From da09f211a04674f2d78dbbbf493e08bcffd2bb7a Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Thu, 20 Dec 2018 14:41:52 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. --- .../messages/tdenetwork/kcmlanbrowser.po | 646 ++++++++++----------- 1 file changed, 319 insertions(+), 327 deletions(-) (limited to 'tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po') diff --git a/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po b/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po index 736eb61736a..ce5ac4392ce 100644 --- a/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po +++ b/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: kcmlanbrowser\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-20 01:34+0100\n" "PO-Revision-Date: 2005-08-02 17:23+0800\n" "Last-Translator: Funda Wang \n" "Language-Team: Simplified Chinese \n" @@ -17,312 +17,45 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0\n" -#: setupwizard.cpp:63 -msgid "LISa Network Neighborhood Setup" -msgstr "LISa 网络邻居设置" - -#: setupwizard.cpp:71 setupwizard.cpp:512 -msgid "Advanced Settings" -msgstr "高级设置" - -#: setupwizard.cpp:126 -msgid "" -"" -"

This wizard will ask you a few questions about your network.

" -"

Usually you can simply keep the suggested settings.

" -"

After you have finished the wizard, you will be able to browse and use " -"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP " -"and NFS resources exactly the same way.

" -"

Therefore you need to setup the LAN Information Server " -"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it " -"has to be run by root, it should be started during the boot process and only " -"one LISa server can run on one machine." -msgstr "" -"" -"

此向导将询问几个关于您网络的问题。

" -"

通常您只需保留推荐设置。

" -"

在您完成此向导后，您就可以用相同方式浏览并使用您局域网上的各种共享资源，不仅包括 Samba/Windows 共享，还包括 FTP，HTTP 和 NFS " -"资源。

" -"

因此，您需要在计算机上正确设置 LAN 信息服务器 (LISa)。LISa 服务器类似于 FTP 或 HTTP 服务器；该程序必须由 " -"root 运行，必须在启动阶段运行，并且一台机器上只能运行一个 LISa 服务器。" - -#: setupwizard.cpp:149 -msgid "" -"" -"

More than one network interface card was found on your system.

" -"

Please choose the one to which your LAN is connected.

" -msgstr "

在您的系统上找到了多张网卡。

请选择您连接局域网的那一张网卡。

" - -#: setupwizard.cpp:164 -msgid "" -"" -"

No network interface card was found on your system.

" -"

Possible reason: no network card is installed. You probably want to cancel " -"now or enter your IP address and network manually

Example: " -"192.168.0.1/255.255.255.0." -msgstr "" -"" -"

未在系统中找到网卡。

" -"

可能的原因：没有安装网卡。您可能想要现在取消，或者手工输入您的 IP 地址和网络。

示例：" -"192.168.0.1/255.255.255.0。" - -#: setupwizard.cpp:185 -msgid "There are two ways LISa can search hosts on your network." -msgstr "LISa 使用两种方法搜索您网络上的主机。" - -#: setupwizard.cpp:187 -msgid "Send pings" -msgstr "发送 pings" - -#: setupwizard.cpp:188 -msgid "" -"All hosts with TCP/IP will respond," -"
whether or not they are samba servers." -"
Don't use it if your network is very large, i.e. more than 1000 hosts." -"
" -msgstr "" -"所有使用 TCP/IP 的主机都会响应，" -"
而不管他们是不是 Samba 服务器。" -"
如果您的网络非常大，如超过 1000 台主机，则不要使用此选项。" -"
" - -#: setupwizard.cpp:191 -msgid "Send NetBIOS broadcasts" -msgstr "发送 NetBIOS 广播" - -#: setupwizard.cpp:192 -msgid "" -"You need to have the samba package (nmblookup) installed." -"
Only samba/windows servers will respond." -"
This method is not very reliable." -"
You should enable it if you are part of a large network." -msgstr "" -"您需要安装了 Samba 包(nmblookup)。" -"
仅有 Samba/Windows 服务器会响应。" -"
这种方式不是非常可靠。" -"
如果您处于大网络中，则应该启用此选项。" - -#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249 -#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340 -msgid "If unsure, keep it as is." -msgstr "如果不确定的话，请不要更改。" - -#: setupwizard.cpp:210 -msgid "" -"All IP addresses included in the specified range will be pinged." -"
If you are part of a small network, e.g. with network mask 255.255.255.0" -"
use your IP address/network mask." -"
" -msgstr "" -"位于指定范围内的所有 IP 地址都会被 ping。" -"
如果您位于小网络中，如子网掩码为 255.255.255.0" -"
请使用您的 IP 地址/子网掩码。" -"
" - -#: setupwizard.cpp:215 -msgid "" -"
There are four ways to specify address ranges:" -"
1. IP address/network mask, like 192.168.0.0/255.255.255.0;" -"
2. single IP addresses, like 10.0.0.23;" -"
3. continuous ranges, like 10.0.1.0-10.0.1.200;" -"
4. ranges for each part of the address, like " -"10-10.1-5.1-25.1-3;" -"
You can also enter combinations of 1 to 4, separated by \";\", like" -"
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" -"
" -msgstr "" -"
有四种格式可以指定地址范围：" -"
1. IP 地址/子网掩码，如 192.168.0.0/255.255.255.0；" -"
2. 单个 IP 地址，如 10.0.0.23；" -"
3. 连续范围，如 10.0.1.0-10.0.1.200；" -"
4. 地址每一部分的范围，如 10-10.1-5.1-25.1-3；" -"
您可以组合使用格式 1 到 4，中间用“;”分隔，如" -"
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；" -"
" - -#: setupwizard.cpp:236 -msgid "" -"This is a security related setting." -"
It provides a simple IP address based way to specify \"trusted\" hosts." -"
Only hosts which fit into the addresses given here are accepted by LISa as " -"clients. The list of hosts published by LISa will also only contain hosts which " -"fit into this scheme." -"
Usually you enter your IP address/network mask here." -msgstr "" -"这是与安全有关的设置。" -"
您可以在这里简单的根据 IP 地址指定“信任的”主机。" -"
仅有那些符合指定地址的主机会被 LISa 接受为客户。而 LISa 公布的主机清单也仅包含符合此条件的主机。" -"
通常您需要在这里输入您的 IP 地址/子网掩码。" - -#: setupwizard.cpp:258 -msgid "" -"
Enter your IP address and network mask here, like " -"192.168.0.1/255.255.255.0" -msgstr "
在这里输入您的网络地址/子网掩码，如 192.168.0.1/255.255.255.0" - -#: setupwizard.cpp:261 -msgid "" -"
To reduce the network load, the LISa servers in one network" -"
cooperate with each other. Therefore you have to enter the broadcast" -"
address here. If you are connected to more than one network, choose " -"
one of the broadcast addresses." -msgstr "" -"
为了减少网络流量，一个网络中的 LISa 服务器是互相合作的。" -"
因此您需要在此输入广播地址。如果您连接到了多个网络，请从" -"
广播地址中选择一个。" - -#: setupwizard.cpp:280 -msgid "" -"
Enter the interval after which LISa, if busy, will update its host list." -msgstr "
输入 LISa 更新主机清单的间隔。" - -#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284 -msgid " sec" -msgstr " 秒" - -#: setupwizard.cpp:286 -msgid "" -"
Please note that the update interval will grow automatically by up to 16 " -"times the value you enter here, if nobody accesses the LISa server. So if you " -"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole " -"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min." -msgstr "" -"
请注意，若没有人访问 LISa 服务器，更新间隔将会自动增长，最到可达您在这里输入的值的 16 倍。所以，如果您在这里输入 300 秒 = 5 " -"分钟，并不意味着 LISa 将会每隔 5 分钟 ping 您的整个网络。间隔将会增至最大 16 x 5 分钟 = 80 分钟。" - -#: setupwizard.cpp:305 -msgid "" -"This page contains several settings you usually only" -"
need if LISa doesn't find all hosts in your network." -msgstr "此页面包含的设置，一般您只会在 LISa 找不到
您网络中的所有主机时才会用到。" - -#: setupwizard.cpp:308 -msgid "Re&port unnamed hosts" -msgstr "报告不知名主机(&P)" - -#: setupwizard.cpp:309 -msgid "" -"Should hosts for which LISa can't resolve the name be included in the host " -"list?" -"
" -msgstr "LISa 无法解析名称的主机是否要包含在主机清单中？
" - -#: setupwizard.cpp:313 -msgid "Wait for replies after first scan" -msgstr "第一次扫描后等待应答" - -#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115 -#: setupwizard.cpp:315 setupwizard.cpp:333 -msgid " ms" -msgstr " 毫秒" - -#: setupwizard.cpp:316 -msgid "" -"How long should LISa wait for answers to pings?" -"
If LISa doesn't find all hosts, try to increase this value." -"
" -msgstr "LISa 应该等待 pings 应答多久？
如果 LISa 找不到全部主机，请试着增加此值。
" - -#: setupwizard.cpp:320 -msgid "Max. number of pings to send at once" -msgstr "一次发送 ping 包的最大数目" - -#: setupwizard.cpp:323 -msgid "" -"How many ping packets should LISa send at once?" -"
If LISa doesn't find all hosts you could try to decrease this value." -"
" -msgstr "LISa 一次应该发送多少个 ping 包？
如果 LISa 找不到全部主机，请试着增加此值。
" - -#: setupwizard.cpp:326 -msgid "Al&ways scan twice" -msgstr "总是扫描两次(&W)" - -#: setupwizard.cpp:330 -msgid "Wait for replies after second scan" -msgstr "第二次扫描后等待应答" - -#: setupwizard.cpp:334 -msgid "If LISa doesn't find all hosts, enable this option." -msgstr "
如果 LISa 找不到全部主机，请启用此选项。
" - -#: setupwizard.cpp:350 +#: _translatorinfo:1 msgid "" -"
Your LAN browsing has been successfully set up." -"
" -"
Make sure that the LISa server is started during the boot process. How this " -"is done depends on your distribution and OS. Usually you have to insert it " -"somewhere in a boot script under /etc." -"
Start the LISa server as root and without any command line options." -"
The config file will now be saved to /etc/lisarc." -"
To test the server, try lan:/ in Konqueror." -"
" -"
If you have problems or suggestions, visit " -"http://lisa-home.sourceforge.net." +"_: NAME OF TRANSLATORS\n" +"Your names" msgstr "" -"
您的局域网浏览已经成功设置了。" -"
" -"
请确定启动阶段会自动运行 LISa 服务器。至于如何进行这一设置，取决于您的发行商和操作系统。通常您需要在 /etc " -"下的启动脚本中添加一些命令。" -"
请用 root 身份不带任何命令行选项启动 LISa 服务器。" -"
配置文件现在将被保存为 /etc/lisarc。" -"
要测试服务器，请在 Konqueror 中试用 lan:/。" -"
" -"
如果您还有问题或者建议，请参见 http://lisa-home.sourceforge.net。" - -#: setupwizard.cpp:437 -msgid "Congratulations!" -msgstr "恭喜！" - -#: setupwizard.cpp:462 -msgid "You can use the same syntax as on the previous page.
" -msgstr "您可以使用和上一页相同的语法。
" -#: setupwizard.cpp:464 +#: _translatorinfo:2 msgid "" -"There are three ways to specify IP addresses:" -"
1. IP address/network mask, like 192.168.0.0/255.255.255.0;" -"
2. continuous ranges, like 10.0.1.0-10.0.1.200;" -"
3. single IP addresses, like 10.0.0.23;" -"
You can also enter combinations of 1 to 3, separated by \";\", " -"
like 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" -"
" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" msgstr "" -"
有三种格式可以指定地址范围：" -"
1. IP 地址/子网掩码，如 192.168.0.0/255.255.255.0；" -"
2. 连续范围，如 10.0.1.0-10.0.1.200；" -"
3. 单个 IP 地址，如 10.0.0.23；" -"
您还可以组合使用格式 1 到 3，中间用“;”分隔，如" -"
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；" -"
" -#: setupwizard.cpp:490 -msgid "Multiple Network Interfaces Found" -msgstr "找到了多张网卡" +#: findnic.cpp:107 findnic.cpp:174 +msgid "Up" +msgstr "连" -#: setupwizard.cpp:493 -msgid "No Network Interface Found" -msgstr "没有找到网卡" +#: findnic.cpp:109 findnic.cpp:176 +msgid "Down" +msgstr "断" -#: setupwizard.cpp:498 -msgid "Specify Search Method" -msgstr "指定搜索方法" +#: findnic.cpp:112 findnic.cpp:280 +msgid "Broadcast" +msgstr "广播" -#: setupwizard.cpp:501 -msgid "Specify Address Range LISa Will Ping" -msgstr "指定 LISa 将要 Ping 的地址范围" +#: findnic.cpp:114 findnic.cpp:273 +msgid "Point to Point" +msgstr "点对点" -#: setupwizard.cpp:504 -msgid "\"Trusted\" Hosts" -msgstr "“信任的”主机" +#: findnic.cpp:117 findnic.cpp:287 +msgid "Multicast" +msgstr "多播" -#: setupwizard.cpp:507 -msgid "Your Broadcast Address" -msgstr "您的广播地址" +#: findnic.cpp:120 findnic.cpp:294 +msgid "Loopback" +msgstr "回环" -#: setupwizard.cpp:510 -msgid "LISa Update Interval" -msgstr "LISa 更新间隔" +#: findnic.cpp:122 findnic.cpp:134 +msgid "Unknown" +msgstr "未知" #: kcmlisa.cpp:63 msgid "Tell LISa Daemon How to Search for Hosts" @@ -352,7 +85,8 @@ msgstr "到这些 &IP 地址：" msgid "" "Enter all ranges to scan, using the format " "'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'" -msgstr "输入要扫描的全部范围，格式为“192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0”" +msgstr "" +"输入要扫描的全部范围，格式为“192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0”" #: kcmlisa.cpp:88 msgid "&Broadcast network address:" @@ -407,6 +141,10 @@ msgstr "主机清单更新间隔：" msgid "Search hosts after this number of seconds" msgstr "经过多少秒后搜索主机" +#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284 +msgid " sec" +msgstr " 秒" + #: kcmlisa.cpp:141 kcmreslisa.cpp:103 msgid "Always check twice for hosts when searching" msgstr "搜索时总是检查两次" @@ -420,6 +158,11 @@ msgstr "第一次扫描后等待主机应答：" msgid "How long to wait for replies to the ICMP echo requests from hosts" msgstr "等待主机应答 ICMP 响应请求的时间" +#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115 +#: setupwizard.cpp:315 setupwizard.cpp:333 +msgid " ms" +msgstr " 毫秒" + #: kcmlisa.cpp:150 kcmreslisa.cpp:112 msgid "Wait for replies from hosts after second scan:" msgstr "第二次扫描后等待应答：" @@ -438,13 +181,11 @@ msgstr "没有找到网卡。" #: kcmlisa.cpp:332 kcmreslisa.cpp:232 msgid "" -"You have more than one network interface installed." -"
Please make sure the suggested settings are correct." -"
" -"
The following interfaces were found:" -"
" -"
" -msgstr "您安装了多个网卡。
请确定推荐设置是正确的。

发现以下网卡：

" +"You have more than one network interface installed.
Please make sure the " +"suggested settings are correct.

The following interfaces were found:" +"

" +msgstr "" +"您安装了多个网卡。
请确定推荐设置是正确的。

发现以下网卡：

" #: kcmlisa.cpp:381 msgid "" @@ -497,9 +238,11 @@ msgstr "您的系统上好像没有安装网卡。" #: kcmreslisa.cpp:242 msgid "" -"The ResLISa daemon is now configured correctly, hopefully." -"
Make sure that the reslisa binary is installed suid root." -msgstr "现在应该已经正确配置了 ResLISa 守护进程。
请确定已经以 suid root 身份安装了 reslisa 程序。" +"The ResLISa daemon is now configured correctly, hopefully.
Make sure that " +"the reslisa binary is installed suid root." +msgstr "" +"现在应该已经正确配置了 ResLISa 守护进程。
请确定已经以 suid root 身" +"份安装了 reslisa 程序。" #: kcmtdeiolan.cpp:41 msgid "Show Links for Following Services" @@ -545,33 +288,282 @@ msgstr "总是" msgid "Never" msgstr "从不" -#: findnic.cpp:107 findnic.cpp:174 -msgid "Up" -msgstr "连" +#: setupwizard.cpp:63 +msgid "LISa Network Neighborhood Setup" +msgstr "LISa 网络邻居设置" -#: findnic.cpp:109 findnic.cpp:176 -msgid "Down" -msgstr "断" +#: setupwizard.cpp:71 setupwizard.cpp:512 +msgid "Advanced Settings" +msgstr "高级设置" -#: findnic.cpp:112 findnic.cpp:280 -msgid "Broadcast" -msgstr "广播" +#: setupwizard.cpp:126 +msgid "" +"

This wizard will ask you a few questions about your network.

" +"

Usually you can simply keep the suggested settings.

After you have " +"finished the wizard, you will be able to browse and use shared resources on " +"your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS " +"resources exactly the same way.

Therefore you need to setup the " +"LAN Information Server (LISa) on your machine. Think of the LISa " +"server as an FTP or HTTP server; it has to be run by root, it should be " +"started during the boot process and only one LISa server can run on one " +"machine." +msgstr "" +"

此向导将询问几个关于您网络的问题。

通常您只需保留推荐设置。

在您完成此向导后，您就可以用相同方式浏览并使用您局域网上的各种共享资源，" +"不仅包括 Samba/Windows 共享，还包括 FTP，HTTP 和 NFS 资源。

因此，您需" +"要在计算机上正确设置 LAN 信息服务器 (LISa)。LISa 服务器类似于 FTP 或 " +"HTTP 服务器；该程序必须由 root 运行，必须在启动阶段运行，并且一台机器上只能运" +"行一个 LISa 服务器。" -#: findnic.cpp:114 findnic.cpp:273 -msgid "Point to Point" -msgstr "点对点" +#: setupwizard.cpp:149 +msgid "" +"

More than one network interface card was found on your system.

Please choose the one to which your LAN is connected.

" +msgstr "" +"

在您的系统上找到了多张网卡。

请选择您连接局域网的那一张网卡。" -#: findnic.cpp:117 findnic.cpp:287 -msgid "Multicast" -msgstr "多播" +#: setupwizard.cpp:164 +msgid "" +"

No network interface card was found on your system.

Possible reason: no network card is installed. You probably want to " +"cancel now or enter your IP address and network manually

Example: " +"192.168.0.1/255.255.255.0." +msgstr "" +"

未在系统中找到网卡。

可能的原因：没有安装网卡。您可能想要" +"现在取消，或者手工输入您的 IP 地址和网络。

示例：" +"192.168.0.1/255.255.255.0。" -#: findnic.cpp:120 findnic.cpp:294 -msgid "Loopback" -msgstr "回环" +#: setupwizard.cpp:185 +msgid "There are two ways LISa can search hosts on your network." +msgstr "LISa 使用两种方法搜索您网络上的主机。" -#: findnic.cpp:122 findnic.cpp:134 -msgid "Unknown" -msgstr "未知" +#: setupwizard.cpp:187 +msgid "Send pings" +msgstr "发送 pings" + +#: setupwizard.cpp:188 +msgid "" +"All hosts with TCP/IP will respond,
whether or not they are samba servers." +"
Don't use it if your network is very large, i.e. more than 1000 hosts." +"
" +msgstr "" +"所有使用 TCP/IP 的主机都会响应，
而不管他们是不是 Samba 服务器。
如果您" +"的网络非常大，如超过 1000 台主机，则不要使用此选项。
" + +#: setupwizard.cpp:191 +msgid "Send NetBIOS broadcasts" +msgstr "发送 NetBIOS 广播" + +#: setupwizard.cpp:192 +msgid "" +"You need to have the samba package (nmblookup) installed.
Only samba/" +"windows servers will respond.
This method is not very reliable.
You " +"should enable it if you are part of a large network." +msgstr "" +"您需要安装了 Samba 包(nmblookup)。
仅有 Samba/Windows 服务器会响应。
这" +"种方式不是非常可靠。
如果您处于大网络中，则应该启用此选项。" + +#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249 +#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340 +msgid "If unsure, keep it as is." +msgstr "如果不确定的话，请不要更改。" + +#: setupwizard.cpp:210 +msgid "" +"All IP addresses included in the specified range will be pinged.
If you " +"are part of a small network, e.g. with network mask 255.255.255.0
use " +"your IP address/network mask.
" +msgstr "" +"位于指定范围内的所有 IP 地址都会被 ping。
如果您位于小网络中，如子网掩码" +"为 255.255.255.0
请使用您的 IP 地址/子网掩码。
" + +#: setupwizard.cpp:215 +msgid "" +"
There are four ways to specify address ranges:
1. IP address/network " +"mask, like 192.168.0.0/255.255.255.0;
2. single IP " +"addresses, like 10.0.0.23;
3. continuous ranges, like " +"10.0.1.0-10.0.1.200;
4. ranges for each part of the address, " +"like 10-10.1-5.1-25.1-3;
You can also enter combinations of " +"1 to 4, separated by \";\", " +"like
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;
" +msgstr "" +"
有四种格式可以指定地址范围：
1. IP 地址/子网掩码，如 " +"192.168.0.0/255.255.255.0；
2. 单个 IP 地址，如 " +"10.0.0.23；
3. 连续范围，如 10.0.1.0-10.0.1.200；
4. 地址每一部分的范围，如 10-10.1-5.1-25.1-3；
您可" +"以组合使用格式 1 到 4，中间用“;”分隔，如" +"
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；
" + +#: setupwizard.cpp:236 +msgid "" +"This is a security related setting.
It provides a simple IP address based " +"way to specify \"trusted\" hosts.
Only hosts which fit into the addresses " +"given here are accepted by LISa as clients. The list of hosts published by " +"LISa will also only contain hosts which fit into this scheme.
Usually you " +"enter your IP address/network mask here." +msgstr "" +"这是与安全有关的设置。
您可以在这里简单的根据 IP 地址指定“信任的”主机。" +"
仅有那些符合指定地址的主机会被 LISa 接受为客户。而 LISa 公布的主机清单也" +"仅包含符合此条件的主机。
通常您需要在这里输入您的 IP 地址/子网掩码。" + +#: setupwizard.cpp:258 +msgid "" +"
Enter your IP address and network mask here, like " +"192.168.0.1/255.255.255.0" +msgstr "" +"
在这里输入您的网络地址/子网掩码，如 192.168.0.1/255.255.255.0" + +#: setupwizard.cpp:261 +msgid "" +"
To reduce the network load, the LISa servers in one network
cooperate " +"with each other. Therefore you have to enter the broadcast
address here. " +"If you are connected to more than one network, choose
one of the " +"broadcast addresses." +msgstr "" +"
为了减少网络流量，一个网络中的 LISa 服务器是互相合作的。
因此您需要在" +"此输入广播地址。如果您连接到了多个网络，请从
广播地址中选择一个。" + +#: setupwizard.cpp:280 +msgid "" +"
Enter the interval after which LISa, if busy, will update its host list." +msgstr "
输入 LISa 更新主机清单的间隔。" + +#: setupwizard.cpp:286 +msgid "" +"
Please note that the update interval will grow automatically by up to 16 " +"times the value you enter here, if nobody accesses the LISa server. So if " +"you enter 300 sec = 5 min here, this does not mean that LISa will ping your " +"whole network every 5 minutes. The interval will increase up to 16 x 5 min = " +"80 min." +msgstr "" +"
请注意，若没有人访问 LISa 服务器，更新间隔将会自动增长，最到可达您在这里" +"输入的值的 16 倍。所以，如果您在这里输入 300 秒 = 5 分钟，并不意味着 LISa 将" +"会每隔 5 分钟 ping 您的整个网络。间隔将会增至最大 16 x 5 分钟 = 80 分钟。" + +#: setupwizard.cpp:305 +msgid "" +"This page contains several settings you usually only
need if LISa doesn't " +"find all hosts in your network." +msgstr "" +"此页面包含的设置，一般您只会在 LISa 找不到
您网络中的所有主机时才会用到。" + +#: setupwizard.cpp:308 +msgid "Re&port unnamed hosts" +msgstr "报告不知名主机(&P)" + +#: setupwizard.cpp:309 +msgid "" +"Should hosts for which LISa can't resolve the name be included in the host " +"list?
" +msgstr "LISa 无法解析名称的主机是否要包含在主机清单中？
" + +#: setupwizard.cpp:313 +msgid "Wait for replies after first scan" +msgstr "第一次扫描后等待应答" + +#: setupwizard.cpp:316 +msgid "" +"How long should LISa wait for answers to pings?
If LISa doesn't find all " +"hosts, try to increase this value.
" +msgstr "" +"LISa 应该等待 pings 应答多久？
如果 LISa 找不到全部主机，请试着增加此值。" +"
" + +#: setupwizard.cpp:320 +msgid "Max. number of pings to send at once" +msgstr "一次发送 ping 包的最大数目" + +#: setupwizard.cpp:323 +msgid "" +"How many ping packets should LISa send at once?
If LISa doesn't find all " +"hosts you could try to decrease this value.
" +msgstr "" +"LISa 一次应该发送多少个 ping 包？
如果 LISa 找不到全部主机，请试着增加此" +"值。
" + +#: setupwizard.cpp:326 +msgid "Al&ways scan twice" +msgstr "总是扫描两次(&W)" + +#: setupwizard.cpp:330 +msgid "Wait for replies after second scan" +msgstr "第二次扫描后等待应答" + +#: setupwizard.cpp:334 +msgid "If LISa doesn't find all hosts, enable this option." +msgstr "
如果 LISa 找不到全部主机，请启用此选项。
" + +#: setupwizard.cpp:350 +msgid "" +"
Your LAN browsing has been successfully set up.

Make sure that " +"the LISa server is started during the boot process. How this is done depends " +"on your distribution and OS. Usually you have to insert it somewhere in a " +"boot script under /etc.
Start the LISa server as root and " +"without any command line options.
The config file will now be saved to " +"/etc/lisarc.
To test the server, try lan:/ in " +"Konqueror.

If you have problems or suggestions, visit http://lisa-" +"home.sourceforge.net." +msgstr "" +"
您的局域网浏览已经成功设置了。

请确定启动阶段会自动运行 LISa 服务" +"器。至于如何进行这一设置，取决于您的发行商和操作系统。通常您需要在 /" +"etc 下的启动脚本中添加一些命令。
请用 root 身份不带任何命令行选项启" +"动 LISa 服务器。
配置文件现在将被保存为 /etc/lisarc。
要测" +"试服务器，请在 Konqueror 中试用 lan:/。

如果您还有问题或" +"者建议，请参见 http://lisa-home.sourceforge.net。" + +#: setupwizard.cpp:437 +msgid "Congratulations!" +msgstr "恭喜！" + +#: setupwizard.cpp:462 +msgid "You can use the same syntax as on the previous page.
" +msgstr "您可以使用和上一页相同的语法。
" + +#: setupwizard.cpp:464 +msgid "" +"There are three ways to specify IP addresses:
1. IP address/network mask, " +"like 192.168.0.0/255.255.255.0;
2. continuous ranges, " +"like 10.0.1.0-10.0.1.200;
3. single IP addresses, like " +"10.0.0.23;
You can also enter combinations of 1 to 3, separated by " +"\";\",
like 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" +"
" +msgstr "" +"
有三种格式可以指定地址范围：
1. IP 地址/子网掩码，如 " +"192.168.0.0/255.255.255.0；
2. 连续范围，如 " +"10.0.1.0-10.0.1.200；
3. 单个 IP 地址，如 10.0.0.23；
您还可以组合使用格式 1 到 3，中间用“;”分隔，如" +"
192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；
" + +#: setupwizard.cpp:490 +msgid "Multiple Network Interfaces Found" +msgstr "找到了多张网卡" + +#: setupwizard.cpp:493 +msgid "No Network Interface Found" +msgstr "没有找到网卡" + +#: setupwizard.cpp:498 +msgid "Specify Search Method" +msgstr "指定搜索方法" + +#: setupwizard.cpp:501 +msgid "Specify Address Range LISa Will Ping" +msgstr "指定 LISa 将要 Ping 的地址范围" + +#: setupwizard.cpp:504 +msgid "\"Trusted\" Hosts" +msgstr "“信任的”主机" + +#: setupwizard.cpp:507 +msgid "Your Broadcast Address" +msgstr "您的广播地址" + +#: setupwizard.cpp:510 +msgid "LISa Update Interval" +msgstr "LISa 更新间隔" #~ msgid "&Guided LISa Setup..." #~ msgstr "LISa 设置向导(&G)..." -- cgit v1.2.1