# translation of kcmarts.po to zh_CN # Copyright (C) 2003 Free Software Foundation, Inc. # Wang Jian , 2000 # Xiong Jiang , 2003 # msgid "" msgstr "" "Project-Id-Version: \n" "POT-Creation-Date: 2019-01-13 18:46+0100\n" "PO-Revision-Date: 2004-06-17 11:41+0800\n" "Last-Translator: Funda Wang \n" "Language-Team: zh_CN \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "TDE 简体中文翻译组" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "i18n-translation@lists.linux.net.cn" #: arts.cpp:109 msgid "" "Unable to start the sound server to retrieve possible sound I/O methods.\n" "Only automatic detection will be available." msgstr "" "无法启动声音服务器获取可能的声音 I/O 方式。\n" "仅有自动检测是可用的。" #: arts.cpp:146 msgid "" "

Sound System

Here you can configure aRts, TDE's sound server. This " "program not only allows you to hear your system sounds while simultaneously " "listening to an MP3 file or playing a game with background music. It also " "allows you to apply different effects to your system sounds and provides " "programmers with an easy way to achieve sound support." msgstr "" "

声音系统

您可以配置 aRts，TDE 的声音服务器。这个程序不仅允许您在听系" "统的声音的同时，欣赏 MP3 或玩有背景音乐的游戏，还允许您在系统声音上应用不同的" "效果，给程序员提供简单的方法获得音效支持。" #: arts.cpp:167 msgid "&General" msgstr "常规(&G)" #: arts.cpp:168 msgid "&Hardware" msgstr "硬件(&H)" #: arts.cpp:182 msgid "" "Normally, the sound server defaults to using the device called /dev/dsp for sound output. That should work in most cases. On some systems where " "devfs is used, however, you may need to use /dev/sound/dsp instead. " "Other alternatives are things like /dev/dsp0 or /dev/dsp1, if " "you have a soundcard that supports multiple outputs, or you have multiple " "soundcards." msgstr "" "通常，声音服务器默认使用设备 /dev/dsp 来进行声音输出。大多数情况下，" "这都可以正常工作。但是，在某些使用 devfs 的系统中，那么您应该使用 /dev/" "sound/dsp。如果您的声卡支持多输出，或您有多个声卡的话，其它备选的可以是 " "/dev/dsp0 或者 /dev/dsp1。" #: arts.cpp:184 msgid "" "Normally, the sound server defaults to using a sampling rate of 44100 Hz (CD " "quality), which is supported on almost any hardware. If you are using " "certain Yamaha soundcards, you might need to configure this to 48000 " "Hz here, if you are using old SoundBlaster cards, like SoundBlaster " "Pro, you might need to change this to 22050 Hz. All other values are " "possible, too, and may make sense in certain contexts (i.e. professional " "studio equipment)." msgstr "" "通常，声音服务器默认使用 44100 Hz 的采样率 (CD 音质)，这是几乎所有硬件都支持" "的。如果您正在使用某些 Yamaha声卡，您可能需要把采样率设为 48000 Hz，如" "果您正在使用 旧型号的 SoundBlaster 声卡，比如 SoundBlaster Pro，您可能" "需要把采样率设为 22050 Hz。其它的值，在某些特定的情况下，也是合理的 (例如，专" "业演播设备)。" #: arts.cpp:186 msgid "" "This configuration module is intended to cover almost every aspect of the " "aRts sound server that you can configure. However, there are some things " "which may not be available here, so you can add command line options " "here which will be passed directly to artsd. The command line options " "will override the choices made in the GUI. To see the possible choices, open " "a Konsole window, and type artsd -h." msgstr "" "这个配置模块用于配置您需要的几乎所有 aRts 声音服务器的特性。然而，有一些没有" "提供，所以您可以添加命令行选项，这些选项将直接传给artsd。命令行" "选项会取代 GUI 中的设置。如果要查看可能的选择，请打开一个 konsole 窗口，然后" "键入 artsd -h。" #: arts.cpp:195 msgid "Autodetect" msgstr "自动侦测" #: arts.cpp:245 msgid "kcmarts" msgstr "kcmarts" #: arts.cpp:246 msgid "The Sound Server Control Module" msgstr "声音服务器控制模块" #: arts.cpp:248 msgid "(c) 1999 - 2001, Stefan Westerfeld" msgstr "(C) 1999 - 2001, Stefan Westerfeld" #: arts.cpp:249 msgid "aRts Author" msgstr "aRts 作者" #: arts.cpp:433 msgid "" "The settings have changed since the last time you restarted the sound " "server.\n" "Do you want to save them?" msgstr "" "自从您上次启动声音服务器后设置发生了变化。\n" "您想要保存吗？" #: arts.cpp:436 msgid "Save Sound Server Settings?" msgstr "保存声音服务器设置吗？" #: arts.cpp:487 msgid "%1 milliseconds (%2 fragments with %3 bytes)" msgstr "%1 毫秒 (%2 个片断共 %3 字节)" #: arts.cpp:494 msgid "as large as possible" msgstr "尽可能大" #: arts.cpp:503 msgid "" "Impossible to start aRts with realtime priority because artswrapper is " "missing or disabled" msgstr "无法启动 aRts 的实时优先级，原因是 artswrapper 丢失或被禁用" #: arts.cpp:597 msgid "Restarting Sound System" msgstr "重新启动声音系统" #: arts.cpp:597 msgid "Starting Sound System" msgstr "启动声音系统" #: arts.cpp:598 msgid "Restarting sound system." msgstr "重新启动声音系统。" #: arts.cpp:598 msgid "Starting sound system." msgstr "启动声音系统。" #: arts.cpp:727 msgid "No Audio Input/Output" msgstr "没有音频输入/输出" #: arts.cpp:728 msgid "Advanced Linux Sound Architecture" msgstr "高级 Linux 声音架构" #: arts.cpp:729 msgid "Open Sound System" msgstr "开放声音系统" #: arts.cpp:730 msgid "Threaded Open Sound System" msgstr "线索化的声音系统" #: arts.cpp:731 msgid "Network Audio System" msgstr "网络音频系统" #: arts.cpp:732 msgid "Personal Audio Device" msgstr "个人音频设备" #: arts.cpp:733 msgid "SGI dmedia Audio I/O" msgstr "SGI dmedia 音频 I/O" #: arts.cpp:734 msgid "Sun Audio Input/Output" msgstr "Sun 音频输入/输出" #: arts.cpp:735 msgid "Portable Audio Library" msgstr "便携音频库" #: arts.cpp:736 msgid "Enlightened Sound Daemon" msgstr "增强式声音守护程序" #: arts.cpp:737 msgid "MAS Audio Input/Output" msgstr "MAS 音频输入/输出" #: arts.cpp:738 msgid "Jack Audio Connection Kit" msgstr "Jack 音频连接工具" #: generaltab.ui:35 #, no-c-format msgid "&Enable the sound system" msgstr "启用声音系统(&E)" #: generaltab.ui:41 #, no-c-format msgid "" "If this option is enabled, the sound system will be loaded on TDE startup.\n" "Recommended if you want sound." msgstr "" "如果启用这个选项，TDE 启动时将会装入声音系统。\n" "如果您需要声音，建议启用。" #: generaltab.ui:64 #, no-c-format msgid "Networked Sound" msgstr "网络声音请求" #: generaltab.ui:75 #, no-c-format msgid "" "Enable this option if you want to play sound on a remote computer or you " "want to be able to control sound on this system from another computer." msgstr "" "如果您想要在远程计算机播放声音，或者您想要从其它的计算机上控制此系统的声" "音，请启用此选项。" #: generaltab.ui:83 #, no-c-format msgid "Enable &networked sound" msgstr "启用网络声音请求(&N)" #: generaltab.ui:86 #, no-c-format msgid "" "This option allows sound requests coming in from over the network to be " "accepted, instead of just limiting the server to the local computer." msgstr "这个选项允许接受从网络上发来的声音请求，而不是仅允许本地计算机使用。" #: generaltab.ui:96 #, no-c-format msgid "Skip Prevention" msgstr "避免跳帧" #: generaltab.ui:107 #, no-c-format msgid "" "If your sound is skipping during playback, enable running with highest " "possible priority. Increasing your sound buffer might also help." msgstr "" "如果您的声音在回放的时候出现了跳帧，可以试着指定尽可能高的优先级。而增加声" "音缓冲区也可能有所帮助。" #: generaltab.ui:115 #, no-c-format msgid "&Run with the highest possible priority (realtime priority)" msgstr "以尽可能高的优先级(实时优先级)运行(&R)" #: generaltab.ui:121 #, no-c-format msgid "" "On systems which support realtime scheduling, if you have sufficient " "permissions, this option will enable a very high priority for processing " "sound requests." msgstr "" "在支持实时进程调度的系统上，如果您有足够的权限，这个选项将使音效请求的处理具" "有非常高的优先级。" #: generaltab.ui:152 #, no-c-format msgid "Sound &buffer:" msgstr "声音缓存区(&B)：" #: generaltab.ui:163 #, no-c-format msgid "" "

Huge buffer, for low-end machines, less " "skipping

" msgstr "" "

大缓存，对于底端的计算机，跳帧较少" #: generaltab.ui:173 #, no-c-format msgid "Auto-Suspend" msgstr "自动挂起" #: generaltab.ui:184 #, no-c-format msgid "" "The TDE sound system takes exclusive control over your audio hardware, " "blocking programs that may wish to use it directly. If the TDE sound system " "sits idle it can give up this exclusive control." msgstr "" "TDE 声音系统将完全接管您的音频硬件，并且将屏蔽将直接访问硬件的程序。如果 " "TDE 声音系统空闲一定时间，它才会放弃绝对控制。" #: generaltab.ui:203 #, no-c-format msgid "&Auto-suspend if idle after:" msgstr "自动挂起如果空闲(&A)：" #: generaltab.ui:209 #, no-c-format msgid "The sound server will suspend itself if idle for this period of time." msgstr "如果空闲这么长的时间，声音服务器将会挂起。" #: generaltab.ui:217 #, no-c-format msgid " seconds" msgstr " 秒" #: generaltab.ui:279 #, no-c-format msgid "Test &Sound" msgstr "测试声音(&S)" #: hardwaretab.ui:30 #, no-c-format msgid "Select && Configure your Audio Device" msgstr "选择并配置您的音频设备" #: hardwaretab.ui:57 #, no-c-format msgid "&Select the audio device:" msgstr "选择音频设备(&S)：" #: hardwaretab.ui:91 #, no-c-format msgid "&Full duplex" msgstr "全双工(&F)" #: hardwaretab.ui:97 #, no-c-format msgid "" "This enables the soundserver to record and play sound at the same time. If " "you use applications like Internet telephony, voice recognition or similar, " "you probably want this." msgstr "" "使声音服务器同时记录和播放声音。如果您使用象 Internet 电话、语音识别或类似的" "程序，您可能需要使用这个选项。" #: hardwaretab.ui:107 #, no-c-format msgid "Use other custom &options:" msgstr "使用其它定制选项(&O)：" #: hardwaretab.ui:115 #, no-c-format msgid "Override &device location:" msgstr "覆盖设备位置(&D)：" #: hardwaretab.ui:148 #, no-c-format msgid "&Quality:" msgstr "质量(&Q)：" #: hardwaretab.ui:162 #, no-c-format msgid "16 Bits (high)" msgstr "16位(高)" #: hardwaretab.ui:167 #, no-c-format msgid "8 Bits (low)" msgstr "8位(低)" #: hardwaretab.ui:206 #, no-c-format msgid "Use &custom sampling rate:" msgstr "使用自定义采样率(&C)：" #: hardwaretab.ui:233 #, no-c-format msgid " Hz " msgstr " Hz " #: hardwaretab.ui:280 #, no-c-format msgid "/dev/dsp" msgstr "/dev/dsp" #: hardwaretab.ui:290 #, no-c-format msgid "Select your MIDI Device" msgstr "选择您的 MIDI 设备" #: hardwaretab.ui:301 #, no-c-format msgid "Use MIDI ma&pper:" msgstr "使用 MIDI 映射(&P)：" #: hardwaretab.ui:309 #, no-c-format msgid "Select the &MIDI device:" msgstr "选择 &MIDI 设备：" #~ msgid "Test &MIDI" #~ msgstr "测试 &MIDI" #~ msgid "generalTab" #~ msgstr "generalTab" #~ msgid "Alt+S" #~ msgstr "Alt+S" #~ msgid "Alt+M" #~ msgstr "Alt+M" #~ msgid "hardwareTab" #~ msgstr "硬件标签" #~ msgid "Alt+O" #~ msgstr "Alt+O" #~ msgid "Alt+C" #~ msgstr "Alt+C"