Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: tdeutils/klaptopdaemon
Translate-URL: https://mirror.git.trinitydesktop.org/weblate/projects/tdeutils/klaptopdaemon/

1 files changed, 343 insertions, 317 deletions

diff --git a/tde-i18n-zh_TW/messages/tdeutils/klaptopdaemon.po b/tde-i18n-zh_TW/messages/tdeutils/klaptopdaemon.po
index c2d07a90e36..91e38191fd3 100644
--- a/tde-i18n-zh_TW/messages/tdeutils/klaptopdaemon.po
+++ b/tde-i18n-zh_TW/messages/tdeutils/klaptopdaemon.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: klaptopdaemon\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-25 18:38+0100\n"
 "PO-Revision-Date: 2006-10-16 12:51+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -16,310 +16,17 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.4\n"
 
-#: portable.cpp:945
-msgid ""
-"Your computer seems to have a partial ACPI installation. ACPI was probably "
-"enabled, but some of the sub-options were not - you need to enable at least 'AC "
-"Adaptor' and 'Control Method Battery' and then rebuild your kernel."
-msgstr ""
-"您的電腦中似乎有安裝部份的 ACPI 功能。ACPI 可能已啟動，但是有些選項沒有啟動─您至少必須啟動「AC Adaptor」與「Control Method "
-"Battery」兩個核心選項，然後重編您的核心。"
-
-#: portable.cpp:949
-msgid ""
-"Your computer doesn't have the Linux APM (Advanced Power Management) or ACPI "
-"software installed, or doesn't have the APM kernel drivers installed - check "
-"out the <a href=\"http://www.linuxdoc.org/HOWTO/Laptop-HOWTO.html\">"
-"Linux Laptop-HOWTO</a> document for information on how to install APM."
-msgstr ""
-"您的電腦系統並沒有安裝 Linux APM (進階電源管理) 或 ACPI 的軟體程式，或者是核心並沒有支援或者是安裝 APM 的機制。建議您參考 <a "
-"href=\"http://www.linuxdoc.org/HOWTO/Laptop-HOWTO.html\">Linux Laptop-HOWTO</a> "
-"文件，以便於安裝以及啟動 APM 的功能。"
-
-#: portable.cpp:961
-msgid ""
-"\n"
-"If you make /usr/bin/apm setuid then you will also be able to choose 'suspend' "
-"and 'standby' in the above dialog - check out the help button below to find out "
-"how to do this"
-msgstr ""
-"\n"
-"如果您調整 /usr/bin/apm 檔案的權限，那您就可以在上面對話方塊上選擇使用暫停 (suspend) 以及待命 (standby) "
-"這兩個項目。請參考下方的說明鍵。"
-
-#: portable.cpp:969
+#: _translatorinfo:1
 msgid ""
-"\n"
-"You may need to enable ACPI suspend/resume in the ACPI panel"
-msgstr ""
-"\n"
-"您可能需要在 ACPI 面板中開啟 ACPI 暫停/恢復功能。"
-
-#: portable.cpp:973
-msgid ""
-"\n"
-"Your system does not support suspend/standby"
-msgstr ""
-"\n"
-"您的系統不支援暫停/待命功能。"
-
-#: portable.cpp:1049 portable.cpp:2189 portable.cpp:2595 portable.cpp:2890
-msgid "No PCMCIA controller detected"
-msgstr "偵測不到 PCMCIA 控制器"
-
-#: portable.cpp:1053
-msgid "Card 0:"
-msgstr "Card 0:"
-
-#: portable.cpp:1055
-msgid "Card 1:"
-msgstr "Card 1:"
-
-#: portable.cpp:1170
-msgid ""
-"Your system has APM installed but may not be able to use all of its features "
-"without further setup - look in the 'APM Config' tab for information about "
-"setting up APM for suspend and resume"
-msgstr "您的系統有安裝 APM，但是在進一步設定之前，沒辦法使用全部的功能。請參考「APM 設定」頁來設定 APM 的暫停與回復功能。"
-
-#: portable.cpp:1176
-msgid ""
-"Your system has ACPI installed but may not be able to use all of its features "
-"without further setup - look in the 'ACPI Config' tab for information about "
-"setting up ACPI for suspend and resume"
-msgstr "您的系統有安裝 ACPI，但是在進一步設定之前，沒辦法使用全部的功能。請參考「ACPI 設定」頁來設定 APM 的暫停與回復功能。"
-
-#: portable.cpp:1333
-msgid "%1 MHz (%2)"
-msgstr "%1 MHz (%2)"
-
-#: portable.cpp:1709
-msgid "%1 MHz"
-msgstr "%1 MHz"
-
-#: portable.cpp:2151
-msgid ""
-"There is no /dev/apm file on this system. Please review the FreeBSD handbook on "
-"how to create a device node for the APM device driver (man 4 apm)."
-msgstr "系統上找不到 /dev/apm 檔。請參考 FreeBSD 手冊及 man 4 apm，來產生 APM 驅動程式所使用的裝置檔。"
-
-#: portable.cpp:2154
-msgid ""
-"Your system has the proper device node for APM support, however you cannot "
-"access it. If you are logged in as root right now, you have a problem, "
-"otherwise contact your local sysadmin and ask for read/write access to "
-"/dev/apm."
-msgstr ""
-"您的系統有 APM 的裝置檔，但是您無法存取。如果您已經使用 root 身份登入，那麼可能有別的問題。否則請您與系統管理者聯絡，詢問關於存取 /dev/apm "
-"檔的問題。"
-
-#: portable.cpp:2157 portable.cpp:2562
-msgid "Your kernel lacks support for Advanced Power Management."
-msgstr "您的核心不支援 APM(進階電源管理)。"
-
-#: portable.cpp:2161 portable.cpp:2566
-msgid "There was a generic error while opening /dev/apm."
-msgstr "開啟 /dev/apm 時發生錯誤。"
-
-#: portable.cpp:2166 portable.cpp:2571
-msgid "APM has most likely been disabled."
-msgstr "APM 可能已被關閉。"
-
-#: portable.cpp:2556
-msgid ""
-"There is no /dev/apm file on this system. Please review the NetBSD "
-"documentation on how to create a device node for the APM device driver (man 4 "
-"apm)."
-msgstr "系統上找不到 /dev/apm 檔。請參考 NetBSD 手冊及 man 4 apm，來產生 APM 驅動程式所使用的裝置檔。"
-
-#: portable.cpp:2559
-msgid ""
-"Your system has the proper device node for APM support, however you cannot "
-"access it. If you have APM compiled into the kernel this should not happen."
-msgstr "您的系統有 APM 的裝置檔，但是您無法存取。如果您的核心中已將 APM 支援編入，那麼不應該有這個問題。"
-
-#: portable.cpp:2866
-msgid ""
-"Your computer or operating system is not supported by the current version of "
-"the\n"
-"TDE laptop control panels. If you want help porting these panels to work with "
-"it\n"
-"please contact paul@taniwha.com."
-msgstr ""
-"這個版本的 TDE laptop 控制程式不支援您目前的電腦或者是作業系統。\n"
-"若是您願意提供任何協助的話，請聯絡 paul@taniwha.com 。"
-
-#: laptop_check.cpp:32
-msgid "TDE laptop daemon starter"
-msgstr "TDE Laptop Daemon 啟動程式"
-
-#: laptop_check.cpp:41
-msgid "KLaptop"
-msgstr "KLaptop"
-
-#: laptop_daemon.cpp:539 laptop_daemon.cpp:545 laptop_daemon.cpp:553
-#: laptop_daemon.cpp:558
-msgid "Battery power is running out."
-msgstr "電池電力即將用完"
-
-#: laptop_daemon.cpp:540 laptop_daemon.cpp:546
-msgid "%1 % charge left."
-msgstr "剩下 %1 %。"
-
-#: laptop_daemon.cpp:554
-#, c-format
-msgid ""
-"_n: 1 minute left.\n"
-"%n minutes left."
-msgstr "剩下 %n 分鐘。"
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "鄭孟承，Frank Weng (a.k.a. Franklin)"
 
-#: laptop_daemon.cpp:559
-#, c-format
+#: _translatorinfo:2
 msgid ""
-"_n: 1% left.\n"
-"%n percent left."
-msgstr "剩下 %n %。"
-
-#: laptop_daemon.cpp:691
-msgid "Your battery is now fully charged."
-msgstr "您的電池已充飽。"
-
-#: laptop_daemon.cpp:691
-msgid "Laptop Battery"
-msgstr "筆記型電腦電池"
-
-#: laptop_daemon.cpp:825
-msgid "Logout failed."
-msgstr "登出失敗。"
-
-#: laptop_daemon.cpp:832
-msgid "Shutdown failed."
-msgstr "關機失敗。"
-
-#: kpcmcia.cpp:96 kpcmcia.cpp:163
-msgid "Empty slot."
-msgstr "空的插槽"
-
-#: kpcmciainfo.cpp:56
-msgid "PCMCIA & CardBus Slots"
-msgstr "PCMCIA 與介面卡插槽"
-
-#: kpcmciainfo.cpp:66 kpcmciainfo.cpp:95
-msgid "Ready."
-msgstr "已就緒。"
-
-#: kpcmciainfo.cpp:134
-#, c-format
-msgid "Card Slot %1"
-msgstr "介面卡插槽 %1"
-
-#: kpcmciainfo.cpp:179 kpcmciainfo.cpp:290
-msgid "&Eject"
-msgstr "退出 [&E]"
-
-#: kpcmciainfo.cpp:180 kpcmciainfo.cpp:293
-msgid "&Suspend"
-msgstr "暫停 [&S]"
-
-#: kpcmciainfo.cpp:181
-msgid "&Reset"
-msgstr "重設 [&R]"
-
-#: kpcmciainfo.cpp:201
-msgid "Resetting card..."
-msgstr "重設介面卡..."
-
-#: kpcmciainfo.cpp:208
-msgid "Inserting new card..."
-msgstr "插入新的介面卡..."
-
-#: kpcmciainfo.cpp:212
-msgid "Ejecting card..."
-msgstr "取出介面卡..."
-
-#: kpcmciainfo.cpp:223
-msgid "Suspending card..."
-msgstr "暫停介面卡..."
-
-#: kpcmciainfo.cpp:226
-msgid "Resuming card..."
-msgstr "恢復介面卡..."
-
-#: kpcmciainfo.cpp:237
-msgid "Card type: %1 "
-msgstr "介面卡型式: %1 "
-
-#: kpcmciainfo.cpp:240
-#, c-format
-msgid "Driver: %1"
-msgstr "驅動程式: %1"
-
-#: kpcmciainfo.cpp:243
-msgid "IRQ: %1%2"
-msgstr "IRQ: %1%2"
-
-#: kpcmciainfo.cpp:247
-msgid " (used for memory)"
-msgstr " (用於記憶體)"
-
-#: kpcmciainfo.cpp:250
-msgid " (used for memory and I/O)"
-msgstr " (用於記憶體與 I/O)"
-
-#: kpcmciainfo.cpp:253
-msgid " (used for CardBus)"
-msgstr " (用於 CardBus)"
-
-#: kpcmciainfo.cpp:259 kpcmciainfo.cpp:264
-msgid "none"
-msgstr "無"
-
-#: kpcmciainfo.cpp:262
-#, c-format
-msgid "I/O port(s): %1"
-msgstr "I/O 埠: %1"
-
-#: kpcmciainfo.cpp:267
-msgid "Bus: %1 bit %2"
-msgstr "匯流排: %1 bit %2"
-
-#: kpcmciainfo.cpp:269
-msgid "Bus: unknown"
-msgstr "匯流排: 未知"
-
-#: kpcmciainfo.cpp:270
-msgid "PC Card"
-msgstr "PC 介面卡"
-
-#: kpcmciainfo.cpp:270
-msgid "Cardbus"
-msgstr "介面卡匯流排"
-
-#: kpcmciainfo.cpp:272
-#, c-format
-msgid "Device: %1"
-msgstr "裝置: %1"
-
-#: kpcmciainfo.cpp:275
-msgid "Power: +%1V"
-msgstr "能源: +%1V"
-
-#: kpcmciainfo.cpp:278
-msgid "Programming power: +%1V, +%2V"
-msgstr "編程電源: +%1V, +%2V"
-
-#: kpcmciainfo.cpp:281
-#, c-format
-msgid "Configuration base: 0x%1"
-msgstr "設定基準: 0x%1"
-
-#: kpcmciainfo.cpp:283
-msgid "Configuration base: none"
-msgstr "設定基準: 無"
-
-#: kpcmciainfo.cpp:295
-msgid "Resu&me"
-msgstr "繼續 (&m)"
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "letoh@ms12.url.com.tw, franklin at goodhorse dot idv dot tw"
 
 #: daemondock.cpp:54
 msgid "KLaptop Daemon"
@@ -360,9 +67,11 @@ msgstr "隱藏監控(&H)"
 #: daemondock.cpp:239
 msgid ""
 "You will need to supply a root password to allow KLaptopDaemon to restart "
-"itself as the superuser. It may take up to a minute for the new daemon to start "
-"up and the old one to close."
-msgstr "您需要 root 密碼以便讓 KLaptopDaemon 重新啟動。這可能需要一些時間，以便將舊的關閉並重新啟動。"
+"itself as the superuser. It may take up to a minute for the new daemon to "
+"start up and the old one to close."
+msgstr ""
+"您需要 root 密碼以便讓 KLaptopDaemon 重新啟動。這可能需要一些時間，以便將舊的"
+"關閉並重新啟動。"
 
 #: daemondock.cpp:244 daemondock.cpp:261 daemondock.cpp:265
 msgid "KLaptopDaemon"
@@ -370,8 +79,8 @@ msgstr "KLaptopDaemon"
 
 #: daemondock.cpp:260
 msgid ""
-"PCMCIA cannot be enabled since tdesu cannot be found. Please make sure that it "
-"is installed correctly."
+"PCMCIA cannot be enabled since tdesu cannot be found. Please make sure that "
+"it is installed correctly."
 msgstr "PCMCIA 無法啟動，因為找不到 tdesu 程式。請確定您的 TDE 有正確安裝。"
 
 #: daemondock.cpp:264
@@ -380,8 +89,8 @@ msgstr "PCMCIA 無法啟動。"
 
 #: daemondock.cpp:271
 msgid ""
-"Are you sure you want to hide the battery monitor? Your battery will still be "
-"monitored in the background."
+"Are you sure you want to hide the battery monitor? Your battery will still "
+"be monitored in the background."
 msgstr "您確定您要隱藏電池監控畫面？您的電池會在幕後持續監控。"
 
 #: daemondock.cpp:271
@@ -466,6 +175,10 @@ msgstr "恢復"
 msgid "Reset"
 msgstr "重設"
 
+#: daemondock.cpp:445
+msgid "Insert"
+msgstr ""
+
 #: daemondock.cpp:448
 msgid "Actions"
 msgstr "動作"
@@ -522,17 +235,330 @@ msgstr "使用電池 - 還剩 %1%"
 msgid "No power source found"
 msgstr "沒有電源"
 
-#: _translatorinfo.cpp:1
+#: kpcmcia.cpp:96 kpcmcia.cpp:163
+msgid "Empty slot."
+msgstr "空的插槽"
+
+#: kpcmciainfo.cpp:56
+msgid "PCMCIA & CardBus Slots"
+msgstr "PCMCIA 與介面卡插槽"
+
+#: kpcmciainfo.cpp:66 kpcmciainfo.cpp:95
+msgid "Ready."
+msgstr "已就緒。"
+
+#: kpcmciainfo.cpp:71
+msgid "&Update"
+msgstr ""
+
+#: kpcmciainfo.cpp:134
+#, c-format
+msgid "Card Slot %1"
+msgstr "介面卡插槽 %1"
+
+#: kpcmciainfo.cpp:179 kpcmciainfo.cpp:290
+msgid "&Eject"
+msgstr "退出 [&E]"
+
+#: kpcmciainfo.cpp:180 kpcmciainfo.cpp:293
+msgid "&Suspend"
+msgstr "暫停 [&S]"
+
+#: kpcmciainfo.cpp:181
+msgid "&Reset"
+msgstr "重設 [&R]"
+
+#: kpcmciainfo.cpp:201
+msgid "Resetting card..."
+msgstr "重設介面卡..."
+
+#: kpcmciainfo.cpp:208
+msgid "Inserting new card..."
+msgstr "插入新的介面卡..."
+
+#: kpcmciainfo.cpp:212
+msgid "Ejecting card..."
+msgstr "取出介面卡..."
+
+#: kpcmciainfo.cpp:223
+msgid "Suspending card..."
+msgstr "暫停介面卡..."
+
+#: kpcmciainfo.cpp:226
+msgid "Resuming card..."
+msgstr "恢復介面卡..."
+
+#: kpcmciainfo.cpp:237
+msgid "Card type: %1 "
+msgstr "介面卡型式: %1 "
+
+#: kpcmciainfo.cpp:240
+#, c-format
+msgid "Driver: %1"
+msgstr "驅動程式: %1"
+
+#: kpcmciainfo.cpp:243
+msgid "IRQ: %1%2"
+msgstr "IRQ: %1%2"
+
+#: kpcmciainfo.cpp:247
+msgid " (used for memory)"
+msgstr " (用於記憶體)"
+
+#: kpcmciainfo.cpp:250
+msgid " (used for memory and I/O)"
+msgstr " (用於記憶體與 I/O)"
+
+#: kpcmciainfo.cpp:253
+msgid " (used for CardBus)"
+msgstr " (用於 CardBus)"
+
+#: kpcmciainfo.cpp:259 kpcmciainfo.cpp:264
+msgid "none"
+msgstr "無"
+
+#: kpcmciainfo.cpp:262
+#, c-format
+msgid "I/O port(s): %1"
+msgstr "I/O 埠: %1"
+
+#: kpcmciainfo.cpp:267
+msgid "Bus: %1 bit %2"
+msgstr "匯流排: %1 bit %2"
+
+#: kpcmciainfo.cpp:269
+msgid "Bus: unknown"
+msgstr "匯流排: 未知"
+
+#: kpcmciainfo.cpp:270
+msgid "PC Card"
+msgstr "PC 介面卡"
+
+#: kpcmciainfo.cpp:270
+msgid "Cardbus"
+msgstr "介面卡匯流排"
+
+#: kpcmciainfo.cpp:272
+#, c-format
+msgid "Device: %1"
+msgstr "裝置: %1"
+
+#: kpcmciainfo.cpp:275
+msgid "Power: +%1V"
+msgstr "能源: +%1V"
+
+#: kpcmciainfo.cpp:278
+msgid "Programming power: +%1V, +%2V"
+msgstr "編程電源: +%1V, +%2V"
+
+#: kpcmciainfo.cpp:281
+#, c-format
+msgid "Configuration base: 0x%1"
+msgstr "設定基準: 0x%1"
+
+#: kpcmciainfo.cpp:283
+msgid "Configuration base: none"
+msgstr "設定基準: 無"
+
+#: kpcmciainfo.cpp:288
+msgid "&Insert"
+msgstr ""
+
+#: kpcmciainfo.cpp:295
+msgid "Resu&me"
+msgstr "繼續 (&m)"
+
+#: laptop_check.cpp:32
+msgid "TDE laptop daemon starter"
+msgstr "TDE Laptop Daemon 啟動程式"
+
+#: laptop_check.cpp:41
+msgid "KLaptop"
+msgstr "KLaptop"
+
+#: laptop_daemon.cpp:539 laptop_daemon.cpp:545 laptop_daemon.cpp:553
+#: laptop_daemon.cpp:558
+msgid "Battery power is running out."
+msgstr "電池電力即將用完"
+
+#: laptop_daemon.cpp:540 laptop_daemon.cpp:546
+msgid "%1 % charge left."
+msgstr "剩下 %1 %。"
+
+#: laptop_daemon.cpp:554
+#, c-format
 msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "鄭孟承，Frank Weng (a.k.a. Franklin)"
+"_n: 1 minute left.\n"
+"%n minutes left."
+msgstr "剩下 %n 分鐘。"
 
-#: _translatorinfo.cpp:3
+#: laptop_daemon.cpp:559
+#, c-format
 msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "letoh@ms12.url.com.tw, franklin at goodhorse dot idv dot tw"
+"_n: 1% left.\n"
+"%n percent left."
+msgstr "剩下 %n %。"
+
+#: laptop_daemon.cpp:691
+msgid "Your battery is now fully charged."
+msgstr "您的電池已充飽。"
+
+#: laptop_daemon.cpp:691
+msgid "Laptop Battery"
+msgstr "筆記型電腦電池"
+
+#: laptop_daemon.cpp:825
+msgid "Logout failed."
+msgstr "登出失敗。"
+
+#: laptop_daemon.cpp:832
+msgid "Shutdown failed."
+msgstr "關機失敗。"
+
+#: portable.cpp:945
+msgid ""
+"Your computer seems to have a partial ACPI installation. ACPI was probably "
+"enabled, but some of the sub-options were not - you need to enable at least "
+"'AC Adaptor' and 'Control Method Battery' and then rebuild your kernel."
+msgstr ""
+"您的電腦中似乎有安裝部份的 ACPI 功能。ACPI 可能已啟動，但是有些選項沒有啟動─"
+"您至少必須啟動「AC Adaptor」與「Control Method Battery」兩個核心選項，然後重"
+"編您的核心。"
+
+#: portable.cpp:949
+msgid ""
+"Your computer doesn't have the Linux APM (Advanced Power Management) or ACPI "
+"software installed, or doesn't have the APM kernel drivers installed - check "
+"out the <a href=\"http://www.linuxdoc.org/HOWTO/Laptop-HOWTO.html\">Linux "
+"Laptop-HOWTO</a> document for information on how to install APM."
+msgstr ""
+"您的電腦系統並沒有安裝 Linux APM (進階電源管理) 或 ACPI 的軟體程式，或者是核"
+"心並沒有支援或者是安裝 APM 的機制。建議您參考 <a href=\"http://www.linuxdoc."
+"org/HOWTO/Laptop-HOWTO.html\">Linux Laptop-HOWTO</a> 文件，以便於安裝以及啟"
+"動 APM 的功能。"
+
+#: portable.cpp:961
+msgid ""
+"\n"
+"If you make /usr/bin/apm setuid then you will also be able to choose "
+"'suspend' and 'standby' in the above dialog - check out the help button "
+"below to find out how to do this"
+msgstr ""
+"\n"
+"如果您調整 /usr/bin/apm 檔案的權限，那您就可以在上面對話方塊上選擇使用暫停 "
+"(suspend) 以及待命 (standby) 這兩個項目。請參考下方的說明鍵。"
+
+#: portable.cpp:969
+msgid ""
+"\n"
+"You may need to enable ACPI suspend/resume in the ACPI panel"
+msgstr ""
+"\n"
+"您可能需要在 ACPI 面板中開啟 ACPI 暫停/恢復功能。"
+
+#: portable.cpp:973
+msgid ""
+"\n"
+"Your system does not support suspend/standby"
+msgstr ""
+"\n"
+"您的系統不支援暫停/待命功能。"
+
+#: portable.cpp:1049 portable.cpp:2189 portable.cpp:2595 portable.cpp:2890
+msgid "No PCMCIA controller detected"
+msgstr "偵測不到 PCMCIA 控制器"
+
+#: portable.cpp:1053
+msgid "Card 0:"
+msgstr "Card 0:"
+
+#: portable.cpp:1055
+msgid "Card 1:"
+msgstr "Card 1:"
+
+#: portable.cpp:1170
+msgid ""
+"Your system has APM installed but may not be able to use all of its features "
+"without further setup - look in the 'APM Config' tab for information about "
+"setting up APM for suspend and resume"
+msgstr ""
+"您的系統有安裝 APM，但是在進一步設定之前，沒辦法使用全部的功能。請參考「APM "
+"設定」頁來設定 APM 的暫停與回復功能。"
+
+#: portable.cpp:1176
+msgid ""
+"Your system has ACPI installed but may not be able to use all of its "
+"features without further setup - look in the 'ACPI Config' tab for "
+"information about setting up ACPI for suspend and resume"
+msgstr ""
+"您的系統有安裝 ACPI，但是在進一步設定之前，沒辦法使用全部的功能。請參考"
+"「ACPI 設定」頁來設定 APM 的暫停與回復功能。"
+
+#: portable.cpp:1333
+msgid "%1 MHz (%2)"
+msgstr "%1 MHz (%2)"
+
+#: portable.cpp:1709
+msgid "%1 MHz"
+msgstr "%1 MHz"
+
+#: portable.cpp:2151
+msgid ""
+"There is no /dev/apm file on this system. Please review the FreeBSD handbook "
+"on how to create a device node for the APM device driver (man 4 apm)."
+msgstr ""
+"系統上找不到 /dev/apm 檔。請參考 FreeBSD 手冊及 man 4 apm，來產生 APM 驅動程"
+"式所使用的裝置檔。"
+
+#: portable.cpp:2154
+msgid ""
+"Your system has the proper device node for APM support, however you cannot "
+"access it. If you are logged in as root right now, you have a problem, "
+"otherwise contact your local sysadmin and ask for read/write access to /dev/"
+"apm."
+msgstr ""
+"您的系統有 APM 的裝置檔，但是您無法存取。如果您已經使用 root 身份登入，那麼可"
+"能有別的問題。否則請您與系統管理者聯絡，詢問關於存取 /dev/apm 檔的問題。"
+
+#: portable.cpp:2157 portable.cpp:2562
+msgid "Your kernel lacks support for Advanced Power Management."
+msgstr "您的核心不支援 APM(進階電源管理)。"
+
+#: portable.cpp:2161 portable.cpp:2566
+msgid "There was a generic error while opening /dev/apm."
+msgstr "開啟 /dev/apm 時發生錯誤。"
+
+#: portable.cpp:2166 portable.cpp:2571
+msgid "APM has most likely been disabled."
+msgstr "APM 可能已被關閉。"
+
+#: portable.cpp:2556
+msgid ""
+"There is no /dev/apm file on this system. Please review the NetBSD "
+"documentation on how to create a device node for the APM device driver (man "
+"4 apm)."
+msgstr ""
+"系統上找不到 /dev/apm 檔。請參考 NetBSD 手冊及 man 4 apm，來產生 APM 驅動程式"
+"所使用的裝置檔。"
+
+#: portable.cpp:2559
+msgid ""
+"Your system has the proper device node for APM support, however you cannot "
+"access it. If you have APM compiled into the kernel this should not happen."
+msgstr ""
+"您的系統有 APM 的裝置檔，但是您無法存取。如果您的核心中已將 APM 支援編入，那"
+"麼不應該有這個問題。"
+
+#: portable.cpp:2866
+msgid ""
+"Your computer or operating system is not supported by the current version of "
+"the\n"
+"TDE laptop control panels. If you want help porting these panels to work "
+"with it\n"
+"please contact paul@taniwha.com."
+msgstr ""
+"這個版本的 TDE laptop 控制程式不支援您目前的電腦或者是作業系統。\n"
+"若是您願意提供任何協助的話，請聯絡 paul@taniwha.com 。"
 
 #~ msgid "&Lock && Suspend..."
 #~ msgstr "鎖住 && 暫停 (&L)"