# translation of tdeprint4.po to Walloon # Ratournaedje e walon des messaedjes di TDE. # # Pablo Saratxaga , 2007. msgid "" msgstr "" "Project-Id-Version: tdeprint4\n" "Report-Msgid-Bugs-To: http://bugs.kde.org\n" "POT-Creation-Date: 2007-08-27 01:12+0200\n" "PO-Revision-Date: 2004-01-12 03:11+0100\n" "Last-Translator: Pablo Saratxaga \n" "Language-Team: Walloon \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: ext/kextprinterimpl.cpp:47 msgid "Empty print command." msgstr "Li cmande di scrijhaedje est vude." #: ext/kmextmanager.cpp:41 msgid "PS_printer" msgstr "Sicrirece PostScript" #: ext/kmextmanager.cpp:43 msgid "PostScript file generator" msgstr "Djenereu d' fitchî PostScript" #: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:28 msgid "Ledger" msgstr "Ledger" #: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:29 msgid "US Legal" msgstr "US Legal" #: kpgeneralpage.cpp:86 lpd/lpdtools.cpp:30 msgid "US Letter" msgstr "US Letter" #: lpd/lpdtools.cpp:31 msgid "A4" msgstr "A4" #: lpd/lpdtools.cpp:32 msgid "A3" msgstr "A3" #: lpd/lpdtools.cpp:33 msgid "B4" msgstr "B4" #: lpd/lpdtools.cpp:34 msgid "B5" msgstr "B5" #: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50 msgid "Enabled" msgstr "En alaedje" #: kpgeneralpage.cpp:415 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52 msgid "Disabled" msgstr "Essocté" #: lpd/lpdtools.cpp:233 msgid "GhostScript settings" msgstr "Apontiaedjes di Ghostscript" #: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 #: management/kmwend.cpp:104 msgid "Driver" msgstr "Mineu" #: lpd/lpdtools.cpp:254 msgid "Resolution" msgstr "Finté" #: lpd/lpdtools.cpp:277 msgid "Color depth" msgstr "Parfondeu di coleur" #: lpd/lpdtools.cpp:301 msgid "Additional GS options" msgstr "Ôtès tchuzes GS" #: driver.cpp:377 kpgeneralpage.cpp:260 lpd/lpdtools.cpp:307 #: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54 #: management/kmwend.cpp:49 msgid "General" msgstr "Djenerå" #: lpd/lpdtools.cpp:313 msgid "Page size" msgstr "Grandeu del pådje" #: lpd/lpdtools.cpp:329 msgid "Pages per sheet" msgstr "Pådjes pa foye" #: lpd/lpdtools.cpp:345 msgid "Left/right margin (1/72 in)" msgstr "Mådjes hintche/droete (e 1/72es di pôce)" #: lpd/lpdtools.cpp:350 msgid "Top/bottom margin (1/72 in)" msgstr "Mådjes å dzeu/å dzo (e 1/72es di pôce)" #: lpd/lpdtools.cpp:356 msgid "Text options" msgstr "Tchuzes pol tecse" #: lpd/lpdtools.cpp:362 msgid "Send EOF after job to eject page" msgstr "Fé moussî l' pådje foû après l' imprimaedje" #: lpd/lpdtools.cpp:370 msgid "Fix stair-stepping text" msgstr "Lîstrer les caracteres" #: lpd/lpdtools.cpp:382 msgid "Fast text printing (non-PS printers only)" msgstr "Imprimer l' tecse radmint (seulmint po les scrireces nén PostScript)" #: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 msgid "" "The %1 executable could not be found in your path. Check your " "installation." msgstr "" "Nén moyén do trover li programe %1 dins vosse tchimin. Verifyîz voste " "astalåcion." #: lpd/kmlpduimanager.cpp:44 msgid "Local printer (parallel, serial, USB)" msgstr "Sicrirece locåle (paralele, séreye, USB)" #: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 #: rlpr/kmwrlpr.cpp:116 msgid "Remote LPD queue" msgstr "Caweye LPD å lon" #: lpd/kmlpduimanager.cpp:46 msgid "SMB shared printer (Windows)" msgstr "Sicrirece pårtaedjeye pa SMB (Windows)" #: lpd/kmlpduimanager.cpp:47 msgid "Network printer (TCP)" msgstr "Sicrirece sol rantoele (TCP)" #: lpd/kmlpduimanager.cpp:48 msgid "File printer (print to file)" msgstr "Sicrirece fitchî (rexhe dins on fitchî)" #: lpd/kmlpdmanager.cpp:87 msgid "Local printer queue (%1)" msgstr "Cawêye di scrijhaedje locåle (%1)" #: lpd/kmlpdmanager.cpp:87 #, fuzzy msgid "" "_: Unknown type of local printer queue\n" "Unknown" msgstr "Nén cnoxhou" #: lpd/kmlpdmanager.cpp:88 msgid "" msgstr "" #: lpd/kmlpdmanager.cpp:89 #, fuzzy msgid "" "_: Unknown Driver\n" "Unknown" msgstr "Nén cnoxhou" #: lpd/kmlpdmanager.cpp:95 msgid "Remote LPD queue %1@%2" msgstr "Caweye LPD å lon %1@%2" #: lpd/kmlpdmanager.cpp:158 msgid "Unable to create spool directory %1 for printer %2." msgstr "" "Nén moyén do fé on ridant di caweye d' imprimaedje %1 po li scrirece %2." #: lpd/kmlpdmanager.cpp:165 msgid "Unable to save information for printer %1." msgstr "Nén moyén do schaper les infôrmåcion po li scrirece %1." #: lpd/kmlpdmanager.cpp:193 msgid "" "Unable to set correct permissions on spool directory %1 for printer %2." msgstr "" "Nén moyén do mete les droets comifåt sol ridant di caweye d' imprimaedje %1 po " "li scrirece %2." #: lpd/kmlpdmanager.cpp:237 msgid "Permission denied: you must be root." msgstr "Vos n' avoz nén l' droet: vos dvoz esse root." #: lpd/kmlpdmanager.cpp:244 msgid "Unable to execute command \"%1\"." msgstr "Nén moyén d' enonder li cmande \"%1\"." #: lpd/kmlpdmanager.cpp:317 msgid "Unable to write printcap file." msgstr "Nén moyén do scrire e fitchî des scrireces." #: lpd/kmlpdmanager.cpp:372 msgid "Couldn't find driver %1 in printtool database." msgstr "" "Dji n' sai trover l' mineu %1 dins l' båze di dnêyes " "printtool." #: lpd/kmlpdmanager.cpp:411 msgid "Couldn't find printer %1 in printcap file." msgstr "" "Dji n' sai trover li scrirece %1 e fitchî printcap." #: lpd/kmlpdmanager.cpp:440 msgid "No driver found (raw printer)" msgstr "Pont d' mineu di trové (imprimaedje brut)" #: lpd/kmlpdmanager.cpp:442 msgid "Printer type not recognized." msgstr "Dji n' ricnoxhe nén cisse sôre di scrirece la." #: lpd/kmlpdmanager.cpp:452 msgid "" "The driver device %1 is not compiled in your GhostScript distribution. " "Check your installation or use another driver." msgstr "" "Li mineu d' l' éndjin %1 n' a nén stî copilé dins vosse modêye di " "Ghostscript. Verifyîz voste astalaedje ou eployîz èn ôte mineu." #: lpd/kmlpdmanager.cpp:560 msgid "Unable to write driver associated files in spool directory." msgstr "" "Nén moyén do bouter les fitchîs ki vont avou l' mineu dvins l' ridant di " "caweyes d' imprimaedje." #: lpr/apshandler.cpp:68 msgid "APS Driver (%1)" msgstr "Mineu APS (%1)" #: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72 msgid "Network printer (%1)" msgstr "Sicrirece rantoele (%1)" #: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276 #: lpr/matichandler.cpp:421 #, fuzzy, c-format msgid "Unsupported backend: %1." msgstr "Accion nén sopoirtêye: %1" #: lpr/apshandler.cpp:221 #, fuzzy, c-format msgid "Unable to create directory %1." msgstr "Dji n' a savou oister l' ridant måjhon %1." #: lpr/apshandler.cpp:241 #, fuzzy, c-format msgid "Missing element: %1." msgstr "Årgumint(s) ki mankèt." #: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323 #, c-format msgid "Invalid printer backend specification: %1" msgstr "" #: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367 #, c-format msgid "Unable to create the file %1." msgstr "Dji n' a savou ahiver l' fitchî %1" #: lpr/apshandler.cpp:322 msgid "The APS driver is not defined." msgstr "Li mineu APS n' est nén defini" #: lpr/apshandler.cpp:380 #, c-format msgid "Unable to remove directory %1." msgstr "Dji n' a savou oister l' ridant måjhon %1." #: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97 msgid "Unknown (unrecognized entry)" msgstr "Nén cnoxhou (intrêye nén ricnoxhowe)" #: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91 msgid "Remote queue (%1) on %2" msgstr "Caweye då lon (%1) so %2" #: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86 #, c-format msgid "Local printer on %1" msgstr "Sicrirece locåle so %1" #: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116 #, fuzzy msgid "Unrecognized entry." msgstr "Nén cnoxhou (intrêye nén ricnoxhowe)" #: lpr/kmlprmanager.cpp:289 msgid "The printcap file is a remote file (NIS). It cannot be written." msgstr "" #: lpr/kmlprmanager.cpp:305 #, fuzzy msgid "" "Unable to save printcap file. Check that you have write permissions for that " "file." msgstr "" "Dji n' sai schaper li fitchî d' imprimaedje dins %1. Loukîz si vs avoz les " "droets k' i fåt so ç' fitchî la." #: lpr/kmlprmanager.cpp:330 #, fuzzy msgid "Internal error: no handler defined." msgstr "Divintrinne aroke: nén moyén do tcherdjî l' passete." #: lpr/kmlprmanager.cpp:344 #, fuzzy msgid "Couldn't determine spool directory. See options dialog." msgstr "Dji n' a savou determiner l' URI d' destinåcion." #: lpr/kmlprmanager.cpp:350 #, fuzzy msgid "" "Unable to create the spool directory %1. Check that you have the required " "permissions for that operation." msgstr "" "Nén moyén d' ahiver l' mineu [%1,%2]. Ça vout dire soeye-t i ki l' mineu n' " "egzistêye nén, soeye-t i ki vs n' avoz nén les droets po fé çoula." #: lpr/kmlprmanager.cpp:382 #, fuzzy, c-format msgid "" "The printer has been created but the print daemon could not be restarted. %1" msgstr "Li prémetowe ou l' dinêye sicrirece n' a nén stî trovêye." #: lpr/kmlprmanager.cpp:410 #, fuzzy msgid "" "Unable to remove spool directory %1. Check that you have write permissions for " "that directory." msgstr "" "Dji n' sai schaper li fitchî d' imprimaedje dins %1. Loukîz si vs avoz les " "droets k' i fåt so ç' fitchî la." #: lpr/kmlprmanager.cpp:458 msgid "&Edit printcap Entry..." msgstr "&Candjî l' intrêye dins printcap..." #: lpr/kmlprmanager.cpp:473 msgid "" "Editing a printcap entry manually should only be done by confirmed system " "administrator. This may prevent your printer from working. Do you want to " "continue?" msgstr "" #: lpr/kmlprmanager.cpp:489 #, fuzzy, c-format msgid "Spooler type: %1" msgstr "Sôre di sori: %1" #: lpr/kmlprjobmanager.cpp:83 msgid "Unsupported operation." msgstr "Operåcion nén sopoirtêye" #: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 #, fuzzy msgid "Spooler" msgstr "Livea pol cawêye:" #: lpr/kmconfiglpr.cpp:34 #, fuzzy msgid "Spooler Settings" msgstr "Apontiaedjes des ridants" #: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291 #: lpr/lpchelper.cpp:314 msgid "The executable %1 couldn't be found in your PATH." msgstr "Li programe %1 n' a nén stî trové dvins vosse tchimin ($PATH)." #: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298 msgid "Permission denied." msgstr "Vos n' avoz nén li permission." #: lpr/lpchelper.cpp:259 msgid "Printer %1 does not exist." msgstr "Li scrirece %1 n' egzistêye nén." #: lpr/lpchelper.cpp:263 #, c-format msgid "Unknown error: %1" msgstr "Aroke nén cnoxhowe: %1" #: lpr/lpchelper.cpp:282 #, fuzzy, c-format msgid "Execution of lprm failed: %1" msgstr "ftpfs: dj' a fwait berwete come dji m' raloyîve å sierveu: %s" #: lpr/lprngtoolhandler.cpp:99 msgid "IFHP Driver (%1)" msgstr "Mineu IFHP (%1)" #: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170 msgid "unknown" msgstr "nén cnoxhou" #: lpr/lprngtoolhandler.cpp:162 msgid "No driver defined for that printer. It might be a raw printer." msgstr "" #: lpr/lprngtoolhandler.cpp:170 #, fuzzy msgid "LPRngTool Common Driver (%1)" msgstr "Mineu APS (%1)" #: lpr/matichandler.cpp:82 msgid "Network printer" msgstr "Sicrirece rantoele" #: lpr/matichandler.cpp:245 #, fuzzy msgid "Internal error." msgstr "Divintrinne aroke" #: cups/kmcupsmanager.cpp:583 lpr/matichandler.cpp:254 #: lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" "Nén moyén di trover li programe foomatic-datafile " "dins vosse variåve $PATH. Waitîz si Footmatic est astalé comifåt." #: cups/kmcupsmanager.cpp:615 lpr/matichandler.cpp:286 #: lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." msgstr "" "Nén moyén d' ahiver l' mineu [%1,%2]. Ça vout dire soeye-t i ki l' mineu n' " "egzistêye nén, soeye-t i ki vs n' avoz nén les droets po fé çoula." #: lpr/matichandler.cpp:339 msgid "" "You probably don't have the required permissions to perform that operation." msgstr "Vos n' avoz nén les bounès permissions po fé ciste operåcion la." #: lpr/matichandler.cpp:426 #, fuzzy msgid "" "Unable to find executable lpdomatic. Check that Foomatic is correctly installed " "and that lpdomatic is installed in a standard location." msgstr "" "Nén moyén di trover li programe foomatic-datafile " "dins vosse variåve $PATH. Waitîz si Footmatic est astalé comifåt." #: lpr/matichandler.cpp:457 #, fuzzy, c-format msgid "Unable to remove driver file %1." msgstr "Nén moyén do oister li scrirece %1." #: lpr/editentrydialog.cpp:40 #, fuzzy msgid "Aliases:" msgstr "Alias" #: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 msgid "String" msgstr "Tchinne" #: lpr/editentrydialog.cpp:47 msgid "Number" msgstr "Limero" #: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 #, fuzzy msgid "Boolean" msgstr "bouleyin" #: lpr/editentrydialog.cpp:72 #, c-format msgid "Printcap Entry: %1" msgstr "Intrêye dins printcap: %1" #: kprintdialog.cpp:97 msgid "" " Printer Location: The Location may describe where the " "selected printer is located. The Location description is created by the " "administrator of the print system (or may be left empty). " msgstr "" #: kprintdialog.cpp:102 msgid "" " Printer Type: The Type indicates your printer type. " msgstr "" #: kprintdialog.cpp:104 msgid "" " Printer State: The State indicates the state of the print " "queue on the print server (which could be your localhost). The state may be " "'Idle', 'Processing', 'Stopped', 'Paused' or similar. " msgstr "" #: kprintdialog.cpp:108 msgid "" " Printer Comment: The Comment may describe the selected " "printer. This comment is created by the administrator of the print system (or " "may be left empty). " msgstr "" #: kprintdialog.cpp:112 msgid "" " Printer Selection Menu: " "

Use this combo box to select the printer to which you want to print. " "Initially (if you run TDEPrint for the first time), you may only find the " "TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

    " "
  • ...either create a local printer with the help of the " "TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " "printing systems (click button to the left of the 'Properties' " "button),
    • " "
  • ...or try to connect to an existing remote CUPS print server. You can " "connect by clicking the 'System Options' button below. A new dialog " "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.
" "

Note: It may happen that you successfully connected to a remote CUPS " "server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " "the drop-down menu at bottom of this dialog when fully expanded).

" msgstr "" #: kprintdialog.cpp:137 msgid "" " Print Job Properties: " "

This button opens a dialog where you can make decisions regarding all " "supported print job options. " msgstr "" #: kprintdialog.cpp:141 msgid "" " Selective View on List of Printers: " "

This button reduces the list of visible printers to a shorter, more " "convenient, pre-defined list.

" "

This is particularly useful in enterprise environments with lots of " "printers. The default is to show all printers.

" "

To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " "TDE Print Configuration dialog) and setup your selection..

" "

Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

" msgstr "" #: kprintdialog.cpp:154 msgid "" "TDE Add Printer Wizard " "

This button starts the TDE Add Printer Wizard.

" "

Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

" "

Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

" msgstr "" #: kprintdialog.cpp:163 msgid "" " External Print Command " "

Here you can enter any command that would also print for you in a " "konsole window.

Example: " "
a2ps -P <printername> --medium=A3
. " msgstr "" #: kprintdialog.cpp:168 msgid "" " Additional Print Job Options " "

This button shows or hides additional printing options." msgstr "" #: kprintdialog.cpp:170 msgid "" " System Options: " "

This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

    " "
  • Should TDE applications embed all fonts into the PostScript they generate " "for printing? " "
  • Should TDE use an external PostScript viewer like gv " "for print page previews? " "
  • Should TDEPrint use a local or a remote CUPS server?,
" "and many more.... " msgstr "" #: kprintdialog.cpp:182 msgid "" " Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" #: kprintdialog.cpp:186 msgid "" " Cancel: This button cancels your print job and quits the kprinter " "dialog. " msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " "are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" #: kprintdialog.cpp:196 msgid "" " Keep Printing Dialog Open" "

If you enable this checkbox, the printing dialog stays open after you hit " "the Print button.

" "

This is especially useful, if you need to test various print settings (like " "color matching for an inkjet printer) or if you want to send your job to " "multiple printers (one after the other) to have it finished more quickly.

" "" msgstr "" #: kprintdialog.cpp:206 msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " "of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" #: kprintdialog.cpp:214 msgid "" " Output File Name and Path: Edit this line to create a path and " "filename that suits your needs. (Button and Lineedit field are only available " "if you \"Print to File\") " msgstr "" #: kprintdialog.cpp:219 msgid "" " Browse Directories button: This button calls the \"File Open / " "Browsed Directories\" dialog to let you choose a directory and file name where " "your \"Print-to-File\" job should be saved. " msgstr "" #: kprintdialog.cpp:225 msgid "" " Add File to Job " "

This button calls the \"File Open / Browse Directories\" dialog to allow you " "to select a file for printing. Note, that " "

    " "
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " "PNG, GIF and many other graphical formats. " "
  • you can select various files from different paths and send them as one " "\"multi-file job\" to the printing system.
" msgstr "" #: kprintdialog.cpp:237 msgid "" " Print Preview Enable this checkbox if you want to see a preview of " "your printout. A preview lets you check if, for instance, your intended " "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

Note: The preview feature (and therefore this checkbox) is only " "visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " "non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" #: kprintdialog.cpp:250 msgid "" " Set as Default Printer This button sets the current printer as the " "user's default. " "

Note: (Button is only visible if the checkbox for " "System Options --> General --> Miscellaneous: " "\"Defaults to the last printer used in the application\" " "is disabled.) " msgstr "" #: kprintdialog.cpp:265 management/kmmainview.cpp:290 management/kmwend.cpp:90 #: management/smbview.cpp:43 msgid "Printer" msgstr "Sicrirece" #: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 #: management/kxmlcommanddlg.cpp:114 msgid "&Name:" msgstr "&No:" #: kprintdialog.cpp:280 management/kminfopage.cpp:50 msgid "" "_: Status\n" "State:" msgstr "Estat:" #: kprintdialog.cpp:282 management/kminfopage.cpp:48 msgid "Type:" msgstr "Sôre:" #: kprintdialog.cpp:284 management/kmwname.cpp:40 msgid "Location:" msgstr "Eplaeçmint:" #: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 msgid "Comment:" msgstr "Rawete:" #: kprintdialog.cpp:289 msgid "P&roperties" msgstr "P&rôpietés" #: kprintdialog.cpp:291 msgid "System Op&tions" msgstr "Tchuzes do &sistinme" #: kprintdialog.cpp:293 msgid "Set as &Default" msgstr "Mete come &prémetou" #: kprintdialog.cpp:300 msgid "Toggle selective view on printer list" msgstr "Discandjî l' vuwe selective del djivêye des scrireces" #: kprintdialog.cpp:305 msgid "Add printer..." msgstr "Radjouter scrirece..." #: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 msgid "&Print" msgstr "&Imprimer" #: kprintdialog.cpp:313 msgid "Previe&w" msgstr "Préve&y" #: kprintdialog.cpp:315 msgid "O&utput file:" msgstr "Fitchî di re&xhowe:" #: kprintdialog.cpp:321 msgid "Print co&mmand:" msgstr "&Kimande po-z imprimer:" #: kprintdialog.cpp:330 msgid "Show/hide advanced options" msgstr "Mostrer/catchî les spepieusès tchuzes" #: kprintdialog.cpp:332 msgid "&Keep this dialog open after printing" msgstr "" "&Wårder ci purnea ci drovou après ki l' imprimaedje sol sicrirece est fwait" #: kprintdialog.cpp:551 kprintdialog.cpp:939 msgid "An error occurred while retrieving the printer list:" msgstr "Åk n' a nén stî come dji rapexhive li djivêye des scrireces:" #: kprintdialog.cpp:715 msgid "The output filename is empty." msgstr "Li no do fitchî d' rexhowe est vude." #: kprintdialog.cpp:754 msgid "You don't have write permissions to this file." msgstr "Vos n' avoz nén les droets po scrire dins ç' fitchî la." #: kprintdialog.cpp:760 msgid "The output directory does not exist." msgstr "Li li ridant di rexhowe n' egzistêye nén." #: kprintdialog.cpp:762 msgid "You don't have write permissions in that directory." msgstr "Vos n' avoz nén les droets po scrire dins ç' ridant la." #: kprintdialog.cpp:874 msgid "&Options <<" msgstr "&Tchuzes <<" #: kprintdialog.cpp:887 msgid "&Options >>" msgstr "&Tchuzes >>" #: kprintdialog.cpp:929 msgid "Initializing printing system..." msgstr "Dj' enonde li sistinme d' imprimaedje..." #: kprintdialog.cpp:965 msgid "Print to File" msgstr "Imprimer divins on fitchî" #: kmprinter.cpp:197 kprintdialog.cpp:983 msgid "All Files" msgstr "Tos les fitchîs" #: cups/kpschedulepage.cpp:40 msgid "" " " "

Print Job Billing and Accounting

" "

Insert a meaningful string here to associate the current print job with a " "certain account. This string will appear in the CUPS \"page_log\" to help with " "the print accounting in your organization. (Leave it empty if you do not need " "it.) " "

It is useful for people who print on behalf of different \"customers\", " "like print service bureaux, letter shops, press and prepress companies, or " "secretaries who serve different bosses, etc.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-billing=...         # example: \"Marketing_Department\" or "
"\"Joe_Doe\"

" msgstr "" #: cups/kpschedulepage.cpp:60 msgid "" " " "

Scheduled Printing

" "

Scheduled printing lets you control the time of the actual printout, while " "you can still send away your job now and have it out of your way. " "

Especially useful is the \"Never (hold indefinitely)\" option. It allows " "you to park your job until a time when you (or a printer administrator) decides " "to manually release it. " "

This is often required in enterprise environments, where you normally are " "not allowed to directly and immediately access the huge production printers in " "your Central Repro Department. However it is okay to send jobs to the " "queue which is under the control of the operators (who, after all, need to make " "sure that the 10,000 sheets of pink paper which is required by the Marketing " "Department for a particular job are available and loaded into the paper " "trays).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
"

" msgstr "" #: cups/kpschedulepage.cpp:87 msgid "" " " "

Page Labels

" "

Page Labels are printed by CUPS at the top and bottom of each page. They " "appear on the pages surrounded by a little frame box. " "

They contain any string you type into the line edit field.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-label=\"...\"      # example: \"Company Confidential\"
" "

" msgstr "" #: cups/kpschedulepage.cpp:102 msgid "" " " "

Job Priority

" "

Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " "First In, First Out. " "

The job priority option allows you to re-order the queue according to your " "needs. " "

It works in both directions: you can increase as well as decrease " "priorities. (Usually you can only control your own jobs). " "

Since the default job priority is \"50\", any job sent with, for example, " "\"49\" will be printed only after all those others have finished. Conversely, a " "\"51\" or higher priority job will go right to the top of a populated queue (if " "no other, higher prioritized one is present).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
" "

" msgstr "" #: cups/kpschedulepage.cpp:126 msgid "Advanced Options" msgstr "Sipepieusès tchuzes" #: cups/kpschedulepage.cpp:137 msgid "Immediately" msgstr "Tot d' shûte" #: cups/kpschedulepage.cpp:138 msgid "Never (hold indefinitely)" msgstr "Måy (ritni disk' a todi)" #: cups/kpschedulepage.cpp:139 msgid "Daytime (6 am - 6 pm)" msgstr "Eure del djournêye (6 e. å matén - 6 e. al nute)" #: cups/kpschedulepage.cpp:140 msgid "Evening (6 pm - 6 am)" msgstr "Vesprêye (6 e. al nute - 6 e. å matén)" #: cups/kpschedulepage.cpp:141 msgid "Night (6 pm - 6 am)" msgstr "Nute (6 e. al nute - 6 e. å matén)" #: cups/kpschedulepage.cpp:142 msgid "Weekend" msgstr "Li fén di samwinne" #: cups/kpschedulepage.cpp:143 msgid "Second Shift (4 pm - 12 am)" msgstr "Deujhinme tour (4 e. å matén - nonne)" #: cups/kpschedulepage.cpp:144 msgid "Third Shift (12 am - 8 am)" msgstr "Troejhinme tour (nonne - 8 e. al nute)" #: cups/kpschedulepage.cpp:145 msgid "Specified Time" msgstr "Eure metowe" #: cups/kpschedulepage.cpp:160 msgid "&Scheduled printing:" msgstr "Imprimaedje pro&gramé:" #: cups/kpschedulepage.cpp:163 msgid "&Billing information:" msgstr "Infôrmåcion sol &facturaedje:" #: cups/kpschedulepage.cpp:166 msgid "T&op/Bottom page label:" msgstr "Etikete del pådje, al c&opete et al valêye:" #: cups/kpschedulepage.cpp:169 msgid "&Job priority:" msgstr "&Prumiristé del bouye" #: cups/kpschedulepage.cpp:200 msgid "The time specified is not valid." msgstr "Li tins k' vos djhoz n' est nén valåbe" #: cups/kmwbanners.cpp:57 msgid "No Banner" msgstr "Pont d' banire" #: cups/kmwbanners.cpp:58 msgid "Classified" msgstr "Classifyî" #: cups/kmwbanners.cpp:59 msgid "Confidential" msgstr "Sicret" #: cups/kmwbanners.cpp:60 msgid "Secret" msgstr "Sicret" #: cups/kmwbanners.cpp:61 msgid "Standard" msgstr "Standård" #: cups/kmwbanners.cpp:62 msgid "Top Secret" msgstr "Foû scret" #: cups/kmwbanners.cpp:63 msgid "Unclassified" msgstr "Nén classifyî" #: cups/kmwbanners.cpp:86 msgid "Banner Selection" msgstr "Tchoezi les banires" #: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 msgid "&Starting banner:" msgstr "Banire di &tiesse:" #: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 msgid "&Ending banner:" msgstr "Banire di &cou:" #: cups/kmwbanners.cpp:99 msgid "" "

Select the default banners associated with this printer. These banners will " "be inserted before and/or after each print job sent to the printer. If you " "don't want to use banners, select No Banner.

" msgstr "" "

Tchoezixhoz les prémetowès banires po cisse sicrirece ci. Ces banires la " "seront stitcheyes divant eyet/ou après tos les imprimaedjes so li scrirece. Si " "vos n' voloz nole banire, tchoezixhoz Pont d' banire.

" #: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 msgid "&Export" msgstr "&Ebaguer" #: cups/cupsaddsmb2.cpp:61 msgid "Export Printer Driver to Windows Clients" msgstr "Ebaguer l' mineu d' imprimaedje so les cliyints Windows" #: cups/cupsaddsmb2.cpp:72 msgid "&Username:" msgstr "No d' &uzeu:" #: cups/cupsaddsmb2.cpp:73 msgid "&Samba server:" msgstr "Sierveu &Samba:" #: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50 msgid "&Password:" msgstr "Mot di &passe:" #: cups/cupsaddsmb2.cpp:79 msgid "" "

Samba server

Adobe Windows PostScript driver files plus the CUPS " "printer PPD will be exported to the [print$] " "special share of the Samba server (to change the source CUPS server, use the " "Configure Manager -> CUPS server first). The " "[print$] share must exist on the Samba side prior to clicking the " "Export button below." msgstr "" "

Sierveu Samba

Les fitchîs do mineu Adobe Windows PostScript eyet " "l' PPD del sicrirece di CUPS vont esse ebagués viè l' pårtaedje sipeciå " "[print$] do sierveu Samba (po candjî l' sierveu CUPS, eployîz po cmincî li " "Manaedjeu d' apontiaedje -> Sierveu CUPS). Li pårtaedje " "[print$] doet egzister sol sierveu Samba divant do clitchî sol boton " "Ebaguer po dzo." #: cups/cupsaddsmb2.cpp:88 msgid "" "

Samba username

User needs to have write access to the " "[print$] share on the Samba server. [print$] " "holds printer drivers prepared for download to Windows clients. This dialog " "does not work for Samba servers configured with security = share " "(but works fine with security = user)." msgstr "" "

No d' uzeu Samba

L' uzeu doet aveur li droet do scrire sol " "pårtaedje [print$] do sierveu Samba. [print$] " "ritént les mineus di scrirece aprestés po l' abagaedje so les cliyints Windows. " "Ci purnea ni va nén avou les sierveus Samba apontyîs avou " "security = share (mins i va å paire des pôces avou security = user" ")." #: cups/cupsaddsmb2.cpp:96 msgid "" "

Samba password

The Samba setting encrypt passwords = yes " "(default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" "

Sicret po Samba

Pol paramete Samba " "encrypt passwords = yes (prémetou) i vs fåt eployî dvant tot li cmande " "smbpasswd -a [username] por vos aveur on scret Samba ecripté et po Samba " "l' ricnoxhe." #: cups/cupsaddsmb2.cpp:267 #, c-format msgid "Creating folder %1" msgstr "Dj' ahive li ridant %1" #: cups/cupsaddsmb2.cpp:275 #, c-format msgid "Uploading %1" msgstr "Dj' evoye %1" #: cups/cupsaddsmb2.cpp:283 #, c-format msgid "Installing driver for %1" msgstr "Dj' astale li mineu po %1" #: cups/cupsaddsmb2.cpp:291 #, c-format msgid "Installing printer %1" msgstr "Dj' astale li scrirece %1" #: cups/cupsaddsmb2.cpp:333 msgid "Driver successfully exported." msgstr "Li mineu a stî ebagué comifåt." #: cups/cupsaddsmb2.cpp:343 msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb " "manual page for detailed information, you need " "CUPS version 1.1.11 or higher). You may want to try again with another " "login/password." msgstr "" "L' operåcion a fwait berwete. Ça pout esse paski vos n' avoz nén les droets k' " "i fåt ou bén paski Samba est må apontyî. (Waitîz " " CUPS, modêye 1.1.11 ou pus nouve). " "Motoit k' vos duvrîz rsayî avou èn ôte no d' uzeu et èn ôte sicret." #: cups/cupsaddsmb2.cpp:352 msgid "Operation aborted (process killed)." msgstr "Operåcion côpêye (processus touwé)." #: cups/cupsaddsmb2.cpp:358 msgid "

Operation failed.

%1

" msgstr "

L' operåcion a fwait berwete.

%1

" #: cups/cupsaddsmb2.cpp:373 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " "clients through Samba. This operation requires the " "Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " "service on the target server. Click Export to start the operation. Read " "the cupsaddsmb manual page in Konqueror or type " "man cupsaddsmb in a console window to learn more about this " "functionality." msgstr "" "Vos alez aprester li mineu %1 por lu esse pårtaedjî avou Windows gråce a " "Samba. Po çoula, i vs fårè li " "mineu PostScript d' Adobe, ene nouve modêye di Samba 2.2.x eyet on siervice " "SMB ki toûne sol sierveu. Clitchîz Eberweter po cmincî. Léjhoz li pådje " "di manuwel cupsaddsmb " "dins Konqueror ou tapez man cupsaddsmb dins ene conzôle por vos saveur " "cwè et come so cist osti la." #: cups/cupsaddsmb2.cpp:393 msgid "" "Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " "CUPS version 1.1.11 or higher)." msgstr "" "Gn a des fitchîs do mineu ki sont mancants. I gn a moyén delzès trover sol " "waibe da Adobe" ". Loukîz li pådje di manuwel cupsaddsmb " "po saveur di pus (i vos fåt li modêye 1.1 di " "CUPS ou ene pus nouve)." #: cups/cupsaddsmb2.cpp:404 #, c-format msgid "Preparing to upload driver to host %1" msgstr "Dji m' aprestêye a-z eberweter l' mineu sol lodjoe %1" #: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 msgid "&Abort" msgstr "Ri&noncî" #: cups/cupsaddsmb2.cpp:415 msgid "The driver for printer %1 could not be found." msgstr "Dji n' sai trover l' mineu po li scrirece %1." #: cups/cupsaddsmb2.cpp:455 #, c-format msgid "Preparing to install driver on host %1" msgstr "Dji m' aprestêye a-z astaler l' mineu sol lodjoe %1" #: cups/kmwippselect.cpp:36 msgid "Remote IPP Printer Selection" msgstr "Tchoezi li scrirece IPP å lon" #: cups/kmwippselect.cpp:49 msgid "You must select a printer." msgstr "Vos dvoz tchoezi ene sicrirece." #: cups/ipprequest.cpp:110 msgid "You don't have access to the requested resource." msgstr "Vos n' avoz nén l' droet d' accès pol rissource dimandêye." #: cups/ipprequest.cpp:113 msgid "You are not authorized to access the requested resource." msgstr "" "Vos n' avoz nén les droets k' i fåt po-z acceder al rissoûce dimandêye." #: cups/ipprequest.cpp:116 msgid "The requested operation cannot be completed." msgstr "Dji n' a savou ariver å coron di l' operåcion k' vos avoz dmandé." #: cups/ipprequest.cpp:119 msgid "The requested service is currently unavailable." msgstr "Li siervice dimandé n' est nén disponibe pol moumint." #: cups/ipprequest.cpp:122 #, fuzzy msgid "The target printer is not accepting print jobs." msgstr "Li scrirece n' acceptêye nén les bouyes d' imprimaedje pol moumint" #: cups/ipprequest.cpp:233 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running." msgstr "" "Li raloyaedje å sierveu CUPS a fwait berwete. Loukîz si l' sierveu CUPS est " "astalé comifåt et s' i toûne pol moumint." #: cups/ipprequest.cpp:236 msgid "The IPP request failed for an unknown reason." msgstr "Li rcweraedje IPP a fwait berwete dji n' sai douvént." #: cups/ipprequest.cpp:356 msgid "Attribute" msgstr "Atribut" #: cups/ipprequest.cpp:357 msgid "Values" msgstr "Valixhances" #: cups/ipprequest.cpp:388 msgid "True" msgstr "Vraiy" #: cups/ipprequest.cpp:388 msgid "False" msgstr "Fås" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" msgstr "&Moumint:" #: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 msgid "&Size limit (KB):" msgstr "&Grandeu macsimom (Ko):" #: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 msgid "&Page limit:" msgstr "Limite di &pådjes:" #: cups/kmpropquota.cpp:57 msgid "Quotas" msgstr "Cwotas" #: cups/kmpropquota.cpp:58 msgid "Quota Settings" msgstr "Apontiaedje des cwotas" #: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 msgid "No quota" msgstr "Nou cwota" #: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 #: cups/kmwquota.cpp:90 msgid "None" msgstr "Pont" #: cups/kmwipp.cpp:35 msgid "Remote IPP server" msgstr "Sierveu IPP å lon" #: cups/kmwipp.cpp:39 msgid "" "

Enter the information concerning the remote IPP server owning the targeted " "printer. This wizard will poll the server before continuing.

" msgstr "" "

Dinez les infôrmåcions sol sierveu IPP å lon ki li scrirece est da lu. Li " "programe nûton sayrè do trover les sierveu ki polèt esse eployîs divant do " "continouwer.

" #: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 #: rlpr/kmwrlpr.cpp:62 msgid "Host:" msgstr "Lodjoe:" #: cups/kmwipp.cpp:43 msgid "Port:" msgstr "Pôrt:" #: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 msgid "Empty server name." msgstr "Li no do sierveu est vude." #: cups/kmwipp.cpp:59 msgid "Incorrect port number." msgstr "Mwais limero d' pôrt." #: cups/kmwipp.cpp:72 msgid "Unable to connect to %1 on port %2 ." msgstr "Nén moyén di m' raloyî a %1 sol pôrt %2 ." #: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:297 msgid "Banners" msgstr "Banires" #: cups/kmpropbanners.cpp:50 msgid "Banner Settings" msgstr "Tchuzes po les banires" #: cups/ippreportdlg.cpp:34 msgid "IPP Report" msgstr "Rapoirt IPP" #: cups/ippreportdlg.cpp:93 msgid "Internal error: unable to generate HTML report." msgstr "Divintrinne aroke: nén moyén do fé on rapoirt HTML" #: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 msgid "Users Access Settings" msgstr "Apontiaedje des droets des uzeus" #: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 msgid "Users" msgstr "Uzeus" #: cups/kmwusers.cpp:41 msgid "Allowed Users" msgstr "Uzeus ki polèt bén" #: cups/kmwusers.cpp:42 msgid "Denied Users" msgstr "Uzeus ki n' polèt nén" #: cups/kmwusers.cpp:44 msgid "Define here a group of allowed/denied users for this printer." msgstr "" "Definixhoz vaici on hopea d' uzeus ki polèt bén ou ki n' polèt nén eployî cisse " "sicrirece." #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "&Sôre:" #: cups/kptextpage.cpp:41 msgid "" " " "

Characters Per Inch

" "

This setting controls the horizontal size of characters when printing a text " "file.

" "

The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o cpi=...          # example: \"8\" or \"12\"

" msgstr "" #: cups/kptextpage.cpp:55 msgid "" " " "

Lines Per Inch

" "

This setting controls the vertical size of characters when printing a text " "file.

" "

The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o lpi=...         # example \"5\" or \"7\"

" msgstr "" #: cups/kptextpage.cpp:69 msgid "" " " "

Columns

" "

This setting controls how many columns of text will be printed on each page " "when. printing text files.

" "

The default value is 1, meaning that only one column of text per page will " "be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o columns=...     # example: \"2\" or \"4\"

" msgstr "" #: cups/kptextpage.cpp:84 msgid " Preview icon changes when you turn on or off prettyprint. " msgstr "" #: cups/kptextpage.cpp:87 msgid "" " " "

Text Formats

" "

These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

" "

Note: These settings have no effect whatsoever for other input " "formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

. " "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o cpi=...         # example: \"8\" or \"12\"  "
"
     -o lpi=...         # example: \"5\" or \"7\"  "
"
     -o columns=...     # example: \"2\" or \"4\"

" msgstr "" #: cups/kptextpage.cpp:108 msgid "" " " "

Margins

" "

These settings control the margins of printouts on the paper. They are not " "valid for jobs originating from applications which define their own page " "layout internally and send PostScript to TDEPrint (such as KOffice or " "OpenOffice.org).

" "

When printing from TDE applications, such as KMail and Konqueror, or " "printing an ASCII text file through kprinter, you can choose your preferred " "margin settings here.

" "

Margins may be set individually for each edge of the paper. The combo box at " "the bottom lets you change the units of measurement between Pixels, " "Millimeters, Centimeters, and Inches.

" "

You can even use the mouse to grab one margin and drag it to the intended " "position (see the preview picture on the right side).

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o page-top=...      # example: \"72\"  "
"
     -o page-bottom=...   # example: \"24\"  "
"
     -o page-left=...     # example: \"36\"  "
"
     -o page-right=...    # example: \"12\"

" msgstr "" #: cups/kptextpage.cpp:134 msgid "" " " "

Turn Text Printing with Syntax Highlighting (Prettyprint) On!

" "

ASCII text file printouts can be 'prettyfied' by enabling this option. If " "you do so, a header is printed at the top of each page. The header contains " "the page number, job title (usually the filename), and the date. In addition, C " "and C++ keywords are highlighted, and comment lines are italicized.

" "

This prettyprint option is handled by CUPS.

" "

If you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o prettyprint=true.

" msgstr "" #: cups/kptextpage.cpp:153 msgid "" " " "

Turn Text Printing with Syntax Highlighting (Prettyprint) Off!

" "

ASCII text file printing with this option turned off are appearing without a " "page header and without syntax highlighting. (You can still set the page " "margins, though.)

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o prettyprint=false

" msgstr "" #: cups/kptextpage.cpp:167 msgid "" " " "

Print Text with Syntax Highlighting (Prettyprint)

" "

ASCII file printouts can be 'prettyfied' by enabling this option. If you do " "so, a header is printed at the top of each page. The header contains the page " "number, job title (usually the filename), and the date. In addition, C and C++ " "keywords are highlighted, and comment lines are italicized.

" "

This prettyprint option is handled by CUPS.

" "

If you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o prettyprint=true.  "
"
     -o prettyprint=false

" msgstr "" #: cups/kptextpage.cpp:188 msgid "Text" msgstr "Tecse" #: cups/kptextpage.cpp:191 msgid "Text Format" msgstr "Cogne do tecse" #: cups/kptextpage.cpp:193 msgid "Syntax Highlighting" msgstr "Metaedje e valeur del sintacse" #: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45 msgid "Margins" msgstr "Mådjes" #: cups/kptextpage.cpp:200 msgid "&Chars per inch:" msgstr "&Letes pa pôce:" #: cups/kptextpage.cpp:204 msgid "&Lines per inch:" msgstr "&Royes pa pôce:" #: cups/kptextpage.cpp:208 msgid "C&olumns:" msgstr "C&olones:" #: cups/kptextpage.cpp:216 msgid "&Disabled" msgstr "E&ssocté" #: cups/kptextpage.cpp:218 msgid "&Enabled" msgstr "En &alaedje" #: cups/kmconfigcupsdir.cpp:34 msgid "Folder" msgstr "Ridant" #: cups/kmconfigcupsdir.cpp:35 msgid "CUPS Folder Settings" msgstr "Apontiaedje do ridant CUPS" #: cups/kmconfigcupsdir.cpp:38 msgid "Installation Folder" msgstr "Ridant d' astalaedje" #: cups/kmconfigcupsdir.cpp:41 msgid "Standard installation (/)" msgstr "Astalaedje sitandård (/)" #: cups/kptagspage.cpp:36 msgid "" " " "

Additional Tags

You may send additional commands to the CUPS " "server via this editable list. There are 3 purposes for this: " "
    " "
  • Use any current or future standard CUPS job option not supported by the " "TDEPrint GUI.
    • " "
  • Control any custom job option you may want to support in custom CUPS " "filters and backends plugged into the CUPS filtering chain.
    • " "
  • Send short messages to the operators of your production printers in your " "Central Repro Department.
" "

Standard CUPS job options: A complete list of standard CUPS job " "options is in the CUPS User Manual" ". Mappings of the kprinter user interface widgets to respective CUPS job " "option names are named in the various WhatsThis help items..

" "

Custom CUPS job options: CUPS print servers may be customized with " "additional print filters and backends which understand custom job options. You " "can specify such custom job options here. If in doubt, ask your system " "administrator..

" "

" "

Operator Messages: You may send additional messages to the " "operator(s) of your production printers (e.g. in your " "Central Repro Department

) Messages can be read by the operator(s) (or " "yourself) by viewing the \"Job IPP Report\" for the job.

" "Examples:" "
" "
 A standard CUPS job option:"
"
    (Name) number-up                -- (Value) 9                     "
"
 "
"
 A job option for custom CUPS filters or backends:"
"
    (Name) DANKA_watermark          -- "
"(Value) Company_Confidential   "
"
 "
"
 A message to the operator(s):"
"
    (Name) Deliver_after_completion -- "
"(Value) to_Marketing_Departm."
"
" "

Note: the fields must not include spaces, tabs or quotes. You may " "need to double-click on a field to edit it. " "

Warning: Do not use such standard CUPS option names which also can be " "used through the TDEPrint GUI. Results may be unpredictable if they conflict, " " or if they are sent multiple times. For all options supported by the GUI, " "please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " "option name.)

" msgstr "" #: cups/kptagspage.cpp:77 msgid "Additional Tags" msgstr "Ôtès etiketes" #: cups/kptagspage.cpp:82 tdefilelist.cpp:101 kpfilterpage.cpp:406 #: management/kmjobviewer.cpp:237 management/kmwend.cpp:51 #: management/kxmlcommanddlg.cpp:141 management/kxmlcommanddlg.cpp:545 msgid "Name" msgstr "No" #: cups/kptagspage.cpp:83 msgid "Value" msgstr "Valixhance" #: cups/kptagspage.cpp:92 msgid "Read-Only" msgstr "Lére seulmint" #: cups/kptagspage.cpp:115 msgid "The tag name must not contain any spaces, tabs or quotes: %1." msgstr "" "I n' pout pont aveur d' espåçmint, ni tabulåcion ni wiyemets, pol no di " "l' etikete: %1." #: cups/kmcupsuimanager.cpp:85 msgid "" "" "

Print queue on remote CUPS server

" "

Use this for a print queue installed on a remote machine running a CUPS " "server. This allows to use remote printers when CUPS browsing is turned off.

" "" msgstr "" #: cups/kmcupsuimanager.cpp:92 msgid "" "" "

Network IPP printer

" "

Use this for a network-enabled printer using the IPP protocol. Modern " "high-end printers can use this mode. Use this mode instead of TCP if your " "printer can do both.

" msgstr "" #: cups/kmcupsuimanager.cpp:99 msgid "" "" "

Fax/Modem printer

" "

Use this for a fax/modem printer. This requires the installation of the fax4CUPS " "backend. Documents sent on this printer will be faxed to the given target fax " "number.

" msgstr "" #: cups/kmcupsuimanager.cpp:106 msgid "" "" "

Other printer

" "

Use this for any printer type. To use this option, you must know the URI of " "the printer you want to install. Refer to the CUPS documentation for more " "information about the printer URI. This option is mainly useful for printer " "types using 3rd party backends not covered by the other possibilities.

" msgstr "" #: cups/kmcupsuimanager.cpp:114 msgid "" "" "

Class of printers

" "

Use this to create a class of printers. When sending a document to a class, " "the document is actually sent to the first available (idle) printer in the " "class. Refer to the CUPS documentation for more information about class of " "printers.

" msgstr "" #: cups/kmcupsuimanager.cpp:127 msgid "Re&mote CUPS server (IPP/HTTP)" msgstr "Sierveu &CUPS å lon (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:128 msgid "Network printer w/&IPP (IPP/HTTP)" msgstr "Sicrirece rantoele a&vou IPP (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:129 msgid "S&erial Fax/Modem printer" msgstr "Sicrirece &facs/modem séreye" #: cups/kmcupsuimanager.cpp:130 msgid "Other &printer type" msgstr "Ôte &sôre di scrirece" #: cups/kmcupsuimanager.cpp:132 msgid "Cl&ass of printers" msgstr "C&lasse di scrireces" #: cups/kmcupsuimanager.cpp:169 #, fuzzy msgid "An error occurred while retrieving the list of available backends:" msgstr "Åk n' a nén stî come dji rapexhive li djivêye des scrireces:" #: cups/kmcupsuimanager.cpp:215 msgid "Priority" msgstr "Prumiristé" #: cups/kmcupsuimanager.cpp:217 msgid "Billing Information" msgstr "Infôrmåcion pol facturaedje" #: cups/kmwfax.cpp:37 msgid "Fax Serial Device" msgstr "Éndjin facs séreye" #: cups/kmwfax.cpp:41 msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "

Tchoezixhoz l' éndjin k' vosse facs/modem est raloyî après.

" #: cups/kmwfax.cpp:71 msgid "You must select a device." msgstr "Vos dvoz tchoezi èn éndjin." #: cups/kmcupsmanager.cpp:768 msgid "Library cupsdconf not found. Check your installation." msgstr "" "Nén moyén do trover l' livreye «libcupsdconf». Verifyîz voste astalaedje." #: cups/kmcupsmanager.cpp:774 msgid "Symbol %1 not found in cupsdconf library." msgstr "Nén moyén do trover l' simbole «%1» dins l' livreye «libcupsdconf»." #: cups/kmcupsmanager.cpp:849 msgid "&Export Driver..." msgstr "&Ebaguer mineu..." #: cups/kmcupsmanager.cpp:851 msgid "&Printer IPP Report" msgstr "Ra&poirt po li scrirece IPP" #: cups/kmcupsmanager.cpp:897 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "Rapoirt IPP po %1" #: cups/kmcupsmanager.cpp:901 msgid "Unable to retrieve printer information. Error received:" msgstr "" "Nén moyén d' obtini des infôrmåcions so li scrirece. Vochal li messaedje:" #: cups/kmcupsmanager.cpp:914 msgid "Server" msgstr "Sierveu" #: cups/kmcupsmanager.cpp:954 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %1." msgstr "" "Dji n' m' a savou raloyî å sierveu CUPS. Waitîz si l' sierveu CUPS est bén " "astalé et en alaedje. Aroke: %1." #: cups/kmcupsmanager.cpp:955 msgid "the IPP request failed for an unknown reason" msgstr "Li rcwesse IPP a fwait berwete dji n' sai douvént." #: cups/kmcupsmanager.cpp:989 msgid "connection refused" msgstr "Raloyaedje rifuzé" #: cups/kmcupsmanager.cpp:992 msgid "host not found" msgstr "lodjoe nén trové" #: cups/kmcupsmanager.cpp:996 #, fuzzy msgid "read failed (%1)" msgstr "L' evoyaedje a fwait berwete: %s" #: cups/kmcupsmanager.cpp:1000 #, fuzzy msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %2: %1." msgstr "" "Dji n' m' a savou raloyî å sierveu CUPS. Waitîz si l' sierveu CUPS est bén " "astalé et en alaedje. Aroke: %2: %1" #: cups/kphpgl2page.cpp:33 msgid "" " Print in Black Only (Blackplot) " "

The 'blackplot' option specifies that all pens should plot in black-only: " "The default is to use the colors defined in the plot file, or the standard pen " "colors defined in the HP-GL/2 reference manual from Hewlett Packard.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o blackplot=true

" msgstr "" #: cups/kphpgl2page.cpp:48 msgid "" " Scale Print Image to Page Size " "

The 'fitplot' option specifies that the HP-GL image should be scaled to fill " " exactly the page with the (elsewhere selected) media size.

" "

The default is 'fitplot is disabled'. The default will therefore use the " "absolute distances specified in the plot file. (You should be aware that HP-GL " "files are very often CAD drawings intended for large format plotters. On " "standard office printers they will therefore lead to the drawing printout " "being spread across multiple pages.)

" "

Note:This feature depends upon an accurate plot size (PS) command in " "the HP-GL/2 file. If no plot size is given in the file the filter converting " "the HP-GL to PostScript assumes the plot is ANSI E size.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o fitplot=true

" msgstr "" #: cups/kphpgl2page.cpp:68 msgid "" " Set Pen Width for HP-GL (if not defined in file). " "

The pen width value can be set here in case the original HP-GL file does not " "have it set. The pen width specifies the value in micrometers. The default " "value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " "width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " "wide.

" "

Note: The penwidth option set here is ignored if the pen widths are " "set inside the plot file itself..

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o penwidth=...   # example: \"2000\" or \"500\"

" msgstr "" #: cups/kphpgl2page.cpp:85 msgid "" " HP-GL Print Options " "

All options on this page are only applicable if you use TDEPrint to send " "HP-GL and HP-GL/2 files to one of your printers.

" "

HP-GL and HP-GL/2 are page description languages developed by " "Hewlett-Packard to drive Pen Plotting devices.

" "

TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " "it on any installed printer.

" "

Note 1: To print HP-GL files, start 'kprinter' and simply load the " "file into the running kprinter.

" "

Note 2: The 'fitplot' parameter provided on this dialog does also " "work for printing PDF files (if your CUPS version is more recent than " "1.1.22).

" "
" "
" "

Additional hint for power users: These TDEPrint GUI elements " "match with CUPS commandline job option parameters: " "

     -o blackplot=...  # examples: \"true\" or \"false\"  "
"
     -o fitplot=...    # examples: \"true\" or \"false\"  "
"
     -o penwidth=...   # examples: \"true\" or \"false\"

" msgstr "" #: cups/kphpgl2page.cpp:113 msgid "HP-GL/2 Options" msgstr "Tchuzes HP-GL/2" #: cups/kphpgl2page.cpp:115 msgid "&Use only black pen" msgstr "N' eployî k' ene &noere pene" #: cups/kphpgl2page.cpp:118 msgid "&Fit plot to page" msgstr "Adjuster l' &grafe dins l' pådje" #: cups/kphpgl2page.cpp:122 msgid "&Pen width:" msgstr "&Lårdjeu del pene:" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" msgstr "Infôrmåcions sol sicrirece IPP" #: cups/kmwippprinter.cpp:55 msgid "&Printer URI:" msgstr "&Sicrirece URI:" #: cups/kmwippprinter.cpp:64 msgid "" "

Either enter the printer URI directly, or use the network scanning " "facility.

" msgstr "" "

Tapez l' URI tot droet ou don bén eployîz l' usteye di corwaitaedje del " "rantoele.

" #: cups/kmwippprinter.cpp:65 msgid "&IPP Report" msgstr "Rapoirt &IPP" #: cups/kmwippprinter.cpp:112 msgid "You must enter a printer URI." msgstr "Vos dvoz dner l' URI d' ene sicrirece." #: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:116 msgid "No printer found at this address/port." msgstr "Nole sicrirece di trovêye a ç' pôrt ou ciste adresse la." #: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:135 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" msgstr "" #: cups/kmwippprinter.cpp:173 msgid "Name: %1
" msgstr "No: %1
" #: cups/kmwippprinter.cpp:174 msgid "Location: %1
" msgstr "Eplaeçmint: %1
" #: cups/kmwippprinter.cpp:175 msgid "Description: %1
" msgstr "Discrijhaedje:: %1
" #: cups/kmwippprinter.cpp:182 msgid "Model: %1
" msgstr "Modele: %1
" #: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 msgid "Idle" msgstr "Èn fwait rén" #: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 msgid "Stopped" msgstr "Aresté" #: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 msgid "Processing..." msgstr "Dj' overe..." #: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 #, fuzzy msgid "" "_: Unknown State\n" "Unknown" msgstr "Nén cnoxhou / Nén cnoxhou" #: cups/kmwippprinter.cpp:192 msgid "State: %1
" msgstr "Estat: %1
" #: cups/kmwippprinter.cpp:199 #, c-format msgid "Unable to retrieve printer info. Printer answered:

%1" msgstr "" "Dji n' sai obtini des informåcions so li scrirece. Li scrirece a respondou:" "
" "
%1" #: cups/kmwippprinter.cpp:222 msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)." msgstr "" "Nén moyén do fé on rapoirt. Li rcweraedje IPP a fwait berwete tot-z evoyant l' " "messaedje: %1 (0x%2)." #: cups/kmwother.cpp:41 msgid "URI Selection" msgstr "Tchoezi l' URI" #: cups/kmwother.cpp:46 msgid "" "

Enter the URI corresponding to the printer to be installed. Examples:

" "
    " "
  • smb://[login[:passwd]@]server/printer
    • " "
  • lpd://server/queue
    • " "
  • parallel:/dev/lp0
" msgstr "" "

Tapez l' URI del sicrirece a-z astaler. Metans:

" "
    " "
  • smb://[login[:passwd]@]server/printer
    • " "
  • lpd://server/queue
    • " "
  • parallel:/dev/lp0
" #: cups/kmwother.cpp:51 management/kminfopage.cpp:52 #: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54 msgid "URI:" msgstr "URI:" #: cups/kmwother.cpp:78 msgid "CUPS Server %1:%2" msgstr "Sierveu CUPS %1:%2" #: cups/kmcupsconfigwidget.cpp:65 msgid "Server Information" msgstr "Infôrmåcions sol sierveu" #: cups/kmcupsconfigwidget.cpp:66 msgid "Account Information" msgstr "Infôrmåcions sol conte" #: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 msgid "&Host:" msgstr "&Lodjoe:" #: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 #: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 msgid "&Port:" msgstr "&Pôrt:" #: cups/kmcupsconfigwidget.cpp:75 msgid "&User:" msgstr "&Uzeu:" #: cups/kmcupsconfigwidget.cpp:76 msgid "Pass&word:" msgstr "&Sicret:" #: cups/kmcupsconfigwidget.cpp:79 msgid "&Store password in configuration file" msgstr "&Wårder li scret dins l' fitchî d' apontiaedje." #: cups/kmcupsconfigwidget.cpp:81 msgid "Use &anonymous access" msgstr "Eployî ene &intrêye anonime" #: cups/kmwquota.cpp:46 msgid "second(s)" msgstr "segonde(s)" #: cups/kmwquota.cpp:47 msgid "minute(s)" msgstr "munute(s)" #: cups/kmwquota.cpp:48 msgid "hour(s)" msgstr "eure(s)" #: cups/kmwquota.cpp:49 msgid "day(s)" msgstr "djoû(s)" #: cups/kmwquota.cpp:50 msgid "week(s)" msgstr "samwinne(s)" #: cups/kmwquota.cpp:51 msgid "month(s)" msgstr "moes" #: cups/kmwquota.cpp:79 msgid "Printer Quota Settings" msgstr "Apontiaedje po les cwotas des scrireces" #: cups/kmwquota.cpp:104 msgid "" "

Set here the quota for this printer. Using limits of 0 " "means that no quota will be used. This is equivalent to set quota period to " "No quota (-1). Quota limits are defined on a per-user base and " "applied to all users.

" msgstr "" "

Definixhoz vaici li cwota po ci scrirece la. Si vs dijhoz 0 " "come limite, ça vout dire k' i gn a nou cwota (ça rvént å minme ki do defini li " "moumint do cwota come Pont d' cwota (-1)). Les limites di cwota sont " "metowes po tchaeke uzeu est sont valåbes po tos les uzeus.

" #: cups/kmwquota.cpp:130 msgid "You must specify at least one quota limit." msgstr "Vos dvoz dner pol moens ene limite di cwota." #: cups/kmconfigcups.cpp:32 msgid "CUPS Server" msgstr "Sierveu CUPS" #: cups/kmconfigcups.cpp:33 msgid "CUPS Server Settings" msgstr "Apontiaedje do sierveu CUPS" #: cups/kmpropusers.cpp:55 msgid "Denied users" msgstr "Uzeus ki n' polèt nén" #: cups/kmpropusers.cpp:62 msgid "Allowed users" msgstr "Uzeu ki polèt bén" #: cups/kmpropusers.cpp:76 msgid "All users allowed" msgstr "Tos les uzeus polèt bén" #: cups/kpimagepage.cpp:44 msgid "" " " "

Brightness: Slider to control the brightness value of all colors " "used.

" "

The brightness value can range from 0 to 200. Values greater than 100 will " "lighten the print. Values less than 100 will darken the print.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o brightness=...      # use range from \"0\" to \"200\"

" "" msgstr "" #: cups/kpimagepage.cpp:58 msgid "" " " "

Hue (Tint): Slider to control the hue value for color rotation.

" "

The hue value is a number from -360 to 360 and represents the color hue " "rotation. The following table summarizes the change you will see for the base " "colors: " "

" "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " "
Originalhue=-45hue=45
RedPurpleYellow-orange
GreenYellow-greenBlue-green
YellowOrangeGreen-yellow
BlueSky-bluePurple
MagentaIndigoCrimson
CyanBlue-greenLight-navy-blue
" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o hue=...     # use range from \"-360\" to \"360\"

" msgstr "" #: cups/kpimagepage.cpp:83 msgid "" " " "

Saturation: Slider to control the saturation value for all colors " "used.

" "

The saturation value adjusts the saturation of the colors in an image, " "similar to the color knob on your television. The color saturation value.can " "range from 0 to 200. On inkjet printers, a higher saturation value uses more " "ink. On laserjet printers, a higher saturation uses more toner. A color " "saturation of 0 produces a black-and-white print, while a value of 200 will " "make the colors extremely intense.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o saturation=...      # use range from \"0\" to \"200\"

" "" msgstr "" #: cups/kpimagepage.cpp:101 msgid "" " " "

Gamma: Slider to control the gamma value for color correction.

" "

The gamma value can range from 1 to 3000. A gamma values greater than 1000 " "lightens the print. A gamma value less than 1000 darken the print. The default " "gamma is 1000.

" "

Note:

the gamma value adjustment is not visible in the thumbnail " "preview.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o gamma=...      # use range from \"1\" to \"3000\"

" "" msgstr "" #: cups/kpimagepage.cpp:118 msgid "" " " "

Image Printing Options

" "

All options controlled on this page only apply to printing images. Most " "image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " "(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " "output of image printouts are: " "

    " "
  • Brightness
    • " "
  • Hue
    • " "
  • Saturation
    • " "
  • Gamma
" "

For a more detailed explanation about Brightness, Hue, Saturation and Gamma " "settings, please look at the 'WhatsThis' items provided for these controls. " "

" msgstr "" #: cups/kpimagepage.cpp:136 msgid "" " " "

Coloration Preview Thumbnail

" "

The coloration preview thumbnail indicates change of image coloration by " "different settings. Options to influence output are: " "

    " "
  • Brightness
    • " "
  • Hue (Tint)
    • " "
  • Saturation
    • " "
  • Gamma

" "

For a more detailed explanation about Brightness, Hue, Saturation and Gamma " "settings, please look at the 'WhatsThis' items provided for these controls. " "

" msgstr "" #: cups/kpimagepage.cpp:152 msgid "" " " "

Image Size: Dropdown menu to control the image size on the printed " "paper. Dropdown works in conjunction with slider below. Dropdown options " "are:.

" "
    " "
  • Natural Image Size: Image prints in its natural image size. If it " "does not fit onto one sheet, the printout will be spread across multiple " "sheets. Note, that the slider is disabled when selecting 'natural image size' " "in the dropdown menu.
    • " "
  • Resolution (ppi): The resolution value slider covers a number range " "from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch " "(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 pixels " "per inch, for example, but 5x4 inches at 600 pixels per inch. If the specified " "resolution makes the image larger than the page, multiple pages will be " "printed. Resolution defaults to 72 ppi.
    • " "
  • % of Page Size: The percent value slider covers numbers from 1 to " "800. It specifies the size in relation to the page (not the image). A scaling " "of 100 percent will fill the page as completely as the image aspect ratio " "allows (doing auto-rotation of the image as needed). A scaling of more than " "100 will print the image across multiple sheets. A scaling of 200 percent will " "print on up to 4 pages.
    • Scaling in % of page size defaults to 100 %. " "
  • % of Natural Image Size: The percent value slider moves from 1 to " "800. It specifies the printout size in relation to the natural image size. A " "scaling of 100 percent will print the image at its natural size, while a " "scaling of 50 percent will print the image at half its natural size. If the " "specified scaling makes the image larger than the page, multiple pages will be " "printed. Scaling in % of natural image size defaults to 100 %.
" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o natural-scaling=...     # range in  %  is 1....800  "
"
     -o scaling=...             # range in  %  is 1....800  "
"
     -o ppi=...                 # range in ppi is 1...1200

" "" msgstr "" #: cups/kpimagepage.cpp:192 msgid "" " " "

Position Preview Thumbnail

" "

This position preview thumbnail indicates the position of the image on the " "paper sheet. " "

Click on horizontal and vertical radio buttons to move image alignment on " "paper around. Options are: " "

    " "
  • center
    • " "
  • top
    • " "
  • top-left
    • " "
  • left
    • " "
  • bottom-left
    • " "
  • bottom
    • " "
  • bottom-right
    • " "
  • right
    • " "
  • top-right

" msgstr "" #: cups/kpimagepage.cpp:210 msgid "" " " "

Reset to Default Values

" "

Reset all coloration settings to default values. Default values are: " "

    " "
  • Brightness: 100
    • " "
  • Hue (Tint). 0
    • " "
  • Saturation: 100
    • " "
  • Gamma: 1000

" msgstr "" #: cups/kpimagepage.cpp:222 msgid "" " " "

Image Positioning:

" "

Select a pair of radiobuttons to move image to the position you want on the " "paper printout. Default is 'center'.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o position=...       # examples: \"top-left\" or \"bottom\"
" "

" msgstr "" #: cups/kpimagepage.cpp:237 msgid "Image" msgstr "Imådje" #: cups/kpimagepage.cpp:239 msgid "Color Settings" msgstr "Apontiaedjes del coleur" #: cups/kpimagepage.cpp:241 msgid "Image Size" msgstr "Grandeu d' l' imådje" #: cups/kpimagepage.cpp:243 msgid "Image Position" msgstr "Eplaeçmint d' l' imådje" #: cups/kpimagepage.cpp:247 msgid "&Brightness:" msgstr "&Rilujhance:" #: cups/kpimagepage.cpp:252 msgid "&Hue (Color rotation):" msgstr "&Tinte (tournaedje des coleurs)" #: cups/kpimagepage.cpp:257 msgid "&Saturation:" msgstr "&Saturaedje:" #: cups/kpimagepage.cpp:262 msgid "&Gamma (Color correction):" msgstr "&Gama (coridjaedje del coleur):" #: cups/kpimagepage.cpp:283 msgid "&Default Settings" msgstr "&Prémetous apontiaedjes" #: cups/kpimagepage.cpp:289 msgid "Natural Image Size" msgstr "Grandeu naturele di l' imådje" #: cups/kpimagepage.cpp:290 msgid "Resolution (ppi)" msgstr "Finté (ppi)" #: cups/kpimagepage.cpp:292 #, no-c-format msgid "% of Page" msgstr "% del pådje" #: cups/kpimagepage.cpp:294 #, no-c-format msgid "% of Natural Image Size" msgstr "% del grandeu naturele di l' imådje" #: cups/kpimagepage.cpp:304 msgid "&Image size type:" msgstr "Sôre del grandeu di l' &imådje:" #: cups/kmcupsjobmanager.cpp:277 msgid "Job Report" msgstr "Rapoirt sol bouye" #: cups/kmcupsjobmanager.cpp:279 cups/kmcupsjobmanager.cpp:384 msgid "Unable to retrieve job information: " msgstr "Dji n' sai rapexhî des infôrmåcions sol bouye: " #: cups/kmcupsjobmanager.cpp:288 msgid "&Job IPP Report" msgstr "&Rapoirt sol bezogne IPP" #: cups/kmcupsjobmanager.cpp:290 msgid "&Increase Priority" msgstr "Pus &grande prumiristé" #: cups/kmcupsjobmanager.cpp:292 msgid "&Decrease Priority" msgstr "Pus &basse prumiristé" #: cups/kmcupsjobmanager.cpp:294 msgid "&Edit Attributes..." msgstr "&Candjî les atributs..." #: cups/kmcupsjobmanager.cpp:347 msgid "Unable to change job priority: " msgstr "Dji n' sai candjî l' prumiristé del bouye: " #: cups/kmcupsjobmanager.cpp:405 #, c-format msgid "Unable to find printer %1." msgstr "Dji n' sai trover li scrirece %1." #: cups/kmcupsjobmanager.cpp:422 msgid "Attributes of Job %1@%2 (%3)" msgstr "Atributs del bouye %1@%2 (%3)" #: cups/kmcupsjobmanager.cpp:444 msgid "Unable to set job attributes: " msgstr "Nén moyén do defini les atributs del bouye: " #: rlpr/krlprprinterimpl.cpp:73 msgid "The printer is incompletely defined. Try to reinstall it." msgstr "Li scrirece n' est nén tt a fwait defineye. Sayîz del rastaler." #: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50 msgid "Remote LPD Queue Settings" msgstr "Apontiaedje del cawêye LPD å lon" #: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 msgid "Queue:" msgstr "Caweye:" #: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85 msgid "Empty host name." msgstr "No d' lodjoe vude." #: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87 msgid "Empty queue name." msgstr "No d' caweye vude." #: rlpr/kmwrlpr.cpp:124 msgid "Remote queue %1 on %2" msgstr "Cawêye då lon %1 so %2" #: rlpr/kmwrlpr.cpp:199 msgid "No Predefined Printers" msgstr "Pont di scrirece di prémetowes" #: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 msgid "Queue" msgstr "Caweye" #: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 msgid "Empty printer name." msgstr "No del sicrirece vude" #: rlpr/kmrlprmanager.cpp:63 msgid "Printer not found." msgstr "Sicrirece nén trovêye." #: rlpr/kmrlprmanager.cpp:75 msgid "Not implemented yet." msgstr "Nén co fwait" #: rlpr/kmconfigproxy.cpp:29 msgid "Proxy" msgstr "Procsi" #: rlpr/kmconfigproxy.cpp:30 msgid "RLPR Proxy Server Settings" msgstr "Apontiaedjes do sierveu procsi RLPR" #: rlpr/kmproxywidget.cpp:32 msgid "Proxy Settings" msgstr "Apontiaedje do procsi" #: rlpr/kmproxywidget.cpp:36 msgid "&Use proxy server" msgstr "Eployî on sierveu &procsi" #: kmjob.cpp:114 msgid "Queued" msgstr "Metou el caweye" #: kmjob.cpp:117 msgid "Held" msgstr "Ritnou" #: kmjob.cpp:123 msgid "Canceled" msgstr "Anulé" #: kmjob.cpp:126 msgid "Aborted" msgstr "Côpé" #: kmjob.cpp:129 msgid "Completed" msgstr "Tot fwait" #: tools/escputil/escpwidget.cpp:45 #, fuzzy msgid "EPSON InkJet Printer Utilities" msgstr "Tchuzes scrirece rantoele TCP/soket" #: tools/escputil/escpwidget.cpp:91 msgid "&Use direct connection (might need root permissions)" msgstr "" #: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 msgid "Printer:" msgstr "Sicrirece:" #: management/kminfopage.cpp:54 management/kminfopage.cpp:93 #: tools/escputil/escpwidget.cpp:101 msgid "Device:" msgstr "Éndjin:" #: tools/escputil/escpwidget.cpp:103 #, fuzzy msgid "Clea&n print head" msgstr "Sicrireces del classe:" #: tools/escputil/escpwidget.cpp:104 #, fuzzy msgid "&Print a nozzle test pattern" msgstr "Rexhe les pådjes di saye" #: tools/escputil/escpwidget.cpp:105 #, fuzzy msgid "&Align print head" msgstr "Imprimer l' tiestire" #: tools/escputil/escpwidget.cpp:106 #, fuzzy msgid "&Ink level" msgstr "Livea nén valide." #: tools/escputil/escpwidget.cpp:107 msgid "P&rinter identification" msgstr "Idintifiaedje del sic&rirece" #: tools/escputil/escpwidget.cpp:153 #, fuzzy msgid "Internal error: no device set." msgstr "Divintrinne aroke (sins messaedje)." #: tools/escputil/escpwidget.cpp:164 #, fuzzy, c-format msgid "Unsupported connection type: %1" msgstr "Accion nén sopoirtêye: %1" #: tools/escputil/escpwidget.cpp:171 msgid "" "An escputil process is still running. You must wait until its completion before " "continuing." msgstr "" #: tools/escputil/escpwidget.cpp:179 #, fuzzy msgid "" "The executable escputil cannot be found in your PATH environment variable. Make " "sure gimp-print is installed and that escputil is in your PATH." msgstr "" "Dji n' trove nén li programe %1 dins vosse tchimin (PATH). Waitîz si l' " "programe egzistêye po do bon et s' il est dvins vosse variåve PATH." #: tools/escputil/escpwidget.cpp:204 #, fuzzy msgid "Internal error: unable to start escputil process." msgstr "Divintrinne aroke: nén moyén do tcherdjî l' passete." #: tools/escputil/escpwidget.cpp:214 #, fuzzy msgid "Operation terminated with errors." msgstr "Fini avou ene aroke" #: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 msgid "Output" msgstr "Rexhowe" #: management/kmmainview.cpp:71 msgid "" "The printer %1 already exists. Continuing will overwrite existing printer. Do " "you want to continue?" msgstr "" "Li scrirece %1 egzistêye dedja. Si vos continouwez, li scrirece k' egzistêye " "dedja serè disfacêye. Voloz vs continouwer?" #: management/kmmainview.cpp:132 management/kmmainview.cpp:779 #: management/kmmainview.cpp:855 management/kmmainview.cpp:879 msgid "Initializing manager..." msgstr "Dj' enonde li manaedjeu..." #: management/kmmainview.cpp:179 msgid "&Icons,&List,&Tree" msgstr "Imådje&tes,Dji&vêye,&Coxhlaedje" #: management/kmmainview.cpp:183 msgid "Start/Stop Printer" msgstr "Enonder/arester li scrirece" #: management/kmmainview.cpp:185 msgid "&Start Printer" msgstr "&Enonder li scrirece" #: management/kmmainview.cpp:186 msgid "Sto&p Printer" msgstr "Djo&ker li scrirece" #: management/kmmainview.cpp:188 msgid "Enable/Disable Job Spooling" msgstr "Mete en alaedje/essocter li cawêye des bouyes" #: management/kmmainview.cpp:190 msgid "&Enable Job Spooling" msgstr "M&ete en alaedje li cawêye des bouyes" #: management/kmmainview.cpp:191 msgid "&Disable Job Spooling" msgstr "E&ssocter li cawêye des bouyes" #: management/kmmainview.cpp:194 msgid "&Configure..." msgstr "&Apontyî..." #: management/kmmainview.cpp:195 msgid "Add &Printer/Class..." msgstr "Radjouter ene &sicrirece ou ene classe..." #: management/kmmainview.cpp:196 msgid "Add &Special (pseudo) Printer..." msgstr "Radjouter ene (pseudo)scrirece si&peciåle..." #: management/kmmainview.cpp:197 msgid "Set as &Local Default" msgstr "Mete come prémetou &locålmint" #: management/kmmainview.cpp:198 msgid "Set as &User Default" msgstr "Defini come prémetou &uzeu" #: management/kmmainview.cpp:199 msgid "&Test Printer..." msgstr "&Sayî li scrirece..." #: management/kmmainview.cpp:200 msgid "Configure &Manager..." msgstr "Apontyî li &manaedjeu..." #: management/kmmainview.cpp:201 msgid "Initialize Manager/&View" msgstr "Enonder li manaedjeu/li &håynaedje" #: management/kmmainview.cpp:203 msgid "&Orientation" msgstr "&Ashidaedje" #: management/kmmainview.cpp:206 msgid "&Vertical,&Horizontal" msgstr "&Astampé,&Coûtchî" #: management/kmmainview.cpp:210 msgid "R&estart Server" msgstr "R&enonder li sierveu" #: management/kmmainview.cpp:211 msgid "Configure &Server..." msgstr "Apontyî li &sierveu..." #: management/kmmainview.cpp:214 #, fuzzy msgid "Hide &Toolbar" msgstr "_Catchî l' bår ås usteyes" #: management/kmmainview.cpp:216 msgid "Show Me&nu Toolbar" msgstr "Mostrer bår ås usteyes do me&nu" #: management/kmmainview.cpp:217 #, fuzzy msgid "Hide Me&nu Toolbar" msgstr "Mostrer bår ås usteyes do me&nu" #: management/kmmainview.cpp:219 msgid "Show Pr&inter Details" msgstr "Mostrer les &detays sol sicrirece" #: management/kmmainview.cpp:220 #, fuzzy msgid "Hide Pr&inter Details" msgstr "Mostrer les &detays sol sicrirece" #: management/kmmainview.cpp:224 msgid "Toggle Printer &Filtering" msgstr "Discandjî l' &passete d' imprimaedje" #: management/kmmainview.cpp:228 msgid "%1 &Handbook" msgstr "%1 E&splikêyes" #: management/kmmainview.cpp:229 msgid "%1 &Web Site" msgstr "%1 &Waibe" #: management/kmmainview.cpp:231 msgid "Pri&nter Tools" msgstr "&Usteyes po rexhe so li scrirece" #: management/kmmainview.cpp:296 msgid "Print Server" msgstr "Sierveu d' imprimaedje" #: management/kmmainview.cpp:302 msgid "Print Manager" msgstr "Manaedjeu d' imprimaedje" #: management/kmmainview.cpp:319 msgid "Documentation" msgstr "Documintåcion" #: management/kmmainview.cpp:340 msgid "An error occurred while retrieving the printer list." msgstr "I gn a åk ki n' a nén stî come dji rapexhive li djivêye des scrireces." #: management/kmmainview.cpp:514 #, c-format msgid "Unable to modify the state of printer %1." msgstr "Nén moyén do candjî l' estat del sicrirece %1." #: management/kmmainview.cpp:525 msgid "Do you really want to remove %1?" msgstr "Voloz po do bon oister %1?" #: management/kmmainview.cpp:529 #, c-format msgid "Unable to remove special printer %1." msgstr "Nén moyén do oister li scrirece sipeciåle %1." #: management/kmmainview.cpp:532 #, c-format msgid "Unable to remove printer %1." msgstr "Nén moyén do oister li scrirece %1." #: management/kmmainview.cpp:562 #, c-format msgid "Configure %1" msgstr "Apontyî %1" #: management/kmmainview.cpp:569 #, c-format msgid "Unable to modify settings of printer %1." msgstr "Nén moyén do candjî l' apontiaedje del sicrirece %1." #: management/kmmainview.cpp:573 #, c-format msgid "Unable to load a valid driver for printer %1." msgstr "Dji n' sai tcherdjî on mineu ki convént po li scrirece %1." #: management/kmmainview.cpp:585 msgid "Unable to create printer." msgstr "Dji n' sai ahiver li scrirece." #: management/kmmainview.cpp:597 msgid "Unable to define printer %1 as default." msgstr "Dji n' sai defini li scrirece %1 come prémetowe sicrirece." #: management/kminstancepage.cpp:265 management/kmmainview.cpp:632 msgid "You are about to print a test page on %1. Do you want to continue?" msgstr "Vos alez fé rexhe ene pådje di saye so %1. Voloz continouwer?" #: management/kminstancepage.cpp:265 management/kmmainview.cpp:632 msgid "Print Test Page" msgstr "Fé rexhe ene pådje di saye" #: management/kminstancepage.cpp:270 management/kmmainview.cpp:635 #, c-format msgid "Test page successfully sent to printer %1." msgstr "Pådje di saye bén evoyeye al sicrirece %1." #: management/kmmainview.cpp:637 #, c-format msgid "Unable to test printer %1." msgstr "Nén moyén do sayî li scrirece %1." #: management/kmmainview.cpp:650 msgid "Error message received from manager:

%1

" msgstr "Li manaedjeu a evoyî ci messaedje ci:

%1

" #: management/kmmainview.cpp:652 msgid "Internal error (no error message)." msgstr "Divintrinne aroke (sins messaedje)." #: management/kmmainview.cpp:670 msgid "Unable to restart print server." msgstr "Nén moyén do renonder l' sierveu d' imprimaedje." #: management/kmmainview.cpp:675 msgid "Restarting server..." msgstr "Renondaedje do sierveu..." #: management/kmmainview.cpp:685 msgid "Unable to configure print server." msgstr "Nén moyén d' apontyî li sierveu d' imprimaedje." #: management/kmmainview.cpp:690 msgid "Configuring server..." msgstr "Dj' aponteye li sierveu..." #: management/kmmainview.cpp:838 msgid "" "Unable to start printer tool. Possible reasons are: no printer selected, the " "selected printer doesn't have any local device defined (printer port), or the " "tool library could not be found." msgstr "" "Nén moyén d' enonder l' usteye po l' imprimaedje. Ça pout esse paski gn nole " "sicrirece di tchoezeye, paski l' sicrirece tchoezeye n' est nén raloyeye a èn " "éndjin ou paski l' livreye des usteyes n' a nén stî trovêye." #: management/kmmainview.cpp:862 msgid "Unable to retrieve the printer list." msgstr "Nén moyén di rtrover l' djivêye des scrireces." #: management/kmconfigcommand.cpp:33 msgid "Commands" msgstr "Kimandes" #: management/kmconfigcommand.cpp:34 msgid "Command Settings" msgstr "Apontiaedjes pol comande" #: management/kmconfigcommand.cpp:37 msgid "Edit/Create Commands" msgstr "Candjî/Ahiver des comandes" #: management/kmconfigcommand.cpp:39 msgid "" "

Command objects perform a conversion from input to output." "
They are used as the basis to build both print filters and special " "printers. They are described by a command string, a set of options, a set of " "requirements and associated mime types. Here you can create new command objects " "and edit existing ones. All changes will only be effective for you." msgstr "" #: management/kmwizard.cpp:64 management/kmwizard.cpp:209 msgid "&Next >" msgstr "&Shuvant >" #: management/kmwizard.cpp:66 msgid "< &Back" msgstr "< En &erî" #: management/kmwizard.cpp:131 management/kmwizard.cpp:166 #: management/kmwizard.cpp:191 msgid "Add Printer Wizard" msgstr "Macrea po radjouter des scrireces" #: management/kmwizard.cpp:166 msgid "Modify Printer" msgstr "Candjî li scrirece" #: management/kmwizard.cpp:191 msgid "Unable to find the requested page." msgstr "Nén moyén do trover l' pådje ki vos dmandez" #: management/kmwizard.cpp:207 management/kmwizard.cpp:234 msgid "&Finish" msgstr "&Fini" #: management/tdeprint_management_module.cpp:48 msgid "Select Command" msgstr "Tchoezi ene comande" #: management/kmwlocal.cpp:38 msgid "Local Port Selection" msgstr "Tchoezixhaedje do pôrt locå" #: management/kmwlocal.cpp:50 msgid "Local System" msgstr "Sistinme locå" #: management/kmwlocal.cpp:57 msgid "Parallel" msgstr "Paralele" #: management/kmwlocal.cpp:58 msgid "Serial" msgstr "Séreye" #: management/kmwlocal.cpp:59 msgid "USB" msgstr "USB" #: driver.cpp:389 management/kmwlocal.cpp:60 msgid "Others" msgstr "Ôtes" #: management/kmwlocal.cpp:63 msgid "" "

Select a valid detected port, or enter directly the corresponding URI in the " "bottom edit field.

" msgstr "" #: management/kmwlocal.cpp:78 msgid "" "_: The URI is empty\n" "Empty URI." msgstr "" #: management/kmwlocal.cpp:83 msgid "The local URI doesn't correspond to a detected port. Continue?" msgstr "" #: management/kmwlocal.cpp:85 msgid "Select a valid port." msgstr "Tchoezixhoz on pôrt valide." #: management/kmwlocal.cpp:166 #, fuzzy msgid "Unable to detect local ports." msgstr "Dji n' sai tchoezi li båze di dnêyes." #: management/kmpropbackend.cpp:34 msgid "Printer type:" msgstr "Sôre di scrirece:" #: management/kmpropbackend.cpp:48 msgid "Interface" msgstr "Eterface" #: management/kmpropbackend.cpp:49 msgid "Interface Settings" msgstr "Apontiaedje di l' eterface" #: management/kmpropbackend.cpp:62 msgid "IPP Printer" msgstr "Sicrirece IPP" #: management/kmpropbackend.cpp:63 msgid "Local USB Printer" msgstr "Sicrirece locåle USB" #: management/kmpropbackend.cpp:64 msgid "Local Parallel Printer" msgstr "Sicrirece locåle paralele" #: management/kmpropbackend.cpp:65 msgid "Local Serial Printer" msgstr "Sicrirece locåle séreye" #: management/kmpropbackend.cpp:66 msgid "Network Printer (socket)" msgstr "Sicrirece sol rantoele (soket)" #: management/kmpropbackend.cpp:67 msgid "SMB printers (Windows)" msgstr "Sicrireces SMB (Windows)" #: management/kmpropbackend.cpp:69 msgid "File printer" msgstr "Imprimerdins on fitchî" #: management/kmpropbackend.cpp:70 msgid "Serial Fax/Modem printer" msgstr "Sicrirece séreye facs/modem" #: management/kmpropbackend.cpp:71 #, fuzzy msgid "" "_: Unknown Protocol\n" "Unknown" msgstr "Nén cnoxhou / Nén cnoxhou" #: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38 #, fuzzy msgid "" "_: Physical Location\n" "Location:" msgstr "E" #: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39 #: management/kmwname.cpp:41 msgid "Description:" msgstr "Discrijhaedje:" #: management/kminfopage.cpp:56 msgid "Model:" msgstr "Modele:" #: management/kminfopage.cpp:92 msgid "Members:" msgstr "Mimbes:" #: management/kminfopage.cpp:112 msgid "Implicit class" msgstr "Classe implicite" #: management/kminfopage.cpp:114 msgid "Remote class" msgstr "Classe å lon" #: management/kminfopage.cpp:115 msgid "Local class" msgstr "Classe locåle" #: management/kminfopage.cpp:117 msgid "Remote printer" msgstr "Sicrirece å lon" #: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274 #: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342 #: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118 msgid "Local printer" msgstr "Sicrirece locåle" #: management/kminfopage.cpp:120 msgid "Special (pseudo) printer" msgstr "(Pseudo) scrirece sipeciåle" #: management/kminfopage.cpp:121 #, fuzzy msgid "" "_: Unknown class of printer\n" "Unknown" msgstr "Nén cnoxhou" #: management/kmwclass.cpp:37 msgid "Class Composition" msgstr "Ådvins del classe" #: management/kmwclass.cpp:52 msgid "Available printers:" msgstr "Sicrireces ki polèt esse eployeyes:" #: management/kmwclass.cpp:53 msgid "Class printers:" msgstr "Sicrireces del classe:" #: management/kmwclass.cpp:79 msgid "You must select at least one printer." msgstr "Vos dvoz tchoezi pol moens ene sicrirece." #: management/kmpropgeneral.cpp:37 msgid "Printer name:" msgstr "No del sicrirece:" #: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55 msgid "General Settings" msgstr "Djenerålès Tchuzes" #: management/networkscanner.cpp:104 management/networkscanner.cpp:184 msgid "Sc&an" msgstr "Cor&waitî" #: management/networkscanner.cpp:111 msgid "Network scan:" msgstr "Corwaitaedje del rantoele:" #: management/networkscanner.cpp:112 management/networkscanner.cpp:299 #: management/networkscanner.cpp:310 #, c-format msgid "Subnet: %1" msgstr "Sorrantoele: %1" #: management/networkscanner.cpp:161 msgid "" "You are about to scan a subnet (%1.*) that does not correspond to the current " "subnet of this computer (%2.*). Do you want to scan the specified subnet " "anyway?" msgstr "" #: management/networkscanner.cpp:164 msgid "&Scan" msgstr "Cor&waitî" #: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338 msgid "&Subnetwork:" msgstr "S&orrantoele" #: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340 msgid "&Timeout (ms):" msgstr "&Ratindaedje (e ms):" #: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378 msgid "Scan Configuration" msgstr "Apontiaedje do corwaitaedje" #: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110 #: management/networkscanner.cpp:390 management/networkscanner.cpp:396 msgid "Wrong subnetwork specification." msgstr "Li discrijhaedje del sorrantoele n' est nén djusse." #: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404 msgid "Wrong timeout specification." msgstr "Li tins d' ratindaedje n' est nén djusse." #: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407 msgid "Wrong port specification." msgstr "Li pôrt n' est nén djusse." #: management/kmdriverdialog.cpp:48 msgid "" "Some options are in conflict. You must resolve those conflicts before " "continuing." msgstr "" "I gn a des tchuzes ki s' contribatèt. Vos dvoz arindjî çoula divant do tcheryî " "pus lon. " #: management/kmwfile.cpp:35 msgid "File Selection" msgstr "Tchoezi l' fitchî" #: management/kmwfile.cpp:41 msgid "" "

The printing will be redirected to a file. Enter here the path of the file " "you want to use for redirection. Use an absolute path or the browse button for " "graphical selection.

" msgstr "" "

L' imprimaedje si frè dins on fitchî. Tapez vaici li tchmin do fitchî k' vos " "voloz rexhe divins. Eployî on tchmin absolou ou don bén clitchîz solboton po " "betchter eyet tchoezi vosse fitchî.

" #: management/kmwfile.cpp:44 msgid "Print to file:" msgstr "Imprimer dins on fitchî:" #: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 msgid "Empty file name." msgstr "Li no d' fitchî est vude." #: management/kmwfile.cpp:66 msgid "Directory does not exist." msgstr "Li ridant n' egzistêye nén." #: management/kmconfigpreview.cpp:35 msgid "Preview" msgstr "Prévey" #: management/kmconfigpreview.cpp:36 msgid "Preview Settings" msgstr "Apontiaedjes po vey divant" #: management/kmconfigpreview.cpp:39 msgid "Preview Program" msgstr "Programe po vey divant" #: management/kmconfigpreview.cpp:41 msgid "&Use external preview program" msgstr "&Eployî on dfoûtrin programe po vey divant" #: management/kmconfigpreview.cpp:44 msgid "" "You can use an external preview program (PS viewer) instead of the TDE built-in " "preview system. Note that if the TDE default PS viewer (KGhostView) cannot be " "found, TDE tries automatically to find another external PostScript viewer" msgstr "" #: management/kmwdrivertest.cpp:41 msgid "Printer Test" msgstr "Såye del sicrirece" #: management/kmwdrivertest.cpp:51 msgid "Manufacturer:" msgstr "Fabricant:" #: management/kmwdrivertest.cpp:52 msgid "Model:" msgstr "Modele:" #: management/kmwdrivertest.cpp:53 msgid "Description:" msgstr "Discrijhaedje:" #: management/kmwdrivertest.cpp:55 msgid "&Test" msgstr "&Sayî" #: management/kmwdrivertest.cpp:59 msgid "" "

Now you can test the printer before finishing installation. Use the " "Settings button to configure the printer driver and the Test " "button to test your configuration. Use the Back " "button to change the driver (your current configuration will be discarded).

" msgstr "" "

Asteure, vos poloz sayî li scrirece divant d' achever l' astalaedje. " "Clitchîz sol boton Apontiaedje po-z apontyî l' mineu del sicrirece. " "Adon, clitchîz sol boton Sayî po sayî voste apontiaedje. Clitchîz sol " "boton En erî po candjî l' mineu (voste apontiaedje do moumint serè " "disfacé).

" #: management/kmwdrivertest.cpp:117 msgid "Unable to load the requested driver:

%1

" msgstr "Nén moyén do tcherdjî l' mineu ki vs avoz dmandé:

%1

" #: management/kmwdrivertest.cpp:146 msgid "" "Test page successfully sent to printer. Wait until printing is complete, then " "click the OK button." msgstr "" "Li pådje di saye a stî evoyeye al sicrirece et tot a fwait a stî comifåt. " "Atårdjîz disk' a tant ki tot a fwait est rexhou. Adon, clitchîz sol boton " "'l est bon." #: management/kmwdrivertest.cpp:148 msgid "Unable to test printer: " msgstr "Nén moyén do sayî li scrirece:" #: management/kmwdrivertest.cpp:150 msgid "Unable to remove temporary printer." msgstr "Nén moyén do oister li scrirece timporaire." #: management/kmwdrivertest.cpp:153 msgid "Unable to create temporary printer." msgstr "Nén moyén d' ahiver li scrirece timporaire." #: management/kmpropwidget.cpp:50 msgid "" "Unable to change printer properties. Error received from manager:" "

%1

" msgstr "" "Nén moyén do candjî les prôpietés del sicrirece. Li manaedjeu a evoyî ci " "messaedje ci:" "

%1

" #: management/kaddprinterwizard.cpp:10 msgid "Configure TDE Print" msgstr "Apontyî l' imprimaedje di TDE" #: management/kaddprinterwizard.cpp:11 msgid "Configure print server" msgstr "Apontyî li sierveu d' imprimaedje" #: management/kaddprinterwizard.cpp:18 msgid "Start the add printer wizard" msgstr "Enonder li macrea po radjouter ene sicrirece" #: management/kmdbcreator.cpp:92 msgid "" "No executable defined for the creation of the driver database. This operation " "is not implemented." msgstr "" "I gn a pont d' programe di defini po fé li båze di dnêyes des mineus. Ciste " "operåcion la n' est nén co presse a-z esse eployeye." #: management/kmdbcreator.cpp:95 msgid "" "The executable %1 could not be found in your PATH. Check that this program " "exists and is accessible in your PATH variable." msgstr "" "Dji n' trove nén li programe %1 dins vosse tchimin (PATH). Waitîz si l' " "programe egzistêye po do bon et s' il est dvins vosse variåve PATH." #: management/kmdbcreator.cpp:99 msgid "" "Unable to start the creation of the driver database. The execution of %1 " "failed." msgstr "" "Nén moyén do fé li båze di dnêyes des mineus. Nén moyén d' enonder «%1»." #: management/kmdbcreator.cpp:113 msgid "Please wait while TDE rebuilds a driver database." msgstr "Atårdjîz sol tins ki TDE rbastixh ene båze di dnêyes des mineus." #: management/kmdbcreator.cpp:114 msgid "Driver Database" msgstr "Båze di dnêyes des mineus." #: management/kmdbcreator.cpp:171 msgid "" "Error while creating driver database: abnormal child-process termination." msgstr "" "Åk n' a nén stî come dji fjheu l' båze di dnêyes des mineus. Li processus a " "fwait berwete d' ene façon ki n' est nén normåle." #: management/kmwpassword.cpp:37 msgid "User Identification" msgstr "Idintifiaedje di l' uzeu" #: management/kmwpassword.cpp:43 msgid "" "

This backend may require a login/password to work properly. Select the type " "of access to use and fill in the login and password entries if needed.

" msgstr "" "

Ci fondmint la årè téle feye dandjî d' on no d' uzeu (login) eyet d' on " "scret po roter comifåt. Rimplixhoz les intrêyes ki vs seront dmandêyes ou metoz " "en alaedje on Conte priyî po-z intrer come anonime (sins no)." #: management/kmwpassword.cpp:49 msgid "&Login:" msgstr "&Elodjaedje:" #: management/kmwpassword.cpp:53 msgid "&Anonymous (no login/password)" msgstr "Conte &anonime (sins no/sins scret)" #: management/kmwpassword.cpp:54 msgid "&Guest account (login=\"guest\")" msgstr "Conte viziteu (no d' elodjaedje=«guest»)" #: management/kmwpassword.cpp:55 msgid "Nor&mal account" msgstr "Conte &normå" #: management/kmwpassword.cpp:88 msgid "Select one option" msgstr "Tchoezixhoz ene tchuze" #: management/kmwpassword.cpp:90 msgid "User name is empty." msgstr "Li no d' uzeu est vude." #: management/kmwsocket.cpp:38 msgid "Network Printer Information" msgstr "Infôrmåcions so li scrirece sol rantoele" #: management/kmwsocket.cpp:48 msgid "&Printer address:" msgstr "Adresse del &sicrirece:" #: management/kmwsocket.cpp:49 msgid "P&ort:" msgstr "&Pôrt:" #: management/kmwsocket.cpp:98 msgid "You must enter a printer address." msgstr "Vos dvoz dner ene adresse di scrirece." #: management/kmwsocket.cpp:109 msgid "Wrong port number." msgstr "Li limero do pôrt n' est nén djusse." #: management/kmpropcontainer.cpp:35 msgid "Change..." msgstr "Candjî..." #: management/kmconfigdialog.cpp:38 msgid "TDE Print Configuration" msgstr "Apontiaedje des scrireces di TDE" #: management/kmwdriver.cpp:33 msgid "Printer Model Selection" msgstr "Tchoezi li modele del sicrirece" #: management/kmwdriver.cpp:80 management/kmwend.cpp:106 #: management/kmwname.cpp:83 msgid "Raw printer" msgstr "Brute sicrirece " #: management/kmwdriver.cpp:113 msgid "Internal error: unable to locate the driver." msgstr "Divintrinne aroke: nén moyén do trover l' mineu." #: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158 msgid "No Printer" msgstr "Nole sicrirece" #: management/kmjobviewer.cpp:138 management/kmjobviewer.cpp:177 #: management/kmjobviewer.cpp:194 management/kmjobviewer.cpp:210 #: management/kmjobviewer.cpp:356 management/kmjobviewer.cpp:543 msgid "All Printers" msgstr "Totes les scrireces" #: management/kmjobviewer.cpp:151 #, c-format msgid "Print Jobs for %1" msgstr "Bouyes d' imprimaedje po %1" #: management/kmjobviewer.cpp:170 management/kmjobviewer.cpp:172 #: management/kmjobviewer.cpp:336 #, c-format msgid "Max.: %1" msgstr "Macs.: %1" #: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:170 #: management/kmjobviewer.cpp:336 msgid "Unlimited" msgstr "Sins limite" #: management/kmjobviewer.cpp:235 msgid "Job ID" msgstr "ID del bouye" #: management/kmjobviewer.cpp:236 msgid "Owner" msgstr "Da" #: management/kmjobviewer.cpp:238 msgid "" "_: Status\n" "State" msgstr "Estat" #: management/kmjobviewer.cpp:239 msgid "Size (KB)" msgstr "Grandeu (Ko)" #: management/kmjobviewer.cpp:240 msgid "Page(s)" msgstr "Pådje(s)" #: management/kmjobviewer.cpp:262 msgid "&Hold" msgstr "&Ritnou" #: management/kmjobviewer.cpp:263 msgid "&Resume" msgstr "&Rataker" #: management/kmjobviewer.cpp:264 msgid "Remo&ve" msgstr "&Oister" #: management/kmjobviewer.cpp:265 msgid "Res&tart" msgstr "Rata&ker" #: management/kmjobviewer.cpp:266 msgid "&Move to Printer" msgstr "&Bodjî viè li scrirece" #: management/kmjobviewer.cpp:272 msgid "&Toggle Completed Jobs" msgstr "&Discandjî les bouyes achevêyes" #: management/kmjobviewer.cpp:275 msgid "Show Only User Jobs" msgstr "Ni mostrer ki les bouyes di l' uzeu" #: management/kmjobviewer.cpp:276 #, fuzzy msgid "Hide Only User Jobs" msgstr "Ni mostrer ki les bouyes di l' uzeu" #: management/kmjobviewer.cpp:284 msgid "User Name" msgstr "No di l' uzeu" #: management/kmjobviewer.cpp:301 msgid "&Select Printer" msgstr "&Tchoezi li scrirece" #: management/kmjobviewer.cpp:330 msgid "Refresh" msgstr "Rafrister" #: management/kmjobviewer.cpp:334 msgid "Keep window permanent" msgstr "Leyî l' purnea å lådje" #: management/kmjobviewer.cpp:479 msgid "" "Unable to perform action \"%1\" on selected jobs. Error received from manager:" msgstr "" "Nén moyén do fé l' accion \"%1\" sol bouye tchoezeye. Li manaedjeu a evoyî ci " "messaedje ci:" #: management/kmjobviewer.cpp:491 msgid "Hold" msgstr "Djoker" #: management/kmjobviewer.cpp:496 msgid "Resume" msgstr "Rataker" #: management/kmjobviewer.cpp:506 msgid "Restart" msgstr "Rataker" #: management/kmjobviewer.cpp:514 #, c-format msgid "Move to %1" msgstr "Bodjî viè %1" #: management/kmjobviewer.cpp:674 msgid "Operation failed." msgstr "L' operåcion a fwait berwete" #: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699 msgid "Print Job Settings" msgstr "Apontiaedjes po les bouyes d' imprimaedje" #: management/kmconfiggeneral.cpp:48 msgid "Refresh Interval" msgstr "Tins inte les rafristaedjes" #: management/kmconfiggeneral.cpp:51 msgid " sec" msgstr " seg" #: management/kmconfiggeneral.cpp:53 msgid "" "This time setting controls the refresh rate of various TDE Print " "components like the print manager and the job viewer." msgstr "" "Les tins inte les rafristaedjes sont-st eployîs pa les usteyes di " "TDE Print (metans: li manaedjeu d' imprimaedje eyet l' afitcheu des bouyes " "d' imprimaedje)." #: management/kmconfiggeneral.cpp:57 msgid "Test Page" msgstr "Pådje di saye" #: management/kmconfiggeneral.cpp:58 msgid "&Specify personal test page" msgstr "Eployî ene pådje di saye da &vosse" #: management/kmconfiggeneral.cpp:60 msgid "Preview..." msgstr "Prévey..." #: management/kmconfiggeneral.cpp:70 msgid "Sho&w printing status message box" msgstr "&Mostrer on purnea avou l' estat d' l' imprimaedje" #: management/kmconfiggeneral.cpp:71 msgid "De&faults to the last printer used in the application" msgstr "&Riprinde otomaticmint l' dierinne sicrirece eployeye pa l' aplicåcion" #: management/kmconfiggeneral.cpp:127 msgid "" "The selected test page is not a PostScript file. You may not be able to test " "your printer anymore." msgstr "" "Li pådje di saye ki vs avoz tchoezi n' est nén on fitchî PostScript. Ça s' " "pôreut k' vos n' sårîz pus sayî vosse sicrirece." #: management/smbview.cpp:44 msgid "Comment" msgstr "Rawete" #: management/kmwend.cpp:33 msgid "Confirmation" msgstr "Racertinaedje" #: tdefilelist.cpp:102 management/kmwend.cpp:50 management/kmwend.cpp:106 #: management/kmwend.cpp:109 msgid "Type" msgstr "Sôre" #: management/kmwend.cpp:52 msgid "Location" msgstr "Eplaeceçmint" #: management/kmwend.cpp:53 management/kmwend.cpp:112 #: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 msgid "Description" msgstr "Discrijhaedje" #: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 msgid "Members" msgstr "Mimbes" #: management/kmwend.cpp:69 msgid "Backend" msgstr "Programe fondmint" #: management/kmwend.cpp:74 msgid "Device" msgstr "Éndjin" #: management/kmwend.cpp:77 msgid "Printer IP" msgstr "IP del sicrirece" #: management/kmwend.cpp:78 management/kmwend.cpp:89 msgid "Port" msgstr "Pôrt" #: management/kmwend.cpp:81 management/kmwend.cpp:88 msgid "Host" msgstr "Lodjoe" #: management/kmwend.cpp:91 msgid "Account" msgstr "Conte" #: management/kmwend.cpp:96 msgid "URI" msgstr "URI" #: management/kmwend.cpp:109 msgid "DB driver" msgstr "Båze di dnêyes des scrireces" #: management/kmwend.cpp:109 msgid "External driver" msgstr "Difoûtrin mineu" #: management/kmwend.cpp:110 msgid "Manufacturer" msgstr "Fabricant" #: management/kmwend.cpp:111 msgid "Model" msgstr "Modele" #: management/kmconfigfonts.cpp:43 msgid "Font Settings" msgstr "Apontiaedjes po les fontes" #: management/kmconfigfonts.cpp:46 #, fuzzy msgid "Fonts Embedding" msgstr "Sititchaedje e scriftôr" #: management/kmconfigfonts.cpp:47 msgid "Fonts Path" msgstr "Tchimin po les fontes" #: management/kmconfigfonts.cpp:49 msgid "&Embed fonts in PostScript data when printing" msgstr "" #: management/kmconfigfonts.cpp:57 msgid "&Up" msgstr "&Monter" #: management/kmconfigfonts.cpp:58 msgid "&Down" msgstr "&Dischinde" #: management/kmconfigfonts.cpp:59 msgid "&Add" msgstr "R&adjouter" #: management/kmconfigfonts.cpp:61 #, fuzzy msgid "Additional director&y:" msgstr "Ridant di cmince:" #: management/kmconfigfonts.cpp:85 msgid "" "These options will automatically put fonts in the PostScript file which are not " "present on the printer. Font embedding usually produces better print results " "(closer to what you see on the screen), but larger print data as well." msgstr "" #: management/kmconfigfonts.cpp:89 msgid "" "When using font embedding you can select additional directories where TDE " "should search for embeddable font files. By default, the X server font path is " "used, so adding those directories is not needed. The default search path should " "be sufficient in most cases." msgstr "" #: management/kmwsmb.cpp:35 msgid "SMB Printer Settings" msgstr "Tchuzes po li scrirece SMB" #: management/kmwsmb.cpp:41 msgid "Scan" msgstr "Corwaitî" #: management/kmwsmb.cpp:42 msgid "Abort" msgstr "Côper" #: management/kmwsmb.cpp:44 msgid "Workgroup:" msgstr "Hopea d' ovraedje:" #: management/kmwsmb.cpp:45 msgid "Server:" msgstr "Sierveu:" #: management/kmwsmb.cpp:99 #, c-format msgid "Login: %1" msgstr "Elodjaedje: %1" #: management/kmwsmb.cpp:99 msgid "" msgstr "" #: management/kmpropmembers.cpp:40 msgid "Class Members" msgstr "Mimbes del classe" #: management/kxmlcommanddlg.cpp:108 msgid "Integer" msgstr "Etir" #: management/kxmlcommanddlg.cpp:109 msgid "Float" msgstr "Flotant" #: management/kxmlcommanddlg.cpp:110 msgid "List" msgstr "Djivêye" #: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 #: management/kxmlcommanddlg.cpp:866 msgid "&Description:" msgstr "&Discrijhaedje:" #: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 msgid "&Format:" msgstr "Co&gne:" #: management/kxmlcommanddlg.cpp:118 msgid "Default &value:" msgstr "Prémetowe &valixhance:" #: management/kxmlcommanddlg.cpp:119 msgid "Co&mmand:" msgstr "Ki&mande:" #: management/kxmlcommanddlg.cpp:126 #, fuzzy msgid "&Persistent option" msgstr "Djivêye des tchuzes po l' imprimaedje" #: management/kxmlcommanddlg.cpp:128 msgid "Va&lues" msgstr "Va&lixhances" #: management/kxmlcommanddlg.cpp:136 msgid "Minimum v&alue:" msgstr "Valixhance m&inimom:" #: management/kxmlcommanddlg.cpp:137 msgid "Ma&ximum value:" msgstr "Valixhance m&acsimom:" #: management/kxmlcommanddlg.cpp:150 msgid "Add value" msgstr "Radjouter valixhance" #: management/kxmlcommanddlg.cpp:151 msgid "Delete value" msgstr "Disfacer valixhance" #: management/kxmlcommanddlg.cpp:153 msgid "Apply changes" msgstr "Mete les candjmints en alaedje" #: management/kxmlcommanddlg.cpp:154 msgid "Add group" msgstr "Radjouter groupe" #: management/kxmlcommanddlg.cpp:155 msgid "Add option" msgstr "Radjouter tchuze" #: management/kxmlcommanddlg.cpp:156 msgid "Delete item" msgstr "Disfacer cayet" #: tdefilelist.cpp:135 management/kxmlcommanddlg.cpp:157 msgid "Move up" msgstr "Monter" #: tdefilelist.cpp:142 management/kxmlcommanddlg.cpp:158 msgid "Move down" msgstr "Dischinde" #: management/kxmlcommanddlg.cpp:162 msgid "&Input From" msgstr "&Intrêye di" #: management/kxmlcommanddlg.cpp:163 msgid "O&utput To" msgstr "Re&xhowe so" #: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 msgid "File:" msgstr "Fitchî:" #: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 msgid "Pipe:" msgstr "Buze:" #: management/kxmlcommanddlg.cpp:285 msgid "" "An identification string. Use only alphanumeric characters except spaces. The " "string __root__ is reserved for internal use." msgstr "" #: management/kxmlcommanddlg.cpp:289 msgid "" "A description string. This string is shown in the interface, and should be " "explicit enough about the role of the corresponding option." msgstr "" #: management/kxmlcommanddlg.cpp:293 msgid "" "The type of the option. This determines how the option is presented graphically " "to the user." msgstr "" #: management/kxmlcommanddlg.cpp:297 msgid "" "The format of the option. This determines how the option is formatted for " "inclusion in the global command line. The tag %value " "can be used to represent the user selection. This tag will be replaced at " "run-time by a string representation of the option value." msgstr "" #: management/kxmlcommanddlg.cpp:303 msgid "" "The default value of the option. For non persistent options, nothing is added " "to the command line if the option has that default value. If this value does " "not correspond to the actual default value of the underlying utility, make the " "option persistent to avoid unwanted effects." msgstr "" #: management/kxmlcommanddlg.cpp:309 msgid "" "Make the option persistent. A persistent option is always written to the " "command line, whatever its value. This is useful when the chosen default value " "does not match with the actual default value of the underlying utility." msgstr "" #: management/kxmlcommanddlg.cpp:313 #, c-format msgid "" "The full command line to execute the associated underlying utility. This " "command line is based on a mechanism of tags that are replaced at run-time. The " "supported tags are:" "

    " "
  • %filterargs: command options
    • " "
  • %filterinput: input specification
    • " "
  • %filteroutput: output specification
    • " "
  • %psu: the page size in upper case
    • " "
  • %psl: the page size in lower case
" msgstr "" #: management/kxmlcommanddlg.cpp:323 #, c-format msgid "" "Input specification when the underlying utility reads input data from a file. " "Use the tag %in to represent the input filename." msgstr "" #: management/kxmlcommanddlg.cpp:327 #, c-format msgid "" "Output specification when the underlying utility writes output data to a file. " "Use the tag %out to represent the output filename." msgstr "" #: management/kxmlcommanddlg.cpp:331 msgid "" "Input specification when the underlying utility reads input data from its " "standard input." msgstr "" #: management/kxmlcommanddlg.cpp:335 msgid "" "Output specification when the underlying utility writes output data to its " "standard output." msgstr "" #: management/kxmlcommanddlg.cpp:339 msgid "" "A comment about the underlying utility, which can be viewed by the user from " "the interface. This comment string supports basic HTML tags like <a>, " "<b> or <i>." msgstr "" #: management/kxmlcommanddlg.cpp:568 msgid "" "Invalid identification name. Empty strings and \"__root__\" are not allowed." msgstr "" #: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 msgid "New Group" msgstr "Novea groupe" #: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 msgid "New Option" msgstr "Novele tchuze" #: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 #, fuzzy, c-format msgid "Command Edit for %1" msgstr " Istwere des cmandes " #: management/kxmlcommanddlg.cpp:833 msgid "&Mime Type Settings" msgstr "Apontiaedjes pol sôre &MIME" #: management/kxmlcommanddlg.cpp:839 msgid "Supported &Input Formats" msgstr "Cognes sopoirtêyes en &intrêye" #: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 msgid "Requirements" msgstr "Çou k' i gn a dandjî" #: management/kxmlcommanddlg.cpp:851 msgid "&Edit Command..." msgstr "&Candjî l' comande..." #: management/kxmlcommanddlg.cpp:868 msgid "Output &format:" msgstr "Cogne del re&xhowe:" #: management/kxmlcommanddlg.cpp:870 msgid "ID name:" msgstr "No d' l' ID:" #: management/kxmlcommanddlg.cpp:1033 msgid "exec:/" msgstr "exec:/" #: management/kmwlpd.cpp:41 msgid "LPD Queue Information" msgstr "Infôrmåcion sol cawêye LPD" #: management/kmwlpd.cpp:44 msgid "" "

Enter the information concerning the remote LPD queue; this wizard will " "check it before continuing.

" msgstr "" "

Tapez les infôrmåcions sol cawêye LPD å lon. Ci programe nûton ci les " "verifeyrè divant do tcheryî pus lon.

" #: management/kmwlpd.cpp:54 msgid "Some information is missing." msgstr "I gn a des infôrmåcions ki mankèt." #: management/kmwlpd.cpp:61 msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" msgstr "" "Nén moyén do trover l' cawêye %1 sol sierveu %2. Voloz vs tcheryî pus lon tot " "l' minme?" #: management/kmconfigfilter.cpp:40 msgid "Filter" msgstr "Passete" #: management/kmconfigfilter.cpp:41 msgid "Printer Filtering Settings" msgstr "Apontiaedjes del passete des scrireces" #: management/kmconfigfilter.cpp:44 msgid "Printer Filter" msgstr "Passete des sicrireces" #: management/kmconfigfilter.cpp:56 msgid "" "The printer filtering allows you to view only a specific set of printers " "instead of all of them. This may be useful when there are a lot of printers " "available but you only use a few ones. Select the printers you want to see from " "the list on the left or enter a Location filter (ex: Group_1*). Both are " "cumulative and ignored if empty." msgstr "" #: management/kmconfigfilter.cpp:62 msgid "Location filter:" msgstr "Passete des eplaeçmints:" #: management/kmwdriverselect.cpp:37 msgid "Driver Selection" msgstr "Tchoezi l' mineu" #: management/kmwdriverselect.cpp:43 msgid "" "

Several drivers have been detected for this model. Select the driver you " "want to use. You will have the opportunity to test it as well as to change it " "if necessary.

" msgstr "" "

I gn a sacwants mineus po ç' modele la. Tchoezixhoz l' mineu ki vos voloz " "eployî. Vos åroz l' ocåzion del sayî, et co del candjî s' i fåt.

" #: management/kmwdriverselect.cpp:46 msgid "Driver Information" msgstr "Infôrmåcion sol mineu" #: management/kmwdriverselect.cpp:62 msgid "You must select a driver." msgstr "Vos dvoz tchoezi on mineu." #: management/kmwdriverselect.cpp:82 msgid " [recommended]" msgstr " [ricmandé]" #: management/kmwdriverselect.cpp:113 msgid "No information about the selected driver." msgstr "I gn a nole infôrmåcion sol mineu ki vs avoz tchoezi." #: management/kmwinfopage.cpp:32 msgid "Introduction" msgstr "Adrovaedje" #: management/kmwinfopage.cpp:37 msgid "" "

Welcome,

" "
" "

This wizard will help to install a new printer on your computer. It will " "guide you through the various steps of the process of installing and " "configuring a printer for your printing system. At each step, you can always go " "back using the Back button.

" "
" "

We hope you'll enjoy this tool!

" "

The TDE printing team.

" msgstr "" "

Bondjoû,

" "
" "

Ci «programe nûton» ci vos aidrè a astaler ene novele sicrirece so voste " "éndjole. I vs moennrè tot å lon del voye po-z astaler eyet apontyî ene " "sicrirece po vosse sistinme d' imprimaedje. A tot moumint, vos poloz, vos poloz " "rivni èn erî tot clitchant sol boton Erî.

" "
" "

Nos esperans k' vos åroz bon d' eployî ciste usteye ci!

" "

The TDE printing team.

" #: management/kmdriverdbwidget.cpp:51 msgid "&PostScript printer" msgstr "Sicrirece &Postscript" #: management/kmdriverdbwidget.cpp:52 msgid "&Raw printer (no driver needed)" msgstr "&Imprimaedje brut (nén dandjî d' on mineu)" #: management/kmdriverdbwidget.cpp:55 msgid "&Other..." msgstr "&Ôte..." #: management/kmdriverdbwidget.cpp:56 msgid "&Manufacturer:" msgstr "&Fabricant:" #: management/kmdriverdbwidget.cpp:57 msgid "Mo&del:" msgstr "Mo&dele:" #: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 msgid "Loading..." msgstr "Dji tchedje..." #: management/kmdriverdbwidget.cpp:217 msgid "Unable to find the PostScript driver." msgstr "Nén moyén do trover li mineu PostScript." #: management/kmdriverdbwidget.cpp:230 msgid "Select Driver" msgstr "Tchoezixhoz li mineu" #: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 msgid "" msgstr "" #: management/kmdriverdbwidget.cpp:252 msgid "Database" msgstr "Båze di dnêyes" #: management/kmdriverdbwidget.cpp:259 msgid "Wrong driver format." msgstr "Li cogne do mineu n' est nén valåbe." #: management/kmdriverdbwidget.cpp:268 msgid "Other" msgstr "Ôte" #: management/kxmlcommandselector.cpp:54 msgid "New command" msgstr "Novele kimande" #: management/kxmlcommandselector.cpp:55 msgid "Edit command" msgstr "Candjî li cmande" #: management/kxmlcommandselector.cpp:72 msgid "&Browse..." msgstr "&Foyter..." #: management/kxmlcommandselector.cpp:73 msgid "Use co&mmand:" msgstr "Eployî li c&mande:" #: management/kxmlcommandselector.cpp:174 msgid "Command Name" msgstr "No del kimande:" #: management/kxmlcommandselector.cpp:174 #, fuzzy msgid "Enter an identification name for the new command:" msgstr "Dinez on no pol djeu d' rascourtis:" #: management/kxmlcommandselector.cpp:183 #, fuzzy msgid "" "A command named %1 already exists. Do you want to continue and edit the " "existing one?" msgstr "I gn a ddja on fitchî lomé «%s». El voloz vs replaecî?" #: management/kxmlcommandselector.cpp:220 #, fuzzy msgid "Internal error. The XML driver for the command %1 could not be found." msgstr "Dji n' sai trover l' mineu po li scrirece %1." #: management/kxmlcommandselector.cpp:238 msgid "output" msgstr "rexhowe" #: management/kxmlcommandselector.cpp:242 msgid "undefined" msgstr "nén defini" #: management/kxmlcommandselector.cpp:247 msgid "not allowed" msgstr "nén permetou" #: management/kxmlcommandselector.cpp:253 msgid "(Unavailable: requirements not satisfied)" msgstr "" #: management/kmlistview.cpp:125 msgid "Print System" msgstr "Sistinme d' imprimaedje" #: management/kmlistview.cpp:128 msgid "Classes" msgstr "classes" #: management/kmlistview.cpp:131 msgid "Printers" msgstr "Sicrireces" #: management/kmlistview.cpp:134 msgid "Specials" msgstr "Speciåles" #: management/kmpropdriver.cpp:36 msgid "Manufacturer:" msgstr "Fabricant:" #: management/kmpropdriver.cpp:37 msgid "Printer model:" msgstr "Modele del sicrirece:" #: management/kmpropdriver.cpp:38 msgid "Driver info:" msgstr "Infôrmåcion sol mineu:" #: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 msgid "Driver Settings" msgstr "Tchuzes pol mineu" #: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 msgid "Jobs" msgstr "Bouyes" #: management/kmconfigjobs.cpp:37 msgid "Jobs Shown" msgstr "Bouyes håynêyes" #: management/kmconfigjobs.cpp:42 msgid "Maximum number of jobs shown:" msgstr "Nombe macsimom di bouyes a håyner:" #: management/kmwname.cpp:34 msgid "General Information" msgstr "Totes sôres d' infôrmåcions" #: management/kmwname.cpp:37 msgid "" "

Enter the information concerning your printer or class. Name " "is mandatory, Location and Description " "are not (they may even not be used on some systems).

" msgstr "" "

Dinez les infôrmåcions å dfait di vosse sicrirece ou d' vosse classe. I fåt " "k' vos dnéxhe li No. Mins vos n' estoz nén oblidjî do dner èn " "Eplaeçmint ni on Discrijhaedje (i gn a minme des sistinmes k' i gn a " "ki n' eployèt nén tot ça).

" #: management/kmwname.cpp:39 msgid "Name:" msgstr "No:" #: management/kmwname.cpp:48 msgid "You must supply at least a name." msgstr "Vos dvoz dner pol moens on no." #: management/kmwname.cpp:56 msgid "" "It is usually not a good idea to include spaces in printer name: it may prevent " "your printer from working correctly. The wizard can strip all spaces from the " "string you entered, resulting in %1; what do you want to do?" msgstr "" "Sovint, ci n' est nén ene boune idêye di stitchî des espåçmints dvins l' no d' " "ene sicrirece. Ça s' pôreut minme ki li scrirece ni rote nén comifåt. Si vos " "voloz, li macrea pout rsaetchî tos les espåçmints foû di çou k' vos avoz scrît, " "çou ki denrè «%1». Cwè çki vos voloz fé?" #: management/kmwname.cpp:62 msgid "Strip" msgstr "Rissaetchî" #: kprinterimpl.cpp:510 management/kmwname.cpp:62 msgid "Keep" msgstr "Wårder" #: management/kmwbackend.cpp:54 msgid "Backend Selection" msgstr "Tchoezi l' programe fondmint" #: management/kmwbackend.cpp:68 msgid "You must select a backend." msgstr "Vos dvoz tchoezi on programe fondmint (backend), oblidjî." #: management/kmwbackend.cpp:115 msgid "&Local printer (parallel, serial, USB)" msgstr "Sicrirece &locåle (paralele, séreye, USB)" #: management/kmwbackend.cpp:116 msgid "" "" "

Locally-connected printer

" "

Use this for a printer connected to the computer via a parallel, serial or " "USB port.

" msgstr "" #: management/kmwbackend.cpp:122 msgid "&SMB shared printer (Windows)" msgstr "Sicrirece pårtaedjeye pa &SMB (Windows)" #: management/kmwbackend.cpp:123 msgid "" "" "

Shared Windows printer

" "

Use this for a printer installed on a Windows server and shared on the " "network using the SMB protocol (samba).

" msgstr "" #: management/kmwbackend.cpp:130 msgid "&Remote LPD queue" msgstr "Caweye LPD l&on" #: management/kmwbackend.cpp:131 msgid "" "" "

Print queue on a remote LPD server

" "

Use this for a print queue existing on a remote machine running a LPD print " "server.

" msgstr "" #: management/kmwbackend.cpp:137 msgid "Ne&twork printer (TCP)" msgstr "Sicrirece &rantoele (TCP)" #: management/kmwbackend.cpp:138 msgid "" "" "

Network TCP printer

" "

Use this for a network-enabled printer using TCP (usually on port 9100) as " "communication protocol. Most network printers can use this mode.

" msgstr "" #: management/kminstancepage.cpp:61 msgid "" "Define/Edit here instances for the current selected printer. An instance is a " "combination of a real (physical) printer and a set of predefined options. For a " "single InkJet printer, you could define different print formats like " "DraftQuality, PhotoQuality or TwoSided" ". Those instances appear as normal printers in the print dialog and allow you " "to quickly select the print format you want." msgstr "" "Vaici, vos poloz defini ou candjî des instances del sicrirece tchoezeye. Ene " "instance, c' est ene sicrirece (l' ahesse) et les prémetowès tchuzes ki vont " "avou. Pol minme sicrirece a stritchetes, vos poloz bén defini sacwantès façons " "do rexhe, comeBrouyon, Foto ou Deus_costés" ". C' est totès instances, ki seront mostrêyes come des normålès scrireces dins " "l' purnea d' imprimaedje. Insi, vos pôroz tchoezi sol côp li cogne " "d' imprimaedje ki vos voloz." #: management/kminstancepage.cpp:87 msgid "New..." msgstr "Novea..." #: management/kminstancepage.cpp:88 msgid "Copy..." msgstr "Copyî..." #: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91 msgid "Set as Default" msgstr "Mete come prémetou" #: management/kminstancepage.cpp:92 msgid "Settings" msgstr "Apontiaedjes" #: management/kminstancepage.cpp:94 msgid "Test..." msgstr "Sayî..." #: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126 #: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145 #: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164 #: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190 #: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210 #: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260 msgid "(Default)" msgstr "(Prémetou)" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Instance Name" msgstr "No di l' instance" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Enter name for new instance (leave untouched for default):" msgstr "" "Dinez on no al novele instance (ou n' tapez rén si vos voloz wårder l' prémetou " "no):" #: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187 msgid "Instance name must not contain any spaces or slashes." msgstr "" "I n' pout nén aveur des espåçmints nerén des slaches divins les nos d' " "instance." #: management/kminstancepage.cpp:161 msgid "Do you really want to remove instance %1?" msgstr "Voloz vs po do bon oister l' instance %1?" #: management/kminstancepage.cpp:161 msgid "" "You can't remove the default instance. However all settings of %1 will be " "discarded. Continue?" msgstr "" "Vos n' poloz nén oister l' prémetowe instance. Mins nerén, totes les tchuzes " "po %1 seront tapêyes evoye. Voloz continouwer?" #: management/kminstancepage.cpp:213 #, fuzzy, c-format msgid "Unable to find instance %1." msgstr "Dji n' sai trover li scrirece %1." #: management/kminstancepage.cpp:215 #, c-format msgid "" "Unable to retrieve printer information. Message from printing system: %1." msgstr "" "Nén moyén d' obtini des infôrmåcions so li scrirece. Vochal li messaedje: %1." #: management/kminstancepage.cpp:232 #, fuzzy msgid "The instance name is empty. Please select an instance." msgstr "I gn a nole rissource sitandård! Tchoezixhoz è ene." #: management/kminstancepage.cpp:264 msgid "Internal error: printer not found." msgstr "Divintrinne aroke: li scrirece n' a nén stî trovêye." #: management/kminstancepage.cpp:268 #, c-format msgid "Unable to send test page to %1." msgstr "Nén moyén d' evoyî ene pådje di saye so %1." #: management/kmpages.cpp:69 msgid "Instances" msgstr "Instances" #: management/kmspecialprinterdlg.cpp:46 msgid "Add Special Printer" msgstr "Radjouter ene sicrirece sipeciåle" #: management/kmspecialprinterdlg.cpp:58 msgid "&Location:" msgstr "&Eplaeçmint:" #: management/kmspecialprinterdlg.cpp:66 msgid "Command &Settings" msgstr "A&pontiaedje del kimande" #: management/kmspecialprinterdlg.cpp:69 msgid "Outp&ut File" msgstr "Fitchî di re&xhowe" #: management/kmspecialprinterdlg.cpp:71 msgid "&Enable output file" msgstr "&Mete en alaedje li fitchî di rexhowe" #: management/kmspecialprinterdlg.cpp:88 msgid "Filename e&xtension:" msgstr "Ca&wete do no d' fitchî:" #: management/kmspecialprinterdlg.cpp:105 msgid "" "

The command will use an output file. If checked, make sure the command " "contains an output tag.

" msgstr "" "

Li cmande si sievrè d' on fitchî d' rexhowe. Si vs purdoz cisse tchuze la, " "waitîz bén ki li cmande evoye po do bon ene sacwè come rexhowe.

" #: management/kmspecialprinterdlg.cpp:108 #, c-format msgid "" "

The command to execute when printing on this special printer. Either enter " "the command to execute directly, or associate/create a command object with/for " "this special printer. The command object is the preferred method as it provides " "support for advanced settings like mime type checking, configurable options and " "requirement list (the plain command is only provided for backward " "compatibility). When using a plain command, the following tags are " "recognized:

" "
    " "
  • %in: the input file (required).
    • " "
  • %out: the output file (required if using an output file).
    • " "
  • %psl: the paper size in lower case.
    • " "
  • %psu: the paper size with the first letter in upper case.
" msgstr "" "

Li cmande a eployî po fé rexhe ene sacwè so li scrirece sipeciåle. Vos poloz " "taper direk li cmande a eployî ou don bén aloyî ene kimande a li scrirece ou " "loyî après èn objet di cmande. I våt mî eployî ene kimande, ca vos pôroz defini " "des spepieusès tchuzes, come metans: li verifiaedje des sôres MIME, des tchuzes " "a vosse môde, des djivêyes di prérekis (li cmande tote seule n' est la k' pol " "copatibilité en erî). Avou ene kimande, ces shûtes la sont ricnoxhowes:

" "
    " "
  • %in: li fitchî d' intrêye (doet esse la).
    • " "
  • %out: li fitchî d' rexhowe (doet esse la si vs eployîz on fitchî d' " "rexhowe).
    • " "
  • %psl: li grandeu do papî (e ptitès letes).
    • " "
  • %psu: li grandeu do papî (li prumire lete est grande).
" #: management/kmspecialprinterdlg.cpp:118 msgid "" "

The default mimetype for the output file (e.g. application/postscript).

" msgstr "" "

Li prémetowe sôre MIME pol fitchî di rexhowe (eg: " "application/postscript).

" #: management/kmspecialprinterdlg.cpp:121 msgid "

The default extension for the output file (e.g. ps, pdf, ps.gz).

" msgstr "

Li prémetowe cawete pol fitchî di rexhowe (eg: ps, pdf, ps.gz).

" #: management/kmspecialprinterdlg.cpp:170 msgid "You must provide a non-empty name." msgstr "Vos dvoz dner on no ki n' est nén vude." #: management/kmspecialprinterdlg.cpp:178 #, c-format msgid "Invalid settings. %1." msgstr "Tchuzes nén valåbes. %1" #: management/kmspecialprinterdlg.cpp:197 #, c-format msgid "Configuring %1" msgstr "Apontiaedje di %1" #: tdefilelist.cpp:42 msgid "" " Add File button " "

This button calls the 'File Open' dialog to let you select a file " "for printing. Note, that " "

    " "
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " "PNG, GIF and many other graphic formats. " "
  • you can select various files from different paths and send them as one " "\"multi-file job\" to the printing system.
" msgstr "" #: tdefilelist.cpp:54 msgid "" " Remove File button " "

This button removes the highlighted file from the list of to-be-printed " "files. " msgstr "" #: tdefilelist.cpp:59 msgid "" " Move File Up button " "

This button moves the highlighted file up in the list of files to be " "printed.

" "

In effect, this changes the order of the files' printout.

" msgstr "" #: tdefilelist.cpp:66 msgid "" " Move File Down button " "

This button moves the highlighted file down in the list of files to be " "printed.

" "

In effect, this changes the order of the files' printout.

" msgstr "" #: tdefilelist.cpp:73 msgid "" " File Open button " "

This button tries to open the highlighted file, so you can view or edit it " "before you send it to the printing system.

" "

If you open files, TDEPrint will use the application matching the MIME type " "of the file.

" msgstr "" #: tdefilelist.cpp:82 msgid "" " File List view " "

This list displays all the files you selected for printing. You can see the " "file name(s), file path(s) and the file (MIME) type(s) as determined by " "TDEPrint. You may re-arrange the initial order of the list with the help of " "the arrow buttons on the right.

" "

The files will be printed as a single job, in the same order as displayed in " "the list.

" "

Note: You can select multiple files. The files may be in multiple " "locations. The files may be of multiple MIME types. The buttons on the right " "side let you add more files, remove already selected files from the list, " "re-order the list (by moving files up or down), and open files. If you open " "files, TDEPrint will use the application matching the MIME type of the file.

" "" msgstr "" #: tdefilelist.cpp:103 msgid "Path" msgstr "Tchimin" #: tdefilelist.cpp:115 msgid "Add file" msgstr "Radjouter fitchî" #: tdefilelist.cpp:121 msgid "Remove file" msgstr "Oister fitchî" #: tdefilelist.cpp:128 msgid "Open file" msgstr "Drovi fitchî" #: tdefilelist.cpp:149 msgid "" "Drag file(s) here or use the button to open a file dialog. Leave empty for " "<STDIN>." msgstr "" "Saetchîz on ou des fitchîs chal ou eployîz l' boton po drovi ene boesse. Leyîz " "vude po-z eployî <STDIN>." #: driver.cpp:385 foomatic2loader.cpp:268 msgid "Adjustments" msgstr "Adjustumints" #: plugincombobox.cpp:33 msgid "" " Print Subsystem Selection " "

This combo box shows (and lets you select) a print subsystem to be used by " "TDEPrint. (This print subsystem must, of course, be installed inside your " "Operating System.) TDEPrint usually auto-detects the correct print subsystem by " "itself upon first startup. Most Linux distributions have \"CUPS\", the " "Common UNIX Printing System. " msgstr "" #: plugincombobox.cpp:45 msgid "Print s&ystem currently used:" msgstr "&Sistinme d' imprimaedje eployî pol moumint:" #: plugincombobox.cpp:91 msgid "" " Current Connection " "

This line shows which CUPS server your PC is currently connected to for " "printing and retrieving printer info. To switch to a different CUPS server, " "click \"System Options\", then select \"Cups server\" and fill in the required " "info. " msgstr "" #: driverview.cpp:47 msgid "" " List of Driver Options (from PPD). " "

The upper pane of this dialog page contains all printjob options as laid " "down in the printer's description file (PostScript Printer Description == " "'PPD')

" "

Click on any item in the list and watch the lower pane of this dialog page " "display the available values.

" "

Set the values as needed. Then use one of the pushbuttons below to " "proceed:

" "
    " "
  • 'Save' your settings if you want to re-use them in your next " "job(s) too. 'Save' will store your settings permanently until you " "change them again.
    • . " "
  • Click 'OK' (without a prior click on 'Save'" ", if you want to use your selected settings just once, for the next print job. " "'OK' will forget your current settings when kprinter is closed again, " "and will start next time with the previously saved defaults.
    • " "
  • 'Cancel' will not change anything. If you proceed to print after " "clicking 'Cancel', the job will print with the default settings of " "this queue.
" "

Note. The number of available job options depends strongly on the " "actual driver used for your print queue. 'Raw' " "queues do not have a driver or a PPD. For raw queues this tab page is not " "loaded by TDEPrint, and thus is not present in the kprinter dialog.

" msgstr "" #: driverview.cpp:71 msgid "" " List of Possible Values for given Option (from PPD). " "

The lower pane of this dialog page contains all possible values of the " "printoption highlighted above, as laid down in the printer's description file " "(PostScript Printer Description == 'PPD')

" "

Select the value you want and proceed.

" "

Then use one of the pushbuttons below to leave this dialog:

" "
    " "
  • 'Save' your settings if you want to re-use them in your next " "job(s) too. 'Save' will store your settings permanently until you " "change them again.
    • . " "
  • Click 'OK' if you want to use your selected settings just once, " "for the next print job. 'OK' will forget your current settings when " "kprinter is closed again, and will start next time with your previous " "defaults.
    • " "
  • 'Cancel' will not change anything. If you proceed to print after " "clicking 'Cancel', the job will print with the default settings of " "this queue.
" "

Note. The number of available job options depends strongly on the " "actual driver used for your print queue. 'Raw' " "queues do not have a driver or a PPD. For raw queues this tab page is not " "loaded by TDEPrint, and thus is not present in the kprinter dialog.

" msgstr "" #: kprinter.cpp:280 msgid "Initialization..." msgstr "Enondaedje..." #: kprinter.cpp:283 kprinter.cpp:909 #, c-format msgid "Generating print data: page %1" msgstr "Dji djenere les dnêyes po l' imprimaedje: pådje %1" #: kprinter.cpp:429 msgid "Previewing..." msgstr "Préveyaedje..." #: tdeprintd.cpp:158 kprinter.cpp:690 #, c-format msgid "" "

A print error occurred. Error message received from system:

" "
%1" msgstr "" "

Gn a åk ki n' a nén stî avou l' rexhaedje so li scrirece. Messaedje " "d' aroke evoyî på sistinme:

" "
%1" #: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 msgid "" "No valid print executable was found in your path. Check your installation." msgstr "" "Gn a pont d' programe d' imprimaedje dins vosse tchimin ($PATH). Verifyîz voste " "astalaedje." #: foomatic/kmfoomaticmanager.cpp:70 #, fuzzy msgid "This is not a Foomatic printer" msgstr "" "Çouchal n' est nén on fitchî locå.\n" #: foomatic/kmfoomaticmanager.cpp:75 #, fuzzy msgid "Some printer information are missing" msgstr "I gn a des infôrmåcions sol sicrirece ki mankèt." #: kmmanager.cpp:70 msgid "This operation is not implemented." msgstr "Ciste ovraedje la, dji nel sai fé." #: kmmanager.cpp:169 msgid "Unable to locate test page." msgstr "Nén moyén do trover li pådje di saye." #: kmmanager.cpp:449 msgid "Can't overwrite regular printer with special printer settings." msgstr "" "Dji n' pou nén spotchî l' apontiaedje del sicrirece come il est pol moumint " "avou èn apontiaedje sipeciå." #: kmmanager.cpp:478 #, c-format msgid "Parallel Port #%1" msgstr "Pôrt paralele lº %1" #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 #, c-format msgid "Unable to load TDE print management library: %1" msgstr "" "Dji n' sai tcherdjî li livreye di TDE pol manaedjmint d' l' imprimaedje: %1" #: kmmanager.cpp:491 kxmlcommand.cpp:669 msgid "Unable to find wizard object in management library." msgstr "" "Nén moyén do trover l' programe «nûton» dins l' livreye di manaedjmint." #: kmmanager.cpp:507 msgid "Unable to find options dialog in management library." msgstr "" "Nén moyén do trover l' boesse avou les tchuzes dins l' livreye di manaedjmint." #: kmmanager.cpp:534 msgid "No plugin information available" msgstr "Gn a nole infôrmåcion so les tchôke divins" #: lpdunix/kmlpdunixmanager.cpp:210 msgid "Description unavailable" msgstr "Pont di discrijhaedje" #: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271 #: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380 #, c-format msgid "Remote printer queue on %1" msgstr "Cawêye d' imprimaedje å lon so %1" #: kmspecialmanager.cpp:53 msgid "" "A file share/tdeprint/specials.desktop was found in your local TDE directory. " "This file probably comes from a previous TDE release and should be removed in " "order to manage global pseudo printers." msgstr "" "Gn a on fitchî share/tdeprint/specials.desktop " "dvins vosse ridant TDE locå. Ci fitchî la est dandjureu on rmanant d' ene veye " "modêye di TDE. Vos l' duvrîz oister por vos saveur manaedjî les " "pseudoscrireces globålmint." #: kprinterimpl.cpp:156 msgid "Cannot copy multiple files into one file." msgstr "Dji n' sai copyî sacwants fitchîs dins on seul." #: kprinterimpl.cpp:165 msgid "Cannot save print file to %1. Check that you have write access to it." msgstr "" "Dji n' sai schaper li fitchî d' imprimaedje dins %1. Loukîz si vs avoz les " "droets k' i fåt so ç' fitchî la." #: kprinterimpl.cpp:233 #, c-format msgid "Printing document: %1" msgstr "Imprimaedje do documint: %1" #: kprinterimpl.cpp:251 #, c-format msgid "Sending print data to printer: %1" msgstr "Dj' evoye les dnêyes a rexhe so li scrirece: %1" #: kprinterimpl.cpp:279 msgid "Unable to start child print process. " msgstr "Nén moyén d' enonder li processus d' imprimaedje." #: kprinterimpl.cpp:281 msgid "" "The TDE print server (tdeprintd) could not be contacted. Check that this " "server is running." msgstr "" "Nén moyén d' atôchî li sierveu d' imprimaedje di TDE (tdeprint" "). Waitîz si ç' sierveu la toûne pol moumint." #: kprinterimpl.cpp:283 #, fuzzy msgid "" "_: 1 is the command that is given to\n" "Check the command syntax:\n" "%1 " msgstr "" "Verifyîz li sintacse del kimande:\n" "%1 " #: kprinterimpl.cpp:290 msgid "No valid file was found for printing. Operation aborted." msgstr "Nou valåbe fitchî di trover po-z imprimer. Dj' a fwait berwete." #: kprinterimpl.cpp:325 msgid "" "

Unable to perform the requested page selection. The filter psselect " "cannot be inserted in the current filter chain. See Filter " "tab in the printer properties dialog for further information.

" msgstr "" "

Nén moyén do tchoezi l' pådje come vos avoz dmandé. Nén moyén do stitchî l' " "passete psselect dins l' tchinne des passetes. Loukîz l' linwete " "Passete dins l' boesse des prôpietés po l' imprimaedje po ndè saveur did " "pus.

" #: kprinterimpl.cpp:355 #, fuzzy msgid "

Could not load filter description for %1.

" msgstr "Vos n' avoz nén les droets po-z enonder %1." #: kprinterimpl.cpp:371 msgid "" "

Error while reading filter description for %1" ". Empty command line received.

" msgstr "" "

Åk n' a nén stî come dji léjheu li discrijhaedje del passete po %1" ". Dj' a rçû ene roye di cmande k' esteut vude.

" #: kprinterimpl.cpp:385 msgid "" "The MIME type %1 is not supported as input of the filter chain (this may happen " "with non-CUPS spoolers when performing page selection on a non-PostScript " "file). Do you want TDE to convert the file to a supported format?

" msgstr "" "Li sôre MIME %1 n' est nén sopoirtêye come intrêye del tchinne di passete (ça " "arive avou des ôtès manaedjeus d' imprimaedje ki CUPS cwand on tchoezi des " "pådjes dins on fitchî nén PostScript). Voloz vs ki TDE coviertixhe li fitchî po " "ndè fé ene cogne k' est bén sopoirtêye?

" #: kprinterimpl.cpp:389 kprinterimpl.cpp:509 msgid "Convert" msgstr "Covierser" #: kprinterimpl.cpp:399 msgid "Select MIME Type" msgstr "Tchoezixhoz sôre MIME" #: kprinterimpl.cpp:400 msgid "Select the target format for the conversion:" msgstr "Tchoezi l' cogne pol coviersaedje:" #: kprinterimpl.cpp:404 kprinterimpl.cpp:430 msgid "Operation aborted." msgstr "Operåcion côpêye." #: kprinterimpl.cpp:410 msgid "No appropriate filter found. Select another target format." msgstr "Nole valåbe passete di trovêye. Tchoezixhoz ene ôte cogne." #: kprinterimpl.cpp:423 msgid "" "Operation failed with message:" "
%1" "
Select another target format." msgstr "" "L' operåcion a fwait berwete avou l' messaedje:" "
%1" "
Tchoezixhoz ene ôte cogne." #: kprinterimpl.cpp:441 msgid "Filtering print data" msgstr "Dji passe les dnêyes po l' impriamaedje" #: kprinterimpl.cpp:445 msgid "Error while filtering. Command was: %1." msgstr "Åk n' a nén stî tins do passaedje. Li cmande esteut :%1." #: kprinterimpl.cpp:487 #, fuzzy msgid "The print file is empty and will be ignored:

%1

" msgstr "I n' a nol uzeu lomé %1." #: kprinterimpl.cpp:497 msgid "" "The file format %1 is not directly supported by the current " "print system. You now have 3 options: " "
    " "
  • TDE can attempt to convert this file automatically to a supported format. " "(Select Convert)
    • " "
  • You can try to send the file to the printer without any conversion. " "(Select Keep)
    • " "
  • You can cancel the printjob. (Select Cancel)
" "Do you want TDE to attempt and convert this file to %2?" msgstr "" "Li cogne di fitchî %1 n' est nén sopoirtêye tot droet på sistinme " "d' imprimaedje come il est enute. Vos avoz troes tchuzes: " "
    " "
  • TDE pout assayî do covierser ç' fitchî la tot seu pol candjî èn ene cogne " "k' est sopoirtêye. (tchoezixhoz Covierser)
    • " "
  • Vos poloz sayî d' evoyî l' fitchî a li scrirece sins l' covierser. " "(tchoezixhoz Wårder)
    • " "
  • Vos ploz rinoncî a-z imprimer. (tchoezixhoz Rinoncî)
" "Voloz vs ki TDE assaye do covierser ç' fitchî la a %2?" #: kprinterimpl.cpp:518 msgid "" "No appropriate filter was found to convert the file format %1 into %2." "
" "
    " "
  • Go to System Options -> Commands to look through the list of " "possible filters. Each filter executes an external program.
    • " "
  • See if the required external program is available.on your system.
" "" msgstr "" #: kpgeneralpage.cpp:85 msgid "ISO A4" msgstr "ISO A4" #: kpgeneralpage.cpp:89 msgid "Folio" msgstr "Folio" #: kpgeneralpage.cpp:90 msgid "US #10 Envelope" msgstr "Ewalpeure US #10" #: kpgeneralpage.cpp:91 msgid "ISO DL Envelope" msgstr "Ewalpeure ISO DL" #: kpgeneralpage.cpp:92 msgid "Tabloid" msgstr "Tabloyide" #: kpgeneralpage.cpp:93 msgid "ISO A3" msgstr "ISO A3" #: kpgeneralpage.cpp:94 msgid "ISO A2" msgstr "ISO A2" #: kpgeneralpage.cpp:95 msgid "ISO A1" msgstr "ISO A1" #: kpgeneralpage.cpp:96 msgid "ISO A0" msgstr "ISO A0" #: kpgeneralpage.cpp:106 msgid "Upper Tray" msgstr "Ridant do dzeu" #: kpgeneralpage.cpp:107 msgid "Lower Tray" msgstr "Ridant do dzo" #: kpgeneralpage.cpp:108 msgid "Multi-Purpose Tray" msgstr "Ridant po totes sôres" #: kpgeneralpage.cpp:109 msgid "Large Capacity Tray" msgstr "Gros ridant" #: kpgeneralpage.cpp:113 msgid "Normal" msgstr "Normå" #: kpgeneralpage.cpp:114 msgid "Transparency" msgstr "Weyoûtes" #: kpgeneralpage.cpp:123 msgid "" " " "

\"General\"

" "

This dialog page contains general print job settings. General " "settings are applicable to most printers, most jobs and most job file types. " "

To get more specific help, enable the \"WhatsThis\" cursor and click on any " "of the text labels or GUI elements of this dialog. " msgstr "" #: kpgeneralpage.cpp:131 msgid "" " " "

Page size: Select paper size to be printed on from the drop-down " "menu.

" "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o PageSize=...         # examples: \"A4\" or \"Letter\"

" "" msgstr "" #: kpgeneralpage.cpp:144 msgid "" " " "

Paper type: Select paper type to be printed on from the drop-down " "menu.

" "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o MediaType=...        # example: \"Transparency\"

" msgstr "" #: kpgeneralpage.cpp:157 msgid "" " " "

Paper source: Select paper source tray for the paper to be printed on " "from the drop-down menu. " "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
"

" msgstr "" #: kpgeneralpage.cpp:170 msgid "" " " "

Image Orientation: Orientation of the printed page image on your " "paper is controlled by the radio buttons. By default, the orientation is " "Portrait " "

You can select 4 alternatives: " "

    " "
  • Portrait..Portrait is the default setting.
    • " "
  • Landscape.
    • " "
  • Reverse Landscape. Reverse Landscape prints the images upside down. " "
    • " "
  • Reverse Portrait. Reverse Portrait prints the image upside " "down.
The icon changes according to your selection.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o orientation-requested=...       # examples: \"landscape\" or "
"\"reverse-portrait\"

" msgstr "" #: kpgeneralpage.cpp:191 msgid "" " " "

Duplex Printing: These controls may be grayed out if your printer " "does not support duplex printing (i.e. printing on both sides of the " "sheet). These controls are active if your printer supports duplex printing. " "

You can choose from 3 alternatives:

" "
    " "
  • None. This prints each page of the job on one side of the sheets " "only.
    • " "
  • Long Side. This prints the job on both sides of the paper sheets. " "It prints the job in a way so that the backside has the same orientation as the " "front side if you turn the paper over the long edge. (Some printer drivers " "name this mode duplex-non-tumbled).
    • " "
  • Short Side. This prints the job on both sides of the paper sheets. " "It prints the job so that the backside has the reverse orientation from the " "front side if you turn the paper over the long edge, but the same orientation, " "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled).
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
"

" msgstr "" #: kpgeneralpage.cpp:217 msgid "" " " "

Banner Page(s): Select banner(s) to print one or two special sheets " "of paper just before or after your main job.

" "

Banners may contain some pieces of job information, such as user name, time " "of printing, job title and more.

" "

Banner pages are useful to separate different jobs more easily, especially " "in a multi-user environment.

" "

Hint: You can design your own banner pages. To make use of " "them, just put the banner file into the standard CUPS banners " "directory (This is usually \"/usr/share/cups/banner/\" " "Your custom banner(s) must have one of the supported printable formats. " "Supported formats are ASCII text, PostScript, PDF and nearly any image format " "such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " "menu after a restart of CUPS.

" "

CUPS comes with a selection of banner pages.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
"

" msgstr "" #: kpgeneralpage.cpp:239 msgid "" " " "

Pages per Sheet: You can choose to print more than one page onto " "each sheet of paper. This is sometimes useful to save paper.

" "

Note 1: the page images get scaled down accordingly to print 2 or 4 " "pages per sheet. The page image does not get scaled if you print 1 page per " "sheet (the default setting.). " "

Note 2: If you select multiple pages per sheet here, the scaling and " "re-arranging is done by your printing system. Be aware, that some printers can " "by themselves print multiple pages per sheet. In this case you find the option " "in the printer driver settings. Be careful: if you enable multiple pages per " "sheet in both places, your printout will not look as you intended.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o number-up=...        # examples: \"2\" or \"4\"

" msgstr "" #: kpgeneralpage.cpp:263 kpqtpage.cpp:118 msgid "Page s&ize:" msgstr "&Grandeu del pådje:" #: kpgeneralpage.cpp:267 msgid "Paper t&ype:" msgstr "&Sôre di papî:" #: kpgeneralpage.cpp:271 msgid "Paper so&urce:" msgstr "&Provnance do papî:" #: kpgeneralpage.cpp:291 msgid "Duplex Printing" msgstr "Imprimaedje recto-verso" #: kpgeneralpage.cpp:294 kpqtpage.cpp:143 msgid "Pages per Sheet" msgstr "Pådjes pa foye" #: kpgeneralpage.cpp:300 kpqtpage.cpp:125 msgid "&Portrait" msgstr "D' &astampé" #: kpgeneralpage.cpp:301 kpqtpage.cpp:128 msgid "&Landscape" msgstr "Di &coûtchî" #: kpgeneralpage.cpp:302 msgid "&Reverse landscape" msgstr "Coûtchî å&rvier" #: kpgeneralpage.cpp:303 msgid "R&everse portrait" msgstr "Poi&rtrait årvier" #: kpgeneralpage.cpp:308 #, fuzzy msgid "" "_: duplex orientation\n" "&None" msgstr "Lon&gou costé" #: kpgeneralpage.cpp:309 msgid "" "_: duplex orientation\n" "Lon&g side" msgstr "Lon&gou costé" #: kpgeneralpage.cpp:310 msgid "" "_: duplex orientation\n" "S&hort side" msgstr "&Court costé" #: kpgeneralpage.cpp:322 msgid "S&tart:" msgstr "&Kimince:" #: kpgeneralpage.cpp:323 msgid "En&d:" msgstr "&Difén:" #: ppdloader.cpp:173 msgid "(line %1): " msgstr "(roye %1): " #: droptionview.cpp:61 msgid "Value:" msgstr "Valixhance:" #: droptionview.cpp:167 msgid "String value:" msgstr "Valixhance del tchinne:" #: droptionview.cpp:306 droptionview.cpp:341 msgid "No Option Selected" msgstr "Nole tchuze di tchoezeye" #: kmuimanager.cpp:158 #, c-format msgid "Configuration of %1" msgstr "Apontiaedje di %1" #: kmprinter.cpp:144 msgid "(rejecting jobs)" msgstr "(rifuze les bouyes)" #: kmprinter.cpp:144 msgid "(accepting jobs)" msgstr "(acceptêye les bouyes)" #: kprintprocess.cpp:75 msgid "File transfer failed." msgstr "Li transfer do fitchî a fwait berwete" #: kprintprocess.cpp:81 msgid "Abnormal process termination (%1)." msgstr "Li processus s' a achevé d' ene façon nén normåle (%1)." #: kprintprocess.cpp:83 msgid "%1: execution failed with message:

%2

" msgstr "" "%1: li programe a fwait berwete tot-z evoyant l' messaedje:" "

%2

" #: tdeprintd.cpp:176 msgid "" "Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" "Gn a sacwants fitchîs a-z imprimer ki l' démon di TDE ni sait lére. Ça pout " "ariver si vs sayîz do fé rexhe des fitchîs come èn ôte uzeu ki l' ci k' vos vs " "avoz siervou po moussî e sistinme. Por vos fé rexhe vos fitchîs, i vs fårè dné " "li scret da root." #: tdeprintd.cpp:181 #, fuzzy msgid "Provide root's Password" msgstr "Dinez li scret da root" #: tdeprintd.cpp:200 tdeprintd.cpp:202 #, c-format msgid "Printing Status - %1" msgstr "Avançmint d' l' imprimaedje - %1" #: tdeprintd.cpp:263 msgid "Printing system" msgstr "Sistinme d' imprimaedje" #: tdeprintd.cpp:266 msgid "Authentication failed (user name=%1)" msgstr "L' otintifiaedje a fwait berwete (no d' uzeu=%1)" #. i18n: file kprintpreviewui.rc line 13 #: rc.cpp:9 rc.cpp:21 #, no-c-format msgid "&PageMarks" msgstr "&PageMarks" #: kpcopiespage.cpp:46 msgid "" " " "

Page Selection

" "

Here you can control if you print a certain selection only out of all the " "pages from the complete document.

" msgstr "" #: kpcopiespage.cpp:51 msgid "" " All Pages: Select \"All\" to print the complete document. Since " "this is the default, it is pre-selected.

" msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " "if you want to print the page currently visible in your TDE application.

" "

Note: this field is disabled if you print from non-TDE applications " "like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

" msgstr "" #: kpcopiespage.cpp:60 msgid "" " Page Range: Choose a \"Page Range\" to select a subset of the " "complete document pages to be printed. The format is " "\"n,m,o-p,q,r,s-t, u\".

" "

Example: \"4,6,10-13,17,20,23-25\" " "will print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your " "document.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
" "

" msgstr "" #: kpcopiespage.cpp:74 msgid "" " Page Set: " "

Choose \"All Pages\", \"Even Pages\" or " "\"Odd Pages\" if you want to print a page selection matching one of these " "terms. The default is \"All Pages\".

" "

Note: If you combine a selection of a \"Page Range\" " "with a \"Page Set\" of \"Odd\" or \"Even\"" ", you will only get the odd or even pages from the originally selected page " "range. This is useful if you odd or even pages from the originally selected " "page range. This is useful if you want to print a page range in duplex on a " "simplex-only printer. In this case you can feed the paper to the printer twice; " "in the first pass, select \"Odd\" or \"Even\" (depending on your printer " "model), in second pass select the other option. You may need to " "\"Reverse\" the output in one of the passes (depending on your printer " "model).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-set=...        # example: \"odd\" or \"even\"

" "" msgstr "" #: kpcopiespage.cpp:97 msgid "" " Output Settings: Here you can determine the number of copies, the " "output order and the collate mode for the pages of your printjob. (Note, that " "the maximum number of copies allowed to print may be restricted by your print " "subsystem.)

" "

The 'Copies' setting defaults to 1.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o copies=...            # examples: \"5\" or \"42\"  "
"
     -o outputorder=...       # example:  \"reverse\" "
"
     -o Collate=...           # example:  \"true\" or \"false\"

" "." msgstr "" #: kpcopiespage.cpp:115 msgid "" " Number of Copies: Determine the number of requested copies here. " "You can increase or decrease the number of printed copies by clicking on the up " "and down arrows. You can also type the figure directly into the box.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o copies=...            # examples: \"5\" or \"42\"

" "" msgstr "" #: kpcopiespage.cpp:128 msgid "" " Collate Copies " "

If the \"Collate\" checkbox is enabled (default), the output order " "for multiple copies of a multi-page document will be \"1-2-3-..., 1-2-3-..., " "1-2-3-...\".

" "

If the \"Collate\" checkbox is disabled, the output order for " "multiple copies of a multi-page document will be \"1-1-1-..., 2-2-2-..., " "3-3-3-...\".

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o Collate=...           # example:  \"true\" or \"false\"

" "" msgstr "" #: kpcopiespage.cpp:142 msgid "" " Reverse Order " "

If the \"Reverse\" checkbox is enabled, the output order for " "multiple copies of a multi-page document will be \"...-3-2-1, ...-3-2-1, " "...-3-2-1\", if you also have enabled the \"Collate\" " "checkbox at the same time (the usual usecase).

" "

If the \"Reverse\" checkbox is enabled, the output order for " "multiple copies of a multi-page document will be \"...-3-3-3, ...-2-2-2, " "...-1-1-1\", if you have disabled the \"Collate\" " "checkbox at the same time.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o outputorder=...       # example:  \"reverse\"

" msgstr "" #: kpcopiespage.cpp:163 msgid "C&opies" msgstr "C&opeyes" #: kpcopiespage.cpp:167 msgid "Page Selection" msgstr "Tchoezi les pådjes" #: kpcopiespage.cpp:169 msgid "&All" msgstr "&Totafwait" #: kpcopiespage.cpp:171 msgid "Cu&rrent" msgstr "Pådje do &moumint" #: kpcopiespage.cpp:173 msgid "Ran&ge" msgstr "&Fortchete" #: kpcopiespage.cpp:178 msgid "" "

Enter pages or group of pages to print separated by commas (1,2-5,8).

" msgstr "" "

Tapez les pådjes ou les trokes di pådjes a-z imprimer et s' metoz on coma " "inte (metans: 1,2-5,8)

" #: kpcopiespage.cpp:182 msgid "Output Settings" msgstr "Apontiaedjes del rexhowe" #: kpcopiespage.cpp:184 msgid "Co&llate" msgstr "R&ashonner" #: kpcopiespage.cpp:186 msgid "Re&verse" msgstr "År&vier" #: kpcopiespage.cpp:191 msgid "Cop&ies:" msgstr "&Copeyes:" #: kpcopiespage.cpp:198 msgid "All Pages" msgstr "Totes les pådjes" #: kpcopiespage.cpp:199 msgid "Odd Pages" msgstr "Pådjes impaires" #: kpcopiespage.cpp:200 msgid "Even Pages" msgstr "Pådjes paires" #: kpcopiespage.cpp:202 msgid "Page &set:" msgstr "&Djeu d' pådjes:" #: kpcopiespage.cpp:257 msgid "Pages" msgstr "Pådjes" #: kprintpreview.cpp:137 msgid "Do you want to continue printing anyway?" msgstr "Voloz vs continouwer a-z imprimer l' fitchî mågré tot?" #: kprintpreview.cpp:145 kprintpreview.cpp:224 msgid "Print Preview" msgstr "Prévey divant d' imprimer" #: kprintpreview.cpp:275 msgid "" "The preview program %1 cannot be found. Check that the program is correctly " "installed and located in a directory included in your PATH environment " "variable." msgstr "" "Nén moyén do trover li programe %1 po prévey. Loukîz s' il est astalé comifåt " "et s' i s' trove dins on ridant k' est dins vosse tchimin (ça vout dire: vosse " "variåve d' evironmint $PATH)." #: kprintpreview.cpp:300 msgid "" "Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " "other external PostScript viewer could be found." msgstr "" "Li prévoeyaedje a fwait berwete: n' a nén avou moyén do trover li håyneu " "PostScript di TDE (KGhostView), ni èn ôte programe del minme sôre." #: kprintpreview.cpp:304 #, c-format msgid "" "Preview failed: TDE could not find any application to preview files of type %1." msgstr "" #: kprintpreview.cpp:314 #, c-format msgid "Preview failed: unable to start program %1." msgstr "Li prévoeyaedje a fwait berwete: nén moyén d' enonder l' programe %1." #: kprintpreview.cpp:319 msgid "Do you want to continue printing?" msgstr "Voloz continouwer a fé rexhe vosse fitchî?" #: kmfactory.cpp:221 msgid "There was an error loading %1. The diagnostic is:

%2

" msgstr "" "Åk n' a nén stî come dji voleu tcherdjî %1. Li diyagnostik est " "

%2

" #: kpdriverpage.cpp:48 #, fuzzy msgid "" "Some options selected are in conflict. You must resolve these conflicts " "before continuing. See Driver Settings tab for detailed information." msgstr "" "Dins vos tchuzes, i gn a ki s' contribatèt. Vos dvoz arindjî çoula divant " "do tcheryî pus lon. Tchoezixhoz l' linwete Tchuzes pol mineu " "po des spepieusès infôrmåcions." #: posterpreview.cpp:115 msgid "" "Poster preview not available. Either the poster " "executable is not properly installed, or you don't have the required version." msgstr "" "Nén moyén do prévey les afitches. Ça pout esse paski li programe poster " "n' est nén astalé comifåt ou k' vos n' avoz nén l' boune modêye." #: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 msgid "Printer Configuration" msgstr "Apontiaedje del sicrirece" #: kprinterpropertydialog.cpp:138 msgid "No configurable options for that printer." msgstr "Nole tchuze a-z apontyî po ci scrirece la." #: marginpreview.cpp:135 msgid "No preview available" msgstr "Nou prévoeyaedje" #: kpfileselectpage.cpp:33 msgid "&Files" msgstr "&Fitchîs" #: marginwidget.cpp:37 msgid "" " " "

Top Margin

. " "

This spinbox/text edit field lets you control the top margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror..

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.

" msgstr "" #: marginwidget.cpp:57 msgid "" " " "

Bottom Margin

. " "

This spinbox/text edit field lets you control the bottom margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:76 msgid "" " " "

Left Margin

. " "

This spinbox/text edit field lets you control the left margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:95 msgid "" " " "

Right Margin

. " "

This spinbox/text edit field lets you control the right margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:114 msgid "" " " "

Change Measurement Unit

. " "

You can change the units of measurement for the page margins here. Select " "from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).

" msgstr "" #: marginwidget.cpp:121 msgid "" " " "

Custom Margins Checkbox

. " "

Enable this checkbox if you want to modify the margins of your printouts " "

You can change margin settings in 4 ways: " "

    " "
  • Edit the text fields.
    • " "
  • Click spinbox arrows.
    • " "
  • Scroll wheel of wheelmouses.
    • " "
  • Drag margins in preview frame with mouse.
Note: " "The margin setting does not work if you load such files directly into " "kprinter, which have their print margins hardcoded internally, like as most " "PDF or PostScript files. It works for all ASCII text files however. It also may " "not work with non-TDE applications which fail to fully utilize the TDEPrint " "framework, such as OpenOffice.org.

" msgstr "" #: marginwidget.cpp:138 msgid "" " " "

\"Drag-your-Margins\"

. " "

Use your mouse to drag and set each margin on this little preview window. " "

" msgstr "" #: marginwidget.cpp:148 msgid "&Use custom margins" msgstr "Eployî des &mådjes a vosse môde" #: marginwidget.cpp:158 msgid "&Top:" msgstr "Al cope&te:" #: marginwidget.cpp:159 msgid "&Bottom:" msgstr "Al &valeye:" #: marginwidget.cpp:160 msgid "Le&ft:" msgstr "&Hintche:" #: marginwidget.cpp:161 msgid "&Right:" msgstr "&Droete:" #: marginwidget.cpp:164 msgid "Pixels (1/72nd in)" msgstr "Picsels (1/72 di pôce)" #: marginwidget.cpp:167 msgid "Inches (in)" msgstr "Pôces (in)" #: marginwidget.cpp:168 msgid "Centimeters (cm)" msgstr "Cintimetes (cm)" #: marginwidget.cpp:169 msgid "Millimeters (mm)" msgstr "Milimetes (mm)" #: driver.cpp:387 msgid "JCL" msgstr "JCL" #: kmvirtualmanager.cpp:161 msgid "" "You are about to set a pseudo-printer as your personal default. This " "setting is specific to TDE and will not be available outside TDE applications. " "Note that this will only make your personal default printer as undefined for " "non-TDE applications and should not prevent you from printing normally. Do you " "really want to set %1 as your personal default?" msgstr "" #: kpposterpage.cpp:42 msgid " 5. " msgstr "" #: kpposterpage.cpp:46 msgid "" " Print Poster (enabled or disabled). " "

If you enable this option, you can print posters of different sizes The " "printout will happen in the form 'tiles' printed on smaller paper " "sizes, which you can stitch together later. If you enable this option " "here, the 'Poster Printing' filter will be auto-loaded in the " "'Filters' tab of this dialog.

" "

This tab is only visible if the external 'poster' " "utility is discovered by TDEPrint on your system. ['poster' " "is a commandline utility that enables you to convert PostScript files into " "tiled printouts which allow for oversized appearance of the stitched-together " "tiles.]

" "

Note: The standard version of 'poster' will not work. Your system " "must use a patched version of 'poster'. Ask your operating system vendor to " "provide a patched version of 'poster' if he does not already.

" msgstr "" #: kpposterpage.cpp:68 msgid "" " Tile Selection widget " "

This GUI element is not only for viewing " "your selections: it also lets you interactively select the tile(s) you want to " "print.

" "

Hints " "

    " "
  • Click any tile to select it for printing.
    • " "
  • To select multiple tiles to be printed at once, 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) Be aware " "that the order of your clicking is also significant to the order of printing " "the different tiles.
Note 1: The order of your selection " "(and the order for printout of the tiles) is indicated by the contents of the " "text field below, labelled as 'Tile pages (to be printed):'" "

Note 2: By default no tile is selected. Before you can print (a part " " of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:89 msgid "" " Poster Size " "

Select the poster size you want from the dropdown list.

" "Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " "as 16 sheets of A4, or '84cm x 118.2cm'.]

" "

Notice, how the little preview window below changes with your change " "of poster size. It indicates to you how many tiles need to be printed to make " "the poster, given the selected paper size.

" "

Hint: The little preview window below is not just a passive icon. You " "can click on its individual tiles to select them for printing. To select " "multiple tiles to be printed at once, you need to 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) The order of your " "clicking is significant to the order of printing the different tiles. The order " "of your selection (and for the printed tiles) is indicated by the contents of " "the text field labelled as 'Tile pages (to be printed):'" "

Note: By default no tile is selected. Before you can print (a part " "of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:108 msgid "" " Paper Size " "

This field indicates the paper size the poster tiles will be printed on. To " "select a different paper size for your poster tiles, go to the 'General' tab " "of this dialog and select one from the dropdown list.

" "Available sizes are most standard paper sizes supported by your printer. Your " "printer's supported paper sizes are read from the printer driver info (as laid " "down in the 'PPD', the printer description file). " "Be aware that the 'Paper Size' selected may not be supported by 'poster' " "(example: 'HalfLetter') while it may well be supported by your printer. " "If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " "or 'Letter'. " "

Notice, how the little preview window below changes with your change " "of paper size. It indicates how many tiles need to be printed to make up the " "poster, given the selected paper and poster size.

" "

Hint: The little preview window below is not just a passive icon. You " "can click on its individual tiles to select them for printing. To select " "multiple tiles to be printed at once, you need to 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) The order of your " "clicking is significant to the order of printing the different tiles. The order " "of your selection (and for the printed tiles) is indicated by the contents of " "the text field labelled as 'Tile pages (to be printed):'" "

Note: By default no tile is selected. Before you can print (a part " "of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:132 msgid "" " Cut Margin selection " "

Slider and spinbox let you determine a 'cut margin' " "which will be printed onto each tile of your poster to help you cut the pieces " "as needed.

" "

Notice, how the little preview window above changes with your change " "of cut margins. It indicates to you how much space the cut margins will take " "away from each tile. " "

Be aware, that your cut margins need to be equal to or greater than " "the margins your printer uses. The printer's capabilities are described in the " "'ImageableArea' keywords of its driver PPD file.

" msgstr "" #: kpposterpage.cpp:143 msgid "" " Order and number of tile pages to be printed " "

This field displays and sets the individual tiles to be printed, as well as " "the order for their printout.

You can file the field with 2 different " "methods: " "
    " "
  • Either use the interactive thumbnail preview above and '[SHIFT]-click' on " "the tiles.
    • " "
  • Or edit this text field accordingly.
" "

When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " "one.

" "

Examples:

" "
    \"2,3,7,9,3\"  "
"
    \"1-3,6,8-11\"  "
msgstr ""

#: kpposterpage.cpp:160
msgid "Poster"
msgstr "Afitche"

#: kpposterpage.cpp:162
msgid "&Print poster"
msgstr "Re&xhe l' Afitche"

#: kpposterpage.cpp:176
msgid "Poste&r size:"
msgstr "&Grandeu di l' afitche:"

#: kpposterpage.cpp:178
msgid "Media size:"
msgstr "Grandeu do sopoirt:"

#: kpposterpage.cpp:180
msgid "Pri&nt size:"
msgstr "&Grandeu d' imprimaedje:"

#: kpposterpage.cpp:187
#, no-c-format
msgid "C&ut margin (% of media):"
msgstr "Cô&per l' mådje (% do sopoirt):"

#: kpposterpage.cpp:191
msgid "&Tile pages (to be printed):"
msgstr "Mete les pådjes a môde di &schayes po les imprimer:"

#: kpposterpage.cpp:198
msgid "Link/unlink poster and print size"
msgstr "Aloyî/disloyî ene afitche et l' grandeu d' imprimaedje"

#: kpposterpage.cpp:263
msgid "Unknown"
msgstr "Nén cnoxhou"

#: kxmlcommand.cpp:789
msgid "One of the command object's requirements is not met."
msgstr "I manke onk des objets k' i fåt po li cmande."

#: kxmlcommand.cpp:797 kxmlcommand.cpp:802
#, c-format
msgid "The command does not contain the required tag %1."
msgstr "I manke l' etikete %1 po li cmande. "

#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
msgid "&Export..."
msgstr "&Ebagaedje..."

#: kpfilterpage.cpp:42
msgid ""
"  Add Filter button "
"
This button calls a little dialog to let you select a filter here. 
 "
"
Note 1: You can chain different filters as long as you make  sure "
"that the output of one fits as input of the next. (TDEPrint  checks your "
"filtering chain and will warn you if you fail to do so.
  "
"
Note 2: The filters you define here are applied to your jobfile  "
"before it is handed downstream to your spooler and print  subsystem "
"(e.g. CUPS, LPRng, LPD).
  "
msgstr ""

#: kpfilterpage.cpp:54
msgid ""
"  Remove Filter button "
"
This button removes the highlighted filter from the list of filters. "
msgstr ""

#: kpfilterpage.cpp:59
msgid ""
"  Move Filter Up button "
"
This button moves the highlighted filter up in the list of filters, towards "
"the front of the filtering chain. 
 "
msgstr ""

#: kpfilterpage.cpp:64
msgid ""
"  Move Filter Down button "
"
This button moves the highlighted filter down in the list of filters, "
"towards the end of the filtering chain..
 "
msgstr ""

#: kpfilterpage.cpp:69
msgid ""
"  Configure Filter button "
"
This button lets you configure the currently highlighted filter. It opens a "
"separate dialog.  
 "
msgstr ""

#: kpfilterpage.cpp:75
msgid ""
"  Filter Info Pane "
"
This field shows some general info about the selected filter.  Amongst them "
"are:  "
"
      "
"
  • the filter name (as displayed in the TDEPrint user interface); "
"
    •   "
"
  • the filter requirements (that is the external program that needs  "
"to present and executable on this system); 
    •   "
"
  • the filter input format (in the form of one or several "
"MIME types accepted by the filter); 
    •   "
"
  • the filter output format (in the form of a MIME type  "
"generated by the filter); 
    •   "
"
  • a more or less verbose text describing the filter's operation.
    •   
  "
"
 "
msgstr ""

#: kpfilterpage.cpp:91
msgid ""
"  Filtering Chain (if enabled, is run before "
"actual  job submission to print system) "
"
This field shows which filters are currently selected to act as "
"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
"before they are  send downstream to your real print subsystem. 
  "
"
The list shown in this field may be empty (default). 
  "
"
The pre-filters act on the printjob in the order they are listed (from top "
"to bottom).  This is done by acting as a filtering chain "
"where the output of one filter  acts as input to the next. By putting the "
"filters into the wrong order, you can make  the filtering chain fail. For "
"example: if your file is ASCII text, and you want the  output being processed "
"by the 'Multipage per Sheet' filter, the first filter must be  one that "
"processes ASCII into PostScript. 
  "
"
TDEPrint can utilize any external filtering program which you may "
"find useful  through this interface. 
  "
"
TDEPrint ships preconfigured with support for a selection of common filters. "
"These  filters however need to be  installed independently from TDEPrint. These "
"pre-filters work for all print subsystems supported by TDEPrint (such "
"as CUPS, LPRng and LPD), because they are not depending on these.
 ."
"
 Amongst the pre-configured filters shipping with TDEPrint are: 
  "
"
      "
"
  • the Enscript text filter  
    •   "
"
  • a Multiple Pages per Sheet filter  "
"
  • a PostScript to PDF converter.
    •   "
"
  • a Page Selection/Ordering filter.
    •   "
"
  • a Poster Printing filter.
    •   "
"
  • and some more..
    •   
  To insert a filter into this list, simply "
"click on the funnel icon (topmost on  the right icon column group) and "
"proceed. 
 "
"
Please click on the other elements of this dialog to learn more about the "
"TDEPrint  pre-filters.  
 "
msgstr ""

#: kpfilterpage.cpp:125
msgid "Filters"
msgstr "Passetes"

#: kpfilterpage.cpp:141
msgid "Add filter"
msgstr "Radjouter ene passete"

#: kpfilterpage.cpp:146
msgid "Remove filter"
msgstr "Oister l' passete"

#: kpfilterpage.cpp:151
msgid "Move filter up"
msgstr "Fé monter l' passete"

#: kpfilterpage.cpp:156
msgid "Move filter down"
msgstr "Fé dischinde li passete"

#: kpfilterpage.cpp:161
msgid "Configure filter"
msgstr "Apontyî l' passete"

#: kpfilterpage.cpp:279
msgid "Internal error: unable to load filter."
msgstr "Divintrinne aroke: nén moyén do tcherdjî l' passete."

#: kpfilterpage.cpp:394
msgid ""
"
The filter chain is wrong. The output format of at least one filter is not "
"supported by its follower. See Filters tab for more information.
"
msgstr ""
"
Gn a ene sacwè ki n' va nén dins l' tchinne des passete. Li cogne del "
"rexhowe d' ene passete (pol moens) n' est nén comprijhe påzès passetes ki vnèt "
"après. Tchoezixhoz l' linwete Passetes po ndè saveur did pus.
"

#: kpfilterpage.cpp:408
msgid "Input"
msgstr "Intrêye"

#: kpqtpage.cpp:70
msgid ""
"   Selection of color mode: You can choose between 2 options:  "
"
    "
"
  • Color and
    •   "
"
  • Grayscale
  Note: This selection field may be grayed "
"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
"information about your print file. In this case the embedded color- or "
"grayscale information  of your printfile, and the default handling of the "
"printer take precedence.  "
msgstr ""

#: kpqtpage.cpp:79
msgid ""
"   Selection of page size: Select paper size to be printed on from  "
"the drop-down menu.  "
"
The exact list of choices depends on the printer driver (\"PPD\") you have "
"installed.  "
msgstr ""

#: kpqtpage.cpp:84
msgid ""
"   Selection of pages per sheet:  You can choose to print more than "
"one page onto each sheet of paper.  This is sometimes useful to save paper.  "
"
Note 1: the page images get scaled down accordingly to print 2 or 4 "
"pages per sheet.  The page image does not get scaled if you print 1 page per "
"sheet (the default setting.).  "
"
Note 2: If you select multiple pages per sheet here, the scaling and "
"re-arranging is done  by your printing system.  "
"
Note 3, regarding \"Other\": You cannot really select Other "
"as the number of  pages to print on one sheet.\"Other\" is checkmarked here for "
"information purposes only.  "
"
To select 8, 9, 16 or other numbers of  pages per sheet:  "
"
      "
"
  •  go to the tab headlined \"Filter\"
    •  "
"
  •  enable the Multiple Pages per Sheet filter 
    •  "
"
  •  and configure it (bottom-most button on the right of the \"Filters\" tab). "
"
    •  
 "
msgstr ""

#: kpqtpage.cpp:102
msgid ""
"   Selection of image orientation: Orientation of the printed  "
"pageimage on your paper is controlled by the radio buttons. By default,  the "
"orientation is Portrait  "
"
You can select 2 alternatives:  "
"
      "
"
  •  Portrait..Portrait is the default setting. 
    •   "
"
  •  Landscape. 
    •   
  The icon changes according to your "
"selection. "
msgstr ""

#: kpqtpage.cpp:113
msgid "Print Format"
msgstr "Cogne d' imprimaedje"

#: kpqtpage.cpp:123
msgid "Color Mode"
msgstr "Môde di coleur"

#: kpqtpage.cpp:135
msgid "Colo&r"
msgstr "&Coleur"

#: kpqtpage.cpp:138
msgid "&Grayscale"
msgstr "Liveas d' &gris"

#: kpqtpage.cpp:151
msgid "Ot&her"
msgstr "Ô&tes"