# Translation of kdvi to Croatian
# Copyright (C) Croatian team
# Translators: Igor Jagec <igorm5@yahoo.com>,Ljubomir Božić <ljubo108@vip.hr>,Robert Pezer <rpezer@phy.hr>,Sasa Poznanovic <sasa.poznanovic@vuka.hr>,Zoran Jankovic <zoran.jankovic@inet.hr>,
msgid ""
msgstr ""
"Project-Id-Version: kdvi 0\n"
"POT-Creation-Date: 2020-05-11 04:04+0200\n"
"PO-Revision-Date: 2004-04-20 13:24+CEST\n"
"Last-Translator: auto\n"
"Language-Team: Croatian <lokalizacija@linux.hr>\n"
"Language: hr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 :  n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;;\n"
"X-Generator: TransDict server\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr ""
"Igor Jagec, Ljubomir Božić, Robert Pezer, Sasa Poznanovic, Zoran Jankovic"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "lokalizacija@linux.hr"

#: TeXFontDefinition.cpp:108
msgid "Cannot find font %1, file %2."
msgstr ""

#: TeXFontDefinition.cpp:124
#, fuzzy, c-format
msgid "Checksum mismatch for font file %1"
msgstr "Neusaglašenost kontrolne sume za pismo datoteka %1"

#: TeXFontDefinition.cpp:133
#, fuzzy
msgid "TeX virtual"
msgstr "TeX virtualno"

#: TeXFontDefinition.cpp:142
#, fuzzy
msgid "TeX Font Metric"
msgstr "TeX-ova metrika pisama"

#: TeXFontDefinition.cpp:167
#, fuzzy
msgid "FreeType"
msgstr "FreeType"

#: TeXFontDefinition.cpp:172
#, c-format
msgid "Cannot recognize format for font file %1"
msgstr "Ne mogu prepoznati oblik pismovne datoteke %1"

#: TeXFont_PFB.cpp:44
#, fuzzy
msgid ""
"The font file %1 could be opened and read, but its font format is "
"unsupported."
msgstr ""
"Pismo datoteka %1 može da se otvori i pročita, ali njegov format nije "
"podržan."

#: TeXFont_PFB.cpp:50
#, fuzzy
msgid "The font file %1 is broken, or it could not be opened or read."
msgstr ""
"Pismo datoteka %1 je ili pokvaren, ili ne može da se otvorili ili pročita."

#: TeXFont_PFB.cpp:171
#, fuzzy, c-format
msgid ""
"FreeType reported an error when setting the character size for font file %1."
msgstr ""
"FreeType je prijavio grešku prilikom postavljanja veličine znakova za pismo "
"datoteka %1."

#: TeXFont_PFB.cpp:187
msgid "FreeType is unable to load glyph #%1 from font file %2."
msgstr "FreeType ne može da učita glif #%1 iz pismo datotekaa %2."

#: TeXFont_PFB.cpp:199
msgid "FreeType is unable to render glyph #%1 from font file %2."
msgstr "FreeType ne može da renderuje glif #%1 iz pismo datotekaa %2."

#: TeXFont_PFB.cpp:212
#, fuzzy
msgid "Glyph #%1 is empty."
msgstr "Glif #%1 je prazan."

#: TeXFont_PFB.cpp:213
msgid "Glyph #%1 from font file %2 is empty."
msgstr "Glif #%1 iz pismo datotekaa %2 je prazan."

#: TeXFont_PFB.cpp:282
msgid "FreeType is unable to load metric for glyph #%1 from font file %2."
msgstr "FreeType ne može da učita metriku za glif #%1 iz pismo datotekaa %2."

#: TeXFont_PK.cpp:94
#, fuzzy, c-format
msgid "Cannot open font file %1."
msgstr "Ne mogu otvoriti pismo datoteka %1."

#: TeXFont_PK.cpp:139
#, fuzzy
msgid "TexFont_PK::operator[]: Character %1 not defined in font %2"
msgstr "TexPismo_PK::operator[]: Znak %1 nije definiran u pismou %2"

#: TeXFont_PK.cpp:457
msgid "Unexpected %1 in PK file %2"
msgstr "Neočekivani %1 u PK datoteci %2"

#: TeXFont_PK.cpp:524
msgid "The character %1 is too large in file %2"
msgstr "Znak %1 prevelik je u datoteci %2"

#: TeXFont_PK.cpp:629 TeXFont_PK.cpp:715
msgid "Wrong number of bits stored:  char. %1, font %2"
msgstr "Krivi broj bitova je pohranjen: znak %1, pismo %2"

#: TeXFont_PK.cpp:631 TeXFont_PK.cpp:717
msgid "Bad pk file (%1), too many bits"
msgstr "Loša PK datoteka (%1), previše bitova"

#: TeXFont_PK.cpp:748
msgid "Font has non-square aspect ratio "
msgstr "Pismo ima nekvadratne proporcije"

#: dviFile.cpp:112
msgid "The DVI file does not start with the preamble."
msgstr "DVI datoteka ne započinje sa zaglavljem."

#: dviFile.cpp:117
msgid ""
"The DVI file contains the wrong version of DVI output for this program. "
"Hint: If you use the typesetting system Omega, you have to use a special "
"program, such as oxdvi."
msgstr ""
"DVI datoteka sadrži krivu inačicu DVI izlaza za ovaj program. NApomena: ako "
"koristite Omega sustav, morate koristiti specijalni program, kao što je "
"oxdvi."

#: dviFile.cpp:155
msgid ""
"The DVI file is badly corrupted. KDVI was not able to find the postamble."
msgstr "DVI datoteka je teško oštećena. KDVI ne može pronaći završetak."

#: dviFile.cpp:170
msgid "The postamble does not begin with the POST command."
msgstr "Završetak datoteke ne počinje sa POST naredbom."

#: dviFile.cpp:225
msgid "The postamble contained a command other than FNTDEF."
msgstr "ZAvršetak datoteke sadrži komandu različitu od FNTDEF."

#: dviFile.cpp:259
msgid "The page %1 does not start with the BOP command."
msgstr "Stranica %1 ne počinje s BOP naredbom."

#: dviFile.cpp:294
msgid "Not enough memory to load the DVI-file."
msgstr "Nema dovoljno memorije za učitavanje DVI datoteke."

#: dviFile.cpp:300
msgid "Could not load the DVI-file."
msgstr "Ne mogu učitati DVI datoteku."

#: dviRenderer.cpp:210
msgid ""
"<qt><strong>File corruption!</strong> KDVI had trouble interpreting your DVI "
"file. Most likely this means that the DVI file is broken.</qt>"
msgstr ""

#: dviRenderer.cpp:212 dviRenderer.cpp:483
#, fuzzy
msgid "DVI File Error"
msgstr "Greška u DVI datoteku"

#: dviRenderer.cpp:262
msgid "KDVI: Information"
msgstr "KDVI: Informacije"

#: dviRenderer.cpp:277
msgid ""
"<qt>This DVI file contains source file information. You may click into the "
"text with the middle mouse button, and an editor will open the TeX-source "
"file immediately.</qt>"
msgstr ""
"<qt>Ova DVI datoteka sadrži podatke o izvornoj datoteci. Možete kliknuti na "
"tekst sa srednjom tipkom miša i uređivač će otvoriti TeX izvornu datoteku.</"
"qt>"

#: dviRenderer.cpp:286
msgid "Explain in more detail..."
msgstr "Detaljnije objašnjenje..."

#: dviRenderer.cpp:315
#, fuzzy
msgid "Embedding PostScript Files"
msgstr "Ugrađujem PostScript datotekaove"

#: dviRenderer.cpp:345
#, fuzzy
msgid "Not all PostScript files could be embedded into your document."
msgstr "Neki PostScript datoteke nisu mogli da se ugrade u vaš dokument."

#: dviRenderer.cpp:348
msgid ""
"All external PostScript files were embedded into your document. You will "
"probably want to save the DVI file now."
msgstr ""
"Sve vanjske PostScript datoteke su uspješno ugrađene u vaš dokument. Sada "
"ćete vjerojatno željeti spremiti DVI datoteku."

#: dviRenderer.cpp:439
#, fuzzy
msgid ""
"<qt><strong>File error.</strong> The specified file '%1' does not exist. "
"KDVI already tried to add the ending '.dvi'.</qt>"
msgstr ""
"<qt><strong>Datotečna pogreška!</strong> Datoteka %1 ne postoji. KDVI je već "
"pokušao dodati nastaval '.dvi'</qt>"

#: dviRenderer.cpp:441
#, fuzzy
msgid "File Error!"
msgstr "Greška u datoteku!"

#: dviRenderer.cpp:452
msgid ""
"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type "
"<strong>%2</strong>. KDVI can only load DVI (.dvi) files.</qt>"
msgstr ""
"<qt>Ne mogu otvoriti datoteku <nobr><strong>%1</strong></nobr> tipa <strong>"
"%2</strong>. KDVI može učitati samo DVI (.dvi) datoteke.</qt>"

#: dviRenderer.cpp:463 dviRenderer.cpp:481
msgid ""
"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most "
"likely this means that the DVI file is broken.</qt>"
msgstr ""
"<qt>Pokvarena datoteka! KDVI ima problema s interpretiranjem vaše DVI "
"datoteke. Najvjerojatnije je DVI datoetka pokvarena.</qt>"

#: dviRenderer.cpp:640
msgid ""
"<qt>You have asked KDVI to locate the place in the DVI file which "
"corresponds to line %1 in the TeX-file <strong>%2</strong>. It seems, "
"however, that the DVI file does not contain the necessary source file "
"information. We refer to the manual of KDVI for a detailed explanation on "
"how to include this information. Press the F1 key to open the manual.</qt>"
msgstr ""
"<qt>Pokušali ste pronaći mjesto u DVI datoeci koje odgovara liniji %1 u TeX "
"datoteci <strong>%2</strong>. Izgleda da DVI datoteka ne sadrži nužne "
"podatke o  izvornoj datoteci. Predlažemo da pogledate u KDVI priručnik za "
"detaljnije upute o uključivanju ovakoih podataka. Pritisnite F1 kako bi "
"otvorili priručnik.</qt>"

#: dviRenderer.cpp:645 dviRenderer.cpp:685
#, fuzzy
msgid "Could Not Find Reference"
msgstr "Nisam mogao da pronađem referencu"

#: dviRenderer.cpp:683
msgid ""
"<qt>KDVI was not able to locate the place in the DVI file which corresponds "
"to line %1 in the TeX-file <strong>%2</strong>.</qt>"
msgstr ""
"<qt>KDVI ne može pronaći mjesto u DVI datoteci koje bi odgovaralo liniji %1 "
"u TeX datoteci <strong>%2</strong>.</qt>"

#: dviRenderer.cpp:737
msgid ""
"The DVI-file refers to the TeX-file <strong>%1</strong> which could not be "
"found."
msgstr ""
"DVI datoteka odnosi se na TeX datoteku <strong>%1</strong>, koju ne mogu "
"pronaći."

#: dviRenderer.cpp:740
#, fuzzy
msgid "Could Not Find File"
msgstr "Nisam mogao da pronađem datoteka"

#: dviRenderer.cpp:747
#, fuzzy
msgid ""
"You have not yet specified an editor for inverse search. Please choose your "
"favorite editor in the <strong>DVI options dialog</strong> which you will "
"find in the <strong>Settings</strong>-menu."
msgstr ""
"Još uvijek niste odredili uređivač za inverznu pretragu. Odaberite vaš "
"omiljeni uređivač u <strong>dijalogu DVI-jevih opcija</strong> koji ćete "
"naći u izborniku <strong>Podešavanja</strong>."

#: dviRenderer.cpp:752
msgid "Need to Specify Editor"
msgstr "Morate odrediti uređivač"

#: dviRenderer.cpp:753
msgid "Use TDE's Editor Kate for Now"
msgstr "Za sada koristi TDE-ov Kate uređivač"

#: dviRenderer.cpp:785
msgid ""
"<qt>The external program<br><br><tt><strong>%1</strong></tt><br/><br/>which "
"was used to call the editor for inverse search, reported an error. You might "
"wish to look at the <strong>document info dialog</strong> which you will "
"find in the File-Menu for a precise error report. The manual for KDVI "
"contains a detailed explanation how to set up your editor for use with KDVI, "
"and a list of common problems.</qt>"
msgstr ""

#: dviRenderer.cpp:791
msgid "Starting the editor..."
msgstr "Pokrećem uređivač..."

#: dviRenderer_draw.cpp:270
#, fuzzy
msgid "The DVI code set a character of an unknown font."
msgstr "DVI izvorni kod koristi znak iz nepoznatog pismoa"

#: dviRenderer_draw.cpp:295 dviRenderer_prescan.cpp:636
msgid "The DVI code referred to font #%1, which was not previously defined."
msgstr "DVI kod se odnosi na pismo #%1, koje nije prethodno definirano."

#: dviRenderer_draw.cpp:380
msgid "The stack was not empty when the EOP command was encountered."
msgstr "Slog nije bio prazan kad je izdana EOP naredba."

#: dviRenderer_draw.cpp:392
msgid "The stack was empty when a POP command was encountered."
msgstr "Slog je bio prazan prilikom izdavanja POP naredbe."

#: dviRenderer_draw.cpp:516 dviRenderer_draw.cpp:525
msgid "The DVI code referred to a font which was not previously defined."
msgstr "DVI kod se odnosi na pismo koje nije prethodno definirano."

#: dviRenderer_draw.cpp:565
msgid "An illegal command was encountered."
msgstr "Pogrešna naredba."

#: dviRenderer_draw.cpp:570
msgid "The unknown op-code %1 was encountered."
msgstr "Nepoznat op-kod %1."

#: dviRenderer_export.cpp:84
#, fuzzy
msgid ""
"KDVI could not locate the program 'dvipdfm' on your computer. That program "
"is essential for the export function to work. You can, however, convert the "
"DVI-file to PDF using the print function of KDVI, but that will often "
"produce documents which print ok, but are of inferior quality if viewed in "
"the Acrobat Reader. It may be wise to upgrade to a more recent version of "
"your TeX distribution which includes the 'dvipdfm' program.\n"
"Hint to the perplexed system administrator: KDVI uses the shell's PATH "
"variable when looking for programs."
msgstr ""
"KDVI nije uspio da locira program „dvipdfm“ na vašem računalou. Ovaj program "
"je potreban za izvoženje DVI formata u PDF format. Ipak, možete izvršiti "
"koninačicu u PDF format koristeći KDVI-ovu funkciju za ispis, ali u većini "
"slučajeva ova funkcija će napraviti dokumente koji su dobrog kvaliteta za "
"ispis, ali lošeg kvaliteta za čitanje programom Acrobat Reader. Bilo bi "
"dobro da nabavite noviju inačicu vaše distribucije TeX-a, koja sadrži "
"program „dvipdfm“.\n"
"Savjet za administratore sustava: KDVI koristi promjenjivu školjke PATH kada "
"traži programe."

#: dviRenderer_export.cpp:99
#, fuzzy
msgid "*.pdf|Portable Document Format (*.pdf)"
msgstr ".pdf|Prenosivi format dokumenata (*.pdf)"

#: dviRenderer_export.cpp:99 dviRenderer_export.cpp:198
msgid "Export File As"
msgstr "Izvezi datoteku kao "

#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164
#, fuzzy
msgid ""
"The file %1\n"
"exists. Do you want to overwrite that file?"
msgstr ""
"Datoteka %1\n"
"već postoji. Želite li da ga prebrišete?"

#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165
#, fuzzy
msgid "Overwrite File"
msgstr "Prebriši datoteka"

#: dviRenderer_export.cpp:105 kdvi_multipage.cpp:165
#, fuzzy
msgid "Overwrite"
msgstr "Prebriši datoteka"

#: dviRenderer_export.cpp:112
msgid "Using dvipdfm to export the file to PDF"
msgstr "Korištenje dvipdfm za izvoz datoteke u PDF"

#: dviRenderer_export.cpp:114
msgid ""
"KDVI is currently using the external program 'dvipdfm' to convert your DVI-"
"file to PDF. Sometimes that can take a while because dvipdfm needs to "
"generate its own bitmap fonts Please be patient."
msgstr ""

#: dviRenderer_export.cpp:118
msgid "Waiting for dvipdfm to finish..."
msgstr "Čekam da dvipdfm završi..."

#: dviRenderer_export.cpp:119
msgid "dvipdfm progress dialog"
msgstr ""

#: dviRenderer_export.cpp:121 dviRenderer_export.cpp:224
msgid "Please be patient"
msgstr "Molim za strpljenje"

#: dviRenderer_export.cpp:137
msgid ""
"<qt>The external program 'dvipdf', which was used to export the file, "
"reported an error. You might wish to look at the <strong>document info "
"dialog</strong> which you will find in the File-Menu for a precise error "
"report.</qt>"
msgstr ""
"<qt>Vanjski program 'dvipdf', korišten za izvoz datoteke, javio je pogrešku. "
"Možete pogledati u <strong>Podatke o dokumentu</strong> koje će te pronaći u "
"meniju Datoteka za točniji opis greške.</qt>"

#: dviRenderer_export.cpp:140
msgid "Export: %1 to PDF"
msgstr "Eksportiraj: %1 u PDF"

#: dviRenderer_export.cpp:181
msgid ""
"<qt><P>This DVI file refers to external graphic files which are not in "
"PostScript format, and cannot be handled by the <strong>dvips</strong> "
"program that KDVI uses interally to print or to export to PostScript. The "
"functionality that you require is therefore unavailable in this version of "
"KDVI.</p><p>As a workaround, you can use the <strong>File/Export As</strong>-"
"Menu to save this file in PDF format, and then use a PDF viewer.</p><p>The "
"author of KDVI apologizes for the inconvenience. If enough users complain, "
"the missing functionality might later be added.</p></qt>"
msgstr ""

#: dviRenderer_export.cpp:188
msgid "Functionality Unavailable"
msgstr ""

#: dviRenderer_export.cpp:198
#, fuzzy
msgid "*.ps|PostScript (*.ps)"
msgstr "*.ps|PostScript (*.ps)"

#: dviRenderer_export.cpp:215
msgid "Using dvips to export the file to PostScript"
msgstr "Korištenje dvips za izvoz datoteke u PostScript"

#: dviRenderer_export.cpp:217
msgid ""
"KDVI is currently using the external program 'dvips' to convert your DVI-"
"file to PostScript. Sometimes that can take a while because dvips needs to "
"generate its own bitmap fonts Please be patient."
msgstr ""

#: dviRenderer_export.cpp:221
msgid "Waiting for dvips to finish..."
msgstr "Čekam da dvips završi..."

#: dviRenderer_export.cpp:222
msgid "dvips progress dialog"
msgstr ""

#: dviRenderer_export.cpp:300
msgid ""
"<qt>The external program 'dvips', which was used to export the file, "
"reported an error. You might wish to look at the <strong>document info "
"dialog</strong> which you will find in the File-Menu for a precise error "
"report.</qt>"
msgstr ""
"<qt>Vanjski program 'dvips', korišten za izvoz datoteke, prijavio je grešku. "
"Detaljniji opis greške možete pogledati u <strong>Podaci o dokumentu</"
"strong>, pod menijem Datoteka."

#: dviRenderer_export.cpp:303
#, fuzzy
msgid "Export: %1 to PostScript"
msgstr "Izvoz: %1 u PostScript"

#: dviRenderer_prescan.cpp:87
#, fuzzy, c-format
msgid "Embedding %1"
msgstr "Ugrađujem %1"

#: dviRenderer_prescan.cpp:105
msgid ""
"Page %1: The PostScript file <strong>%2</strong> could not be found.<br>"
msgstr "Strana %1: PostScript datoteka <strong>%2</strong> nije pronađen.<br>"

#: dviRenderer_prescan.cpp:255
#, fuzzy
msgid "The papersize data '%1' could not be parsed."
msgstr "Podaci o veličini papira „%1“ nisu mogli da se raščlane."

#: dviWidget.cpp:115
#, fuzzy
msgid "line %1 of %2"
msgstr "linija %1 od %2"

#: fontpool.cpp:46
msgid "KDVI is currently generating bitmap fonts..."
msgstr "KDVI trenutačno stvara bitmap pisma..."

#: fontpool.cpp:47
msgid "Aborts the font generation. Don't do this."
msgstr "Prekida stvaranje pisma. Nemojte to raditi."

#: fontpool.cpp:48
msgid ""
"KDVI is currently generating bitmap fonts which are needed to display your "
"document. For this, KDVI uses a number of external programs, such as "
"MetaFont. You can find the output of these programs later in the document "
"info dialog."
msgstr ""
"KDVI trenutačno stvara bitmap pisma potrebna za prikazivanje vašeg "
"dokumenta. KDVI za to koristi niz vanjskih programa, kao što je MetaFont. "
"Izlazne podatke ovih programa možete pronaći kasnije u dijalogu o podacima o "
"dokumentu."

#: fontpool.cpp:51
msgid "KDVI is generating fonts. Please wait."
msgstr "KDVI stvara pisma. MOlim pričekajte."

#: fontpool.cpp:161
msgid "Could not allocate memory for a font structure!"
msgstr "Ne mogu alocirati memoriju za pismovnu strukturu!"

#: fontpool.cpp:186
msgid "The fontlist is currently empty."
msgstr "Lista pisama tenutačno je prazna."

#: fontpool.cpp:190
#, fuzzy
msgid "TeX Name"
msgstr "TeX ime"

#: fontpool.cpp:191
msgid "Family"
msgstr "Obitelj"

#: fontpool.cpp:193
msgid "Type"
msgstr "Tip"

#: fontpool.cpp:194
msgid "Encoding"
msgstr "Kodiranje"

#: fontpool.cpp:195
msgid "Comment"
msgstr "Komentar"

#: fontpool.cpp:208
#, fuzzy
msgid "Font file not found"
msgstr "Datoteka nije pronađen"

#: fontpool.cpp:284
#, fuzzy
msgid ""
"<qt><p>KDVI was not able to locate all the font files which are necessary to "
"display the current DVI file. Your document might be unreadable.</p></qt>"
msgstr ""
"KDVI nije mogao da pronađe sve pisma koji su potrebni za prikazivanje "
"trenutneg DVI datotekaa. Vaš dokument može biti nečitljiv."

#: fontpool.cpp:288
#, fuzzy
msgid "Not All Font Files Found"
msgstr "Pismo nije pronađeno - KDVI"

#: fontpool.cpp:299
msgid "Locating fonts..."
msgstr "Tražim pisma..."

#: fontpool.cpp:358
msgid ""
"<p>KDVI relies on the <b>kpsewhich</b> program to locate font files on your "
"hard disc and to generate PK fonts, if necessary.</p>"
msgstr ""

#: fontpool.cpp:361
msgid ""
"<p>The shell process for the kpsewhich program could not be started. "
"Consequently, some font files could not be found, and your document might by "
"unreadable. If this error is reproducable please report the issue to the "
"KDVI developers using the 'Help' menu.<p>"
msgstr ""

#: fontpool.cpp:367 fontpool.cpp:405
#, fuzzy
msgid "Problem locating fonts - KDVI"
msgstr "Pismo nije pronađeno - KDVI"

#: fontpool.cpp:384
#, fuzzy
msgid "Font generation aborted - KDVI"
msgstr "Pismo nije pronađeno - KDVI"

#: fontpool.cpp:394
msgid ""
"<p>There were problems running kpsewhich. As a result, some font files could "
"not be located, and your document might be unreadable.</p><p><b>Possible "
"reason:</b> The kpsewhich program is perhaps not installed on your system, "
"or it cannot be found in the current search path.</p><p><b>What you can do:</"
"b> The kpsewhich program is normally contained in distributions of the TeX "
"typesetting system. If TeX is not installed on your system, you could "
"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is "
"installed, please try to use the kpsewhich program from the command line to "
"check if it really works.</p>"
msgstr ""

#: fontpool.cpp:590
msgid "Currently generating %1 at %2 dpi"
msgstr "Trenutno stvaram %1 na %2 dpi"

#: fontprogress.cpp:33
msgid "Abort"
msgstr "Odustani"

#: fontprogress.cpp:37
msgid "What's going on here?"
msgstr "Što se događa?"

#: fontprogress.cpp:51
msgid "%v of %m"
msgstr "%v od %m"

#: infodialog.cpp:25
#, fuzzy
msgid "Document Info"
msgstr "Podaci o &dokumentu"

#: infodialog.cpp:27
#, fuzzy
msgid "DVI File"
msgstr "DVI datoteka"

#: infodialog.cpp:30
msgid "Information on the currently loaded DVI-file."
msgstr "Podaci o učitanoj DVI datoteci."

#: infodialog.cpp:38
msgid "Information on currently loaded fonts."
msgstr "Podaci o učitanim pismima."

#: infodialog.cpp:39
msgid ""
"This text field shows detailed information about the currently loaded fonts. "
"This is useful for experts who want to locate problems in the setup of TeX "
"or KDVI."
msgstr ""
"Ovo tekstualno polje prikazuje detaljne informacije o učitanim pismima. To "
"je korisno ekspertima za pronalaženje problem pri namještanju TeX-a ili KDVI-"
"a."

#: infodialog.cpp:43
msgid "External Programs"
msgstr "Vanjski programi"

#: infodialog.cpp:46
msgid "No output from any external program received."
msgstr "Izlazni podaci bilo kojeg vanjskog programa nisu primljeni."

#: infodialog.cpp:47
msgid "Output of external programs."
msgstr "Izlazni podaci vanskih programa."

#: infodialog.cpp:48
msgid ""
"KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text "
"field shows the output of these programs. That is useful for experts who "
"want to find problems in the setup of TeX or KDVI."
msgstr ""
"KDVI koristi vanjske programe, kao što je MetaFont, dvipdfm ili dvips. Ovo "
"tekstualno polje prikazuje izlazne podatke tih programa. To je korisno "
"ekspertima koji žele pronaći probleme pri namještanju TeX-a ili KDVI-a."

#: infodialog.cpp:64
msgid "There is no DVI file loaded at the moment."
msgstr "Nijedna DVI datoteka trenutno nije učitana."

#: infodialog.cpp:67
#, fuzzy
msgid "Filename"
msgstr "Ime datoteke"

#: infodialog.cpp:71
msgid "File Size"
msgstr "&Ime datoteke:"

#: infodialog.cpp:73
msgid "The file does no longer exist."
msgstr "Datoteka više ne postoji."

#: infodialog.cpp:76
msgid "#Pages"
msgstr "#Stranice"

#: infodialog.cpp:77
msgid "Generator/Date"
msgstr "Generator/datum"

#: kdvi_multipage.cpp:70
msgid "Document &Info"
msgstr "Podaci o &dokumentu"

#: kdvi_multipage.cpp:71
#, fuzzy
msgid "Embed External PostScript Files..."
msgstr "Ugradi vanjske PostScript datotekaove..."

#: kdvi_multipage.cpp:72
msgid "Enable All Warnings && Messages"
msgstr "Omogući sva Upozorenja && Poruke"

#: kdvi_multipage.cpp:73
msgid "PostScript..."
msgstr "PostScript..."

#: kdvi_multipage.cpp:74
msgid "PDF..."
msgstr "PDF..."

#: kdvi_multipage.cpp:101 main.cpp:34
msgid "KDVI"
msgstr "KDVI"

#: kdvi_multipage.cpp:102 main.cpp:29
msgid ""
"A previewer for Device Independent files (DVI files) produced by the TeX "
"typesetting system."
msgstr ""

#: kdvi_multipage.cpp:105
msgid ""
"This program displays Device Independent (DVI) files which are produced by "
"the TeX typesetting system.\n"
"KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik."
msgstr ""

#: kdvi_multipage.cpp:109 main.cpp:41
msgid "Current Maintainer."
msgstr ""

#: kdvi_multipage.cpp:113 main.cpp:45
msgid "Author of kdvi 0.4.3"
msgstr ""

#: kdvi_multipage.cpp:114 main.cpp:46
msgid "Maintainer of xdvik"
msgstr ""

#: kdvi_multipage.cpp:115 main.cpp:47
msgid "Author of xdvi"
msgstr ""

#: kdvi_multipage.cpp:116 main.cpp:48
msgid "Testing and bug reporting."
msgstr ""

#: kdvi_multipage.cpp:117 main.cpp:49
msgid "Re-organisation of source code."
msgstr ""

#: kdvi_multipage.cpp:153
msgid "Save File As"
msgstr "Spremi datoteku kao"

#: kdvi_multipage.cpp:196
#, fuzzy
msgid "*.dvi *.DVI|TeX Device Independent Files (*.dvi)"
msgstr ""
"*.dvi *.DVI|TeX uređajno nezavisne datoteke (Device Independent Files - *."
"dvi)"

#: kdvi_multipage.cpp:208
#, fuzzy
msgid "TeX Fonts"
msgstr "TeX pismoovi"

#: kdvi_multipage.cpp:209
#, fuzzy
msgid "DVI Specials"
msgstr "DVI specijalnosti"

#: kdvi_multipage.cpp:242
#, c-format
msgid "Print %1"
msgstr "Ispiši %1"

#: kdvi_multipage.cpp:251
msgid ""
"The list of pages you selected was empty.\n"
"Maybe you made an error in selecting the pages, e.g. by giving an invalid "
"range like '7-2'."
msgstr ""
"Popis odabranih stranica bio je prazan.\n"
"Možda ste učinili pogrešku u odabiru stranica, npr. davanjem pogrešnog "
"opsega kao '7-2'."

#: kdvi_multipage.cpp:414
msgid "All messages and warnings will now be shown."
msgstr "Sve poruke i pogreške bit će prikazani."

#: kdvi_multipage.cpp:465
#, fuzzy
msgid ""
"<qt>This function searches the DVI file for plain text. Unfortunately, this "
"version of KDVI treats only plain ASCII characters properly. Symbols, "
"ligatures, mathematical formulae, accented characters, and non-English text, "
"such as Russian or Korean, will most likely be messed up completely. "
"Continue anyway?</qt>"
msgstr ""
"<qt>Ova funkcija pretražuje DVI datoteku za običan tekst. Nažalost, ova "
"inačica KDVI-a rukuje pravilno samo s čistim ASCII znakovima. Simboli, veze, "
"matematičke formule, naglasci i neengleski tekst, kao što je ruski ili "
"korejski, mogu biti potpuno nečitki. Nastavi svejedno?</qt>"

#: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64
msgid "Function May Not Work as Expected"
msgstr "Funkcija možda neće raditi prema očekivanjima"

#: kdvi_multipage_texthandling.cpp:60
#, fuzzy
msgid ""
"<qt>This function exports the DVI file to a plain text. Unfortunately, this "
"version of KDVI treats only plain ASCII characters properly. Symbols, "
"ligatures, mathematical formulae, accented characters, and non-English text, "
"such as Russian or Korean, will most likely be messed up completely.</qt>"
msgstr ""
"<qt> Ova funkcija eksportira DVI datoteku u običan tekst. Nažalost ova "
"inačica KDVI-a rukuje pravilno samo s čistim ASCII znakovima. Simboli, veze, "
"matematičke formule, naglasci i neengleski tekst kao što je ruski ili "
"korejski vjerojatno će biti potpuno nečitljivi.</qt>"

#: kdvi_multipage_texthandling.cpp:65
msgid "Continue Anyway"
msgstr "Svejedno nastavi"

#: main.cpp:21
msgid ""
"Check if the file is loaded in another KDVI.\n"
"If it is, bring up the other KDVI. Otherwise, load the file."
msgstr ""

#: main.cpp:23
msgid "Navigate to this page"
msgstr ""

#: main.cpp:24
msgid "Files to load"
msgstr ""

#: main.cpp:37
msgid ""
"This program displays Device Independent (DVI) files which are produced by "
"the TeX typesetting system.\n"
"This KDVI version is based on original code from KDVI version 0.43 and xdvik."
msgstr ""

#: main.cpp:80
msgid "The URL %1 is not well-formed."
msgstr ""

#: main.cpp:86
msgid ""
"The URL %1 does not point to a local file. You can only specify local files "
"if you are using the '--unique' option."
msgstr ""

#: optionDialogFontsWidget.cpp:34
#, fuzzy
msgid "This version of KDVI does not support type 1 fonts."
msgstr "Ova inačica KDVI-ja ne podržava Type 1 pisma."

#: optionDialogFontsWidget.cpp:35
#, fuzzy
msgid ""
"KDVI needs the FreeType library to access type 1 fonts. This library was not "
"present when KDVI was compiled. If you want to use type 1 fonts, you must "
"either install the FreeType library and recompile KDVI yourself, or find a "
"precompiled software package for your operating system."
msgstr ""
"KDVI-ju je potrebna biblioteka FreeType da bi pristupio Type 1 pismoovima. "
"Ova biblioteka nije bila prisutna u trenutku kada je KDVI kompajliran. Ako "
"želite da koristite Type 1 pisma, morate ili da instalirate FreeType i sami "
"ponovo kompajlirate KDVI, ili da nađete prekompajlirani paket za vaš sustav."

#: optionDialogSpecialWidget.cpp:32
#, fuzzy
msgid "User-Defined Editor"
msgstr "Korisnički definirana greška"

#: optionDialogSpecialWidget.cpp:34
msgid "Enter the command line below."
msgstr "Unesite naredbu u liniju ispod."

#: optionDialogSpecialWidget.cpp:38
msgid "Click 'Help' to learn how to set up Emacs."
msgstr "Kliknite na 'Pomoć' da bi naučili kako podesiti Emacs."

#: optionDialogSpecialWidget.cpp:42
#, fuzzy
msgid "Kate perfectly supports inverse search."
msgstr "NEdit savršeno podržava obrnuto pretraživanje."

#: optionDialogSpecialWidget.cpp:46
#, fuzzy
msgid "Kile works very well"
msgstr "Kile radi vrlo dobro"

#: optionDialogSpecialWidget.cpp:50
msgid "NEdit perfectly supports inverse search."
msgstr "NEdit savršeno podržava obrnuto pretraživanje."

#: optionDialogSpecialWidget.cpp:54
msgid "VIM version 6.0 or greater works just fine."
msgstr "VIM inačica 6.0 ili viša radi sasvim zadovoljavajuće."

#: optionDialogSpecialWidget.cpp:58
msgid "Click 'Help' to learn how to set up XEmacs."
msgstr "Kliknite na 'Pomoć' da bi naučili kako podesiti XEmacs."

#: psgs.cpp:152
msgid "Generating PostScript graphics..."
msgstr "Stvaranje PostScript grafike..."

#: psgs.cpp:250
msgid ""
"<qt>The version of Ghostview that is installed on this computer does not "
"contain any of the Ghostview device drivers that are known to KDVI. "
"PostScript support has therefore been turned off in KDVI.</qt>"
msgstr ""

#: psgs.cpp:253
msgid ""
"<qt><p>The Ghostview program, which KDVI uses internally to display the "
"PostScript graphics that is included in this DVI file, is generally able to "
"write its output in a variety of formats. The sub-programs that Ghostview "
"uses for these tasks are called 'device drivers'; there is one device driver "
"for each format that Ghostview is able to write. Different versions of "
"Ghostview often have different sets of device drivers available. It seems "
"that the version of Ghostview that is installed on this computer does not "
"contain <strong>any</strong> of the device drivers that are known to KDVI.</"
"p><p>It seems unlikely that a regular installation of Ghostview would not "
"contain these drivers. This error may therefore point to a serious "
"misconfiguration of the Ghostview installation on your computer.</p><p>If "
"you want to fix the problems with Ghostview, you can use the command "
"<strong>gs --help</strong> to display the list of device drivers contained "
"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' "
"drivers. Note that KDVI needs to be restarted to re-enable PostScript "
"support.</p></qt>"
msgstr ""

#: special.cpp:39
#, fuzzy
msgid "That makes 25 errors. Further error messages will not be printed."
msgstr ""
"Nađeno je 25 grešaka do sada. Dalje poruke o greškama neće biti prikazane."

#: special.cpp:224
#, fuzzy
msgid ""
"Error in DVIfile '%1', page %2. Color pop command issued when the color "
"stack is empty."
msgstr ""
"Greška u DVI datoteku „%1“, na strani %2. Izdata je naredba pop za boju kada "
"je stek za boje prazan."

#: special.cpp:309
#, fuzzy
msgid ""
"Malformed parameter in the epsf special command.\n"
"Expected a float to follow %1 in %2"
msgstr "Krivo oblikovani parametar u epsf posebnoj naredbi."

#: special.cpp:435
#, fuzzy, c-format
msgid ""
"File not found: \n"
" %1"
msgstr ""
"Datoteka nije pronađen:\n"
" %1"

#: special.cpp:702
#, fuzzy
msgid ""
"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation "
"special."
msgstr ""
"Greška u DVI datoteku „%1“, na strani %2. Izdata je naredba pop za boju kada "
"je stek za boje prazan."

#: special.cpp:725
#, fuzzy
msgid "The special command '%1' is not implemented."
msgstr "Specijalna naredba „%1“ nije implementirana."

#: util.cpp:75
msgid "Fatal Error! "
msgstr "Kobna greška!"

#: util.cpp:78
#, fuzzy
msgid ""
"Fatal error.\n"
"\n"
msgstr ""
"Kobna greška!\n"
"\n"

#: util.cpp:80
msgid ""
"\n"
"\n"
"This probably means that either you found a bug in KDVI,\n"
"or that the DVI file, or auxiliary files (such as font files, \n"
"or virtual font files) were really badly broken.\n"
"KDVI will abort after this message. If you believe that you \n"
"found a bug, or that KDVI should behave better in this situation\n"
"please report the problem."
msgstr ""
"\n"
"\n"
"Ovo vjerojatno znači da ste pronašli bug u KDVI-u,\n"
"ili da DVI datoteka, ili su pomoćne datoteke(pismovne, \n"
"virtualne pismovne datoteke) pokvarene.\n"
"KDVI će prekinuti s radom nakon ove poruke. Ukoliko \n"
"smatrate da ste pronašli bug, ili da bi se KDVI trebao\n"
"ponašati bolje u danoj situaciji, molim prijavite problem."

#: vf.cpp:86
msgid "Checksum mismatch"
msgstr "Checksum neslaganje"

#: vf.cpp:87
msgid " in font file "
msgstr "u pismovnoj datoteci"

#: vf.cpp:132
msgid "Could not allocate memory for a macro table."
msgstr "Ne mogu alocirati memoriju za makro tablicu."

#: vf.cpp:149
msgid "Virtual character "
msgstr "Virtualni znak "

#: vf.cpp:149
msgid " in font "
msgstr " u pismu "

#: vf.cpp:150
msgid " ignored."
msgstr " zanemaren."

#: vf.cpp:180
#, c-format
msgid "Wrong command byte found in VF macro list: %1"
msgstr "Pogrešni naredbeni bajt pronađen u VF nakro popisu: %1"

#: kdvi.kcfg:10
#, fuzzy, no-c-format
msgid ""
"Use MetaFont to generate missing fonts. If in doubt, enable this option."
msgstr "Ako ste u dilemi, uključite ovu opciju."

#: kdvi.kcfg:11
#, no-c-format
msgid ""
"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very "
"specific reason, you probably want to enable this option."
msgstr ""
"Omogućuje KDVI-u korištenje MetaFont-a za izradu bitmap pisma. Ukoliko "
"nemate vrlo specifičnih zahtjeva, ovu opciju vrlo vjerojatno želite "
"uključiti."

#: kdvi.kcfg:15
#, fuzzy, no-c-format
msgid "Show PostScript specials. If in doubt, enable this option."
msgstr "Ako ste u dilemi, uključite ovu opciju."

#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33
#, fuzzy, no-c-format
msgid ""
"Some DVI files contain PostScript graphics. If enabled, KDVI will use the "
"Ghostview PostScript interpreter to display these. You probably want to "
"enable this option, unless you have a DVI-file whose PostScript part is "
"broken, or too large for your machine."
msgstr ""
"Pojedini DVI datoteke koriste PostScript grafiku. Ako je opcija aktivirana, "
"KDVI će koristiti Ghostview, interpreter PostScript-a, za prikazivanje "
"grafike. Vjerojatno želite da aktivirate ovu opciju, osim ako imate DVI "
"datoteka u kome je PostScript dio pokvaren, ili previše zahtjevan za vaš "
"računalo."

#: kdvi.kcfg:20
#, fuzzy, no-c-format
msgid ""
"Use font hinting. You should enable this, if the use of font hinting "
"improves readability on your machine."
msgstr ""
"Provjerite da li korištenje hintovanja pisama poboljšava čitljivost na vašem "
"računalou."

#: kdvi.kcfg:21
#, fuzzy, no-c-format
msgid ""
"Many modern fonts contain &quot;font hinting&quot; information which can be "
"used to improve the appearance of a font on low-resolution displays, such as "
"a computer monitor, or a notebook screen. However, many people find the "
"&quot;improved&quot; fonts quite ugly and prefer to have this option "
"disabled."
msgstr ""
"Mnogi moderni pismoovi sadrže informacije za „hintovanje“ koje mogu "
"poslužiti za poboljšanje izgleda pismoa u prikazima niske rezolucije, kakav "
"je i slika na računaloskom monitoru. Međutim, mnogi ljudi nalaze "
"„poboljšane“ pisma priosobno ružnim i više vole da je ova opcija isključena."

#: kdvi_part.rc:6
#, fuzzy, no-c-format
msgid "Export As"
msgstr "Izvezi kao"

#: optionDialogFontsWidget_base.ui:28
#, fuzzy, no-c-format
msgid "Use font hinting for Type 1 fonts, if available"
msgstr "Koristi Type 1 pisma ako su dostupni"

#: optionDialogFontsWidget_base.ui:31
#, fuzzy, no-c-format
msgid ""
"You should enable this, if the use of font hinting improves readability on "
"your machine."
msgstr ""
"Provjerite da li korištenje hintovanja pisama poboljšava čitljivost na vašem "
"računalou."

#: optionDialogFontsWidget_base.ui:34
#, fuzzy, no-c-format
msgid ""
"Many modern fonts contain \"font hinting\" information which can be used to "
"improve the appearance of a font on low-resolution displays, such as a "
"computer monitor, or a notebook screen. However, many people find the "
"\"improved\" fonts quite ugly and prefer to have this option disabled."
msgstr ""
"Mnogi moderni pismoovi sadrže informacije za „hintovanje“ koje mogu "
"poslužiti za poboljšanje izgleda pismoa u prikazima niske rezolucije, kakav "
"je i slika na računaloskom monitoru. Međutim, mnogi ljudi nalaze "
"„poboljšane“ pisma priosobno ružnim i više vole da je ova opcija isključena."

#: optionDialogSpecialWidget_base.ui:27
#, no-c-format
msgid "Show PostScript specials"
msgstr "Pokaži postscript kodove"

#: optionDialogSpecialWidget_base.ui:30
#, fuzzy, no-c-format
msgid "If in doubt, enable this option."
msgstr "Ako ste u dilemi, uključite ovu opciju."

#: optionDialogSpecialWidget_base.ui:41
#, no-c-format
msgid "Editor for Inverse Search"
msgstr "Uređivač za obrnuto pretraživanje"

#: optionDialogSpecialWidget_base.ui:60
#, no-c-format
msgid "Choose an editor which is used in inverse search."
msgstr "Odaberite uređivač koji će biti korišten u obrnutom pretraživanju."

#: optionDialogSpecialWidget_base.ui:63
#, fuzzy, no-c-format
msgid ""
"<p>Some DVI files contain 'inverse search' information. If such a DVI file "
"is loaded, you can right-click into KDVI and an editor will open, load the "
"TeX file and jump to the correct position. You can select your favorite "
"editor here. If in doubt, 'nedit' is usually a good choice.</p>\n"
"<p>Check the KDVI manual to see how to prepare DVI files which support the "
"inverse search.</p>"
msgstr ""
"<p>Pojedini DVI datoteke sadrže informacije za „inverznu pretragu“. Ako je "
"takav DVI datoteka učitan, možete klikom na desni tipka miša u KDVI-ju "
"otvoriti uređivač koji će učitati TeX datoteka i skočiti na odgovarajuću "
"liniju. Ovdje možete odabrati vaš omiljeni uređivač. Ako ste u dilemi, nedit "
"je veoma dobar odabir.</p>\n"
"<p>Pogledajte uputstvo za KDVI da biste saznali kako da pripremite DVI "
"datotekaove koji podržavaju inverznu pretragu."

#: optionDialogSpecialWidget_base.ui:80
#, no-c-format
msgid "Description:"
msgstr "Opis:"

#: optionDialogSpecialWidget_base.ui:96
#, no-c-format
msgid "Shell command:"
msgstr "&Naredba posredniku:"

#: optionDialogSpecialWidget_base.ui:115
#, no-c-format
msgid ""
"Explains about the editor's capabilities in conjunction with inverse search."
msgstr "Objašnjava uređivačke mogućnosti u skladu s obrnutim pretraživanjem."

#: optionDialogSpecialWidget_base.ui:118
#, fuzzy, no-c-format
msgid ""
"<p>Not all editors are well suited for inverse search. For instance, many "
"editors have no command like 'If the file is not yet loaded, load it. "
"Otherwise, bring the window with the file to the front'. If you are using an "
"editor like this, clicking into the DVI file will always open a new editor, "
"even if the TeX file is already open. Likewise, many editors have no command "
"line argument that would allow KDVI to specify the exact line which you wish "
"to edit.</p>\n"
"<p>If you feel that KDVI's support for a certain editor is inadequate, "
"please contact the Trinity developers at www.trinitydesktop.org.</p>"
msgstr ""
"<p>Nisu svi uređivači pogodni za inverznu pretragu. Na primjer, većina "
"uređivača nema naredbu kao što je „Ako datoteka još uvijek nije učitan, "
"učitaj ga. U suprotnom, dovedi prozor sa datotekaom ispred svih ostalih "
"prozora“. Ako koristite uređivač sa ovom sposobnošću, klikom miša na DVI "
"datoteka uvijek će se otvoriti novi uređivač, čak i ako je TeX datoteka već "
"otvoren. Sosobno, mnogi uređivači nemaju argument naredbne linije kojim bi "
"KDVI mogao da navede točnu liniju koju želite da uredite.</p>\n"
"<p>Ako mislite da KDVI-jeva podrška za neki uređivač nije dobro odrađena, "
"pišite na kebekus@kde.org.</p>"

#: optionDialogSpecialWidget_base.ui:135
#, no-c-format
msgid "Shell-command line used to start the editor."
msgstr "Komandna linija korisničke ljuske korištena za pokretanje uređivača."

#: optionDialogSpecialWidget_base.ui:138
#, fuzzy, no-c-format
msgid ""
"If you are using inverse search, KDVI uses this command line to start the "
"editor. The field '%f' is replaced with the filename, and '%l' is replaced "
"with the line number."
msgstr ""
"Ukoiko koristite obrnuto pretraživanje, KDVI koristi ovu komandnu liniju "
"kako bi pokrenuo uređivač. Polje '%f' je zamijenjeno s imenom datoteke i "
"'%l' je zamijenjen brojem linije."

#: optionDialogSpecialWidget_base.ui:154
#, no-c-format
msgid "Editor:"
msgstr "Uređivač:"

#: optionDialogSpecialWidget_base.ui:170
#, fuzzy, no-c-format
msgid "What is 'inverse search'? "
msgstr "Šta je „inverzna pretraga“?"

#: optionDialogSpecialWidget_base.ui:176
#, fuzzy, no-c-format
msgid "inv-search"
msgstr "inv-pretraga"

#: tips:3
#, fuzzy
msgid "<p>...that KDVI can also load compressed DVI-files? \n"
msgstr "<p>...da DVI također može da učita kompresovane DVI datotekaove? \n"

#: tips:9
msgid ""
"<p>...that you can mark text with the right mouse button and paste it\n"
"into any application?\n"
msgstr ""
"<p>...da možete označiti tekst desnom tipkom miša i prebaciti ga\n"
"u bilo koju aplikaciju?\n"

#: tips:16
msgid ""
"<p>...that KDVI now supports inverse search? You can click into your DVI "
"file \n"
"with the middle mouse button and your editor opens, loads the TeX file, and\n"
"jumps to the proper line! <a href=\"help:/kdvi/inverse-search.html\">The \n"
"manual explains how to set up your editor for this.</a> \n"
msgstr ""
"<p>...da KDVI sada podržava i obrnuto pretraživanje? Možete kliknuti u vašoj "
"DVI datoteci\n"
"srednjom tipkom miša i vaš omiljeni uređivač se pokrene, učita TeX datoteku "
"i skače na odgovarajuću liniju!<a href=\"help:/kdvi/inverse-search.html\"> "
"Priručnik objašnjava podešavanje uređivača.</a> \n"

#: tips:25
msgid ""
"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you "
"can \n"
"jump directly from the TeX file to the associated place in the DVI file. \n"
"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set "
"up \n"
"your editor for this.</a> \n"
msgstr ""

#: tips:34
msgid "<p>...that KDVI now offers full text search? \n"
msgstr "<p>...da KDVI sada podržava potpuno tekstualno pretraživanje? \n"

#: tips:40
msgid ""
"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain "
"text? \n"
msgstr ""
"<p>...da KDVI može spremiti datoteku u DVI, PostScript ili u obliku običnog "
"teksta? \n"

#, fuzzy
#~ msgid "Fonts"
#~ msgstr "PK pismoovi"

#, fuzzy
#~ msgid "&File"
#~ msgstr "DVI datoteka"

#, fuzzy
#~ msgid "&Edit"
#~ msgstr "Uređivač:"

#~ msgid "Text..."
#~ msgstr "Tekst..."

#, fuzzy
#~ msgid "*.txt|Plain Text (Latin 1) (*.txt)"
#~ msgstr "*.txt|Običan tekst (Latin 1) (*.txt)"

#~ msgid "Exporting to text..."
#~ msgstr "Eksportiram u tekst..."

#~ msgid "Loading file %1"
#~ msgstr "Učitavam datoteku %1"

#~ msgid "LaserJet 4 is usually a good choice."
#~ msgstr "LaserJet 4 je obično dobar izbor."

#, fuzzy
#~ msgid "Type of bitmap fonts used. LaserJet 4 is usually a good choice."
#~ msgstr "LaserJet 4 je obično dobar izbor."

#~ msgid "Searching for '%1'..."
#~ msgstr "Tražim '%1'..."

#, fuzzy
#~ msgid "Text Not Found"
#~ msgstr "Tekst nije pronađen"

#~ msgid "<qt>The search string <strong>%1</strong> could not be found.</qt>"
#~ msgstr "<qt>Znakovni niz <strong>%1</strong> nije pronađen.</qt>"

#~ msgid ""
#~ "<qt>The search string <strong>%1</strong> could not be found till the "
#~ "beginning of the document. Should the search be restarted from the end of "
#~ "the document?</qt>"
#~ msgstr ""
#~ "<qt>Znakovni niz <strong>%1</strong> nije pronađen do početka dokumenta. "
#~ "Dali da nastavim pretraživanje od kraja dokumenta?</qt>"

#~ msgid "About KDVI"
#~ msgstr "O KDVI-ju"

#, fuzzy
#~ msgid "KDVI Handbook"
#~ msgstr "Priručnik za KDVI"

#, fuzzy
#~ msgid "Report Bug in KDVI..."
#~ msgstr "Prijavite grešku u KDVI-ju..."

#~ msgid "the KDVI plugin"
#~ msgstr "KDVI umetak (plugin)"

#~ msgid "Authors"
#~ msgstr "Autori"

#~ msgid "Font Generation"
#~ msgstr "Stvaranje pisma"

#~ msgid ""
#~ "There were problems running the kpsewhich program. KDVI will not work if "
#~ "TeX is not installed on your system or if the kpsewhich program cannot be "
#~ "found in the standard search path.\n"
#~ msgstr ""
#~ "Bilo je problema pri izvršavanju kpsewhich programa. KDVI neće raditi "
#~ "ukoliko TeX nije instaliran na vašem sustavu, ili ako se kpsewhich "
#~ "program ne može pronaći u standardnoj pretraživačkoj putanji.\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Experts will find helpful information in the 'Fonts'-section of the "
#~ "document info dialog"
#~ msgstr ""
#~ "\n"
#~ "Stručnjaci će naći korisne informacije u sekciji „Pismoovi“ dijaloga sa "
#~ "informacijama o dokumentu"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Automatic font generation is switched off. You might want to switch it on "
#~ "now and generate the missing fonts."
#~ msgstr ""
#~ "\n"
#~ "Automatsko generiranje pisama je isključeno. Možda ćete želite da ga "
#~ "uključite i tako generišete nedostajuće pisma."

#, fuzzy
#~ msgid "Generate Fonts Now"
#~ msgstr "Generiraj pisma sada"

#~ msgid "Continue Without"
#~ msgstr "Nastavi bez"

#~ msgid "Generate missing fonts"
#~ msgstr "Napravi pisma koja nedostaju"

#~ msgid "Metafont mode:"
#~ msgstr "Metapismo način:"

#, fuzzy
#~ msgid "&DVI Options..."
#~ msgstr "&DVI opcije..."

#~ msgid "Link to %1"
#~ msgstr "Veza na %1"

#, fuzzy
#~ msgid "Continuous"
#~ msgstr "Nastavi bez"

#, fuzzy
#~ msgid "Continuous - Facing"
#~ msgstr "Nastavi bez"

#~ msgid "Go"
#~ msgstr "Idi"

#, fuzzy
#~ msgid "PostScript Type1 Fonts"
#~ msgstr "PostScript Type 1 pismoovi"

#, fuzzy
#~ msgid ""
#~ "On many modern TeX installations, the typical fonts used in a TeX "
#~ "document are included both in the traditional MetaFont- and in the "
#~ "PostScript Type 1 format. If this box is checked, Type 1 fonts will be "
#~ "used if they are found. This will usually save some time and disk space "
#~ "because it is then no longer necessary to run MetaFont and turn the "
#~ "MetaFont fonts into bitmap files. You probably want to enable this "
#~ "option, unless you experience difficulties with the PostScript fonts, "
#~ "such as missing or wrong characters, etc."
#~ msgstr ""
#~ "Na mnogim modernim instalacijama TeX-a, tipični pismoovi koji se koriste "
#~ "u TeX dokumentu uključeni su i u tradicionalnom MetaPismo i u PostScript "
#~ "Type 1 formatu. Ako je ova kućica popunjena, Type 1 pismoovi biti će "
#~ "korišteni ako se pronađu. Ovo će obično spremiti nešto vremena i prostora "
#~ "na disku zato jer više nije neophodno pretvaranje MetaPismo pisama u "
#~ "bitmapirane datotekaove. Vjerojatno ćete želeti da uključite ovu opciju, "
#~ "osim ako ne naletite na neke probleme sa PostScript pismoovima, kao što "
#~ "su nedostajući ili pogrešni znaci, itd."

#, fuzzy
#~ msgid "Use font hinting"
#~ msgstr "Koristi hintovanje pisama"

#~ msgid "Show hyperlinks"
#~ msgstr "Prikaži hiperlinkove"

#, fuzzy
#~ msgid "Show hyperlinks. If in doubt, enable this option"
#~ msgstr "Ako ste u dilemi, uključite ovu opciju."

#, fuzzy
#~ msgid "Use Type 1 fonts if available. If in doubt, enable this option."
#~ msgstr "Ako ste u dilemi, uključite ovu opciju."

#~ msgid ""
#~ "<qt>Failed to copy the DVI-file <strong>%1</strong> to the temporary file "
#~ "<strong>%2</strong>. The export or print command is aborted.</qt>"
#~ msgstr ""
#~ "<qt>Nemogućnost kopiranje DVI datoteke<strong>%1</strong> u privremenu "
#~ "datoteku <strong>%2</strong>. Niredba za izvoz ili ispis je poništena.</"
#~ "qt>"