# traditional Chinese translation of kcmlocale # Copyright (C) 2001-2002 Free Software Foundation, Inc. # Translator: Kenduest Lee , 2001. # Chao-Hsiung Liao , 2002. # Hydonsingore Sie msgid "" msgstr "" "Project-Id-Version: kcmlocale\n" "POT-Creation-Date: 2018-12-10 03:08+0100\n" "PO-Revision-Date: 2005-08-07 07:18+0800\n" "Last-Translator: Chao-Hsiung Liao \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Kenduest Lee,ChaoHsiung Liao,Hydonsingore Sie" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" "kenduest@cynix.com.tw,pesder@seed.net.tw,hydonsingore@mail.educities.edu.tw" #: kcmlocale.cpp:55 msgid "Country or region:" msgstr "國家或地區:" #: kcmlocale.cpp:61 msgid "Languages:" msgstr "語系:" #: kcmlocale.cpp:70 msgid "Add Language" msgstr "新增語系" #: kcmlocale.cpp:74 msgid "Remove Language" msgstr "移除語系" #: kcmlocale.cpp:75 msgid "Move Up" msgstr "上移" #: kcmlocale.cpp:76 msgid "Move Down" msgstr "下移" #: kcmlocale.cpp:107 msgid "Install New Language" msgstr "" #: kcmlocale.cpp:109 #, fuzzy msgid "Uninstall Language" msgstr "新增語系" #: kcmlocale.cpp:111 msgid "Select System Language" msgstr "" #: kcmlocale.cpp:297 msgid "Other" msgstr "其他" #: kcmlocale.cpp:305 kcmlocale.cpp:352 kcmlocale.cpp:373 msgid "without name" msgstr "沒有名稱" #: kcmlocale.cpp:465 msgid "" "This is where you live. TDE will use the defaults for this country or region." msgstr "這是您居住的地方。 TDE 將會使用這個國家或地區作為預設值。" #: kcmlocale.cpp:468 msgid "" "This will add a language to the list. If the language is already in the " "list, the old one will be moved instead." msgstr "" "這會新增一個語系至列表。如果列表上已經有這個語系，舊的語系將會被新的取代。" #: kcmlocale.cpp:472 msgid "This will remove the highlighted language from the list." msgstr "這將會移除列表上突顯的語系。" #: kcmlocale.cpp:475 msgid "" "TDE programs will be displayed in the first available language in this " "list.\n" "If none of the languages are available, US English will be used." msgstr "" "TDE 應用程式將會以列表中第一個可用的語系顯示。\n" "如果沒有可用的語系，則會使用美式英語代替。" #: kcmlocale.cpp:482 msgid "" "Here you can choose your country or region. The settings for languages, " "numbers etc. will automatically switch to the corresponding values." msgstr "" "您可以在這邊選擇您的國家或地區。語言、數字等等的設定將會自動切換成對應的數" "值。" #: kcmlocale.cpp:489 msgid "" "Here you can choose the languages that will be used by TDE. If the first " "language in the list is not available, the second will be used, etc. If only " "US English is available, no translations have been installed. You can get " "translation packages for many languages from the place you got TDE from." "

Note that some applications may not be translated to your languages; in " "this case, they will automatically fall back to US English." msgstr "" "您可以在這邊選擇 TDE 所使用的語言。如果列表中的第一個語系無法使用，會使用第二" "個語系代替，並以此類推。如果只有美式英語可用，可能是沒有安裝其他翻譯檔。您可" "以從您取得 TDE 的地方找到很多種語言的翻譯檔套件。

注意有些應用程式可能沒有" "翻譯成您的語言；在這種情形下它們會自動回復為美式英語。" #: klocalesample.cpp:52 msgid "Numbers:" msgstr "數字:" #: klocalesample.cpp:57 msgid "Money:" msgstr "金錢:" #: klocalesample.cpp:62 msgid "Date:" msgstr "日期:" #: klocalesample.cpp:67 msgid "Short date:" msgstr "短日期:" #: klocalesample.cpp:72 msgid "Time:" msgstr "時間:" #: klocalesample.cpp:112 msgid "This is how numbers will be displayed." msgstr "這是數字被顯示的方式。" #: klocalesample.cpp:116 msgid "This is how monetary values will be displayed." msgstr "這是貨幣數值顯示的方式。" #: klocalesample.cpp:120 msgid "This is how date values will be displayed." msgstr "這是日期顯示的方式。" #: klocalesample.cpp:124 msgid "This is how date values will be displayed using a short notation." msgstr "這是使用短模式時日期的顯示方式。" #: klocalesample.cpp:129 msgid "This is how the time will be displayed." msgstr "這是時間顯示的方式。" #: localemon.cpp:54 msgid "Currency symbol:" msgstr "貨幣符號:" #: localemon.cpp:61 msgid "Decimal symbol:" msgstr "小數點符號:" #: localemon.cpp:68 msgid "Thousands separator:" msgstr "千位分隔符號:" #: localemon.cpp:75 msgid "Fract digits:" msgstr "小數位數:" #: localemon.cpp:87 msgid "Positive" msgstr "正數" #: localemon.cpp:88 localemon.cpp:100 msgid "Prefix currency symbol" msgstr "貨幣前置符號" #: localemon.cpp:94 localemon.cpp:105 msgid "Sign position:" msgstr "符號位置:" #: localemon.cpp:99 msgid "Negative" msgstr "負數" #: localemon.cpp:269 msgid "Parentheses Around" msgstr "加上括號" #: localemon.cpp:270 msgid "Before Quantity Money" msgstr "在金錢數量前" #: localemon.cpp:271 msgid "After Quantity Money" msgstr "在金錢數量後" #: localemon.cpp:272 msgid "Before Money" msgstr "在金錢前" #: localemon.cpp:273 msgid "After Money" msgstr "在金錢後" #: localemon.cpp:278 msgid "" "Here you can enter your usual currency symbol, e.g. $ or DM.

Please note " "that the Euro symbol may not be available on your system, depending on the " "distribution you use." msgstr "" "您可以在這邊輸入您一般使用的貨幣符號，例如 $ 或 DM 。

請注意，歐元符號可能" "無法在您的系統上使用，這與您使用的版本有關。" #: localemon.cpp:285 msgid "" "Here you can define the decimal separator used to display monetary values." "

Note that the decimal separator used to display other numbers has to be " "defined separately (see the 'Numbers' tab)." msgstr "" "您可以在這邊定義顯示金錢數值時的小數分隔符號。

注意，用於顯示其他數字的小數" "分隔符號必須另外定義 (請參照「數字」頁)。" #: localemon.cpp:293 msgid "" "Here you can define the thousands separator used to display monetary values." "

Note that the thousands separator used to display other numbers has to be " "defined separately (see the 'Numbers' tab)." msgstr "" "您可以在這邊定義顯示金錢數值時的千分位分隔符號。

注意，用於顯示其他數字的千" "分位分隔符號必須另外設定定義 (請參照「數字」頁)。" #: localemon.cpp:301 msgid "" "This determines the number of fract digits for monetary values, i.e. the " "number of digits you find behind the decimal separator. Correct " "value is 2 for almost all people." msgstr "" "這決定了要金錢數值中顯示的小數位數，也就是您可以在小數點後面看到的位" "數。一般而言都會設為 2。" #: localemon.cpp:308 msgid "" "If this option is checked, the currency sign will be prefixed (i.e. to the " "left of the value) for all positive monetary values. If not, it will be " "postfixed (i.e. to the right)." msgstr "" "如果選擇這個選項，對所有為正數的金錢數值，貨幣符號將會被放在前面 (左邊)。否則" "便會被放在後面 (右邊)。" #: localemon.cpp:314 msgid "" "If this option is checked, the currency sign will be prefixed (i.e. to the " "left of the value) for all negative monetary values. If not, it will be " "postfixed (i.e. to the right)." msgstr "" "如果選擇這個選項，對所有為負數的金錢數值，貨幣符號將會被放在前面 (左邊)。否則" "便會被放在後面 (右邊)。" #: localemon.cpp:320 msgid "" "Here you can select how a positive sign will be positioned. This only " "affects monetary values." msgstr "您可以在這邊選擇正號要放在哪邊。這只會影響對金錢的顯示。" #: localemon.cpp:325 msgid "" "Here you can select how a negative sign will be positioned. This only " "affects monetary values." msgstr "您可以在這邊選擇負號要放在哪邊。這只會影響對金錢的顯示。" #: localenum.cpp:48 msgid "&Decimal symbol:" msgstr "小數點符號(&D):" #: localenum.cpp:54 msgid "Tho&usands separator:" msgstr "千位分隔符號(&U):" #: localenum.cpp:60 msgid "Positive si&gn:" msgstr "正數符號(&G):" #: localenum.cpp:66 msgid "&Negative sign:" msgstr "負數符號(&N):" #: localenum.cpp:165 msgid "" "Here you can define the decimal separator used to display numbers (i.e. a " "dot or a comma in most countries).

Note that the decimal separator used to " "display monetary values has to be set separately (see the 'Money' tab)." msgstr "" "您可以在這邊定義顯示數字時所使用的小數點分隔符號 (一般為點號)。

注意，用來" "顯示金錢數值的小數點分隔符號必須另外設定 (請參照「金錢」頁)。" #: localenum.cpp:174 msgid "" "Here you can define the thousands separator used to display numbers.

Note " "that the thousands separator used to display monetary values has to be set " "separately (see the 'Money' tab)." msgstr "" "您可以在這邊定義顯示數字時所使用的千分位分隔符號。

注意，用來顯示金錢數值的" "千分位分隔符號必須另外設定 (請參照「金錢」頁)。" #: localenum.cpp:182 msgid "" "Here you can specify text used to prefix positive numbers. Most people leave " "this blank." msgstr "您可以在這邊指定正數值的前置文字。一般均不使用。" #: localenum.cpp:188 msgid "" "Here you can specify text used to prefix negative numbers. This should not " "be empty, so you can distinguish positive and negative numbers. It is " "normally set to minus (-)." msgstr "" "您可以在這邊指定負數值的前置文字。這不應該是空白的，如此您才能區分正負數值。" "一般均使用減號 (-)。" #: localeother.cpp:48 msgid "Paper format:" msgstr "紙張格式:" #: localeother.cpp:55 msgid "Measure system:" msgstr "度量衡系統:" #: localeother.cpp:119 msgid "" "_: The Metric System\n" "Metric" msgstr "公制" #: localeother.cpp:121 msgid "" "_: The Imperial System\n" "Imperial" msgstr "英制" #: localeother.cpp:123 msgid "A4" msgstr "A4" #: localeother.cpp:124 msgid "US Letter" msgstr "US Letter" #: localetime.cpp:94 msgid "HH" msgstr "HH" #: localetime.cpp:95 msgid "hH" msgstr "hH" #: localetime.cpp:96 msgid "PH" msgstr "PH" #: localetime.cpp:97 msgid "pH" msgstr "pH" #: localetime.cpp:98 msgid "" "_: Minute\n" "MM" msgstr "MM" #: localetime.cpp:99 msgid "SS" msgstr "SS" #: localetime.cpp:100 msgid "AMPM" msgstr "AMPM" #: localetime.cpp:110 msgid "YYYY" msgstr "YYYY" #: localetime.cpp:111 msgid "YY" msgstr "YY" #: localetime.cpp:112 msgid "mM" msgstr "mM" #: localetime.cpp:113 msgid "" "_: Month\n" "MM" msgstr "MM" #: localetime.cpp:114 msgid "SHORTMONTH" msgstr "SHORTMONTH" #: localetime.cpp:115 msgid "MONTH" msgstr "MONTH" #: localetime.cpp:116 msgid "dD" msgstr "dD" #: localetime.cpp:117 msgid "DD" msgstr "DD" #: localetime.cpp:118 msgid "SHORTWEEKDAY" msgstr "SHORTWEEKDAY" #: localetime.cpp:119 msgid "WEEKDAY" msgstr "WEEKDAY" #: localetime.cpp:203 msgid "Calendar system:" msgstr "曆法系統" #: localetime.cpp:211 msgid "Time format:" msgstr "時間格式:" #: localetime.cpp:218 msgid "Date format:" msgstr "日期格式:" #: localetime.cpp:223 msgid "Short date format:" msgstr "短日期格式:" #: localetime.cpp:228 msgid "First day of the week:" msgstr "一週的第一天:" #: localetime.cpp:235 msgid "Use declined form of month name" msgstr "使用月份名稱的 declined 形式" #: localetime.cpp:428 msgid "" "_: some reasonable time formats for the language\n" "HH:MM:SS\n" "pH:MM:SS AMPM" msgstr "" "HH:MM:SS\n" "AMPM pH:MM:SS" #: localetime.cpp:436 msgid "" "_: some reasonable date formats for the language\n" "WEEKDAY MONTH dD YYYY\n" "SHORTWEEKDAY MONTH dD YYYY" msgstr "YYYY年 mM月 dD日 WEEKDAY" #: localetime.cpp:444 msgid "" "_: some reasonable short date formats for the language\n" "YYYY-MM-DD\n" "dD.mM.YYYY\n" "DD.MM.YYYY" msgstr "" "YYYY/MM/DD\n" "YYYY/mM/dD\n" "YY/MM/DD\n" "YY.MM.DD" #: localetime.cpp:455 msgid "" "_: Calendar System Gregorian\n" "Gregorian" msgstr "陽曆" #: localetime.cpp:457 msgid "" "_: Calendar System Hijri\n" "Hijri" msgstr "伊斯蘭曆" #: localetime.cpp:459 msgid "" "_: Calendar System Hebrew\n" "Hebrew" msgstr "希伯來曆" #: localetime.cpp:461 msgid "" "_: Calendar System Jalali\n" "Jalali" msgstr "Jalali" #: localetime.cpp:464 msgid "" "

The text in this textbox will be used to format time strings. The " "sequences below will be replaced:

HHThe " "hour as a decimal number using a 24-hour clock (00-23).
hHThe hour (24-hour clock) as a decimal number " "(0-23).
PHThe hour as a decimal number " "using a 12-hour clock (01-12).
pHThe hour " "(12-hour clock) as a decimal number (1-12).
MMThe minutes as a decimal number (00-59).
SSThe seconds as a decimal number (00-59).
AMPMEither \"am\" or \"pm\" according to the given time value. Noon " "is treated as \"pm\" and midnight as \"am\".
" msgstr "" "

這個文字方塊中的文字是用於指定時間字串的。下面的串列將會被置換：
HH使用二位數的24小時制顯示 (00-23)。
hH使用24小時制顯示 (0-23)。
PH使用二位數的12小時制顯示 (01-12)。
pH使用12小時制顯示 (1-12)。
MM使用二位數顯示分 (00-59)。
SS使用二位數顯示秒 (00-59)。
AMPM給定「上午」或「下午」。中午被當作「下午」，而" "午夜當作「早上」處理。
" #: localetime.cpp:487 msgid "" "
YYYYThe year with century as a decimal number." "
YYThe year without century as a decimal " "number (00-99).
MMThe month as a decimal " "number (01-12).
mMThe month as a decimal " "number (1-12).
SHORTMONTHThe first three " "characters of the month name.
MONTHThe " "full month name.
DDThe day of month as a " "decimal number (01-31).
dDThe day of month " "as a decimal number (1-31).
SHORTWEEKDAYThe " "first three characters of the weekday name.
WEEKDAYThe full weekday name.
" msgstr "" "" #: localetime.cpp:508 msgid "" "

The text in this textbox will be used to format long dates. The sequences " "below will be replaced:

" msgstr "" "

這個文字方塊中的文字用以顯示長格式的日期。下面的串列將會被取代：

" #: localetime.cpp:514 msgid "" "

The text in this textbox will be used to format short dates. For " "instance, this is used when listing files. The sequences below will be " "replaced:

" msgstr "" "

這個文字方塊中的文字用以顯示短格式的日期。一般在列出檔案時使用。下面的串列" "將會被取代：

" #: localetime.cpp:521 msgid "" "

This option determines which day will be considered as the first one of " "the week.

" msgstr "

這個選擇決定了那一天會被認為是一週的第一天。

" #: localetime.cpp:528 msgid "" "

This option determines whether possessive form of month names should be " "used in dates.

" msgstr "

這個選擇決定了在日期中是否使用月名稱的所有格。

" #: toplevel.cpp:53 msgid "KCMLocale" msgstr "KCM地區" #: toplevel.cpp:55 msgid "Regional settings" msgstr "區域設定" #: toplevel.cpp:178 msgid "" "Changed language settings apply only to newly started applications.\n" "To change the language of all programs, you will have to logout first." msgstr "" "改變語系設定只會影響到新開啟的應用程式。\n" "要改變所有程式的語系，必須先登出。" #: toplevel.cpp:182 msgid "Applying Language Settings" msgstr "套用語系設定" #: toplevel.cpp:233 msgid "" "

Country/Region & Language

\n" "

From here you can configure language, numeric, and time \n" "settings for your particular region. In most cases it will be \n" "sufficient to choose the country you live in. For instance TDE \n" "will automatically choose \"German\" as language if you choose \n" "\"Germany\" from the list. It will also change the time format \n" "to use 24 hours and and use comma as decimal separator.

\n" msgstr "" "

國家/地區 & 語言

\n" "

您可以在這邊設定您所在區域的\n" "語言、數字和時刻。在大多數的狀況下\n" "您只要選擇您所居住的國家就夠了。\n" "舉例而言，當您從列表中選擇「德國」時，\n" "TDE 會自動選擇「德文」為您的語言。同時\n" "也會使用24小時制並且以逗點為小數點。

\n" #: toplevel.cpp:277 msgid "Examples" msgstr "範例" #: toplevel.cpp:278 msgid "&Locale" msgstr "地區(&L)" #: toplevel.cpp:279 msgid "&Numbers" msgstr "數字(&N)" #: toplevel.cpp:280 msgid "&Money" msgstr "金錢(&M)" #: toplevel.cpp:281 msgid "&Time && Dates" msgstr "時間與日期(&T)" #: toplevel.cpp:282 msgid "&Other" msgstr "其他(&O)"
YYYY含世紀數值的年份。
YY不含世紀數值的年份 (00-99)。
MM使用二位數顯示月份 (01-12)。
mM使用數字顯示月份 (1-12)。
SHORTMONTH使用月份名稱的前三個字元顯示月份。
MONTH使用完整月份名稱顯示月份。
DD使用二位數字顯示每月日數 (01-31)。
dD使用數字顯示每月日數 (1-31)。
SHORTWEEKDAY使用星期名稱的前三個字元顯示星期。
WEEKDAY使用完整星期名稱顯示星期。