summaryrefslogtreecommitdiffstats
path: root/tde-i18n-zh_TW/messages/tdepim/kpilot.po
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-zh_TW/messages/tdepim/kpilot.po')
-rw-r--r--tde-i18n-zh_TW/messages/tdepim/kpilot.po6017
1 files changed, 6017 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/tdepim/kpilot.po b/tde-i18n-zh_TW/messages/tdepim/kpilot.po
new file mode 100644
index 00000000000..ca4792bd4b5
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdepim/kpilot.po
@@ -0,0 +1,6017 @@
+# translation of kpilot.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: kpilot\n"
+"POT-Creation-Date: 2008-07-08 01:23+0200\n"
+"PO-Revision-Date: 2007-04-18 12:36+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: lib/pilotTodoEntry.cc:133
+msgid "Completed"
+msgstr "已完成"
+
+#: lib/pilotTodoEntry.cc:135
+msgid "Not completed"
+msgstr "未完成"
+
+#: lib/pilotTodoEntry.cc:143
+#, c-format
+msgid "Due date: %1"
+msgstr "到期日:%1"
+
+#: lib/pilotTodoEntry.cc:151
+#, c-format
+msgid "Priority: %1"
+msgstr "優先等級:%1"
+
+#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+msgid "<b><em>Note:</em></b><br>"
+msgstr "<b><em>注意:</em></b><br>"
+
+#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+msgid ""
+"Note:\n"
+msgstr ""
+"注意:\n"
+
+#: lib/pilotMemo.cc:81
+msgid ""
+"<i>Title:</i> %1"
+"<br>\n"
+"<i>MemoText:</i>"
+"<br>%2"
+msgstr ""
+"<i>標題:</i>%1"
+"<br>\n"
+"<i>備忘文字:</i>"
+"<br>%2"
+
+#: lib/pilotMemo.cc:86
+msgid ""
+"Title: %1\n"
+"MemoText:\n"
+"%2"
+msgstr ""
+"標題:%1\n"
+"備忘文字:\n"
+"%2"
+
+#: kpilot/addressWidget.cc:393 lib/pilotMemo.cc:132
+msgid "[unknown]"
+msgstr "【未知】"
+
+#: lib/actionQueue.cc:136
+msgid ""
+"The connection to the handheld was lost. Synchronization cannot continue."
+msgstr "已遺失與掌上型裝置的連線。無法繼續同步。"
+
+#: lib/actions.cc:54
+msgid ""
+"KPilot %1 HotSync starting...\n"
+msgstr ""
+"KPilot %1 熱同步開始...\n"
+
+#: lib/actions.cc:56
+msgid "Using encoding %1 on the handheld."
+msgstr "在掌上型裝置使用編碼 %1。"
+
+#: lib/actions.cc:67
+msgid "KPilot is busy and cannot process the HotSync right now."
+msgstr "KPilot 忙碌中,無法即時處理熱同步。"
+
+#: lib/actions.cc:114
+msgid ""
+"Testing.\n"
+msgstr ""
+"測試中。\n"
+
+#: lib/actions.cc:130
+msgid "Syncing database %1..."
+msgstr "同步資料庫 %1..."
+
+#: kpilot/logFile.cc:97 lib/actions.cc:134
+msgid "HotSync finished."
+msgstr "熱同步已完成."
+
+#: lib/syncAction.cc:103
+msgid "The conduit %1 could not be executed."
+msgstr "導管 %1 無法被執行。"
+
+#: kpilot/conduitConfigDialog.cc:398 kpilot/kpilot.cc:261 kpilot/kpilot.cc:263
+#: kpilot/kpilot.cc:515 kpilot/kpilotConfigDialog.cc:242 lib/syncAction.cc:204
+msgid "HotSync"
+msgstr "熱同步"
+
+#: lib/syncAction.cc:205
+msgid "Full Synchronization"
+msgstr "完整同步"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 54
+#: kpilot/kpilot.cc:566 lib/syncAction.cc:206 rc.cpp:1016
+#, no-c-format
+msgid "Copy PC to Handheld"
+msgstr "從 PC 複製到掌上型裝置"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 59
+#: kpilot/kpilot.cc:557 lib/syncAction.cc:207 rc.cpp:1019
+#, no-c-format
+msgid "Copy Handheld to PC"
+msgstr "從掌上型裝置複製到 PC"
+
+#: kpilot/conduitConfigDialog.cc:397 kpilot/kpilotConfigDialog.cc:328
+#: lib/syncAction.cc:208
+msgid "Backup"
+msgstr "備份"
+
+#: lib/syncAction.cc:209
+msgid "Restore From Backup"
+msgstr "從備份還原"
+
+#: lib/syncAction.cc:220
+msgid "Test Sync"
+msgstr "測試同步"
+
+#: lib/syncAction.cc:224
+msgid "Local Sync"
+msgstr "本地端同步"
+
+#: lib/syncAction.cc:316 lib/syncAction.cc:428
+msgid "Question"
+msgstr "問題"
+
+#: lib/syncAction.cc:335 lib/syncAction.cc:448
+msgid "&Do not ask again"
+msgstr "不要再詢問我(&D)"
+
+#: lib/syncAction.cc:369 lib/syncAction.cc:481
+msgid "Do not ask again"
+msgstr "不要再詢問"
+
+#: lib/recordConduit.cc:69 lib/recordConduit.cc:289
+msgid "Unable to open the %1 database on the handheld."
+msgstr "無法在掌上型裝置開啟資料庫 %1。"
+
+#: lib/recordConduit.cc:295
+#, c-format
+msgid "Unable to open %1."
+msgstr "無法開啟 %1。"
+
+#: lib/kpilotdevicelink.cc:148
+msgid "Could not open device: %1 (will retry)"
+msgstr "無法開啟裝置:%1(會再重試)"
+
+#: lib/kpilotdevicelink.cc:187
+msgid "Trying to open device %1..."
+msgstr "試著開啟裝置 %1..."
+
+#: lib/kpilotdevicelink.cc:241
+msgid "Already listening on that device"
+msgstr "該裝置已經開始運作了"
+
+#: lib/kpilotdevicelink.cc:261
+msgid "Cannot create socket for communicating with the Pilot (%1)"
+msgstr "無法建立與 Pilot %1 連繫的 socket"
+
+#: lib/kpilotdevicelink.cc:289
+msgid "Cannot open Pilot port \"%1\". "
+msgstr "無法開啟 Pilot 連接埠 %1。"
+
+#: lib/kpilotdevicelink.cc:391
+msgid "Cannot listen on Pilot socket (%1)"
+msgstr "無法監聽 Pilot Socket(%1)"
+
+#: lib/kpilotdevicelink.cc:411 lib/kpilotdevicelink.cc:426
+msgid "Cannot accept Pilot (%1)"
+msgstr "無法接收 Pilot(%1)"
+
+#: lib/kpilotdevicelink.cc:427
+msgid "already connected"
+msgstr "已連線"
+
+#: lib/kpilotdevicelink.cc:441
+msgid "Unable to read system information from Pilot"
+msgstr "無法從 Pilot 讀取系統資訊"
+
+#: lib/kpilotdevicelink.cc:478
+msgid "Checking last PC..."
+msgstr "檢查上一個 PC..."
+
+#: lib/kpilotdevicelink.cc:487
+msgid ""
+"Could not read user information from the Pilot. Perhaps you have a password set "
+"on the device?"
+msgstr "無法從 Pilot 讀取使用者資訊。也許您在該裝置上設了密碼?"
+
+#: lib/kpilotdevicelink.cc:670
+msgid "The Pilot device is not configured yet."
+msgstr "尚未設定 Pilot 裝置。"
+
+#: lib/kpilotdevicelink.cc:709
+msgid "Pilot device %1 is not read-write."
+msgstr "無法讀寫 Pilot 裝置 %1。"
+
+#: lib/kpilotdevicelink.cc:719
+msgid ""
+"Pilot device %1 does not exist. Probably it is a USB device and will appear "
+"during a HotSync."
+msgstr "Pilot 裝置 %1 不存在。也許它是 USB 裝置,在熱同步時會出現。"
+
+#: lib/kpilotdevicelink.cc:765 lib/kpilotdevicelink.cc:774
+msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
+msgstr "<qt>無法安裝檔案 %1。</qt>"
+
+#: lib/kpilotdevicelink.cc:846
+msgid ""
+"End of HotSync\n"
+msgstr ""
+"熱同步結束\n"
+
+#: lib/pilotDateEntry.cc:179
+#, c-format
+msgid "Start date: %1"
+msgstr "開始日期:%1"
+
+#: lib/pilotDateEntry.cc:185
+msgid "Whole-day event"
+msgstr "全天事件"
+
+#: lib/pilotDateEntry.cc:193
+#, c-format
+msgid "End date: %1"
+msgstr "結束日期:%1"
+
+#: lib/pilotDateEntry.cc:200
+msgid ""
+"_: %1 is the duration, %2 is the time unit\n"
+"Alarm: %1 %2 before event starts"
+msgstr "警告:%1 %2 在事件開始之前"
+
+#: lib/pilotDateEntry.cc:204
+msgid "minutes"
+msgstr "分鐘"
+
+#: lib/pilotDateEntry.cc:205
+msgid "hours"
+msgstr "小時"
+
+#: lib/pilotDateEntry.cc:206
+msgid "days"
+msgstr "天"
+
+#: lib/pilotDateEntry.cc:216
+msgid "Recurrence: every %1 %2"
+msgstr "循環:每 %1 %2"
+
+#: lib/pilotDateEntry.cc:222
+msgid "day(s)"
+msgstr "天"
+
+#: lib/pilotDateEntry.cc:223
+msgid "week(s)"
+msgstr "週"
+
+#: lib/pilotDateEntry.cc:225
+msgid "month(s)"
+msgstr "月"
+
+#: lib/pilotDateEntry.cc:226
+msgid "year(s)"
+msgstr "年"
+
+#: lib/pilotDateEntry.cc:235
+msgid "Repeats indefinitely"
+msgstr "永遠重覆"
+
+#: lib/pilotDateEntry.cc:240
+#, c-format
+msgid "Until %1"
+msgstr "直到 %1"
+
+#: lib/pilotDateEntry.cc:244
+msgid "Repeating on the i-th day of week j"
+msgstr "在第幾週的第幾天重覆"
+
+#: lib/pilotDateEntry.cc:245
+msgid "Repeating on the n-th day of the month"
+msgstr "在一個月裡的第幾天重覆"
+
+#: lib/pilotDateEntry.cc:263
+msgid "Exceptions:"
+msgstr "例外:"
+
+#: lib/plugin.cc:73
+msgid "Unnamed"
+msgstr "未命名"
+
+#: lib/plugin.cc:93
+msgid ""
+"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save the "
+"changes before continuing?</qt>"
+msgstr "<qt>導管 %1 的設定已變更。您要儲存此變更嗎?</qt>"
+
+#: lib/plugin.cc:105
+msgid "%1 Conduit"
+msgstr "導管 %1"
+
+#: lib/plugin.cc:144
+msgid "Send questions and comments to tdepim-users@kde.org"
+msgstr "請將問題與意見送到 tdepim-users@kde.org"
+
+#: lib/plugin.cc:194
+msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
+msgstr "請將問題與意見送到 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cc:198
+msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
+msgstr "請將錯誤回報到 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cc:202
+msgid ""
+"For trademark information, see the <a href=\"help:/kpilot/trademarks.html\">"
+"KPilot User's Guide</a>."
+msgstr "關於商標資訊,請參考 <a href=\"help:/kpilot/trademarks.html\">KPilot 使用者指南</a>。"
+
+#: lib/plugin.cc:213
+msgid "<b>Authors:</b> "
+msgstr "<b>作者:</b> "
+
+#: lib/plugin.cc:234
+msgid "<b>Credits:</b> "
+msgstr "<b>致謝:</b> "
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1527
+#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:308
+msgid "Handheld"
+msgstr "掌上型裝置"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:309
+msgid "PC"
+msgstr "PC"
+
+#: lib/plugin.cc:480
+msgid "Large Changes Detected"
+msgstr "偵測到許多變更"
+
+#: lib/plugin.cc:482
+msgid ""
+"The %1 conduit has made a large number of changes to your %2. Do you want to "
+"allow this change?\n"
+"Details:\n"
+"\t%3"
+msgstr ""
+"導管 %1 做了許多變更到您的 %2。您同意此變更嗎?\n"
+"詳情:\n"
+"\t%3"
+
+#: lib/plugin.cc:536
+#, c-format
+msgid "Could not find conduit %1."
+msgstr "找不到導管 %1。"
+
+#: lib/plugin.cc:559
+#, c-format
+msgid "Could not load conduit %1."
+msgstr "無法載入導管 %1。"
+
+#: lib/plugin.cc:571
+msgid "Conduit %1 has wrong version (%2)."
+msgstr "導管 %1 的版本(%2)錯誤"
+
+#: lib/plugin.cc:581
+#, c-format
+msgid "Could not initialize conduit %1."
+msgstr "無法初始化導管 %1。"
+
+#: lib/plugin.cc:594 lib/plugin.cc:603
+#, c-format
+msgid "Could not create conduit %1."
+msgstr "無法建立導管 %1。"
+
+#: lib/plugin.cc:607
+msgid "[Conduit %1]"
+msgstr "【導管 %1】"
+
+#: lib/plugin.cc:749
+msgid "Start: %1. End: %2. "
+msgstr "開始:%1,結束:%2。"
+
+#: lib/plugin.cc:751
+msgid "%1 new. "
+msgstr "%1 新增。"
+
+#: lib/plugin.cc:752
+msgid "%1 changed. "
+msgstr "%1 已變更。"
+
+#: lib/plugin.cc:753
+msgid "%1 deleted. "
+msgstr "%1 已刪除。"
+
+#: lib/plugin.cc:755
+msgid "No changes made. "
+msgstr "沒有做任何變更。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: conduits/null/null-conduit.cc:63 conduits/null/null-factory.cc:63
+msgid "Null"
+msgstr "虛擬"
+
+#: conduits/null/null-factory.cc:65
+msgid "Null Conduit for KPilot"
+msgstr "KPilot 的虛擬導管"
+
+#: conduits/null/null-factory.cc:67
+msgid "Configures the Null Conduit for KPilot"
+msgstr "設定 KPilot 的虛擬導管(Null Conduit)"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:56
+#: conduits/abbrowserconduit/abbrowser-setup.cc:54
+#: conduits/knotes/knotes-factory.cc:73 conduits/malconduit/mal-factory.cc:76
+#: conduits/memofileconduit/memofile-factory.cc:69
+#: conduits/notepadconduit/notepad-factory.cc:73
+#: conduits/null/null-factory.cc:71 conduits/recordconduit/factory.cc:72
+#: conduits/sysinfoconduit/sysinfo-setup.cc:101
+#: conduits/timeconduit/time-setup.cc:54
+msgid "Primary Author"
+msgstr "主要作者"
+
+#: conduits/null/null-conduit.cc:81
+msgid "NULL conduit is programmed to fail."
+msgstr "寫入虛擬導管失敗。"
+
+#: conduits/memofileconduit/memofile-conduit.cc:70
+#: conduits/memofileconduit/memofile-factory.cc:61
+msgid "Memofile"
+msgstr "備忘檔"
+
+#: conduits/memofileconduit/memofile-conduit.cc:101
+msgid "Unable to open the memo databases on the handheld."
+msgstr "無法在掌上型裝置開啟備忘資料庫。"
+
+#: conduits/memofileconduit/memofile-conduit.cc:109
+msgid "Cannot initialize from pilot."
+msgstr "無法從 pilot 初始化。"
+
+#: conduits/memofileconduit/memofile-conduit.cc:116
+msgid "Cannot initialize the memo files from disk."
+msgstr "無法從磁碟初始化備忘檔。"
+
+#: conduits/memofileconduit/memofile-conduit.cc:123
+#, c-format
+msgid " Syncing with %1."
+msgstr "與 %1 同步中"
+
+#: conduits/memofileconduit/memofile-conduit.cc:126
+msgid " Copying Pilot to PC..."
+msgstr "從 Pilot 複製到 PC..."
+
+#: conduits/memofileconduit/memofile-conduit.cc:131
+msgid " Copying PC to Pilot..."
+msgstr "從 PC 複製到 Pilot..."
+
+#: conduits/memofileconduit/memofile-conduit.cc:135
+msgid " Doing regular sync..."
+msgstr "執行正規同步作業中..."
+
+#: conduits/memofileconduit/memofile-factory.cc:63
+msgid "Memofile Conduit for KPilot"
+msgstr "KPilot 備忘導管"
+
+#: conduits/memofileconduit/memofile-factory.cc:65
+msgid "Configures the Memofile Conduit for KPilot"
+msgstr "設定 KPilot 的備忘導管(Memofile Conduit)"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:52
+msgid "HardwareInfo"
+msgstr "硬體資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:53
+msgid "UserInfo"
+msgstr "使用者資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:54
+msgid "MemoryInfo"
+msgstr "記憶體資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:55
+msgid "StorageInfo"
+msgstr "儲存裝置資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:56
+msgid "DatabaseList"
+msgstr "資料庫清單"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:57
+msgid "RecordNumbers"
+msgstr "紀錄數量"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:58
+msgid "SyncInfo"
+msgstr "同步資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:59
+msgid "KDEVersion"
+msgstr "KDE 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:60
+msgid "PalmOSVersion"
+msgstr "PalmOS 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:61
+msgid "DebugInformation"
+msgstr "除錯資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:95
+msgid "KPilot System Information conduit"
+msgstr "KPilot 系統資訊導管"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:97
+msgid ""
+"Retrieves System, Hardware, and User Info from the Handheld and stores them to "
+"a file."
+msgstr "從掌上型裝置收取系統、硬體與使用者資訊,並儲存到檔案。"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:163
+#: conduits/sysinfoconduit/sysinfo-setup.cc:112
+msgid "System Information"
+msgstr "系統資訊"
+
+#: conduits/docconduit/doc-conflictdialog.cc:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:407
+msgid "unknown"
+msgstr "未知"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:254
+msgid "Password set"
+msgstr "已設定密碼"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:258
+msgid "No password set"
+msgstr "未設定密碼"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:308
+msgid "No Cards available via pilot-link"
+msgstr "無法透過 pilot-link 找到卡片"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:463
+msgid "No debug data"
+msgstr "沒有除錯資料"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:587
+msgid "Unable to open output file, using %1 instead."
+msgstr "無法開啟輸出檔,將使用 %1 取代。"
+
+#: conduits/notepadconduit/notepad-conduit.cc:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:591
+#, c-format
+msgid "Unable to open %1"
+msgstr "無法開啟 %1"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:602
+#, c-format
+msgid "Handheld system information written to the file %1"
+msgstr "寫入檔案 %1 的掌上型裝置系統資訊"
+
+#: conduits/malconduit/mal-conduit.cc:121 conduits/malconduit/mal-setup.cc:62
+msgid "MAL"
+msgstr "MAL"
+
+#: conduits/malconduit/mal-conduit.cc:193
+msgid ""
+"Skipping MAL sync, because last synchronization was not long enough ago."
+msgstr "略過 MAL 同步,因為離上次同步還不夠久。"
+
+#: conduits/malconduit/mal-conduit.cc:202
+msgid "MAL synchronization failed (no SyncInfo)."
+msgstr "MAL 同步失敗(沒有同步資訊)。"
+
+#: conduits/malconduit/mal-conduit.cc:217
+msgid "No proxy server is set."
+msgstr "沒有設定代理伺服器。"
+
+#: conduits/malconduit/mal-conduit.cc:220
+#, c-format
+msgid "Using proxy server: %1"
+msgstr "使用代理伺服器:%1"
+
+#: conduits/malconduit/mal-conduit.cc:259
+msgid "No SOCKS proxy is set."
+msgstr "沒有設定 SOCKS 代理伺服器。"
+
+#: conduits/malconduit/mal-conduit.cc:262
+#, c-format
+msgid "Using SOCKS proxy: %1"
+msgstr "使用 SOCKS 代理伺服器:%1"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:50
+#: conduits/malconduit/mal-factory.cc:70
+msgid "MAL Synchronization Conduit for KPilot"
+msgstr "KPilot MAL 同步導管"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:52
+#: conduits/malconduit/mal-factory.cc:72
+msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
+msgstr "將 MAL 伺服器(如 AvantGo)上的內容同步到掌上型裝置"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:58
+#: conduits/malconduit/mal-factory.cc:78
+msgid "Author of libmal and the JPilot AvantGo conduit"
+msgstr "libmal 與 JPilot AvantGo 導管的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:60
+#: conduits/malconduit/mal-factory.cc:80
+msgid "Author of syncmal"
+msgstr "syncmal 的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:62
+#: conduits/malconduit/mal-factory.cc:82
+msgid "Authors of the malsync library (c) 1997-1999"
+msgstr "malsync 函式庫 (c) 1997-1999 的作者"
+
+#: conduits/knotes/knotes-factory.cc:67
+msgid "KNotes Conduit for KPilot"
+msgstr "KPilot 的 KNotes 導管"
+
+#: conduits/knotes/knotes-factory.cc:69
+msgid "Configures the KNotes Conduit for KPilot"
+msgstr "設定 KPilot 的 KNotes 導管(KNotes Conduit)"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:61
+#: conduits/knotes/knotes-factory.cc:77
+msgid "UI"
+msgstr "使用者介面"
+
+#: conduits/knotes/knotes-action.cc:232
+msgid "Could not open MemoDB on the handheld."
+msgstr "無法開啟掌上型裝置的備忘錄資料庫。"
+
+#: conduits/knotes/knotes-action.cc:272
+#, c-format
+msgid "Could not load the resource at: %1"
+msgstr "無法載入在 %1 的資源。"
+
+#: conduits/knotes/knotes-action.cc:808
+#, c-format
+msgid ""
+"_n: Added one new memo.\n"
+"Added %n new memos."
+msgstr "已新增 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cc:814
+#, c-format
+msgid ""
+"_n: Modified one memo.\n"
+"Modified %n memos."
+msgstr "已變更 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cc:821
+#, c-format
+msgid ""
+"_n: Deleted one memo.\n"
+"Deleted %n memos."
+msgstr "已刪除 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cc:827
+#, c-format
+msgid ""
+"_n: Added one note to KNotes.\n"
+"Added %n notes to KNotes."
+msgstr "已新增 %n 張便條到 KNotes。"
+
+#: conduits/knotes/knotes-action.cc:833
+#, c-format
+msgid ""
+"_n: Modified one note in KNotes.\n"
+"Modified %n notes in KNotes."
+msgstr "已變更 KNotes 中的 %n 張便條。"
+
+#: conduits/knotes/knotes-action.cc:839
+#, c-format
+msgid ""
+"_n: Deleted one note from KNotes.\n"
+"Deleted %n notes from KNotes."
+msgstr "已刪除 KNotes 中的 %n 張便條。"
+
+#: conduits/knotes/knotes-action.cc:844
+msgid "No change to KNotes."
+msgstr "未改變 KNotes。"
+
+#: conduits/knotes/knotes-setup.cc:59
+msgid "KNotes"
+msgstr "KNotes"
+
+#: conduits/timeconduit/time-conduit.cc:57
+#: conduits/timeconduit/time-setup.cc:68 kpilot/datebookWidget.cc:68
+msgid "Time"
+msgstr "時間"
+
+#: conduits/timeconduit/time-conduit.cc:91
+msgid "Setting the clock on the handheld"
+msgstr "設定掌上型裝置的時間"
+
+#: conduits/timeconduit/time-conduit.cc:108
+msgid ""
+"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the time "
+"conduit..."
+msgstr "PalmOS 3.25 與 3.3 版不支援設定系統時間。將忽略時間導管..."
+
+#: conduits/timeconduit/time-setup.cc:48
+msgid "Time Synchronization Conduit for KPilot"
+msgstr "KPilot 的時間同步導管"
+
+#: conduits/timeconduit/time-setup.cc:50
+msgid "Synchronizes the Time on the Handheld and the PC"
+msgstr "將掌上型裝置與 PC 上的時間做同步"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:48
+msgid "Abbrowser Conduit for KPilot"
+msgstr "KPilot 的 Abbrowser 導管"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:50
+msgid "Configures the Abbrowser Conduit for KPilot"
+msgstr "設定 KPilot 的 Abbrowser 導管(Abbrowser Conduit)"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:56
+#: conduits/abbrowserconduit/abbrowser-setup.cc:59
+#: conduits/docconduit/doc-factory.cc:68 conduits/popmail/setupDialog.cc:74
+#: conduits/vcalconduit/todo-setup.cc:59 conduits/vcalconduit/todo-setup.cc:63
+#: conduits/vcalconduit/vcal-setup.cc:50 conduits/vcalconduit/vcal-setup.cc:54
+#: kpilot/kpilot.cc:1027 kpilot/pilotDaemon.cc:1323
+msgid "Maintainer"
+msgstr "維護者"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:125
+#: conduits/abbrowserconduit/abbrowser-setup.cc:71
+msgid "Addressbook"
+msgstr "通訊錄"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:291
+#: conduits/vcalconduit/vcal-conduitbase.cc:298
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened. Please make "
+"sure to supply a valid file name in the conduit's configuration dialog. "
+"Aborting the conduit."
+msgstr "您選擇與檔案 %1 同步,但是檔案無法開啟。請確定您在導管設定中所給的是正確的檔名。將中止此導管。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:328
+msgid "Unable to initialize and load the addressbook for the sync."
+msgstr "同步時無法初始化並載入通訊錄。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:341
+msgid "Unable to lock addressbook for writing. Can't sync!"
+msgstr "寫入時無法鎖定通訊錄。無法同步!"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:396
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the temporary "
+"local file \"%2\" manually"
+msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:518
+msgid "Unable to open the addressbook databases on the handheld."
+msgstr "無法開啟掌上型裝置上的通訊錄資料庫。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:539
+msgid "Unable to open the addressbook."
+msgstr "無法開啟通訊錄。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1526
+msgid "Item on PC"
+msgstr "PC 上的項目"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1528
+msgid "Last sync"
+msgstr "最後一次同步"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1549
+msgid "Last name"
+msgstr "姓"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1550
+msgid "First name"
+msgstr "名"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1551
+msgid "Organization"
+msgstr "組織"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1552
+msgid "Title"
+msgstr "標題"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1553
+msgid "Note"
+msgstr "附註"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1555
+msgid "Custom 1"
+msgstr "自訂 1"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1556
+msgid "Custom 2"
+msgstr "自訂 2"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1557
+msgid "Custom 3"
+msgstr "自訂 3"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1558
+msgid "Custom 4"
+msgstr "自訂 4"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1560
+msgid "Work Phone"
+msgstr "工作電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1561
+msgid "Home Phone"
+msgstr "住家電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1562
+msgid "Mobile Phone"
+msgstr "行動電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1563
+msgid "Fax"
+msgstr "傳真"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1564
+msgid "Pager"
+msgstr "呼叫器"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1565
+msgid "Other"
+msgstr "其他"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1566
+msgid "Email"
+msgstr "電子郵件地址"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1569
+msgid "Address"
+msgstr "地址"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1570
+msgid "City"
+msgstr "城市"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1571
+msgid "Region"
+msgstr "區域"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1572
+msgid "Postal code"
+msgstr "郵遞區號"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1573
+msgid "Country"
+msgstr "國家"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1587 kpilot/listCat.cc:84
+msgid "Category"
+msgstr "類別"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1752
+msgid ""
+"The following address entry was changed, but does no longer exist on the "
+"handheld. Please resolve this conflict:"
+msgstr "底下的通訊錄項目已變更,但是掌上型裝置中已不存在。請先解決這個問題:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1756
+msgid ""
+"The following address entry was changed, but does no longer exist on the PC. "
+"Please resolve this conflict:"
+msgstr "底下的通訊錄項目已變更,但是 PC 中已不存在。請先解決這個問題:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1760
+msgid ""
+"The following address entry was changed on the handheld as well as on the PC "
+"side. The changes could not be merged automatically, so please resolve the "
+"conflict yourself:"
+msgstr "底下的通訊錄項目已同時在 PC 與掌上型裝置中變更,但是兩者的變更無法自動合併。請先解決這個問題:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1762
+msgid "Address conflict"
+msgstr "通訊錄項目衝突"
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:162
+msgid ""
+"_: Entries in the resolution dialog. First the name of the field, then the "
+"entry from the Handheld or PC after the colon\n"
+"%1: %2"
+msgstr "%1:%2"
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:164
+msgid ""
+"_: Denoting newlines in Address entries. No need to translate\n"
+" | "
+msgstr " | "
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:214
+#: conduits/abbrowserconduit/resolutionDialog.cc:220
+msgid "Delete entry"
+msgstr "刪除項目"
+
+#: conduits/docconduit/DOC-converter.cc:198
+msgid "Unable to open text file %1 for reading."
+msgstr "無法開啟文字檔 %1 以讀取。"
+
+#: conduits/docconduit/DOC-converter.cc:383
+msgid "Unable to open Database for writing"
+msgstr "無法開啟資料庫以寫入"
+
+#: conduits/docconduit/DOC-converter.cc:440
+#, c-format
+msgid "Unable to open palm doc database %1"
+msgstr "無法開啟 palm doc 資料庫 %1"
+
+#: conduits/docconduit/DOC-converter.cc:510
+msgid "No filename set for the conversion"
+msgstr "轉換時未設定檔案名稱"
+
+#: conduits/docconduit/DOC-converter.cc:515
+msgid "Unable to open Database for reading"
+msgstr "無法開啟資料庫以讀取"
+
+#: conduits/docconduit/DOC-converter.cc:523
+#, c-format
+msgid "Unable to read database header for database %1."
+msgstr "無法讀取資料庫 %1 的資料庫標頭。"
+
+#: conduits/docconduit/DOC-converter.cc:543
+#, c-format
+msgid "Unable to open output file %1."
+msgstr "無法開啟輸出檔 %1。"
+
+#: conduits/docconduit/DOC-converter.cc:558
+msgid "Could not read text record #%1 from Database %2"
+msgstr "無法從資料庫 %2 讀取文字紀錄 #%1"
+
+#: conduits/docconduit/DOC-converter.cc:577
+msgid "Could not read bookmark record #%1 from Database %2"
+msgstr "無法從資料庫 %2 讀取書籤紀錄 #%1"
+
+#: conduits/docconduit/DOC-converter.cc:594
+msgid "Unable to open file %1 for the bookmarks of %2."
+msgstr "無法為 %2 的書籤開啟檔案 %1。"
+
+#: conduits/docconduit/doc-conduit.cc:84
+msgid "DOC"
+msgstr "DOC"
+
+#: conduits/docconduit/doc-conduit.cc:272
+msgid "Searching for texts and databases to synchronize"
+msgstr "搜尋要同步的文字與資料庫"
+
+#: conduits/docconduit/doc-conduit.cc:332
+msgid "Database created."
+msgstr "資料庫已建立。"
+
+#: conduits/docconduit/doc-conduit.cc:380
+msgid "Unable to install the locally created PalmDOC %1 to the handheld."
+msgstr "無法安裝本地端建立的 PalmDOC %1 到掌上型裝置。"
+
+#: conduits/docconduit/doc-conduit.cc:383
+msgid "Conversion of PalmDOC \"%1\" failed."
+msgstr "轉換 PalmDOC %1 失敗。"
+
+#: conduits/docconduit/doc-conduit.cc:391
+#, c-format
+msgid "Unable to open or create the database %1."
+msgstr "無法開啟或建立資料庫 %1。"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 147
+#: conduits/docconduit/doc-conduit.cc:625 rc.cpp:334 rc.cpp:706
+#, no-c-format
+msgid "Conflict Resolution"
+msgstr "解決衝突"
+
+#: conduits/docconduit/doc-conduit.cc:630
+msgid "Sync aborted by user."
+msgstr "使用者已取消同步。"
+
+#: conduits/docconduit/doc-conduit.cc:668
+msgid "Synchronizing text \"%1\""
+msgstr "同步文字 %1 中"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:176
+#: conduits/docconduit/kpalmdoc_dlg.cc:212
+#: conduits/docconduit/kpalmdoc_dlg.cc:325
+#: conduits/docconduit/kpalmdoc_dlg.cc:350
+msgid ""
+"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
+"<br>Use folder <em>%2</em> instead?</qt>"
+msgstr "<qt>您選擇要同步資料夾,但是給了一個檔案(<em>%1</em>)。<br> 要改用資料夾 <em>%2</em> 嗎?</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:179
+#: conduits/docconduit/kpalmdoc_dlg.cc:215
+#: conduits/docconduit/kpalmdoc_dlg.cc:328
+#: conduits/docconduit/kpalmdoc_dlg.cc:354
+msgid "Use Folder"
+msgstr "使用資料夾"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:192
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"folder.</qt>"
+msgstr "<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:201
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"directory.</qt>"
+msgstr "<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的目錄。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:229
+msgid ""
+"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
+msgstr "<qt>無法建立文字檔使用的資料夾 <em>%1</em>。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:252
+#: conduits/docconduit/kpalmdoc_dlg.cc:390
+msgid "The following texts were successfully converted:"
+msgstr "底下的文字已成功轉換:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:253
+#: conduits/docconduit/kpalmdoc_dlg.cc:391
+msgid "Conversion Successful"
+msgstr "轉換成功"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:257
+#: conduits/docconduit/kpalmdoc_dlg.cc:395
+msgid "No text files were converted correctly"
+msgstr "沒有正確轉換任何文字檔"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:267
+#: conduits/docconduit/kpalmdoc_dlg.cc:405
+msgid "<qt>The file <em>%1</em> does not exist.</qt>"
+msgstr "<qt>檔案 <em>%1</em> 不存在。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:283
+#: conduits/docconduit/kpalmdoc_dlg.cc:413
+msgid "Conversion of file %1 successful."
+msgstr "檔案 %1 轉換成功。"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:340
+msgid ""
+"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
+msgstr "<qt>文字檔使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:367
+msgid ""
+"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
+msgstr "<qt>無法建立 PalmDOC 檔使用的資料夾 <em>%1</em>。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:435
+msgid "&Text folder:"
+msgstr "文字資料夾(&T):"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:436
+msgid "&PalmDOC folder:"
+msgstr "PalmDOC 資料夾(&P):"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 66
+#: conduits/docconduit/kpalmdoc_dlg.cc:440 rc.cpp:751
+#, no-c-format
+msgid "&Text file:"
+msgstr "文字檔(&T):"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:441
+msgid "&DOC file:"
+msgstr "DOC 檔案(&D):"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:456
+msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr "<qt>資料庫檔案 <em>%1</em> 已存在。要覆寫嗎?</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:457
+#: conduits/docconduit/kpalmdoc_dlg.cc:502 kpilot/addressWidget.cc:698
+#: kpilot/logWidget.cc:356
+msgid "Overwrite"
+msgstr "覆寫"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:482
+#: conduits/docconduit/kpalmdoc_dlg.cc:518
+msgid "<qt>Error while converting the text %1.</qt>"
+msgstr "<qt>轉換文字 %1 時發生錯誤。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:501
+msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr "<qt>文字檔案 <em>%1</em> 已存在。要覆寫嗎?</qt>"
+
+#: conduits/docconduit/doc-factory.cc:63
+msgid "Palm DOC Conduit for KPilot"
+msgstr "KPilot 的 Palm DOC 導管"
+
+#: conduits/docconduit/doc-factory.cc:64
+msgid "Configures the DOC Conduit for KPilot"
+msgstr "設定 KPilot 的 Palm DOC 導管"
+
+#: conduits/docconduit/doc-setup.cc:64
+msgid "Palm DOC"
+msgstr "Palm DOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:42
+msgid "KPalmDOC"
+msgstr "KPalmDOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:45
+msgid "Main Developer"
+msgstr "主要開發者"
+
+#: conduits/docconduit/kpalmdoc.cpp:47
+msgid "Maintainer of KPilot"
+msgstr "KPilot 維護者"
+
+#: conduits/docconduit/kpalmdoc.cpp:54
+msgid "PalmDOC Converter"
+msgstr "PalmDOC 轉換器"
+
+#: conduits/docconduit/doc-conflictdialog.cc:53
+msgid ""
+"Here is a list of all text files and DOC databases the conduit found. The "
+"conduit tried to determine the correct sync direction, but for databases in "
+"bold red letters a conflict occurred (i.e. the text was changed both on the "
+"desktop and on the handheld). For these databases please specify which version "
+"is the current one."
+msgstr ""
+"這裡是導管所找到的所有文字檔與 DOC "
+"資料庫的清單。導管曾經試著決定正確的同步方向,但是以粗紅字母標出的資料庫中出現衝突(也就是文字內容在兩邊都做了變更)。請指定這些發生衝突的資料庫,要以哪個版本為"
+"主。"
+
+#: conduits/docconduit/doc-conflictdialog.cc:57
+msgid ""
+"You can also change the sync direction for databases without a conflict."
+msgstr "您也可以對未發生衝突的資料庫來改變同步的方向。"
+
+#: conduits/docconduit/doc-conflictdialog.cc:61
+msgid "DOC Databases"
+msgstr "DOC 資料庫"
+
+#: conduits/docconduit/doc-conflictdialog.cc:106
+msgid "No Sync"
+msgstr "未同步"
+
+#: conduits/docconduit/doc-conflictdialog.cc:107
+msgid "Sync Handheld to PC"
+msgstr "從掌上型裝置同步到 PC"
+
+#: conduits/docconduit/doc-conflictdialog.cc:108
+msgid "Sync PC to Handheld"
+msgstr "從 PC 同步到掌上型裝置"
+
+#: conduits/docconduit/doc-conflictdialog.cc:109
+msgid "Delete Both Databases"
+msgstr "刪除兩邊的資料庫"
+
+#: conduits/docconduit/doc-conflictdialog.cc:113
+msgid "More Info..."
+msgstr "更多資訊..."
+
+#: conduits/docconduit/doc-conflictdialog.cc:155
+msgid "unchanged"
+msgstr "未變更"
+
+#: conduits/docconduit/doc-conflictdialog.cc:156
+msgid "new"
+msgstr "新的"
+
+#: conduits/docconduit/doc-conflictdialog.cc:157
+msgid "changed"
+msgstr "已變更"
+
+#: conduits/docconduit/doc-conflictdialog.cc:158
+msgid "only bookmarks changed"
+msgstr "只變更書籤"
+
+#: conduits/docconduit/doc-conflictdialog.cc:159
+msgid "deleted"
+msgstr "已刪除"
+
+#: conduits/docconduit/doc-conflictdialog.cc:160
+msgid "does not exist"
+msgstr "不存在"
+
+#: conduits/docconduit/doc-conflictdialog.cc:171
+msgid ""
+"Status of the database %1:\n"
+"\n"
+msgstr ""
+"資料庫 %1 的狀態:\n"
+"\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:172
+msgid ""
+"Handheld: %1\n"
+msgstr ""
+"掌上型裝置:%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:173
+msgid ""
+"Desktop: %1\n"
+msgstr ""
+"桌面:%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:175
+msgid "Database information"
+msgstr "資料庫資訊"
+
+#: conduits/notepadconduit/notepad-conduit.cc:59
+#: conduits/notepadconduit/notepad-factory.cc:89
+msgid "Notepad"
+msgstr "記事本"
+
+#: conduits/notepadconduit/notepad-conduit.cc:105
+#, c-format
+msgid ""
+"_n: 1 notepad could not be saved\n"
+"%n notepads could not be saved"
+msgstr "無法儲存 %n 個記事本"
+
+#: conduits/notepadconduit/notepad-conduit.cc:106
+#, c-format
+msgid ""
+"_n: 1 notepad saved\n"
+"%n notepads saved"
+msgstr "已儲存 %n 個記事本"
+
+#: conduits/notepadconduit/notepad-factory.cc:67
+msgid "Saves notepads to png files"
+msgstr "將記事本存成 png 檔"
+
+#: conduits/notepadconduit/notepad-factory.cc:69
+msgid "Configures the Notepad Conduit for KPilot"
+msgstr "設定 KPilot 的記事本導管(Notepad Conduit)"
+
+#: conduits/notepadconduit/notepad-factory.cc:78
+msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
+msgstr "記事本導管是以 Angus 的 read-notepad 為基礎開發出來的。它是 pilot-link 的一部份"
+
+#: conduits/recordconduit/factory.cc:64
+msgid "Record Conduit"
+msgstr "紀錄導管"
+
+#: conduits/recordconduit/factory.cc:66
+msgid "Record Conduit for KPilot"
+msgstr "KPilot 的紀錄導管"
+
+#: conduits/recordconduit/factory.cc:68
+msgid "Configures the Record Conduit for KPilot"
+msgstr "設定 KPilot 的紀錄導管(Record Conduit)"
+
+#: conduits/popmail/popmail-conduit.cc:89 conduits/popmail/setupDialog.cc:66
+msgid "KMail"
+msgstr "KMail"
+
+#: conduits/popmail/setupDialog.cc:68
+msgid "Mail Conduit for KPilot"
+msgstr "KPilot 的 Mail 導管"
+
+#: conduits/popmail/setupDialog.cc:70
+msgid "Configures the Mail Conduit for KPilot"
+msgstr "設定 KPilot 的 Mail 導管(Mail Conduit)"
+
+#: conduits/popmail/setupDialog.cc:78 conduits/vcalconduit/todo-setup.cc:53
+#: conduits/vcalconduit/todo-setup.cc:55 conduits/vcalconduit/todo-setup.cc:57
+#: conduits/vcalconduit/vcal-setup.cc:58 conduits/vcalconduit/vcal-setup.cc:60
+#: conduits/vcalconduit/vcal-setup.cc:62
+msgid "Original Author"
+msgstr "原始作者"
+
+#: conduits/popmail/setupDialog.cc:80
+msgid "POP3 code"
+msgstr "POP3 程式碼"
+
+#: conduits/popmail/setupDialog.cc:82
+msgid "SMTP support and redesign"
+msgstr "SMTP 支援與重新設計"
+
+#: conduits/popmail/popmail-conduit.cc:118
+#, c-format
+msgid ""
+"_n: Sent one message\n"
+"Sent %n messages"
+msgstr "已傳送 %n 封信件"
+
+#: conduits/popmail/popmail-conduit.cc:138
+msgid "No mail was sent."
+msgstr "沒有送出任何信件"
+
+#: conduits/popmail/popmail-conduit.cc:145
+msgid "No mail could be sent."
+msgstr "沒有可傳送的信件。"
+
+#: conduits/popmail/popmail-conduit.cc:195
+msgid "Could not connect to DCOP server for the KMail connection."
+msgstr "無法連接 DCOP 伺服器以建立與 KMail 的連線。"
+
+#: conduits/popmail/popmail-conduit.cc:197
+#: conduits/popmail/popmail-conduit.cc:232
+#: conduits/popmail/popmail-conduit.cc:245
+#: conduits/popmail/popmail-conduit.cc:273
+msgid "Error Sending Mail"
+msgstr "傳送郵件時發生錯誤"
+
+#: conduits/popmail/popmail-conduit.cc:230
+#: conduits/popmail/popmail-conduit.cc:243
+msgid "Cannot open temporary file to store mail from Pilot in."
+msgstr "無法開啟暫存檔以傳送從 Pilot 送來的信件。"
+
+#: conduits/popmail/popmail-conduit.cc:272
+msgid "DCOP connection with KMail failed."
+msgstr "與 KMail 的 DCOP 連線失敗。"
+
+#: conduits/popmail/popmail-conduit.cc:397
+msgid "Cannot perform backup of mail database"
+msgstr "無法備份信件資料庫"
+
+#: conduits/popmail/popmail-conduit.cc:405
+msgid "Unable to open mail database on handheld"
+msgstr "無法在掌上型裝置上開啟信件資料庫"
+
+#: conduits/vcalconduit/vcal-conduit.cc:178
+#: conduits/vcalconduit/vcal-setup.cc:70
+msgid "Calendar"
+msgstr "行事曆"
+
+#: conduits/vcalconduit/vcal-conduit.cc:222
+msgid ""
+"Event \"%1\" has a yearly recurrence other than by month, will change this to "
+"recurrence by month on handheld."
+msgstr "事件 %1 設定為年度循環,而不是月份循環。在掌上型裝置將改為月份循環。"
+
+#: conduits/vcalconduit/vcal-setup.cc:44
+msgid "VCal Conduit for KPilot"
+msgstr "KPilot 的 VCal 導管"
+
+#: conduits/vcalconduit/vcal-setup.cc:46
+msgid "Configures the VCal Conduit for KPilot"
+msgstr "設定 KPilot 的 VCal 導管(VCal Conduit)"
+
+#: conduits/vcalconduit/vcal-setup.cc:64
+msgid "iCalendar port"
+msgstr "iCalendar 移植"
+
+#: conduits/vcalconduit/vcal-setup.cc:66 kpilot/kpilot.cc:1038
+#: kpilot/kpilot.cc:1039
+msgid "Bugfixer"
+msgstr "修正錯誤"
+
+#: conduits/vcalconduit/vcal-setup.cc:69
+msgid "Calendar Destination"
+msgstr "行事曆目的地"
+
+#: conduits/vcalconduit/cleanupstate.cc:62
+msgid "Cleaning up ..."
+msgstr "清除中..."
+
+#: conduits/vcalconduit/cleanupstate.cc:91
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the temporary "
+"local file \"%2\" manually."
+msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
+
+#: conduits/vcalconduit/todo-conduit.cc:183
+#: conduits/vcalconduit/todo-setup.cc:45
+msgid "To-do"
+msgstr "待辦事項"
+
+#: conduits/vcalconduit/pctohhstate.cc:71
+msgid "Copying records to Pilot ..."
+msgstr "複製紀錄到 Pilot..."
+
+#: conduits/vcalconduit/initstate.cc:59
+msgid "Initializing conduit ..."
+msgstr "初始化導管中..."
+
+#: conduits/vcalconduit/todo-setup.cc:47
+msgid "To-do Conduit for KPilot"
+msgstr "KPilot 的待辦事項導管"
+
+#: conduits/vcalconduit/todo-setup.cc:49
+msgid "Configures the To-do Conduit for KPilot"
+msgstr "設定 KPilot 的待辦事項導管(To-do Conduit)"
+
+#: conduits/vcalconduit/todo-setup.cc:69
+msgid "To-do Destination"
+msgstr "待辦事項目的地"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:183
+msgid "Could not open the calendar databases."
+msgstr "無法開啟行事曆資料庫。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:269
+msgid ""
+"You selected to sync with an iCalendar file, but did not give a filename. "
+"Please select a valid file name in the conduit's configuration dialog"
+msgstr "您選擇要與 iCalendar 檔案同步,但是未指定檔案名稱。請在導管設定對話框中選擇一個合法檔案。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:291
+#: conduits/vcalconduit/vcal-conduitbase.cc:356
+#, c-format
+msgid "Using local time zone: %1"
+msgstr "使用本地端時區 %1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:292
+#: conduits/vcalconduit/vcal-conduitbase.cc:357
+#, c-format
+msgid "Using non-local time zone: %1"
+msgstr "使用非本地端時區 %1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:321
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened or created. "
+"Please make sure to supply a valid file name in the conduit's configuration "
+"dialog. Aborting the conduit."
+msgstr "您選擇與檔案 %1 同步,但是檔案無法開啟或建立。請確定您在導管設定中所給的是正確的檔名。將中止此導管。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:330
+msgid "Syncing with file \"%1\""
+msgstr "與檔案 %1 同步中"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:354
+msgid "Syncing with standard calendar resource."
+msgstr "與標準行事曆資源同步。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:367
+msgid ""
+"Unable to initialize the calendar object. Please check the conduit's setup"
+msgstr "無法初始化行事曆物件。請檢查導管設定。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:425
+msgid ""
+"The following item was modified both on the Handheld and on your PC:\n"
+"PC entry:\n"
+"\t"
+msgstr ""
+"以下的項目在掌上型裝置與 PC 中都已修改:\n"
+"PC 項目:\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:428
+msgid ""
+"\n"
+"Handheld entry:\n"
+"\t"
+msgstr ""
+"\n"
+"掌上型裝置項目:\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:430
+msgid ""
+"\n"
+"\n"
+"Which entry do you want to keep? It will overwrite the other entry."
+msgstr ""
+"\n"
+"\n"
+"您要保存哪個項目?另一個會被覆寫掉。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:435
+msgid "Conflicting Entries"
+msgstr "衝突的項目"
+
+#: kpilot/conduitConfigDialog.cc:252
+msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
+msgstr "<qt>此導管似乎已損毀而無法設定。</qt>"
+
+#: kpilot/conduitConfigDialog.cc:260
+msgid "<qt>This is an old-style conduit.</qt>"
+msgstr "<qt>這是舊式的導管。</qt>"
+
+#: kpilot/conduitConfigDialog.cc:264
+msgid "Configure..."
+msgstr "設定..."
+
+#: kpilot/conduitConfigDialog.cc:274
+msgid ""
+"<qt><i>Conduits</i> are external (possibly third-party) programs that perform "
+"synchronization actions. They may have individual configurations. Select a "
+"conduit to configure it, and enable it by clicking on its checkbox. </qt>"
+msgstr ""
+"<qt>所謂的導管(<i>Conduits</i>)是外部程式(有可能是第三者提供的),用以執行同步動作。每個導管都可能有自己的設定。請選擇一個導管,設定好後勾"
+"選就可以開始使用。</qt>"
+
+#: kpilot/conduitConfigDialog.cc:282
+msgid ""
+"<qt>"
+"<p>The <i>general</i> portion of KPilot's setup contains settings for your "
+"hardware and the way KPilot should display your data. For the basic setup, "
+"which should fulfill the need of most users, just use the setup wizard "
+"below.</p>If you need some special settings, this dialog provides all the "
+"options for fine-tuning KPilot. But be warned: The HotSync settings are various "
+"esoteric things.</p>"
+"<p>You can enable an action or conduit by clicking on its checkbox. Checked "
+"conduits will be run during a HotSync. Select a conduit to configure it.</p>"
+"</qt>"
+msgstr ""
+"<qt>"
+"<p>KPilot 設定中的「一般」設定包括了您的硬體,以及 KPilot 顯示您的資料的方法設定。要做基本設定,您可以用底下的組態精靈。</p> "
+"<p>如果您需要做一些特殊設定,此對話框提供了微調 KPilot "
+"所需的所有選項。不過請小心:熱同步(HotSync)設定裡多半是一些有經驗的人才懂的設定。</p> "
+"<p>您可以勾選以開啟一個動作或導管。所選取的導管會在熱同步時執行。選擇一個導管以設定。</p></qt>"
+
+#: kpilot/conduitConfigDialog.cc:295
+msgid "Configuration Wizard"
+msgstr "組態精靈"
+
+#: kpilot/conduitConfigDialog.cc:369
+msgid "About KPilot. Credits."
+msgstr "關於 KPilot。致謝。"
+
+#: kpilot/conduitConfigDialog.cc:372
+msgid "Conduits"
+msgstr "導管"
+
+#: kpilot/conduitConfigDialog.cc:374
+msgid "General Setup"
+msgstr "一般設定"
+
+#: kpilot/conduitConfigDialog.cc:382
+msgid "General setup of KPilot (User name, port, general sync settings)"
+msgstr "KPilot 的一般設定(使用者名稱、連接埠、通用同步設定等)"
+
+#: kpilot/conduitConfigDialog.cc:384
+msgid "Actions for HotSync with individual configuration."
+msgstr "熱同步動作的個別設定。"
+
+#: kpilot/conduitConfigDialog.cc:395 kpilot/kpilotConfigDialog.cc:470
+msgid "Startup and Exit"
+msgstr "啟動與離開"
+
+#: kpilot/conduitConfigDialog.cc:395
+msgid "Behavior at startup and exit."
+msgstr "啟動與離開的行為。"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 33
+#: kpilot/conduitConfigDialog.cc:396 kpilot/kpilotConfigDialog.cc:418
+#: rc.cpp:1223
+#, no-c-format
+msgid "Viewers"
+msgstr "檢視器"
+
+#: kpilot/conduitConfigDialog.cc:396
+msgid "Viewer settings."
+msgstr "檢視器設定。"
+
+#: kpilot/conduitConfigDialog.cc:397
+msgid "Special settings for backup."
+msgstr "備份的特別設定。"
+
+#: kpilot/conduitConfigDialog.cc:398
+msgid "Special behavior during HotSync."
+msgstr "熱同步期間的特別行為設定。"
+
+#: kpilot/conduitConfigDialog.cc:399 kpilot/kpilotConfigDialog.cc:102
+msgid "Device"
+msgstr "裝置"
+
+#: kpilot/conduitConfigDialog.cc:399
+msgid "Hardware settings and startup and exit options."
+msgstr "硬體設定,以及啟動與離開的選項。"
+
+#: kpilot/conduitConfigDialog.cc:542
+msgid ""
+"<qt>This is an internal action which has no configuration options. The action's "
+"description is: <i>%1</i> </qt>"
+msgstr "<qt>這是沒有設定選項的內部動作。動作的描述為:<i>%1</i>。</qt>"
+
+#: kpilot/conduitConfigDialog.cc:722
+msgid "KPilot Setup"
+msgstr "KPilot 設定"
+
+#: kpilot/conduitConfigDialog.cc:735
+msgid ""
+"<qt>No library could be found for the conduit %1. This means that the conduit "
+"was not installed properly.</qt>"
+msgstr "<qt>找不到導管 %1 所需的函式庫。這表示導管沒有正確安裝。</qt>"
+
+#: kpilot/conduitConfigDialog.cc:745 kpilot/conduitConfigDialog.cc:762
+msgid "Conduit Error"
+msgstr "導管錯誤"
+
+#: kpilot/conduitConfigDialog.cc:752
+msgid ""
+"<qt>There was a problem loading the library for the conduit %1. This means that "
+"the conduit was not installed properly.</qt>"
+msgstr "<qt>載入導管 %1 的函式庫時發生問題。這表示導管沒有正確安裝。</qt>"
+
+#: kpilot/dbSelectionDialog.cc:108
+msgid ""
+"This is a database that exists on the device. It was not added manually, so it "
+"can not removed from the list."
+msgstr "這是裝置上的資料庫。它不是手動新增的,所以也無法從清單中移除。"
+
+#: kpilot/dbSelectionDialog.cc:108
+msgid "Database on Device"
+msgstr "裝置上的資料庫"
+
+#: kpilot/dbSelectionDialog.cc:119
+msgid "You need to select a database to delete in the list."
+msgstr "您需要選取資料庫以從清單上刪除。"
+
+#: kpilot/dbSelectionDialog.cc:119
+msgid "No Database Selected"
+msgstr "沒有選取資料庫"
+
+#: kpilot/kpilotConfigWizard.cc:62
+msgid "Pilot Info"
+msgstr "Pilot 資訊"
+
+#: kpilot/kpilotConfigWizard.cc:64
+msgid "Application to Sync With"
+msgstr "要同步的應用程式"
+
+#: kpilot/kpilotConfigWizard.cc:127
+msgid "general KDE-PIM"
+msgstr "一般 KDE 個人資訊管理"
+
+#: kpilot/kpilotConfigWizard.cc:133
+msgid ""
+"_: Gnome's PIM suite\n"
+"Evolution"
+msgstr "Evolution"
+
+#: kpilot/kpilotConfigWizard.cc:157
+msgid ""
+"KPilot cannot yet synchronize the addressbook with Evolution, so the "
+"addressbook conduit was disabled.\n"
+"When syncing the calendar or to-do list using KPilot please quit Evolution "
+"before the sync, otherwise you will lose data."
+msgstr ""
+"KPilot 目前還無法與 Evolution 的通訊錄同步,因此通訊錄導管已被關閉。若要使用 KPilot 來同步行事曆或待辦事項,請先離開 "
+"Evolution,以避免資料流失。"
+
+#: kpilot/kpilotConfigWizard.cc:157
+msgid "Restrictions with Evolution"
+msgstr "Evolution 的限制"
+
+#: kpilot/kpilotConfigWizard.cc:162
+msgid ""
+"_: Kpilot will sync with nothing\n"
+"nothing (it will backup only)"
+msgstr "無(只做備份)"
+
+#: kpilot/kpilotConfigWizard.cc:166
+msgid ""
+"_: KDE's PIM suite\n"
+"Kontact"
+msgstr "Kontact"
+
+#: kpilot/kpilotConfigWizard.cc:200
+#, c-format
+msgid "KPilot is now configured to sync with %1."
+msgstr "KPilot 目前設定與 %1 同步。"
+
+#: kpilot/kpilotConfigWizard.cc:205
+msgid ""
+"The remaining options in the config dialog are advanced options and can be used "
+"to fine-tune KPilot."
+msgstr "設定對話框中的其它選項是進階選項,可用於微調 KPilot。"
+
+#: kpilot/kpilotConfigWizard.cc:210
+msgid "Automatic Configuration Finished"
+msgstr "自動組態設定已完成"
+
+#: kpilot/kpilotConfigWizard.cc:217
+msgid ""
+"Please put the handheld in the cradle, press the hotsync button and click on "
+"\"Continue\".\n"
+"\n"
+"Some kernel versions (Linux 2.6.x) have problems with the visor kernel module "
+"(for Sony Clie devices). Running an autodetection in that case might block the "
+"computer from doing hotsyncs until it is rebooted. In that case it might be "
+"advisable not to continue."
+msgstr ""
+"請將掌上型裝置放於架上,按下熱同步鍵,並點選「繼續」。\n"
+"\n"
+"有些核心版本(Linux 2.6.x)的 visor 模組(Sony Clie "
+"裝置用的)有些問題。若使用該模組執行自動偵測可能會鎖住電腦無法執行熱同步,直到重開機為止。若是這種狀況,最好不要繼續。"
+
+#: kpilot/kpilotConfigWizard.cc:223
+msgid "Handheld Detection"
+msgstr "偵測掌上型裝置"
+
+#: kpilot/kpilotConfig.cc:163
+msgid "The configuration file is outdated."
+msgstr "此設定檔已過期。"
+
+#: kpilot/kpilotConfig.cc:165
+msgid "The configuration file has version %1, while KPilot needs version %2."
+msgstr "設定檔的版本為 %1,但 KPilot 需要版本 %2。"
+
+#: kpilot/kpilotConfig.cc:170
+msgid ""
+"Please run KPilot and check the configuration carefully to update the file."
+msgstr "請執行 KPilot 並小心檢查組態設定的更新。"
+
+#: kpilot/kpilotConfig.cc:174
+msgid "Important changes to watch for are:"
+msgstr "您應該檢查一些重要的變更,如:"
+
+#: kpilot/kpilotConfig.cc:178
+msgid ""
+"Renamed conduits, Kroupware and file installer have been made conduits as well."
+msgstr "導管重命名、Kroupware、以及檔案安裝器也做成導管了。"
+
+#: kpilot/kpilotConfig.cc:181
+msgid "Conflict resolution is now a global setting."
+msgstr "解決衝突現在移到了全域設定。"
+
+#: kpilot/kpilotConfig.cc:186
+msgid "Changed format of no-backup databases."
+msgstr "改變無備份資料庫的格式。"
+
+#: kpilot/kpilotConfig.cc:199
+msgid ""
+"The configuration file for KPilot is out-of date. Please run KPilot to update "
+"it."
+msgstr "KPilot 的設定檔已過期。請執行 KPilot 以更新。"
+
+#: kpilot/kpilotConfig.cc:202 kpilot/kpilotConfig.cc:327
+msgid "Configuration File Out-of Date"
+msgstr "設定檔已過期"
+
+#: kpilot/kpilotConfig.cc:220
+msgid ""
+"The settings for the file installer have been moved to the conduits "
+"configuration. Check the installed conduits list."
+msgstr "此檔案安裝器的設定已經移到了導管設定。請檢查已安裝的導管清單。"
+
+#: kpilot/kpilotConfig.cc:223
+msgid "Settings Updated"
+msgstr "設定已更新"
+
+#: kpilot/kpilotConfig.cc:248
+msgid ""
+"<qt>The following old conduits were found on your system. It is a good idea to "
+"remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
+msgstr "<qt>在您的系統上發現了以下的舊導管。建議您將相關的 <tt>.la</tt> 與 <tt>.so.0</tt> 檔案移除。</qt>"
+
+#: kpilot/kpilotConfig.cc:253
+msgid "Old Conduits Found"
+msgstr "找到舊導管"
+
+#: kpilot/kpilotConfig.cc:285
+msgid ""
+"<qt>The no backup databases listed in your configuration file have been "
+"adjusted to the new format. Database creator IDs have been changed to use "
+"square brackets []."
+msgstr "<qt>列在您的設定檔中的無備份資料庫已經調整為新的格式。資料庫建立者代碼已經改為用方括號 [] 括起來。"
+
+#: kpilot/kpilotConfig.cc:289
+msgid "No Backup Databases Updated"
+msgstr "無備份資料庫已更新"
+
+#: kpilot/kpilotConfig.cc:310
+msgid ""
+"KPilot is not configured for use. You may use the configuration wizard or the "
+"normal configure dialog to configure KPilot."
+msgstr "KPilot 設未設定完成。您可以用組態精靈,或是一般的設定對話框來設定 KPilot。"
+
+#: kpilot/kpilotConfig.cc:313
+msgid "Not Configured"
+msgstr "尚未設定"
+
+#: kpilot/kpilotConfig.cc:314
+msgid "Use &Wizard"
+msgstr "使用精靈(&W)"
+
+#: kpilot/kpilotConfig.cc:315
+msgid "Use &Dialog"
+msgstr "使用對話框(&D)"
+
+#: kpilot/kpilotConfig.cc:323
+msgid ""
+"The configuration file for KPilot is out-of date. KPilot can update some parts "
+"of the configuration automatically. Do you wish to continue?"
+msgstr "KPilot 的設定檔已過期。KPilot 可以自動更新設定檔中的某些部份。您要繼續嗎?"
+
+#: kpilot/dbRecordEditor.cc:53
+msgid "Edit Record"
+msgstr "編輯紀錄"
+
+#: kpilot/dbRecordEditor.cc:75
+msgid ""
+"Changing the record data and flags might corrupt the whole record, or even make "
+"the database unusable. Do not change the values unless you are absolutely sure "
+"you know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"變更紀錄資料與旗標可能會造成整個紀錄損毀,或甚至造成整個資料庫無法使用。除非您十分確定您在做什麼,否則不要任意變更這些值。\n"
+"\n"
+"您確定要指定這些新的旗標嗎?"
+
+#: kpilot/dbRecordEditor.cc:75
+msgid "Changing Record"
+msgstr "變更紀錄"
+
+#: kpilot/dbFlagsEditor.cc:60 kpilot/dbRecordEditor.cc:75
+msgid "Assign"
+msgstr "指定"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 24
+#: kpilot/dbRecordEditor.cc:106 rc.cpp:1388
+#, no-c-format
+msgid "Record index:"
+msgstr "紀錄索引:"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 32
+#: kpilot/dbRecordEditor.cc:107 rc.cpp:1391
+#, no-c-format
+msgid "Record ID:"
+msgstr "紀錄代碼:"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 99
+#: kpilot/dbRecordEditor.cc:108 kpilot/dbRecordEditor.cc:109 rc.cpp:980
+#: rc.cpp:1394 rc.cpp:1397
+#, no-c-format
+msgid "1"
+msgstr "1"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 70
+#: kpilot/dbRecordEditor.cc:110 rc.cpp:1400
+#, no-c-format
+msgid "Flags"
+msgstr "旗標"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 81
+#: kpilot/dbRecordEditor.cc:111 rc.cpp:1403
+#, no-c-format
+msgid "&Dirty"
+msgstr "未同步(Dirty)(&D)"
+
+#: kpilot/dbRecordEditor.cc:112
+msgid "De&leted"
+msgstr "已刪除(&L)"
+
+#: kpilot/dbRecordEditor.cc:113
+msgid "&Busy"
+msgstr "忙碌(&B)"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 105
+#: kpilot/dbRecordEditor.cc:114 rc.cpp:1412
+#, no-c-format
+msgid "&Secret"
+msgstr "秘密(&S)"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 113
+#: kpilot/dbRecordEditor.cc:115 rc.cpp:1415
+#, no-c-format
+msgid "&Archived"
+msgstr "已歸檔(&A)"
+
+#: kpilot/dbRecordEditor.cc:193
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. kbytesedit "
+"from tdeutils)."
+msgstr "要檢視與編輯紀錄資料,請安裝十六進位碼編輯器(如 tdeutils 中的 khexedit)。"
+
+#: kpilot/datebookWidget.cc:58 kpilot/dbviewerWidget.cc:109
+msgid "&Add..."
+msgstr "新增(&A)..."
+
+#: kpilot/datebookWidget.cc:61 kpilot/dbviewerWidget.cc:111
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#: kpilot/datebookWidget.cc:64
+msgid "&Delete..."
+msgstr "刪除(&D)..."
+
+#: kpilot/datebookWidget.cc:69
+msgid "Al"
+msgstr "AI"
+
+#: kpilot/datebookWidget.cc:70
+msgid "Rec"
+msgstr "紀錄"
+
+#: kpilot/datebookWidget.cc:71 kpilot/listCat.cc:85
+msgid "Description"
+msgstr "描述"
+
+#: kpilot/dbFlagsEditor.cc:45
+msgid "Edit Database Flags"
+msgstr "編輯資料庫旗標"
+
+#: kpilot/dbFlagsEditor.cc:60
+msgid ""
+"Changing the database flags might corrupt the whole database, or make the data "
+"unusable. Do not change the values unless you are absolutely sure you know what "
+"you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"變更資料庫旗標可能會造成整個資料庫損毀,或是讓資料無法使用。除非您十分確定您在做什麼,否則不要任意變更這些值。\n"
+"\n"
+"您確定要指定這些新的旗標嗎?"
+
+#: kpilot/dbFlagsEditor.cc:60
+msgid "Changing Database Flags"
+msgstr "變更資料庫旗標"
+
+#: kpilot/todoEditor.cc:49
+msgid "To-do Editor"
+msgstr "待辦事項編輯器"
+
+#: kpilot/logWidget.cc:98
+msgid ""
+"<qt>This lists all the messages received during the current HotSync</qt>"
+msgstr "<qt>這裡列出所有熱同步期間接收到的訊息</qt>"
+
+#: kpilot/logWidget.cc:127
+msgid "<qt><b>HotSync Log</b></qt>"
+msgstr "<qt><b>熱同步紀錄</b></qt>"
+
+#: kpilot/logWidget.cc:142
+msgid ""
+"_: Clear the text of HotSync messages\n"
+"Clear Log"
+msgstr "清除紀錄"
+
+#: kpilot/logWidget.cc:144
+msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
+msgstr "<qt>清除目前熱同步的訊息清單。</qt>"
+
+#: kpilot/logWidget.cc:148
+msgid "Save Log..."
+msgstr "儲存紀錄..."
+
+#: kpilot/logWidget.cc:149
+msgid ""
+"<qt>You can save the list of messages received during this HotSync to a file "
+"(for example for use in a bug report) by clicking here.</qt>"
+msgstr "<qt>您可以點選這裡,以將目前熱同步期間所接收到的訊息清單儲存到檔案中(可以用於回報錯誤)。</qt>"
+
+#: kpilot/logWidget.cc:158
+msgid "Sync progress:"
+msgstr "同步進度:"
+
+#: kpilot/logWidget.cc:161
+msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
+msgstr "<qt>目前熱同步已完成的百分比(估計值)</qt>"
+
+#: kpilot/logWidget.cc:283
+msgid "<b>HotSync Finished.</b>"
+msgstr "<b>熱同步已完成。</b>"
+
+#: kpilot/logWidget.cc:347
+msgid "Save Log"
+msgstr "儲存紀錄"
+
+#: kpilot/logWidget.cc:354
+msgid "The file exists. Do you want to overwrite it?"
+msgstr "檔案已存在。您要覆寫它嗎?"
+
+#: kpilot/logWidget.cc:356
+msgid "File Exists"
+msgstr "檔案已存在"
+
+#: kpilot/logWidget.cc:356
+msgid "Do Not Overwrite"
+msgstr "不要覆寫"
+
+#: kpilot/logWidget.cc:380
+msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
+msgstr "<qt>無法開啟檔案 %1 以寫入。要再試一次嗎?</qt>"
+
+#: kpilot/logWidget.cc:382
+msgid "Cannot Save"
+msgstr "無法儲存"
+
+#: kpilot/logWidget.cc:382
+msgid "Try Again"
+msgstr "再試一次"
+
+#: kpilot/logWidget.cc:382
+msgid "Do Not Try"
+msgstr "不要嘗試"
+
+#: kpilot/pilotDaemon.cc:157
+msgid "Start &KPilot"
+msgstr "啟動 KPilot(&K)"
+
+#: kpilot/pilotDaemon.cc:159
+msgid "&Configure KPilot..."
+msgstr "設定 KPilot(&C)..."
+
+#: kpilot/pilotDaemon.cc:164
+msgid ""
+"_: Appended to names of sync types to indicate the sync will happen just one "
+"time\n"
+" (once)"
+msgstr "(只做一次)"
+
+#: kpilot/pilotDaemon.cc:168
+msgid "Default (%1)"
+msgstr "預設(%1)"
+
+#: kpilot/pilotDaemon.cc:185
+msgid "Next &Sync"
+msgstr "下一次同步(&S)"
+
+#: kpilot/pilotDaemon.cc:670
+msgid "Next HotSync will be: %1. "
+msgstr "下一次熱同步將是:%1。"
+
+#: kpilot/kpilot.cc:361 kpilot/kpilot.cc:369 kpilot/kpilot.cc:377
+#: kpilot/kpilot.cc:385 kpilot/kpilot.cc:393 kpilot/kpilot.cc:401
+#: kpilot/pilotDaemon.cc:671
+msgid "Please press the HotSync button."
+msgstr "請按下熱同步鍵。"
+
+#: kpilot/kpilot.cc:278 kpilot/kpilot.cc:281 kpilot/pilotDaemon.cc:736
+msgid "File Installer"
+msgstr "檔案安裝器"
+
+#: kpilot/pilotDaemon.cc:902
+msgid "HotSync is disabled while the screen is locked."
+msgstr "螢幕鎖定時,熱同步會被關閉。"
+
+#: kpilot/pilotDaemon.cc:907
+msgid ""
+"HotSync is disabled because KPilot could not determine the state of the screen "
+"saver. You can disable this security feature by unchecking the 'do not sync "
+"when screensaver is active' box in the HotSync page of the configuration "
+"dialog."
+msgstr ""
+"熱同步會被關閉,因為 KPilot "
+"無法決定螢幕保護程式的狀態。若您堅持要這樣做,您可以在設定對話框中的「熱同步」頁中,取消勾選「螢幕保護程式啟動時不要同步」。"
+
+#: kpilot/pilotDaemon.cc:1165 kpilot/pilotDaemon.cc:1166
+msgid "HotSync Completed.<br>"
+msgstr "熱同步已完成<br>"
+
+#: kpilot/pilotDaemon.cc:1274
+#, c-format
+msgid "Next sync is %1."
+msgstr "下一次同步是 %1。"
+
+#: kpilot/kpilot.cc:993 kpilot/pilotDaemon.cc:1296
+msgid "Set debugging level"
+msgstr "設定除錯等級"
+
+#: kpilot/pilotDaemon.cc:1298
+msgid "Device to try first"
+msgstr "先試的裝置"
+
+#: kpilot/pilotDaemon.cc:1299
+msgid "Exit instead of complaining about bad configuration files"
+msgstr "若是設定檔有問題,則離開而不抱怨。"
+
+#: kpilot/pilotDaemon.cc:1311
+msgid "KPilot Daemon"
+msgstr "KPilot 守護程式"
+
+#: kpilot/kpilot.cc:1024 kpilot/pilotDaemon.cc:1320
+msgid "Project Leader"
+msgstr "專案領導者"
+
+#: kpilot/pilotDaemon.cc:1326
+msgid "Developer"
+msgstr "開發者"
+
+#: kpilot/kroupware.cc:126
+msgid "Syncing to-dos with KMail"
+msgstr "與 KMail 同步待辦事項"
+
+#: kpilot/kroupware.cc:135
+msgid "Syncing calendar with KMail"
+msgstr "與 KMail 同步行事曆"
+
+#: kpilot/kroupware.cc:177
+msgid "Syncing Notes with Mail"
+msgstr "與 KMail 同步備忘錄"
+
+#: kpilot/kroupware.cc:188
+msgid "Rewriting to-dos to KMail..."
+msgstr "重新將待辦事項寫入 KMail..."
+
+#: kpilot/kroupware.cc:195
+msgid "Rewriting Calendar to KMail"
+msgstr "重新將行事曆寫入 KMail..."
+
+#: kpilot/kroupware.cc:230
+msgid "Syncing KMail with Addresses "
+msgstr "同步 KMail 與通訊錄中"
+
+#: kpilot/kroupware.cc:259
+msgid "Syncing KMail with Notes"
+msgstr "同步 KMail 與備忘錄中"
+
+#: kpilot/dbAppInfoEditor.cc:46
+msgid "Edit AppInfo Block"
+msgstr "編輯應用程式資訊區塊"
+
+#: kpilot/dbAppInfoEditor.cc:68
+msgid ""
+"To view the Application info block data, please install a hex editor (e.g. "
+"khexedit from tdeutils)."
+msgstr "要檢視應用程式資訊區塊的資料,請安裝十六進位碼編輯器(如 tdeutils 中的 khexedit)"
+
+#: kpilot/dbAppInfoEditor.cc:86
+msgid "Changing the AppInfo block isn't yet supported by KPilot!"
+msgstr "KPilot 尚未支援變更應用程式區塊。"
+
+#: kpilot/memoWidget.cc:234
+msgid ""
+"Select the category of addresses\n"
+"to display here."
+msgstr "選擇要在此顯示的通訊錄類別。"
+
+#: kpilot/memoWidget.cc:237
+msgid "Memos:"
+msgstr "備忘錄:"
+
+#: kpilot/addressWidget.cc:226 kpilot/memoWidget.cc:238
+#: kpilot/todoWidget.cc:220
+msgid "Category:"
+msgstr "類別:"
+
+#: kpilot/memoWidget.cc:249
+msgid ""
+"This list displays all the memos\n"
+"in the selected category. Click on\n"
+"one to display it to the right."
+msgstr ""
+"此清單顯示所選類別的所有備忘錄。\n"
+"點選其中一個,可以在右邊顯示。"
+
+#: kpilot/memoWidget.cc:253
+msgid "Memo text:"
+msgstr "備忘錄文字:"
+
+#: kpilot/memoWidget.cc:261
+msgid "The text of the selected memo appears here."
+msgstr "所選取的備忘錄中的文字顯示在這裡。"
+
+#: kpilot/memoWidget.cc:264
+msgid "Import Memo..."
+msgstr "匯入備忘錄..."
+
+#: kpilot/memoWidget.cc:268
+msgid "Read a text file and add it to the Pilot's memo database."
+msgstr "讀取文字檔,並新增到 Pilot 的備忘資料庫。"
+
+#: kpilot/memoWidget.cc:269
+msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉匯入功能。</i></qt>"
+
+#: kpilot/memoWidget.cc:272
+msgid "Export Memo..."
+msgstr "匯出備忘錄..."
+
+#: kpilot/memoWidget.cc:277
+msgid "Write the selected memo to a file."
+msgstr "將所選取的備忘錄寫入到檔案。"
+
+#: kpilot/memoWidget.cc:279
+msgid "Delete Memo"
+msgstr "刪除備忘錄"
+
+#: kpilot/memoWidget.cc:284
+msgid "Delete the selected memo."
+msgstr "刪除所選取的備忘錄。"
+
+#: kpilot/addressWidget.cc:275 kpilot/memoWidget.cc:285
+#: kpilot/todoWidget.cc:281
+msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉刪除功能。</i></qt>"
+
+#: kpilot/memoWidget.cc:288
+msgid "Add Memo"
+msgstr "新增備忘錄"
+
+#: kpilot/memoWidget.cc:291
+msgid "Add a new memo to the database."
+msgstr "新增新的備忘錄到資料庫中。"
+
+#: kpilot/memoWidget.cc:343
+msgid "Delete currently selected memo?"
+msgstr "要刪除所選取的備忘錄嗎?"
+
+#: kpilot/memoWidget.cc:344
+msgid "Delete Memo?"
+msgstr "刪除備忘錄?"
+
+#: kpilot/memoWidget.cc:367
+msgid "Cannot open MemoDB to delete record."
+msgstr "無法開啟備忘錄資料庫以刪除紀錄。"
+
+#: kpilot/memoWidget.cc:368
+msgid "Cannot Delete Memo"
+msgstr "無法刪除備忘錄"
+
+#: kpilot/addressEditor.cc:60
+msgid "Address Editor"
+msgstr "地址編輯器"
+
+#: kpilot/addressEditor.cc:108
+msgid "Phone"
+msgstr "電話"
+
+#: kpilot/addressEditor.cc:181
+msgid "Last name:"
+msgstr "姓:"
+
+#: kpilot/addressEditor.cc:182
+msgid "First name:"
+msgstr "名:"
+
+#: kpilot/addressEditor.cc:183
+msgid "Title:"
+msgstr "職稱:"
+
+#: kpilot/addressEditor.cc:184
+msgid "Company:"
+msgstr "公司:"
+
+#: kpilot/addressEditor.cc:193
+msgid "Address:"
+msgstr "地址:"
+
+#: kpilot/addressEditor.cc:194
+msgid "City:"
+msgstr "城市:"
+
+#: kpilot/addressEditor.cc:195
+msgid "State:"
+msgstr "省/州:"
+
+#: kpilot/addressEditor.cc:196
+msgid "Zip code:"
+msgstr "郵遞區號:"
+
+#: kpilot/addressEditor.cc:197
+msgid "Country:"
+msgstr "國家:"
+
+#: kpilot/addressEditor.cc:198
+msgid "Custom 1:"
+msgstr "自訂 1:"
+
+#: kpilot/addressEditor.cc:199
+msgid "Custom 2:"
+msgstr "自訂 2:"
+
+#: kpilot/addressEditor.cc:200
+msgid "Custom 3:"
+msgstr "自訂 3:"
+
+#: kpilot/addressEditor.cc:201
+msgid "Custom 4:"
+msgstr "自訂 4:"
+
+#: kpilot/pilotComponent.cc:153
+msgid "All"
+msgstr "全部"
+
+#: kpilot/kpilotConfigDialog.cc:68
+msgid ""
+"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
+"want to save the changes before continuing?</qt>"
+msgstr "<qt>設定頁 <i>%1</i> 中的設定已變更。您要儲存變更嗎?</qt>"
+
+#: kpilot/kpilotConfigDialog.cc:145
+msgid ""
+"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. This "
+"is probably unsupported and can cause problems. Are you sure you want to use "
+"this device name?</qt>"
+msgstr "<qt>您輸入的裝置名稱(<i>%1</i>)超過了 13 個字元,可能無法支援並會產生問題。您確定要使用此裝置名稱嗎?</qt>"
+
+#: kpilot/kpilotConfigDialog.cc:150
+msgid "Device Name too Long"
+msgstr "裝置名稱過長"
+
+#: kpilot/kpilotConfigDialog.cc:150
+msgid "Use"
+msgstr "使用"
+
+#: kpilot/kpilotConfigDialog.cc:150
+msgid "Do Not Use"
+msgstr "不使用"
+
+#: kpilot/dbviewerWidget.cc:84
+msgid "All Databases"
+msgstr "所有資料庫"
+
+#: kpilot/dbviewerWidget.cc:85
+msgid "Only Applications (*.prc)"
+msgstr "應用程式(*.prc)"
+
+#: kpilot/dbviewerWidget.cc:86
+msgid "Only Databases (*.pdb)"
+msgstr "資料庫(*.pdb)"
+
+#: kpilot/dbviewerWidget.cc:93
+msgid "General Database &Information"
+msgstr "一般資料庫資訊(&I)"
+
+#: kpilot/dbviewerWidget.cc:95
+msgid "&Application Info Block (Categories etc.)"
+msgstr "應用程式資訊區塊(類別等等)(&A)"
+
+#: kpilot/dbviewerWidget.cc:101
+msgid "Rec. Nr."
+msgstr "紀錄數量"
+
+#: kpilot/dbviewerWidget.cc:102
+msgid "Length"
+msgstr "長度"
+
+#: kpilot/dbviewerWidget.cc:103
+msgid "Record ID"
+msgstr "紀錄代碼"
+
+#: kpilot/dbviewerWidget.cc:189
+#, c-format
+msgid "<B>Warning:</B> Cannot read database file %1."
+msgstr "<B>警告:</B>無法讀取資料庫檔案 %1。"
+
+#: kpilot/dbviewerWidget.cc:194
+msgid "<B>Database:</B> %1, %2 records<BR>"
+msgstr "<B>資料庫:</B>%1,%2 筆紀錄<BR>"
+
+#: kpilot/dbviewerWidget.cc:203
+msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
+msgstr "<B>類型:</B>%1,<B>建立者:</B>%2<br><br>"
+
+#: kpilot/dbviewerWidget.cc:246 kpilot/dbviewerWidget.cc:253
+#, c-format
+msgid "<B>Warning:</B> Cannot read application file %1."
+msgstr "<B>警告:</B>無法讀取應用程式檔案 %1。"
+
+#: kpilot/dbviewerWidget.cc:260
+msgid "<B>Application:</B> %1<BR><BR>"
+msgstr "<B>應用程式:</B>%1<BR><BR>"
+
+#: kpilot/dbviewerWidget.cc:267
+msgid "Created: %1<BR>"
+msgstr "已建立:%1<BR>"
+
+#: kpilot/dbviewerWidget.cc:270
+msgid "Modified: %1<BR>"
+msgstr "已修改:%1<BR>"
+
+#: kpilot/dbviewerWidget.cc:273
+msgid "Backed up: %1<BR>"
+msgstr "已備份:%1<BR>"
+
+#: kpilot/dbviewerWidget.cc:353
+msgid "You must select a record for editing."
+msgstr "您必須選擇要編輯的紀錄。"
+
+#: kpilot/dbviewerWidget.cc:353
+msgid "No Record Selected"
+msgstr "沒有選取紀錄"
+
+#: kpilot/dbviewerWidget.cc:366
+msgid ""
+"<qt>Do you really want to delete the selected record? This cannot be undone."
+"<br>"
+"<br>Delete record?<qt>"
+msgstr "<qt>您確定要刪除所選取的紀錄嗎?此動作無法復原。<br><br>要刪除紀錄嗎?<qt>"
+
+#: kpilot/dbviewerWidget.cc:366
+msgid "Deleting Record"
+msgstr "刪除紀錄中"
+
+#: kpilot/todoWidget.cc:174
+msgid "There are still %1 to-do editing windows open."
+msgstr "目前仍開著 %1 待辦事項視窗。"
+
+#: kpilot/todoWidget.cc:178
+#, c-format
+msgid ""
+"_n: There is still a to-do editing window open.\n"
+"There are still %n to-do editing windows open."
+msgstr "目前仍開著 %n 個待辦事項視窗。"
+
+#: kpilot/todoWidget.cc:218
+msgid "<qt>Select the category of to-dos to display here.</qt>"
+msgstr "<qt>選取要在此顯示的待辦事項類別。</qt>"
+
+#: kpilot/todoWidget.cc:225
+msgid "To-do Item"
+msgstr "待辦事項項目"
+
+#: kpilot/todoWidget.cc:243
+msgid ""
+"<qt>This list displays all the to-dos in the selected category. Click on one to "
+"display it to the right.</qt>"
+msgstr "<qt>這個清單顯示所選取類別的所有待辦事項。點選其中一個,可以在右邊顯示。</qt>"
+
+#: kpilot/todoWidget.cc:247
+msgid "To-do info:"
+msgstr "待辦事項資訊:"
+
+#: kpilot/addressWidget.cc:251 kpilot/todoWidget.cc:257
+msgid "Edit Record..."
+msgstr "編輯紀錄..."
+
+#: kpilot/todoWidget.cc:262
+msgid "<qt>You can edit a to-do when it is selected.</qt>"
+msgstr "<qt>您可以選取並編輯待辦事項。</qt>"
+
+#: kpilot/addressWidget.cc:256 kpilot/todoWidget.cc:263
+msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉編輯功能。</i></qt>"
+
+#: kpilot/addressWidget.cc:259 kpilot/todoWidget.cc:266
+msgid "New Record..."
+msgstr "新紀錄..."
+
+#: kpilot/todoWidget.cc:270
+msgid "<qt>Add a new to-do to the to-do list.</qt>"
+msgstr "<qt>新增待辦事項到清單中。</qt>"
+
+#: kpilot/todoWidget.cc:271
+msgid ""
+"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉新增待辦事項功能。</i></qt>"
+
+#: kpilot/addressWidget.cc:269 kpilot/todoWidget.cc:275
+msgid "Delete Record"
+msgstr "刪除紀錄"
+
+#: kpilot/todoWidget.cc:280
+msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
+msgstr "<qt>從清單中刪除所選取的待辦事項。</qt>"
+
+#: kpilot/addressWidget.cc:435 kpilot/todoWidget.cc:363
+msgid "Cannot edit new records until HotSynced with Pilot."
+msgstr "在與 Pilot 做熱同步前無法編輯新的紀錄。"
+
+#: kpilot/addressWidget.cc:437 kpilot/addressWidget.cc:574
+#: kpilot/todoWidget.cc:365 kpilot/todoWidget.cc:498
+msgid "HotSync Required"
+msgstr "需要熱同步"
+
+#: kpilot/todoWidget.cc:408
+msgid ""
+"You cannot add to-dos to the to-do list until you have done a HotSync at least "
+"once to retrieve the database layout from your Pilot."
+msgstr "您必須至少執行一次熱同步,從您的 Pilot 上取得資料庫佈局之後,您才能夠開始新增待辦事項。"
+
+#: kpilot/todoWidget.cc:411
+msgid "Cannot Add New To-do"
+msgstr "無法新增待辦事項"
+
+#: kpilot/addressWidget.cc:572 kpilot/todoWidget.cc:496
+msgid "New records cannot be deleted until HotSynced with pilot."
+msgstr "在與 Pilot 做熱同步前無法刪除新的紀錄。"
+
+#: kpilot/addressWidget.cc:579 kpilot/todoWidget.cc:503
+msgid "Delete currently selected record?"
+msgstr "要刪除目前選取的紀錄嗎?"
+
+#: kpilot/addressWidget.cc:580 kpilot/todoWidget.cc:504
+msgid "Delete Record?"
+msgstr "刪除紀錄?"
+
+#: kpilot/internalEditorAction.cc:62
+msgid "[Internal Editors]"
+msgstr "【內部編輯器】"
+
+#: kpilot/internalEditorAction.cc:76
+#, c-format
+msgid "Databases with changed records: %1"
+msgstr "含有已變更紀錄的資料庫:%1"
+
+#: kpilot/internalEditorAction.cc:101
+msgid "Unable to open the serial or local database for %1. Skipping it."
+msgstr "無法開啟 %1 的序列或本地資料庫。將略過。"
+
+#: kpilot/internalEditorAction.cc:156
+msgid "record"
+msgstr "紀錄"
+
+#: kpilot/internalEditorAction.cc:166
+msgid "address"
+msgstr "地址"
+
+#: kpilot/internalEditorAction.cc:177
+msgid "to-do entry"
+msgstr "待辦事項"
+
+#: kpilot/internalEditorAction.cc:186
+msgid "memo"
+msgstr "備忘"
+
+#: kpilot/internalEditorAction.cc:197
+msgid "calendar entry"
+msgstr "行事曆項目"
+
+#: kpilot/internalEditorAction.cc:204
+msgid ""
+"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in the "
+"internal editor. Shall the changes in KPilot be copied to the handheld, and so "
+"override the changes there?"
+msgstr ""
+"資料庫 %3 的 %1(ID %2)已經在掌上型裝置與內部編輯器上都做了變更。要將 KPilot 上的變更複製到掌上型裝置,並覆寫那邊的變更嗎?"
+
+#: kpilot/internalEditorAction.cc:209
+#, c-format
+msgid "Conflict in database %1"
+msgstr "資料庫 %1 發生衝突"
+
+#: kpilot/internalEditorAction.cc:211
+msgid "Use KPilot"
+msgstr "使用 KPilot"
+
+#: kpilot/internalEditorAction.cc:211
+msgid "Use Handheld"
+msgstr "使用掌上型裝置"
+
+#: kpilot/internalEditorAction.cc:212
+msgid "Use &KPilot"
+msgstr "使用 KPilot(&K)"
+
+#: kpilot/internalEditorAction.cc:213
+msgid "Use &Handheld"
+msgstr "使用掌上型裝置(&H)"
+
+#: kpilot/internalEditorAction.cc:228 kpilot/internalEditorAction.cc:244
+msgid "Entry in KPilot"
+msgstr "KPilot 裡的項目"
+
+#: kpilot/internalEditorAction.cc:235 kpilot/internalEditorAction.cc:272
+msgid "Entry on Handheld"
+msgstr "掌上型裝置裡的項目"
+
+#: kpilot/internalEditorAction.cc:263 kpilot/internalEditorAction.cc:291
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. khexedit "
+"from tdeutils)."
+msgstr "要檢視並編輯紀錄資料,請安裝十六進位碼編輯器(如 tdeutils 中的 khexedit)"
+
+#: kpilot/internalEditorAction.cc:315
+#, c-format
+msgid "Databases with changed flags: %1"
+msgstr "已變更的資料庫:%1"
+
+#: kpilot/internalEditorAction.cc:333
+msgid "Setting the database flags on the handheld is not yet supported."
+msgstr "尚未支援設定掌上型裝置的資料庫旗標。"
+
+#: kpilot/internalEditorAction.cc:356
+#, c-format
+msgid "Databases with changed AppBlock: %1"
+msgstr "已變更應用程式區塊的資料庫:%1"
+
+#: kpilot/kpilotProbeDialog.cc:90
+msgid "Autodetecting Your Handheld"
+msgstr "自動偵測您的掌上型裝置"
+
+#: kpilot/kpilotProbeDialog.cc:90
+msgid "Restart Detection"
+msgstr "重新開始偵測"
+
+#: kpilot/kpilotProbeDialog.cc:97
+msgid ""
+"KPilot is now trying to automatically detect the device of your handheld. "
+"Please press the hotsync button if you have not done so already."
+msgstr "KPilot 現在正試著自動偵測您的掌上型裝置。如果您尚未執行,請按下熱同步鍵。"
+
+#: kpilot/kpilotProbeDialog.cc:100
+msgid "Status"
+msgstr "狀態"
+
+#: kpilot/kpilotProbeDialog.cc:104
+msgid "Autodetection not yet started..."
+msgstr "自動偵測尚未開始..."
+
+#: kpilot/kpilotProbeDialog.cc:113
+msgid "Detected Values"
+msgstr "偵測值"
+
+#: kpilot/kpilotProbeDialog.cc:119
+msgid "Handheld user:"
+msgstr "掌上型裝置使用者:"
+
+#: kpilot/kpilotProbeDialog.cc:123
+msgid "Device:"
+msgstr "裝置:"
+
+#: kpilot/kpilotProbeDialog.cc:126 kpilot/kpilotProbeDialog.cc:129
+msgid "[Not yet known]"
+msgstr "【尚未知】"
+
+#: kpilot/kpilotProbeDialog.cc:195
+msgid "Starting detection..."
+msgstr "開始偵測..."
+
+#: kpilot/kpilotProbeDialog.cc:233
+msgid "Waiting for handheld to connect..."
+msgstr "等待掌上型裝置連線..."
+
+#: kpilot/kpilotProbeDialog.cc:266
+msgid "Timeout reached, could not detect a handheld."
+msgstr "已逾時,無法偵測到掌上型裝置。"
+
+#: kpilot/kpilotProbeDialog.cc:267
+msgid ""
+"<qt>A handheld could not be detected. Possible check the following things:</p>"
+"<ul>"
+"<li> Have you pressed the hotsync button on the handheld?\n"
+"<li> Make sure the device sits in the cradle correctly.\n"
+"<li> Make sure the cradle is correctly plugged in to the computer.\n"
+"<li> Have you checked that your device is actually supported by kpilot (see "
+"http://www.kpilot.org).\n"
+"</ul>"
+msgstr ""
+"<qt>"
+"<p>無法偵測到掌上型裝置。請檢查下列事項:</p> "
+"<ul> "
+"<li>您是否已按下了掌上型裝置上的熱同步鍵?\n"
+"<li>請確認此裝置已正確地放置在架上。\n"
+"<li>請確定裝置架已正確地連線到電腦上。\n"
+"<li>您是否確定 KPilot 支援您的裝置?(請參考 http://www.kpilot.org)\n"
+"</ul>"
+
+#: kpilot/kpilotProbeDialog.cc:273
+msgid "Automatic Detection Failed"
+msgstr "自動偵測失敗"
+
+#: kpilot/kpilotProbeDialog.cc:288
+#, c-format
+msgid "Found a connected device on %1"
+msgstr "在 %1 找到一個已連線的裝置"
+
+#: kpilot/kpilotProbeDialog.cc:338
+msgid "Disconnected from all devices"
+msgstr "中斷與所有裝置的連線"
+
+#: kpilot/fileInstallWidget.cc:71
+msgid "Files to install:"
+msgstr "要安裝的檔案:"
+
+#: kpilot/fileInstallWidget.cc:77
+msgid "Add File..."
+msgstr "新增檔案..."
+
+#: kpilot/fileInstallWidget.cc:81
+msgid "<qt>Choose a file to add to the list of files to install.</qt>"
+msgstr "<qt>請選取要新增到安裝檔案清單中檔案。</qt>"
+
+#: kpilot/fileInstallWidget.cc:83
+msgid "Clear List"
+msgstr "清除清單"
+
+#: kpilot/fileInstallWidget.cc:87
+msgid ""
+"<qt>Clear the list of files to install. No files will be installed.</qt>"
+msgstr "<qt>清除要安裝的檔案清單。將不安裝任何檔案。</qt>"
+
+#: kpilot/fileInstallWidget.cc:95
+msgid ""
+"<qt>This lists files that will be installed on the Pilot during the next "
+"HotSync. Drag files here or use the Add button.</qt>"
+msgstr "<qt>這裡列出在下次熱同步時要安裝在 Pilot 上的檔案。您可以將檔案拖放到這裡,或是用「新增」按鍵來新增。</qt>"
+
+#: kpilot/fileInstallWidget.cc:217
+msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
+msgstr "*.pdb *.prc|PalmOS 資料庫(*.pdb *.prc)"
+
+#: kpilot/fileInstallWidget.cc:291
+msgid ""
+"_: Delete a single file item\n"
+"Delete"
+msgstr "刪除"
+
+#: kpilot/fileInstallWidget.cc:294
+msgid "Delete selected files"
+msgstr "刪除所選取的檔案。"
+
+#: kpilot/hotSync.cc:339
+#, c-format
+msgid "Backup directory: %1."
+msgstr "備份目錄:%1。"
+
+#: kpilot/hotSync.cc:353
+msgid "Full backup started."
+msgstr "開始完整備份。"
+
+#: kpilot/hotSync.cc:358
+msgid "Fast backup started"
+msgstr "開始快速備份。"
+
+#: kpilot/hotSync.cc:387
+msgid "Exiting on cancel."
+msgstr "已取消而離開。"
+
+#: kpilot/hotSync.cc:399
+msgid "Full backup complete."
+msgstr "完整備份已完成。"
+
+#: kpilot/hotSync.cc:403
+msgid "Fast backup complete."
+msgstr "快速備份已完成。"
+
+#: kpilot/hotSync.cc:419
+#, c-format
+msgid "Backing up: %1"
+msgstr "備份:%1"
+
+#: kpilot/hotSync.cc:447
+#, c-format
+msgid "Skipping %1"
+msgstr "略過 %1"
+
+#: kpilot/hotSync.cc:482
+msgid ""
+"Backup of %1 failed.\n"
+msgstr ""
+"%1 備份失敗。\n"
+
+#: kpilot/hotSync.cc:540
+msgid ""
+"... OK.\n"
+msgstr ""
+" .. 完成\n"
+
+#: kpilot/hotSync.cc:548
+msgid "Backup failed."
+msgstr "備份失敗。"
+
+#: kpilot/hotSync.cc:607
+msgid "[File Installer]"
+msgstr "【檔案安裝器】"
+
+#: kpilot/hotSync.cc:612
+msgid "No Files to install"
+msgstr "沒有要安裝的檔案"
+
+#: kpilot/hotSync.cc:624
+#, c-format
+msgid ""
+"_n: Installing one file\n"
+"Installing %n Files"
+msgstr "安裝了 %n 個檔案"
+
+#: kpilot/hotSync.cc:649
+msgid "Done Installing Files"
+msgstr "安裝檔案已完成"
+
+#: kpilot/hotSync.cc:663
+#, c-format
+msgid "Installing %1"
+msgstr "安裝 %1 中"
+
+#: kpilot/hotSync.cc:686
+msgid "Cannot install file &quot;%1&quot;."
+msgstr "無法安裝檔案 %1"
+
+#: kpilot/hotSync.cc:713 kpilot/hotSync.cc:723
+msgid "Unable to open file &quot;%1&quot;."
+msgstr "無法開啟檔案 %1"
+
+#: kpilot/hotSync.cc:732
+msgid "Unable to read file &quot;%1&quot;."
+msgstr "無法讀取檔案 %1"
+
+#: kpilot/hotSync.cc:748
+msgid ""
+"The database in &quot;%1&quot; has a resource name that is longer than 31 "
+"characters. This suggests a bug in the tool used to create the database. KPilot "
+"cannot install this database."
+msgstr "%1 的資料庫中含有超過 31 個字元的資源名稱。這表示用於建立資料庫的工具可能有問題。KPilot 無法安裝此資料庫。"
+
+#: kpilot/hotSync.cc:806
+msgid ""
+"_: A common name\n"
+"John Doe"
+msgstr "John Doe"
+
+#: kpilot/hotSync.cc:808
+msgid ""
+"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
+"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
+msgstr ""
+"<qt>KPilot 與掌上型裝置都沒有設定使用者名稱。使用者名稱必須要設定。要讓 KPilot 設為預設值(<i>%1</i>)嗎?</qt>"
+
+#: kpilot/hotSync.cc:814 kpilot/hotSync.cc:831 kpilot/hotSync.cc:855
+msgid "User Unknown"
+msgstr "使用者未知"
+
+#: kpilot/hotSync.cc:826
+msgid ""
+"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
+"KPilot use this username in future?</qt>"
+msgstr "<qt>掌上型裝置中有設定使用者名稱(<i>%1</i>),但是 KPilot 沒有。要讓 KPilot 將來都用這個使用者名稱嗎?"
+
+#: kpilot/hotSync.cc:844
+msgid ""
+"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
+"KPilot's username be set in the handheld as well?"
+msgstr "<qt>KPilot 中有設定使用者名稱(<i>%1</i>),但是掌上型裝置沒有。要讓掌上型裝置設定此使用者名稱嗎?"
+
+#: kpilot/hotSync.cc:848
+msgid ""
+"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
+"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to stop "
+"this sync.)"
+msgstr "<br/>(注意:若是您的掌上型裝置已被重置回出廠預設值,您應該用「回復」而不是用熱同步。點選「取消」來取消這次同步。)"
+
+#: kpilot/hotSync.cc:877
+msgid ""
+"<qt>The handheld thinks that the username is %1; however, KPilot says you are "
+"%2.Which of these is the correct name?\n"
+"If you click on Cancel, the sync will proceed, but the usernames will not be "
+"changed.</qt>"
+msgstr ""
+"<qt>掌上型裝置認為使用者名稱為 %1,但是 KPilot 認為您是 %2。哪個才是正確的?如果您選擇「取消」,會繼續同步,但是使用者名稱不會變更。</qt>"
+
+#: kpilot/hotSync.cc:887
+msgid "User Mismatch"
+msgstr "使用者不符合"
+
+#: kpilot/hotSync.cc:890
+msgid "Use KPilot Name"
+msgstr "使用 KPilot 名稱"
+
+#: kpilot/hotSync.cc:891
+msgid "Use Handheld Name"
+msgstr "使用掌上型裝置名稱"
+
+#: kpilot/hotSync.cc:997
+msgid "Restore directory does not exist."
+msgstr "要回復的目錄不存在。"
+
+#: kpilot/hotSync.cc:998 kpilot/hotSync.cc:1013
+msgid "Restore not performed."
+msgstr "回復未執行。"
+
+#: kpilot/hotSync.cc:1003
+msgid ""
+"<qt>Are you sure you want to completely restore your Pilot from the backup "
+"directory (<i>%1</i>)? This will erase any information you currently have on "
+"your Pilot.</qt>"
+msgstr "<qt>您確定您要從備份目錄(<i>%1</i>)中完整回復您的 Pilot 嗎?這會將您的 Pilot 上現有的資訊消除掉。</qt>"
+
+#: kpilot/hotSync.cc:1008
+msgid "Restore Pilot"
+msgstr "回復 Pilot"
+
+#: kpilot/hotSync.cc:1010
+msgid "Restore <i>not</i> performed."
+msgstr "回復<i>未</i>執行。"
+
+#: kpilot/hotSync.cc:1012
+msgid "Canceled by user."
+msgstr "使用者已取消。"
+
+#: kpilot/hotSync.cc:1024 kpilot/hotSync.cc:1094
+msgid "Restoring %1..."
+msgstr "回復 %1 中..."
+
+#: kpilot/hotSync.cc:1044
+msgid "File '%1' cannot be read."
+msgstr "無法讀取檔案 %1。"
+
+#: kpilot/hotSync.cc:1071
+msgid "OK."
+msgstr "完成。"
+
+#: kpilot/hotSync.cc:1085
+msgid "Restore incomplete."
+msgstr "回復未完成。"
+
+#: kpilot/hotSync.cc:1100
+msgid "Cannot restore file `%1'."
+msgstr "無法回復檔案 %1。"
+
+#: kpilot/kpilot.cc:162
+msgid "Starting the KPilot daemon ..."
+msgstr "啟動 KPilot 守護程式..."
+
+#: kpilot/kpilot.cc:179
+msgid ""
+"Could not start the KPilot daemon. The system error message was: &quot;%1&quot;"
+msgstr "無法啟動 KPilot 守護程式。系統錯誤訊息為:%1"
+
+#: kpilot/kpilot.cc:196
+msgid "Daemon status is `%1'"
+msgstr "守護程式狀態為:%1"
+
+#: kpilot/kpilot.cc:197
+msgid "not running"
+msgstr "未執行"
+
+#: kpilot/kpilot.cc:214
+msgid "Using character set %1 on the handheld."
+msgstr "掌上型裝置使用字元集 %1。"
+
+#: kpilot/kpilot.cc:266 kpilot/kpilot.cc:268
+msgid "To-do Viewer"
+msgstr "待辦事項檢視器"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 74
+#: kpilot/kpilot.cc:270 kpilot/kpilot.cc:272 rc.cpp:1238
+#, no-c-format
+msgid "Address Viewer"
+msgstr "地址檢視器"
+
+#: kpilot/kpilot.cc:274 kpilot/kpilot.cc:276
+msgid "Memo Viewer"
+msgstr "備忘錄檢視器"
+
+#: kpilot/kpilot.cc:283 kpilot/kpilot.cc:285
+msgid "Generic DB Viewer"
+msgstr "一般資料庫檢視器"
+
+#: kpilot/kpilot.cc:360
+msgid "Next sync will be a backup. "
+msgstr "下一次同步將做備份。"
+
+#: kpilot/kpilot.cc:368
+msgid "Next sync will restore the Pilot from backup. "
+msgstr "下一次同步將從備份回復 Pilot。"
+
+#: kpilot/kpilot.cc:376
+msgid "Next sync will be a regular HotSync. "
+msgstr "下一次同步將做正規的熱同步。"
+
+#: kpilot/kpilot.cc:384
+msgid "Next sync will be a Full Sync. "
+msgstr "下一次同步將做完整同步。"
+
+#: kpilot/kpilot.cc:392
+msgid "Next sync will copy Handheld data to PC. "
+msgstr "下一次同步將複製掌上型裝置資料到 PC。"
+
+#: kpilot/kpilot.cc:400
+msgid "Next sync will copy PC data to Handheld. "
+msgstr "下一次同步將複製 PC 資料到掌上型裝置。"
+
+#: kpilot/kpilot.cc:428
+msgid "The daemon has exited."
+msgstr "守護程式已離開。"
+
+#: kpilot/kpilot.cc:429
+msgid "No further HotSyncs are possible."
+msgstr "無法再做熱同步。"
+
+#: kpilot/kpilot.cc:430
+msgid "Restart the daemon to HotSync again."
+msgstr "要再做熱同步,請重新啟動守護程式。"
+
+#: kpilot/kpilot.cc:450
+#, c-format
+msgid "Cannot start a Sync now. %1"
+msgstr "目前無法啟動同步。%1"
+
+#: kpilot/kpilot.cc:463
+msgid "Cannot start Sync"
+msgstr "無法開始同步。"
+
+#: kpilot/kpilot.cc:517
+msgid "Select the kind of HotSync to perform next."
+msgstr "選擇下次要執行的熱同步種類。"
+
+#: kpilot/kpilot.cc:518
+msgid ""
+"Select the kind of HotSync to perform next. This applies only to the next "
+"HotSync; to change the default, use the configuration dialog."
+msgstr "選擇下次要執行的熱同步種類。這只在下次熱同步時套用。如果要改變預設值,請到設定對話框中設定。"
+
+#: kpilot/kpilot.cc:525
+msgid "&HotSync"
+msgstr "熱同步(&H)"
+
+#: kpilot/kpilot.cc:528
+msgid "Next HotSync will be normal HotSync."
+msgstr "下一次熱同步將執行正常熱同步。"
+
+#: kpilot/kpilot.cc:529
+msgid "Tell the daemon that the next HotSync should be a normal HotSync."
+msgstr "告訴守護程式,下次熱同步時應該執行正常的熱同步動作。"
+
+#: kpilot/kpilot.cc:533
+msgid "Full&Sync"
+msgstr "完整同步(&S)"
+
+#: kpilot/kpilot.cc:536
+msgid "Next HotSync will be a FullSync."
+msgstr "下一次熱同步將執行完整同步。"
+
+#: kpilot/kpilot.cc:537
+msgid ""
+"Tell the daemon that the next HotSync should be a FullSync (check data on both "
+"sides)."
+msgstr "告訴守護程式,下次熱同步時應該執行完整同步(檢查兩邊的資料)。"
+
+#: kpilot/kpilot.cc:541
+msgid "&Backup"
+msgstr "備份(&B)"
+
+#: kpilot/kpilot.cc:544 kpilot/kpilot.cc:560
+msgid "Next HotSync will be backup."
+msgstr "下一次熱同步將執行備份。"
+
+#: kpilot/kpilot.cc:545
+msgid ""
+"Tell the daemon that the next HotSync should back up the Handheld to the PC."
+msgstr "告訴守護程式,下次熱同步時應該將掌上型裝置的資料備份到 PC 上。"
+
+#: kpilot/kpilot.cc:549
+msgid "&Restore"
+msgstr "回復(&R)"
+
+#: kpilot/kpilot.cc:552
+msgid "Next HotSync will be restore."
+msgstr "下一次熱同步將執行回復。"
+
+#: kpilot/kpilot.cc:553
+msgid ""
+"Tell the daemon that the next HotSync should restore the Handheld from data on "
+"the PC."
+msgstr "告訴守護程式,下次熱同步時應該將 PC 上的備份資料回復到掌上型裝置上。"
+
+#: kpilot/kpilot.cc:561
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the Handheld to "
+"the PC, overwriting entries on the PC."
+msgstr "告訴守護程式,下次熱同步時應該將掌上型裝置的所有資料複製到 PC 上,並覆寫在 PC 上現有的項目。"
+
+#: kpilot/kpilot.cc:569
+msgid "Next HotSync will copy PC to Handheld."
+msgstr "下一次熱同步將從 PC 複製到掌上型裝置。"
+
+#: kpilot/kpilot.cc:570
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the PC to the "
+"Handheld, overwriting entries on the Handheld."
+msgstr "告訴守護程式,下次熱同步時應該將 PC 上的所有資料複製到掌上型裝置上,並覆寫在掌上型裝置上現有的項目。"
+
+#: kpilot/kpilot.cc:577
+msgid "&List Only"
+msgstr "只列出(&L)"
+
+#: kpilot/kpilot.cc:580
+msgid "Next HotSync will list databases."
+msgstr "下一次熱同步將只列出資料庫。"
+
+#: kpilot/kpilot.cc:581
+msgid ""
+"Tell the daemon that the next HotSync should just list the files on the "
+"Handheld and do nothing else."
+msgstr "告訴守護程式,下次熱同步時只要列出在掌上型清單中的檔案即可。"
+
+#: kpilot/kpilot.cc:588
+msgid "Rese&t Link"
+msgstr "重置連結(&T)"
+
+#: kpilot/kpilot.cc:591
+msgid "Reset the device connection."
+msgstr "重置與裝置的連結。"
+
+#: kpilot/kpilot.cc:592
+msgid "Try to reset the daemon and its connection to the Handheld."
+msgstr "試著重置守護程式及與掌上型裝置的連結。"
+
+#: kpilot/kpilot.cc:597
+msgid "Quit KPilot, (and stop the daemon if configured that way)."
+msgstr "離開 KPilot(並依據設定決定是否停止守護程式)。"
+
+#: kpilot/kpilot.cc:613
+msgid "Configuration &Wizard..."
+msgstr "組態精靈(&W)..."
+
+#: kpilot/kpilot.cc:616
+msgid "Configure KPilot using the configuration wizard."
+msgstr "使用組態精靈來設定 KPilot。"
+
+#: kpilot/kpilot.cc:851
+msgid ""
+"The library containing the configuration wizard for KPilot could not be loaded, "
+"and the wizard is not available. Please try to use the regular configuration "
+"dialog."
+msgstr "無法載入 KPilot 組態精靈的函式庫,因此無法啟動精靈。請使用設定對話框。"
+
+#: kpilot/kpilot.cc:854
+msgid "Wizard Not Available"
+msgstr "無法使用精靈"
+
+#: kpilot/kpilot.cc:898
+msgid "Changed username to `%1'."
+msgstr "變更使用者名稱為 %1。"
+
+#: kpilot/kpilot.cc:927
+msgid ""
+"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
+"busy)."
+msgstr "目前無法執行 KPilot 組態精靈(KPilot 的使用者介面正在忙碌中)。"
+
+#: kpilot/kpilot.cc:951
+msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
+msgstr "目前無法設定 KPilot(KPilot 的使用者介面正在忙碌中)。"
+
+#: kpilot/kpilot.cc:991
+msgid "Setup the Pilot device, conduits and other parameters"
+msgstr "設定 Pilot 裝置、導管與其他參數"
+
+#: kpilot/kpilot.cc:1015
+msgid "KPilot"
+msgstr "KPilot"
+
+#: kpilot/kpilot.cc:1030 kpilot/kpilot.cc:1032
+msgid "Core and conduits developer"
+msgstr "核心與導管開發者"
+
+#: kpilot/kpilot.cc:1034
+msgid "VCal conduit"
+msgstr "VCal 導管"
+
+#: kpilot/kpilot.cc:1035
+msgid "Abbrowser conduit"
+msgstr "Abbrowser 導管"
+
+#: kpilot/kpilot.cc:1036
+msgid "Expenses conduit"
+msgstr "Expense 導管"
+
+#: kpilot/kpilot.cc:1037
+msgid "Notepad conduit, Bugfixer"
+msgstr "筆記本導管,錯誤修正"
+
+#: kpilot/kpilot.cc:1041
+msgid "XML GUI"
+msgstr "XML 使用者介面"
+
+#: kpilot/kpilot.cc:1044
+msgid ".ui files"
+msgstr ".ui 檔"
+
+#: kpilot/kpilot.cc:1046
+msgid "Bugfixer, coolness"
+msgstr "錯誤修正"
+
+#: kpilot/kpilot.cc:1048
+msgid "VCalconduit state machine, CMake"
+msgstr "VCalconduit 狀態機器,CMake"
+
+#: kpilot/fileInstaller.cc:109
+#, c-format
+msgid "Cannot install %1"
+msgstr "無法安裝 %1"
+
+#: kpilot/fileInstaller.cc:110
+msgid ""
+"Only PalmOS database files (like *.pdb and *.prc) can be installed by the file "
+"installer."
+msgstr "檔案安裝器只能安裝 PalmOS 資料庫檔案(如 *.pdb 與 *.prc)。"
+
+#: kpilot/main-test.cc:66
+msgid "Path to Pilot device node"
+msgstr "Pilot 裝置路徑"
+
+#: kpilot/main-test.cc:69
+msgid "List DBs"
+msgstr "列出資料庫"
+
+#: kpilot/main-test.cc:71
+msgid "Backup Pilot to <dest dir>"
+msgstr "備份 Pilot 到【目標目錄】"
+
+#: kpilot/main-test.cc:73
+msgid "Restore Pilot from backup"
+msgstr "從備份還原 Pilot"
+
+#: kpilot/main-test.cc:76
+msgid "Run conduit from desktop file <filename>"
+msgstr "從 desktop 檔案 <filename> 中執行導管"
+
+#: kpilot/main-test.cc:80
+msgid "Run a specific check (with the device)"
+msgstr "(對裝置)執行特定的檢查"
+
+#: kpilot/main-test.cc:83
+msgid "Show KPilot configuration information"
+msgstr "顯示 KPilot 設定資訊"
+
+#: kpilot/main-test.cc:86
+msgid "Set the debug level"
+msgstr "設定除錯等級"
+
+#: kpilot/main-test.cc:94
+msgid "*Really* run the conduit, not in test mode."
+msgstr "【實際】執行導管,而非測試模式。"
+
+#: kpilot/main-test.cc:98
+msgid "Run the conduit in file-test mode."
+msgstr "以檔案測試模式執行導管。"
+
+#: kpilot/main-test.cc:101
+msgid "Copy Pilot to Desktop."
+msgstr "複製 Pilot 到桌面。"
+
+#: kpilot/main-test.cc:104
+msgid "Copy Desktop to Pilot."
+msgstr "複製桌面到.Pilot。"
+
+#: kpilot/main-test.cc:107
+msgid "Repeated perform action - only useful for --list"
+msgstr "重複執行動作,只對 --list 有用"
+
+#: kpilot/main-test.cc:347
+msgid "KPilotTest"
+msgstr "KPilotTest"
+
+#: kpilot/main-test.cc:352
+msgid "KPilot Maintainer"
+msgstr "KPilot 維護者"
+
+#. i18n: file ./conduits/null/setup_base.ui line 68
+#: kpilot/main-test.cc:357 rc.cpp:6 rc.cpp:21 rc.cpp:33 rc.cpp:78 rc.cpp:207
+#: rc.cpp:222 rc.cpp:304 rc.cpp:592 rc.cpp:745 rc.cpp:835 rc.cpp:844
+#: rc.cpp:910
+#, no-c-format
+msgid "General"
+msgstr "一般"
+
+#: kpilot/main-test.cc:359
+msgid "Conduit Actions"
+msgstr "導管動作"
+
+#: kpilot/addressWidget.cc:187
+msgid "There are still %1 address editing windows open."
+msgstr "目前仍開著 %1 地址編輯視窗。"
+
+#: kpilot/addressWidget.cc:191
+#, c-format
+msgid ""
+"_n: There is still an address editing window open.\n"
+"There are still %n address editing windows open."
+msgstr "目前仍開著 %n 個地址編輯視窗。"
+
+#: kpilot/addressWidget.cc:224
+msgid "<qt>Select the category of addresses to display here.</qt>"
+msgstr "<qt>選擇要在此顯示的地址類別。</qt>"
+
+#: kpilot/addressWidget.cc:237
+msgid ""
+"<qt>This list displays all the addresses in the selected category. Click on one "
+"to display it to the right.</qt>"
+msgstr "<qt>這個清單顯示所選取的類別中的所有地址。點選其中一個,可以在右邊顯示。</qt>"
+
+#: kpilot/addressWidget.cc:241
+msgid "Address info:"
+msgstr "地址資訊:"
+
+#: kpilot/addressWidget.cc:255
+msgid "<qt>You can edit an address when it is selected.</qt>"
+msgstr "<qt>您可以選取地址並編輯。</qt>"
+
+#: kpilot/addressWidget.cc:263
+msgid "<qt>Add a new address to the address book.</qt>"
+msgstr "<qt>新增地址到通訊錄中。</qt>"
+
+#: kpilot/addressWidget.cc:264
+msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉新增功能。</i></qt>"
+
+#: kpilot/addressWidget.cc:274
+msgid "<qt>Delete the selected address from the address book.</qt>"
+msgstr "<qt>從通訊錄中刪除所選取的地址。</qt>"
+
+#: kpilot/addressWidget.cc:277
+msgid ""
+"_: Export addresses to file\n"
+"Export..."
+msgstr "匯出..."
+
+#: kpilot/addressWidget.cc:281
+msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
+msgstr "<qt>將所選取類別中所有的位置以 CSV 格式匯出。</qt>"
+
+#: kpilot/addressWidget.cc:480
+msgid ""
+"You cannot add addresses to the address book until you have done a HotSync at "
+"least once to retrieve the database layout from your Pilot."
+msgstr "您必須至少執行一次熱同步,從您的 Pilot 上取得資料庫佈局之後,您才能夠開始新增地址。"
+
+#: kpilot/addressWidget.cc:483
+msgid "Cannot Add New Address"
+msgstr "無法新增地址"
+
+#: kpilot/addressWidget.cc:677
+msgid "Export All Addresses"
+msgstr "匯出所有的地址"
+
+#: kpilot/addressWidget.cc:678
+#, c-format
+msgid "Export Address Category %1"
+msgstr "匯出地址類別 %1"
+
+#: kpilot/addressWidget.cc:696
+msgid "The file <i>%1</i> exists. Overwrite?"
+msgstr "檔案 <i>%1</i> 已存在。要覆寫嗎?"
+
+#: kpilot/addressWidget.cc:697
+msgid "Overwrite File?"
+msgstr "覆寫檔案?"
+
+#: kpilot/addressWidget.cc:710
+msgid "The file <i>%1</i> could not be opened for writing."
+msgstr "檔案 <i>%1</i> 無法開啟以寫入。"
+
+#. i18n: file ./conduits/null/setup_base.ui line 33
+#: rc.cpp:3 rc.cpp:841
+#, no-c-format
+msgid "Null-Conduit Options"
+msgstr "虛擬導管選項"
+
+#. i18n: file ./conduits/null/setup_base.ui line 85
+#: rc.cpp:9 rc.cpp:847
+#, no-c-format
+msgid "KPilot was here."
+msgstr "KPilot 在此。"
+
+#. i18n: file ./conduits/null/setup_base.ui line 88
+#: rc.cpp:12 rc.cpp:850
+#, no-c-format
+msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
+msgstr "<qt>在此輸入要新增到您的 Pilot 上的同步紀錄的訊息。</qt>"
+
+#. i18n: file ./conduits/null/setup_base.ui line 96
+#: rc.cpp:15 rc.cpp:853
+#, no-c-format
+msgid "&Log message:"
+msgstr "紀錄訊息(&L):"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 33
+#: rc.cpp:18
+#, no-c-format
+msgid "Memofile Conduit Options"
+msgstr "備忘導管選項"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 96
+#: rc.cpp:24
+#, no-c-format
+msgid "Sync private records:"
+msgstr "同步私人紀錄:"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 104
+#: rc.cpp:27
+#, no-c-format
+msgid "Memos directory:"
+msgstr "備忘目錄:"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 115
+#: rc.cpp:30
+#, no-c-format
+msgid "Select the directory you want to store your PDA's memos in"
+msgstr "選擇您要儲存您的 PDA 備忘錄的目錄"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 63
+#: rc.cpp:36 rc.cpp:42
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking the file picker button, the location and "
+"file name of the output file used to store the handheld's system "
+"information.</qt>"
+msgstr "<qt>請在此輸入要儲存掌上型裝置系統資訊的輸出檔名與位置,或直接點選檔案挑選器按鈕來挑選。</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 71
+#: rc.cpp:39
+#, no-c-format
+msgid "Output &file:"
+msgstr "輸出檔案(&F):"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 85
+#: rc.cpp:45
+#, no-c-format
+msgid "Type of Output"
+msgstr "輸出類型"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 96
+#: rc.cpp:48
+#, no-c-format
+msgid "&HTML"
+msgstr "HTML(&H)"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 102
+#: rc.cpp:51
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a HTML "
+"document.</qt>"
+msgstr "<qt>選擇此選項,則會將系統資訊輸出到 HTML 文件中。</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 110
+#: rc.cpp:54
+#, no-c-format
+msgid "Te&xt file"
+msgstr "文字檔(&X)"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 113
+#: rc.cpp:57
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a text "
+"document.</qt>"
+msgstr "<qt>選擇此選項,則會將系統資訊輸出到文字檔中。</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 124
+#: rc.cpp:60
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking on the file picker button, the location "
+"of the template to be used if you select the Custom template option.</qt>"
+msgstr "<qt>若您選擇使用自訂樣本,請在此輸入您要使用的樣本位置,或直接點選檔案挑選器按鈕來挑選。</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 132
+#: rc.cpp:63
+#, no-c-format
+msgid "&Custom template:"
+msgstr "自訂樣本(&C):"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 135
+#: rc.cpp:66
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as defined by a "
+"custom template. Enter the location of the template in the edit box, or select "
+"it clicking on the file picker button.</qt>"
+msgstr "<qt>選擇此選項,以使用自訂樣本來輸出系統資訊。您可以在此輸入您要使用的樣本位置,或直接點選檔案挑選器按鈕來挑選。</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 147
+#: rc.cpp:69
+#, no-c-format
+msgid "Parts Included"
+msgstr "要引入的部份"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 173
+#: rc.cpp:72
+#, no-c-format
+msgid "Output Type"
+msgstr "輸出類型"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 189
+#: rc.cpp:75
+#, no-c-format
+msgid ""
+"<qt>Check on this list the types of information about your system and handheld "
+"you want to display in the output file.</qt>"
+msgstr "<qt>在此清單上選擇您打算輸出到檔案中的掌上型裝置的系統資訊類型。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 49
+#: rc.cpp:81
+#, no-c-format
+msgid "Sync"
+msgstr "同步"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 52
+#: rc.cpp:84
+#, no-c-format
+msgid "Select how often AvantGo should be synchronised"
+msgstr "選擇 AvantGo 多久應該同步一次"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 72
+#: rc.cpp:87
+#, no-c-format
+msgid "&Every sync"
+msgstr "每次熱同步時(&E)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 78
+#: rc.cpp:90
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync. To "
+"perform a successful synchronization, you need to have access to the MAL server "
+"during the HotSync.</qt>"
+msgstr "<qt>選擇此選項,則在每次進行熱同步時會與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 86
+#: rc.cpp:93
+#, no-c-format
+msgid "Once per &hour"
+msgstr "每小時一次(&H)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 92
+#: rc.cpp:96
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one hour after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一小時的熱同步動作時,會再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL "
+"伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 100
+#: rc.cpp:99
+#, no-c-format
+msgid "Once a &day"
+msgstr "每天一次(&D)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 103
+#: rc.cpp:102
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one day after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一天的熱同步動作時,會再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL "
+"伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 111
+#: rc.cpp:105
+#, no-c-format
+msgid "Once a &week"
+msgstr "每週一次(&W)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 114
+#: rc.cpp:108
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one week after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一週的熱同步動作時,會再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL "
+"伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 122
+#: rc.cpp:111
+#, no-c-format
+msgid "Once a &month"
+msgstr "每個月一次(&M)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 125
+#: rc.cpp:114
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one month after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一個月的熱同步動作時,會再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL "
+"伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 154
+#: rc.cpp:117
+#, no-c-format
+msgid "Proxy"
+msgstr "代理伺服器"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 168
+#: rc.cpp:120
+#, no-c-format
+msgid "Proxy Type"
+msgstr "代理伺服器類型"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 185
+#: rc.cpp:123
+#, no-c-format
+msgid "&No proxy"
+msgstr "不使用代理伺服器(&N)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 191
+#: rc.cpp:126
+#, no-c-format
+msgid ""
+"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
+"this option if you connect to the internet directly.</qt>"
+msgstr "<qt>選擇此選項的話,您的 KPilot 不會使用代理伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 199
+#: rc.cpp:129
+#, no-c-format
+msgid "&HTTP proxy"
+msgstr "HTTP 代理伺服器(&H)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 202
+#: rc.cpp:132
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
+msgstr "<qt>選擇此選項的話,您的 KPilot 會使用 HTTP 代理伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 210
+#: rc.cpp:135
+#, no-c-format
+msgid "&SOCKS proxy"
+msgstr "SOCKS 代理伺服器(&S)"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 213
+#: rc.cpp:138
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
+msgstr "<qt>選擇此選項的話,您的 KPilot 會使用 SOCKS 代理伺服器。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 226
+#: rc.cpp:141
+#, no-c-format
+msgid "Server Information"
+msgstr "伺服器資訊"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 260
+#: rc.cpp:144 rc.cpp:195
+#, no-c-format
+msgid "Custom &port:"
+msgstr "自訂連接埠(&P):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 263
+#: rc.cpp:147
+#, no-c-format
+msgid "Check this box to use a non-standard proxy port."
+msgstr "勾選此選項以使用一個非標準的代理伺服器連接埠。"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 271
+#: rc.cpp:150
+#, no-c-format
+msgid "Ser&ver name:"
+msgstr "伺服器名稱(&V):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 277
+#: rc.cpp:153 rc.cpp:156
+#, no-c-format
+msgid ""
+"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy server "
+"to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar.com</i> "
+"or <i>http://foo.bar.com:8080</i>).</qt>"
+msgstr ""
+"<qt>如果您選取 HTTP 或 SOCKS 伺服器,請在此輸入伺服器的位址,格式為 <i>foo.bar.com</i>(而不是 <i>"
+"http://foo.bar.com</i> 或 <i>http://foo.bar.com:8080</i>)。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 305
+#: rc.cpp:159
+#, no-c-format
+msgid ""
+"<qt>Enter the port you want KPilot to use when connecting to your proxy server "
+"here.</qt>"
+msgstr "<qt>輸入 KPilot 連線到代理伺服器時使用的連接埠。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 316
+#: rc.cpp:162
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your password here.</qt>"
+msgstr "<qt>如果您的代理伺服器需要認證,請在使輸入您的密碼。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 324
+#: rc.cpp:165 rc.cpp:174
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your username here.</qt>"
+msgstr "<qt>如果您的代理伺服器需要認證,請在此輸入您的使用者名稱。</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 332
+#: rc.cpp:168 rc.cpp:198
+#, no-c-format
+msgid "&Password:"
+msgstr "密碼(&P):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 343
+#: rc.cpp:171 rc.cpp:201
+#, no-c-format
+msgid "&User name:"
+msgstr "使用者名稱(&U):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 371
+#: rc.cpp:177 rc.cpp:183
+#, no-c-format
+msgid ""
+"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
+"separated with commas, e.g: "
+"<br><i>localhost,127.0.0.1,.lan</i><qt>"
+msgstr ""
+"<qt>在此輸入不需要使用代理伺服器的 MAL 伺服器,以逗號分隔。例如:"
+"<br><i>localhost,127.0.0.1,.lan</i>。<qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 379
+#: rc.cpp:180
+#, no-c-format
+msgid "N&o proxy for:"
+msgstr "不使用代理伺服器的清單(&O):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 414
+#: rc.cpp:186
+#, no-c-format
+msgid "MAL Server"
+msgstr "MAL 伺服器"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 434
+#: rc.cpp:189
+#, no-c-format
+msgid "MAL Server Information"
+msgstr "MAL 伺服器資訊"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 451
+#: rc.cpp:192
+#, no-c-format
+msgid "&MAL server name:"
+msgstr "MAL 伺服器名稱(&M):"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 574
+#: rc.cpp:204
+#, no-c-format
+msgid ""
+"<qt>There is currently <b>no way to set server parameters on the desktop</b>"
+"; you need to use the <i>MobileLink</i> or <i>AGConnect</i> "
+"application on the handheld device. </qt>"
+msgstr ""
+"<qt>目前沒有任何方法可在桌面上設定伺服器資訊。您必須使用掌上型裝置裡的 <i>MobileLink</i> 或 <i>AGConnect</i>。</qt>"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 45
+#: rc.cpp:210
+#, no-c-format
+msgid "Delete KNote when Pilot memo is deleted"
+msgstr "當刪除 Pilot 備忘時刪除 KNote"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 51
+#: rc.cpp:213
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes automatically when "
+"the corresponding Pilot memo is deleted. Use this option with care, as the "
+"notes you want to keep in the handheld and in the desktop are not necessarily "
+"the same.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,您刪除 Pilot 備忘的時候,會自動刪除 KNotes "
+"上相關聯的備忘。請小心使用此選項,因為您要保存在掌上型裝置的備忘跟您想保存在桌面上的備忘不見得一樣。</qt>"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 59
+#: rc.cpp:216
+#, no-c-format
+msgid "Suppress delete-confirmation in KNotes"
+msgstr "刪除 KNotes 備忘時不需確認"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 62
+#: rc.cpp:219
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes, without "
+"confirmation, when the corresponding Pilot memo is deleted. Use this option "
+"only if you want to keep the same notes in the handheld and in the PC.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,在刪除 Pilot 備忘的同時要刪除相關 KNotes 備忘的話,將不會與您確認。除非您確定您要在掌上型裝置與您的 PC "
+"中保存同樣的備忘,否則請不要使用此選項。</qt>"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 63
+#: rc.cpp:225
+#, no-c-format
+msgid "Direction"
+msgstr "方向"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 80
+#: rc.cpp:228
+#, no-c-format
+msgid "Set the &handheld time from the time on the PC"
+msgstr "依據 PC 時間設定掌上型裝置的時間(&H)"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 86
+#: rc.cpp:231
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the PC time on both.</qt>"
+msgstr "<qt>選取此選項的話,會根據 PC 上的時間來同步掌上型裝置的時間。</qt>"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 97
+#: rc.cpp:234
+#, no-c-format
+msgid "Set the &PC time from the time on the handheld"
+msgstr "依據掌上型裝置的時間設定 PC 的時間(&H)"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 100
+#: rc.cpp:237
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the handheld time on both.</qt>"
+msgstr "<qt>選取此選項的話,會根據掌上型裝置上的時間來同步 PC 上的時間。</qt>"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 110
+#: rc.cpp:240
+#, no-c-format
+msgid ""
+"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so this "
+"conduit will be skipped for handhelds that run either of these operating "
+"systems.</qt>"
+msgstr "<qt>PalmOS 3.25 與 3.3 版不支援設定系統時間,因此此導管在這兩個版本的作業系統上將被忽略。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 18
+#: rc.cpp:243 rc.cpp:246
+#, no-c-format
+msgid "KPilot Custom Fields"
+msgstr "KPilot 自訂欄位"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 35
+#: rc.cpp:249
+#, no-c-format
+msgid ""
+"On your handheld, each address also provides four custom fields for your "
+"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
+"just store them as a custom field on your PC with no special meaning. In the "
+"last case, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+"在您的掌上型裝置上,每個位址會提供四個自訂欄位給您個人使用。KPilot "
+"可以將這些欄位與生日、網址、即時通訊地址同步,或是單純儲存成自訂的值。在單純儲存成自訂值的狀況下,您可以在此修改它的值。不過要注意的是,對其它設定來講,此地輸入"
+"的值將沒有任何作用。"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 46
+#: rc.cpp:252
+#, no-c-format
+msgid "Custom &3:"
+msgstr "自訂 3(&3):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 52
+#: rc.cpp:255 rc.cpp:264
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the third custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr "<qt>在此編輯或輸入第三個自訂欄位的值。若您使用 KPilot,您可以將這些值與掌上型裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 60
+#: rc.cpp:258
+#, no-c-format
+msgid "Custom &4:"
+msgstr "自訂 4(&4):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 66
+#: rc.cpp:261 rc.cpp:270
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr "<qt>在此編輯或輸入第四個自訂欄位的值。若您使用 KPilot,您可以將這些值與掌上型裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 82
+#: rc.cpp:267 rc.cpp:276
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the second custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr "<qt>在此編輯或輸入第二個自訂欄位的值。若您使用 KPilot,您可以將這些值與掌上型裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 98
+#: rc.cpp:273
+#, no-c-format
+msgid "Custom &2:"
+msgstr "自訂 2(&2):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 112
+#: rc.cpp:279
+#, no-c-format
+msgid "Custom &1:"
+msgstr "自訂 1(&1):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 118
+#: rc.cpp:282 rc.cpp:285
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the first custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr "<qt>在此編輯或輸入第一個自訂欄位的值。若您使用 KPilot,您可以將這些值與掌上型裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 142
+#: rc.cpp:288
+#, no-c-format
+msgid ""
+"If you let KPilot sync the handheld's custom fields as custom fields on the PC, "
+"you can change the values here. Note, however, that for all other settings the "
+"values entered here will have no effect."
+msgstr ""
+"如果您打算使用 KPilot 將掌上型裝置裡的自訂欄位同步為 PC "
+"上的自訂欄位,您可以在此變更這些值。不過要注意的是,對其它設定來講,此地輸入的值將沒有任何作用。"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 158
+#: rc.cpp:291
+#, no-c-format
+msgid "KPilot's Private (meta-sync) Settings"
+msgstr "KPilot 的私人(meta-sync)設定"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 169
+#: rc.cpp:294
+#, no-c-format
+msgid "Record&ID:"
+msgstr "紀錄代碼(&I):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 180
+#: rc.cpp:297
+#, no-c-format
+msgid "Sync &flag:"
+msgstr "同步旗標(&F):"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 226
+#: rc.cpp:300
+#, no-c-format
+msgid ""
+"These values indicate the state of the record for KPilot, and connect an entry "
+"on the handheld with an entry on the PC.\n"
+"Do NOT change these values: doing so will almost certainly result in data loss "
+"when you next do a sync."
+msgstr "這些值表示 KPilot 的紀錄狀態,並將 PC 上的項目與掌上型裝置的項目連接起來。請不要變更這些值,如此會導致在下一次同步時資料遺失。"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 66
+#: rc.cpp:307 rc.cpp:913
+#, no-c-format
+msgid "Sync Destination"
+msgstr "同步目的地"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 77
+#: rc.cpp:310
+#, no-c-format
+msgid "&Standard addressbook"
+msgstr "標準通訊錄(&S)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 80
+#: rc.cpp:313
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with KDE's standard addressbook (i.e. the "
+"addressbook that you edit in KAddressBook, and which you use in KMail)</qt>"
+msgstr "<qt>選擇此選項的話,會與 KDE 的標準通訊錄(也就是 KAddressBook 與 KMail 中使用的通訊錄)同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 91
+#: rc.cpp:316
+#, no-c-format
+msgid "vCard &file:"
+msgstr "vCard 檔案(&F):"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 94
+#: rc.cpp:319
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific address book file, instead of the "
+"standard KDE address book. This file must be in the vCard format (.vcf). Type "
+"the location of this file in the edit box or select it clicking the file picker "
+"button.</qt>"
+msgstr ""
+"<qt>選擇此選項的話,會使用特別的通訊錄檔案,而不使用標準 KDE 通訊錄來同步。這個檔必須是 vCard "
+"格式(.vcf)。您可以在此輸入此檔案的位置,或直接點選檔案挑選器按鈕來挑選。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 113
+#: rc.cpp:322
+#, no-c-format
+msgid ""
+"<qt>Enter the vCard file name here or select it by clicking the file picker "
+"button. vCard is a standard format for exchanging contact information. </qt>"
+msgstr "<qt>您可以在此輸入 vCard 檔案的名稱,或直接點選檔案挑選器按鈕來挑選。vCard 是交換聯絡人資訊時的標準格式。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 123
+#: rc.cpp:325
+#, no-c-format
+msgid "Store &archived records in the KDE addressbook"
+msgstr "在 KDE 通訊錄中儲存已歸檔的紀錄(&A)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 126
+#: rc.cpp:328
+#, no-c-format
+msgid ""
+"<qt>If you delete an address on your handheld, you can determine if it should "
+"be archived on the PC. If you check that and this checkbox, the address will be "
+"added to your addressbook, but no longer synchronized with the handheld.</qt>"
+msgstr ""
+"<qt>如果您從您的掌上型裝置中刪除一個位址,您可以決定是否要將它歸檔到 PC "
+"上。如果您勾選此選項,則此位址會被加到您的通訊錄中,但不會再同步到您的掌上型裝置中。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 136
+#: rc.cpp:331 rc.cpp:703 rc.cpp:938
+#, no-c-format
+msgid "Conflicts"
+msgstr "衝突"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 166
+#: rc.cpp:337 rc.cpp:941 rc.cpp:1049
+#, no-c-format
+msgid "Conflict &resolution:"
+msgstr "解決衝突(&R):"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 172
+#: rc.cpp:340 rc.cpp:364
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
+"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
+"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC 中都有修改的項目)。可用的選項包括:「使用 KPilot 全域設定」會直接使用在 "
+"KPilot 熱同步設定中的設定;「詢問使用者」則會每次都詢問使用者的意見;「不做任何事」就是維持原狀;還有「PC "
+"覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,最後「兩個項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 178
+#: rc.cpp:343 rc.cpp:944
+#, no-c-format
+msgid "Use KPilot's Global Setting"
+msgstr "使用 KPilot 全域設定"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 183
+#: rc.cpp:346 rc.cpp:947 rc.cpp:1028
+#, no-c-format
+msgid "Ask User"
+msgstr "詢問使用者"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 188
+#: rc.cpp:349 rc.cpp:950 rc.cpp:1031
+#, no-c-format
+msgid "Do Nothing"
+msgstr "不做任何事"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 193
+#: rc.cpp:352 rc.cpp:953 rc.cpp:1034
+#, no-c-format
+msgid "Handheld Overrides"
+msgstr "掌上型裝置覆寫"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 198
+#: rc.cpp:355 rc.cpp:956 rc.cpp:1037
+#, no-c-format
+msgid "PC Overrides"
+msgstr "PC 覆寫"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 203
+#: rc.cpp:358 rc.cpp:959 rc.cpp:1040
+#, no-c-format
+msgid "Values From Last Sync (if possible)"
+msgstr "最後一次同步的值(可以的話)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 208
+#: rc.cpp:361 rc.cpp:962 rc.cpp:1043
+#, no-c-format
+msgid "Use Both Entries"
+msgstr "兩個項目都使用"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 226
+#: rc.cpp:367
+#, no-c-format
+msgid ""
+"<p>Select the default action if an event was modified on both sides here. </p>"
+msgstr "<p>在此選擇事件在兩邊變更後的預設動作。</p>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 258
+#: rc.cpp:370
+#, no-c-format
+msgid "Fields"
+msgstr "欄位"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 275
+#: rc.cpp:373
+#, no-c-format
+msgid "Handheld other phone:"
+msgstr "掌上型裝置中的其他電話欄位:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 278
+#: rc.cpp:376 rc.cpp:403
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"&quot;Other&quot; phone here.</qt>"
+msgstr "<qt>選擇 Pilot 裡的「其他」電話要儲存在 KAddressBook 裡的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 284
+#: rc.cpp:379
+#, no-c-format
+msgid "Other Phone"
+msgstr "其他電話"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 289
+#: rc.cpp:382
+#, no-c-format
+msgid "Assistant"
+msgstr "助理"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 294
+#: rc.cpp:385 rc.cpp:430
+#, no-c-format
+msgid "Business Fax"
+msgstr "工作傳真"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 299
+#: rc.cpp:388
+#, no-c-format
+msgid "Car Phone"
+msgstr "車上電話"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 304
+#: rc.cpp:391
+#, no-c-format
+msgid "Email 2"
+msgstr "電子郵件地址 2"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 309
+#: rc.cpp:394 rc.cpp:427
+#, no-c-format
+msgid "Home Fax"
+msgstr "家用傳真"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 314
+#: rc.cpp:397
+#, no-c-format
+msgid "Telex"
+msgstr "電報"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 319
+#: rc.cpp:400
+#, no-c-format
+msgid "TTY/TTD Phone"
+msgstr "TTY/TTD 電話"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 342
+#: rc.cpp:406
+#, no-c-format
+msgid "Handheld street address:"
+msgstr "掌上型街道地址:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 345
+#: rc.cpp:409 rc.cpp:418
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's Street "
+"Address here.</qt>"
+msgstr "<qt>選擇 Pilot 中的街道地址要儲存在 KAddressBook 中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 351
+#: rc.cpp:412
+#, no-c-format
+msgid "Preferred, then Home Address"
+msgstr "先使用預設的,然後住家地址"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 356
+#: rc.cpp:415
+#, no-c-format
+msgid "Preferred, then Business Address"
+msgstr "先使用預設的,然後商業地址"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 371
+#: rc.cpp:421
+#, no-c-format
+msgid "Handheld fax:"
+msgstr "掌上型裝置中的傳真欄位:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 374
+#: rc.cpp:424 rc.cpp:433
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Fax number from "
+"the Pilot here.</qt>"
+msgstr "<qt>選擇 Pilot 中的傳真號碼要儲存在 KAddressBook 中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 419
+#: rc.cpp:436
+#, no-c-format
+msgid "Custom Fields"
+msgstr "自訂欄位"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 438
+#: rc.cpp:439
+#, no-c-format
+msgid "Handheld custom field 1:"
+msgstr "掌上型裝置中的自訂欄位 1:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 441
+#: rc.cpp:442 rc.cpp:475
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the first custom field on your handheld.</qt>"
+msgstr "<qt>從這份清單中,選擇您的掌上型裝置中的第一個自訂欄位應該搭配清單中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 449
+#: rc.cpp:445
+#, no-c-format
+msgid "Handheld custom field 2:"
+msgstr "掌上型裝置中的自訂欄位 2:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 452
+#: rc.cpp:448 rc.cpp:490
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the second custom field on your handheld.</qt>"
+msgstr "<qt>從這份清單中,選擇您的掌上型裝置中的第二個自訂欄位應該搭配清單中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 460
+#: rc.cpp:451
+#, no-c-format
+msgid "Handheld custom field 3:"
+msgstr "掌上型裝置中的自訂欄位 3:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 463
+#: rc.cpp:454 rc.cpp:505
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the third custom field on your handheld.</qt>"
+msgstr "<qt>從這份清單中,選擇您的掌上型裝置中的第三個自訂欄位應該搭配清單中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 471
+#: rc.cpp:457
+#, no-c-format
+msgid "Handheld custom field 4:"
+msgstr "掌上型裝置中的自訂欄位 4:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 474
+#: rc.cpp:460 rc.cpp:520
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the fourth custom field on your handheld.</qt>"
+msgstr "<qt>從這份清單中,選擇您的掌上型裝置中的第四個自訂欄位應該搭配清單中的哪個欄位。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 480
+#: rc.cpp:463 rc.cpp:478 rc.cpp:493 rc.cpp:508
+#, no-c-format
+msgid "Store as Custom Field"
+msgstr "儲存為自訂欄位"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 485
+#: rc.cpp:466 rc.cpp:481 rc.cpp:496 rc.cpp:511
+#, no-c-format
+msgid "Birthdate"
+msgstr "生日"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 490
+#: rc.cpp:469 rc.cpp:484 rc.cpp:499 rc.cpp:514
+#, no-c-format
+msgid "URL"
+msgstr "網址"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 495
+#: rc.cpp:472
+#, no-c-format
+msgid "IM Address (ICQ, MS, ...)"
+msgstr "即時通訊地址(ICQ,MS,...)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 531
+#: rc.cpp:487 rc.cpp:502 rc.cpp:517
+#, no-c-format
+msgid "IM Address (ICQ, MSN, ...)"
+msgstr "即時通訊地址(ICQ,MSN,...)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 640
+#: rc.cpp:523
+#, no-c-format
+msgid "Date &format:"
+msgstr "日期格式(&F):"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 646
+#: rc.cpp:526 rc.cpp:550
+#, no-c-format
+msgid ""
+"<qt>Select the birthdate format here, if you selected \"birthdate\" for any of "
+"the custom fields above. Possible placeholders are:"
+"<br> %d for the day, %m for the month, %y for the two-digit year, %Y for the "
+"four-digit year. For example, %d.%m.%Y would generate a date like 27.3.1952, "
+"while %m/%d/%y would write the same date as 03/27/52. </qt>"
+msgstr ""
+"<qt>如果您在上方的任一個自訂欄位定義中選擇了「生日」,則您可以在此選擇生日的格式。符號所代表的意義為:"
+"<br> %d:日;%m:月;%y:西元年,二位數;%Y:西元年,四位數。例如,%d.%m.%Y 會將日期顯示為 27.3.1952,而 %m/%d/%y "
+"會將日期顯示為 03/27/52。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 652
+#: rc.cpp:529
+#, no-c-format
+msgid "Locale Settings"
+msgstr "區域化設定"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 657
+#: rc.cpp:532
+#, no-c-format
+msgid "%d.%m.%Y"
+msgstr "%d.%m.%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 662
+#: rc.cpp:535
+#, no-c-format
+msgid "%d.%m.%y"
+msgstr "%d.%m.%y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 667
+#: rc.cpp:538
+#, no-c-format
+msgid "%d/%m/%Y"
+msgstr "%d/%m/%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 672
+#: rc.cpp:541
+#, no-c-format
+msgid "%d/%m/%y"
+msgstr "%d/%m/%y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 677
+#: rc.cpp:544
+#, no-c-format
+msgid "%m/%d/%Y"
+msgstr "%m/%d/%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 682
+#: rc.cpp:547
+#, no-c-format
+msgid "%m/%d/%y"
+msgstr "%m/%d/%y"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 16
+#: rc.cpp:553
+#, no-c-format
+msgid "widget2"
+msgstr "元件2"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 27
+#: rc.cpp:556
+#, no-c-format
+msgid ""
+"The following record was edited both on the handheld and on the PC. Please "
+"choose which values shall be synced:"
+msgstr "以下的紀錄同時在掌上型裝置與 PC 上都有編輯修改過。請選擇要以那個值為主來同步:"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 36
+#: rc.cpp:559
+#, no-c-format
+msgid "Field"
+msgstr "欄位"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 55
+#: rc.cpp:562
+#, no-c-format
+msgid ""
+"<qt>Use this list to resolve, field by field, the conflicts created when a "
+"record was edited both on the handheld and on the PC. For each record, the "
+"different values from the last sync, the handheld and PC are displayed for each "
+"field, allowing you to choose the desired value.</qt>"
+msgstr ""
+"<qt>當某一筆紀錄同時在 PC "
+"與掌上型裝置中修改過的時候,依每個欄位,使用此清單來解決衝突的問題。在每一筆資料的每一個欄位中,都會顯示與上一次同步後不同的值,在掌上型裝置上的值與在 PC "
+"上的值,好讓您選擇想要同步的值。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 63
+#: rc.cpp:565
+#, no-c-format
+msgid ""
+"Line breaks in any of the entries are denoted by a \" | \" (without the "
+"quotes)."
+msgstr "任何項目資料中的斷行都會以 \" | \" 來顯示(但不包括那個 \")。"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 85
+#: rc.cpp:568
+#, no-c-format
+msgid "&Keep Both"
+msgstr "都要保留(&K)"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 88
+#: rc.cpp:571
+#, no-c-format
+msgid ""
+"<qt>Click this button to use both values, resulting in the duplication of the "
+"record.</qt>"
+msgstr "<qt>點擊此按鍵就兩邊都保留,如此會複製一份紀錄。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 96
+#: rc.cpp:574
+#, no-c-format
+msgid "&PC Values"
+msgstr "PC 上的值(&P)"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 99
+#: rc.cpp:577
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the PC values for synchronizing all conflicting "
+"fields in this record.</qt>"
+msgstr "<qt>點擊此按鍵就會使用 PC 上的值來同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 107
+#: rc.cpp:580
+#, no-c-format
+msgid "&Last Sync Values"
+msgstr "最後一次同步的值(&L)"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 110
+#: rc.cpp:583
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the last sync values (old values) for "
+"synchronizing all conflicting fields in this record.</qt>"
+msgstr "<qt>點擊此按鍵就會使用最後一次同步後的值(也就是未變更前的舊值)來同步。</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 118
+#: rc.cpp:586
+#, no-c-format
+msgid "&Handheld Values"
+msgstr "掌上型裝置中的值(&H)"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 121
+#: rc.cpp:589
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the handheld values for synchronizing all "
+"conflicting fields in this record.</qt>"
+msgstr "<qt>點擊此按鍵就會使用掌上型裝置中的值來同步。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 54
+#: rc.cpp:595
+#, no-c-format
+msgid "&Text files:"
+msgstr "文字檔(&T):"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 60
+#: rc.cpp:598 rc.cpp:607
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder used to find and synchronize text files. All files with "
+"extension .txt located in this folder will be synced to Palm DOC databases in "
+"your handheld.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要用於尋找與同步文字檔的資料夾位置,或直接點選檔案挑選器按鈕來挑選。所有在此資料夾中以 .txt 為副檔名的檔案,都會被您掌上型裝置中的 "
+"Palm DOC 資料庫裡的資料同步。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 68
+#: rc.cpp:601
+#, no-c-format
+msgid "Local co&py:"
+msgstr "本地端複製(&P):"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 74
+#: rc.cpp:604
+#, no-c-format
+msgid ""
+"<qt>Check this box if you want to save a copy of the Palm DOC databases (.pdb "
+"files) on your PC.</qt>"
+msgstr "<qt>勾選此選項的話,會儲存一份 Palm DOC 資料庫檔案(*.pdb)到您的 PC 上。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 90
+#: rc.cpp:610
+#, no-c-format
+msgid "Synchronization Mode"
+msgstr "同步模式"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 107
+#: rc.cpp:613
+#, no-c-format
+msgid "Sync only P&C to PDA"
+msgstr "只從 PC 同步到 PDA(&C)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 113
+#: rc.cpp:616
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"not be converted to text files, but texts changed in the PC will be converted "
+"to the Palm DOC databases.</qt>"
+msgstr ""
+"<qt>選取此選項的話,會將您的 PC 中的文字檔變更同步到您的掌上型裝置的 Palm DOC 資料庫中。Palm DOC "
+"資料庫的變更不會轉換為文字檔,但是在 PC 中的變更的文字會被轉換到 Palm DOC 資料庫中。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 121
+#: rc.cpp:619
+#, no-c-format
+msgid "Sync only P&DA to PC"
+msgstr "只從 PDA 同步到 PC(&D)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 124
+#: rc.cpp:622
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the changes made to Palm DOC databases in "
+"your handheld to the PC text files. Palm DOC databases modified in the handheld "
+"will be converted to text files, but texts changed in the PC will not be "
+"converted to the Palm DOC databases.</qt>"
+msgstr ""
+"<qt>選取此選項的話,會將您的掌上型裝置的 Palm DOC 資料庫的變更同步到您的 PC 的文字檔中。Palm DOC 資料庫的變更會轉換為文字檔,但是在 "
+"PC 中的變更的文字不會被轉換到 Palm DOC 資料庫中。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 132
+#: rc.cpp:625
+#, no-c-format
+msgid "Sync &all"
+msgstr "全部同步(&A)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 141
+#: rc.cpp:628
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will be "
+"converted to text files, and texts changed in the PC will be converted to the "
+"Palm DOC databases, keeping both versions in sync.</qt>"
+msgstr ""
+"<qt>選取此選項的話,會將您的掌上型裝置的 Palm DOC 資料庫與您的 PC 的文字檔做雙向同步。Palm DOC 資料庫的變更會轉換為文字檔,在 PC "
+"中的變更的文字也會被轉換到 Palm DOC 資料庫中,讓兩邊的版本保持一致。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 168
+#: rc.cpp:631
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder where copies of the handheld databases are kept (.pdb "
+"files). Local copies are only made if the box is checked as well.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要保存掌上型裝置資料庫檔案(*.pdb)複本的資料夾位置,或直接點選檔案挑選器按鈕來挑選。若同時勾選此選項的話,會順便做複製的動作。</q"
+"t>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 178
+#: rc.cpp:634 rc.cpp:778
+#, no-c-format
+msgid "PC -> Handheld"
+msgstr "PC 到掌上型裝置"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 189
+#: rc.cpp:637 rc.cpp:793
+#, no-c-format
+msgid "&Compress"
+msgstr "壓縮(&C)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 195
+#: rc.cpp:640 rc.cpp:796
+#, no-c-format
+msgid ""
+"Check this box, if the text should be compressed on the handheld to save "
+"memory. Most doc reader on the handheld support compressed texts."
+msgstr "勾選此選項的話,會將掌上型裝置中的文字做壓縮以節省記憶體。大部份在掌上型裝置的文件閱讀器都支援壓縮的功能。"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 198
+#: rc.cpp:643
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC format supports compressing the text to save memory. Check "
+"this box to enable text compression, so the resulting Palm DOC database will "
+"consume about 50% less memory than in uncompressed state. Almost all DOC "
+"readers on the Palm support compressed texts.</qt>"
+msgstr ""
+"<qt>Palm DOC 格式支援壓縮文字以節省記憶體的功能。勾選此選項以開啟此功能,讓 Palm DOC 資料庫可以節省約 50% "
+"左右的記憶體。大部份在掌上型裝置的文件閱讀器都支援壓縮的功能。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 206
+#: rc.cpp:646 rc.cpp:802
+#, no-c-format
+msgid "Convert &bookmarks"
+msgstr "轉換書籤(&B)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 212
+#: rc.cpp:649
+#, no-c-format
+msgid ""
+"<qt>Check this box to enable bookmark creation when converting text files to "
+"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
+"bookmark, it is necessary to to provide the location in the text where the "
+"bookmark should be set and the bookmark title, in at least one of the formats "
+"listed below.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,在轉換文字檔到 Palm DOC "
+"資料庫時會開啟建立書籤的功能。大部份的文件閱讀器都支援書籤。要建立書籤,至少需要以下面列出的一種格式提供書籤設定的位置,以及書籤的標題。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 237
+#: rc.cpp:652 rc.cpp:781
+#, no-c-format
+msgid "&Inline tags in text"
+msgstr "文字中的內含標籤(&I)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 243
+#: rc.cpp:655
+#, no-c-format
+msgid ""
+"Check this box to create bookmarks from inline tags in the text. The inline tag "
+"consist of tags in the form <* bookmarktext *>. The bookmark location is set "
+"using the location of the inline tag in the text, and the name is the text "
+"between the <* and the *>. The inline tag (<*...*>) will be removed from the "
+"text."
+msgstr ""
+"勾選此選項的話,會從文字中的內含標籤來建立書籤。內含標籤包含了此格式 <* bookmarktext *> "
+"的標籤。書籤的位置會用文字中的內含標籤的位置,標題名稱則用 <* 與 *> 間的文字。最後此標籤(<* ... *>)會從文字中移除。"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 251
+#: rc.cpp:658 rc.cpp:775
+#, no-c-format
+msgid "&Encoding:"
+msgstr "編碼(&E):"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 262
+#: rc.cpp:661 rc.cpp:787
+#, no-c-format
+msgid "&Tags at end of text"
+msgstr "文字結束的標籤(&T)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 265
+#: rc.cpp:664
+#, no-c-format
+msgid ""
+"Check this box to convert tags of the form <bookmarkname> "
+"at the end of the text to bookmarks. The text inside the tag (\"bookmarkname\") "
+"will be searched in the text, and whenever found, a bookmark will be set there. "
+"The endtags <...> will then be removed from the end of the text."
+msgstr ""
+"勾選此選項的話,會將文字結尾的 <bookmarkname> "
+"標籤轉換為書籤。它會搜尋在標籤中的文字(\"bookmarkname\"),找到之後會將書籤設定在那裡。最後會將結束標籤 <...> 從文字尾端移除。"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 273
+#: rc.cpp:667 rc.cpp:808
+#, no-c-format
+msgid "Regular &expressions in .bmk file"
+msgstr ".bmk 檔中的正規表示式(&E)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 276
+#: rc.cpp:670
+#, no-c-format
+msgid ""
+"<qt>Check this box to use regular expressions in a file to search the text for "
+"bookmarks. The file should have the same name as the text file, but should end "
+"in .bmk instead of .txt (for instance, the regular expression file for "
+"textname.txt should be textname.bmk). See the documentation for a description "
+"of the format of the bmk file.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,會使用檔案中的正規表示式來搜尋文字以建立書籤。此檔的檔名要與文字檔一樣,但是將副檔名換為 .bmk(例如,textname.txt "
+"檔的書籤正規表示式檔應該要叫做 textname.bmk)。bmk 檔的格式請參考文件說明。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 291
+#: rc.cpp:673 rc.cpp:814
+#, no-c-format
+msgid "Handheld -> PC"
+msgstr "掌上型裝置到 PC"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 319
+#: rc.cpp:676
+#, no-c-format
+msgid "Do not convert, if text unchanged (only bookmarks)"
+msgstr "如果文字未變更(只變更書籤時)就不轉換"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 322
+#: rc.cpp:679
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid syncing the text on the handheld to the PC if you "
+"only changed the bookmarks on the handheld (but not the text).</qt>"
+msgstr "<qt>勾選此選項的話,若您只變更掌上型裝置文件的書籤(但沒有變更文字內容),則不會同步到 PC 上。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 330
+#: rc.cpp:682 rc.cpp:817
+#, no-c-format
+msgid "Convert Bookmarks"
+msgstr "轉換書籤"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 341
+#: rc.cpp:685 rc.cpp:823
+#, no-c-format
+msgid "Do &not convert bookmarks"
+msgstr "不轉換書籤(&N)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 347
+#: rc.cpp:688
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or to "
+"a bookmark file.</qt>"
+msgstr "<qt>勾選此選項以避免將 Palm DOC 書籤轉換為內含標籤或書籤檔。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 355
+#: rc.cpp:691
+#, no-c-format
+msgid "Convert into .bm &file"
+msgstr "轉換為 .bm 檔(&F)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 364
+#: rc.cpp:694
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
+"file, in the bmk format (see more about this format in the documentation). The "
+"resulting bookmark file shares the same filename as the resulting .txt file, "
+"but ends in .bmk instead. This approach creates a clean text file and a "
+"bookmark file.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,則會將 Palm DOC 資料庫書籤以 bmk 格式轉換到不同的檔案中(關於 bmk "
+"格式請參考文件說明)。結果的書籤檔會與文字檔的檔名相同,只有副檔名換成 .bmk。這會建立一個乾淨的文字檔與書籤檔。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 372
+#: rc.cpp:697 rc.cpp:820
+#, no-c-format
+msgid "Convert as &inline tags"
+msgstr "轉換為內含標籤(&I)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 378
+#: rc.cpp:700
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to inline tags, "
+"in the form &lt;* BookmarkName *&gt;. These tags are inserted in the text in "
+"the position marked by the bookmark, and the text inside the tag corresponds to "
+"the bookmark name. Inline tags are easy to create, delete, move and edit.</qt>"
+msgstr ""
+"<qt>勾選此選項會將 Palm DOC 資料庫的書籤轉換為 &lt;* BookmarkName *&gt; "
+"的內含標籤。這些標籤會安插在書籤所標示的位置上,標籤內的文字會使用書籤的名稱。內含標籤比較容易建立、刪除、移動與編輯。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 404
+#: rc.cpp:709
+#, no-c-format
+msgid ""
+"If the same text was changed on the PC and the handheld, which of the two "
+"versions should be used as the new version?"
+msgstr "如果同樣的文字,在 PC 與掌上型裝置中都做了變更,則要以哪個版本為主來同步?"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 407
+#: rc.cpp:712
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, the choice is "
+"between working with the files out of sync, or discarding the changes in one of "
+"them.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您必須選擇要使用哪一邊的版本,或是兩個都不要。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 418
+#: rc.cpp:715
+#, no-c-format
+msgid "&No resolution"
+msgstr "不解決(&N)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 424
+#: rc.cpp:718
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to prevent KPilot from "
+"overwriting your modifications.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則 "
+"KPilot 不會去處理與覆寫您的變更。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 432
+#: rc.cpp:721
+#, no-c-format
+msgid "P&DA overrides"
+msgstr "PDA 覆寫(&D)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 438
+#: rc.cpp:724
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to make the PDA version "
+"overwrite the PC version in case of conflict.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則以 "
+"PDA 的版本為主,PC 端的內容將被同步,原本的變更將被丟棄。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 446
+#: rc.cpp:727
+#, no-c-format
+msgid "P&C overrides"
+msgstr "PC 覆寫(&C)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 452
+#: rc.cpp:730
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to make the PC version overwrite "
+"the PDA version in case of conflict.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則以 "
+"PC 的版本為主,PDA 端的內容將被同步,原本的變更將被丟棄。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 460
+#: rc.cpp:733
+#, no-c-format
+msgid "&Ask the user"
+msgstr "詢問使用者(&A)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 469
+#: rc.cpp:736
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to show the resolution dialog to "
+"let the user decide on a case by case basis.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC "
+"與掌上型裝置同時做的變更合併起來的功能。因此,您必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則會顯示出解決對話框,讓使用者決定要怎麼做。</qt>"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 479
+#: rc.cpp:739
+#, no-c-format
+msgid "&Always show the resolution dialog"
+msgstr "永遠顯示解決對話框(&A)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 482
+#: rc.cpp:742
+#, no-c-format
+msgid ""
+"<qt>Check this box to force the resolution dialog to appear even when there are "
+"no conflicts.</qt>"
+msgstr "<qt>勾選此選項以強制解決對話框出現,即使沒有衝突也一樣。</qt>"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 47
+#: rc.cpp:748
+#, no-c-format
+msgid "&PalmDOC file:"
+msgstr "PalmDOC 檔案(&P):"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 77
+#: rc.cpp:754
+#, no-c-format
+msgid "Convert whole &folders"
+msgstr "轉換整個資料夾(&F)"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 85
+#: rc.cpp:757
+#, no-c-format
+msgid ""
+"Folder where copies of the handheld databases are kept. You can install them to "
+"any PalmOS handheld, and distribute these copies to other people (but beware of "
+"copyright infringement)."
+msgstr "掌上型裝置中的資料庫要複製到哪個資料夾。您可以安裝這些複本到任何 PalmOS 掌上型裝置,並散布這些複本給其它人(不過請小心版權問題)。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 93
+#: rc.cpp:760
+#, no-c-format
+msgid "&Ask before overwriting files"
+msgstr "覆寫檔案前先詢問(&A)"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 101
+#: rc.cpp:763
+#, no-c-format
+msgid "&Verbose messages"
+msgstr "詳細訊息(&V)"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 109
+#: rc.cpp:766
+#, no-c-format
+msgid "Convert Text to PalmDOC"
+msgstr "轉換文字到 PalmDOC"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 117
+#: rc.cpp:769
+#, no-c-format
+msgid "Convert PalmDOC to Text"
+msgstr "轉換 PalmDOC 為文字"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 142
+#: rc.cpp:772
+#, no-c-format
+msgid ""
+"Enter the name of the folder where the text files reside on the PC. All files "
+"with extension .txt will be synced to the handheld."
+msgstr "輸入文字檔要放在 PC 上的資料夾名稱。所有副檔名為 .txt 的檔案都會與掌上型裝置同步。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 236
+#: rc.cpp:784
+#, no-c-format
+msgid ""
+"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be set "
+"at this position, and the text between the <* and the *> "
+"will be used as bookmark name. The <*...*> will be removed from the text."
+msgstr ""
+"當 <* bookmarktext *> 出現在文字的某處時,會在該處設定一個書籤,而 <* 與 *> 間的文字會做為書籤的名稱。最後 <* ... *> "
+"會從文字中移除。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 247
+#: rc.cpp:790
+#, no-c-format
+msgid ""
+"Tags of the form <bookmarkname> at the end of the text will be used to search "
+"the text for the pattern between the < and >. Whenever \"bookmarkname\" appears "
+"in the text, a bookmark will be set there. The endtags <...> "
+"will then be removed from the end of the text."
+msgstr ""
+"放在文字尾端的格式為 <bookmarkname> 的標籤會被用於搜尋在 < 與 > 間的文字。當 \"bookmarkname\" "
+"出現在文字中時,會在該處設置一個書籤。最後 <...> 的標籤會被移除。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 264
+#: rc.cpp:799
+#, no-c-format
+msgid ""
+"The Palm doc format supports compressing the text to save memory. If you check "
+"this box, the text will consume about 50% less memory than in uncompressed "
+"state. Almost all DOC readers on the Palm support compressed texts."
+msgstr ""
+"Palm DOC 格式支援壓縮文字,以節省記憶體。如果您勾選此選項,會節省約 50% 的記憶體。大部份 Palm 上面的文件閱讀器都支援文字壓縮。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 278
+#: rc.cpp:805
+#, no-c-format
+msgid ""
+"Do you want to convert bookmarks? Most doc readers support bookmarks. You have "
+"to provide some information about where the bookmarks should be set and their "
+"titles. Check at least one of the bookmark types below."
+msgstr "您要轉換書籤嗎?大部份的文件閱讀器都支援書籤。您至少需要以下面列出的一種格式提供書籤設定的位置,以及書籤的標題。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 289
+#: rc.cpp:811
+#, no-c-format
+msgid ""
+"Use regular expressions in a file textname.bmk (textname.txt is the filename of "
+"the text) to search the text for bookmarks.See the documentation for a "
+"description of the format of the bmk file."
+msgstr ""
+"使用 textname.bmk 檔(文字檔名為 textname.txt)中的正規表示式來搜尋要做書籤的文字。bmk 檔的格式請參考文件說明。"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 386
+#: rc.cpp:826
+#, no-c-format
+msgid "Convert as &end tags"
+msgstr "轉換為結束標記(&E)"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 394
+#: rc.cpp:829
+#, no-c-format
+msgid "Convert into .bmk &file"
+msgstr "轉換為 .bmk 檔案(&F)"
+
+#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 17
+#: rc.cpp:832
+#, no-c-format
+msgid "Path to the directory to which the pictures should be exported."
+msgstr "圖片要匯出的目錄路徑。"
+
+#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 65
+#: rc.cpp:838
+#, no-c-format
+msgid "Output:"
+msgstr "輸出:"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 107
+#: rc.cpp:856
+#, no-c-format
+msgid "&Databases:"
+msgstr "資料庫(&D):"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 118
+#: rc.cpp:859
+#, no-c-format
+msgid ""
+"<qt>The Null-conduit can be attached to several databases, effectively "
+"preventing them from Syncing. Enter the database names here.</qt>"
+msgstr "<qt>虛擬導管(Null Conduit)可以附加到一些資料庫中,避免它們被同步。請在此輸入資料庫名稱。</qt>"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 143
+#: rc.cpp:862
+#, no-c-format
+msgid "Simulate failure"
+msgstr "模擬失敗"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 146
+#: rc.cpp:865
+#, no-c-format
+msgid "Force the conduit to simulate a failure to perform the HotSync."
+msgstr "強迫導管模擬執行熱同步失敗。"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 34
+#: rc.cpp:868
+#, no-c-format
+msgid "Send Mail"
+msgstr "傳送郵件"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 62
+#: rc.cpp:871
+#, no-c-format
+msgid "Send method:"
+msgstr "傳送方法:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 65
+#: rc.cpp:874 rc.cpp:904
+#, no-c-format
+msgid ""
+"<qt>Select the method KPilot will use to send the mail from your Handheld to "
+"the recipients here. Depending on the method you choose, the other fields in "
+"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
+"method is through KMail.</qt>"
+msgstr ""
+"<qt>請選擇 KPilot 用於傳送您的掌上型裝置發出的郵件的方式。依據您選取的方式不同,其它欄位可能會開啟或關閉。目前僅支援透過 KMail。</qt>"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 73
+#: rc.cpp:877
+#, no-c-format
+msgid "Email address:"
+msgstr "電子郵件地址:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 76
+#: rc.cpp:880 rc.cpp:886
+#, no-c-format
+msgid "<qt>Enter the email address you want to send messages as here.</qt>"
+msgstr "<qt>請輸入您要傳送郵件的收件人電子郵件地址。</qt>"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 84
+#: rc.cpp:883
+#, no-c-format
+msgid "$USER"
+msgstr "$USER"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 95
+#: rc.cpp:889
+#, no-c-format
+msgid "Signature file:"
+msgstr "簽名檔:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 98
+#: rc.cpp:892 rc.cpp:895
+#, no-c-format
+msgid ""
+"<qt>If you want to add a signature file, enter the location of your signature "
+"file (usually, <i>.signature</i>, located in your home folder) here, or select "
+"it clicking the file picker button. The signature file contains the text that "
+"is added to the end of your outgoing mail messages.</qt>"
+msgstr ""
+"<qt>如果您要加入簽名檔,請輸入您簽名檔的位置(通常是您家目錄中的 <i>.signature</i>"
+"),或是透過檔案挑選器挑選。簽名檔內的文字會被附在信件的最後面。</qt>"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 112
+#: rc.cpp:898
+#, no-c-format
+msgid "Do Not Send Mail"
+msgstr "不要傳送郵件"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 117
+#: rc.cpp:901
+#, no-c-format
+msgid "Use KMail"
+msgstr "使用 KMail"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 31
+#: rc.cpp:907
+#, no-c-format
+msgid "Calendar-Conduit Options"
+msgstr "行事曆導管選項"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 105
+#: rc.cpp:916
+#, no-c-format
+msgid "&Standard calendar"
+msgstr "標準行事曆(&S)"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 108
+#: rc.cpp:919
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the calendar specified by the KDE "
+"calendar settings.</qt>"
+msgstr "<qt>選取此選項的話,會與 KDE 行事曆設定中指定的行事曆同步。</qt>"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 119
+#: rc.cpp:922
+#, no-c-format
+msgid "Calendar &file:"
+msgstr "行事曆檔案(&F):"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 122
+#: rc.cpp:925
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific calendar file, instead of the standard "
+"KDE calendar. This file must be in the in the vCalendar or iCalendar format. "
+"Enter the location of this file in the edit box or select it clicking the file "
+"picker button.</qt>"
+msgstr ""
+"<qt>選取此選項以使用指定的行事曆檔案,而不使用標準的 KDE 行事曆。此檔必須是 vCalendar 或 iCalendar "
+"格式。請輸入檔案的位置,或使用檔案挑選器挑選。</qt>"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 141
+#: rc.cpp:928
+#, no-c-format
+msgid ""
+"<qt>Enter here the location and filename of the calendar file or select it "
+"clicking the file picker button. This file must be in the iCalendar or "
+"vCalendar format.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要使用的行事曆檔案的位置,或直接點選檔案挑選器按鈕來挑選。檔案必須是 iCalendar 或 vCalendar 格式。</qt>"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 151
+#: rc.cpp:931
+#, no-c-format
+msgid "Store &archived records in the KDE calendar"
+msgstr "在 KDE 行事曆中儲存歸檔的紀錄(&A)"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 155
+#: rc.cpp:934
+#, no-c-format
+msgid ""
+"When this box is checked, archived records will still\n"
+"be saved in the calendar on the PC."
+msgstr "勾選此選項的話,歸檔的紀錄會被儲存在 PC 端的行事曆中。"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 233
+#: rc.cpp:965
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
+"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
+"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld. Note that this does <i>not</i> "
+"handle double-scheduling conflicts.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC 中都有修改的項目)。可用的選項包括:「使用 KPilot 全域設定」會直接使用在 "
+"KPilot 熱同步設定中的設定;「詢問使用者」則會每次都詢問使用者的意見;「不做任何事」就是維持原狀;還有「PC "
+"覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,最後「兩個項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。要注意的是,這個選項並<i>"
+"不會</i>處理雙重行程(double-scheduling)的衝突。</qt>"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 32
+#: rc.cpp:968
+#, no-c-format
+msgid "&Description:"
+msgstr "描述(&D):"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 54
+#: rc.cpp:971
+#, no-c-format
+msgid "&Note:"
+msgstr "附註(&N):"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 71
+#: rc.cpp:974
+#, no-c-format
+msgid "Ca&tegory:"
+msgstr "類別(&T):"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 90
+#: rc.cpp:977
+#, no-c-format
+msgid "&Priority:"
+msgstr "優先等級(&P):"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 104
+#: rc.cpp:983
+#, no-c-format
+msgid "2"
+msgstr "2"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 109
+#: rc.cpp:986
+#, no-c-format
+msgid "3"
+msgstr "3"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 114
+#: rc.cpp:989
+#, no-c-format
+msgid "4"
+msgstr "4"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 119
+#: rc.cpp:992
+#, no-c-format
+msgid "5"
+msgstr "5"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 147
+#: rc.cpp:995
+#, no-c-format
+msgid "&Completed"
+msgstr "已完成(&C)"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 155
+#: rc.cpp:998
+#, no-c-format
+msgid "Has &end date:"
+msgstr "有結束日期(&E):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 18
+#: rc.cpp:1001 rc.cpp:1058 rc.cpp:1108 rc.cpp:1220 rc.cpp:1313
+#, no-c-format
+msgid "KPilot Options"
+msgstr "KPilot 選項"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 32
+#: rc.cpp:1004
+#, no-c-format
+msgid "Do full sync when chan&ging PCs"
+msgstr "變更 PC 時執行完整同步(&G)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 38
+#: rc.cpp:1007
+#, no-c-format
+msgid ""
+"<qt>Check this box to perform a full sync when your last sync was performed "
+"with another PC or system, to guarantee the completeness of your data.</qt>"
+msgstr "<qt>勾選此選項的話,若您最後一次同步是在另一台 PC 或系統上執行的,則會做一次完整的同步,以保證您資料的完整性。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 44
+#: rc.cpp:1010
+#, no-c-format
+msgid "HotSync (sync all changes)"
+msgstr "熱同步(同步所有變更)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 49
+#: rc.cpp:1013
+#, no-c-format
+msgid "FullSync (sync also unchanged records)"
+msgstr "完整同步(包括未變更的紀錄)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 66
+#: rc.cpp:1022
+#, no-c-format
+msgid ""
+"<qt>Select in this list the synchronization type that KPilot will use as "
+"default. Possible values are:"
+"<br>\"HotSync\", to run all selected conduits, and sync the databases with a "
+"modified flag set, updating the modified records only;"
+"<br>\"FullSync\" to run all selected conduits, and sync all databases, reading "
+"all records, and performing a full backup;"
+"<br>\"Copy PC to handheld\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the PC data to the "
+"handheld;"
+"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the handheld data to "
+"the PC.</qt>"
+msgstr ""
+"<qt>在此清單中選取 KPilot 預設使用的同步方式。可用的選項包括:"
+"<br> 「熱同步」(HotSync)會執行所有選取的導管,並同步更新有變更過的資料庫紀錄。"
+"<br> 「完整同步」(FullSync)會執行所有選取的導管,以及同步所有的資料庫,讀取所有的紀錄,並做完整的備份。"
+"<br> 「從 PC 複製到掌上型裝置」會執行所有的導管,並同步所有的資料庫,但是方向只從 PC 同步到掌上型裝置,而不做兩邊的合併。"
+"<br> 「從掌上型裝置複製到 PC」會執行所有的導管,並同步所有的資料庫,但是方向只從掌上型裝置同步到 PC,而不做兩邊的合併。"
+"<br></qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 74
+#: rc.cpp:1025
+#, no-c-format
+msgid "&Default sync:"
+msgstr "預設同步(&D):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 132
+#: rc.cpp:1046
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are \"Ask User\" "
+"to let you decide case by case, \"Do Nothing\" to allow the entries to be "
+"different, \"PC overrides\", \"Handheld overrides\", \"Use values from last "
+"sync\" and \"Use both entries\" to create a new entry on both the PC and "
+"handheld. Note that the conflict resolution option selected here can be "
+"overridden by conduits that have their own conflict resolution "
+"configuration.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC "
+"中都有修改的項目)。可用的選項包括:「詢問使用者」會每次都詢問使用者的意見;「不做任何事」就是維持原狀;還有「PC "
+"覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,最後「兩個項目都使用」則會在 PC "
+"與掌上型裝置兩邊各產生一個新的項目。要注意的是,若是使用的導管本身就有設定解決衝突的方式,則這裡選取的選項會被忽略。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 159
+#: rc.cpp:1052
+#, no-c-format
+msgid "Do not sync when screensaver is active"
+msgstr "螢幕保護程式啟動時不要同步"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 165
+#: rc.cpp:1055
+#, no-c-format
+msgid ""
+"<qt>Check this box to prevent KPilot from syncing your handheld while the "
+"screensaver is active: this is a security measure to prevent others from "
+"syncing <i>their</i> handhelds with your data. This option must be disabled "
+"when you use a different desktop, since KPilot is not aware of screensavers "
+"other than KDE's.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,會避免讓 KPilot "
+"在螢幕保護程式啟動的期間去同步您的掌上型裝置:這是為了安全性考量,避免其它人用他們自己的掌上型裝置來「竊取」您的資料。不過若是您使用的是不同的桌面系統,則必須關"
+"閉此選項,因為 KPilot 只認得 KDE 的螢幕保護程式。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 33
+#: rc.cpp:1061
+#, no-c-format
+msgid "Exit Options"
+msgstr "離開選項"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 44
+#: rc.cpp:1064
+#, no-c-format
+msgid "S&top KPilot's system tray application on exit"
+msgstr "離開時停止 KPilot 的系統匣應用程式(&T)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 47
+#: rc.cpp:1067
+#, no-c-format
+msgid ""
+"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
+"KPilot started the daemon itself).</qt>"
+msgstr ""
+"<qt>勾選此選項的話,當您離開 KPilot 時,會同時中止 KPilot 守護程式(只在 KPilot 自己啟動守護程式時有效)。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 55
+#: rc.cpp:1070
+#, no-c-format
+msgid "Quit &after HotSync"
+msgstr "熱同步後離開(&A)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 58
+#: rc.cpp:1073
+#, no-c-format
+msgid ""
+"<qt>Check this box to stop both KPilot and the KPilot daemon after the HotSync "
+"finishes. This may be useful for systems where KPilot is started by the USB "
+"daemon.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,會在熱同步完成後同時停止 KPilot 與 KPilot 守護程式。如果 KPilot 是由 USB "
+"守護程式叫出來的,您就可以使用這個選項。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 68
+#: rc.cpp:1076
+#, no-c-format
+msgid "Startup Options"
+msgstr "啟動選項"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 79
+#: rc.cpp:1079 rc.cpp:1214
+#, no-c-format
+msgid "&Start KPilot at login"
+msgstr "登入時啟動 KPilot(&S)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 82
+#: rc.cpp:1082
+#, no-c-format
+msgid ""
+"<qt>Check this box to start up the KPilot daemon every time you log in to "
+"KDE.</qt>"
+msgstr "<qt>勾選此選項的話,每次您登入 KDE 時就會自動啟動 KPilot 守護程式。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 90
+#: rc.cpp:1085
+#, no-c-format
+msgid "S&how KPilot in system tray"
+msgstr "在系統匣中顯示 KPilot(&H)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 93
+#: rc.cpp:1088
+#, no-c-format
+msgid ""
+"<qt>Check this box to place a Kpilot icon in the system tray, which shows the "
+"daemon's status, and allows you to select the next sync type and to configure "
+"KPilot.</qt>"
+msgstr ""
+"<qt>勾選此選項的話,會在系統匣內顯示 KPilot 圖示,告訴您目前守護程式的狀態,並允許您選擇下一次同步的模式,以及設定 KPilot。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 26
+#: rc.cpp:1091
+#, no-c-format
+msgid ""
+"Finally, you can configure KPilot specifically for some PIM applications, like "
+"Kontact (KDE's integrated PIM application) or Evolution (GNOME's integrated PIM "
+"application).\n"
+"\n"
+"Press \"Finish\" to setup KPilot according to the settings in this "
+"configuration Wizard."
+msgstr ""
+"最後,您可以設定 KPilot 指定一些個人資訊管理的應用程式,如 Kontack(KDE 的個人資訊管理整合應用程式),或是 Evolution(GNOME "
+"的個人資訊管理整合應用程式)。\n"
+"\n"
+"設定好後按下「完成」。"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 37
+#: rc.cpp:1096
+#, no-c-format
+msgid "Set Default Values for Syncing With"
+msgstr "設定同步預設值"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 48
+#: rc.cpp:1099
+#, no-c-format
+msgid "&KDE-PIM suite (Kontact)"
+msgstr "KDE-PIM 套件(Kontact)(&K)"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 59
+#: rc.cpp:1102
+#, no-c-format
+msgid "&GNOME-PIM (Evolution)"
+msgstr "GNOME-PIM (Evolution)(&G)"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 67
+#: rc.cpp:1105
+#, no-c-format
+msgid "No sync, just backup"
+msgstr "不同步,只備份"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 29
+#: rc.cpp:1111
+#, no-c-format
+msgid "Backup Frequency"
+msgstr "備份頻率"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 54
+#: rc.cpp:1114
+#, no-c-format
+msgid "Do &backup:"
+msgstr "執行備份(&B):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 63
+#: rc.cpp:1117
+#, no-c-format
+msgid "On every HotSync"
+msgstr "每次熱同步時"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 68
+#: rc.cpp:1120
+#, no-c-format
+msgid "On request only"
+msgstr "只在使用者要求時"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 90
+#: rc.cpp:1123
+#, no-c-format
+msgid "Databases"
+msgstr "資料庫"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 107
+#: rc.cpp:1126
+#, no-c-format
+msgid "&No backup:"
+msgstr "無備份(&N):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 113
+#: rc.cpp:1129 rc.cpp:1138
+#, no-c-format
+msgid ""
+"<qt>"
+"<p>Enter the databases types you wish to exclude from the backup operation "
+"here. Use this setting if backing up some databases crashes the handheld, or if "
+"you do not want a backup of some databases (like AvantGo pages).</p>"
+"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
+"and can exclude a whole range of databases. Entries without the brackets list "
+"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
+"</qt>"
+msgstr ""
+"<qt>"
+"<p>請在此輸入您在備份時要排除的資料庫型態。如果在備份某些資料庫時會造成掌上型裝置當機的話,或是您不想備份某些資料庫(如 AvantGo "
+"頁面),您可以使用此選項。</p>"
+"<p>使用方括號 [] 括起來的項目為建立者代碼(<i>Creator codes</i>),像是 <tt>[Inch]</tt>"
+",可以排除整個範圍的資料庫。沒有用方括號括起來的文字則是資料庫名稱,可以包含萬用字元,如 <tt>*_a68k</tt>。</p></qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 127
+#: rc.cpp:1132
+#, no-c-format
+msgid "Not &restored:"
+msgstr "不回復(&R):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 133
+#: rc.cpp:1135 rc.cpp:1141
+#, no-c-format
+msgid ""
+"<qt>"
+"<p>Enter the databases types you wish to exclude from the restore operation "
+"here (like AvantGo databases). They will be skipped even if they exist in the "
+"set of backup databases on the handheld. If you still want to install an "
+"ignored database to the handheld, you can always manually install it to the "
+"handheld.</p>"
+"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
+"and can exclude a whole range of databases. Entries without the brackets list "
+"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
+"</qt>"
+msgstr ""
+"<qt>"
+"<p>請在此輸入您在回復資料庫時要排除的資料庫型態(如 AvantGo "
+"資料庫)。它們會在回復動作時被略過,即使在掌上型裝置有設定要備份。如果您要將一個被排除的資料庫安裝到掌上型裝置,您可以手動安裝。</p>"
+"<p>使用方括號 [] 括起來的項目為建立者代碼(<i>Creator codes</i>),像是 <tt>[Inch]</tt>"
+",可以排除整個範圍的資料庫。沒有用方括號括起來的文字則是資料庫名稱,可以包含萬用字元,如 <tt>*_a68k</tt>。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 157
+#: rc.cpp:1144 rc.cpp:1150
+#, no-c-format
+msgid "..."
+msgstr "..."
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 160
+#: rc.cpp:1147
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you to "
+"check the databases you want to exclude from the backup from a list.</qt>"
+msgstr "<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在備份時排除的資料庫。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 171
+#: rc.cpp:1153
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you to "
+"select the databases you want to exclude from the restore operation from a "
+"list.</qt>"
+msgstr "<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在回復時排除的資料庫。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 181
+#: rc.cpp:1156
+#, no-c-format
+msgid "Run conduits durin&g a backup sync"
+msgstr "在備份同步時執行導管(&G)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 184
+#: rc.cpp:1159
+#, no-c-format
+msgid ""
+"<qt>Check this box to run the selected conduits before every backup. This makes "
+"sure the backup is up to date with the last changes from your PC.</qt>"
+msgstr "<qt>勾選此選項的話,在每次備份前會先執行所選取的導管。這能確保您的備份是 PC 上修改過的最新的資料。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 24
+#: rc.cpp:1162
+#, no-c-format
+msgid "This wizard will help you configure KPilot."
+msgstr "這個精靈會協助您設定 KPilot。"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 35
+#: rc.cpp:1165
+#, no-c-format
+msgid ""
+"As a first step, we need to determine the user name and how the handheld is "
+"connected to the computer."
+msgstr "在第一個步驟中,我們要決定使用者名稱,以及掌上型裝置要怎麼連到電腦上。"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 46
+#: rc.cpp:1168
+#, no-c-format
+msgid "Handheld && User Name"
+msgstr "掌上型裝置與使用者名稱"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 62
+#: rc.cpp:1171
+#, no-c-format
+msgid ""
+"<p>You can either let KPilot detect these values automatically (for this you "
+"need your handheld ready and connected to the PC) or enter them manually.</p>\n"
+"<p>Please enter the username exactly as set on the handheld. </p>\n"
+"<p>If setting the device type manually (i.e., if automatic detection did not "
+"work for you), please look below for tips on choosing the right device name. "
+"{0...n} means a number from 0 up to a very large number, though usually just "
+"255.\n"
+"<p>\n"
+"Serial Port: an old method of connection, used primarily by the original line "
+"of Palm Pilots, and various Palm-based cellphones. Device name will look like "
+"/dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"USB Port: A newer style of connection, used by most newer Palms, Handsprings, "
+"and Sony Clies. Device name will look like /dev/ttyUSB{0...n} or "
+"/dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD). On Linux, "
+"definitely check both 0 and 1: newer devices tend to use 1; older devices tend "
+"to use 0.</p>\n"
+"<p>\n"
+"Infrared: (pronounced infra-red) is a relatively slow connection type used "
+"solely as a last resort. Device name will be /dev/ircomm0 or /dev/ttyS{0...n} "
+"(Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"Bluetooth: A new connection method, this is used almost exclusively on new, "
+"high-end devices, like the Tungsten T3 or the Zire 72. Device name will be "
+"/dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
+"(FreeBSD).</p>\n"
+"<p>\n"
+"Network: This has not been tested by any of the KPilot developers themselves "
+"(hardware donations always accepted!), but it has been reported that setting "
+"the device to \"net:any\" will work for network-enabled devices. However, this "
+"has also been known to lock KPilot up when doing anything other than just "
+"syncing. Use it with caution.\n"
+"</p>"
+msgstr ""
+"<p>您可以讓 KPilot 自動偵測這些值(您當然要先將您的掌上型裝置連到您的電腦上),或是自己手動輸入這些值。</p>\n"
+"<p>請輸入掌上型裝置上設定的使用者名稱。</p>\n"
+"<p>如果無法自動偵測,您必須手動輸入裝置型態時,請先參考底下的提示,以選擇正確的裝置名稱。{0...n} 表示從 0 到 n,通常 n 不超過 "
+"255。</p>\n"
+"<p>序列埠:舊式的連接方式,主要用於早期的 Palm Pilots,以及一些 Palm 的行動電話。它們的裝置名稱會是 /dev/ttyS{0...n}(在 "
+"Linux 上)或是 /dev/cuaa{0...n}(在 FreeBSD 上)。</p>\n"
+"<p>USB 埠:新式的連線方式,主要用於新的 Palms,Handsprings 與 Sony Clies 系列。裝置名稱會是 "
+"/dev/ttyUSB{0...n}(在 Linux 上)或是 /dev/ucom{0...n}(在 FreeBSD 上)。在 Linux 上,您要同時試試 "
+"0 跟 1,因為新式的裝置會用 1,而較舊的裝置會用 0。</p>\n"
+"<p>紅外線:速度比較慢,通常只用於最後的救急。裝置名稱會是 /dev/ircomm0 或 /dev/ttyS{0...b}(在 Linux 上),或是 "
+"/dev/sio{0...n}(在 FreeBSD 上)。</p>\n"
+"<p>藍芽:新式的連線方式,通常只用於新的,高檔的裝置,如 Tungsten T3 或 Zire 72。裝置名稱會是 "
+"/dev/usb/ttub/{0...n} 或 /dev/ttyUB{0...n}(在 Linux 上),或是 /dev/ttyp{0...n}(在 "
+"FreeBSD 上)。</p>\n"
+"<p>網路:目前尚未經過任何 KPilot 開發者的測試(有人要捐獻硬體嗎?),不過已經有回報,將裝置設為 \"net:any\" "
+"可以在開啟網路的裝置上運作。不過,也有人回報說使用這個選項只能做同步,其他的動作都會鎖死 KPilot。所以請小心使用。</p></p>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 73
+#: rc.cpp:1187
+#, no-c-format
+msgid "&Device:"
+msgstr "裝置(&D):"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 79
+#: rc.cpp:1190 rc.cpp:1202
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
+"correct device. Use the button below to automatically detect the device. You "
+"need write permission to successfully synchronize with the handheld.</qt>"
+msgstr ""
+"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> "
+"並將它連到正確的裝置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 87
+#: rc.cpp:1193
+#, no-c-format
+msgid "&Automatically Detect Handheld && User Name"
+msgstr "自動偵測掌上型裝置與使用者名稱(&A)"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 90
+#: rc.cpp:1196
+#, no-c-format
+msgid ""
+"<qt>Click this button to open the detection dialog. The wizard will try to "
+"automatically find and display the correct device and username for your "
+"handheld. If the wizard cannot retrieve this information, check if you have "
+"write permission for the device.</qt>"
+msgstr ""
+"<qt>點擊此按鍵開啟偵測對話框。這個精靈會試著自動找出您的掌上型裝置,並顯示使用者名稱。如果精靈無法取得這些資訊,請檢查您是否對該裝置有寫入的權限。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 98
+#: rc.cpp:1199
+#, no-c-format
+msgid "/dev/pilot"
+msgstr "/dev/pilot"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 109
+#: rc.cpp:1205 rc.cpp:1211
+#, no-c-format
+msgid ""
+"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting, or use the button below to automatically detect it.</qt>"
+msgstr ""
+"<qt>請在此輸入您的使用者名稱,必須與 Pilot 上的 &quot;Owner&quot; 設定一樣,或是用底下的按鍵來自動偵測。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 117
+#: rc.cpp:1208
+#, no-c-format
+msgid "User na&me:"
+msgstr "使用者名稱(&M):"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 139
+#: rc.cpp:1217
+#, no-c-format
+msgid ""
+"<qt>Check this box to make the kpilot daemon load when you first log in until "
+"you log out. That means (in theory), that you should not have to do anything "
+"other than connect your handheld and push \"sync\", and kpilot will appear and "
+"magically do your bidding. </qt>"
+msgstr ""
+"<qt>勾選此選項的話,當您當入時 KPilot "
+"守護程式會自動載入,直到您登出。這表示(理論上)您不需要做什麼,只需要連上您的掌上型裝置,然後按下「同步」,KPilot "
+"就會自動出現並神奇地照您的吩咐工作。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 47
+#: rc.cpp:1226
+#, no-c-format
+msgid "Make internal viewers &editable"
+msgstr "讓內部檢視器可以編輯(&E)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 53
+#: rc.cpp:1229
+#, no-c-format
+msgid ""
+"<qt>The internal viewers can be read only or editable. The editable mode allows "
+"you to add new records, delete or edit the existing records and sync your "
+"modifications back to the handheld. Check this box to set the internal viewers "
+"to editable mode, uncheck to set them to read only mode.</qt>"
+msgstr ""
+"<qt>內部檢視器可以選擇要唯讀或是可編輯。可編輯模式讓您可以新增、刪除或編輯現有的紀錄,並同步到您的掌上型裝置。勾選此選項表示開啟可編輯模式,取消勾選則設為唯"
+"讀模式。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 61
+#: rc.cpp:1232
+#, no-c-format
+msgid "&Show private records"
+msgstr "顯示私人紀錄(&S)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 64
+#: rc.cpp:1235
+#, no-c-format
+msgid ""
+"<qt>Check this box to display in the internal viewers records that are marked "
+"&quot;Private&quot; in the Pilot.</qt>"
+msgstr "<qt>勾選此選項的話,會在內部檢視器顯示在 Pilot 上被標記為私人(&quot;Private&quot;)的紀錄。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 85
+#: rc.cpp:1241
+#, no-c-format
+msgid "Show as \"&Last, first\""
+msgstr "顯示為「姓,名」(&L)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 88
+#: rc.cpp:1244
+#, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by last name, first name.</qt>"
+msgstr "<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會依「姓,名」來排序。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 96
+#: rc.cpp:1247
+#, no-c-format
+msgid "Show as \"&Company, last\""
+msgstr "顯示為「公司,姓」(&C)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 99
+#: rc.cpp:1250
+#, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by company name, last name.</qt>"
+msgstr "<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會依「公司名稱,姓」來排序。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 121
+#: rc.cpp:1253
+#, no-c-format
+msgid "&Use key field"
+msgstr "使用主欄位(&U)"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 124
+#: rc.cpp:1256
+#, no-c-format
+msgid ""
+"<qt>Check this box to combine all entries with the same last name in the "
+"internal address viewer.</qt>"
+msgstr "<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會將相同姓氏的紀錄組合在一起。</qt>"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 32
+#: rc.cpp:1268
+#, no-c-format
+msgid "Database &name:"
+msgstr "資料庫名稱(&N):"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 51
+#: rc.cpp:1271
+#, no-c-format
+msgid "&Creator:"
+msgstr "建立者(&C):"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 70
+#: rc.cpp:1274
+#, no-c-format
+msgid "&Type:"
+msgstr "類型(&T):"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 97
+#: rc.cpp:1277
+#, no-c-format
+msgid "Database Flags"
+msgstr "資料庫旗標"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 108
+#: rc.cpp:1280
+#, no-c-format
+msgid "&Ressource database"
+msgstr "資源資料庫"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 116
+#: rc.cpp:1283
+#, no-c-format
+msgid "Rea&d-only"
+msgstr "唯讀(&D)"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 124
+#: rc.cpp:1286
+#, no-c-format
+msgid "Database is &backed up"
+msgstr "資料庫已備份(&B)"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 132
+#: rc.cpp:1289
+#, no-c-format
+msgid "Copy &protected"
+msgstr "拷貝防護(&P)"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 159
+#: rc.cpp:1292
+#, no-c-format
+msgid "Misc Flags"
+msgstr "雜項旗標"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 187
+#: rc.cpp:1295
+#, no-c-format
+msgid "Reset after &installation"
+msgstr "安裝後重置(&I)"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 195
+#: rc.cpp:1298
+#, no-c-format
+msgid "E&xclude from sync"
+msgstr "從同步排除(&X)"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 205
+#: rc.cpp:1301
+#, no-c-format
+msgid "Time Stamps"
+msgstr "時間"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 224
+#: rc.cpp:1304
+#, no-c-format
+msgid "Cr&eation time:"
+msgstr "建立時間(&E):"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 235
+#: rc.cpp:1307
+#, no-c-format
+msgid "&Modification time:"
+msgstr "變更時間(&M):"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 246
+#: rc.cpp:1310
+#, no-c-format
+msgid "Back&up time:"
+msgstr "備份時間(&U):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 29
+#: rc.cpp:1316
+#, no-c-format
+msgid "Pilot &device:"
+msgstr "Pilot 裝置(&D):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 35
+#: rc.cpp:1319 rc.cpp:1322
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
+"correct device. You need write permission to successfully synchronize with the "
+"handheld.</qt>"
+msgstr ""
+"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> "
+"並將它連到正確的裝置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 51
+#: rc.cpp:1325
+#, no-c-format
+msgid "&Speed:"
+msgstr "速度(&S):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 57
+#: rc.cpp:1328 rc.cpp:1349
+#, no-c-format
+msgid ""
+"<qt>Select the speed of the serial connection to your handheld here. This has "
+"no meaning for USB devices. For an older model, choose 9600. Newer models may "
+"be able to handle speeds up to the maximum listed, 115200. You can experiment "
+"with the connection speed: the manual suggests starting at a speed of 19200 and "
+"trying faster speeds to see if they work.</qt>"
+msgstr ""
+"<qt>請在此選擇序列埠連接的速度。這個選項與 USB 連線無關。對一些舊式的裝置,請選擇 9600。新一點的裝置可以上到 "
+"115200。您可以實驗一下看看哪個速度才正確:手冊的建議是從 19200 開始試,如果看起來可以,就加快速度試試。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 65
+#: rc.cpp:1331 rc.cpp:1361
+#, no-c-format
+msgid ""
+"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting.</qt>"
+msgstr "<qt>請在此輸入您的姓名,必須與 Pilot 上的 &quot;Owner&quot; 設定一樣。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 88
+#: rc.cpp:1334
+#, no-c-format
+msgid "9600"
+msgstr "9600"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 93
+#: rc.cpp:1337
+#, no-c-format
+msgid "19200"
+msgstr "19200"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 98
+#: rc.cpp:1340
+#, no-c-format
+msgid "38400"
+msgstr "38400"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 103
+#: rc.cpp:1343
+#, no-c-format
+msgid "57600"
+msgstr "57600"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 108
+#: rc.cpp:1346
+#, no-c-format
+msgid "115200"
+msgstr "115200"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 123
+#: rc.cpp:1352
+#, no-c-format
+msgid "En&coding:"
+msgstr "編碼(&C):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 129
+#: rc.cpp:1355 rc.cpp:1364
+#, no-c-format
+msgid ""
+"<qt>PalmOS devices are available in many different languages. If your device "
+"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
+"encoding here, in order to display special characters correctly.</qt>"
+msgstr ""
+"<qt>PalmOS 裝置提供了多國語言。如果您的裝置使用與 "
+"ISO-latin1(ISO8859-1)不同的語言,請在此選擇正確的編碼,以顯示正確的字元。</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 137
+#: rc.cpp:1358
+#, no-c-format
+msgid "Pilot &user:"
+msgstr "Pilot 使用者(&U):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 162
+#: rc.cpp:1367
+#, no-c-format
+msgid "&Workarounds:"
+msgstr "開發中選項(&W):"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 171
+#: rc.cpp:1370
+#, no-c-format
+msgid "None"
+msgstr "無"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 176
+#: rc.cpp:1373
+#, no-c-format
+msgid "Zire 31, 72, Tungsten T5"
+msgstr "Zire 31, 72, Tungsten T5"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 183
+#: rc.cpp:1376
+#, no-c-format
+msgid ""
+"<qt>Workarounds enable special handling for specific devices. Most devices do "
+"not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten T5 <i>"
+"do</i> have special needs, so if you are connecting such a device, please "
+"select the workaround for them.</qt>"
+msgstr ""
+"<qt>開發中選項(Workarounds)會針對一些特殊的裝置開啟特殊的處理。大部份的裝置都不需要特殊處理。不過像 Zire&tm; 31,Zire 72 "
+"與 Tungsten T5 就有特殊需求,因此若您是使用這類的裝置,請選擇此選項。</qt>"
+
+#. i18n: file ./kpilot/dbSelection_base.ui line 23
+#: rc.cpp:1379
+#, no-c-format
+msgid "Database"
+msgstr "資料庫"
+
+#. i18n: file ./kpilot/dbSelection_base.ui line 60
+#: rc.cpp:1385
+#, no-c-format
+msgid "&Add"
+msgstr "新增(&A)"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 89
+#: rc.cpp:1406
+#, no-c-format
+msgid "&Deleted"
+msgstr "已刪除(&D)"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 97
+#: rc.cpp:1409
+#, no-c-format
+msgid "Busy"
+msgstr "忙碌"
+
+#~ msgid " The port does not exist."
+#~ msgstr "此連接埠不存在。"
+
+#~ msgid " There is no such device."
+#~ msgstr "找不到裝置。"
+
+#~ msgid " You do not have permission to open the Pilot device."
+#~ msgstr "您沒有開啟 Pilot 裝置的權限。"
+
+#~ msgid " Check Pilot path and permissions."
+#~ msgstr "請檢查 Pilot 路徑與權限。"