diff options
Diffstat (limited to 'tde-i18n-ms/messages/kdelibs/cupsdconf.po')
| -rw-r--r-- | tde-i18n-ms/messages/kdelibs/cupsdconf.po | 2148 |
1 files changed, 2148 insertions, 0 deletions
diff --git a/tde-i18n-ms/messages/kdelibs/cupsdconf.po b/tde-i18n-ms/messages/kdelibs/cupsdconf.po new file mode 100644 index 00000000000..7bc6827d518 --- /dev/null +++ b/tde-i18n-ms/messages/kdelibs/cupsdconf.po @@ -0,0 +1,2148 @@ +# translation of cupsdconf.po to Malay +# Kelam kabut buat Final Year Project!!! +# cupsdconf.po to Malay. +# Copyright (C) +# Muhammad Najmi Ahmad Zabidi <md_najmi@yahoo.com>,2003 . +# Mahrazi Mohd Kamal <mahrazi@gmail.com>, 2004. +# +msgid "" +msgstr "" +"Project-Id-Version: cupsdconf\n" +"POT-Creation-Date: 2005-05-18 21:23+0200\n" +"PO-Revision-Date: 2007-07-15 13:45+0800\n" +"Last-Translator: Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>\n" +"Language-Team: Malay <kedidiemas@yahoogroups.com>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.3.1\n" + +#: addressdialog.cpp:30 +msgid "ACL Address" +msgstr "Alamat ACL" + +#: addressdialog.cpp:36 browsedialog.cpp:42 +msgid "Allow" +msgstr "Benarkan" + +#: addressdialog.cpp:37 browsedialog.cpp:43 +msgid "Deny" +msgstr "Halang" + +#: addressdialog.cpp:39 browsedialog.cpp:47 +msgid "Type:" +msgstr "Jenis:" + +#: addressdialog.cpp:40 portdialog.cpp:43 +msgid "Address:" +msgstr "Alamat:" + +#: browsedialog.cpp:41 +msgid "Send" +msgstr "Kirim" + +#: browsedialog.cpp:44 +msgid "Relay" +msgstr "Geganti" + +#: browsedialog.cpp:45 +msgid "Poll" +msgstr "Undi" + +#: browsedialog.cpp:48 +msgid "From:" +msgstr "Dari:" + +#: browsedialog.cpp:49 +msgid "To:" +msgstr "Ke:" + +#: browsedialog.cpp:62 +msgid "Browse Address" +msgstr "Alamat Lungsur" + +#: cupsd.conf.template.cpp:1 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Server name (ServerName)</b>\n" +"<p>\n" +"The hostname of your server, as advertised to the world.\n" +"By default CUPS will use the hostname of the system.</p>\n" +"<p>\n" +"To set the default server used by clients, see the client.conf file.</p>\n" +"<p>\n" +"<i>ex</i>: myhost.domain.com</p>\n" +msgstr "" +"<b>Nama pelayan (ServerName)</b>\n" +"<p>\n" +"Namahos pelayan anda, seperti diiklankan kepada dunia.\n" +"Secara default CUPS akan menggunakan namahos sistem ini.</p>\n" +"<p>\n" +"Untuk menetapkan pelayan default yang digunakan oleh klien, lihat fail " +"client.conf</p>\n" +"<p>\n" +"<i>contoh</i>: myhost.domain.com</p>\n" + +#: cupsd.conf.template.cpp:11 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Server administrator (ServerAdmin)</b>\n" +"<p>\n" +"The email address to send all complaints or problems to.\n" +"By default CUPS will use \"root@hostname\".</p>\n" +"<p>\n" +"<i>ex</i>: root@myhost.com</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Pelayan</b>\n" +"<p> kepada semua atau kepada defaultroot@hostname</p>\n" +"<p>\n" +"<i></i>root@myhost.com</p> t" + +#: cupsd.conf.template.cpp:19 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Access log (AccessLog)</b>\n" +"<p>\n" +"The access log file; if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/access_log\".</p>\n" +"<p>\n" +"You can also use the special name <b>syslog</b> to send the output to the\n" +"syslog file or daemon.</p>\n" +"<p>\n" +"<i>ex</i>: /var/log/cups/access_log</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> log</b>\n" +"<p> akses log bukan mula dengan adalah kepada kepada default kepada t log akses " +"log</p>\n" +"<p> unama<b></b> kepada kepada atau</p>\n" +"<p>\n" +"<i></i> log akses log</p> t" + +#: cupsd.conf.template.cpp:31 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Data directory (DataDir)</b>\n" +"<p>\n" +"The root directory for the CUPS data files.\n" +"By default /usr/share/cups.</p>\n" +"<p>\n" +"<i>ex</i>: /usr/share/cups</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Data</b>\n" +"<p> for fail-fail default</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:39 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Default character set (DefaultCharset)</b>\n" +"<p>\n" +"The default character set to use. If not specified,\n" +"defaults to utf-8. Note that this can also be overridden in\n" +"HTML documents...</p>\n" +"<p>\n" +"<i>ex</i>: utf-8</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Default</b>\n" +"<p> default kepada Jika bukan kepada Nota in</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:48 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Default language (DefaultLanguage)</b>\n" +"<p>\n" +"The default language if not specified by the browser.\n" +"If not specified, the current locale is used.</p>\n" +"<p>\n" +"<i>ex</i>: en</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Default</b>\n" +"<p> default bukan bukan adalah</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:56 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Document directory (DocumentRoot)</b>\n" +"<p>\n" +"The root directory for HTTP documents that are served.\n" +"By default the compiled-in directory.</p>\n" +"<p>\n" +"<i>ex</i>: /usr/share/cups/doc</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Dokumen</b>\n" +"<p> for HTTP default in</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:64 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Error log (ErrorLog)</b>\n" +"<p>\n" +"The error log file; if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/error_log\".</p>\n" +"<p>\n" +"You can also use the special name <b>syslog</b> to send the output to the\n" +"syslog file or daemon.</p>\n" +"<p>\n" +"<i>ex</i>: /var/log/cups/error_log</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Ralat log</b>\n" +"<p> ralat log bukan mula dengan adalah kepada kepada default kepada t log ralat " +"log</p>\n" +"<p> unama<b></b> kepada kepada atau</p>\n" +"<p>\n" +"<i></i> log ralat log</p> t" + +#: cupsd.conf.template.cpp:76 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Font path (FontPath)</b>\n" +"<p>\n" +"The path to locate all font files (currently only for pstoraster).\n" +"By default /usr/share/cups/fonts.</p>\n" +"<p>\n" +"<i>ex</i>: /usr/share/cups/fonts</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Font</b>\n" +"<p> kepada semua fail-fail for default</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:84 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Log level (LogLevel)</b>\n" +"<p>\n" +"Controls the number of messages logged to the ErrorLog\n" +"file and can be one of the following:</p>\n" +"<ul type=circle>\n" +"<li><i>debug2</i>: Log everything.</li>\n" +"<li><i>debug</i>: Log almost everything.</li>\n" +"<li><i>info</i>: Log all requests and state changes.</li>\n" +"<li><i>warn</i>: Log errors and warnings.</li>\n" +"<li><i>error</i>: Log only errors.</li>\n" +"<li><i>none</i>: Log nothing.</li>\n" +"</ul>" +"<p>\n" +"<i>ex</i>: info</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Log</b>\n" +"<p> nombor dari kepada dan dari</p>\n" +"<ul type=circle>\n" +"<li><i></i> Log</li>\n" +"<li><i></i> Log</li>\n" +"<li><i></i> Log semua dan Keadaan</li>\n" +"<li><i></i> Log dan</li>\n" +"<li><i> ralat</i> Log</li>\n" +"<li><i> tiada</i> Log tiada apa-apa</li>\n" +"</ul>" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:99 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max log size (MaxLogSize)</b>\n" +"<p>\n" +"Controls the maximum size of each log file before they are\n" +"rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.</p>\n" +"<p>\n" +"<i>ex</i>: 1048576</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Max log saiz</b>\n" +"<p> saiz dari log Default kepada tetap kepada kepada log</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:107 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Page log (PageLog)</b>\n" +"<p>\n" +"The page log file; if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/page_log\".</p>\n" +"<p>\n" +"You can also use the special name <b>syslog</b> to send the output to the\n" +"syslog file or daemon.</p>\n" +"<p>\n" +"<i>ex</i>: /var/log/cups/page_log</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Halaman log</b>\n" +"<p> log bukan mula dengan adalah kepada kepada default kepada t log log</p>\n" +"<p> unama<b></b> kepada kepada atau</p>\n" +"<p>\n" +"<i></i> log log</p> t" + +#: cupsd.conf.template.cpp:119 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Preserve job history (PreserveJobHistory)</b>\n" +"<p>\n" +"Whether or not to preserve the job history after a\n" +"job is completed, canceled, or stopped. Default is Yes.</p>\n" +"<p>\n" +"<i>ex</i>: Yes</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> atau bukan kepada adalah selesai atau Default adalah Ya</p>\n" +"<p>\n" +"<i></i> Ya</p> t" + +#: cupsd.conf.template.cpp:127 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Preserve job files (PreserveJobFiles)</b>\n" +"<p>\n" +"Whether or not to preserve the job files after a\n" +"job is completed, canceled, or stopped. Default is No.</p>\n" +"<p>\n" +"<i>ex</i>: No</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> fail-fail</b>\n" +"<p> atau bukan kepada fail-fail adalah selesai atau Default adalah Tidak</p>\n" +"<p>\n" +"<i></i> Tidak</p> t" + +#: cupsd.conf.template.cpp:135 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Printcap file (Printcap)</b>\n" +"<p>\n" +"The name of the printcap file. Default is no filename.\n" +"Leave blank to disable printcap file generation.</p>\n" +"<p>\n" +"<i>ex</i>: /etc/printcap</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> unama dari Default adalah tidak namafail kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:143 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Request directory (RequestRoot)</b>\n" +"<p>\n" +"The directory where request files are stored.\n" +"By default /var/spool/cups.</p>\n" +"<p>\n" +"<i>ex</i>: /var/spool/cups</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> fail-fail default</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:151 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Remote root user (RemoteRoot)</b>\n" +"<p>\n" +"The name of the user assigned to unauthenticated accesses\n" +"from remote systems. By default \"remroot\".</p>\n" +"<p>\n" +"<i>ex</i>: remroot</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Jauh</b>\n" +"<p> unama dari kepada default</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:159 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Server binaries (ServerBin)</b>\n" +"<p>\n" +"The root directory for the scheduler executables.\n" +"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).</p>\n" +"<p>\n" +"<i>ex</i>: /usr/lib/cups</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Pelayan</b>\n" +"<p> for default atau</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:167 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Server files (ServerRoot)</b>\n" +"<p>\n" +"The root directory for the scheduler.\n" +"By default /etc/cups.</p>\n" +"<p>\n" +"<i>ex</i>: /etc/cups</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Pelayan fail-fail</b>\n" +"<p> for default</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:175 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>User (User)</b>\n" +"<p>\n" +"The user the server runs under. Normally this\n" +"must be <b>lp</b>, however you can configure things for another user\n" +"as needed.</p>\n" +"<p>\n" +"Note: the server must be run initially as root to support the\n" +"default IPP port of 631. It changes users whenever an external\n" +"program is run...</p>\n" +"<p>\n" +"<i>ex</i>: lp</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Pengguna Pengguna</b>\n" +"<p><b></b> anda for</p>\n" +"<p> kepada liang dari adalah</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:188 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Group (Group)</b>\n" +"<p>\n" +"The group the server runs under. Normally this\n" +"must be <b>sys</b>, however you can configure things for another\n" +"group as needed.</p>\n" +"<p>\n" +"<i>ex</i>: sys</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Kumpulan Kumpulan</b>\n" +"<p> kumpulan<b></b> anda for</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:197 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>RIP cache (RIPCache)</b>\n" +"<p>\n" +"The amount of memory that each RIP should use to cache\n" +"bitmaps. The value can be any real number followed by \"k\" for\n" +"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n" +"(1 tile = 256x256 pixels). Defaults to \"8m\" (8 megabytes).</p>\n" +"<p>\n" +"<i>ex</i>: 8m</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> dari kepada nilai nombor for m for for atau for t piksel Default kepada</p>" +"\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:207 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Temporary files (TempDir)</b>\n" +"<p>\n" +"The directory to put temporary files in. This directory must be\n" +"writable by the user defined above! Defaults to \"/var/spool/cups/tmp\" or\n" +"the value of the TMPDIR environment variable.</p>\n" +"<p>\n" +"<i>ex</i>: /var/spool/cups/tmp</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> fail-fail</b>\n" +"<p> kepada fail-fail in Default kepada atau nilai dari</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:216 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Filter limit (FilterLimit)</b>\n" +"<p>\n" +"Sets the maximum cost of all job filters that can be run\n" +"at the same time. A limit of 0 means no limit. A typical job may need\n" +"a filter limit of at least 200; limits less than the minimum required\n" +"by a job force a single job to be printed at any time.</p>\n" +"<p>\n" +"The default limit is 0 (unlimited).</p>\n" +"<p>\n" +"<i>ex</i>: 200</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Tapis</b>\n" +"<p> kos dari semua masa dari tidak dari kepada masa</p>\n" +"<p> default adalah tanpa had</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:228 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Listen to (Port/Listen)</b>\n" +"<p>\n" +"Ports/addresses that are listened to. The default port 631 is reserved\n" +"for the Internet Printing Protocol (IPP) and is what is used here.</p>\n" +"<p>\n" +"You can have multiple Port/Listen lines to listen to more than one\n" +"port or address, or to restrict access.</p>\n" +"<p>\n" +"Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n" +"for encryption. If you want to support web-based encryption you will\n" +"probably need to listen on port 443 (the \"HTTPS\" port...).</p>\n" +"<p>\n" +"<i>ex</i>: 631, myhost:80, 1.2.3.4:631</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> kepada Liang</b>\n" +"<p> kepada default liang adalah Internet Cetakan Protokol dan adalah adalah</p>" +"\n" +"<p> Liang baris kepada kepada atau atau kepada akses</p>\n" +"<p> TLS atau HTTP Jika anda kepada anda kepada on liang HTTPS liang</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:243 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Hostname lookups (HostNameLookups)</b>\n" +"<p>\n" +"Whether or not to do lookups on IP addresses to get a\n" +"fully-qualified hostname. This defaults to Off for performance reasons...</p>\n" +"<p>\n" +"<i>ex</i>: On</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Namahos</b>\n" +"<p> atau bukan kepada on IP kepada kepada Off for</p>\n" +"<p>\n" +"<i></i> On</p> t" + +#: cupsd.conf.template.cpp:251 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Keep alive (KeepAlive)</b>\n" +"<p>\n" +"Whether or not to support the Keep-Alive connection\n" +"option. Default is on.</p>\n" +"<p>\n" +"<i>ex</i>: On</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Simpan</b>\n" +"<p> atau bukan kepada Simpan Default adalah on</p>\n" +"<p>\n" +"<i></i> On</p> t" + +#: cupsd.conf.template.cpp:259 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Keep-alive timeout (KeepAliveTimeout)</b>\n" +"<p>\n" +"The timeout (in seconds) before Keep-Alive connections are\n" +"automatically closed. Default is 60 seconds.</p>\n" +"<p>\n" +"<i>ex</i>: 60</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Simpan</b>\n" +"<p> in saat Simpan Default adalah saat</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:267 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max clients (MaxClients)</b>\n" +"<p>\n" +"Controls the maximum number of simultaneous clients that\n" +"will be handled. Defaults to 100.</p>\n" +"<p>\n" +"<i>ex</i>: 100</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Max</b>\n" +"<p> nombor dari Default kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:275 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max request size (MaxRequestSize)</b>\n" +"<p>\n" +"Controls the maximum size of HTTP requests and print files.\n" +"Set to 0 to disable this feature (defaults to 0).</p>\n" +"<p>\n" +"<i>ex</i>: 0</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Max saiz</b>\n" +"<p> saiz dari HTTP dan fail-fail kepada kepada kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:283 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Client timeout (Timeout)</b>\n" +"<p>\n" +"The timeout (in seconds) before requests time out. Default is 300 seconds.</p>" +"\n" +"<p>\n" +"<i>ex</i>: 300</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Klien Had masa</b>\n" +"<p> in saat masa keluar Default adalah saat</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:290 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Use browsing (Browsing)</b>\n" +"<p>\n" +"Whether or not to <b>listen</b> to printer \n" +"information from other CUPS servers. \n" +"</p>\n" +"<p>\n" +"Enabled by default.\n" +"</p>\n" +"<p>\n" +"Note: to enable the <b>sending</b> of browsing\n" +"information from this CUPS server to the LAN,\n" +"specify a valid <i>BrowseAddress</i>.\n" +"</p>\n" +"<p>\n" +"<i>ex</i>: On</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Guna Layar</b>\n" +"<p> atau bukan kepada<b></b> kepada pencetak daripada lain-lain\n" +"</p>\n" +"<p> default\n" +"</p>\n" +"<p> kepada<b></b> dari daripada kepada<i></i>\n" +"</p>\n" +"<p>\n" +"<i></i> On</p> t" + +#: cupsd.conf.template.cpp:307 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Use short names (BrowseShortNames)</b>\n" +"<p>\n" +"Whether or not to use \"short\" names for remote printers\n" +"when possible (e.g. \"printer\" instead of \"printer@host\"). Enabled by\n" +"default.</p>\n" +"<p>\n" +"<i>ex</i>: Yes</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Guna</b>\n" +"<p> atau bukan kepada for e pencetak dariprinter@host Hidupkan</p>\n" +"<p>\n" +"<i></i> Ya</p> t" + +#: cupsd.conf.template.cpp:316 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse addresses (BrowseAddress)</b>\n" +"<p>\n" +"Specifies a broadcast address to be used. By\n" +"default browsing information is broadcast to all active interfaces.</p>\n" +"<p>\n" +"Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n" +"you have a Class A, B, C, or D netmask (i.e. no CIDR support).</p>\n" +"<p>\n" +"<i>ex</i>: x.y.z.255, x.y.255.255</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> kepada adalah kepada semua aktif</p>\n" +"<p> dan bukan Kelas B C atau D e tidak</p>\n" +"<p>\n" +"<i></i> x y x y</p> t" + +#: cupsd.conf.template.cpp:327 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse allow/deny (BrowseAllow/BrowseDeny)</b>\n" +"<p>\n" +"<u>BrowseAllow</u>: specifies an address mask to allow for incoming browser\n" +"packets. The default is to allow packets from all addresses.</p>\n" +"<p>\n" +"<u>BrowseDeny</u>: specifies an address mask to deny for incoming browser\n" +"packets. The default is to deny packets from no addresses.</p>\n" +"<p>\n" +"Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n" +"addresses:</p>\n" +"<pre>\n" +"All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"</pre>" +"<p>\n" +"The hostname/domainname restrictions only work if you have turned hostname\n" +"lookups on!</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p>\n" +"<u></u> kepada for default adalah kepada daripada semua</p>\n" +"<p>\n" +"<u></u> kepada for default adalah kepada daripada tidak</p>\n" +"<p> dan for</p>\n" +"<pre> t t mm\n" +"</pre>" +"<p> anda on</p> t" + +#: cupsd.conf.template.cpp:354 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse interval (BrowseInterval)</b>\n" +"<p>\n" +"The time between browsing updates in seconds. Default\n" +"is 30 seconds.</p>\n" +"<p>\n" +"Note that browsing information is sent whenever a printer's state changes\n" +"as well, so this represents the maximum time between updates.</p>\n" +"<p>\n" +"Set this to 0 to disable outgoing broadcasts so your local printers are\n" +"not advertised but you can still see printers on other hosts.</p>\n" +"<p>\n" +"<i>ex</i>: 30</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> masa in saat Default saat</p>\n" +"<p> adalah pencetak s Keadaan masa</p>\n" +"<p> kepada kepada lokal anda on lain-lain</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:368 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse order (BrowseOrder)</b>\n" +"<p>\n" +"Specifies the order of BrowseAllow/BrowseDeny comparisons.</p>\n" +"<p>\n" +"<i>ex</i>: allow,deny</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> dari</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:375 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse poll (BrowsePoll)</b>\n" +"<p>\n" +"Poll the named server(s) for printers.</p>\n" +"<p>\n" +"<i>ex</i>: myhost:631</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> s for</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:382 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse port (BrowsePort)</b>\n" +"<p>\n" +"The port used for UDP broadcasts. By default this is\n" +"the IPP port; if you change this you need to do it on all servers.\n" +"Only one BrowsePort is recognized.</p>\n" +"<p>\n" +"<i>ex</i>: 631</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur liang</b>\n" +"<p> liang for default adalah liang anda anda kepada on semua adalah</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:391 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse relay (BrowseRelay)</b>\n" +"<p>\n" +"Relay browser packets from one address/network to another.</p>\n" +"<p>\n" +"<i>ex</i>: src-address dest-address</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> daripada kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:398 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse timeout (BrowseTimeout)</b>\n" +"<p>\n" +"The timeout (in seconds) for network printers - if we don't\n" +"get an update within this time the printer will be removed\n" +"from the printer list. This number definitely should not be\n" +"less the BrowseInterval value for obvious reasons. Defaults\n" +"to 300 seconds.</p>\n" +"<p>\n" +"<i>ex</i>: 300</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> in saat for masa pencetak pencetak nombor bukan nilai for Default saat</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:409 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Implicit classes (ImplicitClasses)</b>\n" +"<p>\n" +"Whether or not to use implicit classes.</p>\n" +"<p>\n" +"Printer classes can be specified explicitly in the classes.conf\n" +"file, implicitly based upon the printers available on the LAN, or\n" +"both.</p>\n" +"<p>\n" +"When ImplicitClasses is On, printers on the LAN with the same name\n" +"(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n" +"name. This allows you to setup multiple redundant queues on a LAN\n" +"without a lot of administrative difficulties. If a user sends a\n" +"job to Acme-LaserPrint-1000, the job will go to the first available\n" +"queue.</p>\n" +"<p>\n" +"Enabled by default.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Implisit</b>\n" +"<p> atau bukan kepada</p>\n" +"<p> in on atau</p>\n" +"<p> adalah On on dengan unama t e dengan anda kepada on dari Jika kepada " +"kepada</p>\n" +"<p> default</p> t" + +#: cupsd.conf.template.cpp:427 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>System group (SystemGroup)</b>\n" +"<p>\n" +"The group name for \"System\" (printer administration)\n" +"access. The default varies depending on the operating system, but\n" +"will be <b>sys</b>, <b>system</b>, or <b>root</b> (checked for in that " +"order).</p>\n" +"<p>\n" +"<i>ex</i>: sys</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Sistem kumpulan</b>\n" +"<p> kumpulan unama for Sistem pencetak default on sistem<b></b><b> sistem</b> " +"atau<b></b> for in</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:436 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Encryption certificate (ServerCertificate)</b>\n" +"<p>\n" +"The file to read containing the server's certificate.\n" +"Defaults to \"/etc/cups/ssl/server.crt\".</p>\n" +"<p>\n" +"<i>ex</i>: /etc/cups/ssl/server.crt</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> kepada s kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:444 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Encryption key (ServerKey)</b>\n" +"<p>\n" +"The file to read containing the server's key.\n" +"Defaults to \"/etc/cups/ssl/server.key\".</p>\n" +"<p>\n" +"<i>ex</i>: /etc/cups/ssl/server.key</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> kepada s kepada</p>\n" +"<p>\n" +"<i></i></p> t" + +#: cupsd.conf.template.cpp:452 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"Access permissions\n" +"# Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...\n" +"# AuthType: the authorization to use:\n" +"# None - Perform no authentication\n" +"Basic - Perform authentication using the HTTP Basic method.\n" +"Digest - Perform authentication using the HTTP Digest method.\n" +"# (Note: local certificate authentication can be substituted by\n" +"the client for Basic or Digest when connecting to the\n" +"localhost interface)\n" +"# AuthClass: the authorization class; currently only Anonymous, User,\n" +"System (valid user belonging to group SystemGroup), and Group\n" +"(valid user belonging to the specified group) are supported.\n" +"# AuthGroupName: the group name for \"Group\" authorization.\n" +"# Order: the order of Allow/Deny processing.\n" +"# Allow: allows access from the specified hostname, domain, IP address, or\n" +"network.\n" +"# Deny: denies access from the specified hostname, domain, IP address, or\n" +"network.\n" +"# Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n" +"# All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"# The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.\n" +"# Encryption: whether or not to use encryption; this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.\n" +"# Possible values:\n" +"# Always - Always use encryption (SSL)\n" +"Never - Never use encryption\n" +"Required - Use TLS encryption upgrade\n" +"IfRequested - Use encryption if the server requests it\n" +"# The default value is \"IfRequested\".\n" +msgstr "" +"Buat bukan e keizinan t keizinan for kepada t kepada t Tiada tidak HTTP Asas " +"HTTP t Nota lokal for Asas atau kepada t Anonymous Pengguna kepada kumpulan dan " +"Kumpulan t kepada kumpulan t kumpulan unama for Kumpulan t Susunan dari " +"Benarkan Halang t Benarkan akses daripada IP atau t Halang akses daripada IP " +"atau t Kedua-dua Benarkan dan Halang for t Semua t t mm t dan anda On t atau " +"bukan kepada bergantung on OpenSSL dan t t Sentiasa Sentiasa SSL Tidak sekali " +"Guna TLS Guna t default nilai adalah t" + +#: cupsd.conf.template.cpp:495 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Authentication (AuthType)</b>\n" +"<p>\n" +"The authorization to use:" +"<p>\n" +"<ul type=circle>\n" +"<li><i>None</i> - Perform no authentication.</li>\n" +"<li><i>Basic</i> - Perform authentication using the HTTP Basic method.</li>\n" +"<li><i>Digest</i> - Perform authentication using the HTTP Digest method.</li>\n" +"</ul>" +"<p>\n" +"Note: local certificate authentication can be substituted by\n" +"the client for <i>Basic</i> or <i>Digest</i> when connecting to the\n" +"localhost interface.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Autentikasi</b>\n" +"<p> kepada" +"<p>\n" +"<ul type=circle>\n" +"<li><i> Tiada</i> tidak</li>\n" +"<li><i> Asas</i> HTTP Asas</li>\n" +"<li><i></i> HTTP</li>\n" +"</ul>" +"<p> lokal for<i> Asas</i> atau<i></i> kepada</p> t" + +#: cupsd.conf.template.cpp:508 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Class (AuthClass)</b>\n" +"<p>\n" +"The authorization class; currently only <i>Anonymous</i>, <i>User</i>,\n" +"<i>System</i> (valid user belonging to group SystemGroup), and <i>Group</i>\n" +"(valid user belonging to the specified group) are supported.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Kelas</b>\n" +"<p><i> Anonymous</i><i> Pengguna</i>\n" +"<i> Sistem</i> kepada kumpulan dan<i> Kumpulan</i> t kepada kumpulan</p> t" + +#: cupsd.conf.template.cpp:515 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<p>The user/group names allowed to access the resource. The format is a\n" +"comma separated list.</p>\n" +msgstr "" +"Buat bukan e\n" +"<p> kumpulan kepada akses adalah</p> t" + +#: cupsd.conf.template.cpp:519 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Satisfy (Satisfy)</b>\n" +"<p>\n" +"This directive controls whether all specified conditions must\n" +"be satisfied to allow access to the resource. If set to \"all\",\n" +"then all authentication and access control conditions must be\n" +"satisfied to allow access.\n" +"</p>\n" +"<p>\n" +"Setting Satisfy to \"any\" allows a user to gain access if the\n" +"authentication <i>or</i> access control requirements are satisfied.\n" +"For example, you might require authentication for remote access,\n" +"but allow local access without authentication.\n" +"</p>\n" +"<p>\n" +"The default is \"all\".\n" +"</p> \n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> semua kepada akses kepada Jika kepada semua semua dan akses kepada akses\n" +"</p>\n" +"<p> kepada kepada akses<i> atau</i> akses anda for akses lokal akses\n" +"</p>\n" +"<p> default adalah semua\n" +"</p> t" + +#: cupsd.conf.template.cpp:537 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Authentication group name (AuthGroupName)</b>\n" +"<p>\n" +"The group name for <i>Group</i> authorization.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Autentikasi kumpulan unama</b>\n" +"<p> kumpulan unama for<i> Kumpulan</i></p> t" + +#: cupsd.conf.template.cpp:542 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>ACL order (Order)</b>\n" +"<p>\n" +"The order of Allow/Deny processing.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Susunan</b>\n" +"<p> dari Benarkan Halang</p> t" + +#: cupsd.conf.template.cpp:547 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Allow</b>\n" +"<p>\n" +"Allows access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:</p>\n" +"<pre>\n" +"All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"</pre>" +"<p>\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Benarkan</b>\n" +"<p> akses daripada IP atau</p>\n" +"<pre> t t mm\n" +"</pre>" +"<p> dan anda On</p> t" + +#: cupsd.conf.template.cpp:568 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>ACL addresses (Allow/Deny)</b>\n" +"<p>\n" +"Allows/Denies access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:</p>\n" +"<pre>\n" +"All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"</pre>" +"<p>\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Benarkan Halang</b>\n" +"<p> akses daripada IP atau</p>\n" +"<pre> t t mm\n" +"</pre>" +"<p> dan anda On</p> t" + +#: cupsd.conf.template.cpp:589 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Encryption (Encryption)</b>\n" +"<p>\n" +"Whether or not to use encryption; this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.</p>\n" +"<p>\n" +"Possible values:</p>\n" +"<ul type=circle>\n" +"<li><i>Always</i> - Always use encryption (SSL)</li>\n" +"<li><i>Never</i> - Never use encryption</li>\n" +"<li><i>Required</i> - Use TLS encryption upgrade</li>\n" +"<li><i>IfRequested</i> - Use encryption if the server requests it</li>\n" +"</ul>" +"<p>\n" +"The default value is \"IfRequested\".</p>\n" +msgstr "" +"Buat bukan e\n" +"<b></b>\n" +"<p> atau bukan kepada bergantung on OpenSSL dan</p>\n" +"<p></p>\n" +"<ul type=circle>\n" +"<li><i> Sentiasa</i> Sentiasa SSL</li>\n" +"<li><i> Tidak sekali</i> Tidak sekali</li>\n" +"<li><i> Dikehendaki</i> Guna TLS</li>\n" +"<li><i></i> Guna</li>\n" +"</ul>" +"<p> default nilai adalah</p> t" + +#: cupsd.conf.template.cpp:604 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Access permissions</b>\n" +"<p>\n" +"Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> keizinan</b>\n" +"<p> keizinan for kepada</p> t" + +#: cupsd.conf.template.cpp:610 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Auto purge jobs (AutoPurgeJobs)</b>\n" +"<p>\n" +"Automatically purge jobs when not needed for quotas.\n" +"Default is No.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Auto</b>\n" +"<p> bukan for adalah Tidak</p> t" + +#: cupsd.conf.template.cpp:616 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Browse protocols (BrowseProtocols)</b>\n" +"<p>\n" +"Which protocols to use for browsing. Can be\n" +"any of the following separated by whitespace and/or commas:</p>\n" +"<ul type=circle>\n" +"<li><i>all</i> - Use all supported protocols.</li>\n" +"<li><i>cups</i> - Use the CUPS browse protocol.</li>\n" +"<li><i>slp</i> - Use the SLPv2 protocol.</li>\n" +"</ul>" +"<p>\n" +"The default is <b>cups</b>.</p>\n" +"<p>\n" +"Note: If you choose to use SLPv2, it is <b>strongly</b> recommended that\n" +"you have at least one SLP Directory Agent (DA) on your\n" +"network. Otherwise, browse updates can take several seconds,\n" +"during which the scheduler will not response to client\n" +"requests.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Lungsur</b>\n" +"<p> kepada for dari dan atau</p>\n" +"<ul type=circle>\n" +"<li><i> semua</i> Guna semua</li>\n" +"<li><i></i> Guna</li>\n" +"<li><i></i> Guna</li>\n" +"</ul>" +"<p> default adalah<b></b></p>\n" +"<p> Jika anda kepada adalah<b></b> Direktori on saat bukan kepada</p> t" + +#: cupsd.conf.template.cpp:634 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Classification (Classification)</b>\n" +"<p>\n" +"The classification level of the server. If set, this\n" +"classification is displayed on all pages, and raw printing is disabled.\n" +"The default is the empty string.</p>\n" +"<p>\n" +"<i>ex</i>: confidential\n" +msgstr "" +"Buat bukan e\n" +"<b> Klasifikasi Klasifikasi</b>\n" +"<p> dari Jika adalah on semua laman dan adalah dimatikan default adalah " +"kosong</p>\n" +"<p>\n" +"<i></i> t" + +#: cupsd.conf.template.cpp:643 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Allow overrides (ClassifyOverride)</b>\n" +"<p>\n" +"Whether to allow users to override the classification\n" +"on printouts. If enabled, users can limit banner pages to before or\n" +"after the job, and can change the classification of a job, but cannot\n" +"completely eliminate the classification or banners.</p>\n" +"<p>\n" +"The default is off.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Benarkan</b>\n" +"<p> kepada kepada Jika dibolehkan laman kepada atau dan dari atau</p>\n" +"<p> default adalah off</p> t" + +#: cupsd.conf.template.cpp:653 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Hide implicit members (HideImplicitMembers)</b>\n" +"<p>\n" +"Whether or not to show the members of an\n" +"implicit class.</p>\n" +"<p>\n" +"When HideImplicitMembers is On, any remote printers that are\n" +"part of an implicit class are hidden from the user, who will\n" +"then only see a single queue even though many queues will be\n" +"supporting the implicit class.</p>\n" +"<p>\n" +"Enabled by default.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Sorok</b>\n" +"<p> atau bukan kepada dari</p>\n" +"<p> adalah On dari daripada</p>\n" +"<p> default</p> t" + +#: cupsd.conf.template.cpp:666 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Use "any" classes (ImplicitAnyClasses)</b>\n" +"<p>\n" +"Whether or not to create <b>AnyPrinter</b> implicit\n" +"classes.</p>\n" +"<p>\n" +"When ImplicitAnyClasses is On and a local queue of the same name\n" +"exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n" +"an implicit class called \"Anyprinter\" is created instead.</p>\n" +"<p>\n" +"When ImplicitAnyClasses is Off, implicit classes are not created\n" +"when there is a local queue of the same name.</p>\n" +"<p>\n" +"Disabled by default.</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Guna""</b>\n" +"<p> atau bukan kepada cipta<b></b></p>\n" +"<p> adalah On dan lokal dari unama e pencetakprinter@server1printer@server1 " +"adalah</p>\n" +"<p> adalah Off bukan adalah lokal dari unama</p>\n" +"<p> default</p> t" + +#: cupsd.conf.template.cpp:681 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max jobs (MaxJobs)</b>\n" +"<p>\n" +"Maximum number of jobs to keep in memory (active and completed).\n" +"Default is 0 (no limit).</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Max</b>\n" +"<p> nombor dari kepada in aktif dan selesai adalah tidak</p> t" + +#: cupsd.conf.template.cpp:687 +#, fuzzy +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max jobs per user (MaxJobsPerUser)</b>\n" +"<p>\n" +"The MaxJobsPerUser directive controls the maximum number of <i>active</i>\n" +"jobs that are allowed for each user. Once a user reaches the limit, new\n" +"jobs will be rejected until one of the active jobs is completed, stopped,\n" +"aborted, or canceled.</p>\n" +"<p>\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"</p>\n" +msgstr "" +"Buat bukan e\n" +"<b> Max</b>\n" +"<p> nombor dari<i> aktif</i> for dari aktif adalah selesai atau</p>\n" +"<p> kepada adalah tidak\n" +"</p> t" + +#: cupsd.conf.template.cpp:699 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Max jobs per printer (MaxJobsPerPrinter)</b>\n" +"<p>\n" +"The MaxJobsPerPrinter directive controls the maximum number of <i>active</i>\n" +"jobs that are allowed for each printer or class. Once a printer or class\n" +"reaches the limit, new jobs will be rejected until one of the active jobs\n" +"is completed, stopped, aborted, or canceled.</p>\n" +"<p>\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"</p>\n" +msgstr "" +"<b>Tugas maksimum per pencetak (MaxJobsPerPrinter)</b>\n" +"<p>\n" +"Arahan MaxJobsPerPrinter mengawal jumlah maksimum tugas <i>aktif</i>\n" +"yang dibenarkan bagi setiap pencetak atau kelas. Sebaik pencetak atau kelas\n" +"mencapai had, tugas baru akan ditolak sehingga satu dari tugas aktif\n" +"telah selesai, berhenti, di hentipaksa, atau dibatalkan.</p>\n" +"<p>\n" +"Menetapkan maksimum ke 0 mematikan fungsi ini.\n" +"Default adalah 0 (tiada had).\n" +"</p>\n" + +#: cupsd.conf.template.cpp:711 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Port</b>\n" +"<p>\n" +"The port value that the CUPS daemon is listening to. Default is 631.</p>\n" +msgstr "" +"<b>Port</b>\n" +"<p>\n" +"Nilai port yang didengari oleh daemon CUPS. Default adalah 631.</p>\n" + +#: cupsd.conf.template.cpp:716 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<b>Address</b>\n" +"<p>\n" +"The address that the CUPS daemon is listening at. Leave it empty or use\n" +"an asterisk (*) to specify a port value on the entire subnetwork.</p>\n" +msgstr "" +"<b>Alamat</b>\n" +"<p>\n" +"Alamat yang daemon CUPS sedang dengar. Biarkan kosong atau guna\n" +"asterik (*) untuk menyatakan nilai port pada semua subrangkaian.</p>\n" + +#: cupsd.conf.template.cpp:722 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, " +"etc.)\n" +"<p>Check this box if you want to use SSL encryption with this address/port.\n" +"</p>\n" +msgstr "" +"<p>Tanda kekotak ini jika anda hendak menggunakan enkripsi SSL dengan " +"alamat/port ini.\n" +"</p>\n" + +#: cupsdbrowsingpage.cpp:37 +msgid "Browsing" +msgstr "Layar" + +#: cupsdbrowsingpage.cpp:38 +msgid "Browsing Settings" +msgstr "Tetapan Pelayar" + +#: cupsdbrowsingpage.cpp:44 +msgid "Use browsing" +msgstr "Guna pelayar" + +#: cupsdbrowsingpage.cpp:49 +msgid "Implicit classes" +msgstr "Kelas implisit" + +#: cupsdbrowsingpage.cpp:50 +msgid "Hide implicit members" +msgstr "Sorok ahli implisit" + +#: cupsdbrowsingpage.cpp:51 +msgid "Use short names" +msgstr "Guna nama pendek" + +#: cupsdbrowsingpage.cpp:52 +msgid "Use \"any\" classes" +msgstr "Guna \"mana-mana\" kelas" + +#: cupsdbrowsingpage.cpp:54 locationdialog.cpp:66 +msgid "Allow, Deny" +msgstr "Benarkan, Halang" + +#: cupsdbrowsingpage.cpp:55 locationdialog.cpp:67 +msgid "Deny, Allow" +msgstr "Halang, Benarkan" + +#: cupsdbrowsingpage.cpp:61 cupsdbrowsingpage.cpp:64 cupsdnetworkpage.cpp:53 +#: cupsdnetworkpage.cpp:61 +msgid " sec" +msgstr " saat" + +#: cupsdbrowsingpage.cpp:66 +msgid "Browse port:" +msgstr "Liang lungsur:" + +#: cupsdbrowsingpage.cpp:67 +msgid "Browse interval:" +msgstr "Ruang lungsur:" + +#: cupsdbrowsingpage.cpp:68 +msgid "Browse timeout:" +msgstr "Had masa lungsur:" + +#: cupsdbrowsingpage.cpp:69 +msgid "Browse addresses:" +msgstr "Alamat lungsur:" + +#: cupsdbrowsingpage.cpp:70 +msgid "Browse order:" +msgstr "Arahan lungsur:" + +#: cupsdbrowsingpage.cpp:71 +msgid "Browse options:" +msgstr "Lungsur pilihan:" + +#: cupsdconf.cpp:811 cupsdconf.cpp:834 cupsdconf.cpp:850 +msgid "" +"_: Base\n" +"Root" +msgstr "Root" + +#: cupsdconf.cpp:811 cupsdconf.cpp:831 cupsdconf.cpp:852 +msgid "All printers" +msgstr "Semua pencetak" + +#: cupsdconf.cpp:811 cupsdconf.cpp:832 cupsdconf.cpp:853 +msgid "All classes" +msgstr "Semua kelas" + +#: cupsdconf.cpp:811 cupsdconf.cpp:833 cupsdconf.cpp:855 +msgid "Print jobs" +msgstr "Tugas cetak" + +#: cupsdconf.cpp:812 cupsdconf.cpp:830 cupsdconf.cpp:851 +msgid "Administration" +msgstr "Pentadbiran" + +#: cupsdconf.cpp:813 cupsdconf.cpp:840 cupsdconf.cpp:843 cupsdconf.cpp:864 +msgid "Class" +msgstr "Kelas" + +#: cupsdconf.cpp:814 cupsdconf.cpp:835 cupsdconf.cpp:838 cupsdconf.cpp:858 +msgid "Printer" +msgstr "Pencetak" + +#: cupsdconf.cpp:854 +msgid "Root" +msgstr "Root" + +#: cupsddialog.cpp:113 +msgid "Short Help" +msgstr "Bantuan Ringkas" + +#: cupsddialog.cpp:126 +msgid "CUPS Server Configuration" +msgstr "Penyelarasan Pelayan CUPS" + +#: cupsddialog.cpp:173 +msgid "Error while loading configuration file!" +msgstr "Ralat semasa memuatkan fail penyelarasan!" + +#: cupsddialog.cpp:173 cupsddialog.cpp:192 cupsddialog.cpp:258 +#: cupsddialog.cpp:313 +msgid "CUPS Configuration Error" +msgstr "Ralat Penyelarasan CUPS" + +#: cupsddialog.cpp:182 +msgid "" +"Some options were not recognized by this configuration tool. They will be left " +"untouched and you won't be able to change them." +msgstr "" +"Terdapat pilihan yang tidak dikenali oleh alatan konfigurasi ini. IA akan " +"ditinggalkan tidak berusik dan anda tidak akan dapat mengubahnya." + +#: cupsddialog.cpp:184 +msgid "Unrecognized Options" +msgstr "Pilihan Tidak Dapat Dipastikan" + +#: cupsddialog.cpp:204 +msgid "Unable to find a running CUPS server" +msgstr "Tidak menemui pelayan CUPS yang sedang dilaksanakan" + +#: cupsddialog.cpp:218 +msgid "Unable to restart CUPS server (pid = %1)" +msgstr "Gagal memulakan semula pelayan CUPS (pid = %1)" + +#: cupsddialog.cpp:239 +msgid "" +"Unable to retrieve configuration file from the CUPS server. You probably don't " +"have the access permissions to perform this operation." +msgstr "" +"Tidak dapat mengambil fail konfigurasi daripada pelayan CUPS. Anda mungkin " +"tidak mempunyai kebenaran capaian untuk melakukan operasi ini." + +#: cupsddialog.cpp:249 +msgid "Internal error: file '%1' not readable/writable!" +msgstr "Ralat dalaman:fail '%1' tidak bukan bolehbaca/bolehtulis!" + +#: cupsddialog.cpp:252 +msgid "Internal error: empty file '%1'!" +msgstr "Ralat dalaman: fail kosong '%1'!" + +#: cupsddialog.cpp:270 +msgid "" +"The config file has not been uploaded to the CUPS server. The daemon will not " +"be restarted." +msgstr "" +"Fail konfig belum dimuatnaik ke pelayan CUPS. Daemon belum diulanghidup." + +#: cupsddialog.cpp:274 +msgid "" +"Unable to upload the configuration file to CUPS server. You probably don't have " +"the access permissions to perform this operation." +msgstr "" +"Tidak dapat muatnaik fail konfigurasi ke pelayan CUPS. Anda mungkin tidak " +"mempunyai kebenaran capaian untuk melakukan operasi ini." + +#: cupsddialog.cpp:277 +msgid "CUPS configuration error" +msgstr "Ralat penyelarasan CUPS" + +#: cupsddialog.cpp:308 +#, c-format +msgid "Unable to write configuration file %1" +msgstr "Gagal menulis fail penyelarasan fail %1" + +#: cupsddirpage.cpp:34 +msgid "Folders" +msgstr "Folder " + +#: cupsddirpage.cpp:35 +msgid "Folders Settings" +msgstr "Tetapan Folder" + +#: cupsddirpage.cpp:46 +msgid "Data folder:" +msgstr "Folder data:" + +#: cupsddirpage.cpp:47 +msgid "Document folder:" +msgstr "Folder dokumen:" + +#: cupsddirpage.cpp:48 +msgid "Font path:" +msgstr "Laluan Font:" + +#: cupsddirpage.cpp:49 +msgid "Request folder:" +msgstr "Pohon folder:" + +#: cupsddirpage.cpp:50 +msgid "Server binaries:" +msgstr "Binari pelayan:" + +#: cupsddirpage.cpp:51 +msgid "Server files:" +msgstr "Fail pelayan:" + +#: cupsddirpage.cpp:52 +msgid "Temporary files:" +msgstr "Fail sementara:" + +#: cupsdfilterpage.cpp:36 +msgid "Filter" +msgstr "Penapis" + +#: cupsdfilterpage.cpp:37 +msgid "Filter Settings" +msgstr "Tetapan Penapis" + +#: cupsdfilterpage.cpp:46 cupsdjobspage.cpp:47 cupsdjobspage.cpp:49 +#: cupsdjobspage.cpp:52 cupsdnetworkpage.cpp:52 cupsdnetworkpage.cpp:60 +#: sizewidget.cpp:39 +msgid "Unlimited" +msgstr "Tanpa had" + +#: cupsdfilterpage.cpp:49 +msgid "User:" +msgstr "Pengguna:" + +#: cupsdfilterpage.cpp:50 +msgid "Group:" +msgstr "Kumpulan:" + +#: cupsdfilterpage.cpp:51 +msgid "RIP cache:" +msgstr "Penyimpan RIP:" + +#: cupsdfilterpage.cpp:52 +msgid "Filter limit:" +msgstr "Had Penapis:" + +#: cupsdjobspage.cpp:34 +msgid "Jobs" +msgstr "Tugas" + +#: cupsdjobspage.cpp:35 +msgid "Print Jobs Settings" +msgstr "Tetapan Tugas Cetak" + +#: cupsdjobspage.cpp:38 +msgid "Preserve job history" +msgstr "Simpan rekod tugas" + +#: cupsdjobspage.cpp:39 +msgid "Preserve job files" +msgstr "Simpan fail tugas" + +#: cupsdjobspage.cpp:40 +msgid "Auto purge jobs" +msgstr "Tugas Autobersih" + +#: cupsdjobspage.cpp:55 +msgid "Max jobs:" +msgstr "Paras maksimum. tugas:" + +#: cupsdjobspage.cpp:56 +msgid "Max jobs per printer:" +msgstr "Paras maksimum. tugas setiap pencetak:" + +#: cupsdjobspage.cpp:57 +msgid "Max jobs per user:" +msgstr "Paras maksimum. tugas setiap pengguna:" + +#: cupsdlogpage.cpp:36 +msgid "Log" +msgstr "Log" + +#: cupsdlogpage.cpp:37 +msgid "Log Settings" +msgstr "Tetapan Log" + +#: cupsdlogpage.cpp:46 +msgid "Detailed Debugging" +msgstr "Perincian Nyah-pepijat" + +#: cupsdlogpage.cpp:47 +msgid "Debug Information" +msgstr "Maklumat Nyah-pepijat" + +#: cupsdlogpage.cpp:48 +msgid "General Information" +msgstr "Maklumat Umum" + +#: cupsdlogpage.cpp:49 +msgid "Warnings" +msgstr "Amaran" + +#: cupsdlogpage.cpp:50 +msgid "Errors" +msgstr "Ralat" + +#: cupsdlogpage.cpp:51 +msgid "No Logging" +msgstr "Tiada Log" + +#: cupsdlogpage.cpp:58 +msgid "Access log:" +msgstr "Log capaian:" + +#: cupsdlogpage.cpp:59 +msgid "Error log:" +msgstr "Log ralat:" + +#: cupsdlogpage.cpp:60 +msgid "Page log:" +msgstr "Halaman log:" + +#: cupsdlogpage.cpp:61 +msgid "Max log size:" +msgstr "Saiz maksimum log:" + +#: cupsdlogpage.cpp:62 +msgid "Log level:" +msgstr "Paras log:" + +#: cupsdnetworkpage.cpp:38 +msgid "Network" +msgstr "Rangkaian" + +#: cupsdnetworkpage.cpp:39 +msgid "Network Settings" +msgstr "Tetapan Rangkaian" + +#: cupsdnetworkpage.cpp:42 +msgid "Keep alive" +msgstr "Biarkan hidup" + +#: cupsdnetworkpage.cpp:65 +msgid "Double" +msgstr "Ganda dua" + +#: cupsdnetworkpage.cpp:67 +msgid "Hostname lookups:" +msgstr "Lihat namahos:" + +#: cupsdnetworkpage.cpp:68 +msgid "Keep-alive timeout:" +msgstr "Biarkan had masa:" + +#: cupsdnetworkpage.cpp:69 +msgid "Max clients:" +msgstr "Paras maksimum klien:" + +#: cupsdnetworkpage.cpp:70 +msgid "Max request size:" +msgstr "Saiz maksimum diminta:" + +#: cupsdnetworkpage.cpp:71 +msgid "Client timeout:" +msgstr "Had masa llien:" + +#: cupsdnetworkpage.cpp:72 +msgid "Listen to:" +msgstr "Dengar ke:" + +#: cupsdsecuritypage.cpp:38 +msgid "Security" +msgstr "Keselamatan" + +#: cupsdsecuritypage.cpp:39 +msgid "Security Settings" +msgstr "Tetapan Keselamatan" + +#: cupsdsecuritypage.cpp:49 +msgid "Remote root user:" +msgstr "Pengguna root jauh:" + +#: cupsdsecuritypage.cpp:50 +msgid "System group:" +msgstr "Kumpulan sistem:" + +#: cupsdsecuritypage.cpp:51 +msgid "Encryption certificate:" +msgstr "Sijil enkripsi:" + +#: cupsdsecuritypage.cpp:52 +msgid "Encryption key:" +msgstr "Kunci Enkripsi:" + +#: cupsdsecuritypage.cpp:53 +msgid "Locations:" +msgstr "Lokasi:" + +#: cupsdsecuritypage.cpp:128 +msgid "" +"This location is already defined. Do you want to replace the existing one?" +msgstr "" +" Lokasi ini telah ditakrifkan. Adakah anda mahu menggantikan dengan yang baru?" + +#: cupsdserverpage.cpp:43 +msgid "Server" +msgstr "Pelayan" + +#: cupsdserverpage.cpp:44 +msgid "Server Settings" +msgstr "Tetapan Pelayan" + +#: cupsdserverpage.cpp:55 +msgid "Allow overrides" +msgstr "Benarkan tindih" + +#: cupsdserverpage.cpp:57 locationdialog.cpp:49 locationdialog.cpp:53 +msgid "None" +msgstr "Tiada" + +#: cupsdserverpage.cpp:58 +msgid "Classified" +msgstr "Peribadi" + +#: cupsdserverpage.cpp:59 +msgid "Confidential" +msgstr "Sulit" + +#: cupsdserverpage.cpp:60 +msgid "Secret" +msgstr "Rahsia" + +#: cupsdserverpage.cpp:61 +msgid "Top Secret" +msgstr "Rahsia Besar" + +#: cupsdserverpage.cpp:62 +msgid "Unclassified" +msgstr "Bukan peribadi" + +#: cupsdserverpage.cpp:63 +msgid "Other" +msgstr "Lain-lain" + +#: cupsdserverpage.cpp:83 +msgid "Server name:" +msgstr "Nama pelayan:" + +#: cupsdserverpage.cpp:84 +msgid "Server administrator:" +msgstr "Pentadbir pelayan:" + +#: cupsdserverpage.cpp:85 +msgid "Classification:" +msgstr "Pengelasan:" + +#: cupsdserverpage.cpp:86 +msgid "Default character set:" +msgstr "Set aksara default:" + +#: cupsdserverpage.cpp:87 +msgid "Default language:" +msgstr "Bahasa default:" + +#: cupsdserverpage.cpp:88 +msgid "Printcap file:" +msgstr "Fail printcap:" + +#: cupsdserverpage.cpp:89 +msgid "Printcap format:" +msgstr "Format printcap:" + +#: cupsdsplash.cpp:31 +msgid "Welcome to the CUPS Server Configuration Tool" +msgstr "Selamat Datang ke Alat Penyelarasan Pelayan CUPS" + +#: cupsdsplash.cpp:32 +msgid "Welcome" +msgstr "Selamat Datang" + +#: cupsdsplash.cpp:49 +msgid "" +"<p>This tool will help you to configure graphically the server of the CUPS " +"printing system. The available options are grouped into sets of related topics " +"and can be accessed quickly through the icon view located on the left. Each " +"option has a default value that is shown if it has not been previously set. " +"This default value should be OK in most cases.</p>" +"<br>" +"<p>You can access a short help message for each option using either the '?' " +"button in the the title bar, or the button at the bottom of this dialog.</p>" +msgstr "" +"<p>Alatan ini akan membantu anda untuk menetapkan secara grafik pelayan bagi " +"sistem cetakan CUPS. Pilihan yang didapati dikumpulkan ke dalam set topik " +"berkaitan dan boleh diakses dengan cepat melalui paparan ikon terletak di " +"bahagian kiri. Setiap pilihan mempunyai nilai default yang dipaparkan jika ia " +"tidak ditetapkan sebelumnya. Nilai default ini sepatutnya OK dalam kebanyakan " +"keadaan.</p>" +"<br>" +"<p>Anda boleh mengakses mesej bantuan pendek untuk setiap pilihan dengan " +"menggunakan sama ada butang '?' dalam bar tajuk, atau butang pada bahagian " +"bawah dialog ini.</p>" + +#: editlist.cpp:33 +msgid "Add..." +msgstr "Tambah..." + +#: editlist.cpp:34 +msgid "Edit..." +msgstr "Edit..." + +#: editlist.cpp:36 +msgid "Default List" +msgstr "Senarai Default" + +#: locationdialog.cpp:50 +msgid "Basic" +msgstr "Asas" + +#: locationdialog.cpp:51 +msgid "Digest" +msgstr "Rencana" + +#: locationdialog.cpp:54 +msgid "User" +msgstr "Pengguna" + +#: locationdialog.cpp:55 +msgid "System" +msgstr "Sistem" + +#: locationdialog.cpp:56 +msgid "Group" +msgstr "Kumpulan" + +#: locationdialog.cpp:58 +msgid "Always" +msgstr "Sentiasa" + +#: locationdialog.cpp:59 +msgid "Never" +msgstr "Tidak sekali" + +#: locationdialog.cpp:60 +msgid "Required" +msgstr "Dikehendaki" + +#: locationdialog.cpp:61 +msgid "If Requested" +msgstr "Jika Dikehendaki" + +#: locationdialog.cpp:63 +msgid "All" +msgstr "Semua" + +#: locationdialog.cpp:64 +msgid "Any" +msgstr "Sebarang" + +#: locationdialog.cpp:72 +msgid "Resource:" +msgstr "Sumber:" + +#: locationdialog.cpp:73 +msgid "Authentication:" +msgstr "Pengesahan:" + +#: locationdialog.cpp:74 +msgid "Class:" +msgstr "Kelas:" + +#: locationdialog.cpp:75 +msgid "Names:" +msgstr "Nama:" + +#: locationdialog.cpp:76 +msgid "Encryption:" +msgstr "Enkripsi:" + +#: locationdialog.cpp:77 +msgid "Satisfy:" +msgstr "Memuaskan:" + +#: locationdialog.cpp:78 +msgid "ACL order:" +msgstr "Turutan ACL:" + +#: locationdialog.cpp:79 +msgid "ACL addresses:" +msgstr "Alamat ACL:" + +#: locationdialog.cpp:100 +msgid "Location" +msgstr "Lokasi" + +#: main.cpp:29 +msgid "Configuration file to load" +msgstr "Penyelarasan fail untuk dimuat" + +#: main.cpp:36 main.cpp:37 +msgid "A CUPS configuration tool" +msgstr "Alatan konfigurasi CUPS" + +#: portdialog.cpp:41 +msgid "Use SSL encryption" +msgstr "Guna enkripsi SSL" + +#: portdialog.cpp:44 +msgid "Port:" +msgstr "Liang:" + +#: portdialog.cpp:55 +msgid "Listen To" +msgstr "Dengar Kepada" + +#: sizewidget.cpp:34 +msgid "KB" +msgstr "KB" + +#: sizewidget.cpp:35 +msgid "MB" +msgstr "MB" + +#: sizewidget.cpp:36 +msgid "GB" +msgstr "GB" + +#: sizewidget.cpp:37 +msgid "Tiles" +msgstr "Jubin" |