From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001
From: Darrell Anderson These bookmarks are specific to the file dialog, but otherwise operate like "
-"bookmarks elsewhere in KDE. Ove zabilješke su specifične za dijalog datoteka, ali također funkcionišu "
-"kao zabilješke bilo gdje drugo u KDEu. KDE is translated into many languages thanks to the work of the translation "
+" TDE is translated into many languages thanks to the work of the translation "
"teams all over the world. For more information on KDE internationalization visit For more information on TDE internationalization visit http://l10n.kde.org Bosanski prijevod je napravljen u organizaciji LUG BiHhttp://www.linux.org.ba. Za više informacija pozivamo vas da posjetite bosansku KDE stranicu na Za više informacija pozivamo vas da posjetite bosansku TDE stranicu na http://kde.linux.org.ba Possible reasons: Check these points carefully and try to remove the module mentioned in the "
@@ -8510,7 +8510,7 @@ msgstr ""
" Mogući uzroci: Provjerite pažljivo ove dvije tačke i probajte ukloniti modul spomenut u "
@@ -8706,8 +8706,8 @@ msgid "kcmkresources"
msgstr "kcmkresources"
#: kresources/kcmkresources.cpp:45
-msgid "KDE Resources configuration module"
-msgstr "KDE Modul za podešavanje resursa"
+msgid "TDE Resources configuration module"
+msgstr "TDE Modul za podešavanje resursa"
#: kresources/kcmkresources.cpp:47
msgid "(c) 2003 Tobias Koenig"
@@ -8888,24 +8888,24 @@ msgstr "Nemam više memorije"
msgid ""
"Your local kab configuration file \"%1\" could not be created. kab will "
"probably not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
"(usually ~/.kde)."
msgstr ""
"Nisam mogao napraviti lokalnu datoteku sa postavkama kab-a \"%1\". kab "
"vjerovatno neće raditi ispravno bez nje.\n"
-"Provjerite da li ste isključili dozvolu za pisanje za vaš lokalni KDE "
+"Provjerite da li ste isključili dozvolu za pisanje za vaš lokalni TDE "
"direktorij (obično ~/.kde)."
#: kab/addressbook.cc:461
msgid ""
"Your standard kab database file \"%1\" could not be created. kab will probably "
"not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
"(usually ~/.kde)."
msgstr ""
"Nisam mogao napraviti datoteku sa standardnom kab bazom podataka \"%1\". kab "
"vjerovatno neće raditi ispravno bez nje.\n"
-"Provjerite da li ste isključili dozvolu za pisanje za vaš lokalni KDE "
+"Provjerite da li ste isključili dozvolu za pisanje za vaš lokalni TDE "
"direktorij (obično ~/.kde)."
#: kab/addressbook.cc:471
@@ -9212,8 +9212,8 @@ msgid "Import &All"
msgstr "Uvezi &Sve"
#: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359
-msgid "KDE Secure Certificate Import"
-msgstr "KDE sigurni uvoz certifikata"
+msgid "TDE Secure Certificate Import"
+msgstr "TDE sigurni uvoz certifikata"
#: kcert/kcertpart.cc:184
msgid "Chain:"
@@ -9304,8 +9304,8 @@ msgid "Certificate Import"
msgstr "Uvoz certifikata"
#: kcert/kcertpart.cc:455
-msgid "You do not seem to have compiled KDE with SSL support."
-msgstr "Izgleda da niste kompajlirali KDE sa SSL podrškom."
+msgid "You do not seem to have compiled TDE with SSL support."
+msgstr "Izgleda da niste kompajlirali TDE sa SSL podrškom."
#: kcert/kcertpart.cc:460
msgid "Certificate file is empty."
@@ -9345,23 +9345,23 @@ msgstr ""
#: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759
msgid ""
-"Certificate has been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificate has been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
msgstr ""
-"Certifikat je uspješno uvezen u KDE.\n"
-"Možete rukovati postavkama certifikata iz KDE Kontrolnog centra."
+"Certifikat je uspješno uvezen u TDE.\n"
+"Možete rukovati postavkama certifikata iz TDE Kontrolnog centra."
#: kcert/kcertpart.cc:873
msgid ""
-"Certificates have been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificates have been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
msgstr ""
-"Certifikati su uspješno uvezeni u KDE.\n"
-"Možete rukovati postavkama certifikata iz KDE Kontrolnog centra."
+"Certifikati su uspješno uvezeni u TDE.\n"
+"Možete rukovati postavkama certifikata iz TDE Kontrolnog centra."
#: kcert/kcertpart.cc:879
-msgid "KDE Certificate Part"
-msgstr "KDE dio za certifikate"
+msgid "TDE Certificate Part"
+msgstr "TDE dio za certifikate"
#: khtml/khtml_settings.cc:152
msgid "Accept"
@@ -9548,12 +9548,12 @@ msgid "expand ${prefix} and ${exec_prefix} in output"
msgstr "proširi ${prefix} i ${exec_prefix} u izlazu"
#: tdecore/tde-config.cpp.in:19
-msgid "Compiled in prefix for KDE libraries"
-msgstr "Ukompajlirani prefix KDE biblioteka"
+msgid "Compiled in prefix for TDE libraries"
+msgstr "Ukompajlirani prefix TDE biblioteka"
#: tdecore/tde-config.cpp.in:20
-msgid "Compiled in exec_prefix for KDE libraries"
-msgstr "Ukompajlirani exec_prefix KDE biblioteka"
+msgid "Compiled in exec_prefix for TDE libraries"
+msgstr "Ukompajlirani exec_prefix TDE biblioteka"
#: tdecore/tde-config.cpp.in:21
msgid "Compiled in library path suffix"
@@ -9564,12 +9564,12 @@ msgid "Prefix in $HOME used to write files"
msgstr "Prefix u $HOME korišten za pisanje datoteka"
#: tdecore/tde-config.cpp.in:23
-msgid "Compiled in version string for KDE libraries"
-msgstr "Ukompajlirani string verzije KDE biblioteka"
+msgid "Compiled in version string for TDE libraries"
+msgstr "Ukompajlirani string verzije TDE biblioteka"
#: tdecore/tde-config.cpp.in:24
-msgid "Available KDE resource types"
-msgstr "Dostupne vrste KDE resursa"
+msgid "Available TDE resource types"
+msgstr "Dostupne vrste TDE resursa"
#: tdecore/tde-config.cpp.in:25
msgid "Search path for resource type"
diff --git a/tde-i18n-bs/messages/tdelibs/tdeprint.po b/tde-i18n-bs/messages/tdelibs/tdeprint.po
index 763fc693e93..febe89628a7 100644
--- a/tde-i18n-bs/messages/tdelibs/tdeprint.po
+++ b/tde-i18n-bs/messages/tdelibs/tdeprint.po
@@ -510,13 +510,13 @@ msgstr ""
msgid ""
" Use this combo box to select the printer to which you want to print. "
-"Initially (if you run KDEPrint for the first time), you may only find the "
-"KDE special printers (which save jobs to disk [as PostScript- or "
+"Initially (if you run TDEPrint for the first time), you may only find the "
+"TDE special printers (which save jobs to disk [as PostScript- or "
"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
"a real printer, you need to... "
" Note: It may happen that you successfully connected to a remote CUPS "
-"server and still do not get a printer list. If this happens: force KDEPrint to "
+"server and still do not get a printer list. If this happens: force TDEPrint to "
"re-load its configuration files. To reload the configuration files, either "
"start kprinter again, or use the switch the print system away from CUPS and "
"back again once. The print system switch can be made through a selection in "
@@ -532,11 +532,11 @@ msgid ""
msgstr ""
" Koristite ovo kombinirano polje da izaberete štampač na koji želite "
-"štampati. Ako pronađete samo KDE specijalne štampače "
+"štampati. Ako pronađete samo TDE specijalne štampače "
"-- koji snimaju vaše dokumente na disk ili ih šalju putem e-maila -- ali nemate "
"nijedan pravi štampač, onda trebate... "
" Napomena: Može se desiti da ste se uspješno spojili na udaljeni CUPS "
-"server a još uvijek nemate listu štampača. Ako se ovo desi: prinudite KDEPrint "
+"server a još uvijek nemate listu štampača. Ako se ovo desi: prinudite TDEPrint "
"da ponovo učita svoje konfiguracione datoteke. Ovo možete uraditi ili tako što "
"ćete ponovo pokrenuti kprinter ili tako što ćete izabrati neki drugi sistem "
"štampe a zatim ponovo CUPS. Promjena sistema štampe se može napraviti izborom u "
@@ -570,7 +570,7 @@ msgid ""
" To create a personal 'selective view list', click on the "
"'System Options' button at the bottom of this dialog. Then, in the new "
"dialog, select 'Filter' (left column in the "
-"KDE Print Configuration dialog) and setup your selection.. Warning: Clicking this button without prior creation of a personal "
"'selective view list' will make all printers dissappear from the "
"view. (To re-enable all printers, just click this button again.) Da biste napravili lični 'selektivni pogled', kliknite na dugme "
"'Sistemske opcije' na dnu ovog dijaloga. Zatim, u novom dijalogu, "
"izaberite opciju 'Filter' (lijeva kolona u dijalogu "
-"KDE Podešavanje štampe) i podesite vaš izbor.
(Kod greške %2: %3)"
#: misc/kwalletd/kwalletd.cpp:518
-msgid "
"
-"
If you do not want KDE to supply an extension for the filename, you can "
+"
If you do not want TDE to supply an extension for the filename, you can "
"either turn this option off or you can suppress it by adding a period (.) to "
"the end of the filename (the period will be automatically removed)."
"If unsure, keep this option enabled as it makes your files more manageable."
@@ -4172,7 +4172,7 @@ msgstr ""
"ime datoteke već ne postoji). Ova ekstenzija je bazirana na vrsti datoteke pod "
"kojom ste odabrali da snimite istu."
"
"
-"
Ako ne želite da KDE obezbijedi ekstenziju za ime datoteke, možete ili "
+"
Ako ne želite da TDE obezbijedi ekstenziju za ime datoteke, možete ili "
"isključiti ovu opciju ili je preduhitriti dodavanjem tačke (.) na kraj imena "
"datoteke (tačka će automatski biti uklonjena)."
"Ako niste sigurni, ostavite ovu opciju uključenom pošto ona čini vaše datoteke "
@@ -4183,13 +4183,13 @@ msgid ""
"
"
-"
No single group, company or organization controls the KDE source code. "
-"Everyone is welcome to contribute to KDE."
+"
No single group, company or organization controls the TDE source code. "
+"Everyone is welcome to contribute to TDE."
"
"
"
Visit http://www.kde.org "
-"for more information on the KDE project. "
+"for more information on the TDE project. "
msgstr ""
-"KDE Desktop Environment je napisao i održava KDE tim, svjetska mreža "
+"TDE Desktop Environment je napisao i održava TDE tim, svjetska mreža "
"programera koji rade na razvoju slobodnog softvera."
"
"
"
Niti jedna grupa, kompanija ili organizacija ne kontroliraju izvorni kod "
-"KDE-a. Bilo ko može pridonijeti razvoju KDE-a."
+"TDE-a. Bilo ko može pridonijeti razvoju TDE-a."
"
"
"
Posjetite http://www.kde.org "
-"za dodatne informacije o KDE projektu. "
+"za dodatne informacije o TDE projektu. "
#: tdeui/kaboutkde.cpp:43
msgid ""
-"Software can always be improved, and the KDE Team is ready to do so. However, "
+"Software can always be improved, and the TDE Team is ready to do so. However, "
"you - the user - must tell us when something does not work as expected or could "
"be done better."
"
"
@@ -5547,7 +5547,7 @@ msgid ""
"bug tracking system to register your wish. Make sure you use the severity "
"called \"Wishlist\"."
msgstr ""
-"Softver uvijek može biti unaprijeđen, a KDE team je spreman da to i uradi. "
+"Softver uvijek može biti unaprijeđen, a TDE team je spreman da to i uradi. "
"Ipak, ti - korisnik - nam moraš reći ako nešto ne radi kako je očekivano ili "
"može biti urađeno na bolji način. "
"
"
@@ -5561,7 +5561,7 @@ msgstr ""
#: tdeui/kaboutkde.cpp:54
msgid ""
-"You do not have to be a software developer to be a member of the KDE team. You "
+"You do not have to be a software developer to be a member of the TDE team. You "
"can join the national teams that translate program interfaces. You can provide "
"graphics, themes, sounds, and improved documentation. You decide!"
"
"
@@ -5572,7 +5572,7 @@ msgid ""
"HREF=\"http://developer.kde.org/\">http://developer.kde.org "
"will provide you with what you need."
msgstr ""
-"Ne morate biti programer da biste bili član KDE Teama. Možete se pridružiti "
+"Ne morate biti programer da biste bili član TDE Teama. Možete se pridružiti "
"nacionalnim timovima koji prevode interfejs programa. Možete obezbjediti "
"grafike, teme, zvukove ili bolju dokumentaciju. Odlučite sami!"
"
"
@@ -5585,32 +5585,32 @@ msgstr ""
#: tdeui/kaboutkde.cpp:67
msgid ""
-"KDE is available free of charge, but making it is not free."
+"TDE is available free of charge, but making it is not free."
"
"
-"
Thus, the KDE team formed the KDE e.V., a non-profit organization legally "
-"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal "
+"
Thus, the TDE team formed the TDE e.V., a non-profit organization legally "
+"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal "
"and financial matters. See "
-"http://www.kde-ev.org for information on the KDE e.V."
+"http://www.kde-ev.org for information on the TDE e.V."
"
"
-"
The KDE team does need financial support. Most of the money is used to "
+"
The TDE team does need financial support. Most of the money is used to "
"reimburse members and others on expenses they experienced when contributing to "
-"KDE. You are encouraged to support KDE through a financial donation, using one "
+"TDE. You are encouraged to support TDE through a financial donation, using one "
"of the ways described at "
"http://www.kde.org/support/."
"
"
"
Thank you very much in advance for your support."
msgstr ""
-"KDE je dostupan besplatno, ali njegovo pravljenje košta."
+"TDE je dostupan besplatno, ali njegovo pravljenje košta."
"
"
-"
Stoga je KDE Team oformio KDE Asocijaciju, neprofitnu organizaciju koja je "
-"legalno registrovana u Tübingenu, Njemačka. KDE Asocijacija predstavlja "
-"pravno-finansijsku stranu KDE projekta. Pogledajte Stoga je TDE Team oformio TDE Asocijaciju, neprofitnu organizaciju koja je "
+"legalno registrovana u Tübingenu, Njemačka. TDE Asocijacija predstavlja "
+"pravno-finansijsku stranu TDE projekta. Pogledajte http://www.kde-ev.org/ "
-"za više informacija o KDE Asocijaciji."
+"za više informacija o TDE Asocijaciji."
"
"
-"
KDE Team-u je potrebna finansijska pomoć. Većina novca se koristi za "
+"
TDE Team-u je potrebna finansijska pomoć. Većina novca se koristi za "
"refundiranje troškova koje su članovi projekta i ostali imali doprinoseći "
-"KDE-u. Pozivamo vas da podržite KDE kroz novčanu donaciju, koristeći jedan od "
+"TDE-u. Pozivamo vas da podržite TDE kroz novčanu donaciju, koristeći jedan od "
"načina koji su opisani na "
"http://www.kde.org/support/. "
"
"
@@ -5623,21 +5623,21 @@ msgstr "K Desktop Environment. Izdanje %1"
#: tdeui/kaboutkde.cpp:83
msgid ""
-"_: About KDE\n"
+"_: About TDE\n"
"&About"
-msgstr "O &KDE..."
+msgstr "O &TDE..."
#: tdeui/kaboutkde.cpp:84
msgid "&Report Bugs or Wishes"
msgstr "&Prijavite bug ili želju"
#: tdeui/kaboutkde.cpp:85
-msgid "&Join the KDE Team"
-msgstr "&Pridružite se KDE timu"
+msgid "&Join the TDE Team"
+msgstr "&Pridružite se TDE timu"
#: tdeui/kaboutkde.cpp:86
-msgid "&Support KDE"
-msgstr "&Podržite KDE"
+msgid "&Support TDE"
+msgstr "&Podržite TDE"
#: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804
msgid "&Yes"
@@ -6563,8 +6563,8 @@ msgid "&About %1"
msgstr "&O %1"
#: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114
-msgid "About &KDE"
-msgstr "O &KDE"
+msgid "About &TDE"
+msgstr "O &TDE"
#: tdeui/kactionclasses.cpp:2072
msgid "Exit F&ull Screen Mode"
@@ -6691,8 +6691,8 @@ msgid "Task"
msgstr "Zadatak"
#: tdeui/kaboutdialog.cpp:704
-msgid "%1 %2 (Using KDE %3)"
-msgstr "%1 %2 (Koristi KDE %3)"
+msgid "%1 %2 (Using TDE %3)"
+msgstr "%1 %2 (Koristi TDE %3)"
#: tdeui/kaboutdialog.cpp:706
msgid "%1 %2, %3"
@@ -7445,8 +7445,8 @@ msgstr ""
"formulara. Ovaj dodatak je uklonjen radi vaše sigurnosti."
#: khtml/khtml_part.cpp:4870
-msgid "KDE"
-msgstr "KDE"
+msgid "TDE"
+msgstr "TDE"
#: khtml/khtml_part.cpp:5776
msgid "(%1/s)"
@@ -7844,8 +7844,8 @@ msgid "Archives"
msgstr "Arhive"
#: khtml/java/kjavaappletviewer.cpp:451
-msgid "KDE Java Applet Plugin"
-msgstr "KDE dodatak za Java applete"
+msgid "TDE Java Applet Plugin"
+msgstr "TDE dodatak za Java applete"
#: khtml/java/kjavaapplet.cpp:225
msgid "Initializing Applet \"%1\"..."
@@ -8040,8 +8040,8 @@ msgstr ""
"klauncher: Njega automatski pokreće tdeinit.\n"
#: kinit/klauncher.cpp:743
-msgid "KDEInit could not launch '%1'."
-msgstr "KDEInit nije mogao pokrenuti '%1'."
+msgid "TDEInit could not launch '%1'."
+msgstr "TDEInit nije mogao pokrenuti '%1'."
#: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960
msgid "Could not find service '%1'."
@@ -8089,8 +8089,8 @@ msgid "KConf Update"
msgstr "KConf Update"
#: kconf_update/kconf_update.cpp:945
-msgid "KDE Tool for updating user configuration files"
-msgstr "KDE alat za updatovanje korisnički datoteka sa postavkama"
+msgid "TDE Tool for updating user configuration files"
+msgstr "TDE alat za updatovanje korisnički datoteka sa postavkama"
#: kspell2/ui/configdialog.cpp:38
msgid "KSpell2 Configuration"
@@ -8125,12 +8125,12 @@ msgid "Web style plugin"
msgstr "Web stil dodatak"
#: kstyles/klegacy/plugin.cpp:28
-msgid "KDE LegacyStyle plugin"
-msgstr "KDE LegacyStyle dodatak"
+msgid "TDE LegacyStyle plugin"
+msgstr "TDE LegacyStyle dodatak"
#: kstyles/utils/installtheme/main.cpp:35
-msgid "KDE Tool to build a cache list of all pixmap themes installed"
-msgstr "KDE alat za izgradnju keširane liste svih instaliranih pixmap tema"
+msgid "TDE Tool to build a cache list of all pixmap themes installed"
+msgstr "TDE alat za izgradnju keširane liste svih instaliranih pixmap tema"
#: kstyles/utils/installtheme/main.cpp:40
msgid "KInstalltheme"
@@ -8498,7 +8498,7 @@ msgid ""
"
%1"
""
-"
"
"
%1"
""
-"
"
" "
"
"
" "
-"
"
"
Upozorenje: Klikom na ovo dugme bez prethodnog ravljenja " "'selektivnog pogleda' će izazvati da svi štampači nestanu iz pogleda. Da " "biste ih ponovo vidjeli, samo ponovo kliknite na isto dugme.
" #: kprintdialog.cpp:154 msgid "" -"This button starts the KDE Add Printer Wizard.
" +"This button starts the TDE Add Printer Wizard.
" "Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.
" -"Note: The KDE Add Printer Wizard does not " +"
Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)
Ovo dugme pokreće KDE čarobnjak za dodavanje štampača.
" +"Ovo dugme pokreće TDE čarobnjak za dodavanje štampača.
" "Koristi Čarobnjak(sa \"CUPS\" ili \"RLPR\"" ") da dodate lokalne štampače na Vaš sistem.
" -"Napomena:KDE čarobnjak za dodavanje štampača ne " +"
Napomena:TDE čarobnjak za dodavanje štampača ne " "radi, i ovo dugme je onemogućeno ako koristite \"Generic LPD\", " "\"LPRng\", ili \"Štampaj preko vanjskog programa.\".)
This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "
Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o job-billing=... # example: \"Marketing_Department\" or "
"\"Joe_Doe\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o job-hold-until=... # example: \"indefinite\" or \"no-hold\" "
"
They contain any string you type into the line edit field.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-label=\"...\" # example: \"Company Confidential\"
"
"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o job-priority=... # example: \"10\" or \"66\" or \"99\"
"
"
The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o cpi=... # example: \"8\" or \"12\"
Osnovna vrijednost je 10, što znači da je font razvučen tako da će se 10 " "znakova po inču štampati.
" "Dodatni savjet za moćne korisnike:Ovaj KDE Print GUI elemenat se "
+" Dodatni savjet za moćne korisnike:Ovaj TDE Print GUI elemenat se "
"podudara sa CUPS parametrom komandne linije: "
" -o cpi=... # primjer: \"8\" ili \"12\"
The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o lpi=... # example \"5\" or \"7\"
Osnovna vrijednost je 6, što znači da je font razvučen tako da će se 6 " "linija po inču štampati.
" "Dodatni savjer za moćne korisnike:Ovaj KDE Print GUI elemenat se "
+" Dodatni savjer za moćne korisnike:Ovaj TDE Print GUI elemenat se "
"podudara sa CUPS parametrom komandne linije: "
" -o lpi=... # primjer \"5\" ili \"7\"
The default value is 1, meaning that only one column of text per page will " "be printed.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o columns=... # example: \"2\" or \"4\"
Osnovna vrijednost je 1, što znači da će samo jedna kolona biti printana po " "stranici.
" "Dodatni savjet za moćne korisnike:Ovaj KDE Print GUI elemenat se "
+" Dodatni savjet za moćne korisnike:Ovaj TDE Print GUI elemenat se "
"podudara sa CUPS parametrom komandne linije: "
" -o columns=... # primjer: \"2\" ili \"4\"
These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.
" "Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.
. " "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" Margins These settings control the margins of printouts on the paper. They are not "
"valid for jobs originating from applications which define their own page "
-"layout internally and send PostScript to KDEPrint (such as KOffice or "
+"layout internally and send PostScript to TDEPrint (such as KOffice or "
"OpenOffice.org). When printing from KDE applications, such as KMail and Konqueror, or "
+" When printing from TDE applications, such as KMail and Konqueror, or "
"printing an ASCII text file through kprinter, you can choose your preferred "
"margin settings here. Margins may be set individually for each edge of the paper. The combo box at "
@@ -1540,7 +1540,7 @@ msgid ""
" You can even use the mouse to grab one margin and drag it to the intended "
"position (see the preview picture on the right side). Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o cpi=... # example: \"8\" or \"12\" "
"
-o lpi=... # example: \"5\" or \"7\" "
@@ -1529,9 +1529,9 @@ msgid ""
"
"
-" -o page-top=... # example: \"72\" "
"
pre-filter on the Filters tab.
-o page-bottom=... # example: \"24\" "
@@ -1561,7 +1561,7 @@ msgid ""
"enscript
"
"
"
-" -o prettyprint=true.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o prettyprint=false
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o prettyprint=true. "
"
-o prettyprint=false
Note: the fields must not include spaces, tabs or quotes. You may " "need to double-click on a field to edit it. " "
Warning: Do not use such standard CUPS option names which also can be " -"used through the KDEPrint GUI. Results may be unpredictable if they conflict, " +"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " " or if they are sent multiple times. For all options supported by the GUI, " "please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " "option name.)
" @@ -1911,7 +1911,7 @@ msgid "" "colors defined in the HP-GL/2 reference manual from Hewlett Packard. " "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o blackplot=true
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o fitplot=true
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o penwidth=... # example: \"2000\" or \"500\"
All options on this page are only applicable if you use KDEPrint to send " +"
All options on this page are only applicable if you use TDEPrint to send " "HP-GL and HP-GL/2 files to one of your printers.
" "HP-GL and HP-GL/2 are page description languages developed by " "Hewlett-Packard to drive Pen Plotting devices.
" -"KDEPrint can (with the help of CUPS) convert the HP-GL file format and print " +"
TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " "it on any installed printer.
" "Note 1: To print HP-GL files, start 'kprinter' and simply load the " "file into the running kprinter.
" @@ -1969,7 +1969,7 @@ msgid "" "1.1.22). " "Additional hint for power users: These KDEPrint GUI elements "
+" Additional hint for power users: These TDEPrint GUI elements "
"match with CUPS commandline job option parameters: "
" -o blackplot=... # examples: \"true\" or \"false\" "
"
-o fitplot=... # examples: \"true\" or \"false\" "
@@ -2211,7 +2211,7 @@ msgid ""
"lighten the print. Values less than 100 will darken the print.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o brightness=... # use range from \"0\" to \"200\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o hue=... # use range from \"-360\" to \"360\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o saturation=... # use range from \"0\" to \"200\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o gamma=... # use range from \"1\" to \"3000\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o natural-scaling=... # range in % is 1....800 "
"
-o scaling=... # range in % is 1....800 "
@@ -2409,7 +2409,7 @@ msgid ""
"paper printout. Default is 'center'.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o position=... # examples: \"top-left\" or \"bottom\"
"
"
%1
" #: management/kaddprinterwizard.cpp:10 -msgid "Configure KDE Print" -msgstr "Podesi KDE štampu" +msgid "Configure TDE Print" +msgstr "Podesi TDE štampu" #: management/kaddprinterwizard.cpp:11 msgid "Configure print server" @@ -3353,8 +3353,8 @@ msgid "" msgstr "Ne mogu pokrenuti pravljenje baze drajvera. Izvršenje %1 nije uspjelo." #: management/kmdbcreator.cpp:113 -msgid "Please wait while KDE rebuilds a driver database." -msgstr "Molimo sačekajte dok KDE izgradi bazu drajvera." +msgid "Please wait while TDE rebuilds a driver database." +msgstr "Molimo sačekajte dok TDE izgradi bazu drajvera." #: management/kmdbcreator.cpp:114 msgid "Driver Database" @@ -3428,8 +3428,8 @@ msgid "Change..." msgstr "Promijeni..." #: management/kmconfigdialog.cpp:38 -msgid "KDE Print Configuration" -msgstr "Postavke KDE štampe" +msgid "TDE Print Configuration" +msgstr "Postavke TDE štampe" #: management/kmwdriver.cpp:33 msgid "Printer Model Selection" @@ -3582,10 +3582,10 @@ msgstr " sek" #: management/kmconfiggeneral.cpp:53 msgid "" -"This time setting controls the refresh rate of various KDE Print " +"This time setting controls the refresh rate of various TDE Print " "components like the print manager and the job viewer." msgstr "" -"Ova postavka vremena određuje brzinu osvježavanja na raznim KDE Print " +"Ova postavka vremena određuje brzinu osvježavanja na raznim TDE Print " "komponentama kao što su menadžer štampe ili preglednik zadataka." #: management/kmconfiggeneral.cpp:57 @@ -3731,13 +3731,13 @@ msgstr "" #: management/kmconfigfonts.cpp:89 msgid "" -"When using font embedding you can select additional directories where KDE " +"When using font embedding you can select additional directories where TDE " "should search for embeddable font files. By default, the X server font path is " "used, so adding those directories is not needed. The default search path should " "be sufficient in most cases." msgstr "" "Kada koristite ugrađivanje fontova, možete izabrati dodatne direktorije gdje " -"KDE treba tražiti ugradive datoteke fontova. Podrazumjevano je korištenje staze " +"TDE treba tražiti ugradive datoteke fontova. Podrazumjevano je korištenje staze " "fontova X servera, tako da ne trebate dodavati te direktorije. Podrazumjevani " "put pretrage bi trebao biti dovoljan u većini slučajeva" @@ -4134,7 +4134,7 @@ msgid "" "We hope you'll enjoy this tool!
" "Dobro došli,
" "Nadamo se da ćete uživati u ovom alatu !
" -"KDE printing team.
" +"TDE printing team.
" #: management/kmdriverdbwidget.cpp:51 msgid "&PostScript printer" @@ -4642,13 +4642,13 @@ msgid "" "This button tries to open the highlighted file, so you can view or edit it " "before you send it to the printing system.
" -"If you open files, KDEPrint will use the application matching the MIME type " +"
If you open files, TDEPrint will use the application matching the MIME type " "of the file.
Ovo dugme pokušava da otvori istaknutu datoteku tako da možete da je vidite " "ili izmijenite prije nego što je pošaljete na sistem za štampu.
" -"Ako otvarate datoteke, KDEPrint će koristiti odgovarajući program za MIME " +"
Ako otvarate datoteke, TDEPrint će koristiti odgovarajući program za MIME " "tip te datoteke.
This list displays all the files you selected for printing. You can see the " "file name(s), file path(s) and the file (MIME) type(s) as determined by " -"KDEPrint. You may re-arrange the initial order of the list with the help of " +"TDEPrint. You may re-arrange the initial order of the list with the help of " "the arrow buttons on the right.
" "The files will be printed as a single job, in the same order as displayed in " "the list.
" @@ -4664,19 +4664,19 @@ msgid "" "locations. The files may be of multiple MIME types. The buttons on the right " "side let you add more files, remove already selected files from the list, " "re-order the list (by moving files up or down), and open files. If you open " -"files, KDEPrint will use the application matching the MIME type of the file. " +"files, TDEPrint will use the application matching the MIME type of the file. " "Ova lista prikazuje sve datoteke koje ste odabrali za štampanje. Možete " -"vidjeti imena, putanje i MIME tipove datoteka koje je odredio KDEPrint. Početni " +"vidjeti imena, putanje i MIME tipove datoteka koje je odredio TDEPrint. Početni " "redoslijed u listi je vaš početni izbor.
" "Lista će biti štampana onim redom kako je konačno prikazana.
" "Napomena: Možete odabrati više datoteka. Datoteke se mogu nalaziti na " "različitim mjestima. Mogu biti i različitih MIME tipova. Dugmad sa desne strane " "vam omogućavaju da dodate još datoteka, uklonite već dodate se liste, " "preuredite listu (pomijeranjem datoteka gore/dolje), te da otvorate datoteke. " -"Ako otvarate datoteke, KDEPrint će koristiti program za odgovarajući MIME tip " +"Ako otvarate datoteke, TDEPrint će koristiti program za odgovarajući MIME tip " "te datoteke.
This combo box shows (and lets you select) a print subsystem to be used by " -"KDEPrint. (This print subsystem must, of course, be installed inside your " -"Operating System.) KDEPrint usually auto-detects the correct print subsystem by " +"TDEPrint. (This print subsystem must, of course, be installed inside your " +"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " "itself upon first startup. Most Linux distributions have \"CUPS\", the " "Common UNIX Printing System.
Note. The number of available job options depends strongly on the " "actual driver used for your print queue. 'Raw' " "queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by KDEPrint, and thus is not present in the kprinter dialog.
" +"loaded by TDEPrint, and thus is not present in the kprinter dialog. " msgstr "" #: driverview.cpp:71 @@ -4788,7 +4788,7 @@ msgid "" "Note. The number of available job options depends strongly on the " "actual driver used for your print queue. 'Raw' " "queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by KDEPrint, and thus is not present in the kprinter dialog.
" +"loaded by TDEPrint, and thus is not present in the kprinter dialog. " msgstr "" #: kprinter.cpp:280 @@ -4847,8 +4847,8 @@ msgstr "Paralelni port #%1" #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 #, c-format -msgid "Unable to load KDE print management library: %1" -msgstr "Ne mogu učitati KDEovu biblioteku za upravljanje štampom:Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o PageSize=... # examples: \"A4\" or \"Letter\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o MediaType=... # example: \"Transparency\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" "
"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o orientation-requested=... # examples: \"landscape\" or "
"\"reverse-portrait\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" "
"
CUPS comes with a selection of banner pages.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o job-sheets=... # examples: \"standard\" or \"topsecret\" "
"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o number-up=... # examples: \"2\" or \"4\"
%2
" #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" -"Neke od datoteka za štampu nisu čitljive za KDE print demon. Ovo se može desiti " +"Neke od datoteka za štampu nisu čitljive za TDE print demon. Ovo se može desiti " "ako pokušavate štampati kao korisnik različit od onoga koji je prijavljen. Za " "nastavak štampanja, morate navesti root šifru." @@ -5394,16 +5394,16 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" "Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.
" +"Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.
Izaberite \"Trenutna\" ako želite da štampate samo trenutno " -"vidljivu stranicu vašem u KDE programu.
" -"Napomena: ovo polje je isključeno ako štampate iz ne-KDE programa kao " -"što su Mozila ili OpenOffice.org, pošto u tim slučajevima KDEPrint nema načina " +"vidljivu stranicu vašem u TDE programu.
" +"Napomena: ovo polje je isključeno ako štampate iz ne-TDE programa kao " +"što su Mozila ili OpenOffice.org, pošto u tim slučajevima TDEPrint nema načina " "da odredi koju stranicu dokumenta trenutno gledate.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-ranges=... # example: \"4,6,10-13,17,20,23-25\"
"
"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-set=... # example: \"odd\" or \"even\"
The 'Copies' setting defaults to 1.
" "Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o copies=... # examples: \"5\" or \"42\" "
"
-o outputorder=... # example: \"reverse\" "
@@ -5488,7 +5488,7 @@ msgid ""
"and down arrows. You can also type the figure directly into the box.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o copies=... # examples: \"5\" or \"42\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o Collate=... # example: \"true\" or \"false\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o outputorder=... # example: \"reverse\"
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-top=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-bottom=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
"
@@ -5743,7 +5743,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-left=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
"
@@ -5764,7 +5764,7 @@ msgid ""
"PDF file, which in most cases have their margins hardcoded internally.
Additional hint for power users: This KDEPrint GUI element "
+" Additional hint for power users: This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter: "
" -o page-right=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
"
@@ -5792,7 +5792,7 @@ msgid ""
"The margin setting does not work if you load such files directly into "
"kprinter, which have their print margins hardcoded internally, like as most "
"PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not work with non-KDE applications which fail to fully utilize the KDEPrint "
+"not work with non-TDE applications which fail to fully utilize the TDEPrint "
"framework, such as OpenOffice.org.
This tab is only visible if the external 'poster' " -"utility is discovered by KDEPrint on your system. ['poster' " +"utility is discovered by TDEPrint on your system. ['poster' " "is a commandline utility that enables you to convert PostScript files into " "tiled printouts which allow for oversized appearance of the stitched-together " "tiles.]
" @@ -5880,7 +5880,7 @@ msgid "" "must use a patched version of 'poster'. Ask your operating system vendor to " "provide a patched version of 'poster' if he does not already. " "Additional hint for power users: A patched version of 'poster' is "
-"available from the KDEPrint Website "
+"available from the TDEPrint Website "
"at http://printing.kde.org/downloads/"
"a>. The direct link to the patched source tarball is Add Filter button "
" This button calls a little dialog to let you select a filter here. Note 1: You can chain different filters as long as you make sure "
-"that the output of one fits as input of the next. (KDEPrint checks your "
+"that the output of one fits as input of the next. (TDEPrint checks your "
"filtering chain and will warn you if you fail to do so. Note 2: The filters you define here are applied to your jobfile "
"before it is handed downstream to your spooler and print subsystem "
@@ -6092,7 +6092,7 @@ msgid ""
" This field shows some general info about the selected filter. Amongst them "
"are: "
" This field shows which filters are currently selected to act as "
-"'pre-filters' for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters' for TDEPrint. Pre-filters are processing the print files "
"before they are send downstream to your real print subsystem. The list shown in this field may be empty (default). The pre-filters act on the printjob in the order they are listed (from top "
@@ -6119,13 +6119,13 @@ msgid ""
"example: if your file is ASCII text, and you want the output being processed "
"by the 'Multipage per Sheet' filter, the first filter must be one that "
"processes ASCII into PostScript. KDEPrint can utilize any external filtering program which you may "
+" TDEPrint can utilize any external filtering program which you may "
"find useful through this interface. KDEPrint ships preconfigured with support for a selection of common filters. "
-"These filters however need to be installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+" TDEPrint ships preconfigured with support for a selection of common filters. "
+"These filters however need to be installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
"as CUPS, LPRng and LPD), because they are not depending on these. Amongst the pre-configured filters shipping with KDEPrint are: Amongst the pre-configured filters shipping with TDEPrint are: "
-"
"
"
Please click on the other elements of this dialog to learn more about the " -"KDEPrint pre-filters.
" +"TDEPrint pre-filters. " msgstr "" #: kpfilterpage.cpp:125 @@ -6186,7 +6186,7 @@ msgid "" "