# translation of libtaskbar.po to Chinese Traditional
# Copyright (C) 2002, 2005, 2006, 2007 Free Software Foundation, Inc.
#
# Yuan-Chen Cheng <ycheng@slat.org>, 2002.
# Frank Weng <franklin at goodhorse dot idv dot tw>, 2005.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: libtaskbar\n"
"POT-Creation-Date: 2008-08-18 01:16+0200\n"
"PO-Revision-Date: 2007-02-27 09:12+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. i18n: file taskbar.kcfg line 11
#: rc.cpp:3
#, no-c-format
msgid "Show windows from all desktops"
msgstr "顯示所有桌面的視窗"

#. i18n: file taskbar.kcfg line 12
#: rc.cpp:6
#, no-c-format
msgid ""
"Turning this option off will cause the taskbar to display <b>only</b> "
"the windows on the current desktop. \\n\\nBy default, this option is selected "
"and all windows are shown."
msgstr ""
"關掉這個選項會讓工作列<b>只</b>顯示目前桌面上的視窗。\\n\\n預設為開啟，也就是會顯示所有的視窗。"

#. i18n: file taskbar.kcfg line 16
#: rc.cpp:9
#, no-c-format
msgid "Show only minimized windows"
msgstr "只顯示最小化的視窗"

#. i18n: file taskbar.kcfg line 17
#: rc.cpp:12
#, no-c-format
msgid ""
"Select this option if you want the taskbar to display <b>only</b> "
"minimized windows. \\n\\nBy default, this option is not selected and the "
"taskbar will show all windows."
msgstr ""
"選擇這個選項會讓工作列<b>只</b>顯示最小化的視窗。\\n\\n預設是關閉的，也就是會顯示所有的視窗。"

#. i18n: file taskbar.kcfg line 22
#: rc.cpp:15
#, no-c-format
msgid "Never"
msgstr "從不"

#. i18n: file taskbar.kcfg line 25
#: rc.cpp:18
#, no-c-format
msgid "When Taskbar Full"
msgstr "當工作列滿了"

#. i18n: file taskbar.kcfg line 28
#: rc.cpp:21
#, no-c-format
msgid "Always"
msgstr "總是"

#. i18n: file taskbar.kcfg line 32
#: rc.cpp:24
#, no-c-format
msgid "Group similar tasks:"
msgstr "將類似的視窗歸類成群組："

#. i18n: file taskbar.kcfg line 33
#: rc.cpp:27
#, no-c-format
msgid ""
"The taskbar can group similar windows into single buttons. When one of these "
"window group buttons are clicked on a menu appears showing all the windows in "
"that group. This can be especially useful with the <em>Show all windows</em> "
"option.\\n\\nYou can set the taskbar to <strong>Never</strong> "
"group windows, to <strong>Always</strong> group windows or to group windows "
"only <strong>When the Taskbar is Full</strong>.\\n\\nBy default the taskbar "
"groups windows when it is full."
msgstr ""
"工作列可以將類似的視窗歸類成一個群組，並提供一個按鍵。當按下群組按鍵時，會出現一個選單選擇您要用的視窗。這在您打開<em>顯示所有視窗</em>"
"時特別好用。\\n\\n您也可以將工作列設定成<strong>從不</strong>這樣做，或是<strong>總是</strong>"
"這樣做，或是<strong>當工作列滿了</strong>才這樣做。\\n\\n預設為工作列滿了之後才歸類成群組。"

#. i18n: file taskbar.kcfg line 37
#: rc.cpp:30
#, no-c-format
msgid "Sort windows by desktop"
msgstr "依桌面排序視窗"

#. i18n: file taskbar.kcfg line 38
#: rc.cpp:33
#, no-c-format
msgid ""
"Selecting this option causes the taskbar to show windows in order of the "
"desktop they appear on.\\n\\nBy default this option is selected."
msgstr ""
"選擇這個選項，工作列會依桌面排序視窗。\\n\\n預設是開啟。"

#. i18n: file taskbar.kcfg line 42
#: rc.cpp:36
#, no-c-format
msgid "Sort windows by application"
msgstr "依應用程式排序視窗"

#. i18n: file taskbar.kcfg line 43
#: rc.cpp:39
#, no-c-format
msgid ""
"Selecting this option causes the taskbar to show windows ordered by "
"application.\\n\\nBy default this option is selected."
msgstr ""
"選擇這個選項，工作列會依應用程式排序視窗。\\n\\n預設是開啟。"

#. i18n: file taskbar.kcfg line 47
#: rc.cpp:42
#, no-c-format
msgid "Show application icons"
msgstr "顯示應用程式圖示"

#. i18n: file taskbar.kcfg line 48
#: rc.cpp:45
#, no-c-format
msgid ""
"Select this option if you want window icons to appear along with their titles "
"in the taskbar.\\n\\nBy default this option is selected."
msgstr ""
"如果您要在工作列前面顯示應用成式的圖示，就可以打開這個選項。\\n\\n預設是開啟。"

#. i18n: file taskbar.kcfg line 64
#: rc.cpp:48
#, no-c-format
msgid "Show windows from all screens"
msgstr "顯示所有螢募的視窗"

#. i18n: file taskbar.kcfg line 65
#: rc.cpp:51
#, no-c-format
msgid ""
"Turning this option off will cause the taskbar to display <b>only</b> "
"windows which are on the same Xinerama screen as the taskbar.\\n\\nBy default, "
"this option is selected and all windows are shown."
msgstr ""
"關掉這個選項，工作列就<b>只</b>會顯示同一個 Xinerama 螢幕內的視窗。\\n\\n預設是開啟，也就是會顯示所有的視窗。"

#. i18n: file taskbar.kcfg line 74
#: rc.cpp:54
#, no-c-format
msgid "Show window list button"
msgstr "顯示視窗列表按鈕"

#. i18n: file taskbar.kcfg line 75
#: rc.cpp:57
#, no-c-format
msgid ""
"Selecting this option causes the taskbar to display a button that, when "
"clicked, shows a list of all windows in a popup menu."
msgstr "選擇這個選項的話，工具列上會有一個按鈕，按下去後會出現所有視窗的列表選單。"

#. i18n: file taskbar.kcfg line 87
#: rc.cpp:60
#, no-c-format
msgid "Show Task List"
msgstr "顯示工作列表"

#. i18n: file taskbar.kcfg line 90
#: rc.cpp:63
#, no-c-format
msgid "Show Operations Menu"
msgstr "顯示操作目錄"

#. i18n: file taskbar.kcfg line 93
#: rc.cpp:66
#, no-c-format
msgid "Activate, Raise or Minimize Task"
msgstr "使用、叫出或最小化工作"

#. i18n: file taskbar.kcfg line 96
#: rc.cpp:69
#, no-c-format
msgid "Activate Task"
msgstr "使用此工作"

#. i18n: file taskbar.kcfg line 99
#: rc.cpp:72
#, no-c-format
msgid "Raise Task"
msgstr "叫出此工作"

#. i18n: file taskbar.kcfg line 102
#: rc.cpp:75
#, no-c-format
msgid "Lower Task"
msgstr "降低此工作"

#. i18n: file taskbar.kcfg line 105
#: rc.cpp:78
#, no-c-format
msgid "Minimize Task"
msgstr "最小化此工作"

#. i18n: file taskbar.kcfg line 108
#: rc.cpp:81
#, no-c-format
msgid "Move To Current Desktop"
msgstr "移到目前的桌面"

#. i18n: file taskbar.kcfg line 111
#: rc.cpp:84
#, no-c-format
msgid "Close Task"
msgstr "關閉工作"

#. i18n: file taskbar.kcfg line 117
#: rc.cpp:87
#, no-c-format
msgid "Mouse button actions"
msgstr "滑鼠按鈕動作"

#. i18n: file taskbar.kcfg line 125
#: rc.cpp:90
#, no-c-format
msgid ""
"The number of times to blink a taskbar button when a window asks for attention. "
"Setting this to 1000 or greater causes the button to blink forever."
msgstr "當視窗要求使用者注意時，要閃爍工作列的按鍵幾次。設定 1000 次以上表示不停止。"

#. i18n: file taskbar.kcfg line 130
#: rc.cpp:93
#, no-c-format
msgid "Draw taskbar entries \"flat\" and not as a button"
msgstr "不要用按鈕顯示工作列上的項目"

#. i18n: file taskbar.kcfg line 131
#: rc.cpp:96
#, no-c-format
msgid ""
"Turning this option on will cause the taskbar to draw visible button frames for "
"each entry in the taskbar. \\n\\nBy default, this option is off."
msgstr ""
"打開這個選項的話，工作列上就不會用按鈕來顯示視窗與工作。\\n\\n預設為關閉。"

#. i18n: file taskbar.kcfg line 135
#: rc.cpp:99
#, no-c-format
msgid "Draw taskbar text with a halo around it"
msgstr "將工具列上的文字加上外環"

#. i18n: file taskbar.kcfg line 136
#: rc.cpp:102
#, no-c-format
msgid ""
"Turning this option on will cause the taskbar to draw fancier text that has an "
"outline around it. While this is useful for transparent panels or particularly "
"dark panel backgrounds, it is slower."
msgstr "打開這個選項的話，工具列上的文字會以較花俏的方式顯現，外面會有一圈外環。這對透明的面板，或是較暗的面板來說特別有用，但是會變比較慢。"

#. i18n: file taskbar.kcfg line 140
#: rc.cpp:105
#, no-c-format
msgid "Show a visible button frame on the task the cursor is positioned over"
msgstr "在游標指向的工作顯示按鍵外框"

#. i18n: file taskbar.kcfg line 144
#: rc.cpp:108
#, no-c-format
msgid "Show thumbnails instead of icons in the mouse-over effects"
msgstr "在滑鼠位置顯示極小的視窗而不使用圖示"

#. i18n: file taskbar.kcfg line 145
#: rc.cpp:111
#, no-c-format
msgid ""
"Enabling this option will draw a thumbnail of the window in its mouse-over "
"effect."
"<p>If a window is minimized or resides on a different desktop while the taskbar "
"is starting, an icon is shown until the window is restored or the appropriate "
"desktop is activated, respectively.</p>"
msgstr ""
"開啟這個選項，在滑鼠位置上會顯示極小的視窗。 "
"<p>如果視窗已經最小化，或是在另一個桌面的話，就會使用圖示，直到切到該桌面或是叫出此視窗。</p>"

#. i18n: file taskbar.kcfg line 149
#: rc.cpp:114
#, no-c-format
msgid "Maximum width/height of the thumbnail in pixels"
msgstr "極小視窗的寬與高值（以像素表示）"

#. i18n: file taskbar.kcfg line 150
#: rc.cpp:117
#, no-c-format
msgid ""
"A thumbnail is created by resizing the window. The scaling factor is determined "
"by its largest dimension and this value. In doing so, the thumbnail's size will "
"not exceed this value in any dimension."
msgstr ""
"極小視窗其實是把視窗重新調整大小，調整的比例是由最大的維度(dimension)與此值來決定。設定此值，則極小視窗大小不會在任一維度超過這個值。"

#. i18n: file taskbar.kcfg line 154
#: rc.cpp:120
#, no-c-format
msgid "Use custom colors for taskbar buttons text and background"
msgstr "工作列上的按鈕文字與背景使用自訂的顏色"

#. i18n: file taskbar.kcfg line 155
#: rc.cpp:123
#, no-c-format
msgid ""
"Turning this option on will allow choosing your own colors for taskbar buttons "
"text and background."
msgstr "開啟這個選項的話，您可以選擇在工作列上按鈕的文字顏色，以及其背景顏色。"

#. i18n: file taskbar.kcfg line 158
#: rc.cpp:126
#, no-c-format
msgid "Color to use for active task button text"
msgstr "要用於活動中工作按鈕的文字顏色"

#. i18n: file taskbar.kcfg line 160
#: rc.cpp:129
#, no-c-format
msgid ""
"This color is used for displaying text on taskbar button for task which is "
"active at the moment."
msgstr "這個顏色會用於目前活動中工作按鈕上的文字。"

#. i18n: file taskbar.kcfg line 163
#: rc.cpp:132
#, no-c-format
msgid "Color to use for inactive tasks button text"
msgstr "要用於未活動工作按鈕的文字顏色"

#. i18n: file taskbar.kcfg line 165
#: rc.cpp:135
#, no-c-format
msgid ""
"This color is used for displaying text on taskbar button for tasks other than "
"active."
msgstr "這個顏色會用於目前未活動中工作按鈕上的文字。"

#. i18n: file taskbar.kcfg line 168
#: rc.cpp:138
#, no-c-format
msgid "Color to use for taskbar buttons background"
msgstr "要用於工作按鈕的背景顏色"

#. i18n: file taskbar.kcfg line 170
#: rc.cpp:141
#, no-c-format
msgid "This color is used for displaying background of taskbar buttons."
msgstr "這個顏色會用於目前工作按鈕的背景。"

#: taskbarbindings.cpp:33
msgid "Next Taskbar Entry"
msgstr "下一個工作列上的項目"

#: taskbarbindings.cpp:34
msgid "Previous Taskbar Entry"
msgstr "前一個工作列上的項目"

#: taskcontainer.cpp:623 taskcontainer.cpp:1600
msgid "modified"
msgstr "已修改"

#: taskcontainer.cpp:1517
msgid "Loading application ..."
msgstr "載入應用程式中..."

#: taskcontainer.cpp:1581
msgid "On all desktops"
msgstr "在所有的桌面上"

#: taskcontainer.cpp:1586
#, c-format
msgid "On %1"
msgstr "在 %1 上"

#: taskcontainer.cpp:1592
msgid "Requesting attention"
msgstr "要求注意"

#: taskcontainer.cpp:1598
msgid "Has unsaved changes"
msgstr "有未儲存的改變"