From ff4fa4a4bcbcb8f46cd9231b0a5f3b3d19f5989c Mon Sep 17 00:00:00 2001
From: Automated System %2 %2 Use this combo box to select the printer to which you want to print. "
-"Initially (if you run TDEPrint for the first time), you may only find the "
-"TDE special printers (which save jobs to disk [as PostScript- or "
-"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
-"a real printer, you need to... "
-" Note: It may happen that you successfully connected to a remote CUPS "
-"server and still do not get a printer list. If this happens: force TDEPrint to "
-"re-load its configuration files. To reload the configuration files, either "
-"start kprinter again, or use the switch the print system away from CUPS and "
-"back again once. The print system switch can be made through a selection in "
-"the drop-down menu at bottom of this dialog when fully expanded). This button opens a dialog where you can make decisions regarding all "
-"supported print job options. This button reduces the list of visible printers to a shorter, more "
-"convenient, pre-defined list. This is particularly useful in enterprise environments with lots of "
-"printers. The default is to show all printers. To create a personal 'selective view list', click on the "
-"'System Options' button at the bottom of this dialog. Then, in the new "
-"dialog, select 'Filter' (left column in the "
-"TDE Print Configuration dialog) and setup your selection.. Warning: Clicking this button without prior creation of a personal "
-"'selective view list' will make all printers dissappear from the "
-"view. (To re-enable all printers, just click this button again.) This button starts the TDE Add Printer Wizard. Use the Wizard (with \"CUPS\" or \"RLPR\""
-") to add locally defined printers to your system. Note: The TDE Add Printer Wizard does not "
-"work, and this button is disabled if you use \"Generic LPD\", "
-"\"LPRng\", or \"Print Through an External Program\".) Here you can enter any command that would also print for you in a "
-"konsole window. This button shows or hides additional printing options. This button starts a new dialog where you can adjust various settings of "
-"your printing system. Amongst them: "
-" \"General\" This dialog page contains general print job settings. General "
+"settings are applicable to most printers, most jobs and most job file types. "
+" To get more specific help, enable the \"WhatsThis\" cursor and click on any "
+"of the text labels or GUI elements of this dialog. If you enable this checkbox, the printing dialog stays open after you hit "
-"the Print button. This is especially useful, if you need to test various print settings (like "
-"color matching for an inkjet printer) or if you want to send your job to "
-"multiple printers (one after the other) to have it finished more quickly. Page size: Select paper size to be printed on from the drop-down "
+"menu. The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed. Additional hint for power users: This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter: "
+" "
-"
"
-"a2ps -P <printername> --medium=A3
. "
-"
"
-"and many more....
"
+"
"
+" -o PageSize=... # examples: \"A4\" or \"Letter\"
Paper type: Select paper type to be printed on from the drop-down " +"menu.
" +"The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " +"from the drop-down menu. " +"
The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " +"
Image Orientation: Orientation of the printed page image on your " +"paper is controlled by the radio buttons. By default, the orientation is " +"Portrait " +"
You can select 4 alternatives: " +"
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o orientation-requested=... # examples: \"landscape\" or " +"\"reverse-portrait\"
This button calls the \"File Open / Browse Directories\" dialog to allow you " -"to select a file for printing. Note, that " -"
Duplex Printing: These controls may be grayed out if your printer " +"does not support duplex printing (i.e. printing on both sides of the " +"sheet). These controls are active if your printer supports duplex printing. " +"
You can choose from 3 alternatives:
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " +"
Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside TDE applications. If you start " -"kprinter from the commandline, or if you use kprinter as a print command for " -"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " -"preview is not available here.
Banner Page(s): Select banner(s) to print one or two special sheets " +"of paper just before or after your main job.
" +"Banners may contain some pieces of job information, such as user name, time " +"of printing, job title and more.
" +"Banner pages are useful to separate different jobs more easily, especially " +"in a multi-user environment.
" +"Hint: You can design your own banner pages. To make use of " +"them, just put the banner file into the standard CUPS banners " +"directory (This is usually \"/usr/share/cups/banner/\" " +"Your custom banner(s) must have one of the supported printable formats. " +"Supported formats are ASCII text, PostScript, PDF and nearly any image format " +"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " +"menu after a restart of CUPS.
" +"CUPS comes with a selection of banner pages.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " +"
Note: (Button is only visible if the checkbox for " -"System Options --> General --> Miscellaneous: " -"\"Defaults to the last printer used in the application\" " -"is disabled.)
Pages per Sheet: You can choose to print more than one page onto " +"each sheet of paper. This is sometimes useful to save paper.
" +"Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. Be aware, that some printers can " +"by themselves print multiple pages per sheet. In this case you find the option " +"in the printer driver settings. Be careful: if you enable multiple pages per " +"sheet in both places, your printout will not look as you intended.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o number-up=... # examples: \"2\" or \"4\"
%2
" -msgstr "%1: izvršavanje prekinuto s porukom:%2
" +#: management/kxmlcommandselector.cpp:247 +msgid "not allowed" +msgstr "nije dozvoljeno" -#: lpr/kmlprjobmanager.cpp:83 -msgid "Unsupported operation." -msgstr "Postupak nije podržan." +#: management/kxmlcommandselector.cpp:253 +msgid "(Unavailable: requirements not satisfied)" +msgstr "(Nedostupno: zahtjevi nisu zadovoljeni)" -#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 -msgid "Spooler" -msgstr "Sakupljač" +#: management/kmwsmb.cpp:35 +msgid "SMB Printer Settings" +msgstr "Postavke dijeljenog (SMB) pisača" -#: lpr/kmconfiglpr.cpp:34 -msgid "Spooler Settings" -msgstr "Postavke posrednika pisača" +#: management/kmwsmb.cpp:41 +msgid "Scan" +msgstr "Pretraži" -#: lpr/kmlprmanager.cpp:289 -msgid "The printcap file is a remote file (NIS). It cannot be written." -msgstr "" -"Datoeka printcap je udaljena detoteka (NIS). U nju se ne može zapisivati." +#: management/kmwsmb.cpp:42 +msgid "Abort" +msgstr "Prekid" -#: lpr/kmlprmanager.cpp:305 -msgid "" -"Unable to save printcap file. Check that you have write permissions for that " -"file." -msgstr "" -"Nije moguće spremiti datoteku printcap. Provjerite imate li pravo zapisivanja " -"za tu datoteku." +#: management/kmwsmb.cpp:44 +msgid "Workgroup:" +msgstr "Radna grupa:" -#: lpr/kmlprmanager.cpp:330 -msgid "Internal error: no handler defined." -msgstr "Interna pogreška: Rukovanje nije deifnirano." +#: management/kmwsmb.cpp:45 +msgid "Server:" +msgstr "Poslužitelj:" -#: lpr/kmlprmanager.cpp:344 -msgid "Couldn't determine spool directory. See options dialog." -msgstr "" -"Nije moguće utvrditi lokaciju mape prikupljanja. Pogledajte dijalog opcija." +#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 +msgid "Printer:" +msgstr "Pisač:" -#: lpr/kmlprmanager.cpp:350 -msgid "" -"Unable to create the spool directory %1. Check that you have the required " -"permissions for that operation." -msgstr "" -"Nije moguće izraditi mapu prikupljanja %1. Provjerite imate li dopuštenja za " -"taj postupak." +#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 +msgid "Empty server name." +msgstr "Prazno ime poslužitelja." -#: lpr/kmlprmanager.cpp:382 -#, c-format -msgid "" -"The printer has been created but the print daemon could not be restarted. %1" -msgstr "" -"Pisač je izrađen, ali demon ispisivanja nije moguće ponovo pokrenuti. %1" +#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 +msgid "Empty printer name." +msgstr "Prazno ime pisača." -#: lpr/kmlprmanager.cpp:410 -msgid "" -"Unable to remove spool directory %1. Check that you have write permissions for " -"that directory." -msgstr "" -"Nije moguće ukloniti mapu prikupljanja %1. Provjerite imate li dopuštenja " -"zapisivanja u tu mapu." +#: management/kmwsmb.cpp:99 +#, c-format +msgid "Login: %1" +msgstr "Prijava: %1" -#: lpr/kmlprmanager.cpp:458 -msgid "&Edit printcap Entry..." -msgstr "&Uredi printcap zapis..." +#: management/kmwsmb.cpp:99 +msgid "Characters Per Inch
" -"This setting controls the horizontal size of characters when printing a text " -"file.
" -"The default value is 10, meaning that the font is scaled in a way that 10 " -"characters per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" -"This setting controls the vertical size of characters when printing a text " -"file.
" -"The default value is 6, meaning that the font is scaled in a way that 6 " -"lines per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o lpi=... # example \"5\" or \"7\"
Columns
" -"This setting controls how many columns of text will be printed on each page " -"when. printing text files.
" -"The default value is 1, meaning that only one column of text per page will " -"be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" -"These settings control the appearance of text on printouts. They are only " -"valid for printing text files or input directly through kprinter.
" -"Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " -"Text Editor. (Applications in general send PostScript to the print system, and " -"'kate' in particular has its own knobs to control the print output.
. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\" " -"
-o lpi=... # example: \"5\" or \"7\" " -"
-o columns=... # example: \"2\" or \"4\"
Margins
" -"These settings control the margins of printouts on the paper. They are not " -"valid for jobs originating from applications which define their own page " -"layout internally and send PostScript to TDEPrint (such as KOffice or " -"OpenOffice.org).
" -"When printing from KDE applications, such as KMail and Konqueror, or " -"printing an ASCII text file through kprinter, you can choose your preferred " -"margin settings here.
" -"Margins may be set individually for each edge of the paper. The combo box at " -"the bottom lets you change the units of measurement between Pixels, " -"Millimeters, Centimeters, and Inches.
" -"You can even use the mouse to grab one margin and drag it to the intended " -"position (see the preview picture on the right side).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # example: \"72\" " -"
-o page-bottom=... # example: \"24\" " -"
-o page-left=... # example: \"36\" " -"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" -"ASCII text file printouts can be 'prettyfied' by enabling this option. If " -"you do so, a header is printed at the top of each page. The header contains " -"the page number, job title (usually the filename), and the date. In addition, C " -"and C++ keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true.
This backend may require a login/password to work properly. Select the type " +"of access to use and fill in the login and password entries if needed.
" msgstr "" -#: cups/kptextpage.cpp:153 -msgid "" -"Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" -"ASCII text file printing with this option turned off are appearing without a " -"page header and without syntax highlighting. (You can still set the page " -"margins, though.)
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" -"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " -"so, a header is printed at the top of each page. The header contains the page " -"number, job title (usually the filename), and the date. In addition, C and C++ " -"keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true. " -"
-o prettyprint=false
The 'blackplot' option specifies that all pens should plot in black-only: " -"The default is to use the colors defined in the plot file, or the standard pen " -"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o blackplot=true
Now you can test the printer before finishing installation. Use the " +"Settings button to configure the printer driver and the Test " +"button to test your configuration. Use the Back " +"button to change the driver (your current configuration will be discarded).
" msgstr "" +"Sada možete probati pisač prije negoli završite postavljanje. Koristite " +"Postavke gumb za podešavanje pisača i Proba " +"gumb za probanje postavki. Koristite Natrag gumb za promjenu " +"upravljačkog programa, pri čemu će sve sadašnje postavke biti odbačene.
" -#: cups/kphpgl2page.cpp:48 +#: management/kmwdrivertest.cpp:117 +msgid "%1
%1
The 'fitplot' option specifies that the HP-GL image should be scaled to fill " -" exactly the page with the (elsewhere selected) media size.
" -"The default is 'fitplot is disabled'. The default will therefore use the " -"absolute distances specified in the plot file. (You should be aware that HP-GL " -"files are very often CAD drawings intended for large format plotters. On " -"standard office printers they will therefore lead to the drawing printout " -"being spread across multiple pages.)
" -"Note:This feature depends upon an accurate plot size (PS) command in " -"the HP-GL/2 file. If no plot size is given in the file the filter converting " -"the HP-GL to PostScript assumes the plot is ANSI E size.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o fitplot=true
The pen width value can be set here in case the original HP-GL file does not " -"have it set. The pen width specifies the value in micrometers. The default " -"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " -"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " -"wide.
" -"Note: The penwidth option set here is ignored if the pen widths are " -"set inside the plot file itself..
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o penwidth=... # example: \"2000\" or \"500\"
All options on this page are only applicable if you use TDEPrint to send " -"HP-GL and HP-GL/2 files to one of your printers.
" -"HP-GL and HP-GL/2 are page description languages developed by " -"Hewlett-Packard to drive Pen Plotting devices.
" -"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " -"it on any installed printer.
" -"Note 1: To print HP-GL files, start 'kprinter' and simply load the " -"file into the running kprinter.
" -"Note 2: The 'fitplot' parameter provided on this dialog does also " -"work for printing PDF files (if your CUPS version is more recent than " -"1.1.22).
" -"Additional hint for power users: These TDEPrint GUI elements " -"match with CUPS commandline job option parameters: " -"
-o blackplot=... # examples: \"true\" or \"false\" " -"
-o fitplot=... # examples: \"true\" or \"false\" " -"
-o penwidth=... # examples: \"true\" or \"false\"
Print queue on remote CUPS server
" -"Use this for a print queue installed on a remote machine running a CUPS " -"server. This allows to use remote printers when CUPS browsing is turned off.
" -"Locally-connected printer
" +"Use this for a printer connected to the computer via a parallel, serial or " +"USB port.
" msgstr "" -#: cups/kmcupsuimanager.cpp:94 -msgid "" -"Network IPP printer
" -"Use this for a network-enabled printer using the IPP protocol. Modern " -"high-end printers can use this mode. Use this mode instead of TCP if your " -"printer can do both.
Fax/Modem printer
" -"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " -"backend. Documents sent on this printer will be faxed to the given target fax " -"number.
Shared Windows printer
" +"Use this for a printer installed on a Windows server and shared on the " +"network using the SMB protocol (samba).
" msgstr "" -#: cups/kmcupsuimanager.cpp:108 +#: management/kmwbackend.cpp:130 +msgid "&Remote LPD queue" +msgstr "&Udaljeni LPD red" + +#: management/kmwbackend.cpp:131 msgid "" "Other printer
" -"Use this for any printer type. To use this option, you must know the URI of " -"the printer you want to install. Refer to the CUPS documentation for more " -"information about the printer URI. This option is mainly useful for printer " -"types using 3rd party backends not covered by the other possibilities.
Print queue on a remote LPD server
" +"Use this for a print queue existing on a remote machine running a LPD print " +"server.
" msgstr "" -#: cups/kmcupsuimanager.cpp:116 +#: management/kmwbackend.cpp:137 +msgid "Ne&twork printer (TCP)" +msgstr "Mrežni pisač (TCP)" + +#: management/kmwbackend.cpp:138 msgid "" "Class of printers
" -"Use this to create a class of printers. When sending a document to a class, " -"the document is actually sent to the first available (idle) printer in the " -"class. Refer to the CUPS documentation for more information about class of " -"printers.
Network TCP printer
" +"Use this for a network-enabled printer using TCP (usually on port 9100) as " +"communication protocol. Most network printers can use this mode.
" msgstr "" -#: cups/kmcupsuimanager.cpp:129 -msgid "Re&mote CUPS server (IPP/HTTP)" -msgstr "Udaljeni CUPS poslužitelj (IPP/HTTP)" - -#: cups/kmcupsuimanager.cpp:130 -msgid "Network printer w/&IPP (IPP/HTTP)" -msgstr "Mrežni pisač w/&IPP (IPP/HTTP)" - -#: cups/kmcupsuimanager.cpp:131 -msgid "S&erial Fax/Modem printer" -msgstr "S&erijski Fax/Modem pisač" +#: management/kmwfile.cpp:35 +msgid "File Selection" +msgstr "Odabir datoteka" -#: cups/kmcupsuimanager.cpp:132 -msgid "Other &printer type" -msgstr "Druga vrsta pisača" +#: management/kmwfile.cpp:41 +msgid "" +"The printing will be redirected to a file. Enter here the path of the file " +"you want to use for redirection. Use an absolute path or the browse button for " +"graphical selection.
" +msgstr "" +"Ispis će biti preusmjeren u datoteku. Unesite putanju datoteke u koju " +"želite preusmjeriti ispis. Koristite apslolutnu putanju ili koristite gumb za " +"grafički odabir pomoću dijaloga.
" -#: cups/kmcupsuimanager.cpp:134 -msgid "Cl&ass of printers" -msgstr "K&lasa pisača" +#: management/kmwfile.cpp:44 +msgid "Print to file:" +msgstr "Ispis u datoteku:" -#: cups/kmcupsuimanager.cpp:190 -#, fuzzy -msgid "An error occurred while retrieving the list of available backends:" -msgstr "Došlo je do greške kod čitanja popisa pisača:" +#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 +msgid "Empty file name." +msgstr "Prazno ime datoteke." -#: cups/kmcupsuimanager.cpp:236 -msgid "Priority" -msgstr "Prioritet" +#: management/kmwfile.cpp:66 +msgid "Directory does not exist." +msgstr "Imenik ne postoji." -#: cups/kmcupsuimanager.cpp:238 -msgid "Billing Information" -msgstr "Podaci o trošku" +#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 +msgid "String" +msgstr "String" -#: cups/kmconfigcupsdir.cpp:34 -msgid "Folder" -msgstr "Mapa" +#: management/kxmlcommanddlg.cpp:108 +msgid "Integer" +msgstr "Cijeli broj" -#: cups/kmconfigcupsdir.cpp:35 -msgid "CUPS Folder Settings" -msgstr "CUPS postavke poslužitelja" +#: management/kxmlcommanddlg.cpp:109 +msgid "Float" +msgstr "Razlomak" -#: cups/kmconfigcupsdir.cpp:38 -msgid "Installation Folder" -msgstr "Instalacijski direktorij" +#: management/kxmlcommanddlg.cpp:110 +msgid "List" +msgstr "Popis" -#: cups/kmconfigcupsdir.cpp:41 -msgid "Standard installation (/)" -msgstr "Standardna instalacija (/)" +#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 +msgid "Boolean" +msgstr "Da/Ne" -#: cups/kmwusers.cpp:41 -msgid "Allowed Users" -msgstr "Dozvoljeni korisnici" +#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 +#: management/kxmlcommanddlg.cpp:114 +msgid "&Name:" +msgstr "I&me:" -#: cups/kmwusers.cpp:42 -msgid "Denied Users" -msgstr "Zabranjeni korisnici" +#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 +#: management/kxmlcommanddlg.cpp:866 +msgid "&Description:" +msgstr "&Opis:" -#: cups/kmwusers.cpp:44 -msgid "Define here a group of allowed/denied users for this printer." -msgstr "Ovdje podešavate grupe korisnika koje imaju/nemaju pristup pisaču." +#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 +msgid "&Format:" +msgstr "&Format:" #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "Vrs&ta:" -#: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 -msgid "&Export" -msgstr "&Izvoz" - -#: cups/cupsaddsmb2.cpp:61 -#, fuzzy -msgid "Export Printer Driver to Windows Clients" -msgstr "Izvoz upravljačkog programa pisača na Windows klijente" +#: management/kxmlcommanddlg.cpp:118 +msgid "Default &value:" +msgstr "Uobičajena &vrijednost:" -#: cups/cupsaddsmb2.cpp:72 -msgid "&Username:" -msgstr "&Korisničko ime:" +#: management/kxmlcommanddlg.cpp:119 +msgid "Co&mmand:" +msgstr "&Naredba:" -#: cups/cupsaddsmb2.cpp:73 -msgid "&Samba server:" -msgstr "Samba poslužitelj" +#: management/kxmlcommanddlg.cpp:126 +msgid "&Persistent option" +msgstr "Trajna opcija" -#: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50 -msgid "&Password:" -msgstr "Š&ifra:" +#: management/kxmlcommanddlg.cpp:128 +msgid "Va&lues" +msgstr "&Vrijednosti" -#: cups/cupsaddsmb2.cpp:79 +#: management/kxmlcommanddlg.cpp:136 +msgid "Minimum v&alue:" +msgstr "Minimaln&a vrijednost:" + +#: management/kxmlcommanddlg.cpp:137 +msgid "Ma&ximum value:" +msgstr "Ma&ksimalna vrijednost:" + +#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237 +#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 +#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 +msgid "Name" +msgstr "Ime" + +#: management/kmwend.cpp:53 management/kmwend.cpp:112 +#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 +msgid "Description" +msgstr "Opis" + +#: management/kxmlcommanddlg.cpp:150 +msgid "Add value" +msgstr "Dodaj vrijednost" + +#: management/kxmlcommanddlg.cpp:151 +msgid "Delete value" +msgstr "Obriši vrijednost" + +#: management/kxmlcommanddlg.cpp:153 +msgid "Apply changes" +msgstr "Primijeni izmjene" + +#: management/kxmlcommanddlg.cpp:154 +msgid "Add group" +msgstr "Dodaj grupu" + +#: management/kxmlcommanddlg.cpp:155 +msgid "Add option" +msgstr "Dodaj odrednicu" + +#: management/kxmlcommanddlg.cpp:156 +msgid "Delete item" +msgstr "Obriši stavku" + +#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 +msgid "Move up" +msgstr "Pomakni gore" + +#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 +msgid "Move down" +msgstr "Pomakni dolje" + +#: management/kxmlcommanddlg.cpp:162 +msgid "&Input From" +msgstr "Ulazn&i formular" + +#: management/kxmlcommanddlg.cpp:163 +msgid "O&utput To" +msgstr "&Izlaz u" + +#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 +msgid "File:" +msgstr "Datoteka:" + +#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 +msgid "Pipe:" +msgstr "Preusmjerenje:" + +#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 +msgid "Comment:" +msgstr "Komentar:" + +#: management/kxmlcommanddlg.cpp:285 msgid "" -"Samba server
Adobe Windows PostScript driver files plus the CUPS " -"printer PPD will be exported to the [print$] " -"special share of the Samba server (to change the source CUPS server, use the " -"Samba username
User needs to have write access to the " -"[print$] share on the Samba server. [print$] " -"holds printer drivers prepared for download to Windows clients. This dialog " -"does not work for Samba servers configured with security = share " -"(but works fine with security = user)." +"A description string. This string is shown in the interface, and should be " +"explicit enough about the role of the corresponding option." msgstr "" +"Opis stringa. String je prikazan u sučelju, i morao bi biti dovoljno izričit o " +"funkciji odgovarajućih mogućnosti." -#: cups/cupsaddsmb2.cpp:96 +#: management/kxmlcommanddlg.cpp:293 msgid "" -"Samba password
The Samba setting encrypt passwords = yes " -"(default) requires prior use of smbpasswd -a [username] " -"command, to create an encrypted Samba password and have Samba recognize it." +"The type of the option. This determines how the option is presented graphically " +"to the user." msgstr "" +"Tip opcije. Ovo određuje kako je opcija grafički prezentirana korisniku." -#: cups/cupsaddsmb2.cpp:267 -#, c-format -msgid "Creating folder %1" -msgstr "Stvaram direktorij %1" +#: management/kxmlcommanddlg.cpp:297 +msgid "" +"The format of the option. This determines how the option is formatted for " +"inclusion in the global command line. The tag %value " +"can be used to represent the user selection. This tag will be replaced at " +"run-time by a string representation of the option value." +msgstr "" +"Format opcije. Ovo određuje kako je opcija formatirana za uključivanje u " +"globalnu komandnu liniju. Tag %vrijednost može predstavljati korisnički " +"odabir. Ovaj tag će za vrijeme izvođenja biti zamijenjen sa string vrijednošću " +"opcije." -#: cups/cupsaddsmb2.cpp:275 -#, c-format -msgid "Uploading %1" -msgstr "Učitavam %1" +#: management/kxmlcommanddlg.cpp:303 +msgid "" +"The default value of the option. For non persistent options, nothing is added " +"to the command line if the option has that default value. If this value does " +"not correspond to the actual default value of the underlying utility, make the " +"option persistent to avoid unwanted effects." +msgstr "" +"Uobičajena vrijednost opcije. Za netrajne opcije, ništa nije dodano komandnoj " +"liniji ako opcija ima tu uobičajenu vrijednost.Ako ova vrijednost nije jednaka " +"pravoj uobičajenoj vrijednosti podređenog alata, napravite opciju trajno da " +"izbjegnete neželjene efekte." -#: cups/cupsaddsmb2.cpp:283 -#, c-format -msgid "Installing driver for %1" -msgstr "Postavljam upravljački program za %1" +#: management/kxmlcommanddlg.cpp:309 +msgid "" +"Make the option persistent. A persistent option is always written to the " +"command line, whatever its value. This is useful when the chosen default value " +"does not match with the actual default value of the underlying utility." +msgstr "" +"Učini opciju trajnom. Trajna opcija je uvijek zapisana u naredbenoj liniji, bez " +"obzira na vrijednost. Ovo je korisno kada odabrana uobičajenavrijednost nije " +"jednaka pravoj uobičajenoj vrijednosti u podređenom alatu." -#: cups/cupsaddsmb2.cpp:291 +#: management/kxmlcommanddlg.cpp:313 #, c-format -msgid "Installing printer %1" -msgstr "Postavljam pisač %1" - -#: cups/cupsaddsmb2.cpp:333 -msgid "Driver successfully exported." -msgstr "Upravljački program uspješno izvezen." +msgid "" +"The full command line to execute the associated underlying utility. This " +"command line is based on a mechanism of tags that are replaced at run-time. The " +"supported tags are:" +"%1
" -msgstr "%1
" +#: management/kxmlcommanddlg.cpp:331 +msgid "" +"Input specification when the underlying utility reads input data from its " +"standard input." +msgstr "" +"Spacifikacija unosa kad alat za podršku čita ulazne podatke sa svojeg " +"standardnog ulaza." -#: cups/cupsaddsmb2.cpp:373 +#: management/kxmlcommanddlg.cpp:335 msgid "" -"You are about to prepare the %1 driver to be shared out to Windows " -"clients through Samba. This operation requires the " -"Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " -"service on the target server. Click Export to start the operation. Read " -"the cupsaddsmb manual page in Konqueror or type " -"man cupsaddsmb in a console window to learn more about this " -"functionality." +"Output specification when the underlying utility writes output data to its " +"standard output." msgstr "" +"Specifikacija ispisa kada alat za podršku ispisuje podatke na svoj standardni " +"izlaz." -#: cups/cupsaddsmb2.cpp:393 +#: management/kxmlcommanddlg.cpp:339 msgid "" -"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " -"CUPS version 1.1.11 or higher)." +"A comment about the underlying utility, which can be viewed by the user from " +"the interface. This comment string supports basic HTML tags like <a>, " +"<b> or <i>." msgstr "" +"Objašnjenje o donjim alatima, koji korisnik može vidjeti u sučelju. Ovo " +"objašnjenje podržaba osnovne HTML tagove kao <a>, <b> ili " +"<i>." -#: cups/cupsaddsmb2.cpp:404 -#, c-format -msgid "Preparing to upload driver to host %1" -msgstr "Priprema slanja upravljačkog programa na računalu %1" +#: management/kxmlcommanddlg.cpp:568 +msgid "" +"Invalid identification name. Empty strings and \"__root__\" are not allowed." +msgstr "Nepravilno ime. Prazna imena i \"__root__\" nisu dozvoljeni." -#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 -msgid "&Abort" -msgstr "&Prekini" +#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 +msgid "New Group" +msgstr "Nova grupa" -#: cups/cupsaddsmb2.cpp:415 -msgid "The driver for printer %1 could not be found." -msgstr "Ne mogu naći upravljački program za pisač %1." +#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 +msgid "New Option" +msgstr "Nova odrednica" -#: cups/cupsaddsmb2.cpp:455 +#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 #, c-format -msgid "Preparing to install driver on host %1" -msgstr "Priprema instalacije upravljačkog programa na računalu %1" +msgid "Command Edit for %1" +msgstr "Uređivanje naredbe za %1" -#: cups/kmwquota.cpp:46 -msgid "second(s)" -msgstr "sekunda(i)" +#: management/kxmlcommanddlg.cpp:833 +msgid "&Mime Type Settings" +msgstr "Postavke &Mime tipova" -#: cups/kmwquota.cpp:47 -msgid "minute(s)" -msgstr "minuta(i)" - -#: cups/kmwquota.cpp:48 -msgid "hour(s)" -msgstr "sat(i)" - -#: cups/kmwquota.cpp:49 -msgid "day(s)" -msgstr "dan(a)" +#: management/kxmlcommanddlg.cpp:839 +msgid "Supported &Input Formats" +msgstr "Podržani ulazn&i formati" -#: cups/kmwquota.cpp:50 -msgid "week(s)" -msgstr "tjedan(a)" +#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 +msgid "Requirements" +msgstr "Zahtjevi" -#: cups/kmwquota.cpp:51 -msgid "month(s)" -msgstr "mjesec(i)" +#: management/kxmlcommanddlg.cpp:851 +msgid "&Edit Command..." +msgstr "Uređivanj&e naredbe..." -#: cups/kmwquota.cpp:79 -msgid "Printer Quota Settings" -msgstr "Postavke organičenja pisača" +#: management/kxmlcommanddlg.cpp:868 +msgid "Output &format:" +msgstr "Izlazni &format:" -#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 -msgid "No quota" -msgstr "Bez ograničenja" +#: management/kxmlcommanddlg.cpp:870 +msgid "ID name:" +msgstr "ID ime:" -#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 -#: cups/kmwquota.cpp:90 -msgid "None" -msgstr "Nijedna" +#: management/kxmlcommanddlg.cpp:1033 +msgid "exec:/" +msgstr "izvrši:/" -#: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 -msgid "&Period:" -msgstr "&Period:" +#: management/kmdriverdbwidget.cpp:51 +msgid "&PostScript printer" +msgstr "&PostScript pisač" -#: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 -msgid "&Size limit (KB):" -msgstr "&Granica veličine (KB):" +#: management/kmdriverdbwidget.cpp:52 +msgid "&Raw printer (no driver needed)" +msgstr "&Obični pisač (upravljački program nije potreban)" -#: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 -msgid "&Page limit:" -msgstr "G&ranica stranica:" +#: management/kmdriverdbwidget.cpp:55 +msgid "&Other..." +msgstr "&Ostalo..." -#: cups/kmwquota.cpp:104 -msgid "" -"Set here the quota for this printer. Using limits of 0 "
-"means that no quota will be used. This is equivalent to set quota period to "
-"
Print Job Billing and Accounting
" -"Insert a meaningful string here to associate the current print job with a " -"certain account. This string will appear in the CUPS \"page_log\" to help with " -"the print accounting in your organization. (Leave it empty if you do not need " -"it.) " -"
It is useful for people who print on behalf of different \"customers\", " -"like print service bureaux, letter shops, press and prepress companies, or " -"secretaries who serve different bosses, etc.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-billing=... # example: \"Marketing_Department\" or " -"\"Joe_Doe\"
Welcome,
" +"This wizard will help to install a new printer on your computer. It will " +"guide you through the various steps of the process of installing and " +"configuring a printer for your printing system. At each step, you can always go " +"back using the Back button.
" +"We hope you enjoy this tool!
" +"Scheduled Printing
" -"Scheduled printing lets you control the time of the actual printout, while " -"you can still send away your job now and have it out of your way. " -"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " -"you to park your job until a time when you (or a printer administrator) decides " -"to manually release it. " -"
This is often required in enterprise environments, where you normally are " -"not allowed to directly and immediately access the huge production printers in " -"your Central Repro Department. However it is okay to send jobs to the " -"queue which is under the control of the operators (who, after all, need to make " -"sure that the 10,000 sheets of pink paper which is required by the Marketing " -"Department for a particular job are available and loaded into the paper " -"trays).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " -"
Page Labels
" -"Page Labels are printed by CUPS at the top and bottom of each page. They " -"appear on the pages surrounded by a little frame box. " -"
They contain any string you type into the line edit field.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-label=\"...\" # example: \"Company Confidential\"" -"
Job Priority
" -"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " -"First In, First Out. " -"
The job priority option allows you to re-order the queue according to your " -"needs. " -"
It works in both directions: you can increase as well as decrease " -"priorities. (Usually you can only control your own jobs). " -"
Since the default job priority is \"50\", any job sent with, for example, " -"\"49\" will be printed only after all those others have finished. Conversely, a " -"\"51\" or higher priority job will go right to the top of a populated queue (if " -"no other, higher prioritized one is present).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" -"
Select a valid detected port, or enter directly the corresponding URI in the " +"bottom edit field.
" +msgstr "" +"Odaberite ispravno prepoznat port ili unesite direktno odgovarajući URL u " +"donje polje.
" -#: cups/kpschedulepage.cpp:145 -msgid "Specified Time" -msgstr "Navedeno vrijeme" +#: management/kmwlocal.cpp:78 +msgid "" +"_: The URI is empty\n" +"Empty URI." +msgstr "" -#: cups/kpschedulepage.cpp:160 -#, fuzzy -msgid "&Scheduled printing:" -msgstr "Ra&spored ispisa:" +#: management/kmwlocal.cpp:83 +msgid "The local URI doesn't correspond to a detected port. Continue?" +msgstr "Lokalni URL ne odgovara nađenom portu. Nastaviti?" -#: cups/kpschedulepage.cpp:163 -msgid "&Billing information:" -msgstr "&Podaci o trošku:" +#: management/kmwlocal.cpp:85 +msgid "Select a valid port." +msgstr "Izaberite valjani port." -#: cups/kpschedulepage.cpp:166 -msgid "T&op/Bottom page label:" -msgstr "&Oznaka vrha/dna stranice:" +#: management/kmwlocal.cpp:166 +msgid "Unable to detect local ports." +msgstr "Nije moguće otrkivati lokalne portove." -#: cups/kpschedulepage.cpp:169 -msgid "&Job priority:" -msgstr "Važnost pos&la:" +#: management/kmconfigcommand.cpp:33 +msgid "Commands" +msgstr "Naredbe" -#: cups/kpschedulepage.cpp:200 -msgid "The time specified is not valid." -msgstr "Navedeno vrijeme nije ispravno." +#: management/kmconfigcommand.cpp:34 +msgid "Command Settings" +msgstr "Postavke naredbi" -#: cups/kmpropquota.cpp:57 -msgid "Quotas" -msgstr "Ograničenje količine" +#: management/kmconfigcommand.cpp:37 +msgid "Edit/Create Commands" +msgstr "Izmjena/izrada naredbi" -#: cups/kmpropquota.cpp:58 -msgid "Quota Settings" -msgstr "Postavke ograničenja" +#: management/kmconfigcommand.cpp:39 +msgid "" +"Command objects perform a conversion from input to output."
+"
They are used as the basis to build both print filters and special "
+"printers. They are described by a command string, a set of options, a set of "
+"requirements and associated mime types. Here you can create new command objects "
+"and edit existing ones. All changes will only be effective for you."
+msgstr ""
-#: cups/ippreportdlg.cpp:34
-msgid "IPP Report"
-msgstr "IPP izvješće"
+#: management/kmwclass.cpp:37
+msgid "Class Composition"
+msgstr "Sastav klase"
-#: cups/ippreportdlg.cpp:93
-msgid "Internal error: unable to generate HTML report."
-msgstr "Interna pogreška: Nije moguće generirati HTML izvještaj."
+#: management/kmwclass.cpp:52
+msgid "Available printers:"
+msgstr "Dostupni pisači:"
-#: cups/kmcupsmanager.cpp:819
-msgid "Library cupsdconf not found. Check your installation."
-msgstr "Biblioteka cupsdconf nije pronađena. Provjerite vašu instalaciju."
+#: management/kmwclass.cpp:53
+msgid "Class printers:"
+msgstr "Pisači klase:"
-#: cups/kmcupsmanager.cpp:825
-msgid "Symbol %1 not found in cupsdconf library."
-msgstr "Simbol %1 nije pronađen u cupsdconf biblioteci."
+#: management/kmwclass.cpp:79
+msgid "You must select at least one printer."
+msgstr "Morate navesti barem jedan pisač!"
-#: cups/kmcupsmanager.cpp:920
-msgid "&Export Driver..."
-msgstr "&Izvoz upravljačkog programa..."
+#: management/kmconfigfilter.cpp:40
+msgid "Filter"
+msgstr "Filter"
-#: cups/kmcupsmanager.cpp:922
-#, fuzzy
-msgid "&Printer IPP Report"
-msgstr "&IPP izvješće pisača..."
+#: management/kmconfigfilter.cpp:41
+msgid "Printer Filtering Settings"
+msgstr "Postavke filtera za pisač"
-#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218
-#, c-format
-msgid "IPP Report for %1"
-msgstr "IPP izvještaj za %1"
+#: management/kmconfigfilter.cpp:44
+msgid "Printer Filter"
+msgstr "Filter pisača"
-#: cups/kmcupsmanager.cpp:972
-msgid "Unable to retrieve printer information. Error received:"
-msgstr "Nije moguće dohvatiti podatke o pisaču. Primljena pogreška:"
+#: management/kmconfigfilter.cpp:56
+msgid ""
+"The printer filtering allows you to view only a specific set of printers "
+"instead of all of them. This may be useful when there are a lot of printers "
+"available but you only use a few ones. Select the printers you want to see from "
+"the list on the left or enter a Location filter (ex: Group_1*). Both are "
+"cumulative and ignored if empty."
+msgstr ""
+"Filter pisača omogućava prikazivanje samo jedan dio pisača umjesto svih "
+"odjednom. Ovo može biti vrlo korisno ako postoji mnogo pisača, a vi koristite "
+"samo nekolicinu. Odaberite pisače koje želite vidjeti sa popisa lijevo ili "
+"unesite Lokaciju filtera (npr:Grupa_1*). Obje su kumulativne i "
+"zanemaruju se ako su prazne."
-#: cups/kmcupsmanager.cpp:985
-#, fuzzy
-msgid "Server"
-msgstr "Poslužitelj:"
+#: management/kmconfigfilter.cpp:62
+msgid "Location filter:"
+msgstr "Lokacija filtra:"
-#: cups/kmcupsmanager.cpp:1025
-#, c-format
+#: management/kmmainview.cpp:72
msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %1."
+"The printer %1 already exists. Continuing will overwrite existing printer. Do "
+"you want to continue?"
msgstr ""
-"Povezivanje s CUPS poslužiteljem nije uspjelo. Provjerite da li je CUPS "
-"poslužitelj ispravno postavljen i pokrenut. Error: %1."
+"Pisač %1 već postoji. Nastavak će prepisati sadašnji pisač. Želite li "
+"nastaviti?"
-#: cups/kmcupsmanager.cpp:1026
-msgid "the IPP request failed for an unknown reason"
-msgstr "IPP zahtjev nije uspio iz nepoznatog razloga."
+#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
+#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
+msgid "Initializing manager..."
+msgstr "Pokretanje upravitelja..."
-#: cups/kmcupsmanager.cpp:1060
-msgid "connection refused"
-msgstr "Odbijeno spajanje na poslužitelj."
+#: management/kmmainview.cpp:180
+msgid "&Icons,&List,&Tree"
+msgstr "&Ikone,&Popis,&Stablo"
-#: cups/kmcupsmanager.cpp:1063
-msgid "host not found"
-msgstr "Pisač nije nađen."
+#: management/kmmainview.cpp:184
+msgid "Start/Stop Printer"
+msgstr "Pokreni/zaustavi pisač"
-#: cups/kmcupsmanager.cpp:1067
-msgid "read failed (%1)"
-msgstr ""
+#: management/kmmainview.cpp:186
+msgid "&Start Printer"
+msgstr "&Pokreni pisač"
-#: cups/kmcupsmanager.cpp:1071
-#, fuzzy
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %2: %1."
-msgstr ""
-"Povezivanje s CUPS poslužiteljem nije uspjelo. Provjerite da li je CUPS "
-"poslužitelj ispravno postavljen i pokrenut. Error: %1."
+#: management/kmmainview.cpp:187
+msgid "Sto&p Printer"
+msgstr "&Zaustavi pisač"
-#: cups/ipprequest.cpp:164
-msgid "You don't have access to the requested resource."
-msgstr "Nemate pristup traženom resursu."
+#: management/kmmainview.cpp:189
+msgid "Enable/Disable Job Spooling"
+msgstr "Omogući/onemogući spremanje poslova"
-#: cups/ipprequest.cpp:167
-msgid "You are not authorized to access the requested resource."
-msgstr "Niste autorizirani da pristupite zatraženom resursu."
+#: management/kmmainview.cpp:191
+msgid "&Enable Job Spooling"
+msgstr "&Omogući spremanje poslova"
-#: cups/ipprequest.cpp:170
-msgid "The requested operation cannot be completed."
-msgstr "Tražena operacija ne može biti završena."
+#: management/kmmainview.cpp:192
+msgid "&Disable Job Spooling"
+msgstr "O&nemogući spremanje poslova"
-#: cups/ipprequest.cpp:173
-msgid "The requested service is currently unavailable."
-msgstr "Traženi servis trenutno nije dostupan."
+#: management/kmmainview.cpp:195
+msgid "&Configure..."
+msgstr "&Postava..."
-#: cups/ipprequest.cpp:176
-msgid "The target printer is not accepting print jobs."
-msgstr "Odredišni tiskač ne prihvaća poslove tiskanja."
+#: management/kmmainview.cpp:196
+msgid "Add &Printer/Class..."
+msgstr "Dodaj &pisač/klasu..."
-#: cups/ipprequest.cpp:313
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running."
-msgstr ""
-"Spajanje na CUPS poslužitelja nije uspjelo. Provjerite je li CUPS poslužitelj "
-"ispravno instaliran i pokrenut."
+#: management/kmmainview.cpp:197
+msgid "Add &Special (pseudo) Printer..."
+msgstr "Dodaj po&sebni (pseudo) pisač..."
-#: cups/ipprequest.cpp:316
-msgid "The IPP request failed for an unknown reason."
-msgstr "IPP zahtjev nije uspio iz napoznatog razloga."
+#: management/kmmainview.cpp:198
+msgid "Set as &Local Default"
+msgstr "Podesi kao uobičajeno &lokalno"
-#: cups/ipprequest.cpp:461
-msgid "Attribute"
-msgstr "Atributi"
+#: management/kmmainview.cpp:199
+msgid "Set as &User Default"
+msgstr "Podesi kao &uobičajeno za korisnika"
-#: cups/ipprequest.cpp:462
-msgid "Values"
-msgstr "Vrijednosti"
+#: management/kmmainview.cpp:200
+msgid "&Test Printer..."
+msgstr "&Proba pisača..."
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "True"
-msgstr "Točno"
+#: management/kmmainview.cpp:201
+msgid "Configure &Manager..."
+msgstr "Po&dešavanje upravitelja..."
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "False"
-msgstr "Netočno"
+#: management/kmmainview.cpp:202
+msgid "Initialize Manager/&View"
+msgstr "Pokreni Upravitelj/&Pogled"
-#: cups/kmwippprinter.cpp:45
-msgid "IPP Printer Information"
-msgstr "IPP informacije o pisaču"
+#: management/kmmainview.cpp:204
+msgid "&Orientation"
+msgstr "&Usmjerenje"
-#: cups/kmwippprinter.cpp:55
-msgid "&Printer URI:"
-msgstr "URI &pisača:"
+#: management/kmmainview.cpp:207
+msgid "&Vertical,&Horizontal"
+msgstr "Uspra&vno, V&odoravno"
-#: cups/kmwippprinter.cpp:64
-msgid ""
-"
Either enter the printer URI directly, or use the network scanning " -"facility.
" -msgstr "Unesite URL pisača ili koristite uslugu pregledavanja mreže.
" +#: management/kmmainview.cpp:211 +msgid "R&estart Server" +msgstr "Ponovno pok&reni poslužitelj" -#: cups/kmwippprinter.cpp:65 +#: management/kmmainview.cpp:212 +msgid "Configure &Server..." +msgstr "Podešavanje po&služitelja..." + +#: management/kmmainview.cpp:213 #, fuzzy -msgid "&IPP Report" -msgstr "IPP izvješće" +msgid "Configure Server Access..." +msgstr "Podešavanje po&služitelja..." -#: cups/kmwippprinter.cpp:112 -msgid "You must enter a printer URI." -msgstr "Morate upisati uri pisača!" +#: management/kmmainview.cpp:216 +#, fuzzy +msgid "Hide &Toolbar" +msgstr "Prikaz &trake s alatima" -#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 -msgid "No printer found at this address/port." -msgstr "Nije pronađen pisač na toj adresi/portu" +#: management/kmmainview.cpp:218 +#, fuzzy +msgid "Show Me&nu Toolbar" +msgstr "Prikaz &trake s alatima" -#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 -msgid "" -"_: Unknown host - 1 is the IP\n" -"Enter the URI corresponding to the printer to be installed. Examples:
" -"%1
" +msgstr "Primljena greška od upravitelja:%1
" + +#: management/kmmainview.cpp:649 +msgid "Internal error (no error message)." +msgstr "Interna greška: (nema poruke o grešci)." + +#: management/kmmainview.cpp:667 +msgid "Unable to restart print server." +msgstr "Nije moguće ponovo pokrenuti poslužitelj pisača." + +#: management/kmmainview.cpp:672 +msgid "Restarting server..." +msgstr "Ponovno pokrenćem poslužitelj..." + +#: management/kmmainview.cpp:682 +msgid "Unable to configure print server." +msgstr "Nije moguće konfigurirati poslužitelj pisača." + +#: management/kmmainview.cpp:687 +msgid "Configuring server..." +msgstr "Podešavam poslužitelj..." + +#: management/kmmainview.cpp:842 msgid "" -"Brightness: Slider to control the brightness value of all colors " -"used.
" -"The brightness value can range from 0 to 200. Values greater than 100 will " -"lighten the print. Values less than 100 will darken the print.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o brightness=... # use range from \"0\" to \"200\"" -"
Hue (Tint): Slider to control the hue value for color rotation.
" -"The hue value is a number from -360 to 360 and represents the color hue " -"rotation. The following table summarizes the change you will see for the base " -"colors: " -"
Original | " -"hue=-45 | " -"hue=45 |
---|---|---|
Red | " -"Purple | " -"Yellow-orange |
Green | " -"Yellow-green | " -"Blue-green |
Yellow | " -"Orange | " -"Green-yellow |
Blue | " -"Sky-blue | " -"Purple |
Magenta | " -"Indigo | " -"Crimson |
Cyan | " -"Blue-green | " -"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " -"used.
" -"The saturation value adjusts the saturation of the colors in an image, " -"similar to the color knob on your television. The color saturation value.can " -"range from 0 to 200. On inkjet printers, a higher saturation value uses more " -"ink. On laserjet printers, a higher saturation uses more toner. A color " -"saturation of 0 produces a black-and-white print, while a value of 200 will " -"make the colors extremely intense.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o saturation=... # use range from \"0\" to \"200\"" -"
Gamma: Slider to control the gamma value for color correction.
" -"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " -"lightens the print. A gamma value less than 1000 darken the print. The default " -"gamma is 1000.
" -"Note:
the gamma value adjustment is not visible in the thumbnail " -"preview. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o gamma=... # use range from \"1\" to \"3000\"" -"
Image Printing Options
" -"All options controlled on this page only apply to printing images. Most " -"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " -"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " -"output of image printouts are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Coloration Preview Thumbnail
" -"The coloration preview thumbnail indicates change of image coloration by " -"different settings. Options to influence output are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Image Size: Dropdown menu to control the image size on the printed " -"paper. Dropdown works in conjunction with slider below. Dropdown options " -"are:.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o natural-scaling=... # range in % is 1....800 " -"" -"
-o scaling=... # range in % is 1....800 " -"
-o ppi=... # range in ppi is 1...1200
Position Preview Thumbnail
" -"This position preview thumbnail indicates the position of the image on the " -"paper sheet. " -"
Click on horizontal and vertical radio buttons to move image alignment on " -"paper around. Options are: " -"
Reset to Default Values
" -"Reset all coloration settings to default values. Default values are: " -"
Image Positioning:
" -"Select a pair of radiobuttons to move image to the position you want on the " -"paper printout. Default is 'center'.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o position=... # examples: \"top-left\" or \"bottom\"" -"
Enter the information concerning the remote IPP server owning the targeted " -"printer. This wizard will poll the server before continuing.
" -msgstr "" -"Unesite podatke o udaljenom IPP poslužitelju koji posjeduje ciljni pisač. " -"Ovaj čarobnjak će sakupiti poslužitelj prije nastavka.
" +#: management/kminstancepage.cpp:268 +#, c-format +msgid "Unable to send test page to %1." +msgstr "Nije moguće poslati probnu stranicu na %1." -#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 -#: rlpr/kmwrlpr.cpp:62 -msgid "Host:" -msgstr "Računalo:" +#: management/kmpropcontainer.cpp:35 +msgid "Change..." +msgstr "Promijeni..." -#: cups/kmwipp.cpp:43 -msgid "Port:" -msgstr "Port:" +#: management/kmpropbackend.cpp:34 +msgid "Printer type:" +msgstr "Vrsta pisača:" -#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 -msgid "Empty server name." -msgstr "Prazno ime poslužitelja." +#: management/kmpropbackend.cpp:48 +msgid "Interface" +msgstr "Sučelje" -#: cups/kmwipp.cpp:59 -msgid "Incorrect port number." -msgstr "Neispravni broj porta." +#: management/kmpropbackend.cpp:49 +msgid "Interface Settings" +msgstr "Postavke sučelja" -#: cups/kmwipp.cpp:72 -msgid "Additional Tags
You may send additional commands to the CUPS " -"server via this editable list. There are 3 purposes for this: " -"Standard CUPS job options: A complete list of standard CUPS job " -"options is in the CUPS User Manual" -". Mappings of the kprinter user interface widgets to respective CUPS job " -"option names are named in the various WhatsThis help items..
" -"Custom CUPS job options: CUPS print servers may be customized with " -"additional print filters and backends which understand custom job options. You " -"can specify such custom job options here. If in doubt, ask your system " -"administrator..
" -"" -"
Operator Messages: You may send additional messages to the " -"operator(s) of your production printers (e.g. in your " -"Central Repro Department
) Messages can be read by the operator(s) (or " -"yourself) by viewing the \"Job IPP Report\" for the job. " -"Examples:" -"A standard CUPS job option:" -"" -"
(Name) number-up -- (Value) 9 " -"
" -"
A job option for custom CUPS filters or backends:" -"
(Name) DANKA_watermark -- " -"(Value) Company_Confidential " -"
" -"
A message to the operator(s):" -"
(Name) Deliver_after_completion -- " -"(Value) to_Marketing_Departm." -"
Note: the fields must not include spaces, tabs or quotes. You may " -"need to double-click on a field to edit it. " -"
Warning: Do not use such standard CUPS option names which also can be " -"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " -" or if they are sent multiple times. For all options supported by the GUI, " -"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " -"option name.)
Enter the information concerning your printer or class. Name " +"is mandatory, Location and Description " +"are not (they may even not be used on some systems).
" +msgstr "" -#: cups/kmwbanners.cpp:62 -msgid "Top Secret" -msgstr "Stroga tajna" +#: management/kmwname.cpp:39 +msgid "Name:" +msgstr "Ime:" -#: cups/kmwbanners.cpp:63 -msgid "Unclassified" -msgstr "Neklasificirano" +#: kprintdialog.cpp:284 management/kmwname.cpp:40 +msgid "Location:" +msgstr "Lokacija:" -#: cups/kmwbanners.cpp:86 -msgid "Banner Selection" -msgstr "Izbor naslova" +#: management/kmwname.cpp:48 +msgid "You must supply at least a name." +msgstr "Morate upisati barem ime!" -#: cups/kmwbanners.cpp:99 +#: management/kmwname.cpp:56 msgid "" -"Select the default banners associated with this printer. These banners will " -"be inserted before and/or after each print job sent to the printer. If you " -"don't want to use banners, select No Banner.
" +"It is usually not a good idea to include spaces in printer name: it may prevent " +"your printer from working correctly. The wizard can strip all spaces from the " +"string you entered, resulting in %1; what do you want to do?" msgstr "" -"Odaberite uobičajene naslove vezane uz ovaj pisač. Ti naslovi bit će " -"umetnuti prije i/ili nakon svakog ispisa poslanog na pisač. Ako ne želite " -"koristiti naslove, odaberite nijedan.
" - -#: cups/kmwfax.cpp:39 -msgid "Fax Serial Device" -msgstr "Fax serijski uređaj" +"Obično nije dobro upisati ime pisača koje sadrži razmake. To može praviti " +"probleme u radu pisača. Čarobnjak može sam maknuti sve razmake iz imena koje " +"ste upisali, pa će ono izgledati ovako: %1. Što želite?" -#: cups/kmwfax.cpp:43 -msgid "Select the device which your serial Fax/Modem is connected to.
" -msgstr "Odaberite gdje je spojen vaš serijski Fax/Modem.
" +#: management/kmwname.cpp:62 +msgid "Strip" +msgstr "Makni" -#: cups/kmwfax.cpp:81 -msgid "You must select a device." -msgstr "Morate navesti uređaj." +#: kprinterimpl.cpp:510 management/kmwname.cpp:62 +msgid "Keep" +msgstr "Zadrži" -#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 +#: management/kmdriverdialog.cpp:48 msgid "" -"No valid print executable was found in your path. Check your installation." +"Some options are in conflict. You must resolve those conflicts before " +"continuing." msgstr "" -"U vašoj putanji nije nađena valjana izvršna datoteka. Provjerite instalaciju." +"Neke od postavki su proturječne. Morate riješiti te sukobe prije nastavka. " -#: foomatic/kmfoomaticmanager.cpp:70 -msgid "This is not a Foomatic printer" -msgstr "Ovo nije Superautomatik pisač" +#: management/kmpropwidget.cpp:50 +msgid "" +"%1
Top Margin
. " -"This spinbox/text edit field lets you control the top margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror..
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Bottom Margin
. " -"This spinbox/text edit field lets you control the bottom margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Left Margin
. " -"This spinbox/text edit field lets you control the left margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-left=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Right Margin
. " -"This spinbox/text edit field lets you control the right margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-right=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
The command will use an output file. If checked, make sure the command " +"contains an output tag.
" msgstr "" +"Naredba će koristiti izlaznu datoteku. Ako tako odaberete, budite sigurni da " +"naredba sadrži tag za izlaz.
" -#: marginwidget.cpp:114 +#: management/kmspecialprinterdlg.cpp:108 +#, c-format msgid "" -"Change Measurement Unit
. " -"You can change the units of measurement for the page margins here. Select " -"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
The command to execute when printing on this special printer. Either enter " +"the command to execute directly, or associate/create a command object with/for " +"this special printer. The command object is the preferred method as it provides " +"support for advanced settings like mime type checking, configurable options and " +"requirement list (the plain command is only provided for backward " +"compatibility). When using a plain command, the following tags are " +"recognized:
" +"Custom Margins Checkbox
. " -"Enable this checkbox if you want to modify the margins of your printouts " -"
You can change margin settings in 4 ways: " -"
The default mimetype for the output file (e.g. application/postscript).
" msgstr "" -#: marginwidget.cpp:138 -msgid "" -"\"Drag-your-Margins\"
. " -"Use your mouse to drag and set each margin on this little preview window. " -"
The default extension for the output file (e.g. ps, pdf, ps.gz).
" msgstr "" +"Uobičajen nastavak imena izlazne datoteke (npr. ps, pdf, ps.gz).
" -#: marginwidget.cpp:148 -msgid "&Use custom margins" -msgstr "&Koristi prilagođene margine" +#: management/kmspecialprinterdlg.cpp:170 +msgid "You must provide a non-empty name." +msgstr "Morate navesti ulaznu datoteku." -#: marginwidget.cpp:158 -msgid "&Top:" -msgstr "&Vrh:" +#: management/kmspecialprinterdlg.cpp:178 +#, c-format +msgid "Invalid settings. %1." +msgstr "Neispravne postavke, %1." -#: marginwidget.cpp:159 -msgid "&Bottom:" -msgstr "D&no:" +#: management/kmspecialprinterdlg.cpp:197 +#, c-format +msgid "Configuring %1" +msgstr "Podešavanje %1" -#: marginwidget.cpp:160 -msgid "Le&ft:" -msgstr "&Lijevo:" +#: management/kmwdriverselect.cpp:37 +msgid "Driver Selection" +msgstr "Odabir upravljačkog programa" -#: marginwidget.cpp:161 -msgid "&Right:" -msgstr "&Desno:" +#: management/kmwdriverselect.cpp:43 +msgid "" +"Several drivers have been detected for this model. Select the driver you " +"want to use. You will have the opportunity to test it as well as to change it " +"if necessary.
" +msgstr "" +"Za ovaj model je nađeno nekoliko upravljačkih programa. Odaberite " +"upravljački program koji želite koristiti. Imat ćete priliku isprobati ga i po " +"potrebi izmijeniti.
" -#: marginwidget.cpp:164 -msgid "Pixels (1/72nd in)" -msgstr "Pikseli (1/72nd in)" +#: management/kmwdriverselect.cpp:46 +msgid "Driver Information" +msgstr "Informacije o upravljačkom programu" -#: marginwidget.cpp:167 -msgid "Inches (in)" -msgstr "Inča (in)" +#: management/kmwdriverselect.cpp:62 +msgid "You must select a driver." +msgstr "Morate navesti upravljački program!" -#: marginwidget.cpp:168 -msgid "Centimeters (cm)" -msgstr "Centimetara (cm)" +#: management/kmwdriverselect.cpp:82 +msgid " [recommended]" +msgstr " [preporučeno]" -#: marginwidget.cpp:169 -msgid "Millimeters (mm)" -msgstr "Milimetara (mm)" +#: management/kmwdriverselect.cpp:113 +msgid "No information about the selected driver." +msgstr "Nemam podataka o odabarnom goniču." -#: kprinterimpl.cpp:156 -msgid "Cannot copy multiple files into one file." -msgstr "Ne mogu kopirati više datoteka u jednu." +#: management/kmwend.cpp:33 +msgid "Confirmation" +msgstr "Potvrda" -#: kprinterimpl.cpp:165 -msgid "Cannot save print file to %1. Check that you have write access to it." -msgstr "" -"Ne mogu snimiti ispis u datoteku %1. Provjerite imate li pravo pristupa." +#: management/kmwend.cpp:50 management/kmwend.cpp:106 +#: management/kmwend.cpp:109 tdefilelist.cpp:102 +msgid "Type" +msgstr "Vrsta" -#: kprinterimpl.cpp:233 -#, c-format -msgid "Printing document: %1" -msgstr "Ispis dokumenta: %1" +#: management/kmwend.cpp:52 +msgid "Location" +msgstr "Lokacija" -#: kprinterimpl.cpp:251 -#, c-format -msgid "Sending print data to printer: %1" -msgstr "Šaljem podatke za ispis na pisač: %1" +#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 +msgid "Members" +msgstr "Članovi" -#: kprinterimpl.cpp:279 -msgid "Unable to start child print process. " -msgstr "Nije moguće pokrenuti podređeni proces ispisa." +#: management/kmwend.cpp:69 +msgid "Backend" +msgstr "Backend" -#: kprinterimpl.cpp:281 -msgid "" -"The TDE print server (tdeprintd) could not be contacted. Check that this " -"server is running." -msgstr "" -"Ne mogu stupiti u vezu s TDE poslužiteljem ispisa (tdeprintd" -"). Provjerite je li pokrenut." +#: management/kmwend.cpp:74 +msgid "Device" +msgstr "Uređaj" -#: kprinterimpl.cpp:283 -msgid "" -"_: 1 is the command thatUnable to perform the requested page selection. The filter psselect " -"cannot be inserted in the current filter chain. See Filter " -"tab in the printer properties dialog for further information.
" -msgstr "" +#: management/kmwend.cpp:81 management/kmwend.cpp:88 +msgid "Host" +msgstr "Računalo" -#: kprinterimpl.cpp:355 -msgid "Could not load filter description for %1.
" -msgstr "Nemoguće učitati opis filtera za %1.
" +#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 +msgid "Queue" +msgstr "Red" -#: kprinterimpl.cpp:371 -msgid "" -"Error while reading filter description for %1" -". Empty command line received.
" -msgstr "" -"Greška kod čitanja opisa filtera za %1. Primljen prazninaredbeni " -"redak.
" +#: management/kmwend.cpp:91 +msgid "Account" +msgstr "Račun" -#: kprinterimpl.cpp:385 -msgid "" -"The MIME type %1 is not supported as input of the filter chain (this may happen " -"with non-CUPS spoolers when performing page selection on a non-PostScript " -"file). Do you want TDE to convert the file to a supported format?" -msgstr "" +#: management/kmwend.cpp:96 +msgid "URI" +msgstr "URL" -#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 -msgid "Convert" -msgstr "Pretvori" +#: management/kmwend.cpp:109 +msgid "DB driver" +msgstr "DB upravljački program" -#: kprinterimpl.cpp:399 -msgid "Select MIME Type" -msgstr "Odaberite MIME tip" +#: management/kmwend.cpp:109 +msgid "External driver" +msgstr "Vanjski upravljački program" -#: kprinterimpl.cpp:400 -msgid "Select the target format for the conversion:" -msgstr "Odaberite ciljni oblik za pretvorbu:" +#: management/kmwend.cpp:110 +msgid "Manufacturer" +msgstr "Proizvođač" -#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 -msgid "Operation aborted." -msgstr "Postupak je prekinut." +#: management/kmwend.cpp:111 +msgid "Model" +msgstr "Model" -#: kprinterimpl.cpp:410 -msgid "No appropriate filter found. Select another target format." -msgstr "Nije nađen prikladan filter. Odaberite drugi ciljni oblik." +#: management/kmwlpd.cpp:41 +msgid "LPD Queue Information" +msgstr "Podaci o LPD redu" -#: kprinterimpl.cpp:423 +#: management/kmwlpd.cpp:44 msgid "" -"Enter the information concerning the remote LPD queue; this wizard will " +"check it before continuing.
" msgstr "" +"Unesite podatke o udaljenom LPD redu; ovaj čarobnjak će ih provjeriti prije " +"nastavka.
" -#: kprinterimpl.cpp:441 -msgid "Filtering print data" -msgstr "Filtriranje podataka za ispis" +#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 +#: rlpr/kmwrlpr.cpp:62 +msgid "Host:" +msgstr "Računalo:" -#: kprinterimpl.cpp:445 -msgid "Error while filtering. Command was: %1." -msgstr "Greška kod filtriranja. Naredba je bila:%1." +#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 +msgid "Queue:" +msgstr "Red:" -#: kprinterimpl.cpp:487 -msgid "%1
%1
The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. " +"
Note 3, regarding \"Other\": You cannot really select Other " +"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " +"information purposes only. " +"
To select 8, 9, 16 or other numbers of pages per sheet: " +"
You can select 2 alternatives: " +"
Use this combo box to select the printer to which you want to print. " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " +"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " +"a real printer, you need to... " +"
Note: It may happen that you successfully connected to a remote CUPS " +"server and still do not get a printer list. If this happens: force TDEPrint to " +"re-load its configuration files. To reload the configuration files, either " +"start kprinter again, or use the switch the print system away from CUPS and " +"back again once. The print system switch can be made through a selection in " +"the drop-down menu at bottom of this dialog when fully expanded).
This button opens a dialog where you can make decisions regarding all " +"supported print job options.
This button reduces the list of visible printers to a shorter, more " +"convenient, pre-defined list.
" +"This is particularly useful in enterprise environments with lots of " +"printers. The default is to show all printers.
" +"To create a personal 'selective view list', click on the " +"'System Options' button at the bottom of this dialog. Then, in the new " +"dialog, select 'Filter' (left column in the " +"TDE Print Configuration dialog) and setup your selection..
" +"Warning: Clicking this button without prior creation of a personal " +"'selective view list' will make all printers dissappear from the " +"view. (To re-enable all printers, just click this button again.)
This button starts the TDE Add Printer Wizard.
" +"Use the Wizard (with \"CUPS\" or \"RLPR\"" +") to add locally defined printers to your system.
" +"Note: The TDE Add Printer Wizard does not " +"work, and this button is disabled if you use \"Generic LPD\", " +"\"LPRng\", or \"Print Through an External Program\".)
Here you can enter any command that would also print for you in a " +"konsole window.
Example: " +"a2ps -P <printername> --medium=A3.
This button shows or hides additional printing options.
This button starts a new dialog where you can adjust various settings of " +"your printing system. Amongst them: " +"
If you enable this checkbox, the printing dialog stays open after you hit " +"the Print button.
" +"This is especially useful, if you need to test various print settings (like " +"color matching for an inkjet printer) or if you want to send your job to " +"multiple printers (one after the other) to have it finished more quickly.
" +"This button calls the \"File Open / Browse Directories\" dialog to allow you " +"to select a file for printing. Note, that " +"
Note: The preview feature (and therefore this checkbox) is only " +"visible for printjobs created from inside TDE applications. If you start " +"kprinter from the commandline, or if you use kprinter as a print command for " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"preview is not available here.
Note: (Button is only visible if the checkbox for " +"System Options --> General --> Miscellaneous: " +"\"Defaults to the last printer used in the application\" " +"is disabled.)
%1
" -msgstr "Primljena greška od upravitelja:%1
" +#: rlpr/kmwrlpr.cpp:124 +msgid "Remote queue %1 on %2" +msgstr "Udaljeni red %1 na %2" -#: management/kmmainview.cpp:649 -msgid "Internal error (no error message)." -msgstr "Interna greška: (nema poruke o grešci)." +#: rlpr/kmwrlpr.cpp:199 +msgid "No Predefined Printers" +msgstr "Nema postavljenih pisača" -#: management/kmmainview.cpp:667 -msgid "Unable to restart print server." -msgstr "Nije moguće ponovo pokrenuti poslužitelj pisača." +#: rlpr/kmconfigproxy.cpp:29 +msgid "Proxy" +msgstr "Proxy" -#: management/kmmainview.cpp:672 -msgid "Restarting server..." -msgstr "Ponovno pokrenćem poslužitelj..." +#: rlpr/kmconfigproxy.cpp:30 +msgid "RLPR Proxy Server Settings" +msgstr "Postavke RLPR proxy poslužitelja" -#: management/kmmainview.cpp:682 -msgid "Unable to configure print server." -msgstr "Nije moguće konfigurirati poslužitelj pisača." +#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 +msgid "" +"The %1 executable could not be found in your path. Check your " +"installation." +msgstr "" +"Izvršna datoteka %1 nije pronađena u vašoj putanji. Provjerite " +"instalaciju." -#: management/kmmainview.cpp:687 -msgid "Configuring server..." -msgstr "Podešavam poslužitelj..." +#: rlpr/krlprprinterimpl.cpp:73 +msgid "The printer is incompletely defined. Try to reinstall it." +msgstr "Pisač nije u cijelosti podešen. Pokušajte ga ponovno instalirati." -#: management/kmmainview.cpp:842 +#: plugincombobox.cpp:33 +#, fuzzy msgid "" -"Unable to start printer tool. Possible reasons are: no printer selected, the " -"selected printer doesn't have any local device defined (printer port), or the " -"tool library could not be found." +"This combo box shows (and lets you select) a print subsystem to be used by " +"TDEPrint. (This print subsystem must, of course, be installed inside your " +"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " +"itself upon first startup. Most Linux distributions have \"CUPS\", the " +"Common UNIX Printing System.
This line shows which CUPS server your PC is currently connected to for " +"printing and retrieving printer info. To switch to a different CUPS server, " +"click \"System Options\", then select \"Cups server\" and fill in the required " +"info.
Unable to perform the requested page selection. The filter psselect " +"cannot be inserted in the current filter chain. See Filter " +"tab in the printer properties dialog for further information.
" +msgstr "" + +#: kprinterimpl.cpp:355 +msgid "Could not load filter description for %1.
" +msgstr "Nemoguće učitati opis filtera za %1.
" -#: management/kminfopage.cpp:121 +#: kprinterimpl.cpp:371 msgid "" -"_: Unknown class of printer\n" -"Unknown" -msgstr "Nepoznat" +"Error while reading filter description for %1" +". Empty command line received.
" +msgstr "" +"Greška kod čitanja opisa filtera za %1. Primljen prazninaredbeni " +"redak.
" -#: management/kmpropcontainer.cpp:35 -msgid "Change..." -msgstr "Promijeni..." +#: kprinterimpl.cpp:385 +msgid "" +"The MIME type %1 is not supported as input of the filter chain (this may happen " +"with non-CUPS spoolers when performing page selection on a non-PostScript " +"file). Do you want TDE to convert the file to a supported format?" +msgstr "" -#: management/kmwdrivertest.cpp:41 -msgid "Printer Test" -msgstr "Proba pisača" +#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 +msgid "Convert" +msgstr "Pretvori" -#: management/kmwdrivertest.cpp:51 -msgid "Manufacturer:" -msgstr "Proizvođač:" +#: kprinterimpl.cpp:399 +msgid "Select MIME Type" +msgstr "Odaberite MIME tip" -#: management/kmwdrivertest.cpp:52 -msgid "Model:" -msgstr "Model:" +#: kprinterimpl.cpp:400 +msgid "Select the target format for the conversion:" +msgstr "Odaberite ciljni oblik za pretvorbu:" -#: management/kmwdrivertest.cpp:53 -msgid "Description:" -msgstr "Opis:" +#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 +msgid "Operation aborted." +msgstr "Postupak je prekinut." -#: management/kmwdrivertest.cpp:55 -msgid "&Test" -msgstr "&Proba" +#: kprinterimpl.cpp:410 +msgid "No appropriate filter found. Select another target format." +msgstr "Nije nađen prikladan filter. Odaberite drugi ciljni oblik." -#: management/kmwdrivertest.cpp:59 +#: kprinterimpl.cpp:423 msgid "" -"Now you can test the printer before finishing installation. Use the " -"Settings button to configure the printer driver and the Test " -"button to test your configuration. Use the Back " -"button to change the driver (your current configuration will be discarded).
" +"Sada možete probati pisač prije negoli završite postavljanje. Koristite " -"Postavke gumb za podešavanje pisača i Proba " -"gumb za probanje postavki. Koristite Natrag gumb za promjenu " -"upravljačkog programa, pri čemu će sve sadašnje postavke biti odbačene.
" -#: management/kmwdrivertest.cpp:117 -msgid "%1
%1
%1
%1
This button calls a little dialog to let you select a filter here.
" +"Note 1: You can chain different filters as long as you make sure " +"that the output of one fits as input of the next. (TDEPrint checks your " +"filtering chain and will warn you if you fail to do so.
" +"Note 2: The filters you define here are applied to your jobfile " +"before it is handed downstream to your spooler and print subsystem " +"(e.g. CUPS, LPRng, LPD).
This button removes the highlighted filter from the list of filters.
This button moves the highlighted filter up in the list of filters, towards " +"the front of the filtering chain.
This button moves the highlighted filter down in the list of filters, " +"towards the end of the filtering chain..
This button lets you configure the currently highlighted filter. It opens a " +"separate dialog.
This field shows some general info about the selected filter. Amongst them " +"are: " +"
This field shows which filters are currently selected to act as " +"'pre-filters' for TDEPrint. Pre-filters are processing the print files " +"before they are send downstream to your real print subsystem.
" +"The list shown in this field may be empty (default).
" +"The pre-filters act on the printjob in the order they are listed (from top " +"to bottom). This is done by acting as a filtering chain " +"where the output of one filter acts as input to the next. By putting the " +"filters into the wrong order, you can make the filtering chain fail. For " +"example: if your file is ASCII text, and you want the output being processed " +"by the 'Multipage per Sheet' filter, the first filter must be one that " +"processes ASCII into PostScript.
" +"TDEPrint can utilize any external filtering program which you may " +"find useful through this interface.
" +"TDEPrint ships preconfigured with support for a selection of common filters. " +"These filters however need to be installed independently from TDEPrint. These " +"pre-filters work for all print subsystems supported by TDEPrint (such " +"as CUPS, LPRng and LPD), because they are not depending on these.
." +"Amongst the pre-configured filters shipping with TDEPrint are:
" +"Please click on the other elements of this dialog to learn more about the " +"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " +"supported by its follower. See Filters tab for more information.
" +msgstr "" -#: management/kmjobviewer.cpp:276 -#, fuzzy -msgid "Hide Only User Jobs" -msgstr "Pokaži samo poslove korisnika" +#: kpfilterpage.cpp:408 +msgid "Input" +msgstr "Ulaz" -#: management/kmjobviewer.cpp:284 -msgid "User Name" -msgstr "Ime korisnika" +#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 +msgid "Output" +msgstr "Izlaz" -#: management/kmjobviewer.cpp:301 -msgid "&Select Printer" -msgstr "&Odaberi pisač" +#: kpfileselectpage.cpp:33 +msgid "&Files" +msgstr "&Datoteke" -#: management/kmjobviewer.cpp:330 -msgid "Refresh" -msgstr "Osvježi" +#: kprintpreview.cpp:140 +msgid "Do you want to continue printing anyway?" +msgstr "Želite li svejedno nastaviti ispis?" -#: management/kmjobviewer.cpp:334 -msgid "Keep window permanent" -msgstr "Zadrži prozor stalno" +#: kprintpreview.cpp:148 kprintpreview.cpp:227 +msgid "Print Preview" +msgstr "Pogled prije ispisa" -#: management/kmjobviewer.cpp:479 +#: kprintpreview.cpp:278 msgid "" -"Unable to perform action \"%1\" on selected jobs. Error received from manager:" +"The preview program %1 cannot be found. Check that the program is correctly " +"installed and located in a directory included in your PATH environment " +"variable." msgstr "" -"Nije moguće izvršiti zadatak \"%1\" na odabranim zadacima. Primljena pogreška " -"od upravitelja:" - -#: management/kmjobviewer.cpp:491 -msgid "Hold" -msgstr "Drži" - -#: management/kmjobviewer.cpp:496 -msgid "Resume" -msgstr "Nastavi" +"Program za pogled prije ispisa %1 nije nađen. Provjerite da je ispravno " +"postavljen i smješten u direktorij i uključen u vašu PATH okolišnu varijablu." -#: management/kmjobviewer.cpp:506 -msgid "Restart" -msgstr "Ponovno" +#: kprintpreview.cpp:303 +msgid "" +"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " +"other external PostScript viewer could be found." +msgstr "" +"Pogled nije uspio: nije nađen niti interni TDE PostScript preglednik " +"(KGhostView) niti neki drugi vanjski PostScript preglednik " -#: management/kmjobviewer.cpp:514 +#: kprintpreview.cpp:307 #, c-format -msgid "Move to %1" -msgstr "Premjesti na %1" - -#: management/kmjobviewer.cpp:674 -msgid "Operation failed." -msgstr "Postupak nije uspio." - -#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699 -msgid "Print Job Settings" -msgstr "Postavke poslova ispisa" - -#: management/kmconfigcommand.cpp:33 -msgid "Commands" -msgstr "Naredbe" +msgid "" +"Preview failed: TDE could not find any application to preview files of type %1." +msgstr "" -#: management/kmconfigcommand.cpp:34 -msgid "Command Settings" -msgstr "Postavke naredbi" +#: kprintpreview.cpp:317 +#, c-format +msgid "Preview failed: unable to start program %1." +msgstr "Pregled nije uspio: Nije moguće pokrenuti program %1." -#: management/kmconfigcommand.cpp:37 -msgid "Edit/Create Commands" -msgstr "Izmjena/izrada naredbi" +#: kprintpreview.cpp:322 +msgid "Do you want to continue printing?" +msgstr "Želite li nastaviti ispis?" -#: management/kmconfigcommand.cpp:39 +#: kpdriverpage.cpp:48 +#, fuzzy msgid "" -"Command objects perform a conversion from input to output."
-" Brightness: Slider to control the brightness value of all colors "
+"used. The brightness value can range from 0 to 200. Values greater than 100 will "
+"lighten the print. Values less than 100 will darken the print. Additional hint for power users: This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter: "
+"
They are used as the basis to build both print filters and special "
-"printers. They are described by a command string, a set of options, a set of "
-"requirements and associated mime types. Here you can create new command objects "
-"and edit existing ones. All changes will only be effective for you."
+"
"
+"
"
+" -o brightness=... # use range from \"0\" to \"200\"
Hue (Tint): Slider to control the hue value for color rotation.
" +"The hue value is a number from -360 to 360 and represents the color hue " +"rotation. The following table summarizes the change you will see for the base " +"colors: " +"
Original | " +"hue=-45 | " +"hue=45 |
---|---|---|
Red | " +"Purple | " +"Yellow-orange |
Green | " +"Yellow-green | " +"Blue-green |
Yellow | " +"Orange | " +"Green-yellow |
Blue | " +"Sky-blue | " +"Purple |
Magenta | " +"Indigo | " +"Crimson |
Cyan | " +"Blue-green | " +"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " +"used.
" +"The saturation value adjusts the saturation of the colors in an image, " +"similar to the color knob on your television. The color saturation value.can " +"range from 0 to 200. On inkjet printers, a higher saturation value uses more " +"ink. On laserjet printers, a higher saturation uses more toner. A color " +"saturation of 0 produces a black-and-white print, while a value of 200 will " +"make the colors extremely intense.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o saturation=... # use range from \"0\" to \"200\"" +"
Gamma: Slider to control the gamma value for color correction.
" +"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " +"lightens the print. A gamma value less than 1000 darken the print. The default " +"gamma is 1000.
" +"Note:
the gamma value adjustment is not visible in the thumbnail " +"preview. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o gamma=... # use range from \"1\" to \"3000\"" +"
Locally-connected printer
" -"Use this for a printer connected to the computer via a parallel, serial or " -"USB port.
Image Printing Options
" +"All options controlled on this page only apply to printing images. Most " +"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " +"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " +"output of image printouts are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
Shared Windows printer
" -"Use this for a printer installed on a Windows server and shared on the " -"network using the SMB protocol (samba).
Coloration Preview Thumbnail
" +"The coloration preview thumbnail indicates change of image coloration by " +"different settings. Options to influence output are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
Print queue on a remote LPD server
" -"Use this for a print queue existing on a remote machine running a LPD print " -"server.
Image Size: Dropdown menu to control the image size on the printed " +"paper. Dropdown works in conjunction with slider below. Dropdown options " +"are:.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o natural-scaling=... # range in % is 1....800 " +"" +"
-o scaling=... # range in % is 1....800 " +"
-o ppi=... # range in ppi is 1...1200
Network TCP printer
" -"Use this for a network-enabled printer using TCP (usually on port 9100) as " -"communication protocol. Most network printers can use this mode.
Position Preview Thumbnail
" +"This position preview thumbnail indicates the position of the image on the " +"paper sheet. " +"
Click on horizontal and vertical radio buttons to move image alignment on " +"paper around. Options are: " +"
The printing will be redirected to a file. Enter here the path of the file " -"you want to use for redirection. Use an absolute path or the browse button for " -"graphical selection.
" +"Reset to Default Values
" +"Reset all coloration settings to default values. Default values are: " +"
Ispis će biti preusmjeren u datoteku. Unesite putanju datoteke u koju " -"želite preusmjeriti ispis. Koristite apslolutnu putanju ili koristite gumb za " -"grafički odabir pomoću dijaloga.
" - -#: management/kmwfile.cpp:44 -msgid "Print to file:" -msgstr "Ispis u datoteku:" - -#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 -msgid "Empty file name." -msgstr "Prazno ime datoteke." -#: management/kmwfile.cpp:66 -msgid "Directory does not exist." -msgstr "Imenik ne postoji." +#: cups/kpimagepage.cpp:222 +msgid "" +"Image Positioning:
" +"Select a pair of radiobuttons to move image to the position you want on the " +"paper printout. Default is 'center'.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o position=... # examples: \"top-left\" or \"bottom\"" +"
Characters Per Inch
" +"This setting controls the horizontal size of characters when printing a text " +"file.
" +"The default value is 10, meaning that the font is scaled in a way that 10 " +"characters per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" +"This setting controls the vertical size of characters when printing a text " +"file.
" +"The default value is 6, meaning that the font is scaled in a way that 6 " +"lines per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o lpi=... # example \"5\" or \"7\"
Columns
" +"This setting controls how many columns of text will be printed on each page " +"when. printing text files.
" +"The default value is 1, meaning that only one column of text per page will " +"be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" +"These settings control the appearance of text on printouts. They are only " +"valid for printing text files or input directly through kprinter.
" +"Note: These settings have no effect whatsoever for other input " +"formats than text, or for printing from applications such as the KDE Advanced " +"Text Editor. (Applications in general send PostScript to the print system, and " +"'kate' in particular has its own knobs to control the print output.
. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\" " +"
-o lpi=... # example: \"5\" or \"7\" " +"
-o columns=... # example: \"2\" or \"4\"
Margins
" +"These settings control the margins of printouts on the paper. They are not " +"valid for jobs originating from applications which define their own page " +"layout internally and send PostScript to TDEPrint (such as KOffice or " +"OpenOffice.org).
" +"When printing from KDE applications, such as KMail and Konqueror, or " +"printing an ASCII text file through kprinter, you can choose your preferred " +"margin settings here.
" +"Margins may be set individually for each edge of the paper. The combo box at " +"the bottom lets you change the units of measurement between Pixels, " +"Millimeters, Centimeters, and Inches.
" +"You can even use the mouse to grab one margin and drag it to the intended " +"position (see the preview picture on the right side).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-top=... # example: \"72\" " +"
-o page-bottom=... # example: \"24\" " +"
-o page-left=... # example: \"36\" " +"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" +"ASCII text file printouts can be 'prettyfied' by enabling this option. If " +"you do so, a header is printed at the top of each page. The header contains " +"the page number, job title (usually the filename), and the date. In addition, C " +"and C++ keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true.
Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" +"ASCII text file printing with this option turned off are appearing without a " +"page header and without syntax highlighting. (You can still set the page " +"margins, though.)
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" +"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " +"so, a header is printed at the top of each page. The header contains the page " +"number, job title (usually the filename), and the date. In addition, C and C++ " +"keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true. " +"
-o prettyprint=false
Print queue on remote CUPS server
" +"Use this for a print queue installed on a remote machine running a CUPS " +"server. This allows to use remote printers when CUPS browsing is turned off.
" +"Network IPP printer
" +"Use this for a network-enabled printer using the IPP protocol. Modern " +"high-end printers can use this mode. Use this mode instead of TCP if your " +"printer can do both.
Fax/Modem printer
" +"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " +"backend. Documents sent on this printer will be faxed to the given target fax " +"number.
Other printer
" +"Use this for any printer type. To use this option, you must know the URI of " +"the printer you want to install. Refer to the CUPS documentation for more " +"information about the printer URI. This option is mainly useful for printer " +"types using 3rd party backends not covered by the other possibilities.
Class of printers
" +"Use this to create a class of printers. When sending a document to a class, " +"the document is actually sent to the first available (idle) printer in the " +"class. Refer to the CUPS documentation for more information about class of " +"printers.
%1
Enter the information concerning your printer or class. Name " -"is mandatory, Location and Description " -"are not (they may even not be used on some systems).
" -msgstr "" +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "False" +msgstr "Netočno" -#: management/kmwname.cpp:39 -msgid "Name:" -msgstr "Ime:" +#: cups/kmwfax.cpp:39 +msgid "Fax Serial Device" +msgstr "Fax serijski uređaj" -#: management/kmwname.cpp:48 -msgid "You must supply at least a name." -msgstr "Morate upisati barem ime!" +#: cups/kmwfax.cpp:43 +msgid "Select the device which your serial Fax/Modem is connected to.
" +msgstr "Odaberite gdje je spojen vaš serijski Fax/Modem.
" -#: management/kmwname.cpp:56 +#: cups/kmwfax.cpp:81 +msgid "You must select a device." +msgstr "Morate navesti uređaj." + +#: cups/kphpgl2page.cpp:33 msgid "" -"It is usually not a good idea to include spaces in printer name: it may prevent " -"your printer from working correctly. The wizard can strip all spaces from the " -"string you entered, resulting in %1; what do you want to do?" +"The 'blackplot' option specifies that all pens should plot in black-only: " +"The default is to use the colors defined in the plot file, or the standard pen " +"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o blackplot=true
The 'fitplot' option specifies that the HP-GL image should be scaled to fill " +" exactly the page with the (elsewhere selected) media size.
" +"The default is 'fitplot is disabled'. The default will therefore use the " +"absolute distances specified in the plot file. (You should be aware that HP-GL " +"files are very often CAD drawings intended for large format plotters. On " +"standard office printers they will therefore lead to the drawing printout " +"being spread across multiple pages.)
" +"Note:This feature depends upon an accurate plot size (PS) command in " +"the HP-GL/2 file. If no plot size is given in the file the filter converting " +"the HP-GL to PostScript assumes the plot is ANSI E size.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o fitplot=true
The pen width value can be set here in case the original HP-GL file does not " +"have it set. The pen width specifies the value in micrometers. The default " +"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " +"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " +"wide.
" +"Note: The penwidth option set here is ignored if the pen widths are " +"set inside the plot file itself..
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o penwidth=... # example: \"2000\" or \"500\"
This backend may require a login/password to work properly. Select the type " -"of access to use and fill in the login and password entries if needed.
" +"All options on this page are only applicable if you use TDEPrint to send " +"HP-GL and HP-GL/2 files to one of your printers.
" +"HP-GL and HP-GL/2 are page description languages developed by " +"Hewlett-Packard to drive Pen Plotting devices.
" +"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " +"it on any installed printer.
" +"Note 1: To print HP-GL files, start 'kprinter' and simply load the " +"file into the running kprinter.
" +"Note 2: The 'fitplot' parameter provided on this dialog does also " +"work for printing PDF files (if your CUPS version is more recent than " +"1.1.22).
" +"Additional hint for power users: These TDEPrint GUI elements " +"match with CUPS commandline job option parameters: " +"
-o blackplot=... # examples: \"true\" or \"false\" " +"
-o fitplot=... # examples: \"true\" or \"false\" " +"
-o penwidth=... # examples: \"true\" or \"false\"
Several drivers have been detected for this model. Select the driver you " -"want to use. You will have the opportunity to test it as well as to change it " -"if necessary.
" -msgstr "" -"Za ovaj model je nađeno nekoliko upravljačkih programa. Odaberite " -"upravljački program koji želite koristiti. Imat ćete priliku isprobati ga i po " -"potrebi izmijeniti.
" +#: cups/kmcupsconfigwidget.cpp:76 +msgid "Pass&word:" +msgstr "&Šifra:" -#: management/kmwdriverselect.cpp:46 -msgid "Driver Information" -msgstr "Informacije o upravljačkom programu" +#: cups/kmcupsconfigwidget.cpp:79 +msgid "&Store password in configuration file" +msgstr "Spremi lozinku u datoteku postavki." -#: management/kmwdriverselect.cpp:62 -msgid "You must select a driver." -msgstr "Morate navesti upravljački program!" +#: cups/kmcupsconfigwidget.cpp:81 +msgid "Use &anonymous access" +msgstr "Koristi &anonimni pristup" -#: management/kmwdriverselect.cpp:82 -msgid " [recommended]" -msgstr " [preporučeno]" +#: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 +msgid "&Export" +msgstr "&Izvoz" -#: management/kmwdriverselect.cpp:113 -msgid "No information about the selected driver." -msgstr "Nemam podataka o odabarnom goniču." +#: cups/cupsaddsmb2.cpp:61 +#, fuzzy +msgid "Export Printer Driver to Windows Clients" +msgstr "Izvoz upravljačkog programa pisača na Windows klijente" -#: management/kmpropbackend.cpp:34 -msgid "Printer type:" -msgstr "Vrsta pisača:" +#: cups/cupsaddsmb2.cpp:72 +msgid "&Username:" +msgstr "&Korisničko ime:" -#: management/kmpropbackend.cpp:48 -msgid "Interface" -msgstr "Sučelje" +#: cups/cupsaddsmb2.cpp:73 +msgid "&Samba server:" +msgstr "Samba poslužitelj" -#: management/kmpropbackend.cpp:49 -msgid "Interface Settings" -msgstr "Postavke sučelja" +#: cups/cupsaddsmb2.cpp:79 +msgid "" +"Samba server
Adobe Windows PostScript driver files plus the CUPS " +"printer PPD will be exported to the [print$] " +"special share of the Samba server (to change the source CUPS server, use the " +"Samba username
User needs to have write access to the " +"[print$] share on the Samba server. [print$] " +"holds printer drivers prepared for download to Windows clients. This dialog " +"does not work for Samba servers configured with security = share " +"(but works fine with security = user)." +msgstr "" -#: management/kmpropbackend.cpp:63 -msgid "Local USB Printer" -msgstr "Lokalni USB pisač" +#: cups/cupsaddsmb2.cpp:96 +msgid "" +"Samba password
The Samba setting encrypt passwords = yes " +"(default) requires prior use of smbpasswd -a [username] " +"command, to create an encrypted Samba password and have Samba recognize it." +msgstr "" -#: management/kmpropbackend.cpp:64 -msgid "Local Parallel Printer" -msgstr "Lokalni paralelni pisač" +#: cups/cupsaddsmb2.cpp:267 +#, c-format +msgid "Creating folder %1" +msgstr "Stvaram direktorij %1" -#: management/kmpropbackend.cpp:65 -msgid "Local Serial Printer" -msgstr "Lokalni serijski pisač" +#: cups/cupsaddsmb2.cpp:275 +#, c-format +msgid "Uploading %1" +msgstr "Učitavam %1" -#: management/kmpropbackend.cpp:66 -msgid "Network Printer (socket)" -msgstr "Mrežni pisač (socket)" +#: cups/cupsaddsmb2.cpp:283 +#, c-format +msgid "Installing driver for %1" +msgstr "Postavljam upravljački program za %1" -#: management/kmpropbackend.cpp:67 -msgid "SMB printers (Windows)" -msgstr "SMB (windows) pisač" +#: cups/cupsaddsmb2.cpp:291 +#, c-format +msgid "Installing printer %1" +msgstr "Postavljam pisač %1" -#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 -#: rlpr/kmwrlpr.cpp:116 -msgid "Remote LPD queue" -msgstr "Udaljeno LPD čekanje" +#: cups/cupsaddsmb2.cpp:333 +msgid "Driver successfully exported." +msgstr "Upravljački program uspješno izvezen." -#: management/kmpropbackend.cpp:69 -msgid "File printer" -msgstr "Pisač u datoteku" +#: cups/cupsaddsmb2.cpp:343 +msgid "" +"Operation failed. Possible reasons are: permission denied or invalid Samba " +"configuration (see cupsaddsmb " +"manual page for detailed information, you need " +"CUPS version 1.1.11 or higher). You may want to try again with another " +"login/password." +msgstr "" -#: management/kmpropbackend.cpp:70 -msgid "Serial Fax/Modem printer" -msgstr "Serijski Fax/Modem pisač" +#: cups/cupsaddsmb2.cpp:352 +msgid "Operation aborted (process killed)." +msgstr "Postupak prekinut (proces ubijen)." -#: management/kmpropbackend.cpp:71 +#: cups/cupsaddsmb2.cpp:358 +msgid "%1
" +msgstr "%1
" + +#: cups/cupsaddsmb2.cpp:373 msgid "" -"_: Unknown Protocol\n" -"Unknown" -msgstr "Nepoznat" +"You are about to prepare the %1 driver to be shared out to Windows " +"clients through Samba. This operation requires the " +"Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " +"service on the target server. Click Export to start the operation. Read " +"the cupsaddsmb manual page in Konqueror or type " +"man cupsaddsmb in a console window to learn more about this " +"functionality." +msgstr "" -#: management/kmconfigdialog.cpp:38 -msgid "TDE Print Configuration" -msgstr "TDE postavke ispisa" +#: cups/cupsaddsmb2.cpp:393 +msgid "" +"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " +"CUPS version 1.1.11 or higher)." +msgstr "" -#: management/kmpropdriver.cpp:36 -msgid "Manufacturer:" -msgstr "Proizvođač:" +#: cups/cupsaddsmb2.cpp:404 +#, c-format +msgid "Preparing to upload driver to host %1" +msgstr "Priprema slanja upravljačkog programa na računalu %1" -#: management/kmpropdriver.cpp:37 -msgid "Printer model:" -msgstr "Model pisača:" +#: cups/cupsaddsmb2.cpp:415 +msgid "The driver for printer %1 could not be found." +msgstr "Ne mogu naći upravljački program za pisač %1." -#: management/kmpropdriver.cpp:38 -msgid "Driver info:" -msgstr "Podaci o goniču:" +#: cups/cupsaddsmb2.cpp:455 +#, c-format +msgid "Preparing to install driver on host %1" +msgstr "Priprema instalacije upravljačkog programa na računalu %1" -#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 -#: management/kmwend.cpp:104 -msgid "Driver" -msgstr "Upravljački program" +#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 +msgid "Users Access Settings" +msgstr "Postavke pristupa korisnika" -#: management/kmwsocket.cpp:38 -msgid "Network Printer Information" -msgstr "Podaci o mrežnom pisaču" +#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 +msgid "Users" +msgstr "Korisnici" -#: management/kmwsocket.cpp:48 -msgid "&Printer address:" -msgstr "Adresa &pisača:" +#: cups/kmwusers.cpp:41 +msgid "Allowed Users" +msgstr "Dozvoljeni korisnici" -#: management/kmwsocket.cpp:49 -msgid "P&ort:" -msgstr "P&ort:" +#: cups/kmwusers.cpp:42 +msgid "Denied Users" +msgstr "Zabranjeni korisnici" -#: management/kmwsocket.cpp:99 -msgid "You must enter a printer address." -msgstr "Morate upisati adresu pisača!" +#: cups/kmwusers.cpp:44 +msgid "Define here a group of allowed/denied users for this printer." +msgstr "Ovdje podešavate grupe korisnika koje imaju/nemaju pristup pisaču." -#: management/kmwsocket.cpp:110 -msgid "Wrong port number." -msgstr "Krivi broj porta." +#: cups/kmwippprinter.cpp:45 +msgid "IPP Printer Information" +msgstr "IPP informacije o pisaču" -#: management/kmwizard.cpp:64 management/kmwizard.cpp:209 -msgid "&Next >" -msgstr "&Dalje >" +#: cups/kmwippprinter.cpp:55 +msgid "&Printer URI:" +msgstr "URI &pisača:" -#: management/kmwizard.cpp:66 -msgid "< &Back" -msgstr "< Natra&g" +#: cups/kmwippprinter.cpp:64 +msgid "" +"Either enter the printer URI directly, or use the network scanning " +"facility.
" +msgstr "Unesite URL pisača ili koristite uslugu pregledavanja mreže.
" -#: management/kmwizard.cpp:131 management/kmwizard.cpp:166 -#: management/kmwizard.cpp:191 -msgid "Add Printer Wizard" -msgstr "Čarobnjak za dodavanje pisača" +#: cups/kmwippprinter.cpp:65 +#, fuzzy +msgid "&IPP Report" +msgstr "IPP izvješće" -#: management/kmwizard.cpp:166 -msgid "Modify Printer" -msgstr "Izmjena postavki pisača" +#: cups/kmwippprinter.cpp:112 +msgid "You must enter a printer URI." +msgstr "Morate upisati uri pisača!" -#: management/kmwizard.cpp:191 -msgid "Unable to find the requested page." -msgstr "Nije moguće pronaći traženu stranicu." +#: cups/kmwippprinter.cpp:173 +msgid "Name: %1Welcome,
" -"This wizard will help to install a new printer on your computer. It will " -"guide you through the various steps of the process of installing and " -"configuring a printer for your printing system. At each step, you can always go " -"back using the Back button.
" -"We hope you enjoy this tool!
" -"Enter the information concerning the remote IPP server owning the targeted " +"printer. This wizard will poll the server before continuing.
" +msgstr "" +"Unesite podatke o udaljenom IPP poslužitelju koji posjeduje ciljni pisač. " +"Ovaj čarobnjak će sakupiti poslužitelj prije nastavka.
" -#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 -#: management/kxmlcommanddlg.cpp:866 -msgid "&Description:" -msgstr "&Opis:" +#: cups/kmwipp.cpp:43 +msgid "Port:" +msgstr "Port:" -#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 -msgid "&Format:" -msgstr "&Format:" +#: cups/kmwipp.cpp:59 +msgid "Incorrect port number." +msgstr "Neispravni broj porta." -#: management/kxmlcommanddlg.cpp:118 -msgid "Default &value:" -msgstr "Uobičajena &vrijednost:" +#: cups/kmwipp.cpp:72 +msgid "Print Job Billing and Accounting
" +"Insert a meaningful string here to associate the current print job with a " +"certain account. This string will appear in the CUPS \"page_log\" to help with " +"the print accounting in your organization. (Leave it empty if you do not need " +"it.) " +"
It is useful for people who print on behalf of different \"customers\", " +"like print service bureaux, letter shops, press and prepress companies, or " +"secretaries who serve different bosses, etc.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-billing=... # example: \"Marketing_Department\" or " +"\"Joe_Doe\"
Scheduled Printing
" +"Scheduled printing lets you control the time of the actual printout, while " +"you can still send away your job now and have it out of your way. " +"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " +"you to park your job until a time when you (or a printer administrator) decides " +"to manually release it. " +"
This is often required in enterprise environments, where you normally are " +"not allowed to directly and immediately access the huge production printers in " +"your Central Repro Department. However it is okay to send jobs to the " +"queue which is under the control of the operators (who, after all, need to make " +"sure that the 10,000 sheets of pink paper which is required by the Marketing " +"Department for a particular job are available and loaded into the paper " +"trays).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " +"
Page Labels
" +"Page Labels are printed by CUPS at the top and bottom of each page. They " +"appear on the pages surrounded by a little frame box. " +"
They contain any string you type into the line edit field.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-label=\"...\" # example: \"Company Confidential\"" +"
Job Priority
" +"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " +"First In, First Out. " +"
The job priority option allows you to re-order the queue according to your " +"needs. " +"
It works in both directions: you can increase as well as decrease " +"priorities. (Usually you can only control your own jobs). " +"
Since the default job priority is \"50\", any job sent with, for example, " +"\"49\" will be printed only after all those others have finished. Conversely, a " +"\"51\" or higher priority job will go right to the top of a populated queue (if " +"no other, higher prioritized one is present).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" +"
Enter the URI corresponding to the printer to be installed. Examples:
" +"Set here the quota for this printer. Using limits of 0 "
+"means that no quota will be used. This is equivalent to set quota period to "
+"
Select a valid detected port, or enter directly the corresponding URI in the " -"bottom edit field.
" +"Select the default banners associated with this printer. These banners will " +"be inserted before and/or after each print job sent to the printer. If you " +"don't want to use banners, select No Banner.
" msgstr "" -"Odaberite ispravno prepoznat port ili unesite direktno odgovarajući URL u " -"donje polje.
" +"Odaberite uobičajene naslove vezane uz ovaj pisač. Ti naslovi bit će " +"umetnuti prije i/ili nakon svakog ispisa poslanog na pisač. Ako ne želite " +"koristiti naslove, odaberite nijedan.
" -#: management/kmwlocal.cpp:78 +#: cups/kptagspage.cpp:36 msgid "" -"_: The URI is empty\n" -"Empty URI." +"Additional Tags
You may send additional commands to the CUPS " +"server via this editable list. There are 3 purposes for this: " +"Standard CUPS job options: A complete list of standard CUPS job " +"options is in the CUPS User Manual" +". Mappings of the kprinter user interface widgets to respective CUPS job " +"option names are named in the various WhatsThis help items..
" +"Custom CUPS job options: CUPS print servers may be customized with " +"additional print filters and backends which understand custom job options. You " +"can specify such custom job options here. If in doubt, ask your system " +"administrator..
" +"" +"
Operator Messages: You may send additional messages to the " +"operator(s) of your production printers (e.g. in your " +"Central Repro Department
) Messages can be read by the operator(s) (or " +"yourself) by viewing the \"Job IPP Report\" for the job. " +"Examples:" +"A standard CUPS job option:" +"" +"
(Name) number-up -- (Value) 9 " +"
" +"
A job option for custom CUPS filters or backends:" +"
(Name) DANKA_watermark -- " +"(Value) Company_Confidential " +"
" +"
A message to the operator(s):" +"
(Name) Deliver_after_completion -- " +"(Value) to_Marketing_Departm." +"
Note: the fields must not include spaces, tabs or quotes. You may " +"need to double-click on a field to edit it. " +"
Warning: Do not use such standard CUPS option names which also can be " +"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " +" or if they are sent multiple times. For all options supported by the GUI, " +"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " +"option name.)
Enter the information concerning the remote LPD queue; this wizard will " -"check it before continuing.
" -msgstr "" -"Unesite podatke o udaljenom LPD redu; ovaj čarobnjak će ih provjeriti prije " -"nastavka.
" +#: cups/kptagspage.cpp:77 +msgid "Additional Tags" +msgstr "Dodatne odrednice" -#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 -msgid "Queue:" -msgstr "Red:" +#: cups/kptagspage.cpp:83 +msgid "Value" +msgstr "Vrijednost" -#: management/kmwlpd.cpp:54 -msgid "Some information is missing." -msgstr "Neki podaci nedostaju." +#: cups/kptagspage.cpp:92 +msgid "Read-Only" +msgstr "Samo za čitanje" -#: management/kmwlpd.cpp:61 +#: cups/kptagspage.cpp:115 #, fuzzy -msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" -msgstr "Ne mogu naći red %1 na serveru %2! Želite li svejedno nastaviti?" - -#: management/kmconfigfilter.cpp:40 -msgid "Filter" -msgstr "Filter" +msgid "The tag name must not contain any spaces, tabs or quotes: %1." +msgstr "Naziv oznake ne može sadržati razmake: %1." -#: management/kmconfigfilter.cpp:41 -msgid "Printer Filtering Settings" -msgstr "Postavke filtera za pisač" +#: cups/kmpropbanners.cpp:50 +msgid "Banner Settings" +msgstr "Postavke naslova" -#: management/kmconfigfilter.cpp:44 -msgid "Printer Filter" -msgstr "Filter pisača" +#: cups/kmconfigcups.cpp:32 +msgid "CUPS Server" +msgstr "CUPS poslužitelj" -#: management/kmconfigfilter.cpp:56 -msgid "" -"The printer filtering allows you to view only a specific set of printers " -"instead of all of them. This may be useful when there are a lot of printers " -"available but you only use a few ones. Select the printers you want to see from " -"the list on the left or enter a Location filter (ex: Group_1*). Both are " -"cumulative and ignored if empty." -msgstr "" -"Filter pisača omogućava prikazivanje samo jedan dio pisača umjesto svih " -"odjednom. Ovo može biti vrlo korisno ako postoji mnogo pisača, a vi koristite " -"samo nekolicinu. Odaberite pisače koje želite vidjeti sa popisa lijevo ili " -"unesite Lokaciju filtera (npr:Grupa_1*). Obje su kumulativne i " -"zanemaruju se ako su prazne." +#: cups/kmconfigcups.cpp:33 +msgid "CUPS Server Settings" +msgstr "Postavke CUPS poslužitelja" -#: management/kmconfigfilter.cpp:62 -msgid "Location filter:" -msgstr "Lokacija filtra:" +#: tools/escputil/escpwidget.cpp:45 +msgid "EPSON InkJet Printer Utilities" +msgstr "Alati za EPSON InkJet pisače" -#: management/kmconfigfonts.cpp:43 -msgid "Font Settings" -msgstr "Postavke pisma" +#: tools/escputil/escpwidget.cpp:91 +msgid "&Use direct connection (might need root permissions)" +msgstr "&Koristi direktnu vezu (možda treba ovlasti root-a)" -#: management/kmconfigfonts.cpp:46 -msgid "Fonts Embedding" -msgstr "Ugrađivanje u pisama" +#: tools/escputil/escpwidget.cpp:103 +msgid "Clea&n print head" +msgstr "&Očisti glavu pisača" -#: management/kmconfigfonts.cpp:47 -msgid "Fonts Path" -msgstr "Putanja pisama" +#: tools/escputil/escpwidget.cpp:104 +msgid "&Print a nozzle test pattern" +msgstr "Is&piši uzorak za provjeru mlaznica" -#: management/kmconfigfonts.cpp:49 -msgid "&Embed fonts in PostScript data when printing" -msgstr "&Ugradi pisma u PostScript podatke kod ispisa" +#: tools/escputil/escpwidget.cpp:105 +msgid "&Align print head" +msgstr "Por&avnaj glave pisača" -#: management/kmconfigfonts.cpp:57 -msgid "&Up" -msgstr "&Gore" +#: tools/escputil/escpwidget.cpp:106 +msgid "&Ink level" +msgstr "Raz&ina tinte" -#: management/kmconfigfonts.cpp:58 -msgid "&Down" -msgstr "&Dolje" +#: tools/escputil/escpwidget.cpp:107 +msgid "P&rinter identification" +msgstr "Iden&tifikacija pisača" -#: management/kmconfigfonts.cpp:59 -msgid "&Add" -msgstr "&Dodaj" +#: tools/escputil/escpwidget.cpp:153 +msgid "Internal error: no device set." +msgstr "Interna greška: nije podešen nikakav uređaj." -#: management/kmconfigfonts.cpp:61 -msgid "Additional director&y:" -msgstr "&Dodatni direktorij:" +#: tools/escputil/escpwidget.cpp:164 +#, c-format +msgid "Unsupported connection type: %1" +msgstr "Nije podržana vrsta veze: %1" -#: management/kmconfigfonts.cpp:85 +#: tools/escputil/escpwidget.cpp:171 msgid "" -"These options will automatically put fonts in the PostScript file which are not " -"present on the printer. Font embedding usually produces better print results " -"(closer to what you see on the screen), but larger print data as well." +"An escputil process is still running. You must wait until its completion before " +"continuing." msgstr "" -"Ove postavke će automatski staviti pisma u PostScript datoteku koje nisu na " -"pisaču. Ugrađivanje pisama Obično daje bolji ispis (bliže onome što vidite na " -"zaslonu), ali također i povećava količinu podataka za ispis." +"Proces escputil još uvijek radi. Morate čekati dok on završi da biste mogli " +"nastaviti." -#: management/kmconfigfonts.cpp:89 +#: tools/escputil/escpwidget.cpp:179 msgid "" -"When using font embedding you can select additional directories where TDE " -"should search for embeddable font files. By default, the X server font path is " -"used, so adding those directories is not needed. The default search path should " -"be sufficient in most cases." +"The executable escputil cannot be found in your PATH environment variable. Make " +"sure gimp-print is installed and that escputil is in your PATH." msgstr "" -"Kada koristite ugrađivanje pisama, odna možete odabrati dodatne direktorije " -"gdje će TDE tražiti datoteke pisma. Obično se koristi putanja X poslužitelja " -"pisama, pa dodavanje drugih nije nužno. Uobičajena putanja za traženje će biti " -"dovoljna u većini slučajeva." +"Izvršna datoteka escputil nije nađena u vašoj PATH okolišnoj varijabli. " +"Provjerite je li gimp-print postavljen i je li escputil u vašoj putanji." -#: management/kmspecialprinterdlg.cpp:46 -msgid "Add Special Printer" -msgstr "Dodaj posebni pisač" +#: tools/escputil/escpwidget.cpp:204 +msgid "Internal error: unable to start escputil process." +msgstr "Interna pogreška: Nije moguće pokrenuti proces escputil." -#: management/kmspecialprinterdlg.cpp:58 -msgid "&Location:" -msgstr "&Lokacija:" +#: tools/escputil/escpwidget.cpp:214 +msgid "Operation terminated with errors." +msgstr "Operacija je završena sa greškama." -#: management/kmspecialprinterdlg.cpp:66 -msgid "Command &Settings" -msgstr "Po&stavke naredbi" +#: kprintprocess.cpp:75 +msgid "File transfer failed." +msgstr "Prijenos datoteka nije uspio." -#: management/kmspecialprinterdlg.cpp:69 -msgid "Outp&ut File" -msgstr "Izlazna datoteka" +#: kprintprocess.cpp:81 +msgid "Abnormal process termination (%1)." +msgstr "Nepravilan svršetak procesa (%1)." -#: management/kmspecialprinterdlg.cpp:71 -msgid "&Enable output file" -msgstr "&Omogući izlaznu datoteku" +#: kprintprocess.cpp:83 +msgid "%1: execution failed with message:%2
" +msgstr "%1: izvršavanje prekinuto s porukom:%2
" -#: management/kmspecialprinterdlg.cpp:88 -#, fuzzy -msgid "Filename e&xtension:" -msgstr "n&astavak imena datoteke:" +#: ppdloader.cpp:173 +msgid "(line %1): " +msgstr "(linija %1): " -#: management/kmspecialprinterdlg.cpp:105 +#: lpd/kmlpdmanager.cpp:87 +msgid "Local printer queue (%1)" +msgstr "Red čekanja lokalnog pisača (%1)" + +#: lpd/kmlpdmanager.cpp:87 msgid "" -"The command will use an output file. If checked, make sure the command " -"contains an output tag.
" -msgstr "" -"Naredba će koristiti izlaznu datoteku. Ako tako odaberete, budite sigurni da " -"naredba sadrži tag za izlaz.
" +"_: Unknown type of local printer queue\n" +"Unknown" +msgstr "Nepoznat" -#: management/kmspecialprinterdlg.cpp:108 -#, c-format +#: lpd/kmlpdmanager.cpp:88 +msgid "The command to execute when printing on this special printer. Either enter " -"the command to execute directly, or associate/create a command object with/for " -"this special printer. The command object is the preferred method as it provides " -"support for advanced settings like mime type checking, configurable options and " -"requirement list (the plain command is only provided for backward " -"compatibility). When using a plain command, the following tags are " -"recognized:
" -"The default mimetype for the output file (e.g. application/postscript).
" +"Unable to set correct permissions on spool directory %1 for printer %2." msgstr "" +"Nije moguće podesiti ispravna dopuštenja mape prikupljanja %1 za pisač %2" +"." -#: management/kmspecialprinterdlg.cpp:121 -msgid "The default extension for the output file (e.g. ps, pdf, ps.gz).
" -msgstr "" -"Uobičajen nastavak imena izlazne datoteke (npr. ps, pdf, ps.gz).
" +#: lpd/kmlpdmanager.cpp:237 +msgid "Permission denied: you must be root." +msgstr "Dopuštenje je uskraćeno: morate biti korijenski korisnik." -#: management/kmspecialprinterdlg.cpp:170 -msgid "You must provide a non-empty name." -msgstr "Morate navesti ulaznu datoteku." +#: lpd/kmlpdmanager.cpp:244 +msgid "Unable to execute command \"%1\"." +msgstr "Nije moguće izvršiti naredbu \"%1\"." -#: management/kmspecialprinterdlg.cpp:178 -#, c-format -msgid "Invalid settings. %1." -msgstr "Neispravne postavke, %1." +#: lpd/kmlpdmanager.cpp:317 +msgid "Unable to write printcap file." +msgstr "Nije moguće zapisati u datoteku printcap." -#: management/kmspecialprinterdlg.cpp:197 -#, c-format -msgid "Configuring %1" -msgstr "Podešavanje %1" +#: lpd/kmlpdmanager.cpp:372 +msgid "Couldn't find driver %1 in printtool database." +msgstr "" +"Nije moguće pronaći upravljački program %1 u bazi podataka printtool." -#: management/smbview.cpp:44 -msgid "Comment" -msgstr "Komentar" +#: lpd/kmlpdmanager.cpp:411 +msgid "Couldn't find printer %1 in printcap file." +msgstr "Nije moguće pronaći pisač %1 u datoteci printcap." -#: management/kmwend.cpp:33 -msgid "Confirmation" -msgstr "Potvrda" +#: lpd/kmlpdmanager.cpp:440 +msgid "No driver found (raw printer)" +msgstr "Nije pronađen upravljački program (izravni pisač)" -#: management/kmwend.cpp:50 management/kmwend.cpp:106 -#: management/kmwend.cpp:109 tdefilelist.cpp:102 -msgid "Type" -msgstr "Vrsta" +#: lpd/kmlpdmanager.cpp:442 +msgid "Printer type not recognized." +msgstr "Vrsta pisača nije prepoznata." -#: management/kmwend.cpp:52 -msgid "Location" -msgstr "Lokacija" +#: lpd/kmlpdmanager.cpp:452 +msgid "" +"The driver device %1 is not compiled in your GhostScript distribution. " +"Check your installation or use another driver." +msgstr "" +"Upravljački program %1 nije ugrađen u vašu GhostScript distribuciju. " +"Provjerite vašu instalaciju ili upotrijebite drugi upravljački program." -#: management/kmwend.cpp:69 -msgid "Backend" -msgstr "Backend" +#: lpd/kmlpdmanager.cpp:560 +msgid "Unable to write driver associated files in spool directory." +msgstr "" +"Nije moguće zapisati datoteke upravljačkog programa u mapu prikupljanja." -#: management/kmwend.cpp:74 -msgid "Device" -msgstr "Uređaj" +#: lpd/kmlpduimanager.cpp:44 +msgid "Local printer (parallel, serial, USB)" +msgstr "Lokalni pisač (paralelni, serijski, USB)" -#: management/kmwend.cpp:77 -msgid "Printer IP" -msgstr "IP Pisača" +#: lpd/kmlpduimanager.cpp:46 +msgid "SMB shared printer (Windows)" +msgstr "SMB dijeljeni pisač (Windows)" -#: management/kmwend.cpp:78 management/kmwend.cpp:89 -msgid "Port" -msgstr "Port" +#: lpd/kmlpduimanager.cpp:47 +msgid "Network printer (TCP)" +msgstr "Mrežni pisač (TCP)" -#: management/kmwend.cpp:81 management/kmwend.cpp:88 -msgid "Host" -msgstr "Računalo" +#: lpd/kmlpduimanager.cpp:48 +msgid "File printer (print to file)" +msgstr "Datotečni pisač (ispis u datoteku)" -#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 -msgid "Queue" -msgstr "Red" +#: lpd/lpdtools.cpp:31 +msgid "A4" +msgstr "A4" -#: management/kmwend.cpp:91 -msgid "Account" -msgstr "Račun" +#: lpd/lpdtools.cpp:32 +msgid "A3" +msgstr "A3" -#: management/kmwend.cpp:96 -msgid "URI" -msgstr "URL" +#: lpd/lpdtools.cpp:33 +msgid "B4" +msgstr "B4" -#: management/kmwend.cpp:109 -msgid "DB driver" -msgstr "DB upravljački program" +#: lpd/lpdtools.cpp:34 +msgid "B5" +msgstr "B5" -#: management/kmwend.cpp:109 -msgid "External driver" -msgstr "Vanjski upravljački program" +#: lpd/lpdtools.cpp:233 +msgid "GhostScript settings" +msgstr "GhostScript postavke" -#: management/kmwend.cpp:110 -msgid "Manufacturer" -msgstr "Proizvođač" +#: lpd/lpdtools.cpp:254 +msgid "Resolution" +msgstr "Rezolucija" -#: management/kmwend.cpp:111 -msgid "Model" -msgstr "Model" +#: lpd/lpdtools.cpp:277 +msgid "Color depth" +msgstr "Dubina boja" -#: management/kmwdriver.cpp:33 -msgid "Printer Model Selection" -msgstr "Odabir modela pisača" +#: lpd/lpdtools.cpp:301 +msgid "Additional GS options" +msgstr "Dodatne GS opcije" -#: management/kmwdriver.cpp:113 -msgid "Internal error: unable to locate the driver." -msgstr "Interna pogreška: Nije moguće pronaći upravljački program." +#: lpd/lpdtools.cpp:313 +msgid "Page size" +msgstr "Veličina papira" -#: management/kmpropgeneral.cpp:37 -msgid "Printer name:" -msgstr "Ime pisača:" +#: lpd/lpdtools.cpp:329 +msgid "Pages per sheet" +msgstr "Stranica po listu" -#: management/kmwsmb.cpp:35 -msgid "SMB Printer Settings" -msgstr "Postavke dijeljenog (SMB) pisača" +#: lpd/lpdtools.cpp:345 +msgid "Left/right margin (1/72 in)" +msgstr "Lijeva/desna margina (1/72 in)" + +#: lpd/lpdtools.cpp:350 +msgid "Top/bottom margin (1/72 in)" +msgstr "Gornja/donja margina (1/72 in)" + +#: lpd/lpdtools.cpp:356 +msgid "Text options" +msgstr "Opcije teksta" -#: management/kmwsmb.cpp:41 -msgid "Scan" -msgstr "Pretraži" +#: lpd/lpdtools.cpp:362 +msgid "Send EOF after job to eject page" +msgstr "Po završetku zadatka pošalji naredbu EOF radi izbacivanja stranice" -#: management/kmwsmb.cpp:42 -msgid "Abort" -msgstr "Prekid" +#: lpd/lpdtools.cpp:370 +msgid "Fix stair-stepping text" +msgstr "Ispravi stepenasti tekst" -#: management/kmwsmb.cpp:44 -msgid "Workgroup:" -msgstr "Radna grupa:" +#: lpd/lpdtools.cpp:382 +msgid "Fast text printing (non-PS printers only)" +msgstr "Brzi ispis teksta (samo za ne-PS pisače)" -#: management/kmwsmb.cpp:45 -msgid "Server:" -msgstr "Poslužitelj:" +#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 +msgid "Printer Configuration" +msgstr "Podešavanje pisača" -#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 -msgid "Empty printer name." -msgstr "Prazno ime pisača." +#: kprinterpropertydialog.cpp:138 +msgid "No configurable options for that printer." +msgstr "Nema podesivih postavki za taj pisač." -#: management/kmwsmb.cpp:99 -#, c-format -msgid "Login: %1" -msgstr "Prijava: %1" +#: droptionview.cpp:61 +msgid "Value:" +msgstr "Vrijednost:" -#: management/kmwsmb.cpp:99 -msgid "If you enable this option, you can print posters of different sizes The " +"printout will happen in the form 'tiles' printed on smaller paper " +"sizes, which you can stitch together later. If you enable this option " +"here, the 'Poster Printing' filter will be auto-loaded in the " +"'Filters' tab of this dialog.
" +"This tab is only visible if the external 'poster' " +"utility is discovered by TDEPrint on your system. ['poster' " +"is a commandline utility that enables you to convert PostScript files into " +"tiled printouts which allow for oversized appearance of the stitched-together " +"tiles.]
" +"Note: The standard version of 'poster' will not work. Your system " +"must use a patched version of 'poster'. Ask your operating system vendor to " +"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " +"your selections: it also lets you interactively select the tile(s) you want to " +"print.
" +"Hints " +"
Note 2: By default no tile is selected. Before you can print (a part " +" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" +"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " +"as 16 sheets of A4, or '84cm x 118.2cm'.] " +"Notice, how the little preview window below changes with your change " +"of poster size. It indicates to you how many tiles need to be printed to make " +"the poster, given the selected paper size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " +"select a different paper size for your poster tiles, go to the 'General' tab " +"of this dialog and select one from the dropdown list.
" +"Available sizes are most standard paper sizes supported by your printer. Your " +"printer's supported paper sizes are read from the printer driver info (as laid " +"down in the 'PPD', the printer description file). " +"Be aware that the 'Paper Size' selected may not be supported by 'poster' " +"(example: 'HalfLetter') while it may well be supported by your printer. " +"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " +"or 'Letter'. " +"Notice, how the little preview window below changes with your change " +"of paper size. It indicates how many tiles need to be printed to make up the " +"poster, given the selected paper and poster size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " +"which will be printed onto each tile of your poster to help you cut the pieces " +"as needed.
" +"Notice, how the little preview window above changes with your change " +"of cut margins. It indicates to you how much space the cut margins will take " +"away from each tile. " +"
Be aware, that your cut margins need to be equal to or greater than " +"the margins your printer uses. The printer's capabilities are described in the " +"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " +"the order for their printout.
You can file the field with 2 different " +"methods: " +"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " +"one.
" +"Examples:
" +"\"2,3,7,9,3\" " +"
\"1-3,6,8-11\"
\"General\"
" -"This dialog page contains general print job settings. General " -"settings are applicable to most printers, most jobs and most job file types. " -"
To get more specific help, enable the \"WhatsThis\" cursor and click on any " -"of the text labels or GUI elements of this dialog.
Page size: Select paper size to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o PageSize=... # examples: \"A4\" or \"Letter\"" -"
Paper type: Select paper type to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " -"from the drop-down menu. " -"
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " -"
Image Orientation: Orientation of the printed page image on your " -"paper is controlled by the radio buttons. By default, the orientation is " -"Portrait " -"
You can select 4 alternatives: " -"
Top Margin
. " +"This spinbox/text edit field lets you control the top margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror..
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o orientation-requested=... # examples: \"landscape\" or " -"\"reverse-portrait\"
-o page-top=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:192 +#: marginwidget.cpp:57 msgid "" "
Duplex Printing: These controls may be grayed out if your printer " -"does not support duplex printing (i.e. printing on both sides of the " -"sheet). These controls are active if your printer supports duplex printing. " -"
You can choose from 3 alternatives:
" -"Bottom Margin
. " +"This spinbox/text edit field lets you control the bottom margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " +"Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:218 +#: marginwidget.cpp:76 msgid "" "
Banner Page(s): Select banner(s) to print one or two special sheets " -"of paper just before or after your main job.
" -"Banners may contain some pieces of job information, such as user name, time " -"of printing, job title and more.
" -"Banner pages are useful to separate different jobs more easily, especially " -"in a multi-user environment.
" -"Hint: You can design your own banner pages. To make use of " -"them, just put the banner file into the standard CUPS banners " -"directory (This is usually \"/usr/share/cups/banner/\" " -"Your custom banner(s) must have one of the supported printable formats. " -"Supported formats are ASCII text, PostScript, PDF and nearly any image format " -"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " -"menu after a restart of CUPS.
" -"CUPS comes with a selection of banner pages.
" +"Left Margin
. " +"This spinbox/text edit field lets you control the left margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " -"
-o page-left=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:240 +#: marginwidget.cpp:95 msgid "" "
Pages per Sheet: You can choose to print more than one page onto " -"each sheet of paper. This is sometimes useful to save paper.
" -"Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. Be aware, that some printers can " -"by themselves print multiple pages per sheet. In this case you find the option " -"in the printer driver settings. Be careful: if you enable multiple pages per " -"sheet in both places, your printout will not look as you intended.
" +"Right Margin
. " +"This spinbox/text edit field lets you control the right margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o number-up=... # examples: \"2\" or \"4\"
-o page-right=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpqtpage.cpp:79 +#: marginwidget.cpp:114 msgid "" -"
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
Change Measurement Unit
. " +"You can change the units of measurement for the page margins here. Select " +"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. " -"
Note 3, regarding \"Other\": You cannot really select Other " -"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " -"information purposes only. " -"
To select 8, 9, 16 or other numbers of pages per sheet: "
+" Custom Margins Checkbox Enable this checkbox if you want to modify the margins of your printouts "
+" You can change margin settings in 4 ways: "
" "
-"
You can select 2 alternatives: " -"
\"Drag-your-Margins\"
. " +"Use your mouse to drag and set each margin on this little preview window. " +"
If you enable this option, you can print posters of different sizes The " -"printout will happen in the form 'tiles' printed on smaller paper " -"sizes, which you can stitch together later. If you enable this option " -"here, the 'Poster Printing' filter will be auto-loaded in the " -"'Filters' tab of this dialog.
" -"This tab is only visible if the external 'poster' " -"utility is discovered by TDEPrint on your system. ['poster' " -"is a commandline utility that enables you to convert PostScript files into " -"tiled printouts which allow for oversized appearance of the stitched-together " -"tiles.]
" -"Note: The standard version of 'poster' will not work. Your system " -"must use a patched version of 'poster'. Ask your operating system vendor to " -"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " -"your selections: it also lets you interactively select the tile(s) you want to " -"print.
" -"Hints " -"
Note 2: By default no tile is selected. Before you can print (a part " -" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" -"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " -"as 16 sheets of A4, or '84cm x 118.2cm'.] " -"Notice, how the little preview window below changes with your change " -"of poster size. It indicates to you how many tiles need to be printed to make " -"the poster, given the selected paper size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " -"select a different paper size for your poster tiles, go to the 'General' tab " -"of this dialog and select one from the dropdown list.
" -"Available sizes are most standard paper sizes supported by your printer. Your " -"printer's supported paper sizes are read from the printer driver info (as laid " -"down in the 'PPD', the printer description file). " -"Be aware that the 'Paper Size' selected may not be supported by 'poster' " -"(example: 'HalfLetter') while it may well be supported by your printer. " -"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " -"or 'Letter'. " -"Notice, how the little preview window below changes with your change " -"of paper size. It indicates how many tiles need to be printed to make up the " -"poster, given the selected paper and poster size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " -"which will be printed onto each tile of your poster to help you cut the pieces " -"as needed.
" -"Notice, how the little preview window above changes with your change " -"of cut margins. It indicates to you how much space the cut margins will take " -"away from each tile. " -"
Be aware, that your cut margins need to be equal to or greater than " -"the margins your printer uses. The printer's capabilities are described in the " -"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " -"the order for their printout.
You can file the field with 2 different " -"methods: " -"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " -"one.
" -"Examples:
" -"\"2,3,7,9,3\" " -"
\"1-3,6,8-11\"
The upper pane of this dialog page contains all printjob options as laid " -"down in the printer's description file (PostScript Printer Description == " -"'PPD')
" -"Click on any item in the list and watch the lower pane of this dialog page " -"display the available values.
" -"Set the values as needed. Then use one of the pushbuttons below to " -"proceed:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
The lower pane of this dialog page contains all possible values of the " -"printoption highlighted above, as laid down in the printer's description file " -"(PostScript Printer Description == 'PPD')
" -"Select the value you want and proceed.
" -"Then use one of the pushbuttons below to leave this dialog:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This combo box shows (and lets you select) a print subsystem to be used by " -"TDEPrint. (This print subsystem must, of course, be installed inside your " -"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " -"itself upon first startup. Most Linux distributions have \"CUPS\", the " -"Common UNIX Printing System.
This line shows which CUPS server your PC is currently connected to for " -"printing and retrieving printer info. To switch to a different CUPS server, " -"click \"System Options\", then select \"Cups server\" and fill in the required " -"info.
This button calls a little dialog to let you select a filter here.
" -"Note 1: You can chain different filters as long as you make sure " -"that the output of one fits as input of the next. (TDEPrint checks your " -"filtering chain and will warn you if you fail to do so.
" -"Note 2: The filters you define here are applied to your jobfile " -"before it is handed downstream to your spooler and print subsystem " -"(e.g. CUPS, LPRng, LPD).
The upper pane of this dialog page contains all printjob options as laid " +"down in the printer's description file (PostScript Printer Description == " +"'PPD')
" +"Click on any item in the list and watch the lower pane of this dialog page " +"display the available values.
" +"Set the values as needed. Then use one of the pushbuttons below to " +"proceed:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This button removes the highlighted filter from the list of filters.
The lower pane of this dialog page contains all possible values of the " +"printoption highlighted above, as laid down in the printer's description file " +"(PostScript Printer Description == 'PPD')
" +"Select the value you want and proceed.
" +"Then use one of the pushbuttons below to leave this dialog:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This button moves the highlighted filter up in the list of filters, towards " -"the front of the filtering chain.
This button moves the highlighted filter down in the list of filters, " -"towards the end of the filtering chain..
%2
%2
This button lets you configure the currently highlighted filter. It opens a " -"separate dialog.
This field shows some general info about the selected filter. Amongst them " -"are: " -"
This field shows which filters are currently selected to act as " -"'pre-filters' for TDEPrint. Pre-filters are processing the print files " -"before they are send downstream to your real print subsystem.
" -"The list shown in this field may be empty (default).
" -"The pre-filters act on the printjob in the order they are listed (from top " -"to bottom). This is done by acting as a filtering chain " -"where the output of one filter acts as input to the next. By putting the " -"filters into the wrong order, you can make the filtering chain fail. For " -"example: if your file is ASCII text, and you want the output being processed " -"by the 'Multipage per Sheet' filter, the first filter must be one that " -"processes ASCII into PostScript.
" -"TDEPrint can utilize any external filtering program which you may " -"find useful through this interface.
" -"TDEPrint ships preconfigured with support for a selection of common filters. " -"These filters however need to be installed independently from TDEPrint. These " -"pre-filters work for all print subsystems supported by TDEPrint (such " -"as CUPS, LPRng and LPD), because they are not depending on these.
." -"Amongst the pre-configured filters shipping with TDEPrint are:
" -"Please click on the other elements of this dialog to learn more about the " -"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " -"supported by its follower. See Filters tab for more information.
" -msgstr "" +#: tdeprintd.cpp:263 +msgid "Printing system" +msgstr "Sustav ispisa" -#: kpfilterpage.cpp:408 -msgid "Input" -msgstr "Ulaz" +#: tdeprintd.cpp:266 +msgid "Authentication failed (user name=%1)" +msgstr "Autentikacija nije uspjela (korisničko ime=%1)" #~ msgid "%1 &Handbook" #~ msgstr "%1 &Priručnik" -- cgit v1.2.1