Merge translation files from master branch.

7 files changed, 300 insertions, 239 deletions

diff --git a/tde-i18n-zh_TW/messages/tdebase/klipper.po b/tde-i18n-zh_TW/messages/tdebase/klipper.po
index 39a8d8d2254..a6b0e406a64 100644
--- a/tde-i18n-zh_TW/messages/tdebase/klipper.po
+++ b/tde-i18n-zh_TW/messages/tdebase/klipper.po
@@ -163,8 +163,11 @@ msgid "Action &list (right click to add/remove commands):"
 msgstr "動作清單 （敲擊右鍵來新增/移除命令）"
 
 #: configdialog.cpp:232
-msgid "Regular Expression (see https://trinitydesktop.org/docs/qt3/qregexp.html#details)"
-msgstr "正規表示法 (詳見 https://trinitydesktop.org/docs/qt3/qregexp.html#details)"
+msgid ""
+"Regular Expression (see https://trinitydesktop.org/docs/qt3/qregexp."
+"html#details)"
+msgstr ""
+"正規表示法 (詳見 https://trinitydesktop.org/docs/qt3/qregexp.html#details)"
 
 #: configdialog.cpp:233
 msgid "Description"
diff --git a/tde-i18n-zh_TW/messages/tdelibs/tdeio.po b/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
index 318aba84276..8b26a8d689d 100644
--- a/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
+++ b/tde-i18n-zh_TW/messages/tdelibs/tdeio.po
@@ -12,7 +12,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdeio\n"
-"POT-Creation-Date: 2019-07-08 00:06+0200\n"
+"POT-Creation-Date: 2019-07-21 21:14+0200\n"
 "PO-Revision-Date: 2006-09-05 10:10+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -3597,26 +3597,27 @@ msgid ""
 msgstr "此電腦支援的 %1 通訊協定的版本可能和伺服器的版本不相容。"
 
 #: tdeio/global.cpp:691
+#, fuzzy
 msgid ""
-"You may perform a search on the Internet for a TDE program (called a "
-"tdeioslave or ioslave) which supports this protocol. Places to search "
-"include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a "
-"href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
+"You may perform a search on the Trinity website for a TDE program (called a "
+"tdeioslave, ioslave or tdeio) which supports this protocol. Places to search "
+"include <a href=\"https://mirror.git.trinitydesktop.org/cgit/\">https://"
+"mirror.git.trinitydesktop.org/cgit/</a> or the repos for your distribution."
 msgstr ""
 "您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 "
 "ioslave)。建議從 <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
 "和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a> 這兩個地方搜"
 "尋。"
 
-#: tdeio/global.cpp:700
+#: tdeio/global.cpp:699
 msgid "URL Does Not Refer to a Resource."
 msgstr "URL 不是一個資源。"
 
-#: tdeio/global.cpp:701
+#: tdeio/global.cpp:700
 msgid "Protocol is a Filter Protocol"
 msgstr "該協定是一個過濾協定"
 
-#: tdeio/global.cpp:702
+#: tdeio/global.cpp:701
 msgid ""
 "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) that you entered did not refer to a specific resource."
@@ -3624,7 +3625,7 @@ msgstr ""
 "您輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator, 統一資源定位符) 並不指向特定的資源。"
 
-#: tdeio/global.cpp:705
+#: tdeio/global.cpp:704
 msgid ""
 "TDE is able to communicate through a protocol within a protocol; the "
 "protocol specified is only for use in such situations, however this is not "
@@ -3634,18 +3635,18 @@ msgstr ""
 "TDE 能夠在一個協定裡透過另一個協定進行通訊；指定的協定只適用於那種場合，現在"
 "卻不是那種場合。這個錯誤比較罕見，大概是編程出錯了。"
 
-#: tdeio/global.cpp:713
+#: tdeio/global.cpp:712
 #, c-format
 msgid "Unsupported Action: %1"
 msgstr "不支援的動作: %1"
 
-#: tdeio/global.cpp:714
+#: tdeio/global.cpp:713
 msgid ""
 "The requested action is not supported by the TDE program which is "
 "implementing the <strong>%1</strong> protocol."
 msgstr "實作 <strong>%1</strong> 協定的 TDE 程式不支援要求的動作。"
 
-#: tdeio/global.cpp:717
+#: tdeio/global.cpp:716
 msgid ""
 "This error is very much dependent on the TDE program. The additional "
 "information should give you more information than is available to the TDE "
@@ -3654,92 +3655,92 @@ msgstr ""
 "這個錯誤非常關乎於個別的 TDE 程式。[額外資訊] 應該可以比 TDE 的輸入/輸出架構"
 "給您更多的資訊。"
 
-#: tdeio/global.cpp:720
+#: tdeio/global.cpp:719
 msgid "Attempt to find another way to accomplish the same outcome."
 msgstr "請嘗試以其他的方法來達成相同的結果。"
 
-#: tdeio/global.cpp:725
+#: tdeio/global.cpp:724
 msgid "File Expected"
 msgstr "需要檔案。"
 
-#: tdeio/global.cpp:726
+#: tdeio/global.cpp:725
 msgid ""
 "The request expected a file, however the folder <strong>%1</strong> was "
 "found instead."
 msgstr "該要求需要一個檔案，然而找到的 <strong>%1</strong> 是一個資料夾。"
 
-#: tdeio/global.cpp:728
+#: tdeio/global.cpp:727
 msgid "This may be an error on the server side."
 msgstr "這個可能是伺服器端的錯誤。"
 
-#: tdeio/global.cpp:733
+#: tdeio/global.cpp:732
 msgid "Folder Expected"
 msgstr "需要資料夾"
 
-#: tdeio/global.cpp:734
+#: tdeio/global.cpp:733
 msgid ""
 "The request expected a folder, however the file <strong>%1</strong> was "
 "found instead."
 msgstr "該要求需要一個資料夾，然而找到的 <strong>%1</strong> 是一個檔案。"
 
-#: tdeio/global.cpp:741
+#: tdeio/global.cpp:740
 msgid "File or Folder Does Not Exist"
 msgstr "檔案或資料夾不存在"
 
-#: tdeio/global.cpp:742
+#: tdeio/global.cpp:741
 msgid "The specified file or folder <strong>%1</strong> does not exist."
 msgstr "指定的檔案或資料夾 <strong>%1</strong> 不存在。"
 
-#: tdeio/global.cpp:749 tdeio/job.cpp:1796 tdeio/job.cpp:3263
+#: tdeio/global.cpp:748 tdeio/job.cpp:1796 tdeio/job.cpp:3263
 #: tdeio/job.cpp:3780 tdeio/paste.cpp:65
 msgid "File Already Exists"
 msgstr "檔案已存在"
 
-#: tdeio/global.cpp:750
+#: tdeio/global.cpp:749
 msgid ""
 "The requested file could not be created because a file with the same name "
 "already exists."
 msgstr "無法建立要求的檔案，因為已經有另一個同名的檔案存在了。"
 
-#: tdeio/global.cpp:752
+#: tdeio/global.cpp:751
 msgid "Try moving the current file out of the way first, and then try again."
 msgstr "請先把現有的檔案移開，再重試。"
 
-#: tdeio/global.cpp:754
+#: tdeio/global.cpp:753
 msgid "Delete the current file and try again."
 msgstr "請先刪除現有的檔案，再重試。"
 
-#: tdeio/global.cpp:755
+#: tdeio/global.cpp:754
 msgid "Choose an alternate filename for the new file."
 msgstr "請為新檔案選擇另一個檔名。"
 
-#: tdeio/global.cpp:759 tdeio/job.cpp:2973
+#: tdeio/global.cpp:758 tdeio/job.cpp:2973
 msgid "Folder Already Exists"
 msgstr "資料夾已存在"
 
-#: tdeio/global.cpp:760
+#: tdeio/global.cpp:759
 msgid ""
 "The requested folder could not be created because a folder with the same "
 "name already exists."
 msgstr "無法建立要求的資料夾，因為已經有另一個同名的資料夾存在了。"
 
-#: tdeio/global.cpp:762
+#: tdeio/global.cpp:761
 msgid "Try moving the current folder out of the way first, and then try again."
 msgstr "請先把現有的資料夾移開，再重試。"
 
-#: tdeio/global.cpp:764
+#: tdeio/global.cpp:763
 msgid "Delete the current folder and try again."
 msgstr "請先刪除現有的資料夾，再重試。"
 
-#: tdeio/global.cpp:765
+#: tdeio/global.cpp:764
 msgid "Choose an alternate name for the new folder."
 msgstr "請為新資料夾選擇另一個名稱。"
 
-#: tdeio/global.cpp:769
+#: tdeio/global.cpp:768
 msgid "Unknown Host"
 msgstr "不明的主機"
 
-#: tdeio/global.cpp:770
+#: tdeio/global.cpp:769
 msgid ""
 "An unknown host error indicates that the server with the requested name, "
 "<strong>%1</strong>, could not be located on the Internet."
@@ -3747,63 +3748,63 @@ msgstr ""
 "「不明的主機」這個錯誤，表示在網際網路上找不到所要求的、名為 <strong>%1</"
 "strong> 的伺服器。"
 
-#: tdeio/global.cpp:773
+#: tdeio/global.cpp:772
 msgid ""
 "The name that you typed, %1, may not exist: it may be incorrectly typed."
 msgstr "您鍵入的名稱「%1」可能不存在：可能打錯字了。"
 
-#: tdeio/global.cpp:780
+#: tdeio/global.cpp:779
 msgid "Access Denied"
 msgstr "拒絕存取"
 
-#: tdeio/global.cpp:781
+#: tdeio/global.cpp:780
 msgid "Access was denied to the specified resource, <strong>%1</strong>."
 msgstr "指定的資源 <strong>%1</strong> 拒絕存取。"
 
-#: tdeio/global.cpp:783 tdeio/global.cpp:999
+#: tdeio/global.cpp:782 tdeio/global.cpp:998
 msgid "You may have supplied incorrect authentication details or none at all."
 msgstr "您可能提供了不正確的，或完全沒有提供認證細節。"
 
-#: tdeio/global.cpp:785 tdeio/global.cpp:1001
+#: tdeio/global.cpp:784 tdeio/global.cpp:1000
 msgid "Your account may not have permission to access the specified resource."
 msgstr "您的帳號可能沒有權限存取指定的資源。"
 
-#: tdeio/global.cpp:787 tdeio/global.cpp:1003 tdeio/global.cpp:1015
+#: tdeio/global.cpp:786 tdeio/global.cpp:1002 tdeio/global.cpp:1014
 msgid ""
 "Retry the request and ensure your authentication details are entered "
 "correctly."
 msgstr "請確定輸入正確的認證細節，再重試要求。"
 
-#: tdeio/global.cpp:793
+#: tdeio/global.cpp:792
 msgid "Write Access Denied"
 msgstr "拒絕寫入存取"
 
-#: tdeio/global.cpp:794
+#: tdeio/global.cpp:793
 msgid ""
 "This means that an attempt to write to the file <strong>%1</strong> was "
 "rejected."
 msgstr "這就是說，試圖寫入檔案 <strong>%1</strong> 時被拒絕了。"
 
-#: tdeio/global.cpp:801
+#: tdeio/global.cpp:800
 msgid "Unable to Enter Folder"
 msgstr "無法進入資料夾"
 
-#: tdeio/global.cpp:802
+#: tdeio/global.cpp:801
 msgid ""
 "This means that an attempt to enter (in other words, to open) the requested "
 "folder <strong>%1</strong> was rejected."
 msgstr ""
 "這就是說，試圖進入 (即開啟) 要求的資料夾 <strong>%1</strong> 時被拒絕了。"
 
-#: tdeio/global.cpp:810
+#: tdeio/global.cpp:809
 msgid "Folder Listing Unavailable"
 msgstr "無法取得資料夾列表"
 
-#: tdeio/global.cpp:811
+#: tdeio/global.cpp:810
 msgid "Protocol %1 is not a Filesystem"
 msgstr "該協定 %1 不是一個檔案系統"
 
-#: tdeio/global.cpp:812
+#: tdeio/global.cpp:811
 msgid ""
 "This means that a request was made which requires determining the contents "
 "of the folder, and the TDE program supporting this protocol is unable to do "
@@ -3812,11 +3813,11 @@ msgstr ""
 "這就是說，有個要求需要辨識該資料夾的內容，而支援這個協定的 TDE 程式卻無法這樣"
 "做。"
 
-#: tdeio/global.cpp:820
+#: tdeio/global.cpp:819
 msgid "Cyclic Link Detected"
 msgstr "偵測到循環連結"
 
-#: tdeio/global.cpp:821
+#: tdeio/global.cpp:820
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate "
 "name and/or location. TDE detected a link or series of links that results in "
@@ -3826,29 +3827,29 @@ msgstr ""
 "在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 TDE 偵測到一個"
 "或一系列的連結，形成無限循環──也就是說， 該檔案直接或間接地連結回自己。"
 
-#: tdeio/global.cpp:825 tdeio/global.cpp:847
+#: tdeio/global.cpp:824 tdeio/global.cpp:846
 msgid ""
 "Delete one part of the loop in order that it does not cause an infinite "
 "loop, and try again."
 msgstr "請刪除該循環的一部份，以斷開這個無限循環，再重試。"
 
-#: tdeio/global.cpp:834
+#: tdeio/global.cpp:833
 msgid "Request Aborted By User"
 msgstr "要求已被使用者中止了"
 
-#: tdeio/global.cpp:835 tdeio/global.cpp:1128
+#: tdeio/global.cpp:834 tdeio/global.cpp:1127
 msgid "The request was not completed because it was aborted."
 msgstr "該要求尚未完成，因為已被中止了。"
 
-#: tdeio/global.cpp:837 tdeio/global.cpp:1031 tdeio/global.cpp:1130
+#: tdeio/global.cpp:836 tdeio/global.cpp:1030 tdeio/global.cpp:1129
 msgid "Retry the request."
 msgstr "重試要求。"
 
-#: tdeio/global.cpp:841
+#: tdeio/global.cpp:840
 msgid "Cyclic Link Detected During Copy"
 msgstr "複製時偵測到循環連結"
 
-#: tdeio/global.cpp:842
+#: tdeio/global.cpp:841
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate "
 "name and/or location. During the requested copy operation, TDE detected a "
@@ -3859,51 +3860,51 @@ msgstr ""
 "複製動作時，TDE 偵測到一個或一系列的連結， 形成無限循環──也就是說，該檔案直接"
 "或間接地連結回自己。"
 
-#: tdeio/global.cpp:852
+#: tdeio/global.cpp:851
 msgid "Could Not Create Network Connection"
 msgstr "無法建立網路連線"
 
-#: tdeio/global.cpp:853
+#: tdeio/global.cpp:852
 msgid "Could Not Create Socket"
 msgstr "無法建立 Socket"
 
-#: tdeio/global.cpp:854
+#: tdeio/global.cpp:853
 msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be created."
 msgstr ""
 "這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。"
 
-#: tdeio/global.cpp:856 tdeio/global.cpp:969 tdeio/global.cpp:980
-#: tdeio/global.cpp:989
+#: tdeio/global.cpp:855 tdeio/global.cpp:968 tdeio/global.cpp:979
+#: tdeio/global.cpp:988
 msgid ""
 "The network connection may be incorrectly configured, or the network "
 "interface may not be enabled."
 msgstr "可能是網路連線設定不正確，或是網路介面未啟動。"
 
-#: tdeio/global.cpp:862
+#: tdeio/global.cpp:861
 msgid "Connection to Server Refused"
 msgstr "連線到伺服器被拒絕"
 
-#: tdeio/global.cpp:863
+#: tdeio/global.cpp:862
 msgid ""
 "The server <strong>%1</strong> refused to allow this computer to make a "
 "connection."
 msgstr "伺服器 <strong>%1</strong> 拒絕了這部電腦的連線請求。"
 
-#: tdeio/global.cpp:865
+#: tdeio/global.cpp:864
 msgid ""
 "The server, while currently connected to the Internet, may not be configured "
 "to allow requests."
 msgstr "該伺服器雖然在網際網路上，但可能設定為不允許外來的連線請求。"
 
-#: tdeio/global.cpp:867
+#: tdeio/global.cpp:866
 msgid ""
 "The server, while currently connected to the Internet, may not be running "
 "the requested service (%1)."
 msgstr "該伺服器雖然在網際網路上，但是可能沒有執行所需的服務 (%1)。"
 
-#: tdeio/global.cpp:869
+#: tdeio/global.cpp:868
 msgid ""
 "A network firewall (a device which restricts Internet requests), either "
 "protecting your network or the network of the server, may have intervened, "
@@ -3912,32 +3913,32 @@ msgstr ""
 "可能有個保護您的網路或伺服器的網路的防火牆 (限制網際網路請求的裝置) 干預，妨"
 "礙了這個要求。"
 
-#: tdeio/global.cpp:876
+#: tdeio/global.cpp:875
 msgid "Connection to Server Closed Unexpectedly"
 msgstr "往伺服器的連線意外地關閉了"
 
-#: tdeio/global.cpp:877
+#: tdeio/global.cpp:876
 msgid ""
 "Although a connection was established to <strong>%1</strong>, the connection "
 "was closed at an unexpected point in the communication."
 msgstr ""
 "雖然往 <strong>%1</strong> 的連線已經設立了，但通訊其間這個連線意外地中斷了。"
 
-#: tdeio/global.cpp:880
+#: tdeio/global.cpp:879
 msgid ""
 "A protocol error may have occurred, causing the server to close the "
 "connection as a response to the error."
 msgstr "可能發生了一個協定錯誤，導致伺服器回應錯誤而關閉連線。"
 
-#: tdeio/global.cpp:886
+#: tdeio/global.cpp:885
 msgid "URL Resource Invalid"
 msgstr "無效的 URL 資源"
 
-#: tdeio/global.cpp:887
+#: tdeio/global.cpp:886
 msgid "Protocol %1 is not a Filter Protocol"
 msgstr "該協定 %1 不是一個過濾協定"
 
-#: tdeio/global.cpp:888
+#: tdeio/global.cpp:887
 msgid ""
 "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) that you entered did not refer to a valid mechanism of "
@@ -3947,7 +3948,7 @@ msgstr ""
 "strong>ocator (URL) 並不指向有效的機制，無法存取特定的資源 <strong>%1%2</"
 "strong>。"
 
-#: tdeio/global.cpp:893
+#: tdeio/global.cpp:892
 msgid ""
 "TDE is able to communicate through a protocol within a protocol. This "
 "request specified a protocol be used as such, however this protocol is not "
@@ -3957,22 +3958,22 @@ msgstr ""
 "TDE 能夠在一個協定裡透過另一個協定進行通訊。現在要求指定該協定用作這種過濾用"
 "途，但該協定不能用作過濾用途。這個錯誤比較罕見，大概是編程出錯了。"
 
-#: tdeio/global.cpp:901
+#: tdeio/global.cpp:900
 msgid "Unable to Initialize Input/Output Device"
 msgstr "無法初始化輸入/輸出裝置"
 
-#: tdeio/global.cpp:902
+#: tdeio/global.cpp:901
 msgid "Could Not Mount Device"
 msgstr "無法裝載裝置"
 
-#: tdeio/global.cpp:903
+#: tdeio/global.cpp:902
 msgid ""
 "The requested device could not be initialized (\"mounted\"). The reported "
 "error was: <strong>%1</strong>"
 msgstr ""
 "無法初始化 (裝載, mount) 您所要求的裝置。報告的錯誤是：<strong>%1</strong>"
 
-#: tdeio/global.cpp:906
+#: tdeio/global.cpp:905
 msgid ""
 "The device may not be ready, for example there may be no media in a "
 "removable media device (i.e. no CD-ROM in a CD drive), or in the case of a "
@@ -3981,7 +3982,7 @@ msgstr ""
 "該裝置可能未就緒，例如某抽取式媒體裝置裡可能沒有媒體 (光碟機裡沒有光碟)，或"
 "者，對週邊/可攜式裝置而言，可能該裝置的連線不正確。"
 
-#: tdeio/global.cpp:910
+#: tdeio/global.cpp:909
 msgid ""
 "You may not have permissions to initialize (\"mount\") the device. On UNIX "
 "systems, often system administrator privileges are required to initialize a "
@@ -3990,7 +3991,7 @@ msgstr ""
 "您可能沒有權限初始化 (裝載, mount) 該裝置。在 UNIX 系統上，通常需要系統管理員"
 "的權限，才能初始化裝置。"
 
-#: tdeio/global.cpp:914
+#: tdeio/global.cpp:913
 msgid ""
 "Check that the device is ready; removable drives must contain media, and "
 "portable devices must be connected and powered on.; and try again."
@@ -3998,15 +3999,15 @@ msgstr ""
 "請檢查該裝置是否就緒：抽取式磁碟機或光碟機裡必須有媒體，而可攜式裝置必須已連"
 "接和打開電源；再重試。"
 
-#: tdeio/global.cpp:920
+#: tdeio/global.cpp:919
 msgid "Unable to Uninitialize Input/Output Device"
 msgstr "無法反初始化輸入/輸出裝置"
 
-#: tdeio/global.cpp:921
+#: tdeio/global.cpp:920
 msgid "Could Not Unmount Device"
 msgstr "無法卸載裝置"
 
-#: tdeio/global.cpp:922
+#: tdeio/global.cpp:921
 msgid ""
 "The requested device could not be uninitialized (\"unmounted\"). The "
 "reported error was: <strong>%1</strong>"
@@ -4014,7 +4015,7 @@ msgstr ""
 "無法反初始化 (卸載, ummount) 您所要求的裝置。報告的錯誤是：<strong>%1</"
 "strong>"
 
-#: tdeio/global.cpp:925
+#: tdeio/global.cpp:924
 msgid ""
 "The device may be busy, that is, still in use by another application or "
 "user. Even such things as having an open browser window on a location on "
@@ -4023,7 +4024,7 @@ msgstr ""
 "該裝置可能正在忙碌中，也就是說，可能有使用者或應用程式仍然在使用它。儘管只是"
 "有個開啟了的瀏覽器視窗在該裝置的某個位置上，也足以使該裝置停留在使用中狀態。"
 
-#: tdeio/global.cpp:929
+#: tdeio/global.cpp:928
 msgid ""
 "You may not have permissions to uninitialize (\"unmount\") the device. On "
 "UNIX systems, system administrator privileges are often required to "
@@ -4032,15 +4033,15 @@ msgstr ""
 "您可能沒有權限反初始化 (卸載, ummount) 該裝置。在 UNIX 系統上，通常需要系統管"
 "理員的權限，才能初始化裝置。"
 
-#: tdeio/global.cpp:933
+#: tdeio/global.cpp:932
 msgid "Check that no applications are accessing the device, and try again."
 msgstr "檢查沒有應用程式正在存取該裝置，再重試。"
 
-#: tdeio/global.cpp:938
+#: tdeio/global.cpp:937
 msgid "Cannot Read From Resource"
 msgstr "無法讀入資源"
 
-#: tdeio/global.cpp:939
+#: tdeio/global.cpp:938
 msgid ""
 "This means that although the resource, <strong>%1</strong>, was able to be "
 "opened, an error occurred while reading the contents of the resource."
@@ -4048,15 +4049,15 @@ msgstr ""
 "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但讀入這個資源的內容時發"
 "生錯誤。"
 
-#: tdeio/global.cpp:942
+#: tdeio/global.cpp:941
 msgid "You may not have permissions to read from the resource."
 msgstr "您可能沒有權限讀入該資源。"
 
-#: tdeio/global.cpp:951
+#: tdeio/global.cpp:950
 msgid "Cannot Write to Resource"
 msgstr "無法寫入資源"
 
-#: tdeio/global.cpp:952
+#: tdeio/global.cpp:951
 msgid ""
 "This means that although the resource, <strong>%1</strong>, was able to be "
 "opened, an error occurred while writing to the resource."
@@ -4064,19 +4065,19 @@ msgstr ""
 "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但寫入這個資源時發生錯"
 "誤。"
 
-#: tdeio/global.cpp:955
+#: tdeio/global.cpp:954
 msgid "You may not have permissions to write to the resource."
 msgstr "您可能沒有權限寫入該資源。"
 
-#: tdeio/global.cpp:964 tdeio/global.cpp:975
+#: tdeio/global.cpp:963 tdeio/global.cpp:974
 msgid "Could Not Listen for Network Connections"
 msgstr "無法聽候網路連線"
 
-#: tdeio/global.cpp:965
+#: tdeio/global.cpp:964
 msgid "Could Not Bind"
 msgstr "無法 Bind"
 
-#: tdeio/global.cpp:966 tdeio/global.cpp:977
+#: tdeio/global.cpp:965 tdeio/global.cpp:976
 msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be established to listen for incoming "
@@ -4085,43 +4086,43 @@ msgstr ""
 "這是一個相當技術性的錯誤，無法設立所需的網路通訊裝置 (socket, 承接口) 以聽候 "
 "(listen) 內進的網路連線。"
 
-#: tdeio/global.cpp:976
+#: tdeio/global.cpp:975
 msgid "Could Not Listen"
 msgstr "無法聽候"
 
-#: tdeio/global.cpp:986
+#: tdeio/global.cpp:985
 msgid "Could Not Accept Network Connection"
 msgstr "無法接受網路連線"
 
-#: tdeio/global.cpp:987
+#: tdeio/global.cpp:986
 msgid ""
 "This is a fairly technical error in which an error occurred while attempting "
 "to accept an incoming network connection."
 msgstr "這是一個相當技術性的錯誤，試圖接受 (accept) 內進的網路連線時發生錯誤。"
 
-#: tdeio/global.cpp:991
+#: tdeio/global.cpp:990
 msgid "You may not have permissions to accept the connection."
 msgstr "您可能沒有權限接受該連線。"
 
-#: tdeio/global.cpp:996
+#: tdeio/global.cpp:995
 #, c-format
 msgid "Could Not Login: %1"
 msgstr "無法登入：%1"
 
-#: tdeio/global.cpp:997
+#: tdeio/global.cpp:996
 msgid ""
 "An attempt to login to perform the requested operation was unsuccessful."
 msgstr "剛試圖登入以執行要求的作業，但不成功。"
 
-#: tdeio/global.cpp:1008
+#: tdeio/global.cpp:1007
 msgid "Could Not Determine Resource Status"
 msgstr "無法查詢資源狀態"
 
-#: tdeio/global.cpp:1009
+#: tdeio/global.cpp:1008
 msgid "Could Not Stat Resource"
 msgstr "無法查詢資源狀態"
 
-#: tdeio/global.cpp:1010
+#: tdeio/global.cpp:1009
 msgid ""
 "An attempt to determine information about the status of the resource <strong>"
 "%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
@@ -4129,55 +4130,55 @@ msgstr ""
 "剛試圖查詢關於資源 <strong>%1</strong> 狀態的資訊，例如資源名稱、類型、大小等"
 "等，但不成功。"
 
-#: tdeio/global.cpp:1013
+#: tdeio/global.cpp:1012
 msgid "The specified resource may not have existed or may not be accessible."
 msgstr "指定的資源可能不存在或無法存取。"
 
-#: tdeio/global.cpp:1021
+#: tdeio/global.cpp:1020
 msgid "Could Not Cancel Listing"
 msgstr "無法取消內容列表"
 
-#: tdeio/global.cpp:1022
+#: tdeio/global.cpp:1021
 msgid "FIXME: Document this"
 msgstr "FIXME: Document this, 尚未為此項目寫說明文件"
 
-#: tdeio/global.cpp:1026
+#: tdeio/global.cpp:1025
 msgid "Could Not Create Folder"
 msgstr "無法建立資料夾"
 
-#: tdeio/global.cpp:1027
+#: tdeio/global.cpp:1026
 msgid "An attempt to create the requested folder failed."
 msgstr "剛試圖建立要求的資料夾，但失敢了。"
 
-#: tdeio/global.cpp:1028
+#: tdeio/global.cpp:1027
 msgid "The location where the folder was to be created may not exist."
 msgstr "要建立資料夾的位置可能不存在。"
 
-#: tdeio/global.cpp:1035
+#: tdeio/global.cpp:1034
 msgid "Could Not Remove Folder"
 msgstr "無法移除資料夾"
 
-#: tdeio/global.cpp:1036
+#: tdeio/global.cpp:1035
 msgid "An attempt to remove the specified folder, <strong>%1</strong>, failed."
 msgstr "剛試圖移除指定的資料夾， <strong>%1</strong>，但失敢了。"
 
-#: tdeio/global.cpp:1038
+#: tdeio/global.cpp:1037
 msgid "The specified folder may not exist."
 msgstr "指定的資料夾可能不存在。"
 
-#: tdeio/global.cpp:1039
+#: tdeio/global.cpp:1038
 msgid "The specified folder may not be empty."
 msgstr "指定的資料夾可能不是空的。"
 
-#: tdeio/global.cpp:1042
+#: tdeio/global.cpp:1041
 msgid "Ensure that the folder exists and is empty, and try again."
 msgstr "請確定該資料夾存在，而且是空的，再重試。"
 
-#: tdeio/global.cpp:1047
+#: tdeio/global.cpp:1046
 msgid "Could Not Resume File Transfer"
 msgstr "無法恢復檔案傳送"
 
-#: tdeio/global.cpp:1048
+#: tdeio/global.cpp:1047
 msgid ""
 "The specified request asked that the transfer of file <strong>%1</strong> be "
 "resumed at a certain point of the transfer. This was not possible."
@@ -4185,55 +4186,55 @@ msgstr ""
 "在傳送檔案 <strong>%1</strong> 中途時，指定要求重新繼續傳送的請求。這是不可能"
 "的。"
 
-#: tdeio/global.cpp:1051
+#: tdeio/global.cpp:1050
 msgid "The protocol, or the server, may not support file resuming."
 msgstr "此通訊協定或伺服器可能不支援檔案續傳。"
 
-#: tdeio/global.cpp:1053
+#: tdeio/global.cpp:1052
 msgid "Retry the request without attempting to resume transfer."
 msgstr "重新連線而不重複使用之前的連線。"
 
-#: tdeio/global.cpp:1058
+#: tdeio/global.cpp:1057
 msgid "Could Not Rename Resource"
 msgstr "無法重新命名資源"
 
-#: tdeio/global.cpp:1059
+#: tdeio/global.cpp:1058
 msgid "An attempt to rename the specified resource <strong>%1</strong> failed."
 msgstr "剛試圖重新命名指定的資源 <strong>%1</strong>，但失敗了。"
 
-#: tdeio/global.cpp:1067
+#: tdeio/global.cpp:1066
 msgid "Could Not Alter Permissions of Resource"
 msgstr "無法變更資源的權限"
 
-#: tdeio/global.cpp:1068
+#: tdeio/global.cpp:1067
 msgid ""
 "An attempt to alter the permissions on the specified resource <strong>%1</"
 "strong> failed."
 msgstr "剛試圖變更指定的資源 <strong>%1</strong> 的權限，但失敗了。"
 
-#: tdeio/global.cpp:1075
+#: tdeio/global.cpp:1074
 msgid "Could Not Delete Resource"
 msgstr "無法刪除資源"
 
-#: tdeio/global.cpp:1076
+#: tdeio/global.cpp:1075
 msgid "An attempt to delete the specified resource <strong>%1</strong> failed."
 msgstr "剛試圖刪除指定的資源 <strong>%1</strong>，但失敗了。"
 
-#: tdeio/global.cpp:1083
+#: tdeio/global.cpp:1082
 msgid "Unexpected Program Termination"
 msgstr "非預期的程式終止。"
 
-#: tdeio/global.cpp:1084
+#: tdeio/global.cpp:1083
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has unexpectedly terminated."
 msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式意外地突然終止了。"
 
-#: tdeio/global.cpp:1092
+#: tdeio/global.cpp:1091
 msgid "Out of Memory"
 msgstr "記憶體不足"
 
-#: tdeio/global.cpp:1093
+#: tdeio/global.cpp:1092
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol could not obtain the memory required to continue."
@@ -4241,11 +4242,11 @@ msgstr ""
 "在您的電腦上提供 <strong>%1</strong> 協定存取的程式未能取得所需的記憶體，無法"
 "繼續。"
 
-#: tdeio/global.cpp:1101
+#: tdeio/global.cpp:1100
 msgid "Unknown Proxy Host"
 msgstr "不明的代理伺服器主機"
 
-#: tdeio/global.cpp:1102
+#: tdeio/global.cpp:1101
 msgid ""
 "While retrieving information about the specified proxy host, <strong>%1</"
 "strong>, an Unknown Host error was encountered. An unknown host error "
@@ -4254,7 +4255,7 @@ msgstr ""
 "當抓取特定的 proxy 主機 <strong>%1</strong> 時，發生找不到主機的錯誤。該錯誤"
 "通常代表該主機名稱在網際網路上找不到。"
 
-#: tdeio/global.cpp:1106
+#: tdeio/global.cpp:1105
 msgid ""
 "There may have been a problem with your network configuration, specifically "
 "your proxy's hostname. If you have been accessing the Internet with no "
@@ -4263,15 +4264,15 @@ msgstr ""
 "您的網路設定可能有問題，特別是您的 proxy 主機名稱。如果您最近曾經很正常的使用"
 "網路，那一定有問題。"
 
-#: tdeio/global.cpp:1110
+#: tdeio/global.cpp:1109
 msgid "Double-check your proxy settings and try again."
 msgstr "請再三檢查您的代理伺服器設定，然後再重試。"
 
-#: tdeio/global.cpp:1115
+#: tdeio/global.cpp:1114
 msgid "Authentication Failed: Method %1 Not Supported"
 msgstr "授權失敗：不支援 %1 認證方式"
 
-#: tdeio/global.cpp:1117
+#: tdeio/global.cpp:1116
 #, c-format
 msgid ""
 "Although you may have supplied the correct authentication details, the "
@@ -4281,7 +4282,7 @@ msgstr ""
 "隨然您或許還沒有提供正確的授權方式，這次授權動作已經失敗了。這樣因為伺服器所"
 "提供的授權方式，TDE 程式所實做的 %1 協定中並不支援。"
 
-#: tdeio/global.cpp:1121
+#: tdeio/global.cpp:1120
 #, fuzzy
 msgid ""
 "Please file a bug at <a href=\"http://bugs.trinitydesktop.org/\">http://bugs."
@@ -4291,42 +4292,42 @@ msgstr ""
 "請在 <a href=\"http://bugs.trinitydesktop.org/\">http://bugs.trinitydesktop."
 "org/</a> 做一個錯誤登記，以便告知 TDE 團隊這個不被支援的驗證方式。"
 
-#: tdeio/global.cpp:1127
+#: tdeio/global.cpp:1126
 msgid "Request Aborted"
 msgstr "要求中止"
 
-#: tdeio/global.cpp:1134
+#: tdeio/global.cpp:1133
 msgid "Internal Error in Server"
 msgstr "伺服器內部錯誤"
 
-#: tdeio/global.cpp:1135
+#: tdeio/global.cpp:1134
 msgid ""
 "The program on the server which provides access to the <strong>%1</strong> "
 "protocol has reported an internal error: %0."
 msgstr "伺服器上提供 <strong>%1</strong> 協定的存取的程式報告內部錯誤：%0。"
 
-#: tdeio/global.cpp:1138
+#: tdeio/global.cpp:1137
 msgid ""
 "This is most likely to be caused by a bug in the server program. Please "
 "consider submitting a full bug report as detailed below."
 msgstr ""
 "這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。"
 
-#: tdeio/global.cpp:1141
+#: tdeio/global.cpp:1140
 msgid "Contact the administrator of the server to advise them of the problem."
 msgstr "請聯繫伺服器的管理員，報告這個問題。"
 
-#: tdeio/global.cpp:1143
+#: tdeio/global.cpp:1142
 msgid ""
 "If you know who the authors of the server software are, submit the bug "
 "report directly to them."
 msgstr "如果您知道誰是該伺服器軟體的作者，請直接把錯誤報告提交給他們。"
 
-#: tdeio/global.cpp:1148
+#: tdeio/global.cpp:1147
 msgid "Timeout Error"
 msgstr "逾時錯誤"
 
-#: tdeio/global.cpp:1149
+#: tdeio/global.cpp:1148
 msgid ""
 "Although contact was made with the server, a response was not received "
 "within the amount of time allocated for the request as follows:"
@@ -4340,15 +4341,15 @@ msgstr ""
 "li><li>存取代理伺服器逾時時限：%3 秒</li></ul>註：您可以在 TDE 控制中心，選"
 "擇 [網路] -> [偏好設定]，以變更這些逾時時限設定。"
 
-#: tdeio/global.cpp:1160
+#: tdeio/global.cpp:1159
 msgid "The server was too busy responding to other requests to respond."
 msgstr "伺服器太忙碌回應其他請求，所以暫時未能回應您的請求。"
 
-#: tdeio/global.cpp:1166
+#: tdeio/global.cpp:1165
 msgid "Unknown Error"
 msgstr "不明的錯誤"
 
-#: tdeio/global.cpp:1167
+#: tdeio/global.cpp:1166
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has reported an unknown error: %2."
@@ -4356,11 +4357,11 @@ msgstr ""
 "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一個不明的錯誤："
 "%2。"
 
-#: tdeio/global.cpp:1175
+#: tdeio/global.cpp:1174
 msgid "Unknown Interruption"
 msgstr "不明的中斷"
 
-#: tdeio/global.cpp:1176
+#: tdeio/global.cpp:1175
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has reported an interruption of an unknown type: %2."
@@ -4368,11 +4369,11 @@ msgstr ""
 "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一種類型不明的中"
 "斷：%2。"
 
-#: tdeio/global.cpp:1184
+#: tdeio/global.cpp:1183
 msgid "Could Not Delete Original File"
 msgstr "無法刪除原本的檔案"
 
-#: tdeio/global.cpp:1185
+#: tdeio/global.cpp:1184
 msgid ""
 "The requested operation required the deleting of the original file, most "
 "likely at the end of a file move operation. The original file <strong>%1</"
@@ -4381,11 +4382,11 @@ msgstr ""
 "要求的作業需要刪除原本的檔案，多數是移動檔案時最後一個動作。可是，現在無法刪"
 "除原本的檔案 <strong>%1</strong>。"
 
-#: tdeio/global.cpp:1194
+#: tdeio/global.cpp:1193
 msgid "Could Not Delete Temporary File"
 msgstr "無法刪除暫存檔案"
 
-#: tdeio/global.cpp:1195
+#: tdeio/global.cpp:1194
 msgid ""
 "The requested operation required the creation of a temporary file in which "
 "to save the new file while being downloaded. This temporary file <strong>%1</"
@@ -4394,11 +4395,11 @@ msgstr ""
 "要求的作業需要建立一個暫存檔案，以儲存下載中的新檔案。可是，現在無法刪除該暫"
 "存檔案 <strong>%1</strong>。"
 
-#: tdeio/global.cpp:1204
+#: tdeio/global.cpp:1203
 msgid "Could Not Rename Original File"
 msgstr "無法重新命名原本檔案"
 
-#: tdeio/global.cpp:1205
+#: tdeio/global.cpp:1204
 msgid ""
 "The requested operation required the renaming of the original file <strong>"
 "%1</strong>, however it could not be renamed."
@@ -4406,11 +4407,11 @@ msgstr ""
 "要求的作業需要重新命名原本的檔案 <strong>%1</strong>，然而現在卻無法為它重新"
 "命名。"
 
-#: tdeio/global.cpp:1213
+#: tdeio/global.cpp:1212
 msgid "Could Not Rename Temporary File"
 msgstr "無法重新命名暫存檔案"
 
-#: tdeio/global.cpp:1214
+#: tdeio/global.cpp:1213
 msgid ""
 "The requested operation required the creation of a temporary file <strong>"
 "%1</strong>, however it could not be created."
@@ -4418,33 +4419,33 @@ msgstr ""
 "要求的作業需要建立一個暫存檔案 <strong>%1</strong>，然而現在無法建立該暫存檔"
 "案。"
 
-#: tdeio/global.cpp:1222
+#: tdeio/global.cpp:1221
 msgid "Could Not Create Link"
 msgstr "無法建立連結"
 
-#: tdeio/global.cpp:1223
+#: tdeio/global.cpp:1222
 msgid "Could Not Create Symbolic Link"
 msgstr "無法建立符號連結"
 
-#: tdeio/global.cpp:1224
+#: tdeio/global.cpp:1223
 msgid "The requested symbolic link %1 could not be created."
 msgstr "要求的符號連結 %1 無法建立。"
 
-#: tdeio/global.cpp:1231
+#: tdeio/global.cpp:1230
 msgid "No Content"
 msgstr "無內容"
 
-#: tdeio/global.cpp:1236
+#: tdeio/global.cpp:1235
 msgid "Disk Full"
 msgstr "磁碟已滿"
 
-#: tdeio/global.cpp:1237
+#: tdeio/global.cpp:1236
 msgid ""
 "The requested file <strong>%1</strong> could not be written to as there is "
 "inadequate disk space."
 msgstr "要求的檔案 <strong>%1</strong> 無法寫入，因為磁碟空間不足。"
 
-#: tdeio/global.cpp:1239
+#: tdeio/global.cpp:1238
 msgid ""
 "Free up enough disk space by 1) deleting unwanted and temporary files; 2) "
 "archiving files to removable media storage such as CD-Recordable discs; or "
@@ -4453,21 +4454,21 @@ msgstr ""
 "請以下列方法釋放足夠的磁碟空間： 1) 刪除不需的或暫存的檔案； 2) 把檔案歸檔至"
 "抽取式媒體存儲，例如 CD-R 可燒錄光碟； 3) 取得更多存儲容量。"
 
-#: tdeio/global.cpp:1246
+#: tdeio/global.cpp:1245
 msgid "Source and Destination Files Identical"
 msgstr "來源跟目的都是同一個檔案"
 
-#: tdeio/global.cpp:1247
+#: tdeio/global.cpp:1246
 msgid ""
 "The operation could not be completed because the source and destination "
 "files are the same file."
 msgstr "無法完成作業，因為來源跟目的都是同一個檔案。"
 
-#: tdeio/global.cpp:1249
+#: tdeio/global.cpp:1248
 msgid "Choose a different filename for the destination file."
 msgstr "請為目的檔案選擇另一個檔名。"
 
-#: tdeio/global.cpp:1260
+#: tdeio/global.cpp:1259
 msgid "Undocumented Error"
 msgstr "未有說明的錯誤"
 
@@ -6150,6 +6151,17 @@ msgstr ""
 #~ msgid "Unknown unmount error."
 #~ msgstr "不明的錯誤"
 
+#~ msgid ""
+#~ "You may perform a search on the Internet for a TDE program (called a "
+#~ "tdeioslave or ioslave) which supports this protocol. Places to search "
+#~ "include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a "
+#~ "href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
+#~ msgstr ""
+#~ "您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 "
+#~ "ioslave)。建議從 <a href=\"http://kde-apps.org/\">http://kde-apps.org/</"
+#~ "a> 和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a> 這兩個地"
+#~ "方搜尋。"
+
 #, fuzzy
 #~ msgid "Bookmarks"
 #~ msgstr "書籤"
diff --git a/tde-i18n-zh_TW/messages/tdelibs/tdeprint.po b/tde-i18n-zh_TW/messages/tdelibs/tdeprint.po
index 33b3d229186..2e35c62242c 100644
--- a/tde-i18n-zh_TW/messages/tdelibs/tdeprint.po
+++ b/tde-i18n-zh_TW/messages/tdelibs/tdeprint.po
@@ -12,7 +12,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdeprint\n"
-"POT-Creation-Date: 2019-01-13 18:46+0100\n"
+"POT-Creation-Date: 2019-07-21 21:14+0200\n"
 "PO-Revision-Date: 2006-12-18 13:08+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -1490,19 +1490,19 @@ msgid ""
 " <qt>  <p><b>Margins</b></p>  <p>These settings control the margins of "
 "printouts on the paper. They are not valid for  jobs originating from "
 "applications which define their own page layout internally and  send "
-"PostScript to TDEPrint (such as KOffice or OpenOffice.org). </p>  <p>When "
-"printing from TDE applications, such as KMail and Konqueror, or printing an "
-"ASCII text  file through kprinter, you can choose your preferred margin "
-"settings here. </p>  <p>Margins may be set individually for each edge of the "
-"paper. The combo box at the bottom lets you change  the units of measurement "
-"between Pixels, Millimeters, Centimeters, and Inches. </p>  <p>You can even "
-"use the mouse to grab one margin and drag it to the intended position (see "
-"the  preview picture on the right side). </p>  <hr>  <p><em><b>Additional "
-"hint for power users:</b> This TDEPrint GUI element matches  with the CUPS "
-"commandline job option parameter:</em>  <pre>     -o page-top=...      # "
-"example: \"72\"  <br>     -o page-bottom=...   # example: \"24\"  <br>     -"
-"o page-left=...     # example: \"36\"  <br>     -o page-right=...    # "
-"example: \"12\"  </pre> </p>  </qt>"
+"PostScript to TDEPrint (such as KOffice, OpenOffice or LibreOffice). </p>  "
+"<p>When printing from TDE applications, such as KMail and Konqueror, or "
+"printing an ASCII text  file through kprinter, you can choose your preferred "
+"margin settings here. </p>  <p>Margins may be set individually for each edge "
+"of the paper. The combo box at the bottom lets you change  the units of "
+"measurement between Pixels, Millimeters, Centimeters, and Inches. </p>  "
+"<p>You can even use the mouse to grab one margin and drag it to the intended "
+"position (see the  preview picture on the right side). </p>  <hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  <pre>     -o "
+"page-top=...      # example: \"72\"  <br>     -o page-bottom=...   # "
+"example: \"24\"  <br>     -o page-left=...     # example: \"36\"  <br>     -"
+"o page-right=...    # example: \"12\"  </pre> </p>  </qt>"
 msgstr ""
 "<qt> <p><b>邊界</b></p> <p>這些設定控制列印輸出在紙張上的邊界留白大小。如果是"
 "直接透過應用程式送來的列印工作，通常他們會定義自己的輸出版面，因此這個設定會"
@@ -1845,15 +1845,15 @@ msgstr "<qt><b>全部列印：</b>選擇「全部」印出整份文件。這是�
 msgid ""
 " <qt><b>Current Page:</b> Select <em>\"Current\"</em> if you want  to print "
 "the page currently visible in your TDE application.</p> <p><b>Note:</b> this "
-"field is disabled if you print from non-TDE applications like Mozilla or "
-"OpenOffice.org, since here TDEPrint has no means to determine which document "
-"page you are currently viewing.</p></qt>"
+"field is disabled if you print from non-TDE applications like Firefox, "
+"PaleMoon, SeaMonkey or OpenOffice and LibreOffice, since here TDEPrint has "
+"no means to determine which document page you are currently viewing.</p></qt>"
 msgstr ""
 "<qt><b>目前的頁面：</b>選擇「目前」則只印出目前您應用程式上觀看的那一頁。</"
 "p> <p><b>注意：</b>如果您不是從 TDE 應用程式中列印，則這一欄會被關閉，因為 "
 "TDEPrint 無法決定您目前在觀看文件的第幾頁。</p></qt>"
 
-#: kpcopiespage.cpp:60
+#: kpcopiespage.cpp:61
 msgid ""
 " <qt><b>Page Range:</b> Choose a \"Page Range\" to select a subset of the "
 "complete document pages to be printed. The format is <em>\"n,m,o-p,q,r,s-t, u"
@@ -1871,7 +1871,7 @@ msgstr ""
 "<pre>     -o page-ranges=...     # 例：\"4,6,10-13,17,20,23-25\"</pre></p></"
 "qt>"
 
-#: kpcopiespage.cpp:74
+#: kpcopiespage.cpp:75
 msgid ""
 " <qt><b>Page Set:</b> <p>Choose <em>\"All Pages\"</em>, <em>\"Even Pages\"</"
 "em> or <em>\"Odd Pages\"</em> if you want to print a page selection matching "
@@ -1899,7 +1899,7 @@ msgstr ""
 "數是一樣的： <pre>     -o page-set=...     # 例：\"odd\" 或 \"even</pre></"
 "p></qt>"
 
-#: kpcopiespage.cpp:97
+#: kpcopiespage.cpp:98
 msgid ""
 " <qt><b>Output Settings:</b> Here you can determine the number of copies, "
 "the output order and the collate mode for the pages of your printjob. (Note, "
@@ -1918,7 +1918,7 @@ msgstr ""
 "outputorder=...     # 例：\"reverse\"<br>      -o Collate=...     # 例："
 "\"true\" 或 \"false\"<br> </pre></p></qt>"
 
-#: kpcopiespage.cpp:115
+#: kpcopiespage.cpp:116
 msgid ""
 " <qt><b>Number of Copies:</b> Determine the number of requested copies here. "
 "You can increase or decrease the number of printed copies by clicking on the "
@@ -1933,7 +1933,7 @@ msgstr ""
 "的 CUPS 命令列選項參數是一樣的： <pre>     -o copies=...     # 例：\"5\" 或 "
 "\"42\"</pre></p></qt>"
 
-#: kpcopiespage.cpp:128
+#: kpcopiespage.cpp:129
 msgid ""
 " <qt><b>Collate Copies</b> <p>If the <em>\"Collate\"</em> checkbox is "
 "enabled (default), the output order for multiple copies of a multi-page "
@@ -1951,7 +1951,7 @@ msgstr ""
 "額外提示：</b>這個選項與以下的 CUPS 命令列選項參數是一樣的： <pre>     -o "
 "Collate=...     # 例：\"true\" 或 \"false\"</pre></p></qt>"
 
-#: kpcopiespage.cpp:142
+#: kpcopiespage.cpp:143
 msgid ""
 " <qt><b>Reverse Order</b> <p> If the <em>\"Reverse\"</em> checkbox is "
 "enabled, the output order for multiple copies of a multi-page document will "
@@ -1971,64 +1971,64 @@ msgstr ""
 "示：</b>這個選項與以下的 CUPS 命令列選項參數是一樣的： <pre>     -o "
 "outputorder=...     # 例：\"reverse\"</pre></p></qt>"
 
-#: kpcopiespage.cpp:163
+#: kpcopiespage.cpp:164
 msgid "C&opies"
 msgstr "列印份數(&O)"
 
-#: kpcopiespage.cpp:167
+#: kpcopiespage.cpp:168
 msgid "Page Selection"
 msgstr "紙張選擇"
 
-#: kpcopiespage.cpp:169
+#: kpcopiespage.cpp:170
 msgid "&All"
 msgstr "全部(&A)"
 
-#: kpcopiespage.cpp:171
+#: kpcopiespage.cpp:172
 msgid "Cu&rrent"
 msgstr "目前(&R)"
 
-#: kpcopiespage.cpp:173
+#: kpcopiespage.cpp:174
 msgid "Ran&ge"
 msgstr "範圍(&G)"
 
-#: kpcopiespage.cpp:178
+#: kpcopiespage.cpp:179
 msgid ""
 "<p>Enter pages or group of pages to print separated by commas (1,2-5,8).</p>"
 msgstr "<p>請輸入要列印頁碼或一系列的頁碼，各頁碼以逗號分開 (1,2-5,8)。</p>"
 
-#: kpcopiespage.cpp:182
+#: kpcopiespage.cpp:183
 msgid "Output Settings"
 msgstr "輸出設定"
 
-#: kpcopiespage.cpp:184
+#: kpcopiespage.cpp:185
 msgid "Co&llate"
 msgstr "裝訂模式(&L)"
 
-#: kpcopiespage.cpp:186
+#: kpcopiespage.cpp:187
 msgid "Re&verse"
 msgstr "反序列印(&V)"
 
-#: kpcopiespage.cpp:191
+#: kpcopiespage.cpp:192
 msgid "Cop&ies:"
 msgstr "列印份數(&I)："
 
-#: kpcopiespage.cpp:198
+#: kpcopiespage.cpp:199
 msgid "All Pages"
 msgstr "整份文件"
 
-#: kpcopiespage.cpp:199
+#: kpcopiespage.cpp:200
 msgid "Odd Pages"
 msgstr "奇數頁"
 
-#: kpcopiespage.cpp:200
+#: kpcopiespage.cpp:201
 msgid "Even Pages"
 msgstr "偶數頁"
 
-#: kpcopiespage.cpp:202
+#: kpcopiespage.cpp:203
 msgid "Page &set:"
 msgstr "頁面設定(&S)："
 
-#: kpcopiespage.cpp:257
+#: kpcopiespage.cpp:258
 msgid "Pages"
 msgstr "頁"
 
@@ -6044,6 +6044,46 @@ msgid "&PageMarks"
 msgstr "頁面標簽(&P)"
 
 #, fuzzy
+#~ msgid ""
+#~ " <qt>  <p><b>Margins</b></p>  <p>These settings control the margins of "
+#~ "printouts on the paper. They are not valid for  jobs originating from "
+#~ "applications which define their own page layout internally and  send "
+#~ "PostScript to TDEPrint (such as KOffice or OpenOffice.org). </p>  <p>When "
+#~ "printing from TDE applications, such as KMail and Konqueror, or printing "
+#~ "an ASCII text  file through kprinter, you can choose your preferred "
+#~ "margin settings here. </p>  <p>Margins may be set individually for each "
+#~ "edge of the paper. The combo box at the bottom lets you change  the units "
+#~ "of measurement between Pixels, Millimeters, Centimeters, and Inches. </"
+#~ "p>  <p>You can even use the mouse to grab one margin and drag it to the "
+#~ "intended position (see the  preview picture on the right side). </p>  "
+#~ "<hr>  <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
+#~ "element matches  with the CUPS commandline job option parameter:</em>  "
+#~ "<pre>     -o page-top=...      # example: \"72\"  <br>     -o page-"
+#~ "bottom=...   # example: \"24\"  <br>     -o page-left=...     # example: "
+#~ "\"36\"  <br>     -o page-right=...    # example: \"12\"  </pre> </p>  </"
+#~ "qt>"
+#~ msgstr ""
+#~ "<qt> <p><b>邊界</b></p> <p>這些設定控制列印輸出在紙張上的邊界留白大小。如"
+#~ "果是直接透過應用程式送來的列印工作，通常他們會定義自己的輸出版面，因此這個"
+#~ "設定會無效。</p> <p><p><b>進階使用者的額外提示：</b>這個選項與以下的 CUPS "
+#~ "命令列選項參數是一樣的： <pre>     -o page-top=...          # 例：\"72\"  "
+#~ "<br>      -o page-bottom=...     # 例：\"24\"  <br>     -o page-"
+#~ "left=...     # 例：\"36\"  <br>     -o page-right=...     # 例：\"12\"  "
+#~ "<br></pre></p></qt>"
+
+#, fuzzy
+#~ msgid ""
+#~ " <qt><b>Current Page:</b> Select <em>\"Current\"</em> if you want  to "
+#~ "print the page currently visible in your TDE application.</p> <p><b>Note:"
+#~ "</b> this field is disabled if you print from non-TDE applications like "
+#~ "Mozilla or OpenOffice.org, since here TDEPrint has no means to determine "
+#~ "which document page you are currently viewing.</p></qt>"
+#~ msgstr ""
+#~ "<qt><b>目前的頁面：</b>選擇「目前」則只印出目前您應用程式上觀看的那一頁。"
+#~ "</p> <p><b>注意：</b>如果您不是從 TDE 應用程式中列印，則這一欄會被關閉，因"
+#~ "為 TDEPrint 無法決定您目前在觀看文件的第幾頁。</p></qt>"
+
+#, fuzzy
 #~ msgid "Orientation"
 #~ msgstr "方向(&O)"
 
diff --git a/tde-i18n-zh_TW/messages/tdenetwork/kopete.po b/tde-i18n-zh_TW/messages/tdenetwork/kopete.po
index 7160c157709..361a9bea29d 100644
--- a/tde-i18n-zh_TW/messages/tdenetwork/kopete.po
+++ b/tde-i18n-zh_TW/messages/tdenetwork/kopete.po
@@ -14819,8 +14819,8 @@ msgstr "請輸入相片中顯示的角色："
 #~ "Visit the Kopete website at <a href=\"http://trinitydesktop.org\">http://"
 #~ "trinitydesktop.org</a>"
 #~ msgstr ""
-#~ "請參考 Kopete 網站 <a href=\"http://trinitydesktop.org\">http://kopete.kde."
-#~ "org</a>"
+#~ "請參考 Kopete 網站 <a href=\"http://trinitydesktop.org\">http://kopete."
+#~ "kde.org</a>"
 
 #~ msgid "Join Chat..."
 #~ msgstr "加入聊天..."
diff --git a/tde-i18n-zh_TW/messages/tdepim/akregator.po b/tde-i18n-zh_TW/messages/tdepim/akregator.po
index 3efd5c02413..5c675b0b71e 100644
--- a/tde-i18n-zh_TW/messages/tdepim/akregator.po
+++ b/tde-i18n-zh_TW/messages/tdepim/akregator.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: akregator\n"
-"POT-Creation-Date: 2019-07-18 01:58+0200\n"
+"POT-Creation-Date: 2019-07-18 00:26+0200\n"
 "PO-Revision-Date: 2006-12-18 13:09+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -1748,33 +1748,6 @@ msgid "Icon:"
 msgstr "圖示："
 
 #, fuzzy
-#~ msgid ""
-#~ "_: %1: Akregator version; %2: help:// URL; %3: homepage URL; --- end of "
-#~ "comment ---\n"
-#~ "<h2 style='margin-top: 0px;'>Welcome to Akregator %1</h2><p>Akregator is "
-#~ "an RSS feed aggregator for the Trinity Desktop Environment. Feed "
-#~ "aggregators provide a convenient way to browse different kinds of "
-#~ "content, including news, blogs, and other content from online sites. "
-#~ "Instead of checking all your favorite web sites manually for updates, "
-#~ "Akregator collects the content for you.</p><p>For more information about "
-#~ "using Akregator, check the <a href=\"%3\">Akregator website</a>. If you "
-#~ "do not want to see this page anymore, <a href=\"config:/"
-#~ "disable_introduction\">click here</a>.</p><p>We hope that you will enjoy "
-#~ "Akregator.</p>\n"
-#~ "<p>Thank you,</p>\n"
-#~ "<p style='margin-bottom: 0px'>&nbsp; &nbsp; The Akregator Team</p>\n"
-#~ msgstr ""
-#~ "<h2 style='margin-top: 0px;'>歡迎來到 Akregator %1</h2> <p>Akregator 是 "
-#~ "TDE 的 RSS feed 集散地。這裡提供一個方便的環境瀏覽不同內容的文章，包括新"
-#~ "聞、部落格、還有其他站台。您不需要自己檢查所有站台的最新內容，Akregator 會"
-#~ "幫您處理。</p> <p>關於使用 Akregator 的詳情，請看 <a href="
-#~ "\"%3\">Akregator 網站</a>。如果您不想再看到這個簡介，請<a href=\"config:/"
-#~ "disable_introduction\">按這裡</a>。</p> <p>我們希望您喜歡 Akregator。</"
-#~ "p>\n"
-#~ "<p>謝謝。</p>\n"
-#~ "<p style='margin-bottom: 0px'>&nbsp; &nbsp; Akregator 開發團隊</p>\n"
-
-#, fuzzy
 #~ msgid "&Delete"
 #~ msgstr "刪除標籤(&D)"
 
@@ -1811,3 +1784,30 @@ msgstr "圖示："
 
 #~ msgid "TDE Look"
 #~ msgstr "TDE Look"
+
+#, fuzzy
+#~ msgid ""
+#~ "_: %1: Akregator version; %2: help:// URL; %3: homepage URL; --- end of "
+#~ "comment ---\n"
+#~ "<h2 style='margin-top: 0px;'>Welcome to Akregator %1</h2><p>Akregator is "
+#~ "an RSS feed aggregator for the Trinity Desktop Environment. Feed "
+#~ "aggregators provide a convenient way to browse different kinds of "
+#~ "content, including news, blogs, and other content from online sites. "
+#~ "Instead of checking all your favorite web sites manually for updates, "
+#~ "Akregator collects the content for you.</p><p>For more information about "
+#~ "using Akregator, check the <a href=\"%3\">Akregator website</a>. If you "
+#~ "do not want to see this page anymore, <a href=\"config:/"
+#~ "disable_introduction\">click here</a>.</p><p>We hope that you will enjoy "
+#~ "Akregator.</p>\n"
+#~ "<p>Thank you,</p>\n"
+#~ "<p style='margin-bottom: 0px'>&nbsp; &nbsp; The Akregator Team</p>\n"
+#~ msgstr ""
+#~ "<h2 style='margin-top: 0px;'>歡迎來到 Akregator %1</h2> <p>Akregator 是 "
+#~ "TDE 的 RSS feed 集散地。這裡提供一個方便的環境瀏覽不同內容的文章，包括新"
+#~ "聞、部落格、還有其他站台。您不需要自己檢查所有站台的最新內容，Akregator 會"
+#~ "幫您處理。</p> <p>關於使用 Akregator 的詳情，請看 <a href="
+#~ "\"%3\">Akregator 網站</a>。如果您不想再看到這個簡介，請<a href=\"config:/"
+#~ "disable_introduction\">按這裡</a>。</p> <p>我們希望您喜歡 Akregator。</"
+#~ "p>\n"
+#~ "<p>謝謝。</p>\n"
+#~ "<p style='margin-bottom: 0px'>&nbsp; &nbsp; Akregator 開發團隊</p>\n"
diff --git a/tde-i18n-zh_TW/messages/tdesdk/umbrello.po b/tde-i18n-zh_TW/messages/tdesdk/umbrello.po
index 38c2e9f3da8..d6a93d7366b 100644
--- a/tde-i18n-zh_TW/messages/tdesdk/umbrello.po
+++ b/tde-i18n-zh_TW/messages/tdesdk/umbrello.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: umbrello\n"
-"POT-Creation-Date: 2019-06-13 00:07+0200\n"
+"POT-Creation-Date: 2019-07-21 21:20+0200\n"
 "PO-Revision-Date: 2006-09-11 13:32+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -1070,7 +1070,7 @@ msgstr "元件"
 msgid "Deployment"
 msgstr "部署"
 
-#: dialogs/diagramprintpage.cpp:111 umldoc.cpp:1918
+#: dialogs/diagramprintpage.cpp:111
 msgid "TDE-UML-Diagram"
 msgstr "TDE-UML-Diagram"
 
@@ -2813,6 +2813,11 @@ msgstr "正在載入 UML 元素...."
 msgid "Loading diagrams..."
 msgstr "正在載入圖表..."
 
+#: umldoc.cpp:1918
+#, fuzzy
+msgid "kde-uml-Diagram"
+msgstr "刪除圖表"
+
 #: umldoc.cpp:2104
 #, c-format
 msgid "/autosave%1"
diff --git a/tde-i18n-zh_TW/messages/tdevelop/tdevtipofday.po b/tde-i18n-zh_TW/messages/tdevelop/tdevtipofday.po
index cd2cd765bd3..ac20020f3de 100644
--- a/tde-i18n-zh_TW/messages/tdevelop/tdevtipofday.po
+++ b/tde-i18n-zh_TW/messages/tdevelop/tdevtipofday.po
@@ -126,9 +126,10 @@ msgstr "<p>KDevelop 開發團隊希望您有美好的一天。\n"
 #: tips:73
 #, fuzzy
 msgid ""
-"<p>If you have found a bug in TDevelop, please let us know. Use the TDE Gitea Workspace (TGW) "
-"at https://mirror.git.trinitydesktop.org/gitea/ or TDE Bugzilla at http://bugs.trinitydesktop.org/ "
-"or select \"Help\"->\"Report Bug\" from the menu.\n"
+"<p>If you have found a bug in TDevelop, please let us know. Use the TDE "
+"Gitea Workspace (TGW) at https://mirror.git.trinitydesktop.org/gitea/ or TDE "
+"Bugzilla at http://bugs.trinitydesktop.org/ or select \"Help\"->\"Report Bug"
+"\" from the menu.\n"
 msgstr ""
 "<p>假如您在 KDevelop 中發現錯誤，請讓我們知道。您可以使用 TDE Bugzilla "
 "（http://bugs.trinitydesktop.org/）或是選擇「說明」選單中的「報告問題」。\n"