From ecef7a7766f587bc47321b6e2c50f737542d56ef Mon Sep 17 00:00:00 2001
From: Automated System \n"
"Whether or not to do lookups on IP addresses to get a\n"
-"fully-qualified hostname. This defaults to Off for performance "
-"reasons... \n"
"ex: On \n"
-"The timeout (in seconds) before requests time out. Default is 300 "
-"seconds. \n"
"ex: 300 \n"
" \n"
"Note: local certificate authentication can be substituted by\n"
"the client for Basic or Digest when connecting to the\n"
@@ -1643,8 +1643,8 @@ msgid ""
"ServerAdmin, etc.)\n"
"Max jobs per printer (MaxJobsPerPrinter)\n"
" \n"
-"The MaxJobsPerPrinter directive controls the maximum number of "
-"active\n"
+"The MaxJobsPerPrinter directive controls the maximum number of active"
+"i>\n"
"jobs that are allowed for each printer or class. Once a printer or class\n"
"reaches the limit, new jobs will be rejected until one of the active jobs\n"
"is completed, stopped, aborted, or canceled. Backing up on save will cause Kate to copy the disk file to "
-"'<prefix><filename><suffix>' before saving changes. The "
+" Backing up on save will cause Kate to copy the disk file to '<"
+"prefix><filename><suffix>' before saving changes. The "
"suffix defaults to ~ and prefix is empty by default"
msgstr ""
@@ -752,8 +752,8 @@ msgstr ""
#: part/katedialogs.cpp:934
msgid ""
-"The editor will search the given number of folder levels upwards for "
-".kateconfig file and load the settings line from it."
+"The editor will search the given number of folder levels upwards for ."
+"kateconfig file and load the settings line from it."
msgstr ""
#: part/katedialogs.cpp:937
@@ -843,9 +843,9 @@ msgstr ""
#: part/katedialogs.cpp:1341
msgid ""
-"Display a dialog with a list of all available mime types to choose "
-"from. The File Extensions entry will automatically be "
-"edited as well."
+"Display a dialog with a list of all available mime types to choose from."
+" The File Extensions entry will automatically be edited "
+"as well."
msgstr ""
#: part/katedialogs.cpp:1345
@@ -1326,22 +1326,22 @@ msgstr ""
msgid ""
" This string allows you to configure Kate's settings for the files "
"selected by this mimetype using Kate variables. You can set almost any "
-"configuration option, such as highlight, indent-mode, encoding, "
-"etc. For a full list of known variables, see the manual. For a full list of known variables, see the manual. This option is only available if some text is selected in the "
-"document. If available and enabled, only the selected text is "
-"printed. This option is only available if some text is selected in the document."
+"p> If available and enabled, only the selected text is printed. If enabled, line numbers will be printed on the left side of the "
-"page(s). If enabled, line numbers will be printed on the left side of the page(s)."
+" Sets the color of Word Wrap-related markers: Sets the color of Word Wrap-related markers: For help on individual commands, do For help on individual commands, do This is the Katepart command line. This is the Katepart command line. If enabled, the pattern matching will be case sensitive, otherwise "
-"not. If enabled, the pattern matching will be case sensitive, otherwise not."
+"p>"
msgstr ""
#: plugins/autobookmarker/autobookmarker.cpp:304
@@ -3111,169 +3110,120 @@ msgstr ""
msgid "Word Completion"
msgstr ""
-#: data/4dos.xml:9 data/ahk.xml:3 data/ample.xml:3
-#: data/awk.xml:3 data/bash.xml:11
-#: data/chicken.xml:44 data/coffee.xml:7
-#: data/dosbat.xml:11 data/erlang.xml:39
-#: data/euphoria.xml:32 data/ferite.xml:3
-#: data/gnuplot.xml:3 data/html-php.xml:13
-#: data/idconsole.xml:3 data/j.xml:27
-#: data/javascript.xml:6 data/ld.xml:4
-#: data/lsl.xml:14 data/lua.xml:38 data/mason.xml:3
-#: data/mel.xml:23 data/perl.xml:42 data/php.xml:67
-#: data/pig.xml:4 data/pike.xml:4 data/praat.xml:24
-#: data/puppet.xml:37 data/python.xml:16
-#: data/q.xml:3 data/qml.xml:4 data/r.xml:10
-#: data/rexx.xml:3 data/ruby.xml:33
-#: data/scheme.xml:3 data/sed.xml:3
-#: data/sieve.xml:4 data/taskjuggler.xml:14
-#: data/tcl.xml:31 data/tcsh.xml:11
-#: data/uscript.xml:3 data/velocity.xml:3
-#: data/xonotic-console.xml:3 data/zsh.xml:11
+#: data/4dos.xml:9 data/ahk.xml:3 data/ample.xml:3 data/awk.xml:3
+#: data/bash.xml:11 data/chicken.xml:44 data/coffee.xml:7 data/dosbat.xml:11
+#: data/erlang.xml:39 data/euphoria.xml:32 data/ferite.xml:3 data/gnuplot.xml:3
+#: data/html-php.xml:13 data/idconsole.xml:3 data/j.xml:27
+#: data/javascript.xml:6 data/ld.xml:4 data/lsl.xml:14 data/lua.xml:38
+#: data/mason.xml:3 data/mel.xml:23 data/perl.xml:42 data/php.xml:67
+#: data/pig.xml:4 data/pike.xml:4 data/praat.xml:24 data/puppet.xml:37
+#: data/python.xml:16 data/q.xml:3 data/qml.xml:4 data/r.xml:10 data/rexx.xml:3
+#: data/ruby.xml:33 data/scheme.xml:3 data/sed.xml:3 data/sieve.xml:4
+#: data/taskjuggler.xml:14 data/tcl.xml:31 data/tcsh.xml:11 data/uscript.xml:3
+#: data/velocity.xml:3 data/xonotic-console.xml:3 data/zsh.xml:11
msgid ""
"_: Language Section\n"
"Scripts"
msgstr ""
-#: data/abap.xml:3 data/actionscript.xml:3
-#: data/ada.xml:6 data/ansic89.xml:27
-#: data/bitbake.xml:11 data/c.xml:3 data/cg.xml:23
-#: data/cgis.xml:3 data/clipper.xml:3
-#: data/clojure.xml:25 data/commonlisp.xml:26
-#: data/component-pascal.xml:13 data/cpp.xml:9
-#: data/crk.xml:2 data/cs.xml:2 data/curry.xml:34
-#: data/d.xml:104 data/e.xml:3 data/eiffel.xml:13
-#: data/fortran.xml:3 data/freebasic.xml:3
-#: data/fsharp.xml:12 data/gcc.xml:18
-#: data/glsl.xml:3 data/go.xml:29
-#: data/grammar.xml:6 data/groovy.xml:6
-#: data/haskell.xml:3 data/haxe.xml:15
-#: data/idl.xml:3 data/ilerpg.xml:48
-#: data/inform.xml:5 data/isocpp.xml:13
-#: data/java.xml:3 data/julia.xml:32
-#: data/kbasic.xml:3 data/lex.xml:21
-#: data/literate-curry.xml:4 data/literate-haskell.xml:3
-#: data/logtalk.xml:4 data/lpc.xml:19
-#: data/m4.xml:41 data/modelica.xml:19
-#: data/modula-2-iso-only.xml:4 data/modula-2-pim-only.xml:4
-#: data/modula-2-r10-only.xml:4 data/modula-2.xml:4
-#: data/monobasic.xml:13 data/nemerle.xml:4
-#: data/nesc.xml:3 data/noweb.xml:3
-#: data/objectivec.xml:3 data/objectivecpp.xml:3
-#: data/ocaml.xml:19 data/ocamllex.xml:11
-#: data/ocamlyacc.xml:14 data/oors.xml:3
-#: data/opal.xml:3 data/opencl.xml:3
-#: data/pascal.xml:4 data/prolog.xml:107
-#: data/protobuf.xml:3 data/purebasic.xml:2
-#: data/qt4.xml:13 data/rapidq.xml:3
-#: data/rsiidl.xml:3 data/rust.xml:37
-#: data/sather.xml:3 data/scala.xml:3
-#: data/sml.xml:3 data/tads3.xml:5
-#: data/xharbour.xml:3 data/yacc.xml:35
+#: data/abap.xml:3 data/actionscript.xml:3 data/ada.xml:6 data/ansic89.xml:27
+#: data/bitbake.xml:11 data/c.xml:3 data/cg.xml:23 data/cgis.xml:3
+#: data/clipper.xml:3 data/clojure.xml:25 data/commonlisp.xml:26
+#: data/component-pascal.xml:13 data/cpp.xml:9 data/crk.xml:2 data/cs.xml:2
+#: data/curry.xml:34 data/d.xml:104 data/e.xml:3 data/eiffel.xml:13
+#: data/fortran.xml:3 data/freebasic.xml:3 data/fsharp.xml:12 data/gcc.xml:18
+#: data/glsl.xml:3 data/go.xml:29 data/grammar.xml:6 data/groovy.xml:6
+#: data/haskell.xml:3 data/haxe.xml:15 data/idl.xml:3 data/ilerpg.xml:48
+#: data/inform.xml:5 data/isocpp.xml:13 data/java.xml:3 data/julia.xml:32
+#: data/kbasic.xml:3 data/lex.xml:21 data/literate-curry.xml:4
+#: data/literate-haskell.xml:3 data/logtalk.xml:4 data/lpc.xml:19
+#: data/m4.xml:41 data/modelica.xml:19 data/modula-2-iso-only.xml:4
+#: data/modula-2-pim-only.xml:4 data/modula-2-r10-only.xml:4
+#: data/modula-2.xml:4 data/monobasic.xml:13 data/nemerle.xml:4 data/nesc.xml:3
+#: data/noweb.xml:3 data/objectivec.xml:3 data/objectivecpp.xml:3
+#: data/ocaml.xml:19 data/ocamllex.xml:11 data/ocamlyacc.xml:14 data/oors.xml:3
+#: data/opal.xml:3 data/opencl.xml:3 data/pascal.xml:4 data/prolog.xml:107
+#: data/protobuf.xml:3 data/purebasic.xml:2 data/qt4.xml:13 data/rapidq.xml:3
+#: data/rsiidl.xml:3 data/rust.xml:37 data/sather.xml:3 data/scala.xml:3
+#: data/sml.xml:3 data/tads3.xml:5 data/xharbour.xml:3 data/yacc.xml:35
#: data/zonnon.xml:3
msgid ""
"_: Language Section\n"
"Sources"
msgstr ""
-#: data/abc.xml:5 data/alert.xml:29
-#: data/alert_indent.xml:3 data/changelog.xml:3
-#: data/cmake.xml:36 data/css-php.xml:32
-#: data/cue.xml:3 data/debianchangelog.xml:3
-#: data/debiancontrol.xml:3 data/diff.xml:18
-#: data/dockerfile.xml:4 data/email.xml:6
-#: data/gcode.xml:31 data/gdb.xml:10
-#: data/git-rebase.xml:3 data/hunspell-aff.xml:6
-#: data/hunspell-dat.xml:3 data/hunspell-dic.xml:3
-#: data/hunspell-idx.xml:3 data/jam.xml:24
-#: data/javascript-php.xml:12 data/lilypond.xml:23
-#: data/m3u.xml:17 data/makefile.xml:10
-#: data/meson.xml:3 data/modelines.xml:13
-#: data/mup.xml:3 data/pgn.xml:15 data/povray.xml:9
-#: data/qmake.xml:3 data/rpmspec.xml:11
+#: data/abc.xml:5 data/alert.xml:29 data/alert_indent.xml:3
+#: data/changelog.xml:3 data/cmake.xml:36 data/css-php.xml:32 data/cue.xml:3
+#: data/debianchangelog.xml:3 data/debiancontrol.xml:3 data/diff.xml:18
+#: data/dockerfile.xml:4 data/email.xml:6 data/gcode.xml:31 data/gdb.xml:10
+#: data/git-rebase.xml:3 data/hunspell-aff.xml:6 data/hunspell-dat.xml:3
+#: data/hunspell-dic.xml:3 data/hunspell-idx.xml:3 data/jam.xml:24
+#: data/javascript-php.xml:12 data/lilypond.xml:23 data/m3u.xml:17
+#: data/makefile.xml:10 data/meson.xml:3 data/modelines.xml:13 data/mup.xml:3
+#: data/pgn.xml:15 data/povray.xml:9 data/qmake.xml:3 data/rpmspec.xml:11
#: data/valgrind-suppression.xml:3
msgid ""
"_: Language Section\n"
"Other"
msgstr ""
-#: data/ahdl.xml:3 data/spice.xml:4
-#: data/systemc.xml:10 data/systemverilog.xml:42
-#: data/vera.xml:42 data/verilog.xml:3
+#: data/ahdl.xml:3 data/spice.xml:4 data/systemc.xml:10
+#: data/systemverilog.xml:42 data/vera.xml:42 data/verilog.xml:3
#: data/vhdl.xml:14
msgid ""
"_: Language Section\n"
"Hardware"
msgstr ""
-#: data/ansys.xml:3 data/bmethod.xml:3
-#: data/dot.xml:4 data/gap.xml:17 data/gdl.xml:3
-#: data/magma.xml:3 data/mathematica.xml:3
-#: data/matlab.xml:60 data/maxima.xml:24
-#: data/octave.xml:18 data/replicode.xml:14
-#: data/sci.xml:3 data/stata.xml:3
-#: data/tibasic.xml:3 data/yacas.xml:3
+#: data/ansys.xml:3 data/bmethod.xml:3 data/dot.xml:4 data/gap.xml:17
+#: data/gdl.xml:3 data/magma.xml:3 data/mathematica.xml:3 data/matlab.xml:60
+#: data/maxima.xml:24 data/octave.xml:18 data/replicode.xml:14 data/sci.xml:3
+#: data/stata.xml:3 data/tibasic.xml:3 data/yacas.xml:3
msgid ""
"_: Language Section\n"
"Scientific"
msgstr ""
-#: data/apache.xml:15 data/asterisk.xml:19
-#: data/cisco.xml:3 data/desktop.xml:4
-#: data/fstab.xml:4 data/git-ignore.xml:3
-#: data/gitolite.xml:3 data/ini.xml:3
-#: data/mergetagtext.xml:28 data/nagios.xml:3
-#: data/varnish.xml:3 data/varnishtest.xml:3
-#: data/winehq.xml:3 data/xorg.xml:3
+#: data/apache.xml:15 data/asterisk.xml:19 data/cisco.xml:3 data/desktop.xml:4
+#: data/fstab.xml:4 data/git-ignore.xml:3 data/gitolite.xml:3 data/ini.xml:3
+#: data/mergetagtext.xml:28 data/nagios.xml:3 data/varnish.xml:3
+#: data/varnishtest.xml:3 data/winehq.xml:3 data/xorg.xml:3
msgid ""
"_: Language Section\n"
"Configuration"
msgstr ""
-#: data/asm-avr.xml:36 data/asm-dsp56k.xml:4
-#: data/asm-m68k.xml:4 data/asm6502.xml:3
-#: data/fasm.xml:16 data/gnuassembler.xml:46
-#: data/mips.xml:3 data/nasm.xml:43
-#: data/picsrc.xml:10
+#: data/asm-avr.xml:36 data/asm-dsp56k.xml:4 data/asm-m68k.xml:4
+#: data/asm6502.xml:3 data/fasm.xml:16 data/gnuassembler.xml:46 data/mips.xml:3
+#: data/nasm.xml:43 data/picsrc.xml:10
msgid ""
"_: Language Section\n"
"Assembler"
msgstr ""
-#: data/asn1.xml:12 data/asp.xml:3
-#: data/bibtex.xml:9 data/carto-css.xml:6
-#: data/ccss.xml:9 data/coldfusion.xml:3
-#: data/context.xml:3 data/css.xml:26
-#: data/ddoc.xml:52 data/djangotemplate.xml:7
-#: data/doxygen.xml:34 data/doxygenlua.xml:30
-#: data/dtd.xml:6 data/ftl.xml:3
-#: data/gettext.xml:26 data/glosstex.xml:3
-#: data/haml.xml:3 data/hamlet.xml:8
-#: data/html.xml:7 data/javadoc.xml:3
-#: data/json.xml:15 data/jsp.xml:3 data/latex.xml:3
-#: data/less.xml:3 data/mab.xml:3 data/mako.xml:7
-#: data/mandoc.xml:3 data/mediawiki.xml:7
-#: data/metafont.xml:9 data/pango.xml:3
-#: data/postscript.xml:3 data/ppd.xml:12
-#: data/relaxng.xml:22 data/relaxngcompact.xml:3
-#: data/rest.xml:14 data/restructuredtext.xml:3
-#: data/rhtml.xml:47 data/roff.xml:10
-#: data/rtf.xml:3 data/scss.xml:28 data/sgml.xml:3
-#: data/sisu.xml:3 data/template-toolkit.xml:21
-#: data/texinfo.xml:3 data/textile.xml:18
-#: data/txt2tags.xml:6 data/vcard.xml:5
-#: data/wml.xml:57 data/xml.xml:9
-#: data/xmldebug.xml:3 data/xslt.xml:55
+#: data/asn1.xml:12 data/asp.xml:3 data/bibtex.xml:9 data/carto-css.xml:6
+#: data/ccss.xml:9 data/coldfusion.xml:3 data/context.xml:3 data/css.xml:26
+#: data/ddoc.xml:52 data/djangotemplate.xml:7 data/doxygen.xml:34
+#: data/doxygenlua.xml:30 data/dtd.xml:6 data/ftl.xml:3 data/gettext.xml:26
+#: data/glosstex.xml:3 data/haml.xml:3 data/hamlet.xml:8 data/html.xml:7
+#: data/javadoc.xml:3 data/json.xml:15 data/jsp.xml:3 data/latex.xml:3
+#: data/less.xml:3 data/mab.xml:3 data/mako.xml:7 data/mandoc.xml:3
+#: data/mediawiki.xml:7 data/metafont.xml:9 data/pango.xml:3
+#: data/postscript.xml:3 data/ppd.xml:12 data/relaxng.xml:22
+#: data/relaxngcompact.xml:3 data/rest.xml:14 data/restructuredtext.xml:3
+#: data/rhtml.xml:47 data/roff.xml:10 data/rtf.xml:3 data/scss.xml:28
+#: data/sgml.xml:3 data/sisu.xml:3 data/template-toolkit.xml:21
+#: data/texinfo.xml:3 data/textile.xml:18 data/txt2tags.xml:6 data/vcard.xml:5
+#: data/wml.xml:57 data/xml.xml:9 data/xmldebug.xml:3 data/xslt.xml:55
#: data/xul.xml:7 data/yaml.xml:4
msgid ""
"_: Language Section\n"
"Markup"
msgstr ""
-#: data/fgl-4gl.xml:3 data/fgl-per.xml:3
-#: data/ldif.xml:3 data/progress.xml:3
-#: data/sql-mysql.xml:8 data/sql-oracle.xml:4
-#: data/sql-postgresql.xml:6 data/sql.xml:7
+#: data/fgl-4gl.xml:3 data/fgl-per.xml:3 data/ldif.xml:3 data/progress.xml:3
+#: data/sql-mysql.xml:8 data/sql-oracle.xml:4 data/sql-postgresql.xml:6
+#: data/sql.xml:7
msgid ""
"_: Language Section\n"
"Database"
diff --git a/template/messages/tdelibs/knotify.pot b/template/messages/tdelibs/knotify.pot
index c75038b2ce7..9cbdafb0f4e 100644
--- a/template/messages/tdelibs/knotify.pot
+++ b/template/messages/tdelibs/knotify.pot
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2020-05-11 03:58+0200\n"
+"POT-Creation-Date: 2021-07-07 18:13+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME %1 By clicking on "
-"the button next to the text edit box you can browse to an appropriate "
-"URL. This list should show the types of file that your application can "
@@ -5619,25 +5605,23 @@ msgid ""
" MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
"identifying the type of data based on filename extensions and correspondent "
"mimetypes. Example: the \"bmp\" part that comes after the dot in "
-"flower.bmp indicates that it is a specific kind of image, "
-"image/x-bmp. To know which application should open each type of file, "
-"the system should be informed about the abilities of each application to "
-"handle these extensions and mimetypes. If you want to associate this application with one or more mimetypes that "
"are not in this list, click on the button Add below. If there are one "
"or more filetypes that this application cannot handle, you may want to "
-"remove them from the list clicking on the button Remove "
-"below.\n"
"
Note that, in "
-"all the above modes, if a search string has not been or cannot be "
-"determined, then the Find Text Dialog will fall back to the last search text."
+"automatically entered into the Find Text dialog):
Note that, in all the above modes, if a search string has not been "
+"or cannot be determined, then the Find Text Dialog will fall back to the "
+"last search text."
msgstr ""
#: part/katedialogs.cpp:587
@@ -723,8 +723,8 @@ msgstr ""
#: part/katedialogs.cpp:919
msgid ""
-"*.txt; "
-"*.text
. The string is a semicolon-separated list of masks."
+"uses an asterisk and the file extension, for example *.txt; *.text"
+"code>. The string is a semicolon-separated list of masks."
msgstr ""
#: part/katefiletype.cpp:349
msgid ""
"The mime type mask allows you to select files by mimetype. The string is a "
-"semicolon-separated list of mimetypes, for example
text/plain; "
-"text/english
."
+"semicolon-separated list of mimetypes, for example text/plain; text/"
+"english
."
msgstr ""
#: part/katefiletype.cpp:353
@@ -1515,8 +1515,8 @@ msgstr ""
#: part/kateluaindentscript.cpp:156
msgid ""
-"document.insertText:Three parameters needed (line,col,text) "
-"(number,number,string)"
+"document.insertText:Three parameters needed (line,col,text) (number,number,"
+"string)"
msgstr ""
#: part/kateluaindentscript.cpp:253
@@ -1561,15 +1561,14 @@ msgstr ""
#: part/kateprinter.cpp:659
msgid ""
-"
Note: Do "
-"not use the '|' (vertical bar) character."
+"
Note: Do not use the '|' (vertical "
+"bar) character."
msgstr ""
#: part/kateprinter.cpp:804
@@ -1806,9 +1805,9 @@ msgstr ""
#: part/kateschema.cpp:374
msgid ""
-"
"
msgstr ""
@@ -2195,9 +2194,9 @@ msgstr ""
#: part/kateview.cpp:251
msgid ""
-"Use this to clean the indentation of a selected block of text (only "
-"tabs/only spaces)
You can configure whether tabs should be honored "
-"and used or replaced with spaces, in the configuration dialog."
+"Use this to clean the indentation of a selected block of text (only tabs/"
+"only spaces)
You can configure whether tabs should be honored and "
+"used or replaced with spaces, in the configuration dialog."
msgstr ""
#: part/kateview.cpp:254
@@ -2216,9 +2215,9 @@ msgstr ""
#: part/kateview.cpp:259
msgid ""
-"This command comments out the current line or a selected block of "
-"text.
The characters for single/multiple line comments are defined "
-"within the language's highlighting."
+"This command comments out the current line or a selected block of text."
+"
The characters for single/multiple line comments are defined within "
+"the language's highlighting."
msgstr ""
#: part/kateview.cpp:262
@@ -2716,8 +2715,8 @@ msgstr ""
#: part/kateviewhelpers.cpp:239
msgid ""
-"'help "
-"<command>'
'help <command>'
"
+"p>"
msgstr ""
#: part/kateviewhelpers.cpp:250
@@ -2730,8 +2729,8 @@ msgstr ""
#: part/kateviewhelpers.cpp:258
msgid ""
-"
Syntax: command [ "
-"arguments ]
For a list of available commands, enter "
+"
Syntax: command "
+"[ arguments ]
For a list of available commands, enter "
"help list
For help for individual commands, enter "
"help <command>
http://www.trinitydesktop.org
If unsure, keep this option enabled as it "
"makes your files more manageable."
msgstr ""
@@ -3306,9 +3300,8 @@ msgstr ""
#: tdeio/global.cpp:634
msgid ""
-"This means that the contents of the requested file or folder "
-"%1 could not be retrieved, as read access could not be "
-"obtained."
+"This means that the contents of the requested file or folder %1"
+"strong> could not be retrieved, as read access could not be obtained."
msgstr ""
#: tdeio/global.cpp:637
@@ -3335,9 +3328,9 @@ msgstr ""
#: tdeio/global.cpp:654
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol could not be started. This is usually due to "
-"technical reasons."
+"The program on your computer which provides access to the %1"
+"strong> protocol could not be started. This is usually due to technical "
+"reasons."
msgstr ""
#: tdeio/global.cpp:657
@@ -3353,8 +3346,8 @@ msgstr ""
#: tdeio/global.cpp:666
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol has reported an internal error."
+"The program on your computer which provides access to the %1"
+"strong> protocol has reported an internal error."
msgstr ""
#: tdeio/global.cpp:674
@@ -3363,11 +3356,11 @@ msgstr ""
#: tdeio/global.cpp:675
msgid ""
-"The Uniform Resource "
-"Locator (URL) that you entered was not properly formatted. "
-"The format of a URL is generally as "
-"follows:
If you do not want TDE to supply an extension "
-"for the filename, you can either turn this option off or you can suppress it "
-"by adding a period (.) to the end of the filename (the period will be "
+"no extension is specified in the %2 text area when you click Save"
+"b>, %3 will be added to the end of the filename (if the filename does not "
+"already exist). This extension is based on the file type that you have "
+"chosen to save in.
If you do not want TDE to supply an extension for "
+"the filename, you can either turn this option off or you can suppress it by "
+"adding a period (.) to the end of the filename (the period will be "
"automatically removed).protocol://user:password@www.example.org:port/fol"
-"der/filename.extension?query=value
"
+"The Uniform Resource L"
+"strong>ocator (URL) that you entered was not properly formatted. The format "
+"of a URL is generally as follows:protocol://user:"
+"password@www.example.org:port/folder/filename.extension?query=value"
+"strong>
"
msgstr ""
#: tdeio/global.cpp:684
@@ -3395,9 +3388,8 @@ msgstr ""
msgid ""
"You may perform a search on the Trinity website for a TDE program (called a "
"tdeioslave, ioslave or tdeio) which supports this protocol. Places to search "
-"include https://mirror.git.trini"
-"tydesktop.org/cgit/ or the repos for your distribution."
+"include https://"
+"mirror.git.trinitydesktop.org/cgit/ or the repos for your distribution."
msgstr ""
#: tdeio/global.cpp:699
@@ -3410,9 +3402,8 @@ msgstr ""
#: tdeio/global.cpp:701
msgid ""
-"The Uniform Resource "
-"Locator (URL) that you entered did not refer to a specific "
-"resource."
+"The Uniform Resource L"
+"strong>ocator (URL) that you entered did not refer to a specific resource."
msgstr ""
#: tdeio/global.cpp:704
@@ -3712,9 +3703,9 @@ msgstr ""
#: tdeio/global.cpp:887
msgid ""
-"The Uniform Resource "
-"Locator (URL) that you entered did not refer to a valid "
-"mechanism of accessing the specific resource, %1%2."
+"The Uniform Resource L"
+"strong>ocator (URL) that you entered did not refer to a valid mechanism of "
+"accessing the specific resource, %1%2."
msgstr ""
#: tdeio/global.cpp:892
@@ -3872,9 +3863,8 @@ msgstr ""
#: tdeio/global.cpp:1009
msgid ""
-"An attempt to determine information about the status of the resource "
-"%1, such as the resource name, type, size, etc., was "
-"unsuccessful."
+"An attempt to determine information about the status of the resource "
+"%1, such as the resource name, type, size, etc., was unsuccessful."
msgstr ""
#: tdeio/global.cpp:1012
@@ -3953,8 +3943,8 @@ msgstr ""
#: tdeio/global.cpp:1067
msgid ""
-"An attempt to alter the permissions on the specified resource "
-"%1 failed."
+"An attempt to alter the permissions on the specified resource %1"
+"strong> failed."
msgstr ""
#: tdeio/global.cpp:1074
@@ -3971,8 +3961,8 @@ msgstr ""
#: tdeio/global.cpp:1083
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol has unexpectedly terminated."
+"The program on your computer which provides access to the %1"
+"strong> protocol has unexpectedly terminated."
msgstr ""
#: tdeio/global.cpp:1091
@@ -3981,9 +3971,8 @@ msgstr ""
#: tdeio/global.cpp:1092
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol could not obtain the memory required to "
-"continue."
+"The program on your computer which provides access to the %1"
+"strong> protocol could not obtain the memory required to continue."
msgstr ""
#: tdeio/global.cpp:1100
@@ -3992,9 +3981,9 @@ msgstr ""
#: tdeio/global.cpp:1101
msgid ""
-"While retrieving information about the specified proxy host, "
-"%1, an Unknown Host error was encountered. An unknown host "
-"error indicates that the requested name could not be located on the Internet."
+"While retrieving information about the specified proxy host, %1"
+"strong>, an Unknown Host error was encountered. An unknown host error "
+"indicates that the requested name could not be located on the Internet."
msgstr ""
#: tdeio/global.cpp:1105
@@ -4022,9 +4011,9 @@ msgstr ""
#: tdeio/global.cpp:1120
msgid ""
-"Please file a bug at http://bugs.trinitydesktop.org/ "
-"to inform the TDE team of the unsupported authentication method."
+"Please file a bug at http://bugs."
+"trinitydesktop.org/ to inform the TDE team of the unsupported "
+"authentication method."
msgstr ""
#: tdeio/global.cpp:1126
@@ -4104,8 +4093,8 @@ msgstr ""
#: tdeio/global.cpp:1178
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol has reported an unknown error: %2."
+"The program on your computer which provides access to the %1"
+"strong> protocol has reported an unknown error: %2."
msgstr ""
#: tdeio/global.cpp:1186
@@ -4114,9 +4103,8 @@ msgstr ""
#: tdeio/global.cpp:1187
msgid ""
-"The program on your computer which provides access to the "
-"%1 protocol has reported an interruption of an unknown "
-"type: %2."
+"The program on your computer which provides access to the %1"
+"strong> protocol has reported an interruption of an unknown type: %2."
msgstr ""
#: tdeio/global.cpp:1195
@@ -4126,8 +4114,8 @@ msgstr ""
#: tdeio/global.cpp:1196
msgid ""
"The requested operation required the deleting of the original file, most "
-"likely at the end of a file move operation. The original file "
-"%1 could not be deleted."
+"likely at the end of a file move operation. The original file %1"
+"strong> could not be deleted."
msgstr ""
#: tdeio/global.cpp:1205
@@ -4137,8 +4125,8 @@ msgstr ""
#: tdeio/global.cpp:1206
msgid ""
"The requested operation required the creation of a temporary file in which "
-"to save the new file while being downloaded. This temporary file "
-"%1 could not be deleted."
+"to save the new file while being downloaded. This temporary file %1"
+"strong> could not be deleted."
msgstr ""
#: tdeio/global.cpp:1215
@@ -4147,8 +4135,8 @@ msgstr ""
#: tdeio/global.cpp:1216
msgid ""
-"The requested operation required the renaming of the original file "
-"%1, however it could not be renamed."
+"The requested operation required the renaming of the original file "
+"%1, however it could not be renamed."
msgstr ""
#: tdeio/global.cpp:1224
@@ -4157,8 +4145,8 @@ msgstr ""
#: tdeio/global.cpp:1225
msgid ""
-"The requested operation required the creation of a temporary file "
-"%1, however it could not be created."
+"The requested operation required the creation of a temporary file "
+"%1, however it could not be created."
msgstr ""
#: tdeio/global.cpp:1233
@@ -5450,8 +5438,7 @@ msgstr ""
msgid "Turn O&ff All"
msgstr ""
-#: tdefile/knotifywidgetbase.ui:173
-#: tdefile/knotifywidgetbase.ui:184
+#: tdefile/knotifywidgetbase.ui:173 tdefile/knotifywidgetbase.ui:184
#, no-c-format
msgid "Allows you to change the behavior for all events at once"
msgstr ""
@@ -5610,8 +5597,7 @@ msgstr ""
msgid "&Supported file types:"
msgstr ""
-#: tdefile/kpropertiesdesktopbase.ui:50
-#: tdefile/kpropertiesdesktopbase.ui:93
+#: tdefile/kpropertiesdesktopbase.ui:50 tdefile/kpropertiesdesktopbase.ui:93
#, no-c-format
msgid ""
"
MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for " "identifying the type of data based on filename extensions and correspondent " "mimetypes. Example: the \"bmp\" part that comes after the dot in " -"flower.bmp indicates that it is a specific kind of image, " -"image/x-bmp. To know which application should open each type of file, " -"the system should be informed about the abilities of each application to " -"handle these extensions and mimetypes.
" +"flower.bmp indicates that it is a specific kind of image, image/x-bmp" +"u>. To know which application should open each type of file, the system " +"should be informed about the abilities of each application to handle these " +"extensions and mimetypes." msgstr "" diff --git a/template/messages/tdelibs/tdelibs.pot b/template/messages/tdelibs/tdelibs.pot index 29e5f978dd8..409734438e8 100644 --- a/template/messages/tdelibs/tdelibs.pot +++ b/template/messages/tdelibs/tdelibs.pot @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-06-08 18:14+0000\n" +"POT-Creation-Date: 2021-07-07 18:13+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAMETDE is translated into many languages thanks to the work of the " "translation teams all over the world.
For more information on TDE " -"internationalization visit the TD" -"E Weblate Translation Workspace (TWTW)
" +"internationalization visit the TDE Weblate Translation Workspace " +"(TWTW)" msgstr "" #: tdecore/tdeaboutdata.cpp:454 @@ -3860,9 +3830,9 @@ msgstr "" #: tdecore/tdeapplication.cpp:1139 msgid "" -"_: Dear Translator! Translate this string to the string 'LTR' in " -"left-to-right languages (as english) or to 'RTL' in right-to-left languages " -"(such as Hebrew and Arabic) to get proper widget layout." +"_: Dear Translator! Translate this string to the string 'LTR' in left-to-" +"right languages (as english) or to 'RTL' in right-to-left languages (such as " +"Hebrew and Arabic) to get proper widget layout." msgstr "" #: tdecore/tdeapplication.cpp:1612 @@ -4785,8 +4755,7 @@ msgstr "" msgid "Scanner" msgstr "" -#: tdeabc/scripts/entrylist:83 -#: tdecore/tdehw/tdehardwaredevices.cpp:4303 +#: tdeabc/scripts/entrylist:83 tdecore/tdehw/tdehardwaredevices.cpp:4303 msgid "Sound" msgstr "" @@ -6243,8 +6212,8 @@ msgstr "" #: tdehtml/tdehtml_part.cpp:4824 msgid "" -"You chose the severity Critical. Please note that this severity is " "intended only for bugs that
Does the bug you are reporting cause any of the above damage? If it does " "not, please select a lower severity. Thank you!
" msgstr "" @@ -7714,8 +7683,8 @@ msgid "" "You chose the severity Grave. Please note that this severity is " "intended only for bugs that
Does the bug you are reporting cause any of the above damage? If it does " "not, please select a lower severity. Thank you!
" msgstr "" @@ -7744,8 +7713,8 @@ msgstr "" #: tdeui/kcharselect.cpp:366 msgid "" "_: Character\n" -"The Trinity Desktop Environment was born as a fork of the K " "Desktop Environment version 3.5, which was originally written by the KDE " -"Team, a world-wide network of software engineers committed to Free Software " +"Team, a world-wide network of software engineers committed to Free Software " "development. The name Trinity was chosen because the word means " "Three as in continuation of KDE 3.
Since then, TDE has " "evolved to be an independent and standalone computer desktop environment " @@ -9118,11 +9085,10 @@ msgid "" "giving up on the efficiency, productivity and traditional user interface " "experience characteristic of the original KDE 3 series.
No single "
"group, company or organization controls the Trinity source code. Everyone is "
-"welcome to contribute to Trinity.
Visit http://www.trinitydesktop.org for "
-"more information about Trinity, and http://www.kde.org for more information on "
-"the KDE project.
Software can always be improved, and the Trinity Team is ready to do so. " "However, you - the user - must tell us when something does not work as " "expected or could be done better.
The Trinity Desktop Environment has " -"a bug tracking system. Visit http://bugs.trinitydesktop.org " -"or use the \"Report Bug...\" dialog from the \"Help\" menu to report " -"bugs.
If you have a suggestion for improvement then you are welcome to " -"use the bug tracking system to register your wish. Make sure you use the " -"severity called \"Wishlist\".
" +"a bug tracking system. Visit http://bugs.trinitydesktop.org or use the \"Report Bug...\" dialog " +"from the \"Help\" menu to report bugs.If you have a suggestion for " +"improvement then you are welcome to use the bug tracking system to register " +"your wish. Make sure you use the severity called \"Wishlist\".
" msgstr "" #: tdeui/tdeabouttde.cpp:61 msgid "" "You do not have to be a software developer to be a member of the Trinity " "team. You can join the national teams that translate program interfaces. You " -"can provide graphics, themes, sounds, and improved documentation. You " -"decide!
Visit the TDE Gitea " -"Workspace (TGW) to find out how you can contribute or mail us using one " -"of the available mailing " -"lists.
If you need more information or documentation, then a visit " -"to http://www.trinitydesktop.org/doc" -"s will provide you with what you need.
" +"can provide graphics, themes, sounds, and improved documentation. You decide!" +"Visit the TDE Gitea Workspace (TGW) to find out how you can " +"contribute or mail us using one of the available mailing lists.
If you need " +"more information or documentation, then a visit to http://www.trinitydesktop.org/docs will " +"provide you with what you need.
" msgstr "" #: tdeui/tdeabouttde.cpp:76 @@ -9161,9 +9124,9 @@ msgid "" "support the expenses incurred to keep the TDE servers running, so that you - " "the user - can access them at any time. You are encouraged to support " "Trinity through a financial or hardware donation, using one of the ways " -"described at http://www.trinitydesktop.o" -"rg/donate.php.Thank you very much in advance for your support!
" +"described at http://www." +"trinitydesktop.org/donate.php.Thank you very much in advance for " +"your support!
" msgstr "" #: tdeui/tdeabouttde.cpp:86 @@ -9647,8 +9610,8 @@ msgid "" "(whereN
is a integer number, e.g. \\1, \\2, ...), will "
"be replaced with the corresponding capture (\"parenthesized substring\") "
"from the pattern.To include a literal \\N
in your "
-"replacement, put an extra backslash in front of it, like "
-"\\\\N
.
\\\\N"
+"code>.
Description: | %1 |
Author:" -" | %2 |
Version: | %3 |
" -"License: | %4 |
The diagnostics is:
The desktop file %1 could not be "
-"found.
The diagnostics is:
The desktop file %1 could not be found.
The diagnostics is:
The desktop file %1 does not specify a "
-"library.
The diagnostics is:
The desktop file %1 does not specify a library."
+"
Check these " "points carefully and try to remove the module mentioned in the error " -"message. If this fails, consider contacting your distributor or " -"packager.
This program uses TQt version %1.
TQt is a C++ " "toolkit for multiplatform GUI & application development.
TQt "
-"provides single-source portability across MS Windows, "
-"Mac OS X, Linux, and all major commercial Unix variants.
TQt is "
-"also available for embedded devices.
TQt is a Trolltech product. See " -"https://trinitydesktop.org/docs/qt3/ for more information.
" +"provides single-source portability across MS Windows, Mac OS " +"X, Linux, and all major commercial Unix variants.TQt is a Trolltech product. See https://" +"trinitydesktop.org/docs/qt3/ for more information.
" msgstr "" #: ../../dependencies/tqt3/src/dialogs/qmessagebox.cpp:1603 @@ -12325,9 +12288,8 @@ msgstr "" msgid "Unknown word:" msgstr "" -#: tdespell2/ui/tdespell2ui.ui:41 -#: tdespell2/ui/tdespell2ui.ui:58 tdeui/tdespellui.ui:41 -#: tdeui/tdespellui.ui:58 +#: tdespell2/ui/tdespell2ui.ui:41 tdespell2/ui/tdespell2ui.ui:58 +#: tdeui/tdespellui.ui:41 tdeui/tdespellui.ui:58 #, no-c-format msgid "" "This word was considered to be an \"unknown word\" because it does "
@@ -12359,9 +12321,8 @@ msgstr ""
msgid "&Language:"
msgstr ""
-#: tdespell2/ui/tdespell2ui.ui:75
-#: tdespell2/ui/tdespell2ui.ui:202 tdeui/tdespellui.ui:75
-#: tdeui/tdespellui.ui:264
+#: tdespell2/ui/tdespell2ui.ui:75 tdespell2/ui/tdespell2ui.ui:202
+#: tdeui/tdespellui.ui:75 tdeui/tdespellui.ui:264
#, no-c-format
msgid ""
" If the unknown word is misspelled, you should check if the correction for "
"it is available and if it is, click on it. If none of the words in this list "
-"is a good replacement you may type the correct word in the edit box "
-"above. To correct this word click Replace if you want to correct only "
-"this occurrence or Replace All if you want to correct all "
-"occurrences.
Click here to let this occurrence of the unknown word remain as is.
\n" "This action is useful when the word is a name, an acronym, a foreign word " -"or any other unknown word that you want to use but not add to the " -"dictionary.
\n" +"or any other unknown word that you want to use but not add to the dictionary." +"\n" "Click here to let all occurrences of the unknown word remain as they " -"are.
\n" +"Click here to let all occurrences of the unknown word remain as they are." +"
\n" "This action is useful when the word is a name, an acronym, a foreign word " -"or any other unknown word that you want to use but not add to the " -"dictionary.
\n" +"or any other unknown word that you want to use but not add to the dictionary." +"\n" "Samba server
Adobe Windows PostScript driver files plus the " "CUPS printer PPD will be exported to the [print$] special share of " "the Samba server (to change the source CUPS server, use the " -"Samba username
User needs to have write access to the " -"[print$] share on the Samba server. [print$] holds printer " -"drivers prepared for download to Windows clients. This dialog does not work " -"for Samba servers configured with security = share (but works fine " -"with security = user)." +"Samba username
User needs to have write access to the [print" +"$] share on the Samba server. [print$] holds printer drivers " +"prepared for download to Windows clients. This dialog does not work for " +"Samba servers configured with security = share (but works fine with " +"security = user)." msgstr "" #: cups/cupsaddsmb2.cpp:97 msgid "" -"Samba password
The Samba setting encrypt passwords = " -"yes (default) requires prior use of smbpasswd -a [username] " +"Samba password
The Samba setting encrypt passwords = yes" +"tt> (default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" @@ -102,8 +102,8 @@ msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb manual page " "for detailed information, you need CUPS " -"version 1.1.11 or higher). You may want to try again with another " -"login/password." +"version 1.1.11 or higher). You may want to try again with another login/" +"password." msgstr "" #: cups/cupsaddsmb2.cpp:353 @@ -117,21 +117,20 @@ msgstr "" #: cups/cupsaddsmb2.cpp:374 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " -"clients through Samba. This operation requires the Adobe " -"PostScript Driver, a recent version of Samba 2.2.x and a running SMB " -"service on the target server. Click Export to start the operation. " -"Read the cupsaddsmb manual page in Konqueror " -"or type man cupsaddsmb in a console window to learn more about this " -"functionality." +"clients through Samba. This operation requires the Adobe PostScript Driver, a " +"recent version of Samba 2.2.x and a running SMB service on the target " +"server. Click Export to start the operation. Read the cupsaddsmb manual page in Konqueror or type man " +"cupsaddsmb in a console window to learn more about this functionality." msgstr "" #: cups/cupsaddsmb2.cpp:394 msgid "" -"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you " -"need CUPS version 1.1.11 or higher)." +"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb" +"a> manual page for more details (you need CUPS version 1.1.11 or higher)." msgstr "" #: cups/cupsaddsmb2.cpp:405 @@ -308,15 +307,13 @@ msgstr "" msgid "Unable to set job attributes: " msgstr "" -#: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 -#: lpr/matichandler.cpp:358 +#: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" -#: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 -#: lpr/matichandler.cpp:405 +#: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." @@ -397,9 +394,9 @@ msgstr "" #: cups/kmcupsuimanager.cpp:101 msgid "" "Fax/Modem printer
Use this for a fax/modem printer. This " -"requires the installation of the fax4CUPS backend. Documents " -"sent on this printer will be faxed to the given target fax number.
Enter the URI corresponding to the printer to be installed. " -"Examples:
Enter the URI corresponding to the printer to be installed. Examples:" +"p>
The pen " -"width value can be set here in case the original HP-GL file does not have it " -" set. The pen width specifies the value in micrometers. The default value of " -"1000 produces lines that are 1000 micrometers == 1 millimeter in width. " -"Specifying a pen width of 0 produces lines that are exactly 1 pixel wide. " -"
Note: The penwidth option set here is ignored if the pen " +"width value can be set here in case the original HP-GL file does not have " +"it set. The pen width specifies the value in micrometers. The default value " +"of 1000 produces lines that are 1000 micrometers == 1 millimeter in width. " +"Specifying a pen width of 0 produces lines that are exactly 1 pixel wide. " +"p>
Note: The penwidth option set here is ignored if the pen " "widths are set inside the plot file itself..
Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:
-o " @@ -811,15 +808,14 @@ msgid "" "developed by Hewlett-Packard to drive Pen Plotting devices. " "TDEPrint can (with the help of CUPS) convert the HP-GL file format and " "print it on any installed printer.
Note 1: To print HP-GL " -"files, start 'kprinter' and simply load the file into the running " -"kprinter.
Note 2: The 'fitplot' parameter provided on this " -"dialog does also work for printing PDF files (if your CUPS version is more " -"recent than 1.1.22).
Additional hint for power " -"users: These TDEPrint GUI elements match with CUPS commandline job " -"option parameters:
-o blackplot=... # examples: \"true\" or " -"\"false\"" -"
-o fitplot=... # examples: \"true\" or \"false\" " -"
-o penwidth=... # examples: \"true\" or \"false\"
Note 2: The 'fitplot' parameter provided on this dialog does " +"also work for printing PDF files (if your CUPS version is more recent than " +"1.1.22).
Additional hint for power users: " +"These TDEPrint GUI elements match with CUPS commandline job option " +"parameters:
-o blackplot=... # examples: \"true\" or \"false" +"\"" msgstr "" #: cups/kphpgl2page.cpp:113 @@ -855,18 +851,18 @@ msgid "" "rotation.
-o fitplot=... # examples: \"true\" or \"false\"
-" +"o penwidth=... # examples: \"true\" or \"false\"
The hue value is a number from -360 to 360 and represents " "the color hue rotation. The following table summarizes the change you will " "see for the base colors:
Original | hue=-45 | hue=45 | " -"
---|---|---|
Red | Purple | " -"Yellow-orange |
Green | " -"Yellow-green | Blue-green |
Yellow | " -"Orange | Green-yellow |
Blue | Sky-blue | Purple | " -"
Magenta | Indigo | " -"Crimson |
Cyan | " -"Blue-green | Light-navy-blue |
Additional hint for power users: This TDEPrint GUI " -"element matches with the CUPS commandline job option parameter:
" -" -o hue=... # use range from \"-360\" to \"360\"" +"
Additional hint for " +"power users: This TDEPrint GUI element matches with the CUPS " +"commandline job option parameter:
-o hue=... # use range " +"from \"-360\" to \"360\"" msgstr "" #: cups/kpimagepage.cpp:83 @@ -879,9 +875,9 @@ msgid "" "uses more toner. A color saturation of 0 produces a black-and-white print, " "while a value of 200 will make the colors extremely intense.
Additional hint for power users: This TDEPrint GUI " -"element matches with the CUPS commandline job option parameter:
" -" -o saturation=... # use range from \"0\" to \"200\"" -"" +"element matches with the CUPS commandline job option parameter: " +"
-o saturation=... # use range from \"0\" to \"200\"" +"p> " msgstr "" #: cups/kpimagepage.cpp:101 @@ -892,8 +888,9 @@ msgid "" "darken the print. The default gamma is 1000.
Note:
the " "gamma value adjustment is not visible in the thumbnail preview.Additional hint for power users: This TDEPrint GUI " -"element matches with the CUPS commandline job option parameter:
" -" -o gamma=... # use range from \"1\" to \"3000\"" +"element matches with the CUPS commandline job option parameter: " +"
-o gamma=... # use range from \"1\" to \"3000\"" +"" msgstr "" #: cups/kpimagepage.cpp:118 @@ -960,8 +957,8 @@ msgid "" "on horizontal and vertical radio buttons to move image alignment on paper " "around. Options are:
Image Positioning:
Select a pair of radiobuttons to "
-" move image to the position you want on the paper printout. Default is "
+" Image Positioning: Select a pair of radiobuttons "
+"to move image to the position you want on the paper printout. Default is "
"'center'. Additional hint for power users: "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter: They contain any string you type into the line edit field. Additional hint for power users: This TDEPrint GUI "
-"element matches with the CUPS commandline job option parameter:
-o position=... # examples: \"top-left\" or "
@@ -1080,9 +1077,9 @@ msgid ""
"top and bottom of each page. They appear on the pages surrounded by a little "
"frame box.
"
-" -o page-label=\"...\" # example: \"Company Confidential\"
"
-"
-o page-label=\"...\" # example: \"Company Confidential\" " +"pre> " msgstr "" #: cups/kpschedulepage.cpp:102 @@ -1178,22 +1175,22 @@ msgid "" "additional print filters and backends which understand custom job options. " "You can specify such custom job options here. If in doubt, ask your system " "administrator..
Operator Messages: You may " -"send additional messages to the operator(s) of your production printers " -"(e.g. in your Central Repro Department
) Messages can be read by the " +"send additional messages to the operator(s) of your production printers (e." +"g. in your Central Repro Department) Messages can be read by the " "operator(s) (or yourself) by viewing the \"Job IPP Report\" for the " "job. Examples:
A standard CUPS job option:
" -"(Name) number-up -- (Value) 9 " -"
A job option for custom CUPS filters or backends:
" -"(Name) DANKA_watermark -- (Value) " +"(Name) number-up -- (Value) 9" +"em>
A job option for custom CUPS filters or " +"backends:
(Name) DANKA_watermark -- (Value) " "Company_Confidential
A message to the operator(s):
" -"(Name) Deliver_after_completion -- (Value) " -"to_Marketing_Departm.
Note: the fields must not " -"include spaces, tabs or quotes. You may need to double-click on a field to " -"edit it.
Warning: Do not use such standard CUPS option names which " -"also can be used through the TDEPrint GUI. Results may be unpredictable if " -"they conflict, or if they are sent multiple times. For all options " -"supported by the GUI, please do use the GUI. (Each GUI element's " -"'WhatsThis' names the related CUPS option name.)
" +"(Name) Deliver_after_completion -- (Value) to_Marketing_Departm." +"
Note: the fields must not include spaces, tabs or " +"quotes. You may need to double-click on a field to edit it.
Warning:" +"b> Do not use such standard CUPS option names which also can be used " +"through the TDEPrint GUI. Results may be unpredictable if they conflict, " +"or if they are sent multiple times. For all options supported by the GUI, " +"please do use the GUI. (Each GUI element's 'WhatsThis' names the related " +"CUPS option name.)
" msgstr "" #: cups/kptagspage.cpp:77 @@ -1235,9 +1232,9 @@ msgid "" "size of characters when printing a text file.The default value is " "6, meaning that the font is scaled in a way that 6 lines per inch will be " "printed.
Additional hint for power users: This " -"TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o lpi=... # example \"5\" or \"7\" " -"" +"TDEPrint GUI element matches with the CUPS commandline job option parameter:" +"
-o lpi=... # example \"5\" or \"7\"" +"qt>" msgstr "" #: cups/kptextpage.cpp:69 @@ -1246,9 +1243,9 @@ msgid "" "text will be printed on each page when. printing text files.
The " "default value is 1, meaning that only one column of text per page will be " "printed.
Additional hint for power users: This " -"TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o columns=... # example: \"2\" or \"4\" " -"" +"TDEPrint GUI element matches with the CUPS commandline job option parameter:" +"
-o columns=... # example: \"2\" or \"4\"" +"qt>" msgstr "" #: cups/kptextpage.cpp:84 @@ -1267,8 +1264,8 @@ msgid "" "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter:
-o cpi=... # " "example: \"8\" or \"12\"" -"" +"\"7\"
-o lpi=... # example: \"5\" or " -"\"7\"
-o columns=... # example: \"2\" or \"4\"
Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:
-o " "page-top=... # example: \"72\"" +"example: \"24\"
-o page-bottom=... # " -"example: \"24\"
-o page-left=... # example: \"36\"
" -"-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) " -"On!
ASCII text file printouts can be 'prettyfied' by enabling "
-"this option. If you do so, a header is printed at the top of each page. The "
+" Turn Text Printing with Syntax Highlighting (Prettyprint) On!"
+"b> ASCII text file printouts can be 'prettyfied' by enabling this "
+"option. If you do so, a header is printed at the top of each page. The "
"header contains the page number, job title (usually the filename), and the "
"date. In addition, C and C++ keywords are highlighted, and comment lines "
"are italicized. This prettyprint option is handled by CUPS.
Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " -"commandline job option parameter:
-o prettyprint=false " -"
-o prettyprint=false " +"pre> " msgstr "" #: cups/kptextpage.cpp:167 @@ -1416,19 +1413,19 @@ msgid "" "printoption highlighted above, as laid down in the printer's description " "file (PostScript Printer Description == 'PPD')Select the value you " "want and proceed.
Then use one of the pushbuttons below to leave " -"this dialog:
Note. The number of " -"available job options depends strongly on the actual driver used for your " -"print queue. 'Raw' queues do not have a driver or a PPD. For raw " -"queues this tab page is not loaded by TDEPrint, and thus is not present in " -"the kprinter dialog.
" +"this dialog:Note. The number of available job " +"options depends strongly on the actual driver used for your print queue. " +"'Raw' queues do not have a driver or a PPD. For raw queues this " +"tab page is not loaded by TDEPrint, and thus is not present in the kprinter " +"dialog.
" msgstr "" #: droptionview.cpp:61 @@ -1588,32 +1585,33 @@ msgstr "" #: kpcopiespage.cpp:61 msgid "" "Example: \"4,6,10-13,17,20,23-25\" will " -"print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your " -"document.
Additional hint for power users: " -"This TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o page-ranges=... # example: " -"\"4,6,10-13,17,20,23-25\"
Example: \"4,6,10-13,17,20,23-25\" will "
+"print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your document."
+"p>
Additional hint for power users: This TDEPrint " +"GUI element matches with the CUPS commandline job option parameter: " +"
-o page-ranges=... # example: \"4,6,10-13,17,20,23-25\"" +" " msgstr "" #: kpcopiespage.cpp:75 msgid "" -"
Choose \"All Pages\", \"Even " -"Pages\" or \"Odd Pages\" if you want to print a page selection " -"matching one of these terms. The default is \"All Pages\".
" -"Note: If you combine a selection of a \"Page Range\" with "
-"a \"Page Set\" of \"Odd\" or \"Even\", you will "
-"only get the odd or even pages from the originally selected page range. This "
-"is useful if you odd or even pages from the originally selected page range. "
-"This is useful if you want to print a page range in duplex on a simplex-only "
+" Choose \"All Pages\", \"Even Pages\""
+"em> or \"Odd Pages\" if you want to print a page selection matching "
+"one of these terms. The default is \"All Pages\". Note:"
+"b> If you combine a selection of a \"Page Range\" with a \"Page "
+"Set\" of \"Odd\" or \"Even\", you will only get the "
+"odd or even pages from the originally selected page range. This is useful if "
+"you odd or even pages from the originally selected page range. This is "
+"useful if you want to print a page range in duplex on a simplex-only "
"printer. In this case you can feed the paper to the printer twice; in the "
"first pass, select \"Odd\" or \"Even\" (depending on your printer model), in "
"second pass select the other option. You may need to \"Reverse\" "
-"the output in one of the passes (depending on your printer model). Additional hint for power users: This TDEPrint GUI "
-"element matches with the CUPS commandline job option parameter:
"
-"
"
-" -o page-set=... # example: \"odd\" or \"even\"
Additional hint for power users: This TDEPrint GUI " +"element matches with the CUPS commandline job option parameter: " +"
-o page-set=... # example: \"odd\" or \"even\"" +"" msgstr "" #: kpcopiespage.cpp:98 @@ -1621,12 +1619,12 @@ msgid "" "
The 'Copies' setting defaults to 1.
Additional hint for power users: This TDEPrint GUI " -"element matches with the CUPS commandline job option parameter:
" -" -o copies=... # examples: \"5\" or \"42\".
-o " -"outputorder=... # example: \"reverse\"
-o Collate=... " -" # example: \"true\" or \"false\"
The 'Copies' setting defaults to 1.
" +"Additional hint for power users: This TDEPrint GUI " +"element matches with the CUPS commandline job option parameter: " +"
-o copies=... # examples: \"5\" or \"42\"." msgstr "" #: kpcopiespage.cpp:116 @@ -1635,21 +1633,22 @@ msgid "" "You can increase or decrease the number of printed copies by clicking on the " "up and down arrows. You can also type the figure directly into the box. " "
-o " +"outputorder=... # example: \"reverse\"
-o " +"Collate=... # example: \"true\" or \"false\"
Additional hint for power users: This TDEPrint GUI " -"element matches with the CUPS commandline job option parameter:
" -" -o copies=... # examples: \"5\" or \"42\"" +"element matches with the CUPS commandline job option parameter: " +"
-o copies=... # examples: \"5\" or \"42\"" +"" msgstr "" #: kpcopiespage.cpp:129 msgid "" "
If the \"Collate\" checkbox is " "enabled (default), the output order for multiple copies of a multi-page " -"document will be \"1-2-3-..., 1-2-3-..., 1-2-3-...\".
If the " -"\"Collate\" checkbox is disabled, the output order for multiple " -"copies of a multi-page document will be \"1-1-1-..., 2-2-2-..., " -"3-3-3-...\".
Additional hint for power users: " -"This TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o Collate=... # example: \"true\" or " -"\"false\"
If the " +"\"Collate\" checkbox is disabled, the output order for multiple copies " +"of a multi-page document will be \"1-1-1-..., 2-2-2-..., 3-3-3-...\".
" +"Additional hint for power users: This TDEPrint GUI " +"element matches with the CUPS commandline job option parameter: " +"
-o Collate=... # example: \"true\" or \"false\"" +" " msgstr "" #: kpcopiespage.cpp:143 @@ -1659,12 +1658,12 @@ msgid "" "be \"...-3-2-1, ...-3-2-1, ...-3-2-1\", if you also have enabled " "the \"Collate\" checkbox at the same time (the usual usecase). " "
If the \"Reverse\" checkbox is enabled, the output order for " -"multiple copies of a multi-page document will be \"...-3-3-3, ...-2-2-2, " -"...-1-1-1\", if you have disabled the \"Collate\" checkbox " -"at the same time.
Additional hint for power " -"users: This TDEPrint GUI element matches with the CUPS commandline job " -"option parameter:
-o outputorder=... # example: " -"\"reverse\"" +"multiple copies of a multi-page document will be " +"\"...-3-3-3, ...-2-2-2, ...-1-1-1\", if you have disabled the " +"\"Collate\" checkbox at the same time.
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter:
-o " +"outputorder=... # example: \"reverse\"" msgstr "" #: kpcopiespage.cpp:164 @@ -1735,8 +1734,8 @@ msgstr "" #: kpdriverpage.cpp:48 msgid "" "
This button moves the highlighted " -"filter down in the list of filters, towards the end of the filtering " -"chain..
This field shows which filters are currently " "selected to act as 'pre-filters' for TDEPrint. Pre-filters are processing " "the print files before they are send downstream to your real print " -"subsystem.
The list shown in this field may be empty (default). " -"
The pre-filters act on the printjob in the order they are listed " +"subsystem.
The list shown in this field may be empty (default). " +"p>
The pre-filters act on the printjob in the order they are listed " "(from top to bottom). This is done by acting as a filtering chain " "where the output of one filter acts as input to the next. By putting the " "filters into the wrong order, you can make the filtering chain fail. For " "example: if your file is ASCII text, and you want the output being " "processed by the 'Multipage per Sheet' filter, the first filter must be one " -"that processes ASCII into PostScript.
TDEPrint can utilize " -"any external filtering program which you may find useful through " -"this interface.
TDEPrint ships preconfigured with support for a " +"that processes ASCII into PostScript.
TDEPrint can utilize any" +"em> external filtering program which you may find useful through this " +"interface.
TDEPrint ships preconfigured with support for a " "selection of common filters. These filters however need to be installed " "independently from TDEPrint. These pre-filters work for all print " "subsystems supported by TDEPrint (such as CUPS, LPRng and LPD), because they " "are not depending on these.
.Amongst the pre-configured filters " -"shipping with TDEPrint are:
Please click on the other elements " -"of this dialog to learn more about the TDEPrint pre-filters.
" +"shipping with TDEPrint are:Please click on the other elements of this dialog to " +"learn more about the TDEPrint pre-filters.
" msgstr "" #: kpfilterpage.cpp:125 @@ -1854,8 +1853,8 @@ msgstr "" #: kpfilterpage.cpp:394 msgid "" "The filter chain is wrong. The output format of at least one filter is " -"not supported by its follower. See Filters tab for more " -"information.
" +"not supported by its follower. See Filters tab for more information." +"p>" msgstr "" #: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 @@ -1944,10 +1943,10 @@ msgstr "" #: kpgeneralpage.cpp:124 msgid "" -"\"General\"
This dialog page contains " -"general print job settings. General settings are applicable to most " -"printers, most jobs and most job file types.
To get more specific help, "
-"enable the \"WhatsThis\" cursor and click on any of the text labels or GUI "
+" \"General\" This dialog page contains general"
+"em> print job settings. General settings are applicable to most printers, "
+"most jobs and most job file types. To get more specific help, enable "
+"the \"WhatsThis\" cursor and click on any of the text labels or GUI "
"elements of this dialog.
Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter:
-o " -"InputSlot=... # examples: \"Lower\" or \"LargeCapacity\"" -"
Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " -"commandline job option parameter:
-o " -"orientation-requested=... # examples: \"landscape\" or " -"\"reverse-portrait\"" +"commandline job option parameter:
-o orientation-" +"requested=... # examples: \"landscape\" or \"reverse-portrait\" " +"pre> " msgstr "" #: kpgeneralpage.cpp:192 @@ -2035,9 +2034,9 @@ msgid "" "PNG, JPEG or GIF. Your added banner pages will appear in the drop down menu " "after a restart of CUPS.CUPS comes with a selection of banner " "pages.
Additional hint for power users: This " -"TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o job-sheets=... # examples: \"standard\" " -"or \"topsecret\"" +"TDEPrint GUI element matches with the CUPS commandline job option parameter:" +"-o job-sheets=... # examples: \"standard\" or " +"\"topsecret\"" msgstr "" #: kpgeneralpage.cpp:240 @@ -2172,18 +2171,17 @@ msgid "" "'A0'. [A0 is the same size as 16 sheets of A4, or '84cm x 118.2cm'.] " "Notice, how the little preview window below changes with your " "change of poster size. It indicates to you how many tiles need to be " -"printed to make the poster, given the selected paper size.
" -"Hint: The little preview window below is not just a passive icon. " -"You can click on its individual tiles to select them for printing. To " -"select multiple tiles to be printed at once, you need to " -"'shift-click' on the tiles ('shift-click' means: hold down the " -"[SHIFT]-key on your keyboard and click with the mouse while [SHIFT]-key is " -"held.) The order of your clicking is significant to the order of printing " -"the different tiles. The order of your selection (and for the printed " -"tiles) is indicated by the contents of the text field labelled as 'Tile " -"pages (to be printed):'
Note: By default no tile is selected. " -"Before you can print (a part of) your poster, you must select at least one " -"tile.
" +"printed to make the poster, given the selected paper size.Hint:" +" The little preview window below is not just a passive icon. You can " +"click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' on " +"the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The " +"order of your selection (and for the printed tiles) is indicated by the " +"contents of the text field labelled as 'Tile pages (to be printed):'" +"em>
Note: By default no tile is selected. Before you can print (a " +"part of) your poster, you must select at least one tile.
" msgstr "" #: kpposterpage.cpp:102 @@ -2231,11 +2229,11 @@ msgid "" "Order and number of tile pages to be printed " +"This field " "displays and sets the individual tiles to be printed, as well as the order " "for their printout.
You can file the field with 2 different methods: " -"
- Either use the interactive thumbnail preview above and " -"'[SHIFT]-click' on the tiles.
- Or edit this text field " -"accordingly.
When editing the field, you can use a '3-7' " -"syntax instead of a '3,4,5,6,7' one.
Examples:
" -"\"2,3,7,9,3\"
\"1-3,6,8-11\"
- Either use the interactive thumbnail preview above and '[SHIFT]-" +"click' on the tiles.
- Or edit this text field accordingly.
" +"When editing the field, you can use a '3-7' syntax instead of a " +"'3,4,5,6,7' one.
Examples:
\"2,3,7,9,3\" " +"
\"1-3,6,8-11\" " msgstr "" #: kpposterpage.cpp:154 @@ -2301,12 +2299,12 @@ msgid "" "print 1 page per sheet (the default setting.).Note 2: If you " "select multiple pages per sheet here, the scaling and re-arranging is done " "by your printing system.
Note 3, regarding \"Other\": You cannot " -"really select Other as the number of pages to print on one " -"sheet.\"Other\" is checkmarked here for information purposes only.
To " -"select 8, 9, 16 or other numbers of pages per sheet:
" +"really select Other as the number of pages to print on one sheet." +"\"Other\" is checkmarked here for information purposes only.
- go to the " -"tab headlined \"Filter\"
- enable the Multiple Pages per " -"Sheet filter
- and configure it (bottom-most button on the " -"right of the \"Filters\" tab).
To select " +"8, 9, 16 or other numbers of pages per sheet:
" msgstr "" #: kpqtpage.cpp:102 @@ -2352,8 +2350,8 @@ msgstr "" #: kprintdialog.cpp:102 msgid "" -"
- go to the tab " +"headlined \"Filter\"
- enable the Multiple Pages per Sheet " +"filter
- and configure it (bottom-most button on the right of the " +"\"Filters\" tab).
Printer Type: The Type indicates your printer type. " -" " +"Printer Type: The Type indicates your printer type. " +"qt>" msgstr "" #: kprintdialog.cpp:104 @@ -2401,27 +2399,26 @@ msgstr "" #: kprintdialog.cpp:141 msgid "" " " msgstr "" #: kprintdialog.cpp:154 msgid "" "Selective View on List of Printers: " +"list of visible printers to a shorter, more convenient, pre-defined list." +"p>This button reduces the " -"list of visible printers to a shorter, more convenient, pre-defined " -"list.
This is particularly useful in enterprise environments with " -"lots of printers. The default is to show all printers.
To " -"create a personal 'selective view list', click on the 'System " -"Options' button at the bottom of this dialog. Then, in the new dialog, " -"select 'Filter' (left column in the TDE Print " -"Configuration dialog) and setup your selection..
Warning: " -"Clicking this button without prior creation of a personal 'selective " -"view list' will make all printers dissappear from the view. (To " -"re-enable all printers, just click this button again.)
This is particularly useful in enterprise environments with lots of " +"printers. The default is to show all printers.
To create a " +"personal 'selective view list', click on the 'System Options'" +"em> button at the bottom of this dialog. Then, in the new dialog, select " +"'Filter' (left column in the TDE Print Configuration " +"dialog) and setup your selection..
Warning: Clicking this " +"button without prior creation of a personal 'selective view list' " +"will make all printers dissappear from the view. (To re-enable all " +"printers, just click this button again.)
TDE Add Printer Wizard .This button starts the TDE Add " -"Printer Wizard.
Use the Wizard (with \"CUPS\" or " -"\"RLPR\") to add locally defined printers to your system.
" +"Printer WizardUse the Wizard (with \"CUPS\" or " +"\"RLPR\") to add locally defined printers to your system.
" "Note: The TDE Add Printer Wizard does not work, " -"and this button is disabled if you use \"Generic LPD\", " -"\"LPRng\", or \"Print Through an External Program\".) " -"
" +"and this button is disabled if you use \"Generic LPD\", \"LPRng" +"\", or \"Print Through an External Program\".) " msgstr "" #: kprintdialog.cpp:163 @@ -2442,15 +2439,15 @@ msgid "" "System Options: " +"for printing?This button starts a new dialog where you " "can adjust various settings of your printing system. Amongst them:
and many more....
- " "Should \tDE applications embed all fonts into the PostScript they generate " -"for printing?
- Should TDE use an external PostScript viewer like " -"gv for print page previews?
- Should TDEPrint use a local or a " -"remote CUPS server?,
" "This is especially useful, if you need to test various print settings (like " "color matching for an inkjet printer) or if you want to send your job to " -"multiple printers (one after the other) to have it finished more " -"quickly.
" +"multiple printers (one after the other) to have it finished more quickly." +"p> " msgstr "" #: kprintdialog.cpp:206 @@ -2483,8 +2480,8 @@ msgid "" "your file will be saved if you decide to \"Print to File\" your job, using " "one of the TDE Special Printers named \"Print to File " "(PostScript)\" or \"Print to File (PDF)\". Choose a name and location that " -"suits your need by using the button and/or editing the line on the right. " -"" +"suits your need by using the button and/or editing the line on the right. " +"qt>" msgstr "" #: kprintdialog.cpp:214 @@ -2528,9 +2525,9 @@ msgstr "" msgid "" "Note: (Button is only visible if the checkbox " -"for System Options --> General --> " -"Miscellaneous: \"Defaults to the last printer used in the " -"application\" is disabled.)
%1"
msgstr ""
#: kprinterimpl.cpp:156
@@ -2698,10 +2695,9 @@ msgstr ""
#: kprinterimpl.cpp:325
msgid ""
-"
Unable to perform the requested page selection. The filter " -"psselect cannot be inserted in the current filter chain. See " -"Filter tab in the printer properties dialog for further " -"information.
" +"Unable to perform the requested page selection. The filter psselect" +"b> cannot be inserted in the current filter chain. See Filter tab in " +"the printer properties dialog for further information.
" msgstr "" #: kprinterimpl.cpp:355 @@ -2717,9 +2713,9 @@ msgstr "" #: kprinterimpl.cpp:385 msgid "" "The MIME type %1 is not supported as input of the filter chain (this may " -"happen with non-CUPS spoolers when performing page selection on a " -"non-PostScript file). Do you want TDE to convert the file to a supported " -"format?" +"happen with non-CUPS spoolers when performing page selection on a non-" +"PostScript file). Do you want TDE to convert the file to a supported format?" +"" msgstr "" #: kprinterimpl.cpp:389 kprinterimpl.cpp:509 @@ -2744,8 +2740,8 @@ msgstr "" #: kprinterimpl.cpp:423 msgid "" -"%1
%1" +"p>
The default mimetype for the output file (e.g. " -"application/postscript).
" +"The default mimetype for the output file (e.g. application/postscript)."
+"p>"
msgstr ""
#: management/kmspecialprinterdlg.cpp:121
@@ -4217,8 +4211,8 @@ msgstr ""
#: management/kmwbackend.cpp:123
msgid ""
" Shared Windows printer Use this for a printer installed on a "
-"Windows server and shared on the network using the SMB protocol "
-"(samba).
This backend may require a login/password to work properly. Select the " -"type of access to use and fill in the login and password entries if " -"needed.
" +"type of access to use and fill in the login and password entries if needed." +"p>" msgstr "" #: management/kmwpassword.cpp:49 @@ -4814,11 +4808,10 @@ msgstr "" msgid "" "The full command line to execute the associated underlying utility. This " "command line is based on a mechanism of tags that are replaced at run-time. " -"The supported tags are:Note:
This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript " -"or PDF file, which in most cases have their margins hardcoded " -"internally.Additional hint for power users: " -"This TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o page-left=... # use values from \"0\" or " -"higher. \"72\" is equal to 1 inch." +"or PDF file, which in most cases have their margins hardcoded internally." +"p>
Additional hint for power users: This TDEPrint " +"GUI element matches with the CUPS commandline job option parameter: " +"
-o page-left=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" #: marginwidget.cpp:95 @@ -5040,11 +5033,11 @@ msgid "" "
Note:
This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript " -"or PDF file, which in most cases have their margins hardcoded " -"internally.Additional hint for power users: " -"This TDEPrint GUI element matches with the CUPS commandline job option " -"parameter:
-o page-right=... # use values from \"0\" or " -"higher. \"72\" is equal to 1 inch." +"or PDF file, which in most cases have their margins hardcoded internally." +"p>
Additional hint for power users: This TDEPrint " +"GUI element matches with the CUPS commandline job option parameter: " +"
-o page-right=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" #: marginwidget.cpp:114 @@ -5063,9 +5056,9 @@ msgid "" "margins in preview frame with mouse.
This button tries to open the highlighted " -"file, so you can view or edit it before you send it to the printing " -"system.
If you open files, TDEPrint will use the application matching " -"the MIME type of the file.
If you open files, TDEPrint will use the application matching the MIME " +"type of the file.
" msgstr "" #: tdefilelist.cpp:82 @@ -5234,8 +5227,8 @@ msgid "" "for printing. You can see the file name(s), file path(s) and the file (MIME) " "type(s) as determined by TDEPrint. You may re-arrange the initial order of " "the list with the help of the arrow buttons on the right.The files " -"will be printed as a single job, in the same order as displayed in the " -"list.
Note: You can select multiple files. The files may be in " +"will be printed as a single job, in the same order as displayed in the list." +"
Note: You can select multiple files. The files may be in "
"multiple locations. The files may be of multiple MIME types. The buttons on "
"the right side let you add more files, remove already selected files from "
"the list, re-order the list (by moving files up or down), and open files. "
diff --git a/template/messages/tdelibs/tdetexteditor_autobookmarker.pot b/template/messages/tdelibs/tdetexteditor_autobookmarker.pot
index 51c9bd39b97..218c4db7219 100644
--- a/template/messages/tdelibs/tdetexteditor_autobookmarker.pot
+++ b/template/messages/tdelibs/tdetexteditor_autobookmarker.pot
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2020-05-11 04:01+0200\n"
+"POT-Creation-Date: 2021-07-07 18:16+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME If enabled, the pattern matching will be case sensitive, otherwise "
-"not. If enabled, the pattern matching will be case sensitive, otherwise not."
+"p>"
msgstr ""
#: autobookmarker.cpp:304
--
cgit v1.2.1