From ecef7a7766f587bc47321b6e2c50f737542d56ef Mon Sep 17 00:00:00 2001
From: Automated System Most small private networks use class C networks, which allow up to 255 "
"computers in your network. So simply use addresses like 192.168.1.1, "
"192.168.1.2, 192.168.1.171 and so on for your computers. Cass C networks: 192.168.0.0 to 192.168.255.25, for example "
-"192.168.0.13. Class B networks: 172.16.0.0 to 172.31.255.255, for example "
-"172.28.2.5 Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13."
+" Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5"
+"p>\n"
" Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14 Please ensure that all IP addresses you give to your computers are "
"unique; you will have many problems if the same address is assigned to more "
"than one network device. Your Platform is Not "
-"Supported Your Platform is Not Supported"
+"p> These are the To stop one, do the same for the "
-"Stop section.
Linear mode tells the "
-"boot loader the location of kernels in linear addressing rather than "
-"sector/head/cylinder.
linear mode is required for some SCSI drives, and "
+"boot loader the location of kernels in linear addressing rather than sector/"
+"head/cylinder.
linear mode is required for some SCSI drives, and "
"shouldn't hurt unless you're planning to create a boot disk to be used with "
"a different computer.
See the lilo.conf man page for details."
msgstr ""
@@ -122,13 +122,12 @@ msgstr ""
#: kde-qt-common/general.cpp:93
msgid ""
"Enter the password required for bootup (if any) here. If restricted "
-"above is checked, the password is required for additional parameters "
-"only.
WARNING: The password is stored in clear text in "
-"/etc/lilo.conf. You'll want to make sure nobody untrusted can read this "
-"file. Also, you probably don't want to use your normal/root password "
-"here.
This sets a default for all Linux kernels you want to boot. If you "
-"need a per-kernel setting, go to the Operating systems tab and select "
-"Details."
+"above is checked, the password is required for additional parameters only."
+"
WARNING: The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here.
This sets a "
+"default for all Linux kernels you want to boot. If you need a per-kernel "
+"setting, go to the Operating systems tab and select Details."
msgstr ""
#: kde-qt-common/general.cpp:97
@@ -140,8 +139,8 @@ msgid ""
"You can select the default graphics mode here.
If you intend to use a VGA "
"graphics mode, you must compile the kernel with support for framebuffer "
"devices. The ask setting brings up a prompt at boot time.
This "
-"sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the Operating systems tab and select "
+"sets a default for all Linux kernels you want to boot. If you need a per-"
+"kernel setting, go to the Operating systems tab and select "
"Details."
msgstr ""
@@ -471,8 +470,8 @@ msgstr ""
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"default for the following bootups. This way, lilo \"locks\" on a choice "
-"until it is manually overridden.
This sets the lock option in "
-"lilo.conf"
+"until it is manually overridden.
This sets the lock option in lilo."
+"conf"
msgstr ""
#: kde/Details.cpp:86 qt/Details.cpp:89
@@ -486,10 +485,10 @@ msgstr ""
#: kde/Details.cpp:94 qt/Details.cpp:98
msgid ""
"Enter the password required for bootup (if any) here. If restricted "
-"above is checked, the password is required for additional parameters "
-"only.
WARNING: The password is stored in clear text in "
-"/etc/lilo.conf. You'll want to make sure nobody untrusted can read this "
-"file. Also, you probably don't want to use your normal/root password here."
+"above is checked, the password is required for additional parameters only."
+"
WARNING: The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
msgstr ""
#: kde/kcontrol.cpp:48
@@ -527,8 +526,8 @@ msgstr ""
#: qt/standalone.cpp:47
msgid ""
"This button calls up the program's online help system. If it does nothing, "
-"no help file has been written (yet); in that case, use the What's "
-"This button on the left."
+"no help file has been written (yet); in that case, use the What's This"
+"i> button on the left."
msgstr ""
#: qt/standalone.cpp:49
diff --git a/template/messages/tdeadmin/kdat.pot b/template/messages/tdeadmin/kdat.pot
index 6efa6dcd1dc..b976d80b06d 100644
--- a/template/messages/tdeadmin/kdat.pot
+++ b/template/messages/tdeadmin/kdat.pot
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2020-05-11 04:10+0200\n"
+"POT-Creation-Date: 2021-07-07 18:22+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME services "
-"available on your computer. To start a service, drag it onto the "
-"Start section of a runlevel.
To stop one, do the same for the Stop" +"em> section.
" msgstr "" #: OldView.cpp:242 @@ -439,11 +439,10 @@ msgstr "" #: TopWidget.cpp:422 msgid "" "If the lock is closed , you don't have "
-"the right permissions to edit the init "
-"configuration.
Either restart %1 as root (or another more privileged " -"user), or ask your sysadmin to install %1 suid or " -"sgid.
The latter way is not recommended " -"though, due to security issues.
" +"the right permissions to edit the init configuration." +"p>Either restart %1 as root (or another more privileged user), or ask " +"your sysadmin to install %1 suid or sgid.
The latter " +"way is not recommended though, due to security issues.
" msgstr "" #: TopWidget.cpp:566 @@ -652,9 +651,9 @@ msgstr "" msgid "" "\n" -"You have finished the initial configuration of SysV-Init Editor. " -"Press the button labeled Finish to start editing your " -"init-configuration.\n" +"You have finished the initial configuration of SysV-Init Editor. Press" +"b> the button labeled Finish to start editing your init-" +"configuration.\n" "
" msgstr "" @@ -688,8 +687,8 @@ msgstr "" msgid "Colors" msgstr "" -#: lookandfeelconfig.ui:251 lookandfeelconfig.ui:299 -#: lookandfeelconfig.ui:347 lookandfeelconfig.ui:379 +#: lookandfeelconfig.ui:251 lookandfeelconfig.ui:299 lookandfeelconfig.ui:347 +#: lookandfeelconfig.ui:379 #, no-c-format msgid "Dummy" msgstr "" diff --git a/template/messages/tdeadmin/kuser.pot b/template/messages/tdeadmin/kuser.pot index 26fe1a9a524..38541be3588 100644 --- a/template/messages/tdeadmin/kuser.pot +++ b/template/messages/tdeadmin/kuser.pot @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2020-05-11 04:10+0200\n" +"POT-Creation-Date: 2021-07-07 18:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME