From f7e7a923aca8be643f9ae6f7252f9fb27b3d2c3b Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sat, 3 Dec 2011 11:05:10 -0600 Subject: Second part of prior commit --- tde-i18n-sr@Latn/messages/tdebase/ksysguard.po | 1726 ++++++++++++++++++++++++ 1 file changed, 1726 insertions(+) create mode 100644 tde-i18n-sr@Latn/messages/tdebase/ksysguard.po (limited to 'tde-i18n-sr@Latn/messages/tdebase/ksysguard.po') diff --git a/tde-i18n-sr@Latn/messages/tdebase/ksysguard.po b/tde-i18n-sr@Latn/messages/tdebase/ksysguard.po new file mode 100644 index 00000000000..0dd2e078498 --- /dev/null +++ b/tde-i18n-sr@Latn/messages/tdebase/ksysguard.po @@ -0,0 +1,1726 @@ +# translation of ksysguard.po to Serbian +# KTranslator Generated File +# Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. +# +# +# Ljubisa Radivojevic , 2000. +# Toplica Tanaskovic , 2003. +# Toplica Tanaskovic , 2003. +# Chusslove Illich , 2004, 2005, 2006, 2007. +msgid "" +msgstr "" +"Project-Id-Version: ksysguard\n" +"POT-Creation-Date: 2008-07-08 01:18+0200\n" +"PO-Revision-Date: 2007-01-06 22:38+0100\n" +"Last-Translator: Chusslove Illich \n" +"Language-Team: Serbian \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" + +#: KSysGuardApplet.cc:318 WorkSheet.cc:94 +#, c-format +msgid "Cannot open the file %1." +msgstr "Ne mogu da otvorim fajl %1." + +#: KSysGuardApplet.cc:327 WorkSheet.cc:102 +msgid "The file %1 does not contain valid XML." +msgstr "Fajl %1 ne sadrži ispravan XML." + +#: WorkSheet.cc:109 +msgid "" +"The file %1 does not contain a valid worksheet definition, which must have a " +"document type 'KSysGuardWorkSheet'." +msgstr "" +"Fajl %1 ne sadrži ispravnu definiciju radnog lista, koja mora imati definisanu " +"vrstu dokumenta „KSysGuardWorkSheet“." + +#: WorkSheet.cc:125 +msgid "The file %1 has an invalid worksheet size." +msgstr "Fajl %1 ima neispravnu veličinu radnog lista." + +#: KSysGuardApplet.cc:476 WorkSheet.cc:225 +#, c-format +msgid "Cannot save file %1" +msgstr "Ne mogu da snimim fajl %1" + +#: WorkSheet.cc:273 +msgid "The clipboard does not contain a valid display description." +msgstr "Klipbord ne sadrži ispravan opis prikaza." + +#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315 +msgid "It is impossible to connect to '%1'." +msgstr "Nemoguće je povezati se na „%1“." + +#: KSysGuardApplet.cc:209 WorkSheet.cc:331 +msgid "Select Display Type" +msgstr "Izaberite vrstu prikaza" + +#: KSysGuardApplet.cc:210 WorkSheet.cc:332 +msgid "&Signal Plotter" +msgstr "Crtač &signala" + +#: KSysGuardApplet.cc:211 WorkSheet.cc:333 +msgid "&Multimeter" +msgstr "&Multimetar" + +#: WorkSheet.cc:334 +msgid "&BarGraph" +msgstr "&Trakasti grafikon" + +#: WorkSheet.cc:335 +msgid "S&ensorLogger" +msgstr "Zapisivač dn&evnika senzora" + +#: ksgrd/SensorAgent.cc:88 +msgid "" +"Message from %1:\n" +"%2" +msgstr "" +"Poruka od %1:\n" +"%2" + +#: ksgrd/TimerSettings.cc:36 +msgid "Timer Settings" +msgstr "Podešavanja tajmera" + +#: ksgrd/TimerSettings.cc:43 +msgid "Use update interval of worksheet" +msgstr "Koristi interval ažuriranja radnog lista" + +#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46 +msgid "Update interval:" +msgstr "Interval ažuriranja:" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68 +#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51 +#: rc.cpp:21 +#, no-c-format +msgid " sec" +msgstr " sek." + +#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54 +msgid "All displays of the sheet are updated at the rate specified here." +msgstr "Svi prikazi lista se ažuriraju prema veličini koju navedete ovde." + +#: ksgrd/HostConnector.cc:37 +msgid "Connect Host" +msgstr "Domaćin za povezivanje" + +#: ksgrd/HostConnector.cc:44 +msgid "Host:" +msgstr "Domaćin:" + +#: ksgrd/HostConnector.cc:54 +msgid "Enter the name of the host you want to connect to." +msgstr "Unesite ime domaćina na koji želite da se povežete." + +#: ksgrd/HostConnector.cc:61 +msgid "Connection Type" +msgstr "Vrsta veze" + +#: ksgrd/HostConnector.cc:66 +msgid "ssh" +msgstr "ssh" + +#: ksgrd/HostConnector.cc:69 +msgid "Select this to use the secure shell to login to the remote host." +msgstr "" +"Odaberite ovo da biste koristili sigurnu školjku (ssh) za prijavljivanje na " +"udaljeni domaćin." + +#: ksgrd/HostConnector.cc:72 +msgid "rsh" +msgstr "rsh" + +#: ksgrd/HostConnector.cc:73 +msgid "Select this to use the remote shell to login to the remote host." +msgstr "" +"Izaberite ovo da biste koristili udaljenu ljusku da se prijavite na udaljeni " +"domaćin." + +#: ksgrd/HostConnector.cc:76 +msgid "Daemon" +msgstr "Demon" + +#: ksgrd/HostConnector.cc:77 +msgid "" +"Select this if you want to connect to a ksysguard daemon that is running on the " +"machine you want to connect to, and is listening for client requests." +msgstr "" +"Odaberite ovo ako želite da se povežete sa ksysguard demonom koji se izvršava " +"na mašini na koju želite da se povežete, i koji očekuje zahteve klijenata." + +#: ksgrd/HostConnector.cc:80 +msgid "Custom command" +msgstr "Prilagođena naredba" + +#: ksgrd/HostConnector.cc:81 +msgid "" +"Select this to use the command you entered below to start ksysguardd on the " +"remote host." +msgstr "" +"Izaberite ovo da biste koristili dole unešenu naredbu da pokrenete ksysguardd " +"na udaljenom domaćinu." + +#: ksgrd/HostConnector.cc:84 +msgid "Port:" +msgstr "Port:" + +#: ksgrd/HostConnector.cc:90 +msgid "" +"Enter the port number on which the ksysguard daemon is listening for " +"connections." +msgstr "Unesite broj porta na kome ksysguard demon sluša za vezama." + +#: ksgrd/HostConnector.cc:93 +msgid "e.g. 3112" +msgstr "npr. 3112" + +#: ksgrd/HostConnector.cc:96 +msgid "Command:" +msgstr "Naredba:" + +#: ksgrd/HostConnector.cc:105 +msgid "Enter the command that runs ksysguardd on the host you want to monitor." +msgstr "" +"Unesite naredbu koja pokreće ksysguardd na domaćinu koji želite da nadzirete." + +#: ksgrd/HostConnector.cc:109 +msgid "e.g. ssh -l root remote.host.org ksysguardd" +msgstr "npr. ssh -l root udaljeni.host.org ksysguardd" + +#: ksgrd/StyleSettings.cc:41 +msgid "Global Style Settings" +msgstr "Globalne postavke stila" + +#: ksgrd/StyleSettings.cc:44 +msgid "Display Style" +msgstr "Stil prikaza" + +#: ksgrd/StyleSettings.cc:47 +msgid "First foreground color:" +msgstr "Prva boja ispisa:" + +#: ksgrd/StyleSettings.cc:54 +msgid "Second foreground color:" +msgstr "Druga boja ispisa:" + +#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107 +#: ksgrd/StyleSettings.cc:61 rc.cpp:126 +#, no-c-format +msgid "Alarm color:" +msgstr "Alarmna boja:" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241 +#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90 +#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144 +#, no-c-format +msgid "Background color:" +msgstr "Boja pozadine:" + +#: SensorDisplayLib/DancingBarsSettings.cc:150 +#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75 +msgid "Font size:" +msgstr "Veličina fonta:" + +#: ksgrd/StyleSettings.cc:85 +msgid "Sensor Colors" +msgstr "Boje senzora" + +#: ksgrd/StyleSettings.cc:91 +msgid "Change Color..." +msgstr "Promeni boju..." + +#: ksgrd/StyleSettings.cc:166 +#, c-format +msgid "Color %1" +msgstr "Boja %1" + +#. i18n: file SystemLoad.sgrd line 5 +#: ksgrd/SensorManager.cc:50 rc.cpp:173 +msgid "CPU Load" +msgstr "Opterećenje procesora" + +#: ksgrd/SensorManager.cc:51 +msgid "Idle Load" +msgstr "Opterećenje nezauzetih procesa" + +#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52 +#: ksysguard.cc:171 +msgid "System Load" +msgstr "Sistemsko opterećenje" + +#: ksgrd/SensorManager.cc:53 +msgid "Nice Load" +msgstr "Opterećenje finih procesa" + +#: ksgrd/SensorManager.cc:54 +msgid "User Load" +msgstr "Korisničko opterećenje" + +#: ksgrd/SensorManager.cc:55 +msgid "Memory" +msgstr "Memorija" + +#. i18n: file SystemLoad.sgrd line 13 +#: ksgrd/SensorManager.cc:56 rc.cpp:177 +msgid "Physical Memory" +msgstr "Fizička memorija" + +#. i18n: file SystemLoad.sgrd line 21 +#: ksgrd/SensorManager.cc:57 rc.cpp:179 +msgid "Swap Memory" +msgstr "Virtuelna memorija" + +#: ksgrd/SensorManager.cc:58 +msgid "Cached Memory" +msgstr "Keširana memorija" + +#: ksgrd/SensorManager.cc:59 +msgid "Buffered Memory" +msgstr "Baferisana memorija" + +#: ksgrd/SensorManager.cc:60 +msgid "Used Memory" +msgstr "Zauzeta memorija" + +#: ksgrd/SensorManager.cc:61 +msgid "Application Memory" +msgstr "Memorija programa" + +#: ksgrd/SensorManager.cc:62 +msgid "Free Memory" +msgstr "Slobodna memorija" + +#: ksgrd/SensorManager.cc:63 +msgid "Process Count" +msgstr "Broj procesa" + +#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148 +msgid "Process Controller" +msgstr "Kontroler procesa" + +#: ksgrd/SensorManager.cc:65 +msgid "Disk Throughput" +msgstr "Propusni opseg diska" + +#: ksgrd/SensorManager.cc:66 +msgid "" +"_: CPU Load\n" +"Load" +msgstr "Opterećenje" + +#: ksgrd/SensorManager.cc:67 +msgid "Total Accesses" +msgstr "Ukupno pristupâ" + +#: ksgrd/SensorManager.cc:68 +msgid "Read Accesses" +msgstr "Pristupi čitanja" + +#: ksgrd/SensorManager.cc:69 +msgid "Write Accesses" +msgstr "Pristupi pisanja" + +#: ksgrd/SensorManager.cc:70 +msgid "Read Data" +msgstr "Učitano podataka" + +#: ksgrd/SensorManager.cc:71 +msgid "Write Data" +msgstr "Zapisano podataka" + +#: ksgrd/SensorManager.cc:72 +msgid "Pages In" +msgstr "Ušlih stranica" + +#: ksgrd/SensorManager.cc:73 +msgid "Pages Out" +msgstr "Izašlih stranica" + +#: ksgrd/SensorManager.cc:74 +msgid "Context Switches" +msgstr "Zamena konteksta" + +#: ksgrd/SensorManager.cc:75 +msgid "Network" +msgstr "Mreža" + +#: ksgrd/SensorManager.cc:76 +msgid "Interfaces" +msgstr "Interfejsi" + +#: ksgrd/SensorManager.cc:77 +msgid "Receiver" +msgstr "Prijemnik" + +#: ksgrd/SensorManager.cc:78 +msgid "Transmitter" +msgstr "Odašiljač" + +#: ksgrd/SensorManager.cc:79 +msgid "Data" +msgstr "Podaci" + +#: ksgrd/SensorManager.cc:80 +msgid "Compressed Packets" +msgstr "Kompresovani paketi" + +#: ksgrd/SensorManager.cc:81 +msgid "Dropped Packets" +msgstr "Ispušteni paketi" + +#: ksgrd/SensorManager.cc:82 +msgid "Errors" +msgstr "Greške" + +#: ksgrd/SensorManager.cc:83 +msgid "FIFO Overruns" +msgstr "FIFO prepunjavanja" + +#: ksgrd/SensorManager.cc:84 +msgid "Frame Errors" +msgstr "Greške okvira" + +#: ksgrd/SensorManager.cc:85 +msgid "Multicast" +msgstr "Višestruki prenos" + +#: ksgrd/SensorManager.cc:86 +msgid "Packets" +msgstr "Paketi" + +#: ksgrd/SensorManager.cc:87 +msgid "Carrier" +msgstr "Nosilac" + +#: ksgrd/SensorManager.cc:88 +msgid "Collisions" +msgstr "Sudari" + +#: ksgrd/SensorManager.cc:89 +msgid "Sockets" +msgstr "Soketi" + +#: ksgrd/SensorManager.cc:90 +msgid "Total Number" +msgstr "Ukupan broj" + +#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149 +msgid "Table" +msgstr "Tabela" + +#: ksgrd/SensorManager.cc:92 +msgid "Advanced Power Management" +msgstr "Napredno upravljanje energijom (APM)" + +#: ksgrd/SensorManager.cc:93 +msgid "ACPI" +msgstr "ACPI" + +#: ksgrd/SensorManager.cc:94 +msgid "Thermal Zone" +msgstr "Termalna zona" + +#: ksgrd/SensorManager.cc:95 +msgid "Temperature" +msgstr "Temperatura" + +#: ksgrd/SensorManager.cc:96 +msgid "Fan" +msgstr "Ventilator" + +#: ksgrd/SensorManager.cc:97 +msgid "State" +msgstr "Stanje" + +#: ksgrd/SensorManager.cc:98 +msgid "Battery" +msgstr "Baterija" + +#: ksgrd/SensorManager.cc:99 +msgid "Battery Charge" +msgstr "Popunjenost baterija" + +#: ksgrd/SensorManager.cc:100 +msgid "Battery Usage" +msgstr "Iskorišćenost baterija" + +#: ksgrd/SensorManager.cc:101 +msgid "Remaining Time" +msgstr "Preostalo vreme" + +#: ksgrd/SensorManager.cc:102 +msgid "Interrupts" +msgstr "Prekidi" + +#. i18n: file SystemLoad.sgrd line 10 +#: ksgrd/SensorManager.cc:103 rc.cpp:175 +msgid "Load Average (1 min)" +msgstr "Prosečno opterećenje (1 minut)" + +#: ksgrd/SensorManager.cc:104 +msgid "Load Average (5 min)" +msgstr "Prosečno opterećenje (5 minuta)" + +#: ksgrd/SensorManager.cc:105 +msgid "Load Average (15 min)" +msgstr "Prosečno opterećenje (15 minuta)" + +#: ksgrd/SensorManager.cc:106 +msgid "Clock Frequency" +msgstr "Učestanost časovnika" + +#: ksgrd/SensorManager.cc:107 +msgid "Hardware Sensors" +msgstr "Hardverski senzori" + +#: ksgrd/SensorManager.cc:108 +msgid "Partition Usage" +msgstr "Iskorišćenost particija" + +#: ksgrd/SensorManager.cc:109 +msgid "Used Space" +msgstr "Iskorišćen prostor" + +#: ksgrd/SensorManager.cc:110 +msgid "Free Space" +msgstr "Slobodan prostor" + +#: ksgrd/SensorManager.cc:111 +msgid "Fill Level" +msgstr "Nivo popunjavanja" + +#: ksgrd/SensorManager.cc:115 +#, c-format +msgid "CPU%1" +msgstr "CPU%1" + +#: ksgrd/SensorManager.cc:117 +#, c-format +msgid "Disk%1" +msgstr "Disk%1" + +#: ksgrd/SensorManager.cc:122 +#, c-format +msgid "Fan%1" +msgstr "Ventilator%1" + +#: ksgrd/SensorManager.cc:124 +#, c-format +msgid "Temperature%1" +msgstr "Temperatura%1" + +#: ksgrd/SensorManager.cc:127 +msgid "Total" +msgstr "Ukupno" + +#: ksgrd/SensorManager.cc:133 +#, c-format +msgid "Int%1" +msgstr "Prekid%1" + +#: ksgrd/SensorManager.cc:140 +msgid "" +"_: the unit 1 per second\n" +"1/s" +msgstr "1/s" + +#: ksgrd/SensorManager.cc:141 +msgid "kBytes" +msgstr "kB" + +#: ksgrd/SensorManager.cc:142 +msgid "" +"_: the unit minutes\n" +"min" +msgstr "min." + +#: ksgrd/SensorManager.cc:143 +msgid "" +"_: the frequency unit\n" +"MHz" +msgstr "MHz" + +#: ksgrd/SensorManager.cc:146 +msgid "Integer Value" +msgstr "Celobrojna vrednost" + +#: ksgrd/SensorManager.cc:147 +msgid "Floating Point Value" +msgstr "Vrednost u pokretnom zarezu" + +#: ksgrd/SensorManager.cc:289 +msgid "Connection to %1 has been lost." +msgstr "Veza sa %1 je izgubljena." + +#: ksgrd/SensorSocketAgent.cc:104 +msgid "Connection to %1 refused" +msgstr "Veza sa %1 je odbijena" + +#: ksgrd/SensorSocketAgent.cc:108 +msgid "Host %1 not found" +msgstr "Domaćin %1 nije pronađen" + +#: ksgrd/SensorSocketAgent.cc:112 +#, c-format +msgid "Timeout at host %1" +msgstr "Vreme isticanja kod domaćina %1" + +#: ksgrd/SensorSocketAgent.cc:116 +#, c-format +msgid "Network failure host %1" +msgstr "Mrežni krah domaćin %1" + +#: _translatorinfo.cpp:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Aleksandar Dezelin,Toplica Tanasković" + +#: _translatorinfo.cpp:3 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "deza@milnet.co.yu,toptan@kde.org.yu" + +#: Workspace.cc:53 +msgid "" +"This is your work space. It holds your worksheets. You need to create a new " +"worksheet (Menu File->New) before you can drag sensors here." +msgstr "" +"Ovo je vaš radni prostor. On sadrži radne listove. Morate napraviti novi radni " +"list (meni Fajl -> Novi) pre nego što ovde dovučete senzore." + +#: Workspace.cc:105 ksysguard.cc:176 +msgid "Process Table" +msgstr "Tabela procesa" + +#: Workspace.cc:135 +#, c-format +msgid "Sheet %1" +msgstr "List %1" + +#: Workspace.cc:165 Workspace.cc:305 +msgid "" +"The worksheet '%1' contains unsaved data.\n" +"Do you want to save the worksheet?" +msgstr "" +"Radni list „%1“ sadrži nesnimljene podatke\n" +"Želite li da snimite radni list?" + +#: Workspace.cc:181 Workspace.cc:235 +msgid "*.sgrd|Sensor Files" +msgstr "*.sgrd|Senzorski fajlovi" + +#: Workspace.cc:184 +msgid "Select Worksheet to Load" +msgstr "Izaberite radni list za učitavanje" + +#: Workspace.cc:229 Workspace.cc:269 +msgid "You do not have a worksheet that could be saved." +msgstr "Ne posedujete radni list koji može biti snimljen." + +#: Workspace.cc:239 +msgid "Save Current Worksheet As" +msgstr "Snimi tekući radni list kao" + +#: Workspace.cc:320 +msgid "There are no worksheets that could be deleted." +msgstr "Ne postoje radni listovi koji mogu biti obrisani." + +#: Workspace.cc:448 +msgid "Cannot find file ProcessTable.sgrd." +msgstr "Ne mogu da nađem fajl „ProcessTable.sgrd“." + +#: KSGAppletSettings.cc:34 +msgid "System Guard Settings" +msgstr "Podešavanja Zaštite sistema" + +#: KSGAppletSettings.cc:42 +msgid "Number of displays:" +msgstr "Broj prikaza:" + +#: KSGAppletSettings.cc:50 +msgid "Size ratio:" +msgstr "Odnos veličina:" + +#: KSGAppletSettings.cc:54 +#, c-format +msgid "%" +msgstr "%" + +#: SensorDisplayLib/ProcessList.cc:110 +msgid "" +"_: process status\n" +"running" +msgstr "pokrenut" + +#: SensorDisplayLib/ProcessList.cc:112 +msgid "" +"_: process status\n" +"sleeping" +msgstr "uspavan" + +#: SensorDisplayLib/ProcessList.cc:114 +msgid "" +"_: process status\n" +"disk sleep" +msgstr "uspavan na disk" + +#: SensorDisplayLib/ProcessList.cc:115 +msgid "" +"_: process status\n" +"zombie" +msgstr "zombi" + +#: SensorDisplayLib/ProcessList.cc:117 +msgid "" +"_: process status\n" +"stopped" +msgstr "zaustavljen" + +#: SensorDisplayLib/ProcessList.cc:118 +msgid "" +"_: process status\n" +"paging" +msgstr "upisivanje stranica" + +#: SensorDisplayLib/ProcessList.cc:119 +msgid "" +"_: process status\n" +"idle" +msgstr "neaktivan" + +#: SensorDisplayLib/ProcessList.cc:250 +msgid "Remove Column" +msgstr "Ukloni kolonu" + +#: SensorDisplayLib/ProcessList.cc:251 +msgid "Add Column" +msgstr "Dodaj kolonu" + +#: SensorDisplayLib/ProcessList.cc:252 +msgid "Help on Column" +msgstr "Pomoć oko kolone" + +#: SensorDisplayLib/ProcessController.cc:62 +#: SensorDisplayLib/ProcessList.cc:771 +msgid "Nice" +msgstr "Fin" + +#: SensorDisplayLib/ProcessList.cc:776 +msgid "Hide Column" +msgstr "Sakrij kolonu" + +#: SensorDisplayLib/ProcessList.cc:782 +msgid "Show Column" +msgstr "Prikaži kolonu" + +#: SensorDisplayLib/ProcessList.cc:786 +msgid "Select All Processes" +msgstr "Odaberi sve procese" + +#: SensorDisplayLib/ProcessList.cc:787 +msgid "Unselect All Processes" +msgstr "Poništi izbor za sve procese" + +#: SensorDisplayLib/ProcessList.cc:793 +msgid "Select All Child Processes" +msgstr "Odaberi sve dečje procese" + +#: SensorDisplayLib/ProcessList.cc:794 +msgid "Unselect All Child Processes" +msgstr "Poništi izbor svih dečjih procesa" + +#: SensorDisplayLib/ProcessList.cc:796 +msgid "SIGABRT" +msgstr "SIGABRT" + +#: SensorDisplayLib/ProcessList.cc:797 +msgid "SIGALRM" +msgstr "SIGALRM" + +#: SensorDisplayLib/ProcessList.cc:798 +msgid "SIGCHLD" +msgstr "SIGCHLD" + +#: SensorDisplayLib/ProcessList.cc:799 +msgid "SIGCONT" +msgstr "SIGCONT" + +#: SensorDisplayLib/ProcessList.cc:800 +msgid "SIGFPE" +msgstr "SIGFPE" + +#: SensorDisplayLib/ProcessList.cc:801 +msgid "SIGHUP" +msgstr "SIGHUP" + +#: SensorDisplayLib/ProcessList.cc:802 +msgid "SIGILL" +msgstr "SIGILL" + +#: SensorDisplayLib/ProcessList.cc:803 +msgid "SIGINT" +msgstr "SIGINT" + +#: SensorDisplayLib/ProcessList.cc:804 +msgid "SIGKILL" +msgstr "SIGKILL" + +#: SensorDisplayLib/ProcessList.cc:805 +msgid "SIGPIPE" +msgstr "SIGPIPE" + +#: SensorDisplayLib/ProcessList.cc:806 +msgid "SIGQUIT" +msgstr "SIGQUIT" + +#: SensorDisplayLib/ProcessList.cc:807 +msgid "SIGSEGV" +msgstr "SIGSEGV" + +#: SensorDisplayLib/ProcessList.cc:808 +msgid "SIGSTOP" +msgstr "SIGSTOP" + +#: SensorDisplayLib/ProcessList.cc:809 +msgid "SIGTERM" +msgstr "SIGTERM" + +#: SensorDisplayLib/ProcessList.cc:810 +msgid "SIGTSTP" +msgstr "SIGTSTP" + +#: SensorDisplayLib/ProcessList.cc:811 +msgid "SIGTTIN" +msgstr "SIGTTIN" + +#: SensorDisplayLib/ProcessList.cc:812 +msgid "SIGTTOU" +msgstr "SIGTTOU" + +#: SensorDisplayLib/ProcessList.cc:813 +msgid "SIGUSR1" +msgstr "SIGUSR1" + +#: SensorDisplayLib/ProcessList.cc:814 +msgid "SIGUSR2" +msgstr "SIGUSR2" + +#: SensorDisplayLib/ProcessList.cc:817 +msgid "Send Signal" +msgstr "Pošalji signal" + +#: SensorDisplayLib/ProcessList.cc:825 +msgid "Renice Process..." +msgstr "Ponovo uskladi proces..." + +#: SensorDisplayLib/ProcessList.cc:873 +msgid "" +"_n: Do you really want to send signal %1 to the selected process?\n" +"Do you really want to send signal %1 to the %n selected processes?" +msgstr "" +"Da li stvarno želite da pošaljete signal %1 odabranom %n procesu?\n" +"Da li stvarno želite da pošaljete signal %1 odabranim %n procesa?\n" +"Da li stvarno želite da pošaljete signal %1 odabranim %n procesa?" + +#: SensorDisplayLib/ProcessList.cc:877 +msgid "Send" +msgstr "Pošalji" + +#: SensorDisplayLib/DancingBarsSettings.cc:43 +msgid "Edit BarGraph Preferences" +msgstr "Izmenite podešavanja trakastog grafikona" + +#: SensorDisplayLib/DancingBarsSettings.cc:47 +msgid "Range" +msgstr "Opseg" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25 +#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48 +#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135 +#, no-c-format +msgid "Title" +msgstr "Naslov" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36 +#: SensorDisplayLib/DancingBarsSettings.cc:54 +#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51 +#, no-c-format +msgid "Enter the title of the display here." +msgstr "Ovde unesite naslov prikaza." + +#: SensorDisplayLib/DancingBarsSettings.cc:59 +msgid "Display Range" +msgstr "Opseg prikaza" + +#: SensorDisplayLib/DancingBarsSettings.cc:63 +#: SensorDisplayLib/FancyPlotterSettings.cc:89 +msgid "Minimum value:" +msgstr "Najmanja vrednost:" + +#: SensorDisplayLib/DancingBarsSettings.cc:67 +#: SensorDisplayLib/FancyPlotterSettings.cc:95 +msgid "" +"Enter the minimum value for the display here. If both values are 0, automatic " +"range detection is enabled." +msgstr "" +"Ovde unesite minimalnu vrednost prikaza. Ako su obe vrednosti 0 aktiviraće se " +"automatsko utvrđivanje opsega." + +#: SensorDisplayLib/DancingBarsSettings.cc:71 +#: SensorDisplayLib/FancyPlotterSettings.cc:99 +msgid "Maximum value:" +msgstr "Najveća vrednost:" + +#: SensorDisplayLib/DancingBarsSettings.cc:75 +#: SensorDisplayLib/FancyPlotterSettings.cc:105 +msgid "" +"Enter the maximum value for the display here. If both values are 0, automatic " +"range detection is enabled." +msgstr "" +"Ovde unesite maksimalnu vrednost prikaza. Ako su obe vrednosti 0 aktiviraće se " +"automatsko utvrđivanje opsega." + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61 +#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60 +#, no-c-format +msgid "Alarms" +msgstr "Alarmi" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78 +#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75 +#, no-c-format +msgid "Alarm for Minimum Value" +msgstr "Alarm za minimalnu vrednost" + +#: SensorDisplayLib/DancingBarsSettings.cc:91 +#: SensorDisplayLib/DancingBarsSettings.cc:109 +msgid "Enable alarm" +msgstr "Uključi alarm" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92 +#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81 +#, no-c-format +msgid "Enable the minimum value alarm." +msgstr "Uključi alarm minimalne vrednosti." + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120 +#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84 +#, no-c-format +msgid "Lower limit:" +msgstr "Donja granica:" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144 +#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63 +#, no-c-format +msgid "Alarm for Maximum Value" +msgstr "Alarm za maksimalnu vrednost" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158 +#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69 +#, no-c-format +msgid "Enable the maximum value alarm." +msgstr "Uključi alarm maksimalne vrednosti." + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186 +#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72 +#, no-c-format +msgid "Upper limit:" +msgstr "Gornja granica:" + +#: SensorDisplayLib/DancingBarsSettings.cc:126 +msgid "Look" +msgstr "Izgled" + +#: SensorDisplayLib/DancingBarsSettings.cc:129 +msgid "Normal bar color:" +msgstr "Uobičajena boja trake:" + +#: SensorDisplayLib/DancingBarsSettings.cc:136 +msgid "Out-of-range color:" +msgstr "Boja za vrednosti van opsega:" + +#: SensorDisplayLib/DancingBarsSettings.cc:154 +msgid "" +"This determines the size of the font used to print a label underneath the bars. " +"Bars are automatically suppressed if text becomes too large, so it is advisable " +"to use a small font size here." +msgstr "" +"Ovo određuje veličinu fonta koji se koristi za štampanje oznaka ispod traka. " +"Trake se automatski izbacuju ako tekst postane prevelik, tako da je " +"preporučljivo da ovde koristite malu veličinu fonta." + +#: SensorDisplayLib/DancingBarsSettings.cc:161 +#: SensorDisplayLib/FancyPlotterSettings.cc:224 +msgid "Sensors" +msgstr "Senzori" + +#: SensorDisplayLib/DancingBarsSettings.cc:166 +#: SensorDisplayLib/FancyPlotterSettings.cc:231 +msgid "Host" +msgstr "Domaćin" + +#: SensorDisplayLib/DancingBarsSettings.cc:167 +#: SensorDisplayLib/FancyPlotterSettings.cc:232 +msgid "Sensor" +msgstr "Senzor" + +#: SensorDisplayLib/DancingBarsSettings.cc:168 +msgid "Label" +msgstr "Oznaka" + +#: SensorDisplayLib/DancingBarsSettings.cc:169 +#: SensorDisplayLib/FancyPlotterSettings.cc:233 +msgid "Unit" +msgstr "Merna jedinica" + +#: SensorDisplayLib/DancingBarsSettings.cc:170 +#: SensorDisplayLib/FancyPlotterSettings.cc:234 +#: SensorDisplayLib/ProcessController.cc:59 +msgid "Status" +msgstr "Status" + +#: SensorDisplayLib/DancingBarsSettings.cc:174 +msgid "Edit..." +msgstr "Uredi..." + +#: SensorDisplayLib/DancingBarsSettings.cc:176 +msgid "Push this button to configure the label." +msgstr "Pritisnite ovo dugme da podesite oznaku." + +#: SensorDisplayLib/DancingBarsSettings.cc:181 +#: SensorDisplayLib/FancyPlotterSettings.cc:249 +msgid "Push this button to delete the sensor." +msgstr "Pritisnite ovo dugme da uklonite senzor." + +#: SensorDisplayLib/DancingBarsSettings.cc:356 +msgid "Label of Bar Graph" +msgstr "Naziv trakastog grafikona" + +#: SensorDisplayLib/DancingBarsSettings.cc:357 +msgid "Enter new label:" +msgstr "Unesite novu oznaku:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:47 +msgid "Signal Plotter Settings" +msgstr "Podešavanja crtača signala" + +#: SensorDisplayLib/FancyPlotterSettings.cc:57 +msgid "Style" +msgstr "Stil" + +#: SensorDisplayLib/FancyPlotterSettings.cc:60 +msgid "Title:" +msgstr "Naslov:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:69 +msgid "Graph Drawing Style" +msgstr "Stil crtanja grafikona" + +#: SensorDisplayLib/FancyPlotterSettings.cc:71 +msgid "Basic polygons" +msgstr "Osnovni poligoni" + +#: SensorDisplayLib/FancyPlotterSettings.cc:73 +msgid "Original - single line per data point" +msgstr "Originalno — jedna linija po svakoj tački podataka" + +#: SensorDisplayLib/FancyPlotterSettings.cc:78 +msgid "Scales" +msgstr "Razmere" + +#: SensorDisplayLib/FancyPlotterSettings.cc:81 +msgid "Vertical Scale" +msgstr "Uspravna razmera" + +#: SensorDisplayLib/FancyPlotterSettings.cc:85 +msgid "Automatic range detection" +msgstr "Automatsko otkrivanje opsega" + +#: SensorDisplayLib/FancyPlotterSettings.cc:86 +msgid "" +"Check this box if you want the display range to adapt dynamically to the " +"currently displayed values; if you do not check this, you have to specify the " +"range you want in the fields below." +msgstr "" +"Izaberite ovu opciju ako želite da se opseg prikaza dinamički prilagođava " +"trenutno prikazanim vrednostima. Ako ne izaberete ovo, morate navesti opseg " +"koji želite u poljima ispod." + +#: SensorDisplayLib/FancyPlotterSettings.cc:111 +msgid "Horizontal Scale" +msgstr "Vodoravna razmera" + +#: SensorDisplayLib/FancyPlotterSettings.cc:120 +msgid "pixel(s) per time period" +msgstr "piksela po vremenskom periodu" + +#: SensorDisplayLib/FancyPlotterSettings.cc:126 +msgid "Grid" +msgstr "Mreža" + +#: SensorDisplayLib/FancyPlotterSettings.cc:129 +msgid "Lines" +msgstr "Linije" + +#: SensorDisplayLib/FancyPlotterSettings.cc:133 +msgid "Vertical lines" +msgstr "Uspravne linije" + +#: SensorDisplayLib/FancyPlotterSettings.cc:134 +msgid "Check this to activate the vertical lines if display is large enough." +msgstr "" +"Izaberite ovo da biste aktivirali vertikalne linije ako je prikaz dovoljno " +"velik." + +#: SensorDisplayLib/FancyPlotterSettings.cc:137 +msgid "Distance:" +msgstr "Rastojanje:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:143 +msgid "Enter the distance between two vertical lines here." +msgstr "Ovde unesite rastojanje između dve vertikalne linije." + +#: SensorDisplayLib/FancyPlotterSettings.cc:147 +msgid "Vertical lines scroll" +msgstr "Pomeranje uspravnih linija" + +#: SensorDisplayLib/FancyPlotterSettings.cc:150 +msgid "Horizontal lines" +msgstr "Vodoravne linije" + +#: SensorDisplayLib/FancyPlotterSettings.cc:151 +msgid "Check this to enable horizontal lines if display is large enough." +msgstr "" +"Izaberite ovo da biste aktivirali vodoravne linije ako je prikaz dovoljno " +"velik." + +#: SensorDisplayLib/FancyPlotterSettings.cc:154 +msgid "Count:" +msgstr "Broj:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:160 +msgid "Enter the number of horizontal lines here." +msgstr "Ovde unesite broj vodoravnih linija." + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35 +#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132 +#, no-c-format +msgid "Text" +msgstr "Tekst" + +#: SensorDisplayLib/FancyPlotterSettings.cc:172 +msgid "Labels" +msgstr "Oznake" + +#: SensorDisplayLib/FancyPlotterSettings.cc:173 +msgid "" +"Check this box if horizontal lines should be decorated with the values they " +"mark." +msgstr "" +"Izaberite ovu opciju ako bi vodoravne linije trebale da budu ukrašene " +"vrednostima koje označavaju." + +#: SensorDisplayLib/FancyPlotterSettings.cc:185 +msgid "Top bar" +msgstr "Gornja traka" + +#: SensorDisplayLib/FancyPlotterSettings.cc:186 +msgid "" +"Check this to active the display title bar. This is probably only useful for " +"applet displays. The bar is only visible if the display is large enough." +msgstr "" +"Izaberite ovo da biste aktivirali naslovnu traku prikaza. Ovo je najverovatnije " +"korisno samo za prikaze apleta. Traka je vidljiva samo ako je prikaz dovoljno " +"velik." + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206 +#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102 +#: rc.cpp:117 rc.cpp:138 +#, no-c-format +msgid "Colors" +msgstr "Boje" + +#: SensorDisplayLib/FancyPlotterSettings.cc:196 +msgid "Vertical lines:" +msgstr "Uspravne linije:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:203 +msgid "Horizontal lines:" +msgstr "Vodoravne linije:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:210 +msgid "Background:" +msgstr "Pozadina:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:242 +msgid "Set Color..." +msgstr "Postavi boju..." + +#: SensorDisplayLib/FancyPlotterSettings.cc:244 +msgid "Push this button to configure the color of the sensor in the diagram." +msgstr "Pritisnite ovo dugme da biste podesili boju senzora u dijagramu." + +#: SensorDisplayLib/FancyPlotterSettings.cc:252 +msgid "Move Up" +msgstr "Pomeri gore" + +#: SensorDisplayLib/FancyPlotterSettings.cc:256 +msgid "Move Down" +msgstr "Pomeri dole" + +#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28 +msgid "Sensor Logger" +msgstr "Upisivač dnevnika senzora" + +#: SensorDisplayLib/SensorDisplay.cc:162 +msgid "Launch &System Guard" +msgstr "Pokreni &Zaštitu sistema" + +#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380 +msgid "&Properties" +msgstr "&Svojstva" + +#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381 +msgid "&Remove Display" +msgstr "&Ukloni prikaz" + +#: SensorDisplayLib/SensorDisplay.cc:169 +msgid "&Setup Update Interval..." +msgstr "Pode&si period ažuriranja..." + +#: SensorDisplayLib/SensorDisplay.cc:171 +msgid "&Continue Update" +msgstr "&Nastavi ažuriranje" + +#: SensorDisplayLib/SensorDisplay.cc:173 +msgid "P&ause Update" +msgstr "P&auziraj ažuriranje" + +#: SensorDisplayLib/SensorDisplay.cc:240 +msgid "" +"" +"

This is a sensor display. To customize a sensor display click and hold the " +"right mouse button on either the frame or the display box and select the " +"Properties entry from the popup menu. Select Remove " +"to delete the display from the worksheet.

%1" +msgstr "" +"" +"

Ovo je prikazivač senzora. Da prilagodite prikazivač senzora kliknite i " +"zadržite pritisnutim desno dugme miša iznad okvira ili kutije prikazivača i " +"potom izaberite stavku Podešavanja iz iskačućeg menija. Izaberite " +"Ukloni ako želite da uklonite prikaz sa radnog lista.

%1" + +#: SensorDisplayLib/SensorLogger.cc:136 +msgid "Logging" +msgstr "Upisivanje u dnevnik" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48 +#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18 +#, no-c-format +msgid "Timer Interval" +msgstr "Period tajmera" + +#: SensorDisplayLib/SensorLogger.cc:138 +msgid "Sensor Name" +msgstr "Ime senzora" + +#: SensorDisplayLib/SensorLogger.cc:139 +msgid "Host Name" +msgstr "Ime domaćina" + +#: SensorDisplayLib/SensorLogger.cc:140 +msgid "Log File" +msgstr "Fajl sa zapisom dnevnika" + +#: SensorDisplayLib/SensorLogger.cc:383 +msgid "&Remove Sensor" +msgstr "&Ukloni senzor" + +#: SensorDisplayLib/SensorLogger.cc:384 +msgid "&Edit Sensor..." +msgstr "Ur&edi senzor..." + +#: SensorDisplayLib/SensorLogger.cc:396 +msgid "St&op Logging" +msgstr "Zaustavi v&ođenje dnevnika" + +#: SensorDisplayLib/SensorLogger.cc:398 +msgid "S&tart Logging" +msgstr "&Pokreni vođenje dnevnika" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94 +#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141 +#, no-c-format +msgid "Foreground color:" +msgstr "Boja ispisa:" + +#: SensorDisplayLib/MultiMeterSettings.cc:26 +msgid "Multimeter Settings" +msgstr "Podešavanja multimetra" + +#: SensorDisplayLib/ListViewSettings.cc:26 +msgid "List View Settings" +msgstr "Postavke pregleda liste" + +#: SensorDisplayLib/ReniceDlg.cc:32 +msgid "Renice Process" +msgstr "Uskladi proces" + +#: SensorDisplayLib/ReniceDlg.cc:40 +msgid "" +"You are about to change the scheduling priority of\n" +"process %1. Be aware that only the Superuser (root)\n" +"can decrease the nice level of a process. The lower\n" +"the number is the higher the priority.\n" +"\n" +"Please enter the desired nice level:" +msgstr "" +"Krenuli ste da promenite unapred određeni prioritet\n" +"procesu %1. Jedino superkorisnik (root) može da\n" +"snizi prioritet procesu. Što je broj manji, to je \n" +"prioritet veći.\n" +"\n" +"Unesite nivo prioriteta koji želite:" + +#: SensorDisplayLib/SensorLoggerSettings.cc:26 +msgid "Sensor Logger Settings" +msgstr "Podešavanja upisivača dnevnika senzora" + +#: SensorDisplayLib/DummyDisplay.cc:33 +msgid "Drop Sensor Here" +msgstr "Spusti ovde senzor" + +#: SensorDisplayLib/DummyDisplay.cc:38 +msgid "" +"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser " +"and drop it here. A sensor display will appear that allows you to monitor the " +"values of the sensor over time." +msgstr "" +"Ovo je prazan prostor radnog lista. Dovucite senzor iz pretraživača senzora i " +"spustite ga ovde. Pojaviće se prikaz senzora koji vam omogućuje praćenje " +"vrednosti senzora u vremenu." + +#: SensorDisplayLib/ProcessController.cc:54 +msgid "Name" +msgstr "Ime" + +#: SensorDisplayLib/ProcessController.cc:55 +msgid "PID" +msgstr "PID" + +#: SensorDisplayLib/ProcessController.cc:56 +msgid "PPID" +msgstr "PPID" + +#: SensorDisplayLib/ProcessController.cc:57 +msgid "UID" +msgstr "UID" + +#: SensorDisplayLib/ProcessController.cc:58 +msgid "GID" +msgstr "GID" + +#: SensorDisplayLib/ProcessController.cc:60 +#, c-format +msgid "User%" +msgstr "Korisnik%" + +#: SensorDisplayLib/ProcessController.cc:61 +#, c-format +msgid "System%" +msgstr "Sistem%" + +#: SensorDisplayLib/ProcessController.cc:63 +msgid "VmSize" +msgstr "VmSize" + +#: SensorDisplayLib/ProcessController.cc:64 +msgid "VmRss" +msgstr "VmRss" + +#: SensorDisplayLib/ProcessController.cc:65 +msgid "Login" +msgstr "Prijava" + +#: SensorDisplayLib/ProcessController.cc:66 +msgid "Command" +msgstr "Naredba" + +#: SensorDisplayLib/ProcessController.cc:97 +msgid "All Processes" +msgstr "Svi procesi" + +#: SensorDisplayLib/ProcessController.cc:98 +msgid "System Processes" +msgstr "Sistemski procesi" + +#: SensorDisplayLib/ProcessController.cc:99 +msgid "User Processes" +msgstr "Korisnički procesi" + +#: SensorDisplayLib/ProcessController.cc:100 +msgid "Own Processes" +msgstr "Vaši procesi" + +#: SensorDisplayLib/ProcessController.cc:103 +msgid "&Tree" +msgstr "S&tablo" + +#: SensorDisplayLib/ProcessController.cc:116 +msgid "&Refresh" +msgstr "Os&veži" + +#: SensorDisplayLib/ProcessController.cc:123 +msgid "&Kill" +msgstr "&Ubij" + +#: SensorDisplayLib/ProcessController.cc:206 +msgid "%1: Running Processes" +msgstr "%1: Pokrenuti procesi" + +#: SensorDisplayLib/ProcessController.cc:239 +msgid "You need to select a process first." +msgstr "Morate prvo izabrati proces." + +#: SensorDisplayLib/ProcessController.cc:245 +#, c-format +msgid "" +"_n: Do you want to kill the selected process?\n" +"Do you want to kill the %n selected processes?" +msgstr "" +"Da li zaista želite da ubijete %n izabran proces?\n" +"Da li zaista želite da ubijete %n izabrana procesa?\n" +"Da li zaista želite da ubijete %n izabranih procesa?" + +#: SensorDisplayLib/ProcessController.cc:248 +msgid "Kill Process" +msgstr "Ubij procese" + +#: SensorDisplayLib/ProcessController.cc:252 +msgid "Kill" +msgstr "Ubij" + +#: SensorDisplayLib/ProcessController.cc:258 +msgid "Do not ask again" +msgstr "Ne pitaj ponovo" + +#: SensorDisplayLib/ProcessController.cc:344 +#, c-format +msgid "Error while attempting to kill process %1." +msgstr "Greška prilikom pokušaja da se ubije proces %1." + +#: SensorDisplayLib/ProcessController.cc:349 +#, c-format +msgid "Insufficient permissions to kill process %1." +msgstr "Nedovoljno prava pristupa za ubijanje procesa %1." + +#: SensorDisplayLib/ProcessController.cc:354 +#: SensorDisplayLib/ProcessController.cc:389 +msgid "Process %1 has already disappeared." +msgstr "Proces %1 je već nestao." + +#: SensorDisplayLib/ProcessController.cc:358 +msgid "Invalid Signal." +msgstr "Neispravan signal." + +#: SensorDisplayLib/ProcessController.cc:379 +#, c-format +msgid "Error while attempting to renice process %1." +msgstr "Greška prilikom pokušaja da se proces %1 ponovo uskladi." + +#: SensorDisplayLib/ProcessController.cc:384 +#, c-format +msgid "Insufficient permissions to renice process %1." +msgstr "Nedovoljno prava pristupa za ponovno usklađivanje procesa %1." + +#: SensorDisplayLib/ProcessController.cc:393 +msgid "Invalid argument." +msgstr "Neispravan argument." + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89 +#: rc.cpp:27 rc.cpp:78 +#, no-c-format +msgid "&Enable alarm" +msgstr "&Uključi alarm" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155 +#: rc.cpp:39 rc.cpp:66 +#, no-c-format +msgid "E&nable alarm" +msgstr "U&ključi alarm" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44 +#: rc.cpp:54 +#, no-c-format +msgid "&Show unit" +msgstr "&Prikaži mernu jedinicu" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47 +#: rc.cpp:57 +#, no-c-format +msgid "Enable this to append the unit to the title of the display." +msgstr "Aktivirajte ovo da biste dodali mernu jedinicu naslovu prikaza." + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225 +#: rc.cpp:90 +#, no-c-format +msgid "Normal digit color:" +msgstr "Uobičajena boja za cifre:" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233 +#: rc.cpp:93 +#, no-c-format +msgid "Alarm digit color:" +msgstr "Boja za cifre alarma:" + +#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82 +#: rc.cpp:105 rc.cpp:120 +#, no-c-format +msgid "Text color:" +msgstr "Boja teksta:" + +#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90 +#: rc.cpp:108 +#, no-c-format +msgid "Grid color:" +msgstr "Boja mreže:" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17 +#: rc.cpp:129 +#, no-c-format +msgid "Log File Settings" +msgstr "Postavke dnevničkog fajla" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187 +#: rc.cpp:150 +#, no-c-format +msgid "Select Font..." +msgstr "Odaberi font..." + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199 +#: rc.cpp:153 +#, no-c-format +msgid "Filter" +msgstr "Filter" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238 +#: rc.cpp:156 +#, no-c-format +msgid "&Add" +msgstr "&Dodaj" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254 +#: rc.cpp:162 +#, no-c-format +msgid "&Change" +msgstr "&Izmeni" + +#. i18n: file KSysGuardApplet.xml line 5 +#: rc.cpp:181 +msgid "CPU" +msgstr "CPU" + +#. i18n: file KSysGuardApplet.xml line 10 +#: rc.cpp:183 +msgid "Mem" +msgstr "Mem" + +#: WorkSheetSettings.cc:41 +msgid "Worksheet Properties" +msgstr "Svojstva radnog lista" + +#: WorkSheetSettings.cc:67 +msgid "Rows:" +msgstr "Vrste:" + +#: WorkSheetSettings.cc:76 +msgid "Columns:" +msgstr "Kolone:" + +#: WorkSheetSettings.cc:97 +msgid "Enter the number of rows the sheet should have." +msgstr "Unesite broj vrsta koji list treba da ima." + +#: WorkSheetSettings.cc:98 +msgid "Enter the number of columns the sheet should have." +msgstr "Unesite broj kolona koji bi radni list trebalo da ima." + +#: WorkSheetSettings.cc:100 +msgid "Enter the title of the worksheet here." +msgstr "Ovde unesite naslov radnog lista." + +#: KSysGuardApplet.cc:212 +msgid "&Dancing Bars" +msgstr "&Igrajuće trake" + +#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394 +msgid "" +"The KSysGuard applet does not support displaying of this type of sensor. Please " +"choose another sensor." +msgstr "" +"KSysGuard aplet ne podržava prikazivanje ove vrste senzora. Izaberite drugi " +"senzor." + +#: KSysGuardApplet.cc:334 +msgid "" +"The file %1 does not contain a valid applet definition, which must have a " +"document type 'KSysGuardApplet'." +msgstr "" +"Fajl %1 ne sadrži ispravnu definiciju apleta, koja mora imati vrstu dokumenta " +"„KSysGuardApplet“." + +#: KSysGuardApplet.cc:488 +msgid "Drag sensors from the KDE System Guard into this cell." +msgstr "Dovucite senzore iz KDE System Guard-a u ovu ćeliju." + +#: SensorBrowser.cc:77 +msgid "Sensor Browser" +msgstr "Pretraživač senzora" + +#: SensorBrowser.cc:78 +msgid "Sensor Type" +msgstr "Vrsta senzora" + +#: SensorBrowser.cc:81 +msgid "Drag sensors to empty cells of a worksheet or the panel applet." +msgstr "Dovucite senzore do praznih ćelija radnog lista ili apleta panela." + +#: SensorBrowser.cc:88 +msgid "" +"The sensor browser lists the connected hosts and the sensors that they provide. " +"Click and drag sensors into drop zones of a worksheet or the panel applet. A " +"display will appear that visualizes the values provided by the sensor. Some " +"sensor displays can display values of multiple sensors. Simply drag other " +"sensors on to the display to add more sensors." +msgstr "" +"Pretraživač senzora prikazuje povezane računare i njihove senzore. Kliknite i " +"prevucite senzore do zone za njihovo ispuštanje na radnom listu. Pojaviće se " +"prikaz koji vizuelno prikazuje vrednosti senzora. Neki od prikaza senzora mogu " +"prikazati vrednosti više senzora. Jednostavno dovucite senzore na prikaz da " +"biste dodali još senzora." + +#: SensorBrowser.cc:148 +msgid "Drag sensors to empty fields in a worksheet." +msgstr "Prevucite senzore na prazna polja radne stranice." + +#: ksysguard.cc:64 +msgid "KDE system guard" +msgstr "KDE System Guard" + +#: ksysguard.cc:74 ksysguard.cc:556 +msgid "KDE System Guard" +msgstr "KDE System Guard" + +#: ksysguard.cc:100 +msgid "88888 Processes" +msgstr "88888 Procesa" + +#: ksysguard.cc:101 +msgid "Memory: 88888888888 kB used, 88888888888 kB free" +msgstr "Memorija: 88888888888 kB iskorišćeno, 88888888888 kB slobodno" + +#: ksysguard.cc:103 +msgid "Swap: 888888888 kB used, 888888888 kB free" +msgstr "Swap: 888888888 kB iskorišćeno, 888888888 kB slobodno" + +#: ksysguard.cc:108 +msgid "&New Worksheet..." +msgstr "&Novi radni list..." + +#: ksysguard.cc:111 +msgid "Import Worksheet..." +msgstr "Uvezi radni list..." + +#: ksysguard.cc:114 +msgid "&Import Recent Worksheet" +msgstr "&Uvezi skorašnji radni list..." + +#: ksysguard.cc:117 +msgid "&Remove Worksheet" +msgstr "U&kloni radni list" + +#: ksysguard.cc:120 +msgid "&Export Worksheet..." +msgstr "&Izvezi radni list..." + +#: ksysguard.cc:125 +msgid "C&onnect Host..." +msgstr "P&oveži domaćin..." + +#: ksysguard.cc:127 +msgid "D&isconnect Host" +msgstr "Rask&ini vezu sa domaćinom" + +#: ksysguard.cc:133 +msgid "&Worksheet Properties" +msgstr "Svojstva &radnog lista" + +#: ksysguard.cc:136 +msgid "Load Standard Sheets" +msgstr "Učitaj standardne listove" + +#: ksysguard.cc:140 +msgid "Configure &Style..." +msgstr "Podesi &stil..." + +#: ksysguard.cc:157 +msgid "Do you really want to restore the default worksheets?" +msgstr "Da li stvarno želite da vratite podrazumevane radne listove?" + +#: ksysguard.cc:158 +msgid "Reset All Worksheets" +msgstr "Resetuj sve radne listove" + +#: ksysguard.cc:159 +msgid "Reset" +msgstr "Resetuj" + +#: ksysguard.cc:436 +#, c-format +msgid "" +"_n: 1 Process\n" +"%n Processes" +msgstr "" +"%n proces\n" +"%n procesa\n" +"%n procesa" + +#: ksysguard.cc:446 +msgid "Memory: %1 %2 used, %3 %4 free" +msgstr "Memorija: %1 %2 iskorišćeno, %3 %4 slobodno" + +#: ksysguard.cc:504 +msgid "No swap space available" +msgstr "Prostor za virtuelnu memoriju nije dostupan" + +#: ksysguard.cc:506 +msgid "Swap: %1 %2 used, %3 %4 free" +msgstr "Swap: %1 %2 iskorišćeno, %3 %4 slobodno" + +#: ksysguard.cc:515 +msgid "Show only process list of local host" +msgstr "Prikaži samo listu procesa sa lokalnog računara" + +#: ksysguard.cc:516 +msgid "Optional worksheet files to load" +msgstr "Dodatni fajlovi radnih listova za učitavanje" + +#: ksysguard.cc:558 +msgid "(c) 1996-2002 The KSysGuard Developers" +msgstr "© 1996-2002, razvijači KSysGuard-a" + +#: ksysguard.cc:566 +msgid "" +"Solaris Support\n" +"Parts derived (by permission) from the sunos5\n" +"module of William LeFebvre's \"top\" utility." +msgstr "" +"Podrška za Solaris\n" +"Delovi izvedeni (uz dopuštenje) iz sunos5\n" +"modula William LeFebvre-ovog „top“ alata." -- cgit v1.2.1