgstr "隱藏快速存取導覽面板"
+
+#: tdefile/tdefiledialog.cpp:936
+msgid "Show Bookmarks"
+msgstr "顯示書籤"
+
+#: tdefile/tdefiledialog.cpp:937
+msgid "Hide Bookmarks"
+msgstr "隱藏書籤"
+
+#: tdefile/tdefiledialog.cpp:941
+msgid "Configure"
+msgstr ""
+
+#: tdefile/tdefiledialog.cpp:942
+msgid ""
+"<qt>This is the configuration menu for the file dialog. Various options can "
+"be accessed from this menu including: <ul><li>how files are sorted in the "
+"list</li><li>types of view, including icon and list</li><li>showing of "
+"hidden files</li><li>the Quick Access navigation panel</li><li>file "
+"previews</li><li>separating folders from files</li></ul></qt>"
+msgstr ""
+"<qt>這是檔案對話方塊的組態設定選單。此選單中可存取的各種選項包括：<ul><li>清"
+"單中的檔案如何排序</li><li>檢視類型，包括圖示和列表</li><li>隱藏檔案的顯示</"
+"li><li>快速存取導覽面板</li><li>檔案預覽</li><li>區分檔案和目錄</li></ul></"
+"qt>"
+
+#: tdefile/tdefiledialog.cpp:998
+msgid "&Location:"
+msgstr "位置(&L)："
+
+#: tdefile/tdefiledialog.cpp:1024
+msgid ""
+"<qt>This is the filter to apply to the file list. File names that do not "
+"match the filter will not be shown.<p>You may select from one of the preset "
+"filters in the drop down menu, or you may enter a custom filter directly "
+"into the text area.<p>Wildcards such as * and ? are allowed.</qt>"
+msgstr ""
+"<qt>這是應用到檔案清單的篩選器。不符合該篩選器的檔案名稱將不會被顯示。<p>您可"
+"以從下拉選單中選擇預設的篩選器，或者直接在文字區域中輸入自訂的篩選器。<p>允許"
+"使用 * 和 ? 萬用字元。</qt>"
+
+#: tdefile/tdefiledialog.cpp:1030
+msgid "&Filter:"
+msgstr "篩選器(&F)："
+
+#: tdefile/tdefiledialog.cpp:1177
+msgid "search term"
+msgstr ""
+
+#: tdefile/tdefiledialog.cpp:1494
+msgid ""
+"The chosen filenames do not\n"
+"appear to be valid."
+msgstr ""
+"所選取的檔案名稱\n"
+"大豆豆豆得豆得豆豆都似乎無效。"
+
+#: tdefile/tdefiledialog.cpp:1496
+msgid "Invalid Filenames"
+msgstr "無效的檔名"
+
+#: tdefile/tdefiledialog.cpp:1526
+#, fuzzy
+msgid ""
+"The requested filenames\n"
 "%1\n"
-" has an invalid menu entry\n"
-"%2."
+"do not appear to be valid\n"
+"make sure every filename is enclosed in double quotes."
 msgstr ""
-"桌面項目檔案\n"
+"要求的檔案名稱\n"
 "%1\n"
-" 有一無效選單項目\n"
-"%2。"
+"似乎無效；\n"
+"請確定每個檔案名稱已用雙引號括起來。"
 
-#: tdeio/slave.cpp:370
-#, c-format
-msgid "Unable to create io-slave: %1"
-msgstr "無法建立 io-slave: %1"
+#: tdefile/tdefiledialog.cpp:1530
+msgid "Filename Error"
+msgstr "檔案名稱錯誤"
 
-#: tdeio/slave.cpp:401
-msgid "Unknown protocol '%1'."
-msgstr "不明的協定「%1」。"
+#: tdefile/tdefiledialog.cpp:1687
+msgid "*|All Folders"
+msgstr "*|所有資料夾"
 
-#: tdeio/slave.cpp:409
-msgid "Can not find io-slave for protocol '%1'."
-msgstr "找不到「%1」協定的 io-slave 程式。"
+#: tdefile/tdefiledialog.cpp:1690 tdefile/tdefilefiltercombo.cpp:32
+msgid "*|All Files"
+msgstr "*|所有檔案"
 
-#: tdeio/slave.cpp:437
-msgid "Cannot talk to tdelauncher"
-msgstr "無法與 tdelauncher 交談"
+#: tdefile/tdefiledialog.cpp:1987
+msgid "Automatically select filename e&xtension (%1)"
+msgstr "自動選擇檔案名稱延伸檔名(&X)[%1]"
 
-#: tdeio/slave.cpp:448
-#, c-format
+#: tdefile/tdefiledialog.cpp:1988
+msgid "the extension <b>%1</b>"
+msgstr "延伸檔名 <b>%1</b>"
+
+#: tdefile/tdefiledialog.cpp:1996
+msgid "Automatically select filename e&xtension"
+msgstr "自動選擇報導延伸檔名(&X)"
+
+#: tdefile/tdefiledialog.cpp:1997
+msgid "a suitable extension"
+msgstr "合適的延伸檔名"
+
+#: tdefile/tdefiledialog.cpp:2008
+msgid ""
+"This option enables some convenient features for saving files with "
+"extensions:<br><ol><li>Any extension specified in the <b>%1</b> text area "
+"will be updated if you change the file type to save in.<br><br></li><li>If "
+"no extension is specified in the <b>%2</b> text area when you click <b>Save</"
+"b>, %3 will be added to the end of the filename (if the filename does not "
+"already exist). This extension is based on the file type that you have "
+"chosen to save in.<br><br>If you do not want TDE to supply an extension for "
+"the filename, you can either turn this option off or you can suppress it by "
+"adding a period (.) to the end of the filename (the period will be "
+"automatically removed).</li></ol>If unsure, keep this option enabled as it "
+"makes your files more manageable."
+msgstr ""
+"這個選項啟用了一些儲存檔案名稱與延伸檔名的便利功能：<br><ol><li>如果您改變了"
+"要儲存的檔案類型，任何在 <b>%1</b> 文字區域指定的延伸檔名都會被更新。"
+"<br><br></li><li>當您按下<b>儲存</b>時，如果在 <b>%2</b> 文字區域中沒有指定延"
+"伸檔名，%3 會被加到檔案名稱的結尾（如果檔案名稱尚未存在）。這個延伸檔名是根據"
+"您選擇儲存的檔案類型而定。<br><br>如果你不想要 TDE 提供任何延伸檔名，您可以將"
+"此選項關閉或者您可以在檔案名稱的結尾加上句點(.)來限制它（這個句點會自動被移"
+"除）。</li></ol>如果不確定，保持啟用此選項，因為它會讓您的檔案更容易管理。"
+
+#: tdefile/tdefiledialog.cpp:2282
+msgid ""
+"<qt>This button allows you to bookmark specific locations. Click on this "
+"button to open the bookmark menu where you may add, edit or select a "
+"bookmark.<p>These bookmarks are specific to the file dialog, but otherwise "
+"operate like bookmarks elsewhere in TDE.</qt>"
+msgstr ""
+"<qt>這個按鈕可以讓您將指定位置加入書籤。按這個按鈕將打開書籤選單，其中您可以"
+"添加、編輯或選擇書籤。<p>這些書籤專用於檔案對話方塊，但是可以像 TDE 其他地方"
+"的書籤一樣操作。</qt>"
+
+#: tdefile/tdefilefiltercombo.cpp:164
+msgid "All Supported Files"
+msgstr "所有支援的檔案"
+
+#: tdefile/tdefileiconview.cpp:63
+msgid "Small Icons"
+msgstr "小圖示"
+
+#: tdefile/tdefileiconview.cpp:68
+msgid "Large Icons"
+msgstr "大圖示"
+
+#: tdefile/tdefileiconview.cpp:76
+msgid "Thumbnail Previews"
+msgstr "圖示預覽"
+
+#: tdefile/tdefileiconview.cpp:120
+msgid "Icon View"
+msgstr "圖示檢視"
+
+#: tdefile/tdefilemetainfowidget.cpp:111
+msgid "<Error>"
+msgstr "<錯誤>"
+
+#: tdefile/tdefilepreview.cpp:63
+msgid "Preview"
+msgstr "預覽"
+
+#: tdefile/tdefilepreview.cpp:69
+msgid "No preview available."
+msgstr "無法預覽。"
+
+#: tdefile/tdefilesharedlg.cpp:58
+msgid "&Share"
+msgstr "共用(&S)"
+
+#: tdefile/tdefilesharedlg.cpp:143
+msgid "Only folders in your home folder can be shared."
+msgstr "只可共用您家目錄中的資料夾。"
+
+#: tdefile/tdefilesharedlg.cpp:154
+msgid "Not shared"
+msgstr "不共用"
+
+#: tdefile/tdefilesharedlg.cpp:159
+msgid "Shared - read only for others"
+msgstr ""
+
+#: tdefile/tdefilesharedlg.cpp:164
+msgid "Shared - writeable for others"
+msgstr ""
+
+#: tdefile/tdefilesharedlg.cpp:186
 msgid ""
-"Unable to create io-slave:\n"
-"tdelauncher said: %1"
+"Sharing this folder makes it available under Linux/UNIX (NFS) and Windows "
+"(Samba)."
 msgstr ""
-"無法建立 io-slave:\n"
-"tdelauncher 回應: %1"
+"共用這個目錄，將使它可以在 Linux/UNIX (NFS) 和 Windows (Samba) 中存取。"
 
-#: tdeio/kservice.cpp:923
-msgid "Updating System Configuration"
-msgstr "更新系統組態"
+#: tdefile/tdefilesharedlg.cpp:192
+msgid "You can also reconfigure file sharing authorization."
+msgstr "您還可以重新設定檔案共用的授權。"
 
-#: tdeio/kservice.cpp:924
-msgid "Updating system configuration."
-msgstr "更新系統組態。"
+#: tdefile/tdefilesharedlg.cpp:195 tdefile/tdefilesharedlg.cpp:222
+msgid "Configure File Sharing..."
+msgstr "設定檔案共用..."
+
+#: tdefile/tdefilesharedlg.cpp:207
+msgid ""
+"Error running 'filesharelist'. Check if installed and in $PATH or /usr/sbin."
+msgstr ""
+"執行「filesharelist」出錯。請檢查該程式是否已經安裝在 $PATH 或 /usr/sbin 中。"
+
+#: tdefile/tdefilesharedlg.cpp:214
+msgid "You need to be authorized to share folders."
+msgstr "您需要獲得授權才可以共用資料夾。"
+
+#: tdefile/tdefilesharedlg.cpp:217
+msgid "File sharing is disabled."
+msgstr "檔案分享已停用。"
+
+#: tdefile/tdefilesharedlg.cpp:282
+msgid "Sharing folder '%1' failed."
+msgstr "分享資料夾「%1」失敗。"
+
+#: tdefile/tdefilesharedlg.cpp:283
+msgid ""
+"An error occurred while trying to share folder '%1'. Make sure that the Perl "
+"script 'fileshareset' is set suid root."
+msgstr ""
+"當嘗試分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設定 "
+"suid 為 root。"
+
+#: tdefile/tdefilesharedlg.cpp:288
+msgid "Unsharing folder '%1' failed."
+msgstr "取消分享資料夾「%1」失敗。"
+
+#: tdefile/tdefilesharedlg.cpp:289
+msgid ""
+"An error occurred while trying to unshare folder '%1'. Make sure that the "
+"Perl script 'fileshareset' is set suid root."
+msgstr ""
+"當嘗試取消分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設"
+"定 suid 為 root。"
+
+#: tdefile/tdefilespeedbar.cpp:49
+msgid "Desktop"
+msgstr "桌面"
+
+#: tdefile/tdefilespeedbar.cpp:56
+msgid "Documents"
+msgstr "文件"
+
+#: tdefile/tdefilespeedbar.cpp:65
+msgid "Storage Media"
+msgstr "儲存媒體"
+
+#: tdefile/tdefilespeedbar.cpp:100
+msgid "Downloads"
+msgstr ""
+
+#: tdefile/tdefilespeedbar.cpp:102
+msgid "Music"
+msgstr ""
+
+#: tdefile/tdefilespeedbar.cpp:104
+#, fuzzy
+msgid "Pictures"
+msgstr "所有圖片"
+
+#: tdefile/tdefilespeedbar.cpp:106
+msgid "Videos"
+msgstr ""
+
+#: tdefile/tdefilespeedbar.cpp:108
+msgid "Templates"
+msgstr ""
+
+#: tdefile/tdefilespeedbar.cpp:110
+#, fuzzy
+msgid "Public"
+msgstr "公開金鑰:"
+
+#: tdefile/tdefilespeedbar.cpp:115
+msgid "Network Folders"
+msgstr "網路資料夾"
+
+#: tdefile/tdefileview.cpp:77
+msgid "Unknown View"
+msgstr "無法識別的檢視"
+
+#: tdeio/chmodjob.cpp:173
+msgid ""
+"<qt>Could not modify the ownership of file <b>%1</b>. You have insufficient "
+"access to the file to perform the change.</qt>"
+msgstr ""
+"<qt>無法更改檔案 <b>%1</b> 的擁有權。您沒有足夠的檔案存取權來做這個改變。</"
+"qt>"
+
+#: tdeio/chmodjob.cpp:173
+msgid "&Skip File"
+msgstr "略過檔案(&S)"
 
 #: tdeio/defaultprogress.cpp:104
 msgid "Source:"
@@ -525,10 +2804,6 @@ msgstr "開啟檔案(&F)"
 msgid "Open &Destination"
 msgstr "開啟目的地(&D)："
 
-#: misc/uiserver.cpp:632 tdeio/defaultprogress.cpp:179
-msgid "Progress Dialog"
-msgstr "進度對話方塊"
-
 #: tdeio/defaultprogress.cpp:226
 #, no-c-format
 msgid ""
@@ -593,10 +2868,6 @@ msgid ""
 "%1 / %n files"
 msgstr "%1 / %n 個檔案"
 
-#: misc/uiserver.cpp:288 tdeio/defaultprogress.cpp:325
-msgid "Stalled"
-msgstr "暫停"
-
 #: tdeio/defaultprogress.cpp:327
 msgid "%1/s ( %2 remaining )"
 msgstr "%1/s ( 剩下 %2 )"
@@ -630,10 +2901,6 @@ msgstr "測試檔案進度"
 msgid "Mounting %1"
 msgstr "裝載 %1 中"
 
-#: misc/uiserver.cpp:378 tdeio/defaultprogress.cpp:410
-msgid "Unmounting"
-msgstr "卸載中"
-
 #: tdeio/defaultprogress.cpp:418
 #, c-format
 msgid "Resuming from %1"
@@ -647,42 +2914,6 @@ msgstr "不可恢復"
 msgid "%1/s (done)"
 msgstr "%1/s (完成)"
 
-#: tdeio/pastedialog.cpp:49
-msgid "Data format:"
-msgstr "資料格式:"
-
-#: tdeio/netaccess.cpp:67
-msgid "File '%1' is not readable"
-msgstr "檔案「%1」無法讀取"
-
-#: tdeio/netaccess.cpp:461
-msgid "ERROR: Unknown protocol '%1'"
-msgstr "錯誤：不明的協定「%1」。"
-
-#: tdeio/passdlg.cpp:57
-msgid "Password"
-msgstr "密碼"
-
-#: tdeio/passdlg.cpp:98
-msgid "You need to supply a username and a password"
-msgstr "您需要提供一組使用者名稱和密碼"
-
-#: tdefile/kpropertiesdialog.cpp:3799 tdeio/passdlg.cpp:108
-msgid "&Username:"
-msgstr "使用者名稱(&U):"
-
-#: tdeio/passdlg.cpp:125
-msgid "&Password:"
-msgstr "密碼(&P)："
-
-#: tdeio/passdlg.cpp:147
-msgid "&Keep password"
-msgstr "保存密碼(&K)"
-
-#: kpasswdserver/kpasswdserver.cpp:371 tdeio/passdlg.cpp:345
-msgid "Authorization Dialog"
-msgstr "授權對話方塊"
-
 #: tdeio/global.cpp:48 tdeio/global.cpp:81
 msgid "%1 B"
 msgstr "%1 B"
@@ -1222,7 +3453,8 @@ msgstr "<p><b>可能的解決方法</b>：</p><ul><li>"
 msgid ""
 "Contact your appropriate computer support system, whether the system "
 "administrator, or technical support group for further assistance."
-msgstr "請聯繫合適的電腦支援組織，例如系統管理員或技術支援小組，以取得進一步的協助。"
+msgstr ""
+"請聯繫合適的電腦支援組織，例如系統管理員或技術支援小組，以取得進一步的協助。"
 
 #: tdeio/global.cpp:589
 msgid "Contact the administrator of the server for further assistance."
@@ -1234,8 +3466,8 @@ msgstr "請檢查您對該資源的存取權限。"
 
 #: tdeio/global.cpp:593
 msgid ""
-"Your access permissions may be inadequate to perform the requested operation on "
-"this resource."
+"Your access permissions may be inadequate to perform the requested operation "
+"on this resource."
 msgstr "您可能沒有足夠權限來執行所要求的對該資源的作業。"
 
 #: tdeio/global.cpp:595
@@ -1245,8 +3477,8 @@ msgstr "該檔案可能正在被其他使用者或應用程式使用 (所以被�
 
 #: tdeio/global.cpp:597
 msgid ""
-"Check to make sure that no other application or user is using the file or has "
-"locked the file."
+"Check to make sure that no other application or user is using the file or "
+"has locked the file."
 msgstr "請檢查並確定沒有其他應用程式或使用者正在使用或鎖定該檔案。"
 
 #: tdeio/global.cpp:599
@@ -1261,7 +3493,8 @@ msgstr "您可能遇到了程式中的錯誤。"
 msgid ""
 "This is most likely to be caused by a bug in the program. Please consider "
 "submitting a full bug report as detailed below."
-msgstr "這最有可能是程式中的錯誤所導致。請考慮提效一份詳細的問題報告，詳情如下。"
+msgstr ""
+"這最有可能是程式中的錯誤所導致。請考慮提效一份詳細的問題報告，詳情如下。"
 
 #: tdeio/global.cpp:604
 msgid ""
@@ -1274,17 +3507,18 @@ msgstr "請將您的軟體更新至最新版本。您使用的發行版本應該
 msgid ""
 "When all else fails, please consider helping the TDE team or the third party "
 "maintainer of this software by submitting a high quality bug report. If the "
-"software is provided by a third party, please contact them directly. Otherwise, "
-"first look to see if the same bug has been submitted by someone else by "
-"searching at the <a href=\"http://bugs.trinitydesktop.org/\">"
-"TDE bug reporting website</a>. If not, take note of the details given above, "
-"and include them in your bug report, along with as many other details as you "
+"software is provided by a third party, please contact them directly. "
+"Otherwise, first look to see if the same bug has been submitted by someone "
+"else by searching at the <a href=\"http://bugs.trinitydesktop.org/\">TDE bug "
+"reporting website</a>. If not, take note of the details given above, and "
+"include them in your bug report, along with as many other details as you "
 "think might help."
 msgstr ""
-"如果您多番嘗試後仍然無法解決問題，請考慮幫助 TDE "
-"團隊或該軟體的第三方維護者，並提交一份高品質的錯誤報告。如果該軟體是由第三方提供的，請直接與他們聯繫。如果該軟體是 TDE 團隊提供的，請先在 <a "
-"href=\"http://bugs.trinitydesktop.org/\">TDE 錯誤報告網站</a> "
-"搜尋，看看是否已經有人報告了相同的錯誤。如果沒有，請把上面的詳細資訊，以及任何您認為有幫助的細節，附入您的錯誤報告中。"
+"如果您多番嘗試後仍然無法解決問題，請考慮幫助 TDE 團隊或該軟體的第三方維護者，"
+"並提交一份高品質的錯誤報告。如果該軟體是由第三方提供的，請直接與他們聯繫。如"
+"果該軟體是 TDE 團隊提供的，請先在 <a href=\"http://bugs.trinitydesktop.org/"
+"\">TDE 錯誤報告網站</a> 搜尋，看看是否已經有人報告了相同的錯誤。如果沒有，請"
+"把上面的詳細資訊，以及任何您認為有幫助的細節，附入您的錯誤報告中。"
 
 #: tdeio/global.cpp:614
 msgid "There may have been a problem with your network connection."
@@ -1292,14 +3526,15 @@ msgstr "您的網路連線可能有問題。"
 
 #: tdeio/global.cpp:617
 msgid ""
-"There may have been a problem with your network configuration. If you have been "
-"accessing the Internet with no problems recently, this is unlikely."
-msgstr "您的網路設定可能有問題。如果您最近存取網際網路沒有問題，這就不太可能了。"
+"There may have been a problem with your network configuration. If you have "
+"been accessing the Internet with no problems recently, this is unlikely."
+msgstr ""
+"您的網路設定可能有問題。如果您最近存取網際網路沒有問題，這就不太可能了。"
 
 #: tdeio/global.cpp:620
 msgid ""
-"There may have been a problem at some point along the network path between the "
-"server and this computer."
+"There may have been a problem at some point along the network path between "
+"the server and this computer."
 msgstr "在網路中這部電腦和對方伺服器之間的路徑可能有問題。"
 
 #: tdeio/global.cpp:622
@@ -1336,9 +3571,11 @@ msgstr "無法開啟資源進行讀取"
 
 #: tdeio/global.cpp:634
 msgid ""
-"This means that the contents of the requested file or folder <strong>%1</strong> "
-"could not be retrieved, as read access could not be obtained."
-msgstr "這就是說，請求的檔案或資料夾 <strong>%1</strong> 的內容無法接收，因為無法取得讀入權限。"
+"This means that the contents of the requested file or folder <strong>%1</"
+"strong> could not be retrieved, as read access could not be obtained."
+msgstr ""
+"這就是說，請求的檔案或資料夾 <strong>%1</strong> 的內容無法接收，因為無法取得"
+"讀入權限。"
 
 #: tdeio/global.cpp:637
 msgid "You may not have permissions to read the file or open the folder."
@@ -1352,7 +3589,8 @@ msgstr "無法開啟資源進行寫入"
 msgid ""
 "This means that the file, <strong>%1</strong>, could not be written to as "
 "requested, because access with permission to write could not be obtained."
-msgstr "這就是說，該檔案 <strong>%1</strong> 無法按請求寫入，因為無法取得寫入權限。"
+msgstr ""
+"這就是說，該檔案 <strong>%1</strong> 無法按請求寫入，因為無法取得寫入權限。"
 
 #: tdeio/global.cpp:652
 msgid "Cannot Initiate the %1 Protocol"
@@ -1364,16 +3602,21 @@ msgstr "無法啟動行程"
 
 #: tdeio/global.cpp:654
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol could not be started. This is usually due to technical reasons."
-msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式無法啟動。這通常是由某些技術原因所致。"
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol could not be started. This is usually due to technical "
+"reasons."
+msgstr ""
+"在您的電腦上提供 <strong>%1</strong> 協定存取的程式無法啟動。這通常是由某些技"
+"術原因所致。"
 
 #: tdeio/global.cpp:657
 msgid ""
-"The program which provides compatibility with this protocol may not have been "
-"updated with your last update of TDE. This can cause the program to be "
+"The program which provides compatibility with this protocol may not have "
+"been updated with your last update of TDE. This can cause the program to be "
 "incompatible with the current version and thus not start."
-msgstr "提供此通訊協定的相容性的程式，可能並未與您的最新版 TDE 更新。這會造成該程式與目前版本不相容而無法啟動。"
+msgstr ""
+"提供此通訊協定的相容性的程式，可能並未與您的最新版 TDE 更新。這會造成該程式與"
+"目前版本不相容而無法啟動。"
 
 #: tdeio/global.cpp:665
 msgid "Internal Error"
@@ -1381,9 +3624,10 @@ msgstr "內部錯誤"
 
 #: tdeio/global.cpp:666
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol has reported an internal error."
-msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式報告了一個內部錯誤。"
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol has reported an internal error."
+msgstr ""
+"在您的電腦上提供 <strong>%1</strong> 協定存取的程式報告了一個內部錯誤。"
 
 #: tdeio/global.cpp:674
 msgid "Improperly Formatted URL"
@@ -1391,16 +3635,16 @@ msgstr "未正確格式化的 URL"
 
 #: tdeio/global.cpp:675
 msgid ""
-"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator (URL) that you entered was not properly formatted. The format of a URL "
-"is generally as follows:"
-"<blockquote><strong>protocol://user:password@www.example.org:port/folder/filenam"
-"e.extension?query=value</strong></blockquote>"
+"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
+"strong>ocator (URL) that you entered was not properly formatted. The format "
+"of a URL is generally as follows:<blockquote><strong>protocol://user:"
+"password@www.example.org:port/folder/filename.extension?query=value</"
+"strong></blockquote>"
 msgstr ""
-"您所輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator, 統一資源定位符) 格式有誤。一般 URL 的正確格式應該是："
-"<blockquote><strong>protocol://使用者:密碼@www.example.org:埠號/資料夾/檔名.副檔名?查詢=值</strong"
-"></blockquote>"
+"您所輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource "
+"<strong>L</strong>ocator, 統一資源定位符) 格式有誤。一般 URL 的正確格式應該"
+"是：<blockquote><strong>protocol://使用者:密碼@www.example.org:埠號/資料夾/檔"
+"名.副檔名?查詢=值</strong></blockquote>"
 
 #: tdeio/global.cpp:684
 #, c-format
@@ -1409,8 +3653,8 @@ msgstr "不支援的協定 %1"
 
 #: tdeio/global.cpp:685
 msgid ""
-"The protocol <strong>%1</strong> is not supported by the TDE programs currently "
-"installed on this computer."
+"The protocol <strong>%1</strong> is not supported by the TDE programs "
+"currently installed on this computer."
 msgstr "目前安裝在此電腦上的 TDE 程式不支援 <strong>%1</strong> 通訊協定。"
 
 #: tdeio/global.cpp:688
@@ -1419,20 +3663,21 @@ msgstr "不支援要求的通訊協定。"
 
 #: tdeio/global.cpp:689
 msgid ""
-"The versions of the %1 protocol supported by this computer and the server may "
-"be incompatible."
+"The versions of the %1 protocol supported by this computer and the server "
+"may be incompatible."
 msgstr "此電腦支援的 %1 通訊協定的版本可能和伺服器的版本不相容。"
 
 #: tdeio/global.cpp:691
 msgid ""
-"You may perform a search on the Internet for a TDE program (called a tdeioslave "
-"or ioslave) which supports this protocol. Places to search include <a "
-"href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
-"and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
+"You may perform a search on the Internet for a TDE program (called a "
+"tdeioslave or ioslave) which supports this protocol. Places to search "
+"include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a "
+"href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
 msgstr ""
-"您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 ioslave)。建議從 <a "
-"href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
-"和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a> 這兩個地方搜尋。"
+"您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 "
+"ioslave)。建議從 <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
+"和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a> 這兩個地方搜"
+"尋。"
 
 #: tdeio/global.cpp:700
 msgid "URL Does Not Refer to a Resource."
@@ -1444,19 +3689,22 @@ msgstr "該協定是一個過濾協定"
 
 #: tdeio/global.cpp:702
 msgid ""
-"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator (URL) that you entered did not refer to a specific resource."
+"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
+"strong>ocator (URL) that you entered did not refer to a specific resource."
 msgstr ""
-"您輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator, 統一資源定位符) 並不指向特定的資源。"
+"您輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource <strong>L</"
+"strong>ocator, 統一資源定位符) 並不指向特定的資源。"
 
 #: tdeio/global.cpp:705
+#, fuzzy
 msgid ""
-"TDE is able to communicate through a protocol within a protocol; the protocol "
-"specified is only for use in such situations, however this is not one of these "
-"situations. This is a rare event, and is likely to indicate a programming "
-"error."
-msgstr "TDE 能夠在一個協定裡透過另一個協定進行通訊；指定的協定只適用於那種場合，現在卻不是那種場合。這個錯誤比較罕見，大概是編程出錯了。"
+"TDE is able to communicate through a protocol within a protocol the protocol "
+"specified is only for use in such situations, however this is not one of "
+"these situations. This is a rare event, and is likely to indicate a "
+"programming error."
+msgstr ""
+"TDE 能夠在一個協定裡透過另一個協定進行通訊；指定的協定只適用於那種場合，現在"
+"卻不是那種場合。這個錯誤比較罕見，大概是編程出錯了。"
 
 #: tdeio/global.cpp:713
 #, c-format
@@ -1465,8 +3713,8 @@ msgstr "不支援的動作: %1"
 
 #: tdeio/global.cpp:714
 msgid ""
-"The requested action is not supported by the TDE program which is implementing "
-"the <strong>%1</strong> protocol."
+"The requested action is not supported by the TDE program which is "
+"implementing the <strong>%1</strong> protocol."
 msgstr "實作 <strong>%1</strong> 協定的 TDE 程式不支援要求的動作。"
 
 #: tdeio/global.cpp:717
@@ -1474,7 +3722,9 @@ msgid ""
 "This error is very much dependent on the TDE program. The additional "
 "information should give you more information than is available to the TDE "
 "input/output architecture."
-msgstr "這個錯誤非常關乎於個別的 TDE 程式。[額外資訊] 應該可以比 TDE 的輸入/輸出架構給您更多的資訊。"
+msgstr ""
+"這個錯誤非常關乎於個別的 TDE 程式。[額外資訊] 應該可以比 TDE 的輸入/輸出架構"
+"給您更多的資訊。"
 
 #: tdeio/global.cpp:720
 msgid "Attempt to find another way to accomplish the same outcome."
@@ -1486,8 +3736,8 @@ msgstr "需要檔案。"
 
 #: tdeio/global.cpp:726
 msgid ""
-"The request expected a file, however the folder <strong>%1</strong> "
-"was found instead."
+"The request expected a file, however the folder <strong>%1</strong> was "
+"found instead."
 msgstr "該要求需要一個檔案，然而找到的 <strong>%1</strong> 是一個資料夾。"
 
 #: tdeio/global.cpp:728
@@ -1500,8 +3750,8 @@ msgstr "需要資料夾"
 
 #: tdeio/global.cpp:734
 msgid ""
-"The request expected a folder, however the file <strong>%1</strong> "
-"was found instead."
+"The request expected a folder, however the file <strong>%1</strong> was "
+"found instead."
 msgstr "該要求需要一個資料夾，然而找到的 <strong>%1</strong> 是一個檔案。"
 
 #: tdeio/global.cpp:741
@@ -1512,6 +3762,11 @@ msgstr "檔案或資料夾不存在"
 msgid "The specified file or folder <strong>%1</strong> does not exist."
 msgstr "指定的檔案或資料夾 <strong>%1</strong> 不存在。"
 
+#: tdeio/global.cpp:749 tdeio/job.cpp:1796 tdeio/job.cpp:3263
+#: tdeio/job.cpp:3780 tdeio/paste.cpp:65
+msgid "File Already Exists"
+msgstr "檔案已存在"
+
 #: tdeio/global.cpp:750
 msgid ""
 "The requested file could not be created because a file with the same name "
@@ -1536,8 +3791,8 @@ msgstr "資料夾已存在"
 
 #: tdeio/global.cpp:760
 msgid ""
-"The requested folder could not be created because a folder with the same name "
-"already exists."
+"The requested folder could not be created because a folder with the same "
+"name already exists."
 msgstr "無法建立要求的資料夾，因為已經有另一個同名的資料夾存在了。"
 
 #: tdeio/global.cpp:762
@@ -1560,7 +3815,9 @@ msgstr "不明的主機"
 msgid ""
 "An unknown host error indicates that the server with the requested name, "
 "<strong>%1</strong>, could not be located on the Internet."
-msgstr "「不明的主機」這個錯誤，表示在網際網路上找不到所要求的、名為 <strong>%1</strong> 的伺服器。"
+msgstr ""
+"「不明的主機」這個錯誤，表示在網際網路上找不到所要求的、名為 <strong>%1</"
+"strong> 的伺服器。"
 
 #: tdeio/global.cpp:773
 msgid ""
@@ -1585,7 +3842,8 @@ msgstr "您的帳號可能沒有權限存取指定的資源。"
 
 #: tdeio/global.cpp:787 tdeio/global.cpp:1003 tdeio/global.cpp:1015
 msgid ""
-"Retry the request and ensure your authentication details are entered correctly."
+"Retry the request and ensure your authentication details are entered "
+"correctly."
 msgstr "請確定輸入正確的認證細節，再重試要求。"
 
 #: tdeio/global.cpp:793
@@ -1594,8 +3852,8 @@ msgstr "拒絕寫入存取"
 
 #: tdeio/global.cpp:794
 msgid ""
-"This means that an attempt to write to the file <strong>%1</strong> "
-"was rejected."
+"This means that an attempt to write to the file <strong>%1</strong> was "
+"rejected."
 msgstr "這就是說，試圖寫入檔案 <strong>%1</strong> 時被拒絕了。"
 
 #: tdeio/global.cpp:801
@@ -1606,7 +3864,8 @@ msgstr "無法進入資料夾"
 msgid ""
 "This means that an attempt to enter (in other words, to open) the requested "
 "folder <strong>%1</strong> was rejected."
-msgstr "這就是說，試圖進入 (即開啟) 要求的資料夾 <strong>%1</strong> 時被拒絕了。"
+msgstr ""
+"這就是說，試圖進入 (即開啟) 要求的資料夾 <strong>%1</strong> 時被拒絕了。"
 
 #: tdeio/global.cpp:810
 msgid "Folder Listing Unavailable"
@@ -1618,9 +3877,12 @@ msgstr "該協定 %1 不是一個檔案系統"
 
 #: tdeio/global.cpp:812
 msgid ""
-"This means that a request was made which requires determining the contents of "
-"the folder, and the TDE program supporting this protocol is unable to do so."
-msgstr "這就是說，有個要求需要辨識該資料夾的內容，而支援這個協定的 TDE 程式卻無法這樣做。"
+"This means that a request was made which requires determining the contents "
+"of the folder, and the TDE program supporting this protocol is unable to do "
+"so."
+msgstr ""
+"這就是說，有個要求需要辨識該資料夾的內容，而支援這個協定的 TDE 程式卻無法這樣"
+"做。"
 
 #: tdeio/global.cpp:820
 msgid "Cyclic Link Detected"
@@ -1628,18 +3890,18 @@ msgstr "偵測到循環連結"
 
 #: tdeio/global.cpp:821
 msgid ""
-"UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. TDE detected a link or series of links that results in an "
-"infinite loop - i.e. the file was (perhaps in a roundabout way) linked to "
+"UNIX environments are commonly able to link a file or folder to a separate "
+"name and/or location. TDE detected a link or series of links that results in "
+"an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to "
 "itself."
 msgstr ""
-"在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 TDE 偵測到一個或一系列的連結，形成無限循環──也就是說， "
-"該檔案直接或間接地連結回自己。"
+"在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 TDE 偵測到一個"
+"或一系列的連結，形成無限循環──也就是說， 該檔案直接或間接地連結回自己。"
 
 #: tdeio/global.cpp:825 tdeio/global.cpp:847
 msgid ""
-"Delete one part of the loop in order that it does not cause an infinite loop, "
-"and try again."
+"Delete one part of the loop in order that it does not cause an infinite "
+"loop, and try again."
 msgstr "請刪除該循環的一部份，以斷開這個無限循環，再重試。"
 
 #: tdeio/global.cpp:834
@@ -1660,13 +3922,14 @@ msgstr "複製時偵測到循環連結"
 
 #: tdeio/global.cpp:842
 msgid ""
-"UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. During the requested copy operation, TDE detected a link or "
-"series of links that results in an infinite loop - i.e. the file was (perhaps "
-"in a roundabout way) linked to itself."
+"UNIX environments are commonly able to link a file or folder to a separate "
+"name and/or location. During the requested copy operation, TDE detected a "
+"link or series of links that results in an infinite loop - i.e. the file was "
+"(perhaps in a roundabout way) linked to itself."
 msgstr ""
-"在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 正當進行要求的複製動作時，TDE 偵測到一個或一系列的連結， "
-"形成無限循環──也就是說，該檔案直接或間接地連結回自己。"
+"在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 正當進行要求的"
+"複製動作時，TDE 偵測到一個或一系列的連結， 形成無限循環──也就是說，該檔案直接"
+"或間接地連結回自己。"
 
 #: tdeio/global.cpp:852
 msgid "Could Not Create Network Connection"
@@ -1680,13 +3943,14 @@ msgstr "無法建立 Socket"
 msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be created."
-msgstr "這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。"
+msgstr ""
+"這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。"
 
 #: tdeio/global.cpp:856 tdeio/global.cpp:969 tdeio/global.cpp:980
 #: tdeio/global.cpp:989
 msgid ""
-"The network connection may be incorrectly configured, or the network interface "
-"may not be enabled."
+"The network connection may be incorrectly configured, or the network "
+"interface may not be enabled."
 msgstr "可能是網路連線設定不正確，或是網路介面未啟動。"
 
 #: tdeio/global.cpp:862
@@ -1701,14 +3965,14 @@ msgstr "伺服器 <strong>%1</strong> 拒絕了這部電腦的連線請求。"
 
 #: tdeio/global.cpp:865
 msgid ""
-"The server, while currently connected to the Internet, may not be configured to "
-"allow requests."
+"The server, while currently connected to the Internet, may not be configured "
+"to allow requests."
 msgstr "該伺服器雖然在網際網路上，但可能設定為不允許外來的連線請求。"
 
 #: tdeio/global.cpp:867
 msgid ""
-"The server, while currently connected to the Internet, may not be running the "
-"requested service (%1)."
+"The server, while currently connected to the Internet, may not be running "
+"the requested service (%1)."
 msgstr "該伺服器雖然在網際網路上，但是可能沒有執行所需的服務 (%1)。"
 
 #: tdeio/global.cpp:869
@@ -1716,7 +3980,9 @@ msgid ""
 "A network firewall (a device which restricts Internet requests), either "
 "protecting your network or the network of the server, may have intervened, "
 "preventing this request."
-msgstr "可能有個保護您的網路或伺服器的網路的防火牆 (限制網際網路請求的裝置) 干預，妨礙了這個要求。"
+msgstr ""
+"可能有個保護您的網路或伺服器的網路的防火牆 (限制網際網路請求的裝置) 干預，妨"
+"礙了這個要求。"
 
 #: tdeio/global.cpp:876
 msgid "Connection to Server Closed Unexpectedly"
@@ -1724,14 +3990,15 @@ msgstr "往伺服器的連線意外地關閉了"
 
 #: tdeio/global.cpp:877
 msgid ""
-"Although a connection was established to <strong>%1</strong>"
-", the connection was closed at an unexpected point in the communication."
-msgstr "雖然往 <strong>%1</strong> 的連線已經設立了，但通訊其間這個連線意外地中斷了。"
+"Although a connection was established to <strong>%1</strong>, the connection "
+"was closed at an unexpected point in the communication."
+msgstr ""
+"雖然往 <strong>%1</strong> 的連線已經設立了，但通訊其間這個連線意外地中斷了。"
 
 #: tdeio/global.cpp:880
 msgid ""
-"A protocol error may have occurred, causing the server to close the connection "
-"as a response to the error."
+"A protocol error may have occurred, causing the server to close the "
+"connection as a response to the error."
 msgstr "可能發生了一個協定錯誤，導致伺服器回應錯誤而關閉連線。"
 
 #: tdeio/global.cpp:886
@@ -1744,21 +4011,23 @@ msgstr "該協定 %1 不是一個過濾協定"
 
 #: tdeio/global.cpp:888
 msgid ""
-"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator (URL) that you entered did not refer to a valid mechanism of accessing "
-"the specific resource, <strong>%1%2</strong>."
+"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
+"strong>ocator (URL) that you entered did not refer to a valid mechanism of "
+"accessing the specific resource, <strong>%1%2</strong>."
 msgstr ""
-"您輸入的 <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>"
-"ocator (URL) 並不指向有效的機制，無法存取特定的資源 <strong>%1%2</strong>。"
+"您輸入的 <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
+"strong>ocator (URL) 並不指向有效的機制，無法存取特定的資源 <strong>%1%2</"
+"strong>。"
 
 #: tdeio/global.cpp:893
 msgid ""
-"TDE is able to communicate through a protocol within a protocol. This request "
-"specified a protocol be used as such, however this protocol is not capable of "
-"such an action. This is a rare event, and is likely to indicate a programming "
-"error."
+"TDE is able to communicate through a protocol within a protocol. This "
+"request specified a protocol be used as such, however this protocol is not "
+"capable of such an action. This is a rare event, and is likely to indicate a "
+"programming error."
 msgstr ""
-"TDE 能夠在一個協定裡透過另一個協定進行通訊。現在要求指定該協定用作這種過濾用途，但該協定不能用作過濾用途。這個錯誤比較罕見，大概是編程出錯了。"
+"TDE 能夠在一個協定裡透過另一個協定進行通訊。現在要求指定該協定用作這種過濾用"
+"途，但該協定不能用作過濾用途。這個錯誤比較罕見，大概是編程出錯了。"
 
 #: tdeio/global.cpp:901
 msgid "Unable to Initialize Input/Output Device"
@@ -1770,29 +4039,37 @@ msgstr "無法裝載裝置"
 
 #: tdeio/global.cpp:903
 msgid ""
-"The requested device could not be initialized (\"mounted\"). The reported error "
-"was: <strong>%1</strong>"
-msgstr "無法初始化 (裝載, mount) 您所要求的裝置。報告的錯誤是：<strong>%1</strong>"
+"The requested device could not be initialized (\"mounted\"). The reported "
+"error was: <strong>%1</strong>"
+msgstr ""
+"無法初始化 (裝載, mount) 您所要求的裝置。報告的錯誤是：<strong>%1</strong>"
 
 #: tdeio/global.cpp:906
 msgid ""
-"The device may not be ready, for example there may be no media in a removable "
-"media device (i.e. no CD-ROM in a CD drive), or in the case of a "
+"The device may not be ready, for example there may be no media in a "
+"removable media device (i.e. no CD-ROM in a CD drive), or in the case of a "
 "peripheral/portable device, the device may not be correctly connected."
-msgstr "該裝置可能未就緒，例如某抽取式媒體裝置裡可能沒有媒體 (光碟機裡沒有光碟)，或者，對週邊/可攜式裝置而言，可能該裝置的連線不正確。"
+msgstr ""
+"該裝置可能未就緒，例如某抽取式媒體裝置裡可能沒有媒體 (光碟機裡沒有光碟)，或"
+"者，對週邊/可攜式裝置而言，可能該裝置的連線不正確。"
 
 #: tdeio/global.cpp:910
 msgid ""
 "You may not have permissions to initialize (\"mount\") the device. On UNIX "
 "systems, often system administrator privileges are required to initialize a "
 "device."
-msgstr "您可能沒有權限初始化 (裝載, mount) 該裝置。在 UNIX 系統上，通常需要系統管理員的權限，才能初始化裝置。"
+msgstr ""
+"您可能沒有權限初始化 (裝載, mount) 該裝置。在 UNIX 系統上，通常需要系統管理員"
+"的權限，才能初始化裝置。"
 
 #: tdeio/global.cpp:914
+#, fuzzy
 msgid ""
-"Check that the device is ready; removable drives must contain media, and "
-"portable devices must be connected and powered on.; and try again."
-msgstr "請檢查該裝置是否就緒：抽取式磁碟機或光碟機裡必須有媒體，而可攜式裝置必須已連接和打開電源；再重試。"
+"Check that the device is ready removable drives must contain media, and "
+"portable devices must be connected and powered on. and try again."
+msgstr ""
+"請檢查該裝置是否就緒：抽取式磁碟機或光碟機裡必須有媒體，而可攜式裝置必須已連"
+"接和打開電源；再重試。"
 
 #: tdeio/global.cpp:920
 msgid "Unable to Uninitialize Input/Output Device"
@@ -1804,24 +4081,29 @@ msgstr "無法卸載裝置"
 
 #: tdeio/global.cpp:922
 msgid ""
-"The requested device could not be uninitialized (\"unmounted\"). The reported "
-"error was: <strong>%1</strong>"
-msgstr "無法反初始化 (卸載, ummount) 您所要求的裝置。報告的錯誤是：<strong>%1</strong>"
+"The requested device could not be uninitialized (\"unmounted\"). The "
+"reported error was: <strong>%1</strong>"
+msgstr ""
+"無法反初始化 (卸載, ummount) 您所要求的裝置。報告的錯誤是：<strong>%1</"
+"strong>"
 
 #: tdeio/global.cpp:925
 msgid ""
-"The device may be busy, that is, still in use by another application or user. "
-"Even such things as having an open browser window on a location on this device "
-"may cause the device to remain in use."
+"The device may be busy, that is, still in use by another application or "
+"user. Even such things as having an open browser window on a location on "
+"this device may cause the device to remain in use."
 msgstr ""
-"該裝置可能正在忙碌中，也就是說，可能有使用者或應用程式仍然在使用它。儘管只是有個開啟了的瀏覽器視窗在該裝置的某個位置上，也足以使該裝置停留在使用中狀態。"
+"該裝置可能正在忙碌中，也就是說，可能有使用者或應用程式仍然在使用它。儘管只是"
+"有個開啟了的瀏覽器視窗在該裝置的某個位置上，也足以使該裝置停留在使用中狀態。"
 
 #: tdeio/global.cpp:929
 msgid ""
-"You may not have permissions to uninitialize (\"unmount\") the device. On UNIX "
-"systems, system administrator privileges are often required to uninitialize a "
-"device."
-msgstr "您可能沒有權限反初始化 (卸載, ummount) 該裝置。在 UNIX 系統上，通常需要系統管理員的權限，才能初始化裝置。"
+"You may not have permissions to uninitialize (\"unmount\") the device. On "
+"UNIX systems, system administrator privileges are often required to "
+"uninitialize a device."
+msgstr ""
+"您可能沒有權限反初始化 (卸載, ummount) 該裝置。在 UNIX 系統上，通常需要系統管"
+"理員的權限，才能初始化裝置。"
 
 #: tdeio/global.cpp:933
 msgid "Check that no applications are accessing the device, and try again."
@@ -1833,10 +4115,11 @@ msgstr "無法讀入資源"
 
 #: tdeio/global.cpp:939
 msgid ""
-"This means that although the resource, <strong>%1</strong>"
-", was able to be opened, an error occurred while reading the contents of the "
-"resource."
-msgstr "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但讀入這個資源的內容時發生錯誤。"
+"This means that although the resource, <strong>%1</strong>, was able to be "
+"opened, an error occurred while reading the contents of the resource."
+msgstr ""
+"這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但讀入這個資源的內容時發"
+"生錯誤。"
 
 #: tdeio/global.cpp:942
 msgid "You may not have permissions to read from the resource."
@@ -1848,9 +4131,11 @@ msgstr "無法寫入資源"
 
 #: tdeio/global.cpp:952
 msgid ""
-"This means that although the resource, <strong>%1</strong>"
-", was able to be opened, an error occurred while writing to the resource."
-msgstr "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但寫入這個資源時發生錯誤。"
+"This means that although the resource, <strong>%1</strong>, was able to be "
+"opened, an error occurred while writing to the resource."
+msgstr ""
+"這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但寫入這個資源時發生錯"
+"誤。"
 
 #: tdeio/global.cpp:955
 msgid "You may not have permissions to write to the resource."
@@ -1869,7 +4154,9 @@ msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be established to listen for incoming "
 "network connections."
-msgstr "這是一個相當技術性的錯誤，無法設立所需的網路通訊裝置 (socket, 承接口) 以聽候 (listen) 內進的網路連線。"
+msgstr ""
+"這是一個相當技術性的錯誤，無法設立所需的網路通訊裝置 (socket, 承接口) 以聽候 "
+"(listen) 內進的網路連線。"
 
 #: tdeio/global.cpp:976
 msgid "Could Not Listen"
@@ -1881,8 +4168,8 @@ msgstr "無法接受網路連線"
 
 #: tdeio/global.cpp:987
 msgid ""
-"This is a fairly technical error in which an error occurred while attempting to "
-"accept an incoming network connection."
+"This is a fairly technical error in which an error occurred while attempting "
+"to accept an incoming network connection."
 msgstr "這是一個相當技術性的錯誤，試圖接受 (accept) 內進的網路連線時發生錯誤。"
 
 #: tdeio/global.cpp:991
@@ -1911,7 +4198,9 @@ msgstr "無法查詢資源狀態"
 msgid ""
 "An attempt to determine information about the status of the resource <strong>"
 "%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
-msgstr "剛試圖查詢關於資源 <strong>%1</strong> 狀態的資訊，例如資源名稱、類型、大小等等，但不成功。"
+msgstr ""
+"剛試圖查詢關於資源 <strong>%1</strong> 狀態的資訊，例如資源名稱、類型、大小等"
+"等，但不成功。"
 
 #: tdeio/global.cpp:1013
 msgid "The specified resource may not have existed or may not be accessible."
@@ -1963,9 +4252,11 @@ msgstr "無法恢復檔案傳送"
 
 #: tdeio/global.cpp:1048
 msgid ""
-"The specified request asked that the transfer of file <strong>%1</strong> "
-"be resumed at a certain point of the transfer. This was not possible."
-msgstr "在傳送檔案 <strong>%1</strong> 中途時，指定要求重新繼續傳送的請求。這是不可能的。"
+"The specified request asked that the transfer of file <strong>%1</strong> be "
+"resumed at a certain point of the transfer. This was not possible."
+msgstr ""
+"在傳送檔案 <strong>%1</strong> 中途時，指定要求重新繼續傳送的請求。這是不可能"
+"的。"
 
 #: tdeio/global.cpp:1051
 msgid "The protocol, or the server, may not support file resuming."
@@ -1989,8 +4280,8 @@ msgstr "無法變更資源的權限"
 
 #: tdeio/global.cpp:1068
 msgid ""
-"An attempt to alter the permissions on the specified resource <strong>"
-"%1</strong> failed."
+"An attempt to alter the permissions on the specified resource <strong>%1</"
+"strong> failed."
 msgstr "剛試圖變更指定的資源 <strong>%1</strong> 的權限，但失敗了。"
 
 #: tdeio/global.cpp:1075
@@ -2007,8 +4298,8 @@ msgstr "非預期的程式終止。"
 
 #: tdeio/global.cpp:1084
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol has unexpectedly terminated."
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol has unexpectedly terminated."
 msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式意外地突然終止了。"
 
 #: tdeio/global.cpp:1092
@@ -2017,9 +4308,11 @@ msgstr "記憶體不足"
 
 #: tdeio/global.cpp:1093
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol could not obtain the memory required to continue."
-msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式未能取得所需的記憶體，無法繼續。"
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol could not obtain the memory required to continue."
+msgstr ""
+"在您的電腦上提供 <strong>%1</strong> 協定存取的程式未能取得所需的記憶體，無法"
+"繼續。"
 
 #: tdeio/global.cpp:1101
 msgid "Unknown Proxy Host"
@@ -2027,18 +4320,21 @@ msgstr "不明的代理伺服器主機"
 
 #: tdeio/global.cpp:1102
 msgid ""
-"While retrieving information about the specified proxy host, <strong>%1</strong>"
-", an Unknown Host error was encountered. An unknown host error indicates that "
-"the requested name could not be located on the Internet."
+"While retrieving information about the specified proxy host, <strong>%1</"
+"strong>, an Unknown Host error was encountered. An unknown host error "
+"indicates that the requested name could not be located on the Internet."
 msgstr ""
-"當抓取特定的 proxy 主機 <strong>%1</strong> 時，發生找不到主機的錯誤。該錯誤通常代表該主機名稱在網際網路上找不到。"
+"當抓取特定的 proxy 主機 <strong>%1</strong> 時，發生找不到主機的錯誤。該錯誤"
+"通常代表該主機名稱在網際網路上找不到。"
 
 #: tdeio/global.cpp:1106
 msgid ""
 "There may have been a problem with your network configuration, specifically "
-"your proxy's hostname. If you have been accessing the Internet with no problems "
-"recently, this is unlikely."
-msgstr "您的網路設定可能有問題，特別是您的 proxy 主機名稱。如果您最近曾經很正常的使用網路，那一定有問題。"
+"your proxy's hostname. If you have been accessing the Internet with no "
+"problems recently, this is unlikely."
+msgstr ""
+"您的網路設定可能有問題，特別是您的 proxy 主機名稱。如果您最近曾經很正常的使用"
+"網路，那一定有問題。"
 
 #: tdeio/global.cpp:1110
 msgid "Double-check your proxy settings and try again."
@@ -2054,17 +4350,19 @@ msgid ""
 "Although you may have supplied the correct authentication details, the "
 "authentication failed because the method that the server is using is not "
 "supported by the TDE program implementing the protocol %1."
-msgstr "隨然您或許還沒有提供正確的授權方式，這次授權動作已經失敗了。這樣因為伺服器所提供的授權方式，TDE 程式所實做的 %1 協定中並不支援。"
+msgstr ""
+"隨然您或許還沒有提供正確的授權方式，這次授權動作已經失敗了。這樣因為伺服器所"
+"提供的授權方式，TDE 程式所實做的 %1 協定中並不支援。"
 
 #: tdeio/global.cpp:1121
 #, fuzzy
 msgid ""
-"Please file a bug at <a href=\"http://bugs.trinitydesktop.org/\">"
-"http://bugs.trinitydesktop.org/</a> to inform the TDE team of the unsupported "
+"Please file a bug at <a href=\"http://bugs.trinitydesktop.org/\">http://bugs."
+"trinitydesktop.org/</a> to inform the TDE team of the unsupported "
 "authentication method."
 msgstr ""
-"請在 <a href=\"http://bugs.trinitydesktop.org/\">http://bugs.trinitydesktop.org/</a> "
-"做一個錯誤登記，以便告知 TDE 團隊這個不被支援的驗證方式。"
+"請在 <a href=\"http://bugs.trinitydesktop.org/\">http://bugs.trinitydesktop."
+"org/</a> 做一個錯誤登記，以便告知 TDE 團隊這個不被支援的驗證方式。"
 
 #: tdeio/global.cpp:1127
 msgid "Request Aborted"
@@ -2084,7 +4382,8 @@ msgstr "伺服器上提供 <strong>%1</strong> 協定的存取的程式報告內
 msgid ""
 "This is most likely to be caused by a bug in the server program. Please "
 "consider submitting a full bug report as detailed below."
-msgstr "這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。"
+msgstr ""
+"這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。"
 
 #: tdeio/global.cpp:1141
 msgid "Contact the administrator of the server to advise them of the problem."
@@ -2092,8 +4391,8 @@ msgstr "請聯繫伺服器的管理員，報告這個問題。"
 
 #: tdeio/global.cpp:1143
 msgid ""
-"If you know who the authors of the server software are, submit the bug report "
-"directly to them."
+"If you know who the authors of the server software are, submit the bug "
+"report directly to them."
 msgstr "如果您知道誰是該伺服器軟體的作者，請直接把錯誤報告提交給他們。"
 
 #: tdeio/global.cpp:1148
@@ -2102,20 +4401,17 @@ msgstr "逾時錯誤"
 
 #: tdeio/global.cpp:1149
 msgid ""
-"Although contact was made with the server, a response was not received within "
-"the amount of time allocated for the request as follows:"
-"<ul>"
-"<li>Timeout for establishing a connection: %1 seconds</li>"
-"<li>Timeout for receiving a response: %2 seconds</li>"
-"<li>Timeout for accessing proxy servers: %3 seconds</li></ul>"
-"Please note that you can alter these timeout settings in the TDE Control "
-"Center, by selecting Network -> Preferences."
-msgstr ""
-"雖然已經與伺服器聯繫，但在配置給該要求的限定時間內，未收到伺服器的回應，細節如下："
-"<ul>"
-"<li>設立連線逾時時限：%1 秒</li>"
-"<li>接收回應逾時時限：%2 秒</li>"
-"<li>存取代理伺服器逾時時限：%3 秒</li></ul>註：您可以在 TDE 控制中心，選擇 [網路] -> [偏好設定]，以變更這些逾時時限設定。"
+"Although contact was made with the server, a response was not received "
+"within the amount of time allocated for the request as follows:"
+"<ul><li>Timeout for establishing a connection: %1 seconds</li><li>Timeout "
+"for receiving a response: %2 seconds</li><li>Timeout for accessing proxy "
+"servers: %3 seconds</li></ul>Please note that you can alter these timeout "
+"settings in the TDE Control Center, by selecting Network -> Preferences."
+msgstr ""
+"雖然已經與伺服器聯繫，但在配置給該要求的限定時間內，未收到伺服器的回應，細節"
+"如下：<ul><li>設立連線逾時時限：%1 秒</li><li>接收回應逾時時限：%2 秒</"
+"li><li>存取代理伺服器逾時時限：%3 秒</li></ul>註：您可以在 TDE 控制中心，選"
+"擇 [網路] -> [偏好設定]，以變更這些逾時時限設定。"
 
 #: tdeio/global.cpp:1160
 msgid "The server was too busy responding to other requests to respond."
@@ -2127,9 +4423,11 @@ msgstr "不明的錯誤"
 
 #: tdeio/global.cpp:1167
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol has reported an unknown error: %2."
-msgstr "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一個不明的錯誤：%2。"
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol has reported an unknown error: %2."
+msgstr ""
+"您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一個不明的錯誤："
+"%2。"
 
 #: tdeio/global.cpp:1175
 msgid "Unknown Interruption"
@@ -2137,9 +4435,11 @@ msgstr "不明的中斷"
 
 #: tdeio/global.cpp:1176
 msgid ""
-"The program on your computer which provides access to the <strong>%1</strong> "
-"protocol has reported an interruption of an unknown type: %2."
-msgstr "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一種類型不明的中斷：%2。"
+"The program on your computer which provides access to the <strong>%1</"
+"strong> protocol has reported an interruption of an unknown type: %2."
+msgstr ""
+"您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一種類型不明的中"
+"斷：%2。"
 
 #: tdeio/global.cpp:1184
 msgid "Could Not Delete Original File"
@@ -2147,10 +4447,12 @@ msgstr "無法刪除原本的檔案"
 
 #: tdeio/global.cpp:1185
 msgid ""
-"The requested operation required the deleting of the original file, most likely "
-"at the end of a file move operation. The original file <strong>%1</strong> "
-"could not be deleted."
-msgstr "要求的作業需要刪除原本的檔案，多數是移動檔案時最後一個動作。可是，現在無法刪除原本的檔案 <strong>%1</strong>。"
+"The requested operation required the deleting of the original file, most "
+"likely at the end of a file move operation. The original file <strong>%1</"
+"strong> could not be deleted."
+msgstr ""
+"要求的作業需要刪除原本的檔案，多數是移動檔案時最後一個動作。可是，現在無法刪"
+"除原本的檔案 <strong>%1</strong>。"
 
 #: tdeio/global.cpp:1194
 msgid "Could Not Delete Temporary File"
@@ -2158,10 +4460,12 @@ msgstr "無法刪除暫存檔案"
 
 #: tdeio/global.cpp:1195
 msgid ""
-"The requested operation required the creation of a temporary file in which to "
-"save the new file while being downloaded. This temporary file <strong>"
-"%1</strong> could not be deleted."
-msgstr "要求的作業需要建立一個暫存檔案，以儲存下載中的新檔案。可是，現在無法刪除該暫存檔案 <strong>%1</strong>。"
+"The requested operation required the creation of a temporary file in which "
+"to save the new file while being downloaded. This temporary file <strong>%1</"
+"strong> could not be deleted."
+msgstr ""
+"要求的作業需要建立一個暫存檔案，以儲存下載中的新檔案。可是，現在無法刪除該暫"
+"存檔案 <strong>%1</strong>。"
 
 #: tdeio/global.cpp:1204
 msgid "Could Not Rename Original File"
@@ -2171,7 +4475,9 @@ msgstr "無法重新命名原本檔案"
 msgid ""
 "The requested operation required the renaming of the original file <strong>"
 "%1</strong>, however it could not be renamed."
-msgstr "要求的作業需要重新命名原本的檔案 <strong>%1</strong>，然而現在卻無法為它重新命名。"
+msgstr ""
+"要求的作業需要重新命名原本的檔案 <strong>%1</strong>，然而現在卻無法為它重新"
+"命名。"
 
 #: tdeio/global.cpp:1213
 msgid "Could Not Rename Temporary File"
@@ -2181,7 +4487,9 @@ msgstr "無法重新命名暫存檔案"
 msgid ""
 "The requested operation required the creation of a temporary file <strong>"
 "%1</strong>, however it could not be created."
-msgstr "要求的作業需要建立一個暫存檔案 <strong>%1</strong>，然而現在無法建立該暫存檔案。"
+msgstr ""
+"要求的作業需要建立一個暫存檔案 <strong>%1</strong>，然而現在無法建立該暫存檔"
+"案。"
 
 #: tdeio/global.cpp:1222
 msgid "Could Not Create Link"
@@ -2210,12 +4518,14 @@ msgid ""
 msgstr "要求的檔案 <strong>%1</strong> 無法寫入，因為磁碟空間不足。"
 
 #: tdeio/global.cpp:1239
+#, fuzzy
 msgid ""
-"Free up enough disk space by 1) deleting unwanted and temporary files; 2) "
-"archiving files to removable media storage such as CD-Recordable discs; or 3) "
+"Free up enough disk space by 1) deleting unwanted and temporary files 2) "
+"archiving files to removable media storage such as CD-Recordable discs or 3) "
 "obtain more storage capacity."
 msgstr ""
-"請以下列方法釋放足夠的磁碟空間： 1) 刪除不需的或暫存的檔案； 2) 把檔案歸檔至抽取式媒體存儲，例如 CD-R 可燒錄光碟； 3) 取得更多存儲容量。"
+"請以下列方法釋放足夠的磁碟空間： 1) 刪除不需的或暫存的檔案； 2) 把檔案歸檔至"
+"抽取式媒體存儲，例如 CD-R 可燒錄光碟； 3) 取得更多存儲容量。"
 
 #: tdeio/global.cpp:1246
 msgid "Source and Destination Files Identical"
@@ -2223,8 +4533,8 @@ msgstr "來源跟目的都是同一個檔案"
 
 #: tdeio/global.cpp:1247
 msgid ""
-"The operation could not be completed because the source and destination files "
-"are the same file."
+"The operation could not be completed because the source and destination "
+"files are the same file."
 msgstr "無法完成作業，因為來源跟目的都是同一個檔案。"
 
 #: tdeio/global.cpp:1249
@@ -2235,6 +4545,243 @@ msgstr "請為目的檔案選擇另一個檔名。"
 msgid "Undocumented Error"
 msgstr "未有說明的錯誤"
 
+#: tdeio/job.cpp:3263 tdeio/job.cpp:3780
+msgid "Already Exists as Folder"
+msgstr "已存在以此為名的資料夾"
+
+#: tdeio/kdcopservicestarter.cpp:64
+#, c-format
+msgid "No service implementing %1"
+msgstr "沒有服務實作 %1"
+
+#: tdeio/kdirlister.cpp:296 tdeio/kdirlister.cpp:307 tdeio/krun.cpp:996
+#: tdeio/paste.cpp:213 tdeio/renamedlg.cpp:433
+#, c-format
+msgid ""
+"Malformed URL\n"
+"%1"
+msgstr ""
+"不正確的 URL\n"
+"%1"
+
+#: tdeio/kimageio.cpp:231
+msgid "All Pictures"
+msgstr "所有圖片"
+
+#: tdeio/kmimetype.cpp:110
+msgid "No mime types installed."
+msgstr "沒有安裝 MIME 類型。"
+
+#: tdeio/kmimetype.cpp:136
+#, c-format
+msgid ""
+"Could not find mime type\n"
+"%1"
+msgstr ""
+"找不到 MIME 類型\n"
+"%1"
+
+#: tdeio/kmimetype.cpp:798
+msgid "The desktop entry file %1 has no Type=... entry."
+msgstr "桌面項目檔案 %1 中沒有 Type=... 項目。"
+
+#: tdeio/kmimetype.cpp:819
+msgid ""
+"The desktop entry of type\n"
+"%1\n"
+"is unknown."
+msgstr ""
+"類型 %1 中的桌面\n"
+"項目\n"
+"無法辨識。"
+
+#: tdeio/kmimetype.cpp:833 tdeio/kmimetype.cpp:935 tdeio/kmimetype.cpp:1117
+msgid ""
+"The desktop entry file\n"
+"%1\n"
+"is of type FSDevice but has no Dev=... entry."
+msgstr ""
+"桌面項目檔案\n"
+"%1\n"
+"為 FSDevice 類型，但沒有 Dev=... 項目。"
+
+#: tdeio/kmimetype.cpp:879
+msgid ""
+"The desktop entry file\n"
+"%1\n"
+"is of type Link but has no URL=... entry."
+msgstr ""
+"桌面項目檔案\n"
+"%1\n"
+"為 Link 類型，但沒有 URL=... 項目。"
+
+#: tdeio/kmimetype.cpp:945
+msgid "Mount"
+msgstr "裝載"
+
+#: tdeio/kmimetype.cpp:956
+msgid "Eject"
+msgstr "退出"
+
+#: tdeio/kmimetype.cpp:958
+msgid "Unmount"
+msgstr "卸載"
+
+#: tdeio/kmimetype.cpp:1075
+msgid ""
+"The desktop entry file\n"
+"%1\n"
+" has an invalid menu entry\n"
+"%2."
+msgstr ""
+"桌面項目檔案\n"
+"%1\n"
+" 有一無效選單項目\n"
+"%2。"
+
+#: tdeio/kmimetypechooser.cpp:84
+msgid "Patterns"
+msgstr "樣式"
+
+#: tdeio/kmimetypechooser.cpp:94
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#: tdeio/kmimetypechooser.cpp:104
+msgid "Click this button to display the familiar TDE mime type editor."
+msgstr "按這個按鈕來顯示熟悉的 TDE mime 類型編輯器。"
+
+#: tdeio/krun.cpp:128
+msgid ""
+"<qt>Unable to enter <b>%1</b>.\n"
+"You do not have access rights to this location.</qt>"
+msgstr ""
+"<qt>無法進入 <b>%1</b>。\n"
+"您沒有這個位置的存取權限。</qt>"
+
+#: tdeio/krun.cpp:173
+msgid ""
+"<qt>The file <b>%1</b> is an executable program. For safety it will not be "
+"started.</qt>"
+msgstr "<qt>檔案 <b>%1</b> 是一個可執行的程式。為了安全將不會執行它。</qt>"
+
+#: tdeio/krun.cpp:180
+msgid "<qt>You do not have permission to run <b>%1</b>.</qt>"
+msgstr "<qt>您沒有執行 <b>%1</b> 的權限。</qt>"
+
+#: tdeio/krun.cpp:217
+msgid "You are not authorized to open this file."
+msgstr "您未獲授權去開啟此檔案。"
+
+#: tdeio/krun.cpp:559
+msgid "You are not authorized to execute this file."
+msgstr "您未獲授權去執行此檔案。"
+
+#: tdeio/krun.cpp:579
+#, c-format
+msgid "Launching %1"
+msgstr "裝載 %1 中"
+
+#: tdeio/krun.cpp:774
+msgid "You are not authorized to execute this service."
+msgstr "您未獲授權去執行此服務。"
+
+#: tdeio/krun.cpp:1033
+msgid ""
+"<qt>Unable to run the command specified. The file or folder <b>%1</b> does "
+"not exist.</qt>"
+msgstr "<qt>無法執行指定的命令。這個檔案或資料夾 <b>%1</b> 不存在。</qt>"
+
+#: tdeio/krun.cpp:1555
+msgid "Could not find the program '%1'"
+msgstr "找不到程式「%1」"
+
+#: tdeio/kscan.cpp:52
+msgid "Acquire Image"
+msgstr "擷取影像"
+
+#: tdeio/kscan.cpp:95
+msgid "OCR Image"
+msgstr "OCR 影像"
+
+#: tdeio/kservice.cpp:923
+msgid "Updating System Configuration"
+msgstr "更新系統組態"
+
+#: tdeio/kservice.cpp:924
+msgid "Updating system configuration."
+msgstr "更新系統組態。"
+
+#: tdeio/kshred.cpp:214
+msgid "Shredding:  pass %1 of 35"
+msgstr "強力刪除：正在進行 35 次中的第 %1 次刪除"
+
+#: tdeio/netaccess.cpp:67
+msgid "File '%1' is not readable"
+msgstr "檔案「%1」無法讀取"
+
+#: tdeio/netaccess.cpp:461
+msgid "ERROR: Unknown protocol '%1'"
+msgstr "錯誤：不明的協定「%1」。"
+
+#: tdeio/passdlg.cpp:57
+msgid "Password"
+msgstr "密碼"
+
+#: tdeio/passdlg.cpp:98
+msgid "You need to supply a username and a password"
+msgstr "您需要提供一組使用者名稱和密碼"
+
+#: tdeio/passdlg.cpp:125
+msgid "&Password:"
+msgstr "密碼(&P)："
+
+#: tdeio/passdlg.cpp:147
+msgid "&Keep password"
+msgstr "保存密碼(&K)"
+
+#: tdeio/paste.cpp:49 tdeio/paste.cpp:115
+msgid "Filename for clipboard content:"
+msgstr "剪貼簿內容的檔名："
+
+#: tdeio/paste.cpp:108
+msgid "%1 (%2)"
+msgstr "%1 (%2)"
+
+#: tdeio/paste.cpp:123
+msgid ""
+"The clipboard has changed since you used 'paste': the chosen data format is "
+"no longer applicable. Please copy again what you wanted to paste."
+msgstr ""
+"當您使用「貼上」時剪貼簿已經改變了：所選擇的資料格式已經不適用了。請再次複製"
+"您所想要貼上的項目。"
+
+#: tdeio/paste.cpp:201 tdeio/paste.cpp:224 tdeio/paste.cpp:251
+msgid "The clipboard is empty"
+msgstr "剪貼簿是空的"
+
+#: tdeio/paste.cpp:299
+#, c-format
+msgid ""
+"_n: &Paste File\n"
+"&Paste %n Files"
+msgstr "貼上 %n 個檔案(&P)"
+
+#: tdeio/paste.cpp:301
+#, c-format
+msgid ""
+"_n: &Paste URL\n"
+"&Paste %n URLs"
+msgstr "貼上 %n 個網址(&P)"
+
+#: tdeio/paste.cpp:303
+msgid "&Paste Clipboard Contents"
+msgstr "貼上剪貼簿內容(&P)"
+
+#: tdeio/pastedialog.cpp:49
+msgid "Data format:"
+msgstr "資料格式:"
+
 #: tdeio/renamedlg.cpp:119
 msgid "&Rename"
 msgstr "重新命名(&R)"
@@ -2310,29 +4857,53 @@ msgstr "修改於 %1"
 msgid "The source file is '%1'"
 msgstr "來源檔案是「%1」"
 
-#: tdefile/kpropertiesdialog.cpp:2766 tdeio/kmimetypechooser.cpp:75
-msgid "Mime Type"
-msgstr "MIME 類型"
+#: misc/tdewalletd/tdewalletwizard.ui:169 tdeio/skipdlg.cpp:56
+#, fuzzy, no-c-format
+msgid "Information"
+msgstr "TDE SSL 資訊"
 
-#: tdefile/kpropertiesdialog.cpp:2777 tdeio/kmimetypechooser.cpp:80
-msgid "Comment"
-msgstr "備註"
+#: tdeio/skipdlg.cpp:63
+msgid "Skip"
+msgstr "略過"
 
-#: tdeio/kmimetypechooser.cpp:84
-msgid "Patterns"
-msgstr "樣式"
+#: tdeio/skipdlg.cpp:66
+msgid "Auto Skip"
+msgstr "自動略過"
 
-#: tdeio/kmimetypechooser.cpp:94
-msgid "&Edit..."
-msgstr "編輯(&E)..."
+#: tdeio/slave.cpp:370
+#, c-format
+msgid "Unable to create io-slave: %1"
+msgstr "無法建立 io-slave: %1"
 
-#: tdeio/kmimetypechooser.cpp:104
-msgid "Click this button to display the familiar TDE mime type editor."
-msgstr "按這個按鈕來顯示熟悉的 TDE mime 類型編輯器。"
+#: tdeio/slave.cpp:401
+msgid "Unknown protocol '%1'."
+msgstr "不明的協定「%1」。"
+
+#: tdeio/slave.cpp:409
+msgid "Can not find io-slave for protocol '%1'."
+msgstr "找不到「%1」協定的 io-slave 程式。"
+
+#: tdeio/slave.cpp:437
+msgid "Cannot talk to tdelauncher"
+msgstr "無法與 tdelauncher 交談"
+
+#: tdeio/slave.cpp:448
+#, c-format
+msgid ""
+"Unable to create io-slave:\n"
+"tdelauncher said: %1"
+msgstr ""
+"無法建立 io-slave:\n"
+"tdelauncher 回應: %1"
+
+#: tdeio/statusbarprogress.cpp:132
+msgid " Stalled "
+msgstr " 停止 "
 
 #: tdeio/tcpslavebase.cpp:319
 msgid ""
-"You are about to leave secure mode. Transmissions will no longer be encrypted.\n"
+"You are about to leave secure mode. Transmissions will no longer be "
+"encrypted.\n"
 "This means that a third party could observe your data in transit."
 msgstr ""
 "您即將離開安全模式，資料傳輸將不再被加密。\n"
@@ -2362,14 +4933,10 @@ msgstr "無法開啟憑證。要試用新的密碼嗎？"
 msgid "The procedure to set the client certificate for the session failed."
 msgstr "為本次協議所設定的客戶端憑證失敗。"
 
-#: misc/uiserver.cpp:1218 tdeio/observer.cpp:332 tdeio/tcpslavebase.cpp:706
-msgid "SSL"
-msgstr "SSL"
-
 #: tdeio/tcpslavebase.cpp:877
 msgid ""
-"The IP address of the host %1 does not match the one the certificate was issued "
-"to."
+"The IP address of the host %1 does not match the one the certificate was "
+"issued to."
 msgstr "主機 %1 的 IP 位址與憑證原先發行給的位址不相符。"
 
 #: tdeio/tcpslavebase.cpp:882 tdeio/tcpslavebase.cpp:890
@@ -2409,7 +4976,9 @@ msgstr "只用於目前的工作階段(&C)"
 msgid ""
 "You have indicated that you wish to accept this certificate, but it is not "
 "issued to the server who is presenting it. Do you wish to continue loading?"
-msgstr "您表示您想接受此憑證，但它並不是頒發給現在出示此憑證的伺服器。您真的要繼續載入嗎？"
+msgstr ""
+"您表示您想接受此憑證，但它並不是頒發給現在出示此憑證的伺服器。您真的要繼續載"
+"入嗎？"
 
 #: tdeio/tcpslavebase.cpp:1010
 #, fuzzy
@@ -2424,8 +4993,8 @@ msgstr "連線(&N)"
 
 #: tdeio/tcpslavebase.cpp:1078
 msgid ""
-"You are about to enter secure mode. All transmissions will be encrypted unless "
-"otherwise noted.\n"
+"You are about to enter secure mode. All transmissions will be encrypted "
+"unless otherwise noted.\n"
 "This means that no third party will be able to easily observe your data in "
 "transit."
 msgstr ""
@@ -2440,6 +5009,12 @@ msgstr "顯示 SSL 資訊(&I)"
 msgid "C&onnect"
 msgstr "連線(&O)"
 
+#: tdeio/tdeemailsettings.cpp:254 tdeio/tdeemailsettings.cpp:257
+#: tdeio/tdeemailsettings.cpp:264
+#, fuzzy
+msgid "Default"
+msgstr " (預設)"
+
 #: tdeio/tdefileitem.cpp:904
 msgid "Symbolic Link"
 msgstr "符號連結"
@@ -2448,28 +5023,10 @@ msgstr "符號連結"
 msgid "%1 (Link)"
 msgstr "%1 (連結)"
 
-#: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:270
-#: bookmarks/kbookmarkmenu.cc:791 tdefile/kpropertiesdialog.cpp:4030
-#: tdeio/tdefileitem.cpp:948
-msgid "Name:"
-msgstr "名稱："
-
-#: tdefile/kpropertiesdialog.cpp:951 tdeio/tdefileitem.cpp:949
-msgid "Type:"
-msgstr "類型："
-
 #: tdeio/tdefileitem.cpp:953
 msgid "Link to %1 (%2)"
 msgstr "連結至 %1 (%2)"
 
-#: tdefile/kpropertiesdialog.cpp:1001 tdeio/tdefileitem.cpp:961
-msgid "Size:"
-msgstr "大小："
-
-#: tdefile/kpropertiesdialog.cpp:1069 tdeio/tdefileitem.cpp:966
-msgid "Modified:"
-msgstr "修改時間："
-
 #: tdeio/tdefileitem.cpp:972
 msgid "Owner:"
 msgstr "擁有者:"
@@ -2530,97 +5087,14 @@ msgstr "Hz"
 msgid "mm"
 msgstr "mm"
 
-#: tdeio/krun.cpp:128
-msgid ""
-"<qt>Unable to enter <b>%1</b>.\n"
-"You do not have access rights to this location.</qt>"
+#: tdeio/tdefilemetainfo.cpp:1613
+msgid "Yes"
 msgstr ""
-"<qt>無法進入 <b>%1</b>。\n"
-"您沒有這個位置的存取權限。</qt>"
-
-#: tdeio/krun.cpp:173
-msgid ""
-"<qt>The file <b>%1</b> is an executable program. For safety it will not be "
-"started.</qt>"
-msgstr "<qt>檔案 <b>%1</b> 是一個可執行的程式。為了安全將不會執行它。</qt>"
-
-#: tdeio/krun.cpp:180
-msgid "<qt>You do not have permission to run <b>%1</b>.</qt>"
-msgstr "<qt>您沒有執行 <b>%1</b> 的權限。</qt>"
 
-#: tdeio/krun.cpp:217
-msgid "You are not authorized to open this file."
-msgstr "您未獲授權去開啟此檔案。"
-
-#: tdefile/kopenwith.cpp:835 tdeio/krun.cpp:221
-msgid "Open with:"
-msgstr "開啟用："
-
-#: tdeio/krun.cpp:559
-msgid "You are not authorized to execute this file."
-msgstr "您未獲授權去執行此檔案。"
-
-#: tdeio/krun.cpp:579
-#, c-format
-msgid "Launching %1"
-msgstr "裝載 %1 中"
-
-#: tdeio/krun.cpp:774
-msgid "You are not authorized to execute this service."
-msgstr "您未獲授權去執行此服務。"
-
-#: tdeio/krun.cpp:1033
-msgid ""
-"<qt>Unable to run the command specified. The file or folder <b>%1</b> "
-"does not exist.</qt>"
-msgstr "<qt>無法執行指定的命令。這個檔案或資料夾 <b>%1</b> 不存在。</qt>"
-
-#: tdeio/krun.cpp:1555
-msgid "Could not find the program '%1'"
-msgstr "找不到程式「%1」"
-
-#: misc/uiserver.cpp:1218 tdeio/observer.cpp:332
-msgid "The peer SSL certificate appears to be corrupt."
-msgstr "對等的 SSL 憑證可能損壞了。"
-
-#: tdeio/skipdlg.cpp:63
-msgid "Skip"
-msgstr "略過"
-
-#: tdeio/skipdlg.cpp:66
-msgid "Auto Skip"
-msgstr "自動略過"
-
-#: tdeio/kdcopservicestarter.cpp:64
-#, c-format
-msgid "No service implementing %1"
-msgstr "沒有服務實作 %1"
-
-#: tdeio/kshred.cpp:212
-msgid "Shredding:  pass %1 of 35"
-msgstr "強力刪除：正在進行 35 次中的第 %1 次刪除"
-
-#: tdeio/statusbarprogress.cpp:132
-msgid " Stalled "
-msgstr " 停止 "
-
-#: misc/uiserver.cpp:1102 tdeio/statusbarprogress.cpp:134
-msgid " %1/s "
-msgstr " %1/秒 "
-
-#: tdeio/chmodjob.cpp:173
-msgid ""
-"<qt>Could not modify the ownership of file <b>%1</b>"
-". You have insufficient access to the file to perform the change.</qt>"
-msgstr "<qt>無法更改檔案 <b>%1</b> 的擁有權。您沒有足夠的檔案存取權來做這個改變。</qt>"
-
-#: tdeio/chmodjob.cpp:173
-msgid "&Skip File"
-msgstr "略過檔案(&S)"
-
-#: tdeio/job.cpp:3263 tdeio/job.cpp:3780
-msgid "Already Exists as Folder"
-msgstr "已存在以此為名的資料夾"
+#: tdeio/tdefilemetainfo.cpp:1613
+#, fuzzy
+msgid "No"
+msgstr "無"
 
 #: tdeioexec/main.cpp:50
 msgid "TDEIO Exec - Opens remote files, watches modifications, asks for upload"
@@ -2643,10 +5117,8 @@ msgid "URL(s) or local file(s) used for 'command'"
 msgstr "給「command」使用的網址或本地檔案"
 
 #: tdeioexec/main.cpp:73
-msgid ""
-"'command' expected.\n"
-msgstr ""
-"預期的「command」。\n"
+msgid "'command' expected.\n"
+msgstr "預期的「command」。\n"
 
 #: tdeioexec/main.cpp:102
 msgid ""
@@ -2708,2767 +5180,6 @@ msgstr "不要上傳"
 msgid "KIOExec"
 msgstr "KIOExec"
 
-#: httpfilter/httpfilter.cc:278
-msgid "Unexpected end of data, some information may be lost."
-msgstr "未預期的資料結尾，某些資訊可能遺失。"
-
-#: httpfilter/httpfilter.cc:335
-msgid "Receiving corrupt data."
-msgstr "接收到損毀的資料。"
-
-#. i18n: file ./kssl/keygenwizard2.ui line 25
-#: rc.cpp:3
-#, no-c-format
-msgid ""
-"You must now provide a password for the certificate request. Please choose a "
-"very secure password as this will be used to encrypt your private key."
-msgstr "您現在必須就為憑證請求提供一個密碼。請選擇非常安全的密碼，因為該密碼會用來加密您的私人密鑰。"
-
-#. i18n: file ./kssl/keygenwizard2.ui line 38
-#: rc.cpp:6
-#, no-c-format
-msgid "&Repeat password:"
-msgstr "再次輸入密碼(&R)："
-
-#. i18n: file ./kssl/keygenwizard2.ui line 49
-#: rc.cpp:9
-#, no-c-format
-msgid "&Choose password:"
-msgstr "選擇密碼(&C)："
-
-#. i18n: file ./kssl/keygenwizard.ui line 25
-#: rc.cpp:12
-#, no-c-format
-msgid ""
-"You have indicated that you wish to obtain or purchase a secure certificate. "
-"This wizard is intended to guide you through the procedure. You may cancel at "
-"any time, and this will abort the transaction."
-msgstr "您已指明您想要取得或者購買安全性憑證。此精靈將會引導您完成這個過程。您可在任何時候取消，從而中止此項事務。"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 91
-#: rc.cpp:15
-#, no-c-format
-msgid "Events"
-msgstr "事件"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 117
-#: rc.cpp:18
-#, no-c-format
-msgid "Quick Controls"
-msgstr "快速控制"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 128
-#: rc.cpp:21
-#, no-c-format
-msgid "Apply to &all applications"
-msgstr "套用到所有應用程式(&A)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 170
-#: rc.cpp:24
-#, no-c-format
-msgid "Turn O&ff All"
-msgstr "全部關閉(&F)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 173
-#: rc.cpp:27 rc.cpp:33
-#, no-c-format
-msgid "Allows you to change the behavior for all events at once"
-msgstr "允許您一次變更所有事件的行為"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 181
-#: rc.cpp:30
-#, no-c-format
-msgid "Turn O&n All"
-msgstr "全部開啟(&N)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 204
-#: rc.cpp:36 tdefile/kicondialog.cpp:330
-#, no-c-format
-msgid "Actions"
-msgstr "動作"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 215
-#: rc.cpp:39
-#, no-c-format
-msgid "Print a message to standard &error output"
-msgstr "列印訊息到標準錯誤輸出(&E)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 223
-#: rc.cpp:42
-#, no-c-format
-msgid "Show a &message in a pop-up window"
-msgstr "在快顯視窗中顯示訊息(&M)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 231
-#: rc.cpp:45
-#, no-c-format
-msgid "E&xecute a program:"
-msgstr "執行程式(&X):"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 247
-#: rc.cpp:48
-#, no-c-format
-msgid "Play a &sound:"
-msgstr "播放音效(&S)："
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 258
-#: rc.cpp:51
-#, no-c-format
-msgid "Test the Sound"
-msgstr "測試音效"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 268
-#: rc.cpp:54
-#, no-c-format
-msgid "Mark &taskbar entry"
-msgstr "標記工作列項目(&T)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 276
-#: rc.cpp:57
-#, no-c-format
-msgid "&Log to a file:"
-msgstr "記錄到檔案(&L):"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 352
-#: rc.cpp:60
-#, no-c-format
-msgid "&Use a passive window that does not interrupt other work"
-msgstr "使用一個不中斷其他作業的被動式視窗(&U)"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 378
-#: rc.cpp:63
-#, no-c-format
-msgid "Less Options"
-msgstr "較少選項"
-
-#. i18n: file ./tdefile/knotifywidgetbase.ui line 406
-#: rc.cpp:66
-#, no-c-format
-msgid "Player Settings"
-msgstr "播放器設定"
-
-#. i18n: file ./tdefile/kpropertiesmimetypebase.ui line 27
-#: rc.cpp:69
-#, no-c-format
-msgid "Select one or more file types to add:"
-msgstr "選擇一個或多個要加入的檔案類型："
-
-#. i18n: file ./tdefile/kpropertiesmimetypebase.ui line 36
-#: rc.cpp:72 rc.cpp:90
-#, no-c-format
-msgid "Mimetype"
-msgstr "Mime 類型"
-
-#. i18n: file ./tdefile/kpropertiesmimetypebase.ui line 47
-#: rc.cpp:75 rc.cpp:93
-#, no-c-format
-msgid "Description"
-msgstr "描述"
-
-#. i18n: file ./tdefile/kpropertiesmimetypebase.ui line 61
-#: rc.cpp:78
-#, no-c-format
-msgid ""
-"<qt>"
-"<p>Select one or more types of file that your application can handle here. This "
-"list is organized by <u>mimetypes</u>.</p>\n"
-"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
-"identifying the type of data based on filename extensions and correspondent <u>"
-"mimetypes</u>. Example: the \"bmp\" part that comes after the dot in flower.bmp "
-"indicates that it is a specific kind of image, <u>image/x-bmp</u>"
-". To know which application should open each type of file, the system should be "
-"informed about the abilities of each application to handle these extensions and "
-"mimetypes.</p>"
-msgstr ""
-"<qt>"
-"<p>從這裡選擇一或多個您的應用程式可以處理的檔案類型。這個列表是依照 <u>mime 類型</u> 排列的。</p>\n"
-"<p>MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 <u>mime 類型</u> "
-"的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他是一種特定種類的圖片， <u>image/x-bmp</u>"
-"。要了解哪一個應用程式用來開啟哪種類型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 44
-#: rc.cpp:82
-#, no-c-format
-msgid "&Supported file types:"
-msgstr "支援的檔案類型(&S):"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 52
-#: rc.cpp:85 rc.cpp:96
-#, no-c-format
-msgid ""
-"<qt>"
-"<p>This list should show the types of file that your application can handle. "
-"This list is organized by <u>mimetypes</u>.</p>\n"
-"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
-"identifying the type of data based on filename extensions and correspondent <u>"
-"mimetypes</u>. Example: the \"bmp\" part that comes after the dot in flower.bmp "
-"indicates that it is a specific kind of image, <u>image/x-bmp</u>"
-". To know which application should open each type of file, the system should be "
-"informed about the abilities of each application to handle these extensions and "
-"mimetypes.</p>\n"
-"<p>If you want to associate this application with one or more mimetypes that "
-"are not in this list, click on the button <b>Add</b> "
-"below. If there are one or more filetypes that this application cannot handle, "
-"you may want to remove them from the list clicking on the button <b>Remove</b> "
-"below.</p></qt>"
-msgstr ""
-"<qt>"
-"<p>這個清單應該顯示您的應用程式可以處理的檔案類型。這個列表是依照 <u>mime 類型</u> 排列的。</p>\n"
-"<p>MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 <u>mime 類型</u> "
-"的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他是一種特定種類的圖片， <u>image/x-bmp</u>"
-"。要了解哪一個應用程式用來開啟哪種類型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。</p>\n"
-"<p>如果你想要把這個應用程式關聯到一或多個列表中沒有的 mime 類型，請按下面的按鈕 <b>加入</b>"
-"。如果有一或多個此應用程式無法處理的檔案類型，您可能會想要按下面的 <b>移除</b> 按鈕來把它們從列表中移除。</p></qt>"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 103
-#: rc.cpp:101
-#, no-c-format
-msgid "&Name:"
-msgstr "名稱(&N):"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 109
-#: rc.cpp:104 rc.cpp:107
-#, no-c-format
-msgid ""
-"Type the name you want to give to this application here. This application will "
-"appear under this name in the applications menu and in the panel."
-msgstr "在這裡輸入您想要給這個應用程式的名稱。這個應用程式在應用程式選單以及面板中會以此名稱出現。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 125
-#: rc.cpp:110 tdefile/kurlbar.cpp:950
-#, no-c-format
-msgid "&Description:"
-msgstr "描述(&D)："
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 131
-#: rc.cpp:113 rc.cpp:116
-#, no-c-format
-msgid ""
-"Type the description of this application, based on its use, here. Examples: a "
-"dial up application (KPPP) would be \"Dial up tool\"."
-msgstr "在這裡輸入這個應用程式的描述，可根據它的用途。例如：一個撥號應用程式 (KPPP) 應該是「撥號工具」。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 147
-#: rc.cpp:119
-#, no-c-format
-msgid "Comm&ent:"
-msgstr "備註(&E):"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 153
-#: rc.cpp:122 rc.cpp:125
-#, no-c-format
-msgid "Type any comment you think is useful here."
-msgstr "在這裡輸入任何您認為有幫助的註解。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 169
-#: rc.cpp:128
-#, no-c-format
-msgid "Co&mmand:"
-msgstr "命令(&M):"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 186
-#: rc.cpp:131 rc.cpp:145
-#, no-c-format
-msgid ""
-"Type the command to start this application here.\n"
-"\n"
-"Following the command, you can have several place holders which will be "
-"replaced with the actual values when the actual program is run:\n"
-"%f - a single file name\n"
-"%F - a list of files; use for applications that can open several local files at "
-"once\n"
-"%u - a single URL\n"
-"%U - a list of URLs\n"
-"%d - the directory of the file to open\n"
-"%D - a list of directories\n"
-"%i - the icon\n"
-"%m - the mini-icon\n"
-"%c - the caption"
-msgstr ""
-"在這裡輸入啟動這個應用程式的指令。\n"
-"\n"
-"下列指令，你需要在實際程式執行時換上真實的數值：\n"
-"%f - 單一的檔案名稱\n"
-"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
-"%u - 單一的網址\n"
-"%U - 網址的清單\n"
-"%d - 要開啟的檔案的目錄\n"
-"%D - 目錄的清單\n"
-"%i - 圖示\n"
-"%m - 小型圖示\n"
-"%c - 說明"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 213
-#: rc.cpp:159 tdefile/kicondialog.cpp:283 tdefile/kpropertiesdialog.cpp:3715
-#, no-c-format
-msgid "&Browse..."
-msgstr "瀏覽(&B)..."
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 216
-#: rc.cpp:162
-#, no-c-format
-msgid ""
-"Click here to browse your file system in order to find the desired executable."
-msgstr "按這裡瀏覽您的檔案系統以找出想要的可執行檔。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 224
-#: rc.cpp:165
-#, no-c-format
-msgid "&Work path:"
-msgstr "工作路徑(&W):"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 230
-#: rc.cpp:168 rc.cpp:171
-#, no-c-format
-msgid "Sets the working directory for your application."
-msgstr "設定您的應用程式的工作目錄。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 246
-#: rc.cpp:174
-#, no-c-format
-msgid "Add..."
-msgstr "加入..."
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 249
-#: rc.cpp:177
-#, no-c-format
-msgid ""
-"Click on this button if you want to add a type of file (mimetype) that your "
-"application can handle."
-msgstr "如果你想要加入您的應用程式可以處理的檔案類型（mime 類型），請按這個按鈕。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 277
-#: rc.cpp:183
-#, no-c-format
-msgid ""
-"If you want to remove a type of file (mimetype) that your application cannot "
-"handle, select the mimetype in the list above and click on this button."
-msgstr "如果你想要移除您的應用程式不能處理的檔案類型（mime 類型），請在上面列表中選擇 mime 類型並且按這個按鈕。"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 302
-#: rc.cpp:186
-#, no-c-format
-msgid "Ad&vanced Options"
-msgstr "進階的選項(&V)"
-
-#. i18n: file ./tdefile/kpropertiesdesktopbase.ui line 305
-#: rc.cpp:189
-#, no-c-format
-msgid ""
-"Click here to modify the way this application will run, launch feedback, DCOP "
-"options or to run it as a different user."
-msgstr "按這裡修改執行這個應用程式的方式，啟動回饋、 DCOP 選項或者以不同的使用者執行它。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 16
-#: rc.cpp:192
-#, no-c-format
-msgid "TDE Wallet Wizard"
-msgstr "TDE 錢包服務"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 23
-#: rc.cpp:195
-#, no-c-format
-msgid "Introduction"
-msgstr "介紹"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 56
-#: rc.cpp:198
-#, no-c-format
-msgid "<u>TDEWallet</u> - The TDE Wallet System"
-msgstr "<u>TDEWallet</u> -  TDE 錢包系統"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 81
-#: rc.cpp:201
-#, no-c-format
-msgid ""
-"Welcome to TDEWallet, the TDE Wallet System.  TDEWallet allows you to store "
-"your passwords and other personal information on disk in an encrypted file, "
-"preventing others from viewing the information.  This wizard will tell you "
-"about TDEWallet and help you configure it for the first time."
-msgstr ""
-"歡迎使用 TDEWallet，TDE 的錢包系統。TDEWallet "
-"讓您可以將您的密碼和其他個人資訊以加密檔案的形式儲存在磁碟上，防止別人檢視這些資訊。這個精靈會告訴您關於 TDEWallet 並且協助您做初次的設定。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 112
-#: rc.cpp:204
-#, no-c-format
-msgid "&Basic setup (recommended)"
-msgstr "基本設定[建議的](&B)"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 123
-#: rc.cpp:207
-#, no-c-format
-msgid "&Advanced setup"
-msgstr "進階設定(&A)"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 180
-#: rc.cpp:213
-#, no-c-format
-msgid ""
-"The TDE Wallet system stores your data in a <i>wallet</i> "
-"file on your local hard disk.  The data is only written in encrypted form, "
-"presently using the blowfish algorithm with your password as the key.  When a "
-"wallet is opened, the wallet manager application will launch and display an "
-"icon in the system tray.  You can use this application to manage your wallets.  "
-"It even permits you to drag wallets and wallet contents, allowing you to easily "
-"copy a wallet to a remote system."
-msgstr ""
-"TDE 錢包系統將您的資料儲存在本地磁碟上的 <i>wallet</i> 檔案。該資料只會以加密的形式寫入，目前是使用 blowfish "
-"演算法（以您的密碼作為鑰匙）。當錢包開啟時，會執行錢包管理程式並在系統匣中顯示圖示。您可以使用這個應用程式來管理您的錢包。它甚至允許您拖放錢包和錢包的內容，讓您"
-"可以輕鬆的複製錢包到遠端系統。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 193
-#: rc.cpp:216
-#, no-c-format
-msgid "Password Selection"
-msgstr "密碼選擇"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 204
-#: rc.cpp:219
-#, no-c-format
-msgid ""
-"Various applications may attempt to use the TDE wallet to store passwords or "
-"other information such as web form data and cookies.  If you would like these "
-"applications to use the wallet, you must enable it now and choose a password.  "
-"The password you choose <i>cannot</i> be recovered if it is lost, and will "
-"allow anyone who knows it to obtain all the information contained in the "
-"wallet."
-msgstr ""
-"許多應用程式可能嘗試使用 TDE 錢包來儲存密碼或者其他資訊，像是網頁表單資料和 "
-"cookies。如果您想要讓這些應用程式使用錢包，你必須現在啟用它並且選擇一個密碼。如果您所選擇的密碼遺失了是<i>不能</i>"
-"復原的，並且將會讓任何知道它的人得以獲得錢包中所包含的所有資訊。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 234
-#: rc.cpp:222
-#, no-c-format
-msgid "Enter a new password:"
-msgstr "請輸入新的密碼："
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 251
-#: rc.cpp:225
-#, no-c-format
-msgid "Verify password:"
-msgstr "驗證密碼："
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 301
-#: rc.cpp:228
-#, no-c-format
-msgid "Yes, I wish to use the TDE wallet to store my personal information."
-msgstr "是的，我希望使用 TDE 錢包來儲存我的個人資訊。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 390
-#: rc.cpp:231
-#, no-c-format
-msgid "Security Level"
-msgstr "安全等級"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 401
-#: rc.cpp:234
-#, no-c-format
-msgid ""
-"The TDE Wallet system allows you to control the level of security of your "
-"personal data.  Some of these settings do impact usability.  While the default "
-"settings are generally acceptable for most users, you may wish to change some "
-"of them.  You may further tune these settings from the TDEWallet control "
-"module."
-msgstr ""
-"TDE 錢包系統讓您可以控制您個人資料的安全等級。這些設定時有些非常有用。預設的設定值是適合大多數的使用者，但是您可能希望改變其中某些部分。您往後仍然可以從 "
-"TDEWallet 控制模組中來改變這些設定值。"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 432
-#: rc.cpp:237
-#, no-c-format
-msgid "Store network passwords and local passwords in separate wallet files"
-msgstr "將網路密碼與本地端密碼儲存在不同的 wallet 檔案"
-
-#. i18n: file ./misc/tdewalletd/tdewalletwizard.ui line 440
-#: rc.cpp:240
-#, no-c-format
-msgid "Automatically close idle wallets"
-msgstr "自動關閉閒置的錢包"
-
-#. i18n: file ./misc/tdewalletd/kbetterthankdialogbase.ui line 60
-#: rc.cpp:243
-#, no-c-format
-msgid "Allow &Once"
-msgstr "允許一次(&O)"
-
-#. i18n: file ./misc/tdewalletd/kbetterthankdialogbase.ui line 71
-#: rc.cpp:246
-#, no-c-format
-msgid "Allow &Always"
-msgstr "允許永遠使用(&A)"
-
-#. i18n: file ./misc/tdewalletd/kbetterthankdialogbase.ui line 79
-#: rc.cpp:249
-#, no-c-format
-msgid "&Deny"
-msgstr "拒絕(&D)"
-
-#. i18n: file ./misc/tdewalletd/kbetterthankdialogbase.ui line 87
-#: rc.cpp:252
-#, no-c-format
-msgid "Deny &Forever"
-msgstr "永遠拒絕(&F)"
-
-#: tdefile/kopenwith.cpp:150
-msgid "Known Applications"
-msgstr "已知的應用程式"
-
-#: tdefile/kicondialog.cpp:332 tdefile/kopenwith.cpp:296
-msgid "Applications"
-msgstr "應用程式"
-
-#: tdefile/kopenwith.cpp:322
-msgid "Open With"
-msgstr "開啟用"
-
-#: tdefile/kopenwith.cpp:326
-msgid ""
-"<qt>Select the program that should be used to open <b>%1</b>"
-". If the program is not listed, enter the name or click the browse button.</qt>"
-msgstr "<qt>選取用來開啟 <b>%1</b> 的程式。如果程式不在清單中，請輸入程式名稱或按一下瀏覽按鈕。</qt>"
-
-#: tdefile/kopenwith.cpp:332
-msgid "Choose the name of the program with which to open the selected files."
-msgstr "選擇用來開啟選定檔案的程式名稱。"
-
-#: tdefile/kopenwith.cpp:353
-#, c-format
-msgid "Choose Application for %1"
-msgstr "為 %1 選擇應用程式"
-
-#: tdefile/kopenwith.cpp:354
-msgid ""
-"<qt>Select the program for the file type: <b>%1</b>. If the program is not "
-"listed, enter the name or click the browse button.</qt>"
-msgstr "<qt>選取開啟檔案類型 <b>%1</b> 使用的程式。如果要使用的程式不在清單中，請輸入程式名稱或按一下瀏覽按鈕。</qt>"
-
-#: tdefile/kopenwith.cpp:366
-msgid "Choose Application"
-msgstr "選擇應用程式"
-
-#: tdefile/kopenwith.cpp:367
-msgid ""
-"<qt>Select a program. If the program is not listed, enter the name or click the "
-"browse button.</qt>"
-msgstr "<qt>請選擇程式。如果所需程式不在清單中，請輸入程式名稱或按一下[瀏覽]按鈕。</qt>"
-
-#: tdefile/kopenwith.cpp:406
-msgid "Clear input field"
-msgstr "清除輸入區域"
-
-#: tdefile/kopenwith.cpp:436
-msgid ""
-"Following the command, you can have several place holders which will be "
-"replaced with the actual values when the actual program is run:\n"
-"%f - a single file name\n"
-"%F - a list of files; use for applications that can open several local files at "
-"once\n"
-"%u - a single URL\n"
-"%U - a list of URLs\n"
-"%d - the directory of the file to open\n"
-"%D - a list of directories\n"
-"%i - the icon\n"
-"%m - the mini-icon\n"
-"%c - the comment"
-msgstr ""
-"下列指令，你需要在實際程式執行時換上真實的數值：\n"
-"%f - 單一的檔案名稱\n"
-"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
-"%u - 單一的網址\n"
-"%U - 網址的清單\n"
-"%d - 要開啟的檔案的目錄\n"
-"%D - 目錄的清單\n"
-"%i - 圖示\n"
-"%m - 小型圖示\n"
-"%c - 註解"
-
-#: tdefile/kopenwith.cpp:469
-msgid "Run in &terminal"
-msgstr "於終端機執行(&T)"
-
-#: tdefile/kopenwith.cpp:480
-msgid "&Do not close when command exits"
-msgstr "當指令存在時不要關閉(&D)"
-
-#: tdefile/kopenwith.cpp:497
-msgid "&Remember application association for this type of file"
-msgstr "記住此類檔案的應用程式關聯(&R)"
-
-#: tdefile/kicondialog.cpp:241 tdefile/kicondialog.cpp:250
-msgid "Select Icon"
-msgstr "選擇圖示"
-
-#: tdefile/kicondialog.cpp:270
-msgid "Icon Source"
-msgstr "圖示來源"
-
-#: tdefile/kicondialog.cpp:276
-msgid "S&ystem icons:"
-msgstr "系統圖示(&Y):"
-
-#: tdefile/kicondialog.cpp:281
-msgid "O&ther icons:"
-msgstr "其他圖示(&T)："
-
-#: tdefile/kicondialog.cpp:293
-msgid "Clear Search"
-msgstr "清除搜尋"
-
-#: tdefile/kicondialog.cpp:297
-msgid "&Search:"
-msgstr "搜尋(&S):"
-
-#: tdefile/kicondialog.cpp:308
-msgid "Search interactively for icon names (e.g. folder)."
-msgstr "互動式搜尋圖示名稱（例如資料夾）。"
-
-#: tdefile/kicondialog.cpp:331
-msgid "Animations"
-msgstr "動畫"
-
-#: tdefile/kicondialog.cpp:333
-msgid "Categories"
-msgstr "類別"
-
-#: tdefile/kicondialog.cpp:334
-msgid "Devices"
-msgstr "裝置"
-
-#: tdefile/kicondialog.cpp:335
-msgid "Emblems"
-msgstr "符號"
-
-#: tdefile/kicondialog.cpp:336
-msgid "Emotes"
-msgstr "表情"
-
-#: tdefile/kicondialog.cpp:337
-msgid "Filesystems"
-msgstr "檔案系統"
-
-#: tdefile/kicondialog.cpp:338
-msgid "International"
-msgstr "國際"
-
-#: tdefile/kicondialog.cpp:339
-msgid "Mimetypes"
-msgstr "MIME 類型"
-
-#: tdefile/kicondialog.cpp:340
-msgid "Places"
-msgstr "地方"
-
-#: tdefile/kicondialog.cpp:341
-msgid "Status"
-msgstr "狀態"
-
-#: tdefile/kicondialog.cpp:589
-msgid "*.png *.xpm *.svg *.svgz|Icon Files (*.png *.xpm *.svg *.svgz)"
-msgstr "*.png *.xpm *.svg *.svgz|圖示檔案 (*.png *.xpm *.svg *.svgz)"
-
-#: bookmarks/kbookmarkmenu.cc:797 tdefile/kpropertiesdialog.cpp:992
-#: tdefile/kurlrequesterdlg.cpp:47
-msgid "Location:"
-msgstr "位置："
-
-#: tdefile/kacleditwidget.cpp:63 tdefile/kacleditwidget.cpp:421
-#: tdefile/tdefiledetailview.cpp:70
-msgid "Owner"
-msgstr "擁有者"
-
-#: tdefile/kacleditwidget.cpp:64 tdefile/kacleditwidget.cpp:423
-msgid "Owning Group"
-msgstr "擁有群組"
-
-#: tdefile/kacleditwidget.cpp:65 tdefile/kacleditwidget.cpp:425
-#: tdefile/kpropertiesdialog.cpp:2020
-msgid "Others"
-msgstr "其他"
-
-#: tdefile/kacleditwidget.cpp:66 tdefile/kacleditwidget.cpp:427
-msgid "Mask"
-msgstr "遮罩"
-
-#: tdefile/kacleditwidget.cpp:67 tdefile/kacleditwidget.cpp:429
-msgid "Named User"
-msgstr "已命名使用者"
-
-#: tdefile/kacleditwidget.cpp:68 tdefile/kacleditwidget.cpp:431
-msgid "Named Group"
-msgstr "已命名群組"
-
-#: tdefile/kacleditwidget.cpp:81
-msgid "Add Entry..."
-msgstr "新增項目..."
-
-#: tdefile/kacleditwidget.cpp:83
-msgid "Edit Entry..."
-msgstr "編輯項目..."
-
-#: tdefile/kacleditwidget.cpp:85
-msgid "Delete Entry"
-msgstr "刪除項目"
-
-#: tdefile/kacleditwidget.cpp:280
-msgid " (Default)"
-msgstr " (預設)"
-
-#: tdefile/kacleditwidget.cpp:397
-msgid "Edit ACL Entry"
-msgstr "編輯存取控制清單項目"
-
-#: tdefile/kacleditwidget.cpp:407
-msgid "Entry Type"
-msgstr "項目型態"
-
-#: tdefile/kacleditwidget.cpp:410
-msgid "Default for new files in this folder"
-msgstr "此資料夾新檔案的預設值"
-
-#: tdefile/kacleditwidget.cpp:446
-msgid "User: "
-msgstr "使用者："
-
-#: tdefile/kacleditwidget.cpp:450
-msgid "Group: "
-msgstr "群組："
-
-#: tdefile/kacleditwidget.cpp:563
-msgid "Type"
-msgstr "類型"
-
-#: tdefile/kacleditwidget.cpp:564 tdefile/tdefiledetailview.cpp:66
-msgid "Name"
-msgstr "名稱"
-
-#: tdefile/kacleditwidget.cpp:565
-msgid ""
-"_: read permission\n"
-"r"
-msgstr "r"
-
-#: tdefile/kacleditwidget.cpp:566
-msgid ""
-"_: write permission\n"
-"w"
-msgstr "w"
-
-#: tdefile/kacleditwidget.cpp:567
-msgid ""
-"_: execute permission\n"
-"x"
-msgstr "x"
-
-#: tdefile/kacleditwidget.cpp:568
-msgid "Effective"
-msgstr "有效"
-
-#: tdefile/tdefiledialog.cpp:1684 tdefile/tdefilefiltercombo.cpp:32
-msgid "*|All Files"
-msgstr "*|所有檔案"
-
-#: tdefile/tdefilefiltercombo.cpp:164
-msgid "All Supported Files"
-msgstr "所有支援的檔案"
-
-#: tdefile/tdefilemetainfowidget.cpp:111
-msgid "<Error>"
-msgstr "<錯誤>"
-
-#: tdefile/tdefilepreview.cpp:63
-msgid "Preview"
-msgstr "預覽"
-
-#: tdefile/tdefilepreview.cpp:69
-msgid "No preview available."
-msgstr "無法預覽。"
-
-#: tdefile/tdefileview.cpp:77
-msgid "Unknown View"
-msgstr "無法識別的檢視"
-
-#: tdefile/kpreviewprops.cpp:49
-msgid "P&review"
-msgstr "預覽(&R)"
-
-#: tdefile/tdefilespeedbar.cpp:49
-msgid "Desktop"
-msgstr "桌面"
-
-#: tdefile/tdefilespeedbar.cpp:56
-msgid "Documents"
-msgstr "文件"
-
-#: tdefile/tdediroperator.cpp:1264 tdefile/tdefilespeedbar.cpp:60
-msgid "Home Folder"
-msgstr "家資料夾"
-
-#: tdefile/tdefilespeedbar.cpp:65
-msgid "Storage Media"
-msgstr "儲存媒體"
-
-#: tdefile/tdefilespeedbar.cpp:100
-msgid "Downloads"
-msgstr ""
-
-#: tdefile/tdefilespeedbar.cpp:102
-msgid "Music"
-msgstr ""
-
-#: tdefile/tdefilespeedbar.cpp:104
-#, fuzzy
-msgid "Pictures"
-msgstr "所有圖片"
-
-#: tdefile/tdefilespeedbar.cpp:106
-msgid "Videos"
-msgstr ""
-
-#: tdefile/tdefilespeedbar.cpp:108
-msgid "Templates"
-msgstr ""
-
-#: tdefile/tdefilespeedbar.cpp:110
-#, fuzzy
-msgid "Public"
-msgstr "公開金鑰:"
-
-#: tdefile/tdefilespeedbar.cpp:115
-msgid "Network Folders"
-msgstr "網路資料夾"
-
-#: tdefile/kurlrequester.cpp:213
-msgid "Open file dialog"
-msgstr "開啟檔案對話方塊"
-
-#: tdefile/kmetaprops.cpp:130
-msgid "&Meta Info"
-msgstr "中繼資訊(&M)"
-
-#: tdefile/kdirselectdialog.cpp:90
-msgid "Select Folder"
-msgstr "選擇資料夾"
-
-#: tdefile/kdirselectdialog.cpp:92 tdefile/kdirselectdialog.cpp:125
-#: tdefile/tdediroperator.cpp:1269
-msgid "New Folder..."
-msgstr "新增資料夾..."
-
-#: tdefile/kdirselectdialog.cpp:109
-msgid "Folders"
-msgstr "資料夾"
-
-#: tdefile/kdirselectdialog.cpp:128
-msgid "Show Hidden Folders"
-msgstr "顯示隱藏的資料夾"
-
-#: tdefile/kdirselectdialog.cpp:407 tdefile/kdirselectdialog.cpp:411
-#: tdefile/tdediroperator.cpp:389 tdefile/tdediroperator.cpp:393
-msgid "New Folder"
-msgstr "新資料夾"
-
-#: tdefile/kdirselectdialog.cpp:412 tdefile/tdediroperator.cpp:394
-#, c-format
-msgid ""
-"Create new folder in:\n"
-"%1"
-msgstr ""
-"建立新資料夾於：\n"
-"%1"
-
-#: tdefile/kdirselectdialog.cpp:435 tdefile/tdediroperator.cpp:422
-msgid "A file or folder named %1 already exists."
-msgstr "名為 %1 的檔案或資料夾已經存在。"
-
-#: tdefile/kdirselectdialog.cpp:439 tdefile/tdediroperator.cpp:426
-msgid "You do not have permission to create that folder."
-msgstr "您沒有權限建立該資料夾。"
-
-#: tdefile/tdefilesharedlg.cpp:58
-msgid "&Share"
-msgstr "共用(&S)"
-
-#: tdefile/tdefilesharedlg.cpp:143
-msgid "Only folders in your home folder can be shared."
-msgstr "只可共用您家目錄中的資料夾。"
-
-#: tdefile/tdefilesharedlg.cpp:154
-msgid "Not shared"
-msgstr "不共用"
-
-#: tdefile/tdefilesharedlg.cpp:159
-msgid "Shared - read only for others"
-msgstr ""
-
-#: tdefile/tdefilesharedlg.cpp:164
-msgid "Shared - writeable for others"
-msgstr ""
-
-#: tdefile/tdefilesharedlg.cpp:186
-msgid ""
-"Sharing this folder makes it available under Linux/UNIX (NFS) and Windows "
-"(Samba)."
-msgstr "共用這個目錄，將使它可以在 Linux/UNIX (NFS) 和 Windows (Samba) 中存取。"
-
-#: tdefile/tdefilesharedlg.cpp:192
-msgid "You can also reconfigure file sharing authorization."
-msgstr "您還可以重新設定檔案共用的授權。"
-
-#: tdefile/tdefilesharedlg.cpp:195 tdefile/tdefilesharedlg.cpp:222
-msgid "Configure File Sharing..."
-msgstr "設定檔案共用..."
-
-#: tdefile/tdefilesharedlg.cpp:207
-msgid ""
-"Error running 'filesharelist'. Check if installed and in $PATH or /usr/sbin."
-msgstr "執行「filesharelist」出錯。請檢查該程式是否已經安裝在 $PATH 或 /usr/sbin 中。"
-
-#: tdefile/tdefilesharedlg.cpp:214
-msgid "You need to be authorized to share folders."
-msgstr "您需要獲得授權才可以共用資料夾。"
-
-#: tdefile/tdefilesharedlg.cpp:217
-msgid "File sharing is disabled."
-msgstr "檔案分享已停用。"
-
-#: tdefile/tdefilesharedlg.cpp:282
-msgid "Sharing folder '%1' failed."
-msgstr "分享資料夾「%1」失敗。"
-
-#: tdefile/tdefilesharedlg.cpp:283
-msgid ""
-"An error occurred while trying to share folder '%1'. Make sure that the Perl "
-"script 'fileshareset' is set suid root."
-msgstr "當嘗試分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設定 suid 為 root。"
-
-#: tdefile/tdefilesharedlg.cpp:288
-msgid "Unsharing folder '%1' failed."
-msgstr "取消分享資料夾「%1」失敗。"
-
-#: tdefile/tdefilesharedlg.cpp:289
-msgid ""
-"An error occurred while trying to unshare folder '%1'. Make sure that the Perl "
-"script 'fileshareset' is set suid root."
-msgstr "當嘗試取消分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設定 suid 為 root。"
-
-#: tdefile/kurlbar.cpp:352
-msgid ""
-"<qt>The <b>Quick Access</b> panel provides easy access to commonly used file "
-"locations."
-"<p>Clicking on one of the shortcut entries will take you to that location."
-"<p>By right clicking on an entry you can add, edit and remove shortcuts.</qt>"
-msgstr ""
-"<qt><b>快速存取</b>面板提供對常使用檔案位置的簡易存取方式。"
-"<p>按下捷徑項目之一會把您帶到該位置。"
-"<p>在項目上按右鍵則可以加入、編輯和移除捷徑。</qt>"
-
-#: tdefile/kurlbar.cpp:620
-#, fuzzy
-msgid "Desktop Search"
-msgstr "桌面"
-
-#: tdefile/kurlbar.cpp:745
-msgid "&Large Icons"
-msgstr "大圖示(&L)"
-
-#: tdefile/kurlbar.cpp:745
-msgid "&Small Icons"
-msgstr "小圖示(&S)"
-
-#: tdefile/kurlbar.cpp:751
-msgid "&Edit Entry..."
-msgstr "編輯項目(&E)..."
-
-#: tdefile/kurlbar.cpp:755
-msgid "&Add Entry..."
-msgstr "新增項目(&A)..."
-
-#: tdefile/kurlbar.cpp:759
-msgid "&Remove Entry"
-msgstr "移除項目(&R)"
-
-#: tdefile/kurlbar.cpp:791
-msgid "Enter a description"
-msgstr "輸入描述"
-
-#: tdefile/kurlbar.cpp:937
-msgid "Edit Quick Access Entry"
-msgstr "編輯快速存取項目"
-
-#: tdefile/kurlbar.cpp:940
-msgid ""
-"<qt><b>Please provide a description, URL and icon for this Quick Access "
-"entry.</b></br></qt>"
-msgstr "<qt><b>請為此快速存取項目提供描述、URL 和圖示。</b</br></qt>"
-
-#: tdefile/kurlbar.cpp:947
-msgid ""
-"<qt>This is the text that will appear in the Quick Access panel."
-"<p>The description should consist of one or two words that will help you "
-"remember what this entry refers to.</qt>"
-msgstr "<qt>這是會顯示在快速存取面板中的文字。<p>此描述應該是一或兩個字的組合以協助您記得這個項目參考到何處。</qt>"
-
-#: tdefile/kurlbar.cpp:957
-#, fuzzy
-msgid ""
-"<qt>This is the location associated with the entry. Any valid URL may be used. "
-"For example:"
-"<p>%1"
-"<br>http://www.trinitydesktop.org"
-"<p>By clicking on the button next to the text edit box you can browse to an "
-"appropriate URL.</qt>"
-msgstr ""
-"<qt>這是此項目所關聯的位置。可以使用任何有效的網址。例如："
-"<p>%1"
-"<br>http://www.kde.org"
-"<br>ftp://ftp.kde.org/pub/kde/stable"
-"<p>按下文字編輯方塊旁邊的按鈕可以讓您瀏覽合適的網址。</qt>"
-
-#: tdefile/kurlbar.cpp:961
-msgid "&URL:"
-msgstr "URL(&U):"
-
-#: tdefile/kurlbar.cpp:968
-msgid ""
-"<qt>This is the icon that will appear in the Quick Access panel."
-"<p>Click on the button to select a different icon.</qt>"
-msgstr "<qt>這是會顯示在快速存取面板中的圖示。<p>按下按鈕以選擇不同的圖示。</qt>"
-
-#: tdefile/kurlbar.cpp:970
-msgid "Choose an &icon:"
-msgstr "選擇圖示(&I)："
-
-#: tdefile/kurlbar.cpp:986
-msgid "&Only show when using this application (%1)"
-msgstr "只在使用這個應用程式 (%1) 時顯示(&O)"
-
-#: tdefile/kurlbar.cpp:989
-msgid ""
-"<qt>Select this setting if you want this entry to show only when using the "
-"current application (%1)."
-"<p>If this setting is not selected, the entry will be available in all "
-"applications.</qt>"
-msgstr ""
-"<qt>如果您希望這個項目只在使用目前的應用程式 (%1) 時顯示，請選擇此設定。\n"
-"<p>如果沒有選取這項設定，該項目將在所有應用程式中顯示。</qt>"
-
-#: tdefile/kimagefilepreview.cpp:53
-msgid "&Automatic preview"
-msgstr "自動預覽(&A)"
-
-#: tdefile/kimagefilepreview.cpp:58
-msgid "&Preview"
-msgstr "預覽(&P)"
-
-#: tdefile/kcustommenueditor.cpp:88
-msgid "Menu Editor"
-msgstr "選單編輯器"
-
-#: tdefile/kcustommenueditor.cpp:94 tdefile/tdediroperator.cpp:1258
-msgid "Menu"
-msgstr "選單"
-
-#: tdefile/kcustommenueditor.cpp:98
-msgid "New..."
-msgstr "新增..."
-
-#: tdefile/kcustommenueditor.cpp:100
-msgid "Move Up"
-msgstr "向上移動"
-
-#: tdefile/kcustommenueditor.cpp:101
-msgid "Move Down"
-msgstr "向下移動"
-
-#: tdefile/tdefileiconview.cpp:63
-msgid "Small Icons"
-msgstr "小圖示"
-
-#: tdefile/tdefileiconview.cpp:68
-msgid "Large Icons"
-msgstr "大圖示"
-
-#: tdefile/tdefileiconview.cpp:76
-msgid "Thumbnail Previews"
-msgstr "圖示預覽"
-
-#: tdefile/tdefileiconview.cpp:120
-msgid "Icon View"
-msgstr "圖示檢視"
-
-#: tdefile/kpropertiesdialog.cpp:177 tdefile/kpropertiesdialog.cpp:193
-#: tdefile/kpropertiesdialog.cpp:209 tdefile/kpropertiesdialog.cpp:232
-#: tdefile/kpropertiesdialog.cpp:252 tdefile/kpropertiesdialog.cpp:272
-#, c-format
-msgid "Properties for %1"
-msgstr "%1 的內容"
-
-#: tdefile/kpropertiesdialog.cpp:208
-#, c-format
-msgid ""
-"_n: <never used>\n"
-"Properties for %n Selected Items"
-msgstr "%n 個選取項目的屬性"
-
-#: tdefile/kpropertiesdialog.cpp:748
-msgid "&General"
-msgstr "一般(&G)"
-
-#: tdefile/kpropertiesdialog.cpp:968
-msgid "Create new file type"
-msgstr "建立新檔案型態"
-
-#: tdefile/kpropertiesdialog.cpp:970
-msgid "Edit file type"
-msgstr "編輯檔案類型"
-
-#: tdefile/kpropertiesdialog.cpp:983
-msgid "Contents:"
-msgstr "內容："
-
-#: tdefile/kpropertiesdialog.cpp:1025
-msgid "Calculate"
-msgstr "計算"
-
-#: tdefile/kpropertiesdialog.cpp:1036 tdefile/kpropertiesdialog.cpp:1263
-msgid "Refresh"
-msgstr "更新"
-
-#: tdefile/kpropertiesdialog.cpp:1044
-msgid "Points to:"
-msgstr "指向："
-
-#: tdefile/kpropertiesdialog.cpp:1058
-msgid "Created:"
-msgstr "建立時間："
-
-#: tdefile/kpropertiesdialog.cpp:1080
-msgid "Accessed:"
-msgstr "存取時間："
-
-#: tdefile/kpropertiesdialog.cpp:1099
-msgid "Mounted on:"
-msgstr "掛載點:"
-
-#: tdefile/kpropertiesdialog.cpp:1106 tdefile/kpropertiesdialog.cpp:2968
-msgid "Free disk space:"
-msgstr "可用的磁碟空間："
-
-#: tdefile/kpropertiesdialog.cpp:1213 tdefile/kpropertiesdialog.cpp:1228
-#: tdefile/kpropertiesdialog.cpp:3128
-#, no-c-format
-msgid ""
-"_: Available space out of total partition size (percent used)\n"
-"%1 out of %2 (%3% used)"
-msgstr "%1/%2 (%3% 已使用)"
-
-#: tdefile/kpropertiesdialog.cpp:1239
-msgid ""
-"Calculating... %1 (%2)\n"
-"%3, %4"
-msgstr ""
-"計算中... %1 (%2)\n"
-"%3, %4"
-
-#: tdefile/kpropertiesdialog.cpp:1242 tdefile/kpropertiesdialog.cpp:1258
-#, c-format
-msgid ""
-"_n: 1 file\n"
-"%n files"
-msgstr "%n 個檔案"
-
-#: tdefile/kpropertiesdialog.cpp:1243 tdefile/kpropertiesdialog.cpp:1259
-#, c-format
-msgid ""
-"_n: 1 sub-folder\n"
-"%n sub-folders"
-msgstr "%n 個子資料夾"
-
-#: tdefile/kpropertiesdialog.cpp:1272
-msgid "Calculating..."
-msgstr "計算中..."
-
-#: tdefile/kpropertiesdialog.cpp:1306
-msgid "Stopped"
-msgstr "已停止"
-
-#: tdefile/kpropertiesdialog.cpp:1347
-msgid "The new file name is empty."
-msgstr "新的檔案名稱是空的。"
-
-#: tdefile/kpropertiesdialog.cpp:1489 tdefile/kpropertiesdialog.cpp:2685
-#: tdefile/kpropertiesdialog.cpp:2701 tdefile/kpropertiesdialog.cpp:2858
-#: tdefile/kpropertiesdialog.cpp:3156 tdefile/kpropertiesdialog.cpp:3440
-#: tdefile/kpropertiesdialog.cpp:3936 tdefile/kpropertiesdialog.cpp:4179
-msgid ""
-"<qt>Could not save properties. You do not have sufficient access to write to <b>"
-"%1</b>.</qt>"
-msgstr "<qt>無法儲存內容。您沒有足夠的存取權來寫入 <b>%1</b>。</qt>"
-
-#: tdefile/kpropertiesdialog.cpp:1563 tdefile/kpropertiesdialog.cpp:1567
-#: tdefile/kpropertiesdialog.cpp:1572
-msgid "Forbidden"
-msgstr "被禁止"
-
-#: tdefile/kpropertiesdialog.cpp:1564
-msgid "Can Read"
-msgstr "可讀取"
-
-#: tdefile/kpropertiesdialog.cpp:1565
-msgid "Can Read & Write"
-msgstr "可讀取 & 寫入"
-
-#: tdefile/kpropertiesdialog.cpp:1568
-msgid "Can View Content"
-msgstr "可檢視內容"
-
-#: tdefile/kpropertiesdialog.cpp:1569
-msgid "Can View & Modify Content"
-msgstr "可以檢視 & 修改內容"
-
-#: tdefile/kpropertiesdialog.cpp:1573
-msgid "Can View Content & Read"
-msgstr "可以檢視內容 & 讀取"
-
-#: tdefile/kpropertiesdialog.cpp:1574
-msgid "Can View/Read & Modify/Write"
-msgstr "可以檢視/讀取 & 修改/寫入"
-
-#: tdefile/kpropertiesdialog.cpp:1668
-msgid "&Permissions"
-msgstr "權限(&P)"
-
-#: tdefile/kpropertiesdialog.cpp:1679 tdefile/kpropertiesdialog.cpp:1944
-msgid "Access Permissions"
-msgstr "存取權限"
-
-#: tdefile/kpropertiesdialog.cpp:1690
-msgid ""
-"_n: This file is a link and does not have permissions.\n"
-"All files are links and do not have permissions."
-msgstr "所有的檔案都是連結而沒有權限。"
-
-#: tdefile/kpropertiesdialog.cpp:1693
-msgid "Only the owner can change permissions."
-msgstr "只有擁有者可以變更權限。"
-
-#: tdefile/kpropertiesdialog.cpp:1696
-msgid "O&wner:"
-msgstr "擁有者(&W):"
-
-#: tdefile/kpropertiesdialog.cpp:1702
-msgid "Specifies the actions that the owner is allowed to do."
-msgstr "指定擁有者被允許進行的動作。"
-
-#: tdefile/kpropertiesdialog.cpp:1704
-msgid "Gro&up:"
-msgstr "群組(&U):"
-
-#: tdefile/kpropertiesdialog.cpp:1710
-msgid "Specifies the actions that the members of the group are allowed to do."
-msgstr "指定群組的成員被允許進行的動作。"
-
-#: tdefile/kpropertiesdialog.cpp:1712
-msgid "O&thers:"
-msgstr "其他(&T):"
-
-#: tdefile/kpropertiesdialog.cpp:1718
-msgid ""
-"Specifies the actions that all users, who are neither owner nor in the group, "
-"are allowed to do."
-msgstr "指定所有既非擁有者也不在群組中的使用者被允許進行的動作。"
-
-#: tdefile/kpropertiesdialog.cpp:1723
-msgid "Only own&er can rename and delete folder content"
-msgstr "只有擁有者可以重新命名與刪除資料夾內容(&E)"
-
-#: tdefile/kpropertiesdialog.cpp:1724
-msgid "Is &executable"
-msgstr "是可執行檔(&E)"
-
-#: tdefile/kpropertiesdialog.cpp:1728
-msgid ""
-"Enable this option to allow only the folder's owner to delete or rename the "
-"contained files and folders. Other users can only add new files, which requires "
-"the 'Modify Content' permission."
-msgstr "啟用此選項將指允許資料夾的擁有者可以刪除或重新命名包含的檔案與資料夾。其他的使用者只能加入新的檔案，但必須具有「編輯內容」的權限。"
-
-#: tdefile/kpropertiesdialog.cpp:1732
-msgid ""
-"Enable this option to mark the file as executable. This only makes sense for "
-"programs and scripts. It is required when you want to execute them."
-msgstr "啟用此選項會將檔案標示為可執行。這只對程式與命令稿有意義。當您要執行它們的時候，這是必須的。"
-
-#: tdefile/kpropertiesdialog.cpp:1739
-msgid "A&dvanced Permissions"
-msgstr "進階的權限(&D)"
-
-#: tdefile/kpropertiesdialog.cpp:1748
-msgid "Ownership"
-msgstr "擁有權"
-
-#: tdefile/kpropertiesdialog.cpp:1757
-msgid "User:"
-msgstr "使用者："
-
-#: tdefile/kpropertiesdialog.cpp:1847
-msgid "Group:"
-msgstr "群組："
-
-#: tdefile/kpropertiesdialog.cpp:1889
-msgid "Apply changes to all subfolders and their contents"
-msgstr "套用改變到所有的子資料夾和它們的內容"
-
-#: tdefile/kpropertiesdialog.cpp:1934
-msgid "Advanced Permissions"
-msgstr "進階的權限"
-
-#: tdefile/kpropertiesdialog.cpp:1953
-msgid "Class"
-msgstr "類別"
-
-#: tdefile/kpropertiesdialog.cpp:1958
-msgid ""
-"Show\n"
-"Entries"
-msgstr ""
-"顯示\n"
-"項目"
-
-#: tdefile/kpropertiesdialog.cpp:1960
-msgid "Read"
-msgstr "讀取"
-
-#: tdefile/kpropertiesdialog.cpp:1965
-msgid "This flag allows viewing the content of the folder."
-msgstr "這個旗標允許檢視此資料夾的內容。"
-
-#: tdefile/kpropertiesdialog.cpp:1967
-msgid "The Read flag allows viewing the content of the file."
-msgstr "讀取旗標允許檢視這個檔案的內容。"
-
-#: tdefile/kpropertiesdialog.cpp:1971
-msgid ""
-"Write\n"
-"Entries"
-msgstr ""
-"寫入\n"
-"項目"
-
-#: tdefile/kpropertiesdialog.cpp:1973
-msgid "Write"
-msgstr "寫入"
-
-#: tdefile/kpropertiesdialog.cpp:1978
-msgid ""
-"This flag allows adding, renaming and deleting of files. Note that deleting and "
-"renaming can be limited using the Sticky flag."
-msgstr "這個旗標允許加入、重新命名與刪除檔案。注意刪除與重新命名可以使用相黏旗標來限制。"
-
-#: tdefile/kpropertiesdialog.cpp:1981
-msgid "The Write flag allows modifying the content of the file."
-msgstr "寫入旗標允許修改這個檔案的內容。"
-
-#: tdefile/kpropertiesdialog.cpp:1986
-msgid ""
-"_: Enter folder\n"
-"Enter"
-msgstr "進入"
-
-#: tdefile/kpropertiesdialog.cpp:1987
-msgid "Enable this flag to allow entering the folder."
-msgstr "啟用這個旗標已允許進入此資料夾。"
-
-#: tdefile/kpropertiesdialog.cpp:1990
-msgid "Exec"
-msgstr "執行"
-
-#: tdefile/kpropertiesdialog.cpp:1991
-msgid "Enable this flag to allow executing the file as a program."
-msgstr "啟用這個旗標將允許這檔案像程式一樣執行。"
-
-#: tdefile/kpropertiesdialog.cpp:2001
-msgid "Special"
-msgstr "特殊屬性"
-
-#: tdefile/kpropertiesdialog.cpp:2005
-msgid ""
-"Special flag. Valid for the whole folder, the exact meaning of the flag can be "
-"seen in the right hand column."
-msgstr "特殊的旗標。對整個資料夾都有效，這個旗標精確的意思可以在右手邊的欄位看到。"
-
-#: tdefile/kpropertiesdialog.cpp:2008
-msgid ""
-"Special flag. The exact meaning of the flag can be seen in the right hand "
-"column."
-msgstr "特殊的旗標。這個旗標精確的意思可以在右手邊的欄位看到。"
-
-#: tdefile/kpropertiesdialog.cpp:2012
-msgid "User"
-msgstr "使用者"
-
-#: tdefile/kpropertiesdialog.cpp:2016 tdefile/tdefiledetailview.cpp:71
-msgid "Group"
-msgstr "群組"
-
-#: tdefile/kpropertiesdialog.cpp:2024
-msgid "Set UID"
-msgstr "SUID"
-
-#: tdefile/kpropertiesdialog.cpp:2028
-msgid ""
-"If this flag is set, the owner of this folder will be the owner of all new "
-"files."
-msgstr "如果設定這個旗標，此資料夾的擁有者將會成為所有新檔案的擁有者。"
-
-#: tdefile/kpropertiesdialog.cpp:2031
-msgid ""
-"If this file is an executable and the flag is set, it will be executed with the "
-"permissions of the owner."
-msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以擁有者的權限執行。"
-
-#: tdefile/kpropertiesdialog.cpp:2035
-msgid "Set GID"
-msgstr "SGID"
-
-#: tdefile/kpropertiesdialog.cpp:2039
-msgid ""
-"If this flag is set, the group of this folder will be set for all new files."
-msgstr "如果設定這個旗標，此資料夾的群組將會設定到所有新檔案。"
-
-#: tdefile/kpropertiesdialog.cpp:2042
-msgid ""
-"If this file is an executable and the flag is set, it will be executed with the "
-"permissions of the group."
-msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以群組的權限執行。"
-
-#: tdefile/kpropertiesdialog.cpp:2046
-msgid ""
-"_: File permission\n"
-"Sticky"
-msgstr "相黏"
-
-#: tdefile/kpropertiesdialog.cpp:2050
-msgid ""
-"If the Sticky flag is set on a folder, only the owner and root can delete or "
-"rename files. Otherwise everybody with write permissions can do this."
-msgstr "如果在資料夾上設定相黏旗標，只有擁有者和 root 可以刪除或重新命名檔案。否則任何具有寫入權限的人都可以進行此項動作。"
-
-#: tdefile/kpropertiesdialog.cpp:2054
-msgid ""
-"The Sticky flag on a file is ignored on Linux, but may be used on some systems"
-msgstr "在檔案上的相黏旗標會被 Linux 忽略，但是可能會被某些系統使用"
-
-#: tdefile/kpropertiesdialog.cpp:2241
-msgid "Link"
-msgstr "連結"
-
-#: tdefile/kpropertiesdialog.cpp:2257
-msgid "Varying (No Change)"
-msgstr "變化（沒有改變）"
-
-#: tdefile/kpropertiesdialog.cpp:2356
-msgid ""
-"_n: This file uses advanced permissions\n"
-"These files use advanced permissions."
-msgstr "這些檔案使用進階的權限。"
-
-#: tdefile/kpropertiesdialog.cpp:2377
-msgid ""
-"_n: This folder uses advanced permissions.\n"
-"These folders use advanced permissions."
-msgstr "這些資料夾使用進階的權限。"
-
-#: tdefile/kpropertiesdialog.cpp:2392
-msgid "These files use advanced permissions."
-msgstr "這些檔案使用進階的權限。"
-
-#: tdefile/kpropertiesdialog.cpp:2608
-msgid "U&RL"
-msgstr "URL(&R)"
-
-#: tdefile/kpropertiesdialog.cpp:2745
-msgid "A&ssociation"
-msgstr "關聯(&S)"
-
-#: tdefile/kpropertiesdialog.cpp:2754
-msgid "Pattern ( example: *.html;*.htm )"
-msgstr "型樣 ( 範例: *.html;*.htm )"
-
-#: tdefile/kpropertiesdialog.cpp:2787
-msgid "Left click previews"
-msgstr "按左鍵預覽"
-
-#: tdefile/kpropertiesdialog.cpp:2906
-msgid "De&vice"
-msgstr "裝置(&V)"
-
-#: tdefile/kpropertiesdialog.cpp:2936
-msgid "Device (/dev/fd0):"
-msgstr "裝置 (/dev/fd0)："
-
-#: tdefile/kpropertiesdialog.cpp:2937
-msgid "Device:"
-msgstr "裝置："
-
-#: tdefile/kpropertiesdialog.cpp:2947
-msgid "Read only"
-msgstr "唯讀"
-
-#: tdefile/kpropertiesdialog.cpp:2951
-msgid "File system:"
-msgstr "檔案系統:"
-
-#: tdefile/kpropertiesdialog.cpp:2959
-msgid "Mount point (/mnt/floppy):"
-msgstr "裝載點 (/mnt/floppy)："
-
-#: tdefile/kpropertiesdialog.cpp:2960
-msgid "Mount point:"
-msgstr "裝載點："
-
-#: tdefile/kpropertiesdialog.cpp:2991
-msgid "Unmounted Icon"
-msgstr "已卸載裝置圖示"
-
-#: tdefile/kpropertiesdialog.cpp:3188 tdefile/kpropertiesdialog.cpp:3996
-msgid "&Application"
-msgstr "應用程式(&A)"
-
-#: tdefile/kpropertiesdialog.cpp:3313
-#, c-format
-msgid "Add File Type for %1"
-msgstr "加入 %1 的檔案類型"
-
-#: bookmarks/kbookmarkmenu.cc:829 tdefile/kpropertiesdialog.cpp:3316
-msgid "&Add"
-msgstr "新增(&A)"
-
-#: tdefile/kpropertiesdialog.cpp:3317 tdefile/kpropertiesdialog.cpp:3318
-msgid ""
-"Add the selected file types to\n"
-"the list of supported file types."
-msgstr ""
-"將選擇的檔案類型加入到\n"
-"支援的檔案類型列表。"
-
-#: tdefile/kpropertiesdialog.cpp:3512 tdefile/kpropertiesdialog.cpp:3968
-msgid "Only executables on local file systems are supported."
-msgstr "只支援本地檔案系統的執行檔。"
-
-#: tdefile/kpropertiesdialog.cpp:3524
-#, c-format
-msgid "Advanced Options for %1"
-msgstr "%1 的進階選項"
-
-#: tdefile/kpropertiesdialog.cpp:3683
-msgid "E&xecute"
-msgstr "執行(&X)"
-
-#: tdefile/kpropertiesdialog.cpp:3690
-msgid "Comman&d:"
-msgstr "命令(&D)："
-
-#: tdefile/kpropertiesdialog.cpp:3699
-msgid ""
-"Following the command, you can have several place holders which will be "
-"replaced with the actual values when the actual program is run:\n"
-"%f - a single file name\n"
-"%F - a list of files; use for applications that can open several local files at "
-"once\n"
-"%u - a single URL\n"
-"%U - a list of URLs\n"
-"%d - the folder of the file to open\n"
-"%D - a list of folders\n"
-"%i - the icon\n"
-"%m - the mini-icon\n"
-"%c - the caption"
-msgstr ""
-"下列指令，你需要在實際程式執行時換上真實的數值：\n"
-"%f - 單一的檔案名稱\n"
-"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
-"%u - 單一的網址\n"
-"%U - 網址的清單\n"
-"%d - 要開啟的檔案的目錄\n"
-"%D - 目錄的清單\n"
-"%i - 圖示\n"
-"%m - 小型圖示\n"
-"%c - 說明"
-
-#: tdefile/kpropertiesdialog.cpp:3720
-msgid "Panel Embedding"
-msgstr "嵌入面板"
-
-#: tdefile/kpropertiesdialog.cpp:3729
-msgid "&Execute on click:"
-msgstr "按下後執行(&E)："
-
-#: tdefile/kpropertiesdialog.cpp:3737
-msgid "&Window title:"
-msgstr "視窗標題(&W)："
-
-#: tdefile/kpropertiesdialog.cpp:3757
-msgid "&Run in terminal"
-msgstr "在終端機執行(&R)"
-
-#: tdefile/kpropertiesdialog.cpp:3772
-msgid "Do not &close when command exits"
-msgstr "當指令結束時不要關閉(&C)"
-
-#: tdefile/kpropertiesdialog.cpp:3776
-msgid "&Terminal options:"
-msgstr "終端機選項(&T)："
-
-#: tdefile/kpropertiesdialog.cpp:3796
-msgid "Ru&n as a different user"
-msgstr "以不同使用者身份執行(&N)"
-
-#: tdefile/kpropertiesdialog.cpp:4037
-msgid "Description:"
-msgstr "描述："
-
-#: tdefile/kpropertiesdialog.cpp:4043
-msgid "Comment:"
-msgstr "備註："
-
-#: tdefile/kpropertiesdialog.cpp:4049
-msgid "File types:"
-msgstr "檔案類型："
-
-#: tdefile/knotifydialog.cpp:81
-msgid "Sounds"
-msgstr "聲音"
-
-#: tdefile/knotifydialog.cpp:82
-msgid "Logging"
-msgstr "記錄"
-
-#: tdefile/knotifydialog.cpp:83
-msgid "Program Execution"
-msgstr "程式執行"
-
-#: tdefile/knotifydialog.cpp:84
-msgid "Message Windows"
-msgstr "訊息視窗"
-
-#: tdefile/knotifydialog.cpp:85
-msgid "Passive Windows"
-msgstr "被動視窗"
-
-#: tdefile/knotifydialog.cpp:86
-msgid "Standard Error Output"
-msgstr "標準錯誤輸出"
-
-#: tdefile/knotifydialog.cpp:87
-msgid "Taskbar"
-msgstr "工作列"
-
-#: tdefile/knotifydialog.cpp:121
-msgid "Execute a program"
-msgstr "執行程式"
-
-#: tdefile/knotifydialog.cpp:122
-msgid "Print to Standard error output"
-msgstr "列印訊息到標準錯誤輸出"
-
-#: tdefile/knotifydialog.cpp:123
-msgid "Display a messagebox"
-msgstr "顯示訊息方塊"
-
-#: tdefile/knotifydialog.cpp:124
-msgid "Log to a file"
-msgstr "記錄到檔案"
-
-#: tdefile/knotifydialog.cpp:125
-msgid "Play a sound"
-msgstr "播放音效"
-
-#: tdefile/knotifydialog.cpp:126
-msgid "Flash the taskbar entry"
-msgstr "更新工作列項目"
-
-#: tdefile/knotifydialog.cpp:163
-msgid "Notification Settings"
-msgstr "通知設定"
-
-#: tdefile/knotifydialog.cpp:309
-msgid ""
-"<qt>You may use the following macros"
-"<br>in the commandline:"
-"<br><b>%e</b>: for the event name,"
-"<br><b>%a</b>: for the name of the application that sent the event,"
-"<br><b>%s</b>: for the notification message,"
-"<br><b>%w</b>: for the numeric window ID where the event originated,"
-"<br><b>%i</b>: for the numeric event ID."
-msgstr ""
-"<qt>您可以將下列巨集"
-"<br>用在命令列中："
-"<br><b>%e</b>：為事件名稱，"
-"<br><b>%a</b>：為送出該事件的應用程式名稱，"
-"<br><b>%s</b>：為通知訊息，"
-"<br><b>%w</b>：為事件出現的視窗數字 ID ，"
-"<br><b>%i</b>：為數字式的事件 ID。"
-
-#: tdefile/knotifydialog.cpp:339
-msgid "Advanced <<"
-msgstr "進階 <<"
-
-#: tdefile/knotifydialog.cpp:340
-msgid "Hide advanced options"
-msgstr "隱藏進階選項"
-
-#: tdefile/knotifydialog.cpp:356
-msgid "Advanced >>"
-msgstr "進階 >>"
-
-#: tdefile/knotifydialog.cpp:357
-msgid "Show advanced options"
-msgstr "顯示進階選項"
-
-#: tdefile/knotifydialog.cpp:782
-msgid "This will cause the notifications to be reset to their defaults."
-msgstr "這樣將導致通知被重設為預設值。"
-
-#: tdefile/knotifydialog.cpp:784
-msgid "Are You Sure?"
-msgstr "您確定嗎？"
-
-#: tdefile/knotifydialog.cpp:785
-msgid "&Reset"
-msgstr "重設(&R)"
-
-#: tdefile/knotifydialog.cpp:858
-msgid "Select Sound File"
-msgstr "選擇聲音檔"
-
-#: tdefile/knotifydialog.cpp:894
-msgid "Select Log File"
-msgstr "選擇記錄檔"
-
-#: tdefile/knotifydialog.cpp:908
-msgid "Select File to Execute"
-msgstr "選擇要執行的檔案"
-
-#: tdefile/knotifydialog.cpp:942
-msgid "The specified file does not exist."
-msgstr "指定的檔案可能不存在。"
-
-#: tdefile/knotifydialog.cpp:1012
-msgid "No description available"
-msgstr "沒有描述"
-
-#: tdefile/tdefiledialog.cpp:347
-msgid "Please specify the filename to save to."
-msgstr "請指定要儲存的檔案名稱。"
-
-#: tdefile/tdefiledialog.cpp:349
-msgid "Please select the file to open."
-msgstr "請選擇要開啟的檔案。"
-
-#: tdefile/tdefiledialog.cpp:410 tdefile/tdefiledialog.cpp:453
-#: tdefile/tdefiledialog.cpp:1558
-msgid "You can only select local files."
-msgstr "您只能選取本地檔案。"
-
-#: tdefile/tdefiledialog.cpp:411 tdefile/tdefiledialog.cpp:454
-#: tdefile/tdefiledialog.cpp:1559
-msgid "Remote Files Not Accepted"
-msgstr "不接受遠端檔案"
-
-#: tdefile/tdefiledialog.cpp:445
-msgid ""
-"%1\n"
-"does not appear to be a valid URL.\n"
-msgstr ""
-"%1\n"
-"似乎不是有效的 URL。\n"
-
-#: tdefile/tdefiledialog.cpp:445
-msgid "Invalid URL"
-msgstr "無效的 URL"
-
-#: tdefile/tdefiledialog.cpp:782
-msgid ""
-"<p>While typing in the text area, you may be presented with possible matches. "
-"This feature can be controlled by clicking with the right mouse button and "
-"selecting a preferred mode from the <b>Text Completion</b> menu."
-msgstr "<p>在文字區輸入時，您會看到可能的相符項目。這項功能可以按滑鼠右鍵從<b>文字補齊</b>選單選擇您所偏好的模式來控制。"
-
-#: tdefile/tdefiledialog.cpp:791
-msgid "This is the name to save the file as."
-msgstr "這是儲存檔案時所用的名稱。"
-
-#: tdefile/tdefiledialog.cpp:796
-msgid ""
-"This is the list of files to open. More than one file can be specified by "
-"listing several files, separated by spaces."
-msgstr "這是要開啟的檔案清單。如果想要指定多個檔案，可以用空格分隔。"
-
-#: tdefile/tdefiledialog.cpp:803
-msgid "This is the name of the file to open."
-msgstr "這是要開啟的檔案的名稱。"
-
-#: tdefile/tdefiledialog.cpp:841
-msgid "Current location"
-msgstr "目前位置"
-
-#: tdefile/tdefiledialog.cpp:842
-msgid ""
-"This is the currently listed location. The drop-down list also lists commonly "
-"used locations. This includes standard locations, such as your home folder, as "
-"well as locations that have been visited recently."
-msgstr "這裡是目前清單的位置。常常使用的位置會列在這裡。這包含了標準位置，像是您的家目錄，還有最近參訪過的位置。"
-
-#: tdefile/tdefiledialog.cpp:849
-#, c-format
-msgid "Root Folder: %1"
-msgstr "Root 資料夾： %1"
-
-#: tdefile/tdefiledialog.cpp:855
-#, c-format
-msgid "Home Folder: %1"
-msgstr "Home 資料夾： %1"
-
-#: tdefile/tdefiledialog.cpp:864
-#, c-format
-msgid "Documents: %1"
-msgstr "文件：%1"
-
-#: tdefile/tdefiledialog.cpp:871
-#, c-format
-msgid "Desktop: %1"
-msgstr "桌面：%1"
-
-#: tdefile/tdefiledialog.cpp:912
-msgid ""
-"<qt>Click this button to enter the parent folder."
-"<p>For instance, if the current location is file:/home/%1 clicking this button "
-"will take you to file:/home.</qt>"
-msgstr ""
-"<qt>按這個按鈕來進入上一層目錄。"
-"<p>例如，如果目前位置是 file:/home/%1，按這個按鈕將把您帶到  file:/home。</qt>"
-
-#: tdefile/tdefiledialog.cpp:916
-msgid "Click this button to move backwards one step in the browsing history."
-msgstr "按這個按鈕在瀏覽歷史中向後移動一步。"
-
-#: tdefile/tdefiledialog.cpp:918
-msgid "Click this button to move forward one step in the browsing history."
-msgstr "按這個按鈕在瀏覽歷史中向前移動一步。"
-
-#: tdefile/tdefiledialog.cpp:920
-msgid "Click this button to reload the contents of the current location."
-msgstr "按這個按鈕來重新載入目前位置的內容。"
-
-#: tdefile/tdefiledialog.cpp:923
-msgid "Click this button to create a new folder."
-msgstr "按這個按鈕來建立新資料夾。"
-
-#: tdefile/tdefiledialog.cpp:926
-msgid "Show Quick Access Navigation Panel"
-msgstr "顯示快速存取導覽面板"
-
-#: tdefile/tdefiledialog.cpp:927
-msgid "Hide Quick Access Navigation Panel"
-msgstr "隱藏快速存取導覽面板"
-
-#: tdefile/tdefiledialog.cpp:932
-msgid "Show Bookmarks"
-msgstr "顯示書籤"
-
-#: tdefile/tdefiledialog.cpp:933
-msgid "Hide Bookmarks"
-msgstr "隱藏書籤"
-
-#: tdefile/tdefiledialog.cpp:938
-msgid ""
-"<qt>This is the configuration menu for the file dialog. Various options can be "
-"accessed from this menu including: "
-"<ul>"
-"<li>how files are sorted in the list</li>"
-"<li>types of view, including icon and list</li>"
-"<li>showing of hidden files</li>"
-"<li>the Quick Access navigation panel</li>"
-"<li>file previews</li>"
-"<li>separating folders from files</li></ul></qt>"
-msgstr ""
-"<qt>這是檔案對話方塊的組態設定選單。此選單中可存取的各種選項包括："
-"<ul>"
-"<li>清單中的檔案如何排序</li>"
-"<li>檢視類型，包括圖示和列表</li>"
-"<li>隱藏檔案的顯示</li>"
-"<li>快速存取導覽面板</li>"
-"<li>檔案預覽</li>"
-"<li>區分檔案和目錄</li></ul></qt>"
-
-#: tdefile/tdefiledialog.cpp:992
-msgid "&Location:"
-msgstr "位置(&L)："
-
-#: tdefile/tdefiledialog.cpp:1018
-msgid ""
-"<qt>This is the filter to apply to the file list. File names that do not match "
-"the filter will not be shown."
-"<p>You may select from one of the preset filters in the drop down menu, or you "
-"may enter a custom filter directly into the text area."
-"<p>Wildcards such as * and ? are allowed.</qt>"
-msgstr ""
-"<qt>這是應用到檔案清單的篩選器。不符合該篩選器的檔案名稱將不會被顯示。"
-"<p>您可以從下拉選單中選擇預設的篩選器，或者直接在文字區域中輸入自訂的篩選器。"
-"<p>允許使用 * 和 ? 萬用字元。</qt>"
-
-#: tdefile/tdefiledialog.cpp:1024
-msgid "&Filter:"
-msgstr "篩選器(&F)："
-
-#: tdefile/tdefiledialog.cpp:1171
-msgid "search term"
-msgstr ""
-
-#: tdefile/tdefiledialog.cpp:1488
-msgid ""
-"The chosen filenames do not\n"
-"appear to be valid."
-msgstr ""
-"所選取的檔案名稱\n"
-"大豆豆豆得豆得豆豆都似乎無效。"
-
-#: tdefile/tdefiledialog.cpp:1490
-msgid "Invalid Filenames"
-msgstr "無效的檔名"
-
-#: tdefile/tdefiledialog.cpp:1520
-msgid ""
-"The requested filenames\n"
-"%1\n"
-"do not appear to be valid;\n"
-"make sure every filename is enclosed in double quotes."
-msgstr ""
-"要求的檔案名稱\n"
-"%1\n"
-"似乎無效；\n"
-"請確定每個檔案名稱已用雙引號括起來。"
-
-#: tdefile/tdefiledialog.cpp:1524
-msgid "Filename Error"
-msgstr "檔案名稱錯誤"
-
-#: tdefile/tdefiledialog.cpp:1681
-msgid "*|All Folders"
-msgstr "*|所有資料夾"
-
-#: misc/tdewalletd/tdewalletd.cpp:443 misc/tdewalletd/tdewalletd.cpp:457
-#: tdefile/tdefiledialog.cpp:1841
-msgid "&Open"
-msgstr "開啟(&O)"
-
-#: tdefile/tdefiledialog.cpp:1981
-msgid "Automatically select filename e&xtension (%1)"
-msgstr "自動選擇檔案名稱延伸檔名(&X)[%1]"
-
-#: tdefile/tdefiledialog.cpp:1982
-msgid "the extension <b>%1</b>"
-msgstr "延伸檔名 <b>%1</b>"
-
-#: tdefile/tdefiledialog.cpp:1990
-msgid "Automatically select filename e&xtension"
-msgstr "自動選擇報導延伸檔名(&X)"
-
-#: tdefile/tdefiledialog.cpp:1991
-msgid "a suitable extension"
-msgstr "合適的延伸檔名"
-
-#: tdefile/tdefiledialog.cpp:2002
-msgid ""
-"This option enables some convenient features for saving files with extensions:"
-"<br>"
-"<ol>"
-"<li>Any extension specified in the <b>%1</b> text area will be updated if you "
-"change the file type to save in."
-"<br>"
-"<br></li>"
-"<li>If no extension is specified in the <b>%2</b> text area when you click <b>"
-"Save</b>, %3 will be added to the end of the filename (if the filename does not "
-"already exist). This extension is based on the file type that you have chosen "
-"to save in."
-"<br>"
-"<br>If you do not want TDE to supply an extension for the filename, you can "
-"either turn this option off or you can suppress it by adding a period (.) to "
-"the end of the filename (the period will be automatically removed).</li></ol>"
-"If unsure, keep this option enabled as it makes your files more manageable."
-msgstr ""
-"這個選項啟用了一些儲存檔案名稱與延伸檔名的便利功能："
-"<br>"
-"<ol>"
-"<li>如果您改變了要儲存的檔案類型，任何在 <b>%1</b> 文字區域指定的延伸檔名都會被更新。"
-"<br>"
-"<br></li>"
-"<li>當您按下<b>儲存</b>時，如果在 <b>%2</b> 文字區域中沒有指定延伸檔名，%3 "
-"會被加到檔案名稱的結尾（如果檔案名稱尚未存在）。這個延伸檔名是根據您選擇儲存的檔案類型而定。"
-"<br>"
-"<br>如果你不想要 TDE 提供任何延伸檔名，您可以將此選項關閉或者您可以在檔案名稱的結尾加上句點(.)來限制它（這個句點會自動被移除）。</li></ol>"
-"如果不確定，保持啟用此選項，因為它會讓您的檔案更容易管理。"
-
-#: tdefile/tdefiledialog.cpp:2276
-msgid ""
-"<qt>This button allows you to bookmark specific locations. Click on this button "
-"to open the bookmark menu where you may add, edit or select a bookmark."
-"<p>These bookmarks are specific to the file dialog, but otherwise operate like "
-"bookmarks elsewhere in TDE.</qt>"
-msgstr ""
-"<qt>這個按鈕可以讓您將指定位置加入書籤。按這個按鈕將打開書籤選單，其中您可以添加、編輯或選擇書籤。"
-"<p>這些書籤專用於檔案對話方塊，但是可以像 TDE 其他地方的書籤一樣操作。</qt>"
-
-#: tdefile/tdediroperator.cpp:920 tdefile/tdediroperator.cpp:1321
-#: tdefile/tdefiledetailview.cpp:64
-msgid "Detailed View"
-msgstr "詳細檢視"
-
-#: misc/uiserver.cpp:146 misc/uiserver.cpp:471
-#: tdefile/tdefiledetailview.cpp:67
-msgid "Size"
-msgstr "大小"
-
-#: tdefile/tdefiledetailview.cpp:68
-msgid "Date"
-msgstr "日期"
-
-#: tdefile/tdefiledetailview.cpp:69
-msgid "Permissions"
-msgstr "權限"
-
-#: tdefile/tdediroperator.cpp:448
-msgid "You did not select a file to delete."
-msgstr "您尚未選擇要刪除的檔案。"
-
-#: tdefile/tdediroperator.cpp:449
-msgid "Nothing to Delete"
-msgstr "沒有任何要刪除的東西"
-
-#: tdefile/tdediroperator.cpp:471
-msgid ""
-"<qt>Do you really want to delete\n"
-" <b>'%1'</b>?</qt>"
-msgstr ""
-"<qt>您真的要刪除\n"
-"<b>「%1」</b>？</qt>"
-
-#: tdefile/tdediroperator.cpp:473
-msgid "Delete File"
-msgstr "刪除檔案"
-
-#: tdefile/tdediroperator.cpp:478
-#, c-format
-msgid ""
-"_n: Do you really want to delete this item?\n"
-"Do you really want to delete these %n items?"
-msgstr "您真的要刪除這 %n 個項目嗎？"
-
-#: tdefile/tdediroperator.cpp:480
-msgid "Delete Files"
-msgstr "刪除檔案"
-
-#: tdefile/tdediroperator.cpp:511
-msgid "You did not select a file to trash."
-msgstr "您尚未選擇要丟到資源回收桶的檔案。"
-
-#: tdefile/tdediroperator.cpp:512
-msgid "Nothing to Trash"
-msgstr "沒有要丟到資源回收桶的東西"
-
-#: tdefile/tdediroperator.cpp:534
-msgid ""
-"<qt>Do you really want to trash\n"
-" <b>'%1'</b>?</qt>"
-msgstr ""
-"<qt>您真的要把\n"
-"<b>「%1」</b>丟到資源回收桶？</qt>"
-
-#: tdefile/tdediroperator.cpp:536
-msgid "Trash File"
-msgstr "資源回收桶檔案"
-
-#: tdefile/tdediroperator.cpp:537 tdefile/tdediroperator.cpp:544
-msgid ""
-"_: to trash\n"
-"&Trash"
-msgstr "資源回收桶(&T)"
-
-#: tdefile/tdediroperator.cpp:541
-#, c-format
-msgid ""
-"_n: translators: not called for n == 1\n"
-"Do you really want to trash these %n items?"
-msgstr "您真的要把這 %n 個項目丟到資源回收桶嗎？"
-
-#: tdefile/tdediroperator.cpp:543
-msgid "Trash Files"
-msgstr "資源回收桶檔案"
-
-#: tdefile/tdediroperator.cpp:658 tdefile/tdediroperator.cpp:726
-msgid "The specified folder does not exist or was not readable."
-msgstr "指定的資料夾不存在或無法讀取。"
-
-#: tdefile/tdediroperator.cpp:925 tdefile/tdediroperator.cpp:1319
-msgid "Short View"
-msgstr "簡短檢視"
-
-#: tdefile/tdediroperator.cpp:1260
-msgid "Parent Folder"
-msgstr "上層資料夾"
-
-#: tdefile/tdediroperator.cpp:1271
-msgid "Move to Trash"
-msgstr "移至資源回收桶"
-
-#: tdefile/tdediroperator.cpp:1282
-msgid "Sorting"
-msgstr "排序中"
-
-#: tdefile/tdediroperator.cpp:1283
-msgid "By Name"
-msgstr "依名稱"
-
-#: tdefile/tdediroperator.cpp:1286
-msgid "By Date"
-msgstr "依日期"
-
-#: tdefile/tdediroperator.cpp:1289
-msgid "By Size"
-msgstr "依大小"
-
-#: tdefile/tdediroperator.cpp:1292
-msgid "Reverse"
-msgstr "反轉"
-
-#: tdefile/tdediroperator.cpp:1302
-msgid "Folders First"
-msgstr "資料夾在前"
-
-#: tdefile/tdediroperator.cpp:1304
-msgid "Case Insensitive"
-msgstr "不區分大小寫"
-
-#: tdefile/tdediroperator.cpp:1324
-msgid "Show Hidden Files"
-msgstr "顯示隱藏檔案"
-
-#: tdefile/tdediroperator.cpp:1327
-msgid "Separate Folders"
-msgstr "分開資料夾"
-
-#: tdefile/tdediroperator.cpp:1331
-msgid "Show Preview"
-msgstr "顯示預覽"
-
-#: tdefile/tdediroperator.cpp:1335
-msgid "Hide Preview"
-msgstr "隱藏預覽"
-
-#: bookmarks/kbookmark.cc:117
-msgid "Create New Bookmark Folder"
-msgstr "建立新書籤資料夾"
-
-#: bookmarks/kbookmark.cc:118
-#, c-format
-msgid "Create New Bookmark Folder in %1"
-msgstr "建立新書籤資料夾於 %1"
-
-#: bookmarks/kbookmark.cc:120
-msgid "New folder:"
-msgstr "新資料夾:"
-
-#: bookmarks/kbookmark.cc:286
-msgid "--- separator ---"
-msgstr "--- 分隔符號 ---"
-
-#: bookmarks/kbookmarkmanager.cc:365
-msgid ""
-"Unable to save bookmarks in %1. Reported error was: %2. This error message will "
-"only be shown once. The cause of the error needs to be fixed as quickly as "
-"possible, which is most likely a full hard drive."
-msgstr "無法儲存書籤於 %1。回報的錯誤為： %2。這個錯誤訊息將只會顯示一次。造成錯誤的原因需要盡速修正，大多數的情況可能是硬碟已經滿了。"
-
-#: bookmarks/kbookmarkmanager.cc:506 bookmarks/kbookmarkmenu.cc:343
-msgid "Cannot add bookmark with empty URL."
-msgstr "無法新增一個空的 URL 書籤。"
-
-#: bookmarks/kbookmarkimporter_opera.cc:110
-#: bookmarks/kbookmarkimporter_opera.cc:113
-msgid "*.adr|Opera Bookmark Files (*.adr)"
-msgstr "*.adr|Opera 書籤檔案 (*.adr)"
-
-#: bookmarks/kbookmarkmenu.cc:259
-msgid "Add Bookmark Here"
-msgstr "加入書籤於此"
-
-#: bookmarks/kbookmarkmenu.cc:276
-msgid "Open Folder in Bookmark Editor"
-msgstr "在書籤編輯器中開啟資料夾"
-
-#: bookmarks/kbookmarkmenu.cc:279
-msgid "Delete Folder"
-msgstr "刪除資料夾"
-
-#: bookmarks/kbookmarkmenu.cc:287
-msgid "Copy Link Address"
-msgstr "複製連結位址"
-
-#: bookmarks/kbookmarkmenu.cc:290
-msgid "Delete Bookmark"
-msgstr "刪除書籤"
-
-#: bookmarks/kbookmarkmenu.cc:318
-msgid "Bookmark Properties"
-msgstr "書籤屬性"
-
-#: bookmarks/kbookmarkmenu.cc:381
-msgid ""
-"Are you sure you wish to remove the bookmark folder\n"
-"\"%1\"?"
-msgstr ""
-"您確定希望移除書籤資料夾\n"
-"「%1」？"
-
-#: bookmarks/kbookmarkmenu.cc:382
-msgid ""
-"Are you sure you wish to remove the bookmark\n"
-"\"%1\"?"
-msgstr ""
-"您確定希望移除書籤\n"
-"「%1」？"
-
-#: bookmarks/kbookmarkmenu.cc:383
-msgid "Bookmark Folder Deletion"
-msgstr "書籤資料夾刪除"
-
-#: bookmarks/kbookmarkmenu.cc:384
-msgid "Bookmark Deletion"
-msgstr "書籤刪除"
-
-#: bookmarks/kbookmarkmenu.cc:486
-msgid "Bookmark Tabs as Folder..."
-msgstr "書籤分頁成為資料夾..."
-
-#: bookmarks/kbookmarkmenu.cc:495
-msgid "Add a folder of bookmarks for all open tabs."
-msgstr "把所有開啟的分頁加入成為書籤的資料夾。"
-
-#: bookmarks/kbookmarkmenu.cc:506 bookmarks/kbookmarkmenu_p.h:146
-msgid "Add Bookmark"
-msgstr "加入書籤"
-
-#: bookmarks/kbookmarkmenu.cc:515
-msgid "Add a bookmark for the current document"
-msgstr "將目前文件加入書籤內"
-
-#: bookmarks/kbookmarkmenu.cc:529
-msgid "Edit your bookmark collection in a separate window"
-msgstr "在另外的視窗編輯書籤內容"
-
-#: bookmarks/kbookmarkmenu.cc:538
-msgid "&New Bookmark Folder..."
-msgstr "新書籤資料夾(&N)..."
-
-#: bookmarks/kbookmarkmenu.cc:550
-msgid "Create a new bookmark folder in this menu"
-msgstr "在該選單內建立新書籤資料夾"
-
-#: bookmarks/kbookmarkmenu.cc:684
-msgid "Quick Actions"
-msgstr "快速動作"
-
-#: bookmarks/kbookmarkmenu.cc:831
-msgid "&New Folder..."
-msgstr "新增資料夾(&N)..."
-
-#: bookmarks/kbookmarkmenu.cc:948
-msgid "Bookmark"
-msgstr "書籤"
-
-#: bookmarks/kbookmarkmenu.cc:1115
-msgid "Netscape Bookmarks"
-msgstr "Netscape 書籤"
-
-#: bookmarks/kbookmarkimporter_ns.cc:110 bookmarks/kbookmarkimporter_ns.cc:113
-msgid "*.html|HTML Files (*.html)"
-msgstr "*.html|HTML 檔案 (*.html)"
-
-#: bookmarks/kbookmarkimporter_ns.cc:197
-msgid "<!-- This file was generated by Konqueror -->"
-msgstr "<!-- 這個檔案由 Konqueror 程式所產生 -->"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr ""
-"Eric Cheng,Chih-Wei Huang,Kenduest Lee,Jouston Huang (Huang, Jiun-Jeng),Wang "
-"Jian,Anthony Fok ,Yuan-Chen Cheng"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr ""
-"<ericc@shinewave.com.tw>,<cwhuang@linux.org.tw>,<kenduest@i18n.linux.org.tw>"
-",<jouston@housediy.com>,<lark@linux.net.cn>,<anthony@thizlinux.com>"
-",<ycheng@slat.org>"
-
-#: misc/tdewalletd/tdewalletd.cpp:438
-msgid ""
-"<qt>TDE has requested to open the wallet '<b>%1</b>'. Please enter the password "
-"for this wallet below."
-msgstr "<qt>TDE 被要求開啟錢包「<b>%1</b>」。請在下面輸入這個錢包的密碼。"
-
-#: misc/tdewalletd/tdewalletd.cpp:440
-msgid ""
-"<qt>The application '<b>%1</b>' has requested to open the wallet '<b>%2</b>"
-"'. Please enter the password for this wallet below."
-msgstr "<qt>應用程式「<b>%1</b>」要求開啟錢包「<b>%2</b>」。請在下面輸入這個錢包的密碼。"
-
-#: misc/tdewalletd/tdewalletd.cpp:452
-msgid ""
-"TDE has requested to open the wallet. This is used to store sensitive data in a "
-"secure fashion. Please enter a password to use with this wallet or click cancel "
-"to deny the application's request."
-msgstr "TDE 被要求開啟錢包。這是一種很安全的儲存敏感資料的方式。請輸入密碼來使用這個錢包或者按取消來拒絕應用程式的要求。"
-
-#: misc/tdewalletd/tdewalletd.cpp:454
-msgid ""
-"<qt>The application '<b>%1</b>' has requested to open the TDE wallet. This is "
-"used to store sensitive data in a secure fashion. Please enter a password to "
-"use with this wallet or click cancel to deny the application's request."
-msgstr ""
-"<qt>應用程式「<b>%1</b>」要求開啟 TDE 錢包。這是一種很安全的儲存敏感資料的方式。請輸入密碼來使用這個錢包或者按取消來拒絕應用程式的要求。"
-
-#: misc/tdewalletd/tdewalletd.cpp:461
-msgid ""
-"<qt>TDE has requested to create a new wallet named '<b>%1</b>"
-"'. Please choose a password for this wallet, or cancel to deny the "
-"application's request."
-msgstr "<qt>TDE 被要求建立一個新的名為「<b>%1</b>」的錢包。請選擇給這個錢包使用的密碼，或者按取消來拒絕應用程式的要求。"
-
-#: misc/tdewalletd/tdewalletd.cpp:463
-msgid ""
-"<qt>The application '<b>%1</b>' has requested to create a new wallet named '<b>"
-"%2</b>'. Please choose a password for this wallet, or cancel to deny the "
-"application's request."
-msgstr ""
-"<qt>應用程式「<b>%1</b>」要求建立一個新的名為「<b>%2</b>」的錢包。請選擇給這個錢包使用的密碼，或者按取消來拒絕應用程式的要求。"
-
-#: misc/tdewalletd/tdewalletd.cpp:466
-msgid "C&reate"
-msgstr "建立(&R)"
-
-#: misc/tdewalletd/tdewalletd.cpp:470 misc/tdewalletd/tdewalletd.cpp:645
-#: misc/tdewalletd/tdewalletd.cpp:661 misc/tdewalletd/tdewalletd.cpp:672
-#: misc/tdewalletd/tdewalletd.cpp:677 misc/tdewalletd/tdewalletd.cpp:1237
-msgid "TDE Wallet Service"
-msgstr "TDE 錢包服務"
-
-#: misc/tdewalletd/tdewalletd.cpp:482
-msgid ""
-"<qt>Error opening the wallet '<b>%1</b>'. Please try again."
-"<br>(Error code %2: %3)"
-msgstr "<qt>在開啟錢包「<b>%1</b>」時發生錯誤。請再試一次。<br>(錯誤代碼 %2: %3)"
-
-#: misc/tdewalletd/tdewalletd.cpp:556
-msgid "<qt>TDE has requested access to the open wallet '<b>%1</b>'."
-msgstr "<qt>TDE 被要求存取開啟的錢包「<b>%1</b>」。"
-
-#: misc/tdewalletd/tdewalletd.cpp:558
-msgid ""
-"<qt>The application '<b>%1</b>' has requested access to the open wallet '<b>"
-"%2</b>'."
-msgstr "<qt>應用程式「<b>%1</b>」要求存取開啟的錢包「<b>%2</b>」。"
-
-#: misc/tdewalletd/tdewalletd.cpp:645
-msgid ""
-"Unable to open wallet. The wallet must be opened in order to change the "
-"password."
-msgstr "無法開啟錢包。必須開啟這個錢包才能夠改變密碼。"
-
-#: misc/tdewalletd/tdewalletd.cpp:660
-msgid "<qt>Please choose a new password for the wallet '<b>%1</b>'."
-msgstr "<qt>請選擇一個新的密碼給錢包「<b>%1</b>」。"
-
-#: misc/tdewalletd/tdewalletd.cpp:672
-msgid "Error re-encrypting the wallet. Password was not changed."
-msgstr "重新加密錢包時發生錯誤。密碼尚未變更。"
-
-#: misc/tdewalletd/tdewalletd.cpp:677
-msgid "Error reopening the wallet. Data may be lost."
-msgstr "重開錢包發生錯誤。資料可能流失。"
-
-#: misc/tdewalletd/tdewalletd.cpp:1237
-msgid ""
-"There have been repeated failed attempts to gain access to a wallet. An "
-"application may be misbehaving."
-msgstr "嘗試取得錢包的存取權發生重複的錯誤。此應用程式可能有問題。"
-
-#: misc/tdewalletd/tdewalletwizard.ui.h:23
-msgid "<qt>Password is empty.  <b>(WARNING: Insecure)"
-msgstr "<qt>密碼是空的。  <b>(警告：不安全)"
-
-#: misc/tdewalletd/tdewalletwizard.ui.h:25
-msgid "Passwords match."
-msgstr "密碼相符。"
-
-#: misc/tdewalletd/tdewalletwizard.ui.h:28
-msgid "Passwords do not match."
-msgstr "密碼不符。"
-
-#: misc/tdemailservice.cpp:32
-msgid "KMailService"
-msgstr "KMail服務"
-
-#: misc/tdemailservice.cpp:32
-msgid "Mail service"
-msgstr "郵件服務"
-
-#: misc/tdefile/fileprops.cpp:200
-msgid "Do not print the mimetype of the given file(s)"
-msgstr "不要顯示指定檔案的 MIME 類型"
-
-#: misc/tdefile/fileprops.cpp:204
-msgid ""
-"List all supported metadata keys of the given file(s). If mimetype is not "
-"specified, the mimetype of the given files is used."
-msgstr "列出指定檔案所有支援的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 mime 類型。"
-
-#: misc/tdefile/fileprops.cpp:210
-msgid ""
-"List all preferred metadata keys of the given file(s). If mimetype is not "
-"specified, the mimetype of the given files is used."
-msgstr "列出指定檔案所有偏好的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 mime 類型。"
-
-#: misc/tdefile/fileprops.cpp:216
-msgid "List all metadata keys which have a value in the given file(s)."
-msgstr "列出指定檔案所有具有數值的中繼資料鍵值。"
-
-#: misc/tdefile/fileprops.cpp:221
-msgid "Prints all mimetypes for which metadata support is available."
-msgstr "列出所有可支援中繼資料的 mime 類型。"
-
-#: misc/tdefile/fileprops.cpp:226
-msgid ""
-"Do not print a warning when more than one file was given and they do not all "
-"have the same mimetype."
-msgstr "當指定超過一個以上的檔案而他們並沒有相同的 mime 類型時不要顯示警示。"
-
-#: misc/tdefile/fileprops.cpp:231
-msgid "Prints all metadata values, available in the given file(s)."
-msgstr "列出指定檔案中可用的所有中繼資料數值。"
-
-#: misc/tdefile/fileprops.cpp:236
-msgid "Prints the preferred metadata values, available in the given file(s)."
-msgstr "列出指定檔案中可用的偏好中繼資料數值。"
-
-#: misc/tdefile/fileprops.cpp:240
-msgid ""
-"Opens a TDE properties dialog to allow viewing and modifying of metadata of the "
-"given file(s)"
-msgstr "開啟 TDE 屬性對話盒以便檢視並修改指定檔案的中繼資料"
-
-#: misc/tdefile/fileprops.cpp:244
-msgid ""
-"Prints the value for 'key' of the given file(s). 'key' may also be a "
-"comma-separated list of keys"
-msgstr "列出指定檔案的「鍵」值。「鍵」值也可能是以逗號分隔的鍵值清單"
-
-#: misc/tdefile/fileprops.cpp:248
-msgid ""
-"Attempts to set the value 'value' for the metadata key 'key' for the given "
-"file(s)"
-msgstr "嘗試設定指定檔案的中繼鍵值「key」的數值「value」"
-
-#: misc/tdefile/fileprops.cpp:251
-msgid "The group to get values from or set values to"
-msgstr "要取得或設定數值的群組"
-
-#: misc/tdefile/fileprops.cpp:255
-msgid "The file (or a number of files) to operate on."
-msgstr "要操作的檔案（或是檔案的數字）。"
-
-#: misc/tdefile/fileprops.cpp:270
-msgid "No support for metadata extraction found."
-msgstr "找不到提取中繼資料的支援。"
-
-#: misc/tdefile/fileprops.cpp:275
-msgid "Supported MimeTypes:"
-msgstr "支援的 MIME 類型:"
-
-#: misc/tdefile/fileprops.cpp:410
-msgid "tdefile"
-msgstr "tdefile"
-
-#: misc/tdefile/fileprops.cpp:411
-msgid "A commandline tool to read and modify metadata of files."
-msgstr "用來讀取和修改檔案中繼資料的命令列工具。"
-
-#: misc/tdefile/fileprops.cpp:438
-msgid "No files specified"
-msgstr "沒有指定檔案"
-
-#: misc/tdefile/fileprops.cpp:467
-msgid "Cannot determine metadata"
-msgstr "無法辨識中繼資料"
-
-#: misc/tdesendbugmail/main.cpp:22
-msgid "Subject line"
-msgstr "主題行"
-
-#: misc/tdesendbugmail/main.cpp:23
-msgid "Recipient"
-msgstr "收件者"
-
-#: misc/tdesendbugmail/main.cpp:33
-msgid "Error connecting to server."
-msgstr "連線到伺服器發生錯誤。"
-
-#: misc/tdesendbugmail/main.cpp:36
-msgid "Not connected."
-msgstr "尚未連接。"
-
-#: misc/tdesendbugmail/main.cpp:39
-msgid "Connection timed out."
-msgstr "連線逾時。"
-
-#: misc/tdesendbugmail/main.cpp:42
-msgid "Time out waiting for server interaction."
-msgstr "等候伺服器回應逾時。"
-
-#: misc/tdesendbugmail/main.cpp:46
-msgid "Server said: \"%1\""
-msgstr "伺服器回應: \"%1\""
-
-#: misc/tdesendbugmail/main.cpp:62
-msgid "KSendBugMail"
-msgstr "KSendBugMail"
-
-#: misc/tdesendbugmail/main.cpp:63
-msgid "Sends a short bug report to submit@bugs.trinitydesktop.org"
-msgstr "寄一封簡短的錯誤報告到 submit@bugs.trinitydesktop.org"
-
-#: misc/tdesendbugmail/main.cpp:65
-msgid "Author"
-msgstr "作者"
-
-#: misc/uiserver.cpp:98 misc/uiserver.cpp:603 misc/uiserver.cpp:682
-msgid "Settings..."
-msgstr "設定..."
-
-#: misc/uiserver.cpp:126
-msgid "Configure Network Operation Window"
-msgstr "設定網路操作視窗"
-
-#: misc/uiserver.cpp:130
-msgid "Show system tray icon"
-msgstr "系統匣圖示"
-
-#: misc/uiserver.cpp:131
-msgid "Keep network operation window always open"
-msgstr "保持網路操作視窗永遠開啟"
-
-#: misc/uiserver.cpp:132
-msgid "Show column headers"
-msgstr "顯示欄位標題"
-
-#: misc/uiserver.cpp:133
-msgid "Show toolbar"
-msgstr "顯示工具列"
-
-#: misc/uiserver.cpp:134
-msgid "Show statusbar"
-msgstr "顯示狀態列"
-
-#: misc/uiserver.cpp:135
-msgid "Column widths are user adjustable"
-msgstr "欄位寬度是使用者可以調整的"
-
-#: misc/uiserver.cpp:136
-msgid "Show information:"
-msgstr "顯示資訊:"
-
-#: misc/uiserver.cpp:143 misc/uiserver.cpp:474
-msgid "URL"
-msgstr "URL"
-
-#: misc/uiserver.cpp:144 misc/uiserver.cpp:473
-msgid ""
-"_: Remaining Time\n"
-"Rem. Time"
-msgstr "剩餘時間"
-
-#: misc/uiserver.cpp:145 misc/uiserver.cpp:472
-msgid "Speed"
-msgstr "速度"
-
-#: misc/uiserver.cpp:147 misc/uiserver.cpp:470
-#, c-format
-msgid "%"
-msgstr "%"
-
-#: misc/uiserver.cpp:148 misc/uiserver.cpp:469
-msgid "Count"
-msgstr "記數"
-
-#: misc/uiserver.cpp:149 misc/uiserver.cpp:468
-msgid ""
-"_: Resume\n"
-"Res."
-msgstr "恢復"
-
-#: misc/uiserver.cpp:150 misc/uiserver.cpp:467
-msgid "Local Filename"
-msgstr "本地檔名"
-
-#: misc/uiserver.cpp:151 misc/uiserver.cpp:466
-msgid "Operation"
-msgstr "作業"
-
-#: misc/uiserver.cpp:254
-msgid "%1 / %2"
-msgstr "%1 / %2"
-
-#: misc/uiserver.cpp:291
-msgid "%1/s"
-msgstr "%1/秒"
-
-#: misc/uiserver.cpp:302
-msgid "Copying"
-msgstr "複製中"
-
-#: misc/uiserver.cpp:311
-msgid "Moving"
-msgstr "移動中"
-
-#: misc/uiserver.cpp:320
-msgid "Creating"
-msgstr "建立中"
-
-#: misc/uiserver.cpp:329
-msgid "Deleting"
-msgstr "刪除中"
-
-#: misc/uiserver.cpp:337
-msgid "Loading"
-msgstr "載入中"
-
-#: misc/uiserver.cpp:362
-msgid "Examining"
-msgstr "檢查中"
-
-#: misc/uiserver.cpp:370
-msgid "Mounting"
-msgstr "裝載中"
-
-#: misc/uiserver.cpp:608 misc/uiserver.cpp:1097
-msgid " Files: %1 "
-msgstr " 檔案: %1 "
-
-#: misc/uiserver.cpp:609
-msgid ""
-"_: Remaining Size\n"
-" Rem. Size: %1 kB "
-msgstr " 剩餘大小: %1 kB "
-
-#: misc/uiserver.cpp:610
-msgid ""
-"_: Remaining Time\n"
-" Rem. Time: 00:00:00 "
-msgstr " 剩餘時間: 00:00:00 "
-
-#: misc/uiserver.cpp:611
-msgid " %1 kB/s "
-msgstr " %1 kB/秒 "
-
-#: misc/uiserver.cpp:679
-msgid "Cancel Job"
-msgstr "取消工作"
-
-#: misc/uiserver.cpp:1098
-msgid ""
-"_: Remaining Size\n"
-" Rem. Size: %1 "
-msgstr " 剩餘大小: %1"
-
-#: misc/uiserver.cpp:1100
-msgid ""
-"_: Remaining Time\n"
-" Rem. Time: %1 "
-msgstr " 剩餘時間: %1"
-
-#: misc/uiserver.cpp:1384
-msgid "TDE Progress Information UI Server"
-msgstr "TDE 進度資訊使用者介面伺服器"
-
-#: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388
-msgid "Developer"
-msgstr "開發人員"
-
-#: misc/tdetelnetservice.cpp:41
-msgid "telnet service"
-msgstr "遠端登入服務"
-
-#: misc/tdetelnetservice.cpp:42
-msgid "telnet protocol handler"
-msgstr "遠端登入協定處理器"
-
-#: misc/tdetelnetservice.cpp:76
-msgid "You do not have permission to access the %1 protocol."
-msgstr "您可能沒有權限存取 %1 通訊協定。"
-
-#: misc/kpac/proxyscout.cpp:124
-#, c-format
-msgid ""
-"The proxy configuration script is invalid:\n"
-"%1"
-msgstr ""
-"代理伺服器組態命令稿無效：\n"
-"%1"
-
-#: misc/kpac/proxyscout.cpp:184
-#, c-format
-msgid ""
-"The proxy configuration script returned an error:\n"
-"%1"
-msgstr ""
-"代理伺服器組態命令稿傳回一個錯誤：\n"
-"%1"
-
-#: misc/kpac/downloader.cpp:81
-#, c-format
-msgid ""
-"Could not download the proxy configuration script:\n"
-"%1"
-msgstr ""
-"無法下載代理伺服器組態命令稿：\n"
-"%1"
-
-#: misc/kpac/downloader.cpp:83
-msgid "Could not download the proxy configuration script"
-msgstr "無法下載代理伺服器組態命令稿"
-
-#: misc/kpac/discovery.cpp:116
-msgid "Could not find a usable proxy configuration script"
-msgstr "無法找到可用的代理伺服器組態命令稿"
-
-#: ../tdeioslave/http/http.cc:5189 kpasswdserver/kpasswdserver.cpp:346
-msgid "  Do you want to retry?"
-msgstr "  您要重試嗎？"
-
-#: ../tdeioslave/http/http.cc:5190 kpasswdserver/kpasswdserver.cpp:348
-msgid "Authentication"
-msgstr "認證"
-
-#: kpasswdserver/kpasswdserver.cpp:348
-msgid "Retry"
-msgstr "重試"
-
 #: tests/kurifiltertest.cpp:144
 msgid "kurifiltertest"
 msgstr "kurifiltertest"
@@ -5481,27 +5192,44 @@ msgstr "URI 過濾外掛程式架構的單位測試。"
 msgid "Use space as keyword delimeter for web shortcuts"
 msgstr "使用空白作為網頁捷徑的關鍵字分隔"
 
-#: ../tdeioslave/iso/tdeiso_info.cpp:37
-msgid "TDE utility for getting ISO information"
+#: ../tdeioslave/file/file.cc:565 ../tdeioslave/file/file.cc:799
+#, c-format
+msgid ""
+"Could not change permissions for\n"
+"%1"
 msgstr ""
+"無法變更該權限\n"
+"%1"
 
-#: ../tdeioslave/iso/tdeiso_info.cpp:43
-msgid "Returns 0 if the file exists, -1 if it does not"
-msgstr ""
+#: ../tdeioslave/file/file.cc:731
+msgid "Cannot copy file from %1 to %2. (Errno: %3)"
+msgstr "無法複製檔案從 %1 到 %2（錯誤代碼：%3）"
 
-#: ../tdeioslave/iso/tdeiso_info.cpp:44
-msgid ""
-"The device on which to execute the specified command.  Example: /dev/sr0"
-msgstr ""
+#: ../tdeioslave/file/file.cc:1210
+#, c-format
+msgid "No media in device for %1"
+msgstr "沒有 %1 的媒體於裝置中"
 
-#: ../tdeioslave/iso/tdeiso_info.cpp:50
-msgid "Kerberos Realm Manager"
-msgstr ""
+#: ../tdeioslave/file/file.cc:1385
+msgid "No Media inserted or Media not recognized."
+msgstr "沒有插入媒體，或無法辨認媒體。"
 
-#: ../tdeioslave/iso/tdeiso_info.cpp:93
-#, fuzzy
-msgid "No device was specified"
-msgstr "沒有指定檔案"
+#: ../tdeioslave/file/file.cc:1395 ../tdeioslave/file/file.cc:1604
+msgid "\"vold\" is not running."
+msgstr "\"vold\"未執行。"
+
+#: ../tdeioslave/file/file.cc:1429
+msgid "Could not find program \"mount\""
+msgstr "找不到 mount 程式"
+
+#: ../tdeioslave/file/file.cc:1617
+msgid "Could not find program \"umount\""
+msgstr "找不到 umount 程式"
+
+#: ../tdeioslave/file/file.cc:1801
+#, c-format
+msgid "Could not read %1"
+msgstr "無法讀取 %1"
 
 #: ../tdeioslave/ftp/ftp.cc:451
 #, c-format
@@ -5543,11 +5271,11 @@ msgstr ""
 "%2\n"
 "\n"
 
-#: ../tdeioslave/ftp/ftp.cc:596 ../tdeioslave/http/http.cc:5201
+#: ../tdeioslave/ftp/ftp.cc:596 ../tdeioslave/http/http.cc:5203
 msgid "You need to supply a username and a password to access this site."
 msgstr "您必須提供一組使用者名稱和密碼來存取這個網站。"
 
-#: ../tdeioslave/ftp/ftp.cc:598 ../tdeioslave/http/http.cc:5209
+#: ../tdeioslave/ftp/ftp.cc:598 ../tdeioslave/http/http.cc:5211
 msgid "Site:"
 msgstr "網站:"
 
@@ -5568,221 +5296,208 @@ msgstr "無法登入 %1。"
 msgid "No host specified."
 msgstr "沒有指定主機。"
 
-#: ../tdeioslave/http/http.cc:1580
+#: ../tdeioslave/http/http.cc:1582
 msgid "Otherwise, the request would have succeeded."
 msgstr "否則，該請求就已經成功了。"
 
-#: ../tdeioslave/http/http.cc:1584
+#: ../tdeioslave/http/http.cc:1586
 msgid "retrieve property values"
 msgstr "接收屬性數值"
 
-#: ../tdeioslave/http/http.cc:1587
+#: ../tdeioslave/http/http.cc:1589
 msgid "set property values"
 msgstr "設定屬性數值"
 
-#: ../tdeioslave/http/http.cc:1590
+#: ../tdeioslave/http/http.cc:1592
 msgid "create the requested folder"
 msgstr "建立所請求的資料夾"
 
-#: ../tdeioslave/http/http.cc:1593
+#: ../tdeioslave/http/http.cc:1595
 msgid "copy the specified file or folder"
 msgstr "複製指定的檔案或資料夾"
 
-#: ../tdeioslave/http/http.cc:1596
+#: ../tdeioslave/http/http.cc:1598
 msgid "move the specified file or folder"
 msgstr "搬移指定的檔案或資料夾"
 
-#: ../tdeioslave/http/http.cc:1599
+#: ../tdeioslave/http/http.cc:1601
 msgid "search in the specified folder"
 msgstr "在指定的資料夾搜尋"
 
-#: ../tdeioslave/http/http.cc:1602
+#: ../tdeioslave/http/http.cc:1604
 msgid "lock the specified file or folder"
 msgstr "鎖住指定的檔案或資料夾"
 
-#: ../tdeioslave/http/http.cc:1605
+#: ../tdeioslave/http/http.cc:1607
 msgid "unlock the specified file or folder"
 msgstr "解除鎖定指定的檔案或資料夾"
 
-#: ../tdeioslave/http/http.cc:1608
+#: ../tdeioslave/http/http.cc:1610
 msgid "delete the specified file or folder"
 msgstr "刪除指定的檔案或資料夾"
 
-#: ../tdeioslave/http/http.cc:1611
+#: ../tdeioslave/http/http.cc:1613
 msgid "query the server's capabilities"
 msgstr "查詢伺服器的性能"
 
-#: ../tdeioslave/http/http.cc:1614
+#: ../tdeioslave/http/http.cc:1616
 msgid "retrieve the contents of the specified file or folder"
 msgstr "接收所指定的檔案或資料夾的內容"
 
-#: ../tdeioslave/http/http.cc:1626 ../tdeioslave/http/http.cc:1779
+#: ../tdeioslave/http/http.cc:1628 ../tdeioslave/http/http.cc:1781
 msgid "An unexpected error (%1) occurred while attempting to %2."
 msgstr "在連線到 %2 發生了無預期的錯誤 (%1)。"
 
-#: ../tdeioslave/http/http.cc:1634
+#: ../tdeioslave/http/http.cc:1636
 msgid "The server does not support the WebDAV protocol."
 msgstr "對方伺服器並不支援 WebDAV 通訊協定。"
 
-#: ../tdeioslave/http/http.cc:1675
+#: ../tdeioslave/http/http.cc:1677
 msgid ""
 "An error occurred while attempting to %1, %2. A summary of the reasons is "
-"below."
-"<ul>"
+"below.<ul>"
 msgstr "在連線到 %1，%2 時發生錯誤。錯誤原因如下。<ul>"
 
-#: ../tdeioslave/http/http.cc:1687 ../tdeioslave/http/http.cc:1790
+#: ../tdeioslave/http/http.cc:1689 ../tdeioslave/http/http.cc:1792
 #, c-format
 msgid "Access was denied while attempting to %1."
 msgstr "連線到 %1 被拒絕，存取失敗。"
 
-#: ../tdeioslave/http/http.cc:1694
+#: ../tdeioslave/http/http.cc:1696
 msgid "The specified folder already exists."
 msgstr "所指定的資料夾已經存在。"
 
-#: ../tdeioslave/http/http.cc:1700 ../tdeioslave/http/http.cc:1795
+#: ../tdeioslave/http/http.cc:1702 ../tdeioslave/http/http.cc:1797
 msgid ""
-"A resource cannot be created at the destination until one or more intermediate "
-"collections (folders) have been created."
+"A resource cannot be created at the destination until one or more "
+"intermediate collections (folders) have been created."
 msgstr "資源無法在目標被建立，直到一個或多個中間集合(資料夾)已經被建立之後。"
 
-#: ../tdeioslave/http/http.cc:1709
+#: ../tdeioslave/http/http.cc:1711
 #, c-format
 msgid ""
-"The server was unable to maintain the liveness of the properties listed in the "
-"propertybehavior XML element or you attempted to overwrite a file while "
+"The server was unable to maintain the liveness of the properties listed in "
+"the propertybehavior XML element or you attempted to overwrite a file while "
 "requesting that files are not overwritten. %1"
-msgstr "伺服器無法維護列表在在屬性行為的 XML 元素中的屬性的生存或是您試圖在不被覆寫的檔案裡覆寫一個檔案。 %1"
+msgstr ""
+"伺服器無法維護列表在在屬性行為的 XML 元素中的屬性的生存或是您試圖在不被覆寫的"
+"檔案裡覆寫一個檔案。 %1"
 
-#: ../tdeioslave/http/http.cc:1719
+#: ../tdeioslave/http/http.cc:1721
 #, c-format
 msgid "The requested lock could not be granted. %1"
 msgstr "發出的鎖定請求無法被許可。%1"
 
-#: ../tdeioslave/http/http.cc:1725
+#: ../tdeioslave/http/http.cc:1727
 msgid "The server does not support the request type of the body."
 msgstr "伺服器並不支援請求內容的類型。"
 
-#: ../tdeioslave/http/http.cc:1730 ../tdeioslave/http/http.cc:1802
+#: ../tdeioslave/http/http.cc:1732 ../tdeioslave/http/http.cc:1804
 msgid "Unable to %1 because the resource is locked."
 msgstr "無法連線到 %1，因為資源被鎖定，所以無法進行。"
 
-#: ../tdeioslave/http/http.cc:1734
+#: ../tdeioslave/http/http.cc:1736
 msgid "This action was prevented by another error."
 msgstr "該動作被另外一個錯誤所阻止。"
 
-#: ../tdeioslave/http/http.cc:1741 ../tdeioslave/http/http.cc:1807
+#: ../tdeioslave/http/http.cc:1743 ../tdeioslave/http/http.cc:1809
 msgid ""
 "Unable to %1 because the destination server refuses to accept the file or "
 "folder."
 msgstr "無法連線到 %1，因為對方伺服器拒絕接收該檔案或資料夾。"
 
-#: ../tdeioslave/http/http.cc:1748 ../tdeioslave/http/http.cc:1813
+#: ../tdeioslave/http/http.cc:1750 ../tdeioslave/http/http.cc:1815
 msgid ""
-"The destination resource does not have sufficient space to record the state of "
-"the resource after the execution of this method."
+"The destination resource does not have sufficient space to record the state "
+"of the resource after the execution of this method."
 msgstr "目標資源需的空間並不足以紀錄在執行這個方式之後的資源狀態"
 
-#: ../tdeioslave/http/http.cc:1770
+#: ../tdeioslave/http/http.cc:1772
 #, c-format
 msgid "upload %1"
 msgstr "上傳 %1"
 
-#: ../tdeioslave/http/http.cc:2091
+#: ../tdeioslave/http/http.cc:2093
 msgid "Connecting to %1..."
 msgstr "連線到 %1..."
 
-#: ../tdeioslave/http/http.cc:2109 ../tdeioslave/http/http.cc:2113
+#: ../tdeioslave/http/http.cc:2111 ../tdeioslave/http/http.cc:2115
 msgid "Proxy %1 at port %2"
 msgstr "代理伺服器 %1 埠號 %2"
 
-#: ../tdeioslave/http/http.cc:2139
+#: ../tdeioslave/http/http.cc:2141
 msgid "Connection was to %1 at port %2"
 msgstr "到主機 %1 埠號 %2 的連線"
 
-#: ../tdeioslave/http/http.cc:2145
+#: ../tdeioslave/http/http.cc:2147
 msgid "%1 (port %2)"
 msgstr "%1 (埠號 %2)"
 
-#: ../tdeioslave/http/http.cc:2674
+#: ../tdeioslave/http/http.cc:2676
 msgid "%1 contacted. Waiting for reply..."
 msgstr "%1 已聯繫上。等待回應中..."
 
-#: ../tdeioslave/http/http.cc:3042
+#: ../tdeioslave/http/http.cc:3044
 msgid "Server processing request, please wait..."
 msgstr "伺服器產生請求中，請稍後..."
 
-#: ../tdeioslave/http/http.cc:3918
+#: ../tdeioslave/http/http.cc:3920
 msgid "Requesting data to send"
 msgstr "要送出的請求資料"
 
-#: ../tdeioslave/http/http.cc:3959
+#: ../tdeioslave/http/http.cc:3961
 #, c-format
 msgid "Sending data to %1"
 msgstr "送出資料至 %1"
 
-#: ../tdeioslave/http/http.cc:4378
+#: ../tdeioslave/http/http.cc:4380
 msgid "Retrieving %1 from %2..."
 msgstr "從 %2 接收 %1 資料..."
 
-#: ../tdeioslave/http/http.cc:4387
+#: ../tdeioslave/http/http.cc:4389
 msgid "Retrieving from %1..."
 msgstr "正在從 %1 接收資料..."
 
-#: ../tdeioslave/http/http.cc:5181 ../tdeioslave/http/http.cc:5329
+#: ../tdeioslave/http/http.cc:5183 ../tdeioslave/http/http.cc:5331
 msgid "Authentication Failed."
 msgstr "認證失敗。"
 
-#: ../tdeioslave/http/http.cc:5184 ../tdeioslave/http/http.cc:5332
+#: ../tdeioslave/http/http.cc:5186 ../tdeioslave/http/http.cc:5334
 msgid "Proxy Authentication Failed."
 msgstr "代理伺服器認證失敗。"
 
-#: ../tdeioslave/http/http.cc:5210 ../tdeioslave/http/http.cc:5227
+#: ../tdeioslave/http/http.cc:5212 ../tdeioslave/http/http.cc:5229
 msgid "<b>%1</b> at <b>%2</b>"
 msgstr "<b>%1</b> 在 <b>%2</b>"
 
-#: ../tdeioslave/http/http.cc:5217
+#: ../tdeioslave/http/http.cc:5219
 msgid ""
-"You need to supply a username and a password for the proxy server listed below "
-"before you are allowed to access any sites."
-msgstr "您必須為下列的代理伺服器提供一組使用者名稱和密碼，才能夠取得存取網站的權限。"
+"You need to supply a username and a password for the proxy server listed "
+"below before you are allowed to access any sites."
+msgstr ""
+"您必須為下列的代理伺服器提供一組使用者名稱和密碼，才能夠取得存取網站的權限。"
 
-#: ../tdeioslave/http/http.cc:5226
+#: ../tdeioslave/http/http.cc:5228
 msgid "Proxy:"
 msgstr "代理伺服器:"
 
-#: ../tdeioslave/http/http.cc:5248
+#: ../tdeioslave/http/http.cc:5250
 msgid "Authentication needed for %1 but authentication is disabled."
 msgstr "%1 需要驗證但是驗證已停用。"
 
-#: ../tdeioslave/http/http.cc:5870
+#: ../tdeioslave/http/http.cc:5872
 msgid ""
 "Unsupported method: authentication will fail. Please submit a bug report."
 msgstr "不支援的方法：驗證將會失敗。請傳送一個錯誤回報。"
 
-#: ../tdeioslave/http/kcookiejar/main.cpp:30
-msgid "HTTP Cookie Daemon"
-msgstr "HTTP Cookie 常駐程式"
-
-#: ../tdeioslave/http/kcookiejar/main.cpp:36
-msgid "Shut down cookie jar"
-msgstr "關閉 cookie jar"
-
-#: ../tdeioslave/http/kcookiejar/main.cpp:37
-msgid "Remove cookies for domain"
-msgstr "移除該網域的所有 cookies"
-
-#: ../tdeioslave/http/kcookiejar/main.cpp:38
-msgid "Remove all cookies"
-msgstr "移除所有的 cookies"
-
-#: ../tdeioslave/http/kcookiejar/main.cpp:39
-msgid "Reload configuration file"
-msgstr "重新載入組態檔案"
+#: ../tdeioslave/http/http_cache_cleaner.cpp:53
+#: ../tdeioslave/http/http_cache_cleaner.cpp:194
+msgid "TDE HTTP cache maintenance tool"
+msgstr "TDE HTTP 快取維修工具"
 
-#: ../tdeioslave/http/kcookiejar/main.cpp:46
-msgid "HTTP cookie daemon"
-msgstr "HTTP Cookie 常駐程式"
+#: ../tdeioslave/http/http_cache_cleaner.cpp:59
+msgid "Empty the cache"
+msgstr "清空快取"
 
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:80
 msgid "Cookie Alert"
@@ -5817,8 +5532,8 @@ msgstr "只接受這些 cookies(&O)"
 
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:149
 msgid ""
-"Select this option to accept/reject only this cookie. You will be prompted if "
-"another cookie is received. <em>(see WebBrowsing/Cookies in the Control "
+"Select this option to accept/reject only this cookie. You will be prompted "
+"if another cookie is received. <em>(see WebBrowsing/Cookies in the Control "
 "Center)</em>."
 msgstr ""
 "選擇這個選項來接受或拒絕這個 cookie。在收到另外一個 cookie，您會被再次提示。 "
@@ -5830,13 +5545,14 @@ msgstr "所有從這個網域傳來的 cookie(&M)"
 
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:156
 msgid ""
-"Select this option to accept/reject all cookies from this site. Choosing this "
-"option will add a new policy for the site this cookie originated from. This "
-"policy will be permanent until you manually change it from the Control Center "
-"<em>(see WebBrowsing/Cookies in the Control Center)</em>."
+"Select this option to accept/reject all cookies from this site. Choosing "
+"this option will add a new policy for the site this cookie originated from. "
+"This policy will be permanent until you manually change it from the Control "
+"Center <em>(see WebBrowsing/Cookies in the Control Center)</em>."
 msgstr ""
-"選擇這個選項來接受或拒絕所有從這個站來的 cookies。選擇這個選項將會新增原則到這個 cookie "
-"的來源站台。這個原則將會固定直到您自己手動從控制中心改變它。<em>(參照「控制中心」裡的「網頁瀏覽/Cookies」)</em>。"
+"選擇這個選項來接受或拒絕所有從這個站來的 cookies。選擇這個選項將會新增原則到"
+"這個 cookie 的來源站台。這個原則將會固定直到您自己手動從控制中心改變它。"
+"<em>(參照「控制中心」裡的「網頁瀏覽/Cookies」)</em>。"
 
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:163
 msgid "All &cookies"
@@ -5845,11 +5561,12 @@ msgstr "所有的 cookie(&C)"
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:165
 msgid ""
 "Select this option to accept/reject all cookies from anywhere. Choosing this "
-"option will change the global cookie policy set in the Control Center for all "
-"cookies <em>(see WebBrowsing/Cookies in the Control Center)</em>."
+"option will change the global cookie policy set in the Control Center for "
+"all cookies <em>(see WebBrowsing/Cookies in the Control Center)</em>."
 msgstr ""
-"選擇這個選項來接受/拒絕所有的 cookies 不論從那來。 選擇這個選項將會改變在控制中心給所有 cookies 的通用 cookie 原則。<em>"
-"(參照「控制中心」裡的「網頁瀏覽/Cookies」)</em>。"
+"選擇這個選項來接受/拒絕所有的 cookies 不論從那來。 選擇這個選項將會改變在控制"
+"中心給所有 cookies 的通用 cookie 原則。<em>(參照「控制中心」裡的「網頁瀏覽/"
+"Cookies」)</em>。"
 
 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:182
 msgid "&Accept"
@@ -5931,106 +5648,595 @@ msgstr "伺服器"
 msgid "Servers, page scripts"
 msgstr "伺服器，頁面命令稿"
 
-#: ../tdeioslave/http/http_cache_cleaner.cpp:53
-#: ../tdeioslave/http/http_cache_cleaner.cpp:194
-msgid "TDE HTTP cache maintenance tool"
-msgstr "TDE HTTP 快取維修工具"
+#: ../tdeioslave/http/kcookiejar/main.cpp:30
+msgid "HTTP Cookie Daemon"
+msgstr "HTTP Cookie 常駐程式"
 
-#: ../tdeioslave/http/http_cache_cleaner.cpp:59
-msgid "Empty the cache"
-msgstr "清空快取"
+#: ../tdeioslave/http/kcookiejar/main.cpp:36
+msgid "Shut down cookie jar"
+msgstr "關閉 cookie jar"
+
+#: ../tdeioslave/http/kcookiejar/main.cpp:37
+msgid "Remove cookies for domain"
+msgstr "移除該網域的所有 cookies"
+
+#: ../tdeioslave/http/kcookiejar/main.cpp:38
+msgid "Remove all cookies"
+msgstr "移除所有的 cookies"
+
+#: ../tdeioslave/http/kcookiejar/main.cpp:39
+msgid "Reload configuration file"
+msgstr "重新載入組態檔案"
+
+#: ../tdeioslave/http/kcookiejar/main.cpp:46
+msgid "HTTP cookie daemon"
+msgstr "HTTP Cookie 常駐程式"
+
+#: ../tdeioslave/iso/tdeiso_info.cpp:37
+msgid "TDE utility for getting ISO information"
+msgstr ""
+
+#: ../tdeioslave/iso/tdeiso_info.cpp:43
+msgid "Returns 0 if the file exists, -1 if it does not"
+msgstr ""
+
+#: ../tdeioslave/iso/tdeiso_info.cpp:44
+msgid ""
+"The device on which to execute the specified command.  Example: /dev/sr0"
+msgstr ""
+
+#: ../tdeioslave/iso/tdeiso_info.cpp:50
+msgid "Kerberos Realm Manager"
+msgstr ""
+
+#: ../tdeioslave/iso/tdeiso_info.cpp:93
+#, fuzzy
+msgid "No device was specified"
+msgstr "沒有指定檔案"
 
 #: ../tdeioslave/metainfo/metainfo.cpp:99
 #, c-format
 msgid "No metainfo for %1"
 msgstr "沒有 %1 的 meta 資訊"
 
-#: ../tdeioslave/file/file.cc:565 ../tdeioslave/file/file.cc:799
-#, c-format
+#: kssl/keygenwizard.ui:25
+#, no-c-format
 msgid ""
-"Could not change permissions for\n"
-"%1"
+"You have indicated that you wish to obtain or purchase a secure certificate. "
+"This wizard is intended to guide you through the procedure. You may cancel "
+"at any time, and this will abort the transaction."
 msgstr ""
-"無法變更該權限\n"
-"%1"
+"您已指明您想要取得或者購買安全性憑證。此精靈將會引導您完成這個過程。您可在任"
+"何時候取消，從而中止此項事務。"
 
-#: ../tdeioslave/file/file.cc:731
-msgid "Cannot copy file from %1 to %2. (Errno: %3)"
-msgstr "無法複製檔案從 %1 到 %2（錯誤代碼：%3）"
+#: kssl/keygenwizard2.ui:25
+#, no-c-format
+msgid ""
+"You must now provide a password for the certificate request. Please choose a "
+"very secure password as this will be used to encrypt your private key."
+msgstr ""
+"您現在必須就為憑證請求提供一個密碼。請選擇非常安全的密碼，因為該密碼會用來加"
+"密您的私人密鑰。"
 
-#: ../tdeioslave/file/file.cc:1210
-#, c-format
-msgid "No media in device for %1"
-msgstr "沒有 %1 的媒體於裝置中"
+#: kssl/keygenwizard2.ui:38
+#, no-c-format
+msgid "&Repeat password:"
+msgstr "再次輸入密碼(&R)："
 
-#: ../tdeioslave/file/file.cc:1385
-msgid "No Media inserted or Media not recognized."
-msgstr "沒有插入媒體，或無法辨認媒體。"
+#: kssl/keygenwizard2.ui:49
+#, no-c-format
+msgid "&Choose password:"
+msgstr "選擇密碼(&C)："
 
-#: ../tdeioslave/file/file.cc:1395 ../tdeioslave/file/file.cc:1604
-msgid "\"vold\" is not running."
-msgstr "\"vold\"未執行。"
+#: misc/tdewalletd/kbetterthankdialogbase.ui:60
+#, no-c-format
+msgid "Allow &Once"
+msgstr "允許一次(&O)"
 
-#: ../tdeioslave/file/file.cc:1429
-msgid "Could not find program \"mount\""
-msgstr "找不到 mount 程式"
+#: misc/tdewalletd/kbetterthankdialogbase.ui:71
+#, no-c-format
+msgid "Allow &Always"
+msgstr "允許永遠使用(&A)"
 
-#: ../tdeioslave/file/file.cc:1617
-msgid "Could not find program \"umount\""
-msgstr "找不到 umount 程式"
+#: misc/tdewalletd/kbetterthankdialogbase.ui:79
+#, no-c-format
+msgid "&Deny"
+msgstr "拒絕(&D)"
 
-#: ../tdeioslave/file/file.cc:1801
-#, c-format
-msgid "Could not read %1"
-msgstr "無法讀取 %1"
+#: misc/tdewalletd/kbetterthankdialogbase.ui:87
+#, no-c-format
+msgid "Deny &Forever"
+msgstr "永遠拒絕(&F)"
 
-#~ msgid "Shared"
-#~ msgstr "共用"
+#: misc/tdewalletd/tdewalletwizard.ui:16
+#, no-c-format
+msgid "TDE Wallet Wizard"
+msgstr "TDE 錢包服務"
 
-#~ msgid "Terminal"
-#~ msgstr "終端"
+#: misc/tdewalletd/tdewalletwizard.ui:23
+#, no-c-format
+msgid "Introduction"
+msgstr "介紹"
 
-#~ msgid "Check this option if the application you want to run is a text mode application or if you want the information that is provided by the terminal emulator window."
-#~ msgstr "如果你想要執行的應用程式是文字模式應用程式或者您所要的資訊是由終端機模擬視窗提供的，請核取這個選項。"
+#: misc/tdewalletd/tdewalletwizard.ui:56
+#, no-c-format
+msgid "<u>TDEWallet</u> - The TDE Wallet System"
+msgstr "<u>TDEWallet</u> -  TDE 錢包系統"
 
-#~ msgid "Check this option if the text mode application offers relevant information on exit. Keeping the terminal emulator open allows you to retrieve this information."
-#~ msgstr "如果文字模式應用程式在結束時提供相關資訊，請核取這個選項。保持終端機模擬視窗開啟以便您取得這個資訊。"
+#: misc/tdewalletd/tdewalletwizard.ui:81
+#, no-c-format
+msgid ""
+"Welcome to TDEWallet, the TDE Wallet System.  TDEWallet allows you to store "
+"your passwords and other personal information on disk in an encrypted file, "
+"preventing others from viewing the information.  This wizard will tell you "
+"about TDEWallet and help you configure it for the first time."
+msgstr ""
+"歡迎使用 TDEWallet，TDE 的錢包系統。TDEWallet 讓您可以將您的密碼和其他個人資"
+"訊以加密檔案的形式儲存在磁碟上，防止別人檢視這些資訊。這個精靈會告訴您關於 "
+"TDEWallet 並且協助您做初次的設定。"
 
-#~ msgid "Check this option if you want to run this application with a different user id. Every process has a different user id associated with it. This id code determines file access and other permissions. The password of the user is required to use this option."
-#~ msgstr "如果你想要以不同的使用者 id 來執行這個應用程式，請核取這個選項。每個程序都跟不同的使用者 id 相關聯。這個 id 代碼決定了檔案存取與其他的權限。使用這個選項需要該使用者的密碼。"
+#: misc/tdewalletd/tdewalletwizard.ui:112
+#, no-c-format
+msgid "&Basic setup (recommended)"
+msgstr "基本設定[建議的](&B)"
 
-#~ msgid "Enter the user name you want to run the application as."
-#~ msgstr "輸入你想要在這個應用程式使用的使用者名稱。"
+#: misc/tdewalletd/tdewalletwizard.ui:123
+#, no-c-format
+msgid "&Advanced setup"
+msgstr "進階設定(&A)"
 
-#~ msgid "Enter the user name you want to run the application as here."
-#~ msgstr "在這裡輸入你想要在這個應用程式使用的使用者名稱。"
+#: misc/tdewalletd/tdewalletwizard.ui:180
+#, no-c-format
+msgid ""
+"The TDE Wallet system stores your data in a <i>wallet</i> file on your local "
+"hard disk.  The data is only written in encrypted form, presently using the "
+"blowfish algorithm with your password as the key.  When a wallet is opened, "
+"the wallet manager application will launch and display an icon in the system "
+"tray.  You can use this application to manage your wallets.  It even permits "
+"you to drag wallets and wallet contents, allowing you to easily copy a "
+"wallet to a remote system."
+msgstr ""
+"TDE 錢包系統將您的資料儲存在本地磁碟上的 <i>wallet</i> 檔案。該資料只會以加密"
+"的形式寫入，目前是使用 blowfish 演算法（以您的密碼作為鑰匙）。當錢包開啟時，"
+"會執行錢包管理程式並在系統匣中顯示圖示。您可以使用這個應用程式來管理您的錢"
+"包。它甚至允許您拖放錢包和錢包的內容，讓您可以輕鬆的複製錢包到遠端系統。"
 
-#~ msgid "Startup"
-#~ msgstr "啟動"
+#: misc/tdewalletd/tdewalletwizard.ui:193
+#, no-c-format
+msgid "Password Selection"
+msgstr "密碼選擇"
 
-#~ msgid "Enable &launch feedback"
-#~ msgstr "啟用執行回饋(&L)"
+#: misc/tdewalletd/tdewalletwizard.ui:204
+#, no-c-format
+msgid ""
+"Various applications may attempt to use the TDE wallet to store passwords or "
+"other information such as web form data and cookies.  If you would like "
+"these applications to use the wallet, you must enable it now and choose a "
+"password.  The password you choose <i>cannot</i> be recovered if it is lost, "
+"and will allow anyone who knows it to obtain all the information contained "
+"in the wallet."
+msgstr ""
+"許多應用程式可能嘗試使用 TDE 錢包來儲存密碼或者其他資訊，像是網頁表單資料和 "
+"cookies。如果您想要讓這些應用程式使用錢包，你必須現在啟用它並且選擇一個密碼。"
+"如果您所選擇的密碼遺失了是<i>不能</i>復原的，並且將會讓任何知道它的人得以獲得"
+"錢包中所包含的所有資訊。"
 
-#~ msgid "Check this option if you want to make clear that your application has started. This visual feedback may appear as a busy cursor or in the taskbar."
-#~ msgstr "如果你想要清楚您的應用程式是否已啟動，請核取這個選項。這個虛擬回饋可能顯示為忙碌的游標或者顯示在工作列中。"
+#: misc/tdewalletd/tdewalletwizard.ui:234
+#, no-c-format
+msgid "Enter a new password:"
+msgstr "請輸入新的密碼："
 
-#~ msgid "&Place in system tray"
-#~ msgstr "置於系統匣(&P)"
+#: misc/tdewalletd/tdewalletwizard.ui:251
+#, no-c-format
+msgid "Verify password:"
+msgstr "驗證密碼："
 
-#~ msgid "Check this option if you want to have a system tray handle for your application."
-#~ msgstr "如果您想要系統匣處理您的應用程式，請核取這個選項。"
+#: misc/tdewalletd/tdewalletwizard.ui:301
+#, no-c-format
+msgid "Yes, I wish to use the TDE wallet to store my personal information."
+msgstr "是的，我希望使用 TDE 錢包來儲存我的個人資訊。"
 
-#~ msgid "&DCOP registration:"
-#~ msgstr "&DCOP 註冊:"
+#: misc/tdewalletd/tdewalletwizard.ui:390
+#, no-c-format
+msgid "Security Level"
+msgstr "安全等級"
 
-#~ msgid "None"
-#~ msgstr "無"
+#: misc/tdewalletd/tdewalletwizard.ui:401
+#, no-c-format
+msgid ""
+"The TDE Wallet system allows you to control the level of security of your "
+"personal data.  Some of these settings do impact usability.  While the "
+"default settings are generally acceptable for most users, you may wish to "
+"change some of them.  You may further tune these settings from the TDEWallet "
+"control module."
+msgstr ""
+"TDE 錢包系統讓您可以控制您個人資料的安全等級。這些設定時有些非常有用。預設的"
+"設定值是適合大多數的使用者，但是您可能希望改變其中某些部分。您往後仍然可以從 "
+"TDEWallet 控制模組中來改變這些設定值。"
 
-#~ msgid "Multiple Instances"
-#~ msgstr "多重實體"
+#: misc/tdewalletd/tdewalletwizard.ui:432
+#, no-c-format
+msgid "Store network passwords and local passwords in separate wallet files"
+msgstr "將網路密碼與本地端密碼儲存在不同的 wallet 檔案"
 
-#~ msgid "Single Instance"
-#~ msgstr "單一實體"
+#: misc/tdewalletd/tdewalletwizard.ui:440
+#, no-c-format
+msgid "Automatically close idle wallets"
+msgstr "自動關閉閒置的錢包"
 
-#~ msgid "Run Until Finished"
-#~ msgstr "執行單元結束"
+#: tdefile/knotifywidgetbase.ui:91
+#, no-c-format
+msgid "Events"
+msgstr "事件"
+
+#: tdefile/knotifywidgetbase.ui:117
+#, no-c-format
+msgid "Quick Controls"
+msgstr "快速控制"
+
+#: tdefile/knotifywidgetbase.ui:128
+#, no-c-format
+msgid "Apply to &all applications"
+msgstr "套用到所有應用程式(&A)"
+
+#: tdefile/knotifywidgetbase.ui:170
+#, no-c-format
+msgid "Turn O&ff All"
+msgstr "全部關閉(&F)"
+
+#: tdefile/knotifywidgetbase.ui:173 tdefile/knotifywidgetbase.ui:184
+#, no-c-format
+msgid "Allows you to change the behavior for all events at once"
+msgstr "允許您一次變更所有事件的行為"
+
+#: tdefile/knotifywidgetbase.ui:181
+#, no-c-format
+msgid "Turn O&n All"
+msgstr "全部開啟(&N)"
+
+#: tdefile/knotifywidgetbase.ui:215
+#, no-c-format
+msgid "Print a message to standard &error output"
+msgstr "列印訊息到標準錯誤輸出(&E)"
+
+#: tdefile/knotifywidgetbase.ui:223
+#, no-c-format
+msgid "Show a &message in a pop-up window"
+msgstr "在快顯視窗中顯示訊息(&M)"
+
+#: tdefile/knotifywidgetbase.ui:231
+#, no-c-format
+msgid "E&xecute a program:"
+msgstr "執行程式(&X):"
+
+#: tdefile/knotifywidgetbase.ui:247
+#, no-c-format
+msgid "Play a &sound:"
+msgstr "播放音效(&S)："
+
+#: tdefile/knotifywidgetbase.ui:258
+#, no-c-format
+msgid "Test the Sound"
+msgstr "測試音效"
+
+#: tdefile/knotifywidgetbase.ui:268
+#, no-c-format
+msgid "Mark &taskbar entry"
+msgstr "標記工作列項目(&T)"
+
+#: tdefile/knotifywidgetbase.ui:276
+#, no-c-format
+msgid "&Log to a file:"
+msgstr "記錄到檔案(&L):"
+
+#: tdefile/knotifywidgetbase.ui:352
+#, no-c-format
+msgid "&Use a passive window that does not interrupt other work"
+msgstr "使用一個不中斷其他作業的被動式視窗(&U)"
+
+#: tdefile/knotifywidgetbase.ui:378
+#, no-c-format
+msgid "Less Options"
+msgstr "較少選項"
+
+#: tdefile/knotifywidgetbase.ui:406
+#, no-c-format
+msgid "Player Settings"
+msgstr "播放器設定"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:27
+#, no-c-format
+msgid "Terminal"
+msgstr "終端"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:58
+#, no-c-format
+msgid ""
+"Check this option if the application you want to run is a text mode "
+"application or if you want the information that is provided by the terminal "
+"emulator window."
+msgstr ""
+"如果你想要執行的應用程式是文字模式應用程式或者您所要的資訊是由終端機模擬視窗"
+"提供的，請核取這個選項。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:80
+#, no-c-format
+msgid ""
+"Check this option if the text mode application offers relevant information "
+"on exit. Keeping the terminal emulator open allows you to retrieve this "
+"information."
+msgstr ""
+"如果文字模式應用程式在結束時提供相關資訊，請核取這個選項。保持終端機模擬視窗"
+"開啟以便您取得這個資訊。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:109
+#, no-c-format
+msgid ""
+"Check this option if you want to run this application with a different user "
+"id. Every process has a different user id associated with it. This id code "
+"determines file access and other permissions. The password of the user is "
+"required to use this option."
+msgstr ""
+"如果你想要以不同的使用者 id 來執行這個應用程式，請核取這個選項。每個程序都跟"
+"不同的使用者 id 相關聯。這個 id 代碼決定了檔案存取與其他的權限。使用這個選項"
+"需要該使用者的密碼。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:140
+#, no-c-format
+msgid "Enter the user name you want to run the application as."
+msgstr "輸入你想要在這個應用程式使用的使用者名稱。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:148
+#, no-c-format
+msgid "Enter the user name you want to run the application as here."
+msgstr "在這裡輸入你想要在這個應用程式使用的使用者名稱。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:158
+#, no-c-format
+msgid "Startup"
+msgstr "啟動"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:169
+#, no-c-format
+msgid "Enable &launch feedback"
+msgstr "啟用執行回饋(&L)"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:172
+#, no-c-format
+msgid ""
+"Check this option if you want to make clear that your application has "
+"started. This visual feedback may appear as a busy cursor or in the taskbar."
+msgstr ""
+"如果你想要清楚您的應用程式是否已啟動，請核取這個選項。這個虛擬回饋可能顯示為"
+"忙碌的游標或者顯示在工作列中。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:180
+#, no-c-format
+msgid "&Place in system tray"
+msgstr "置於系統匣(&P)"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:183
+#, no-c-format
+msgid ""
+"Check this option if you want to have a system tray handle for your "
+"application."
+msgstr "如果您想要系統匣處理您的應用程式，請核取這個選項。"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:191
+#, no-c-format
+msgid "&DCOP registration:"
+msgstr "&DCOP 註冊:"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:200
+#, no-c-format
+msgid "None"
+msgstr "無"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:205
+#, no-c-format
+msgid "Multiple Instances"
+msgstr "多重實體"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:210
+#, no-c-format
+msgid "Single Instance"
+msgstr "單一實體"
+
+#: tdefile/kpropertiesdesktopadvbase.ui:215
+#, no-c-format
+msgid "Run Until Finished"
+msgstr "執行單元結束"
+
+#: tdefile/kpropertiesdesktopbase.ui:44
+#, no-c-format
+msgid "&Supported file types:"
+msgstr "支援的檔案類型(&S):"
+
+#: tdefile/kpropertiesdesktopbase.ui:52 tdefile/kpropertiesdesktopbase.ui:95
+#, no-c-format
+msgid ""
+"<qt><p>This list should show the types of file that your application can "
+"handle. This list is organized by <u>mimetypes</u>.</p>\n"
+"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
+"identifying the type of data based on filename extensions and correspondent "
+"<u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in "
+"flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</"
+"u>. To know which application should open each type of file, the system "
+"should be informed about the abilities of each application to handle these "
+"extensions and mimetypes.</p>\n"
+"<p>If you want to associate this application with one or more mimetypes that "
+"are not in this list, click on the button <b>Add</b> below. If there are one "
+"or more filetypes that this application cannot handle, you may want to "
+"remove them from the list clicking on the button <b>Remove</b> below.</p></"
+"qt>"
+msgstr ""
+"<qt><p>這個清單應該顯示您的應用程式可以處理的檔案類型。這個列表是依照 "
+"<u>mime 類型</u> 排列的。</p>\n"
+"<p>MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 "
+"<u>mime 類型</u> 的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他"
+"是一種特定種類的圖片， <u>image/x-bmp</u>。要了解哪一個應用程式用來開啟哪種類"
+"型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。"
+"</p>\n"
+"<p>如果你想要把這個應用程式關聯到一或多個列表中沒有的 mime 類型，請按下面的按"
+"鈕 <b>加入</b>。如果有一或多個此應用程式無法處理的檔案類型，您可能會想要按下"
+"面的 <b>移除</b> 按鈕來把它們從列表中移除。</p></qt>"
+
+#: tdefile/kpropertiesdesktopbase.ui:58 tdefile/kpropertiesmimetypebase.ui:36
+#, no-c-format
+msgid "Mimetype"
+msgstr "Mime 類型"
+
+#: tdefile/kpropertiesdesktopbase.ui:69 tdefile/kpropertiesmimetypebase.ui:47
+#, no-c-format
+msgid "Description"
+msgstr "描述"
+
+#: tdefile/kpropertiesdesktopbase.ui:103
+#, no-c-format
+msgid "&Name:"
+msgstr "名稱(&N):"
+
+#: tdefile/kpropertiesdesktopbase.ui:109 tdefile/kpropertiesdesktopbase.ui:117
+#, no-c-format
+msgid ""
+"Type the name you want to give to this application here. This application "
+"will appear under this name in the applications menu and in the panel."
+msgstr ""
+"在這裡輸入您想要給這個應用程式的名稱。這個應用程式在應用程式選單以及面板中會"
+"以此名稱出現。"
+
+#: tdefile/kpropertiesdesktopbase.ui:131 tdefile/kpropertiesdesktopbase.ui:139
+#, no-c-format
+msgid ""
+"Type the description of this application, based on its use, here. Examples: "
+"a dial up application (KPPP) would be \"Dial up tool\"."
+msgstr ""
+"在這裡輸入這個應用程式的描述，可根據它的用途。例如：一個撥號應用程式 (KPPP) "
+"應該是「撥號工具」。"
+
+#: tdefile/kpropertiesdesktopbase.ui:147
+#, no-c-format
+msgid "Comm&ent:"
+msgstr "備註(&E):"
+
+#: tdefile/kpropertiesdesktopbase.ui:153 tdefile/kpropertiesdesktopbase.ui:161
+#, no-c-format
+msgid "Type any comment you think is useful here."
+msgstr "在這裡輸入任何您認為有幫助的註解。"
+
+#: tdefile/kpropertiesdesktopbase.ui:169
+#, no-c-format
+msgid "Co&mmand:"
+msgstr "命令(&M):"
+
+#: tdefile/kpropertiesdesktopbase.ui:186 tdefile/kpropertiesdesktopbase.ui:205
+#, fuzzy, no-c-format
+msgid ""
+"Type the command to start this application here.\n"
+"\n"
+"Following the command, you can have several place holders which will be "
+"replaced with the actual values when the actual program is run:\n"
+"%f - a single file name\n"
+"%F - a list of files use for applications that can open several local files "
+"at once\n"
+"%u - a single URL\n"
+"%U - a list of URLs\n"
+"%d - the directory of the file to open\n"
+"%D - a list of directories\n"
+"%i - the icon\n"
+"%m - the mini-icon\n"
+"%c - the caption"
+msgstr ""
+"在這裡輸入啟動這個應用程式的指令。\n"
+"\n"
+"下列指令，你需要在實際程式執行時換上真實的數值：\n"
+"%f - 單一的檔案名稱\n"
+"%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
+"%u - 單一的網址\n"
+"%U - 網址的清單\n"
+"%d - 要開啟的檔案的目錄\n"
+"%D - 目錄的清單\n"
+"%i - 圖示\n"
+"%m - 小型圖示\n"
+"%c - 說明"
+
+#: tdefile/kpropertiesdesktopbase.ui:216
+#, no-c-format
+msgid ""
+"Click here to browse your file system in order to find the desired "
+"executable."
+msgstr "按這裡瀏覽您的檔案系統以找出想要的可執行檔。"
+
+#: tdefile/kpropertiesdesktopbase.ui:224
+#, no-c-format
+msgid "&Work path:"
+msgstr "工作路徑(&W):"
+
+#: tdefile/kpropertiesdesktopbase.ui:230 tdefile/kpropertiesdesktopbase.ui:238
+#, no-c-format
+msgid "Sets the working directory for your application."
+msgstr "設定您的應用程式的工作目錄。"
+
+#: tdefile/kpropertiesdesktopbase.ui:246
+#, no-c-format
+msgid "Add..."
+msgstr "加入..."
+
+#: tdefile/kpropertiesdesktopbase.ui:249
+#, no-c-format
+msgid ""
+"Click on this button if you want to add a type of file (mimetype) that your "
+"application can handle."
+msgstr ""
+"如果你想要加入您的應用程式可以處理的檔案類型（mime 類型），請按這個按鈕。"
+
+#: tdefile/kpropertiesdesktopbase.ui:277
+#, no-c-format
+msgid ""
+"If you want to remove a type of file (mimetype) that your application cannot "
+"handle, select the mimetype in the list above and click on this button."
+msgstr ""
+"如果你想要移除您的應用程式不能處理的檔案類型（mime 類型），請在上面列表中選"
+"擇 mime 類型並且按這個按鈕。"
+
+#: tdefile/kpropertiesdesktopbase.ui:302
+#, no-c-format
+msgid "Ad&vanced Options"
+msgstr "進階的選項(&V)"
+
+#: tdefile/kpropertiesdesktopbase.ui:305
+#, no-c-format
+msgid ""
+"Click here to modify the way this application will run, launch feedback, "
+"DCOP options or to run it as a different user."
+msgstr ""
+"按這裡修改執行這個應用程式的方式，啟動回饋、 DCOP 選項或者以不同的使用者執行"
+"它。"
+
+#: tdefile/kpropertiesmimetypebase.ui:27
+#, no-c-format
+msgid "Select one or more file types to add:"
+msgstr "選擇一個或多個要加入的檔案類型："
+
+#: tdefile/kpropertiesmimetypebase.ui:61
+#, no-c-format
+msgid ""
+"<qt><p>Select one or more types of file that your application can handle "
+"here. This list is organized by <u>mimetypes</u>.</p>\n"
+"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
+"identifying the type of data based on filename extensions and correspondent "
+"<u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in "
+"flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</"
+"u>. To know which application should open each type of file, the system "
+"should be informed about the abilities of each application to handle these "
+"extensions and mimetypes.</p>"
+msgstr ""
+"<qt><p>從這裡選擇一或多個您的應用程式可以處理的檔案類型。這個列表是依照 "
+"<u>mime 類型</u> 排列的。</p>\n"
+"<p>MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 "
+"<u>mime 類型</u> 的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他"
+"是一種特定種類的圖片， <u>image/x-bmp</u>。要了解哪一個應用程式用來開啟哪種類"
+"型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。"
+
+#~ msgid "Shared"
+#~ msgstr "共用"