# translation of tdeprint.po to Chinese Traditional # Copyright (C) 2001, 2002, 2006 Free Software Foundation, Inc. # # with reference from zh_CN translation (as of 2002-11-08) # Chih-Wei Huang , 2001. # Kenduest Lee , 2001, 2002. # Jouston Huang (Huang, Jiun-Jeng) , 2002. # Wang Jian , 2002. # Anthony Fok , 2002. # Yuan-Chen Cheng , 2002. # Frank Weng (a.k.a. Franklin) , 2006. msgid "" msgstr "" "Project-Id-Version: tdeprint\n" "POT-Creation-Date: 2020-05-13 22:01+0200\n" "PO-Revision-Date: 2006-12-18 13:08+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" #: cups/cupsaddsmb2.cpp:56 cups/cupsaddsmb2.cpp:364 msgid "&Export" msgstr "匯出(&E)" #: cups/cupsaddsmb2.cpp:62 msgid "Export Printer Driver to Windows Clients" msgstr "將印表機驅動程式開放分享給 Windows 端" #: cups/cupsaddsmb2.cpp:73 msgid "&Username:" msgstr "使用者名稱(&U)：" #: cups/cupsaddsmb2.cpp:74 msgid "&Samba server:" msgstr "Samba 伺服器(&S)：" #: cups/cupsaddsmb2.cpp:75 management/kmwpassword.cpp:50 msgid "&Password:" msgstr "密碼(&P)：" #: cups/cupsaddsmb2.cpp:80 msgid "" "

Samba server

Adobe Windows PostScript driver files plus the " "CUPS printer PPD will be exported to the [print$] special share of " "the Samba server (to change the source CUPS server, use the " "Configure Manager -> CUPS server first). The [print" "$] share must exist on the Samba side prior to clicking the Export button below." msgstr "" "

Samba 伺服器

Adobe Windows PostScript 驅動程式檔案及 CUPS 印表" "機 PPD 檔會匯出到 Samba 伺服器設定檔中的 [print$] 這個特殊共享資源" "內。在按下「匯出」鍵之前，您必須先確認 [print$] 這個共享資源已經在 " "Samba 伺服器設定檔中正確地設定完成。" #: cups/cupsaddsmb2.cpp:89 msgid "" "

Samba username

User needs to have write access to the [print" "$] share on the Samba server. [print$] holds printer drivers " "prepared for download to Windows clients. This dialog does not work for " "Samba servers configured with security = share (but works fine with " "security = user)." msgstr "" "

Samba 使用者名稱

設定使用者必須對 [print$] 有寫入的權" "限。[print$] 中有提供給 Windows 客戶端下載的印表機驅動程式。這個對話" "框在 Samba 伺服器設定為 security=share 時不會發生作用，但是在 " "security=user 則可以運作得很好。" #: cups/cupsaddsmb2.cpp:97 msgid "" "

Samba password

The Samba setting encrypt passwords = yes (default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" "

Samba 密碼

若是 Samba 伺服器設定為 encrypt passwords=yes，則您需要先使用 smbpasswd -a [username] 這個指令來產生加密過的 " "Samba 密碼。" #: cups/cupsaddsmb2.cpp:268 #, c-format msgid "Creating folder %1" msgstr "正在建立目錄 %1" #: cups/cupsaddsmb2.cpp:276 #, c-format msgid "Uploading %1" msgstr "正在上傳 %1" #: cups/cupsaddsmb2.cpp:284 #, c-format msgid "Installing driver for %1" msgstr "正在安裝 %1 的驅動程式" #: cups/cupsaddsmb2.cpp:292 #, c-format msgid "Installing printer %1" msgstr "正在安裝印表機 %1" #: cups/cupsaddsmb2.cpp:334 msgid "Driver successfully exported." msgstr "驅動程式已經成功的匯出。" #: cups/cupsaddsmb2.cpp:344 msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb manual page " "for detailed information, you need CUPS " "version 1.1.11 or higher). You may want to try again with another login/" "password." msgstr "" "操作失敗。可能的原因是：沒有權限或無效的 Samba 設定 (詳見 cupsaddsmb手冊，您需要 CUPS 版本 1.1.11 或更高)。您可以使用其他登入帳號/密碼再次嘗試連線。" #: cups/cupsaddsmb2.cpp:353 msgid "Operation aborted (process killed)." msgstr "作業失敗 (程式被終結)。" #: cups/cupsaddsmb2.cpp:359 msgid "

Operation failed.

%1

" msgstr "

作業失敗！

%1

" #: cups/cupsaddsmb2.cpp:374 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " "clients through Samba. This operation requires the Adobe PostScript Driver, a " "recent version of Samba 2.2.x and a running SMB service on the target " "server. Click Export to start the operation. Read the cupsaddsmb manual page in Konqueror or type man " "cupsaddsmb in a console window to learn more about this functionality." msgstr "" "您打算要要透過 Samba 分享出 %1 驅動程式給 Windows 的用戶端電腦。該作業" "方式需要配合 Adobe PostScript 驅動程式，以及 Samba 2.2.x 以上的版本，另外伺服器上" "還要執行 SMB 服務，才能夠正常使用。請點選 匯出 開始作業。詳細資訊請參" "考 man cupsaddsmb。" #: cups/cupsaddsmb2.cpp:394 msgid "" "Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need CUPS version 1.1.11 or higher)." msgstr "" "找不到某些驅動程式的檔案。您可以由 Adobe 網站取得所需要的檔案。另外請參考 cupsaddsmbmanual page 取得更多資訊 (您還需要配合 CUPS 1.11.11 或更高的版本)。" #: cups/cupsaddsmb2.cpp:405 #, c-format msgid "Preparing to upload driver to host %1" msgstr "正在準備把驅動程式上傳到主機 %1" #: cups/cupsaddsmb2.cpp:410 management/networkscanner.cpp:149 msgid "&Abort" msgstr "中止(&A)" #: cups/cupsaddsmb2.cpp:416 msgid "The driver for printer %1 could not be found." msgstr "找不到 %1 的印表機驅動程式。" #: cups/cupsaddsmb2.cpp:456 #, c-format msgid "Preparing to install driver on host %1" msgstr "正在準備在主機 %1 上安裝驅動程式" #: cups/ippreportdlg.cpp:34 msgid "IPP Report" msgstr "IPP 報告" #: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 msgid "&Print" msgstr "列印(&P)" #: cups/ippreportdlg.cpp:93 msgid "Internal error: unable to generate HTML report." msgstr "內部錯誤： 無法生成 HTML 報表。" #: cups/ipprequest.cpp:164 msgid "You don't have access to the requested resource." msgstr "您沒有權限存取需要的資源。" #: cups/ipprequest.cpp:167 msgid "You are not authorized to access the requested resource." msgstr "您未獲授權去存取需要的資源。" #: cups/ipprequest.cpp:170 msgid "The requested operation cannot be completed." msgstr "要求的作業無法完成。" #: cups/ipprequest.cpp:173 msgid "The requested service is currently unavailable." msgstr "要求的服務無法執行。" #: cups/ipprequest.cpp:176 msgid "The target printer is not accepting print jobs." msgstr "目標印表機不接受列印工作。" #: cups/ipprequest.cpp:313 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running." msgstr "連線到 CUPS 伺服器失敗。請檢查 CUPS 服務主機有正確安裝與執行中。" #: cups/ipprequest.cpp:316 msgid "The IPP request failed for an unknown reason." msgstr "IPP 存取失敗，原因不明。" #: cups/ipprequest.cpp:461 msgid "Attribute" msgstr "屬性" #: cups/ipprequest.cpp:462 msgid "Values" msgstr "值" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "True" msgstr "真" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "False" msgstr "假" #: cups/kmconfigcups.cpp:32 msgid "CUPS Server" msgstr "CUPS 伺服器" #: cups/kmconfigcups.cpp:33 msgid "CUPS Server Settings" msgstr "CUPS 伺服器設定" #: cups/kmconfigcupsdir.cpp:34 msgid "Folder" msgstr "資料夾" #: cups/kmconfigcupsdir.cpp:35 msgid "CUPS Folder Settings" msgstr "CUPS 資料夾設定" #: cups/kmconfigcupsdir.cpp:38 msgid "Installation Folder" msgstr "安裝資料夾" #: cups/kmconfigcupsdir.cpp:41 msgid "Standard installation (/)" msgstr "標準安裝 (/)" #: cups/kmcupsconfigwidget.cpp:65 msgid "Server Information" msgstr "伺服器資訊" #: cups/kmcupsconfigwidget.cpp:66 msgid "Account Information" msgstr "帳號資訊" #: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 msgid "&Host:" msgstr "主機(&H)：" #: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 #: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 msgid "&Port:" msgstr "埠(&P)：" #: cups/kmcupsconfigwidget.cpp:75 msgid "&User:" msgstr "使用者(&U)：" #: cups/kmcupsconfigwidget.cpp:76 msgid "Pass&word:" msgstr "密碼(&W)：" #: cups/kmcupsconfigwidget.cpp:79 msgid "&Store password in configuration file" msgstr "在設定檔中儲存密碼(&S)" #: cups/kmcupsconfigwidget.cpp:81 msgid "Use &anonymous access" msgstr "使用匿名存取(&A)" #: cups/kmcupsjobmanager.cpp:349 msgid "Job Report" msgstr "工作報告" #: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456 msgid "Unable to retrieve job information: " msgstr "無法街收到列印工作資訊。" #: cups/kmcupsjobmanager.cpp:360 msgid "&Job IPP Report" msgstr "工作 IPP 報告(&J)" #: cups/kmcupsjobmanager.cpp:362 msgid "&Increase Priority" msgstr "提高優先級(&I)" #: cups/kmcupsjobmanager.cpp:364 msgid "&Decrease Priority" msgstr "降低優先級(&D)" #: cups/kmcupsjobmanager.cpp:366 msgid "&Edit Attributes..." msgstr "編輯屬性(&E)..." #: cups/kmcupsjobmanager.cpp:419 msgid "Unable to change job priority: " msgstr "無法更改工作優先級： " #: cups/kmcupsjobmanager.cpp:477 #, c-format msgid "Unable to find printer %1." msgstr "找不到印表機 %1。" #: cups/kmcupsjobmanager.cpp:494 msgid "Attributes of Job %1@%2 (%3)" msgstr "列印工作 %1@%2 (%3) 的屬性" #: cups/kmcupsjobmanager.cpp:516 msgid "Unable to set job attributes: " msgstr "無法設定列印工作屬性： " #: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" "在 PATH 中無法找到可執行的 foomatic-datafile。請檢查是否正確安裝了Foomatic 套" "件程式。" #: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." msgstr "" "無法建立 Foomatic 驅動程式 [%1,%2]。可能是該驅動程式存在，或者是您沒有權限來" "執行此操作。" #: cups/kmcupsmanager.cpp:840 msgid "Library cupsdconf not found. Check your installation." msgstr "找不到 cupsdconf 函式庫。請檢查您的安裝是否正確。" #: cups/kmcupsmanager.cpp:846 msgid "Symbol %1 not found in cupsdconf library." msgstr "在 cupsdconf 函式庫中找不到 %1 符號。" #: cups/kmcupsmanager.cpp:941 msgid "&Export Driver..." msgstr "匯出驅動程式(&E)..." #: cups/kmcupsmanager.cpp:943 msgid "&Printer IPP Report" msgstr "印表機 IPP 報告(&P)" #: cups/kmcupsmanager.cpp:994 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "%1 的 IPP 報告" #: cups/kmcupsmanager.cpp:998 msgid "Unable to retrieve printer information. Error received:" msgstr "無法接收印表機資訊。錯誤傳回：" #: cups/kmcupsmanager.cpp:1011 msgid "Server" msgstr "伺服器" #: cups/kmcupsmanager.cpp:1051 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %1." msgstr "" "連線到 CUPS 伺服器失敗。請檢查 CUPS 服務主機是否安裝正確並正在執行中。錯誤： " "%1。" #: cups/kmcupsmanager.cpp:1052 msgid "the IPP request failed for an unknown reason" msgstr "IPP 要求失敗，原因不明。" #: cups/kmcupsmanager.cpp:1086 msgid "connection refused" msgstr "拒絕連線" #: cups/kmcupsmanager.cpp:1089 msgid "host not found" msgstr "找不到主機" #: cups/kmcupsmanager.cpp:1093 msgid "read failed (%1)" msgstr "讀取失敗（%1）" #: cups/kmcupsmanager.cpp:1097 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %2: %1." msgstr "" "連線到 CUPS 伺服器失敗。請檢查 CUPS 服務主機是否安裝正確並正在執行中。錯誤： " "%2: %1。" #: cups/kmcupsuimanager.cpp:87 msgid "" "

Print queue on remote CUPS server

Use this for a print queue " "installed on a remote machine running a CUPS server. This allows to use " "remote printers when CUPS browsing is turned off.

" msgstr "" "

遠端 CUPS 伺服器

使用安裝在遠端 CUPS 伺服器上的印表佇列。" #: cups/kmcupsuimanager.cpp:94 msgid "" "

Network IPP printer

Use this for a network-enabled printer " "using the IPP protocol. Modern high-end printers can use this mode. Use this " "mode instead of TCP if your printer can do both.

" msgstr "" "

網路 IPP 印表機

使用支援 IPP 通訊協定的網路印表機。最新的高檔" "的印表機通常都支援 IPP 通訊協定。如果印表機同時支援 TCP 與 IPP 兩種模式的話，" "請選擇 IPP。

" #: cups/kmcupsuimanager.cpp:101 msgid "" "

Fax/Modem printer

Use this for a fax/modem printer. This " "requires the installation of the fax4CUPS backend. Documents sent on this printer will be " "faxed to the given target fax number.

" msgstr "" "

傳真/數據機印表機

使用有傳真與數據機功能的印表機。這會需要安" "裝 fax4CUPS 後端介面。送" "到這個印表機的文件會被傳真出去。

" #: cups/kmcupsuimanager.cpp:108 msgid "" "

Other printer

Use this for any printer type. To use this " "option, you must know the URI of the printer you want to install. Refer to " "the CUPS documentation for more information about the printer URI. This " "option is mainly useful for printer types using 3rd party backends not " "covered by the other possibilities.

" msgstr "" "

其他印表機

其他任何型態的印表機。要使用這個選項，您必須知道印" "表機的 URI。關於印表機的 URI 請參考 CUPS 的說明文件。這個選項主要是給使用第三" "者(3rd party)提供的後端介面的印表機使用。

" #: cups/kmcupsuimanager.cpp:116 msgid "" "

Class of printers

Use this to create a class of printers. When " "sending a document to a class, the document is actually sent to the first " "available (idle) printer in the class. Refer to the CUPS documentation for " "more information about class of printers.

" msgstr "" "

印表機類別

用這個來產生印表機類別。當一份文件送到某一個類別" "時，它實際上會被送到這個類別第一個可用（閒置中）的印表機去。關於印表機類別請" "參考 CUPS 的說明文件。

" #: cups/kmcupsuimanager.cpp:129 msgid "Re&mote CUPS server (IPP/HTTP)" msgstr "遠端 CUPS 伺服器 [IPP/HTTP](&M)" #: cups/kmcupsuimanager.cpp:130 msgid "Network printer w/&IPP (IPP/HTTP)" msgstr "網路 IPP 印表機 [IPP/HTTP](&I)" #: cups/kmcupsuimanager.cpp:131 msgid "S&erial Fax/Modem printer" msgstr "傳真/數據機印表機(&E)" #: cups/kmcupsuimanager.cpp:132 msgid "Other &printer type" msgstr "其他印表機(&P)" #: cups/kmcupsuimanager.cpp:134 msgid "Cl&ass of printers" msgstr "印表機類別(&A)" #: cups/kmcupsuimanager.cpp:190 msgid "An error occurred while retrieving the list of available backends:" msgstr "接收可用的後端介面時發生錯誤：" #: cups/kmcupsuimanager.cpp:236 msgid "Priority" msgstr "優先等級" #: cups/kmcupsuimanager.cpp:238 msgid "Billing Information" msgstr "收費資訊" #: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 msgid "&Starting banner:" msgstr "文件前旗幟(&S)：" #: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 msgid "&Ending banner:" msgstr "文件底旗幟(&E)：" #: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 msgid "Banners" msgstr "旗幟" #: cups/kmpropbanners.cpp:50 msgid "Banner Settings" msgstr "旗幟設定" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" msgstr "期間(&P)：" #: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 msgid "&Size limit (KB):" msgstr "大小限制(&S) (KB)：" #: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 msgid "&Page limit:" msgstr "頁數限制(&P)：" #: cups/kmpropquota.cpp:57 msgid "Quotas" msgstr "限額" #: cups/kmpropquota.cpp:58 msgid "Quota Settings" msgstr "限額設定" #: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 msgid "No quota" msgstr "沒有限額" #: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 #: cups/kmwquota.cpp:90 msgid "None" msgstr "無" #: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 msgid "Users" msgstr "使用者" #: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 msgid "Users Access Settings" msgstr "使用者存取設定" #: cups/kmpropusers.cpp:55 msgid "Denied users" msgstr "拒絕的使用者" #: cups/kmpropusers.cpp:62 msgid "Allowed users" msgstr "允許的使用者" #: cups/kmpropusers.cpp:76 msgid "All users allowed" msgstr "所有使用者允許" #: cups/kmwbanners.cpp:57 msgid "No Banner" msgstr "無旗幟" #: cups/kmwbanners.cpp:58 msgid "Classified" msgstr "機密等級" #: cups/kmwbanners.cpp:59 msgid "Confidential" msgstr "機密" #: cups/kmwbanners.cpp:60 msgid "Secret" msgstr "密件" #: cups/kmwbanners.cpp:61 msgid "Standard" msgstr "標準" #: cups/kmwbanners.cpp:62 msgid "Top Secret" msgstr "最高機密" #: cups/kmwbanners.cpp:63 msgid "Unclassified" msgstr "無機密等級" #: cups/kmwbanners.cpp:86 msgid "Banner Selection" msgstr "旗幟選擇" #: cups/kmwbanners.cpp:99 msgid "" "

Select the default banners associated with this printer. These banners " "will be inserted before and/or after each print job sent to the printer. If " "you don't want to use banners, select No Banner.

" msgstr "" "

選擇對應這個印表機的預設旗幟。這些旗幟將被插入到送往該印表機的每項列印工作" "的前面和/或後面。如果您不想使用旗幟，請選擇 無旗幟。

" #: cups/kmwfax.cpp:39 msgid "Fax Serial Device" msgstr "串列埠傳真裝置" #: cups/kmwfax.cpp:43 msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "

選擇您的傳真/數據機連接的串列埠裝置。

" #: cups/kmwfax.cpp:81 msgid "You must select a device." msgstr "您必須選擇一個裝置。" #: cups/kmwipp.cpp:35 msgid "Remote IPP server" msgstr "遠端 IPP 伺服器" #: cups/kmwipp.cpp:39 msgid "" "

Enter the information concerning the remote IPP server owning the " "targeted printer. This wizard will poll the server before continuing.

" msgstr "" "

輸入連結到遠端 IPP 印表機所需的資訊，這個精靈會先探尋那個伺服器是否正確才" "會繼續。

" #: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 #: rlpr/kmwrlpr.cpp:62 msgid "Host:" msgstr "主機：" #: cups/kmwipp.cpp:43 msgid "Port:" msgstr "埠：" #: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 msgid "Empty server name." msgstr "空的伺服器名稱。" #: cups/kmwipp.cpp:59 msgid "Incorrect port number." msgstr "不正確的連接埠號！" #: cups/kmwipp.cpp:72 msgid "Unable to connect to %1 on port %2 ." msgstr "無法透過埠 %2 連結 %1！" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" msgstr "IPP 印表機資訊" #: cups/kmwippprinter.cpp:55 msgid "&Printer URI:" msgstr "印表機 URI(&P)：" #: cups/kmwippprinter.cpp:64 msgid "" "

Either enter the printer URI directly, or use the network scanning " "facility.

" msgstr "

您可以直接輸入印表機的 URI 位置，或者使用網路掃描偵測功能。

" #: cups/kmwippprinter.cpp:65 msgid "&IPP Report" msgstr "IPP 報告(&I)" #: cups/kmwippprinter.cpp:112 msgid "You must enter a printer URI." msgstr "您必須輸入印表機的 URI。" #: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 msgid "No printer found at this address/port." msgstr "在這個位址/埠上找不到印表機。" #: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" msgstr "<未知主機> (%1)" #: cups/kmwippprinter.cpp:173 msgid "Name: %1
" msgstr "名稱： %1
" #: cups/kmwippprinter.cpp:174 msgid "Location: %1
" msgstr "位置： %1
" #: cups/kmwippprinter.cpp:175 msgid "Description: %1
" msgstr "描述： %1
" #: cups/kmwippprinter.cpp:182 msgid "Model: %1
" msgstr "型號： %1
" #: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 msgid "Idle" msgstr "閒置" #: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 msgid "Stopped" msgstr "已停止" #: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 msgid "Processing..." msgstr "處理中..." #: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 msgid "" "_: Unknown State\n" "Unknown" msgstr "不明的狀態" #: cups/kmwippprinter.cpp:192 msgid "State: %1
" msgstr "狀態： %1
" #: cups/kmwippprinter.cpp:199 #, c-format msgid "Unable to retrieve printer info. Printer answered:

%1" msgstr "無法接收印表機資訊，印表機回應：

%1" #: cups/kmwippprinter.cpp:222 msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)." msgstr "無法產生報表。IPP 請求失敗，訊息：%1 (0x%2)。" #: cups/kmwippselect.cpp:38 msgid "Remote IPP Printer Selection" msgstr "遠端 IPP 印表機選擇" #: cups/kmwippselect.cpp:51 msgid "You must select a printer." msgstr "您必須選擇一個印表機。" #: cups/kmwother.cpp:41 msgid "URI Selection" msgstr "URI 選擇" #: cups/kmwother.cpp:46 msgid "" "

Enter the URI corresponding to the printer to be installed. Examples:

  • smb://[login[:passwd]@]server/printer
  • lpd://server/queue
  • parallel:/dev/lp0
" msgstr "" "

輸入印表機的 URI 位置。例如：

  • smb://[login[:passwd]@]server/" "printer
  • lpd://server/queue
  • parallel:/dev/lp0
" #: cups/kmwother.cpp:51 management/kminfopage.cpp:52 #: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54 msgid "URI:" msgstr "URI：" #: cups/kmwother.cpp:78 msgid "CUPS Server %1:%2" msgstr "CUPS 伺服器 %1:%2" #: cups/kmwquota.cpp:46 msgid "second(s)" msgstr "秒" #: cups/kmwquota.cpp:47 msgid "minute(s)" msgstr "分" #: cups/kmwquota.cpp:48 msgid "hour(s)" msgstr "時" #: cups/kmwquota.cpp:49 msgid "day(s)" msgstr "天" #: cups/kmwquota.cpp:50 msgid "week(s)" msgstr "星期" #: cups/kmwquota.cpp:51 msgid "month(s)" msgstr "月" #: cups/kmwquota.cpp:79 msgid "Printer Quota Settings" msgstr "印表機限額設定" #: cups/kmwquota.cpp:104 msgid "" "

Set here the quota for this printer. Using limits of 0 means that " "no quota will be used. This is equivalent to set quota period to No " "quota (-1). Quota limits are defined on a per-user base and " "applied to all users.

" msgstr "" "

在此設定印表機的限額設定。使用 0 表示不設限額。這也等於把限額時間" "設定為 沒有限額 (-1) 一樣。限額可以針對個別使用者設定，也" "可以套用在所有使用者上。

" #: cups/kmwquota.cpp:130 msgid "You must specify at least one quota limit." msgstr "您至少要指定一個限額。" #: cups/kmwusers.cpp:41 msgid "Allowed Users" msgstr "允許的使用者" #: cups/kmwusers.cpp:42 msgid "Denied Users" msgstr "拒絕的使用者" #: cups/kmwusers.cpp:44 msgid "Define here a group of allowed/denied users for this printer." msgstr "在此定義允許/拒絕可以使用印表機的群組項目。" #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "類型(&T)：" #: cups/kphpgl2page.cpp:33 msgid "" " Print in Black Only (Blackplot)

The 'blackplot' option " "specifies that all pens should plot in black-only: The default is to use the " "colors defined in the plot file, or the standard pen colors defined in the " "HP-GL/2 reference manual from Hewlett Packard.


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

    -o "
"blackplot=true

" msgstr "" "只使用黑筆（Blackplot）

Blackplot 選項會指定只以黑色來畫。預設" "是使用 HP-GL/2 參考手冊中定義的標準顏色，或是參考 plot 檔案中的顏色定義。

進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項" "參數是一樣的： 

     -o blackplot=true

" #: cups/kphpgl2page.cpp:48 msgid "" " Scale Print Image to Page Size

The 'fitplot' option " "specifies that the HP-GL image should be scaled to fill exactly the page " "with the (elsewhere selected) media size.

The default is 'fitplot " "is disabled'. The default will therefore use the absolute distances " "specified in the plot file. (You should be aware that HP-GL files are very " "often CAD drawings intended for large format plotters. On standard office " "printers they will therefore lead to the drawing printout being spread " "across multiple pages.)

Note:This feature depends upon an " "accurate plot size (PS) command in the HP-GL/2 file. If no plot size is " "given in the file the filter converting the HP-GL to PostScript assumes the " "plot is ANSI E size.


Additional hint for power " "users: This TDEPrint GUI element matches with the CUPS commandline job " "option parameter: 

     -o fitplot=true

" msgstr "" "調整列印圖像大小以符合紙張（Fitplot）

fitplot 選項會調整 HP-" "GL 圖像大小，以完全符合紙張的尺寸。

預設是關閉，也就是使用 plot 檔案中" "所定義的絕對大小。（HP-GL 檔案通常都是 CAD 的大張的圖檔。在一般的辦公室印表機" "通常都要印出好多頁。）

注意：這個功能是依賴 HP-GL/2 檔案中「精" "確的圖像尺寸」（accurate plot size, PS）指令。如果沒有指定尺寸，那麼過濾器會" "假設圖像為 ANSI E 尺寸，並轉換成 PostScript 檔。


進階使用" "者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

     -"
"o fitplot=true

" #: cups/kphpgl2page.cpp:68 msgid "" " Set Pen Width for HP-GL (if not defined in file).

The pen " "width value can be set here in case the original HP-GL file does not have " "it set. The pen width specifies the value in micrometers. The default value " "of 1000 produces lines that are 1000 micrometers == 1 millimeter in width. " "Specifying a pen width of 0 produces lines that are exactly 1 pixel wide.

Note: The penwidth option set here is ignored if the pen " "widths are set inside the plot file itself..


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

    -o "
"penwidth=...   # example: \"2000\" or \"500\"

" msgstr "" "設定 HP-GL 線條寬度（penwidth）

若是 HP-GL 檔案中沒有設定原始線" "條寬度的值，那麼可以在這裡設定。指定數值的單位為微米。預設值為 1000，也就是 " "1 毫米。若指定為 0，則表示線條的寬度為 1 像素。

注意：如果 " "plot 檔案中有設定 penwidth 這個選項，則這裡的設定會被忽略。


" "

進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣" "的： 

     -o penwidth=...     #例： \"2000\" 或 \"500\"

" #: cups/kphpgl2page.cpp:85 msgid "" " HP-GL Print Options

All options on this page are only " "applicable if you use TDEPrint to send HP-GL and HP-GL/2 files to one of " "your printers.

HP-GL and HP-GL/2 are page description languages " "developed by Hewlett-Packard to drive Pen Plotting devices.

" "

TDEPrint can (with the help of CUPS) convert the HP-GL file format and " "print it on any installed printer.

Note 1: To print HP-GL " "files, start 'kprinter' and simply load the file into the running kprinter." "

Note 2: The 'fitplot' parameter provided on this dialog does " "also work for printing PDF files (if your CUPS version is more recent than " "1.1.22).


Additional hint for power users: " "These TDEPrint GUI elements match with CUPS commandline job option " "parameters: 

     -o blackplot=...  # examples: \"true\" or \"false"
"\"  
     -o fitplot=...    # examples: \"true\" or \"false\"  
     -"
"o penwidth=...   # examples: \"true\" or \"false\"

" msgstr "" "HP-GL 列印選項

這一頁中所有的選項都只在您透過 TDEPrint 送出 HP-" "GL 或 HP-GL/2 檔案給您的印表機才會用到。

HP-GL 與 HP-GL/2 都是由 HP 開" "發出來，用來控制「筆繪圖裝置」（Pen Plotting devices）的「頁描述語言」（Page " "description language）。

TDEPrint 可以透過 CUPS 的協助，將 HP-GL 檔案" "格式轉換並列印出來。

注意：

1. 要列印 HP-GL 檔案，只要開" "啟 kprinter 並將檔案載入即可。

2. fitplot 參數也可以用於列印 PDF 檔" "（如果您的 CUPS 版本大於 1.1.22 的話）。


進階使用者的額外" "提示：這些選項與以下的 CUPS 命令列選項參數是一樣的： 

     -o "
"blackplot=...   #例：\"true\" 或 \"false\"  
      -o fitplot=...   # 例："
"\"true\" 或 \"false\"  
      -o penwidth=...   # 例：\"2000\" 或 "
"\"500\"

" #: cups/kphpgl2page.cpp:113 msgid "HP-GL/2 Options" msgstr "HP-GL/2 選項" #: cups/kphpgl2page.cpp:115 msgid "&Use only black pen" msgstr "只使用黑筆(&U)" #: cups/kphpgl2page.cpp:118 msgid "&Fit plot to page" msgstr "調整成適合頁面大小(&F)" #: cups/kphpgl2page.cpp:122 msgid "&Pen width:" msgstr "線條寬度(&P)" #: cups/kpimagepage.cpp:44 msgid "" "

Brightness: Slider to control the brightness value of all " "colors used.

The brightness value can range from 0 to 200. Values " "greater than 100 will lighten the print. Values less than 100 will darken " "the print.


Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

    -o brightness=...      # use range from \"0\" to "
"\"200\"

" msgstr "" "

亮度：調整所有顏色的亮度值。

亮度值範圍從 0 到 200。大" "於 100 的值會讓列印結果變淡，而小於 100 的值會讓列印結果變暗。


" "

進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣" "的： 

     -o brightness=...     #範圍從 0 到 200

" #: cups/kpimagepage.cpp:58 msgid "" "

Hue (Tint): Slider to control the hue value for color " "rotation.

The hue value is a number from -360 to 360 and represents " "the color hue rotation. The following table summarizes the change you will " "see for the base colors:

" " " " " " " "
Original hue=-45 hue=45
Red Purple Yellow-" "orange
Green Yellow-greenBlue-green
Yellow Orange Green-yellow
BlueSky-blue Purple
Magenta Indigo Crimson
Cyan Blue-green Light-navy-blue

Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

    -o hue=...     # use range "
"from \"-360\" to \"360\"

" msgstr "" "

色度：控制顏色輪轉的色度值。

色度值範圍從 -360 到 360。" "以下的表格整理了您會看到基本顏色的改變。

原始顏色 色度 -45 色度 " "45
紅 紫 黃橘
綠" " 黃綠 藍綠
黃 橘 綠黃" "
藍 天藍 紫
紅紫 藍紫 深紅
青 藍綠 淡藏" "青

進階使用者的額外提示：這個" "選項與以下的 CUPS 命令列選項參數是一樣的： 

     -o hue=...     #範圍從 "
"-360 到 360

" #: cups/kpimagepage.cpp:83 msgid "" "

Saturation: Slider to control the saturation value for all " "colors used.

The saturation value adjusts the saturation of the " "colors in an image, similar to the color knob on your television. The color " "saturation value.can range from 0 to 200. On inkjet printers, a higher " "saturation value uses more ink. On laserjet printers, a higher saturation " "uses more toner. A color saturation of 0 produces a black-and-white print, " "while a value of 200 will make the colors extremely intense.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o saturation=...      # use range from \"0\" to \"200\"
" msgstr "" "

飽和度：控制所有顏色的飽和度。

飽和度的數值調整的是圖片" "中顏色的飽和度，就有點像電視上調整顏色的鈕。範圍從 0 到 200。在噴墨式印表機" "中，數值越高用的墨就越多。在雷射印表機上，數值越高用的碳粉就越多。數值設為 0 " "則只會印出黑白的輸出，而 200 則是最鮮豔的彩色。


進階使用者" "的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

     -o "
"saturation=...     # 範圍從 0 到 200

" #: cups/kpimagepage.cpp:101 msgid "" "

Gamma: Slider to control the gamma value for color " "correction.

The gamma value can range from 1 to 3000. A gamma " "values greater than 1000 lightens the print. A gamma value less than 1000 " "darken the print. The default gamma is 1000.

Note:

the " "gamma value adjustment is not visible in the thumbnail preview.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o gamma=...      # use range from \"1\" to \"3000\"

" "" msgstr "" "

灰度係數（Gamma）：控制顏色校正的係數。

Gamma 值的範圍" "從 1 到 3000。大於 1000 會讓列印結果變淡，小於 1000 則讓列印結果變暗。預設值" "為 1000。

注意：

Gamma 值調整的結果不會在縮圖預覽中顯現。

進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項" "參數是一樣的： 

     -o gamma=...     # 範圍從 1 到 3000

" #: cups/kpimagepage.cpp:118 msgid "" "

Image Printing Options

All options controlled on " "this page only apply to printing images. Most image file formats are " "supported. To name a few: JPEG, TIFF, PNG, GIF, PNM (PBM/PGM/PNM/PPM), Sun " "Raster, SGI RGB, Windows BMP. Options to influence color output of image " "printouts are:

  • Brightness
  • Hue
  • " "Saturation
  • Gamma

For a more detailed " "explanation about Brightness, Hue, Saturation and Gamma settings, please " "look at the 'WhatsThis' items provided for these controls.

" msgstr "" "

圖片列印選項

這一頁中所有的選項都只在您列印圖片時才會用" "到。大部份的圖片檔案格式都有支援，例如 JPEG、TIFF、PNG、GIF、PNM（PBM/PGM/" "PNM/PPM）、Sun Raster、SGI RGB、Windows BMP 等等。影響圖片列印顏色輸出的選項" "有：

  • 亮度（Brightness）
  • 色度（Hue）
  • 飽和度" "（Saturation）
  • 灰度係數（Gamma）

    • 關於這些設定的解釋，請" "參考「這是什麼？」的說明。

    " #: cups/kpimagepage.cpp:136 msgid "" "

    Coloration Preview Thumbnail

    The coloration preview " "thumbnail indicates change of image coloration by different settings. " "Options to influence output are:

    • Brightness
    • Hue " "(Tint)
    • Saturation
    • Gamma

    " "

    For a more detailed explanation about Brightness, Hue, Saturation and " "Gamma settings, please look at the 'WhatsThis' items provided for these " "controls.

    " msgstr "" "

    彩色縮圖預覽

    彩色縮圖預覽可以讓您測試不同的顏色調整。影" "響輸出結果的選項包括：

    • 亮度（Brightness）
    • 色度（Hue）
      • " "
    • 飽和度（Saturation）
    • 灰度係數（Gamma）

      • 關於這些設定" "的解釋，請參考「這是什麼？」的說明。

      " #: cups/kpimagepage.cpp:152 msgid "" "

      Image Size: Dropdown menu to control the image size on the " "printed paper. Dropdown works in conjunction with slider below. Dropdown " "options are:.

      • Natural Image Size: Image prints in its " "natural image size. If it does not fit onto one sheet, the printout will be " "spread across multiple sheets. Note, that the slider is disabled when " "selecting 'natural image size' in the dropdown menu.
      • " "Resolution (ppi): The resolution value slider covers a number range " "from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch " "(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 " "pixels per inch, for example, but 5x4 inches at 600 pixels per inch. If the " "specified resolution makes the image larger than the page, multiple pages " "will be printed. Resolution defaults to 72 ppi.
      • % of Page " "Size: The percent value slider covers numbers from 1 to 800. It " "specifies the size in relation to the page (not the image). A scaling of " "100 percent will fill the page as completely as the image aspect ratio " "allows (doing auto-rotation of the image as needed). A scaling of more than " "100 will print the image across multiple sheets. A scaling of 200 percent " "will print on up to 4 pages.
        • Scaling in % of page size defaults to 100 " "%.
      • % of Natural Image Size: The percent value slider moves from " "1 to 800. It specifies the printout size in relation to the natural image " "size. A scaling of 100 percent will print the image at its natural size, " "while a scaling of 50 percent will print the image at half its natural " "size. If the specified scaling makes the image larger than the page, " "multiple pages will be printed. Scaling in % of natural image size defaults " "to 100 %.

      Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

           -o natural-scaling=...     # range in  %  is "
"1....800  
           -o scaling=...             # range in  %  is 1....800  "
"
           -o ppi=...                 # range in ppi is 1...1200

      " "      " msgstr "" "

      圖片大小這個下拉選單與底下的滑動器一起控制列印在紙上的圖像大" "小。下拉選單選項包括:

      • 實際圖片大小：圖片以它的實際大小列" "印。如果尺寸超過紙張大小，則會印到兩張以上的紙上。注意：選取這個選項的話，底" "下的滑動器會被關閉。
      • 解析度 (ppi)：解析度的範圍從 1 到 1200，" "單位是每英吋像素（Pixels Per Inch, PPI）。以 3000x2400 像素的圖片而言，設定 " "300 PPI 則會印成 10吋x8吋的大小，設定 600 PPI 則印成 5吋x4吋大小。如果轉換後" "的大小仍然大於紙張的尺寸，則一樣會印到兩張以上的紙上。預設值為 72 PPI。
        • " "
      • 紙張尺寸比例：以紙張尺寸為基準計算的百分比例。範圍從 1 到 800。設" "為 100 也就是 100% 符合紙張尺寸，超過 100 則會列印到兩張以上的紙上。設為 200 " "則會印到四張紙上。預設為 100。
      • 實際圖片大小比例：以實際圖片大" "小為基準計算的百分比例，範圍從 1 到 800。設為 100 也就是以實際圖片大小來列" "印。如果計算後的大小超過紙張的尺寸，則會列印到兩張以上的紙上。預設為 100。

      進階使用者的額外提示：這個選項與以下的 CUPS 命令" "列選項參數是一樣的： 

           -o natural-scaling=...     # 範圍從 1 到 "
"800
            -o scaling=...     # 範圍從 1 到 800      -o ppi=...     # 範圍"
"從 1 到 1200

      " #: cups/kpimagepage.cpp:192 msgid "" "

      Position Preview Thumbnail

      This position preview " "thumbnail indicates the position of the image on the paper sheet.

      Click " "on horizontal and vertical radio buttons to move image alignment on paper " "around. Options are:

      • center
      • top
        • " "
      • top-left
      • left
      • bottom-left
      • " "bottom
      • bottom-right
      • right
      • top-" "right

      " msgstr "" "

      位置縮圖預覽

      位置縮圖預覽幫助您確認圖片在紙上的位置。

      選擇水平或垂直的圓鈕來移動紙的邊界。可用的選項包括：

      • 置中" "(center)
      • 置頂(top)
      • 置左上方(top-left)
      • 置左方" "(left)
      • 置左下方(bottom-left)
      • 置底(bottom)
      • 置右下方" "(bottom-right)
      • 置右方(right)
      • 置右上方(top-right)

        • " #: cups/kpimagepage.cpp:210 msgid "" "

        Reset to Default Values

        Reset all coloration " "settings to default values. Default values are:

        • Brightness: 100 " "
        • Hue (Tint). 0
        • Saturation: 100
        • Gamma: " "1000

        " msgstr "" "

        重置回預設值

        將所有顏色設定都重置回預設值。預設值為： " "

        • 亮度：100
        • 色度：0
        • 飽和度：100
        • 灰度係數：" "1000

        " #: cups/kpimagepage.cpp:222 msgid "" "

        Image Positioning:

        Select a pair of radiobuttons " "to move image to the position you want on the paper printout. Default is " "'center'.


        Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

            -o position=...       # examples: \"top-left\" or "
"\"bottom\"

        " msgstr "" "

        圖片位置：

        選擇一組圓鈕來移動圖片在紙上的位置。預設為" "「置中」。


        進階使用者的額外提示：這個選項與以下的 CUPS " "命令列選項參數是一樣的： 

             -o position=...     # 例：\"top-left\" 或 "
"\"bottom\"

        " #: cups/kpimagepage.cpp:237 msgid "Image" msgstr "影像" #: cups/kpimagepage.cpp:239 msgid "Color Settings" msgstr "顏色設定" #: cups/kpimagepage.cpp:241 msgid "Image Size" msgstr "影像大小" #: cups/kpimagepage.cpp:243 msgid "Image Position" msgstr "影像位置" #: cups/kpimagepage.cpp:247 msgid "&Brightness:" msgstr "亮度(&B)：" #: cups/kpimagepage.cpp:252 msgid "&Hue (Color rotation):" msgstr "色度(顏色輪轉)(&H)：" #: cups/kpimagepage.cpp:257 msgid "&Saturation:" msgstr "飽和度(&S)：" #: cups/kpimagepage.cpp:262 msgid "&Gamma (Color correction):" msgstr "灰度系數(顏色校正)(&G)：" #: cups/kpimagepage.cpp:283 msgid "&Default Settings" msgstr "預設設定(&D)" #: cups/kpimagepage.cpp:289 msgid "Natural Image Size" msgstr "實際圖片大小" #: cups/kpimagepage.cpp:290 msgid "Resolution (ppi)" msgstr "解析度 (ppi)" #: cups/kpimagepage.cpp:292 #, no-c-format msgid "% of Page" msgstr "紙張尺寸比例" #: cups/kpimagepage.cpp:294 #, no-c-format msgid "% of Natural Image Size" msgstr "實際圖片大小比例" #: cups/kpimagepage.cpp:304 msgid "&Image size type:" msgstr "圖片大小類型(&I)：" #: cups/kpschedulepage.cpp:40 msgid "" "

        Print Job Billing and Accounting

        Insert a meaningful " "string here to associate the current print job with a certain account. This " "string will appear in the CUPS \"page_log\" to help with the print " "accounting in your organization. (Leave it empty if you do not need it.)

        " "It is useful for people who print on behalf of different \"customers\", like " "print service bureaux, letter shops, press and prepress companies, or " "secretaries who serve different bosses, etc.


        " "

        Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

            -o "
"job-billing=...         # example: \"Marketing_Department\" or \"Joe_Doe\"  "
"

        " msgstr "" "

        收費資訊：

        這裡可以定義一個字串，將目前的列印工作與目前" "的使用者帳號紀錄下來。這個字串會顯示在 CUPS 的 page_log 中，讓您可以向使用者" "收費。如果您不需要此功能，將此欄位留白即可。



        進階使用者的" "額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

             -o "
"job-billing=...          # 例：\"Marketing_Department\"或\"Joe\"
        " #: cups/kpschedulepage.cpp:60 msgid "" "

        Scheduled Printing

        Scheduled printing lets you " "control the time of the actual printout, while you can still send away your " "job now and have it out of your way.

        Especially useful is the " "\"Never (hold indefinitely)\" option. It allows you to park your job until a " "time when you (or a printer administrator) decides to manually release it. " "

        This is often required in enterprise environments, where you normally " "are not allowed to directly and immediately access the huge production " "printers in your Central Repro Department. However it is okay to " "send jobs to the queue which is under the control of the operators (who, " "after all, need to make sure that the 10,000 sheets of pink paper which is " "required by the Marketing Department for a particular job are available and " "loaded into the paper trays).


        Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

            -o job-hold-until=...      "
"# example: \"indefinite\" or \"no-hold\"

        " msgstr "" "

        列印排程

        列印排程讓您可以控制實際執行列印的時間。不過您" "還是可以馬上把您的列印工作送出去。

        通常在這些選項當中，最有用的當屬" "「無限期停止列印」。這個選項讓您可以暫時停止所有的列印工作，直到您（或列印管" "理員）決定再開始列印為止。

        這通常在企業環境上會較常用到。不過這段期間" "您還是可以將列印工作送到列印佇列之中。



        進階使用者的額外提" "示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

             -o job-hold-"
"until=...          # 例：\"indefinite\"或\"no-hold\"

        " #: cups/kpschedulepage.cpp:87 msgid "" "

        Page Labels

        Page Labels are printed by CUPS at the " "top and bottom of each page. They appear on the pages surrounded by a little " "frame box.

        They contain any string you type into the line edit field.

        " "

        Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

            -o page-label=\"...\"      # example: \"Company Confidential\"   
          "
msgstr ""
"
        頁面標籤
         
        頁面標籤由 CUPS 印在每一頁的頂部或底端。
         "
"
        您可以在此欄位中輸入您要使用的頁面標籤。
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o page-"
"label=...          # 例：\"Company Confidential\"  
        "

#: cups/kpschedulepage.cpp:102
msgid ""
"  
        Job Priority
          
        Usually CUPS prints all jobs per queue "
"according to the \"FIFO\" principle: First In, First Out. 
         The "
"job priority option allows you to re-order the queue according to your "
"needs. 
         It works in both directions: you can increase as well as decrease "
"priorities. (Usually you can only control your own jobs). 
         Since "
"the default job priority is \"50\", any job sent with, for example, \"49\" "
"will be printed only after all those others have finished. Conversely, a "
"\"51\" or higher priority job will go right to the top of a populated queue "
"(if no other, higher prioritized one is present).
         
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
            -o "
"job-priority=...   # example: \"10\" or \"66\" or \"99\"  
         
                  "
msgstr ""
" 
        工作優先等級
         
        通常 CUPS 的列印工作佇列是根據「先進先出」"
"(FIFO) 的原則來排列。 
         
        這個選項允許您根據您的需求來重新排列佇列內的工"
"作。
         
        您可以選擇要增加還是降低您的優先等級。（通常您只能改變您自己的列"
"印工作。）
         
        預設值為 50，設定等級為 49 的列印工作，就要等到其他的工作都"
"完成後才會被執行，而設定為 51 的列印工作，則會立即被排到佇列的最前面，如果沒"
"有比它更高等級的列印工作的話。
         

        進階使用者的額外提示：這"
"個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o job-"
"priority=...          # 例：\"10\" 或\"66\"  
        "

#: cups/kpschedulepage.cpp:126
msgid "Advanced Options"
msgstr "進階選項"

#: cups/kpschedulepage.cpp:137
msgid "Immediately"
msgstr "立即"

#: cups/kpschedulepage.cpp:138
msgid "Never (hold indefinitely)"
msgstr "無限期停止列印"

#: cups/kpschedulepage.cpp:139
msgid "Daytime (6 am - 6 pm)"
msgstr "白天 (早上 6 點到下午 6 點)"

#: cups/kpschedulepage.cpp:140
msgid "Evening (6 pm - 6 am)"
msgstr "晚間 (下午 6 點到早上 6 點)"

#: cups/kpschedulepage.cpp:141
msgid "Night (6 pm - 6 am)"
msgstr "午夜 (下午 6 點到早上 6 點)"

#: cups/kpschedulepage.cpp:142
msgid "Weekend"
msgstr "週末"

#: cups/kpschedulepage.cpp:143
msgid "Second Shift (4 pm - 12 am)"
msgstr "第二班 (下午 4 點到午夜 12 點)"

#: cups/kpschedulepage.cpp:144
msgid "Third Shift (12 am - 8 am)"
msgstr "第三班 (午夜 12 點到上午 8 點)"

#: cups/kpschedulepage.cpp:145
msgid "Specified Time"
msgstr "指定時間"

#: cups/kpschedulepage.cpp:160
msgid "&Scheduled printing:"
msgstr "排程列印(&S)："

#: cups/kpschedulepage.cpp:163
msgid "&Billing information:"
msgstr "收費資訊(&B)："

#: cups/kpschedulepage.cpp:166
msgid "T&op/Bottom page label:"
msgstr "頂端/底端頁面標籤(&O)："

#: cups/kpschedulepage.cpp:169
msgid "&Job priority:"
msgstr "工作優先等級(&J)："

#: cups/kpschedulepage.cpp:200
msgid "The time specified is not valid."
msgstr "所指定的時間不正確。"

#: cups/kptagspage.cpp:36
msgid ""
" 
        Additional Tags
         You may send additional commands to the "
"CUPS server via this editable list.  There are 3 purposes for this: 
           "
"
        • Use any current or future standard CUPS job option not supported by the  "
"TDEPrint GUI. 
          •  
        • Control any custom job option you may want to "
"support in custom CUPS filters  and backends plugged into the CUPS filtering "
"chain.
          •   
        • Send short messages to the operators of your production "
"printers in your  Central Repro Department. 
          
        Standard "
"CUPS job options: A complete list of standard CUPS job  options is in "
"the CUPS User Manual.  "
"Mappings of the kprinter user interface widgets to respective CUPS job "
"option  names are named in the various WhatsThis help items..
         "
"
        Custom CUPS job options: CUPS print servers may be customized with "
"additional  print filters and backends which understand custom job options. "
"You can specify such  custom job options here. If in doubt, ask your system "
"administrator..
         
         
         
        Operator Messages: You may "
"send additional messages to the operator(s) of your production printers (e."
"g. in your Central Repro Department
        ) Messages can be read by the "
"operator(s) (or yourself) by viewing the \"Job IPP Report\" for the "
"job.
         Examples:
         
         A standard CUPS job option:
            "
"(Name) number-up                -- (Value) 9                     
         
         A job option for custom CUPS filters or "
"backends:
            (Name) DANKA_watermark          -- (Value) "
"Company_Confidential   
         
         A message to the operator(s):
            "
"(Name) Deliver_after_completion -- (Value) to_Marketing_Departm."
"
         
         
        Note: the fields must not include spaces, tabs or "
"quotes. You may need to  double-click on a field to edit it. 
        Warning: Do not use such standard CUPS option names which also can be used  "
"through the TDEPrint GUI. Results may be  unpredictable if they conflict,  "
"or if they are sent multiple times. For all options supported by the GUI, "
"please do use  the GUI. (Each GUI element's  'WhatsThis' names the related "
"CUPS option name.) 
                  "
msgstr ""
" 
        其他標記
         您可以透過這份清單對 CUPS 伺服器送出額外的命令。"
"這樣做有三種目的： 
           
        • 這樣可以使用任何目前或將來 TDEPrint GUI 無法支援"
"的標準 CUPS 工作選項。
          •  
        • 如果您的 CUPS 過濾鍊中有自定的 CUPS 過濾器及"
"後端外掛，這可以讓您控制自定的工作選項以便有更好的支援。
          •  
        • 讓您送出簡"
"短的訊息給在「中央複製部門」（Central Repro Department）的印表機管理員。 
         
        標準的 CUPS 工作選項：CUPS 使用者手冊中有一份標準的 CUPS 工作選項清單。kprinter 使用者介"
"面對應的 CUPS 工作選項都在「這是什麼？」說明中有說明。
         
        自定的 CUPS "
"工作選項：CUPS 印表伺服器可以自定列印過濾器與後端介面，而它們可能會有自己"
"的工作選項。您可以在這裡指定這些支援選項。如果不確定，請您詢問您的系統管理"
"員。
         
         
         
        管理員訊息：您可以在這裡設定送出額外的訊息"
"給管理員。管理員（或您）可以透過「工作 IPP 報告」來閱讀關於此工作的訊息。  例： 
         
        標準的工作選項： 
             (Name) number-up                -- （數值）9
         
         自定的 CUPS 過濾器或後端的"
"工作選項： 
             (Name) DANKA_watermark            -- （數"
"值）Company_Confidential
         
         
        注意：這個欄位不能包含"
"空白、引號、tab 等。您可能需要雙擊該欄位來編輯。 
        警告：不要使"
"用 TDEPrint GUI 也會使用的標準 CUPS 的選項名稱，這樣有可能造成衝突，而形成無"
"法預知的結果。所有 GUI 支援的選項都可以經由「這是什麼？」的說明得知，若要使用"
"請直接透過 GUI 使用。
        "

#: cups/kptagspage.cpp:77
msgid "Additional Tags"
msgstr "其他標記"

#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:239
#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141
#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101
msgid "Name"
msgstr "名稱"

#: cups/kptagspage.cpp:83
msgid "Value"
msgstr "值"

#: cups/kptagspage.cpp:92
msgid "Read-Only"
msgstr "唯讀"

#: cups/kptagspage.cpp:115
msgid "The tag name must not contain any spaces, tabs or quotes: %1."
msgstr "標記名稱不能含有空格：%1。"

#: cups/kptextpage.cpp:41
msgid ""
"   
        Characters Per Inch
          
        This setting controls the "
"horizontal size of characters when printing a text file. 
         
        The default "
"value is 10, meaning that the font is scaled in a way that 10 characters  "
"per inch will be printed. 
          
          
        Additional hint for power "
"users: This TDEPrint GUI element matches  with the CUPS commandline job "
"option parameter:  
            -o cpi=...          # example: \"8\" or "
"\"12\"  
         
                  "
msgstr ""
" 
        每英吋字元數
         
        這個設定控制列印文字檔時的字元的寬度。 
        預設值為 10，意即字型會被調整為每英吋印 10 個字元。
         
         
        進階"
"使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
             -o cpi=...          # 例：\"8\" 或 \"12\"  
        "

#: cups/kptextpage.cpp:55
msgid ""
"   
        Lines Per Inch
          
        This setting controls the vertical "
"size of characters when printing a text file. 
         
        The default value is "
"6, meaning that the font is scaled in a way that 6 lines  per inch will be "
"printed. 
          
          
        Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
            -o lpi=...         # example \"5\" or \"7\"  
         
          "
msgstr ""
" 
        每英吋行數
         
        這個設定控制列印文字檔時的字元的高度。
         "
"
        預設值為 6，意即字型會被調整為每英吋列印六行。
        進階使用者的額外提"
"示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o "
"lpi=...          # 例：\"5\" 或 \"7\"  
        "

#: cups/kptextpage.cpp:69
msgid ""
"   
        Columns
          
        This setting controls how many columns of "
"text will be printed on each page when. printing text files. 
          
        The "
"default value is 1, meaning that only one column of text per page  will be "
"printed. 
          
          
        Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
            -o columns=...     # example: \"2\" or \"4\"  
         
          "
msgstr ""
" 
        欄
         
        這個設定控制列印文字檔時，在每一頁中會分成幾欄。
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣"
"的： 
             -o cpi=...          # 例：\"8\" 或 \"12\"  
        "

#: cups/kptextpage.cpp:84
msgid "   Preview icon changes when you turn on or off prettyprint.  "
msgstr "預覽的圖示會在您打開或關閉 prettyprint 時改變。"

#: cups/kptextpage.cpp:87
msgid ""
"   
        Text Formats
          
        These settings control the appearance "
"of text on printouts. They are only valid for  printing text files or input "
"directly through kprinter. 
          
        Note: These settings have no "
"effect whatsoever for other input formats than  text, or for printing from "
"applications such as the TDE Advanced Text Editor. (Applications  in general "
"send PostScript to the print system, and 'kate' in particular has its own  "
"knobs to control the print output. 
        . 
          
        Additional hint for "
"power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
             -o cpi=...         # "
"example: \"8\" or \"12\"  
             -o lpi=...         # example: \"5\" or "
"\"7\"  
             -o columns=...     # example: \"2\" or \"4\"  
         
          "
msgstr ""
" 
        文字格式
         
        這些設定控制印出文字的顯示方式。只有在列印文字"
"檔及直接透過 kprinter 列印時才有效。
         
        進階使用者的額外提示：這個"
"選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o cpi=...          # "
"例：\"8\" 或 \"12\"  
             -o lpi=...          # 例：\"5\" 或 \"7\"  "
"
             -o column=...     # 例：\"2\"或\"4\"
        "

#: cups/kptextpage.cpp:108
#, fuzzy
msgid ""
"   
        Margins
          
        These settings control the margins of "
"printouts on the paper. They are not valid for  jobs originating from "
"applications which define their own page layout internally and  send "
"PostScript to TDEPrint (such as KOffice, OpenOffice or LibreOffice). 
          "
"
        When printing from TDE applications, such as KMail and Konqueror, or "
"printing an ASCII text  file through kprinter, you can choose your preferred "
"margin settings here. 
          
        Margins may be set individually for each edge "
"of the paper. The combo box at the bottom lets you change  the units of "
"measurement between Pixels, Millimeters, Centimeters, and Inches. 
          "
"
        You can even use the mouse to grab one margin and drag it to the intended "
"position (see the  preview picture on the right side). 
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
             -o "
"page-top=...      # example: \"72\"  
             -o page-bottom=...   # "
"example: \"24\"  
             -o page-left=...     # example: \"36\"  
             -"
"o page-right=...    # example: \"12\"  
         
                  "
msgstr ""
" 
        邊界
         
        這些設定控制列印輸出在紙張上的邊界留白大小。如果是"
"直接透過應用程式送來的列印工作，通常他們會定義自己的輸出版面，因此這個設定會"
"無效。
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選"
"項參數是一樣的： 
             -o page-top=...          # 例：\"72\"  
              -"
"o page-bottom=...     # 例：\"24\"  
             -o page-left=...     # 例："
"\"36\"  
             -o page-right=...     # 例：\"12\"  
        "

#: cups/kptextpage.cpp:134
msgid ""
"   
        Turn Text Printing with Syntax Highlighting (Prettyprint) On!
          
        ASCII text file printouts can be 'prettyfied' by enabling this "
"option. If you do so,  a header is printed at the top of each page. The "
"header contains  the page number, job title (usually the filename), and the "
"date. In addition, C and  C++ keywords are highlighted, and comment lines "
"are italicized.
         
        This prettyprint option is handled by CUPS.
          "
"
        If you prefer another 'plaintext-to-prettyprint' converter, look for the "
"enscript  pre-filter on the Filters tab. 
         
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
             -o "
"prettyprint=true.  
         
                  "
msgstr ""
" 
        開啟語法突出顯示（Prettyprint）
         
        開啟這個選項可以在列印"
"文字檔時「美化」輸出結果：包括在每一頁的頂端會有一個標頭，內有頁數、工作標題"
"（通常是檔名），還有日期等。而列印的內容中，C 與 C++ 的關鍵字會被突顯"
"(highlight)，註解則以斜體表示。
         
        這個選項是由 CUPS 來處理。
         
        如果"
"您打算使用其他「美化純文字」的轉換器，可以參考「過濾器」頁中預先定義好的"
"「enscript」過濾器。
         
        進階使用者的額外提示：這個選項與以"
"下的 CUPS 命令列選項參數是一樣的： 
             -o prettyprint=true  
        "

#: cups/kptextpage.cpp:153
msgid ""
"   
        Turn Text Printing with Syntax Highlighting (Prettyprint) Off! "
"
          
        ASCII text file printing with this option turned off are "
"appearing without a page  header and without syntax highlighting. (You can "
"still set the page margins, though.) 
          
          
          
        Additional "
"hint for power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
            -o prettyprint=false   
          "
msgstr ""
" 
        關閉語法突出顯示（Prettyprint）
         
        關閉這個選項會恢復成一"
"般的輸出。
         
        進階使用者的額外提示：這個選項與以下的 CUPS "
"命令列選項參數是一樣的： 
             -o prettyprint=false  
        "

#: cups/kptextpage.cpp:167
msgid ""
"   
        Print Text with Syntax Highlighting (Prettyprint)
          "
"
        ASCII file printouts can be 'prettyfied' by enabling this option. If you "
"do so,  a header is printed at the top of each page. The header contains  "
"the page number, job title (usually the filename), and the date. In "
"addition, C and  C++ keywords are highlighted, and comment lines are "
"italicized.
         
        This prettyprint option is handled by CUPS.
          
        If "
"you prefer another 'plaintext-to-prettyprint' converter, look for the "
"enscript  pre-filter on the Filters tab. 
          
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
             -o "
"prettyprint=true.  
             -o prettyprint=false  
         
                  "
msgstr ""
" 
        語法突出顯示（Prettyprint）
         
        開啟這個選項可以在列印文字"
"檔時「美化」輸出結果：包括在每一頁的頂端會有一個標頭，內有頁數、工作標題（通"
"常是檔名），還有日期等。而列印的內容中，C 與 C++ 的關鍵字會被突顯"
"(highlight)，註解則以斜體表示。
         
        這個選項是由 CUPS 來處理。
         
        如果"
"您打算使用其他「美化純文字」的轉換器，可以參考「過濾器」頁中預先定義好的"
"「enscript」過濾器。
         
        進階使用者的額外提示：這個選項與以"
"下的 CUPS 命令列選項參數是一樣的： 
             -o prettyprint=true  
              -"
"o prettyprint=false  
        "

#: cups/kptextpage.cpp:188
msgid "Text"
msgstr "文字"

#: cups/kptextpage.cpp:191
msgid "Text Format"
msgstr "文字格式"

#: cups/kptextpage.cpp:193
msgid "Syntax Highlighting"
msgstr "語法突出顯示"

#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45
msgid "Margins"
msgstr "邊界"

#: cups/kptextpage.cpp:200
msgid "&Chars per inch:"
msgstr "每英吋字元數(&L)："

#: cups/kptextpage.cpp:204
msgid "&Lines per inch:"
msgstr "每英吋行數(&L)："

#: cups/kptextpage.cpp:208
msgid "C&olumns:"
msgstr "欄(&O)："

#: cups/kptextpage.cpp:216
msgid "&Disabled"
msgstr "停用(&D)"

#: cups/kptextpage.cpp:218
msgid "&Enabled"
msgstr "啟用(&E)"

#: driver.cpp:379 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307
#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54
#: management/kmwend.cpp:49
msgid "General"
msgstr "一般"

#: driver.cpp:387 foomatic2loader.cpp:268
msgid "Adjustments"
msgstr "調整"

#: driver.cpp:389
msgid "JCL"
msgstr "JCL"

#: driver.cpp:391 management/kmwlocal.cpp:60
msgid "Others"
msgstr "其他"

#: driverview.cpp:47
msgid ""
"   List of Driver Options (from PPD).  
        The upper pane of this "
"dialog page contains all printjob options as laid  down in the printer's "
"description file (PostScript Printer Description == 'PPD') 
         
        Click on "
"any item in the list and watch the lower pane of this dialog page  display "
"the available values. 
          
        Set the values as needed. Then use one of the "
"pushbuttons below to proceed:
          
            
        • 'Save' your settings "
"if you want to re-use  them in your next job(s) too. 'Save' will "
"store your settings permanently until  you change them again. 
          • . "
"
        • Click 'OK' (without a prior click on 'Save', if you "
"want to use  your selected settings just once, for the next print job. "
"'OK'  will forget your current settings when kprinter is closed "
"again, and will start next time  with the previously saved defaults. 
          •  "
"
        • 'Cancel' will not change anything. If you proceed to print "
"after clicking  'Cancel', the job will print with the default "
"settings of this queue.  
         
        Note. The number of available job "
"options depends strongly on the actual  driver used for your print queue. "
"'Raw' queues do not have a driver or a   PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present  in the kprinter "
"dialog.
                  "
msgstr ""
"驅動程式選項清單 
        上方為在 PostScript 印表機描述檔（ppd）中所有"
"的列印工作選項。
         
        點選清單中的任一項目，並看下方顯示可用的值。
         
        "
"您可以設定這些數值。並用底下的按鈕來進行動作：
         
           
        • 「儲存」可以將您"
"的設定（永久）儲存起來。
          •  
        • 「確定」（在沒有按下「儲存」鍵的情況下）可"
"以讓您的設定在這一次生效，但是當 kprinter 關閉後，下一次再啟動時，這次所設定"
"的值會遺失。
          •  
        • 「取消」不會改變任何設定。
         
        注意：實"
"際可使用的工作選項與實際使用的驅動程式非常有關係。「Raw 原始印表機」沒有任何"
"驅動程式或 PPD 檔，因此這一頁不會出現。
        "

#: driverview.cpp:71
msgid ""
"   List of Possible Values for given Option (from PPD).  
        The "
"lower pane of this dialog page contains all possible values of the "
"printoption  highlighted above, as laid  down in the printer's description "
"file (PostScript Printer Description == 'PPD') 
         
        Select the value you "
"want and proceed. 
          
        Then use one of the pushbuttons below to leave "
"this dialog:
          
            
        • 'Save' your settings if you want to re-"
"use  them in your next job(s) too. 'Save' will store your settings "
"permanently until  you change them again. 
          • . 
        • Click 'OK' if "
"you want to use your selected settings just once, for the  next print job. "
"'OK'  will forget your current settings when kprinter is closed "
"again, and will start next time  with your previous defaults. 
          •  "
"
        • 'Cancel' will not change anything. If you proceed to print "
"after clicking  'Cancel', the job will print with the default "
"settings of this queue.  
         
        Note. The number of available job "
"options depends strongly on the actual  driver used for your print queue. "
"'Raw' queues do not have a driver or a   PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present  in the kprinter "
"dialog.
                  "
msgstr ""
"選項可用的數值清單 
        下方為在 PostScript 印表機描述檔（ppd）中，"
"關於選取的選項所有可用的數值。
         
        請選擇您要使用的數值，然後選擇一個動"
"作：
         
           
        • 「儲存」可以將您的設定（永久）儲存起來。
          •  
        • 「確定」"
"（在沒有按下「儲存」鍵的情況下）可以讓您的設定在這一次生效，但是當 kprinter "
"關閉後，下一次再啟動時，這次所設定的值會遺失。
          •  
        • 「取消」不會改變任何"
"設定。
         
        注意：實際可使用的工作選項與實際使用的驅動程式非常"
"有關係。「Raw 原始印表機」沒有任何驅動程式或 PPD 檔，因此這一頁不會出現。"

#: droptionview.cpp:61
msgid "Value:"
msgstr "值："

#: droptionview.cpp:167
msgid "String value:"
msgstr "字串值："

#: droptionview.cpp:306 droptionview.cpp:341
msgid "No Option Selected"
msgstr "沒有選定任何選項"

#: ext/kextprinterimpl.cpp:47
msgid "Empty print command."
msgstr "沒有提供列印命令。"

#: ext/kmextmanager.cpp:41
msgid "PS_printer"
msgstr "PS 印表機"

#: ext/kmextmanager.cpp:43
msgid "PostScript file generator"
msgstr "PostScript 檔案產生器"

#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72
msgid ""
"No valid print executable was found in your path. Check your installation."
msgstr "在您的路徑中沒有適當供印表執行檔案，請檢查是否安裝正確。"

#: foomatic/kmfoomaticmanager.cpp:70
msgid "This is not a Foomatic printer"
msgstr "這並不是一台 Foomatic 印表機"

#: foomatic/kmfoomaticmanager.cpp:75
msgid "Some printer information are missing"
msgstr "某些印表機的資訊遺失了"

#: kmfactory.cpp:221
msgid "There was an error loading %1. The diagnostic is:
        %2
        "
msgstr ""
"在載入 %1 時發生錯誤。\n"
"診斷結果為： 
        %2
        "

#: kmjob.cpp:114
msgid "Queued"
msgstr "排隊中"

#: kmjob.cpp:117
msgid "Held"
msgstr "保持"

#: kmjob.cpp:123
msgid "Canceled"
msgstr "已取消"

#: kmjob.cpp:126
msgid "Aborted"
msgstr "放棄"

#: kmjob.cpp:129
msgid "Completed"
msgstr "完成"

#: kmmanager.cpp:70
msgid "This operation is not implemented."
msgstr "此操作方式沒有實作。"

#: kmmanager.cpp:169
msgid "Unable to locate test page."
msgstr "無法找到測試頁"

#: kmmanager.cpp:450
msgid "Can't overwrite regular printer with special printer settings."
msgstr "無法以特殊印表機的設定覆寫一般印表機。"

#: kmmanager.cpp:479
#, c-format
msgid "Parallel Port #%1"
msgstr "並列埠 #%1"

#: kmmanager.cpp:487 kmmanager.cpp:503 kxmlcommand.cpp:661
#, c-format
msgid "Unable to load TDE print management library: %1"
msgstr "無法載入 TDE 列印管理函式庫： %1"

#: kmmanager.cpp:492 kxmlcommand.cpp:669
msgid "Unable to find wizard object in management library."
msgstr "無法在管理函式庫中找到魔術物件。"

#: kmmanager.cpp:508
msgid "Unable to find options dialog in management library."
msgstr "無法在管理函式庫中找到選項對話方塊。"

#: kmmanager.cpp:535
msgid "No plugin information available"
msgstr "找不到該外掛程式的相關資訊"

#: kmprinter.cpp:144
msgid "(rejecting jobs)"
msgstr "(拒絕工作)"

#: kmprinter.cpp:144
msgid "(accepting jobs)"
msgstr "(接受工作)"

#: kmprinter.cpp:197 kprintdialog.cpp:983
msgid "All Files"
msgstr "全部檔案"

#: kmspecialmanager.cpp:53
msgid ""
"A file share/tdeprint/specials.desktop was found in your local TDE "
"directory. This file probably comes from a previous TDE release and should "
"be removed in order to manage global pseudo printers."
msgstr ""
"在您的本地 TDE 目錄內發現了文件 share/tdeprint/specials.desktop。該檔案是較早"
"版本的 TDE 使用的，應該被刪除以便於能夠使用特殊(假的)印表機。"

#: kmuimanager.cpp:158
#, c-format
msgid "Configuration of %1"
msgstr "%1 的設定"

#: kmvirtualmanager.cpp:161
msgid ""
"You are about to set a pseudo-printer as your personal default. This "
"setting is specific to TDE and will not be available outside TDE "
"applications. Note that this will only make your personal default printer as "
"undefined for non-TDE applications and should not prevent you from printing "
"normally. Do you really want to set %1 as your personal default?"
msgstr ""
"您要將此虛擬印表機設為預設。這個虛擬印表機為 TDE 特有的，所以可能無法對"
"非 TDE 應用程式發揮作用。注意對非 TDE 應用程式而言，您等於沒有預設印表機，因"
"此沒辦法正常列印。您確定要將 %1 設為您的個人預設值嗎？"

#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91
msgid "Set as Default"
msgstr "設成預設值"

#: kpcopiespage.cpp:46
msgid ""
" 
        Page Selection
          
        Here you can control if you print a "
"certain selection only out of all the pages from the complete document. 
         "
"        "
msgstr ""
" 
        選擇頁數
         
        您可以控制您要列印整份文件中的哪些頁數。
        "

#: kpcopiespage.cpp:51
msgid ""
" All Pages: Select \"All\" to print the complete document. Since "
"this is the default, it is pre-selected. 
                 "
msgstr "全部列印：選擇「全部」印出整份文件。這是預設值。
        "

#: kpcopiespage.cpp:55
#, fuzzy
msgid ""
" Current Page: Select \"Current\" if you want  to print "
"the page currently visible in your TDE application.
         
        Note: this "
"field is disabled if you print from non-TDE applications like Firefox, "
"PaleMoon, SeaMonkey or OpenOffice and LibreOffice, since here TDEPrint has "
"no means to determine which document page you are currently viewing.
        "
msgstr ""
"目前的頁面：選擇「目前」則只印出目前您應用程式上觀看的那一頁。 
        注意：如果您不是從 TDE 應用程式中列印，則這一欄會被關閉，因為 "
"TDEPrint 無法決定您目前在觀看文件的第幾頁。
        "

#: kpcopiespage.cpp:61
msgid ""
" Page Range: Choose a \"Page Range\" to select a subset of the "
"complete document pages to be printed. The format is \"n,m,o-p,q,r,s-t, u"
"\".
         
        Example: \"4,6,10-13,17,20,23-25\" will "
"print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your document. 
          
          
        Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
            -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"  
         "
"
                 "
msgstr ""
"頁數範圍：選擇「範圍」可以輸入您要列印整份文件中哪一部份的頁數。格"
"式為：\"n,m,o-p,q,r,s-t,u\"。
         
        例：\"4,6,10-13,17,20,23-25\" 會"
"列印文件的第 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 頁。
         
         
        "
"進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
             -o page-ranges=...     # 例：\"4,6,10-13,17,20,23-25\"
        "

#: kpcopiespage.cpp:75
msgid ""
" Page Set: 
        Choose \"All Pages\", \"Even Pages\" or \"Odd Pages\" if you want to print a page selection matching "
"one of these terms. The default is \"All Pages\".
         
        Note: If you combine a selection of a \"Page Range\" with a \"Page "
"Set\" of \"Odd\" or \"Even\", you will only get the "
"odd or even pages from the originally selected page range. This is useful if "
"you odd or even pages from the originally selected page range. This is "
"useful if you want to print a page range in duplex on a simplex-only "
"printer. In this case you can feed the paper to the printer twice; in the "
"first pass, select \"Odd\" or \"Even\" (depending on your printer model), in "
"second pass select the other option. You may need to \"Reverse\" "
"the output in one of the passes (depending on your printer model).
          "
"
          
          
        Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
            -o page-set=...        # example: \"odd\" or \"even\"  
         
          "
"        "
msgstr ""
"頁面設定 
        您可以選擇要列印「全部」、「奇數頁」或「偶數頁」。預設"
"為列印「全部」。
         
        注意：如果您組合了「範圍」與「奇數頁」或「偶數"
"頁」，系統只會列印選擇頁數範圍中的奇數頁或偶數頁。通常這是用在您要在無法雙面"
"列印的印表機上印雙面文件時。如此您可以先印奇數頁，再重新放入紙張的另一面印出"
"偶數頁。此時請注意第二次餵入紙張的方向，會依印表機不同設定而不同。
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參"
"數是一樣的： 
             -o page-set=...     # 例：\"odd\" 或 \"even
        "

#: kpcopiespage.cpp:98
msgid ""
" Output Settings: Here you can determine the number of copies, "
"the output order and the collate mode for the pages of your printjob. (Note, "
"that the maximum number of copies  allowed to print may be restricted by "
"your print subsystem.)
         
        The 'Copies' setting defaults to 1. 
          "
"
          
          
        Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
             -o copies=...            # examples: \"5\" or \"42\"  
             -o "
"outputorder=...       # example:  \"reverse\" 
             -o "
"Collate=...           # example:  \"true\" or \"false\"  
         
         .        "
msgstr ""
"輸出設定：
        您可以決定要列印幾份，列印的順序與裝訂模式。（注意，"
"您的列印子系統可能會限制最多只能列印幾份。）
         
        列印份數預設值為 1。
         "
"
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數"
"是一樣的： 
             -o copies=...     # 例：\"5\" 或 \"42\"
              -o "
"outputorder=...     # 例：\"reverse\"
              -o Collate=...     # 例："
"\"true\" 或 \"false\"
         
        "

#: kpcopiespage.cpp:116
msgid ""
" Number of Copies: Determine the number of requested copies here. "
"You can increase or decrease the number of printed copies by clicking on the "
"up and down arrows. You can also type the figure directly into the box. 
         "
"
          
          
        Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
             -o copies=...            # examples: \"5\" or \"42\"  
         
          "
"        "
msgstr ""
"列印份數：決定這份文件要印出幾份。您可以直接輸入份數，也可以用旁邊"
"的小按鈕來調整。
         
         
        進階使用者的額外提示：這個選項與以下"
"的 CUPS 命令列選項參數是一樣的： 
             -o copies=...     # 例：\"5\" 或 "
"\"42\"
        "

#: kpcopiespage.cpp:129
msgid ""
" Collate Copies 
        If the \"Collate\" checkbox is "
"enabled (default), the output order for multiple copies of a multi-page "
"document will be \"1-2-3-..., 1-2-3-..., 1-2-3-...\".
         
        If the "
"\"Collate\" checkbox is disabled, the output order for multiple copies "
"of a multi-page document will be \"1-1-1-..., 2-2-2-..., 3-3-3-...\".
         "
"
          
          
        Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
            -o Collate=...           # example:  \"true\" or \"false\"  
         "
"
                  "
msgstr ""
"裝訂模式 
        如果打開「裝訂模式」，要列印好幾份文件的時候，輸出的順"
"序會是 1-2-3-..., 1-2-3-..., 1-2-3-...\"。
         
        如果沒有打開的話，則輸出的"
"順序會是 1-1-1-..., 2-2-2-..., 3-3-3-...\"。
         
         
        進階使用者的"
"額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o "
"Collate=...     # 例：\"true\" 或 \"false\"
        "

#: kpcopiespage.cpp:143
msgid ""
" Reverse Order 
         If the \"Reverse\" checkbox is "
"enabled, the output order for multiple copies of a multi-page document will "
"be \"...-3-2-1, ...-3-2-1, ...-3-2-1\", if you also have enabled "
"the \"Collate\" checkbox at the same time (the usual usecase).
         "
"
        If the \"Reverse\" checkbox is enabled, the output order for "
"multiple copies of a multi-page document will be "
"\"...-3-3-3, ...-2-2-2, ...-1-1-1\", if you have disabled the "
"\"Collate\" checkbox at the same time. 
         
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
            -o "
"outputorder=...       # example:  \"reverse\"  
         
                  "
msgstr ""
"反序列印 
        如果打開「反序列印」的話，頁面輸出的順序會是"
"\"...-3-2-1,\"。如果您同時打開「裝訂模式」的話，則多份文件的輸出順序會是"
"\"...-3-2-1, ...-3-2-1, ...-3-2-1\"。
         
         
        進階使用者的額外提"
"示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o "
"outputorder=...     # 例：\"reverse\"
        "

#: kpcopiespage.cpp:164
msgid "C&opies"
msgstr "列印份數(&O)"

#: kpcopiespage.cpp:168
msgid "Page Selection"
msgstr "紙張選擇"

#: kpcopiespage.cpp:170
msgid "&All"
msgstr "全部(&A)"

#: kpcopiespage.cpp:172
msgid "Cu&rrent"
msgstr "目前(&R)"

#: kpcopiespage.cpp:174
msgid "Ran&ge"
msgstr "範圍(&G)"

#: kpcopiespage.cpp:179
msgid ""
"
        Enter pages or group of pages to print separated by commas (1,2-5,8).
        "
msgstr "
        請輸入要列印頁碼或一系列的頁碼，各頁碼以逗號分開 (1,2-5,8)。
        "

#: kpcopiespage.cpp:183
msgid "Output Settings"
msgstr "輸出設定"

#: kpcopiespage.cpp:185
msgid "Co&llate"
msgstr "裝訂模式(&L)"

#: kpcopiespage.cpp:187
msgid "Re&verse"
msgstr "反序列印(&V)"

#: kpcopiespage.cpp:192
msgid "Cop&ies:"
msgstr "列印份數(&I)："

#: kpcopiespage.cpp:199
msgid "All Pages"
msgstr "整份文件"

#: kpcopiespage.cpp:200
msgid "Odd Pages"
msgstr "奇數頁"

#: kpcopiespage.cpp:201
msgid "Even Pages"
msgstr "偶數頁"

#: kpcopiespage.cpp:203
msgid "Page &set:"
msgstr "頁面設定(&S)："

#: kpcopiespage.cpp:258
msgid "Pages"
msgstr "頁"

#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54
msgid "Driver Settings"
msgstr "驅動程式設定"

#: kpdriverpage.cpp:48
msgid ""
"Some options selected are in conflict. You must resolve these conflicts "
"before continuing. See Driver Settings tab for detailed information."
msgstr ""
"部分選定的選項相衝突。您必須在繼續之前解決這些衝突。詳見驅動程式設定頁以取得詳細資訊。"

#: kpfileselectpage.cpp:33
msgid "&Files"
msgstr "檔案(&F)"

#: kpfilterpage.cpp:42
msgid ""
"  Add Filter button 
        This button calls a little dialog to let "
"you select a filter here. 
         
        Note 1: You can chain different "
"filters as long as you make  sure that the output of one fits as input of "
"the next. (TDEPrint  checks your filtering chain and will warn you if you "
"fail to do so.
          
        Note 2: The filters you define here are "
"applied to your jobfile  before it is handed downstream to "
"your spooler and print  subsystem (e.g. CUPS, LPRng, LPD).
      " msgstr "" "新增過濾器

      這個按鈕會叫出一個對話框，讓您選取過濾器。

      " "

      注意：您可以將不同的過濾器串鍊起來，只要您確定其中一個過濾器的輸出" "適用於下一個過濾器的輸入。（TDEPrint 會幫您檢查過濾鍊，並在有問題時提出警告）" "

      注意：您所選取的過濾器會在列印工作送到印表子系統「之前」先處" "理。

      " #: kpfilterpage.cpp:54 msgid "" " Remove Filter button

      This button removes the highlighted " "filter from the list of filters. " msgstr "移除過濾器

      這個按鈕移除所選取的過濾器。

      " #: kpfilterpage.cpp:59 msgid "" " Move Filter Up button

      This button moves the highlighted " "filter up in the list of filters, towards the front of the filtering chain. " "

      " msgstr "" "過濾器上移

      這個按鈕將過濾鍊中所選取的過濾器往上移動。

      " #: kpfilterpage.cpp:64 msgid "" " Move Filter Down button

      This button moves the highlighted " "filter down in the list of filters, towards the end of the filtering chain.." "

      " msgstr "" "過濾器下移

      這個按鈕將過濾鍊中所選取的過濾器往下移動。

      " #: kpfilterpage.cpp:69 msgid "" " Configure Filter button

      This button lets you configure the " "currently highlighted filter. It opens a separate dialog.

      " msgstr "設定過濾器

      這個按鈕讓您設定所選取的過濾器。

      " #: kpfilterpage.cpp:75 msgid "" " Filter Info Pane

      This field shows some general info about " "the selected filter. Amongst them are:

      • the filter name " "(as displayed in the TDEPrint user interface);
      • the filter " "requirements (that is the external program that needs to present and " "executable on this system);
      • the filter input format (in " "the form of one or several MIME types accepted by the filter);
      • the filter output format (in the form of a MIME type generated by the filter);
      • a more or less verbose text " "describing the filter's operation.

      " msgstr "" "過濾器資訊

      這個欄位顯示關於所選取過濾器的一般資訊。包括：

        " "
      • 過濾器名稱（顯示在 TDEPrint 使用者介面上的名稱）
      • 過濾器需求（需" "要的外部程式）
      • 輸入格式（一個或多個 MIME 型態）
      • 輸出格式" "（過濾器產生的 MIME 型態）
      • 文字描述

      " #: kpfilterpage.cpp:91 msgid "" " Filtering Chain (if enabled, is run before actual job " "submission to print system)

      This field shows which filters are currently " "selected to act as 'pre-filters' for TDEPrint. Pre-filters are processing " "the print files before they are send downstream to your real print " "subsystem.

      The list shown in this field may be empty (default).

      The pre-filters act on the printjob in the order they are listed " "(from top to bottom). This is done by acting as a filtering chain " "where the output of one filter acts as input to the next. By putting the " "filters into the wrong order, you can make the filtering chain fail. For " "example: if your file is ASCII text, and you want the output being " "processed by the 'Multipage per Sheet' filter, the first filter must be one " "that processes ASCII into PostScript.

      TDEPrint can utilize any external filtering program which you may find useful through this " "interface.

      TDEPrint ships preconfigured with support for a " "selection of common filters. These filters however need to be installed " "independently from TDEPrint. These pre-filters work for all print " "subsystems supported by TDEPrint (such as CUPS, LPRng and LPD), because they " "are not depending on these.

      .

      Amongst the pre-configured filters " "shipping with TDEPrint are:

      • the Enscript text filter
      • a Multiple Pages per Sheet filter
      • a " "PostScript to PDF converter.
      • a Page Selection/" "Ordering filter.
      • a Poster Printing filter.
        • " "
      • and some more..
      To insert a filter into this list, simply " "click on the funnel icon (topmost on the right icon column group) " "and proceed.

      Please click on the other elements of this dialog to " "learn more about the TDEPrint pre-filters.

      " msgstr "" "過濾鍊

      這個欄位顯示 TDEPrint 的「預先過濾器」清單。它們會在列印" "工作送到列印子系統前先行處理。

      這個清單有可能是空的（預設為空的）。

      這個清單會照所列出順序來工作，由上而下。如果過濾鍊的位置錯誤，可能會讓" "列印工作停擺。

      TDEPrint 可以使用外部的過濾程式。

      TDEPrint 有內" "建一些常用的過濾器，通常這些過濾器適用於 TDEPrint 所有支援的列印子系統。

      " "

      這些內建的過濾器包括：

      • Enscript 文字過濾器
      • 單張多頁" "過濾器
      • PostScript 轉 PDF 過濾器
      • 紙張選擇/排序過濾器
        • " "
      • 海報列印過濾器
      • 其它...
      要新增新的過濾器到清單之中，只" "要按下漏斗型的按鈕即可。

      點選此對話框中的其他元件可以得知關於 " "TDEPrint 內建過濾器的資訊。

      " #: kpfilterpage.cpp:125 msgid "Filters" msgstr "過濾器" #: kpfilterpage.cpp:141 msgid "Add filter" msgstr "新增過濾器" #: kpfilterpage.cpp:146 msgid "Remove filter" msgstr "移除印表機" #: kpfilterpage.cpp:151 msgid "Move filter up" msgstr "將過濾器往上移動" #: kpfilterpage.cpp:156 msgid "Move filter down" msgstr "將過濾器向下移動" #: kpfilterpage.cpp:161 msgid "Configure filter" msgstr "設定過濾器器" #: kpfilterpage.cpp:279 msgid "Internal error: unable to load filter." msgstr "內部錯誤： 無法載入過濾器。" #: kpfilterpage.cpp:394 msgid "" "

      The filter chain is wrong. The output format of at least one filter is " "not supported by its follower. See Filters tab for more information." msgstr "" "

      過濾器鏈有錯誤。至少有一個過濾器的輸出格式不被其後的的過濾器所支援。查看" "過濾器以便於獲得更多資訊。

      " #: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 msgid "Requirements" msgstr "必備條件" #: kpfilterpage.cpp:408 msgid "Input" msgstr "輸入" #: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 msgid "Output" msgstr "輸出" #: kpgeneralpage.cpp:86 msgid "ISO A4" msgstr "ISO A4" #: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 util.h:72 msgid "US Letter" msgstr "US Letter" #: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 util.h:71 msgid "US Legal" msgstr "US Legal" #: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 util.h:69 msgid "Ledger" msgstr "Ledger" #: kpgeneralpage.cpp:90 util.h:68 msgid "Folio" msgstr "Folio" #: kpgeneralpage.cpp:91 msgid "US #10 Envelope" msgstr "US #10 信封" #: kpgeneralpage.cpp:92 msgid "ISO DL Envelope" msgstr "ISO DL 信封" #: kpgeneralpage.cpp:93 util.h:70 msgid "Tabloid" msgstr "Tabloid" #: kpgeneralpage.cpp:94 msgid "ISO A3" msgstr "ISO A3" #: kpgeneralpage.cpp:95 msgid "ISO A2" msgstr "ISO A2" #: kpgeneralpage.cpp:96 msgid "ISO A1" msgstr "ISO A1" #: kpgeneralpage.cpp:97 msgid "ISO A0" msgstr "ISO A0" #: kpgeneralpage.cpp:107 msgid "Upper Tray" msgstr "上層紙匣" #: kpgeneralpage.cpp:108 msgid "Lower Tray" msgstr "下層紙匣" #: kpgeneralpage.cpp:109 msgid "Multi-Purpose Tray" msgstr "多用途紙匣" #: kpgeneralpage.cpp:110 msgid "Large Capacity Tray" msgstr "大容量紙匣" #: kpgeneralpage.cpp:114 msgid "Normal" msgstr "標準" #: kpgeneralpage.cpp:115 msgid "Transparency" msgstr "透明" #: kpgeneralpage.cpp:124 msgid "" "

      \"General\"

      This dialog page contains general print job settings. General settings are applicable to most printers, " "most jobs and most job file types.

      To get more specific help, enable " "the \"WhatsThis\" cursor and click on any of the text labels or GUI " "elements of this dialog. " msgstr "" "

      一般設定

      這一頁包括了一般的列印工作設定，通常可用於大部" "份的印表機，工作與檔案型態。

      您可以打開「這是什麼？」說明，並點選每一" "個 GUI 元素看看詳細說明。

      " #: kpgeneralpage.cpp:132 msgid "" "

      Page size: Select paper size to be printed on from the " "drop-down menu.

      The exact list of choices depends on the printer " "driver (\"PPD\") you have installed.


      Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

          -o PageSize=...         # "
"examples: \"A4\" or \"Letter\"

      " msgstr "" "

      紙張大小：從下拉式選單選擇要列印的紙張大小。

      清單中可選" "擇的內容與您安裝的印表機驅動程式有關。


      進階使用者的額外提" "示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

           -o "
"PageSize=...     # 例：\"A4\" 或 \"Letter\"

      " #: kpgeneralpage.cpp:145 msgid "" "

      Paper type: Select paper type to be printed on from the " "drop-down menu.

      The exact list of choices depends on the printer " "driver (\"PPD\") you have installed.


      Additional " "hint for power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

          -o MediaType=...        # "
"example: \"Transparency\"

      " msgstr "" "

      紙張型態：從下拉式選單選擇要列印的紙張型態。

      清單中可選" "擇的內容與您安裝的印表機驅動程式有關。


      進階使用者的額外提" "示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

           -o "
"MediaType=...     # 例：\"Transparency\"

      " #: kpgeneralpage.cpp:158 msgid "" "

      Paper source: Select paper source tray for the paper to be " "printed on from the drop-down menu.

      The exact list of choices depends on " "the printer driver (\"PPD\") you have installed.


      " "

      Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

          -o "
"InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"
      " msgstr "" "

      紙張來源：從下拉式選單選擇要列印的紙張來源。

      清單中可選" "擇的內容與您安裝的印表機驅動程式有關。


      進階使用者的額外提" "示：這個選項與以下的 CUPS 命令列選項參數是一樣的： 

           -o "
"InputSlot=...     # 例：\"Lower\" 或 \"LargeCapacity\"

      " #: kpgeneralpage.cpp:171 msgid "" "

      Image Orientation: Orientation of the printed page image " "on your paper is controlled by the radio buttons. By default, the " "orientation is Portrait

      You can select 4 alternatives:

        " "
      • Portrait..Portrait is the default setting.
      • " "Landscape.
      • Reverse Landscape. Reverse Landscape " "prints the images upside down.
      • Reverse Portrait. Reverse " "Portrait prints the image upside down.
      The icon changes " "according to your selection.


      Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

          -o orientation-"
"requested=...       # examples: \"landscape\" or \"reverse-portrait\"   
        "
msgstr ""
" 
      圖片方向：這裡可以控制列印出的圖片的方向。預設為「縱向」"
"（Portrait）。
       
      您有四種選擇： 
         
      • 縱向（Portrait）。為預設"
"選項。
        •  
      • 橫向（Landscape）。
        •  
      • 反橫向（Reverse "
"Landscape）。印橫向，但上下顛倒。
        •  
      • 反縱向（Reverse Portrait）"
"。印縱向，但上下顛倒。
       圖示會根據您的選擇而改變。
       
       "
"
      進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣"
"的： 
           -o orientation-requested=...     # 例：\"landscape\" 或 "
"\"reverse-portrait\"
      "

#: kpgeneralpage.cpp:192
msgid ""
"   
      Duplex Printing: These controls may be grayed out if your "
"printer  does not support duplex printing (i.e. printing on both "
"sides of the sheet).  These controls are active if your printer supports "
"duplex printing.  
        You can choose from 3 alternatives: 
       
          
      •  "
"None. This prints each page of the job on one side of the sheets "
"only. 
        •   
      •  Long Side. This prints the job on both sides of the "
"paper sheets.  It prints the job in a way so that the backside has the same "
"orientation as the front  side if you turn the paper over the long edge. "
"(Some printer drivers name this mode  duplex-non-tumbled).  
        •   "
"
      •  Short Side. This prints the job on both sides of the paper "
"sheets.  It prints the job so that the backside has the reverse orientation "
"from the front  side if you turn the paper over the long edge, but the same "
"orientation, if you turn it over  the short edge. (Some printer drivers name "
"this mode  duplex-tumbled).  
        •   
        
        "
"
      Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
          -o "
"duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\"  
       "
"
              "
msgstr ""
" 
      雙面列印： 
      如果您的印表機有支援雙面列印，您可以在這裡選取。"
"如果沒有，這個選項會被關閉。
       
      您可以有三個選擇：
       
         
      • 無：關閉雙面列印功能。
        •  
      • 長邊：雙面列印，如果您在長邊翻面的話，正"
"反面就會是同一個方向。有的印表機驅動程式稱此為「不翻轉雙面列印」。
        •  "
"
      • 短邊：雙面列印，如果您在短邊翻面的話，正反面就會是同一個方向，而在"
"長邊翻面的話，正反面則方向相反。有的印表機驅動程式稱此為「翻轉雙面列印」。 
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選項"
"參數是一樣的： 
             -o duplex=...     # 例：\"tumble\" 或 \"two-sided-"
"short-edge\"
        "

#: kpgeneralpage.cpp:218
msgid ""
"   
        Banner Page(s): Select banner(s) to print one or two "
"special sheets  of paper just before or after your main job. 
         
        Banners "
"may contain some pieces of job information, such as user name, time of "
"printing, job title and more. 
         
        Banner pages are useful to separate "
"different jobs more easily, especially in a multi-user  environment. 
         "
"
        Hint: You can design your own banner pages. To make use "
"of them, just put the banner  file into the standard CUPS banners "
"directory (This is usually \"/usr/share/cups/banner/\"  Your custom "
"banner(s) must have one of the supported printable formats.  Supported "
"formats are ASCII text, PostScript, PDF and nearly any image format such as "
"PNG, JPEG or  GIF. Your added banner pages will appear in the drop down menu "
"after a restart of CUPS. 
         
        CUPS comes with a selection of banner "
"pages. 
         
          
          
        Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
            -o job-sheets=...       # examples: \"standard\" or "
"\"topsecret\"  
         
                  "
msgstr ""
" 
        旗幟（Banner）：選擇在列印開始前或結束後，先列印一或兩張特殊的"
"旗幟頁。
         
        旗幟內包含一些工作的資訊，如使用者名稱、列印時間、工作標題等"
"等。
         
        旗幟頁可以讓您輕易分辨不同的列印工作，尤其是在多使用者的環境下。"
"
         
        提示：您可以設計自己的旗幟頁。要使用自己的旗幟頁，只要將檔案放"
"到 CUPS 下的 banners 目錄（通常是放在 /usr/share/cups/banner/）。您自己的旗幟"
"頁必須是可列印的格式，像是文字檔、PostScript、PDF 或圖片格式檔。重新啟動 "
"CUPS 後就可以在下拉式選單中看到自己的旗幟。
         
        CUPS 有自己內建的旗幟頁。"
"
         
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令列選"
"項參數是一樣的： 
             -o job-sheets=...     # 例：\"standard\" 或 "
"\"topsecret\"
        "

#: kpgeneralpage.cpp:240
msgid ""
"   
        Pages per Sheet:  You can choose to print more than one "
"page onto each sheet of paper.  This is sometimes useful to save paper. 
         "
"
        Note 1: the page images get scaled down accordingly to print 2 or "
"4 pages per sheet.  The page image does not get scaled if you print 1 page "
"per sheet (the default setting.).  
        Note 2: If you select multiple "
"pages per sheet here, the scaling and re-arranging is done  by your printing "
"system. Be aware, that some printers can by themselves print multiple pages "
"per sheet.  In this case you find the option in the printer driver settings. "
"Be careful: if you enable multiple  pages per sheet in both places, your "
"printout will not look as you intended. 
         
          
          "
"
        Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
            -o "
"number-up=...        # examples: \"2\" or \"4\"  
         
                  "
msgstr ""
" 
        單張多頁：您可以選擇在一張紙上印出多頁內容。通常是為了節省紙"
"張。
         
        注意：列印的圖片會根據一張紙上頁數的多寡來決定要縮小多少。"
"如果選擇一張紙上印一頁（預設值）則不會做調整。
         
        注意：當您選擇一"
"張紙上印多頁時，列印系統會自動幫您調整大小。但是，有些印表機自己就有單張多頁"
"的功能。這種情況下您最好使用印表機自己的設定選項。如果您兩邊都使用此選項，印"
"出來的結果可能不會是您想要的
         
         
        進階使用者的額外提示：這"
"個選項與以下的 CUPS 命令列選項參數是一樣的： 
             -o number-up=...     "
"# 例：\"2\" 或 \"4\"
        "

#: kpgeneralpage.cpp:264 kpqtpage.cpp:118
msgid "Page s&ize:"
msgstr "紙張大小(&I)："

#: kpgeneralpage.cpp:268
msgid "Paper t&ype:"
msgstr "紙張類型(&Y)："

#: kpgeneralpage.cpp:272
msgid "Paper so&urce:"
msgstr "紙張來源(&U)："

#: kpgeneralpage.cpp:292
msgid "Duplex Printing"
msgstr "雙面列印"

#: kpgeneralpage.cpp:295 kpqtpage.cpp:143
msgid "Pages per Sheet"
msgstr "每張紙上列印頁數"

#: kpgeneralpage.cpp:301 kpqtpage.cpp:125
msgid "&Portrait"
msgstr "縱向(&P)"

#: kpgeneralpage.cpp:302 kpqtpage.cpp:128
msgid "&Landscape"
msgstr "橫向(&L)"

#: kpgeneralpage.cpp:303
msgid "&Reverse landscape"
msgstr "橫向反轉(&R)"

#: kpgeneralpage.cpp:304
msgid "R&everse portrait"
msgstr "縱向反轉(&E)"

#: kpgeneralpage.cpp:309
msgid ""
"_: duplex orientation\n"
"&None"
msgstr "無(&N)"

#: kpgeneralpage.cpp:310
msgid ""
"_: duplex orientation\n"
"Lon&g side"
msgstr "長邊(&G)"

#: kpgeneralpage.cpp:311
msgid ""
"_: duplex orientation\n"
"S&hort side"
msgstr "短邊(&H)"

#: kpgeneralpage.cpp:323
msgid "S&tart:"
msgstr "開始(&T)："

#: kpgeneralpage.cpp:324
msgid "En&d:"
msgstr "結束(&D)："

#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52
msgid "Disabled"
msgstr "停用"

#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50
msgid "Enabled"
msgstr "啟用"

#: kpposterpage.cpp:42
msgid "   5.  "
msgstr "   5.  "

#: kpposterpage.cpp:46
#, fuzzy
msgid ""
"   Print Poster (enabled or disabled).  
        If you enable this "
"option, you can print posters of different sizes  The printout will happen "
"in the form 'tiles' printed on smaller  paper sizes, which you can "
"stitch together later. If you enable this  option here, the 'Poster "
"Printing' filter will be auto-loaded in  the 'Filters' tab of this "
"dialog. 
         
        This tab is only visible if the external 'poster' "
"utility is  discovered by TDEPrint on your system. ['poster' is a "
"commandline  utility that enables you to convert PostScript files into tiled "
"printouts  which allow for oversized appearance of the stitched-together "
"tiles.] 
         
        Note: The standard version of 'poster' will not work. "
"Your system  must use a patched version of 'poster'. Ask your operating "
"system vendor to  provide a patched version of 'poster' if he does not "
"already. 
                 "
msgstr ""
"列印海報 
        如果開啟此選項，您可以列印不同大小的海報。列印結果會被"
"切割，分別印到紙上，稍後您可以把它們重組起來。若是您開啟此選項，您可以在「過"
"濾器」頁中看到「海報列印過濾器」已被自動載入。
         
        這一頁只在 TDEPrint 找"
"得到 \"poster\" 這支程式時才會出現。\"poster\" 這支程式是海報列印的工具，讓您"
"可以將 PostScript 檔做切割並分別列印。
         
        注意：標準版本的 "
"\"poster\" 程式無法運作。您必須使用更新過的版本。請詢問您的系統供應商是否有提"
"供更新過的 poster 版本。
        "

#: kpposterpage.cpp:62
msgid ""
"   Tile Selection widget  
        This GUI element is not only for "
"viewing your selections: it also  lets you interactively select the "
"tile(s) you want to print.  
         
        Hints  
            
        • Click any tile "
"to select it for printing.
          •   
        • To select multiple tiles to be printed  "
"at once, 'shift-click' on the tiles ('shift-click' means: hold down "
"the  [SHIFT]-key on your keyboard and click with the mouse while [SHIFT]-key "
"is held.)   Be aware that the order  of your clicking is also "
"significant to the order of printing the different tiles. 
          •  
          "
"Note 1: The order of your selection (and the order for printout of "
"the tiles)  is indicated by the contents of the text field below,  labelled "
"as 'Tile pages (to be printed):'
         Note 2: By default no "
"tile is selected. Before you can print (a part  of) your poster, you must "
"select at least one tile. 
                  "
msgstr ""
"選擇區塊 
        這裡不只是可以讓您預覽海報，而且可以個別選擇您要列印的"
"區塊。
         
        提示： 
           
        • 點選您要列印的任一區塊。
          •  
        • 要點選"
"多個區塊一起列印，您要按住 shift 鍵後再點選區塊。您點選的順序就是列印的順序。"
"
         注意：預設沒有選取任何區塊，因此在列印之前至少要選取一個區"
"塊。
        "

#: kpposterpage.cpp:83
msgid ""
"   Poster Size  
        Select the poster size you want from the "
"dropdown list. 
          Available sizes are all standard paper sizes up to  "
"'A0'. [A0 is the same size as 16 sheets of A4, or '84cm x 118.2cm'.] 
          "
"
        Notice, how the little preview window below changes with your "
"change of poster  size. It indicates to you how many tiles need to be "
"printed to make the poster,  given the selected paper size.
           
        Hint:"
" The little preview window below is not just a passive icon. You can "
"click  on its individual tiles to select them for printing. To select "
"multiple tiles to be printed  at once, you need to 'shift-click' on "
"the tiles ('shift-click' means: hold down the  [SHIFT]-key on your keyboard "
"and click with the mouse while [SHIFT]-key is held.) The order  of your "
"clicking is significant to the order of printing the different tiles. The "
"order of  your selection (and for the printed tiles) is indicated by the "
"contents of the text field  labelled as 'Tile pages (to be printed):'
         Note: By default no tile is selected. Before you can print (a "
"part  of) your poster, you must select at least one tile. 
                  "
msgstr ""
"海報尺寸 
        從下拉式選單中選取您要的海報尺寸，最大到 A0（84cm x "
"118.2cm，16 張 A4）。
         
        注意：底下的預覽視窗會根據您選擇的海報尺"
"寸，告訴您海報會被切割成多少塊。
         
        提示：您也可以在預覽圖示中點選"
"個別被切割的區塊來列印。要選擇一次列印多個區塊，您要按住 shift 鍵再點選。點選"
"的順序就會是列印的順序。
         
        注意：預設是不選取任何區塊，您要列印之"
"前必須至少選取一個區塊。
        "

#: kpposterpage.cpp:102
msgid ""
"   Paper Size  
        This field indicates the paper size the poster "
"tiles will be printed on.  To select a different paper size for your poster "
"tiles, go to the 'General' tab  of this dialog and select one from the "
"dropdown list. 
          Available sizes are most standard paper sizes supported "
"by your printer. Your printer's  supported paper sizes are read from the "
"printer driver info (as laid down in the 'PPD',  the printer "
"description file). Be aware that the 'Paper Size' selected may not be "
"supported  by 'poster' (example: 'HalfLetter') while it may well be "
"supported by your printer.  If  you hit that obstacle, simply use "
"another, supported Paper Size, like 'A4' or 'Letter'.  
        Notice, how "
"the little preview window below changes with your change of paper  size. It "
"indicates how many tiles need to be printed to make up the poster,  given "
"the selected paper and poster size.
           
        Hint: The little preview "
"window below is not just a passive icon. You can click  on its individual "
"tiles to select them for printing. To select multiple tiles to be printed  "
"at once, you need to 'shift-click' on the tiles ('shift-click' "
"means: hold down the  [SHIFT]-key on your keyboard and click with the mouse "
"while [SHIFT]-key is held.) The order  of your clicking is significant to "
"the order of printing the different tiles. The order of  your selection (and "
"for the printed tiles) is indicated by the contents of the text field  "
"labelled as 'Tile pages (to be printed):'
         Note: By "
"default no tile is selected. Before you can print (a part  of) your poster, "
"you must select at least one tile. 
                  "
msgstr ""
"紙張尺寸 
        這裡是指海報區塊要被印在多大的紙上。要選擇不同的紙張大"
"小來列印海報，您必須到「一般」設定中的下拉式選單中選取。可用的尺寸是由您的印"
"表機來決定。不過要注意的是，所選擇的紙張尺寸不一定被 \"poster\" 程式所支援"
"（如 \"HalfLetter\"）。這種狀況下請重新選取其他的尺寸。
         
        注意："
"底下的預覽視窗會根據您選擇的海報尺寸，告訴您海報會被切割成多少塊。
         
        "
"提示：您也可以在預覽圖示中點選個別被切割的區塊來列印。要選擇一次列印多個"
"區塊，您要按住 shift 鍵再點選。點選的順序就會是列印的順序。
         
        注意："
"預設是不選取任何區塊，您要列印之前必須至少選取一個區塊。
        "

#: kpposterpage.cpp:126
msgid ""
"   Cut Margin selection  
        Slider and spinbox let you determine "
"a 'cut margin' which will be printed onto  each tile of your poster "
"to help you cut the pieces as needed. 
         
        Notice, how the little "
"preview window above changes with your change of cut  margins. It indicates "
"to you how much space the cut margins will take away from each tile.  "
"
        Be aware, that your cut margins need to be equal to or greater "
"than the margins your  printer uses. The printer's capabilities are "
"described in the 'ImageableArea'  keywords of its driver PPD file. "
"
                  "
msgstr ""
"切割邊界 
        您可以選擇在海報中的每一個區塊中，要列印的邊界。
         "
"
        注意：預覽視窗中會顯示您改變邊界之後，列印紙張的邊界會留多少空白。"
"
         
        注意：您所設定的切割邊界要大於等於您印表機所設定使用的邊界。這"
"在印表機驅動程式的 PPD 檔案中的 ImageableArea 關鍵字中有描述。
        "

#: kpposterpage.cpp:137
msgid ""
"   Order and number of tile pages to be printed  
        This field "
"displays and sets the individual tiles to be printed, as well as the order  "
"for their printout. 
          You can file the field with 2 different methods:  "
"
            
        • Either use the interactive thumbnail preview above and '[SHIFT]-"
"click' on the tiles. 
          •   
        • Or edit this text field accordingly. 
          •   "
"
          
        When editing the field, you can use a '3-7' syntax instead of a "
"'3,4,5,6,7' one. 
          
        Examples:
          
            \"2,3,7,9,3\"  "
"
            \"1-3,6,8-11\"  "
msgstr ""
"要列印區塊的順序及編號 
        這裡顯示您所選擇要列印的區塊編號，以及它"
"們的順序。
         
        您有兩種方式： 
           
        • 直接點選縮圖來決定要列印哪些區塊。"
"
          •  
        • 或是直接在這裡寫入編號。
         
         
        寫入編號的語法可以用 "
"3-7 來取代 3,4,5,6,7。
         
        例如：
         
        \"2,3,7,9,13\"
        "
"\"1-3,6,8-11\"
        "

#: kpposterpage.cpp:154
msgid "Poster"
msgstr "海報"

#: kpposterpage.cpp:156
msgid "&Print poster"
msgstr "列印海報(&P)"

#: kpposterpage.cpp:170
msgid "Poste&r size:"
msgstr "海報大小(&P)："

#: kpposterpage.cpp:172
msgid "Media size:"
msgstr "媒體大小(&P)："

#: kpposterpage.cpp:174
msgid "Pri&nt size:"
msgstr "列印大小(&N)："

#: kpposterpage.cpp:181
#, no-c-format
msgid "C&ut margin (% of media):"
msgstr "裁剪邊界(媒體的百分比)(&U)："

#: kpposterpage.cpp:185
msgid "&Tile pages (to be printed):"
msgstr "並排(要列印的)頁面(&T)："

#: kpposterpage.cpp:192
msgid "Link/unlink poster and print size"
msgstr "連結/解除連結海報和列印大小"

#: kpposterpage.cpp:257
msgid "Unknown"
msgstr "未知"

#: kpqtpage.cpp:70
msgid ""
"   Selection of color mode: You can choose between 2 options:  "
"
        • Color and
          •   
        • Grayscale
          Note: "
"This selection field may be grayed out and made inactive.  This happens if "
"TDEPrint can not retrieve  enough information about your print file. In this "
"case the embedded color- or grayscale information  of your printfile, and "
"the default handling of the printer take precedence.          "
msgstr ""
"選取顏色模式您有兩種選擇： 
           
        • 顏色
          •  
        • 灰階
         "
"注意：如果 TDEPrint 無法從您的列印檔案中取得足夠的資訊，這個選項可能被"
"關閉，此時會使用您列印檔案中內嵌的顏色或灰階資訊，還有預設的行為選項。        "

#: kpqtpage.cpp:79
msgid ""
"   Selection of page size: Select paper size to be printed on "
"from  the drop-down menu.  
        The exact list of choices depends on the "
"printer driver (\"PPD\") you have installed.  "
msgstr ""
"選取紙張尺寸： 從下拉式選單中選取紙張的尺寸。 
        可用的選項依您安"
"裝使用的印表機伺服器提供而不同。"

#: kpqtpage.cpp:84
msgid ""
"   Selection of pages per sheet:  You can choose to print more "
"than one page onto each sheet of paper.  This is sometimes useful to save "
"paper.  
        Note 1: the page images get scaled down accordingly to "
"print 2 or 4 pages per sheet.  The page image does not get scaled if you "
"print 1 page per sheet (the default setting.).  
        Note 2: If you "
"select multiple pages per sheet here, the scaling and re-arranging is done  "
"by your printing system.  
        Note 3, regarding \"Other\": You cannot "
"really select Other as the number of  pages to print on one sheet."
"\"Other\" is checkmarked here for information purposes only.  
        To select "
"8, 9, 16 or other numbers of  pages per sheet:  
            
        •  go to the tab "
"headlined \"Filter\"
          •  
        •  enable the Multiple Pages per Sheet "
"filter 
          •  
        •  and configure it (bottom-most button on the right of the "
"\"Filters\" tab). 
          •  
                 "
msgstr ""
"選擇一張紙上有幾頁 您可以選擇在一張紙上印出超過一頁的文件。通常可"
"以節省紙張。 
        注意：列印的圖片會根據一張紙上頁數的多寡來決定要縮小多"
"少。如果選擇一張紙上印一頁（預設值）則不會做調整。
         
        注意：當您選"
"擇一張紙上印多頁時，列印系統會自動幫您調整大小。
         
        注意：您不能真"
"的使用「其他」的選項。那只是提供資訊用的。
         
        要選擇 8、9 或 16 張的話， "
"
           
        • 到「過濾器」頁中。
          •  
        • 開啟「單張多頁過濾器」。
          •  
        • 設定過"
"濾器。
        但是，有些印表機自己就有單張多頁的功能。這種情況下您最好"
"使用印表機自己的設定選項。如果您兩邊都使用此選項，印出來的結果可能不會是您想"
"要的
         
         
        進階使用者的額外提示：這個選項與以下的 CUPS 命令"
"列選項參數是一樣的： 
             -o number-up=...     # 例：\"2\" 或 \"4\"
        "

#: kpqtpage.cpp:102
msgid ""
"   Selection of image orientation: Orientation of the printed  "
"pageimage on your paper is controlled by the radio buttons. By default,  the "
"orientation is Portrait  
        You can select 2 alternatives:  
            "
"
        •  Portrait..Portrait is the default setting. 
          •   
        •  "
"Landscape. 
          •   
          The icon changes according to your "
"selection.         "
msgstr ""
"選擇圖片方向： 您可以選擇列印圖片的方向。預設為「縱向」"
"（Portrait）。 此外您還可以選擇「橫向」（Landscape）。圖示會根據您選擇的方向"
"不同而改變。"

#: kpqtpage.cpp:113
msgid "Print Format"
msgstr "列印格式"

#: kpqtpage.cpp:123
msgid "Color Mode"
msgstr "色彩模式"

#: kpqtpage.cpp:135
msgid "Colo&r"
msgstr "色彩(&R)"

#: kpqtpage.cpp:138
msgid "&Grayscale"
msgstr "灰階(&G)"

#: kpqtpage.cpp:151
msgid "Ot&her"
msgstr "其他(&H)"

#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
msgid "&Export..."
msgstr "匯出(&E)..."

#: kprintdialog.cpp:97
msgid ""
" Printer Location: The Location may describe where the "
"selected printer is located. The Location description is created by the "
"administrator of the print system (or may be left empty). "
msgstr ""
"印表機位置：「位置」是指印表機放置的位置。通常是由列印系統管理者來"
"填寫，當然也有可能是空白的。"

#: kprintdialog.cpp:102
msgid ""
" Printer Type:  The Type indicates your printer type. "
msgstr "印表機類型：「類型」指的是您的印表機類型。"

#: kprintdialog.cpp:104
msgid ""
" Printer State:  The State indicates the state of the "
"print queue on the print server (which could be your localhost). The state "
"may be 'Idle', 'Processing', 'Stopped', 'Paused' or similar. "
msgstr ""
"印表機狀態：「狀態」指的是印表機伺服器（有可能是您自己的主機）上印"
"表佇列的狀態。狀態可能包括：閒置、處理中、已停止等等。"

#: kprintdialog.cpp:108
msgid ""
" Printer Comment:  The Comment may describe the selected "
"printer. This comment is created by the administrator of the print system "
"(or may be left empty). "
msgstr ""
"印表機備註：「備註」是所選擇印表機的描述。通常是由列印系統管理者來"
"填寫，當然也有可能是空白的。"

#: kprintdialog.cpp:112
msgid ""
" Printer Selection Menu:  
        Use this combo box to select the "
"printer to which you want to print. Initially (if you run TDEPrint for the "
"first time), you may only find the   TDE special printers (which "
"save jobs to disk [as PostScript- or PDF-files], or deliver jobs via email "
"(as a PDF attachment). If you are missing a real printer, you need to... "
"
           
        • ...either create a local printer with the help of the TDE Add "
"Printer Wizard. The Wizard is available for the CUPS and RLPR printing "
"systems (click button to the left of the 'Properties' button),
          •  "
"
        • ...or try to connect to an existing remote CUPS print server. You can "
"connect by clicking the 'System Options' button below. A new dialog "
"opens: click on the 'CUPS server' icon: Fill in the information "
"required to use the remote server. 
          •   
         
        Note: It may "
"happen that you successfully connected to a remote CUPS  server and still do "
"not get a printer list. If this happens: force TDEPrint to  re-load its "
"configuration files. To reload the configuration files, either start "
"kprinter again, or use the  switch the print system away from CUPS and back "
"again once. The print system switch  can be made through a selection in the "
"drop-down menu at bottom of this dialog when  fully expanded). 
                  "
msgstr ""
"印表機選單： 
        這個選單能讓您選擇您要列印的印表機。如果您第一次啟"
"動 TDEPrint 或是尚未做任何設定，清單中可能只會有「TDE 特殊印表機」。這個印表"
"機是虛擬的，會將印表工作存成 PostScript 或 PDF 檔，也可以透過 E-mail 附檔方式"
"傳送出去。如果您要實體的印表機，您必須... 
           
        • 用「TDE 新增印表機精靈」來"
"產生本地印表機。新增印表機精靈必須是使用 CUPS 或 RLPR 列印系統才能使用，按下"
"「內容」左邊的小按鍵即可叫出。
          •  
        • 或是試著連接到遠端的 CUPS 印表伺服"
"器。您可以按下最底下的「系統選項」鍵。按下去後會跳出一個對話框，在左方選擇"
"「CUPS 伺服器」圖示，然後填入遠端伺服器及使用者等資訊即可。
         
        "
"注意：有可能在您成功連接到遠端 CUPS 伺服器後卻仍然無法取得印表機清單。如"
"果發生這種情形，請重新載入 TDEPrint 的設定檔。例如關閉後重新啟動 TDEPrint，或"
"是在底下的「目前使用的列印系統」選單，先切換到別的列印系統，再切回 CUPS 列印"
"系統。
        "

#: kprintdialog.cpp:137
msgid ""
" Print Job Properties:  
        This button opens a dialog where you "
"can make decisions regarding all supported print job options. "
msgstr ""
"印表工作內容： 
        這個按鈕會開啟一個對話框，您可以設定列印工作的各"
"種選項。"

#: kprintdialog.cpp:141
msgid ""
" Selective View on List of Printers: 
         This button reduces the "
"list of visible printers to a shorter, more convenient, pre-defined list. 
        This is particularly useful in enterprise environments with lots of "
"printers. The default is to show all printers.
         
        To create a "
"personal 'selective view list', click on the 'System Options' button at the bottom of this dialog. Then, in the new dialog, select "
"'Filter' (left column in the TDE Print Configuration "
"dialog) and setup your selection..
         
        Warning: Clicking this "
"button without prior creation of a personal  'selective view list' "
"will make all printers dissappear from the  view. (To re-enable all "
"printers, just click this button again.) 
                  "
msgstr ""
"切換印表機清單： 
        這個按鈕可以將印表機清單切換成另一組預先定義好"
"的，較短、較方便的清單。
         
        這個功能對那些在有很多印表機的環境下特別有"
"用。預設是會顯示所有的印表機。
         
        要產生自己的印表機清單，請按最底"
"下的「系統選項」鍵，並在左方點選「過濾器」。
         
        警告：如果您沒有預"
"先定義好自己的清單就按下這個鍵，清單上會變成沒有實體印表機。不過只要再按一次"
"就會切換為顯示所有的印表機。
        "

#: kprintdialog.cpp:154
msgid ""
"TDE Add Printer Wizard 
        This button starts the TDE Add "
"Printer Wizard.
         
        Use the Wizard (with \"CUPS\" or "
"\"RLPR\") to add locally defined printers to your system. 
         "
"
        Note: The TDE Add Printer Wizard does not work,  "
"and this button is disabled if you use  \"Generic LPD\", \"LPRng"
"\", or \"Print Through  an External Program\".) 
                  "
msgstr ""
"TDE 新增印表機精靈 
        這個按鈕會啟動「TDE 新增印表機精靈」。
         "
"
        如果您選擇 CUPS 或 RLPR 列印系統，您可以用這個精靈來新增本地印表機。
         "
"
        注意：「TDE 新增印表機精靈」在其他的列印系統下無法使用，按鈕也將失"
"效。
        "

#: kprintdialog.cpp:163
msgid ""
" External Print Command 
        Here you can enter any command that "
"would also print for you in  a konsole window. 
         Example: "
"
        a2ps -P <printername> --medium=A3
        .         "
msgstr ""
"外部列印命令 
        您可以在這裡輸入列印的指令。
         例如： "
"
        a2ps -P <printername> --medium=A3
                 "

#: kprintdialog.cpp:168
msgid ""
" Additional Print Job Options 
        This button shows or hides "
"additional printing options."
msgstr ""
"顯示/隱藏進階列印工作選項 
        這個按鈕會顯示或隱藏進階的列印工作選"
"項。"

#: kprintdialog.cpp:170
#, fuzzy
msgid ""
" System Options:  
        This button starts a new dialog where you "
"can adjust various settings of your printing system. Amongst them: 
        •  "
"Should \tDE applications embed all fonts into the PostScript they generate "
"for printing? 
        •  Should TDE use an external PostScript viewer like gv for print page previews? 
        •  Should TDEPrint use a local or a remote "
"CUPS server?, 
         and many more....          "
msgstr ""
"系統選項 
        這個按鈕會開啟一個對話框，您可以在這裡調整您的列印系統"
"的設定。例如： 
           
        • 是不是要讓 TDE 應用程式在產生列印工作時，將所有的字型"
"嵌入 PostScript 中？
          •  
        • TDE 是否要用外部的 PostScript 觀看軟體（如 gv）"
"來預覽列印？
          •  
        • TDEPrint 要用本地還是遠端的 CUPS 伺服器？
          •  ......等"
"等。"

#: kprintdialog.cpp:182
msgid ""
" Help: This button takes you to the complete TDEPrint Manual. "
msgstr "說明：這個按鈕會帶您到「TDEPrint 手冊」。"

#: kprintdialog.cpp:186
msgid ""
" Cancel: This button cancels your print job and quits the "
"kprinter dialog. "
msgstr ""
"取消：這個按鈕會取消您的列印工作，並離開 kprinter 視窗。"

#: kprintdialog.cpp:190
msgid ""
" Print: This button sends the job to the printing process. If you "
"are sending non-PostScript files, you may be asked if you want TDE to "
"convert the files into PostScript, or if you want your print subsystem (like "
"CUPS) to do this. "
msgstr ""
"列印：這個按鈕會送出列印工作。如果您送出的是非 PostScript 檔案，系"
"統會先詢問您是不是要將檔案轉成 PostScript，還是您要交給您的列印子系統（如 "
"CUPS）來進行轉換的工作。"

#: kprintdialog.cpp:196
msgid ""
" Keep Printing Dialog Open
          If you enable this checkbox, the "
"printing dialog stays open after you hit the Print button.
           
           "
"This is especially useful, if you need to test various print settings (like "
"color matching for an inkjet printer) or if you want to send your job to "
"multiple printers (one after the other) to have it finished more quickly. "
msgstr ""
"列印過程中顯示這個對話方塊 
          如果您開啟此選項，按下「列印」鍵後，"
"這個視窗仍然會保持開啟。
           
          如果您是在測試不同的列印設定，如顏色調整，或"
"是您要將一份列印工作分別送到不同的印表機去，這個選項就很有用。
          "

#: kprintdialog.cpp:206
msgid ""
" Output File Name and Path: The \"Output file:\" shows  you where "
"your file will be saved if you decide to \"Print to File\" your job, using "
"one of the TDE Special Printers named \"Print to File "
"(PostScript)\" or \"Print to File (PDF)\". Choose a name and location that "
"suits your need by using the button and/or editing the line on the right. "
msgstr ""
"輸出檔案：這裡讓您填入您的列印工作要儲存到哪個路徑哪個檔案中。您可"
"以用右邊的小按鍵來瀏覽目錄與檔案。"

#: kprintdialog.cpp:214
msgid ""
" Output File Name and Path: Edit this line to create a  path and "
"filename that suits your needs. (Button and Lineedit field are only "
"available if you \"Print to File\") "
msgstr "輸出檔案：您可以在這裡填入您要儲存的路徑與檔名。"

#: kprintdialog.cpp:219
msgid ""
" Browse Directories button: This button calls  the \"File Open / "
"Browsed Directories\" dialog to let you choose a directory and file name "
"where your \"Print-to-File\" job should be saved. "
msgstr ""
"瀏覽目錄：這個按鈕會呼叫「開啟檔案」對話框，讓您選擇要儲存的目錄與"
"檔案。"

#: kprintdialog.cpp:225
msgid ""
" Add File to Job 
          This button calls the \"File Open / Browse "
"Directories\" dialog to allow you to select a file for printing. Note, that  "
"
          • you can select ASCII or International Text, PDF, PostScript, JPEG, "
"TIFF, PNG, GIF and many other graphical formats. 
          • you can select various "
"files from different paths and send them as one \"multi-file job\" to the "
"printing system. 
                     "
msgstr ""
"新增列印檔案 
          這個按鈕會叫出「開啟檔案」對話框，讓您選擇您要列印"
"的檔案。注意： 
             
          • 您可以選擇文字檔、PDF、PostScript、JPEG、TIFF、PNG、"
"GIF 及其他許多圖片格式的檔案。
          • 您也可以從不同路徑選擇多個檔案，變成一"
"個「多重檔案列印工作」並送到列印系統。
            •  
          "

#: kprintdialog.cpp:237
msgid ""
" Print Preview Enable this checkbox if you want to see a preview "
"of your printout. A preview lets you check if, for instance, your intended "
"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting "
"paper first. It also lets you cancel the job if something looks wrong.  "
"
          Note: The preview feature (and therefore this checkbox)  is only "
"visible for printjobs created from inside TDE applications.  If you start "
"kprinter from the commandline, or if you use kprinter  as a print command "
"for non-TDE applications (like Acrobat Reader,  Firefox or OpenOffice), "
"print preview is not available here.  "
msgstr ""
"預覽列印開啟這個選項的話，您會先預覽列印的結果。您可以確認列印出來"
"的效果如何。 
          注意：這個預覽列印的功能及選項只在您是透過 TDE 應用程"
"式送出列印工作時才有效。如果您是直接從命令列啟動 kprinter，或是您用 kprinter "
"做為非 TDE 應用程式（如 Acrobat Reader 或 FireFox 等）列印介面，則無法使用預"
"覽列印功能。"

#: kprintdialog.cpp:250
msgid ""
" Set as Default Printer This button sets the current printer as "
"the user's default.  
          Note: (Button is only visible if the checkbox "
"for  System Options --> General --> Miscellaneous: \"Defaults to the last printer used in the application\" is "
"disabled.) "
msgstr ""
"設成預設印表機這個按鈕會將目前的印表機設成使用者預設的印表機。 "
"
          注意：這個選項只在您把「系統選項」→「一般」→「預設使用該應用程式中"
"上一次使用的印表機」這個選項關閉時才會出現。
          "

#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90
#: management/smbview.cpp:43
msgid "Printer"
msgstr "印表機"

#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56
#: management/kxmlcommanddlg.cpp:114
msgid "&Name:"
msgstr "名稱(&N)："

#: kprintdialog.cpp:280 management/kminfopage.cpp:50
msgid ""
"_: Status\n"
"State:"
msgstr "狀態："

#: kprintdialog.cpp:282 management/kminfopage.cpp:48
msgid "Type:"
msgstr "類型："

#: kprintdialog.cpp:284 management/kmwname.cpp:40
msgid "Location:"
msgstr "位置："

#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176
msgid "Comment:"
msgstr "備註："

#: kprintdialog.cpp:289
msgid "P&roperties"
msgstr "內容"

#: kprintdialog.cpp:291
msgid "System Op&tions"
msgstr "系統選項(&T)"

#: kprintdialog.cpp:293
msgid "Set as &Default"
msgstr "設為預設印表機(&D)"

#: kprintdialog.cpp:300
msgid "Toggle selective view on printer list"
msgstr "切換印表機清單"

#: kprintdialog.cpp:305
msgid "Add printer..."
msgstr "新增印表機..."

#: kprintdialog.cpp:313
msgid "Previe&w"
msgstr "預覽(&W)"

#: kprintdialog.cpp:315
msgid "O&utput file:"
msgstr "輸出檔案(&U)："

#: kprintdialog.cpp:321
msgid "Print co&mmand:"
msgstr "列印命令(&M)："

#: kprintdialog.cpp:330
msgid "Show/hide advanced options"
msgstr "顯示/隱藏進階選項"

#: kprintdialog.cpp:332
msgid "&Keep this dialog open after printing"
msgstr "列印過程中顯示這個對話方塊(&K)"

#: kprintdialog.cpp:551 kprintdialog.cpp:939
msgid "An error occurred while retrieving the printer list:"
msgstr "接收印表機清單時發生錯誤："

#: kprintdialog.cpp:715
msgid "The output filename is empty."
msgstr "輸出檔案名稱是空的。"

#: kprintdialog.cpp:754
msgid "You don't have write permissions to this file."
msgstr "您沒有權限寫入該檔案。"

#: kprintdialog.cpp:760
msgid "The output directory does not exist."
msgstr "輸出檔案的路徑不存在。"

#: kprintdialog.cpp:762
msgid "You don't have write permissions in that directory."
msgstr "您沒有權限寫入該目錄。"

#: kprintdialog.cpp:874
msgid "&Options <<"
msgstr "簡易選項(&O)"

#: kprintdialog.cpp:887
msgid "&Options >>"
msgstr "進階選項(&O)"

#: kprintdialog.cpp:929
msgid "Initializing printing system..."
msgstr "正在初始化列印系統..."

#: kprintdialog.cpp:965
msgid "Print to File"
msgstr "列印至檔案"

#: kprinter.cpp:280
msgid "Initialization..."
msgstr "初始化..."

#: kprinter.cpp:283 kprinter.cpp:909
#, c-format
msgid "Generating print data: page %1"
msgstr "正在產生列印資料：第 %1 頁"

#: kprinter.cpp:429
msgid "Previewing..."
msgstr "預覽中..."

#: kprinter.cpp:690 tdeprintd.cpp:158
#, c-format
msgid ""
"
          A print error occurred. Error message received from system:
          %1"
msgstr "
          發生了列印錯誤。系統傳來的錯誤訊息：

          %1"

#: kprinterimpl.cpp:156
msgid "Cannot copy multiple files into one file."
msgstr "無法將多個檔案拷貝到單一個檔案。"

#: kprinterimpl.cpp:165
msgid "Cannot save print file to %1. Check that you have write access to it."
msgstr "無法儲存列印檔至 %1。請檢查您是否有寫入的權限。"

#: kprinterimpl.cpp:233
#, c-format
msgid "Printing document: %1"
msgstr "正在列印文件： %1"

#: kprinterimpl.cpp:251
#, c-format
msgid "Sending print data to printer: %1"
msgstr "正在傳送列印資料到印表機：%1"

#: kprinterimpl.cpp:279
msgid "Unable to start child print process. "
msgstr "無法啟動子列印程序。"

#: kprinterimpl.cpp:281
msgid ""
"The TDE print server (tdeprintd) could not be contacted. Check that "
"this server is running."
msgstr ""
"無法聯繫 TDE 列印伺服器 (tdeprintd)。請檢查此伺服器程式是否正在執行。"

#: kprinterimpl.cpp:283
msgid ""
"_: 1 is the command that  is given to\n"
"Check the command syntax:\n"
"%1 "
msgstr ""
"請檢查此命令語法：\n"
"%1 <檔案>"

#: kprinterimpl.cpp:290
msgid "No valid file was found for printing. Operation aborted."
msgstr "找不到有效可供列印的檔案。執行作業取消。"

#: kprinterimpl.cpp:325
msgid ""
"
          Unable to perform the requested page selection. The filter psselect cannot be inserted in the current filter chain. See Filter tab in "
"the printer properties dialog for further information.
          "
msgstr ""
"
          無法執行請求的頁面選擇。過濾器 psselect 無法插入目前的的過濾器鏈。"
"請閱讀印表機屬性對話方塊中的 [過濾器] 項目以獲得更多資訊。
          "

#: kprinterimpl.cpp:355
msgid "
          Could not load filter description for %1.
          "
msgstr "
          無法載入 %1 的過濾器描述。
          "

#: kprinterimpl.cpp:371
msgid ""
"
          Error while reading filter description for %1. Empty command line "
"received.
          "
msgstr "
          讀取 %1 的過濾器描述說明時失敗。接收到空的命令列資料。
          "

#: kprinterimpl.cpp:385
msgid ""
"The MIME type %1 is not supported as input of the filter chain (this may "
"happen with non-CUPS spoolers when performing page selection on a non-"
"PostScript file). Do you want TDE to convert the file to a supported format?"
"
          "
msgstr ""
"%1 這個 MIME 類型未支援作為資料輸入的過濾器。您希望 TDE 能夠將這個檔案轉換成"
"為支援的格式嗎？
          "

#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
msgid "Convert"
msgstr "轉換"

#: kprinterimpl.cpp:399
msgid "Select MIME Type"
msgstr "選取 MIME 類型"

#: kprinterimpl.cpp:400
msgid "Select the target format for the conversion:"
msgstr "選取轉換的目的格式："

#: kprinterimpl.cpp:404 kprinterimpl.cpp:430
msgid "Operation aborted."
msgstr "作業放棄。"

#: kprinterimpl.cpp:410
msgid "No appropriate filter found. Select another target format."
msgstr "找不到合適的過濾器。請選擇另外一個目的格式。"

#: kprinterimpl.cpp:423
msgid ""
"Operation failed with message:
          %1
          Select another target format."
msgstr "作業放棄，訊息：
          %1
          選取另外一個目的格式。          "

#: kprinterimpl.cpp:441
msgid "Filtering print data"
msgstr "正在過濾列印資料"

#: kprinterimpl.cpp:445
msgid "Error while filtering. Command was: %1."
msgstr "在過濾時出錯。命令為： %1。"

#: kprinterimpl.cpp:487
msgid "The print file is empty and will be ignored:
          %1
          "
msgstr "此檔案是空的，因此不會被列印：
          %1
          "

#: kprinterimpl.cpp:497
msgid ""
"The file format  %1  is not directly supported by the current "
"print system. You now have 3 options: 
             
          •  TDE can attempt to convert "
"this file automatically to a supported format. (Select Convert) 
          •  You can try to send the file to the printer without any conversion. "
"(Select Keep) 
          •  You can cancel the printjob. (Select "
"Cancel) 
           Do you want TDE to attempt and convert this file "
"to %2?          "
msgstr ""
"目前使用的列印系統不直接支援 %1 的檔案格式。您有三個選擇： 
             
          • TDE "
"可以嘗試將該文件自動轉換到一個被支援的格式（選擇「轉換」）。
            •  
          • 您也可"
"以嘗試不經過轉換就直接送給印表機列印（選擇「保留」）。
            •  
          • 您還可以取消"
"這個列印工作（選擇「取消」）。
          您想讓 TDE 嘗試轉換該檔案成為 %2 嗎？"
"          "

#: kprinterimpl.cpp:510 management/kmwname.cpp:62
msgid "Keep"
msgstr "保留"

#: kprinterimpl.cpp:518
msgid ""
"No appropriate filter was found to convert the file format %1 into %2."
"
          • Go to System Options -> Commands to look through the list "
"of possible filters. Each filter executes an external program.
          •  See "
"if the required external program is available.on your system.
          "
msgstr ""
"沒有適當的過濾器可以將檔案格式 %1 轉換為 %2。 
             
          • 您可以到「系統"
"選項」→「命令」去看看可用的過濾器清單。每一個過濾器都會執行一個外部程式。 
          • 您也可以看看您的系統中有沒有可用的外部程式。
          "

#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138
msgid "Printer Configuration"
msgstr "印表機設定"

#: kprinterpropertydialog.cpp:138
msgid "No configurable options for that printer."
msgstr "此印表機沒有可供設定的選項。"

#: kprintpreview.cpp:140
msgid "Do you want to continue printing anyway?"
msgstr "您還要繼續列印嗎？"

#: kprintpreview.cpp:148 kprintpreview.cpp:227
msgid "Print Preview"
msgstr "預覽列印"

#: kprintpreview.cpp:278
msgid ""
"The preview program %1 cannot be found. Check that the program is correctly "
"installed and located in a directory included in your PATH environment "
"variable."
msgstr ""
"找不到處理 %1 預覽程式。請檢查該程式有正確安裝，並且能夠直接在 PATH環境變數所"
"指定的目錄內尋找到。"

#: kprintpreview.cpp:303
msgid ""
"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor "
"any other external PostScript viewer could be found."
msgstr ""
"預覽失敗：無法找到內建的 TDE PostScript 檢視程式 (KGhostView) 或其他外部的 "
"PostScript 檢視程式。"

#: kprintpreview.cpp:307
#, c-format
msgid ""
"Preview failed: TDE could not find any application to preview files of type "
"%1."
msgstr "預覽失敗：TDE 找不到任何應用程式來預覽 %1 型態的檔案。"

#: kprintpreview.cpp:317
#, c-format
msgid "Preview failed: unable to start program %1."
msgstr "預覽失敗： 無法啟動 %1 程式。"

#: kprintpreview.cpp:322
msgid "Do you want to continue printing?"
msgstr "您還要繼續列印嗎？"

#: kprintprocess.cpp:75
msgid "File transfer failed."
msgstr "檔案傳輸失敗。"

#: kprintprocess.cpp:81
msgid "Abnormal process termination (%1)."
msgstr "不正常程序中斷 (%1)。"

#: kprintprocess.cpp:83
msgid "%1: execution failed with message:
          %2
          "
msgstr "%1： 執行失敗，錯誤訊息為： 
          %2
          "

#: kxmlcommand.cpp:789
msgid "One of the command object's requirements is not met."
msgstr "有一個命令物件的要求項目尚未達成。"

#: kxmlcommand.cpp:797 kxmlcommand.cpp:802
#, c-format
msgid "The command does not contain the required tag %1."
msgstr "這個命令並沒有包含所需要的 %1 標記。"

#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53
msgid ""
"The %1 executable could not be found in your path. Check your "
"installation."
msgstr "在您的搜尋路徑中找不到 %1 檔案，請檢查安裝是否正確。"

#: lpd/kmlpdmanager.cpp:87
msgid "Local printer queue (%1)"
msgstr "本地印表機佇列 (%1)"

#: lpd/kmlpdmanager.cpp:87
msgid ""
"_: Unknown type of local printer queue\n"
"Unknown"
msgstr "不明的佇列類型"

#: lpd/kmlpdmanager.cpp:88
msgid ""
msgstr "<無法存取>"

#: lpd/kmlpdmanager.cpp:89
msgid ""
"_: Unknown Driver\n"
"Unknown"
msgstr "未知的驅動程式"

#: lpd/kmlpdmanager.cpp:95
msgid "Remote LPD queue %1@%2"
msgstr "遠端 LPD 佇列 %1@%2"

#: lpd/kmlpdmanager.cpp:158
msgid "Unable to create spool directory %1 for printer %2."
msgstr "無法建立 %2 印表機所使用的 %1 佇列目錄。"

#: lpd/kmlpdmanager.cpp:165
msgid "Unable to save information for printer %1."
msgstr "無法儲存 %1 的印表機資訊。"

#: lpd/kmlpdmanager.cpp:193
msgid ""
"Unable to set correct permissions on spool directory %1 for printer %2."
msgstr "無法設定 %2 印表機所使用的 %1 佇列目錄的權限。"

#: lpd/kmlpdmanager.cpp:237
msgid "Permission denied: you must be root."
msgstr "權限錯誤： 您必須是 root。"

#: lpd/kmlpdmanager.cpp:244
msgid "Unable to execute command \"%1\"."
msgstr "無法執行指令 \"%1\"。"

#: lpd/kmlpdmanager.cpp:317
msgid "Unable to write printcap file."
msgstr "無法寫入列印表頭檔案"

#: lpd/kmlpdmanager.cpp:372
msgid "Couldn't find driver %1 in printtool database."
msgstr "在 printtool 資料庫中無法找到 %1 驅動程式。"

#: lpd/kmlpdmanager.cpp:411
msgid "Couldn't find printer %1 in printcap file."
msgstr "在列印表頭中無法找到 %1 印表機。"

#: lpd/kmlpdmanager.cpp:440
msgid "No driver found (raw printer)"
msgstr "無法找到驅動程式 (raw 印表機)"

#: lpd/kmlpdmanager.cpp:442
msgid "Printer type not recognized."
msgstr "印表機類型無法辨認。"

#: lpd/kmlpdmanager.cpp:452
msgid ""
"The driver device %1 is not compiled in your GhostScript "
"distribution. Check your installation or use another driver."
msgstr ""
"您系統所使用的 GhostScript 軟體尚未支援這個驅動程式裝置 %1。請檢查您的"
"安裝是否正確，或使用其他的驅動程式。"

#: lpd/kmlpdmanager.cpp:560
msgid "Unable to write driver associated files in spool directory."
msgstr "無法在佇列目錄中寫入驅動程式相關檔案。"

#: lpd/kmlpduimanager.cpp:44
msgid "Local printer (parallel, serial, USB)"
msgstr "本地印表機 (並列埠、串列埠、USB)"

#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68
#: rlpr/kmwrlpr.cpp:116
msgid "Remote LPD queue"
msgstr "遠端 LPD 佇列"

#: lpd/kmlpduimanager.cpp:46
msgid "SMB shared printer (Windows)"
msgstr "SMB 分享印表機 (Windows)"

#: lpd/kmlpduimanager.cpp:47
msgid "Network printer (TCP)"
msgstr "網路印表機 (TCP)"

#: lpd/kmlpduimanager.cpp:48
msgid "File printer (print to file)"
msgstr "檔案印表機 (列印成檔案... 通常是 PS 檔)"

#: lpd/lpdtools.cpp:31
msgid "A4"
msgstr "A4"

#: lpd/lpdtools.cpp:32
msgid "A3"
msgstr "A3"

#: lpd/lpdtools.cpp:33
msgid "B4"
msgstr "B4"

#: lpd/lpdtools.cpp:34
msgid "B5"
msgstr "B5"

#: lpd/lpdtools.cpp:233
msgid "GhostScript settings"
msgstr "GhostScript 設定"

#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53
#: management/kmwend.cpp:104
msgid "Driver"
msgstr "驅動程式"

#: lpd/lpdtools.cpp:254
msgid "Resolution"
msgstr "解析度"

#: lpd/lpdtools.cpp:277
msgid "Color depth"
msgstr "彩度"

#: lpd/lpdtools.cpp:301
msgid "Additional GS options"
msgstr "額外的 GS 選項"

#: lpd/lpdtools.cpp:313
msgid "Page size"
msgstr "頁面大小"

#: lpd/lpdtools.cpp:329
msgid "Pages per sheet"
msgstr "每張紙上列印頁數"

#: lpd/lpdtools.cpp:345
msgid "Left/right margin (1/72 in)"
msgstr "左 / 右邊界 (1/72 英吋)"

#: lpd/lpdtools.cpp:350
msgid "Top/bottom margin (1/72 in)"
msgstr "頂 / 底 邊界 (1/72英吋)"

#: lpd/lpdtools.cpp:356
msgid "Text options"
msgstr "文字選項"

#: lpd/lpdtools.cpp:362
msgid "Send EOF after job to eject page"
msgstr "列印完成時用 EOF 指令退出列印成品"

#: lpd/lpdtools.cpp:370
msgid "Fix stair-stepping text"
msgstr "修正階梯狀文字"

#: lpd/lpdtools.cpp:382
msgid "Fast text printing (non-PS printers only)"
msgstr "快速文字列印 (只有非PS印表機才行)"

#: lpdunix/kmlpdunixmanager.cpp:210
msgid "Description unavailable"
msgstr "沒有描述"

#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271
#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380
#, c-format
msgid "Remote printer queue on %1"
msgstr "在 %1 上的遠端印表機佇列"

#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274
#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342
#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118
msgid "Local printer"
msgstr "本地印表機"

#: lpr/apshandler.cpp:68
msgid "APS Driver (%1)"
msgstr "APS 驅動程式 (%1)"

#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72
msgid "Network printer (%1)"
msgstr "網路印表機 (%1)"

#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276
#: lpr/matichandler.cpp:421
#, c-format
msgid "Unsupported backend: %1."
msgstr "不支援的後端介面： %1。"

#: lpr/apshandler.cpp:221
#, c-format
msgid "Unable to create directory %1."
msgstr "無法建立目錄 %1。"

#: lpr/apshandler.cpp:241
#, c-format
msgid "Missing element: %1."
msgstr "缺少元件：%1。"

#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323
#, c-format
msgid "Invalid printer backend specification: %1"
msgstr "指定不合法的印表機後端介面：%1"

#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367
#, c-format
msgid "Unable to create the file %1."
msgstr "無法建立檔案 %1。"

#: lpr/apshandler.cpp:322
msgid "The APS driver is not defined."
msgstr "APS 驅動程式尚未定義。"

#: lpr/apshandler.cpp:380
#, c-format
msgid "Unable to remove directory %1."
msgstr "無法移除目錄 %1。"

#: lpr/editentrydialog.cpp:40
msgid "Aliases:"
msgstr "別名："

#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107
msgid "String"
msgstr "字串"

#: lpr/editentrydialog.cpp:47
msgid "Number"
msgstr "數字"

#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111
msgid "Boolean"
msgstr "布林值"

#: lpr/editentrydialog.cpp:72
#, c-format
msgid "Printcap Entry: %1"
msgstr "Printcap 項目：%1"

#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37
msgid "Spooler"
msgstr "輸出緩衝區"

#: lpr/kmconfiglpr.cpp:34
msgid "Spooler Settings"
msgstr "輸出緩衝區設定"

#: lpr/kmlprjobmanager.cpp:83
msgid "Unsupported operation."
msgstr "不支援的作業。"

#: lpr/kmlprmanager.cpp:289
msgid "The printcap file is a remote file (NIS). It cannot be written."
msgstr "printcap 檔案是 NIS 分享出來的遠端檔案，該檔案無法被寫入。"

#: lpr/kmlprmanager.cpp:305
msgid ""
"Unable to save printcap file. Check that you have write permissions for that "
"file."
msgstr "無法儲存 printcap 檔案。請檢查您是否有寫入的權限。"

#: lpr/kmlprmanager.cpp:330
msgid "Internal error: no handler defined."
msgstr "內部錯誤：未定義處理程式。"

#: lpr/kmlprmanager.cpp:344
msgid "Couldn't determine spool directory. See options dialog."
msgstr "無法偵測出佇列的目錄位置。請查看選項對話方塊。"

#: lpr/kmlprmanager.cpp:350
msgid ""
"Unable to create the spool directory %1. Check that you have the required "
"permissions for that operation."
msgstr "您沒有權限寫入該 %1 列印佇列目錄。請檢視權限設定是否正確。"

#: lpr/kmlprmanager.cpp:382
#, c-format
msgid ""
"The printer has been created but the print daemon could not be restarted. %1"
msgstr "印表機已經建立，但是印表服務程式無法重新啟動。%1"

#: lpr/kmlprmanager.cpp:410
msgid ""
"Unable to remove spool directory %1. Check that you have write permissions "
"for that directory."
msgstr "無法移除列印佇列目錄 %1。請檢察您有該目錄的寫入權限。"

#: lpr/kmlprmanager.cpp:458
msgid "&Edit printcap Entry..."
msgstr "編輯 printcap 內容(&E)..."

#: lpr/kmlprmanager.cpp:473
msgid ""
"Editing a printcap entry manually should only be done by confirmed system "
"administrator. This may prevent your printer from working. Do you want to "
"continue?"
msgstr ""
"手動編輯 printcap 檔案內容應該最好由系統管理者確認該檔案內容無誤，如此列印工"
"作才能夠正常工作。您確定要繼續嗎？"

#: lpr/kmlprmanager.cpp:489
#, c-format
msgid "Spooler type: %1"
msgstr "多工緩衝處理程式類型： %1"

#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291
#: lpr/lpchelper.cpp:314
msgid "The executable %1 couldn't be found in your PATH."
msgstr "在執行路徑中找不到執行檔 %1。"

#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298
msgid "Permission denied."
msgstr "權限拒絕。"

#: lpr/lpchelper.cpp:259
msgid "Printer %1 does not exist."
msgstr "印表機 %1 不存在。"

#: lpr/lpchelper.cpp:263
#, c-format
msgid "Unknown error: %1"
msgstr "不明的錯誤： %1"

#: lpr/lpchelper.cpp:282
#, c-format
msgid "Execution of lprm failed: %1"
msgstr "執行 lprm 失敗：%1"

#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97
msgid "Unknown (unrecognized entry)"
msgstr "未知 (不認識的項目)"

#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91
msgid "Remote queue (%1) on %2"
msgstr "位於 %2 上的遠端佇列 (%1)"

#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86
#, c-format
msgid "Local printer on %1"
msgstr "本機印表機 %1"

#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116
msgid "Unrecognized entry."
msgstr "不認識的項目。"

#: lpr/lprngtoolhandler.cpp:99
msgid "IFHP Driver (%1)"
msgstr "IFHP 驅動程式 (%1)"

#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170
msgid "unknown"
msgstr "未知"

#: lpr/lprngtoolhandler.cpp:162
msgid "No driver defined for that printer. It might be a raw printer."
msgstr "這台印表機尚未定義驅動程式，也許是一台 raw 原始印表機。"

#: lpr/lprngtoolhandler.cpp:170
msgid "LPRngTool Common Driver (%1)"
msgstr "LPRngTool 通用驅動程式 (%1)"

#: lpr/matichandler.cpp:82
msgid "Network printer"
msgstr "網路印表機"

#: lpr/matichandler.cpp:245
msgid "Internal error."
msgstr "內部錯誤。"

#: lpr/matichandler.cpp:339
msgid ""
"You probably don't have the required permissions to perform that operation."
msgstr "您也許沒有權限來執行該項作業。"

#: lpr/matichandler.cpp:426
msgid ""
"Unable to find executable lpdomatic. Check that Foomatic is correctly "
"installed and that lpdomatic is installed in a standard location."
msgstr ""
"找不到 lpdomatic 該執行檔案。請確認系統已經有正確安裝上 Formatic 套件，並且確"
"認 lpdomatic 有安裝在標準的目錄內。"

#: lpr/matichandler.cpp:457
#, c-format
msgid "Unable to remove driver file %1."
msgstr "無法移除印表機驅動程式檔案 %1。"

#: management/kaddprinterwizard.cpp:10
msgid "Configure TDE Print"
msgstr "設定 TDE 列印"

#: management/kaddprinterwizard.cpp:11
msgid "Configure print server"
msgstr "設定列印伺服器"

#: management/kaddprinterwizard.cpp:18
msgid "Start the add printer wizard"
msgstr "啟動新增印表機精靈"

#: management/kmconfigcommand.cpp:33
msgid "Commands"
msgstr "命令"

#: management/kmconfigcommand.cpp:34
msgid "Command Settings"
msgstr "命令設定"

#: management/kmconfigcommand.cpp:37
msgid "Edit/Create Commands"
msgstr "編輯/建立命令"

#: management/kmconfigcommand.cpp:39
msgid ""
"
          Command objects perform a conversion from input to output.
          They are "
"used as the basis to build both print filters and special printers. They are "
"described by a command string, a set of options, a set of requirements and "
"associated mime types. Here you can create new command objects and edit "
"existing ones. All changes will only be effective for you."
msgstr ""
"
          命令物件執行一個由輸入到輸出的轉換。
          它們是用來建立列印過濾器以及特殊印"
"表機的基礎。他們是以一個命令字串、一組參數、一組需求以及特殊的 MIME 型別來定"
"義。在此您可建立新的命令物件以及編輯現有的物件。所有的修改只會影響您自己。"

#: management/kmconfigdialog.cpp:38
msgid "TDE Print Configuration"
msgstr "TDE 列印設定"

#: management/kmconfigfilter.cpp:40
msgid "Filter"
msgstr "過濾器"

#: management/kmconfigfilter.cpp:41
msgid "Printer Filtering Settings"
msgstr "印表機過濾器設定"

#: management/kmconfigfilter.cpp:44
msgid "Printer Filter"
msgstr "印表機過濾器"

#: management/kmconfigfilter.cpp:56
msgid ""
"The printer filtering allows you to view only a specific set of printers "
"instead of all of them. This may be useful when there are a lot of printers "
"available but you only use a few ones. Select the printers you want to see "
"from the list on the left or enter a Location filter (ex: Group_1*). "
"Both are cumulative and ignored if empty."
msgstr ""
"印表機過濾可以讓您檢視部分的印表機，而不是全部都顯示出來。在有很多印表機項目"
"時，而您只希望使用其中的幾台印表機時很有用。從左邊的列表中選擇您希望看到的印"
"表機，或者輸入一個位置過濾 (例如：Group_1*)。"

#: management/kmconfigfilter.cpp:62
msgid "Location filter:"
msgstr "過濾器位置："

#: management/kmconfigfonts.cpp:43
msgid "Font Settings"
msgstr "字型設定"

#: management/kmconfigfonts.cpp:46
msgid "Fonts Embedding"
msgstr "嵌入字型"

#: management/kmconfigfonts.cpp:47
msgid "Fonts Path"
msgstr "字型路徑"

#: management/kmconfigfonts.cpp:49
msgid "&Embed fonts in PostScript data when printing"
msgstr "列印時將 PostScript 字體嵌入在列印資料內(&E)"

#: management/kmconfigfonts.cpp:57
msgid "&Up"
msgstr "向上(&U)"

#: management/kmconfigfonts.cpp:58
msgid "&Down"
msgstr "下移(&D)"

#: management/kmconfigfonts.cpp:59
msgid "&Add"
msgstr "新增(&A)"

#: management/kmconfigfonts.cpp:61
msgid "Additional director&y:"
msgstr "其他目錄(&Y)："

#: management/kmconfigfonts.cpp:85
msgid ""
"These options will automatically put fonts in the PostScript file which are "
"not present on the printer. Font embedding usually produces better print "
"results (closer to what you see on the screen), but larger print data as "
"well."
msgstr ""
"這個選項將會把 PostScript 檔案內所需要的字體檔案直接嵌入於檔案內，當列印時若"
"是對方印表機檔案並沒有支援該字體時，還是能夠正常列印。將該檔案所需要的字體檔"
"案直接嵌入於檔案內時，通常會得到比較好的列印結果 (與螢幕上的顯示內容比較近"
"似)，但是缺點是檔案比較大，列印時間會稍微久一點。"

#: management/kmconfigfonts.cpp:89
msgid ""
"When using font embedding you can select additional directories where TDE "
"should search for embeddable font files. By default, the X server font path "
"is used, so adding those directories is not needed. The default search path "
"should be sufficient in most cases."
msgstr ""
"使用字型嵌入功能時，您可以選擇可嵌入字型的目錄供 TDE 搜尋。一般來說會使用 X "
"伺服器的字型路徑，所以通常不需要再額外選擇目錄。"

#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55
msgid "General Settings"
msgstr "一般設定"

#: management/kmconfiggeneral.cpp:48
msgid "Refresh Interval"
msgstr "更新間隔"

#: management/kmconfiggeneral.cpp:51
msgid " sec"
msgstr " 秒"

#: management/kmconfiggeneral.cpp:53
msgid ""
"This time setting controls the refresh rate of various TDE Print "
"components like the print manager and the job viewer."
msgstr ""
"該時間指定是用來設定 TDE 列印 元件內對於列印工作清單的顯示，要間隔多久"
"時間更新顯示目前的狀態。一般在列印管理員以及列印工作顯示器內都會用到該時間設"
"定"

#: management/kmconfiggeneral.cpp:57
msgid "Test Page"
msgstr "測試頁"

#: management/kmconfiggeneral.cpp:58
msgid "&Specify personal test page"
msgstr "指定個人的測試頁(&S)"

#: management/kmconfiggeneral.cpp:60
msgid "Preview..."
msgstr "預覽..."

#: management/kmconfiggeneral.cpp:70
msgid "Sho&w printing status message box"
msgstr "顯示列印狀態訊息方塊(&W)"

#: management/kmconfiggeneral.cpp:71
msgid "De&faults to the last printer used in the application"
msgstr "預設使用該應用程式中上一次使用的印表機(&F)"

#: management/kmconfiggeneral.cpp:127
msgid ""
"The selected test page is not a PostScript file. You may not be able to test "
"your printer anymore."
msgstr "您所選取的測試頁並不是一個 PostScript 檔案，所以測試工作無法繼續。"

#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60
msgid "Empty file name."
msgstr "空檔案名稱。"

#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59
msgid "Jobs"
msgstr "工作"

#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:718
msgid "Print Job Settings"
msgstr "列印工作設定"

#: management/kmconfigjobs.cpp:37
msgid "Jobs Shown"
msgstr "顯示的工作"

#: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:172
#: management/kmjobviewer.cpp:343
msgid "Unlimited"
msgstr "無限"

#: management/kmconfigjobs.cpp:42
msgid "Maximum number of jobs shown:"
msgstr "顯示工作最大數目："

#: management/kmconfigpreview.cpp:35
msgid "Preview"
msgstr "預覽"

#: management/kmconfigpreview.cpp:36
msgid "Preview Settings"
msgstr "預覽設定"

#: management/kmconfigpreview.cpp:39
msgid "Preview Program"
msgstr "預覽程式"

#: management/kmconfigpreview.cpp:41
msgid "&Use external preview program"
msgstr "使用外部的預覽程式(&U)"

#: management/kmconfigpreview.cpp:44
msgid ""
"You can use an external preview program (PS viewer) instead of the TDE built-"
"in preview system. Note that if the TDE default PS viewer (KGhostView) "
"cannot be found, TDE tries automatically to find another external PostScript "
"viewer"
msgstr ""
"您可以另外指定外部的預覽程式 (PS 檢視程式) 取代 TDE 內建的預覽程式。請注意一"
"下，TDE 的內建 PS 檢視程式 (KGhostView) 若是找不到的話，TDE 將會自動尋找外部"
"的 PostView 檢視程式。"

#: management/kmdbcreator.cpp:92
msgid ""
"No executable defined for the creation of the driver database. This "
"operation is not implemented."
msgstr "印表機驅動程式內尚未建立供印表列印執行檔。該功能尚未實作。"

#: management/kmdbcreator.cpp:95
msgid ""
"The executable %1 could not be found in your PATH. Check that this program "
"exists and is accessible in your PATH variable."
msgstr ""
"在搜尋的路徑目錄內找不到 %1 執行檔案。請確定該執行檔案有正確安裝，以及能夠在 "
"PATH 變數路徑內所找到。"

#: management/kmdbcreator.cpp:99
msgid ""
"Unable to start the creation of the driver database. The execution of %1 "
"failed."
msgstr "無法起始建立驅動程式資料庫。執行 %1 程式失敗。"

#: management/kmdbcreator.cpp:113
msgid "Please wait while TDE rebuilds a driver database."
msgstr "請稍後... TDE正在重新建立驅動程式資料庫。"

#: management/kmdbcreator.cpp:114
msgid "Driver Database"
msgstr "驅動程式資料庫"

#: management/kmdbcreator.cpp:171
msgid ""
"Error while creating driver database: abnormal child-process termination."
msgstr "建立驅動程式資料庫時發生錯誤，子程序異常結束。"

#: management/kmdriverdbwidget.cpp:51
msgid "&PostScript printer"
msgstr "PostScript 印表機(&P)"

#: management/kmdriverdbwidget.cpp:52
msgid "&Raw printer (no driver needed)"
msgstr "Raw 印表機 [不需驅動程式](&R)"

#: management/kmdriverdbwidget.cpp:55
msgid "&Other..."
msgstr "其他(&O)..."

#: management/kmdriverdbwidget.cpp:56
msgid "&Manufacturer:"
msgstr "生產廠商(&M)："

#: management/kmdriverdbwidget.cpp:57
msgid "Mo&del:"
msgstr "型號(&D)："

#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166
msgid "Loading..."
msgstr "載入..."

#: management/kmdriverdbwidget.cpp:217
msgid "Unable to find the PostScript driver."
msgstr "無法找到 PostScript 驅動程式。"

#: management/kmdriverdbwidget.cpp:230
msgid "Select Driver"
msgstr "選擇驅動程式"

#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249
msgid ""
msgstr "<未知>"

#: management/kmdriverdbwidget.cpp:252
msgid "Database"
msgstr "資料庫"

#: management/kmdriverdbwidget.cpp:259
msgid "Wrong driver format."
msgstr "錯誤的驅動程式格式。"

#: management/kmdriverdbwidget.cpp:268
msgid "Other"
msgstr "其他"

#: management/kmdriverdialog.cpp:48
msgid ""
"Some options are in conflict. You must resolve those conflicts before "
"continuing."
msgstr "部分選定的選項相衝突。您必須在繼續之前解決這些衝突。"

#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38
msgid ""
"_: Physical Location\n"
"Location:"
msgstr "位置："

#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39
#: management/kmwname.cpp:41
msgid "Description:"
msgstr "描述："

#: management/kminfopage.cpp:54 management/kminfopage.cpp:93
#: tools/escputil/escpwidget.cpp:101
msgid "Device:"
msgstr "裝置："

#: management/kminfopage.cpp:56
msgid "Model:"
msgstr "型號："

#: management/kminfopage.cpp:92
msgid "Members:"
msgstr "成員："

#: management/kminfopage.cpp:112
msgid "Implicit class"
msgstr "隱含類別"

#: management/kminfopage.cpp:114
msgid "Remote class"
msgstr "遠端類別"

#: management/kminfopage.cpp:115
msgid "Local class"
msgstr "本地類別"

#: management/kminfopage.cpp:117
msgid "Remote printer"
msgstr "遠端印表機"

#: management/kminfopage.cpp:120
msgid "Special (pseudo) printer"
msgstr "特殊 (假的) 印表機"

#: management/kminfopage.cpp:121
msgid ""
"_: Unknown class of printer\n"
"Unknown"
msgstr "未知類別"

#: management/kminstancepage.cpp:61
msgid ""
"Define/Edit here instances for the current selected printer. An instance is "
"a combination of a real (physical) printer and a set of predefined options. "
"For a single InkJet printer, you could define different print formats like "
"DraftQuality, PhotoQuality or TwoSided. Those instances "
"appear as normal printers in the print dialog and allow you to quickly "
"select the print format you want."
msgstr ""
"您可以在這裏定義/設定所選取的印表機實體。所謂的實體指的是印表機及其預先定義好"
"的設定選項的組合。比方以一台噴墨印表機來說，您可以選擇使用 草稿品質、"
"相片品質 或 雙面列印 等等功能。這些實體在列印對話方塊以一般印表"
"機的型式出現，可以讓您快速的在列印之前選擇所要列印品質等相關項目。"

#: management/kminstancepage.cpp:87
msgid "New..."
msgstr "新增..."

#: management/kminstancepage.cpp:88
msgid "Copy..."
msgstr "複製..."

#: management/kminstancepage.cpp:92
msgid "Settings"
msgstr "設定"

#: management/kminstancepage.cpp:94
msgid "Test..."
msgstr "測試..."

#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126
#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145
#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164
#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190
#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210
#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260
msgid "(Default)"
msgstr "(預設)"

#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Instance Name"
msgstr "實體名稱"

#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Enter name for new instance (leave untouched for default):"
msgstr "輸入一個新的實體名稱 (預設值是不管這個選項)："

#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187
msgid "Instance name must not contain any spaces or slashes."
msgstr "實體名稱不該有空白或斜線。"

#: management/kminstancepage.cpp:161
msgid "Do you really want to remove instance %1?"
msgstr "您確定要刪除實體 %1？"

#: management/kminstancepage.cpp:161
msgid ""
"You can't remove the default instance. However all settings of %1 will be "
"discarded. Continue?"
msgstr ""
"您不能移除預設的替代名稱，無論如何所有的 %1 設定都會被丟棄。確定要繼續嗎？"

#: management/kminstancepage.cpp:213
#, c-format
msgid "Unable to find instance %1."
msgstr "找不到實體 %1。"

#: management/kminstancepage.cpp:215
#, c-format
msgid ""
"Unable to retrieve printer information. Message from printing system: %1."
msgstr "無法接收印表機資訊。列印系統傳回的訊息為：%1。"

#: management/kminstancepage.cpp:232
msgid "The instance name is empty. Please select an instance."
msgstr "實體名稱是空白的。請選擇一個實體。"

#: management/kminstancepage.cpp:264
msgid "Internal error: printer not found."
msgstr "內部錯誤：找不到印表機。"

#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "You are about to print a test page on %1. Do you want to continue?"
msgstr "您打算要在 %1 列印測試頁。是否要繼續呢？"

#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "Print Test Page"
msgstr "列印測試頁"

#: management/kminstancepage.cpp:268
#, c-format
msgid "Unable to send test page to %1."
msgstr "無法在 %1 列印測試頁。"

#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632
#, c-format
msgid "Test page successfully sent to printer %1."
msgstr "測試頁已經成功的送到 %1 印表機。"

#: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:160
msgid "No Printer"
msgstr "沒有印表機"

#: management/kmjobviewer.cpp:140 management/kmjobviewer.cpp:179
#: management/kmjobviewer.cpp:196 management/kmjobviewer.cpp:212
#: management/kmjobviewer.cpp:363 management/kmjobviewer.cpp:562
msgid "All Printers"
msgstr "全部印表機"

#: management/kmjobviewer.cpp:153
#, c-format
msgid "Print Jobs for %1"
msgstr "%1 的列印工作"

#: management/kmjobviewer.cpp:172 management/kmjobviewer.cpp:174
#: management/kmjobviewer.cpp:343
#, c-format
msgid "Max.: %1"
msgstr "最大值： %1"

#: management/kmjobviewer.cpp:237
msgid "Job ID"
msgstr "列印工作 ID"

#: management/kmjobviewer.cpp:238
msgid "Owner"
msgstr "擁有者"

#: management/kmjobviewer.cpp:240
msgid ""
"_: Status\n"
"State"
msgstr "狀態"

#: management/kmjobviewer.cpp:241
msgid "Size (KB)"
msgstr "大小 (KB)"

#: management/kmjobviewer.cpp:242
msgid "Page(s)"
msgstr "頁"

#: management/kmjobviewer.cpp:264
msgid "&Hold"
msgstr "暫停(&H)"

#: management/kmjobviewer.cpp:265
msgid "&Resume"
msgstr "恢復(&R)"

#: management/kmjobviewer.cpp:266
msgid "Remo&ve"
msgstr "移除(&V)"

#: management/kmjobviewer.cpp:267
msgid "Res&tart"
msgstr "重新啟動(&T)"

#: management/kmjobviewer.cpp:268
msgid "&Move to Printer"
msgstr "移至印表機(&M)"

#: management/kmjobviewer.cpp:274
msgid "&Toggle Completed Jobs"
msgstr "切換完成的列印工作(&T)"

#: management/kmjobviewer.cpp:277
msgid "Show Only User Jobs"
msgstr "只顯示使用者的列印工作"

#: management/kmjobviewer.cpp:278
msgid "Hide Only User Jobs"
msgstr "只隱藏使用者的列印工作"

#: management/kmjobviewer.cpp:286
msgid "User Name"
msgstr "使用者名稱"

#: management/kmjobviewer.cpp:303
msgid "&Select Printer"
msgstr "選取印表機(&S)"

#: management/kmjobviewer.cpp:332
msgid "Refresh"
msgstr "更新"

#: management/kmjobviewer.cpp:336
msgid "Keep window permanent"
msgstr "永遠保持視窗"

#: management/kmjobviewer.cpp:493
msgid ""
"Unable to perform action \"%1\" on selected jobs. Error received from "
"manager:"
msgstr "無法選取的列印工作上進行 \"%1\" 動作。由管理程式傳回錯誤資訊："

#: management/kmjobviewer.cpp:505
msgid "Hold"
msgstr "暫停"

#: management/kmjobviewer.cpp:510
msgid "Resume"
msgstr "恢復"

#: management/kmjobviewer.cpp:520
msgid "Restart"
msgstr "還原"

#: management/kmjobviewer.cpp:528
#, c-format
msgid "Move to %1"
msgstr "移至 %1"

#: management/kmjobviewer.cpp:693
msgid "Operation failed."
msgstr "作業失敗。"

#: management/kmlistview.cpp:125
msgid "Print System"
msgstr "列印系統"

#: management/kmlistview.cpp:128
msgid "Classes"
msgstr "類別"

#: management/kmlistview.cpp:131
msgid "Printers"
msgstr "印表機"

#: management/kmlistview.cpp:134
msgid "Specials"
msgstr "特殊項目"

#: management/kmmainview.cpp:72
msgid ""
"The printer %1 already exists. Continuing will overwrite existing printer. "
"Do you want to continue?"
msgstr "印表機 %1 已經存在。若是繼續將會蓋掉目前存在的印表機。您確定要繼續嗎？"

#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
msgid "Initializing manager..."
msgstr "初始化管理員..."

#: management/kmmainview.cpp:180
msgid "&Icons,&List,&Tree"
msgstr "圖示(&I),列表(&L),樹狀圖(&T)"

#: management/kmmainview.cpp:184
msgid "Start/Stop Printer"
msgstr "啟動/停止印表機"

#: management/kmmainview.cpp:186
msgid "&Start Printer"
msgstr "啟動印表機(&S)"

#: management/kmmainview.cpp:187
msgid "Sto&p Printer"
msgstr "停止印表機(&P)"

#: management/kmmainview.cpp:189
msgid "Enable/Disable Job Spooling"
msgstr "開啟/關閉列印工作佇列"

#: management/kmmainview.cpp:191
msgid "&Enable Job Spooling"
msgstr "開啟列印工作佇列(&E)"

#: management/kmmainview.cpp:192
msgid "&Disable Job Spooling"
msgstr "關閉列印工作佇列(&D)"

#: management/kmmainview.cpp:195
msgid "&Configure..."
msgstr "設定(&C)..."

#: management/kmmainview.cpp:196
msgid "Add &Printer/Class..."
msgstr "新增印表機/類別(&P)..."

#: management/kmmainview.cpp:197
msgid "Add &Special (pseudo) Printer..."
msgstr "新增特殊(假的)印表機(&S)..."

#: management/kmmainview.cpp:198
msgid "Set as &Local Default"
msgstr "設定為本地預設值(&L)"

#: management/kmmainview.cpp:199
msgid "Set as &User Default"
msgstr "設定為使用者預設值(&U)"

#: management/kmmainview.cpp:200
msgid "&Test Printer..."
msgstr "測試印表機(&T)..."

#: management/kmmainview.cpp:201
msgid "Configure &Manager..."
msgstr "設定管理員(&M)..."

#: management/kmmainview.cpp:202
msgid "Initialize Manager/&View"
msgstr "初始化管理員/顯示(&V)"

#: management/kmmainview.cpp:204
msgid "&Orientation"
msgstr "方向(&O)"

#: management/kmmainview.cpp:207
msgid "&Vertical,&Horizontal"
msgstr "垂直(&V),水平(&H)"

#: management/kmmainview.cpp:211
msgid "R&estart Server"
msgstr "重新啟動伺服器(&E)"

#: management/kmmainview.cpp:212
msgid "Configure &Server..."
msgstr "設定伺服器(&S)..."

#: management/kmmainview.cpp:213
#, fuzzy
msgid "Configure Server Access..."
msgstr "設定伺服器(&S)..."

#: management/kmmainview.cpp:216
msgid "Hide &Toolbar"
msgstr "隱藏工具列(&T)"

#: management/kmmainview.cpp:218
msgid "Show Me&nu Toolbar"
msgstr "顯示選單工具列(&N)"

#: management/kmmainview.cpp:219
msgid "Hide Me&nu Toolbar"
msgstr "隱藏選單工具列(&N)"

#: management/kmmainview.cpp:221
msgid "Show Pr&inter Details"
msgstr "顯示印表機詳細資訊(&I)"

#: management/kmmainview.cpp:222
msgid "Hide Pr&inter Details"
msgstr "隱藏印表機詳細資訊(&I)"

#: management/kmmainview.cpp:226
msgid "Toggle Printer &Filtering"
msgstr "切換印表機過濾(&F)"

#: management/kmmainview.cpp:230
msgid "Pri&nter Tools"
msgstr "印表機工具(&N)"

#: management/kmmainview.cpp:295
msgid "Print Server"
msgstr "列印伺服器"

#: management/kmmainview.cpp:301
msgid "Print Manager"
msgstr "列印管理員"

#: management/kmmainview.cpp:334
msgid "An error occurred while retrieving the printer list."
msgstr "接收印表機清單時發生錯誤。"

#: management/kmmainview.cpp:511
#, c-format
msgid "Unable to modify the state of printer %1."
msgstr "無法修改印表機 %1 的狀態設定。"

#: management/kmmainview.cpp:522
msgid "Do you really want to remove %1?"
msgstr "您確定要刪除 %1？"

#: management/kmmainview.cpp:526
#, c-format
msgid "Unable to remove special printer %1."
msgstr "無法移除特殊印表機 %1。"

#: management/kmmainview.cpp:529
#, c-format
msgid "Unable to remove printer %1."
msgstr "無法移除印表機 %1。"

#: management/kmmainview.cpp:559
#, c-format
msgid "Configure %1"
msgstr "設定 %1"

#: management/kmmainview.cpp:566
#, c-format
msgid "Unable to modify settings of printer %1."
msgstr "無法修改印表機 %1 的設定。"

#: management/kmmainview.cpp:570
#, c-format
msgid "Unable to load a valid driver for printer %1."
msgstr "無法載入印表機 %1 的驅動程式。"

#: management/kmmainview.cpp:582
msgid "Unable to create printer."
msgstr "無法建立印表機。"

#: management/kmmainview.cpp:594
msgid "Unable to define printer %1 as default."
msgstr "無法將 %1 設定為預設印表機。"

#: management/kmmainview.cpp:634
#, c-format
msgid "Unable to test printer %1."
msgstr "無法對印表機 %1 進行測試動作。"

#: management/kmmainview.cpp:647
msgid "Error message received from manager:
          %1
          "
msgstr "由管理程式端收到錯誤訊息回應：
          %1
          "

#: management/kmmainview.cpp:649
msgid "Internal error (no error message)."
msgstr "內部錯誤 (無錯誤訊息)。"

#: management/kmmainview.cpp:667
msgid "Unable to restart print server."
msgstr "無法重新啟動印表機伺服器。"

#: management/kmmainview.cpp:672
msgid "Restarting server..."
msgstr "重新啟動伺服器..."

#: management/kmmainview.cpp:682
msgid "Unable to configure print server."
msgstr "無法設定印表機伺服器。"

#: management/kmmainview.cpp:687
msgid "Configuring server..."
msgstr "正在設定伺服器..."

#: management/kmmainview.cpp:842
msgid ""
"Unable to start printer tool. Possible reasons are: no printer selected, the "
"selected printer doesn't have any local device defined (printer port), or "
"the tool library could not be found."
msgstr ""
"無法執行印表機設定工具。可能的問題是：未選擇印表機，或者是所選取的印表機並沒"
"有設定好所位於的本地端位置 (埠號)，或者是印表機設定工具相關程式庫未正確安裝，"
"所以無法使用。"

#: management/kmmainview.cpp:866
msgid "Unable to retrieve the printer list."
msgstr "無法擷取印表機清單。"

#: management/kmpages.cpp:69
msgid "Instances"
msgstr "實體"

#: management/kmpropbackend.cpp:34
msgid "Printer type:"
msgstr "印表機類型："

#: management/kmpropbackend.cpp:48
msgid "Interface"
msgstr "介面"

#: management/kmpropbackend.cpp:49
msgid "Interface Settings"
msgstr "介面設定"

#: management/kmpropbackend.cpp:62
msgid "IPP Printer"
msgstr "IPP 印表機"

#: management/kmpropbackend.cpp:63
msgid "Local USB Printer"
msgstr "本地 USB 印表機"

#: management/kmpropbackend.cpp:64
msgid "Local Parallel Printer"
msgstr "本地並列埠印表機"

#: management/kmpropbackend.cpp:65
msgid "Local Serial Printer"
msgstr "本地串列埠印表機"

#: management/kmpropbackend.cpp:66
msgid "Network Printer (socket)"
msgstr "網路印表機 (Socket)"

#: management/kmpropbackend.cpp:67
msgid "SMB printers (Windows)"
msgstr "SMB 印表機 (Windows)"

#: management/kmpropbackend.cpp:69
msgid "File printer"
msgstr "檔案印表機"

#: management/kmpropbackend.cpp:70
msgid "Serial Fax/Modem printer"
msgstr "串列埠 傳真/數據機 印表機"

#: management/kmpropbackend.cpp:71
msgid ""
"_: Unknown Protocol\n"
"Unknown"
msgstr "不明的協定"

#: management/kmpropcontainer.cpp:35
msgid "Change..."
msgstr "變更..."

#: management/kmpropdriver.cpp:36
msgid "Manufacturer:"
msgstr "生產廠商："

#: management/kmpropdriver.cpp:37
msgid "Printer model:"
msgstr "印表機型號："

#: management/kmpropdriver.cpp:38
msgid "Driver info:"
msgstr "驅動程式資訊："

#: management/kmpropgeneral.cpp:37
msgid "Printer name:"
msgstr "印表機名稱："

#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59
msgid "Members"
msgstr "成員"

#: management/kmpropmembers.cpp:40
msgid "Class Members"
msgstr "類別成員"

#: management/kmpropwidget.cpp:50
msgid ""
"Unable to change printer properties. Error received from manager:
          %1"
msgstr "無法變更印表機的屬性設定。由管理程式傳回的錯誤資訊：
          %1
          "

#: management/kmspecialprinterdlg.cpp:46
msgid "Add Special Printer"
msgstr "新增特殊印表機"

#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115
#: management/kxmlcommanddlg.cpp:866
msgid "&Description:"
msgstr "描述(&D)："

#: management/kmspecialprinterdlg.cpp:58
msgid "&Location:"
msgstr "位置(&L)："

#: management/kmspecialprinterdlg.cpp:66
msgid "Command &Settings"
msgstr "命令設定(&S)"

#: management/kmspecialprinterdlg.cpp:69
msgid "Outp&ut File"
msgstr "輸出檔案(&U)"

#: management/kmspecialprinterdlg.cpp:71
msgid "&Enable output file"
msgstr "開啟輸出檔案(&E)"

#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116
msgid "&Format:"
msgstr "格式(&F)："

#: management/kmspecialprinterdlg.cpp:88
msgid "Filename e&xtension:"
msgstr "副檔名(&X)："

#: management/kmspecialprinterdlg.cpp:105
msgid ""
"
          The command will use an output file. If checked, make sure the command "
"contains an output tag.
          "
msgstr ""
"
          當您選擇該項目時，這個命令將會使用輸出檔案，請確認另包含輸出的標籤。
          "

#: management/kmspecialprinterdlg.cpp:108
#, c-format
msgid ""
"
          The command to execute when printing on this special printer. Either "
"enter the command to execute directly, or associate/create a command object "
"with/for this special printer. The command object is the preferred method as "
"it provides support for advanced settings like mime type checking, "
"configurable options and requirement list (the plain command is only "
"provided for backward compatibility). When using a plain command, the "
"following tags are recognized:
          • %in: the input file "
"(required).
          • %out: the output file (required if using an "
"output file).
          • %psl: the paper size in lower case.
          • "
"%psu: the paper size with the first letter in upper case.
          "
msgstr ""
"
          當印列到這個特殊的印表機時，這個指令就會被執行。請直接輸入將被執行的指令，"
"或是連結/建立一個指令物件到這個特殊的印表機。命令物件是我們比較喜歡的方式，因"
"為他提供比較進階的檢查如 MIME 型別，組太設定以及需求表 (輸入將被執行的指令的"
"存在只是為了往前相容)。當輸入單純的指令時，下面的標記會被認得：：
          • %in： 輸入檔案 (必要).
          • %out： 輸出檔案 (如果"
"有使用輸出檔案時必要。)
          • %psl： 小寫的紙張大小。
          • "
"%psu： 第一個字母大寫的只張大小。
          "

#: management/kmspecialprinterdlg.cpp:118
msgid ""
"
          The default mimetype for the output file (e.g. application/postscript)."
msgstr "
          輸出檔案的預設 MIME 型態（例如：application/postscript）。
          "

#: management/kmspecialprinterdlg.cpp:121
msgid "
          The default extension for the output file (e.g. ps, pdf, ps.gz).
          "
msgstr "
          輸出檔案的預設附檔名（例如：ps, pdf, ps.gz）。
          "

#: management/kmspecialprinterdlg.cpp:170
msgid "You must provide a non-empty name."
msgstr "指定名稱不得為空白。"

#: management/kmspecialprinterdlg.cpp:178
#, c-format
msgid "Invalid settings. %1."
msgstr "不正確的設定。%1。"

#: management/kmspecialprinterdlg.cpp:197
#, c-format
msgid "Configuring %1"
msgstr "設定 %1"

#: management/kmwbackend.cpp:54
msgid "Backend Selection"
msgstr "後端介面選擇"

#: management/kmwbackend.cpp:68
msgid "You must select a backend."
msgstr "您必須選擇一個後端介面。"

#: management/kmwbackend.cpp:115
msgid "&Local printer (parallel, serial, USB)"
msgstr "本地印表機 [並列埠、串列埠、USB](&L)"

#: management/kmwbackend.cpp:116
msgid ""
"
          Locally-connected printer
          Use this for a printer connected to "
"the computer via a parallel, serial or USB port.
          "
msgstr ""
" 
          本地端連接的印表機
           
          印表機是透過平行埠、序列埠或 USB 埠直接連接"
"到此電腦時，請選擇此項。
          "

#: management/kmwbackend.cpp:122
msgid "&SMB shared printer (Windows)"
msgstr "SMB 分享印表機 [Windows](&S)"

#: management/kmwbackend.cpp:123
msgid ""
"
          Shared Windows printer
          Use this for a printer installed on a "
"Windows server and shared on the network using the SMB protocol (samba)."
msgstr ""
" 
          分享的 Windows 印表機
           
          若是印表機安裝在一個 Windows 伺服器並透"
"過 SMB 協定（samba）分享出來時，請選擇此項。
          "

#: management/kmwbackend.cpp:130
msgid "&Remote LPD queue"
msgstr "遠端 LPD 佇列(&R)"

#: management/kmwbackend.cpp:131
msgid ""
"
          Print queue on a remote LPD server
          Use this for a print queue "
"existing on a remote machine running a LPD print server.
          "
msgstr ""
" 
          遠端 LPD 佇列
           
          若使用遠端 LPD 印表伺服器，請選擇此項。
          "

#: management/kmwbackend.cpp:137
msgid "Ne&twork printer (TCP)"
msgstr "網路印表機 [TCP](&T)"

#: management/kmwbackend.cpp:138
msgid ""
"
          Network TCP printer
          Use this for a network-enabled printer "
"using TCP (usually on port 9100) as communication protocol. Most network "
"printers can use this mode.
          "
msgstr ""
" 
          TCP 網路印表機
           
          若是使用 TCP 網路印表機，也就是使用 TCP 網路協"
"定（通常都使用 port 9100）來連接印表機，請選擇此項。大部份的網路印表機都可以"
"使用這個模式。
          "

#: management/kmwclass.cpp:37
msgid "Class Composition"
msgstr "類別結構"

#: management/kmwclass.cpp:52
msgid "Available printers:"
msgstr "可用的印表機："

#: management/kmwclass.cpp:53
msgid "Class printers:"
msgstr "類別印表機："

#: management/kmwclass.cpp:79
msgid "You must select at least one printer."
msgstr "您必須選擇最少一個印表機。"

#: management/kmwdriver.cpp:33
msgid "Printer Model Selection"
msgstr "印表機型號選擇"

#: management/kmwdriver.cpp:80 management/kmwend.cpp:106
#: management/kmwname.cpp:83
msgid "Raw printer"
msgstr "Raw 印表機"

#: management/kmwdriver.cpp:113
msgid "Internal error: unable to locate the driver."
msgstr "內部錯誤： 無法找到驅動程式。"

#: management/kmwdriverselect.cpp:37
msgid "Driver Selection"
msgstr "驅動程式選擇"

#: management/kmwdriverselect.cpp:43
msgid ""
"
          Several drivers have been detected for this model. Select the driver you "
"want to use. You will have the opportunity to test it as well as to change "
"it if necessary.
          "
msgstr ""
"
          在這個型號上偵測到有幾個驅動程式可用。選擇一個您想要使用的驅動程式。您將會"
"有機會測試這個驅動程式，如果有必要的話還可以更換。
          "

#: management/kmwdriverselect.cpp:46
msgid "Driver Information"
msgstr "伺服器資訊"

#: management/kmwdriverselect.cpp:62
msgid "You must select a driver."
msgstr "您必須選擇一個驅動程式。"

#: management/kmwdriverselect.cpp:82
msgid " [recommended]"
msgstr "【推薦使用】"

#: management/kmwdriverselect.cpp:113
msgid "No information about the selected driver."
msgstr "沒有關於所選驅動程式的資訊。"

#: management/kmwdrivertest.cpp:41
msgid "Printer Test"
msgstr "印表機測試"

#: management/kmwdrivertest.cpp:51
msgid "Manufacturer:"
msgstr "生產廠商："

#: management/kmwdrivertest.cpp:52
msgid "Model:"
msgstr "型號："

#: management/kmwdrivertest.cpp:53
msgid "Description:"
msgstr "描述："

#: management/kmwdrivertest.cpp:55
msgid "&Test"
msgstr "測試(&T)"

#: management/kmwdrivertest.cpp:59
msgid ""
"
          Now you can test the printer before finishing installation. Use the "
"Settings button to configure the printer driver and the Test "
"button to test your configuration. Use the Back button to change the "
"driver (your current configuration will be discarded).
          "
msgstr ""
"
          現在您在完成安裝前可以測試一下印表機。用 設定 按鍵來設定印表機驅動"
"程式和 測試 按鍵來測試您的設定值。使用 上一步 按鍵改變驅動程式 "
"(您現在的設定值將會被丟棄。
          "

#: management/kmwdrivertest.cpp:117
msgid "Unable to load the requested driver:
          %1
          "
msgstr "無法載入所需的驅動程式：
          %1
          "

#: management/kmwdrivertest.cpp:146
msgid ""
"Test page successfully sent to printer. Wait until printing is complete, "
"then click the OK button."
msgstr "測試頁已經成功的送至印表機。請等待印表完成，然後按確定按鈕。
          "

#: management/kmwdrivertest.cpp:148
msgid "Unable to test printer: "
msgstr "無法測試印表機： "

#: management/kmwdrivertest.cpp:150
msgid "Unable to remove temporary printer."
msgstr "無法移除暫存印表機。"

#: management/kmwdrivertest.cpp:153
msgid "Unable to create temporary printer."
msgstr "無法新增暫存印表機。"

#: management/kmwend.cpp:33
msgid "Confirmation"
msgstr "再確定"

#: management/kmwend.cpp:50 management/kmwend.cpp:106 management/kmwend.cpp:109
#: tdefilelist.cpp:102
msgid "Type"
msgstr "類型"

#: management/kmwend.cpp:52
msgid "Location"
msgstr "位置"

#: management/kmwend.cpp:53 management/kmwend.cpp:112
#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545
msgid "Description"
msgstr "描述"

#: management/kmwend.cpp:69
msgid "Backend"
msgstr "後端介面"

#: management/kmwend.cpp:74
msgid "Device"
msgstr "裝置"

#: management/kmwend.cpp:77
msgid "Printer IP"
msgstr "印表機 IP 位址"

#: management/kmwend.cpp:78 management/kmwend.cpp:89
msgid "Port"
msgstr "埠"

#: management/kmwend.cpp:81 management/kmwend.cpp:88
msgid "Host"
msgstr "主機"

#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48
msgid "Queue"
msgstr "佇列"

#: management/kmwend.cpp:91
msgid "Account"
msgstr "帳號"

#: management/kmwend.cpp:96
msgid "URI"
msgstr "URI"

#: management/kmwend.cpp:109
msgid "DB driver"
msgstr "DB 驅動程式"

#: management/kmwend.cpp:109
msgid "External driver"
msgstr "外部驅動程式"

#: management/kmwend.cpp:110
msgid "Manufacturer"
msgstr "生產廠商"

#: management/kmwend.cpp:111
msgid "Model"
msgstr "型號"

#: management/kmwfile.cpp:35
msgid "File Selection"
msgstr "選擇檔案"

#: management/kmwfile.cpp:41
msgid ""
"
          The printing will be redirected to a file. Enter here the path of the "
"file you want to use for redirection. Use an absolute path or the browse "
"button for graphical selection.
          "
msgstr ""
"
          這個列印工作將會被轉向到一個檔案。在這裡輸入那個您要轉向的檔案的路徑。請用"
"絕對路徑或 [瀏覽] 按鍵來使用圖形化選擇器。
          "

#: management/kmwfile.cpp:44
msgid "Print to file:"
msgstr "列印至檔案："

#: management/kmwfile.cpp:66
msgid "Directory does not exist."
msgstr "目錄不存在。"

#: management/kmwinfopage.cpp:32
msgid "Introduction"
msgstr "介紹"

#: management/kmwinfopage.cpp:37
#, fuzzy
msgid ""
"
          Welcome,

          This wizard will help to install a new printer on your "
"computer. It will guide you through the various steps of the process of "
"installing and configuring a printer for your printing system. At each step, "
"you can always go back using the Back button.

          We hope you "
"enjoy this tool!

          "
msgstr ""
"
          歡迎來到印表精靈

          這個精靈會協助您在您的電腦上安裝一個新的印表"
"機。它會引導您一步一步完成安裝以及設定一個印表系統的工作。在每一步您都可以利"
"用 上一步 按鍵重新設定前面的步驟。

          我們希望您會喜歡這個工"
"具！

          TDE printing team
          "

#: management/kmwizard.cpp:64 management/kmwizard.cpp:209
msgid "&Next >"
msgstr "下一頁(&N) >"

#: management/kmwizard.cpp:66
msgid "< &Back"
msgstr "< 上一頁(&B)"

#: management/kmwizard.cpp:131 management/kmwizard.cpp:166
#: management/kmwizard.cpp:191
msgid "Add Printer Wizard"
msgstr "新增印表機精靈"

#: management/kmwizard.cpp:166
msgid "Modify Printer"
msgstr "修改印表機"

#: management/kmwizard.cpp:191
msgid "Unable to find the requested page."
msgstr "無法找到要求的頁面。"

#: management/kmwizard.cpp:207 management/kmwizard.cpp:234
msgid "&Finish"
msgstr "完成(&F)"

#: management/kmwlocal.cpp:38
msgid "Local Port Selection"
msgstr "本機埠選擇"

#: management/kmwlocal.cpp:50
msgid "Local System"
msgstr "本機系統"

#: management/kmwlocal.cpp:57
msgid "Parallel"
msgstr "並列埠"

#: management/kmwlocal.cpp:58
msgid "Serial"
msgstr "串列埠"

#: management/kmwlocal.cpp:59
msgid "USB"
msgstr "USB 埠"

#: management/kmwlocal.cpp:63
msgid ""
"
          Select a valid detected port, or enter directly the corresponding URI in "
"the bottom edit field.
          "
msgstr ""
"
          從偵測出來的埠中選擇一個有效的，或者直接在底下的編輯區輸入相應的 URI。
          "

#: management/kmwlocal.cpp:78
msgid ""
"_: The URI is empty\n"
"Empty URI."
msgstr "空的 URI。"

#: management/kmwlocal.cpp:83
msgid "The local URI doesn't correspond to a detected port. Continue?"
msgstr "本地的 URI 並不符合偵測到的埠，要繼續？"

#: management/kmwlocal.cpp:85
msgid "Select a valid port."
msgstr "選取一個有效的埠。"

#: management/kmwlocal.cpp:166
msgid "Unable to detect local ports."
msgstr "無法偵測本地埠。"

#: management/kmwlpd.cpp:41
msgid "LPD Queue Information"
msgstr "LPD 佇列資訊"

#: management/kmwlpd.cpp:44
msgid ""
"
          Enter the information concerning the remote LPD queue; this wizard will "
"check it before continuing.
          "
msgstr ""
"
          輸入遠端 LPD 佇列的相關資訊。這個精靈將會在繼續之前先檢查這些資訊。
          "

#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63
msgid "Queue:"
msgstr "佇列："

#: management/kmwlpd.cpp:54
msgid "Some information is missing."
msgstr "缺乏部份資訊。"

#: management/kmwlpd.cpp:61
msgid "Cannot find queue %1 on server %2; do you want to continue anyway?"
msgstr "無法在 %2 伺服器上找到佇列 %1。您確定要繼續？"

#: management/kmwname.cpp:34
msgid "General Information"
msgstr "一般資訊"

#: management/kmwname.cpp:37
msgid ""
"
          Enter the information concerning your printer or class. Name is "
"mandatory, Location and Description are not (they may even not "
"be used on some systems).
          "
msgstr ""
"
          輸入您的印表機或類別的相關資訊。名稱 是必須的，位置 和 描"
"述 則不是 (後兩者甚至在大部份的系統裡都不會用到)。
          "

#: management/kmwname.cpp:39
msgid "Name:"
msgstr "名稱："

#: management/kmwname.cpp:48
msgid "You must supply at least a name."
msgstr "您必須提供至少一個名稱。"

#: management/kmwname.cpp:56
msgid ""
"It is usually not a good idea to include spaces in printer name: it may "
"prevent your printer from working correctly. The wizard can strip all spaces "
"from the string you entered, resulting in %1; what do you want to do?"
msgstr ""
"一般來說，提供的印表機名稱設定，最好不要包含有空白，以避免一些意外情況導致您"
"的列印工作無法正常進行。設定精靈程式能夠將您所輸入字串內的空白加以去除，最後"
"得到 %1。您打算要怎麼做呢？"

#: management/kmwname.cpp:62
msgid "Strip"
msgstr "去除空白"

#: management/kmwpassword.cpp:37
msgid "User Identification"
msgstr "使用者識別"

#: management/kmwpassword.cpp:43
msgid ""
"
          This backend may require a login/password to work properly. Select the "
"type of access to use and fill in the login and password entries if needed."
msgstr ""
"
          這個後端介面可能會需要一個使用者名稱/密碼才能使用。請選擇存取的型態，並填"
"入使用者名稱與密碼。
          "

#: management/kmwpassword.cpp:49
msgid "&Login:"
msgstr "登入(&L)："

#: management/kmwpassword.cpp:53
msgid "&Anonymous (no login/password)"
msgstr "匿名（沒有使用者名稱/密碼）(&A)"

#: management/kmwpassword.cpp:54
msgid "&Guest account (login=\"guest\")"
msgstr "訪客帳號（guest）(&G)"

#: management/kmwpassword.cpp:55
msgid "Nor&mal account"
msgstr "一般帳號(&M)"

#: management/kmwpassword.cpp:88
msgid "Select one option"
msgstr "選擇一個選項"

#: management/kmwpassword.cpp:90
msgid "User name is empty."
msgstr "使用者名稱是空的。"

#: management/kmwsmb.cpp:35
msgid "SMB Printer Settings"
msgstr "SMB 印表機設定"

#: management/kmwsmb.cpp:41
msgid "Scan"
msgstr "掃描"

#: management/kmwsmb.cpp:42
msgid "Abort"
msgstr "中止"

#: management/kmwsmb.cpp:44
msgid "Workgroup:"
msgstr "工作群組："

#: management/kmwsmb.cpp:45
msgid "Server:"
msgstr "伺服器："

#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99
msgid "Printer:"
msgstr "印表機："

#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45
msgid "Empty printer name."
msgstr "空的印表機名稱。"

#: management/kmwsmb.cpp:99
#, c-format
msgid "Login: %1"
msgstr "登入：%1"

#: management/kmwsmb.cpp:99
msgid ""
msgstr "<匿名>"

#: management/kmwsocket.cpp:38
msgid "Network Printer Information"
msgstr "網路印表機資訊"

#: management/kmwsocket.cpp:48
msgid "&Printer address:"
msgstr "印表機位址(&P)："

#: management/kmwsocket.cpp:49
msgid "P&ort:"
msgstr "埠(&O)："

#: management/kmwsocket.cpp:99
msgid "You must enter a printer address."
msgstr "您必須輸入一個印表機位址。"

#: management/kmwsocket.cpp:110
msgid "Wrong port number."
msgstr "錯誤的埠號。"

#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338
msgid "&Subnetwork:"
msgstr "子網路(&S)："

#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340
msgid "&Timeout (ms):"
msgstr "逾時[微秒](&T)："

#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378
msgid "Scan Configuration"
msgstr "掃描設定值"

#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110
#: management/networkscanner.cpp:390 management/networkscanner.cpp:396
msgid "Wrong subnetwork specification."
msgstr "錯誤的子網路設定。"

#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404
msgid "Wrong timeout specification."
msgstr "錯誤的逾時設定。"

#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407
msgid "Wrong port specification."
msgstr "錯誤的埠設定。"

#: management/kxmlcommanddlg.cpp:108
msgid "Integer"
msgstr "整數"

#: management/kxmlcommanddlg.cpp:109
msgid "Float"
msgstr "浮點數"

#: management/kxmlcommanddlg.cpp:110
msgid "List"
msgstr "列表"

#: management/kxmlcommanddlg.cpp:118
msgid "Default &value:"
msgstr "預設值(&V)："

#: management/kxmlcommanddlg.cpp:119
msgid "Co&mmand:"
msgstr "命令(&M)："

#: management/kxmlcommanddlg.cpp:126
msgid "&Persistent option"
msgstr "持續性選項(&P)"

#: management/kxmlcommanddlg.cpp:128
msgid "Va&lues"
msgstr "數值(&L)"

#: management/kxmlcommanddlg.cpp:136
msgid "Minimum v&alue:"
msgstr "最小值(&A)："

#: management/kxmlcommanddlg.cpp:137
msgid "Ma&ximum value:"
msgstr "最大值(&X)："

#: management/kxmlcommanddlg.cpp:150
msgid "Add value"
msgstr "新增數值"

#: management/kxmlcommanddlg.cpp:151
msgid "Delete value"
msgstr "刪除數值"

#: management/kxmlcommanddlg.cpp:153
msgid "Apply changes"
msgstr "套用設定"

#: management/kxmlcommanddlg.cpp:154
msgid "Add group"
msgstr "新增群組"

#: management/kxmlcommanddlg.cpp:155
msgid "Add option"
msgstr "新增選項"

#: management/kxmlcommanddlg.cpp:156
msgid "Delete item"
msgstr "刪除項目"

#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135
msgid "Move up"
msgstr "向上移動"

#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142
msgid "Move down"
msgstr "向下移動"

#: management/kxmlcommanddlg.cpp:162
msgid "&Input From"
msgstr "輸入來源(&I)"

#: management/kxmlcommanddlg.cpp:163
msgid "O&utput To"
msgstr "輸出至(&U)"

#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166
msgid "File:"
msgstr "檔案："

#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167
msgid "Pipe:"
msgstr "管線："

#: management/kxmlcommanddlg.cpp:285
msgid ""
"An identification string. Use only alphanumeric characters except spaces. "
"The string __root__ is reserved for internal use."
msgstr ""
"一個辨認用的字串。只能使用英文字母與數字，不能使用空白。__root__ 這個"
"字串是保留給內部使用的。"

#: management/kxmlcommanddlg.cpp:289
msgid ""
"A description string. This string is shown in the interface, and should be "
"explicit enough about the role of the corresponding option."
msgstr "一個描述用的字串。會顯示在介面上，而且應該要能清楚表示相關選項的角色。"

#: management/kxmlcommanddlg.cpp:293
msgid ""
"The type of the option. This determines how the option is presented "
"graphically to the user."
msgstr "選項的型態，關係到這個選項要如何以圖形呈現在使用者面前。"

#: management/kxmlcommanddlg.cpp:297
msgid ""
"The format of the option. This determines how the option is formatted for "
"inclusion in the global command line. The tag %value can be used to "
"represent the user selection. This tag will be replaced at run-time by a "
"string representation of the option value."
msgstr ""
"選項的格式，也就是選項如何在命令列上使用。%value 標籤用來表示使用者的"
"選擇。這個標籤可以在執行時被選項的數值所取代。"

#: management/kxmlcommanddlg.cpp:303
msgid ""
"The default value of the option. For non persistent options, nothing is "
"added to the command line if the option has that default value. If this "
"value does not correspond to the actual default value of the underlying "
"utility, make the option persistent to avoid unwanted effects."
msgstr ""
"選項的預設值。對於非持續性的選項來說，使用預設值時就不需要在命令列中特別指"
"定。若是預設值與底下的工具預設值不同，則應該將此選項設為持續性選項以避免無法"
"預期的情況出現。"

#: management/kxmlcommanddlg.cpp:309
msgid ""
"Make the option persistent. A persistent option is always written to the "
"command line, whatever its value. This is useful when the chosen default "
"value does not match with the actual default value of the underlying utility."
msgstr ""
"將選項設為持續性選項。所謂持續性選項是指一定會被寫入命令列的選項。通常所設定"
"的預設值與實際工具的預設值不同時就會用到。"

#: management/kxmlcommanddlg.cpp:313
#, c-format
msgid ""
"The full command line to execute the associated underlying utility. This "
"command line is based on a mechanism of tags that are replaced at run-time. "
"The supported tags are:
          • %filterargs: command options
          • %filterinput: input specification
          • %filteroutput: output specification
          • %psu: the page size in upper case
          • %psl: the page size in lower case
          "
msgstr ""
"工具。這個命令列中含有在執行時會被置換掉的標籤。支援的標籤有： 
             
          • "
"%filterargs：命令選項
            •  
          • %filterinput：指定輸入
            •  
          • "
"%filteroutput：指定輸出
            •  
          • %psu：紙張大小，以大寫表示
            •  "
"
          • %psl：紙張大小，以小寫表示
          "

#: management/kxmlcommanddlg.cpp:323
#, c-format
msgid ""
"Input specification when the underlying utility reads input data from a "
"file. Use the tag %in to represent the input filename."
msgstr "指定底下的工具讀取輸入資料的檔案。用 %in 來表示輸入檔名。"

#: management/kxmlcommanddlg.cpp:327
#, c-format
msgid ""
"Output specification when the underlying utility writes output data to a "
"file. Use the tag %out to represent the output filename."
msgstr "指定底下的工具輸出資料的檔案。用 %out 來表示輸出檔名。"

#: management/kxmlcommanddlg.cpp:331
msgid ""
"Input specification when the underlying utility reads input data from its "
"standard input."
msgstr "指定底下的工具從標準輸入讀取輸入資料。"

#: management/kxmlcommanddlg.cpp:335
msgid ""
"Output specification when the underlying utility writes output data to its "
"standard output."
msgstr "指定底下的工具從標準輸出送出資料。"

#: management/kxmlcommanddlg.cpp:339
msgid ""
"A comment about the underlying utility, which can be viewed by the user from "
"the interface. This comment string supports basic HTML tags like <a>, "
"<b> or <i>."
msgstr ""
"底下工具的註解，可以讓使用者從介面中讀取。註解字串支援基本的 HTML 標籤如 <"
"a>, <b> 或 <i>。"

#: management/kxmlcommanddlg.cpp:568
msgid ""
"Invalid identification name. Empty strings and \"__root__\" are not allowed."
msgstr "無效的標識名。不允許空字串和“__root__”。"

#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652
msgid "New Group"
msgstr "新群組"

#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671
msgid "New Option"
msgstr "新選項"

#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939
#, c-format
msgid "Command Edit for %1"
msgstr "編輯 %1 的命令"

#: management/kxmlcommanddlg.cpp:833
msgid "&Mime Type Settings"
msgstr "Mime 類型設定(&M)"

#: management/kxmlcommanddlg.cpp:839
msgid "Supported &Input Formats"
msgstr "支援的輸入格式(&I)"

#: management/kxmlcommanddlg.cpp:851
msgid "&Edit Command..."
msgstr "編輯命令(&E)..."

#: management/kxmlcommanddlg.cpp:868
msgid "Output &format:"
msgstr "輸出格式(&F)："

#: management/kxmlcommanddlg.cpp:870
msgid "ID name:"
msgstr "ID 名稱："

#: management/kxmlcommanddlg.cpp:1033
msgid "exec:/"
msgstr "exec:/"

#: management/kxmlcommandselector.cpp:54
msgid "New command"
msgstr "新命令"

#: management/kxmlcommandselector.cpp:55
msgid "Edit command"
msgstr "編輯命令"

#: management/kxmlcommandselector.cpp:72
msgid "&Browse..."
msgstr "瀏覽(&B)..."

#: management/kxmlcommandselector.cpp:73
msgid "Use co&mmand:"
msgstr "使用命令(&M)："

#: management/kxmlcommandselector.cpp:174
msgid "Command Name"
msgstr "命令名稱"

#: management/kxmlcommandselector.cpp:174
msgid "Enter an identification name for the new command:"
msgstr "請輸入該新命令的識別名稱："

#: management/kxmlcommandselector.cpp:183
msgid ""
"A command named %1 already exists. Do you want to continue and edit the "
"existing one?"
msgstr "命名為 %1 的命令項目已經存在了，您要繼續並編輯該項目嗎？"

#: management/kxmlcommandselector.cpp:220
msgid "Internal error. The XML driver for the command %1 could not be found."
msgstr "內部錯誤。找不到 %1 命令用的 XML 驅動程式。"

#: management/kxmlcommandselector.cpp:238
msgid "output"
msgstr "輸出"

#: management/kxmlcommandselector.cpp:242
msgid "undefined"
msgstr "未定義"

#: management/kxmlcommandselector.cpp:247
msgid "not allowed"
msgstr "不允許"

#: management/kxmlcommandselector.cpp:253
msgid "(Unavailable: requirements not satisfied)"
msgstr "（無法取得：無法滿足需求）"

#: management/networkscanner.cpp:104 management/networkscanner.cpp:184
msgid "Sc&an"
msgstr "掃描(&A)"

#: management/networkscanner.cpp:111
msgid "Network scan:"
msgstr "網路掃描："

#: management/networkscanner.cpp:112 management/networkscanner.cpp:299
#: management/networkscanner.cpp:310
#, c-format
msgid "Subnet: %1"
msgstr "子網路： %1"

#: management/networkscanner.cpp:161
msgid ""
"You are about to scan a subnet (%1.*) that does not correspond to the "
"current subnet of this computer (%2.*). Do you want to scan the specified "
"subnet anyway?"
msgstr ""
"您即將掃描與這部電腦的子網路 (%2.*) 不對應的子網路 (%1.*)。您仍想掃描指定的子"
"網路嗎？"

#: management/networkscanner.cpp:164
msgid "&Scan"
msgstr "掃描(&S)"

#: management/smbview.cpp:44
msgid "Comment"
msgstr "備註"

#: management/tdeprint_management_module.cpp:48
msgid "Select Command"
msgstr "選擇指令"

#: marginpreview.cpp:135
msgid "No preview available"
msgstr "無法預覽"

#: marginwidget.cpp:37
msgid ""
"   
          Top Margin
          .  
          This spinbox/text edit field lets you "
"control the top margin of your printout if the printing  application does "
"not define its margins internally. 
            
          The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and "
"Konqueror.. 
           
          Note:
          This margin setting is not intended for "
"KOffice or OpenOffice.org printing,  because these applications (or rather "
"their users) are expected to do it by themselves.  It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded  "
"internally.
            
            
            
          Additional hint for power users: "
"This TDEPrint GUI element matches  with the CUPS commandline job option "
"parameter:  
              -o page-top=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  
           
                      "
msgstr ""
" 
          上邊界
           
          如果您的應用程式沒有定義上邊界的話，這裡可以讓您"
"調整您列印輸出的上邊界。
           
          這個設定可用於文字檔列印，或是 KMail、"
"Konqueror 等列印輸出。
           
          注意：
          邊界設定不適用於 KOffice 或 "
"OpenOffice.org，因為這些應用程式通常會自己定義輸出樣式。另外像 PostScript 或 "
"PDF 檔，通常也都會內建邊界設定，因此也不適用於此設定。
           
           
          進"
"階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
               -o page-top=...     # 單位為像素，設為 72 則邊界為一英吋。
          "

#: marginwidget.cpp:57
msgid ""
"   
          Bottom Margin
          .  
          This spinbox/text edit field lets "
"you control the bottom margin of your printout if the printing  application "
"does not define its margins internally. 
            
          The setting works for "
"instance for ASCII text file printing, or for printing from KMail and  and "
"Konqueror. 
           
          Note:
          This margin setting is not intended for "
"KOffice or OpenOffice.org printing,  because these applications (or rather "
"their users) are expected to do it by themselves.  It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded  "
"internally.
            
            
            
          Additional hint for power users: "
"This TDEPrint GUI element matches  with the CUPS commandline job option "
"parameter:  
              -o page-bottom=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  
                     "
msgstr ""
" 
          下邊界
           
          如果您的應用程式沒有定義下邊界的話，這裡可以讓您"
"調整您列印輸出的下邊界。
           
          這個設定可用於文字檔列印，或是 KMail、"
"Konqueror 等列印輸出。
           
          注意：
          邊界設定不適用於 KOffice 或 "
"OpenOffice.org，因為這些應用程式通常會自己定義輸出樣式。另外像 PostScript 或 "
"PDF 檔，通常也都會內建邊界設定，因此也不適用於此設定。
           
           
          進"
"階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
               -o page-bottom=...     # 單位為像素，設為 72 則邊界為一英吋。
          "

#: marginwidget.cpp:76
msgid ""
"   
          Left Margin
          .  
          This spinbox/text edit field lets you "
"control the left margin of your printout if the printing  application does "
"not define its margins internally. 
            
          The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and Konqueror. "
"
           
          Note:
          This margin setting is not intended for KOffice or "
"OpenOffice.org printing,  because these applications (or rather their users) "
"are expected to do it by themselves.  It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded  internally.  
            
            
          Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
              -o page-left=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
                     "
msgstr ""
" 
          左邊界
           
          如果您的應用程式沒有定義左邊界的話，這裡可以讓您"
"調整您列印輸出的左邊界。
           
          這個設定可用於文字檔列印，或是 KMail、"
"Konqueror 等列印輸出。
           
          注意：
          邊界設定不適用於 KOffice 或 "
"OpenOffice.org，因為這些應用程式通常會自己定義輸出樣式。另外像 PostScript 或 "
"PDF 檔，通常也都會內建邊界設定，因此也不適用於此設定。
           
           
          進"
"階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
               -o page-left=...     # 單位為像素，設為 72 則邊界為一英吋。
          "

#: marginwidget.cpp:95
msgid ""
"   
          Right Margin
          .  
          This spinbox/text edit field lets you "
"control the right margin of your printout if the printing  application does "
"not define its margins internally. 
            
          The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and Konqueror. "
"
           
          Note:
          This margin setting is not intended for KOffice or "
"OpenOffice.org printing,  because these applications (or rather their users) "
"are expected to do it by themselves.  It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded  internally.  
            
            
          Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
              -o page-right=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
                     "
msgstr ""
" 
          右邊界
           
          如果您的應用程式沒有定義右邊界的話，這裡可以讓您"
"調整您列印輸出的右邊界。
           
          這個設定可用於文字檔列印，或是 KMail、"
"Konqueror 等列印輸出。
           
          注意：
          邊界設定不適用於 KOffice 或 "
"OpenOffice.org，因為這些應用程式通常會自己定義輸出樣式。另外像 PostScript 或 "
"PDF 檔，通常也都會內建邊界設定，因此也不適用於此設定。
           
           
          進"
"階使用者的額外提示：這個選項與以下的 CUPS 命令列選項參數是一樣的： "
"
               -o page-right=...     # 單位為像素，設為 72 則邊界為一英吋。
          "

#: marginwidget.cpp:114
msgid ""
"   
          Change Measurement Unit
          .  
          You can change the units of "
"measurement for the page margins here. Select from Millimeter, Centimeter, "
"Inch or Pixels (1 pixel == 1/72 inch).  
                      "
msgstr ""
" 
          變更量測單位
           
          您可以變更邊界的量測單位。可用的單位有：毫"
"米、公分、英吋或像素（一像素為 1/72 英吋）。
          "

#: marginwidget.cpp:121
msgid ""
"   
          Custom Margins Checkbox
          .  
          Enable this checkbox if "
"you want to modify the margins of your printouts  
          You can change margin "
"settings in 4 ways:  
              
          • Edit the text fields. 
            •   
          • Click "
"spinbox arrows. 
            •   
          • Scroll wheel of wheelmouses. 
            •   
          • Drag "
"margins in preview frame with mouse. 
            •   
            Note: The margin "
"setting does not work if you load such files directly into  kprinter, which "
"have their print margins hardcoded internally, like as most  PDF or "
"PostScript files. It works for all ASCII text files however. It also may "
"not  work with non-TDE applications which fail to  fully utilize the "
"TDEPrint framework, such as OpenOffice.org. 
                      "
msgstr ""
" 
          自訂邊界
           
          開啟這個選項的話，您可以變更輸出的邊界。 
           "
"
          您可以用四種方式來變更： 
             
          • 直接在欄位中輸入
            •  
          • 點選上下鍵來遞"
"增/遞減
            •  
          • 使用捲軸
            •  
          • 拖曳預覽圖示中的邊界線。
            •  
           注"
"意：邊界設定對某些檔案不會發生作用，包括已經內定邊界設定的檔案，如 PDF "
"或 PostScript 檔，還有非 TDE 應用程式，如 OpenOffice.org 等。而文字檔列印則適"
"用此選項。
          "

#: marginwidget.cpp:138
msgid ""
"   
          \"Drag-your-Margins\" 
          .  
          Use your mouse to drag and set "
"each margin on this little preview window. 
                      "
msgstr ""
" 
          拖曳您的邊界
           
          您可以用滑鼠拖曳圖示中的邊界線來設定。"

#: marginwidget.cpp:148
msgid "&Use custom margins"
msgstr "使用自訂邊界(&U)"

#: marginwidget.cpp:158
msgid "&Top:"
msgstr "頂端(&T)："

#: marginwidget.cpp:159
msgid "&Bottom:"
msgstr "底端(&B)："

#: marginwidget.cpp:160
msgid "Le&ft:"
msgstr "左(&F)："

#: marginwidget.cpp:161
msgid "&Right:"
msgstr "右(&R)："

#: marginwidget.cpp:164
msgid "Pixels (1/72nd in)"
msgstr "像素"

#: marginwidget.cpp:167
msgid "Inches (in)"
msgstr "英吋"

#: marginwidget.cpp:168
msgid "Centimeters (cm)"
msgstr "公分"

#: marginwidget.cpp:169
msgid "Millimeters (mm)"
msgstr "毫米"

#: plugincombobox.cpp:33
msgid ""
" Print Subsystem Selection 
          This combo box shows (and lets you "
"select) a print subsystem to be used by TDEPrint. (This print subsystem "
"must, of course, be installed inside your Operating System.) TDEPrint "
"usually auto-detects the correct print subsystem by itself upon first "
"startup. Most Linux distributions have \"CUPS\", the Common UNIX "
"Printing System. "
msgstr ""
"選擇列印子系統 
          這個選單讓您選擇 TDEPrint 使用的列印子系統（當"
"然，所選擇的子系統必須有安裝在您的作業系統中）。TDEPrint 通常會在第一次啟動時"
"自動偵測最適合的列印子系統。大部份的 Linux 套件都會內含「通用 Unix 列印系統」"
"（Common UNIX Printing System, CUPS）。
          "

#: plugincombobox.cpp:45
msgid "Print s&ystem currently used:"
msgstr "目前所使用的列印系統(&Y)："

#: plugincombobox.cpp:91
msgid ""
" Current Connection 
          This line shows which CUPS server your PC "
"is currently connected to for printing and retrieving printer info. To "
"switch to a different CUPS server, click \"System Options\", then select "
"\"Cups server\" and fill in the required info. "
msgstr ""
"目前的連線 
          這一行顯示您的電腦目前與哪個 CUPS 伺服器連線並取得印"
"表機資訊。要切換到不同的 CUPS 伺服器，請按「系統選項」→「CUPS 伺服器」並填入"
"適當的資訊。
          "

#: posterpreview.cpp:115
#, fuzzy
msgid ""
"Poster preview not available. Either the poster executable is not "
"properly installed, or you don't have the required version"
msgstr "無法預覽海報。可能是 poster 程式沒有正確安裝，或是您的版本不符."

#: ppdloader.cpp:232
msgid "(line %1): "
msgstr "（行 %1）："

#: rlpr/kmconfigproxy.cpp:29
msgid "Proxy"
msgstr "代理伺服器"

#: rlpr/kmconfigproxy.cpp:30
msgid "RLPR Proxy Server Settings"
msgstr "RLPR 代理伺服器設定"

#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50
msgid "Remote LPD Queue Settings"
msgstr "遠端 LPD 佇列設定"

#: rlpr/kmproxywidget.cpp:32
msgid "Proxy Settings"
msgstr "代理伺服器設定"

#: rlpr/kmproxywidget.cpp:36
msgid "&Use proxy server"
msgstr "使用代理伺服器(&U)"

#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85
msgid "Empty host name."
msgstr "空的主機名稱。"

#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87
msgid "Empty queue name."
msgstr "空的佇列名稱。"

#: rlpr/kmrlprmanager.cpp:63
msgid "Printer not found."
msgstr "找不到印表機。"

#: rlpr/kmrlprmanager.cpp:75
msgid "Not implemented yet."
msgstr "抱歉，該功能尚未實作。"

#: rlpr/kmwrlpr.cpp:124
msgid "Remote queue %1 on %2"
msgstr "在 %2 上的遠端佇列 %1"

#: rlpr/kmwrlpr.cpp:199
msgid "No Predefined Printers"
msgstr "沒有預先定義好的印表機。"

#: rlpr/krlprprinterimpl.cpp:73
msgid "The printer is incompletely defined. Try to reinstall it."
msgstr "這個印表機並沒有完整的定義，試試看重新安裝。"

#: tdefilelist.cpp:42
msgid ""
"  Add File button 
          This button calls the 'File Open' "
"dialog to let you select a file for printing. Note, that  
          • you can "
"select ASCII or International Text, PDF, PostScript, JPEG, TIFF, PNG, GIF "
"and many other graphic formats. 
          • you can select various files from "
"different paths and send them as one \"multi-file job\" to the printing "
"system. 
                     "
msgstr ""
"新增檔案 
          這個按鈕會叫出「開啟檔案」對話框，讓您選擇要列印的檔"
"案。注意： 
             
          • 您可以選擇文字檔、PDF、PostScript、JPEG、TIFF、PNG、GIF "
"及其他許多圖形格式的檔案。
            •  
          • 您可以選擇多個檔案，並送出成一個列印工"
"作。
          "

#: tdefilelist.cpp:54
msgid ""
"  Remove File button 
          This button removes the highlighted file "
"from the list of to-be-printed files. "
msgstr ""
"移除檔案 
          這個按鈕會將要列印選單中所選取的檔案移除。
          "

#: tdefilelist.cpp:59
msgid ""
"  Move File Up button 
          This button moves the highlighted file "
"up in the list of files to be printed.
           
          In effect, this changes the "
"order of the files' printout.
                     "
msgstr ""
"向上移動 
          這個按鈕會將要列印檔案選單中所選取的檔案往上移動。 
          這也會影響到列印檔案的先後順序。
          "

#: tdefilelist.cpp:66
msgid ""
"  Move File Down button 
          This button moves the highlighted file "
"down in the list of files to be printed.
           
          In effect, this changes the "
"order of the files' printout.
                     "
msgstr ""
"向下移動 
          這個按鈕會將要列印檔案選單中所選取的檔案往下移動。 
          這也會影響到列印檔案的先後順序。
          "

#: tdefilelist.cpp:73
msgid ""
"  File Open button 
          This button tries to open the highlighted "
"file, so you can view or edit it before you send it to the printing system. 
          If you open files, TDEPrint will use the application matching the MIME "
"type of the file.
                     "
msgstr ""
"開啟檔案 
          這個按鈕可以開啟所選取的檔案，讓您可以在送出列印之前再"
"確認或修改。
           
          如果您選擇開啟檔案，TDEPrint 會根據檔案的 MIME 型態來決定"
"用什麼應用程式開啟。
          "

#: tdefilelist.cpp:82
msgid ""
"  File List view 
          This list displays all the files you selected "
"for printing. You can see the file name(s), file path(s) and the file (MIME) "
"type(s) as determined by TDEPrint. You may re-arrange the  initial order of "
"the list  with the help of the arrow buttons on the right.
           
          The files "
"will be printed as a single job, in the same order as displayed in the list."
"
           
          Note: You can select multiple files. The files may be in "
"multiple locations. The files may be of multiple MIME types. The buttons on "
"the right side let you add more files, remove already selected files from "
"the list,  re-order the list (by moving files up or down), and open files. "
"If you open files, TDEPrint will use the application matching the MIME type "
"of the file.
                     "
msgstr ""
"檔案列表 
          這個列表顯示您選擇要列印的檔案。您可以看到檔名、路徑"
"與 MIME 型態。您可以重新安排列印的順序。
           
          這些檔案以一個列印工作依序送"
"出。
           
          注意：您可以選擇多個檔案。這些檔案可以在不同的目錄之中，也"
"可以是不同的 MIME 型態。右邊的按鈕可以讓您新增、移除、開啟檔案，或重新排列列"
"印的順序。如果您要開啟檔案，TDEPrint 會根據檔案的 MIME 型態來決定要用什麼應用"
"程式開啟。
          "

#: tdefilelist.cpp:103
msgid "Path"
msgstr "路徑"

#: tdefilelist.cpp:115
msgid "Add file"
msgstr "新增檔案"

#: tdefilelist.cpp:121
msgid "Remove file"
msgstr "移除檔案"

#: tdefilelist.cpp:128
msgid "Open file"
msgstr "開啟檔案"

#: tdefilelist.cpp:149
msgid ""
"Drag file(s) here or use the button to open a file dialog. Leave empty for "
"<STDIN>."
msgstr ""
"將檔案拖曳至這裡，或者點選按鈕開啟檔案對話方塊。若是為 <STDIN> "
"的話，維持空白原狀即可。"

#: tdeprintd.cpp:176
msgid ""
"Some of the files to print are not readable by the TDE print daemon. This "
"may happen if you are trying to print as a different user to the one "
"currently logged in. To continue printing, you need to provide root's "
"password."
msgstr ""
"TDE 列印服務程式無法讀取某些要列印的文件。這可能是您使用非目前登入主機的身份"
"來執行列印工作。如果要繼續列印的話，您需要輸入提供系統管理員的密碼。"

#: tdeprintd.cpp:181
msgid "Provide root's Password"
msgstr "請提供 root 的密碼"

#: tdeprintd.cpp:200 tdeprintd.cpp:202
#, c-format
msgid "Printing Status - %1"
msgstr "列印狀態 - %1"

#: tdeprintd.cpp:263
msgid "Printing system"
msgstr "列印系統"

#: tdeprintd.cpp:266
msgid "Authentication failed (user name=%1)"
msgstr "認證失敗（使用者名稱：%1）！"

#: tools/escputil/escpwidget.cpp:45
msgid "EPSON InkJet Printer Utilities"
msgstr "EPSON 噴墨印表機工具"

#: tools/escputil/escpwidget.cpp:91
msgid "&Use direct connection (might need root permissions)"
msgstr "使用直接連線（可能需要 root 權限）(&U)"

#: tools/escputil/escpwidget.cpp:103
msgid "Clea&n print head"
msgstr "清潔列印噴頭(&N)"

#: tools/escputil/escpwidget.cpp:104
msgid "&Print a nozzle test pattern"
msgstr "列印噴嘴測試圖案(&P)"

#: tools/escputil/escpwidget.cpp:105
msgid "&Align print head"
msgstr "對齊列印頭校正(&A)"

#: tools/escputil/escpwidget.cpp:106
msgid "&Ink level"
msgstr "墨水量(&I)"

#: tools/escputil/escpwidget.cpp:107
msgid "P&rinter identification"
msgstr "印表機識別(&R)"

#: tools/escputil/escpwidget.cpp:153
msgid "Internal error: no device set."
msgstr "內部錯誤：無裝置設定。"

#: tools/escputil/escpwidget.cpp:164
#, c-format
msgid "Unsupported connection type: %1"
msgstr "不支援的連線類型： %1"

#: tools/escputil/escpwidget.cpp:171
msgid ""
"An escputil process is still running. You must wait until its completion "
"before continuing."
msgstr "escputil 程序仍然在執行中。您必須等待該程式執行完畢後才能夠繼續。"

#: tools/escputil/escpwidget.cpp:179
msgid ""
"The executable escputil cannot be found in your PATH environment variable. "
"Make sure gimp-print is installed and that escputil is in your PATH."
msgstr ""
"escputil 程式在目前的 PATH 環境變數所指定的目錄內找尋不到。請確定 gimp-print "
"套件程式已經安裝了，並確認 PATH 設定正確。"

#: tools/escputil/escpwidget.cpp:204
msgid "Internal error: unable to start escputil process."
msgstr "內部錯誤： 無法執行 escputil 程式。"

#: tools/escputil/escpwidget.cpp:214
msgid "Operation terminated with errors."
msgstr "因為發生錯誤所以運作終結。"

#: util.h:64
#, fuzzy
msgid "Envelope C5"
msgstr "US #10 信封"

#: util.h:65
#, fuzzy
msgid "Envelope DL"
msgstr "US #10 信封"

#: util.h:66
msgid "Envelope US #10"
msgstr ""

#: util.h:67
msgid "Executive"
msgstr ""

#: kprintpreviewui.rc:13
#, no-c-format
msgid "&PageMarks"
msgstr "頁面標簽(&P)"

#, fuzzy
#~ msgid "Orientation"
#~ msgstr "方向(&O)"

#, fuzzy
#~ msgid "Print"
#~ msgstr "列印(&P)"

#, fuzzy
#~ msgid "Cancel"
#~ msgstr "已取消"

#, fuzzy
#~ msgid "Fonts"
#~ msgstr "字型路徑"

#, fuzzy
#~ msgid "&Remove"
#~ msgstr "移除(&V)"

#, fuzzy
#~ msgid "Configure"
#~ msgstr "設定 %1"

#, fuzzy
#~ msgid "Remove"
#~ msgstr "移除(&V)"

#, fuzzy
#~ msgid "Show &Toolbar"
#~ msgstr "顯示選單工具列(&N)"

#, fuzzy
#~ msgid "Add"
#~ msgstr "新增(&A)"

#, fuzzy
#~ msgid "Information"
#~ msgstr "再確定"

#, fuzzy
#~ msgid "Properties"
#~ msgstr "內容"

#, fuzzy
#~ msgid "&Settings"
#~ msgstr "設定"

#, fuzzy
#~ msgid "File"
#~ msgstr "檔案："

#, fuzzy
#~ msgid "&File"
#~ msgstr "檔案(&F)"

#~ msgid "%1 &Handbook"
#~ msgstr "%1 手冊(&H)"

#~ msgid "%1 &Web Site"
#~ msgstr "%1 Web 站台(&W)"

#~ msgid "Documentation"
#~ msgstr "文件"