1 files changed, 1726 insertions, 0 deletions
diff --git a/tde-i18n-sr@Latn/messages/kdebase/ksysguard.po b/tde-i18n-sr@Latn/messages/kdebase/ksysguard.po
new file mode 100644
index 00000000000..4bbe4344c1a
--- /dev/null
+++ b/tde-i18n-sr@Latn/messages/kdebase/ksysguard.po
@@ -0,0 +1,1726 @@
+# translation of ksysguard.po to Serbian
+# KTranslator Generated File
+# Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+#
+#
+# Ljubisa Radivojevic <claw@claw.co.yu>, 2000.
+# Toplica Tanaskovic <toptan@sezampro.yu>, 2003.
+# Toplica Tanaskovic <toptan@kde.org.yu>, 2003.
+# Chusslove Illich <caslav.ilic@gmx.net>, 2004, 2005, 2006, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysguard\n"
+"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"PO-Revision-Date: 2007-01-06 22:38+0100\n"
+"Last-Translator: Chusslove Illich <caslav.ilic@gmx.net>\n"
+"Language-Team: Serbian <kde-i18n-sr@kde.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "Ne mogu da otvorim fajl %1."
+
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "Fajl %1 ne sadrži ispravan XML."
+
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"Fajl %1 ne sadrži ispravnu definiciju radnog lista, koja mora imati definisanu "
+"vrstu dokumenta „KSysGuardWorkSheet“."
+
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "Fajl %1 ima neispravnu veličinu radnog lista."
+
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "Ne mogu da snimim fajl %1"
+
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "Klipbord ne sadrži ispravan opis prikaza."
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "Nemoguće je povezati se na „%1“."
+
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "Izaberite vrstu prikaza"
+
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "Crtač &signala"
+
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "&Multimetar"
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "&Trakasti grafikon"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "Zapisivač dn&evnika senzora"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"Poruka od %1:\n"
+"%2"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "Podešavanja tajmera"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "Koristi interval ažuriranja radnog lista"
+
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "Interval ažuriranja:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:21
+#, no-c-format
+msgid " sec"
+msgstr " sek."
+
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "Svi prikazi lista se ažuriraju prema veličini koju navedete ovde."
+
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "Domaćin za povezivanje"
+
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "Domaćin:"
+
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "Unesite ime domaćina na koji želite da se povežete."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "Vrsta veze"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr ""
+"Odaberite ovo da biste koristili sigurnu školjku (ssh) za prijavljivanje na "
+"udaljeni domaćin."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr ""
+"Izaberite ovo da biste koristili udaljenu ljusku da se prijavite na udaljeni "
+"domaćin."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "Demon"
+
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
+msgstr ""
+"Odaberite ovo ako želite da se povežete sa ksysguard demonom koji se izvršava "
+"na mašini na koju želite da se povežete, i koji očekuje zahteve klijenata."
+
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "Prilagođena naredba"
+
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr ""
+"Izaberite ovo da biste koristili dole unešenu naredbu da pokrenete ksysguardd "
+"na udaljenom domaćinu."
+
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "Port:"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr "Unesite broj porta na kome ksysguard demon sluša za vezama."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g.  3112"
+msgstr "npr. 3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "Naredba:"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr ""
+"Unesite naredbu koja pokreće ksysguardd na domaćinu koji želite da nadzirete."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "npr. ssh -l root udaljeni.host.org ksysguardd"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "Globalne postavke stila"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "Stil prikaza"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "Prva boja ispisa:"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "Druga boja ispisa:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:126
+#, no-c-format
+msgid "Alarm color:"
+msgstr "Alarmna boja:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
+#, no-c-format
+msgid "Background color:"
+msgstr "Boja pozadine:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "Veličina fonta:"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "Boje senzora"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "Promeni boju..."
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "Boja %1"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "Opterećenje procesora"
+
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "Opterećenje nezauzetih procesa"
+
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "Sistemsko opterećenje"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Opterećenje finih procesa"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "Korisničko opterećenje"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "Memorija"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "Fizička memorija"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "Virtuelna memorija"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "Keširana memorija"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "Baferisana memorija"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "Zauzeta memorija"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "Memorija programa"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "Slobodna memorija"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "Broj procesa"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "Kontroler procesa"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "Propusni opseg diska"
+
+#: ksgrd/SensorManager.cc:66
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "Opterećenje"
+
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "Ukupno pristupâ"
+
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "Pristupi čitanja"
+
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "Pristupi pisanja"
+
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "Učitano podataka"
+
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "Zapisano podataka"
+
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "Ušlih stranica"
+
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "Izašlih stranica"
+
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "Zamena konteksta"
+
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "Mreža"
+
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "Interfejsi"
+
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "Prijemnik"
+
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "Odašiljač"
+
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "Podaci"
+
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "Kompresovani paketi"
+
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "Ispušteni paketi"
+
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "Greške"
+
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "FIFO prepunjavanja"
+
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "Greške okvira"
+
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "Višestruki prenos"
+
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "Paketi"
+
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "Nosilac"
+
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "Sudari"
+
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "Soketi"
+
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "Ukupan broj"
+
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "Tabela"
+
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "Napredno upravljanje energijom (APM)"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "Termalna zona"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "Temperatura"
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "Ventilator"
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "Stanje"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "Baterija"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "Popunjenost baterija"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "Iskorišćenost baterija"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "Preostalo vreme"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "Prekidi"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "Prosečno opterećenje (1 minut)"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "Prosečno opterećenje (5 minuta)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "Prosečno opterećenje (15 minuta)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "Učestanost časovnika"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "Hardverski senzori"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "Iskorišćenost particija"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "Iskorišćen prostor"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "Slobodan prostor"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "Nivo popunjavanja"
+
+#: ksgrd/SensorManager.cc:115
+#, c-format
+msgid "CPU%1"
+msgstr "CPU%1"
+
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "Disk%1"
+
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "Ventilator%1"
+
+#: ksgrd/SensorManager.cc:124
+#, c-format
+msgid "Temperature%1"
+msgstr "Temperatura%1"
+
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "Ukupno"
+
+#: ksgrd/SensorManager.cc:133
+#, c-format
+msgid "Int%1"
+msgstr "Prekid%1"
+
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
+
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "kB"
+
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "min."
+
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "Celobrojna vrednost"
+
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "Vrednost u pokretnom zarezu"
+
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "Veza sa %1 je izgubljena."
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "Veza sa %1 je odbijena"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "Domaćin %1 nije pronađen"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "Vreme isticanja kod domaćina %1"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "Mrežni krah domaćin %1"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Aleksandar Dezelin,Toplica Tanasković"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "deza@milnet.co.yu,toptan@kde.org.yu"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"Ovo je vaš radni prostor. On sadrži radne listove. Morate napraviti novi radni "
+"list (meni Fajl -> Novi) pre nego što ovde dovučete senzore."
+
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "Tabela procesa"
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "List %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"Radni list „%1“ sadrži nesnimljene podatke\n"
+"Želite li da snimite radni list?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|Senzorski fajlovi"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "Izaberite radni list za učitavanje"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "Ne posedujete radni list koji može biti snimljen."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "Snimi tekući radni list kao"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "Ne postoje radni listovi koji mogu biti obrisani."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "Ne mogu da nađem fajl „ProcessTable.sgrd“."
+
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "Podešavanja Zaštite sistema"
+
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "Broj prikaza:"
+
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "Odnos veličina:"
+
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "pokrenut"
+
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "uspavan"
+
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "uspavan na disk"
+
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "zombi"
+
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "zaustavljen"
+
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "upisivanje stranica"
+
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "neaktivan"
+
+#: SensorDisplayLib/ProcessList.cc:250
+msgid "Remove Column"
+msgstr "Ukloni kolonu"
+
+#: SensorDisplayLib/ProcessList.cc:251
+msgid "Add Column"
+msgstr "Dodaj kolonu"
+
+#: SensorDisplayLib/ProcessList.cc:252
+msgid "Help on Column"
+msgstr "Pomoć oko kolone"
+
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:771
+msgid "Nice"
+msgstr "Fin"
+
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Hide Column"
+msgstr "Sakrij kolonu"
+
+#: SensorDisplayLib/ProcessList.cc:782
+msgid "Show Column"
+msgstr "Prikaži kolonu"
+
+#: SensorDisplayLib/ProcessList.cc:786
+msgid "Select All Processes"
+msgstr "Odaberi sve procese"
+
+#: SensorDisplayLib/ProcessList.cc:787
+msgid "Unselect All Processes"
+msgstr "Poništi izbor za sve procese"
+
+#: SensorDisplayLib/ProcessList.cc:793
+msgid "Select All Child Processes"
+msgstr "Odaberi sve dečje procese"
+
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Unselect All Child Processes"
+msgstr "Poništi izbor svih dečjih procesa"
+
+#: SensorDisplayLib/ProcessList.cc:796
+msgid "SIGABRT"
+msgstr "SIGABRT"
+
+#: SensorDisplayLib/ProcessList.cc:797
+msgid "SIGALRM"
+msgstr "SIGALRM"
+
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
+
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "SIGCONT"
+msgstr "SIGCONT"
+
+#: SensorDisplayLib/ProcessList.cc:800
+msgid "SIGFPE"
+msgstr "SIGFPE"
+
+#: SensorDisplayLib/ProcessList.cc:801
+msgid "SIGHUP"
+msgstr "SIGHUP"
+
+#: SensorDisplayLib/ProcessList.cc:802
+msgid "SIGILL"
+msgstr "SIGILL"
+
+#: SensorDisplayLib/ProcessList.cc:803
+msgid "SIGINT"
+msgstr "SIGINT"
+
+#: SensorDisplayLib/ProcessList.cc:804
+msgid "SIGKILL"
+msgstr "SIGKILL"
+
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
+
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
+
+#: SensorDisplayLib/ProcessList.cc:807
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
+
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
+
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGTERM"
+msgstr "SIGTERM"
+
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
+
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
+
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
+
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
+
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
+
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "Send Signal"
+msgstr "Pošalji signal"
+
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "Renice Process..."
+msgstr "Ponovo uskladi proces..."
+
+#: SensorDisplayLib/ProcessList.cc:873
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr ""
+"Da li stvarno želite da pošaljete signal %1 odabranom %n procesu?\n"
+"Da li stvarno želite da pošaljete signal %1 odabranim %n procesa?\n"
+"Da li stvarno želite da pošaljete signal %1 odabranim %n procesa?"
+
+#: SensorDisplayLib/ProcessList.cc:877
+msgid "Send"
+msgstr "Pošalji"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "Izmenite podešavanja trakastog grafikona"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "Opseg"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
+#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#, no-c-format
+msgid "Title"
+msgstr "Naslov"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "Ovde unesite naslov prikaza."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "Opseg prikaza"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "Najmanja vrednost:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Ovde unesite minimalnu vrednost prikaza. Ako su obe vrednosti 0 aktiviraće se "
+"automatsko utvrđivanje opsega."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "Najveća vrednost:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Ovde unesite maksimalnu vrednost prikaza. Ako su obe vrednosti 0 aktiviraće se "
+"automatsko utvrđivanje opsega."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#, no-c-format
+msgid "Alarms"
+msgstr "Alarmi"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "Alarm za minimalnu vrednost"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "Uključi alarm"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "Uključi alarm minimalne vrednosti."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#, no-c-format
+msgid "Lower limit:"
+msgstr "Donja granica:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "Alarm za maksimalnu vrednost"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "Uključi alarm maksimalne vrednosti."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "Upper limit:"
+msgstr "Gornja granica:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "Izgled"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "Uobičajena boja trake:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "Boja za vrednosti van opsega:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the bars. "
+"Bars are automatically suppressed if text becomes too large, so it is advisable "
+"to use a small font size here."
+msgstr ""
+"Ovo određuje veličinu fonta koji se koristi za štampanje oznaka ispod traka. "
+"Trake se automatski izbacuju ako tekst postane prevelik, tako da je "
+"preporučljivo da ovde koristite malu veličinu fonta."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "Senzori"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "Domaćin"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "Senzor"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "Oznaka"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "Merna jedinica"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "Status"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "Uredi..."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "Pritisnite ovo dugme da podesite oznaku."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "Pritisnite ovo dugme da uklonite senzor."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "Naziv trakastog grafikona"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "Unesite novu oznaku:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "Podešavanja crtača signala"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "Stil"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "Naslov:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "Stil crtanja grafikona"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "Osnovni poligoni"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "Originalno — jedna linija po svakoj tački podataka"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "Razmere"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "Uspravna razmera"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "Automatsko otkrivanje opsega"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify the "
+"range you want in the fields below."
+msgstr ""
+"Izaberite ovu opciju ako želite da se opseg prikaza dinamički prilagođava "
+"trenutno prikazanim vrednostima. Ako ne izaberete ovo, morate navesti opseg "
+"koji želite u poljima ispod."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "Vodoravna razmera"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "piksela po vremenskom periodu"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "Mreža"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "Linije"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "Uspravne linije"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr ""
+"Izaberite ovo da biste aktivirali vertikalne linije ako je prikaz dovoljno "
+"velik."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "Rastojanje:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "Ovde unesite rastojanje između dve vertikalne linije."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "Pomeranje uspravnih linija"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "Vodoravne linije"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr ""
+"Izaberite ovo da biste aktivirali vodoravne linije ako je prikaz dovoljno "
+"velik."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "Broj:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "Ovde unesite broj vodoravnih linija."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#, no-c-format
+msgid "Text"
+msgstr "Tekst"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "Oznake"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr ""
+"Izaberite ovu opciju ako bi vodoravne linije trebale da budu ukrašene "
+"vrednostima koje označavaju."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "Gornja traka"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"Izaberite ovo da biste aktivirali naslovnu traku prikaza. Ovo je najverovatnije "
+"korisno samo za prikaze apleta. Traka je vidljiva samo ako je prikaz dovoljno "
+"velik."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
+#: rc.cpp:117 rc.cpp:138
+#, no-c-format
+msgid "Colors"
+msgstr "Boje"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "Uspravne linije:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "Vodoravne linije:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "Pozadina:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "Postavi boju..."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr "Pritisnite ovo dugme da biste podesili boju senzora u dijagramu."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "Pomeri gore"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "Pomeri dole"
+
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "Upisivač dnevnika senzora"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "Pokreni &Zaštitu sistema"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "&Svojstva"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "&Ukloni prikaz"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "Pode&si period ažuriranja..."
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "&Nastavi ažuriranje"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "P&auziraj ažuriranje"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt>"
+"<p>Ovo je prikazivač senzora. Da prilagodite prikazivač senzora kliknite i "
+"zadržite pritisnutim desno dugme miša iznad okvira ili kutije prikazivača i "
+"potom izaberite stavku <i>Podešavanja</i> iz iskačućeg menija. Izaberite <i>"
+"Ukloni</i> ako želite da uklonite prikaz sa radnog lista.</p>%1</qt>"
+
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "Upisivanje u dnevnik"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#, no-c-format
+msgid "Timer Interval"
+msgstr "Period tajmera"
+
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "Ime senzora"
+
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "Ime domaćina"
+
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "Fajl sa zapisom dnevnika"
+
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "&Ukloni senzor"
+
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "Ur&edi senzor..."
+
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "Zaustavi v&ođenje dnevnika"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "&Pokreni vođenje dnevnika"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#, no-c-format
+msgid "Foreground color:"
+msgstr "Boja ispisa:"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "Podešavanja multimetra"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "Postavke pregleda liste"
+
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "Uskladi proces"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"Krenuli ste da promenite unapred određeni prioritet\n"
+"procesu %1. Jedino superkorisnik (root) može da\n"
+"snizi prioritet procesu. Što je broj manji, to je \n"
+"prioritet veći.\n"
+"\n"
+"Unesite nivo prioriteta koji želite:"
+
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "Podešavanja upisivača dnevnika senzora"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "Spusti ovde senzor"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
+msgstr ""
+"Ovo je prazan prostor radnog lista. Dovucite senzor iz pretraživača senzora i "
+"spustite ga ovde. Pojaviće se prikaz senzora koji vam omogućuje praćenje "
+"vrednosti senzora u vremenu."
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "Ime"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "Korisnik%"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "Sistem%"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VmSize"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VmRss"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "Prijava"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "Naredba"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "Svi procesi"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "Sistemski procesi"
+
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "Korisnički procesi"
+
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "Vaši procesi"
+
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "S&tablo"
+
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "Os&veži"
+
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "&Ubij"
+
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1: Pokrenuti procesi"
+
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "Morate prvo izabrati proces."
+
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr ""
+"Da li zaista želite da ubijete %n izabran proces?\n"
+"Da li zaista želite da ubijete %n izabrana procesa?\n"
+"Da li zaista želite da ubijete %n izabranih procesa?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "Ubij procese"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "Ubij"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "Ne pitaj ponovo"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "Greška prilikom pokušaja da se ubije proces %1."
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "Nedovoljno prava pristupa za ubijanje procesa %1."
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "Proces %1 je već nestao."
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "Neispravan signal."
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "Greška prilikom pokušaja da se proces %1 ponovo uskladi."
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "Nedovoljno prava pristupa za ponovno usklađivanje procesa %1."
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "Neispravan argument."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
+#: rc.cpp:27 rc.cpp:78
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "&Uključi alarm"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
+#: rc.cpp:39 rc.cpp:66
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "U&ključi alarm"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:54
+#, no-c-format
+msgid "&Show unit"
+msgstr "&Prikaži mernu jedinicu"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:57
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "Aktivirajte ovo da biste dodali mernu jedinicu naslovu prikaza."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:90
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "Uobičajena boja za cifre:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:93
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "Boja za cifre alarma:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
+#: rc.cpp:105 rc.cpp:120
+#, no-c-format
+msgid "Text color:"
+msgstr "Boja teksta:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:108
+#, no-c-format
+msgid "Grid color:"
+msgstr "Boja mreže:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:129
+#, no-c-format
+msgid "Log File Settings"
+msgstr "Postavke dnevničkog fajla"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:150
+#, no-c-format
+msgid "Select Font..."
+msgstr "Odaberi font..."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter"
+msgstr "Filter"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:156
+#, no-c-format
+msgid "&Add"
+msgstr "&Dodaj"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:162
+#, no-c-format
+msgid "&Change"
+msgstr "&Izmeni"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "CPU"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "Mem"
+
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "Svojstva radnog lista"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "Vrste:"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "Kolone:"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "Unesite broj vrsta koji list treba da ima."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "Unesite broj kolona koji bi radni list trebalo da ima."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "Ovde unesite naslov radnog lista."
+
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "&Igrajuće trake"
+
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
+msgstr ""
+"KSysGuard aplet ne podržava prikazivanje ove vrste senzora. Izaberite drugi "
+"senzor."
+
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr ""
+"Fajl %1 ne sadrži ispravnu definiciju apleta, koja mora imati vrstu dokumenta "
+"„KSysGuardApplet“."
+
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the KDE System Guard into this cell."
+msgstr "Dovucite senzore iz KDE System Guard-a u ovu ćeliju."
+
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "Pretraživač senzora"
+
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "Vrsta senzora"
+
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr "Dovucite senzore do praznih ćelija radnog lista ili apleta panela."
+
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they provide. "
+"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
+"display will appear that visualizes the values provided by the sensor. Some "
+"sensor displays can display values of multiple sensors. Simply drag other "
+"sensors on to the display to add more sensors."
+msgstr ""
+"Pretraživač senzora prikazuje povezane računare i njihove senzore. Kliknite i "
+"prevucite senzore do zone za njihovo ispuštanje na radnom listu. Pojaviće se "
+"prikaz koji vizuelno prikazuje vrednosti senzora. Neki od prikaza senzora mogu "
+"prikazati vrednosti više senzora. Jednostavno dovucite senzore na prikaz da "
+"biste dodali još senzora."
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr "Prevucite senzore na prazna polja radne stranice."
+
+#: ksysguard.cc:64
+msgid "KDE system guard"
+msgstr "KDE System Guard"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "KDE System Guard"
+msgstr "KDE System Guard"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "88888 Procesa"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "Memorija: 88888888888 kB iskorišćeno, 88888888888 kB slobodno"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "Swap: 888888888 kB iskorišćeno, 888888888 kB slobodno"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "&Novi radni list..."
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "Uvezi radni list..."
+
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "&Uvezi skorašnji radni list..."
+
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "U&kloni radni list"
+
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "&Izvezi radni list..."
+
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "P&oveži domaćin..."
+
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "Rask&ini vezu sa domaćinom"
+
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "Svojstva &radnog lista"
+
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "Učitaj standardne listove"
+
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "Podesi &stil..."
+
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "Da li stvarno želite da vratite podrazumevane radne listove?"
+
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "Resetuj sve radne listove"
+
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "Resetuj"
+
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr ""
+"%n proces\n"
+"%n procesa\n"
+"%n procesa"
+
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "Memorija: %1 %2 iskorišćeno, %3 %4 slobodno"
+
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "Prostor za virtuelnu memoriju nije dostupan"
+
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "Swap: %1 %2 iskorišćeno, %3 %4 slobodno"
+
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "Prikaži samo listu procesa sa lokalnog računara"
+
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "Dodatni fajlovi radnih listova za učitavanje"
+
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "© 1996-2002, razvijači KSysGuard-a"
+
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"Podrška za Solaris\n"
+"Delovi izvedeni (uz dopuštenje) iz sunos5\n"
+"modula William LeFebvre-ovog „top“ alata."