From f7e7a923aca8be643f9ae6f7252f9fb27b3d2c3b Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sat, 3 Dec 2011 11:05:10 -0600 Subject: Second part of prior commit --- tde-i18n-hi/messages/tdenetwork/kppp.po | 2230 +++++++++++++++++++++++++++++++ 1 file changed, 2230 insertions(+) create mode 100644 tde-i18n-hi/messages/tdenetwork/kppp.po (limited to 'tde-i18n-hi/messages/tdenetwork/kppp.po') diff --git a/tde-i18n-hi/messages/tdenetwork/kppp.po b/tde-i18n-hi/messages/tdenetwork/kppp.po new file mode 100644 index 00000000000..4e78ae3808d --- /dev/null +++ b/tde-i18n-hi/messages/tdenetwork/kppp.po @@ -0,0 +1,2230 @@ +# translation of kppp.po to Hindi +# Ravishankar Shrivastava , 2004. +# Ravishankar Shrivastava , 2004. +msgid "" +msgstr "" +"Project-Id-Version: kppp\n" +"POT-Creation-Date: 2006-06-13 04:00+0200\n" +"PO-Revision-Date: 2004-08-22 15:40+0530\n" +"Last-Translator: Ravishankar Shrivastava \n" +"Language-Team: Hindi \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.3.1\n" + +#: _translatorinfo.cpp:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "रविशंकर श्रीवास्तव" + +#: _translatorinfo.cpp:3 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/" + +#: accounts.cpp:74 modems.cpp:73 +msgid "&Edit..." +msgstr "संपादन... (&E)" + +#: accounts.cpp:76 modems.cpp:75 +msgid "Allows you to modify the selected account" +msgstr "चुने गए खाते को परिवर्धित करने देता है" + +#: accounts.cpp:84 modems.cpp:83 +msgid "&New..." +msgstr "नया... (&N)" + +#: accounts.cpp:87 modems.cpp:86 +msgid "" +"Create a new dialup connection\n" +"to the Internet" +msgstr "" +"इंटरनेट के लिए नया डायलअप कनेक्शन\n" +"बनाएँ" + +#: accounts.cpp:90 modems.cpp:89 +msgid "Co&py" +msgstr "नक़ल (&p)" + +#: accounts.cpp:94 modems.cpp:93 +msgid "" +"Makes a copy of the selected account. All\n" +"settings of the selected account are copied\n" +"to a new account that you can modify to fit your\n" +"needs" +msgstr "" + +#: accounts.cpp:99 modems.cpp:98 +msgid "De&lete" +msgstr "मिटाएँ (&l)" + +#: accounts.cpp:103 modems.cpp:102 +msgid "" +"

Deletes the selected account\n" +"\n" +"Use with care!" +msgstr "" +"

चुने गए खाते को मिटाता है\n" +"\n" +"Use with care!" + +#: accounts.cpp:113 +msgid "Phone costs:" +msgstr "दूरभाष खर्चः" + +#: accounts.cpp:123 +msgid "" +"

This shows the accumulated phone costs\n" +"for the selected account.\n" +"\n" +"Important: If you have more than one \n" +"account - beware, this is NOT the sum \n" +"of the phone costs of all your accounts!" +msgstr "" + +#: accounts.cpp:132 conwindow.cpp:52 +msgid "Volume:" +msgstr "आवाज़ निर्धारक:" + +#: accounts.cpp:141 +msgid "" +"

This shows the number of bytes transferred\n" +"for the selected account (not for all of your\n" +"accounts. You can select what to display in\n" +"the accounting dialog.\n" +"\n" +"More on volume accounting" +msgstr "" + +#: accounts.cpp:156 +msgid "&Reset..." +msgstr "रीसेट... (&R)" + +#: accounts.cpp:162 +msgid "&View Logs" +msgstr "लॉग देखें (&V)" + +#: accounts.cpp:262 accounts.cpp:307 +msgid "Maximum number of accounts reached." +msgstr "खातों की अधिकतम संख्या आ चुकी" + +#: accounts.cpp:268 +msgid "" +"Do you want to use the wizard to create the new account or the standard, " +"dialog-based setup?\n" +"The wizard is easier and sufficient in most cases. If you need very special " +"settings, you might want to try the standard, dialog-based setup." +msgstr "" + +#: accounts.cpp:273 providerdb.cpp:55 +msgid "Create New Account" +msgstr "नया ख़ाता बनाएँ" + +#: accounts.cpp:274 +msgid "&Wizard" +msgstr "विजार्ड (&W)" + +#: accounts.cpp:274 +msgid "&Manual Setup" +msgstr "मेनुअल सेटअप (&M)" + +#: accounts.cpp:312 +msgid "No account selected." +msgstr "कोई ख़ाता चुने गए नहीं." + +#: accounts.cpp:326 +msgid "" +"Are you sure you want to delete\n" +"the account \"%1\"?" +msgstr "" +"क्या आप वाक़ई\n" +"खाता\"%1\" को मिटाना चाहते हैं?" + +#: accounts.cpp:329 modems.cpp:195 +msgid "Confirm" +msgstr "पक्का करें" + +#: accounts.cpp:351 +msgid "New Account" +msgstr "नया खाता" + +#: accounts.cpp:354 +msgid "Edit Account: " +msgstr "खाता संपादनः" + +#: accounts.cpp:360 +msgid "Dial" +msgstr "डॉयल" + +#: accounts.cpp:360 +msgid "Dial Setup" +msgstr "डायल सेटअप" + +#: accounts.cpp:361 +msgid "IP" +msgstr "आईपी" + +#: accounts.cpp:361 +msgid "IP Setup" +msgstr "आईपी सेटअप" + +#: accounts.cpp:362 +msgid "Gateway" +msgstr "गेटवे" + +#: accounts.cpp:362 +msgid "Gateway Setup" +msgstr "गेटवे सेटअप" + +#: accounts.cpp:363 +msgid "DNS" +msgstr "डीएनएस" + +#: accounts.cpp:363 +msgid "DNS Servers" +msgstr "डीएनएस सर्वर्स" + +#: accounts.cpp:364 +msgid "Login Script" +msgstr "लॉगइन स्क्रिप्ट" + +#: accounts.cpp:364 +msgid "Edit Login Script" +msgstr "लॉगइन स्क्रिप्ट संपादन" + +#: accounts.cpp:365 +msgid "Execute" +msgstr "चलाएँ" + +#: accounts.cpp:365 +msgid "Execute Programs" +msgstr "प्रोग्राम चलाएँ" + +#: accounts.cpp:366 +msgid "Accounting" +msgstr "हिसाब किताब" + +#: accounts.cpp:386 +msgid "" +"You must enter a unique\n" +"account name" +msgstr "" +"आपको एक विशिष्ट\n" +"खाता नाम प्रविष्ट करना होगा" + +#: accounts.cpp:391 +msgid "Login script has unbalanced loop Start/End" +msgstr "लॉगइन स्क्रिप्ट में असंतुलित लूप प्रारंभ/अंत है" + +#: accounts.cpp:405 conwindow.cpp:98 modems.cpp:259 +msgid "Byte" +msgstr "बाइट" + +#: accounts.cpp:405 conwindow.cpp:98 modems.cpp:259 +msgid "KB" +msgstr "केबी" + +#: accounts.cpp:406 conwindow.cpp:99 modems.cpp:260 +msgid "MB" +msgstr "एमबी" + +#: accounts.cpp:406 conwindow.cpp:99 modems.cpp:260 +msgid "GB" +msgstr "जीबी" + +#: accounts.cpp:431 +msgid "Reset Accounting" +msgstr "हिसाब किताब रीसेट करें" + +#: accounts.cpp:434 +msgid "What to Reset" +msgstr "क्या रीसेट करें" + +#: accounts.cpp:437 +msgid "Reset the accumulated p&hone costs" +msgstr "संचित दूरभाष खर्च रीसेट करें (&h)" + +#: accounts.cpp:440 +msgid "" +"Check this to set the phone costs\n" +"to zero. Typically you will want to\n" +"do this once a month." +msgstr "" + +#: accounts.cpp:444 +msgid "Reset &volume accounting" +msgstr "परिमाण ख़ाता रीसेट करें (&v)" + +#: accounts.cpp:447 +msgid "" +"Check this to set the volume accounting\n" +"to zero. Typically you will want to do this\n" +"once a month." +msgstr "" + +#: acctselect.cpp:61 +msgid "&Enable accounting" +msgstr "हिसाब किताब सक्षम करें (&E)" + +#: acctselect.cpp:74 +msgid "Check for rule updates" +msgstr "नियम अद्यतन के लिए चेक करें" + +#: acctselect.cpp:84 +msgid "Selected:" +msgstr "चुने गएः" + +#: acctselect.cpp:97 +msgid "Volume accounting:" +msgstr "परिमाण खाताः" + +#: acctselect.cpp:99 +msgid "No Accounting" +msgstr "कोई खाता-बही नहीं" + +#: acctselect.cpp:100 +msgid "Bytes In" +msgstr "बाइट्स आए" + +#: acctselect.cpp:101 +msgid "Bytes Out" +msgstr "बाइट्स गए" + +#: acctselect.cpp:102 +msgid "Bytes In & Out" +msgstr "बाइट्स आए व गए" + +#: acctselect.cpp:254 +msgid "Available Rules" +msgstr "उपलब्ध नियम" + +#: acctselect.cpp:282 +msgid "(none)" +msgstr "(कुछ नहीं)" + +#: connect.cpp:104 +msgid "Connecting to: " +msgstr "से कनेक्ट हो रहेः" + +#: connect.cpp:113 connect.cpp:247 miniterm.cpp:135 modeminfo.cpp:58 +#: modeminfo.cpp:135 +msgid "Unable to create modem lock file." +msgstr "मॉडम लॉक फ़ाइल बनाने में अक्षम." + +#: connect.cpp:118 connect.cpp:186 modeminfo.cpp:63 +msgid "Looking for modem..." +msgstr "मॉडम के लिए देख रहे..." + +#: connect.cpp:126 +msgid "&Log" +msgstr "लॉग (&L)" + +#: connect.cpp:213 kpppwidget.cpp:778 +#, c-format +msgid "Connecting to: %1" +msgstr " %1: से जुड़ रहे" + +#: connect.cpp:223 connect.cpp:224 +msgid "Running pre-startup command..." +msgstr "प्री-स्टार्टअप कमांड चला रहे..." + +#: connect.cpp:241 miniterm.cpp:130 modeminfo.cpp:129 +msgid "Modem device is locked." +msgstr "मॉडेम उपकरण तालाबन्द है." + +#: connect.cpp:294 connect.cpp:295 +msgid "Initializing modem..." +msgstr "मॉडम प्रारंभ किया जा रहा है..." + +#: connect.cpp:332 +msgid "Setting " +msgstr "विन्यास" + +#: connect.cpp:355 connect.cpp:356 +msgid "Setting speaker volume..." +msgstr "स्पीकर आवाज़ नियत किया जा रहा है..." + +#: connect.cpp:371 +msgid "Turning off dial tone waiting..." +msgstr "डायल डोन इंतजार बंद किया जा रहा है..." + +#: connect.cpp:390 +msgid "Waiting for callback..." +msgstr "" + +#: connect.cpp:401 +#, c-format +msgid "Dialing %1" +msgstr "डायल किया जा रहा है %1" + +#: connect.cpp:432 +msgid "Line busy. Hanging up..." +msgstr "लाइन व्यस्त है. हैंगिंग अप..." + +#: connect.cpp:437 +msgid "Line busy. Waiting: %1 seconds" +msgstr "लाइन व्यस्त है. इंतजारः %1 सेकण्ड" + +#: connect.cpp:457 +msgid "No Dial Tone" +msgstr "डायल टोन नहीं" + +#: connect.cpp:470 +#, fuzzy +msgid "No carrier. Waiting: %1 seconds" +msgstr "लाइन व्यस्त है. इंतजारः %1 सेकण्ड" + +#: connect.cpp:487 +msgid "No Carrier" +msgstr "कोई कैरियर नहीं" + +#: connect.cpp:498 +msgid "Digital Line Protection Detected." +msgstr "डिजिटल लाइन सुरक्षा पता लगा." + +#: connect.cpp:502 +msgid "" +"A Digital Line Protection (DLP) error response has been detected.\n" +"Please disconnect the phone line.\n" +"\n" +"Do NOT connect this modem to a digital phone line or the modem could get " +"permanently damaged" +msgstr "" + +#: connect.cpp:556 +#, c-format +msgid "Scanning %1" +msgstr "स्कैन किया जा रहा है %1" + +#: connect.cpp:566 +#, c-format +msgid "Saving %1" +msgstr "सहेज रहे %1" + +#: connect.cpp:584 +#, c-format +msgid "Sending %1" +msgstr "भेज रहे %1" + +#: connect.cpp:609 +#, c-format +msgid "Expecting %1" +msgstr "प्रत्याशित %1" + +#: connect.cpp:623 +msgid "Pause %1 seconds" +msgstr "ठहरें %1 सेकण्ड" + +#: connect.cpp:640 +msgid "Timeout %1 seconds" +msgstr "टाइमआउट %1 सेकण्ड" + +#: connect.cpp:652 connect.cpp:653 +msgid "Hangup" +msgstr "हैंगअप" + +#: connect.cpp:666 connect.cpp:667 +msgid "Answer" +msgstr "उत्तर" + +#: connect.cpp:675 +#, c-format +msgid "ID %1" +msgstr "आईडी %1" + +#: connect.cpp:711 +#, c-format +msgid "Password %1" +msgstr "पासवर्ड %1" + +#: connect.cpp:748 +#, c-format +msgid "Prompting %1" +msgstr "बता रहे %1" + +#: connect.cpp:785 +#, c-format +msgid "PW Prompt %1" +msgstr "पीडब्ल्यू संकेत %1" + +#: connect.cpp:810 +#, c-format +msgid "Loop Start %1" +msgstr "लूप चालू करें %1" + +#: connect.cpp:818 +msgid "ERROR: Nested too deep, ignored." +msgstr "त्रुटिः नेस्टेड बहुत गहरा है, नज़र अंदाज़ किया." + +#: connect.cpp:821 +#, fuzzy +msgid "Loops nested too deeply." +msgstr "लूप्स नेस्टेड बहुत गहरा है!" + +#: connect.cpp:835 +#, c-format +msgid "Loop End %1" +msgstr "लूप ख़त्म %1" + +#: connect.cpp:837 +#, fuzzy, c-format +msgid "LoopEnd without matching Start. Line: %1" +msgstr "बिना जोड़ प्रारंभ के लूप ख़त्म! पंक्ति: %1" + +#: connect.cpp:922 +msgid "Starting pppd..." +msgstr "पीपीडी चालू किया जा रहा है..." + +#: connect.cpp:1006 +#, c-format +msgid "Scan Var: %1" +msgstr "स्कैन वीएआर: %1" + +#: connect.cpp:1016 +#, c-format +msgid "Found: %1" +msgstr "मिला: %1" + +#: connect.cpp:1027 +#, c-format +msgid "Looping: %1" +msgstr "लूपिंग: %1" + +#: connect.cpp:1061 modeminfo.cpp:226 +msgid "One moment please..." +msgstr "कृपया एक क्षण..." + +#: connect.cpp:1105 +#, fuzzy +msgid "Script timed out." +msgstr "स्क्रिप्ट टाइम्ड आउट!" + +#: connect.cpp:1120 +#, c-format +msgid "Scanning: %1" +msgstr "स्कैन किया जा रहा है: %1" + +#: connect.cpp:1129 +#, c-format +msgid "Expecting: %1" +msgstr "प्रत्याशित %1" + +#: connect.cpp:1164 +msgid "Logging on to network..." +msgstr "नेटवर्क पर लागिंग..." + +#: connect.cpp:1198 +msgid "Running startup command..." +msgstr "शुरुआती कमांड चलाए जा रहे हैं..." + +#: connect.cpp:1203 connect.cpp:1210 +msgid "Done" +msgstr "सम्पन्न" + +#: connect.cpp:1279 edit.cpp:157 general.cpp:262 modem.cpp:187 +msgid "None" +msgstr "कोई नहीं" + +#: connect.cpp:1281 general.cpp:260 modem.cpp:188 pppdata.cpp:546 +msgid "Hardware [CRTSCTS]" +msgstr "हार्डवेयर [CRTSCTS]" + +#: connect.cpp:1339 +msgid "pppd command + command-line arguments exceed 2024 characters in length." +msgstr "" + +#: conwindow.cpp:46 +msgid "Connected at:" +msgstr "इस पर कनेक्टेडः" + +#: conwindow.cpp:49 +msgid "Time connected:" +msgstr "समय से कनेक्टेडः" + +#: conwindow.cpp:56 +msgid "Session bill:" +msgstr "सत्र खर्चः" + +#: conwindow.cpp:58 +msgid "Total bill:" +msgstr "कुल खर्चः" + +#: conwindow.cpp:64 +msgid "&Disconnect" +msgstr "डिस्कनेक्ट (&D)" + +#: conwindow.cpp:68 +msgid "De&tails" +msgstr "विवरण (&t)" + +#: conwindow.cpp:264 +msgid "" +"Connection: %1\n" +"Connected at: %2\n" +"Time connected: %3" +msgstr "" +"कनेक्शन: %1\n" +"इस पर कनेक्टेड: %2\n" +"इतने समय से कनेक्टेड: %3" + +#: conwindow.cpp:271 +msgid "" +"\n" +"Session Bill: %1\n" +"Total Bill: %2" +msgstr "" +"\n" +"सत्र बिल: %1\n" +"कुल बिल: %2" + +#: debug.cpp:51 +msgid "Login Script Debug Window" +msgstr "लॉगइन स्क्रिप्ट डिबग विंडो" + +#: docking.cpp:54 +msgid "Details" +msgstr "विवरण" + +#: docking.cpp:56 +msgid "Disconnect" +msgstr "डिस्कनेक्ट" + +#: docking.cpp:125 +msgid "Minimize" +msgstr "न्यूनतम " + +#: edit.cpp:54 +msgid "Connection &name:" +msgstr "कनेक्शन नामः (&n)" + +#: edit.cpp:62 +msgid "Type in a unique name for this connection" +msgstr "इस कनेक्शन के लिए विशिष्ट नाम भरें" + +#: edit.cpp:68 +msgid "P&hone number:" +msgstr "दूरभाष क्रमांकः (&h)" + +#: edit.cpp:80 +msgid "&Add..." +msgstr "जोड़ें...(&A)" + +#: edit.cpp:104 +msgid "" +"

Specifies the phone numbers to dial. You\n" +"can supply multiple numbers here, simply\n" +"click on \"Add\". You can arrange the\n" +"order the numbers are tried by using the\n" +"arrow buttons.\n" +"\n" +"When a number is busy or fails, kppp will \n" +"try the next number and so on" +msgstr "" + +#: edit.cpp:115 +msgid "A&uthentication:" +msgstr "प्रमाणीकरणः (&u)" + +#: edit.cpp:120 +msgid "Script-based" +msgstr "स्क्रिप्ट-आधारित" + +#: edit.cpp:121 +msgid "PAP" +msgstr "पीएपी" + +#: edit.cpp:122 +msgid "Terminal-based" +msgstr "टर्मिनल-आधारित" + +#: edit.cpp:123 +msgid "CHAP" +msgstr "सीएचएपी" + +#: edit.cpp:124 +msgid "PAP/CHAP" +msgstr "पीएपी/सीएचएपी" + +#: edit.cpp:126 +msgid "" +"

Specifies the method used to identify yourself to\n" +"the PPP server. Most universities still use\n" +"Terminal- or Script-based authentication,\n" +"while most ISP use PAP and/or CHAP. If\n" +"unsure, contact your ISP.\n" +"\n" +"If you can choose between PAP and CHAP,\n" +"choose CHAP, because it's much safer. If you don't know\n" +"whether PAP or CHAP is right, choose PAP/CHAP." +msgstr "" + +#: edit.cpp:139 +msgid "Store &password" +msgstr "पासवर्ड भंडारित करें (&p)" + +#: edit.cpp:143 +msgid "" +"

When this is turned on, your ISP password\n" +"will be saved in kppp's config file, so\n" +"you do not need to type it in every time.\n" +"\n" +"Warning: your password will be stored as\n" +"plain text in the config file, which is\n" +"readable only to you. Make sure nobody\n" +"gains access to this file!" +msgstr "" + +#: edit.cpp:152 +msgid "&Callback type:" +msgstr "" + +#: edit.cpp:158 +msgid "Administrator-defined" +msgstr "" + +#: edit.cpp:159 +msgid "User-defined" +msgstr "" + +#: edit.cpp:163 +msgid "Callback type" +msgstr "" + +#: edit.cpp:168 +msgid "Call&back number:" +msgstr "" + +#: edit.cpp:175 +#, fuzzy +msgid "Callback phone number" +msgstr "दूरभाष क्रमांक प्रविष्ट करें:" + +#: edit.cpp:180 +msgid "Customize &pppd Arguments..." +msgstr "पीपीपीडी आर्गुमेंट्स मनपसंद बनाएँ... (&p)" + +#: edit.cpp:321 +msgid "" +"Here you can select commands to run at certain stages of the\n" +"connection. The commands are run with your real user id, so\n" +"you cannot run any commands here requiring root permissions\n" +"(unless, of course, you are root).\n" +"\n" +"Be sure to supply the whole path to the program otherwise\n" +"kppp might be unable to find it." +msgstr "" + +#: edit.cpp:336 +msgid "&Before connect:" +msgstr "कनेक्शन से पहलेः (&B)" + +#: edit.cpp:343 +msgid "" +"Allows you to run a program before a connection\n" +"is established. It is called immediately before\n" +"dialing has begun.\n" +"\n" +"This might be useful, e.g. to stop HylaFAX blocking the\n" +"modem." +msgstr "" + +#: edit.cpp:352 +msgid "&Upon connect:" +msgstr "कनेक्शन परः (&U)" + +#: edit.cpp:359 +msgid "" +"Allows you to run a program after a connection\n" +"is established. When your program is called, all\n" +"preparations for an Internet connection are finished.\n" +"\n" +"Very useful for fetching mail and news" +msgstr "" + +#: edit.cpp:368 +msgid "Before &disconnect:" +msgstr "डिस्कनेक्ट से पहलेः (&d)" + +#: edit.cpp:376 +msgid "" +"Allows you to run a program before a connection\n" +"is closed. The connection will stay open until\n" +"the program exits." +msgstr "" + +#: edit.cpp:383 +msgid "U&pon disconnect:" +msgstr "डिस्कनेक्ट होने परः (&p)" + +#: edit.cpp:392 +msgid "" +"Allows you to run a program after a connection\n" +"has been closed." +msgstr "" + +#: edit.cpp:436 edit.cpp:791 +msgid "C&onfiguration" +msgstr "कॉन्फ़िगरेशन (&o)" + +#: edit.cpp:445 +msgid "Dynamic IP address" +msgstr "डायनामिक आईपी पता" + +#: edit.cpp:447 +msgid "" +"Select this option when your computer gets an\n" +"internet address (IP) every time a\n" +"connection is made.\n" +"\n" +"Almost every Internet Service Provider uses\n" +"this method, so this should be turned on." +msgstr "" + +#: edit.cpp:455 +msgid "Static IP address" +msgstr "स्टेटिक आईपी पता" + +#: edit.cpp:459 +msgid "" +"Select this option when your computer has a\n" +"fixed internet address (IP). Most computers\n" +"don't have this, so you should probably select\n" +"dynamic IP addressing unless you know what you\n" +"are doing." +msgstr "" + +#: edit.cpp:469 +msgid "&IP address:" +msgstr "आईपी पता: (&I)" + +#: edit.cpp:470 +msgid "" +"If your computer has a permanent internet\n" +"address, you must supply your IP address here." +msgstr "" + +#: edit.cpp:481 +msgid "&Subnet mask:" +msgstr "सबनेट मास्कः (&S)" + +#: edit.cpp:482 +msgid "" +"

If your computer has a static Internet address,\n" +"you must supply a network mask here. In almost\n" +"all cases this netmask will be 255.255.255.0,\n" +"but your mileage may vary.\n" +"\n" +"If unsure, contact your Internet Service Provider" +msgstr "" + +#: edit.cpp:497 +msgid "&Auto-configure hostname from this IP" +msgstr "इस आईपी से होस्ट नाम स्वचलित कॉन्फ़िगर करें (&A)" + +#: edit.cpp:503 +msgid "" +"

Whenever you connect, this reconfigures\n" +"your hostname to match the IP address you\n" +"got from the PPP server. This may be useful\n" +"if you need to use a protocol which depends\n" +"on this information, but it can also cause several\n" +"problems.\n" +"\n" +"Do not enable this unless you really need it." +msgstr "" + +#: edit.cpp:544 +msgid "" +"Selecting this option might cause some weird problems with the X-server and " +"applications while kppp is connected. Don't use it until you know what you are " +"doing!\n" +"For more information take a look at the handbook (or help) in the section " +"\"Frequently asked questions\"." +msgstr "" + +#: edit.cpp:592 +msgid "Domain &name:" +msgstr "डोमेन नामः (&n)" + +#: edit.cpp:599 +msgid "" +"If you enter a domain name here, this domain\n" +"name is used for your computer while you are\n" +"connected. When the connection is closed, the\n" +"original domain name of your computer is\n" +"restored.\n" +"\n" +"If you leave this field blank, no changes are\n" +"made to the domain name." +msgstr "" + +#: edit.cpp:611 +msgid "C&onfiguration:" +msgstr "कॉन्फ़िगरेशनः (&o)" + +#: edit.cpp:619 +msgid "Automatic" +msgstr "स्वचलित" + +#: edit.cpp:626 +msgid "Manual" +msgstr "हस्तचालित" + +#: edit.cpp:630 +msgid "DNS &IP address:" +msgstr "डीएनएस आईपी पताः (&I)" + +#: edit.cpp:643 +msgid "" +"

Allows you to specify a new DNS server to be\n" +"used while you are connected. When the\n" +"connection is closed, this DNS entry will be\n" +"removed again.\n" +"\n" +"To add a DNS server, type in the IP address of\n" +"the DNS server here and click on Add" +msgstr "" + +#: edit.cpp:656 edit.cpp:887 pppdargs.cpp:76 +msgid "&Add" +msgstr "जोड़ें (&A)" + +#: edit.cpp:664 +msgid "" +"Click this button to add the DNS server\n" +"specified in the field above. The entry\n" +"will then be added to the list below" +msgstr "" + +#: edit.cpp:675 +msgid "" +"Click this button to remove the selected DNS\n" +"server entry from the list below" +msgstr "" + +#: edit.cpp:678 +msgid "DNS address &list:" +msgstr "डीएनएस पता सूचीः (&l)" + +#: edit.cpp:688 +msgid "" +"

This shows all defined DNS servers to use\n" +"while you are connected. Use the Add and\n" +"Remove buttons to modify the list" +msgstr "" + +#: edit.cpp:696 +msgid "&Disable existing DNS servers during connection" +msgstr "कनेक्शन के दौरान मौज़ूदा डीएनएस सर्वर्स अक्षम करें (&D)" + +#: edit.cpp:701 +msgid "" +"

When this option is selected, all DNS\n" +"servers specified in /etc/resolv.conf are\n" +"temporary disabled while the dialup connection\n" +"is established. After the connection is\n" +"closed, the servers will be re-enabled\n" +"\n" +"Typically, there is no reason to use this\n" +"option, but it may become useful under \n" +"some circumstances." +msgstr "" + +#: edit.cpp:799 +msgid "Default gateway" +msgstr "डिफ़ॉल्ट गेटवे" + +#: edit.cpp:802 +msgid "" +"This makes the PPP peer computer (the computer\n" +"you are connected to with your modem) to act as\n" +"a gateway. Your computer will send all packets not\n" +"going to a computer inside your local net to this\n" +"computer, which will route these packets.\n" +"\n" +"This is the default for most ISPs, so you should\n" +"probably leave this option on." +msgstr "" + +#: edit.cpp:813 +msgid "Static gateway" +msgstr "स्थिर गेटवे" + +#: edit.cpp:816 +msgid "" +"

Allows you to specify which computer you want\n" +"to use as gateway (see Default Gateway above)" +msgstr "" + +#: edit.cpp:820 +msgid "Gateway &IP address:" +msgstr "गेटवे आईपी पताः (&I)" + +#: edit.cpp:824 +msgid "&Assign the default route to this gateway" +msgstr "इस गेटवे पर डिफ़ॉल्ट रूट आबंटित करें (&A)" + +#: edit.cpp:827 +msgid "" +"If this option is enabled, all packets not\n" +"going to the local net are routed through\n" +"the PPP connection.\n" +"\n" +"Normally, you should turn this on" +msgstr "" + +#: edit.cpp:1204 +msgid "Add Phone Number" +msgstr "दूरभाष क्रमांक जोड़ें" + +#: edit.cpp:1212 +msgid "Enter a phone number:" +msgstr "दूरभाष क्रमांक प्रविष्ट करें:" + +#: general.cpp:56 +msgid "pppd version:" +msgstr "पीपीपीडी संस्करण:" + +#: general.cpp:66 +msgid "pppd &timeout:" +msgstr "पीपीपीडी टाइम-आउटः (&t)" + +#: general.cpp:68 general.cpp:384 general.cpp:470 +msgid " sec" +msgstr "सेक." + +#: general.cpp:72 +msgid "" +"kppp will wait this number of seconds\n" +"to see if a PPP connection is established.\n" +"If no connection is made in this time frame,\n" +"kppp will give up and kill pppd." +msgstr "" + +#: general.cpp:82 +msgid "Doc&k into panel on connect" +msgstr "जुड़ने पर फलक पर डाक करें (&k)" + +#: general.cpp:84 +msgid "" +"

After a connection is established, the\n" +"window is minimized and a small icon\n" +"in the KDE panel represents this window.\n" +"\n" +"Clicking on this icon will restore the\n" +"window to its original location and\n" +"size." +msgstr "" + +#: general.cpp:97 +msgid "A&utomatic redial on disconnect" +msgstr "डिस्कनेक्ट होने पर स्वचलित फिर से डायल करें (&u)" + +#: general.cpp:103 +msgid "" +"

When a connection is established and\n" +"it somehow gets disconnected, kppp\n" +"will try to reconnect to the same account.\n" +"\n" +"See here for more on this topic." +msgstr "" + +#: general.cpp:109 +#, fuzzy +msgid "Automatic redial on NO &CARRIER" +msgstr "डिस्कनेक्ट होने पर स्वचलित फिर से डायल करें (&u)" + +#: general.cpp:115 +msgid "" +"

When dialing if modem returns NO CARRIER\n" +"the program will make a new attempt to redial\n" +"instead of waiting for user to click \n" +"button." +msgstr "" + +#: general.cpp:120 +msgid "&Show clock on caption" +msgstr "शीर्षक में घड़ी दिखाएँ (&S)" + +#: general.cpp:126 +msgid "" +"When this option is checked, the window\n" +"title shows the time since a connection\n" +"was established. Very useful, so you \n" +"should turn this on" +msgstr "" + +#: general.cpp:131 +msgid "Disco&nnect on X server shutdown" +msgstr "एक्स सर्वर के शटडाउन होने पर डिस्कनेक्ट हों (&n)" + +#: general.cpp:137 +msgid "" +"

Checking this option will close any\n" +"open connection when the X-server is\n" +"shut down. You should enable this option\n" +"unless you know what you are doing.\n" +"\n" +"See here for more on this." +msgstr "" + +#: general.cpp:144 +msgid "&Quit on disconnect" +msgstr "डिस्कनेक्ट पर बाहर हों (&Q)" + +#: general.cpp:150 +msgid "" +"When this option is turned on, kppp\n" +"will be closed when you disconnect" +msgstr "" +"यदि यह विकल्प सक्षम किया जाता है, के-पीपीपी\n" +"बन्द हो जाएगा जब आप डिस्कनेक्ट होंगे" + +#: general.cpp:153 +msgid "Minimi&ze window on connect" +msgstr "कनेक्ट होने पर विंडो न्यूनतम करें (&z)" + +#: general.cpp:159 +msgid "" +"Iconifies kppp's window when a\n" +"connection is established" +msgstr "" +"के-पीपीपी' विंडो को चिह्व रूप में बना देता है जब एक\n" +"कनेक्शन स्थापित होता है" + +#: general.cpp:211 +#, fuzzy +msgid "Modem &name:" +msgstr "मॉडम आवाजः (&v)" + +#: general.cpp:219 +#, fuzzy +msgid "Type in a unique name for this modem" +msgstr "इस कनेक्शन के लिए विशिष्ट नाम भरें" + +#: general.cpp:224 +msgid "Modem de&vice:" +msgstr "मॉडम उपकरणः (&v)" + +#: general.cpp:243 +msgid "" +"This specifies the serial port your modem is attached \n" +"to. On Linux/x86, typically this is either /dev/ttyS0 \n" +"(COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).\n" +"\n" +"If you have an internal ISDN card with AT command\n" +"emulation (most cards under Linux support this), you\n" +"should select one of the /dev/ttyIx devices." +msgstr "" + +#: general.cpp:255 +msgid "&Flow control:" +msgstr "फ्लो कंट्रोलः (&F)" + +#: general.cpp:261 +msgid "Software [XON/XOFF]" +msgstr "सॉफ्टवेयर [XON/XOFF]" + +#: general.cpp:272 +msgid "" +"

Specifies how the serial port and modem\n" +"communicate. You should not change this unless\n" +"you know what you are doing.\n" +"\n" +"Default: CRTSCTS" +msgstr "" + +#: general.cpp:281 +msgid "&Line termination:" +msgstr "पंक्ति की समाप्ति (&L)" + +#: general.cpp:291 +msgid "" +"

Specifies how AT commands are sent to your\n" +"modem. Most modems will work fine with the\n" +"default CR/LF. If your modem does not react\n" +"to the init string, you should try different\n" +"settings here\n" +"\n" +"Default: CR/LF" +msgstr "" + +#: general.cpp:302 +msgid "Co&nnection speed:" +msgstr "कनेक्शन गतिः (&n)" + +#: general.cpp:343 +msgid "" +"Specifies the speed your modem and the serial\n" +"port talk to each other. You should begin with\n" +"at least 115200 bits/sec (or more if you know\n" +"that your serial port supports higher speeds).\n" +"If you have connection problems, try to reduce\n" +"this value." +msgstr "" + +#: general.cpp:361 +msgid "&Use lock file" +msgstr "लाक फ़ाइल इस्तेमाल करें (&U)" + +#: general.cpp:369 +msgid "" +"

To prevent other programs from accessing the\n" +"modem while a connection is established, a\n" +"file can be created to indicate that the modem\n" +"is in use. On Linux an example file would be\n" +"/var/lock/LCK..ttyS1\n" +"Here you can select whether this locking will\n" +"be done.\n" +"\n" +"Default: On" +msgstr "" + +#: general.cpp:382 +msgid "Modem &timeout:" +msgstr "मॉडम टाइम-आउटः (&t)" + +#: general.cpp:390 +msgid "" +"This specifies how long kppp waits for a\n" +"CONNECT response from your modem. The\n" +"recommended value is 30 seconds." +msgstr "" + +#: general.cpp:454 +msgid "&Wait for dial tone before dialing" +msgstr "डायल करने से पहले डायल टोन का इंतजार करें (&W)" + +#: general.cpp:459 +msgid "" +"

Normally the modem waits for a dial tone\n" +"from your phone line, indicating that it can\n" +"start to dial a number. If your modem does not\n" +"recognize this sound, or your local phone system\n" +"does not emit such a tone, uncheck this option\n" +"\n" +"Default:: On" +msgstr "" + +#: general.cpp:468 +msgid "B&usy wait:" +msgstr "व्यस्त इंतजारः (&u)" + +#: general.cpp:475 +msgid "" +"Specifies the number of seconds to wait before\n" +"redial if all dialed numbers are busy. This is\n" +"necessary because some modems get stuck if the\n" +"same number is busy too often.\n" +"\n" +"The default is 0 seconds, you should not change\n" +"this unless you need to." +msgstr "" + +#: general.cpp:488 +msgid "Modem &volume:" +msgstr "मॉडम आवाजः (&v)" + +#: general.cpp:499 +msgid "" +"Most modems have a speaker which makes\n" +"a lot of noise when dialing. Here you can\n" +"either turn this completely off or select a\n" +"lower volume.\n" +"\n" +"If this does not work for your modem,\n" +"you must modify the modem volume command." +msgstr "" + +#: general.cpp:513 +msgid "Modem asserts CD line" +msgstr "मॉडम एसर्ट्स सीडी लाइन" + +#: general.cpp:521 +msgid "" +"This controls how kppp detects that the modem\n" +"is not responding. Unless you are having\n" +"problems with this, do not modify this setting.\n" +"\n" +"Default: Off" +msgstr "" + +#: general.cpp:528 +msgid "Mod&em Commands..." +msgstr "मॉडम कमांड्स... (&e)" + +#: general.cpp:530 +msgid "" +"Allows you to change the AT command for\n" +"your modem." +msgstr "" +"आपके मॉडम के लिए इसके एटी कमांड्स को बदलने\n" +"की अनुमति देता है." + +#: general.cpp:533 +msgid "&Query Modem..." +msgstr "मॉडम क्वैरी करें... (&Q)" + +#: general.cpp:535 +msgid "" +"Most modems support the ATI command set to\n" +"find out vendor and revision of your modem.\n" +"\n" +"Press this button to query your modem for\n" +"this information. It can be useful to help\n" +"you set up the modem" +msgstr "" + +#: general.cpp:542 +msgid "&Terminal..." +msgstr "टर्मिनल... (&T)" + +#: general.cpp:544 +msgid "" +"Opens the built-in terminal program. You\n" +"can use this if you want to play around\n" +"with your modem's AT command set" +msgstr "" + +#: general.cpp:619 +msgid "&Enable throughput graph" +msgstr "थ्रोपुट ग्राफ सक्षम करें (&E)" + +#: general.cpp:623 +msgid "Graph Colors" +msgstr "ग्राफ रंग" + +#: general.cpp:628 +msgid "Bac&kground:" +msgstr "पृष्ठभूमि: (&k)" + +#: general.cpp:633 +msgid "&Text:" +msgstr "पाठः (&T)" + +#: general.cpp:638 +msgid "I&nput bytes:" +msgstr "इनपुट बाइट्स: (&n)" + +#: general.cpp:643 +msgid "O&utput bytes:" +msgstr "आउटपुट बाइट्स: (&u)" + +#: kpppwidget.cpp:102 +msgid "C&onnect to: " +msgstr "को कनेक्टः (&o)" + +#: kpppwidget.cpp:112 +#, fuzzy +msgid "Use &modem: " +msgstr "मॉडम रीसेट करें" + +#: kpppwidget.cpp:122 +msgid "&Login ID:" +msgstr "लॉगइन आईडी: (&L)" + +#: kpppwidget.cpp:131 +msgid "" +"

Type in the username that you got from your\n" +"ISP. This is especially important for PAP\n" +"and CHAP. You may omit this when you use\n" +"terminal-based or script-based authentication.\n" +"\n" +"Important: case is important here:\n" +"myusername is not the same as MyUserName." +msgstr "" + +#: kpppwidget.cpp:142 +msgid "&Password:" +msgstr "पासवर्ड: (&P)" + +#: kpppwidget.cpp:152 +msgid "" +"

Type in the password that you got from your\n" +"ISP. This is especially important for PAP\n" +"and CHAP. You may omit this when you use\n" +"terminal-based or script-based authentication.\n" +"\n" +"Important: case is important here:\n" +"mypassword is not the same as MyPassword." +msgstr "" + +#: kpppwidget.cpp:168 +msgid "Show lo&g window" +msgstr "लॉग विंडो दिखाएँ (&g)" + +#: kpppwidget.cpp:175 +msgid "" +"

This controls whether a log window is shown.\n" +"A log window shows the communication between\n" +"kppp and your modem. This will help you\n" +"in tracking down problems.\n" +"\n" +"Turn it off if kppp routinely connects without\n" +"problems" +msgstr "" + +#: kpppwidget.cpp:195 +msgid "Co&nfigure..." +msgstr "कॉन्फ़िगर... (&n)" + +#: kpppwidget.cpp:212 +msgid "&Connect" +msgstr "कनेक्ट (&C)" + +#: kpppwidget.cpp:308 +msgid "" +"No such Modem:\n" +"%1\n" +"Falling back to default" +msgstr "" + +#: kpppwidget.cpp:318 +#, c-format +msgid "" +"No such Account:\n" +"%1" +msgstr "" +"ऐसा कोई ख़ाता नहीं:\n" +"%1" + +#: kpppwidget.cpp:384 +msgid "KPPP Configuration" +msgstr "के-पीपीपी कॉन्फ़िगरेशन" + +#: kpppwidget.cpp:393 +msgid "&Accounts" +msgstr "खाते (&A)" + +#: kpppwidget.cpp:393 +msgid "Account Setup" +msgstr "खाता सेटअप" + +#: kpppwidget.cpp:401 +#, fuzzy +msgid "&Modems" +msgstr "मॉडेम (&M)" + +#: kpppwidget.cpp:401 +#, fuzzy +msgid "Modems Setup" +msgstr "मॉडम विन्यास" + +#: kpppwidget.cpp:405 +msgid "&Graph" +msgstr "ग्राफ (&G)" + +#: kpppwidget.cpp:405 +msgid "Throughput Graph" +msgstr "थ्रोपुट ग्राफ" + +#: kpppwidget.cpp:406 +msgid "M&isc" +msgstr "विविध (&i)" + +#: kpppwidget.cpp:406 +msgid "Miscellaneous Settings" +msgstr "विविध विन्यास" + +#: kpppwidget.cpp:616 +msgid "Timeout expired while waiting for the PPP interface to come up." +msgstr "" + +#: kpppwidget.cpp:619 +msgid "

The pppd daemon died unexpectedly!

" +msgstr "

पीपीपीडी डेमन अप्रत्याशित रूप से बन्द हो गया!

" + +#: kpppwidget.cpp:622 +#, c-format +msgid "

Exit status: %1" +msgstr "

बाहर स्थिति: %1" + +#: kpppwidget.cpp:623 +msgid "" +"

" +"

See 'man pppd' for an explanation of the error codes or take a look at the " +"kppp FAQ on %2

" +msgstr "" + +#: kpppwidget.cpp:631 +#, fuzzy +msgid "&Details" +msgstr "विवरण" + +#: kpppwidget.cpp:664 +msgid "" +"kppp's helper process just died.\n" +"Since further execution would be pointless, kppp will shut down now." +msgstr "" + +#: kpppwidget.cpp:706 +msgid "" +"Cannot find the PPP daemon!\n" +"Make sure that pppd is installed and that you have entered the correct path." +msgstr "" + +#: kpppwidget.cpp:715 +msgid "" +"kppp cannot execute:\n" +" %1\n" +"Please make sure that you have given kppp setuid permission and that pppd is " +"executable." +msgstr "" + +#: kpppwidget.cpp:736 +msgid "" +"kppp can not find:\n" +" %1\n" +"Please make sure you have setup your modem device properly and/or adjust the " +"location of the modem device on the modem tab of the setup dialog." +msgstr "" + +#: kpppwidget.cpp:753 +msgid "" +"You have selected the authentication method PAP or CHAP. This requires that you " +"supply a username and a password." +msgstr "" + +#: kpppwidget.cpp:762 +msgid "" +"Cannot create PAP/CHAP authentication\n" +"file \"%1\"" +msgstr "" +"पीएपी/सीएचएपी प्रमाणीकरण फ़ाइल \"%1\"\n" +"तैयार नहीं कर सकता" + +#: kpppwidget.cpp:771 +#, fuzzy +msgid "You must specify a telephone number." +msgstr "आपको एक दूरभाष क्रमांक उल्लेखित करना होगा!" + +#: kpppwidget.cpp:804 +msgid "Disconnecting..." +msgstr "डिस्कनेक्ट हो रहे..." + +#: kpppwidget.cpp:807 +msgid "Executing command before disconnection." +msgstr "डिस्कनेक्ट करने से पहले कमांड चलाएँ" + +#: kpppwidget.cpp:821 +#, fuzzy +msgid "Announcing disconnection." +msgstr "डिस्कनेक्ट पर बाहर हों (&Q)" + +#: kpppwidget.cpp:873 +msgid "Exiting kPPP will close your PPP Session." +msgstr "के-पीपीपी से बाहर होने पर आपका पीपीपी सत्र बन्द होगा." + +#: kpppwidget.cpp:874 +msgid "Quit kPPP?" +msgstr "के-पीपीपी से बाहर हों?" + +#: kpppwidget.cpp:924 +#, fuzzy +msgid "Can not load the accounting ruleset \"%1\"." +msgstr "लेखा रूलसेट \"%1\" लोड नहीं कर सका!" + +#: kpppwidget.cpp:1014 +msgid "Recent Changes in KPPP" +msgstr "के-पीपीपी में हालिया परिवर्तन" + +#: kpppwidget.cpp:1027 +msgid "" +"From version 1.4.8 on, kppp has a new feature\n" +"called \"Quickhelp\". It's similar to a tooltip,\n" +"but you can activate it whenever you want.\n" +"\n" +"To activate it, simply click on a control like\n" +"a button or a label with the right mouse button.\n" +"If the item supports Quickhelp, a popup menu\n" +"will appear leading to Quickhelp.\n" +"\n" +"To test it, right-click somewhere in this text." +msgstr "" + +#: kpppwidget.cpp:1039 +msgid "Don't show this hint again" +msgstr "इस संकेत को दुबारा न दिखाएँ" + +#: kpppwidget.cpp:1055 +msgid "" +"This is an example of QuickHelp.\n" +"This window will stay open until you\n" +"click a mouse button or a press a key.\n" +msgstr "" + +#: loginterm.cpp:99 +msgid "Login Terminal Window" +msgstr "लॉगइन टर्मिनल विंडो" + +#: main.cpp:66 +#, fuzzy +msgid "A dialer and front-end to pppd" +msgstr "पीपीडी के लिए डायलर फ्रन्ट-एण्ड." + +#: main.cpp:70 +msgid "Connect using 'account_name'" +msgstr "'खाता-नाम' का प्रयोग कर कनेक्ट हों" + +#: main.cpp:71 +#, fuzzy +msgid "Connect using 'modem_name'" +msgstr "'खाता-नाम' का प्रयोग कर कनेक्ट हों" + +#: main.cpp:72 +msgid "Terminate an existing connection" +msgstr "उपलब्ध कनेक्शन बन्द करें" + +#: main.cpp:73 +msgid "Quit after end of connection" +msgstr "कनेक्शन ख़त्म होने के बाद बाहर हों" + +#: main.cpp:74 +msgid "Check syntax of rule_file" +msgstr "नियम-फ़ाइल का सिंटेक्स जाँचें" + +#: main.cpp:75 +msgid "Enable test-mode" +msgstr "टेस्ट-मोड सक्षम करें" + +#: main.cpp:76 +msgid "Use the specified device" +msgstr "" + +#: main.cpp:203 +msgid "KPPP" +msgstr "केपीपीपी" + +#: main.cpp:205 +msgid "(c) 1999-2002, The KPPP Developers" +msgstr "(c) 1999-2002, केपीपीपी डेवलपर्स" + +#: main.cpp:206 +msgid "Current maintainer" +msgstr "वर्तमान मेंटेनर" + +#: main.cpp:207 +msgid "Original author" +msgstr "मूल लेखक" + +#: main.cpp:244 +#, c-format +msgid "" +"kppp can't create or read from\n" +"%1." +msgstr "" +"केपीपीपी बना या पढ़ नहीं सका\n" +"%1 से." + +#: main.cpp:275 +msgid "" +"kppp has detected a %1 file.\n" +"Another instance of kppp seems to be running under process-ID %2.\n" +"Please click Exit, make sure that you are not running another kppp, delete the " +"pid file, and restart kppp.\n" +"Alternatively, if you have determined that there is no other kppp running, " +"please click Continue to begin." +msgstr "" + +#: main.cpp:286 +msgid "Exit" +msgstr "बाहर" + +#: miniterm.cpp:53 +msgid "Kppp Mini-Terminal" +msgstr "के-पीपीपी मिनी-टर्मिनल" + +#: miniterm.cpp:59 +msgid "&Reset Modem" +msgstr "मॉडम रीसेट करें (&R)" + +#: miniterm.cpp:62 +msgid "" +"MiniTerm - A terminal emulation for KPPP\n" +"\n" +"(c) 1997 Bernd Johannes Wuebben \n" +"(c) 1998 Harri Porten \n" +"(c) 1998 Mario Weilguni \n" +"\n" +"This program is published under the GNU GPL\n" +"(GNU General Public License)" +msgstr "" + +#: miniterm.cpp:72 modems.cpp:226 +msgid "&Modem" +msgstr "मॉडेम (&M)" + +#: miniterm.cpp:107 +msgid "Close MiniTerm" +msgstr "मिनी-टर्म बन्द करें" + +#: miniterm.cpp:111 +msgid "Reset Modem" +msgstr "मॉडम रीसेट करें" + +#: miniterm.cpp:125 +msgid "Initializing Modem" +msgstr "मॉडम प्रारंभ किया जा रहा है..." + +#: miniterm.cpp:151 miniterm.cpp:213 modeminfo.cpp:145 +msgid "Modem Ready" +msgstr "मॉडम तैयार है." + +#: miniterm.cpp:192 +msgid "Hanging up..." +msgstr "हैंगिंग अप..." + +#: miniterm.cpp:206 +msgid "Resetting Modem" +msgstr "मॉडम रीसेट किया जा रहा है..." + +#: modem.cpp:131 +msgid "Unable to open modem." +msgstr "मॉडम खोलने में अक्षम." + +#: modem.cpp:138 +msgid "Unable to detect state of CD line." +msgstr "सीडी लाइन की स्थिति पता लगाने में अक्षम." + +#: modem.cpp:144 +msgid "The modem is not ready." +msgstr "मॉडम तैयार नहीं है." + +#: modem.cpp:160 modem.cpp:208 +msgid "The modem is busy." +msgstr "मॉडम व्यस्त है." + +#: modem.cpp:214 +msgid "Modem Ready." +msgstr "मॉडम तैयार है." + +#: modem.cpp:226 +msgid "" +"Can't restore tty settings: tcsetattr()\n" +msgstr "" +"tty विन्यास बहाल नहीं करें: tcsetattr()\n" + +#: modem.cpp:381 +msgid "The modem does not respond." +msgstr "मॉडम प्रतिक्रिया नहीं दे रहा है." + +#: modem.cpp:520 +msgid "Unknown speed" +msgstr "अज्ञात गति" + +#: modemcmds.cpp:49 +msgid "Edit Modem Commands" +msgstr "मॉडम कमांड का संपादन करें" + +#: modemcmds.cpp:81 +msgid "Pre-init delay (sec/100):" +msgstr "प्री-इनिट देरी (सेक./100):" + +#: modemcmds.cpp:86 +msgid "Initialization string %1:" +msgstr "इनिशियलाइजेशन स्ट्रिंग %1:" + +#: modemcmds.cpp:105 +msgid "Post-init delay (sec/100):" +msgstr "पोस्ट-इनिट देरी (सेक./100):" + +#: modemcmds.cpp:121 +msgid "Dialing speed (sec/100):" +msgstr "डायलिंग गति (सेक./100):" + +#: modemcmds.cpp:126 +msgid "Init &response:" +msgstr "इनिट जवाबः (&r)" + +#: modemcmds.cpp:133 +msgid "No di&al tone detection:" +msgstr "डायल टोन पता नहीं लगाएँ: (&a)" + +#: modemcmds.cpp:140 +msgid "Dial &string:" +msgstr "डायल स्ट्रिंग (&s)" + +#: modemcmds.cpp:147 +msgid "Co&nnect response:" +msgstr "कनेक्ट जवाबः (&n)" + +#: modemcmds.cpp:154 +msgid "Busy response:" +msgstr "व्यस्त जवाबः" + +#: modemcmds.cpp:160 +msgid "No carr&ier response:" +msgstr "कोई कैरियर जवाब नहीं: (&i)" + +#: modemcmds.cpp:167 +msgid "No dial tone response:" +msgstr "कोई डायलटोन जवाब नहीं:" + +#: modemcmds.cpp:173 +msgid "&Hangup string:" +msgstr "हैंगअप स्ट्रिंगः (&H)" + +#: modemcmds.cpp:180 +msgid "Hangup response:" +msgstr "हैंगअप जवाबः" + +#: modemcmds.cpp:186 +msgid "Answ&er string:" +msgstr "उत्तर स्ट्रिंगः (&e)" + +#: modemcmds.cpp:193 +msgid "Ring response:" +msgstr "रिंग जवाबः" + +#: modemcmds.cpp:199 +msgid "Ans&wer response:" +msgstr "जवाब उत्तरः (&w)" + +#: modemcmds.cpp:206 +msgid "DLP response:" +msgstr "डीएलपी जवाबः" + +#: modemcmds.cpp:212 +msgid "Escape strin&g:" +msgstr "एस्केप स्ट्रिंगः (&g)" + +#: modemcmds.cpp:219 +msgid "Escape response:" +msgstr "एस्केप जवाबः" + +#: modemcmds.cpp:237 +msgid "Guard time (sec/50):" +msgstr "गार्ड समय (सेक./50):" + +#: modemcmds.cpp:240 +msgid "Volume off/low/high:" +msgstr "आवाज़ बन्द/कम/ज्यादा:" + +#: modemdb.cpp:47 +msgid "Select Modem Type" +msgstr "मॉडम क़िस्म चुनें" + +#: modemdb.cpp:49 +msgid "" +"To set up your modem, first choose its vendor in the list to the left, and then " +"select the model from the right list. If you don't know which modem you have, " +"you can try out one of the \"Generic\" modems." +msgstr "" + +#: modemdb.cpp:149 modemdb.cpp:151 modemdb.cpp:222 modemdb.cpp:237 +msgid "" +msgstr "<जेनेरिक>" + +#: modemdb.cpp:219 +msgid "Hayes(tm) compatible modem" +msgstr "हेयस(टीएम) संगत मॉडम" + +#: modeminfo.cpp:41 +msgid "ATI Query" +msgstr "एटीआई क्वेरी" + +#: modeminfo.cpp:117 +msgid "Modem query timed out." +msgstr "मॉडम क्वैरी टाइम आउट हो गया." + +#: modeminfo.cpp:248 +msgid "Modem Query Results" +msgstr "मॉडम क्वैरी परिणाम" + +#: modems.cpp:149 modems.cpp:173 +#, fuzzy +msgid "Maximum number of modems reached." +msgstr "खातों की अधिकतम संख्या आ चुकी" + +#: modems.cpp:178 +#, fuzzy +msgid "No modem selected." +msgstr "कोई ख़ाता चुने गए नहीं." + +#: modems.cpp:192 +#, fuzzy +msgid "" +"Are you sure you want to delete\n" +"the modem \"%1\"?" +msgstr "" +"क्या आप वाक़ई\n" +"खाता\"%1\" को मिटाना चाहते हैं?" + +#: modems.cpp:217 +#, fuzzy +msgid "New Modem" +msgstr "मॉडम रीसेट करें" + +#: modems.cpp:220 +#, fuzzy +msgid "Edit Modem: " +msgstr "मॉडम कमांड का संपादन करें" + +#: modems.cpp:225 +msgid "&Device" +msgstr "उपकरण (&D)" + +#: modems.cpp:225 +msgid "Serial Device" +msgstr "सीरियल उपकरण" + +#: modems.cpp:226 +msgid "Modem Settings" +msgstr "मॉडम विन्यास" + +#: modems.cpp:241 +#, fuzzy +msgid "" +"You must enter a unique\n" +"modem name" +msgstr "" +"आपको एक विशिष्ट\n" +"खाता नाम प्रविष्ट करना होगा" + +#: pppdargs.cpp:46 +msgid "Customize pppd Arguments" +msgstr "मनपसंद पीपीपीडी आर्गुमेंट्स" + +#: pppdargs.cpp:59 +msgid "Arg&ument:" +msgstr "आर्गुमेंटः (&u)" + +#: pppdata.cpp:63 +msgid "" +"The application-specific config file could not be opened in either read-write " +"or read-only mode.\n" +"The superuser might have to change its ownership by issuing the following " +"command in your home directory:\n" +"chown {YourUsername} .kde/share/config/kppprc" +msgstr "" + +#: pppdata.cpp:501 pppdata.cpp:1029 +msgid "%1_copy" +msgstr "%1_नक़ल" + +#: ppplog.cpp:61 +msgid "Cannot open any of the following logfiles:" +msgstr "निम्न में से किसी भी लॉग फ़ाइल को खोल नहीं सकाः" + +#: ppplog.cpp:135 +msgid "" +"You have launched pppd before the remote server was ready to establish a PPP " +"connection.\n" +"Please use the terminal-based login to verify" +msgstr "" + +#: ppplog.cpp:140 +msgid "You haven't started the PPP software on the peer system." +msgstr "आपने पीअर तंत्र में पीपीपी सॉफ्टवेयर प्रारंभ नहीं किया है." + +#: ppplog.cpp:143 +#, fuzzy +msgid "Check that you supplied the correct username and password." +msgstr "जाँचें कि आपने सही उपयोक्ता नाम और पासवर्ड दिया है!" + +#: ppplog.cpp:146 +msgid "" +"You shouldn't pass 'lock' as an argument to pppd. Check /etc/ppp/options and " +"~/.ppprc" +msgstr "" + +#: ppplog.cpp:150 +msgid "" +"The remote system does not seem to answer to\n" +"configuration request. Contact your provider." +msgstr "" + +#: ppplog.cpp:154 +msgid "" +"You have passed an invalid option to pppd. See 'man pppd' for a complete list " +"of valid arguments." +msgstr "" + +#: ppplog.cpp:172 +msgid "" +"Notice that the remote system has sent the following message:\n" +"\"%1\"\n" +"This may give you a hint why the the connection has failed." +msgstr "" + +#: ppplog.cpp:191 +msgid "Unable to provide help." +msgstr "मदद प्रदान करने में असमर्थ रहा." + +#: ppplog.cpp:215 +msgid "" +"KPPP could not prepare a PPP log. It's very likely that pppd was started " +"without the \"debug\" option.\n" +"Without this option it's difficult to find out PPP problems, so you should turn " +"on the debug option.\n" +"Shall I turn it on now?" +msgstr "" + +#: ppplog.cpp:219 +#, fuzzy +msgid "Restart pppd" +msgstr "पीपीडी चालू किया जा रहा है..." + +#: ppplog.cpp:219 +msgid "Do Not Restart" +msgstr "" + +#: ppplog.cpp:224 +msgid "" +"The \"debug\" option has been added. You should now try to reconnect. If that " +"fails again, you will get a PPP log that may help you to track down the " +"connection problem." +msgstr "" + +#: ppplog.cpp:238 +msgid "PPP Log" +msgstr "पीपीपी लॉग" + +#: ppplog.cpp:242 +msgid "kppp's diagnosis (just guessing):" +msgstr "के-पीपीपी का निदान (सिर्फ अनुमान लगा रहे):" + +#: ppplog.cpp:247 +msgid "Write to File" +msgstr "फ़ाइल पर लिखें" + +#: ppplog.cpp:281 +msgid "" +"The PPP log has been saved\n" +"as \"%1\"!\n" +"\n" +"If you want to send a bug report, or have\n" +"problems connecting to the Internet, please\n" +"attach this file. It will help the maintainers\n" +"to find the bug and to improve KPPP" +msgstr "" + +#: pppstatdlg.cpp:55 +msgid "kppp Statistics" +msgstr "के-पीपीपी आंकड़े" + +#: pppstatdlg.cpp:61 +msgid "Statistics" +msgstr "आंकड़े" + +#: pppstatdlg.cpp:89 +msgid "Local Addr:" +msgstr "स्थानीय पताः" + +#: pppstatdlg.cpp:95 +msgid "Remote Addr:" +msgstr "रिमोट पताः" + +#: pppstatdlg.cpp:122 +msgid "bytes in" +msgstr "बाइट्स आए" + +#: pppstatdlg.cpp:123 +msgid "bytes out" +msgstr "बाइट्स गए" + +#: pppstatdlg.cpp:125 +msgid "packets in" +msgstr "पैकेट्स आए" + +#: pppstatdlg.cpp:126 +msgid "packets out" +msgstr "पैकेट्स गए" + +#: pppstatdlg.cpp:128 +msgid "vjcomp in" +msgstr "वीजेकॉम्प आए" + +#: pppstatdlg.cpp:129 +msgid "vjcomp out" +msgstr "वीजेकॉम्प गए" + +#: pppstatdlg.cpp:131 +msgid "vjunc in" +msgstr "वीजंक आए" + +#: pppstatdlg.cpp:132 +msgid "vjunc out" +msgstr "वीजंक गए" + +#: pppstatdlg.cpp:134 +msgid "vjerr" +msgstr "vjerr" + +#: pppstatdlg.cpp:135 +msgid "non-vj" +msgstr "नॉन-वीजे" + +#: pppstatdlg.cpp:292 +msgid "%1 (max. %2) kb/sec" +msgstr "%1 (अधि. %2) केबी/सेक." + +#: pppstatdlg.cpp:408 pppstatdlg.cpp:415 +msgid "unavailable" +msgstr "अनुपलब्ध " + +#: providerdb.cpp:168 +msgid "" +"You will be asked a few questions on information\n" +"which is needed to establish an Internet connection\n" +"with your Internet Service Provider (ISP).\n" +"\n" +"Make sure you have the registration form from your\n" +"ISP handy. If you have any problems, try the online\n" +"help first. If any information is missing, contact\n" +"your ISP." +msgstr "" + +#: providerdb.cpp:186 +msgid "" +"Select the location where you plan to use this\n" +"account from the list below. If your country or\n" +"location is not listed, you have to create the\n" +"account with the normal, dialog based setup.\n" +"\n" +"If you click \"Cancel\", the dialog based setup\n" +"will start." +msgstr "" + +#: providerdb.cpp:264 +msgid "" +"Select your Internet Service Provider (ISP) from\n" +"the list below. If the ISP is not in this list,\n" +"you have to click on \"Cancel\" and create this\n" +"account using the normal, dialog-based setup.\n" +"\n" +"Click on \"Next\" when you have finished your\n" +"selection." +msgstr "" + +#: providerdb.cpp:339 +msgid "" +"To log on to your ISP, kppp needs the username\n" +"and the password you got from your ISP. Type\n" +"in this information in the fields below.\n" +"\n" +"Word case is important here." +msgstr "" + +#: providerdb.cpp:348 +msgid "Username:" +msgstr "उपयोक्ता नाम:" + +#: providerdb.cpp:350 +msgid "Password:" +msgstr "पासवर्ड: " + +#: providerdb.cpp:393 +msgid "" +"If you need a special dial prefix (e.g. if you\n" +"are using a telephone switch) you can specify\n" +"it here. This prefix is dialed just before the\n" +"phone number.\n" +"\n" +"If you have a telephone switch, you probably need\n" +"to write \"0\" or \"0,\" here." +msgstr "" + +#: providerdb.cpp:404 +msgid "Dial prefix:" +msgstr "डायल उपसर्गः" + +#: providerdb.cpp:429 +msgid "" +"Finished!\n" +"\n" +"A new account has been created. Click \"Finish\" to\n" +"go back to the setup dialog. If you want to\n" +"check the settings of the newly created account,\n" +"you can use \"Edit\" in the setup dialog." +msgstr "" + +#: ruleset.cpp:538 +msgid "" +"kppp: no rulefile specified\n" +msgstr "" +"के-पीपीपीः कोई नियम-फ़ाइल निर्दिष्ट नहीं है\n" + +#: ruleset.cpp:544 +#, c-format +msgid "" +"kppp: rulefile \"%s\" not found\n" +msgstr "" +"के-पीपीपी: नियमफ़ाइल \"%s\" नहीं मिला\n" + +#: ruleset.cpp:549 +msgid "" +"kppp: rulefiles must have the extension \".rst\"\n" +msgstr "" +"के-पीपीपी: नियमफ़ाइल में एक्सटेंशन होना चाहिए \".rst\"\n" + +#: ruleset.cpp:558 +msgid "" +"kppp: error parsing the ruleset\n" +msgstr "" +"के-पीपीपी: रूलसेट पारसिंग करने में त्रुटि\n" + +#: ruleset.cpp:563 +#, c-format +msgid "" +"kppp: parse error in line %d\n" +msgstr "" +"के-पीपीपी: पारसिंग त्रुटि पंक्ति %d पर\n" + +#: ruleset.cpp:569 +msgid "" +"kppp: rulefile does not contain a default rule\n" +msgstr "" +"के-पीपीपी: नियमफ़ाइल में डिफ़ॉल्ट नियम नहीं है\n" + +#: ruleset.cpp:574 +msgid "" +"kppp: rulefile does not contain a \"name=...\" line\n" +msgstr "" +"के-पीपीपी: नियमफ़ाइल में \"name=...\" पंक्ति नहीं है\n" + +#: ruleset.cpp:578 +msgid "" +"kppp: rulefile is ok\n" +msgstr "" +"के-पीपीपी: नियमफ़ाइल ठीक है\n" + +#: runtests.cpp:219 +msgid "" +"You're not allowed to dial out with kppp.\n" +"Contact your system administrator." +msgstr "" + +#: runtests.cpp:230 +msgid "" +"Cannot find the PPP daemon!\n" +"Make sure that pppd is installed." +msgstr "" +"पीपीपी डेमन नहीं मिला!\n" +"सुनिश्चित हों कि पीपीपीडी संस्थापित है." + +#: runtests.cpp:240 +msgid "" +"You do not have the permission to start pppd!\n" +"Contact your system administrator and ask to get access to pppd." +msgstr "" + +#: runtests.cpp:253 +msgid "" +"You don't have sufficient permission to run\n" +"%1\n" +"Please make sure that kppp is owned by root and has the SUID bit set." +msgstr "" + +#: runtests.cpp:265 +msgid "" +"%1 is missing or can't be read!\n" +"Ask your system administrator to create this file (can be empty) with " +"appropriate read and write permissions." +msgstr "" + +#~ msgid "&Details..." +#~ msgstr "विवरण... (&D)" -- cgit v1.2.1