From e198274bd57f0df7acf739d62cc17d9aa2960593 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 22 Jan 2012 00:25:42 -0600 Subject: Part 1 of 2 of kdm rename --- tde-i18n-en_GB/configure | 8 +- tde-i18n-en_GB/configure.in | 4 +- tde-i18n-en_GB/docs/tdebase/Makefile.in | 2 +- tde-i18n-en_GB/docs/tdebase/faq/configkde.docbook | 10 +- tde-i18n-en_GB/docs/tdebase/faq/install.docbook | 4 +- tde-i18n-en_GB/docs/tdebase/faq/notrelated.docbook | 2 +- tde-i18n-en_GB/docs/tdebase/kcontrol/Makefile.in | 2 +- .../tdebase/kcontrol/kcmsmserver/index.docbook | 2 +- .../docs/tdebase/kcontrol/kdm/Makefile.am | 2 +- .../docs/tdebase/kcontrol/kdm/Makefile.in | 44 +-- .../docs/tdebase/kcontrol/kdm/index.docbook | 64 ++-- tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am | 2 +- tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in | 54 +-- tde-i18n-en_GB/docs/tdebase/kdm/index.docbook | 216 ++++++------ tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook | 198 +++++------ .../docs/tdebase/khelpcenter/faq/configkde.docbook | 10 +- .../docs/tdebase/khelpcenter/faq/install.docbook | 4 +- .../tdebase/khelpcenter/faq/notrelated.docbook | 2 +- .../tdebase/khelpcenter/quickstart/index.docbook | 2 +- .../userguide/first-impressions.docbook | 2 +- .../khelpcenter/userguide/installation.docbook | 4 +- .../khelpcenter/userguide/tdebase-apps.docbook | 2 +- .../docs/tdebase/ksplashml/index.docbook | 2 +- .../docs/tdebase/quickstart/index.docbook | 2 +- tde-i18n-en_GB/docs/tdebase/tdesu/index.docbook | 4 +- .../tdebase/userguide/first-impressions.docbook | 2 +- .../docs/tdebase/userguide/installation.docbook | 4 +- tde-i18n-en_GB/messages/tdebase/Makefile.in | 26 +- tde-i18n-en_GB/messages/tdebase/kcmfonts.po | 2 +- tde-i18n-en_GB/messages/tdebase/kcmsmserver.po | 4 +- tde-i18n-en_GB/messages/tdebase/kdmconfig.po | 368 ++++++++++----------- tde-i18n-en_GB/messages/tdebase/kdmgreet.po | 132 ++++---- 32 files changed, 593 insertions(+), 593 deletions(-) (limited to 'tde-i18n-en_GB') diff --git a/tde-i18n-en_GB/configure b/tde-i18n-en_GB/configure index cc43384b3b4..4923ea2a168 100755 --- a/tde-i18n-en_GB/configure +++ b/tde-i18n-en_GB/configure @@ -4201,7 +4201,7 @@ ac_config_files="$ac_config_files docs/tdebase/kcontrol/kcmstyle/Makefile" ac_config_files="$ac_config_files docs/tdebase/kcontrol/kcmtaskbar/Makefile" -ac_config_files="$ac_config_files docs/tdebase/kcontrol/kdm/Makefile" +ac_config_files="$ac_config_files docs/tdebase/kcontrol/tdm/Makefile" ac_config_files="$ac_config_files docs/tdebase/kcontrol/keyboard/Makefile" @@ -4243,7 +4243,7 @@ ac_config_files="$ac_config_files docs/tdebase/tdeprint/Makefile" ac_config_files="$ac_config_files docs/tdebase/tdesu/Makefile" -ac_config_files="$ac_config_files docs/tdebase/kdm/Makefile" +ac_config_files="$ac_config_files docs/tdebase/tdm/Makefile" ac_config_files="$ac_config_files docs/tdebase/kfind/Makefile" @@ -5030,7 +5030,7 @@ do "docs/tdebase/kcontrol/kcmsmserver/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/kcmsmserver/Makefile" ;; "docs/tdebase/kcontrol/kcmstyle/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/kcmstyle/Makefile" ;; "docs/tdebase/kcontrol/kcmtaskbar/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/kcmtaskbar/Makefile" ;; - "docs/tdebase/kcontrol/kdm/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/kdm/Makefile" ;; + "docs/tdebase/kcontrol/tdm/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/tdm/Makefile" ;; "docs/tdebase/kcontrol/keyboard/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/keyboard/Makefile" ;; "docs/tdebase/kcontrol/keys/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/keys/Makefile" ;; "docs/tdebase/kcontrol/khtml/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kcontrol/khtml/Makefile" ;; @@ -5051,7 +5051,7 @@ do "docs/tdebase/kdebugdialog/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kdebugdialog/Makefile" ;; "docs/tdebase/tdeprint/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/tdeprint/Makefile" ;; "docs/tdebase/tdesu/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/tdesu/Makefile" ;; - "docs/tdebase/kdm/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kdm/Makefile" ;; + "docs/tdebase/tdm/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/tdm/Makefile" ;; "docs/tdebase/kfind/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/kfind/Makefile" ;; "docs/tdebase/khelpcenter/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/khelpcenter/Makefile" ;; "docs/tdebase/khelpcenter/faq/Makefile") CONFIG_FILES="$CONFIG_FILES docs/tdebase/khelpcenter/faq/Makefile" ;; diff --git a/tde-i18n-en_GB/configure.in b/tde-i18n-en_GB/configure.in index b48b124ff95..2c91ea85d94 100644 --- a/tde-i18n-en_GB/configure.in +++ b/tde-i18n-en_GB/configure.in @@ -54,7 +54,7 @@ AC_CONFIG_FILES([ docs/tdebase/kcontrol/kcmnotify/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/kcmsmserver/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/kcmstyle/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/kcmtaskbar/Makefile ]) -AC_CONFIG_FILES([ docs/tdebase/kcontrol/kdm/Makefile ]) +AC_CONFIG_FILES([ docs/tdebase/kcontrol/tdm/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/keyboard/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/keys/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kcontrol/khtml/Makefile ]) @@ -75,7 +75,7 @@ AC_CONFIG_FILES([ docs/tdebase/kcontrol/windowmanagement/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kdebugdialog/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/tdeprint/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/tdesu/Makefile ]) -AC_CONFIG_FILES([ docs/tdebase/kdm/Makefile ]) +AC_CONFIG_FILES([ docs/tdebase/tdm/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/kfind/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/khelpcenter/Makefile ]) AC_CONFIG_FILES([ docs/tdebase/khelpcenter/faq/Makefile ]) diff --git a/tde-i18n-en_GB/docs/tdebase/Makefile.in b/tde-i18n-en_GB/docs/tdebase/Makefile.in index f40f0804988..5ab9e63ee1b 100644 --- a/tde-i18n-en_GB/docs/tdebase/Makefile.in +++ b/tde-i18n-en_GB/docs/tdebase/Makefile.in @@ -187,7 +187,7 @@ xdg_menudir = @xdg_menudir@ KDE_LANG = en_GB #>- SUBDIRS = $(AUTODIRS) #>+ 1 -SUBDIRS =. kpager kioslave tdeprint klipper ksplashml glossary quickstart kdebugdialog userguide khelpcenter faq kinfocenter tdesu kate konqueror kcontrol kwrite kfind konsole kxkb kdm visualdict ksysguard kicker kmenuedit +SUBDIRS =. kpager kioslave tdeprint klipper ksplashml glossary quickstart kdebugdialog userguide khelpcenter faq kinfocenter tdesu kate konqueror kcontrol kwrite kfind konsole kxkb tdm visualdict ksysguard kicker kmenuedit KDE_DOCS = AUTO KDE_MANS = AUTO #>- all: all-recursive diff --git a/tde-i18n-en_GB/docs/tdebase/faq/configkde.docbook b/tde-i18n-en_GB/docs/tdebase/faq/configkde.docbook index ec000fb7351..920dc797e07 100644 --- a/tde-i18n-en_GB/docs/tdebase/faq/configkde.docbook +++ b/tde-i18n-en_GB/docs/tdebase/faq/configkde.docbook @@ -107,10 +107,10 @@ > and replace it with x:5:respawn:/opt/kde/bin/kdm -nodaemonbin/tdm -nodaemon. The location of &kdm; may differ on your system.The location of &tdm; may differ on your system. and change one of the lines that look like ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure to instead say ttyv8 "/usr/local/bin/kdm -nodaemon" xterm off securettyv8 "/usr/local/bin/tdm -nodaemon" xterm off secure. @@ -203,7 +203,7 @@ &kde; (&kdm;) does not read my &kde; (&tdm;) does not read my .bash_profile! @@ -211,7 +211,7 @@ The login managersxdm and &kdm; do not run a login shell, so and &tdm; do not run a login shell, so .profile, .bash_profile.xinitrc in your home folder (make a backup copy first!), remove everything that looks like calling a window manager, and insert starttde instead. Restart the &X-Server;. If you use &kdm;/ instead. Restart the &X-Server;. If you use &tdm;/xdm, you will have to edit the file .xsession.xinitrc or .Xclients file if you are not using &kdm; or file if you are not using &tdm; or xdm). Please also remove the lines that start your previous window manager. If there is no .xsessionnumber can be 8, 16, 24 or 32, depending on the depth you want. Alternatively, if you are using xdm/&kdm;, you need to edit /&tdm;, you need to edit /etc/X11/xdm/Xservers (may vary) and enter :0 local /usr/X11R6/bin/X -bpp 16- SUBDIRS = $(AUTODIRS) #>+ 1 -SUBDIRS =. crypto kcmtaskbar keyboard filetypes language kcmfontinst background useragent mouse panelappearance clock spellchecking kcmkonsole icons cookies colors windowmanagement cache fonts filemanager bell panel twindecoration energy kcmstyle kcmlaunch smb email kcmaccess netpref kthememgr proxy desktop khtml kdm arts helpindex passwords ebrowsing kcmnotify keys desktopbehavior kcmcss kcmsmserver screensaver +SUBDIRS =. crypto kcmtaskbar keyboard filetypes language kcmfontinst background useragent mouse panelappearance clock spellchecking kcmkonsole icons cookies colors windowmanagement cache fonts filemanager bell panel twindecoration energy kcmstyle kcmlaunch smb email kcmaccess netpref kthememgr proxy desktop khtml tdm arts helpindex passwords ebrowsing kcmnotify keys desktopbehavior kcmcss kcmsmserver screensaver KDE_DOCS = kcontrol KDE_MANS = AUTO #>- all: all-recursive diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kcmsmserver/index.docbook b/tde-i18n-en_GB/docs/tdebase/kcontrol/kcmsmserver/index.docbook index ff93a172604..7bac2d4cff6 100644 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kcmsmserver/index.docbook +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/kcmsmserver/index.docbook @@ -113,7 +113,7 @@ You can configure what should happen by default when you log out of &kde;. These options are not possible on all operating systems, and they require the use of &kdm; as your login manager. +>You can configure what should happen by default when you log out of &kde;. These options are not possible on all operating systems, and they require the use of &tdm; as your login manager. The options available are self explanatory, if you are in doubt, leave the default settings. They are: diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am index 708091f4185..2023c680fbe 100644 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.am @@ -1,4 +1,4 @@ KDE_LANG = en_GB SUBDIRS = $(AUTODIRS) -KDE_DOCS = kcontrol/kdm +KDE_DOCS = kcontrol/tdm KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in index 5663091e485..2a3ff33fc09 100644 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/Makefile.in @@ -30,7 +30,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -subdir = docs/tdebase/kcontrol/kdm +subdir = docs/tdebase/kcontrol/tdm DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ @@ -188,7 +188,7 @@ KDE_LANG = en_GB #>- SUBDIRS = $(AUTODIRS) #>+ 1 SUBDIRS =. -KDE_DOCS = kcontrol/kdm +KDE_DOCS = kcontrol/tdm KDE_MANS = AUTO #>- all: all-recursive #>+ 1 @@ -204,9 +204,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) #>- exit 1;; \ #>- esac; \ #>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile'; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ #>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile +#>- $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile #>+ 12 @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -216,10 +216,10 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/kdm/Makefile.in + $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -534,19 +534,19 @@ index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook docs-am: index.cache.bz2 install-docs: docs-am install-nls - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm @if test -f index.cache.bz2; then \ - echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/; \ - $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/; \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ elif test -f $(srcdir)/index.cache.bz2; then \ - echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/; \ - $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/; \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/; \ fi - -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/common - $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/common + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/common uninstall-docs: - -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm clean-docs: -rm -f index.cache.bz2 @@ -554,15 +554,15 @@ clean-docs: #>+ 13 install-nls: - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm @for base in index.docbook ; do \ - echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/$$base ;\ - $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/$$base ;\ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ done uninstall-nls: for base in index.docbook ; do \ - rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/kdm/$$base ;\ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kcontrol/tdm/$$base ;\ done @@ -582,10 +582,10 @@ force-reedit: exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kcontrol/kdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/kdm/Makefile.in + $(AUTOMAKE) --gnu docs/tdebase/kcontrol/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kcontrol/tdm/Makefile.in #>+ 21 diff --git a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook index 9133f6bfd69..a54991df318 100644 --- a/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook +++ b/tde-i18n-en_GB/docs/tdebase/kcontrol/kdm/index.docbook @@ -44,7 +44,7 @@ KControl KDM configuration +>TDM configuration login manager Login Manager Using this module, you can configure the &kde; graphical login manager, &kdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. +>Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. In order to organise all of these options, this module is divided into five sections: In order to organise all of these options, this module is divided into five sections: Appearance, , Font, , Background, , Sessions, , Users and and Convenience Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. - + Appearance From this page you can change the visual appearance of &kdm;, &kde;'s graphical login manager. +>From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. The greeting string is the title of the login screen. If the string contains the word HOSTNAME it will be translated to the domainless name of the machine &kdm; is installed on. +> it will be translated to the domainless name of the machine &tdm; is installed on. You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled If you do not specify a logo the default $TDEDIR/share/apps/kdm/pics/kdelogo.png/share/apps/tdm/pics/kdelogo.png will be displayed. While &kde;'s style depends on the settings of the user logged in, the style used by &kdm; can be configured using the While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style option. @@ -148,7 +148,7 @@ - + Font @@ -194,7 +194,7 @@ - + Background @@ -393,7 +393,7 @@ - + Sessions @@ -408,19 +408,19 @@ None: No one can shutdown the computer using &kdm;. You must be logged in, and execute a command. +>: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command. All: Everyone can shutdown the computer using &kdm;. +>: Everyone can shutdown the computer using &tdm;. Root only: &kdm; requires that the : &tdm; requires that the root password be entered before shutting down the computer.When Show boot options is enabled, &kdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your lilo command and to lilo's map file. - + Session types @@ -506,7 +506,7 @@ - + Users @@ -526,7 +526,7 @@ If you choose not to show users, then the login window will be more traditional. Users will need to type their username, and password to gain entrance. This is the preferred way if you have many users on this terminal. - + To show (and sort) or not to show users @@ -547,7 +547,7 @@ - + How to determine which users to show and which users to hide @@ -579,7 +579,7 @@ - + Select users @@ -598,7 +598,7 @@ - + Images @@ -613,13 +613,13 @@ >Every user on the system can be represented by a image. The image for the user is kept in a file called $TDEDIR/share/apps/kdm/pics/users/$/share/apps/tdm/pics/users/$USER.xpm. If the user doesn't have such a file the file $TDEDIR/share/apps/kdm/pics/users/default.xpm/share/apps/tdm/pics/users/default.xpm will be used instead. - + Convenience @@ -667,9 +667,9 @@ Automatic login comes in two flavours: truly automatic login acts like you would expect automatic login to, &ie; &kdm; will automatically login without expecting any input from the user. Enable this using the acts like you would expect automatic login to, &ie; &tdm; will automatically login without expecting any input from the user. Enable this using the Truly automatic login option. If this option is not enabled, &kdm; will start normally, enabling you to login as any user, and will only perform automatic login if you kill the X server, ⪚ by pressing option. If this option is not enabled, &tdm; will start normally, enabling you to login as any user, and will only perform automatic login if you kill the X server, ⪚ by pressing &Ctrl;&Alt;BackspaceAutomatically login after X server crash option allows you to skip the authentication procedure when your X server accidentally crashed. Show previous user will show the name of the last login already entered into the login field in &kdm;. Some site administrators would consider even this a possible security weakness, because potential attackers then know at least one valid login. +> will show the name of the last login already entered into the login field in &tdm;. Some site administrators would consider even this a possible security weakness, because potential attackers then know at least one valid login. diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am index d54600f7b69..bd0d1eb0c27 100644 --- a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am +++ b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.am @@ -1,4 +1,4 @@ KDE_LANG = en_GB SUBDIRS = $(AUTODIRS) -KDE_DOCS = kdm +KDE_DOCS = tdm KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in index eea41964b53..d9e7e8726f1 100644 --- a/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in +++ b/tde-i18n-en_GB/docs/tdebase/kdm/Makefile.in @@ -30,7 +30,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -subdir = docs/tdebase/kdm +subdir = docs/tdebase/tdm DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ @@ -188,7 +188,7 @@ KDE_LANG = en_GB #>- SUBDIRS = $(AUTODIRS) #>+ 1 SUBDIRS =. -KDE_DOCS = kdm +KDE_DOCS = tdm KDE_MANS = AUTO #>- all: all-recursive #>+ 1 @@ -204,9 +204,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) #>- exit 1;; \ #>- esac; \ #>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile'; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ #>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile +#>- $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile #>+ 12 @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -216,10 +216,10 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kdm/Makefile.in + $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -525,28 +525,28 @@ uninstall-am: .NOEXPORT: #>+ 2 -KDE_DIST=kdmrc-ref.docbook Makefile.in index.docbook Makefile.am index.cache.bz2 +KDE_DIST=tdmrc-ref.docbook Makefile.in index.docbook Makefile.am index.cache.bz2 #>+ 24 -index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) kdmrc-ref.docbook index.docbook +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) tdmrc-ref.docbook index.docbook @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi docs-am: index.cache.bz2 install-docs: docs-am install-nls - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm @if test -f index.cache.bz2; then \ - echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/; \ - $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/; \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ elif test -f $(srcdir)/index.cache.bz2; then \ - echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/; \ - $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/; \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/; \ fi - -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/common - $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/common + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/common uninstall-docs: - -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm clean-docs: -rm -f index.cache.bz2 @@ -554,21 +554,21 @@ clean-docs: #>+ 13 install-nls: - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm - @for base in kdmrc-ref.docbook index.docbook ; do \ - echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/$$base ;\ - $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/$$base ;\ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm + @for base in tdmrc-ref.docbook index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ done uninstall-nls: - for base in kdmrc-ref.docbook index.docbook ; do \ - rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdm/$$base ;\ + for base in tdmrc-ref.docbook index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/tdm/$$base ;\ done #>+ 5 distdir-nls: - for file in kdmrc-ref.docbook index.docbook ; do \ + for file in tdmrc-ref.docbook index.docbook ; do \ cp $(srcdir)/$$file $(distdir); \ done @@ -582,10 +582,10 @@ force-reedit: exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/tdebase/kdm/Makefile - cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/kdm/Makefile.in + $(AUTOMAKE) --gnu docs/tdebase/tdm/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdebase/tdm/Makefile.in #>+ 21 diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook b/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook index 8a207a0ffa8..c0c5a7e2a2a 100644 --- a/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook +++ b/tde-i18n-en_GB/docs/tdebase/kdm/index.docbook @@ -1,10 +1,10 @@ + - kdmrctdmrc"> XDMCPxdm"> - + @@ -21,7 +21,7 @@ The &kdm; Handbook +>The &tdm; Handbook This document describes &kdm; the &kde; Display Manager. &kdm; is also known as the This document describes &tdm; the &kde; Display Manager. &tdm; is also known as the Login Manager. @@ -94,7 +94,7 @@ KDE kdm +>tdm xdm Introduction &kdm; provides a graphical interface that allows you to log in to a system. It prompts for login (username) and password, authenticates the user and starts a &tdm; provides a graphical interface that allows you to log in to a system. It prompts for login (username) and password, authenticates the user and starts a session. &kdm; is superior to &xdm;, the X Display Manager, in a number of ways. +>. &tdm; is superior to &xdm;, the X Display Manager, in a number of ways. @@ -120,7 +120,7 @@ - + Configuring &kdm; +>Configuring &tdm; This chapter assumes that &kdm; is already up and running on your system, and that you simply want to change its behaviour in some way. +>This chapter assumes that &tdm; is already up and running on your system, and that you simply want to change its behaviour in some way. When &kdm; starts up, it reads its configuration from the folder $TDEDIR/share/config/kdm/When &tdm; starts up, it reads its configuration from the folder $TDEDIR/share/config/tdm/ (this may be /etc/kde3/kdm//etc/kde3/tdm/ or something else on your system). The main configuration file is &kdmrc;; all other files are referenced from there and could be stored under any name anywhere on the system - but usually that would not make much sense for obvious reasons (one particular exception is referencing configuration files of an already installed &xdm; - however when a new &kdm; is installed, it will import settings from those files if it finds an already installed &xdm;). +>The main configuration file is &tdmrc;; all other files are referenced from there and could be stored under any name anywhere on the system - but usually that would not make much sense for obvious reasons (one particular exception is referencing configuration files of an already installed &xdm; - however when a new &tdm; is installed, it will import settings from those files if it finds an already installed &xdm;). Since &kdm; must run before any user is logged in, it is not associated with any particular user. Therefore, it is not possible to have user-specific configuration files; all users share the common &kdmrc;. It follows from this that the configuration of &kdm; can only be altered by those users that have write access to Since &tdm; must run before any user is logged in, it is not associated with any particular user. Therefore, it is not possible to have user-specific configuration files; all users share the common &tdmrc;. It follows from this that the configuration of &tdm; can only be altered by those users that have write access to $TDEDIR/share/config/kdm/kdmrc/share/config/tdm/tdmrc (normally restricted to system administrators logged in as root). You can view the &kdmrc; file currently in use on your system, and you can configure &kdm; by editing this file. Alternatively, you can use the graphical configuration tool provided by the &kcontrolcenter; (under You can view the &tdmrc; file currently in use on your system, and you can configure &tdm; by editing this file. Alternatively, you can use the graphical configuration tool provided by the &kcontrolcenter; (under System Administration. The remainder of this chapter describes configuration of &kdm; via the &kcontrol; module, and the The remainder of this chapter describes configuration of &tdm; via the &kcontrol; module, and the next chapter describes the options available in &kdmrc; itself. If you only need to configure for local users, the &kcontrol; module should be sufficient for your needs. If you need to configure remote logins, or have multiple &kdm; sessions running, you will need to read on. +> describes the options available in &tdmrc; itself. If you only need to configure for local users, the &kcontrol; module should be sufficient for your needs. If you need to configure remote logins, or have multiple &tdm; sessions running, you will need to read on. - + The Login Manager &kcontrol; Module Using this module, you can configure the &kde; graphical login manager, &kdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. +>Using this module, you can configure the &kde; graphical login manager, &tdm;. You can change how the login screen looks, who has access using the login manager and who can shutdown the computer. All settings will be written to the configuration file &kdmrc;, which in it's original state has many comments to help you configure &kdm;. Using this &kcontrol; module will strip these comments from the file. All available options in &kdmrc; are covered in . +>All settings will be written to the configuration file &tdmrc;, which in it's original state has many comments to help you configure &tdm;. Using this &kcontrol; module will strip these comments from the file. All available options in &tdmrc; are covered in . The options listed in this chapter are cross referenced with their equivalents in &kdmrc;. All options available in the &kcontrol; module are also available directly in &kdmrc; but the reverse is not true.The options listed in this chapter are cross referenced with their equivalents in &tdmrc;. All options available in the &kcontrol; module are also available directly in &tdmrc; but the reverse is not true. In order to organise all of these options, this module is divided into several sections: In order to organise all of these options, this module is divided into several sections: Appearance, , Font, , Background, , Shutdown, , Users and and Convenience Button. You will then be asked for a superuser password. Entering a correct password will allow you to modify the settings of this module. - + Appearance From this page you can change the visual appearance of &kdm;, &kde;'s graphical login manager. +>From this page you can change the visual appearance of &tdm;, &kde;'s graphical login manager. The in &kdmrc;. +> in &tdmrc;. You can then choose to show either the current system time, a logo or nothing special in the login box. Make your choice in the radio buttons labelled in &kdmrc; +> in &tdmrc; If you chose If you do not specify a logo the default $TDEDIR/share/apps/kdm/pics/kdelogo.xpm/share/apps/tdm/pics/kdelogo.xpm will be displayed. in &kdmrc;. +> in &tdmrc;. While &kde;'s style depends on the settings of the user logged in, the style used by &kdm; can be configured using the While &kde;'s style depends on the settings of the user logged in, the style used by &tdm; can be configured using the GUI Style: and Colour Scheme: in &kdmrc; respectively. +> in &tdmrc; respectively. Below that, you have a dropdown box to choose the language for your login box, corresponding to setting in &kdmrc;. +> in &tdmrc;. - + Font @@ -657,7 +657,7 @@ - + Background @@ -856,7 +856,7 @@ - + <guilabel >Shutdown</guilabel @@ -873,19 +873,19 @@ <para ><guilabel >Nobody</guilabel ->: No one can shutdown the computer using &kdm;. You must be logged in, and execute a command.</para> +>: No one can shutdown the computer using &tdm;. You must be logged in, and execute a command.</para> </listitem> <listitem> <para ><guilabel >Everybody</guilabel ->: Everyone can shutdown the computer using &kdm;.</para> +>: Everyone can shutdown the computer using &tdm;.</para> </listitem> <listitem ><para ><guilabel >Only Root</guilabel ->: &kdm; requires that the <systemitem +>: &tdm; requires that the <systemitem >root</systemitem > password be entered before shutting down the computer.</para ></listitem @@ -917,12 +917,12 @@ <para >When <guilabel >Show boot options</guilabel -> is enabled, &kdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your <command +> is enabled, &tdm; will on reboot offer you options for the lilo boot manager. For this feature to work, you will need to supply the correct paths to your <command >lilo</command > command and to lilo's map file.</para> -<sect3 id="kdmconfig-sess"> +<sect3 id="tdmconfig-sess"> <title >Session types @@ -952,7 +952,7 @@ - + Users @@ -960,7 +960,7 @@ >From here you can change the way users are represented in the login window. You may disable the user list in &kdm; entirely in the You may disable the user list in &tdm; entirely in the Show Users section. You can choose from: @@ -1028,7 +1028,7 @@ If you choose not to show users, then the login window will be more traditional. Users will need to type their username and password to gain entrance. This is the preferred way if you have many users on this terminal. - + To show (and sort) or not to show users @@ -1049,7 +1049,7 @@ - + How to determine which users to show and which users to hide @@ -1081,7 +1081,7 @@ - + Select users @@ -1100,7 +1100,7 @@ - + Images @@ -1115,13 +1115,13 @@ >Every user on the system can be represented by an image. The image for each user is kept in a file called $TDEDIR/share/apps/kdm/pics/users/$/share/apps/tdm/pics/users/$USER.xpm. If there is no such file for a particular user, the file $TDEDIR/share/apps/kdm/pics/users/default.xpm/share/apps/tdm/pics/users/default.xpm will be used instead. - + Convenience @@ -1201,13 +1201,13 @@ You can also choose which user is preselected when &kdm; starts. The default is when &tdm; starts. The default is None, but you can choose Previous to have &kdm; default to the last successfully logged in user, or you can to have &tdm; default to the last successfully logged in user, or you can Specify a particular user to always be selected from the list. You can also have &kdm; set the focus to the password field, so that when you reach the &kdm; login screen, you can type the password immediately. +> a particular user to always be selected from the list. You can also have &tdm; set the focus to the password field, so that when you reach the &tdm; login screen, you can type the password immediately. @@ -1217,19 +1217,19 @@ -&kdmrc-ref; +&tdmrc-ref; - + Configuring your system to use &kdm; +>Configuring your system to use &tdm; This chapter assumes that your system is already configured to run the X Window System, and that you only need to reconfigure it to allow graphical login. - + Setting up &kdm; +>Setting up &tdm; The fundamental thing that controls whether your computer boots to a terminal prompt (console mode) or a graphical login prompt is the default runlevel. The runlevel is set by the program The first step in configuring your system is to ensure that you can start &kdm; from the command line. Once this is working, you can change your system configuration so that &kdm; starts automatically each time you reboot your system. +>The first step in configuring your system is to ensure that you can start &tdm; from the command line. Once this is working, you can change your system configuration so that &tdm; starts automatically each time you reboot your system. To test &kdm;, you must first bring your system to a runlevel that does not run &xdm;. To do so, issue a command like this: +>To test &tdm;, you must first bring your system to a runlevel that does not run &xdm;. To do so, issue a command like this: kde. If you previously used &xdm; successfully, you should not need to make any changes to your PAM configuration in order to use &kdm;. configuration in order to use &tdm;. /etc/pam.conf or /etc/pam.d/kde). Now it's time for you to test &kdm; by issuing the following command: +>Now it's time for you to test &tdm; by issuing the following command: kdm If you get a &kdm; login dialogue and you are able to log in, things are going well. The main thing that can go wrong here is that the run-time linker might not find the shared &Qt; or &kde; libraries. If you have a binary distribution of the &kde; libraries, make sure &kdm; is installed where the libraries believe &kde; is installed and try setting some environment variables to point to your &kde; and &Qt; libraries. +>If you get a &tdm; login dialogue and you are able to log in, things are going well. The main thing that can go wrong here is that the run-time linker might not find the shared &Qt; or &kde; libraries. If you have a binary distribution of the &kde; libraries, make sure &tdm; is installed where the libraries believe &kde; is installed and try setting some environment variables to point to your &kde; and &Qt; libraries. For example: @@ -1368,14 +1368,14 @@ id:3:initdefault: >If you are still unsuccessful, try starting &xdm; instead, to make sure that you are not suffering from a more serious X configuration problem. When you are able to start &kdm; successfully, you can start to replace &xdm; by &kdm;. Again, this is distribution-dependent. +>When you are able to start &tdm; successfully, you can start to replace &xdm; by &tdm;. Again, this is distribution-dependent. For &RedHat;, edit /etc/inittab, look for the string xdm and replace it with &kdm; (including all paths). +>, look for the string xdm and replace it with &tdm; (including all paths). /etc/inittab invokes the shell script /etc/X11/prefdm, which is set up to select from amongst several display managers, including &kdm;. Make sure that all the paths are correct for your installation., which is set up to select from amongst several display managers, including &tdm;. Make sure that all the paths are correct for your installation. @@ -1394,7 +1394,7 @@ id:3:initdefault: . /etc/rc.config -DISPLAYMANAGER=kdm +DISPLAYMANAGER=tdm export DISPLAYMANAGER > and find the line like this: ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure and edit it to this: ttyv8 "/usr/local/bin/kdm -nodaemon" xterm on secure +>ttyv8 "/usr/local/bin/tdm -nodaemon" xterm on secure @@ -1415,7 +1415,7 @@ export DISPLAYMANAGER At this stage, you can test &kdm; again by bringing your system to the runlevel that should now run &kdm;. To do so, issue a command like this: +>At this stage, you can test &tdm; again by bringing your system to the runlevel that should now run &tdm;. To do so, issue a command like this: > When you reboot your system, you should end up with the graphical &kdm; login dialogue. +>When you reboot your system, you should end up with the graphical &tdm; login dialogue. If this step is unsuccessful the most likely problem is that the environment used at boot time differs from the environment that you used for testing at the command line. If you are trying to get two versions of KDE to co-exist, be particularly careful that the settings you use for your - + Supporting multiple window managers The main dialogue box for &kdm; includes a The main dialogue box for &tdm; includes a Session Type: drop-down box, which allows you to select a window manager to use for your session. This chapter describes the changes that you must make to your configuration files in order to support this feature. The options that appear in the Session Type: drop-down box are drop-down box are configured by entries in the KDM section of &kdmrc;. +>TDM section of &tdmrc;. When you log in using &kdm;, the shell script When you log in using &tdm;, the shell script Xsession is executed. The session type that you select is passed as a command-line argument. (Xsession >: # now, we see if xdm/gdm/kdm has asked for a specific environment +># now, we see if xdm/gdm/tdm has asked for a specific environment case $# in 1) case $1 in @@ -1638,9 +1638,9 @@ exec $WINDOWMANAGER - + Using &kdm; for Remote Logins (&XDMCP;) +>Using &tdm; for Remote Logins (&XDMCP;) &XDMCP; is the Open Group standard, the Other sources of information Since &kdm; is descended from &xdm;, the Since &tdm; is descended from &xdm;, the xdm man page may provide useful background information. For X-related problems try the man pages X and startx. If you have questions about &kdm; that are not answered by this handbook, take advantage of the fact the &kdm; is provided under the terms of the . If you have questions about &tdm; that are not answered by this handbook, take advantage of the fact the &tdm; is provided under the terms of the GNU General Public Licence: look at the source code. @@ -1680,18 +1680,18 @@ exec $WINDOWMANAGER >Credits and Licence &kdm; is derived from, and includes code from, &xdm; (C) Keith Packard, MIT X Consortium. +>&tdm; is derived from, and includes code from, &xdm; (C) Keith Packard, MIT X Consortium. &kdm; 0.1 was written by Matthias Ettrich. Later versions till &kde; 2.0.x were written by Steffen Hansen. Some new features for &kde; 2.1.x and a major rewrite for &kde; 2.2.x made by Oswald Buddenhagen. +>&tdm; 0.1 was written by Matthias Ettrich. Later versions till &kde; 2.0.x were written by Steffen Hansen. Some new features for &kde; 2.1.x and a major rewrite for &kde; 2.2.x made by Oswald Buddenhagen. Other parts of the &kdm; code are copyright by the authors, and licensed under the terms of the Other parts of the &tdm; code are copyright by the authors, and licensed under the terms of the GNU GPL. Anyone is allowed to change &kdm; and redistribute the result as long as the names of the authors are mentioned. +>. Anyone is allowed to change &tdm; and redistribute the result as long as the names of the authors are mentioned. &kdm; requires the Qt library, which is copyright Troll Tech AS. +>&tdm; requires the Qt library, which is copyright Troll Tech AS. Documentation contributors: @@ -1737,12 +1737,12 @@ exec $WINDOWMANAGER > &underFDL; &underGPL; - + Building and Installing kdm +>Building and Installing tdm &kdm; is part of the KDE project. The various component parts of the KDE project are broken into sections, called packages. &kdm; is part of the package called tdebase. You can get KDE source code from various Linux and BSD distribution CDs, or by download from &tdm; is part of the KDE project. The various component parts of the KDE project are broken into sections, called packages. &tdm; is part of the package called tdebase. You can get KDE source code from various Linux and BSD distribution CDs, or by download from www.kde.org or its mirrors. If you have an out-of-date source code tree, you can use one of the KDE cvsup servers to bring it up-to-date whilst using minimal network bandwidth. @@ -1760,7 +1760,7 @@ exec $WINDOWMANAGER >If the last few paragraphs seemed like a foreign language, then either you have strayed into an Inappropriate Area of this handbook, or you are about to undergo a Great Learning Experience. If you managed to satisfy all of the prerequisites, you are unlikely to have any problems with building and installing tdebase. &kdm; is installed in your If you managed to satisfy all of the prerequisites, you are unlikely to have any problems with building and installing tdebase. &tdm; is installed in your $TDEDIR/bin folder. @@ -1772,7 +1772,7 @@ exec $WINDOWMANAGER > will not overwrite your previous &kdm; config files including &kdmrc;. overwrite your previous &tdm; config files including &tdmrc;. @@ -1786,7 +1786,7 @@ exec $WINDOWMANAGER >greeter The greeter is the login dialogue, &ie; the part of &kdm; which the user sees. +>The greeter is the login dialogue, &ie; the part of &tdm; which the user sees. diff --git a/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook b/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook index 18d6a847588..a778a4b0d2f 100644 --- a/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook +++ b/tde-i18n-en_GB/docs/tdebase/kdm/kdmrc-ref.docbook @@ -1,20 +1,20 @@ - + - + The Files &kdm; Uses for Configuration +>The Files &tdm; Uses for Configuration This chapter documents the files that control &kdm;'s behaviour. Some of this can be also controlled from the &kcontrol; module, but not all. +>This chapter documents the files that control &tdm;'s behaviour. Some of this can be also controlled from the &kcontrol; module, but not all. &kdmrc; - The &kdm; master configuration file +>&tdmrc; - The &tdm; master configuration file The basic format of the file is INI-like. Options are key/value pairs, placed in sections. Everything in the file is case sensitive. Syntactic errors and unrecognised key/section identifiers cause &kdm; to issue non-fatal error messages. +>. Options are key/value pairs, placed in sections. Everything in the file is case sensitive. Syntactic errors and unrecognised key/section identifiers cause &tdm; to issue non-fatal error messages. Lines beginning with A pristine &kdmrc; is very thoroughly commented. All comments will be lost if you change this file with the kcontrol frontend.A pristine &tdmrc; is very thoroughly commented. All comments will be lost if you change this file with the kcontrol frontend. - + The [General] section of &kdmrc; +>The [General] section of &tdmrc; This section contains global options that do not fit into any specific section. @@ -183,7 +183,7 @@ This option exists solely for the purpose of clean automatic upgrades. Do not change it, you may interfere with future upgrades and this could result in &kdm; failing to run. +> change it, you may interfere with future upgrades and this could result in &tdm; failing to run. @@ -194,9 +194,9 @@ > If the value starts with a slash (/), it specifies a file to read &X-Server; definitions from; otherwise, it is an &X-Server; definition by itself. See for the details. If the value starts with a slash (/), it specifies a file to read &X-Server; definitions from; otherwise, it is an &X-Server; definition by itself. See for the details. The default is an &X-Server; definition that is usually reasonable for the system on which &kdm; was built. +>The default is an &X-Server; definition that is usually reasonable for the system on which &tdm; was built. @@ -209,7 +209,7 @@ List of Virtual Terminals to allocate to &X-Server;s. For negative numbers the absolute value is used, and the VT will be allocated only if the kernel says it is free. If &kdm; exhausts this list, it will allocate free will be allocated only if the kernel says it is free. If &tdm; exhausts this list, it will allocate free VTs greater than the absolute value of the last entry in this list. The filename specified will be created to contain an ASCII representation of the process ID of the main &kdm; process; the PID will not be stored if the filename is empty. +>The filename specified will be created to contain an ASCII representation of the process ID of the main &tdm; process; the PID will not be stored if the filename is empty. Empty by default. @@ -237,7 +237,7 @@ > This option controls whether &kdm; uses file locking to keep multiple display managers from running onto each other. +>This option controls whether &tdm; uses file locking to keep multiple display managers from running onto each other. The default is true This names a directory under which &kdm; stores &X-Server; authorisation files while initialising the session. &kdm; expects the system to clean up this directory from stale files on reboot. This names a directory under which &tdm; stores &X-Server; authorisation files while initialising the session. &tdm; expects the system to clean up this directory from stale files on reboot. The authorisation file to be used for a particular display can be specified with the This boolean controls whether &kdm; automatically re-reads its configuration files if it finds them to have changed. +>This boolean controls whether &tdm; automatically re-reads its configuration files if it finds them to have changed. The default is true Additional environment variables &kdm; should pass on to all programs it runs. Additional environment variables &tdm; should pass on to all programs it runs. LD_LIBRARY_PATH and XCURSOR_THEMEPrngdSocket and ) is running, &kdm; will fall back to its own pseudo-random number generator that will, among other things, successively checksum parts of this file (which, obviously, should change frequently). ) is running, &tdm; will fall back to its own pseudo-random number generator that will, among other things, successively checksum parts of this file (which, obviously, should change frequently). This option does not exist on Linux and various BSDs. The path to a character device which KDM should read random data from. Empty means to use the system's preferred entropy device if there is one. The path to a character device which TDM should read random data from. Empty means to use the system's preferred entropy device if there is one. This option does not exist on OpenBSD, as it uses the arc4_random function instead. The directory in which &kdm; should store persistent working data; such data is, for example, the previous user that logged in on a particular display. +>The directory in which &tdm; should store persistent working data; such data is, for example, the previous user that logged in on a particular display. The default is /var/lib/kdm/var/lib/tdm. @@ -416,7 +416,7 @@ > The directory in which &kdm; should store users' The directory in which &tdm; should store users' .dmrc files. This is only needed if the home directories are not readable before actually logging in (like with AFS). - + The [Xdmcp] section of &kdmrc; +>The [Xdmcp] section of &tdmrc; This section contains options that control &kdm;'s handling of &XDMCP; requests. +>This section contains options that control &tdm;'s handling of &XDMCP; requests. @@ -444,7 +444,7 @@ > Whether &kdm; should listen to incoming &XDMCP; requests. +>Whether &tdm; should listen to incoming &XDMCP; requests. The default is true This indicates the UDP port number which &kdm; uses to listen for incoming &XDMCP; requests. Unless you need to debug the system, leave this with its default value. +>This indicates the UDP port number which &tdm; uses to listen for incoming &XDMCP; requests. Unless you need to debug the system, leave this with its default value. The default is 177 XDM-AUTHENTICATION-1 style &XDMCP; authentication requires a private key to be shared between &kdm; and the terminal. This option specifies the file containing those values. Each entry in the file consists of a display name and the shared key. +>XDM-AUTHENTICATION-1 style &XDMCP; authentication requires a private key to be shared between &tdm; and the terminal. This option specifies the file containing those values. Each entry in the file consists of a display name and the shared key. Empty by default. @@ -487,12 +487,12 @@ > To prevent unauthorised &XDMCP; service and to allow forwarding of &XDMCP; IndirectQuery requests, this file contains a database of hostnames which are either allowed direct access to this machine, or have a list of hosts to which queries should be forwarded to. The format of this file is described in . +>To prevent unauthorised &XDMCP; service and to allow forwarding of &XDMCP; IndirectQuery requests, this file contains a database of hostnames which are either allowed direct access to this machine, or have a list of hosts to which queries should be forwarded to. The format of this file is described in . The default is ${kde_confdir}/kdm/Xaccess}/tdm/Xaccess. @@ -519,7 +519,7 @@ > When computing the display name for &XDMCP; clients, the name resolver will typically create a fully qualified host name for the terminal. As this is sometimes confusing, &kdm; will remove the domain name portion of the host name if it is the same as the domain name of the local host when this option is enabled. +>When computing the display name for &XDMCP; clients, the name resolver will typically create a fully qualified host name for the terminal. As this is sometimes confusing, &tdm; will remove the domain name portion of the host name if it is the same as the domain name of the local host when this option is enabled. The default is true - + The [Shutdown] section of &kdmrc; +>The [Shutdown] section of &tdmrc; This section contains global options concerning system shutdown. @@ -581,7 +581,7 @@ The command to run to halt/poweroff the system. The default is something reasonable for the system on which &kdm; was built, like The default is something reasonable for the system on which &tdm; was built, like /sbin/shutdown  The command to run to reboot the system. The default is something reasonable for the system &kdm; on which was built, like The default is something reasonable for the system &tdm; on which was built, like /sbin/shutdown   Instructs &kdm; to offer LiLo boot options in the shutdown dialogue. Instructs &tdm; to offer LiLo boot options in the shutdown dialogue. Only available on Linux i386 & x86-64. - + The [X-*-Core] section class of &kdmrc; +>The [X-*-Core] section class of &tdmrc; This section class contains options concerning the configuration of the &kdm; backend (core). +>This section class contains options concerning the configuration of the &tdm; backend (core). @@ -753,7 +753,7 @@ > These options control the behaviour of &kdm; when attempting to open a connection to an &X-Server;. is the length of the pause (in seconds) between successive attempts, How many times &kdm; should attempt to start a How many times &tdm; should attempt to start a foreign display listed in the Xservers How many times &kdm; should attempt to start up a local &X-Server;. Starting up includes executing it and waiting for it to come up. +>How many times &tdm; should attempt to start up a local &X-Server;. Starting up includes executing it and waiting for it to come up. The default is 1 How many seconds &kdm; should wait for a local &X-Server; to come up. +>How many seconds &tdm; should wait for a local &X-Server; to come up. The default is 15To discover when remote displays disappear, &kdm; regularly pings them. specifies the time (in minutes) between the pings and Whether &kdm; should restart the local &X-Server; after session exit instead of resetting it. Use this if the &X-Server; leaks memory or crashes the system on reset attempts. +>Whether &tdm; should restart the local &X-Server; after session exit instead of resetting it. Use this if the &X-Server; leaks memory or crashes the system on reset attempts. The default is false Controls whether &kdm; generates and uses authorisation for Controls whether &tdm; generates and uses authorisation for local &X-Server; connections. For &XDMCP; displays the authorisation requested by the display is used; foreign non-&XDMCP; displays do not support authorisation at all. Some old &X-Server;s re-read the authorisation file at &X-Server; reset time, instead of when checking the initial connection. As &kdm; generates the authorisation information just before connecting to the display, an old &X-Server; would not get up-to-date authorisation information. This option causes &kdm; to send SIGHUP to the &X-Server; after setting up the file, causing an additional &X-Server; reset to occur, during which time the new authorisation information will be read. +> &X-Server;s re-read the authorisation file at &X-Server; reset time, instead of when checking the initial connection. As &tdm; generates the authorisation information just before connecting to the display, an old &X-Server; would not get up-to-date authorisation information. This option causes &tdm; to send SIGHUP to the &X-Server; after setting up the file, causing an additional &X-Server; reset to occur, during which time the new authorisation information will be read. The default is false This file is used to communicate the authorisation data from &kdm; to the &X-Server;, using the &X-Server; command line option. It should be kept in a directory which is not world-writable as it could easily be removed, disabling the authorisation mechanism in the &X-Server;. If not specified, a random name is generated from xconsole here). The conventional name for a file used here is Xsetup. See . +>. See . Empty by default. @@ -1043,7 +1043,7 @@ >root) after the user authentication process succeeds. The conventional name for a file used here is Xstartup. See . +>. See . Empty by default. @@ -1060,7 +1060,7 @@ >root) after the session terminates. The conventional name for a file used here is Xreset. See . +>. See . Empty by default. @@ -1075,7 +1075,7 @@ This specifies the session program to be executed (as the user owning the session). The conventional name for a file used here is Xsession. See . +>. See . The default is ${If the program fails to execute, &kdm; will fall back to this program. This program is executed with no arguments, but executes using the same environment variables as the session would have had (see ). +> program fails to execute, &tdm; will fall back to this program. This program is executed with no arguments, but executes using the same environment variables as the session would have had (see ). The default is ${Sessions. The default depends on the system &kdm; was built on. +>The default depends on the system &tdm; was built on. @@ -1140,7 +1140,7 @@ >. (the current directory) into this entry. The default depends on the system &kdm; was built on. +>The default depends on the system &tdm; was built on. @@ -1170,7 +1170,7 @@ > When &kdm; is unable to write to the usual user authorisation file ($When &tdm; is unable to write to the usual user authorisation file ($HOME/.Xauthority), it creates a unique file name in this directory and points the environment variable XAUTHORITY If enabled, &kdm; will automatically restart a session after an &X-Server; crash (or if it is killed by Alt-Ctrl-BackSpace). Note that enabling this feature opens a security hole: a secured display lock can be circumvented (unless &kde;'s built-in screen locker is used). +>If enabled, &tdm; will automatically restart a session after an &X-Server; crash (or if it is killed by Alt-Ctrl-BackSpace). Note that enabling this feature opens a security hole: a secured display lock can be circumvented (unless &kde;'s built-in screen locker is used). The default is falsechmod  kdmrctdmrc for obvious reasons. The default is ${kde_datadir}/kdm/sessions}/tdm/sessions. @@ -1564,12 +1564,12 @@ - + The [X-*-Greeter] section class of &kdmrc; +>The [X-*-Greeter] section class of &tdmrc; This section class contains options concerning the configuration of the &kdm; frontend (greeter). +>This section class contains options concerning the configuration of the &tdm; frontend (greeter). @@ -1678,7 +1678,7 @@ > The relative coordinates (percentages of the screen size; X,Y) at which the centre of the greeter is put. &kdm; aligns the greeter to the edges of the screen it would cross otherwise. +>The relative coordinates (percentages of the screen size; X,Y) at which the centre of the greeter is put. &tdm; aligns the greeter to the edges of the screen it would cross otherwise. The default is 50,50If is enabled, this specifies where &kdm; gets the images from: +> is enabled, this specifies where &tdm; gets the images from: The images can be in any format Qt recognises, but the filename must match &kdm;'s expectations: The images can be in any format Qt recognises, but the filename must match &tdm;'s expectations: .face.icon should be a 48x48 icon, while .faceThe default is ${kde_datadir}/kdm/faces}/tdm/faces. @@ -2312,7 +2312,7 @@ > If enabled, &kdm; will automatically start the If enabled, &tdm; will automatically start the krootimage program to set up the background; otherwise, the The default is ${kde_confdir}/kdm/backgroundrc}/tdm/backgroundrc. @@ -2378,7 +2378,7 @@ > This option specifies the maximum time &kdm; will wait for the grabs to succeed. A grab may fail if some other X-client has the &X-Server; or the keyboard grabbed, or possibly if the network latencies are very high. You should be cautious when raising the timeout, as a user can be spoofed by a look-alike window on the display. If a grab fails, &kdm; kills and restarts the &X-Server; (if possible) and the session. +>This option specifies the maximum time &tdm; will wait for the grabs to succeed. A grab may fail if some other X-client has the &X-Server; or the keyboard grabbed, or possibly if the network latencies are very high. You should be cautious when raising the timeout, as a user can be spoofed by a look-alike window on the display. If a grab fails, &tdm; kills and restarts the &X-Server; (if possible) and the session. The default is 3 Enable &kdm;'s built-in Enable &tdm;'s built-in xconsole. Note that this can be enabled for only one display at a time. This option is available only if &kdm; was . Note that this can be enabled for only one display at a time. This option is available only if &tdm; was configured with --enable-tdm-xconsole. The default is The data source for &kdm;'s built-in The data source for &tdm;'s built-in xconsole. If empty, a console log redirection is requested from /dev/consoleShow the Console Login action in the greeter. For this to work, a console must be configured for this particular display, see . +> action in the greeter. For this to work, a console must be configured for this particular display, see . The default is true - + Specifying permanent &X-Server;s Each specification indicates a display which should constantly be managed and which is not using &XDMCP;. This method is typically used only for local &X-Server;s that are started by &kdm;, but &kdm; can manage externally started (Each specification indicates a display which should constantly be managed and which is not using &XDMCP;. This method is typically used only for local &X-Server;s that are started by &tdm;, but &tdm; can manage externally started (foreign) &X-Server;s as well, may they run on the local machine or rather remotely. @@ -2714,12 +2714,12 @@ >localhost prefix from locally running &XDMCP; displays is not stripped to make them distinguishable from local &X-Server;s started by &kdm;. +> stripped to make them distinguishable from local &X-Server;s started by &tdm;. The display class portion is also used in the display-specific sections. This is useful if you have a large collection of similar displays (such as a corral of X terminals) and would like to set options for groups of them. When using &XDMCP;, the display is required to specify the display class, so the manual for your particular X terminal should document the display class string for your device. If it does not, you can run &kdm; in debug mode and portion is also used in the display-specific sections. This is useful if you have a large collection of similar displays (such as a corral of X terminals) and would like to set options for groups of them. When using &XDMCP;, the display is required to specify the display class, so the manual for your particular X terminal should document the display class string for your device. If it does not, you can run &tdm; in debug mode and grep the log for classtty specifies which text console an &X-Server; is covering, so &kdm; knows which console it should monitor for activity after switching to , so &tdm; knows which console it should monitor for activity after switching to Console login to find out when the console session ends. Note that this concept (originating from Solaris) is not perfectly suited for Linux, as there &X-Server;s run on separate virtual terminals and consequently do not actually cover consoles (gettyThe reserve keyword instructs &kdm; to start the display not when &kdm; starts up, but when it is explicitly requested via the command keyword instructs &tdm; to start the display not when &tdm; starts up, but when it is explicitly requested via the command FiFo. If reserve displays are specified, the &kde; menu will have a Start New SessionThe server command specifies the complete &X-Server; command line, including a display number for secondary displays. When &kdm; starts a session, it sets up authorisation data for the &X-Server;. For local servers, &kdm; passes specifies the complete &X-Server; command line, including a display number for secondary displays. When &tdm; starts a session, it sets up authorisation data for the &X-Server;. For local servers, &tdm; passes  filename on the &X-Server;'s command line to point it at its authorisation data. For &XDMCP; displays, &kdm; passes the authorisation data to the &X-Server; via the on the &X-Server;'s command line to point it at its authorisation data. For &XDMCP; displays, &tdm; passes the authorisation data to the &X-Server; via the Accept &XDMCP; message. - + &XDMCP; access control The file specified by the option provides information which &kdm; uses to control access from displays requesting service via &XDMCP;. The file contains four types of entries: entries which control the response to option provides information which &tdm; uses to control access from displays requesting service via &XDMCP;. The file contains four types of entries: entries which control the response to Direct and BroadcastIndirect queries, macro definitions for Indirect entries and entries which control on which network interfaces &kdm; listens for &XDMCP; queries. Blank lines are ignored, entries and entries which control on which network interfaces &tdm; listens for &XDMCP; queries. Blank lines are ignored, # is treated as a comment delimiter causing the rest of that line to be ignored and \Direct queries for a host or pattern, it can be followed by the optional NOBROADCAST keyword. This can be used to prevent a &kdm; server from appearing on menus based on keyword. This can be used to prevent a &tdm; server from appearing on menus based on Broadcast queries. @@ -2811,7 +2811,7 @@ >CHOOSER, Indirect queries are not forwarded, but instead a host chooser dialogue is displayed by &kdm;. The chooser will send a queries are not forwarded, but instead a host chooser dialogue is displayed by &tdm;. The chooser will send a Direct query to each of the remaining host names in the list and offer a menu of all the hosts that respond. The host list may contain the keyword BROADCAST If one or more LISTEN lines are specified, &kdm; listens for &XDMCP; requests only on the specified interfaces. lines are specified, &tdm; listens for &XDMCP; requests only on the specified interfaces. interface may be a hostname or IP address representing a network interface on this machine, or the wildcard * to represent all available network interfaces. If multicast group addresses are listed on a LISTEN line, &kdm; joins the multicast groups on the given interface. For IPv6 multicasts, the IANA has assigned ff0 line, &tdm; joins the multicast groups on the given interface. For IPv6 multicasts, the IANA has assigned ff0X:0:0:0:0:0:0:12b as the permanently assigned range of multicast addresses for &XDMCP;. The X in the prefix may be replaced by any valid scope identifier, such as 1 for Node-Local, 2 for Link-Local, 5 for Site-Local, and so on (see IETF RFC 2373 or its replacement for further details and scope definitions). &kdm; defaults to listening on the Link-Local scope address ff02:0:0:0:0:0:0:12b to most closely match the IPv4 subnet broadcast behavior. If no in the prefix may be replaced by any valid scope identifier, such as 1 for Node-Local, 2 for Link-Local, 5 for Site-Local, and so on (see IETF RFC 2373 or its replacement for further details and scope definitions). &tdm; defaults to listening on the Link-Local scope address ff02:0:0:0:0:0:0:12b to most closely match the IPv4 subnet broadcast behavior. If no LISTEN lines are given, &kdm; listens on all interfaces and joins the default &XDMCP; IPv6 multicast group (when compiled with IPv6 support). To disable listening for &XDMCP; requests altogether, a lines are given, &tdm; listens on all interfaces and joins the default &XDMCP; IPv6 multicast group (when compiled with IPv6 support). To disable listening for &XDMCP; requests altogether, a LISTEN line with no addresses may be specified, but using the [Xdmcp]Supplementary programs The following programs are run by &kdm; at various stages of a session. They typically are shell scripts. +>The following programs are run by &tdm; at various stages of a session. They typically are shell scripts. The Setup, Startup and Reset programs are run as auto if the session results from an automatic login; otherwise, no arguments are passed to them. - + Setup program @@ -2949,7 +2949,7 @@ Note that since &kdm; grabs the keyboard, any other windows will not be able to receive keyboard input. They will be able to interact with the mouse, however; beware of potential security holes here. If is set, Xsetup - + Startup program @@ -3054,11 +3054,11 @@ &kdm; waits until this program exits before starting the user session. If the exit value of this program is non-zero, &kdm; discontinues the session and starts another authentication cycle. +>&tdm; waits until this program exits before starting the user session. If the exit value of this program is non-zero, &tdm; discontinues the session and starts another authentication cycle. - + Session program @@ -3190,7 +3190,7 @@ - + Reset program diff --git a/tde-i18n-en_GB/docs/tdebase/khelpcenter/faq/configkde.docbook b/tde-i18n-en_GB/docs/tdebase/khelpcenter/faq/configkde.docbook index 7402dbde6d5..5b017ecbe76 100644 --- a/tde-i18n-en_GB/docs/tdebase/khelpcenter/faq/configkde.docbook +++ b/tde-i18n-en_GB/docs/tdebase/khelpcenter/faq/configkde.docbook @@ -107,10 +107,10 @@ > and replace it with x:5:respawn:/opt/kde/bin/kdm -nodaemonbin/tdm -nodaemon. The location of &kdm; may differ on your system.The location of &tdm; may differ on your system. and change one of the lines that look like ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure to instead say ttyv8 "/usr/local/bin/kdm -nodaemon" xterm off securettyv8 "/usr/local/bin/tdm -nodaemon" xterm off secure. @@ -203,7 +203,7 @@ &kde; (&kdm;) does not read my &kde; (&tdm;) does not read my .bash_profile! @@ -211,7 +211,7 @@ The login managersxdm and &kdm; do not run a login shell, so and &tdm; do not run a login shell, so .profile, .bash_profile.xinitrc in your home folder (make a backup copy first!), remove everything that looks like calling a window manager, and insert starttde instead. Restart the &X-Server;. If you use &kdm;/ instead. Restart the &X-Server;. If you use &tdm;/xdm, you will have to edit the file .xsession.xinitrc or .Xclients file if you are not using &kdm; or file if you are not using &tdm; or xdm). Please also remove the lines that start your previous window manager. If there is no .xsessionnumber can be 8, 16, 24 or 32, depending on the depth you want. Alternatively, if you are using xdm/&kdm;, you need to edit /&tdm;, you need to edit /etc/X11/xdm/Xservers (may vary) and enter :0 local /usr/X11R6/bin/X -bpp 16 Here you can set the remaining system features - how the &konsole; and &kdm; applications behave, set up printing, and set your system date. You might not be able to set some of these options unless you are logged in as Here you can set the remaining system features - how the &konsole; and &tdm; applications behave, set up printing, and set your system date. You might not be able to set some of these options unless you are logged in as root, but &kcontrol; will let you know if this is the case. diff --git a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/first-impressions.docbook b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/first-impressions.docbook index 1328a2e0170..a94ac9f8794 100644 --- a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/first-impressions.docbook +++ b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/first-impressions.docbook @@ -36,7 +36,7 @@ If you have not done so already, we recommend changing your X display manager from xdm to &kdm;, which includes the same functionality, but with the advanced features of the K Desktop Environment. +> to &tdm;, which includes the same functionality, but with the advanced features of the K Desktop Environment. If your system is configured to automatically log you into a &GUI; you will need to consult your operating system manuals or support forums for instructions how to have &kde; be that &GUI;. diff --git a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/installation.docbook b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/installation.docbook index 34cea7e8c99..c0c1156bb17 100644 --- a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/installation.docbook +++ b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/installation.docbook @@ -279,7 +279,7 @@ >apt-get install tdm @@ -417,7 +417,7 @@ tde-i18n-apt-get install tdm diff --git a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/tdebase-apps.docbook b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/tdebase-apps.docbook index c5f181e5b0b..adf6bbd354c 100644 --- a/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/tdebase-apps.docbook +++ b/tde-i18n-en_GB/docs/tdebase/khelpcenter/userguide/tdebase-apps.docbook @@ -99,7 +99,7 @@ > &kdm;&tdm; &kde;'s login manager Use KDM User Icon +>Use TDM User Icon [true/false] Here you can set the remaining system features - how the &konsole; and &kdm; applications behave, set up printing, and set your system date. You might not be able to set some of these options unless you are logged in as Here you can set the remaining system features - how the &konsole; and &tdm; applications behave, set up printing, and set your system date. You might not be able to set some of these options unless you are logged in as root, but &kcontrol; will let you know if this is the case. diff --git a/tde-i18n-en_GB/docs/tdebase/tdesu/index.docbook b/tde-i18n-en_GB/docs/tdebase/tdesu/index.docbook index 5f1d74613f8..9f0be4d3b98 100644 --- a/tde-i18n-en_GB/docs/tdebase/tdesu/index.docbook +++ b/tde-i18n-en_GB/docs/tdebase/tdesu/index.docbook @@ -200,10 +200,10 @@ > starts with a /, it is taken as an absolute filename. Otherwise, it is taken as the name of a global &kde; configuration file. For example: to configure the K display manager, kdmtdm, you could issue tdesu -c tdmconfig -f tdmrc diff --git a/tde-i18n-en_GB/docs/tdebase/userguide/first-impressions.docbook b/tde-i18n-en_GB/docs/tdebase/userguide/first-impressions.docbook index 1328a2e0170..a94ac9f8794 100644 --- a/tde-i18n-en_GB/docs/tdebase/userguide/first-impressions.docbook +++ b/tde-i18n-en_GB/docs/tdebase/userguide/first-impressions.docbook @@ -36,7 +36,7 @@ If you have not done so already, we recommend changing your X display manager from xdm to &kdm;, which includes the same functionality, but with the advanced features of the K Desktop Environment. +> to &tdm;, which includes the same functionality, but with the advanced features of the K Desktop Environment. If your system is configured to automatically log you into a &GUI; you will need to consult your operating system manuals or support forums for instructions how to have &kde; be that &GUI;. diff --git a/tde-i18n-en_GB/docs/tdebase/userguide/installation.docbook b/tde-i18n-en_GB/docs/tdebase/userguide/installation.docbook index 34cea7e8c99..c0c1156bb17 100644 --- a/tde-i18n-en_GB/docs/tdebase/userguide/installation.docbook +++ b/tde-i18n-en_GB/docs/tdebase/userguide/installation.docbook @@ -279,7 +279,7 @@ >apt-get install tdm @@ -417,7 +417,7 @@ tde-i18n-apt-get install tdm diff --git a/tde-i18n-en_GB/messages/tdebase/Makefile.in b/tde-i18n-en_GB/messages/tdebase/Makefile.in index 20071d2c49f..72ef7d88f38 100644 --- a/tde-i18n-en_GB/messages/tdebase/Makefile.in +++ b/tde-i18n-en_GB/messages/tdebase/Makefile.in @@ -192,8 +192,8 @@ KDE_LANG = en_GB SUBDIRS =. #>- POFILES = AUTO #>+ 2 -POFILES = kio_sftp.po kate.po kjobviewer.po libkickermenu_konsole.po kcmkicker.po nsplugin.po display.po extensionproxy.po kdcop.po kcmbackground.po kstyle_keramik_config.po kcmlaunch.po kcminfo.po kcmtwinrules.po kasbarextension.po khtmlkttsd.po libdmctl.po ksplashthemes.po kgreet_classic.po kcontrol.po kmenuapplet.po kio_tar.po kcmview1394.po kcmbell.po kcmcomponentchooser.po kdmgreet.po kdesktop.po kpersonalizer.po ksplash.po kcmaccessibility.po kminipagerapplet.po kcmkded.po kio_remote.po kio_home.po tdeprintfax.po kcmicons.po filetypes.po kcmenergy.po kappfinder.po kthememanager.po kcmtaskbar.po kcmcgi.po kio_media.po libkickermenu_tom.po kio_finger.po ktip.po kaccess.po kio_pop3.po tdesud.po kio_fish.po kicker.po kcmkdnssd.po krdb.po libkickermenu_systemmenu.po kcmkio.po krunapplet.po kcmhtmlsearch.po kcmfonts.po libtaskbar.po useraccount.po knetattach.po kcmkonsole.po appletproxy.po dockbarextension.po kcmkonq.po kio_nntp.po kwriteconfig.po kio_ldap.po konsole.po kstart.po klipper.po kcmspellchecking.po kcmkurifilt.po kdepasswd.po clockapplet.po mediaapplet.po kdialog.po kcmlayout.po kpager.po twin_clients.po kdebugdialog.po kcmnotify.po kio_nfs.po kcmprintmgr.po ksystemtrayapplet.po kcmxinerama.po kreadconfig.po kay.po libkickermenu_remotemenu.po lockout.po kcmtwindecoration.po kxkb.po kprinter.po libtaskmanager.po kio_system.po trashapplet.po kcmcrypto.po kcmnic.po privacy.po libkickermenu_tdeprint.po kscreensaver.po libkonq.po libkickermenu_recentdocs.po kmenuedit.po kio_trash.po kio_floppy.po krandr.po khotkeys.po kcmkclock.po kio_man.po ksystraycmd.po kcmsmartcard.po twin.po libkicker.po khelpcenter.po ksmserver.po kgreet_winbind.po drkonqi.po twin_lib.po kio_settings.po ksysguard.po kfontinst.po kcmscreensaver.po konqueror.po tdesu.po kcmsmserver.po kcmcolors.po kcminput.po kcmlocale.po kio_print.po kcmstyle.po kcmkeys.po kcmioslaveinfo.po kfmclient.po kfindpart.po kio_mac.po kio_smb.po kcmmedia.po naughtyapplet.po kcmkwm.po htmlsearch.po kcmcss.po kcmusb.po kcmperformance.po kio_thumbnail.po kcmarts.po libkickermenu_prefmenu.po joystick.po kdmconfig.po kcmaccess.po kcmkonqhtml.po quicklauncher.po kcmsamba.po tdeprint_part.po kio_smtp.po -GMOFILES = kio_sftp.gmo kate.gmo kjobviewer.gmo libkickermenu_konsole.gmo kcmkicker.gmo nsplugin.gmo display.gmo extensionproxy.gmo kdcop.gmo kcmbackground.gmo kstyle_keramik_config.gmo kcmlaunch.gmo kcminfo.gmo kcmtwinrules.gmo kasbarextension.gmo khtmlkttsd.gmo libdmctl.gmo ksplashthemes.gmo kgreet_classic.gmo kcontrol.gmo kmenuapplet.gmo kio_tar.gmo kcmview1394.gmo kcmbell.gmo kcmcomponentchooser.gmo kdmgreet.gmo kdesktop.gmo kpersonalizer.gmo ksplash.gmo kcmaccessibility.gmo kminipagerapplet.gmo kcmkded.gmo kio_remote.gmo kio_home.gmo tdeprintfax.gmo kcmicons.gmo filetypes.gmo kcmenergy.gmo kappfinder.gmo kthememanager.gmo kcmtaskbar.gmo kcmcgi.gmo kio_media.gmo libkickermenu_tom.gmo kio_finger.gmo ktip.gmo kaccess.gmo kio_pop3.gmo tdesud.gmo kio_fish.gmo kicker.gmo kcmkdnssd.gmo krdb.gmo libkickermenu_systemmenu.gmo kcmkio.gmo krunapplet.gmo kcmhtmlsearch.gmo kcmfonts.gmo libtaskbar.gmo useraccount.gmo knetattach.gmo kcmkonsole.gmo appletproxy.gmo dockbarextension.gmo kcmkonq.gmo kio_nntp.gmo kwriteconfig.gmo kio_ldap.gmo konsole.gmo kstart.gmo klipper.gmo kcmspellchecking.gmo kcmkurifilt.gmo kdepasswd.gmo clockapplet.gmo mediaapplet.gmo kdialog.gmo kcmlayout.gmo kpager.gmo twin_clients.gmo kdebugdialog.gmo kcmnotify.gmo kio_nfs.gmo kcmprintmgr.gmo ksystemtrayapplet.gmo kcmxinerama.gmo kreadconfig.gmo kay.gmo libkickermenu_remotemenu.gmo lockout.gmo kcmtwindecoration.gmo kxkb.gmo kprinter.gmo libtaskmanager.gmo kio_system.gmo trashapplet.gmo kcmcrypto.gmo kcmnic.gmo privacy.gmo libkickermenu_tdeprint.gmo kscreensaver.gmo libkonq.gmo libkickermenu_recentdocs.gmo kmenuedit.gmo kio_trash.gmo kio_floppy.gmo krandr.gmo khotkeys.gmo kcmkclock.gmo kio_man.gmo ksystraycmd.gmo kcmsmartcard.gmo twin.gmo libkicker.gmo khelpcenter.gmo ksmserver.gmo kgreet_winbind.gmo drkonqi.gmo twin_lib.gmo kio_settings.gmo ksysguard.gmo kfontinst.gmo kcmscreensaver.gmo konqueror.gmo tdesu.gmo kcmsmserver.gmo kcmcolors.gmo kcminput.gmo kcmlocale.gmo kio_print.gmo kcmstyle.gmo kcmkeys.gmo kcmioslaveinfo.gmo kfmclient.gmo kfindpart.gmo kio_mac.gmo kio_smb.gmo kcmmedia.gmo naughtyapplet.gmo kcmkwm.gmo htmlsearch.gmo kcmcss.gmo kcmusb.gmo kcmperformance.gmo kio_thumbnail.gmo kcmarts.gmo libkickermenu_prefmenu.gmo joystick.gmo kdmconfig.gmo kcmaccess.gmo kcmkonqhtml.gmo quicklauncher.gmo kcmsamba.gmo tdeprint_part.gmo kio_smtp.gmo +POFILES = kio_sftp.po kate.po kjobviewer.po libkickermenu_konsole.po kcmkicker.po nsplugin.po display.po extensionproxy.po kdcop.po kcmbackground.po kstyle_keramik_config.po kcmlaunch.po kcminfo.po kcmtwinrules.po kasbarextension.po khtmlkttsd.po libdmctl.po ksplashthemes.po kgreet_classic.po kcontrol.po kmenuapplet.po kio_tar.po kcmview1394.po kcmbell.po kcmcomponentchooser.po tdmgreet.po kdesktop.po kpersonalizer.po ksplash.po kcmaccessibility.po kminipagerapplet.po kcmkded.po kio_remote.po kio_home.po tdeprintfax.po kcmicons.po filetypes.po kcmenergy.po kappfinder.po kthememanager.po kcmtaskbar.po kcmcgi.po kio_media.po libkickermenu_tom.po kio_finger.po ktip.po kaccess.po kio_pop3.po tdesud.po kio_fish.po kicker.po kcmkdnssd.po krdb.po libkickermenu_systemmenu.po kcmkio.po krunapplet.po kcmhtmlsearch.po kcmfonts.po libtaskbar.po useraccount.po knetattach.po kcmkonsole.po appletproxy.po dockbarextension.po kcmkonq.po kio_nntp.po kwriteconfig.po kio_ldap.po konsole.po kstart.po klipper.po kcmspellchecking.po kcmkurifilt.po kdepasswd.po clockapplet.po mediaapplet.po kdialog.po kcmlayout.po kpager.po twin_clients.po kdebugdialog.po kcmnotify.po kio_nfs.po kcmprintmgr.po ksystemtrayapplet.po kcmxinerama.po kreadconfig.po kay.po libkickermenu_remotemenu.po lockout.po kcmtwindecoration.po kxkb.po kprinter.po libtaskmanager.po kio_system.po trashapplet.po kcmcrypto.po kcmnic.po privacy.po libkickermenu_tdeprint.po kscreensaver.po libkonq.po libkickermenu_recentdocs.po kmenuedit.po kio_trash.po kio_floppy.po krandr.po khotkeys.po kcmkclock.po kio_man.po ksystraycmd.po kcmsmartcard.po twin.po libkicker.po khelpcenter.po ksmserver.po kgreet_winbind.po drkonqi.po twin_lib.po kio_settings.po ksysguard.po kfontinst.po kcmscreensaver.po konqueror.po tdesu.po kcmsmserver.po kcmcolors.po kcminput.po kcmlocale.po kio_print.po kcmstyle.po kcmkeys.po kcmioslaveinfo.po kfmclient.po kfindpart.po kio_mac.po kio_smb.po kcmmedia.po naughtyapplet.po kcmkwm.po htmlsearch.po kcmcss.po kcmusb.po kcmperformance.po kio_thumbnail.po kcmarts.po libkickermenu_prefmenu.po joystick.po tdmconfig.po kcmaccess.po kcmkonqhtml.po quicklauncher.po kcmsamba.po tdeprint_part.po kio_smtp.po +GMOFILES = kio_sftp.gmo kate.gmo kjobviewer.gmo libkickermenu_konsole.gmo kcmkicker.gmo nsplugin.gmo display.gmo extensionproxy.gmo kdcop.gmo kcmbackground.gmo kstyle_keramik_config.gmo kcmlaunch.gmo kcminfo.gmo kcmtwinrules.gmo kasbarextension.gmo khtmlkttsd.gmo libdmctl.gmo ksplashthemes.gmo kgreet_classic.gmo kcontrol.gmo kmenuapplet.gmo kio_tar.gmo kcmview1394.gmo kcmbell.gmo kcmcomponentchooser.gmo tdmgreet.gmo kdesktop.gmo kpersonalizer.gmo ksplash.gmo kcmaccessibility.gmo kminipagerapplet.gmo kcmkded.gmo kio_remote.gmo kio_home.gmo tdeprintfax.gmo kcmicons.gmo filetypes.gmo kcmenergy.gmo kappfinder.gmo kthememanager.gmo kcmtaskbar.gmo kcmcgi.gmo kio_media.gmo libkickermenu_tom.gmo kio_finger.gmo ktip.gmo kaccess.gmo kio_pop3.gmo tdesud.gmo kio_fish.gmo kicker.gmo kcmkdnssd.gmo krdb.gmo libkickermenu_systemmenu.gmo kcmkio.gmo krunapplet.gmo kcmhtmlsearch.gmo kcmfonts.gmo libtaskbar.gmo useraccount.gmo knetattach.gmo kcmkonsole.gmo appletproxy.gmo dockbarextension.gmo kcmkonq.gmo kio_nntp.gmo kwriteconfig.gmo kio_ldap.gmo konsole.gmo kstart.gmo klipper.gmo kcmspellchecking.gmo kcmkurifilt.gmo kdepasswd.gmo clockapplet.gmo mediaapplet.gmo kdialog.gmo kcmlayout.gmo kpager.gmo twin_clients.gmo kdebugdialog.gmo kcmnotify.gmo kio_nfs.gmo kcmprintmgr.gmo ksystemtrayapplet.gmo kcmxinerama.gmo kreadconfig.gmo kay.gmo libkickermenu_remotemenu.gmo lockout.gmo kcmtwindecoration.gmo kxkb.gmo kprinter.gmo libtaskmanager.gmo kio_system.gmo trashapplet.gmo kcmcrypto.gmo kcmnic.gmo privacy.gmo libkickermenu_tdeprint.gmo kscreensaver.gmo libkonq.gmo libkickermenu_recentdocs.gmo kmenuedit.gmo kio_trash.gmo kio_floppy.gmo krandr.gmo khotkeys.gmo kcmkclock.gmo kio_man.gmo ksystraycmd.gmo kcmsmartcard.gmo twin.gmo libkicker.gmo khelpcenter.gmo ksmserver.gmo kgreet_winbind.gmo drkonqi.gmo twin_lib.gmo kio_settings.gmo ksysguard.gmo kfontinst.gmo kcmscreensaver.gmo konqueror.gmo tdesu.gmo kcmsmserver.gmo kcmcolors.gmo kcminput.gmo kcmlocale.gmo kio_print.gmo kcmstyle.gmo kcmkeys.gmo kcmioslaveinfo.gmo kfmclient.gmo kfindpart.gmo kio_mac.gmo kio_smb.gmo kcmmedia.gmo naughtyapplet.gmo kcmkwm.gmo htmlsearch.gmo kcmcss.gmo kcmusb.gmo kcmperformance.gmo kio_thumbnail.gmo kcmarts.gmo libkickermenu_prefmenu.gmo joystick.gmo tdmconfig.gmo kcmaccess.gmo kcmkonqhtml.gmo quicklauncher.gmo kcmsamba.gmo tdeprint_part.gmo kio_smtp.gmo #>- all: all-recursive #>+ 1 all: all-nls docs-am all-recursive @@ -531,7 +531,7 @@ uninstall-am: .NOEXPORT: #>+ 2 -KDE_DIST=libkickermenu_remotemenu.po appletproxy.po kcminput.po kcmaccessibility.po krandr.po twin.po libtaskmanager.po libkickermenu_tom.po kappfinder.po dockbarextension.po kcmmedia.po filetypes.po kreadconfig.po kio_smtp.po ksplashthemes.po kcmcolors.po display.po kfmclient.po kate.po kcmnotify.po libkonq.po kstyle_keramik_config.po privacy.po kxkb.po kio_finger.po kcontrol.po konqueror.po kcmsamba.po ksmserver.po mediaapplet.po kcmenergy.po tdeprintfax.po kcmview1394.po kio_tar.po kcmxinerama.po libkickermenu_systemmenu.po kjobviewer.po kio_mac.po kcmtwindecoration.po ksplash.po kio_nfs.po ksystemtrayapplet.po htmlsearch.po twin_lib.po kthememanager.po klipper.po kaccess.po kdepasswd.po kicker.po khtmlkttsd.po kwriteconfig.po kcmkonsole.po kmenuapplet.po kmenuedit.po kcmsmartcard.po kcmkeys.po kcmcgi.po kcmkclock.po Makefile.in tdesu.po kcmstyle.po kcmhtmlsearch.po kcminfo.po kdialog.po kcmcrypto.po libkickermenu_prefmenu.po kio_media.po kminipagerapplet.po kcmkonqhtml.po kcmaccess.po ksysguard.po kdesktop.po kio_floppy.po kcmnic.po kio_nntp.po kdmconfig.po trashapplet.po extensionproxy.po kio_ldap.po ktip.po kcmusb.po kcmperformance.po kdebugdialog.po khotkeys.po kgreet_winbind.po kio_smb.po libkickermenu_tdeprint.po kdmgreet.po knetattach.po nsplugin.po kcmcss.po kio_sftp.po kcmkio.po kcmfonts.po useraccount.po kcmkwm.po twin_clients.po kio_settings.po libkickermenu_recentdocs.po kdcop.po kcmkdnssd.po libtaskbar.po kcmkurifilt.po kio_pop3.po joystick.po libkicker.po krunapplet.po kcmbackground.po lockout.po kcmtwinrules.po libdmctl.po krdb.po kio_home.po tdesud.po kcmioslaveinfo.po kio_remote.po kgreet_classic.po konsole.po libkickermenu_konsole.po kcmkonq.po kcmspellchecking.po kcmprintmgr.po kio_thumbnail.po kcmbell.po tdeprint_part.po kcmcomponentchooser.po kcmlocale.po kcmarts.po kasbarextension.po kio_system.po kay.po kscreensaver.po khelpcenter.po kprinter.po kpager.po drkonqi.po kcmscreensaver.po kcmlaunch.po kstart.po kcmlayout.po kfindpart.po kio_print.po kcmicons.po quicklauncher.po kio_fish.po clockapplet.po ksystraycmd.po kcmkicker.po kio_trash.po kfontinst.po kcmtaskbar.po naughtyapplet.po Makefile.am kio_man.po kpersonalizer.po kcmkded.po kcmsmserver.po +KDE_DIST=libkickermenu_remotemenu.po appletproxy.po kcminput.po kcmaccessibility.po krandr.po twin.po libtaskmanager.po libkickermenu_tom.po kappfinder.po dockbarextension.po kcmmedia.po filetypes.po kreadconfig.po kio_smtp.po ksplashthemes.po kcmcolors.po display.po kfmclient.po kate.po kcmnotify.po libkonq.po kstyle_keramik_config.po privacy.po kxkb.po kio_finger.po kcontrol.po konqueror.po kcmsamba.po ksmserver.po mediaapplet.po kcmenergy.po tdeprintfax.po kcmview1394.po kio_tar.po kcmxinerama.po libkickermenu_systemmenu.po kjobviewer.po kio_mac.po kcmtwindecoration.po ksplash.po kio_nfs.po ksystemtrayapplet.po htmlsearch.po twin_lib.po kthememanager.po klipper.po kaccess.po kdepasswd.po kicker.po khtmlkttsd.po kwriteconfig.po kcmkonsole.po kmenuapplet.po kmenuedit.po kcmsmartcard.po kcmkeys.po kcmcgi.po kcmkclock.po Makefile.in tdesu.po kcmstyle.po kcmhtmlsearch.po kcminfo.po kdialog.po kcmcrypto.po libkickermenu_prefmenu.po kio_media.po kminipagerapplet.po kcmkonqhtml.po kcmaccess.po ksysguard.po kdesktop.po kio_floppy.po kcmnic.po kio_nntp.po tdmconfig.po trashapplet.po extensionproxy.po kio_ldap.po ktip.po kcmusb.po kcmperformance.po kdebugdialog.po khotkeys.po kgreet_winbind.po kio_smb.po libkickermenu_tdeprint.po tdmgreet.po knetattach.po nsplugin.po kcmcss.po kio_sftp.po kcmkio.po kcmfonts.po useraccount.po kcmkwm.po twin_clients.po kio_settings.po libkickermenu_recentdocs.po kdcop.po kcmkdnssd.po libtaskbar.po kcmkurifilt.po kio_pop3.po joystick.po libkicker.po krunapplet.po kcmbackground.po lockout.po kcmtwinrules.po libdmctl.po krdb.po kio_home.po tdesud.po kcmioslaveinfo.po kio_remote.po kgreet_classic.po konsole.po libkickermenu_konsole.po kcmkonq.po kcmspellchecking.po kcmprintmgr.po kio_thumbnail.po kcmbell.po tdeprint_part.po kcmcomponentchooser.po kcmlocale.po kcmarts.po kasbarextension.po kio_system.po kay.po kscreensaver.po khelpcenter.po kprinter.po kpager.po drkonqi.po kcmscreensaver.po kcmlaunch.po kstart.po kcmlayout.po kfindpart.po kio_print.po kcmicons.po quicklauncher.po kio_fish.po clockapplet.po ksystraycmd.po kcmkicker.po kio_trash.po kfontinst.po kcmtaskbar.po naughtyapplet.po Makefile.am kio_man.po kpersonalizer.po kcmkded.po kcmsmserver.po #>+ 466 kio_sftp.gmo: kio_sftp.po @@ -609,9 +609,9 @@ kcmbell.gmo: kcmbell.po kcmcomponentchooser.gmo: kcmcomponentchooser.po rm -f kcmcomponentchooser.gmo; $(GMSGFMT) -o kcmcomponentchooser.gmo $(srcdir)/kcmcomponentchooser.po test ! -f kcmcomponentchooser.gmo || touch kcmcomponentchooser.gmo -kdmgreet.gmo: kdmgreet.po - rm -f kdmgreet.gmo; $(GMSGFMT) -o kdmgreet.gmo $(srcdir)/kdmgreet.po - test ! -f kdmgreet.gmo || touch kdmgreet.gmo +tdmgreet.gmo: tdmgreet.po + rm -f tdmgreet.gmo; $(GMSGFMT) -o tdmgreet.gmo $(srcdir)/tdmgreet.po + test ! -f tdmgreet.gmo || touch tdmgreet.gmo kdesktop.gmo: kdesktop.po rm -f kdesktop.gmo; $(GMSGFMT) -o kdesktop.gmo $(srcdir)/kdesktop.po test ! -f kdesktop.gmo || touch kdesktop.gmo @@ -978,9 +978,9 @@ libkickermenu_prefmenu.gmo: libkickermenu_prefmenu.po joystick.gmo: joystick.po rm -f joystick.gmo; $(GMSGFMT) -o joystick.gmo $(srcdir)/joystick.po test ! -f joystick.gmo || touch joystick.gmo -kdmconfig.gmo: kdmconfig.po - rm -f kdmconfig.gmo; $(GMSGFMT) -o kdmconfig.gmo $(srcdir)/kdmconfig.po - test ! -f kdmconfig.gmo || touch kdmconfig.gmo +tdmconfig.gmo: tdmconfig.po + rm -f tdmconfig.gmo; $(GMSGFMT) -o tdmconfig.gmo $(srcdir)/tdmconfig.po + test ! -f tdmconfig.gmo || touch tdmconfig.gmo kcmaccess.gmo: kcmaccess.po rm -f kcmaccess.gmo; $(GMSGFMT) -o kcmaccess.gmo $(srcdir)/kcmaccess.po test ! -f kcmaccess.gmo || touch kcmaccess.gmo @@ -1002,12 +1002,12 @@ kio_smtp.gmo: kio_smtp.po #>+ 3 clean-nls: - -rm -f kio_sftp.gmo kate.gmo kjobviewer.gmo libkickermenu_konsole.gmo kcmkicker.gmo nsplugin.gmo display.gmo extensionproxy.gmo kdcop.gmo kcmbackground.gmo kstyle_keramik_config.gmo kcmlaunch.gmo kcminfo.gmo kcmtwinrules.gmo kasbarextension.gmo khtmlkttsd.gmo libdmctl.gmo ksplashthemes.gmo kgreet_classic.gmo kcontrol.gmo kmenuapplet.gmo kio_tar.gmo kcmview1394.gmo kcmbell.gmo kcmcomponentchooser.gmo kdmgreet.gmo kdesktop.gmo kpersonalizer.gmo ksplash.gmo kcmaccessibility.gmo kminipagerapplet.gmo kcmkded.gmo kio_remote.gmo kio_home.gmo tdeprintfax.gmo kcmicons.gmo filetypes.gmo kcmenergy.gmo kappfinder.gmo kthememanager.gmo kcmtaskbar.gmo kcmcgi.gmo kio_media.gmo libkickermenu_tom.gmo kio_finger.gmo ktip.gmo kaccess.gmo kio_pop3.gmo tdesud.gmo kio_fish.gmo kicker.gmo kcmkdnssd.gmo krdb.gmo libkickermenu_systemmenu.gmo kcmkio.gmo krunapplet.gmo kcmhtmlsearch.gmo kcmfonts.gmo libtaskbar.gmo useraccount.gmo knetattach.gmo kcmkonsole.gmo appletproxy.gmo dockbarextension.gmo kcmkonq.gmo kio_nntp.gmo kwriteconfig.gmo kio_ldap.gmo konsole.gmo kstart.gmo klipper.gmo kcmspellchecking.gmo kcmkurifilt.gmo kdepasswd.gmo clockapplet.gmo mediaapplet.gmo kdialog.gmo kcmlayout.gmo kpager.gmo twin_clients.gmo kdebugdialog.gmo kcmnotify.gmo kio_nfs.gmo kcmprintmgr.gmo ksystemtrayapplet.gmo kcmxinerama.gmo kreadconfig.gmo kay.gmo libkickermenu_remotemenu.gmo lockout.gmo kcmtwindecoration.gmo kxkb.gmo kprinter.gmo libtaskmanager.gmo kio_system.gmo trashapplet.gmo kcmcrypto.gmo kcmnic.gmo privacy.gmo libkickermenu_tdeprint.gmo kscreensaver.gmo libkonq.gmo libkickermenu_recentdocs.gmo kmenuedit.gmo kio_trash.gmo kio_floppy.gmo krandr.gmo khotkeys.gmo kcmkclock.gmo kio_man.gmo ksystraycmd.gmo kcmsmartcard.gmo twin.gmo libkicker.gmo khelpcenter.gmo ksmserver.gmo kgreet_winbind.gmo drkonqi.gmo twin_lib.gmo kio_settings.gmo ksysguard.gmo kfontinst.gmo kcmscreensaver.gmo konqueror.gmo tdesu.gmo kcmsmserver.gmo kcmcolors.gmo kcminput.gmo kcmlocale.gmo kio_print.gmo kcmstyle.gmo kcmkeys.gmo kcmioslaveinfo.gmo kfmclient.gmo kfindpart.gmo kio_mac.gmo kio_smb.gmo kcmmedia.gmo naughtyapplet.gmo kcmkwm.gmo htmlsearch.gmo kcmcss.gmo kcmusb.gmo kcmperformance.gmo kio_thumbnail.gmo kcmarts.gmo libkickermenu_prefmenu.gmo joystick.gmo kdmconfig.gmo kcmaccess.gmo kcmkonqhtml.gmo quicklauncher.gmo kcmsamba.gmo tdeprint_part.gmo kio_smtp.gmo + -rm -f kio_sftp.gmo kate.gmo kjobviewer.gmo libkickermenu_konsole.gmo kcmkicker.gmo nsplugin.gmo display.gmo extensionproxy.gmo kdcop.gmo kcmbackground.gmo kstyle_keramik_config.gmo kcmlaunch.gmo kcminfo.gmo kcmtwinrules.gmo kasbarextension.gmo khtmlkttsd.gmo libdmctl.gmo ksplashthemes.gmo kgreet_classic.gmo kcontrol.gmo kmenuapplet.gmo kio_tar.gmo kcmview1394.gmo kcmbell.gmo kcmcomponentchooser.gmo tdmgreet.gmo kdesktop.gmo kpersonalizer.gmo ksplash.gmo kcmaccessibility.gmo kminipagerapplet.gmo kcmkded.gmo kio_remote.gmo kio_home.gmo tdeprintfax.gmo kcmicons.gmo filetypes.gmo kcmenergy.gmo kappfinder.gmo kthememanager.gmo kcmtaskbar.gmo kcmcgi.gmo kio_media.gmo libkickermenu_tom.gmo kio_finger.gmo ktip.gmo kaccess.gmo kio_pop3.gmo tdesud.gmo kio_fish.gmo kicker.gmo kcmkdnssd.gmo krdb.gmo libkickermenu_systemmenu.gmo kcmkio.gmo krunapplet.gmo kcmhtmlsearch.gmo kcmfonts.gmo libtaskbar.gmo useraccount.gmo knetattach.gmo kcmkonsole.gmo appletproxy.gmo dockbarextension.gmo kcmkonq.gmo kio_nntp.gmo kwriteconfig.gmo kio_ldap.gmo konsole.gmo kstart.gmo klipper.gmo kcmspellchecking.gmo kcmkurifilt.gmo kdepasswd.gmo clockapplet.gmo mediaapplet.gmo kdialog.gmo kcmlayout.gmo kpager.gmo twin_clients.gmo kdebugdialog.gmo kcmnotify.gmo kio_nfs.gmo kcmprintmgr.gmo ksystemtrayapplet.gmo kcmxinerama.gmo kreadconfig.gmo kay.gmo libkickermenu_remotemenu.gmo lockout.gmo kcmtwindecoration.gmo kxkb.gmo kprinter.gmo libtaskmanager.gmo kio_system.gmo trashapplet.gmo kcmcrypto.gmo kcmnic.gmo privacy.gmo libkickermenu_tdeprint.gmo kscreensaver.gmo libkonq.gmo libkickermenu_recentdocs.gmo kmenuedit.gmo kio_trash.gmo kio_floppy.gmo krandr.gmo khotkeys.gmo kcmkclock.gmo kio_man.gmo ksystraycmd.gmo kcmsmartcard.gmo twin.gmo libkicker.gmo khelpcenter.gmo ksmserver.gmo kgreet_winbind.gmo drkonqi.gmo twin_lib.gmo kio_settings.gmo ksysguard.gmo kfontinst.gmo kcmscreensaver.gmo konqueror.gmo tdesu.gmo kcmsmserver.gmo kcmcolors.gmo kcminput.gmo kcmlocale.gmo kio_print.gmo kcmstyle.gmo kcmkeys.gmo kcmioslaveinfo.gmo kfmclient.gmo kfindpart.gmo kio_mac.gmo kio_smb.gmo kcmmedia.gmo naughtyapplet.gmo kcmkwm.gmo htmlsearch.gmo kcmcss.gmo kcmusb.gmo kcmperformance.gmo kio_thumbnail.gmo kcmarts.gmo libkickermenu_prefmenu.gmo joystick.gmo tdmconfig.gmo kcmaccess.gmo kcmkonqhtml.gmo quicklauncher.gmo kcmsamba.gmo tdeprint_part.gmo kio_smtp.gmo #>+ 10 install-nls: $(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES - @for base in kio_sftp kate kjobviewer libkickermenu_konsole kcmkicker nsplugin display extensionproxy kdcop kcmbackground kstyle_keramik_config kcmlaunch kcminfo kcmtwinrules kasbarextension khtmlkttsd libdmctl ksplashthemes kgreet_classic kcontrol kmenuapplet kio_tar kcmview1394 kcmbell kcmcomponentchooser kdmgreet kdesktop kpersonalizer ksplash kcmaccessibility kminipagerapplet kcmkded kio_remote kio_home tdeprintfax kcmicons filetypes kcmenergy kappfinder kthememanager kcmtaskbar kcmcgi kio_media libkickermenu_tom kio_finger ktip kaccess kio_pop3 tdesud kio_fish kicker kcmkdnssd krdb libkickermenu_systemmenu kcmkio krunapplet kcmhtmlsearch kcmfonts libtaskbar useraccount knetattach kcmkonsole appletproxy dockbarextension kcmkonq kio_nntp kwriteconfig kio_ldap konsole kstart klipper kcmspellchecking kcmkurifilt kdepasswd clockapplet mediaapplet kdialog kcmlayout kpager twin_clients kdebugdialog kcmnotify kio_nfs kcmprintmgr ksystemtrayapplet kcmxinerama kreadconfig kay libkickermenu_remotemenu lockout kcmtwindecoration kxkb kprinter libtaskmanager kio_system trashapplet kcmcrypto kcmnic privacy libkickermenu_tdeprint kscreensaver libkonq libkickermenu_recentdocs kmenuedit kio_trash kio_floppy krandr khotkeys kcmkclock kio_man ksystraycmd kcmsmartcard twin libkicker khelpcenter ksmserver kgreet_winbind drkonqi twin_lib kio_settings ksysguard kfontinst kcmscreensaver konqueror tdesu kcmsmserver kcmcolors kcminput kcmlocale kio_print kcmstyle kcmkeys kcmioslaveinfo kfmclient kfindpart kio_mac kio_smb kcmmedia naughtyapplet kcmkwm htmlsearch kcmcss kcmusb kcmperformance kio_thumbnail kcmarts libkickermenu_prefmenu joystick kdmconfig kcmaccess kcmkonqhtml quicklauncher kcmsamba tdeprint_part kio_smtp ; do \ + @for base in kio_sftp kate kjobviewer libkickermenu_konsole kcmkicker nsplugin display extensionproxy kdcop kcmbackground kstyle_keramik_config kcmlaunch kcminfo kcmtwinrules kasbarextension khtmlkttsd libdmctl ksplashthemes kgreet_classic kcontrol kmenuapplet kio_tar kcmview1394 kcmbell kcmcomponentchooser tdmgreet kdesktop kpersonalizer ksplash kcmaccessibility kminipagerapplet kcmkded kio_remote kio_home tdeprintfax kcmicons filetypes kcmenergy kappfinder kthememanager kcmtaskbar kcmcgi kio_media libkickermenu_tom kio_finger ktip kaccess kio_pop3 tdesud kio_fish kicker kcmkdnssd krdb libkickermenu_systemmenu kcmkio krunapplet kcmhtmlsearch kcmfonts libtaskbar useraccount knetattach kcmkonsole appletproxy dockbarextension kcmkonq kio_nntp kwriteconfig kio_ldap konsole kstart klipper kcmspellchecking kcmkurifilt kdepasswd clockapplet mediaapplet kdialog kcmlayout kpager twin_clients kdebugdialog kcmnotify kio_nfs kcmprintmgr ksystemtrayapplet kcmxinerama kreadconfig kay libkickermenu_remotemenu lockout kcmtwindecoration kxkb kprinter libtaskmanager kio_system trashapplet kcmcrypto kcmnic privacy libkickermenu_tdeprint kscreensaver libkonq libkickermenu_recentdocs kmenuedit kio_trash kio_floppy krandr khotkeys kcmkclock kio_man ksystraycmd kcmsmartcard twin libkicker khelpcenter ksmserver kgreet_winbind drkonqi twin_lib kio_settings ksysguard kfontinst kcmscreensaver konqueror tdesu kcmsmserver kcmcolors kcminput kcmlocale kio_print kcmstyle kcmkeys kcmioslaveinfo kfmclient kfindpart kio_mac kio_smb kcmmedia naughtyapplet kcmkwm htmlsearch kcmcss kcmusb kcmperformance kio_thumbnail kcmarts libkickermenu_prefmenu joystick tdmconfig kcmaccess kcmkonqhtml quicklauncher kcmsamba tdeprint_part kio_smtp ; do \ echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ @@ -1042,7 +1042,7 @@ uninstall-nls: rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmview1394.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmbell.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmcomponentchooser.mo - rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kdmgreet.mo + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/tdmgreet.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kdesktop.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kpersonalizer.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/ksplash.mo @@ -1165,7 +1165,7 @@ uninstall-nls: rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmarts.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libkickermenu_prefmenu.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/joystick.mo - rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kdmconfig.mo + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/tdmconfig.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmaccess.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmkonqhtml.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/quicklauncher.mo diff --git a/tde-i18n-en_GB/messages/tdebase/kcmfonts.po b/tde-i18n-en_GB/messages/tdebase/kcmfonts.po index 6f73110b3a9..5e7e9409e54 100644 --- a/tde-i18n-en_GB/messages/tdebase/kcmfonts.po +++ b/tde-i18n-en_GB/messages/tdebase/kcmfonts.po @@ -185,7 +185,7 @@ msgid "" "

The use of this option is generally discouraged. For selecting proper DPI " "value a better option is explicitly configuring it for the whole X server if " "possible (e.g. DisplaySize in xorg.conf or adding -dpi value " -"to ServerLocalArgs= in $TDEDIR/share/config/kdm/kdmrc). When fonts do not " +"to ServerLocalArgs= in $TDEDIR/share/config/tdm/tdmrc). When fonts do not " "render properly with real DPI value better fonts should be used or " "configuration of font hinting should be checked.

" msgstr "" diff --git a/tde-i18n-en_GB/messages/tdebase/kcmsmserver.po b/tde-i18n-en_GB/messages/tdebase/kcmsmserver.po index 5be40c74907..701b6d6ca3b 100644 --- a/tde-i18n-en_GB/messages/tdebase/kcmsmserver.po +++ b/tde-i18n-en_GB/messages/tdebase/kcmsmserver.po @@ -122,10 +122,10 @@ msgstr "Default Shutdown Option" #, no-c-format msgid "" "Here you can choose what should happen by default when you log out. This only " -"has meaning, if you logged in through KDM." +"has meaning, if you logged in through TDM." msgstr "" "Here you can choose what should happen by default when you log out. This only " -"has meaning, if you logged in through KDM." +"has meaning, if you logged in through TDM." #. i18n: file smserverconfigdlg.ui line 130 #: rc.cpp:43 diff --git a/tde-i18n-en_GB/messages/tdebase/kdmconfig.po b/tde-i18n-en_GB/messages/tdebase/kdmconfig.po index e12060b9573..0ac0e2b8fc5 100644 --- a/tde-i18n-en_GB/messages/tdebase/kdmconfig.po +++ b/tde-i18n-en_GB/messages/tdebase/kdmconfig.po @@ -1,11 +1,11 @@ -# translation of kdmconfig.po to British English +# translation of tdmconfig.po to British English # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # Malcolm Hunter , 2003, 2004, 2005. # Andrew Coles , 2004, 2005. # msgid "" msgstr "" -"Project-Id-Version: kdmconfig\n" +"Project-Id-Version: tdmconfig\n" "POT-Creation-Date: 2007-11-17 01:14+0100\n" "PO-Revision-Date: 2005-11-04 23:43+0000\n" "Last-Translator: Malcolm Hunter \n" @@ -21,25 +21,25 @@ msgstr "E&nable background" #: background.cpp:49 msgid "" -"If this is checked, KDM will use the settings below for the background. If it " +"If this is checked, TDM will use the settings below for the background. If it " "is disabled, you have to look after the background yourself. This is done by " "running some program (possibly xsetroot) in the script specified in the Setup= " -"option in kdmrc (usually Xsetup)." +"option in tdmrc (usually Xsetup)." msgstr "" -"If this is ticked, KDM will use the settings below for the background. If it is " +"If this is ticked, TDM will use the settings below for the background. If it is " "disabled, you have to look after the background yourself. This is done by " "running some program (possibly xsetroot) in the script specified in the Setup= " -"option in kdmrc (usually Xsetup)." +"option in tdmrc (usually Xsetup)." -#: kdm-appear.cpp:71 +#: tdm-appear.cpp:71 msgid "&Greeting:" msgstr "&Greeting:" -#: kdm-appear.cpp:76 +#: tdm-appear.cpp:76 msgid "" -"This is the \"headline\" for KDM's login window. You may want to put some nice " +"This is the \"headline\" for TDM's login window. You may want to put some nice " "greeting or information about the operating system here." -"

KDM will substitute the following character pairs with the respective " +"

TDM will substitute the following character pairs with the respective " "contents:" "
" "

    " @@ -51,9 +51,9 @@ msgid "" "
  • %m -> the machine (hardware) type
  • " "
  • %% -> a single %
" msgstr "" -"This is the \"headline\" for KDM's login window. You may want to put some nice " +"This is the \"headline\" for TDM's login window. You may want to put some nice " "greeting or information about the operating system here." -"

KDM will substitute the following character pairs with the respective " +"

TDM will substitute the following character pairs with the respective " "contents:" "
" "

    " @@ -65,55 +65,55 @@ msgstr "" "
  • %m -> the machine (hardware) type
  • " "
  • %% -> a single %
" -#: kdm-appear.cpp:95 +#: tdm-appear.cpp:95 msgid "Logo area:" msgstr "Logo area:" -#: kdm-appear.cpp:99 +#: tdm-appear.cpp:99 msgid "" "_: logo area\n" "&None" msgstr "&None" -#: kdm-appear.cpp:100 +#: tdm-appear.cpp:100 msgid "Show cloc&k" msgstr "Show cloc&k" -#: kdm-appear.cpp:101 +#: tdm-appear.cpp:101 msgid "Sho&w logo" msgstr "Sho&w logo" -#: kdm-appear.cpp:113 +#: tdm-appear.cpp:113 msgid "" "You can choose to display a custom logo (see below), a clock or no logo at all." msgstr "" "You can choose to display a custom logo (see below), a clock or no logo at all." -#: kdm-appear.cpp:119 +#: tdm-appear.cpp:119 msgid "&Logo:" msgstr "&Logo:" -#: kdm-appear.cpp:129 +#: tdm-appear.cpp:129 msgid "" -"Click here to choose an image that KDM will display. You can also drag and drop " +"Click here to choose an image that TDM will display. You can also drag and drop " "an image onto this button (e.g. from Konqueror)." msgstr "" -"Click here to choose an image that KDM will display. You can also drag and drop " +"Click here to choose an image that TDM will display. You can also drag and drop " "an image onto this button (e.g. from Konqueror)." -#: kdm-appear.cpp:141 +#: tdm-appear.cpp:141 msgid "Position:" msgstr "Position:" -#: kdm-appear.cpp:144 +#: tdm-appear.cpp:144 msgid "&X:" msgstr "&X:" -#: kdm-appear.cpp:151 +#: tdm-appear.cpp:151 msgid "&Y:" msgstr "&Y:" -#: kdm-appear.cpp:158 +#: tdm-appear.cpp:158 msgid "" "Here you specify the relative coordinates (in percent) of the login dialog's " "center." @@ -121,70 +121,70 @@ msgstr "" "Here you specify the relative coordinates (in percent) of the login dialogue's " "centre." -#: kdm-appear.cpp:173 kdm-appear.cpp:186 kdm-users.cpp:84 +#: tdm-appear.cpp:173 tdm-appear.cpp:186 tdm-users.cpp:84 msgid "" msgstr "" -#: kdm-appear.cpp:176 +#: tdm-appear.cpp:176 msgid "GUI s&tyle:" msgstr "GUI s&tyle:" -#: kdm-appear.cpp:180 -msgid "You can choose a basic GUI style here that will be used by KDM only." -msgstr "You can choose a basic GUI style here that will be used by KDM only." +#: tdm-appear.cpp:180 +msgid "You can choose a basic GUI style here that will be used by TDM only." +msgstr "You can choose a basic GUI style here that will be used by TDM only." -#: kdm-appear.cpp:189 +#: tdm-appear.cpp:189 msgid "&Color scheme:" msgstr "&Colour scheme:" -#: kdm-appear.cpp:193 -msgid "You can choose a basic Color Scheme here that will be used by KDM only." +#: tdm-appear.cpp:193 +msgid "You can choose a basic Color Scheme here that will be used by TDM only." msgstr "" -"You can choose a basic Colour Scheme here that will be used by KDM only." +"You can choose a basic Colour Scheme here that will be used by TDM only." -#: kdm-appear.cpp:199 +#: tdm-appear.cpp:199 msgid "No Echo" msgstr "No Echo" -#: kdm-appear.cpp:200 +#: tdm-appear.cpp:200 msgid "One Star" msgstr "One Star" -#: kdm-appear.cpp:201 +#: tdm-appear.cpp:201 msgid "Three Stars" msgstr "Three Stars" -#: kdm-appear.cpp:202 +#: tdm-appear.cpp:202 msgid "Echo &mode:" msgstr "Echo &mode:" -#: kdm-appear.cpp:206 +#: tdm-appear.cpp:206 msgid "" -"You can choose whether and how KDM shows your password when you type it." +"You can choose whether and how TDM shows your password when you type it." msgstr "" -"You can choose how and whether KDM shows your password when you type it." +"You can choose how and whether TDM shows your password when you type it." -#: kdm-appear.cpp:212 +#: tdm-appear.cpp:212 msgid "Locale" msgstr "Locale" -#: kdm-appear.cpp:218 +#: tdm-appear.cpp:218 msgid "Languag&e:" msgstr "Languag&e:" -#: kdm-appear.cpp:223 +#: tdm-appear.cpp:223 msgid "" -"Here you can choose the language used by KDM. This setting does not affect a " +"Here you can choose the language used by TDM. This setting does not affect a " "user's personal settings; that will take effect after login." msgstr "" -"Here you can choose the language used by KDM. This setting does not affect a " +"Here you can choose the language used by TDM. This setting does not affect a " "user's personal settings; that will take effect after login." -#: kdm-appear.cpp:264 +#: tdm-appear.cpp:264 msgid "without name" msgstr "without name" -#: kdm-appear.cpp:405 +#: tdm-appear.cpp:405 msgid "" "There was an error loading the image:\n" "%1\n" @@ -194,28 +194,28 @@ msgstr "" "%1\n" "It will not be saved." -#: kdm-appear.cpp:445 kdm-appear.cpp:488 +#: tdm-appear.cpp:445 tdm-appear.cpp:488 #, c-format msgid "Welcome to %s at %n" msgstr "Welcome to %s at %n" -#: kdm-appear.cpp:504 +#: tdm-appear.cpp:504 msgid "" -"

KDM - Appearance

Here you can configure the basic appearance of the " -"KDM login manager, i.e. a greeting string, an icon etc." -"

For further refinement of KDM's appearance, see the \"Font\" and " +"

TDM - Appearance

Here you can configure the basic appearance of the " +"TDM login manager, i.e. a greeting string, an icon etc." +"

For further refinement of TDM's appearance, see the \"Font\" and " "\"Background\" tabs." msgstr "" -"

KDM - Appearance

Here you can configure the basic appearance of the " -"KDM login manager, i.e. a greeting string, an icon etc." -"

For further refinement of KDM's appearance, see the \"Font\" and " +"

TDM - Appearance

Here you can configure the basic appearance of the " +"TDM login manager, i.e. a greeting string, an icon etc." +"

For further refinement of TDM's appearance, see the \"Font\" and " "\"Background\" tabs." -#: kdm-font.cpp:46 +#: tdm-font.cpp:46 msgid "&General:" msgstr "&General:" -#: kdm-font.cpp:49 +#: tdm-font.cpp:49 msgid "" "This changes the font which is used for all the text in the login manager " "except for the greeting and failure messages." @@ -223,29 +223,29 @@ msgstr "" "This changes the font which is used for all the text in the login manager " "except for the greeting and failure messages." -#: kdm-font.cpp:54 +#: tdm-font.cpp:54 msgid "&Failures:" msgstr "&Failures:" -#: kdm-font.cpp:57 +#: tdm-font.cpp:57 msgid "" "This changes the font which is used for failure messages in the login manager." msgstr "" "This changes the font which is used for failure messages in the login manager." -#: kdm-font.cpp:62 +#: tdm-font.cpp:62 msgid "Gree&ting:" msgstr "Gree&ting:" -#: kdm-font.cpp:65 +#: tdm-font.cpp:65 msgid "This changes the font which is used for the login manager's greeting." msgstr "This changes the font which is used for the login manager's greeting." -#: kdm-font.cpp:70 +#: tdm-font.cpp:70 msgid "Use anti-aliasing for fonts" msgstr "Use anti-aliasing for fonts" -#: kdm-font.cpp:71 +#: tdm-font.cpp:71 msgid "" "If you check this box and your X-Server has the Xft extension, fonts will be " "antialiased (smoothed) in the login dialog." @@ -253,154 +253,154 @@ msgstr "" "If you tick this box and your X-Server has the Xft extension, fonts will be " "antialiased (smoothed) in the login dialogue." -#: kdm-shut.cpp:49 +#: tdm-shut.cpp:49 msgid "Allow Shutdown" msgstr "Allow Shutdown" -#: kdm-shut.cpp:52 +#: tdm-shut.cpp:52 msgid "&Local:" msgstr "&Local:" -#: kdm-shut.cpp:53 kdm-shut.cpp:59 +#: tdm-shut.cpp:53 tdm-shut.cpp:59 msgid "Everybody" msgstr "Everybody" -#: kdm-shut.cpp:54 kdm-shut.cpp:60 +#: tdm-shut.cpp:54 tdm-shut.cpp:60 msgid "Only Root" msgstr "Only Root" -#: kdm-shut.cpp:55 kdm-shut.cpp:61 +#: tdm-shut.cpp:55 tdm-shut.cpp:61 msgid "Nobody" msgstr "Nobody" -#: kdm-shut.cpp:58 +#: tdm-shut.cpp:58 msgid "&Remote:" msgstr "&Remote:" -#: kdm-shut.cpp:63 +#: tdm-shut.cpp:63 msgid "" -"Here you can select who is allowed to shutdown the computer using KDM. You can " +"Here you can select who is allowed to shutdown the computer using TDM. You can " "specify different values for local (console) and remote displays. Possible " "values are:" "

    " -"
  • Everybody: everybody can shutdown the computer using KDM
  • " -"
  • Only root: KDM will only allow shutdown after the user has entered " +"
  • Everybody: everybody can shutdown the computer using TDM
  • " +"
  • Only root: TDM will only allow shutdown after the user has entered " "the root password
  • " -"
  • Nobody: nobody can shutdown the computer using KDM
" +"
  • Nobody: nobody can shutdown the computer using TDM
  • " msgstr "" -"Here you can select who is allowed to shutdown the computer using KDM. You can " +"Here you can select who is allowed to shutdown the computer using TDM. You can " "specify different values for local (console) and remote displays. Possible " "values are:" "
      " -"
    • Everybody: everybody can shutdown the computer using KDM
    • " -"
    • Only root: KDM will only allow shutdown after the user has entered " +"
    • Everybody: everybody can shutdown the computer using TDM
    • " +"
    • Only root: TDM will only allow shutdown after the user has entered " "the root password
    • " -"
    • Nobody: nobody can shutdown the computer using KDM
    " +"
  • Nobody: nobody can shutdown the computer using TDM
  • " -#: kdm-shut.cpp:71 +#: tdm-shut.cpp:71 msgid "Commands" msgstr "Commands" -#: kdm-shut.cpp:74 +#: tdm-shut.cpp:74 msgid "H&alt:" msgstr "H&alt:" -#: kdm-shut.cpp:77 +#: tdm-shut.cpp:77 msgid "Command to initiate the system halt. Typical value: /sbin/halt" msgstr "Command to initiate the system halt. Typical value: /sbin/halt" -#: kdm-shut.cpp:82 +#: tdm-shut.cpp:82 msgid "Reb&oot:" msgstr "Reb&oot:" -#: kdm-shut.cpp:85 +#: tdm-shut.cpp:85 msgid "Command to initiate the system reboot. Typical value: /sbin/reboot" msgstr "Command to initiate the system reboot. Typical value: /sbin/reboot" -#: kdm-shut.cpp:93 +#: tdm-shut.cpp:93 msgid "" "_: boot manager\n" "None" msgstr "None" -#: kdm-shut.cpp:94 +#: tdm-shut.cpp:94 msgid "Grub" msgstr "Grub" -#: kdm-shut.cpp:96 +#: tdm-shut.cpp:96 msgid "Lilo" msgstr "Lilo" -#: kdm-shut.cpp:98 +#: tdm-shut.cpp:98 msgid "Boot manager:" msgstr "Boot manager:" -#: kdm-shut.cpp:100 +#: tdm-shut.cpp:100 msgid "Enable boot options in the \"Shutdown...\" dialog." msgstr "Enable boot options in the \"Shutdown...\" dialogue." -#: kdm-users.cpp:81 +#: tdm-users.cpp:81 #, c-format msgid "Unable to create folder %1" msgstr "Unable to create folder %1" -#: kdm-users.cpp:88 +#: tdm-users.cpp:88 msgid "System U&IDs" msgstr "System U&IDs" -#: kdm-users.cpp:89 +#: tdm-users.cpp:89 msgid "" "Users with a UID (numerical user identification) outside this range will not be " -"listed by KDM and this setup dialog. Note that users with the UID 0 (typically " +"listed by TDM and this setup dialog. Note that users with the UID 0 (typically " "root) are not affected by this and must be explicitly hidden in \"Not hidden\" " "mode." msgstr "" "Users with a UID (numerical user identification) outside this range will not be " -"listed by KDM and this setup dialogue. Note that users with the UID 0 " +"listed by TDM and this setup dialogue. Note that users with the UID 0 " "(typically root) are not affected by this and must be explicitly hidden in " "\"Not hidden\" mode." -#: kdm-users.cpp:94 +#: tdm-users.cpp:94 msgid "Below:" msgstr "Below:" -#: kdm-users.cpp:101 +#: tdm-users.cpp:101 msgid "Above:" msgstr "Above:" -#: kdm-users.cpp:109 +#: tdm-users.cpp:109 msgid "Users" msgstr "Users" -#: kdm-users.cpp:112 +#: tdm-users.cpp:112 msgid "Show list" msgstr "Show list" -#: kdm-users.cpp:113 +#: tdm-users.cpp:113 msgid "" -"If this option is checked, KDM will show a list of users, so users can click on " +"If this option is checked, TDM will show a list of users, so users can click on " "their name or image rather than typing in their login." msgstr "" -"If this option is ticked, KDM will show a list of users, so users can click on " +"If this option is ticked, TDM will show a list of users, so users can click on " "their name or image rather than typing in their login." -#: kdm-users.cpp:115 +#: tdm-users.cpp:115 msgid "Autocompletion" msgstr "Autocompletion" -#: kdm-users.cpp:116 +#: tdm-users.cpp:116 msgid "" -"If this option is checked, KDM will automatically complete user names while " +"If this option is checked, TDM will automatically complete user names while " "they are typed in the line edit." msgstr "" -"If this option is ticked, KDM will automatically complete user names while they " +"If this option is ticked, TDM will automatically complete user names while they " "are typed in the line edit." -#: kdm-users.cpp:118 +#: tdm-users.cpp:118 msgid "Inverse selection" msgstr "Inverse selection" -#: kdm-users.cpp:119 +#: tdm-users.cpp:119 msgid "" "This option specifies how the users for \"Show list\" and \"Autocompletion\" " "are selected in the \"Select users and groups\" list: If not checked, select " @@ -412,97 +412,97 @@ msgstr "" "only the ticked users. If ticked, select all non-system users, except the " "ticked ones." -#: kdm-users.cpp:123 +#: tdm-users.cpp:123 msgid "Sor&t users" msgstr "Sor&t users" -#: kdm-users.cpp:125 +#: tdm-users.cpp:125 msgid "" -"If this is checked, KDM will alphabetically sort the user list. Otherwise users " +"If this is checked, TDM will alphabetically sort the user list. Otherwise users " "are listed in the order they appear in the password file." msgstr "" -"If this is ticked, KDM will alphabetically sort the user list. Otherwise users " +"If this is ticked, TDM will alphabetically sort the user list. Otherwise users " "are listed in the order they appear in the password file." -#: kdm-users.cpp:129 +#: tdm-users.cpp:129 msgid "S&elect users and groups:" msgstr "S&elect users and groups:" -#: kdm-users.cpp:131 +#: tdm-users.cpp:131 msgid "Selected Users" msgstr "Selected Users" -#: kdm-users.cpp:133 +#: tdm-users.cpp:133 msgid "" -"KDM will show all checked users. Entries denoted with '@' are user groups. " +"TDM will show all checked users. Entries denoted with '@' are user groups. " "Checking a group is like checking all users in that group." msgstr "" -"KDM will show all ticked users. Entries denoted with '@' are user groups. " +"TDM will show all ticked users. Entries denoted with '@' are user groups. " "Ticking a group is like ticking all users in that group." -#: kdm-users.cpp:140 +#: tdm-users.cpp:140 msgid "Hidden Users" msgstr "Hidden Users" -#: kdm-users.cpp:142 +#: tdm-users.cpp:142 msgid "" -"KDM will show all non-checked non-system users. Entries denoted with '@' are " +"TDM will show all non-checked non-system users. Entries denoted with '@' are " "user groups. Checking a group is like checking all users in that group." msgstr "" -"KDM will show all non-ticked non-system users. Entries denoted with '@' are " +"TDM will show all non-ticked non-system users. Entries denoted with '@' are " "user groups. Ticking a group is like ticking all users in that group." -#: kdm-users.cpp:149 +#: tdm-users.cpp:149 msgid "User Image Source" msgstr "User Image Source" -#: kdm-users.cpp:150 +#: tdm-users.cpp:150 msgid "" -"Here you can specify where KDM will obtain the images that represent users. " +"Here you can specify where TDM will obtain the images that represent users. " "\"Admin\" represents the global folder; these are the pictures you can set " -"below. \"User\" means that KDM should read the user's $HOME/.face.icon file. " +"below. \"User\" means that TDM should read the user's $HOME/.face.icon file. " "The two selections in the middle define the order of preference if both sources " "are available." msgstr "" -"Here you can specify where KDM will obtain the images that represent users. " +"Here you can specify where TDM will obtain the images that represent users. " "\"Admin\" represents the global folder; these are the pictures you can set " -"below. \"User\" means that KDM should read the user's $HOME/.face.icon file. " +"below. \"User\" means that TDM should read the user's $HOME/.face.icon file. " "The two selections in the middle define the order of preference if both sources " "are available." -#: kdm-users.cpp:156 +#: tdm-users.cpp:156 msgid "Admin" msgstr "Admin" -#: kdm-users.cpp:157 +#: tdm-users.cpp:157 msgid "Admin, user" msgstr "Admin, user" -#: kdm-users.cpp:158 +#: tdm-users.cpp:158 msgid "User, admin" msgstr "User, admin" -#: kdm-users.cpp:159 +#: tdm-users.cpp:159 msgid "User" msgstr "User" -#: kdm-users.cpp:161 +#: tdm-users.cpp:161 msgid "User Images" msgstr "User Images" -#: kdm-users.cpp:164 +#: tdm-users.cpp:164 msgid "The user the image below belongs to." msgstr "The user the image below belongs to." -#: kdm-users.cpp:167 +#: tdm-users.cpp:167 msgid "User:" msgstr "User:" -#: kdm-users.cpp:175 +#: tdm-users.cpp:175 msgid "Click or drop an image here" msgstr "Click or drop an image here" -#: kdm-users.cpp:176 +#: tdm-users.cpp:176 msgid "" "Here you can see the image assigned to the user selected in the combo box " "above. Click on the image button to select from a list of images or drag and " @@ -512,21 +512,21 @@ msgstr "" "above. Click on the image button to select from a list of images or drag and " "drop your own image on to the button (e.g. from Konqueror)." -#: kdm-users.cpp:178 +#: tdm-users.cpp:178 msgid "Unset" msgstr "Unset" -#: kdm-users.cpp:179 +#: tdm-users.cpp:179 msgid "" -"Click this button to make KDM use the default image for the selected user." +"Click this button to make TDM use the default image for the selected user." msgstr "" -"Click this button to make KDM use the default image for the selected user." +"Click this button to make TDM use the default image for the selected user." -#: kdm-users.cpp:276 +#: tdm-users.cpp:276 msgid "Save image as default image?" msgstr "Save image as default image?" -#: kdm-users.cpp:284 +#: tdm-users.cpp:284 #, c-format msgid "" "There was an error loading the image\n" @@ -535,7 +535,7 @@ msgstr "" "There was an error loading the image\n" "%1" -#: kdm-users.cpp:293 +#: tdm-users.cpp:293 #, c-format msgid "" "There was an error saving the image:\n" @@ -544,11 +544,11 @@ msgstr "" "There was an error saving the image:\n" "%1" -#: kdm-users.cpp:308 +#: tdm-users.cpp:308 msgid "Choose Image" msgstr "Choose Image" -#: kdm-conv.cpp:47 +#: tdm-conv.cpp:47 msgid "" "" "
    Attention!" @@ -558,43 +558,43 @@ msgstr "" "
    Attention!" "
    Read help!
    " -#: kdm-conv.cpp:51 +#: tdm-conv.cpp:51 msgid "Enable Au&to-Login" msgstr "Enable Au&to-Login" -#: kdm-conv.cpp:55 +#: tdm-conv.cpp:55 msgid "" -"Turn on the auto-login feature. This applies only to KDM's graphical login. " +"Turn on the auto-login feature. This applies only to TDM's graphical login. " "Think twice before enabling this!" msgstr "" -"Turn on the auto-login feature. This applies only to KDM's graphical login. " +"Turn on the auto-login feature. This applies only to TDM's graphical login. " "Think twice before enabling this!" -#: kdm-conv.cpp:62 +#: tdm-conv.cpp:62 msgid "Use&r:" msgstr "Use&r:" -#: kdm-conv.cpp:68 +#: tdm-conv.cpp:68 msgid "Select the user to be logged in automatically." msgstr "Select the user to be logged in automatically." -#: kdm-conv.cpp:72 +#: tdm-conv.cpp:72 msgid "" "_: delay\n" "none" msgstr "none" -#: kdm-conv.cpp:73 +#: tdm-conv.cpp:73 msgid "" "_: seconds\n" " s" msgstr " s" -#: kdm-conv.cpp:74 +#: tdm-conv.cpp:74 msgid "D&elay:" msgstr "D&elay:" -#: kdm-conv.cpp:78 +#: tdm-conv.cpp:78 msgid "" "The delay (in seconds) before the automatic login kicks in. This feature is " "also known as \"timed login\"." @@ -602,23 +602,23 @@ msgstr "" "The delay (in seconds) before the automatic login kicks in. This feature is " "also known as \"timed login\"." -#: kdm-conv.cpp:82 +#: tdm-conv.cpp:82 msgid "P&ersistent" msgstr "P&ersistent" -#: kdm-conv.cpp:84 +#: tdm-conv.cpp:84 msgid "" -"Normally, automatic login is performed only when KDM starts up. If this is " +"Normally, automatic login is performed only when TDM starts up. If this is " "checked, automatic login will kick in after finishing a session as well." msgstr "" -"Normally, automatic login is performed only when KDM starts up. If this is " +"Normally, automatic login is performed only when TDM starts up. If this is " "checked, automatic login will kick in after finishing a session as well." -#: kdm-conv.cpp:87 +#: tdm-conv.cpp:87 msgid "Loc&k session" msgstr "Loc&k session" -#: kdm-conv.cpp:89 +#: tdm-conv.cpp:89 msgid "" "If checked, the automatically started session will be locked immediately " "(provided it is a KDE session). This can be used to obtain a super-fast login " @@ -628,21 +628,21 @@ msgstr "" "(provided it is a KDE session). This can be used to obtain a super-fast login " "restricted to one user." -#: kdm-conv.cpp:94 +#: tdm-conv.cpp:94 msgid "Preselect User" msgstr "Preselect User" -#: kdm-conv.cpp:99 +#: tdm-conv.cpp:99 msgid "" "_: preselected user\n" "&None" msgstr "&None" -#: kdm-conv.cpp:100 +#: tdm-conv.cpp:100 msgid "Prev&ious" msgstr "Prev&ious" -#: kdm-conv.cpp:101 +#: tdm-conv.cpp:101 msgid "" "Preselect the user that logged in previously. Use this if this computer is " "usually used several consecutive times by one user." @@ -650,11 +650,11 @@ msgstr "" "Preselect the user that logged in previously. Use this if this computer is " "usually used several consecutive times by one user." -#: kdm-conv.cpp:103 +#: tdm-conv.cpp:103 msgid "Specif&y" msgstr "Specif&y" -#: kdm-conv.cpp:104 +#: tdm-conv.cpp:104 msgid "" "Preselect the user specified in the combo box below. Use this if this computer " "is predominantly used by a certain user." @@ -662,11 +662,11 @@ msgstr "" "Preselect the user specified in the combo box below. Use this if this computer " "is predominantly used by a certain user." -#: kdm-conv.cpp:108 +#: tdm-conv.cpp:108 msgid "Us&er:" msgstr "Us&er:" -#: kdm-conv.cpp:110 +#: tdm-conv.cpp:110 msgid "" "Select the user to be preselected for login. This box is editable, so you can " "specify an arbitrary non-existent user to mislead possible attackers." @@ -674,39 +674,39 @@ msgstr "" "Select the user to be preselected for login. This box is editable, so you can " "specify an arbitrary non-existent user to mislead possible attackers." -#: kdm-conv.cpp:119 +#: tdm-conv.cpp:119 msgid "Focus pass&word" msgstr "Focus pass&word" -#: kdm-conv.cpp:120 +#: tdm-conv.cpp:120 msgid "" -"When this option is on, KDM will place the cursor in the password field instead " +"When this option is on, TDM will place the cursor in the password field instead " "of the user field after preselecting a user. Use this to save one key press per " "login, if the preselection usually does not need to be changed." msgstr "" -"When this option is on, KDM will place the cursor in the password field instead " +"When this option is on, TDM will place the cursor in the password field instead " "of the user field after preselecting a user. Use this to save one key press per " "login, if the preselection usually does not need to be changed." -#: kdm-conv.cpp:126 +#: tdm-conv.cpp:126 msgid "Enable Password-&Less Logins" msgstr "Enable Password-&Less Logins" -#: kdm-conv.cpp:129 +#: tdm-conv.cpp:129 msgid "" "When this option is checked, the checked users from the list below will be " -"allowed to log in without entering their password. This applies only to KDM's " +"allowed to log in without entering their password. This applies only to TDM's " "graphical login. Think twice before enabling this!" msgstr "" "When this option is ticked, the ticked users from the list below will be " -"allowed to log in without entering their password. This applies only to KDM's " +"allowed to log in without entering their password. This applies only to TDM's " "graphical login. Think twice before enabling this!" -#: kdm-conv.cpp:136 +#: tdm-conv.cpp:136 msgid "No password re&quired for:" msgstr "No password re&quired for:" -#: kdm-conv.cpp:142 +#: tdm-conv.cpp:142 msgid "" "Check all users you want to allow a password-less login for. Entries denoted " "with '@' are user groups. Checking a group is like checking all users in that " @@ -716,11 +716,11 @@ msgstr "" "with '@' are user groups. Ticking a group is like ticking all users in that " "group." -#: kdm-conv.cpp:149 +#: tdm-conv.cpp:149 msgid "Automatically log in again after &X server crash" msgstr "Automatically log in again after &X server crash" -#: kdm-conv.cpp:150 +#: tdm-conv.cpp:150 msgid "" "When this option is on, a user will be logged in again automatically when their " "session is interrupted by an X server crash; note that this can open a security " @@ -743,16 +743,16 @@ msgstr "" "%2" #: main.cpp:88 -msgid "kcmkdm" -msgstr "kcmkdm" +msgid "kcmtdm" +msgstr "kcmtdm" #: main.cpp:88 msgid "KDE Login Manager Config Module" msgstr "KDE Login Manager Config Module" #: main.cpp:90 -msgid "(c) 1996 - 2005 The KDM Authors" -msgstr "(c) 1996 - 2005 The KDM Authors" +msgid "(c) 1996 - 2005 The TDM Authors" +msgstr "(c) 1996 - 2005 The TDM Authors" #: main.cpp:92 msgid "Original author" diff --git a/tde-i18n-en_GB/messages/tdebase/kdmgreet.po b/tde-i18n-en_GB/messages/tdebase/kdmgreet.po index 8e0686a440d..7aed58fcab5 100644 --- a/tde-i18n-en_GB/messages/tdebase/kdmgreet.po +++ b/tde-i18n-en_GB/messages/tdebase/kdmgreet.po @@ -1,11 +1,11 @@ -# translation of kdmgreet.po to British English +# translation of tdmgreet.po to British English # Copyright (C) 2002,2003, 2004, 2005 Free Software Foundation, Inc. # Malcolm Hunter , 2002,2003, 2004, 2005. # Andrew Coles , 2004, 2005. # msgid "" msgstr "" -"Project-Id-Version: kdmgreet\n" +"Project-Id-Version: tdmgreet\n" "POT-Creation-Date: 2007-12-08 01:14+0100\n" "PO-Revision-Date: 2005-12-26 02:03+0000\n" "Last-Translator: Malcolm Hunter \n" @@ -15,11 +15,11 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.2\n" -#: kdmconfig.cpp:139 -msgid "[fix kdmrc!]" -msgstr "[fix kdmrc!]" +#: tdmconfig.cpp:139 +msgid "[fix tdmrc!]" +msgstr "[fix tdmrc!]" -#: kdmconfig.cpp:154 +#: tdmconfig.cpp:154 msgid "" "_n: %1: TTY login\n" "%1: %n TTY logins" @@ -27,17 +27,17 @@ msgstr "" "%1: TTY login\n" "%1: %n TTY logins" -#: kdmconfig.cpp:165 +#: tdmconfig.cpp:165 msgid "Unused" msgstr "Unused" -#: kdmconfig.cpp:167 +#: tdmconfig.cpp:167 msgid "" "_: user: session type\n" "%1: %2" msgstr "%1: %2" -#: kdmconfig.cpp:169 +#: tdmconfig.cpp:169 #, c-format msgid "" "_: ... host\n" @@ -45,8 +45,8 @@ msgid "" msgstr "X login on %1" #: krootimage.cpp:37 -msgid "Fancy desktop background for kdm" -msgstr "Fancy desktop background for kdm" +msgid "Fancy desktop background for tdm" +msgstr "Fancy desktop background for tdm" #: krootimage.cpp:42 msgid "Name of the configuration file" @@ -244,11 +244,11 @@ msgstr "Your account has expired; please contact your system administrator." #: kgverify.cpp:456 msgid "" "A critical error occurred.\n" -"Please look at KDM's logfile(s) for more information\n" +"Please look at TDM's logfile(s) for more information\n" "or contact your system administrator." msgstr "" "A critical error occurred.\n" -"Please look at KDM's logfile(s) for more information\n" +"Please look at TDM's logfile(s) for more information\n" "or contact your system administrator." #: kgverify.cpp:482 @@ -316,113 +316,113 @@ msgstr "Theme not usable with authentication method '%1'." msgid "Changing authentication token" msgstr "Changing authentication token" -#: kdmshutdown.cpp:92 +#: tdmshutdown.cpp:92 msgid "Root authorization required." msgstr "Root authorisation required." -#: kdmshutdown.cpp:123 kdmshutdown.cpp:516 +#: tdmshutdown.cpp:123 tdmshutdown.cpp:516 msgid "&Schedule..." msgstr "&Schedule..." -#: kdmshutdown.cpp:246 +#: tdmshutdown.cpp:246 msgid "Shutdown Type" msgstr "Shutdown Type" -#: kdmshutdown.cpp:250 +#: tdmshutdown.cpp:250 msgid "&Turn off computer" msgstr "&Turn off computer" -#: kdmshutdown.cpp:254 +#: tdmshutdown.cpp:254 msgid "&Restart computer" msgstr "&Restart computer" -#: kdmshutdown.cpp:282 +#: tdmshutdown.cpp:282 msgid "Scheduling" msgstr "Scheduling" -#: kdmshutdown.cpp:286 +#: tdmshutdown.cpp:286 msgid "&Start:" msgstr "&Start:" -#: kdmshutdown.cpp:289 +#: tdmshutdown.cpp:289 msgid "T&imeout:" msgstr "T&imeout:" -#: kdmshutdown.cpp:291 +#: tdmshutdown.cpp:291 msgid "&Force after timeout" msgstr "&Force after timeout" -#: kdmshutdown.cpp:340 +#: tdmshutdown.cpp:340 msgid "Entered start date is invalid." msgstr "Entered start date is invalid." -#: kdmshutdown.cpp:349 +#: tdmshutdown.cpp:349 msgid "Entered timeout date is invalid." msgstr "Entered timeout date is invalid." -#: kdmshutdown.cpp:482 +#: tdmshutdown.cpp:482 msgid "&Turn Off Computer" msgstr "&Turn Off Computer" -#: kdmshutdown.cpp:489 +#: tdmshutdown.cpp:489 msgid "&Restart Computer" msgstr "&Restart Computer" -#: kdmshutdown.cpp:504 +#: tdmshutdown.cpp:504 msgid "" "_: current option in boot loader\n" "%1 (current)" msgstr "%1 (current)" -#: kdmshutdown.cpp:608 +#: tdmshutdown.cpp:608 msgid "Turn Off Computer" msgstr "Turn Off Computer" -#: kdmshutdown.cpp:611 +#: tdmshutdown.cpp:611 msgid "Switch to Console" msgstr "Switch to Console" -#: kdmshutdown.cpp:613 +#: tdmshutdown.cpp:613 msgid "Restart Computer" msgstr "Restart Computer" -#: kdmshutdown.cpp:615 +#: tdmshutdown.cpp:615 msgid "
    (Next boot: %1)" msgstr "
    (Next boot: %1)" -#: kdmshutdown.cpp:627 +#: tdmshutdown.cpp:627 msgid "Abort active sessions:" msgstr "Abort active sessions:" -#: kdmshutdown.cpp:628 +#: tdmshutdown.cpp:628 msgid "No permission to abort active sessions:" msgstr "No permission to abort active sessions:" -#: kdmshutdown.cpp:635 +#: tdmshutdown.cpp:635 msgid "Session" msgstr "Session" -#: kdmshutdown.cpp:636 +#: tdmshutdown.cpp:636 msgid "Location" msgstr "Location" -#: kdmshutdown.cpp:667 +#: tdmshutdown.cpp:667 msgid "Abort pending shutdown:" msgstr "Abort pending shutdown:" -#: kdmshutdown.cpp:668 +#: tdmshutdown.cpp:668 msgid "No permission to abort pending shutdown:" msgstr "No permission to abort pending shutdown:" -#: kdmshutdown.cpp:674 +#: tdmshutdown.cpp:674 msgid "now" msgstr "now" -#: kdmshutdown.cpp:680 +#: tdmshutdown.cpp:680 msgid "infinite" msgstr "infinite" -#: kdmshutdown.cpp:686 +#: tdmshutdown.cpp:686 msgid "" "Owner: %1\n" "Type: %2%5\n" @@ -434,23 +434,23 @@ msgstr "" "Start: %3\n" "Timeout: %4" -#: kdmshutdown.cpp:691 +#: tdmshutdown.cpp:691 msgid "console user" msgstr "console user" -#: kdmshutdown.cpp:693 +#: tdmshutdown.cpp:693 msgid "control socket" msgstr "control socket" -#: kdmshutdown.cpp:696 +#: tdmshutdown.cpp:696 msgid "turn off computer" msgstr "turn off computer" -#: kdmshutdown.cpp:697 +#: tdmshutdown.cpp:697 msgid "restart computer" msgstr "restart computer" -#: kdmshutdown.cpp:700 +#: tdmshutdown.cpp:700 #, c-format msgid "" "\n" @@ -459,7 +459,7 @@ msgstr "" "\n" "Next boot: %1" -#: kdmshutdown.cpp:703 +#: tdmshutdown.cpp:703 #, c-format msgid "" "\n" @@ -468,89 +468,89 @@ msgstr "" "\n" "After timeout: %1" -#: kdmshutdown.cpp:705 +#: tdmshutdown.cpp:705 msgid "abort all sessions" msgstr "abort all sessions" -#: kdmshutdown.cpp:707 +#: tdmshutdown.cpp:707 msgid "abort own sessions" msgstr "abort own sessions" -#: kdmshutdown.cpp:708 +#: tdmshutdown.cpp:708 msgid "cancel shutdown" msgstr "cancel shutdown" -#: themer/kdmlabel.cpp:170 +#: themer/tdmlabel.cpp:170 msgid "Language" msgstr "Language" -#: themer/kdmlabel.cpp:171 +#: themer/tdmlabel.cpp:171 msgid "Session Type" msgstr "Session Type" -#: themer/kdmlabel.cpp:172 +#: themer/tdmlabel.cpp:172 msgid "Menu" msgstr "Menu" -#: themer/kdmlabel.cpp:173 +#: themer/tdmlabel.cpp:173 msgid "Disconnect" msgstr "Disconnect" -#: themer/kdmlabel.cpp:175 +#: themer/tdmlabel.cpp:175 msgid "Power off" msgstr "Power off" -#: themer/kdmlabel.cpp:176 +#: themer/tdmlabel.cpp:176 msgid "Suspend" msgstr "Suspend" -#: themer/kdmlabel.cpp:177 +#: themer/tdmlabel.cpp:177 msgid "Reboot" msgstr "Reboot" -#: themer/kdmlabel.cpp:178 +#: themer/tdmlabel.cpp:178 msgid "XDMCP Chooser" msgstr "XDMCP Chooser" -#: themer/kdmlabel.cpp:180 +#: themer/tdmlabel.cpp:180 msgid "You have got caps lock on." msgstr "You have got caps lock on." -#: themer/kdmlabel.cpp:181 +#: themer/tdmlabel.cpp:181 #, c-format msgid "User %s will login in %d seconds" msgstr "User %s will login in %d seconds" -#: themer/kdmlabel.cpp:182 +#: themer/tdmlabel.cpp:182 #, c-format msgid "Welcome to %h" msgstr "Welcome to %h" -#: themer/kdmlabel.cpp:183 +#: themer/tdmlabel.cpp:183 msgid "Username:" msgstr "Username:" -#: themer/kdmlabel.cpp:184 +#: themer/tdmlabel.cpp:184 msgid "Password:" msgstr "Password:" -#: themer/kdmlabel.cpp:185 +#: themer/tdmlabel.cpp:185 msgid "Login" msgstr "Login" -#: themer/kdmlabel.cpp:225 +#: themer/tdmlabel.cpp:225 #, no-c-format msgid "" "_: date format\n" "%a %d %B" msgstr "%a %d %B" -#: themer/kdmthemer.cpp:67 +#: themer/tdmthemer.cpp:67 #, c-format msgid "Cannot open theme file %1" msgstr "Cannot open theme file %1" -#: themer/kdmthemer.cpp:71 +#: themer/tdmthemer.cpp:71 #, c-format msgid "Cannot parse theme file %1" msgstr "Cannot parse theme file %1" -- cgit v1.2.1