From fc97fe90e4f90a1bfc488c57843cdcb087806b71 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 22 Jan 2012 01:02:30 -0600 Subject: Part 2 of prior commit --- .../docs/tdebase/kcontrol/kdm/Makefile.am | 4 - .../docs/tdebase/kcontrol/kdm/Makefile.in | 635 ---- .../docs/tdebase/kcontrol/kdm/index.cache.bz2 | Bin 6643 -> 0 bytes .../docs/tdebase/kcontrol/kdm/index.docbook | 722 ----- .../docs/tdebase/kcontrol/tdm/Makefile.am | 4 + .../docs/tdebase/kcontrol/tdm/Makefile.in | 635 ++++ .../docs/tdebase/kcontrol/tdm/index.cache.bz2 | Bin 0 -> 6643 bytes .../docs/tdebase/kcontrol/tdm/index.docbook | 722 +++++ tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am | 4 - tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in | 635 ---- tde-i18n-en_GB/docs/tdebase/kdm/index.cache.bz2 | Bin 28371 -> 0 bytes tde-i18n-en_GB/docs/tdebase/kdm/index.docbook | 1812 ----------- tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook | 3221 -------------------- tde-i18n-en_GB/docs/tdebase/tdm/Makefile.am | 4 + tde-i18n-en_GB/docs/tdebase/tdm/Makefile.in | 635 ++++ tde-i18n-en_GB/docs/tdebase/tdm/index.cache.bz2 | Bin 0 -> 28371 bytes tde-i18n-en_GB/docs/tdebase/tdm/index.docbook | 1812 +++++++++++ tde-i18n-en_GB/docs/tdebase/tdm/tdmrc-ref.docbook | 3221 ++++++++++++++++++++ 18 files changed, 7033 insertions(+), 7033 deletions(-) delete mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am delete mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in delete mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.cache.bz2 delete mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook create mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.am create mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.in create mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.cache.bz2 create mode 100644 tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.docbook delete mode 100644 tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am delete mode 100644 tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in delete mode 100644 tde-i18n-en_GB/docs/tdebase/kdm/index.cache.bz2 delete mode 100644 tde-i18n-en_GB/docs/tdebase/kdm/index.docbook delete mode 100644 tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook create mode 100644 tde-i18n-en_GB/docs/tdebase/tdm/Makefile.am create mode 100644 tde-i18n-en_GB/docs/tdebase/tdm/Makefile.in create mode 100644 tde-i18n-en_GB/docs/tdebase/tdm/index.cache.bz2 create mode 100644 tde-i18n-en_GB/docs/tdebase/tdm/index.docbook create mode 100644 tde-i18n-en_GB/docs/tdebase/tdm/tdmrc-ref.docbook (limited to 'tde-i18n-en_GB/docs') diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am deleted file mode 100644 index 2023c680fbe..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am +++ /dev/null @@ -1,4 +0,0 @@ -KDE_LANG = en_GB -SUBDIRS = $(AUTODIRS) -KDE_DOCS = kcontrol/tdm -KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in deleted file mode 100644 index 2a3ff33fc09..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in +++ /dev/null @@ -1,635 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# KDE tags expanded automatically by am_edit - $Revision: 483858 $ -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = docs/tdebase/kcontrol/tdm -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.in -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ -#>- html-recursive info-recursive install-data-recursive \ -#>- install-dvi-recursive install-exec-recursive \ -#>- install-html-recursive install-info-recursive \ -#>- install-pdf-recursive install-ps-recursive install-recursive \ -#>- installcheck-recursive installdirs-recursive pdf-recursive \ -#>- ps-recursive uninstall-recursive -#>+ 7 -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 1 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -ARTSCCONFIG = @ARTSCCONFIG@ -AUTOCONF = @AUTOCONF@ -AUTODIRS = @AUTODIRS@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CONF_FILES = @CONF_FILES@ -CYGPATH_W = @CYGPATH_W@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOPIDLNG = @DCOPIDLNG@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DEFS = @DEFS@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -GMSGFMT = @GMSGFMT@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ -KCONFIG_COMPILER = @KCONFIG_COMPILER@ -KDECONFIG = @KDECONFIG@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_RPATH = @KDE_RPATH@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XMLLINT = @XMLLINT@ -X_RPATH = @X_RPATH@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -am__leading_dot = @am__leading_dot@ -am__tar = @am__tar@ -am__untar = @am__untar@ -#>- bindir = @bindir@ -#>+ 2 -DEPDIR = .deps -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_kcfgdir = @kde_kcfgdir@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_styledir = @kde_styledir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -kde_widgetdir = @kde_widgetdir@ -tdeinitdir = @tdeinitdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -xdg_appsdir = @xdg_appsdir@ -xdg_directorydir = @xdg_directorydir@ -xdg_menudir = @xdg_menudir@ -KDE_LANG = en_GB -#>- SUBDIRS = $(AUTODIRS) -#>+ 1 -SUBDIRS =. -KDE_DOCS = kcontrol/tdm -KDE_MANS = AUTO -#>- all: all-recursive -#>+ 1 -all: docs-am all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -#>- @for dep in $?; do \ -#>- case '$(am__configure_deps)' in \ -#>- *$$dep*) \ -#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -#>- && exit 0; \ -#>- exit 1;; \ -#>- esac; \ -#>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile -#>+ 12 - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -#>- distdir: $(DISTFILES) -#>+ 1 -distdir: distdir-nls $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -#>- uninstall: uninstall-recursive -#>+ 1 -uninstall: uninstall-docs uninstall-nls uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic mostlyclean-am -#>+ 1 -clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -#>- install-data-am: -#>+ 1 -install-data-am: install-docs install-nls - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ - tags-recursive uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - -#>+ 2 -KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 - -#>+ 24 -index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook - @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi - -docs-am: index.cache.bz2 - -install-docs: docs-am install-nls - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm - @if test -f index.cache.bz2; then \ - echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ - $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ - elif test -f $(srcdir)/index.cache.bz2; then \ - echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ - $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ - fi - -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common - $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common - -uninstall-docs: - -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm - -clean-docs: - -rm -f index.cache.bz2 - - -#>+ 13 -install-nls: - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm - @for base in index.docbook ; do \ - echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ - $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ - done - -uninstall-nls: - for base in index.docbook ; do \ - rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ - done - - -#>+ 5 -distdir-nls: - for file in index.docbook ; do \ - cp $(srcdir)/$$file $(distdir); \ - done - -#>+ 15 -force-reedit: - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in - - -#>+ 21 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class a.out - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - rm -f a.out; \ - fi ; \ - done - - -#>+ 3 -final: - $(MAKE) all-am - -#>+ 3 -final-install: - $(MAKE) install-am - -#>+ 3 -no-final: - $(MAKE) all-am - -#>+ 3 -no-final-install: - $(MAKE) install-am - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.cache.bz2 b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.cache.bz2 deleted file mode 100644 index 0de6ad469c1..00000000000 Binary files a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.cache.bz2 and /dev/null differ diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook deleted file mode 100644 index a54991df318..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook +++ /dev/null @@ -1,722 +0,0 @@ - - - -]> - -
- - - -&Thomas.Tanghus; &Thomas.Tanghus.mail; -&Steffen.Hansen; &Steffen.Hansen.mail; -&Mike.McBride; &Mike.McBride.mail; -JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English - - -2002-02-13 -3.00.00 - - -KDE -KControl -TDM configuration -login manager -login - - - - -Login Manager - -Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. - -In order to organise all of these options, this module is divided into five sections: Appearance, Font, Background, Sessions, Users and Convenience. - -You can switch between the sections using the tabs at the top of the window. - -If you are not currently logged in as a superuser, you will need to click the Administrator Mode Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. - - -Appearance - -From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. - -The greeting string is the title of the login screen. If the string contains the word HOSTNAME it will be translated to the domainless name of the machine &tdm; is installed on. - -You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled Logo area. Using the Positions setting, you can choose to either centre the content of the logo area or to position it using fixed coordinates. - -If you chose Show logo you can now choose a logo: - - - -Drop an image file on the image button. - - -Click on the image button and select a new image from the image chooser dialogue. - - - -If you do not specify a logo the default $TDEDIR/share/apps/tdm/pics/kdelogo.png will be displayed. - -While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style option. - -Below that, you have two dropdown boxes to choose the language and the country for your login box. - - - - -Font - -From this section of the module you can change the fonts used in the login window. - -You can select three different font styles from the drop down box (Greeting, Fail, Standard). When you click on the Change font button a dialogue appears from which you can select the new characteristics for the font style. - - - -The Greeting font is the font used for the title (Greeting String). - - -The Fail font is used when a login fails. - - -The Standard font is used in all other places in the login window. - - - -An example of each font can be seen in the Example Box. - - - - -Background - -Here you can change the desktop background which will be displayed when a user logs in. You can have a single colour or an image as a background. If you have an image as the background and select centre, the selected background colour will be used around the image if it isn't large enough to cover the entire desktop. - -The background colours and effects are controlled by the options on the tab labelled Background and you select a background image and its placement from the options on the tab labelled Wallpaper. - -To change the default background colour(s) simply click either of the colour buttons and select a new colour. - -The dropdown box above the colour buttons provides you with several different blend effects. Choose one from the list, and it will be previewed on the small monitor at the top of the window. Your choices are: - - - -Flat -By choosing this mode, you select one colour (using the colour button labelled Colour 1), and the entire background is covered with this one colour. - - -Pattern -By choosing this mode, you select two colours (using both colour buttons). You then select a pattern by clicking Setup. This opens a new dialogue window, which gives you the opportunity to select a pattern. Simply click once on the pattern of your choice, then click on OK, and &kde; will render the pattern you selected using the two colours you selected. For more on patterns, see the section Background: Adding, Removing and Modifying Patterns. - - -Background Program -By selecting this option, you can have &kde; use an external program to determine the background. This can be any program of your choosing. For more information on this option, see the section entitled Background: Using an external program. - - -Horizontal Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the left edge of the screen, and slowly transform into the colour selected by Colour 2 by the time it gets to the right edge of the screen. - - -Vertical Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the top edge of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the bottom of the screen. - - -Pyramid Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. - - -Pipecross Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. The shape of this gradient is different then the pyramid gradient. - - -Elliptic Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 2 in the centre of the screen, and slowly transform into the colour selected by Colour 1 as it moves to the edges, in an elliptical pattern. - - - -The setup button is only needed for if you select Background program or Patterns. In these instances, another window will appear to configure the specifics. -Wallpaper -To select a new background image first, click on the Wallpapers tab, then you can either select an image from the drop-down list labelled Wallpaper or select Browse... and select an image file from a file selector. - -The image can be displayed in six different ways: - - -No wallpaper -No image is displayed. Just the background colours. - - -Centred -The image will be centred on the screen. The background colours will be present anywhere the image does not cover. - - -Tiled -The image will be duplicated until it fills the entire desktop. The first image will be placed in the upper left corner of the screen, and duplicated downward and to the right. - - -Centre Tiled -The image will be duplicated until it fills the entire desktop. The first image will be placed in the centre of the screen, and duplicated upward, downward to the right, and to the left. - - -Centred Maxpect -The image will be placed in the centre of the screen. It will be scaled to fit the desktop, but it will not change the aspect ratio of the original image. This will provide you with an image that is not distorted. - - -Scaled -The image will be scaled to fit the desktop. It will be stretched to fit all four corners. - - - - - - -Sessions - -Allow to shutdown -Use this dropdown box to choose who is allowed to shut down: - - -None: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command. - - -All: Everyone can shutdown the computer using &tdm;. - -Root only: &tdm; requires that the root password be entered before shutting down the computer. -Console only: The user must be at this console, to shut down the computer. - - -Commands -Use these 3 blanks to define the exact shutdown command. -The shutdown command defaults to: - -/sbin/shutdown - -The restart command defaults to: - -/sbin/reboot - -The Console mode (which restarts the computer as a console only terminal) defaults to: - -/sbin/init - -When Show boot options is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your lilo command and to lilo's map file. - - - -Session types - -Define which session types should be accessible from the login window. - -For more information on this subject, look at /etc/X11/xdm/Xsession to find your xdm setup files. Also review the xdm man pages, especially under the SESSION PROGRAM section. - -To add a session, type its name in the blank entitled New types, and click Add new. - -To remove a session, select the session from the list and click Remove. - - - - - - - -Users - -From here you can change the way users are represented in the login window. - -As you look on this window, you will see three lists (All users, selected users, and no-show users). You also see an image box, and a set of options along the right side of the window. - -The first thing you must decide, is if you are going to show users or not. - - -If you choose to show users, then the login window will show images (which you select), of a list of users. When someone is ready to login, they select their user name/image, enter their password, and they are granted access. - -If you choose not to show users, then the login window will be more traditional. Users will need to type their username, and password to gain entrance. This is the preferred way if you have many users on this terminal. - - -To show (and sort) or not to show users - -Along the right edge of the window are two check boxes: - -If Show users is selected, you have chosen to show images of users, instead of making them type their login name. - -If Sort users is selected, then the list of users will be sorted alphabetically in the login window. If unchecked, users will be listed in the same order as they are on this page. If Show users is not checked, this has no effect. - - - - -How to determine which users to show and which users to hide - -Below the user image box, and above the Show users check box, is a set of two radio buttions: - - -Show only selected users: If this option is selected, only the users contained in the list labelled Selected Users, will be displayed in the login window. If Show users is not checked, this has no effect. -Show all users but no-show users: If this option is selected, all users will be listed, except those users contained in the list entitled No show users. If Show users is not checked, this has no effect. - - - - - -Select users - -This page contains three listboxes. The large listbox on the left shows all the users on the system which might be a genuine user. - -The top rightmost listbox shows the selected users and the bottom rightmost listbox shows the users we don't want displayed in the login window. - -To move a user from one listbox to another you click on the username in the listbox and click >> to move the user from the leftmost box the the rightmost box or << to move the user from the rightmost box to the leftmost box. - - - - -Images - -This section of the manual only applies if Show users is selected. If it is not, this image box has no effect. - -Every user on the system can be represented by a image. The image for the user is kept in a file called $TDEDIR/share/apps/tdm/pics/users/$USER.xpm. If the user doesn't have such a file the file $TDEDIR/share/apps/tdm/pics/users/default.xpm will be used instead. - -To assign a new image to a user just select the user in one of the listboxes and either drop an imagefile on the image button to the right or click on the image button and select a new image from the image selector. - -If no user is currently selected you will be asked if you want to change the default image. - -The replacement is performed by a &konqueror; process so if the image file already exists you will be prompted by &konqueror; if you want to replace it. If you confirm the image will be replaced - you will not have to press the Apply button. - - - - - - -Convenience - -In the convenience tab you can configure some options that make life easier for lazy people, like auto login or disabling passwords. - -Please think more than twice before using these options. Every option in the convenience tab is well-suited to seriously compromise your system security. Practically, these options are only to be used in a completely non-critical environment, ⪚ a private computer at home. - - -Automatic Login - -Automatic login will give anyone access to a certain account on your system without doing any authentication. You can enable it using the option Enable auto-login. - -Automatic login comes in two flavours: truly automatic login acts like you would expect automatic login to, &ie; &tdm; will automatically login without expecting any input from the user. Enable this using the Truly automatic login option. If this option is not enabled, &tdm; will start normally, enabling you to login as any user, and will only perform automatic login if you kill the X server, ⪚ by pressing &Ctrl;&Alt;Backspace. - -You can choose the account to be used for automatic login in the list below. - - - - -Password-less Login - -Using this feature, you can allow certain users to login without having to provide their password. Enable this feature using the Enable password-less logins option. - -Below this option you will see a list of users for which a password is required, as well as a (by default, empty) list of users that do not need to provide a password. When Enable password-less logins is enabled, you can move users from one list into the other, by selecting them and then clicking the >> and << buttons. - -Again, this option should only be used in a safe environment. If you enable it on a rather public system you should take care that only users with heavy access restrictions are granted password-less login, ⪚ guest. - -The Automatically login after X server crash option allows you to skip the authentication procedure when your X server accidentally crashed. Show previous user will show the name of the last login already entered into the login field in &tdm;. Some site administrators would consider even this a possible security weakness, because potential attackers then know at least one valid login. - - - - - - - - -
diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.am new file mode 100644 index 00000000000..2023c680fbe --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = en_GB +SUBDIRS = $(AUTODIRS) +KDE_DOCS = kcontrol/tdm +KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.in new file mode 100644 index 00000000000..2a3ff33fc09 --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdebase/kcontrol/tdm +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = en_GB +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = kcontrol/tdm +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.cache.bz2 b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.cache.bz2 new file mode 100644 index 00000000000..0de6ad469c1 Binary files /dev/null and b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.cache.bz2 differ diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.docbook new file mode 100644 index 00000000000..a54991df318 --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/tdm/index.docbook @@ -0,0 +1,722 @@ + + + +]> + +
+ + + +&Thomas.Tanghus; &Thomas.Tanghus.mail; +&Steffen.Hansen; &Steffen.Hansen.mail; +&Mike.McBride; &Mike.McBride.mail; +JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English + + +2002-02-13 +3.00.00 + + +KDE +KControl +TDM configuration +login manager +login + + + + +Login Manager + +Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. + +In order to organise all of these options, this module is divided into five sections: Appearance, Font, Background, Sessions, Users and Convenience. + +You can switch between the sections using the tabs at the top of the window. + +If you are not currently logged in as a superuser, you will need to click the Administrator Mode Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. + + +Appearance + +From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. + +The greeting string is the title of the login screen. If the string contains the word HOSTNAME it will be translated to the domainless name of the machine &tdm; is installed on. + +You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled Logo area. Using the Positions setting, you can choose to either centre the content of the logo area or to position it using fixed coordinates. + +If you chose Show logo you can now choose a logo: + + + +Drop an image file on the image button. + + +Click on the image button and select a new image from the image chooser dialogue. + + + +If you do not specify a logo the default $TDEDIR/share/apps/tdm/pics/kdelogo.png will be displayed. + +While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style option. + +Below that, you have two dropdown boxes to choose the language and the country for your login box. + + + + +Font + +From this section of the module you can change the fonts used in the login window. + +You can select three different font styles from the drop down box (Greeting, Fail, Standard). When you click on the Change font button a dialogue appears from which you can select the new characteristics for the font style. + + + +The Greeting font is the font used for the title (Greeting String). + + +The Fail font is used when a login fails. + + +The Standard font is used in all other places in the login window. + + + +An example of each font can be seen in the Example Box. + + + + +Background + +Here you can change the desktop background which will be displayed when a user logs in. You can have a single colour or an image as a background. If you have an image as the background and select centre, the selected background colour will be used around the image if it isn't large enough to cover the entire desktop. + +The background colours and effects are controlled by the options on the tab labelled Background and you select a background image and its placement from the options on the tab labelled Wallpaper. + +To change the default background colour(s) simply click either of the colour buttons and select a new colour. + +The dropdown box above the colour buttons provides you with several different blend effects. Choose one from the list, and it will be previewed on the small monitor at the top of the window. Your choices are: + + + +Flat +By choosing this mode, you select one colour (using the colour button labelled Colour 1), and the entire background is covered with this one colour. + + +Pattern +By choosing this mode, you select two colours (using both colour buttons). You then select a pattern by clicking Setup. This opens a new dialogue window, which gives you the opportunity to select a pattern. Simply click once on the pattern of your choice, then click on OK, and &kde; will render the pattern you selected using the two colours you selected. For more on patterns, see the section Background: Adding, Removing and Modifying Patterns. + + +Background Program +By selecting this option, you can have &kde; use an external program to determine the background. This can be any program of your choosing. For more information on this option, see the section entitled Background: Using an external program. + + +Horizontal Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the left edge of the screen, and slowly transform into the colour selected by Colour 2 by the time it gets to the right edge of the screen. + + +Vertical Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the top edge of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the bottom of the screen. + + +Pyramid Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. + + +Pipecross Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. The shape of this gradient is different then the pyramid gradient. + + +Elliptic Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 2 in the centre of the screen, and slowly transform into the colour selected by Colour 1 as it moves to the edges, in an elliptical pattern. + + + +The setup button is only needed for if you select Background program or Patterns. In these instances, another window will appear to configure the specifics. +Wallpaper +To select a new background image first, click on the Wallpapers tab, then you can either select an image from the drop-down list labelled Wallpaper or select Browse... and select an image file from a file selector. + +The image can be displayed in six different ways: + + +No wallpaper +No image is displayed. Just the background colours. + + +Centred +The image will be centred on the screen. The background colours will be present anywhere the image does not cover. + + +Tiled +The image will be duplicated until it fills the entire desktop. The first image will be placed in the upper left corner of the screen, and duplicated downward and to the right. + + +Centre Tiled +The image will be duplicated until it fills the entire desktop. The first image will be placed in the centre of the screen, and duplicated upward, downward to the right, and to the left. + + +Centred Maxpect +The image will be placed in the centre of the screen. It will be scaled to fit the desktop, but it will not change the aspect ratio of the original image. This will provide you with an image that is not distorted. + + +Scaled +The image will be scaled to fit the desktop. It will be stretched to fit all four corners. + + + + + + +Sessions + +Allow to shutdown +Use this dropdown box to choose who is allowed to shut down: + + +None: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command. + + +All: Everyone can shutdown the computer using &tdm;. + +Root only: &tdm; requires that the root password be entered before shutting down the computer. +Console only: The user must be at this console, to shut down the computer. + + +Commands +Use these 3 blanks to define the exact shutdown command. +The shutdown command defaults to: + +/sbin/shutdown + +The restart command defaults to: + +/sbin/reboot + +The Console mode (which restarts the computer as a console only terminal) defaults to: + +/sbin/init + +When Show boot options is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your lilo command and to lilo's map file. + + + +Session types + +Define which session types should be accessible from the login window. + +For more information on this subject, look at /etc/X11/xdm/Xsession to find your xdm setup files. Also review the xdm man pages, especially under the SESSION PROGRAM section. + +To add a session, type its name in the blank entitled New types, and click Add new. + +To remove a session, select the session from the list and click Remove. + + + + + + + +Users + +From here you can change the way users are represented in the login window. + +As you look on this window, you will see three lists (All users, selected users, and no-show users). You also see an image box, and a set of options along the right side of the window. + +The first thing you must decide, is if you are going to show users or not. + + +If you choose to show users, then the login window will show images (which you select), of a list of users. When someone is ready to login, they select their user name/image, enter their password, and they are granted access. + +If you choose not to show users, then the login window will be more traditional. Users will need to type their username, and password to gain entrance. This is the preferred way if you have many users on this terminal. + + +To show (and sort) or not to show users + +Along the right edge of the window are two check boxes: + +If Show users is selected, you have chosen to show images of users, instead of making them type their login name. + +If Sort users is selected, then the list of users will be sorted alphabetically in the login window. If unchecked, users will be listed in the same order as they are on this page. If Show users is not checked, this has no effect. + + + + +How to determine which users to show and which users to hide + +Below the user image box, and above the Show users check box, is a set of two radio buttions: + + +Show only selected users: If this option is selected, only the users contained in the list labelled Selected Users, will be displayed in the login window. If Show users is not checked, this has no effect. +Show all users but no-show users: If this option is selected, all users will be listed, except those users contained in the list entitled No show users. If Show users is not checked, this has no effect. + + + + + +Select users + +This page contains three listboxes. The large listbox on the left shows all the users on the system which might be a genuine user. + +The top rightmost listbox shows the selected users and the bottom rightmost listbox shows the users we don't want displayed in the login window. + +To move a user from one listbox to another you click on the username in the listbox and click >> to move the user from the leftmost box the the rightmost box or << to move the user from the rightmost box to the leftmost box. + + + + +Images + +This section of the manual only applies if Show users is selected. If it is not, this image box has no effect. + +Every user on the system can be represented by a image. The image for the user is kept in a file called $TDEDIR/share/apps/tdm/pics/users/$USER.xpm. If the user doesn't have such a file the file $TDEDIR/share/apps/tdm/pics/users/default.xpm will be used instead. + +To assign a new image to a user just select the user in one of the listboxes and either drop an imagefile on the image button to the right or click on the image button and select a new image from the image selector. + +If no user is currently selected you will be asked if you want to change the default image. + +The replacement is performed by a &konqueror; process so if the image file already exists you will be prompted by &konqueror; if you want to replace it. If you confirm the image will be replaced - you will not have to press the Apply button. + + + + + + +Convenience + +In the convenience tab you can configure some options that make life easier for lazy people, like auto login or disabling passwords. + +Please think more than twice before using these options. Every option in the convenience tab is well-suited to seriously compromise your system security. Practically, these options are only to be used in a completely non-critical environment, ⪚ a private computer at home. + + +Automatic Login + +Automatic login will give anyone access to a certain account on your system without doing any authentication. You can enable it using the option Enable auto-login. + +Automatic login comes in two flavours: truly automatic login acts like you would expect automatic login to, &ie; &tdm; will automatically login without expecting any input from the user. Enable this using the Truly automatic login option. If this option is not enabled, &tdm; will start normally, enabling you to login as any user, and will only perform automatic login if you kill the X server, ⪚ by pressing &Ctrl;&Alt;Backspace. + +You can choose the account to be used for automatic login in the list below. + + + + +Password-less Login + +Using this feature, you can allow certain users to login without having to provide their password. Enable this feature using the Enable password-less logins option. + +Below this option you will see a list of users for which a password is required, as well as a (by default, empty) list of users that do not need to provide a password. When Enable password-less logins is enabled, you can move users from one list into the other, by selecting them and then clicking the >> and << buttons. + +Again, this option should only be used in a safe environment. If you enable it on a rather public system you should take care that only users with heavy access restrictions are granted password-less login, ⪚ guest. + +The Automatically login after X server crash option allows you to skip the authentication procedure when your X server accidentally crashed. Show previous user will show the name of the last login already entered into the login field in &tdm;. Some site administrators would consider even this a possible security weakness, because potential attackers then know at least one valid login. + + + + + + + + +
diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am deleted file mode 100644 index bd0d1eb0c27..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am +++ /dev/null @@ -1,4 +0,0 @@ -KDE_LANG = en_GB -SUBDIRS = $(AUTODIRS) -KDE_DOCS = tdm -KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in deleted file mode 100644 index d9e7e8726f1..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in +++ /dev/null @@ -1,635 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# KDE tags expanded automatically by am_edit - $Revision: 483858 $ -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = docs/tdebase/tdm -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.in -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ -#>- html-recursive info-recursive install-data-recursive \ -#>- install-dvi-recursive install-exec-recursive \ -#>- install-html-recursive install-info-recursive \ -#>- install-pdf-recursive install-ps-recursive install-recursive \ -#>- installcheck-recursive installdirs-recursive pdf-recursive \ -#>- ps-recursive uninstall-recursive -#>+ 7 -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 1 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -ARTSCCONFIG = @ARTSCCONFIG@ -AUTOCONF = @AUTOCONF@ -AUTODIRS = @AUTODIRS@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CONF_FILES = @CONF_FILES@ -CYGPATH_W = @CYGPATH_W@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOPIDLNG = @DCOPIDLNG@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DEFS = @DEFS@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -GMSGFMT = @GMSGFMT@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ -KCONFIG_COMPILER = @KCONFIG_COMPILER@ -KDECONFIG = @KDECONFIG@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_RPATH = @KDE_RPATH@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XMLLINT = @XMLLINT@ -X_RPATH = @X_RPATH@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -am__leading_dot = @am__leading_dot@ -am__tar = @am__tar@ -am__untar = @am__untar@ -#>- bindir = @bindir@ -#>+ 2 -DEPDIR = .deps -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_kcfgdir = @kde_kcfgdir@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_styledir = @kde_styledir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -kde_widgetdir = @kde_widgetdir@ -tdeinitdir = @tdeinitdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -xdg_appsdir = @xdg_appsdir@ -xdg_directorydir = @xdg_directorydir@ -xdg_menudir = @xdg_menudir@ -KDE_LANG = en_GB -#>- SUBDIRS = $(AUTODIRS) -#>+ 1 -SUBDIRS =. -KDE_DOCS = tdm -KDE_MANS = AUTO -#>- all: all-recursive -#>+ 1 -all: docs-am all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -#>- @for dep in $?; do \ -#>- case '$(am__configure_deps)' in \ -#>- *$$dep*) \ -#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -#>- && exit 0; \ -#>- exit 1;; \ -#>- esac; \ -#>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile -#>+ 12 - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -#>- distdir: $(DISTFILES) -#>+ 1 -distdir: distdir-nls $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -#>- uninstall: uninstall-recursive -#>+ 1 -uninstall: uninstall-docs uninstall-nls uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic mostlyclean-am -#>+ 1 -clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -#>- install-data-am: -#>+ 1 -install-data-am: install-docs install-nls - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ - tags-recursive uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - -#>+ 2 -KDE_DIST=tdmrc-ref.docbook Makefile.in index.docbook Makefile.am index.cache.bz2 - -#>+ 24 -index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) tdmrc-ref.docbook index.docbook - @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi - -docs-am: index.cache.bz2 - -install-docs: docs-am install-nls - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm - @if test -f index.cache.bz2; then \ - echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ - $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ - elif test -f $(srcdir)/index.cache.bz2; then \ - echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ - $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ - fi - -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common - $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common - -uninstall-docs: - -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm - -clean-docs: - -rm -f index.cache.bz2 - - -#>+ 13 -install-nls: - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm - @for base in tdmrc-ref.docbook index.docbook ; do \ - echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ - $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ - done - -uninstall-nls: - for base in tdmrc-ref.docbook index.docbook ; do \ - rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ - done - - -#>+ 5 -distdir-nls: - for file in tdmrc-ref.docbook index.docbook ; do \ - cp $(srcdir)/$$file $(distdir); \ - done - -#>+ 15 -force-reedit: - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in - - -#>+ 21 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class a.out - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - rm -f a.out; \ - fi ; \ - done - - -#>+ 3 -final: - $(MAKE) all-am - -#>+ 3 -final-install: - $(MAKE) install-am - -#>+ 3 -no-final: - $(MAKE) all-am - -#>+ 3 -no-final-install: - $(MAKE) install-am - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/index.cache.bz2 b/tde-i18n-en_GB/docs/tdebase/kdm/index.cache.bz2 deleted file mode 100644 index ba71a9916b9..00000000000 Binary files a/tde-i18n-en_GB/docs/tdebase/kdm/index.cache.bz2 and /dev/null differ diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook deleted file mode 100644 index c0c5a7e2a2a..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook +++ /dev/null @@ -1,1812 +0,0 @@ - - - - tdmrc"> - XDMCP"> - xdm"> - - - -]> - - - -The &tdm; Handbook - - -&Oswald.Buddenhagen; &Oswald.Buddenhagen.mail; - -JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English - - - - -2000 -&Neal.Crook; - - - -2002 -&Oswald.Buddenhagen; - - - -2003 -&Lauri.Watts; - - -2003-03-01 -0.05.02 - - -This document describes &tdm; the &kde; Display Manager. &tdm; is also known as the Login Manager. - - - -KDE -tdm -xdm -display manager -login manager - - - - - -Introduction - -&tdm; provides a graphical interface that allows you to log in to a system. It prompts for login (username) and password, authenticates the user and starts a session. &tdm; is superior to &xdm;, the X Display Manager, in a number of ways. - - - - - - - -Quick Start Guide - -This is a quick start guide for users who fit the following pattern: - - - -X is configured and works with the command startx from the commandline. - - -Each user will generally only use a single window manager or desktop environment, and does not change this choice very often, or is comfortable editing a single text file in order to change their choice. - - - -This scenario will be sufficient for many environments where a single user or several users normally boot the computer and log into their preferred environment. - - -Setting up a Default Session - -Create or open the file ~/.xinitrc -If you already have a working ~/.xinitrc, go to the next step - - -If one does not already exist, add a line to the ~/.xinitrc to start your preferred window manager or desktop environment. -For &kde; you should enter: -starttde -For other window managers or desktop environments, you should look in their documentation for the correct command. - -Make a link as follows: -ln ~/.xinitrc ~/.xsession - - - -At this point, typing startx on the commandline should start X, with a &kde; session. The next task is to try &tdm;. - -As root, type tdm at the prompt. - -You should see a login window, which is described more fully in. - -Typing your normal username and password in the fields provided, and leaving selected as the session type should now open a &kde; session for your user. - -If you have other users to configure, you should repeat the procedure above for each of them. - - -This is a quick guide to getting up and running only. You probably will want to customise &tdm; further, for example, to hide the names of the system accounts, to allow further sessions, and much more. Please read through the rest of this manual to find out how to do these things. - - - - - -The Login Window - -The user interface to &tdm; consists of two dialogue boxes. The main dialogue box has these controls: - - - -A Username: field for you to enter your username. - - - -A Password: field for you to enter your password. - - - -(Optionally) a graphical image of each user (for example, a digitised photograph). Clicking on an image is equivalent to typing the associated username into the Username: field. (This feature is an imitation of the login box on IRIX). - - -A Menu drop-down box that allows &tdm; to be used to start sessions with various different window managers or desktop environments installed on the system. - - - -(Optionally) a region to the right of the Username:, Password: and Session Type: fields which can be used to display either a static image or an analogue clock. - - - -A Login button that validates the username/password combination and attempts to start a session of the selected type. - - - -A Clear button that clears the text from the Login and Pass fields. - - - -(Optionally) A Shutdown button that displays the Shutdown dialogue box. - - -A Menu button that opens an action menu with the following items: - - - -(On local displays) a Restart X Server item that terminates the currently running &X-Server;, starts a new one and displays the login dialogue again. You can use this if the display content seems to be broken somehow. - - - -(On remote displays) A Close Connection item that closes the connection to the XDMCP server you are currently connected to. If you got to this server through a host chooser, this will bring you back to the chooser, otherwise it will only reset the &X-Server; and bring up the login dialogue again. - - - -(Optionally on local displays) A Console Mode item that terminates the currently running &X-Server; and leaves you alone with a console login. &tdm; will resume the graphical login if nobody is logged in at the console for some time. To make this work, you need to use the local@<console> syntax in the Xservers file (see comments in that file). - - - - - -(Optionally) A Shutdown... button that displays the shutdown dialogue box. - - - -The Shutdown dialogue box presents a set of radio buttons that allow one of these options to be selected: - - - -Shutdown -Shut the system down in a controlled manner, ready for power-down. - - -Restart -Shut the system down and reboot. For systems that use Lilo, an optional drop-down box allows you to select a particular operating-system kernel to be used for the reboot. - - - -Restart X Server - -Stop and then restart the X-server. Typically, you might need to use this option if you have changed your X11 configuration in some way. - - - -Console Mode - -Stop the &X-Server; and return the system to console mode. This is achieved by bringing the system down to run-level 3. Typically, the system manager might need to use this option before upgrading or re-configuring X11 software. - - - - -Pressing the OK button initiates the selected action; pressing the Cancel button returns to the main &tdm; dialogue box. - - - - - -Configuring &tdm; - -This chapter assumes that &tdm; is already up and running on your system, and that you simply want to change its behaviour in some way. - -When &tdm; starts up, it reads its configuration from the folder $TDEDIR/share/config/tdm/ (this may be /etc/kde3/tdm/ or something else on your system). - -The main configuration file is &tdmrc;; all other files are referenced from there and could be stored under any name anywhere on the system - but usually that would not make much sense for obvious reasons (one particular exception is referencing configuration files of an already installed &xdm; - however when a new &tdm; is installed, it will import settings from those files if it finds an already installed &xdm;). - -Since &tdm; must run before any user is logged in, it is not associated with any particular user. Therefore, it is not possible to have user-specific configuration files; all users share the common &tdmrc;. It follows from this that the configuration of &tdm; can only be altered by those users that have write access to $TDEDIR/share/config/tdm/tdmrc (normally restricted to system administrators logged in as root). - -You can view the &tdmrc; file currently in use on your system, and you can configure &tdm; by editing this file. Alternatively, you can use the graphical configuration tool provided by the &kcontrolcenter; (under System AdministrationLogin Manager), which is described in the &kcontrol; help files. - -The remainder of this chapter describes configuration of &tdm; via the &kcontrol; module, and the next chapter describes the options available in &tdmrc; itself. If you only need to configure for local users, the &kcontrol; module should be sufficient for your needs. If you need to configure remote logins, or have multiple &tdm; sessions running, you will need to read on. - - - - -&Thomas.Tanghus; &Thomas.Tanghus.mail; -&Steffen.Hansen; &Steffen.Hansen.mail; -&Mike.McBride; &Mike.McBride.mail; -JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English - - - -The Login Manager &kcontrol; Module - -Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. - -All settings will be written to the configuration file &tdmrc;, which in it's original state has many comments to help you configure &tdm;. Using this &kcontrol; module will strip these comments from the file. All available options in &tdmrc; are covered in . - -The options listed in this chapter are cross referenced with their equivalents in &tdmrc;. All options available in the &kcontrol; module are also available directly in &tdmrc; but the reverse is not true. - -In order to organise all of these options, this module is divided into several sections: Appearance, Font, Background, Shutdown, Users and Convenience. - -You can switch between the sections using the tabs at the top of the window. - -If you are not currently logged in as a superuser, you will need to click the Administrator Mode Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. - - -Appearance - -From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. - -The Greeting: is the title of the login screen. Setting this is especially useful if you have many servers users may log in to. You may use various placeholders, which are described along with the corresponding key in &tdmrc;. - -You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled Logo area:. This corresponds to in &tdmrc; - -If you chose Show logo you can now choose a logo: - - - -Drop an image file on the image button. - - -Click on the image button and select a new image from the image chooser dialogue. - - - -If you do not specify a logo the default $TDEDIR/share/apps/tdm/pics/kdelogo.xpm will be displayed. - -Normally the login box is centred on the screen. Use the Position: options if you want it to appear elsewhere on the screen. You can specify the relative position (percentage of the screen size) for the centre of the login window, relative to the top left of the display, in the fields labelled X: and Y: respectively. These correspond to the key in &tdmrc;. - -While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style: and Colour Scheme: options. These correspond to the keys and in &tdmrc; respectively. - -Below that, you have a dropdown box to choose the language for your login box, corresponding to setting in &tdmrc;. - - - - -Font - -From this section of the module you can change the fonts used in the login window. Only fonts available to all users are available here, not fonts you have installed on a per user basis. - -You can select three different font styles from the drop down box (General:, Failures:, Greeting). When you click on the Choose... button a dialogue appears from which you can select the new characteristics for the font style. - - - -The General: font is used in all other places in the login window. - - -The Failures: font is used when a login fails. - - -The Greeting: font is the font used for the title (Greeting String). - - - -You can also check the box labelled Use anti-aliasing for fonts if you want smoothed fonts in the login dialogue. - -An example of each font can be seen in the Example Box. - - - - -Background - -Here you can change the desktop background which will be displayed before a user logs in. You can have a single colour or an image as a background. If you have an image as the background and select centre, the selected background colour will be used around the image if it is not large enough to cover the entire desktop. - -The background colours and effects are controlled by the options on the tab labelled Background and you select a background image and its placement from the options on the tab labelled Wallpaper. - -To change the default background colour(s) simply click either of the colour buttons and select a new colour. - -The dropdown box above the colour buttons provides you with several different blend effects. Choose one from the list, and it will be previewed on the small monitor at the top of the window. Your choices are: - - - -Flat -By choosing this mode, you select one colour (using the colour button labelled Colour 1), and the entire background is covered with this one colour. - - -Pattern -By choosing this mode, you select two colours (using both colour buttons). You then select a pattern by clicking Setup. This opens a new dialogue window, which gives you the opportunity to select a pattern. Simply click once on the pattern of your choice, then click on OK, and &kde; will render the pattern you selected using the two colours you selected. For more on patterns, see the section Background: Adding, Removing and Modifying Patterns. - - -Background Program -By selecting this option, you can have &kde; use an external program to determine the background. This can be any program of your choosing. For more information on this option, see the section entitled Background: Using an external program. - - -Horizontal Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the left edge of the screen, and slowly transform into the colour selected by Colour 2 by the time it gets to the right edge of the screen. - - -Vertical Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the top edge of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the bottom of the screen. - - -Pyramid Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. - - -Pipecross Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. The shape of this gradient is different then the pyramid gradient. - - -Elliptic Gradient -By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 2 in the centre of the screen, and slowly transform into the colour selected by Colour 1 as it moves to the edges, in an elliptical pattern. - - - -The setup button is only needed for if you select Background program or Patterns. In these instances, another window will appear to configure the specifics. -Wallpaper -To select a new background image first, click on the Wallpapers tab, then you can either select an image from the drop-down list labelled Wallpaper or select Browse... and select an image file from a file selector. - -The image can be displayed in six different ways: - - -No wallpaper -No image is displayed. Just the background colours. - - -Centred -The image will be centred on the screen. The background colours will be present anywhere the image does not cover. - - -Tiled -The image will be duplicated until it fills the entire desktop. The first image will be placed in the upper left corner of the screen, and duplicated downward and to the right. - - -Centre Tiled -The image will be duplicated until it fills the entire desktop. The first image will be placed in the centre of the screen, and duplicated upwards, downwards to the right, and to the left. - - -Centred Maxpect -The image will be placed in the centre of the screen. It will be scaled to fit the desktop, but it will not change the aspect ratio of the original image. This will provide you with an image that is not distorted. - - -Scaled -The image will be scaled to fit the desktop. It will be stretched to fit all four corners. - - - - - - -<guilabel ->Shutdown</guilabel -> - -Allow Shutdown -Use these dropdown box to choose who is allowed to shut down: - - -Nobody: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command. - - -Everybody: Everyone can shutdown the computer using &tdm;. - -Only Root: &tdm; requires that the root password be entered before shutting down the computer. - - -You can independently configure who is allowed to issue a shutdown command for the Local: and Remote: users. - -Commands Use these text fields to define the exact shutdown command. The Halt: command defaults to /sbin/halt. The restart command defaults to /sbin/reboot. - -When Show boot options is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your lilo command and to lilo's map file. - - - -Session types - -Define which session types should be accessible from the login window. - -For more information on this subject, look at /etc/X11/xdm/Xsession to find your xdm setup files. Also review the xdm man pages, especially under the SESSION PROGRAM section. - -To add a session, type its name in the blank entitled New types, and click Add new. - -To remove a session, select the session from the list and click Remove. - - - - -Users - -From here you can change the way users are represented in the login window. - -You may disable the user list in &tdm; entirely in the Show Users section. You can choose from: - - -None - -Do not show any users. This is the most secure setting, since an attacker would then have to guess a valid login name as well as a password. It's also the preferred option if you have more than a handful of users to list, or the list itself would become unwieldy. - - - -Selected only - -Only show users you have specifically enabled. - - - -Not hidden - -Allows you to select a list of users that should not be shown, and all other users will be listed. - - - - -Independently of the users you specify by name, you can use the System UIDs to specify a range of valid UIDs that are shown in the list. By default user id's under 1000, which are often system or daemon users, and user id's over 65000, are not shown. - -You can also enable the Sort users checkbox, to have the user list sorted alphabetically. If this is disabled, users will appear in the order they are listed in the password file. - -If you choose to show users, then the login window will show images (which you select), of a list of users. When someone is ready to login, they may select their user name/image, enter their password, and they are granted access. - -If you permit a user image, then you can configure the source for those images. - -The available options for the User Image Source are: - - -You can configure the admin picture here, for each user on the system. Depending on the order selected above, users may be able to override your selection. - -If you choose not to show users, then the login window will be more traditional. Users will need to type their username and password to gain entrance. This is the preferred way if you have many users on this terminal. - - -To show (and sort) or not to show users - -Along the right edge of the window are two check boxes: - -If Show users is selected you have chosen to show images of users, instead of making them type their login name. - -If Sort users is selected, then the list of users will be sorted alphabetically in the login window. If unchecked, users will be listed in the same order as they are on this page. If Show users is not checked, this has no effect. - - - - -How to determine which users to show and which users to hide - -Below the user image box, and above the Show users check box, is a set of two radio buttions: - - -Show only selected users: If this option is selected, only the users contained in the list labelled Selected Users, will be displayed in the login window. If Show users is not checked, this has no effect. -Show all users but no-show users: If this option is selected, all users will be listed, except those users contained in the list entitled No show users. If Show users is not checked, this has no effect. - - - - - -Select users - -This page contains three listboxes. The large listbox on the left shows all the users on the system which might be a genuine user. - -The top rightmost listbox shows the selected users and the bottom rightmost listbox shows the users we do not want displayed in the login window. - -To move a user from one listbox to another you click on the username in the listbox and click >> to move the user from the leftmost box the the rightmost box or << to move the user from the rightmost box to the leftmost box. - - - - -Images - -This section of the manual only applies if Show users is selected. If it is not, this image box has no effect. - -Every user on the system can be represented by an image. The image for each user is kept in a file called $TDEDIR/share/apps/tdm/pics/users/$USER.xpm. If there is no such file for a particular user, the file $TDEDIR/share/apps/tdm/pics/users/default.xpm will be used instead. - -To assign a new image to a user just select the user in one of the listboxes and either drop an imagefile on the image button to the right or click on the image button and select a new image from the image selector. - -If no user is currently selected you will be asked if you want to change the default image. - -The replacement is performed by a &konqueror; process so if the imagefile already exists you will be prompted by &konqueror; if you want to replace it. If you confirm the image will be replaced - you will NOT have to press the Apply button. - - - - - -Convenience - -In the convenience tab you can configure some options that make life easier for lazy people, like automatic login or disabling passwords. - -Please think more than twice before using these options. Every option in the Convenience tab is well-suited to seriously compromise your system security. Practically, these options are only to be used in a completely non-critical environment, ⪚ a private computer at home. - - -Automatic Login - -Automatic login will give anyone access to a certain account on your system without doing any authentication. You can enable it using the option Enable auto-login. - -You can choose the account to be used for automatic login from the list labelled User:. - - - - -<guilabel ->Password-Less Login</guilabel -> - -Using this feature, you can allow certain users to login without having to provide their password. Enable this feature using the Enable password-less logins option. - -Below this option you'll see a list of users on the system. Enable password-less login for specific users by checking the checkbox next to the login names. By default, this feature is disabled for all users. - -Again, this option should only be used in a safe environment. If you enable it on a rather public system you should take care that only users with heavy access restrictions are granted password-less login, ⪚ guest. - -The Automatically login after X server crash option allows you to skip the authentication procedure when your X server accidentally crashed. - -You can also choose which user is preselected when &tdm; starts. The default is None, but you can choose Previous to have &tdm; default to the last successfully logged in user, or you can Specify a particular user to always be selected from the list. You can also have &tdm; set the focus to the password field, so that when you reach the &tdm; login screen, you can type the password immediately. - - - - - - - - - -&tdmrc-ref; - - - -Configuring your system to use &tdm; - -This chapter assumes that your system is already configured to run the X Window System, and that you only need to reconfigure it to allow graphical login. - - -Setting up &tdm; - -The fundamental thing that controls whether your computer boots to a terminal prompt (console mode) or a graphical login prompt is the default runlevel. The runlevel is set by the program /sbin/init under the control of the configuration file /etc/inittab. The default runlevels used by different &UNIX; systems (and different &Linux; distributions) vary, but if you look at /etc/inittab the start of it should be something like this: - -# Default runlevel. The runlevels used by RHS are: -# 0 - halt (Do NOT set initdefault to this) -# 1 - Single user mode -# 2 - Multiuser, without NFS -# 3 - Full multiuser mode -# 4 - unused -# 5 - X11 -# 6 - reboot (Do NOT set initdefault to this) - -id:3:initdefault: - - -All but the last line of this extract are comments. The comments show that runlevel 5 is used for X11 and that runlevel 3 is used for multi-user mode without X11 (console mode). The final line specifies that the default runlevel of the system is 3 (console mode). If your system currently uses graphical login (for example, using &xdm;) its default runlevel will match the runlevel specified for X11. - -The runlevel with graphical login (&xdm;) for some common &Linux; distributions are: - - -5 for &RedHat; 3.x and later, and for &Mandrake; -4 for Slackware -3 for &SuSE;. 4.x and 5.x - - -The first step in configuring your system is to ensure that you can start &tdm; from the command line. Once this is working, you can change your system configuration so that &tdm; starts automatically each time you reboot your system. - -To test &tdm;, you must first bring your system to a runlevel that does not run &xdm;. To do so, issue a command like this: - -/sbin/init - -Instead of the number you should specify the appropriate runlevel for console mode on your system. - -If your system uses Pluggable Authentication Modules (PAM), which is normal with recent &Linux; and Solaris systems, you should check that your PAM configuration permits login through the service named kde. If you previously used &xdm; successfully, you should not need to make any changes to your PAM configuration in order to use &tdm;. /etc/pam.conf or /etc/pam.d/kde. Information on configuring PAM is beyond the scope of this handbook, but PAM comes with comprehensive documentation (try looking in /usr/share/doc/*pam*/html/). - -Now it's time for you to test &tdm; by issuing the following command: - -tdm - - -If you get a &tdm; login dialogue and you are able to log in, things are going well. The main thing that can go wrong here is that the run-time linker might not find the shared &Qt; or &kde; libraries. If you have a binary distribution of the &kde; libraries, make sure &tdm; is installed where the libraries believe &kde; is installed and try setting some environment variables to point to your &kde; and &Qt; libraries. - -For example: - -export - -export - -export - -export - - - -If you are still unsuccessful, try starting &xdm; instead, to make sure that you are not suffering from a more serious X configuration problem. - -When you are able to start &tdm; successfully, you can start to replace &xdm; by &tdm;. Again, this is distribution-dependent. - - - -For &RedHat;, edit /etc/inittab, look for the string xdm and replace it with &tdm; (including all paths). - - -For &Mandrake;, the X11 runlevel in /etc/inittab invokes the shell script /etc/X11/prefdm, which is set up to select from amongst several display managers, including &tdm;. Make sure that all the paths are correct for your installation. - - -For &SuSE;, edit /sbin/init.d/xdm to add a first line: - -. /etc/rc.config -DISPLAYMANAGER=tdm -export DISPLAYMANAGER - -For FreeBSD, edit /etc/ttys and find the line like this: ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure and edit it to this: ttyv8 "/usr/local/bin/tdm -nodaemon" xterm on secure - - - -Most other distributions are a variation of one of these. - - -At this stage, you can test &tdm; again by bringing your system to the runlevel that should now run &tdm;. To do so, issue a command like this: - -/sbin/init - - -Instead of the number you should specify the appropriate runlevel for running X11 on your system. - -The final step is to edit the initdefault entry in /etc/inittab to specify the appropriate runlevel for X11. - -Before you make this change, ensure that you have a way to reboot your system if a problem occurs. This might be a rescue floppy-disk provided by your operating system distribution or a specially-designed rescue floppy-disk, such as tomsrtbt. Ignore this advice at your peril. - -When you reboot your system, you should end up with the graphical &tdm; login dialogue. - -If this step is unsuccessful the most likely problem is that the environment used at boot time differs from the environment that you used for testing at the command line. If you are trying to get two versions of KDE to co-exist, be particularly careful that the settings you use for your PATH and LD_LIBRARY_PATH environment variables are consistent, and that the startup scripts are not over-riding them in some way. - - - - - - -Supporting multiple window managers - -The main dialogue box for &tdm; includes a Session Type: drop-down box, which allows you to select a window manager to use for your session. This chapter describes the changes that you must make to your configuration files in order to support this feature. - -The options that appear in the Session Type: drop-down box are configured by entries in the TDM section of &tdmrc;. - -When you log in using &tdm;, the shell script Xsession is executed. The session type that you select is passed as a command-line argument. (Xsession can be found in /etc/X11/xdm/ for Redhat and Mandrake, and in /usr/X11R6/lib/X11/xdm/ for S.u.S.E.). Whilst debugging, you might find it helpful to add this line to Xsession: - -echo "$0 || $1 || $2" -> $HOME/.Xsession_args - -How you proceed now depends upon how your system usually starts up window managers. Here are two different approaches, with examples of the changes that you must make: - - - -The window manager is started by commands within Xsession. In this case, you can add a case statement to start the appropriate window manager. Linux Mandrake uses this approach; here is an extract from Xsession: - -# now, we see if xdm/gdm/tdm has asked for a specific environment -case $# in -1) - case $1 in - kde) - source /opt/kde2/bin/kde1 - exec starttde - ;; - kde2) - source /opt/kde2/bin/kde2 - exec starttde - ;; - failsafe) - exec xterm -geometry 80x24-0-0 - ;; - default) - ;; - *) - exec /bin/sh -c "$(/usr/sbin/chksession -x=$1)" - ;; - esac -esac - - - -The window manager is started by another script that is invoked by Xsession. In this case you must ensure that the parameter passed to Xsession is passed on to that other script. For example, if the window manager is started like this: - -exec - -you would need to change it to: - -exec - -Having made this change, you must trace your way through the startup to find the place where the window manager is started. One approach uses xinitrc to start the window manager; this allows a system-wide file /etc/X11/xinit/xinitrc or a user-specific file $HOME/.xinitrc to be used. If you edit $HOME/.xinitrc, you may want to save a copy in /etc/skel, so that it will be automatically generated in every user account you create from now on. Here is an example xinitrc for a system using this approach: - -#!/bin/bash -# -# .xsession/.xinitrc -# -# choose a window manager -# - -defaultwm=kde -#set the window manager to $1 if it was supplied -windowmgr=${1:-$defaultwm} - -#start the respective window managers -case ${windowmgr} in - kde|kwm|kdestart) - WINDOWMANAGER=starttde - ;; - fvwm|fvwm2) - WINDOWMANAGER=fvwm2 - ;; - - fvwm95) - WINDOWMANAGER=fvwm95 - ;; - - *) WINDOWMANAGER=windowmgr # default for unknown wm's - -esac - -# -# load resources -# - -if [ -f /usr/X11R6/lib/X11/Xmodmap ]; then - xmodmap /usr/X11R6/lib/X11/Xmodmap -fi - -if [ -f ~/.Xmodmap ]; then - xmodmap ~/.Xmodmap -fi - -if [ -f ~/.Xdefaults ]; then - xrdb -merge ~/.Xdefaults -fi - -if [ -f ~/.Xresources ]; then - xrdb -merge ~/.Xresources -fi -# -# finally start the window manager -# -exec $WINDOWMANAGER - - - - - - - - - -Using &tdm; for Remote Logins (&XDMCP;) - -&XDMCP; is the Open Group standard, the X Display Manager Control Protocol. This is used to set up connections between remote systems over the network. - -&XDMCP; is useful in multiuser situations where there are users with workstations and a more powerful server that can provide the resources to run multiple X sessions. For example, &XDMCP; is a good way to reuse old computers - a Pentium or even 486 computer with 16 Mb RAM is sufficient to run X itself, and using XDMCP such a computer can run a full modern &kde; session from a server. For the server part, once a single &kde; (or other environment) session is running, running another one requires very few extra resources. - -However, allowing another method of login to your machine obviously has security implications. You should run this service only if you need to allow remote X Servers to start login sessions on your system. Users with a single &UNIX; computer should not need to run this. - - - - - - -Other sources of information - -Since &tdm; is descended from &xdm;, the xdm man page may provide useful background information. For X-related problems try the man pages X and startx. If you have questions about &tdm; that are not answered by this handbook, take advantage of the fact the &tdm; is provided under the terms of the GNU General Public Licence: look at the source code. - - - - -Credits and Licence - -&tdm; is derived from, and includes code from, &xdm; (C) Keith Packard, MIT X Consortium. - -&tdm; 0.1 was written by Matthias Ettrich. Later versions till &kde; 2.0.x were written by Steffen Hansen. Some new features for &kde; 2.1.x and a major rewrite for &kde; 2.2.x made by Oswald Buddenhagen. - -Other parts of the &tdm; code are copyright by the authors, and licensed under the terms of the GNU GPL. Anyone is allowed to change &tdm; and redistribute the result as long as the names of the authors are mentioned. - -&tdm; requires the Qt library, which is copyright Troll Tech AS. - -Documentation contributors: - -Documentation written by Steffen Hansen stefh@dit.ou.dk - -Documentation extended by Gregor Zumsteinzumstein@ssd.ethz.ch. Last update August 9, 1998 - -Documentation revised for KDE 2 by Neal Crooknac@forth.org. Last update August 6, 2000 - -Documentation extended and revised for KDE 2.2 by Oswald Buddenhagenossi@kde.org. Last update August, 2001 - - - -Documentation copyright Steffen Hansen, Gregor Zumstein, Neal Crook and Oswald Buddenhagen. This document also includes large parts of the &xdm; man page, which is (C) Keith Packard. - -Conversion to British English: John Knight anarchist_tomato@herzeleid.net -&underFDL; &underGPL; - - -Building and Installing tdm - -&tdm; is part of the KDE project. The various component parts of the KDE project are broken into sections, called packages. &tdm; is part of the package called tdebase. You can get KDE source code from various Linux and BSD distribution CDs, or by download from www.kde.org or its mirrors. If you have an out-of-date source code tree, you can use one of the KDE cvsup servers to bring it up-to-date whilst using minimal network bandwidth. - -Before building tdebase, you must have built and installed (in this order) version 2 of the qt library and the KDE packages tdesupport (optionally) and tdelibs. - -In order to build any of the above, you must already have the X Window System installed, together with a C++ compiler. If are you building from CVS you will also need the GNU configuration tools automake and autoconf. - -If the last few paragraphs seemed like a foreign language, then either you have strayed into an Inappropriate Area of this handbook, or you are about to undergo a Great Learning Experience. - -If you managed to satisfy all of the prerequisites, you are unlikely to have any problems with building and installing tdebase. &tdm; is installed in your $TDEDIR/bin folder. - -make will not overwrite your previous &tdm; config files including &tdmrc;. - - - - -Glossary - - -greeter -The greeter is the login dialogue, &ie; the part of &tdm; which the user sees. - - - - -entropy -... - - - - - - - diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook b/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook deleted file mode 100644 index a778a4b0d2f..00000000000 --- a/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook +++ /dev/null @@ -1,3221 +0,0 @@ - - - -The Files &tdm; Uses for Configuration - -This chapter documents the files that control &tdm;'s behaviour. Some of this can be also controlled from the &kcontrol; module, but not all. - - -&tdmrc; - The &tdm; master configuration file - -The basic format of the file is INI-like. Options are key/value pairs, placed in sections. Everything in the file is case sensitive. Syntactic errors and unrecognised key/section identifiers cause &tdm; to issue non-fatal error messages. - -Lines beginning with # are comments; empty lines are ignored as well. - -Sections are denoted by [Name of Section]. - -You can configure every X-display individually. -Every display has a display name, which consists of a host name (which is empty for local displays specified in the Xservers file), a colon and a display number. Additionally, a display belongs to a display class (which can be ignored in most cases). - -Sections with display-specific settings have the formal syntax [X- host [ : number [ _ class ] ] - sub-section ] -All sections with the same sub-section make up a section class. - -You can use the * wildcard for host, number and class. You may omit trailing components; they are assumed to be * then. The host part may be a domain specification like .inf.tu-dresden.de. - -From which section a setting is actually taken is determined by these rules: - - - -An exact match takes precedence over a partial match (for the host part), which in turn takes precedence over a wildcard. - - - -Precedence decreases from left to right for equally exact matches. - - - - -Example: display name myhost:0, class dpy - - -[X-myhost:0_dpy] precedes - - -[X-myhost:0_*] (same as [X-myhost:0]) precedes - - -[X-myhost:*_dpy] precedes - - -[X-myhost:*_*] (same as [X-myhost]) precedes - - -[X-*:0_dpy] precedes - - -[X-*:0_*] (same as [X-*:0]) precedes - - -[X-*:*_*] (same as [X-*]). - - -These sections do not match this display: -[X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] - - - - - - - -Common sections are [X-*] (all displays), [X-:*] (all local displays) and [X-:0] (the first local display). - -The format for all keys is  = value. Keys are only valid in the section class they are defined for. Some keys do not apply to particular displays, in which case they are ignored. - -If a setting is not found in any matching section, the default is used. - -A pristine &tdmrc; is very thoroughly commented. All comments will be lost if you change this file with the kcontrol frontend. - - - -The [General] section of &tdmrc; - -This section contains global options that do not fit into any specific section. - - - - - - -This option exists solely for the purpose of clean automatic upgrades. Do not change it, you may interfere with future upgrades and this could result in &tdm; failing to run. - - - - - - -If the value starts with a slash (/), it specifies a file to read &X-Server; definitions from; otherwise, it is an &X-Server; definition by itself. See for the details. The default is an &X-Server; definition that is usually reasonable for the system on which &tdm; was built. - - - - - - -List of Virtual Terminals to allocate to &X-Server;s. For negative numbers the absolute value is used, and the VT will be allocated only if the kernel says it is free. If &tdm; exhausts this list, it will allocate free VTs greater than the absolute value of the last entry in this list. -Empty by default. - - - - - - -The filename specified will be created to contain an ASCII representation of the process ID of the main &tdm; process; the PID will not be stored if the filename is empty. -Empty by default. - - - - - - -This option controls whether &tdm; uses file locking to keep multiple display managers from running onto each other. -The default is true. - - - - - - -This names a directory under which &tdm; stores &X-Server; authorisation files while initialising the session. &tdm; expects the system to clean up this directory from stale files on reboot. The authorisation file to be used for a particular display can be specified with the option in [X-*-Core]. -The default is /var/run/xauth. - - - - - - -This boolean controls whether &tdm; automatically re-reads its configuration files if it finds them to have changed. -The default is true. - - - - - - -Additional environment variables &tdm; should pass on to all programs it runs. LD_LIBRARY_PATH and XCURSOR_THEME are good candidates; otherwise, it should not be necessary very often. -Empty by default. - - - - - - -If the system has no native entropy source like /dev/urandom (see ) and no entropy daemon like EGD (see and ) is running, &tdm; will fall back to its own pseudo-random number generator that will, among other things, successively checksum parts of this file (which, obviously, should change frequently). This option does not exist on Linux and various BSDs. -The default is /dev/mem. - - - - - - -If the system has no native entropy source like /dev/urandom (see ), read random data from a Pseudo-Random Number Generator Daemon, like EGD (http://egd.sourceforge.net) via this UNIX domain socket. This option does not exist on Linux and various BSDs. -Empty by default. - - - - - - -Same as , only use a TCP socket on localhost. - - - - - - -The path to a character device which TDM should read random data from. Empty means to use the system's preferred entropy device if there is one. This option does not exist on OpenBSD, as it uses the arc4_random function instead. -Empty by default. - - - - - - -The directory in which the command FiFos should be created; make it empty to disable them. -The default is /var/run/xdmctl. - - - - - - -The group to which the global command FiFo should belong; can be either a name or a numerical ID. - - - - - - -The directory in which &tdm; should store persistent working data; such data is, for example, the previous user that logged in on a particular display. -The default is /var/lib/tdm. - - - - - - -The directory in which &tdm; should store users' .dmrc files. This is only needed if the home directories are not readable before actually logging in (like with AFS). -Empty by default. - - - - - - - - -The [Xdmcp] section of &tdmrc; - -This section contains options that control &tdm;'s handling of &XDMCP; requests. - - - - - - -Whether &tdm; should listen to incoming &XDMCP; requests. -The default is true. - - - - - - -This indicates the UDP port number which &tdm; uses to listen for incoming &XDMCP; requests. Unless you need to debug the system, leave this with its default value. -The default is 177. - - - - - - -XDM-AUTHENTICATION-1 style &XDMCP; authentication requires a private key to be shared between &tdm; and the terminal. This option specifies the file containing those values. Each entry in the file consists of a display name and the shared key. -Empty by default. - - - - - - -To prevent unauthorised &XDMCP; service and to allow forwarding of &XDMCP; IndirectQuery requests, this file contains a database of hostnames which are either allowed direct access to this machine, or have a list of hosts to which queries should be forwarded to. The format of this file is described in . -The default is ${kde_confdir}/tdm/Xaccess. - - - - - - -Number of seconds to wait for the display to respond after the user has selected a host from the chooser. If the display sends an &XDMCP; IndirectQuery within this time, the request is forwarded to the chosen host; otherwise, it is assumed to be from a new session and the chooser is offered again. -The default is 15. - - - - - - -When computing the display name for &XDMCP; clients, the name resolver will typically create a fully qualified host name for the terminal. As this is sometimes confusing, &tdm; will remove the domain name portion of the host name if it is the same as the domain name of the local host when this option is enabled. -The default is true. - - - - - - -Use the numeric IP address of the incoming connection on multihomed hosts instead of the host name. This is to avoid trying to connect on the wrong interface which might be down at this time. -The default is false. - - - - - - -This specifies a program which is run (as root) when an &XDMCP; DirectQuery or BroadcastQuery is received and this host is configured to offer &XDMCP; display management. The output of this program may be displayed in a chooser window. If no program is specified, the string Willing to manage is sent. -Empty by default. - - - - - - - - -The [Shutdown] section of &tdmrc; - -This section contains global options concerning system shutdown. - - - - - - -The command to run to halt/poweroff the system. The default is something reasonable for the system on which &tdm; was built, like /sbin/shutdown  now. - - - - - - -The command to run to reboot the system. The default is something reasonable for the system &tdm; on which was built, like /sbin/shutdown  now. - - - - - - -Whether it is allowed to shut down the system via the global command FiFo. -The default is false. - - - - - - -Whether it is allowed to abort active sessions when shutting down the system via the global command FiFo. This will have no effect unless is enabled. -The default is true. - - - - - - -Instructs &tdm; to offer LiLo boot options in the shutdown dialogue. Only available on Linux i386 & x86-64. -The default is false. - - - - - - -The location of the LiLo binary. Only available on Linux i386 & x86-64. -The default is /sbin/lilo. - - - - - - -The location of the map file LiLo should use. Only available on Linux i386 & x86-64. -The default is /boot/map. - - - - - - - - -The [X-*-Core] section class of &tdmrc; - -This section class contains options concerning the configuration of the &tdm; backend (core). - - - - - - -See . -The default is 15. - - - - - - -See . -The default is 120. - - - - - - -These options control the behaviour of &tdm; when attempting to open a connection to an &X-Server;. is the length of the pause (in seconds) between successive attempts, is the number of attempts to make and is the amount of time to spend on a connection attempt. After attempts have been made, or if seconds elapse in any particular connection attempt, the start attempt is considered failed. -The default is 5. - - - - - - -How many times &tdm; should attempt to start a foreign display listed in the Xservers file before giving up and disabling it. Local displays are attempted only once, and &XDMCP; displays are retried indefinitely by the client (unless the option was given to the &X-Server;). -The default is 4. - - - - - - -How many times &tdm; should attempt to start up a local &X-Server;. Starting up includes executing it and waiting for it to come up. -The default is 1. - - - - - - -How many seconds &tdm; should wait for a local &X-Server; to come up. -The default is 15. - - - - - - -See . -The default is 5. - - - - - - -To discover when remote displays disappear, &tdm; regularly pings them. specifies the time (in minutes) between the pings and specifies the maximum amount of time (in minutes) to wait for the terminal to respond to the request. If the terminal does not respond, the session is declared dead and terminated. If you frequently use X terminals which can become isolated from the managing host, you may wish to increase the timeout. The only worry is that sessions will continue to exist after the terminal has been accidentally disabled. -The default is 5. - - - - - - -Whether &tdm; should restart the local &X-Server; after session exit instead of resetting it. Use this if the &X-Server; leaks memory or crashes the system on reset attempts. -The default is false. - - - - - - -The signal number to use to reset the local &X-Server;. -The default is 1 (SIGHUP). - - - - - - -The signal number to use to terminate the local &X-Server;. -The default is 15 (SIGTERM). - - - - - - -Controls whether &tdm; generates and uses authorisation for local &X-Server; connections. For &XDMCP; displays the authorisation requested by the display is used; foreign non-&XDMCP; displays do not support authorisation at all. -The default is true. - - - - - - -If is true, use the authorisation mechanisms listed herein. The MIT-MAGIC-COOKIE-1 authorisation is always available; XDM-AUTHORIZATION-1, SUN-DES-1 and MIT-KERBEROS-5 might be available as well, depending on the build configuration. -The default is DEF_AUTH_NAME. - - - - - - -Some old &X-Server;s re-read the authorisation file at &X-Server; reset time, instead of when checking the initial connection. As &tdm; generates the authorisation information just before connecting to the display, an old &X-Server; would not get up-to-date authorisation information. This option causes &tdm; to send SIGHUP to the &X-Server; after setting up the file, causing an additional &X-Server; reset to occur, during which time the new authorisation information will be read. -The default is false. - - - - - - -This file is used to communicate the authorisation data from &tdm; to the &X-Server;, using the &X-Server; command line option. It should be kept in a directory which is not world-writable as it could easily be removed, disabling the authorisation mechanism in the &X-Server;. If not specified, a random name is generated from and the name of the display. -Empty by default. - - - - - - -This option specifies the name of the file to be loaded by xrdb as the resource database onto the root window of screen 0 of the display. KDE programs generally do not use X-resources, so this option is only needed if the program needs some X-resources. -Empty by default. - - - - - - -The xrdb program to use to read the X-resources file specified in . -The default is ${x_bindir}/xrdb. - - - - - - -This specifies a program which is run (as root) before offering the greeter window. This may be used to change the appearance of the screen around the greeter window or to put up other windows (e.g., you may want to run xconsole here). The conventional name for a file used here is Xsetup. See . -Empty by default. - - - - - - -This specifies a program which is run (as root) after the user authentication process succeeds. The conventional name for a file used here is Xstartup. See . -Empty by default. - - - - - - -This specifies a program which is run (as root) after the session terminates. The conventional name for a file used here is Xreset. See . -Empty by default. - - - - - - -This specifies the session program to be executed (as the user owning the session). The conventional name for a file used here is Xsession. See . -The default is ${x_bindir}/xterm -ls -T. - - - - - - -If the program fails to execute, &tdm; will fall back to this program. This program is executed with no arguments, but executes using the same environment variables as the session would have had (see ). -The default is ${x_bindir}/xterm. - - - - - - -The PATH environment variable for non-root s. The default depends on the system &tdm; was built on. - - - - - - -The PATH environment variable for all programs but non-root s. Note that it is good practice not to include . (the current directory) into this entry. The default depends on the system &tdm; was built on. - - - - - - -The SHELL environment variable for all programs but the . -The default is /bin/sh. - - - - - - -When &tdm; is unable to write to the usual user authorisation file ($HOME/.Xauthority), it creates a unique file name in this directory and points the environment variable XAUTHORITY at the created file. -The default is /tmp. - - - - - - -If enabled, &tdm; will automatically restart a session after an &X-Server; crash (or if it is killed by Alt-Ctrl-BackSpace). Note that enabling this feature opens a security hole: a secured display lock can be circumvented (unless &kde;'s built-in screen locker is used). -The default is false. - - - - - - -If disabled, do not allow root (and any other user with UID = 0) to log in directly. -The default is true. - - - - - - -If disabled, only users that have passwords assigned can log in. -The default is true. - - - - - - -Who is allowed to shut down the system. This applies both to the greeter and to the command FiFo. - - -None -no Shutdown... menu entry is shown at all - - -Root -the root password must be entered to shut down - - -All -everybody can shut down the machine - - -The default is All. - - - - - - -Who is allowed to abort active sessions when shutting down. - - -None -no forced shutdown is allowed at all - - -Root -the root password must be entered to shut down forcibly - - -All -everybody can shut down the machine forcibly - - -The default is All. - - - - - - -The default choice for the shutdown condition/timing. - - -Schedule -shut down after all active sessions exit (possibly at once) - - -TryNow -shut down, if no active sessions are open; otherwise, do nothing - - -ForceNow -shut down unconditionally - - -The default is Schedule. - - - - - - -How to offer shutdown scheduling options: - - -Never -not at all - - -Optional -as a button in the simple shutdown dialogues - - -Always -instead of the simple shutdown dialogues - - -The default is Never. - - - - - - -Enable password-less logins on this display. Use with extreme care! -The default is false. - - - - - - -The users that do not need to provide a password to log in. Items which are prefixed with @ represent all users in the user group named by that item. * means all users but root (and any other user with UID = 0). Never list root. -Empty by default. - - - - - - -Enable automatic login. Use with extreme care! -The default is false. - - - - - - -The user to log in automatically. Never specify root! -Empty by default. - - - - - - -The password for the user to log in automatically. This is not required unless the user is logged into a NIS or Kerberos domain. If you use this option, you should chmod  tdmrc for obvious reasons. -Empty by default. - - - - - - -A list of directories containing session type definitions. -The default is ${kde_datadir}/tdm/sessions. - - - - - - -The file (relative to the user's home directory) to redirect the session output to. One occurrence of %s in this string will be substituted with the display name. Use %% to obtain a literal %. -The default is .xsession-errors. - - - - - - - - -The [X-*-Greeter] section class of &tdmrc; - -This section class contains options concerning the configuration of the &tdm; frontend (greeter). - - - - - - -Specify the widget style for the greeter. Empty means to use the built-in default which currently is Keramik. -Empty by default. - - - - - - -Specify the widget colour scheme for the greeter. Empty means to use the built-in default which currently is yellowish grey with some light blue and yellow elements. -Empty by default. - - - - - - -What should be shown in the greeter righthand of the input lines (if is disabled) or above them (if is enabled): - - -None -nothing - - -Logo -the image specified by - - -Clock -a neat analogue clock - - -The default is Clock. - - - - - - -The image to show in the greeter if is Logo. -Empty by default. - - - - - - -The relative coordinates (percentages of the screen size; X,Y) at which the centre of the greeter is put. &tdm; aligns the greeter to the edges of the screen it would cross otherwise. -The default is 50,50. - - - - - - -The screen the greeter should be displayed on in multi-headed and Xinerama setups. The numbering starts with 0. For Xinerama, it corresponds to the listing order in the active ServerLayout section of XF86Config; -1 means to use the upper-left screen, -2 means to use the upper-right screen. - - - - - - -The headline in the greeter. An empty greeting means none at all. The following character pairs are replaced by their value: - -%d -name of the current display - - -%h -local host name, possibly with the domain name - - -%n -local node name, most probably the host name without the domain name - - -%s -operating system - - -%r -operating system version - - -%m -machine (hardware) type - - -%% -a single % - - - -The default is Welcome to %s at %n. - - - - - - -The font for the greeter headline. -The default is charter,24,bold. - - - - - - -The normal font used in the greeter. -The default is helvetica,12. - - - - - - -The font used for the Login Failed message. -The default is helvetica,12,bold. - - - - - - -Whether the fonts used in the greeter should be antialiased. -The default is false. - - - - - - -What to do with the Num Lock modifier for the time the greeter is running: - - -Off -turn off - - -On -turn on - - -Keep -do not change the state - - -The default is Keep. - - - - - - -Language and locale to use in the greeter, encoded like $LC_LANG. -The default is en_US. - - - - - - -Enable autocompletion in the username line edit. -The default is false. - - - - - - -Show a user list with unix login names, real names and images in the greeter. -The default is true. - - - - - - -This option controls which users will be shown in the user view () and/or offered for autocompletion (). If it is Selected, contains the final list of users. If it is NotHidden, the initial user list are all users found on the system. Users contained in are removed from the list, just like all users with a UID greater than specified in and users with a non-zero UID less than specified in . Items in and which are prefixed with @ represent all users in the user group named by that item. Finally, the user list will be sorted alphabetically, if is enabled. -The default is NotHidden. - - - - - - -See . -Empty by default. - - - - - - -See . -Empty by default. - - - - - - -See . - - - - - - -See . -The default is 65535. - - - - - - -See . -The default is true. - - - - - - -If is enabled, this specifies where &tdm; gets the images from: - - -AdminOnly -from <>/$USER.face[.icon] - - -PreferAdmin -prefer <>, fallback on $HOME - - -PreferUser -... and the other way round - - -UserOnly -from the user's $HOME/.face[.icon] - - - -The images can be in any format Qt recognises, but the filename must match &tdm;'s expectations: .face.icon should be a 48x48 icon, while .face should be a 300x300 image. Currently the big image is used only as a fallback and is scaled down, but in the future it might be displayed full-size in the logo area or a tooltip. -The default is AdminOnly. - - - - - - -See . -The default is ${kde_datadir}/tdm/faces. - - - - - - -Specify, if/which user should be preselected for log in: - - -None -do not preselect any user - - -Previous -the user which successfully logged in last time - - -Default -the user specified in the option - - - -If is enabled and a user was preselected, the cursor is placed in the password input field automatically. -Enabling user preselection can be considered a security hole, as it presents a valid login name to a potential attacker, so he only needs to guess the password. On the other hand, one could set to a fake login name. - -The default is None. - - - - - - -See . -Empty by default. - - - - - - -See . -The default is false. - - - - - - -The password input fields cloak the typed in text. Specify, how to do it: - - -OneStar -* is shown for every typed letter - - -ThreeStars -*** is shown for every typed letter - - -NoEcho -nothing is shown at all, the cursor does not move - - -The default is OneStar. - - - - - - -If enabled, &tdm; will automatically start the krootimage program to set up the background; otherwise, the program is responsible for the background. -The default is true. - - - - - - -The configuration file to be used by krootimage. It contains a section named [Desktop0] like kdesktoprc does. Its options are not described herein; guess their meanings or use the control centre. -The default is ${kde_confdir}/tdm/backgroundrc. - - - - - - -To improve security, the greeter grabs the &X-Server; and then the keyboard when it starts up. This option specifies if the &X-Server; grab should be held for the duration of the name/password reading. When disabled, the &X-Server; is ungrabbed after the keyboard grab succeeds; otherwise, the &X-Server; is grabbed until just before the session begins. -Enabling this option disables and . - -The default is false. - - - - - - -This option specifies the maximum time &tdm; will wait for the grabs to succeed. A grab may fail if some other X-client has the &X-Server; or the keyboard grabbed, or possibly if the network latencies are very high. You should be cautious when raising the timeout, as a user can be spoofed by a look-alike window on the display. If a grab fails, &tdm; kills and restarts the &X-Server; (if possible) and the session. -The default is 3. - - - - - - -Warn, if a display has no X-authorisation. This will be the case if - the authorisation file for a local &X-Server; could not be created, - a remote display from &XDMCP; did not request any authorisation or - the display is a foreign display from the Xservers file. - - -The default is true. - - - - - - -Specify whether the greeter of local displays should start up in host chooser (remote) or login (local) mode and whether it is allowed to switch to the other mode. - - -LocalOnly -only local login possible - - -DefaultLocal -start up in local mode, but allow switching to remote mode - - -DefaultRemote -... and the other way round - - -RemoteOnly -only choice of remote host possible - - -The default is LocalOnly. - - - - - - -A list of hosts to be automatically added to the remote login menu. The special name * means broadcast. Has no effect if is LocalOnly. -The default is *. - - - - - - -Use this number as a random seed when forging saved session types, etc. of unknown users. This is used to avoid telling an attacker about existing users by reverse conclusion. This value should be random but constant across the login domain. - - - - - - -Enable &tdm;'s built-in xconsole. Note that this can be enabled for only one display at a time. This option is available only if &tdm; was configured with . -The default is false. - - - - - - -The data source for &tdm;'s built-in xconsole. If empty, a console log redirection is requested from /dev/console. Has no effect if is disabled. -Empty by default. - - - - - - -Specify conversation plugins for the login dialogue; the first in the list is selected initially. Each plugin can be specified as a base name (which expands to $kde_modulesdir/kgreet_base) or as a full pathname. Conversation plugins are modules for the greeter which obtain authentication data from the user. Currently only the classic plugin is shipped with &kde;; it presents the well-known username and password form. -The default is classic. - - - - - - -Same as , but for the shutdown dialogue. -The default is classic. - - - - - - -A list of options of the form Key=Value. The conversation plugins can query these settings; it is up to them what possible keys are. -Empty by default. - - - - - - -Show the Console Login action in the greeter. For this to work, a console must be configured for this particular display, see . -The default is true. - - - - - - -Show the Restart X Server/Close Connection action in the greeter. -The default is true. - - - - - - -A program to run while the greeter is visible. It is supposed to preload as much as possible of the session that is going to be started (most probably). -Empty by default. - - - - - - - - - - - -Specifying permanent &X-Server;s - -Each specification indicates a display which should constantly be managed and which is not using &XDMCP;. This method is typically used only for local &X-Server;s that are started by &tdm;, but &tdm; can manage externally started (foreign) &X-Server;s as well, may they run on the local machine or rather remotely. - -The formal syntax of a specification is -display name [display class] local[@tty] [reserve] server command - for own &X-Server;s and -display name [display class] foreign - for foreign &X-Server;s. - -The display name must be something that can be passed in the option to an X program. This string is used to generate the display-specific section names, so be careful to match the names. The display name of &XDMCP; displays is derived from the display's address by reverse host name resolution. For configuration purposes, the localhost prefix from locally running &XDMCP; displays is not stripped to make them distinguishable from local &X-Server;s started by &tdm;. - -The display class portion is also used in the display-specific sections. This is useful if you have a large collection of similar displays (such as a corral of X terminals) and would like to set options for groups of them. When using &XDMCP;, the display is required to specify the display class, so the manual for your particular X terminal should document the display class string for your device. If it does not, you can run &tdm; in debug mode and grep the log for class. - -The tty specifies which text console an &X-Server; is covering, so &tdm; knows which console it should monitor for activity after switching to Console login to find out when the console session ends. Note that this concept (originating from Solaris) is not perfectly suited for Linux, as there &X-Server;s run on separate virtual terminals and consequently do not actually cover consoles (gettys). - -The reserve keyword instructs &tdm; to start the display not when &tdm; starts up, but when it is explicitly requested via the command FiFo. If reserve displays are specified, the &kde; menu will have a Start New Session item near the bottom; use that to activate a reserve display with a new login session. The monitor will switch to the new display, and you will have a minute to login. If there are no more reserve displays available, selecting the menu item will have no effect. - -The server command specifies the complete &X-Server; command line, including a display number for secondary displays. When &tdm; starts a session, it sets up authorisation data for the &X-Server;. For local servers, &tdm; passes  filename on the &X-Server;'s command line to point it at its authorisation data. For &XDMCP; displays, &tdm; passes the authorisation data to the &X-Server; via the Accept &XDMCP; message. - - - - -&XDMCP; access control - -The file specified by the option provides information which &tdm; uses to control access from displays requesting service via &XDMCP;. The file contains four types of entries: entries which control the response to Direct and Broadcast queries, entries which control the response to Indirect queries, macro definitions for Indirect entries and entries which control on which network interfaces &tdm; listens for &XDMCP; queries. Blank lines are ignored, # is treated as a comment delimiter causing the rest of that line to be ignored and \ causes an immediately following newline to be ignored, allowing indirect host lists to span multiple lines. - -The format of the Direct entries is simple, either a host name or a pattern, which is compared against the host name of the display device. Patterns are distinguished from host names by the inclusion of one or more meta characters; * matches any sequence of 0 or more characters, and ? matches any single character. If the entry is a host name, all comparisons are done using network addresses, so any name which converts to the correct network address may be used. Note that only the first network address returned for a host name is used. For patterns, only canonical host names are used in the comparison, so ensure that you do not attempt to match aliases. Host names from &XDMCP; queries always contain the local domain name even if the reverse lookup returns a short name, so you can use patterns for the local domain. Preceding the entry with a ! character causes hosts which match that entry to be excluded. To only respond to Direct queries for a host or pattern, it can be followed by the optional NOBROADCAST keyword. This can be used to prevent a &tdm; server from appearing on menus based on Broadcast queries. - -An Indirect entry also contains a host name or pattern, but follows it with a list of host names or macros to which the queries should be forwarded. Indirect entries can be excluding as well, in which case a (valid) dummy host name must be supplied to make the entry distinguishable from a Direct entry. If compiled with IPv6 support, multicast address groups may also be included in the list of addresses the queries are forwarded to. If the indirect host list contains the keyword CHOOSER, Indirect queries are not forwarded, but instead a host chooser dialogue is displayed by &tdm;. The chooser will send a Direct query to each of the remaining host names in the list and offer a menu of all the hosts that respond. The host list may contain the keyword BROADCAST, to make the chooser send a Broadcast query as well; note that on some operating systems, UDP packets cannot be broadcast, so this feature will not work. - -When checking access for a particular display host, each entry is scanned in turn and the first matching entry determines the response. Direct and Broadcast entries are ignored when scanning for an Indirect entry and vice-versa. - -A macro definition contains a macro name and a list of host names and other macros that the macro expands to. To distinguish macros from hostnames, macro names start with a % character. - -The last entry type is the LISTEN directive. The formal syntax is - LISTEN [interface [multicast list]] - If one or more LISTEN lines are specified, &tdm; listens for &XDMCP; requests only on the specified interfaces. interface may be a hostname or IP address representing a network interface on this machine, or the wildcard * to represent all available network interfaces. If multicast group addresses are listed on a LISTEN line, &tdm; joins the multicast groups on the given interface. For IPv6 multicasts, the IANA has assigned ff0X:0:0:0:0:0:0:12b as the permanently assigned range of multicast addresses for &XDMCP;. The X in the prefix may be replaced by any valid scope identifier, such as 1 for Node-Local, 2 for Link-Local, 5 for Site-Local, and so on (see IETF RFC 2373 or its replacement for further details and scope definitions). &tdm; defaults to listening on the Link-Local scope address ff02:0:0:0:0:0:0:12b to most closely match the IPv4 subnet broadcast behavior. If no LISTEN lines are given, &tdm; listens on all interfaces and joins the default &XDMCP; IPv6 multicast group (when compiled with IPv6 support). To disable listening for &XDMCP; requests altogether, a LISTEN line with no addresses may be specified, but using the [Xdmcp] option is preferred. - - - - -Supplementary programs - -The following programs are run by &tdm; at various stages of a session. They typically are shell scripts. - -The Setup, Startup and Reset programs are run as root, so they should be careful about security. Their first argument is auto if the session results from an automatic login; otherwise, no arguments are passed to them. - - -Setup program - -The Xsetup program is run after the &X-Server; is started or reset, but before the greeter is offered. This is the place to change the root background (if is disabled) or bring up other windows that should appear on the screen along with the greeter. - -In addition to any specified by , the following environment variables are passed: - - - DISPLAY - the associated display name - - - PATH - the value of - - - SHELL - the value of - - - XAUTHORITY - may be set to an authority file - - - DM_CONTROL - the value of - - - -Note that since &tdm; grabs the keyboard, any other windows will not be able to receive keyboard input. They will be able to interact with the mouse, however; beware of potential security holes here. If is set, Xsetup will not be able to connect to the display at all. Resources for this program can be put into the file named by . - - - - -Startup program - -The Xstartup program is run as root when the user logs in. This is the place to put commands which add entries to utmp (the sessreg program may be useful here), mount users' home directories from file servers, or abort the session if some requirements are not met (but note that on modern systems, many of these tasks are already taken care of by PAM modules). - -In addition to any specified by , the following environment variables are passed: - - - DISPLAY - the associated display name - - - HOME - the initial working directory of the user - - - LOGNAME - the username - - - USER - the username - - - PATH - the value of - - - SHELL - the value of - - - XAUTHORITY - may be set to an authority file - - - DM_CONTROL - the value of - - - -&tdm; waits until this program exits before starting the user session. If the exit value of this program is non-zero, &tdm; discontinues the session and starts another authentication cycle. - - - - -Session program - -The Xsession program is the command which is run as the user's session. It is run with the permissions of the authorised user. One of the keywords failsafe, default or custom, or a string to eval by a Bourne-compatible shell is passed as the first argument. - -In addition to any specified by , the following environment variables are passed: - - - DISPLAY - the associated display name - - - HOME - the initial working directory of the user - - - LOGNAME - the username - - - USER - the username - - - PATH - the value of (or for root user sessions) - - - - SHELL - the user's default shell - - - XAUTHORITY - may be set to a non-standard authority file - - - KRBTKFILE - may be set to a Kerberos4 credentials cache name - - - - KRB5CCNAME - may be set to a Kerberos5 credentials cache name - - - - DM_CONTROL - the value of - - - XDM_MANAGED - will contain a comma-separated list of parameters the session might find interesting, like the location of the command FiFo and its capabilities, and which conversation plugin was used for the login - - - - DESKTOP_SESSION - the name of the session the user has chosen to run - - - - - - - -Reset program - -Symmetrical with Xstartup, the Xreset program is run after the user session has terminated. Run as root, it should contain commands that undo the effects of commands in Xstartup, removing entries from utmp or unmounting directories from file servers. - -The environment variables that were passed to Xstartup are also passed to Xreset. - - - - - - diff --git a/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.am new file mode 100644 index 00000000000..bd0d1eb0c27 --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = en_GB +SUBDIRS = $(AUTODIRS) +KDE_DOCS = tdm +KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.in new file mode 100644 index 00000000000..d9e7e8726f1 --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/tdm/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdebase/tdm +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = en_GB +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = tdm +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=tdmrc-ref.docbook Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) tdmrc-ref.docbook index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm + @for base in tdmrc-ref.docbook index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ + done + +uninstall-nls: + for base in tdmrc-ref.docbook index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in tdmrc-ref.docbook index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-en_GB/docs/tdebase/tdm/index.cache.bz2 b/tde-i18n-en_GB/docs/tdebase/tdm/index.cache.bz2 new file mode 100644 index 00000000000..ba71a9916b9 Binary files /dev/null and b/tde-i18n-en_GB/docs/tdebase/tdm/index.cache.bz2 differ diff --git a/tde-i18n-en_GB/docs/tdebase/tdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/tdm/index.docbook new file mode 100644 index 00000000000..c0c5a7e2a2a --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/tdm/index.docbook @@ -0,0 +1,1812 @@ + + + + tdmrc"> + XDMCP"> + xdm"> + + + +]> + + + +The &tdm; Handbook + + +&Oswald.Buddenhagen; &Oswald.Buddenhagen.mail; + +JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English + + + + +2000 +&Neal.Crook; + + + +2002 +&Oswald.Buddenhagen; + + + +2003 +&Lauri.Watts; + + +2003-03-01 +0.05.02 + + +This document describes &tdm; the &kde; Display Manager. &tdm; is also known as the Login Manager. + + + +KDE +tdm +xdm +display manager +login manager + + + + + +Introduction + +&tdm; provides a graphical interface that allows you to log in to a system. It prompts for login (username) and password, authenticates the user and starts a session. &tdm; is superior to &xdm;, the X Display Manager, in a number of ways. + + + + + + + +Quick Start Guide + +This is a quick start guide for users who fit the following pattern: + + + +X is configured and works with the command startx from the commandline. + + +Each user will generally only use a single window manager or desktop environment, and does not change this choice very often, or is comfortable editing a single text file in order to change their choice. + + + +This scenario will be sufficient for many environments where a single user or several users normally boot the computer and log into their preferred environment. + + +Setting up a Default Session + +Create or open the file ~/.xinitrc +If you already have a working ~/.xinitrc, go to the next step + + +If one does not already exist, add a line to the ~/.xinitrc to start your preferred window manager or desktop environment. +For &kde; you should enter: +starttde +For other window managers or desktop environments, you should look in their documentation for the correct command. + +Make a link as follows: +ln ~/.xinitrc ~/.xsession + + + +At this point, typing startx on the commandline should start X, with a &kde; session. The next task is to try &tdm;. + +As root, type tdm at the prompt. + +You should see a login window, which is described more fully in. + +Typing your normal username and password in the fields provided, and leaving selected as the session type should now open a &kde; session for your user. + +If you have other users to configure, you should repeat the procedure above for each of them. + + +This is a quick guide to getting up and running only. You probably will want to customise &tdm; further, for example, to hide the names of the system accounts, to allow further sessions, and much more. Please read through the rest of this manual to find out how to do these things. + + + + + +The Login Window + +The user interface to &tdm; consists of two dialogue boxes. The main dialogue box has these controls: + + + +A Username: field for you to enter your username. + + + +A Password: field for you to enter your password. + + + +(Optionally) a graphical image of each user (for example, a digitised photograph). Clicking on an image is equivalent to typing the associated username into the Username: field. (This feature is an imitation of the login box on IRIX). + + +A Menu drop-down box that allows &tdm; to be used to start sessions with various different window managers or desktop environments installed on the system. + + + +(Optionally) a region to the right of the Username:, Password: and Session Type: fields which can be used to display either a static image or an analogue clock. + + + +A Login button that validates the username/password combination and attempts to start a session of the selected type. + + + +A Clear button that clears the text from the Login and Pass fields. + + + +(Optionally) A Shutdown button that displays the Shutdown dialogue box. + + +A Menu button that opens an action menu with the following items: + + + +(On local displays) a Restart X Server item that terminates the currently running &X-Server;, starts a new one and displays the login dialogue again. You can use this if the display content seems to be broken somehow. + + + +(On remote displays) A Close Connection item that closes the connection to the XDMCP server you are currently connected to. If you got to this server through a host chooser, this will bring you back to the chooser, otherwise it will only reset the &X-Server; and bring up the login dialogue again. + + + +(Optionally on local displays) A Console Mode item that terminates the currently running &X-Server; and leaves you alone with a console login. &tdm; will resume the graphical login if nobody is logged in at the console for some time. To make this work, you need to use the local@<console> syntax in the Xservers file (see comments in that file). + + + + + +(Optionally) A Shutdown... button that displays the shutdown dialogue box. + + + +The Shutdown dialogue box presents a set of radio buttons that allow one of these options to be selected: + + + +Shutdown +Shut the system down in a controlled manner, ready for power-down. + + +Restart +Shut the system down and reboot. For systems that use Lilo, an optional drop-down box allows you to select a particular operating-system kernel to be used for the reboot. + + + +Restart X Server + +Stop and then restart the X-server. Typically, you might need to use this option if you have changed your X11 configuration in some way. + + + +Console Mode + +Stop the &X-Server; and return the system to console mode. This is achieved by bringing the system down to run-level 3. Typically, the system manager might need to use this option before upgrading or re-configuring X11 software. + + + + +Pressing the OK button initiates the selected action; pressing the Cancel button returns to the main &tdm; dialogue box. + + + + + +Configuring &tdm; + +This chapter assumes that &tdm; is already up and running on your system, and that you simply want to change its behaviour in some way. + +When &tdm; starts up, it reads its configuration from the folder $TDEDIR/share/config/tdm/ (this may be /etc/kde3/tdm/ or something else on your system). + +The main configuration file is &tdmrc;; all other files are referenced from there and could be stored under any name anywhere on the system - but usually that would not make much sense for obvious reasons (one particular exception is referencing configuration files of an already installed &xdm; - however when a new &tdm; is installed, it will import settings from those files if it finds an already installed &xdm;). + +Since &tdm; must run before any user is logged in, it is not associated with any particular user. Therefore, it is not possible to have user-specific configuration files; all users share the common &tdmrc;. It follows from this that the configuration of &tdm; can only be altered by those users that have write access to $TDEDIR/share/config/tdm/tdmrc (normally restricted to system administrators logged in as root). + +You can view the &tdmrc; file currently in use on your system, and you can configure &tdm; by editing this file. Alternatively, you can use the graphical configuration tool provided by the &kcontrolcenter; (under System AdministrationLogin Manager), which is described in the &kcontrol; help files. + +The remainder of this chapter describes configuration of &tdm; via the &kcontrol; module, and the next chapter describes the options available in &tdmrc; itself. If you only need to configure for local users, the &kcontrol; module should be sufficient for your needs. If you need to configure remote logins, or have multiple &tdm; sessions running, you will need to read on. + + + + +&Thomas.Tanghus; &Thomas.Tanghus.mail; +&Steffen.Hansen; &Steffen.Hansen.mail; +&Mike.McBride; &Mike.McBride.mail; +JohnKnight
anarchist_tomato@herzeleid.net
Conversion to British English + + + +The Login Manager &kcontrol; Module + +Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. + +All settings will be written to the configuration file &tdmrc;, which in it's original state has many comments to help you configure &tdm;. Using this &kcontrol; module will strip these comments from the file. All available options in &tdmrc; are covered in . + +The options listed in this chapter are cross referenced with their equivalents in &tdmrc;. All options available in the &kcontrol; module are also available directly in &tdmrc; but the reverse is not true. + +In order to organise all of these options, this module is divided into several sections: Appearance, Font, Background, Shutdown, Users and Convenience. + +You can switch between the sections using the tabs at the top of the window. + +If you are not currently logged in as a superuser, you will need to click the Administrator Mode Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. + + +Appearance + +From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. + +The Greeting: is the title of the login screen. Setting this is especially useful if you have many servers users may log in to. You may use various placeholders, which are described along with the corresponding key in &tdmrc;. + +You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled Logo area:. This corresponds to in &tdmrc; + +If you chose Show logo you can now choose a logo: + + + +Drop an image file on the image button. + + +Click on the image button and select a new image from the image chooser dialogue. + + + +If you do not specify a logo the default $TDEDIR/share/apps/tdm/pics/kdelogo.xpm will be displayed. + +Normally the login box is centred on the screen. Use the Position: options if you want it to appear elsewhere on the screen. You can specify the relative position (percentage of the screen size) for the centre of the login window, relative to the top left of the display, in the fields labelled X: and Y: respectively. These correspond to the key in &tdmrc;. + +While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style: and Colour Scheme: options. These correspond to the keys and in &tdmrc; respectively. + +Below that, you have a dropdown box to choose the language for your login box, corresponding to setting in &tdmrc;. + + + + +Font + +From this section of the module you can change the fonts used in the login window. Only fonts available to all users are available here, not fonts you have installed on a per user basis. + +You can select three different font styles from the drop down box (General:, Failures:, Greeting). When you click on the Choose... button a dialogue appears from which you can select the new characteristics for the font style. + + + +The General: font is used in all other places in the login window. + + +The Failures: font is used when a login fails. + + +The Greeting: font is the font used for the title (Greeting String). + + + +You can also check the box labelled Use anti-aliasing for fonts if you want smoothed fonts in the login dialogue. + +An example of each font can be seen in the Example Box. + + + + +Background + +Here you can change the desktop background which will be displayed before a user logs in. You can have a single colour or an image as a background. If you have an image as the background and select centre, the selected background colour will be used around the image if it is not large enough to cover the entire desktop. + +The background colours and effects are controlled by the options on the tab labelled Background and you select a background image and its placement from the options on the tab labelled Wallpaper. + +To change the default background colour(s) simply click either of the colour buttons and select a new colour. + +The dropdown box above the colour buttons provides you with several different blend effects. Choose one from the list, and it will be previewed on the small monitor at the top of the window. Your choices are: + + + +Flat +By choosing this mode, you select one colour (using the colour button labelled Colour 1), and the entire background is covered with this one colour. + + +Pattern +By choosing this mode, you select two colours (using both colour buttons). You then select a pattern by clicking Setup. This opens a new dialogue window, which gives you the opportunity to select a pattern. Simply click once on the pattern of your choice, then click on OK, and &kde; will render the pattern you selected using the two colours you selected. For more on patterns, see the section Background: Adding, Removing and Modifying Patterns. + + +Background Program +By selecting this option, you can have &kde; use an external program to determine the background. This can be any program of your choosing. For more information on this option, see the section entitled Background: Using an external program. + + +Horizontal Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the left edge of the screen, and slowly transform into the colour selected by Colour 2 by the time it gets to the right edge of the screen. + + +Vertical Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 on the top edge of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the bottom of the screen. + + +Pyramid Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. + + +Pipecross Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 1 in each corner of the screen, and slowly transform into the colour selected by Colour 2 as it moves to the centre of the screen. The shape of this gradient is different then the pyramid gradient. + + +Elliptic Gradient +By choosing this mode, you select two colours (using both colour buttons). &kde; will then start with the colour selected by Colour 2 in the centre of the screen, and slowly transform into the colour selected by Colour 1 as it moves to the edges, in an elliptical pattern. + + + +The setup button is only needed for if you select Background program or Patterns. In these instances, another window will appear to configure the specifics. +Wallpaper +To select a new background image first, click on the Wallpapers tab, then you can either select an image from the drop-down list labelled Wallpaper or select Browse... and select an image file from a file selector. + +The image can be displayed in six different ways: + + +No wallpaper +No image is displayed. Just the background colours. + + +Centred +The image will be centred on the screen. The background colours will be present anywhere the image does not cover. + + +Tiled +The image will be duplicated until it fills the entire desktop. The first image will be placed in the upper left corner of the screen, and duplicated downward and to the right. + + +Centre Tiled +The image will be duplicated until it fills the entire desktop. The first image will be placed in the centre of the screen, and duplicated upwards, downwards to the right, and to the left. + + +Centred Maxpect +The image will be placed in the centre of the screen. It will be scaled to fit the desktop, but it will not change the aspect ratio of the original image. This will provide you with an image that is not distorted. + + +Scaled +The image will be scaled to fit the desktop. It will be stretched to fit all four corners. + + + + + + +<guilabel +>Shutdown</guilabel +> + +Allow Shutdown +Use these dropdown box to choose who is allowed to shut down: + + +Nobody: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command. + + +Everybody: Everyone can shutdown the computer using &tdm;. + +Only Root: &tdm; requires that the root password be entered before shutting down the computer. + + +You can independently configure who is allowed to issue a shutdown command for the Local: and Remote: users. + +Commands Use these text fields to define the exact shutdown command. The Halt: command defaults to /sbin/halt. The restart command defaults to /sbin/reboot. + +When Show boot options is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your lilo command and to lilo's map file. + + + +Session types + +Define which session types should be accessible from the login window. + +For more information on this subject, look at /etc/X11/xdm/Xsession to find your xdm setup files. Also review the xdm man pages, especially under the SESSION PROGRAM section. + +To add a session, type its name in the blank entitled New types, and click Add new. + +To remove a session, select the session from the list and click Remove. + + + + +Users + +From here you can change the way users are represented in the login window. + +You may disable the user list in &tdm; entirely in the Show Users section. You can choose from: + + +None + +Do not show any users. This is the most secure setting, since an attacker would then have to guess a valid login name as well as a password. It's also the preferred option if you have more than a handful of users to list, or the list itself would become unwieldy. + + + +Selected only + +Only show users you have specifically enabled. + + + +Not hidden + +Allows you to select a list of users that should not be shown, and all other users will be listed. + + + + +Independently of the users you specify by name, you can use the System UIDs to specify a range of valid UIDs that are shown in the list. By default user id's under 1000, which are often system or daemon users, and user id's over 65000, are not shown. + +You can also enable the Sort users checkbox, to have the user list sorted alphabetically. If this is disabled, users will appear in the order they are listed in the password file. + +If you choose to show users, then the login window will show images (which you select), of a list of users. When someone is ready to login, they may select their user name/image, enter their password, and they are granted access. + +If you permit a user image, then you can configure the source for those images. + +The available options for the User Image Source are: + + +You can configure the admin picture here, for each user on the system. Depending on the order selected above, users may be able to override your selection. + +If you choose not to show users, then the login window will be more traditional. Users will need to type their username and password to gain entrance. This is the preferred way if you have many users on this terminal. + + +To show (and sort) or not to show users + +Along the right edge of the window are two check boxes: + +If Show users is selected you have chosen to show images of users, instead of making them type their login name. + +If Sort users is selected, then the list of users will be sorted alphabetically in the login window. If unchecked, users will be listed in the same order as they are on this page. If Show users is not checked, this has no effect. + + + + +How to determine which users to show and which users to hide + +Below the user image box, and above the Show users check box, is a set of two radio buttions: + + +Show only selected users: If this option is selected, only the users contained in the list labelled Selected Users, will be displayed in the login window. If Show users is not checked, this has no effect. +Show all users but no-show users: If this option is selected, all users will be listed, except those users contained in the list entitled No show users. If Show users is not checked, this has no effect. + + + + + +Select users + +This page contains three listboxes. The large listbox on the left shows all the users on the system which might be a genuine user. + +The top rightmost listbox shows the selected users and the bottom rightmost listbox shows the users we do not want displayed in the login window. + +To move a user from one listbox to another you click on the username in the listbox and click >> to move the user from the leftmost box the the rightmost box or << to move the user from the rightmost box to the leftmost box. + + + + +Images + +This section of the manual only applies if Show users is selected. If it is not, this image box has no effect. + +Every user on the system can be represented by an image. The image for each user is kept in a file called $TDEDIR/share/apps/tdm/pics/users/$USER.xpm. If there is no such file for a particular user, the file $TDEDIR/share/apps/tdm/pics/users/default.xpm will be used instead. + +To assign a new image to a user just select the user in one of the listboxes and either drop an imagefile on the image button to the right or click on the image button and select a new image from the image selector. + +If no user is currently selected you will be asked if you want to change the default image. + +The replacement is performed by a &konqueror; process so if the imagefile already exists you will be prompted by &konqueror; if you want to replace it. If you confirm the image will be replaced - you will NOT have to press the Apply button. + + + + + +Convenience + +In the convenience tab you can configure some options that make life easier for lazy people, like automatic login or disabling passwords. + +Please think more than twice before using these options. Every option in the Convenience tab is well-suited to seriously compromise your system security. Practically, these options are only to be used in a completely non-critical environment, ⪚ a private computer at home. + + +Automatic Login + +Automatic login will give anyone access to a certain account on your system without doing any authentication. You can enable it using the option Enable auto-login. + +You can choose the account to be used for automatic login from the list labelled User:. + + + + +<guilabel +>Password-Less Login</guilabel +> + +Using this feature, you can allow certain users to login without having to provide their password. Enable this feature using the Enable password-less logins option. + +Below this option you'll see a list of users on the system. Enable password-less login for specific users by checking the checkbox next to the login names. By default, this feature is disabled for all users. + +Again, this option should only be used in a safe environment. If you enable it on a rather public system you should take care that only users with heavy access restrictions are granted password-less login, ⪚ guest. + +The Automatically login after X server crash option allows you to skip the authentication procedure when your X server accidentally crashed. + +You can also choose which user is preselected when &tdm; starts. The default is None, but you can choose Previous to have &tdm; default to the last successfully logged in user, or you can Specify a particular user to always be selected from the list. You can also have &tdm; set the focus to the password field, so that when you reach the &tdm; login screen, you can type the password immediately. + + + + + + + + + +&tdmrc-ref; + + + +Configuring your system to use &tdm; + +This chapter assumes that your system is already configured to run the X Window System, and that you only need to reconfigure it to allow graphical login. + + +Setting up &tdm; + +The fundamental thing that controls whether your computer boots to a terminal prompt (console mode) or a graphical login prompt is the default runlevel. The runlevel is set by the program /sbin/init under the control of the configuration file /etc/inittab. The default runlevels used by different &UNIX; systems (and different &Linux; distributions) vary, but if you look at /etc/inittab the start of it should be something like this: + +# Default runlevel. The runlevels used by RHS are: +# 0 - halt (Do NOT set initdefault to this) +# 1 - Single user mode +# 2 - Multiuser, without NFS +# 3 - Full multiuser mode +# 4 - unused +# 5 - X11 +# 6 - reboot (Do NOT set initdefault to this) + +id:3:initdefault: + + +All but the last line of this extract are comments. The comments show that runlevel 5 is used for X11 and that runlevel 3 is used for multi-user mode without X11 (console mode). The final line specifies that the default runlevel of the system is 3 (console mode). If your system currently uses graphical login (for example, using &xdm;) its default runlevel will match the runlevel specified for X11. + +The runlevel with graphical login (&xdm;) for some common &Linux; distributions are: + + +5 for &RedHat; 3.x and later, and for &Mandrake; +4 for Slackware +3 for &SuSE;. 4.x and 5.x + + +The first step in configuring your system is to ensure that you can start &tdm; from the command line. Once this is working, you can change your system configuration so that &tdm; starts automatically each time you reboot your system. + +To test &tdm;, you must first bring your system to a runlevel that does not run &xdm;. To do so, issue a command like this: + +/sbin/init + +Instead of the number you should specify the appropriate runlevel for console mode on your system. + +If your system uses Pluggable Authentication Modules (PAM), which is normal with recent &Linux; and Solaris systems, you should check that your PAM configuration permits login through the service named kde. If you previously used &xdm; successfully, you should not need to make any changes to your PAM configuration in order to use &tdm;. /etc/pam.conf or /etc/pam.d/kde. Information on configuring PAM is beyond the scope of this handbook, but PAM comes with comprehensive documentation (try looking in /usr/share/doc/*pam*/html/). + +Now it's time for you to test &tdm; by issuing the following command: + +tdm + + +If you get a &tdm; login dialogue and you are able to log in, things are going well. The main thing that can go wrong here is that the run-time linker might not find the shared &Qt; or &kde; libraries. If you have a binary distribution of the &kde; libraries, make sure &tdm; is installed where the libraries believe &kde; is installed and try setting some environment variables to point to your &kde; and &Qt; libraries. + +For example: + +export + +export + +export + +export + + + +If you are still unsuccessful, try starting &xdm; instead, to make sure that you are not suffering from a more serious X configuration problem. + +When you are able to start &tdm; successfully, you can start to replace &xdm; by &tdm;. Again, this is distribution-dependent. + + + +For &RedHat;, edit /etc/inittab, look for the string xdm and replace it with &tdm; (including all paths). + + +For &Mandrake;, the X11 runlevel in /etc/inittab invokes the shell script /etc/X11/prefdm, which is set up to select from amongst several display managers, including &tdm;. Make sure that all the paths are correct for your installation. + + +For &SuSE;, edit /sbin/init.d/xdm to add a first line: + +. /etc/rc.config +DISPLAYMANAGER=tdm +export DISPLAYMANAGER + +For FreeBSD, edit /etc/ttys and find the line like this: ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure and edit it to this: ttyv8 "/usr/local/bin/tdm -nodaemon" xterm on secure + + + +Most other distributions are a variation of one of these. + + +At this stage, you can test &tdm; again by bringing your system to the runlevel that should now run &tdm;. To do so, issue a command like this: + +/sbin/init + + +Instead of the number you should specify the appropriate runlevel for running X11 on your system. + +The final step is to edit the initdefault entry in /etc/inittab to specify the appropriate runlevel for X11. + +Before you make this change, ensure that you have a way to reboot your system if a problem occurs. This might be a rescue floppy-disk provided by your operating system distribution or a specially-designed rescue floppy-disk, such as tomsrtbt. Ignore this advice at your peril. + +When you reboot your system, you should end up with the graphical &tdm; login dialogue. + +If this step is unsuccessful the most likely problem is that the environment used at boot time differs from the environment that you used for testing at the command line. If you are trying to get two versions of KDE to co-exist, be particularly careful that the settings you use for your PATH and LD_LIBRARY_PATH environment variables are consistent, and that the startup scripts are not over-riding them in some way. + + + + + + +Supporting multiple window managers + +The main dialogue box for &tdm; includes a Session Type: drop-down box, which allows you to select a window manager to use for your session. This chapter describes the changes that you must make to your configuration files in order to support this feature. + +The options that appear in the Session Type: drop-down box are configured by entries in the TDM section of &tdmrc;. + +When you log in using &tdm;, the shell script Xsession is executed. The session type that you select is passed as a command-line argument. (Xsession can be found in /etc/X11/xdm/ for Redhat and Mandrake, and in /usr/X11R6/lib/X11/xdm/ for S.u.S.E.). Whilst debugging, you might find it helpful to add this line to Xsession: + +echo "$0 || $1 || $2" +> $HOME/.Xsession_args + +How you proceed now depends upon how your system usually starts up window managers. Here are two different approaches, with examples of the changes that you must make: + + + +The window manager is started by commands within Xsession. In this case, you can add a case statement to start the appropriate window manager. Linux Mandrake uses this approach; here is an extract from Xsession: + +# now, we see if xdm/gdm/tdm has asked for a specific environment +case $# in +1) + case $1 in + kde) + source /opt/kde2/bin/kde1 + exec starttde + ;; + kde2) + source /opt/kde2/bin/kde2 + exec starttde + ;; + failsafe) + exec xterm -geometry 80x24-0-0 + ;; + default) + ;; + *) + exec /bin/sh -c "$(/usr/sbin/chksession -x=$1)" + ;; + esac +esac + + + +The window manager is started by another script that is invoked by Xsession. In this case you must ensure that the parameter passed to Xsession is passed on to that other script. For example, if the window manager is started like this: + +exec + +you would need to change it to: + +exec + +Having made this change, you must trace your way through the startup to find the place where the window manager is started. One approach uses xinitrc to start the window manager; this allows a system-wide file /etc/X11/xinit/xinitrc or a user-specific file $HOME/.xinitrc to be used. If you edit $HOME/.xinitrc, you may want to save a copy in /etc/skel, so that it will be automatically generated in every user account you create from now on. Here is an example xinitrc for a system using this approach: + +#!/bin/bash +# +# .xsession/.xinitrc +# +# choose a window manager +# + +defaultwm=kde +#set the window manager to $1 if it was supplied +windowmgr=${1:-$defaultwm} + +#start the respective window managers +case ${windowmgr} in + kde|kwm|kdestart) + WINDOWMANAGER=starttde + ;; + fvwm|fvwm2) + WINDOWMANAGER=fvwm2 + ;; + + fvwm95) + WINDOWMANAGER=fvwm95 + ;; + + *) WINDOWMANAGER=windowmgr # default for unknown wm's + +esac + +# +# load resources +# + +if [ -f /usr/X11R6/lib/X11/Xmodmap ]; then + xmodmap /usr/X11R6/lib/X11/Xmodmap +fi + +if [ -f ~/.Xmodmap ]; then + xmodmap ~/.Xmodmap +fi + +if [ -f ~/.Xdefaults ]; then + xrdb -merge ~/.Xdefaults +fi + +if [ -f ~/.Xresources ]; then + xrdb -merge ~/.Xresources +fi +# +# finally start the window manager +# +exec $WINDOWMANAGER + + + + + + + + + +Using &tdm; for Remote Logins (&XDMCP;) + +&XDMCP; is the Open Group standard, the X Display Manager Control Protocol. This is used to set up connections between remote systems over the network. + +&XDMCP; is useful in multiuser situations where there are users with workstations and a more powerful server that can provide the resources to run multiple X sessions. For example, &XDMCP; is a good way to reuse old computers - a Pentium or even 486 computer with 16 Mb RAM is sufficient to run X itself, and using XDMCP such a computer can run a full modern &kde; session from a server. For the server part, once a single &kde; (or other environment) session is running, running another one requires very few extra resources. + +However, allowing another method of login to your machine obviously has security implications. You should run this service only if you need to allow remote X Servers to start login sessions on your system. Users with a single &UNIX; computer should not need to run this. + + + + + + +Other sources of information + +Since &tdm; is descended from &xdm;, the xdm man page may provide useful background information. For X-related problems try the man pages X and startx. If you have questions about &tdm; that are not answered by this handbook, take advantage of the fact the &tdm; is provided under the terms of the GNU General Public Licence: look at the source code. + + + + +Credits and Licence + +&tdm; is derived from, and includes code from, &xdm; (C) Keith Packard, MIT X Consortium. + +&tdm; 0.1 was written by Matthias Ettrich. Later versions till &kde; 2.0.x were written by Steffen Hansen. Some new features for &kde; 2.1.x and a major rewrite for &kde; 2.2.x made by Oswald Buddenhagen. + +Other parts of the &tdm; code are copyright by the authors, and licensed under the terms of the GNU GPL. Anyone is allowed to change &tdm; and redistribute the result as long as the names of the authors are mentioned. + +&tdm; requires the Qt library, which is copyright Troll Tech AS. + +Documentation contributors: + +Documentation written by Steffen Hansen stefh@dit.ou.dk + +Documentation extended by Gregor Zumsteinzumstein@ssd.ethz.ch. Last update August 9, 1998 + +Documentation revised for KDE 2 by Neal Crooknac@forth.org. Last update August 6, 2000 + +Documentation extended and revised for KDE 2.2 by Oswald Buddenhagenossi@kde.org. Last update August, 2001 + + + +Documentation copyright Steffen Hansen, Gregor Zumstein, Neal Crook and Oswald Buddenhagen. This document also includes large parts of the &xdm; man page, which is (C) Keith Packard. + +Conversion to British English: John Knight anarchist_tomato@herzeleid.net +&underFDL; &underGPL; + + +Building and Installing tdm + +&tdm; is part of the KDE project. The various component parts of the KDE project are broken into sections, called packages. &tdm; is part of the package called tdebase. You can get KDE source code from various Linux and BSD distribution CDs, or by download from www.kde.org or its mirrors. If you have an out-of-date source code tree, you can use one of the KDE cvsup servers to bring it up-to-date whilst using minimal network bandwidth. + +Before building tdebase, you must have built and installed (in this order) version 2 of the qt library and the KDE packages tdesupport (optionally) and tdelibs. + +In order to build any of the above, you must already have the X Window System installed, together with a C++ compiler. If are you building from CVS you will also need the GNU configuration tools automake and autoconf. + +If the last few paragraphs seemed like a foreign language, then either you have strayed into an Inappropriate Area of this handbook, or you are about to undergo a Great Learning Experience. + +If you managed to satisfy all of the prerequisites, you are unlikely to have any problems with building and installing tdebase. &tdm; is installed in your $TDEDIR/bin folder. + +make will not overwrite your previous &tdm; config files including &tdmrc;. + + + + +Glossary + + +greeter +The greeter is the login dialogue, &ie; the part of &tdm; which the user sees. + + + + +entropy +... + + + + + + + diff --git a/tde-i18n-en_GB/docs/tdebase/tdm/tdmrc-ref.docbook b/tde-i18n-en_GB/docs/tdebase/tdm/tdmrc-ref.docbook new file mode 100644 index 00000000000..a778a4b0d2f --- /dev/null +++ b/tde-i18n-en_GB/docs/tdebase/tdm/tdmrc-ref.docbook @@ -0,0 +1,3221 @@ + + + +The Files &tdm; Uses for Configuration + +This chapter documents the files that control &tdm;'s behaviour. Some of this can be also controlled from the &kcontrol; module, but not all. + + +&tdmrc; - The &tdm; master configuration file + +The basic format of the file is INI-like. Options are key/value pairs, placed in sections. Everything in the file is case sensitive. Syntactic errors and unrecognised key/section identifiers cause &tdm; to issue non-fatal error messages. + +Lines beginning with # are comments; empty lines are ignored as well. + +Sections are denoted by [Name of Section]. + +You can configure every X-display individually. +Every display has a display name, which consists of a host name (which is empty for local displays specified in the Xservers file), a colon and a display number. Additionally, a display belongs to a display class (which can be ignored in most cases). + +Sections with display-specific settings have the formal syntax [X- host [ : number [ _ class ] ] - sub-section ] +All sections with the same sub-section make up a section class. + +You can use the * wildcard for host, number and class. You may omit trailing components; they are assumed to be * then. The host part may be a domain specification like .inf.tu-dresden.de. + +From which section a setting is actually taken is determined by these rules: + + + +An exact match takes precedence over a partial match (for the host part), which in turn takes precedence over a wildcard. + + + +Precedence decreases from left to right for equally exact matches. + + + + +Example: display name myhost:0, class dpy + + +[X-myhost:0_dpy] precedes + + +[X-myhost:0_*] (same as [X-myhost:0]) precedes + + +[X-myhost:*_dpy] precedes + + +[X-myhost:*_*] (same as [X-myhost]) precedes + + +[X-*:0_dpy] precedes + + +[X-*:0_*] (same as [X-*:0]) precedes + + +[X-*:*_*] (same as [X-*]). + + +These sections do not match this display: +[X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] + + + + + + + +Common sections are [X-*] (all displays), [X-:*] (all local displays) and [X-:0] (the first local display). + +The format for all keys is  = value. Keys are only valid in the section class they are defined for. Some keys do not apply to particular displays, in which case they are ignored. + +If a setting is not found in any matching section, the default is used. + +A pristine &tdmrc; is very thoroughly commented. All comments will be lost if you change this file with the kcontrol frontend. + + + +The [General] section of &tdmrc; + +This section contains global options that do not fit into any specific section. + + + + + + +This option exists solely for the purpose of clean automatic upgrades. Do not change it, you may interfere with future upgrades and this could result in &tdm; failing to run. + + + + + + +If the value starts with a slash (/), it specifies a file to read &X-Server; definitions from; otherwise, it is an &X-Server; definition by itself. See for the details. The default is an &X-Server; definition that is usually reasonable for the system on which &tdm; was built. + + + + + + +List of Virtual Terminals to allocate to &X-Server;s. For negative numbers the absolute value is used, and the VT will be allocated only if the kernel says it is free. If &tdm; exhausts this list, it will allocate free VTs greater than the absolute value of the last entry in this list. +Empty by default. + + + + + + +The filename specified will be created to contain an ASCII representation of the process ID of the main &tdm; process; the PID will not be stored if the filename is empty. +Empty by default. + + + + + + +This option controls whether &tdm; uses file locking to keep multiple display managers from running onto each other. +The default is true. + + + + + + +This names a directory under which &tdm; stores &X-Server; authorisation files while initialising the session. &tdm; expects the system to clean up this directory from stale files on reboot. The authorisation file to be used for a particular display can be specified with the option in [X-*-Core]. +The default is /var/run/xauth. + + + + + + +This boolean controls whether &tdm; automatically re-reads its configuration files if it finds them to have changed. +The default is true. + + + + + + +Additional environment variables &tdm; should pass on to all programs it runs. LD_LIBRARY_PATH and XCURSOR_THEME are good candidates; otherwise, it should not be necessary very often. +Empty by default. + + + + + + +If the system has no native entropy source like /dev/urandom (see ) and no entropy daemon like EGD (see and ) is running, &tdm; will fall back to its own pseudo-random number generator that will, among other things, successively checksum parts of this file (which, obviously, should change frequently). This option does not exist on Linux and various BSDs. +The default is /dev/mem. + + + + + + +If the system has no native entropy source like /dev/urandom (see ), read random data from a Pseudo-Random Number Generator Daemon, like EGD (http://egd.sourceforge.net) via this UNIX domain socket. This option does not exist on Linux and various BSDs. +Empty by default. + + + + + + +Same as , only use a TCP socket on localhost. + + + + + + +The path to a character device which TDM should read random data from. Empty means to use the system's preferred entropy device if there is one. This option does not exist on OpenBSD, as it uses the arc4_random function instead. +Empty by default. + + + + + + +The directory in which the command FiFos should be created; make it empty to disable them. +The default is /var/run/xdmctl. + + + + + + +The group to which the global command FiFo should belong; can be either a name or a numerical ID. + + + + + + +The directory in which &tdm; should store persistent working data; such data is, for example, the previous user that logged in on a particular display. +The default is /var/lib/tdm. + + + + + + +The directory in which &tdm; should store users' .dmrc files. This is only needed if the home directories are not readable before actually logging in (like with AFS). +Empty by default. + + + + + + + + +The [Xdmcp] section of &tdmrc; + +This section contains options that control &tdm;'s handling of &XDMCP; requests. + + + + + + +Whether &tdm; should listen to incoming &XDMCP; requests. +The default is true. + + + + + + +This indicates the UDP port number which &tdm; uses to listen for incoming &XDMCP; requests. Unless you need to debug the system, leave this with its default value. +The default is 177. + + + + + + +XDM-AUTHENTICATION-1 style &XDMCP; authentication requires a private key to be shared between &tdm; and the terminal. This option specifies the file containing those values. Each entry in the file consists of a display name and the shared key. +Empty by default. + + + + + + +To prevent unauthorised &XDMCP; service and to allow forwarding of &XDMCP; IndirectQuery requests, this file contains a database of hostnames which are either allowed direct access to this machine, or have a list of hosts to which queries should be forwarded to. The format of this file is described in . +The default is ${kde_confdir}/tdm/Xaccess. + + + + + + +Number of seconds to wait for the display to respond after the user has selected a host from the chooser. If the display sends an &XDMCP; IndirectQuery within this time, the request is forwarded to the chosen host; otherwise, it is assumed to be from a new session and the chooser is offered again. +The default is 15. + + + + + + +When computing the display name for &XDMCP; clients, the name resolver will typically create a fully qualified host name for the terminal. As this is sometimes confusing, &tdm; will remove the domain name portion of the host name if it is the same as the domain name of the local host when this option is enabled. +The default is true. + + + + + + +Use the numeric IP address of the incoming connection on multihomed hosts instead of the host name. This is to avoid trying to connect on the wrong interface which might be down at this time. +The default is false. + + + + + + +This specifies a program which is run (as root) when an &XDMCP; DirectQuery or BroadcastQuery is received and this host is configured to offer &XDMCP; display management. The output of this program may be displayed in a chooser window. If no program is specified, the string Willing to manage is sent. +Empty by default. + + + + + + + + +The [Shutdown] section of &tdmrc; + +This section contains global options concerning system shutdown. + + + + + + +The command to run to halt/poweroff the system. The default is something reasonable for the system on which &tdm; was built, like /sbin/shutdown  now. + + + + + + +The command to run to reboot the system. The default is something reasonable for the system &tdm; on which was built, like /sbin/shutdown  now. + + + + + + +Whether it is allowed to shut down the system via the global command FiFo. +The default is false. + + + + + + +Whether it is allowed to abort active sessions when shutting down the system via the global command FiFo. This will have no effect unless is enabled. +The default is true. + + + + + + +Instructs &tdm; to offer LiLo boot options in the shutdown dialogue. Only available on Linux i386 & x86-64. +The default is false. + + + + + + +The location of the LiLo binary. Only available on Linux i386 & x86-64. +The default is /sbin/lilo. + + + + + + +The location of the map file LiLo should use. Only available on Linux i386 & x86-64. +The default is /boot/map. + + + + + + + + +The [X-*-Core] section class of &tdmrc; + +This section class contains options concerning the configuration of the &tdm; backend (core). + + + + + + +See . +The default is 15. + + + + + + +See . +The default is 120. + + + + + + +These options control the behaviour of &tdm; when attempting to open a connection to an &X-Server;. is the length of the pause (in seconds) between successive attempts, is the number of attempts to make and is the amount of time to spend on a connection attempt. After attempts have been made, or if seconds elapse in any particular connection attempt, the start attempt is considered failed. +The default is 5. + + + + + + +How many times &tdm; should attempt to start a foreign display listed in the Xservers file before giving up and disabling it. Local displays are attempted only once, and &XDMCP; displays are retried indefinitely by the client (unless the option was given to the &X-Server;). +The default is 4. + + + + + + +How many times &tdm; should attempt to start up a local &X-Server;. Starting up includes executing it and waiting for it to come up. +The default is 1. + + + + + + +How many seconds &tdm; should wait for a local &X-Server; to come up. +The default is 15. + + + + + + +See . +The default is 5. + + + + + + +To discover when remote displays disappear, &tdm; regularly pings them. specifies the time (in minutes) between the pings and specifies the maximum amount of time (in minutes) to wait for the terminal to respond to the request. If the terminal does not respond, the session is declared dead and terminated. If you frequently use X terminals which can become isolated from the managing host, you may wish to increase the timeout. The only worry is that sessions will continue to exist after the terminal has been accidentally disabled. +The default is 5. + + + + + + +Whether &tdm; should restart the local &X-Server; after session exit instead of resetting it. Use this if the &X-Server; leaks memory or crashes the system on reset attempts. +The default is false. + + + + + + +The signal number to use to reset the local &X-Server;. +The default is 1 (SIGHUP). + + + + + + +The signal number to use to terminate the local &X-Server;. +The default is 15 (SIGTERM). + + + + + + +Controls whether &tdm; generates and uses authorisation for local &X-Server; connections. For &XDMCP; displays the authorisation requested by the display is used; foreign non-&XDMCP; displays do not support authorisation at all. +The default is true. + + + + + + +If is true, use the authorisation mechanisms listed herein. The MIT-MAGIC-COOKIE-1 authorisation is always available; XDM-AUTHORIZATION-1, SUN-DES-1 and MIT-KERBEROS-5 might be available as well, depending on the build configuration. +The default is DEF_AUTH_NAME. + + + + + + +Some old &X-Server;s re-read the authorisation file at &X-Server; reset time, instead of when checking the initial connection. As &tdm; generates the authorisation information just before connecting to the display, an old &X-Server; would not get up-to-date authorisation information. This option causes &tdm; to send SIGHUP to the &X-Server; after setting up the file, causing an additional &X-Server; reset to occur, during which time the new authorisation information will be read. +The default is false. + + + + + + +This file is used to communicate the authorisation data from &tdm; to the &X-Server;, using the &X-Server; command line option. It should be kept in a directory which is not world-writable as it could easily be removed, disabling the authorisation mechanism in the &X-Server;. If not specified, a random name is generated from and the name of the display. +Empty by default. + + + + + + +This option specifies the name of the file to be loaded by xrdb as the resource database onto the root window of screen 0 of the display. KDE programs generally do not use X-resources, so this option is only needed if the program needs some X-resources. +Empty by default. + + + + + + +The xrdb program to use to read the X-resources file specified in . +The default is ${x_bindir}/xrdb. + + + + + + +This specifies a program which is run (as root) before offering the greeter window. This may be used to change the appearance of the screen around the greeter window or to put up other windows (e.g., you may want to run xconsole here). The conventional name for a file used here is Xsetup. See . +Empty by default. + + + + + + +This specifies a program which is run (as root) after the user authentication process succeeds. The conventional name for a file used here is Xstartup. See . +Empty by default. + + + + + + +This specifies a program which is run (as root) after the session terminates. The conventional name for a file used here is Xreset. See . +Empty by default. + + + + + + +This specifies the session program to be executed (as the user owning the session). The conventional name for a file used here is Xsession. See . +The default is ${x_bindir}/xterm -ls -T. + + + + + + +If the program fails to execute, &tdm; will fall back to this program. This program is executed with no arguments, but executes using the same environment variables as the session would have had (see ). +The default is ${x_bindir}/xterm. + + + + + + +The PATH environment variable for non-root s. The default depends on the system &tdm; was built on. + + + + + + +The PATH environment variable for all programs but non-root s. Note that it is good practice not to include . (the current directory) into this entry. The default depends on the system &tdm; was built on. + + + + + + +The SHELL environment variable for all programs but the . +The default is /bin/sh. + + + + + + +When &tdm; is unable to write to the usual user authorisation file ($HOME/.Xauthority), it creates a unique file name in this directory and points the environment variable XAUTHORITY at the created file. +The default is /tmp. + + + + + + +If enabled, &tdm; will automatically restart a session after an &X-Server; crash (or if it is killed by Alt-Ctrl-BackSpace). Note that enabling this feature opens a security hole: a secured display lock can be circumvented (unless &kde;'s built-in screen locker is used). +The default is false. + + + + + + +If disabled, do not allow root (and any other user with UID = 0) to log in directly. +The default is true. + + + + + + +If disabled, only users that have passwords assigned can log in. +The default is true. + + + + + + +Who is allowed to shut down the system. This applies both to the greeter and to the command FiFo. + + +None +no Shutdown... menu entry is shown at all + + +Root +the root password must be entered to shut down + + +All +everybody can shut down the machine + + +The default is All. + + + + + + +Who is allowed to abort active sessions when shutting down. + + +None +no forced shutdown is allowed at all + + +Root +the root password must be entered to shut down forcibly + + +All +everybody can shut down the machine forcibly + + +The default is All. + + + + + + +The default choice for the shutdown condition/timing. + + +Schedule +shut down after all active sessions exit (possibly at once) + + +TryNow +shut down, if no active sessions are open; otherwise, do nothing + + +ForceNow +shut down unconditionally + + +The default is Schedule. + + + + + + +How to offer shutdown scheduling options: + + +Never +not at all + + +Optional +as a button in the simple shutdown dialogues + + +Always +instead of the simple shutdown dialogues + + +The default is Never. + + + + + + +Enable password-less logins on this display. Use with extreme care! +The default is false. + + + + + + +The users that do not need to provide a password to log in. Items which are prefixed with @ represent all users in the user group named by that item. * means all users but root (and any other user with UID = 0). Never list root. +Empty by default. + + + + + + +Enable automatic login. Use with extreme care! +The default is false. + + + + + + +The user to log in automatically. Never specify root! +Empty by default. + + + + + + +The password for the user to log in automatically. This is not required unless the user is logged into a NIS or Kerberos domain. If you use this option, you should chmod  tdmrc for obvious reasons. +Empty by default. + + + + + + +A list of directories containing session type definitions. +The default is ${kde_datadir}/tdm/sessions. + + + + + + +The file (relative to the user's home directory) to redirect the session output to. One occurrence of %s in this string will be substituted with the display name. Use %% to obtain a literal %. +The default is .xsession-errors. + + + + + + + + +The [X-*-Greeter] section class of &tdmrc; + +This section class contains options concerning the configuration of the &tdm; frontend (greeter). + + + + + + +Specify the widget style for the greeter. Empty means to use the built-in default which currently is Keramik. +Empty by default. + + + + + + +Specify the widget colour scheme for the greeter. Empty means to use the built-in default which currently is yellowish grey with some light blue and yellow elements. +Empty by default. + + + + + + +What should be shown in the greeter righthand of the input lines (if is disabled) or above them (if is enabled): + + +None +nothing + + +Logo +the image specified by + + +Clock +a neat analogue clock + + +The default is Clock. + + + + + + +The image to show in the greeter if is Logo. +Empty by default. + + + + + + +The relative coordinates (percentages of the screen size; X,Y) at which the centre of the greeter is put. &tdm; aligns the greeter to the edges of the screen it would cross otherwise. +The default is 50,50. + + + + + + +The screen the greeter should be displayed on in multi-headed and Xinerama setups. The numbering starts with 0. For Xinerama, it corresponds to the listing order in the active ServerLayout section of XF86Config; -1 means to use the upper-left screen, -2 means to use the upper-right screen. + + + + + + +The headline in the greeter. An empty greeting means none at all. The following character pairs are replaced by their value: + +%d +name of the current display + + +%h +local host name, possibly with the domain name + + +%n +local node name, most probably the host name without the domain name + + +%s +operating system + + +%r +operating system version + + +%m +machine (hardware) type + + +%% +a single % + + + +The default is Welcome to %s at %n. + + + + + + +The font for the greeter headline. +The default is charter,24,bold. + + + + + + +The normal font used in the greeter. +The default is helvetica,12. + + + + + + +The font used for the Login Failed message. +The default is helvetica,12,bold. + + + + + + +Whether the fonts used in the greeter should be antialiased. +The default is false. + + + + + + +What to do with the Num Lock modifier for the time the greeter is running: + + +Off +turn off + + +On +turn on + + +Keep +do not change the state + + +The default is Keep. + + + + + + +Language and locale to use in the greeter, encoded like $LC_LANG. +The default is en_US. + + + + + + +Enable autocompletion in the username line edit. +The default is false. + + + + + + +Show a user list with unix login names, real names and images in the greeter. +The default is true. + + + + + + +This option controls which users will be shown in the user view () and/or offered for autocompletion (). If it is Selected, contains the final list of users. If it is NotHidden, the initial user list are all users found on the system. Users contained in are removed from the list, just like all users with a UID greater than specified in and users with a non-zero UID less than specified in . Items in and which are prefixed with @ represent all users in the user group named by that item. Finally, the user list will be sorted alphabetically, if is enabled. +The default is NotHidden. + + + + + + +See . +Empty by default. + + + + + + +See . +Empty by default. + + + + + + +See . + + + + + + +See . +The default is 65535. + + + + + + +See . +The default is true. + + + + + + +If is enabled, this specifies where &tdm; gets the images from: + + +AdminOnly +from <>/$USER.face[.icon] + + +PreferAdmin +prefer <>, fallback on $HOME + + +PreferUser +... and the other way round + + +UserOnly +from the user's $HOME/.face[.icon] + + + +The images can be in any format Qt recognises, but the filename must match &tdm;'s expectations: .face.icon should be a 48x48 icon, while .face should be a 300x300 image. Currently the big image is used only as a fallback and is scaled down, but in the future it might be displayed full-size in the logo area or a tooltip. +The default is AdminOnly. + + + + + + +See . +The default is ${kde_datadir}/tdm/faces. + + + + + + +Specify, if/which user should be preselected for log in: + + +None +do not preselect any user + + +Previous +the user which successfully logged in last time + + +Default +the user specified in the option + + + +If is enabled and a user was preselected, the cursor is placed in the password input field automatically. +Enabling user preselection can be considered a security hole, as it presents a valid login name to a potential attacker, so he only needs to guess the password. On the other hand, one could set to a fake login name. + +The default is None. + + + + + + +See . +Empty by default. + + + + + + +See . +The default is false. + + + + + + +The password input fields cloak the typed in text. Specify, how to do it: + + +OneStar +* is shown for every typed letter + + +ThreeStars +*** is shown for every typed letter + + +NoEcho +nothing is shown at all, the cursor does not move + + +The default is OneStar. + + + + + + +If enabled, &tdm; will automatically start the krootimage program to set up the background; otherwise, the program is responsible for the background. +The default is true. + + + + + + +The configuration file to be used by krootimage. It contains a section named [Desktop0] like kdesktoprc does. Its options are not described herein; guess their meanings or use the control centre. +The default is ${kde_confdir}/tdm/backgroundrc. + + + + + + +To improve security, the greeter grabs the &X-Server; and then the keyboard when it starts up. This option specifies if the &X-Server; grab should be held for the duration of the name/password reading. When disabled, the &X-Server; is ungrabbed after the keyboard grab succeeds; otherwise, the &X-Server; is grabbed until just before the session begins. +Enabling this option disables and . + +The default is false. + + + + + + +This option specifies the maximum time &tdm; will wait for the grabs to succeed. A grab may fail if some other X-client has the &X-Server; or the keyboard grabbed, or possibly if the network latencies are very high. You should be cautious when raising the timeout, as a user can be spoofed by a look-alike window on the display. If a grab fails, &tdm; kills and restarts the &X-Server; (if possible) and the session. +The default is 3. + + + + + + +Warn, if a display has no X-authorisation. This will be the case if + the authorisation file for a local &X-Server; could not be created, + a remote display from &XDMCP; did not request any authorisation or + the display is a foreign display from the Xservers file. + + +The default is true. + + + + + + +Specify whether the greeter of local displays should start up in host chooser (remote) or login (local) mode and whether it is allowed to switch to the other mode. + + +LocalOnly +only local login possible + + +DefaultLocal +start up in local mode, but allow switching to remote mode + + +DefaultRemote +... and the other way round + + +RemoteOnly +only choice of remote host possible + + +The default is LocalOnly. + + + + + + +A list of hosts to be automatically added to the remote login menu. The special name * means broadcast. Has no effect if is LocalOnly. +The default is *. + + + + + + +Use this number as a random seed when forging saved session types, etc. of unknown users. This is used to avoid telling an attacker about existing users by reverse conclusion. This value should be random but constant across the login domain. + + + + + + +Enable &tdm;'s built-in xconsole. Note that this can be enabled for only one display at a time. This option is available only if &tdm; was configured with . +The default is false. + + + + + + +The data source for &tdm;'s built-in xconsole. If empty, a console log redirection is requested from /dev/console. Has no effect if is disabled. +Empty by default. + + + + + + +Specify conversation plugins for the login dialogue; the first in the list is selected initially. Each plugin can be specified as a base name (which expands to $kde_modulesdir/kgreet_base) or as a full pathname. Conversation plugins are modules for the greeter which obtain authentication data from the user. Currently only the classic plugin is shipped with &kde;; it presents the well-known username and password form. +The default is classic. + + + + + + +Same as , but for the shutdown dialogue. +The default is classic. + + + + + + +A list of options of the form Key=Value. The conversation plugins can query these settings; it is up to them what possible keys are. +Empty by default. + + + + + + +Show the Console Login action in the greeter. For this to work, a console must be configured for this particular display, see . +The default is true. + + + + + + +Show the Restart X Server/Close Connection action in the greeter. +The default is true. + + + + + + +A program to run while the greeter is visible. It is supposed to preload as much as possible of the session that is going to be started (most probably). +Empty by default. + + + + + + + + + + + +Specifying permanent &X-Server;s + +Each specification indicates a display which should constantly be managed and which is not using &XDMCP;. This method is typically used only for local &X-Server;s that are started by &tdm;, but &tdm; can manage externally started (foreign) &X-Server;s as well, may they run on the local machine or rather remotely. + +The formal syntax of a specification is +display name [display class] local[@tty] [reserve] server command + for own &X-Server;s and +display name [display class] foreign + for foreign &X-Server;s. + +The display name must be something that can be passed in the option to an X program. This string is used to generate the display-specific section names, so be careful to match the names. The display name of &XDMCP; displays is derived from the display's address by reverse host name resolution. For configuration purposes, the localhost prefix from locally running &XDMCP; displays is not stripped to make them distinguishable from local &X-Server;s started by &tdm;. + +The display class portion is also used in the display-specific sections. This is useful if you have a large collection of similar displays (such as a corral of X terminals) and would like to set options for groups of them. When using &XDMCP;, the display is required to specify the display class, so the manual for your particular X terminal should document the display class string for your device. If it does not, you can run &tdm; in debug mode and grep the log for class. + +The tty specifies which text console an &X-Server; is covering, so &tdm; knows which console it should monitor for activity after switching to Console login to find out when the console session ends. Note that this concept (originating from Solaris) is not perfectly suited for Linux, as there &X-Server;s run on separate virtual terminals and consequently do not actually cover consoles (gettys). + +The reserve keyword instructs &tdm; to start the display not when &tdm; starts up, but when it is explicitly requested via the command FiFo. If reserve displays are specified, the &kde; menu will have a Start New Session item near the bottom; use that to activate a reserve display with a new login session. The monitor will switch to the new display, and you will have a minute to login. If there are no more reserve displays available, selecting the menu item will have no effect. + +The server command specifies the complete &X-Server; command line, including a display number for secondary displays. When &tdm; starts a session, it sets up authorisation data for the &X-Server;. For local servers, &tdm; passes  filename on the &X-Server;'s command line to point it at its authorisation data. For &XDMCP; displays, &tdm; passes the authorisation data to the &X-Server; via the Accept &XDMCP; message. + + + + +&XDMCP; access control + +The file specified by the option provides information which &tdm; uses to control access from displays requesting service via &XDMCP;. The file contains four types of entries: entries which control the response to Direct and Broadcast queries, entries which control the response to Indirect queries, macro definitions for Indirect entries and entries which control on which network interfaces &tdm; listens for &XDMCP; queries. Blank lines are ignored, # is treated as a comment delimiter causing the rest of that line to be ignored and \ causes an immediately following newline to be ignored, allowing indirect host lists to span multiple lines. + +The format of the Direct entries is simple, either a host name or a pattern, which is compared against the host name of the display device. Patterns are distinguished from host names by the inclusion of one or more meta characters; * matches any sequence of 0 or more characters, and ? matches any single character. If the entry is a host name, all comparisons are done using network addresses, so any name which converts to the correct network address may be used. Note that only the first network address returned for a host name is used. For patterns, only canonical host names are used in the comparison, so ensure that you do not attempt to match aliases. Host names from &XDMCP; queries always contain the local domain name even if the reverse lookup returns a short name, so you can use patterns for the local domain. Preceding the entry with a ! character causes hosts which match that entry to be excluded. To only respond to Direct queries for a host or pattern, it can be followed by the optional NOBROADCAST keyword. This can be used to prevent a &tdm; server from appearing on menus based on Broadcast queries. + +An Indirect entry also contains a host name or pattern, but follows it with a list of host names or macros to which the queries should be forwarded. Indirect entries can be excluding as well, in which case a (valid) dummy host name must be supplied to make the entry distinguishable from a Direct entry. If compiled with IPv6 support, multicast address groups may also be included in the list of addresses the queries are forwarded to. If the indirect host list contains the keyword CHOOSER, Indirect queries are not forwarded, but instead a host chooser dialogue is displayed by &tdm;. The chooser will send a Direct query to each of the remaining host names in the list and offer a menu of all the hosts that respond. The host list may contain the keyword BROADCAST, to make the chooser send a Broadcast query as well; note that on some operating systems, UDP packets cannot be broadcast, so this feature will not work. + +When checking access for a particular display host, each entry is scanned in turn and the first matching entry determines the response. Direct and Broadcast entries are ignored when scanning for an Indirect entry and vice-versa. + +A macro definition contains a macro name and a list of host names and other macros that the macro expands to. To distinguish macros from hostnames, macro names start with a % character. + +The last entry type is the LISTEN directive. The formal syntax is + LISTEN [interface [multicast list]] + If one or more LISTEN lines are specified, &tdm; listens for &XDMCP; requests only on the specified interfaces. interface may be a hostname or IP address representing a network interface on this machine, or the wildcard * to represent all available network interfaces. If multicast group addresses are listed on a LISTEN line, &tdm; joins the multicast groups on the given interface. For IPv6 multicasts, the IANA has assigned ff0X:0:0:0:0:0:0:12b as the permanently assigned range of multicast addresses for &XDMCP;. The X in the prefix may be replaced by any valid scope identifier, such as 1 for Node-Local, 2 for Link-Local, 5 for Site-Local, and so on (see IETF RFC 2373 or its replacement for further details and scope definitions). &tdm; defaults to listening on the Link-Local scope address ff02:0:0:0:0:0:0:12b to most closely match the IPv4 subnet broadcast behavior. If no LISTEN lines are given, &tdm; listens on all interfaces and joins the default &XDMCP; IPv6 multicast group (when compiled with IPv6 support). To disable listening for &XDMCP; requests altogether, a LISTEN line with no addresses may be specified, but using the [Xdmcp] option is preferred. + + + + +Supplementary programs + +The following programs are run by &tdm; at various stages of a session. They typically are shell scripts. + +The Setup, Startup and Reset programs are run as root, so they should be careful about security. Their first argument is auto if the session results from an automatic login; otherwise, no arguments are passed to them. + + +Setup program + +The Xsetup program is run after the &X-Server; is started or reset, but before the greeter is offered. This is the place to change the root background (if is disabled) or bring up other windows that should appear on the screen along with the greeter. + +In addition to any specified by , the following environment variables are passed: + + + DISPLAY + the associated display name + + + PATH + the value of + + + SHELL + the value of + + + XAUTHORITY + may be set to an authority file + + + DM_CONTROL + the value of + + + +Note that since &tdm; grabs the keyboard, any other windows will not be able to receive keyboard input. They will be able to interact with the mouse, however; beware of potential security holes here. If is set, Xsetup will not be able to connect to the display at all. Resources for this program can be put into the file named by . + + + + +Startup program + +The Xstartup program is run as root when the user logs in. This is the place to put commands which add entries to utmp (the sessreg program may be useful here), mount users' home directories from file servers, or abort the session if some requirements are not met (but note that on modern systems, many of these tasks are already taken care of by PAM modules). + +In addition to any specified by , the following environment variables are passed: + + + DISPLAY + the associated display name + + + HOME + the initial working directory of the user + + + LOGNAME + the username + + + USER + the username + + + PATH + the value of + + + SHELL + the value of + + + XAUTHORITY + may be set to an authority file + + + DM_CONTROL + the value of + + + +&tdm; waits until this program exits before starting the user session. If the exit value of this program is non-zero, &tdm; discontinues the session and starts another authentication cycle. + + + + +Session program + +The Xsession program is the command which is run as the user's session. It is run with the permissions of the authorised user. One of the keywords failsafe, default or custom, or a string to eval by a Bourne-compatible shell is passed as the first argument. + +In addition to any specified by , the following environment variables are passed: + + + DISPLAY + the associated display name + + + HOME + the initial working directory of the user + + + LOGNAME + the username + + + USER + the username + + + PATH + the value of (or for root user sessions) + + + + SHELL + the user's default shell + + + XAUTHORITY + may be set to a non-standard authority file + + + KRBTKFILE + may be set to a Kerberos4 credentials cache name + + + + KRB5CCNAME + may be set to a Kerberos5 credentials cache name + + + + DM_CONTROL + the value of + + + XDM_MANAGED + will contain a comma-separated list of parameters the session might find interesting, like the location of the command FiFo and its capabilities, and which conversation plugin was used for the login + + + + DESKTOP_SESSION + the name of the session the user has chosen to run + + + + + + + +Reset program + +Symmetrical with Xstartup, the Xreset program is run after the user session has terminated. Run as root, it should contain commands that undo the effects of commands in Xstartup, removing entries from utmp or unmounting directories from file servers. + +The environment variables that were passed to Xstartup are also passed to Xreset. + + + + + + -- cgit v1.2.1