# translation of ksysguard.po to Bosanski
# translation of ksysguard.po to Bosnian
# KTranslator Generated File
# Copyright (C) 1998,2004, 2005, 2006 Free Software Foundation, Inc.
# Vedran Ljubovic <vljubovic@smartnet.ba>, 2002,2004, 2005, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: ksysguard\n"
"POT-Creation-Date: 2018-12-06 20:16+0100\n"
"PO-Revision-Date: 2006-02-11 20:01+0100\n"
"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
"Language-Team: Bosnian <lokal@linux.org.ba>\n"
"Language: bs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"

#: SystemLoad.sgrd:5
msgid "CPU Load"
msgstr "CPU Load"

#: SystemLoad.sgrd:10
msgid "Load Average (1 min)"
msgstr "Prosječno opterećenje (1 min)"

#: SystemLoad.sgrd:13
msgid "Physical Memory"
msgstr "Fizička memorija"

#: SystemLoad.sgrd:21
msgid "Swap Memory"
msgstr "Swap memorija"

#: KSysGuardApplet.xml:5
msgid "CPU"
msgstr "CPU"

#: KSysGuardApplet.xml:10
msgid "Mem"
msgstr "Mem"

#~ msgid "Select Display Type"
#~ msgstr "Odaberite vrstu pokazivača"

#~ msgid "&Signal Plotter"
#~ msgstr "&Ploter signala"

#~ msgid "&Multimeter"
#~ msgstr "&Multimetar"

#~ msgid "&Dancing Bars"
#~ msgstr "P&lešuće trake"

#~ msgid ""
#~ "The KSysGuard applet does not support displaying of this type of sensor. "
#~ "Please choose another sensor."
#~ msgstr ""
#~ "KSysGuard ne podržava prikaz ove vrste senzora. Molim odaberite drugi "
#~ "senzor."

#~ msgid "Cannot open the file %1."
#~ msgstr "Ne mogu otvoriti datoteku %1."

#~ msgid "The file %1 does not contain valid XML."
#~ msgstr "Datoteka %1 ne sadrži ispravan XML"

#~ msgid ""
#~ "The file %1 does not contain a valid applet definition, which must have a "
#~ "document type 'KSysGuardApplet'."
#~ msgstr ""
#~ "Datoteka %1 ne sadrži ispravan opis applet-a, koji mora biti dokument "
#~ "tipa 'KSysGuardApplet'."

#~ msgid "Cannot save file %1"
#~ msgstr "Ne mogu snimiti datoteku %1"

#~ msgid "Drag sensors from the TDE System Guard into this cell."
#~ msgstr "Dovucite senzore sa TDE System Guard-a na ovo mjesto."

#~ msgid "Multimeter Settings"
#~ msgstr "Postavke multimetra"

#~ msgid "Name"
#~ msgstr "Ime"

#~ msgid "PID"
#~ msgstr "PID"

#~ msgid "PPID"
#~ msgstr "PPID"

#~ msgid "UID"
#~ msgstr "UID"

#~ msgid "GID"
#~ msgstr "GID"

#~ msgid "Status"
#~ msgstr "Status"

#~ msgid "User%"
#~ msgstr "Korisnik%"

#~ msgid "System%"
#~ msgstr "Sistem%"

#~ msgid "Nice"
#~ msgstr "Nice"

#~ msgid "VmSize"
#~ msgstr "VmSize"

#~ msgid "VmRss"
#~ msgstr "VmRss"

#~ msgid "Login"
#~ msgstr "Login"

#~ msgid "Command"
#~ msgstr "Naredba"

#~ msgid "All Processes"
#~ msgstr "Svi procesi"

#~ msgid "System Processes"
#~ msgstr "Sistemski procesi"

#~ msgid "User Processes"
#~ msgstr "Korisnički procesi"

#~ msgid "Own Processes"
#~ msgstr "Vlastiti procesi"

#~ msgid "&Tree"
#~ msgstr "S&tablo"

#~ msgid "&Refresh"
#~ msgstr "&Osvježi"

#~ msgid "&Kill"
#~ msgstr "&Ubij"

#~ msgid "%1: Running Processes"
#~ msgstr "%1: pokrenutih procesa"

#~ msgid "You need to select a process first."
#~ msgstr "Prvo morate izabrati proces."

#~ msgid ""
#~ "_n: Do you want to kill the selected process?\n"
#~ "Do you want to kill the %n selected processes?"
#~ msgstr ""
#~ "Da li želite ubiti %n izabrani proces?\n"
#~ "Da li želite ubiti %n izabrana procesa?\n"
#~ "Da li želite ubiti %n izabranih procesa?"

#~ msgid "Kill Process"
#~ msgstr "Ubij proces"

#~ msgid "Kill"
#~ msgstr "Ubij"

#~ msgid "Do not ask again"
#~ msgstr "Ne pitaj više"

#~ msgid "Error while attempting to kill process %1."
#~ msgstr "Greška pri pokušaju ubijanja procesa %1."

#~ msgid "Insufficient permissions to kill process %1."
#~ msgstr "Nedovoljne privilegije za ubijanje procesa %1."

#~ msgid "Process %1 has already disappeared."
#~ msgstr "Proces %1 je već nestao."

#~ msgid "Invalid Signal."
#~ msgstr "Neispravan signal."

#~ msgid "Error while attempting to renice process %1."
#~ msgstr "Greška pri pokušaju renice-a procesa %1."

#~ msgid "Insufficient permissions to renice process %1."
#~ msgstr "Nedovoljne privilegije za renice procesa %1."

#~ msgid "Invalid argument."
#~ msgstr "Neispravan argument."

#~ msgid "It is impossible to connect to '%1'."
#~ msgstr "Nije moguće spojiti se na '%1'."

#~ msgid "Launch &System Guard"
#~ msgstr "Pokreni &System Guard"

#~ msgid "&Properties"
#~ msgstr "&Postavke"

#~ msgid "&Remove Display"
#~ msgstr "&Ukloni pokazivač"

#~ msgid "&Setup Update Interval..."
#~ msgstr "&Podesi vrijeme osvježavanja..."

#~ msgid "&Continue Update"
#~ msgstr "&Nastavi obnavljanje"

#~ msgid "P&ause Update"
#~ msgstr "P&auziraj obnavljanje"

#~ msgid ""
#~ "<qt><p>This is a sensor display. To customize a sensor display click and "
#~ "hold the right mouse button on either the frame or the display box and "
#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
#~ "i> to delete the display from the worksheet.</p>%1</qt>"
#~ msgstr ""
#~ "<qt><p>Ovo je prikaz senzora. Da biste podesili prikaz senzora, kliknite "
#~ "i držite desno dugme miša na ili okvir ili kocku sa prikazom i odaberite "
#~ "stavku <i>Osobine</i> sa menija. Izaberite <i>Ukloni</i> ako želite "
#~ "obrisati prikaz sa radnog lista.</p>%1</qt>"

#~ msgid "Drop Sensor Here"
#~ msgstr "Ovdje ispustite senzor"

#~ msgid ""
#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
#~ "Browser and drop it here. A sensor display will appear that allows you to "
#~ "monitor the values of the sensor over time."
#~ msgstr ""
#~ "Ovo je slobodan prostor na radnom listu. Povucite senzor sa Preglednika "
#~ "senzora i ispustite ga ovdje. Pojaviće se pokazivač senzora pomoću kojeg "
#~ "možete pratiti vrijednosti senzora kroz vrijeme."

#~ msgid "Sensor Logger Settings"
#~ msgstr "Postavke dnevnika senzora"

#~ msgid "Logging"
#~ msgstr "Vođenje dnevnika"

#~ msgid "Timer Interval"
#~ msgstr "Vremenski razmak"

#~ msgid "Sensor Name"
#~ msgstr "Ime senzora"

#~ msgid "Host Name"
#~ msgstr "Ime računara"

#~ msgid "Log File"
#~ msgstr "Dnevnik"

#~ msgid "Sensor Logger"
#~ msgstr "Dnevnik senzora"

#~ msgid "&Remove Sensor"
#~ msgstr "&Ukloni senzor"

#~ msgid "&Edit Sensor..."
#~ msgstr "&Izmjeni senzor..."

#~ msgid "St&op Logging"
#~ msgstr "Prekini &zapisivanje u dnevnk"

#~ msgid "S&tart Logging"
#~ msgstr "Počni &vođenje dnevnika"

#~ msgid ""
#~ "_: process status\n"
#~ "running"
#~ msgstr "aktivan"

#~ msgid ""
#~ "_: process status\n"
#~ "sleeping"
#~ msgstr "spava"

#~ msgid ""
#~ "_: process status\n"
#~ "disk sleep"
#~ msgstr "spava na disku"

#~ msgid ""
#~ "_: process status\n"
#~ "zombie"
#~ msgstr "zombi"

#~ msgid ""
#~ "_: process status\n"
#~ "stopped"
#~ msgstr "zaustavljen"

#~ msgid ""
#~ "_: process status\n"
#~ "paging"
#~ msgstr "na stranici"

#~ msgid ""
#~ "_: process status\n"
#~ "idle"
#~ msgstr "čeka"

#~ msgid "Remove Column"
#~ msgstr "Ukloni kolonu"

#~ msgid "Add Column"
#~ msgstr "Dodaj kolonu"

#~ msgid "Help on Column"
#~ msgstr "Pomoć o koloni"

#~ msgid "Hide Column"
#~ msgstr "Sakrij kolonu"

#~ msgid "Show Column"
#~ msgstr "Prikaži kolonu"

#~ msgid "Select All Processes"
#~ msgstr "Izaberi sve procese"

#~ msgid "Unselect All Processes"
#~ msgstr "Odznači sve procese"

#~ msgid "Select All Child Processes"
#~ msgstr "Izaberi sve procese - djecu"

#~ msgid "Unselect All Child Processes"
#~ msgstr "Odznači sve procese - djecu"

#~ msgid "SIGABRT"
#~ msgstr "SIGABRT"

#~ msgid "SIGALRM"
#~ msgstr "SIGALRM"

#~ msgid "SIGCHLD"
#~ msgstr "SIGCHLD"

#~ msgid "SIGCONT"
#~ msgstr "SIGCONT"

#~ msgid "SIGFPE"
#~ msgstr "SIGFPE"

#~ msgid "SIGHUP"
#~ msgstr "SIGHUP"

#~ msgid "SIGILL"
#~ msgstr "SIGILL"

#~ msgid "SIGINT"
#~ msgstr "SIGINT"

#~ msgid "SIGKILL"
#~ msgstr "SIGKILL"

#~ msgid "SIGPIPE"
#~ msgstr "SIGPIPE"

#~ msgid "SIGQUIT"
#~ msgstr "SIGQUIT"

#~ msgid "SIGSEGV"
#~ msgstr "SIGSEGV"

#~ msgid "SIGSTOP"
#~ msgstr "SIGSTOP"

#~ msgid "SIGTERM"
#~ msgstr "SIGTERM"

#~ msgid "SIGTSTP"
#~ msgstr "SIGTSTP"

#~ msgid "SIGTTIN"
#~ msgstr "SIGTTIN"

#~ msgid "SIGTTOU"
#~ msgstr "SIGTTOU"

#~ msgid "SIGUSR1"
#~ msgstr "SIGUSR1"

#~ msgid "SIGUSR2"
#~ msgstr "SIGUSR2"

#~ msgid "Send Signal"
#~ msgstr "Pošalji signal"

#~ msgid "Renice Process..."
#~ msgstr "Renice procesa..."

#~ msgid ""
#~ "_n: Do you really want to send signal %1 to the selected process?\n"
#~ "Do you really want to send signal %1 to the %n selected processes?"
#~ msgstr ""
#~ "Da li stvarno želite poslati signal %1 za %n izabrani proces?\n"
#~ "Da li stvarno želite poslati signal %1 za %n izabrana procesa?\n"
#~ "Da li stvarno želite poslati signal %1 za %n izabranih procesa?"

#~ msgid "Send"
#~ msgstr "Pošalji"

#~ msgid "Renice Process"
#~ msgstr "Renice procesa"

#~ msgid ""
#~ "You are about to change the scheduling priority of\n"
#~ "process %1. Be aware that only the Superuser (root)\n"
#~ "can decrease the nice level of a process. The lower\n"
#~ "the number is the higher the priority.\n"
#~ "\n"
#~ "Please enter the desired nice level:"
#~ msgstr ""
#~ "Upravo ćete promjeniti raspored prioriteta procesa\n"
#~ "%1. Imajte na umu da samo administrator (root) može\n"
#~ "smanjiti 'nice' nivo procesa. Što je niži 'nice', to je veći \n"
#~ "prioritet procesa.\n"
#~ "\n"
#~ "Molim unesite željeni 'nice' nivo:"

#~ msgid "Foreground color:"
#~ msgstr "Boja teksta:"

#~ msgid "Background color:"
#~ msgstr "Boja pozadine:"

#~ msgid "Edit BarGraph Preferences"
#~ msgstr "Izmjeni postavke bar grafa"

#~ msgid "Range"
#~ msgstr "Opseg"

#~ msgid "Title"
#~ msgstr "Naslov"

#~ msgid "Enter the title of the display here."
#~ msgstr "Unesite naslov pokazivača."

#~ msgid "Display Range"
#~ msgstr "Opseg pokazivača"

#~ msgid "Minimum value:"
#~ msgstr "Minimalna vrijednost:"

#~ msgid ""
#~ "Enter the minimum value for the display here. If both values are 0, "
#~ "automatic range detection is enabled."
#~ msgstr ""
#~ "Unesite najmanju vrijednost pokazivača. Ako su obje vrijednosti 0, tada "
#~ "će se automatski određivati opseg."

#~ msgid "Maximum value:"
#~ msgstr "Maksimalna vrijednost:"

#~ msgid ""
#~ "Enter the maximum value for the display here. If both values are 0, "
#~ "automatic range detection is enabled."
#~ msgstr ""
#~ "Unesite najveću vrijednost pokazivača. Ako su obje vrijednosti 0, tada će "
#~ "se automatski određivati opseg."

#~ msgid "Alarms"
#~ msgstr "Alarmi"

#~ msgid "Alarm for Minimum Value"
#~ msgstr "Alarm za minimalnu vrijednost"

#~ msgid "Enable alarm"
#~ msgstr "Uključi alarm"

#~ msgid "Enable the minimum value alarm."
#~ msgstr "Uključi alarm za najmanju vrijedost."

#~ msgid "Lower limit:"
#~ msgstr "Donja granica:"

#~ msgid "Alarm for Maximum Value"
#~ msgstr "Alarm za maksimalnu vrijednost"

#~ msgid "Enable the maximum value alarm."
#~ msgstr "Uključi alarm za najveću vrijedost."

#~ msgid "Upper limit:"
#~ msgstr "Gornja granica:"

#~ msgid "Look"
#~ msgstr "Pogled"

#~ msgid "Normal bar color:"
#~ msgstr "Obična boja trake:"

#~ msgid "Out-of-range color:"
#~ msgstr "Boja za prekoračenje:"

#~ msgid "Font size:"
#~ msgstr "Veličina slova:"

#~ msgid ""
#~ "This determines the size of the font used to print a label underneath the "
#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
#~ "is advisable to use a small font size here."
#~ msgstr ""
#~ "Ovdje se određuje veličina fonta kojim će se ispisivati oznake ispod "
#~ "traka. Veličina trake će biti smanjena ukoliko je tekst prevelik, pa je "
#~ "bolje ne pretjerati s veličinom slova."

#~ msgid "Sensors"
#~ msgstr "Senzori"

#~ msgid "Host"
#~ msgstr "Računar"

#~ msgid "Sensor"
#~ msgstr "Senzor"

#~ msgid "Label"
#~ msgstr "Oznaka"

#~ msgid "Unit"
#~ msgstr "Jedinica"

#~ msgid "Edit..."
#~ msgstr "Izmjeni..."

#~ msgid "Push this button to configure the label."
#~ msgstr "Pritnisnite ovo dugme da podesite naslov."

#~ msgid "Push this button to delete the sensor."
#~ msgstr "Pritnisnite ovo dugme za brisanje senzora."

#~ msgid "Label of Bar Graph"
#~ msgstr "Naslov bar grafa"

#~ msgid "Enter new label:"
#~ msgstr "Unesite novu oznaku:"

#~ msgid "Signal Plotter Settings"
#~ msgstr "Postavke plotera signala"

#~ msgid "Style"
#~ msgstr "Stil"

#~ msgid "Title:"
#~ msgstr "Naslov:"

#~ msgid "Graph Drawing Style"
#~ msgstr "Stil crtanja krivulje"

#~ msgid "Basic polygons"
#~ msgstr "Osnovni poligoni"

#~ msgid "Original - single line per data point"
#~ msgstr "Original - jedna linija za jednu tačku"

#~ msgid "Scales"
#~ msgstr "Stepenice"

#~ msgid "Vertical Scale"
#~ msgstr "Uspravna skala"

#~ msgid "Automatic range detection"
#~ msgstr "Automatsko određivanje opsega"

#~ msgid ""
#~ "Check this box if you want the display range to adapt dynamically to the "
#~ "currently displayed values; if you do not check this, you have to specify "
#~ "the range you want in the fields below."
#~ msgstr ""
#~ "Uključite ovu opciju ako želite automatsko prilagođavanje opsega prema "
#~ "trenutnim vrijednostima, u suprotnom trebate unijeti opseg koji želite u "
#~ "poljima ispod."

#~ msgid "Horizontal Scale"
#~ msgstr "Vodoravna skala"

#~ msgid "pixel(s) per time period"
#~ msgstr "piksela po jedinici vremena"

#~ msgid "Grid"
#~ msgstr "Mreža"

#~ msgid "Lines"
#~ msgstr "Linije"

#~ msgid "Vertical lines"
#~ msgstr "Uspravne linije"

#~ msgid ""
#~ "Check this to activate the vertical lines if display is large enough."
#~ msgstr ""
#~ "Uključite ovo da aktivirate vertikalne linije ako je prikaz dovoljno "
#~ "velik."

#~ msgid "Distance:"
#~ msgstr "Razmak:"

#~ msgid "Enter the distance between two vertical lines here."
#~ msgstr "Unesite razmak između dvije uspravne linije."

#~ msgid "Vertical lines scroll"
#~ msgstr "Skrolovanje uspravnih linija"

#~ msgid "Horizontal lines"
#~ msgstr "Vodoravne linije"

#~ msgid "Check this to enable horizontal lines if display is large enough."
#~ msgstr ""
#~ "Ovdje možete omogućiti prikaz vodoravnim trakama ako je prikaz dovoljno "
#~ "velik."

#~ msgid "Count:"
#~ msgstr "Broj:"

#~ msgid "Enter the number of horizontal lines here."
#~ msgstr "Unesite broj vodoravnih linija."

#~ msgid "Text"
#~ msgstr "Tekst"

#~ msgid "Labels"
#~ msgstr "Oznake"

#~ msgid ""
#~ "Check this box if horizontal lines should be decorated with the values "
#~ "they mark."
#~ msgstr ""
#~ "Ovdje možete omogućiti hoće li vodoravne linije biti ukrašene "
#~ "vrijednostima koje pokazuju."

#~ msgid "Top bar"
#~ msgstr " Gornja traka"

#~ msgid ""
#~ "Check this to active the display title bar. This is probably only useful "
#~ "for applet displays. The bar is only visible if the display is large "
#~ "enough."
#~ msgstr ""
#~ "Ovdje možete uključiti traku s nazivom, što je vjerovatno korisno smo kod "
#~ "prikazivanja appleta, jer je traka vidljiva samo ako je prikaz dovoljno "
#~ "velik."

#~ msgid "Colors"
#~ msgstr "Boje"

#~ msgid "Vertical lines:"
#~ msgstr "Uspravne linije:"

#~ msgid "Horizontal lines:"
#~ msgstr "Vodoravne linije:"

#~ msgid "Background:"
#~ msgstr "Pozadina:"

#~ msgid "Set Color..."
#~ msgstr "Podesi boju..."

#~ msgid ""
#~ "Push this button to configure the color of the sensor in the diagram."
#~ msgstr "Pritisnite ovo dugme za podešavanje boje senzora u dijagramu."

#~ msgid "Move Up"
#~ msgstr "Pomakni gore"

#~ msgid "Move Down"
#~ msgstr "Pomakni dole"

#~ msgid "List View Settings"
#~ msgstr "Postavke prikaza liste"

#, fuzzy
#~ msgid "System Guard Settings"
#~ msgstr "Postavke KSysguard appleta"

#~ msgid "Number of displays:"
#~ msgstr "Broj pokazivača:"

#~ msgid "Size ratio:"
#~ msgstr "Omjer veličine:"

#~ msgid "%"
#~ msgstr "%"

#~ msgid "Update interval:"
#~ msgstr "Vrijeme osvježavanja:"

#~ msgid " sec"
#~ msgstr " sek"

#~ msgid ""
#~ "The file %1 does not contain a valid worksheet definition, which must "
#~ "have a document type 'KSysGuardWorkSheet'."
#~ msgstr ""
#~ "Datoteka %1 ne sadrži ispravan opis radnog lista, jer on mora biti "
#~ "dokument tipa 'KSysGuardWorkSheet'."

#~ msgid "The file %1 has an invalid worksheet size."
#~ msgstr "Datoteka %1 ima neispravnu veličinu radnog lista."

#~ msgid "The clipboard does not contain a valid display description."
#~ msgstr "Clipboard ne sadrži ispravan opis pokazivača."

#~ msgid "&BarGraph"
#~ msgstr "&BarGraph"

#~ msgid "S&ensorLogger"
#~ msgstr "Dnevnik s&enzora"

#~ msgid "Log File Settings"
#~ msgstr "Postavke datoteke s dnevnikom"

#~ msgid "Select Font..."
#~ msgstr "Izaberi font..."

#~ msgid "Filter"
#~ msgstr "Filter"

#~ msgid "&Add"
#~ msgstr "&Dodaj"

#~ msgid "&Change"
#~ msgstr "&Promjeni"

#~ msgid "Text color:"
#~ msgstr "Boja teksta:"

#~ msgid "Alarm color:"
#~ msgstr "Boja kod alarma:"

#~ msgid "&Show unit"
#~ msgstr "P&rikaži jedinice"

#~ msgid "Enable this to append the unit to the title of the display."
#~ msgstr "Ovdje možete omogućiti ispis jedinice na naslovu prikaza."

#~ msgid "E&nable alarm"
#~ msgstr "U&ključi alarm"

#~ msgid "&Enable alarm"
#~ msgstr "&Uključi alarm"

#~ msgid "Normal digit color:"
#~ msgstr "Obična boja cifara:"

#~ msgid "Alarm digit color:"
#~ msgstr "Boja cifara kod alarma:"

#~ msgid "Grid color:"
#~ msgstr "Boja mreže:"

#~ msgid ""
#~ "_: NAME OF TRANSLATORS\n"
#~ "Your names"
#~ msgstr "Vedran Ljubović"

#~ msgid ""
#~ "_: EMAIL OF TRANSLATORS\n"
#~ "Your emails"
#~ msgstr "vljubovic@smartnet.ba"

#~ msgid "Idle Load"
#~ msgstr "Idle Load"

#~ msgid "System Load"
#~ msgstr "System Load"

#~ msgid "Nice Load"
#~ msgstr "Nice Load"

#~ msgid "User Load"
#~ msgstr "User Load"

#~ msgid "Memory"
#~ msgstr "Memorija"

#~ msgid "Cached Memory"
#~ msgstr "Cached memorija"

#~ msgid "Buffered Memory"
#~ msgstr "Buffered memorija"

#~ msgid "Used Memory"
#~ msgstr "Upotrijebljena memorija"

#~ msgid "Application Memory"
#~ msgstr "Memorija za aplikacije"

#~ msgid "Free Memory"
#~ msgstr "Slobodna memorija"

#~ msgid "Process Count"
#~ msgstr "Brojač procesa"

#~ msgid "Process Controller"
#~ msgstr "Kontroler procesa"

#~ msgid "Disk Throughput"
#~ msgstr "Propusnost diska"

#~ msgid ""
#~ "_: CPU Load\n"
#~ "Load"
#~ msgstr "Opterećenje"

#~ msgid "Total Accesses"
#~ msgstr "Ukupno pristupa"

#~ msgid "Read Accesses"
#~ msgstr "Pristupa za čitanje"

#~ msgid "Write Accesses"
#~ msgstr "Pristupa za pisanje"

#~ msgid "Read Data"
#~ msgstr "Čitanje podataka"

#~ msgid "Write Data"
#~ msgstr "Pisanje podataka"

#~ msgid "Pages In"
#~ msgstr "Ulaznih stranica"

#~ msgid "Pages Out"
#~ msgstr "Izlaznih stranica"

#~ msgid "Context Switches"
#~ msgstr "Context Switches"

#~ msgid "Network"
#~ msgstr "Mreža"

#~ msgid "Interfaces"
#~ msgstr "Interfejsi"

#~ msgid "Receiver"
#~ msgstr "Prijemnik"

#~ msgid "Transmitter"
#~ msgstr "Predajnik"

#~ msgid "Data"
#~ msgstr "Podaci"

#~ msgid "Compressed Packets"
#~ msgstr "Kompresovani paketi"

#~ msgid "Dropped Packets"
#~ msgstr "Ispušteni paketi"

#~ msgid "Errors"
#~ msgstr "Greške"

#~ msgid "FIFO Overruns"
#~ msgstr "FIFO Overruns"

#~ msgid "Frame Errors"
#~ msgstr "Frame Errors"

#~ msgid "Multicast"
#~ msgstr "Multicast"

#~ msgid "Packets"
#~ msgstr "Paketi"

#~ msgid "Carrier"
#~ msgstr "Carrier"

#~ msgid "Collisions"
#~ msgstr "Sudari"

#~ msgid "Sockets"
#~ msgstr "Sockets"

#~ msgid "Total Number"
#~ msgstr "Ukupan broj"

#~ msgid "Table"
#~ msgstr "Tabela"

#~ msgid "Advanced Power Management"
#~ msgstr "Napredno upravljanje energijom"

#~ msgid "ACPI"
#~ msgstr "ACPI"

#~ msgid "Thermal Zone"
#~ msgstr "Termalna zona"

#~ msgid "Temperature"
#~ msgstr "Temperatura"

#~ msgid "Fan"
#~ msgstr "Ventilator"

#~ msgid "State"
#~ msgstr "Status"

#~ msgid "Battery"
#~ msgstr "Baterija"

#~ msgid "Battery Charge"
#~ msgstr "Punjenje baterije"

#~ msgid "Battery Usage"
#~ msgstr "Upotreba baterije"

#~ msgid "Remaining Time"
#~ msgstr "Preostalo vrijeme"

#~ msgid "Interrupts"
#~ msgstr "Prekidi"

#~ msgid "Load Average (5 min)"
#~ msgstr "Prosječno opterećenje (5 min)"

#~ msgid "Load Average (15 min)"
#~ msgstr "Prosječno opterećenje (15 min)"

#~ msgid "Clock Frequency"
#~ msgstr "Frekvencija sata"

#~ msgid "Hardware Sensors"
#~ msgstr "Hardverski senzori"

#~ msgid "Partition Usage"
#~ msgstr "Iskorištenost particija"

#~ msgid "Used Space"
#~ msgstr "Iskorišteni prostor"

#~ msgid "Free Space"
#~ msgstr "Slobodan prostor"

#~ msgid "Fill Level"
#~ msgstr "Nivo popunjenosti"

#~ msgid "CPU%1"
#~ msgstr "CPU%1"

#~ msgid "Disk%1"
#~ msgstr "Disk%1"

#~ msgid "Fan%1"
#~ msgstr "Ventilator%1"

#~ msgid "Temperature%1"
#~ msgstr "Temperatura%1"

#~ msgid "Total"
#~ msgstr "Ukupno"

#~ msgid "Int%1"
#~ msgstr "Int%1"

#~ msgid ""
#~ "_: the unit 1 per second\n"
#~ "1/s"
#~ msgstr "1/s"

#~ msgid "kBytes"
#~ msgstr "kBajta"

#~ msgid ""
#~ "_: the unit minutes\n"
#~ "min"
#~ msgstr "min"

#~ msgid ""
#~ "_: the frequency unit\n"
#~ "MHz"
#~ msgstr "MHz"

#~ msgid "Integer Value"
#~ msgstr "Cjelobrojna vrijednost"

#~ msgid "Floating Point Value"
#~ msgstr "Vrijednost sa tekućim zarezom"

#~ msgid "Connection to %1 has been lost."
#~ msgstr "Konekcija na %1 je izgubljena."

#~ msgid "Global Style Settings"
#~ msgstr "Postavke globalnog stila"

#~ msgid "Display Style"
#~ msgstr "Stil pokazivača"

#~ msgid "First foreground color:"
#~ msgstr "Prva boja teksta:"

#~ msgid "Second foreground color:"
#~ msgstr "Druga boja teksta:"

#~ msgid "Sensor Colors"
#~ msgstr "Boja senzora"

#~ msgid "Change Color..."
#~ msgstr "Izmjeni boju..."

#~ msgid "Color %1"
#~ msgstr "Boja %1"

#~ msgid "Connection to %1 refused"
#~ msgstr "%1 odbija konekciju"

#~ msgid "Host %1 not found"
#~ msgstr "Računar %1 nije pronađen"

#~ msgid "Timeout at host %1"
#~ msgstr "Greška u čitanju sa računara %1"

#~ msgid "Network failure host %1"
#~ msgstr "Mrežna greška računar %1"

#~ msgid "Timer Settings"
#~ msgstr "Postavke timera"

#~ msgid "Use update interval of worksheet"
#~ msgstr "Koristi interval osvježavanja radnog lista"

#~ msgid "All displays of the sheet are updated at the rate specified here."
#~ msgstr "Svi pokazivači na listu se obnavljaju u navedenom vremenu."

#~ msgid "Connect Host"
#~ msgstr "Spoji računar"

#~ msgid "Host:"
#~ msgstr "Računar:"

#~ msgid "Enter the name of the host you want to connect to."
#~ msgstr "Unesite ime računara na koji se želite spojiti."

#~ msgid "Connection Type"
#~ msgstr "Vrsta konekcije"

#~ msgid "ssh"
#~ msgstr "ssh"

#~ msgid "Select this to use the secure shell to login to the remote host."
#~ msgstr ""
#~ "Izaberite ovu opciju ako želite koristiti secure shell za prijavu na "
#~ "udaljeni računar."

#~ msgid "rsh"
#~ msgstr "rsh"

#~ msgid "Select this to use the remote shell to login to the remote host."
#~ msgstr ""
#~ "Izaberite ovu opciju ako želite koristiti remote shell za prijavu na "
#~ "udaljeni računar."

#~ msgid "Daemon"
#~ msgstr "Daemon"

#~ msgid ""
#~ "Select this if you want to connect to a ksysguard daemon that is running "
#~ "on the machine you want to connect to, and is listening for client "
#~ "requests."
#~ msgstr ""
#~ "Izaberite ovo ako želite da se spojite na ksysguard demon koji je "
#~ "pokrenut na računaru na koji se želite spojiti, i koji sluša za zahtjeve "
#~ "klijenata."

#~ msgid "Custom command"
#~ msgstr "Vlastita naredba"

#~ msgid ""
#~ "Select this to use the command you entered below to start ksysguardd on "
#~ "the remote host."
#~ msgstr ""
#~ "Izaberite ovo da biste koristili naredbu unesenu ispod za pokretanje "
#~ "ksysguardd na udaljenom računaru."

#~ msgid "Port:"
#~ msgstr "Port:"

#~ msgid ""
#~ "Enter the port number on which the ksysguard daemon is listening for "
#~ "connections."
#~ msgstr "Unesite broj porta na kojem ksysguard demon očekuje konekcije."

#~ msgid "e.g.  3112"
#~ msgstr "npr.  3112"

#~ msgid "Command:"
#~ msgstr "Naredba:"

#~ msgid ""
#~ "Enter the command that runs ksysguardd on the host you want to monitor."
#~ msgstr ""
#~ "Unesite naredbu za pokretanje ksysguardd na računaru koji želite pratiti."

#~ msgid "e.g. ssh -l root remote.host.org ksysguardd"
#~ msgstr "npr.. ssh -l root remote.host.org ksysguardd"

#~ msgid ""
#~ "Message from %1:\n"
#~ "%2"
#~ msgstr ""
#~ "Poruka od %1:\n"
#~ "%2"

#~ msgid "Sensor Browser"
#~ msgstr "Preglednik senzora"

#~ msgid "Sensor Type"
#~ msgstr "Vrsta senzora"

#~ msgid "Drag sensors to empty cells of a worksheet or the panel applet."
#~ msgstr "Dovucite senzore u prazna polja radnog lista ili appleta na panelu."

#~ msgid ""
#~ "The sensor browser lists the connected hosts and the sensors that they "
#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
#~ "panel applet. A display will appear that visualizes the values provided "
#~ "by the sensor. Some sensor displays can display values of multiple "
#~ "sensors. Simply drag other sensors on to the display to add more sensors."
#~ msgstr ""
#~ "Pretraživač senzora daje listu računara na koje ste konektovani i senzora "
#~ "koje oni pružaju. Kliknite i odvucite senzore u za to predviđene oblasti "
#~ "radnog lista ili appleta na panelu. Tada će se pojaviti pokazivač koji "
#~ "prikazuje vrijednosti očitane sa senzora. Neki pokazivači mogu pokazivati "
#~ "vrijednosti više senzora, jednostavno povucite druge senzore na prikaz i "
#~ "oni će biti dodani istom."

#~ msgid "Drag sensors to empty fields in a worksheet."
#~ msgstr "Povucite senzore na prazna polja na radnom listu."

#~ msgid "Worksheet Properties"
#~ msgstr "Postavke radnog lista"

#~ msgid "Rows:"
#~ msgstr "Redovi:"

#~ msgid "Columns:"
#~ msgstr "Kolone:"

#~ msgid "Enter the number of rows the sheet should have."
#~ msgstr "Unesite broj redova lista."

#~ msgid "Enter the number of columns the sheet should have."
#~ msgstr "Unesite broj kolona lista."

#~ msgid "Enter the title of the worksheet here."
#~ msgstr "Ovdje unosite naslov lista."

#~ msgid "TDE system guard"
#~ msgstr "TDE system guard"

#~ msgid "TDE System Guard"
#~ msgstr "TDE System Guard"

#~ msgid "88888 Processes"
#~ msgstr "88888 Procesa"

#~ msgid "Memory: 88888888888 kB used, 88888888888 kB free"
#~ msgstr "Memorija: 88888888888 kB zauzeto, 88888888888 kB slobodno"

#~ msgid "Swap: 888888888 kB used, 888888888 kB free"
#~ msgstr "Swap: 888888888 kB zauzeto, 888888888 kB slobodno"

#~ msgid "&New Worksheet..."
#~ msgstr "&Novi radni list..."

#~ msgid "Import Worksheet..."
#~ msgstr "Uvezi radni list..."

#~ msgid "&Import Recent Worksheet"
#~ msgstr "&Uvezi skorašnje listove"

#~ msgid "&Remove Worksheet"
#~ msgstr "&Ukloni radni list"

#~ msgid "&Export Worksheet..."
#~ msgstr "&Izvezi radni list..."

#~ msgid "C&onnect Host..."
#~ msgstr "&Spoji računar..."

#~ msgid "D&isconnect Host"
#~ msgstr "O&dspoji računar"

#~ msgid "&Worksheet Properties"
#~ msgstr "&Postavke radnog lista"

#~ msgid "Load Standard Sheets"
#~ msgstr "Učitaj standardne listove"

#~ msgid "Configure &Style..."
#~ msgstr "Podešavanje &stila..."

#~ msgid "Do you really want to restore the default worksheets?"
#~ msgstr "Zaista želite vratiti podrazumjevane radne listove?"

#~ msgid "Reset All Worksheets"
#~ msgstr "Resetuj sve radne listove"

#~ msgid "Reset"
#~ msgstr "Poništi"

#~ msgid "Process Table"
#~ msgstr "Tabela procesa"

#~ msgid ""
#~ "_n: 1 Process\n"
#~ "%n Processes"
#~ msgstr ""
#~ "%b proces\n"
#~ "%n procesa\n"
#~ "%n procesa"

#~ msgid "Memory: %1 %2 used, %3 %4 free"
#~ msgstr "Memorija: %1 %2 zauzeto, %3 %4 slobodno"

#~ msgid "No swap space available"
#~ msgstr "Nema slobodnog swap prostora"

#~ msgid "Swap: %1 %2 used, %3 %4 free"
#~ msgstr "Swap: %1 %2 zauzeto, %3 %4 slobodno"

#~ msgid "Show only process list of local host"
#~ msgstr "Prikaži samo procese na lokalnom računaru"

#~ msgid "Optional worksheet files to load"
#~ msgstr "Ostale datoteke s radnim listovima za učitavanje"

#~ msgid "(c) 1996-2002 The KSysGuard Developers"
#~ msgstr "(c) 1996-2002 KSysGuard programeri"

#~ msgid ""
#~ "Solaris Support\n"
#~ "Parts derived (by permission) from the sunos5\n"
#~ "module of William LeFebvre's \"top\" utility."
#~ msgstr ""
#~ "Solaris podrška\n"
#~ "Dijelovi izvedeni (uz dozvolu) iz sunos5\n"
#~ "modula \"top\" alata čiji je autor William LeFebvre."

#~ msgid ""
#~ "This is your work space. It holds your worksheets. You need to create a "
#~ "new worksheet (Menu File->New) before you can drag sensors here."
#~ msgstr ""
#~ "Ovo je vaš radni prostor. On sadrži vaše radne listove. Možete napraviti "
#~ "novi radni list (u meniju Datoteka -> Novi) prije nego što ovdje dovučete "
#~ "senzore."

#~ msgid "Sheet %1"
#~ msgstr "List %1"

#~ msgid ""
#~ "The worksheet '%1' contains unsaved data.\n"
#~ "Do you want to save the worksheet?"
#~ msgstr ""
#~ "List '%1' sadrži podatke koji nisu snimljeni.\n"
#~ "Da li želite snimiti list?"

#~ msgid "*.sgrd|Sensor Files"
#~ msgstr "*.sgrd|Senzor datoteke"

#~ msgid "Select Worksheet to Load"
#~ msgstr "Odaberite radni list za učitavanje"

#~ msgid "You do not have a worksheet that could be saved."
#~ msgstr "Ne postoji niti jedan radni list koji možete snimiti."

#~ msgid "Save Current Worksheet As"
#~ msgstr "Snimi sadašnji radni list kao"

#~ msgid "There are no worksheets that could be deleted."
#~ msgstr "Ne postoji niti jedan radni list koji možete obrisati."

#~ msgid "Cannot find file ProcessTable.sgrd."
#~ msgstr "Ne mogu pronaći datoteku ProcessTable.sgrd."

#~ msgid "#"
#~ msgstr "#"