diff options
Diffstat (limited to 'arch/3.5.13/trinity-base/hal/hal.patch')
-rw-r--r-- | arch/3.5.13/trinity-base/hal/hal.patch | 24335 |
1 files changed, 0 insertions, 24335 deletions
diff --git a/arch/3.5.13/trinity-base/hal/hal.patch b/arch/3.5.13/trinity-base/hal/hal.patch deleted file mode 100644 index d5e2709a5..000000000 --- a/arch/3.5.13/trinity-base/hal/hal.patch +++ /dev/null @@ -1,24335 +0,0 @@ -diff -u -r hal-0.5.14/aclocal.m4 src/hal-0.5.14/aclocal.m4 ---- hal-0.5.14/aclocal.m4 2009-11-30 23:22:30.000000000 +0100 -+++ src/hal-0.5.14/aclocal.m4 2011-12-19 20:40:08.000000000 +0100 -@@ -1,4 +1,4 @@ --# generated automatically by aclocal 1.11 -*- Autoconf -*- -+# generated automatically by aclocal 1.11.1 -*- Autoconf -*- - - # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, - # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -@@ -13,8 +13,8 @@ - - m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl --m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],, --[m4_warning([this file was generated for autoconf 2.64. -+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, -+[m4_warning([this file was generated for autoconf 2.68. - You have another version of autoconf. It may work, but is not guaranteed to. - If you have problems, you may need to regenerate the build system entirely. - To do so, use the procedure documented by the package, typically `autoreconf'.])]) -@@ -22,7 +22,8 @@ - # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- - # - # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, --# 2006, 2007, 2008 Free Software Foundation, Inc. -+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -+# Foundation, Inc. - # Written by Gordon Matzigkeit, 1996 - # - # This file is free software; the Free Software Foundation gives -@@ -31,7 +32,8 @@ - - m4_define([_LT_COPYING], [dnl - # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, --# 2006, 2007, 2008 Free Software Foundation, Inc. -+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -+# Foundation, Inc. - # Written by Gordon Matzigkeit, 1996 - # - # This file is part of GNU Libtool. -@@ -58,7 +60,7 @@ - # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - ]) - --# serial 56 LT_INIT -+# serial 57 LT_INIT - - - # LT_PREREQ(VERSION) -@@ -87,6 +89,7 @@ - # ------------------ - AC_DEFUN([LT_INIT], - [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl - AC_BEFORE([$0], [LT_LANG])dnl - AC_BEFORE([$0], [LT_OUTPUT])dnl - AC_BEFORE([$0], [LTDL_INIT])dnl -@@ -103,6 +106,8 @@ - AC_REQUIRE([LTOBSOLETE_VERSION])dnl - m4_require([_LT_PROG_LTMAIN])dnl - -+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) -+ - dnl Parse OPTIONS - _LT_SET_OPTIONS([$0], [$1]) - -@@ -139,7 +144,7 @@ - *) break;; - esac - done --cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - ]) - - -@@ -159,6 +164,11 @@ - m4_defun([_LT_SETUP], - [AC_REQUIRE([AC_CANONICAL_HOST])dnl - AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl -+ -+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl -+dnl - _LT_DECL([], [host_alias], [0], [The host system])dnl - _LT_DECL([], [host], [0])dnl - _LT_DECL([], [host_os], [0])dnl -@@ -181,10 +191,13 @@ - dnl - m4_require([_LT_FILEUTILS_DEFAULTS])dnl - m4_require([_LT_CHECK_SHELL_FEATURES])dnl -+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl - m4_require([_LT_CMD_RELOAD])dnl - m4_require([_LT_CHECK_MAGIC_METHOD])dnl -+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl - m4_require([_LT_CMD_OLD_ARCHIVE])dnl - m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -+m4_require([_LT_WITH_SYSROOT])dnl - - _LT_CONFIG_LIBTOOL_INIT([ - # See if we are running on zsh, and set the options which allow our -@@ -200,7 +213,6 @@ - _LT_CHECK_OBJDIR - - m4_require([_LT_TAG_COMPILER])dnl --_LT_PROG_ECHO_BACKSLASH - - case $host_os in - aix3*) -@@ -214,23 +226,6 @@ - ;; - esac - --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' -- --# Same as above, but do not quote variable references. --double_quote_subst='s/\([["`\\]]\)/\\\1/g' -- --# Sed substitution to delay expansion of an escaped shell variable in a --# double_quote_subst'ed string. --delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -- --# Sed substitution to delay expansion of an escaped single quote. --delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -- --# Sed substitution to avoid accidental globbing in evaled expressions --no_glob_subst='s/\*/\\\*/g' -- - # Global variables: - ofile=libtool - can_build_shared=yes -@@ -271,6 +266,28 @@ - ])# _LT_SETUP - - -+# _LT_PREPARE_SED_QUOTE_VARS -+# -------------------------- -+# Define a few sed substitution that help us do robust quoting. -+m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -+[# Backslashify metacharacters that are still active within -+# double-quoted strings. -+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' -+ -+# Same as above, but do not quote variable references. -+double_quote_subst='s/\([["`\\]]\)/\\\1/g' -+ -+# Sed substitution to delay expansion of an escaped shell variable in a -+# double_quote_subst'ed string. -+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -+ -+# Sed substitution to delay expansion of an escaped single quote. -+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -+ -+# Sed substitution to avoid accidental globbing in evaled expressions -+no_glob_subst='s/\*/\\\*/g' -+]) -+ - # _LT_PROG_LTMAIN - # --------------- - # Note that this code is called both from `configure', and `config.status' -@@ -423,7 +440,7 @@ - # declaration there will have the same value as in `configure'. VARNAME - # must have a single quote delimited value for this to work. - m4_define([_LT_CONFIG_STATUS_DECLARE], --[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) -+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - - # _LT_CONFIG_STATUS_DECLARATIONS -@@ -433,7 +450,7 @@ - # embedded single quotes properly. In configure, this macro expands - # each variable declared with _LT_DECL (and _LT_TAGDECL) into: - # --# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`' -+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`' - m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], - [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) -@@ -532,12 +549,20 @@ - LTCFLAGS='$LTCFLAGS' - compiler='$compiler_DEFAULT' - -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+\$[]1 -+_LTECHO_EOF' -+} -+ - # Quote evaled strings. - for var in lt_decl_all_varnames([[ \ - ]], lt_decl_quote_varnames); do -- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) -- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -@@ -548,9 +573,9 @@ - # Double-quote double-evaled strings. - for var in lt_decl_all_varnames([[ \ - ]], lt_decl_dquote_varnames); do -- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) -- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -@@ -558,16 +583,38 @@ - esac - done - --# Fix-up fallback echo if it was mangled by the above quoting rules. --case \$lt_ECHO in --*'\\\[$]0 --fallback-echo"')dnl " -- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` -- ;; --esac -- - _LT_OUTPUT_LIBTOOL_INIT - ]) - -+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -+# ------------------------------------ -+# Generate a child script FILE with all initialization necessary to -+# reuse the environment learned by the parent script, and make the -+# file executable. If COMMENT is supplied, it is inserted after the -+# `#!' sequence but before initialization text begins. After this -+# macro, additional text can be appended to FILE to form the body of -+# the child script. The macro ends with non-zero status if the -+# file could not be fully written (such as if the disk is full). -+m4_ifdef([AS_INIT_GENERATED], -+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -+[m4_defun([_LT_GENERATED_FILE_INIT], -+[m4_require([AS_PREPARE])]dnl -+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -+[lt_write_fail=0 -+cat >$1 <<_ASEOF || lt_write_fail=1 -+#! $SHELL -+# Generated by $as_me. -+$2 -+SHELL=\${CONFIG_SHELL-$SHELL} -+export SHELL -+_ASEOF -+cat >>$1 <<\_ASEOF || lt_write_fail=1 -+AS_SHELL_SANITIZE -+_AS_PREPARE -+exec AS_MESSAGE_FD>&1 -+_ASEOF -+test $lt_write_fail = 0 && chmod +x $1[]dnl -+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - - # LT_OUTPUT - # --------- -@@ -577,20 +624,11 @@ - AC_DEFUN([LT_OUTPUT], - [: ${CONFIG_LT=./config.lt} - AC_MSG_NOTICE([creating $CONFIG_LT]) --cat >"$CONFIG_LT" <<_LTEOF --#! $SHELL --# Generated by $as_me. --# Run this file to recreate a libtool stub with the current configuration. -- --lt_cl_silent=false --SHELL=\${CONFIG_SHELL-$SHELL} --_LTEOF -+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -+[# Run this file to recreate a libtool stub with the current configuration.]) - - cat >>"$CONFIG_LT" <<\_LTEOF --AS_SHELL_SANITIZE --_AS_PREPARE -- --exec AS_MESSAGE_FD>&1 -+lt_cl_silent=false - exec AS_MESSAGE_LOG_FD>>config.log - { - echo -@@ -616,7 +654,7 @@ - m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) - configured by $[0], generated by m4_PACKAGE_STRING. - --Copyright (C) 2008 Free Software Foundation, Inc. -+Copyright (C) 2011 Free Software Foundation, Inc. - This config.lt script is free software; the Free Software Foundation - gives unlimited permision to copy, distribute and modify it." - -@@ -661,15 +699,13 @@ - # appending to config.log, which fails on DOS, as config.log is still kept - # open by configure. Here we exec the FD to /dev/null, effectively closing - # config.log, so it can be properly (re)opened and appended to by config.lt. --if test "$no_create" != yes; then -- lt_cl_success=: -- test "$silent" = yes && -- lt_config_lt_args="$lt_config_lt_args --quiet" -- exec AS_MESSAGE_LOG_FD>/dev/null -- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -- exec AS_MESSAGE_LOG_FD>>config.log -- $lt_cl_success || AS_EXIT(1) --fi -+lt_cl_success=: -+test "$silent" = yes && -+ lt_config_lt_args="$lt_config_lt_args --quiet" -+exec AS_MESSAGE_LOG_FD>/dev/null -+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -+exec AS_MESSAGE_LOG_FD>>config.log -+$lt_cl_success || AS_EXIT(1) - ])# LT_OUTPUT - - -@@ -732,15 +768,12 @@ - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? -- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ -- || (rm -f "$cfgfile"; exit 1) -- -- _LT_PROG_XSI_SHELLFNS -+ sed '$q' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) - -- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ -- || (rm -f "$cfgfile"; exit 1) -+ _LT_PROG_REPLACE_SHELLFNS - -- mv -f "$cfgfile" "$ofile" || -+ mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - ], -@@ -785,6 +818,7 @@ - m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], -+ [Go], [_LT_LANG(GO)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], -@@ -806,6 +840,29 @@ - ])# _LT_LANG - - -+m4_ifndef([AC_PROG_GO], [ -+# NOTE: This macro has been submitted for inclusion into # -+# GNU Autoconf as AC_PROG_GO. When it is available in # -+# a released version of Autoconf we should remove this # -+# macro and use it instead. # -+m4_defun([AC_PROG_GO], -+[AC_LANG_PUSH(Go)dnl -+AC_ARG_VAR([GOC], [Go compiler command])dnl -+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl -+_AC_ARG_VAR_LDFLAGS()dnl -+AC_CHECK_TOOL(GOC, gccgo) -+if test -z "$GOC"; then -+ if test -n "$ac_tool_prefix"; then -+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) -+ fi -+fi -+if test -z "$GOC"; then -+ AC_CHECK_PROG(GOC, gccgo, gccgo, false) -+fi -+])#m4_defun -+])#m4_ifndef -+ -+ - # _LT_LANG_DEFAULT_CONFIG - # ----------------------- - m4_defun([_LT_LANG_DEFAULT_CONFIG], -@@ -836,6 +893,10 @@ - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -+AC_PROVIDE_IFELSE([AC_PROG_GO], -+ [LT_LANG(GO)], -+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) -+ - AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -@@ -846,11 +907,13 @@ - AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) - AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) - AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) - dnl aclocal-1.4 backwards compatibility: - dnl AC_DEFUN([AC_LIBTOOL_CXX], []) - dnl AC_DEFUN([AC_LIBTOOL_F77], []) - dnl AC_DEFUN([AC_LIBTOOL_FC], []) - dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -+dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - - # _LT_TAG_COMPILER -@@ -936,7 +999,13 @@ - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? -- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then -+ # If there is a non-empty error log, and "single_module" -+ # appears in it, assume the flag caused a linker warning -+ if test -s conftest.err && $GREP single_module conftest.err; then -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ # Otherwise, if the output was created with a 0 exit code from -+ # the compiler, it worked. -+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD -@@ -944,6 +1013,7 @@ - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) -+ - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no -@@ -955,6 +1025,34 @@ - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) -+ -+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], -+ [lt_cv_ld_force_load=no -+ cat > conftest.c << _LT_EOF -+int forced_loaded() { return 2;} -+_LT_EOF -+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD -+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD -+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD -+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD -+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD -+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD -+ cat > conftest.c << _LT_EOF -+int main() { return 0;} -+_LT_EOF -+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD -+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err -+ _lt_result=$? -+ if test -s conftest.err && $GREP force_load conftest.err; then -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then -+ lt_cv_ld_force_load=yes -+ else -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ fi -+ rm -f conftest.err libconftest.a conftest conftest.c -+ rm -rf conftest.dSYM -+ ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -@@ -982,7 +1080,7 @@ - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi -- if test "$DSYMUTIL" != ":"; then -+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= -@@ -992,8 +1090,8 @@ - ]) - - --# _LT_DARWIN_LINKER_FEATURES --# -------------------------- -+# _LT_DARWIN_LINKER_FEATURES([TAG]) -+# --------------------------------- - # Checks for linker and compiler features on darwin - m4_defun([_LT_DARWIN_LINKER_FEATURES], - [ -@@ -1002,7 +1100,13 @@ - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -- _LT_TAGVAR(whole_archive_flag_spec, $1)='' -+ if test "$lt_cv_ld_force_load" = "yes"; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' -+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], -+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='' -+ fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in -@@ -1010,7 +1114,7 @@ - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then -- output_verbose_link_cmd=echo -+ output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -@@ -1026,203 +1130,142 @@ - fi - ]) - --# _LT_SYS_MODULE_PATH_AIX --# ----------------------- -+# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -+# ---------------------------------- - # Links a minimal program and checks the executable - # for the system default hardcoded library path. In most cases, - # this is /usr/lib:/lib, but when the MPI compilers are used - # the location of the communication and MPI libs are included too. - # If we don't find anything, use the default library path according - # to the aix ld manual. -+# Store the results from the different compilers for each TAGNAME. -+# Allow to override them for all tags through lt_cv_aix_libpath. - m4_defun([_LT_SYS_MODULE_PATH_AIX], - [m4_require([_LT_DECL_SED])dnl --AC_LINK_IFELSE(AC_LANG_PROGRAM,[ --lt_aix_libpath_sed=' -- /Import File Strings/,/^$/ { -- /^0/ { -- s/^0 *\(.*\)$/\1/ -- p -- } -- }' --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then -- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --fi],[]) --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+if test "${lt_cv_aix_libpath+set}" = set; then -+ aix_libpath=$lt_cv_aix_libpath -+else -+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], -+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ -+ lt_aix_libpath_sed='[ -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *\([^ ]*\) *$/\1/ -+ p -+ } -+ }]' -+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ # Check for a 64-bit object if we didn't find anything. -+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then -+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ fi],[]) -+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then -+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" -+ fi -+ ]) -+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -+fi - ])# _LT_SYS_MODULE_PATH_AIX - - - # _LT_SHELL_INIT(ARG) - # ------------------- - m4_define([_LT_SHELL_INIT], --[ifdef([AC_DIVERSION_NOTICE], -- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], -- [AC_DIVERT_PUSH(NOTICE)]) --$1 --AC_DIVERT_POP --])# _LT_SHELL_INIT -+[m4_divert_text([M4SH-INIT], [$1 -+])])# _LT_SHELL_INIT -+ - - - # _LT_PROG_ECHO_BACKSLASH - # ----------------------- --# Add some code to the start of the generated configure script which --# will find an echo command which doesn't interpret backslashes. -+# Find how we can fake an echo command that does not interpret backslash. -+# In particular, with Autoconf 2.60 or later we add some code to the start -+# of the generated configure script which will find a shell with a builtin -+# printf (which we can use as an echo command). - m4_defun([_LT_PROG_ECHO_BACKSLASH], --[_LT_SHELL_INIT([ --# Check that we are running under the correct shell. --SHELL=${CONFIG_SHELL-/bin/sh} -- --case X$lt_ECHO in --X*--fallback-echo) -- # Remove one level of quotation (which was required for Make). -- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` -- ;; --esac -- --ECHO=${lt_ECHO-echo} --if test "X[$]1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X[$]1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then -- # Yippee, $ECHO works! -- : -+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO -+ -+AC_MSG_CHECKING([how to print strings]) -+# Test print first, because it will be a builtin if present. -+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ -+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then -+ ECHO='print -r --' -+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then -+ ECHO='printf %s\n' - else -- # Restart under the correct shell. -- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} --fi -- --if test "X[$]1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat <<_LT_EOF --[$]* --_LT_EOF -- exit 0 -+ # Use this function as a fallback that always works. -+ func_fallback_echo () -+ { -+ eval 'cat <<_LTECHO_EOF -+$[]1 -+_LTECHO_EOF' -+ } -+ ECHO='func_fallback_echo' - fi - --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- --if test -z "$lt_ECHO"; then -- if test "X${echo_test_string+set}" != Xset; then -- # find a string as large as possible, as long as the shell can cope with it -- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do -- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -- if { echo_test_string=`eval $cmd`; } 2>/dev/null && -- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null -- then -- break -- fi -- done -- fi -- -- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- : -- else -- # The Solaris, AIX, and Digital Unix default echo programs unquote -- # backslashes. This makes it impossible to quote backslashes using -- # echo "$something" | sed 's/\\/\\\\/g' -- # -- # So, first we look for a working echo in the user's PATH. -- -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for dir in $PATH /usr/ucb; do -- IFS="$lt_save_ifs" -- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- ECHO="$dir/echo" -- break -- fi -- done -- IFS="$lt_save_ifs" -- -- if test "X$ECHO" = Xecho; then -- # We didn't find a better echo, so look for alternatives. -- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # This shell has a builtin print -r that does the trick. -- ECHO='print -r' -- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && -- test "X$CONFIG_SHELL" != X/bin/ksh; then -- # If we have ksh, try running configure again with it. -- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -- export ORIGINAL_CONFIG_SHELL -- CONFIG_SHELL=/bin/ksh -- export CONFIG_SHELL -- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} -- else -- # Try using printf. -- ECHO='printf %s\n' -- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # Cool, printf works -- : -- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -- export CONFIG_SHELL -- SHELL="$CONFIG_SHELL" -- export SHELL -- ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -- else -- # maybe with a smaller string... -- prev=: -- -- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do -- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null -- then -- break -- fi -- prev="$cmd" -- done -+# func_echo_all arg... -+# Invoke $ECHO with all args, space-separated. -+func_echo_all () -+{ -+ $ECHO "$*" -+} - -- if test "$prev" != 'sed 50q "[$]0"'; then -- echo_test_string=`eval $prev` -- export echo_test_string -- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} -- else -- # Oops. We lost completely, so just stick with echo. -- ECHO=echo -- fi -- fi -- fi -- fi -- fi --fi -+case "$ECHO" in -+ printf*) AC_MSG_RESULT([printf]) ;; -+ print*) AC_MSG_RESULT([print -r]) ;; -+ *) AC_MSG_RESULT([cat]) ;; -+esac - --# Copy echo and quote the copy suitably for passing to libtool from --# the Makefile, instead of quoting the original, which is used later. --lt_ECHO=$ECHO --if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then -- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" --fi -+m4_ifdef([_AS_DETECT_SUGGESTED], -+[_AS_DETECT_SUGGESTED([ -+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( -+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO -+ PATH=/empty FPATH=/empty; export PATH FPATH -+ test "X`printf %s $ECHO`" = "X$ECHO" \ -+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - --AC_SUBST(lt_ECHO) --]) - _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) --_LT_DECL([], [ECHO], [1], -- [An echo program that does not interpret backslashes]) -+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) - ])# _LT_PROG_ECHO_BACKSLASH - - -+# _LT_WITH_SYSROOT -+# ---------------- -+AC_DEFUN([_LT_WITH_SYSROOT], -+[AC_MSG_CHECKING([for sysroot]) -+AC_ARG_WITH([sysroot], -+[ --with-sysroot[=DIR] Search for dependent libraries within DIR -+ (or the compiler's sysroot if not specified).], -+[], [with_sysroot=no]) -+ -+dnl lt_sysroot will always be passed unquoted. We quote it here -+dnl in case the user passed a directory name. -+lt_sysroot= -+case ${with_sysroot} in #( -+ yes) -+ if test "$GCC" = yes; then -+ lt_sysroot=`$CC --print-sysroot 2>/dev/null` -+ fi -+ ;; #( -+ /*) -+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` -+ ;; #( -+ no|'') -+ ;; #( -+ *) -+ AC_MSG_RESULT([${with_sysroot}]) -+ AC_MSG_ERROR([The sysroot must be an absolute path.]) -+ ;; -+esac -+ -+ AC_MSG_RESULT([${lt_sysroot:-no}]) -+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -+[dependent libraries, and in which our libraries should be installed.])]) -+ - # _LT_ENABLE_LOCK - # --------------- - m4_defun([_LT_ENABLE_LOCK], -@@ -1251,7 +1294,7 @@ - ;; - *-*-irix6*) - # Find out which ABI we are using. -- echo '[#]line __oline__ "configure"' > conftest.$ac_ext -+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in -@@ -1344,14 +1387,27 @@ - CFLAGS="$SAVE_CFLAGS" - fi - ;; --sparc*-*solaris*) -+*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in -- yes*) LD="${LD-ld} -m elf64_sparc" ;; -+ yes*) -+ case $host in -+ i?86-*-solaris*) -+ LD="${LD-ld} -m elf_x86_64" -+ ;; -+ sparc*-*-solaris*) -+ LD="${LD-ld} -m elf64_sparc" -+ ;; -+ esac -+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available. -+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then -+ LD="${LD-ld}_sol2" -+ fi -+ ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" -@@ -1369,14 +1425,47 @@ - ])# _LT_ENABLE_LOCK - - -+# _LT_PROG_AR -+# ----------- -+m4_defun([_LT_PROG_AR], -+[AC_CHECK_TOOLS(AR, [ar], false) -+: ${AR=ar} -+: ${AR_FLAGS=cru} -+_LT_DECL([], [AR], [1], [The archiver]) -+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) -+ -+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], -+ [lt_cv_ar_at_file=no -+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM], -+ [echo conftest.$ac_objext > conftest.lst -+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' -+ AC_TRY_EVAL([lt_ar_try]) -+ if test "$ac_status" -eq 0; then -+ # Ensure the archiver fails upon bogus file names. -+ rm -f conftest.$ac_objext libconftest.a -+ AC_TRY_EVAL([lt_ar_try]) -+ if test "$ac_status" -ne 0; then -+ lt_cv_ar_at_file=@ -+ fi -+ fi -+ rm -f conftest.* libconftest.a -+ ]) -+ ]) -+ -+if test "x$lt_cv_ar_at_file" = xno; then -+ archiver_list_spec= -+else -+ archiver_list_spec=$lt_cv_ar_at_file -+fi -+_LT_DECL([], [archiver_list_spec], [1], -+ [How to feed a file listing to the archiver]) -+])# _LT_PROG_AR -+ -+ - # _LT_CMD_OLD_ARCHIVE - # ------------------- - m4_defun([_LT_CMD_OLD_ARCHIVE], --[AC_CHECK_TOOL(AR, ar, false) --test -z "$AR" && AR=ar --test -z "$AR_FLAGS" && AR_FLAGS=cru --_LT_DECL([], [AR], [1], [The archiver]) --_LT_DECL([], [AR_FLAGS], [1]) -+[_LT_PROG_AR - - AC_CHECK_TOOL(STRIP, strip, :) - test -z "$STRIP" && STRIP=: -@@ -1395,18 +1484,27 @@ - if test -n "$RANLIB"; then - case $host_os in - openbsd*) -- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) -- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac -- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" - fi -+ -+case $host_os in -+ darwin*) -+ lock_old_archive_extraction=yes ;; -+ *) -+ lock_old_archive_extraction=no ;; -+esac - _LT_DECL([], [old_postinstall_cmds], [2]) - _LT_DECL([], [old_postuninstall_cmds], [2]) - _LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -+_LT_DECL([], [lock_old_archive_extraction], [0], -+ [Whether to use a lock for old archive extraction]) - ])# _LT_CMD_OLD_ARCHIVE - - -@@ -1431,15 +1529,15 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD -- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes -@@ -1479,7 +1577,7 @@ - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD -- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes -@@ -1542,6 +1640,11 @@ - lt_cv_sys_max_cmd_len=8192; - ;; - -+ mint*) -+ # On MiNT this can take a long time and run out of memory. -+ lt_cv_sys_max_cmd_len=8192; -+ ;; -+ - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. -@@ -1567,6 +1670,11 @@ - lt_cv_sys_max_cmd_len=196608 - ;; - -+ os2*) -+ # The test takes a long time on OS/2. -+ lt_cv_sys_max_cmd_len=8192 -+ ;; -+ - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not -@@ -1606,8 +1714,8 @@ - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. -- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ -- = "XX$teststring$teststring"; } >/dev/null 2>&1 && -+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ -+ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` -@@ -1658,7 +1766,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --[#line __oline__ "configure" -+[#line $LINENO "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -1699,7 +1807,13 @@ - # endif - #endif - --void fnord() { int i=42;} -+/* When -fvisbility=hidden is used, assume the code has been annotated -+ correspondingly for the symbols needed. */ -+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -+int fnord () __attribute__((visibility("default"))); -+#endif -+ -+int fnord () { return 42; } - int main () - { - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -@@ -1708,7 +1822,11 @@ - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else -+ { -+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else puts (dlerror ()); -+ } - /* dlclose (self); */ - } - else -@@ -1884,16 +2002,16 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD -- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes -@@ -2052,6 +2170,7 @@ - m4_require([_LT_FILEUTILS_DEFAULTS])dnl - m4_require([_LT_DECL_OBJDUMP])dnl - m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_CHECK_SHELL_FEATURES])dnl - AC_MSG_CHECKING([dynamic linker characteristics]) - m4_if([$1], - [], [ -@@ -2060,16 +2179,23 @@ - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac -- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then -+ case $host_os in -+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; -+ *) lt_sed_strip_eq="s,=/,/,g" ;; -+ esac -+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` -+ case $lt_search_path_spec in -+ *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. -- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` -- else -- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` -+ ;; -+ *) -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` -+ ;; -+ esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= -@@ -2082,7 +2208,7 @@ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done -- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' - BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; -@@ -2102,7 +2228,13 @@ - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } - }'` -- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -+ # AWK program above erroneously prepends '/' to C:/dos/paths -+ # for these hosts. -+ case $host_os in -+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ -+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; -+ esac -+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` - else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - fi]) -@@ -2128,7 +2260,7 @@ - - case $host_os in - aix3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - -@@ -2137,7 +2269,7 @@ - ;; - - aix[[4-9]]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes -@@ -2190,7 +2322,7 @@ - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -@@ -2202,7 +2334,7 @@ - ;; - - bsdi[[45]]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' -@@ -2221,8 +2353,9 @@ - need_version=no - need_lib_prefix=no - -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ case $GCC,$cc_basename in -+ yes,*) -+ # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ -@@ -2243,36 +2376,83 @@ - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+m4_if([$1], [],[ -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac -+ dynamic_linker='Win32 ld.exe' -+ ;; -+ -+ *,cl*) -+ # Native MSVC -+ libname_spec='$name' -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ library_names_spec='${libname}.dll.lib' -+ -+ case $build_os in -+ mingw*) -+ sys_lib_search_path_spec= -+ lt_save_ifs=$IFS -+ IFS=';' -+ for lt_path in $LIB -+ do -+ IFS=$lt_save_ifs -+ # Let DOS variable expansion print the short 8.3 style file name. -+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` -+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" -+ done -+ IFS=$lt_save_ifs -+ # Convert to MSYS style. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` -+ ;; -+ cygwin*) -+ # Convert to unix form, then to dos form, then back to unix form -+ # but this time dos style (no spaces!) so that the unix form looks -+ # like /cygdrive/c/PROGRA~1:/cygdr... -+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` -+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` -+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ ;; -+ *) -+ sys_lib_search_path_spec="$LIB" -+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then -+ # It is most probably a Windows format PATH. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ # FIXME: find the short name or the path components, as spaces are -+ # common. (e.g. "Program Files" -> "PROGRA~1") -+ ;; -+ esac -+ -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes -+ dynamic_linker='Win32 link.exe' - ;; - - *) -+ # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ dynamic_linker='Win32 ld.exe' - ;; - esac -- dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -@@ -2293,7 +2473,7 @@ - ;; - - dgux*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -@@ -2301,10 +2481,6 @@ - shlibpath_var=LD_LIBRARY_PATH - ;; - --freebsd1*) -- dynamic_linker=no -- ;; -- - freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. -@@ -2312,7 +2488,7 @@ - objformat=`/usr/bin/objformat` - else - case $host_os in -- freebsd[[123]]*) objformat=aout ;; -+ freebsd[[23]].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi -@@ -2330,7 +2506,7 @@ - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in -- freebsd2*) -+ freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) -@@ -2350,12 +2526,26 @@ - ;; - - gnu*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ -+haiku*) -+ version_type=linux # correct to gnu/linux during the next big refactor -+ need_lib_prefix=no -+ need_version=no -+ dynamic_linker="$host_os runtime_loader" -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -@@ -2401,12 +2591,14 @@ - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' -+ # or fails outright, so override atomically: -+ install_override_mode=555 - ;; - - interix[[3-9]]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -@@ -2422,7 +2614,7 @@ - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; -@@ -2459,9 +2651,9 @@ - dynamic_linker=no - ;; - --# This must be Linux ELF. --linux* | k*bsd*-gnu) -- version_type=linux -+# This must be glibc/ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -2469,16 +2661,21 @@ - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no -+ - # Some binutils ld are patched to set DT_RUNPATH -- save_LDFLAGS=$LDFLAGS -- save_libdir=$libdir -- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ -- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" -- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], -- [shlibpath_overrides_runpath=yes])]) -- LDFLAGS=$save_LDFLAGS -- libdir=$save_libdir -+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], -+ [lt_cv_shlibpath_overrides_runpath=no -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ -+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], -+ [lt_cv_shlibpath_overrides_runpath=yes])]) -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ ]) -+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install -@@ -2487,7 +2684,7 @@ - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then -- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - -@@ -2500,18 +2697,6 @@ - dynamic_linker='GNU/Linux ld.so' - ;; - --netbsdelf*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='NetBSD ld.elf_so' -- ;; -- - netbsd*) - version_type=sunos - need_lib_prefix=no -@@ -2531,7 +2716,7 @@ - ;; - - newsos6) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes -@@ -2600,7 +2785,7 @@ - ;; - - solaris*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -2625,7 +2810,7 @@ - ;; - - sysv4 | sysv4.3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -2649,7 +2834,7 @@ - - sysv4*MP*) - if test -d /usr/nec ;then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -2680,7 +2865,7 @@ - - tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -2690,7 +2875,7 @@ - ;; - - uts4*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -2732,6 +2917,8 @@ - The last name is the one that the linker finds with -lNAME]]) - _LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -+_LT_DECL([], [install_override_mode], [1], -+ [Permission mode override for installation of shared libraries]) - _LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) - _LT_DECL([], [postuninstall_cmds], [2], -@@ -2844,6 +3031,7 @@ - AC_REQUIRE([AC_CANONICAL_BUILD])dnl - m4_require([_LT_DECL_SED])dnl - m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - - AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], -@@ -2965,6 +3153,11 @@ - esac - reload_cmds='$LD$reload_flag -o $output$reload_objs' - case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ if test "$GCC" != yes; then -+ reload_cmds=false -+ fi -+ ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' -@@ -2973,8 +3166,8 @@ - fi - ;; - esac --_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl --_LT_DECL([], [reload_cmds], [2])dnl -+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl -+_LT_TAGDECL([], [reload_cmds], [2])dnl - ])# _LT_CMD_RELOAD - - -@@ -3026,16 +3219,18 @@ - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. -- if ( file / ) >/dev/null 2>&1; then -+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. -+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else -- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -+ # Keep this pattern in sync with the one in func_win32_libid. -+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - --cegcc) -+cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' -@@ -3065,6 +3260,10 @@ - lt_cv_deplibs_check_method=pass_all - ;; - -+haiku*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ - hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in -@@ -3073,11 +3272,11 @@ - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) -- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] -+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) -- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' -+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac -@@ -3098,12 +3297,12 @@ - lt_cv_deplibs_check_method=pass_all - ;; - --# This must be Linux ELF. --linux* | k*bsd*-gnu) -+# This must be glibc/ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - --netbsd* | netbsdelf*-gnu) -+netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else -@@ -3177,6 +3376,21 @@ - ;; - esac - ]) -+ -+file_magic_glob= -+want_nocaseglob=no -+if test "$build" = "$host"; then -+ case $host_os in -+ mingw* | pw32*) -+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then -+ want_nocaseglob=yes -+ else -+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` -+ fi -+ ;; -+ esac -+fi -+ - file_magic_cmd=$lt_cv_file_magic_cmd - deplibs_check_method=$lt_cv_deplibs_check_method - test -z "$deplibs_check_method" && deplibs_check_method=unknown -@@ -3184,7 +3398,11 @@ - _LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) - _LT_DECL([], [file_magic_cmd], [1], -- [Command to use when deplibs_check_method == "file_magic"]) -+ [Command to use when deplibs_check_method = "file_magic"]) -+_LT_DECL([], [file_magic_glob], [1], -+ [How to find potential files when deplibs_check_method = "file_magic"]) -+_LT_DECL([], [want_nocaseglob], [1], -+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) - ])# _LT_CHECK_MAGIC_METHOD - - -@@ -3241,9 +3459,21 @@ - NM="$lt_cv_path_NM" - else - # Didn't find any BSD compatible name lister, look for dumpbin. -- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) -- AC_SUBST([DUMPBIN]) -- if test "$DUMPBIN" != ":"; then -+ if test -n "$DUMPBIN"; then : -+ # Let the user override the test. -+ else -+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) -+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in -+ *COFF*) -+ DUMPBIN="$DUMPBIN -symbols" -+ ;; -+ *) -+ DUMPBIN=: -+ ;; -+ esac -+ fi -+ AC_SUBST([DUMPBIN]) -+ if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi - fi -@@ -3254,13 +3484,13 @@ - AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext -- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD -- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) -+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD -- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) -+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" -@@ -3275,6 +3505,67 @@ - dnl AC_DEFUN([AM_PROG_NM], []) - dnl AC_DEFUN([AC_PROG_NM], []) - -+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -+# -------------------------------- -+# how to determine the name of the shared library -+# associated with a specific link library. -+# -- PORTME fill in with the dynamic library characteristics -+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -+[m4_require([_LT_DECL_EGREP]) -+m4_require([_LT_DECL_OBJDUMP]) -+m4_require([_LT_DECL_DLLTOOL]) -+AC_CACHE_CHECK([how to associate runtime and link libraries], -+lt_cv_sharedlib_from_linklib_cmd, -+[lt_cv_sharedlib_from_linklib_cmd='unknown' -+ -+case $host_os in -+cygwin* | mingw* | pw32* | cegcc*) -+ # two different shell functions defined in ltmain.sh -+ # decide which to use based on capabilities of $DLLTOOL -+ case `$DLLTOOL --help 2>&1` in -+ *--identify-strict*) -+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib -+ ;; -+ *) -+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback -+ ;; -+ esac -+ ;; -+*) -+ # fallback: assume linklib IS sharedlib -+ lt_cv_sharedlib_from_linklib_cmd="$ECHO" -+ ;; -+esac -+]) -+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO -+ -+_LT_DECL([], [sharedlib_from_linklib_cmd], [1], -+ [Command to associate shared and link libraries]) -+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -+ -+ -+# _LT_PATH_MANIFEST_TOOL -+# ---------------------- -+# locate the manifest tool -+m4_defun([_LT_PATH_MANIFEST_TOOL], -+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], -+ [lt_cv_path_mainfest_tool=no -+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD -+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then -+ lt_cv_path_mainfest_tool=yes -+ fi -+ rm -f conftest*]) -+if test "x$lt_cv_path_mainfest_tool" != xyes; then -+ MANIFEST_TOOL=: -+fi -+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -+])# _LT_PATH_MANIFEST_TOOL -+ - - # LT_LIB_M - # -------- -@@ -3283,7 +3574,7 @@ - [AC_REQUIRE([AC_CANONICAL_HOST])dnl - LIBM= - case $host in --*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) -+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; - *-ncr-sysv4.3*) -@@ -3311,7 +3602,12 @@ - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - - if test "$GCC" = yes; then -- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -+ case $cc_basename in -+ nvcc*) -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; -+ esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, -@@ -3328,6 +3624,7 @@ - m4_defun([_LT_CMD_GLOBAL_SYMBOLS], - [AC_REQUIRE([AC_CANONICAL_HOST])dnl - AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([AC_PROG_AWK])dnl - AC_REQUIRE([LT_PATH_NM])dnl - AC_REQUIRE([LT_PATH_LD])dnl - m4_require([_LT_DECL_SED])dnl -@@ -3395,8 +3692,8 @@ - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - - # Transform an extracted symbol line into symbol name and symbol address --lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" --lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - - # Handle CRLF in mingw tool chain - opt_cr= -@@ -3420,6 +3717,7 @@ - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ - " {last_section=section; section=\$ 3};"\ -+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ - " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ - " \$ 0!~/External *\|/{next};"\ - " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -@@ -3432,6 +3730,7 @@ - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi -+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no -@@ -3453,7 +3752,7 @@ - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm -- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then -+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" -@@ -3465,6 +3764,18 @@ - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -+/* DATA imports from DLLs on WIN32 con't be const, because runtime -+ relocations are performed -- see ld's documentation on pseudo-relocs. */ -+# define LT@&t@_DLSYM_CONST -+#elif defined(__osf__) -+/* This system does not cope well with relocations in const data. */ -+# define LT@&t@_DLSYM_CONST -+#else -+# define LT@&t@_DLSYM_CONST const -+#endif -+ - #ifdef __cplusplus - extern "C" { - #endif -@@ -3476,7 +3787,7 @@ - cat <<_LT_EOF >> conftest.$ac_ext - - /* The mapping between symbol names and symbols. */ --const struct { -+LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; - } -@@ -3502,15 +3813,15 @@ - _LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext -- lt_save_LIBS="$LIBS" -- lt_save_CFLAGS="$CFLAGS" -+ lt_globsym_save_LIBS=$LIBS -+ lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi -- LIBS="$lt_save_LIBS" -- CFLAGS="$lt_save_CFLAGS" -+ LIBS=$lt_globsym_save_LIBS -+ CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi -@@ -3543,6 +3854,13 @@ - AC_MSG_RESULT(ok) - fi - -+# Response file support. -+if test "$lt_cv_nm_interface" = "MS dumpbin"; then -+ nm_file_list_spec='@' -+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then -+ nm_file_list_spec='@' -+fi -+ - _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) - _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], -@@ -3553,6 +3871,8 @@ - _LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -+_LT_DECL([], [nm_file_list_spec], [1], -+ [Specify filename containing input files for $NM]) - ]) # _LT_CMD_GLOBAL_SYMBOLS - - -@@ -3564,7 +3884,6 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)= - --AC_MSG_CHECKING([for $compiler option to produce PIC]) - m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then -@@ -3615,6 +3934,11 @@ - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; -+ haiku*) -+ # PIC is the default for Haiku. -+ # The "-static" flag exists, but is broken. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)= -+ ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. -@@ -3664,6 +3988,12 @@ - ;; - esac - ;; -+ mingw* | cygwin* | os2* | pw32* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; - dgux*) - case $cc_basename in - ec++*) -@@ -3720,7 +4050,7 @@ - ;; - esac - ;; -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler -@@ -3753,8 +4083,8 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; -- xlc* | xlC*) -- # IBM XL 8.0 on PPC -+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) -+ # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' -@@ -3784,7 +4114,7 @@ - ;; - esac - ;; -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise -@@ -3816,7 +4146,7 @@ - ;; - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -@@ -3920,6 +4250,12 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - -+ haiku*) -+ # PIC is the default for Haiku. -+ # The "-static" flag exists, but is broken. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)= -+ ;; -+ - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -@@ -3962,6 +4298,15 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac -+ -+ case $cc_basename in -+ nvcc*) # Cuda Compiler Driver 2.2 -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' -+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" -+ fi -+ ;; -+ esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in -@@ -4004,7 +4349,7 @@ - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) -@@ -4025,7 +4370,13 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; -- pgcc* | pgf77* | pgf90* | pgf95*) -+ nagfor*) -+ # NAG Fortran compiler -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -@@ -4037,25 +4388,40 @@ - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; -- xl*) -- # IBM XL C 8.0/Fortran 10.1 on PPC -+ xl* | bgxl* | bgf* | mpixl*) -+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) -+ # Sun Fortran 8.3 passes all unrecognized flags to the linker -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' -+ ;; -+ *Sun\ F* | *Sun*Fortran*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; -- *Sun\ F*) -- # Sun Fortran 8.3 passes all unrecognized flags to the linker -- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ *Intel*\ [[CF]]*Compiler*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ *Portland\ Group*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; -@@ -4087,7 +4453,7 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in -- f77* | f90* | f95*) -+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; -@@ -4144,9 +4510,11 @@ - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; - esac --AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) --_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], -- [How to pass a linker flag through the compiler]) -+ -+AC_CACHE_CHECK([for $compiler option to produce PIC], -+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], -+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - - # - # Check to make sure the PIC flag actually works. -@@ -4165,6 +4533,8 @@ - _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], -+ [How to pass a linker flag through the compiler]) - # - # Check to make sure the static flag actually works. - # -@@ -4185,6 +4555,7 @@ - m4_defun([_LT_LINKER_SHLIBS], - [AC_REQUIRE([LT_PATH_LD])dnl - AC_REQUIRE([LT_PATH_NM])dnl -+m4_require([_LT_PATH_MANIFEST_TOOL])dnl - m4_require([_LT_FILEUTILS_DEFAULTS])dnl - m4_require([_LT_DECL_EGREP])dnl - m4_require([_LT_DECL_SED])dnl -@@ -4193,30 +4564,37 @@ - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ # Also, AIX nm treats weak defined symbols like other global defined -+ # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" -- ;; -+ ;; - cygwin* | mingw* | cegcc*) -- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -- linux* | k*bsd*-gnu) -- _LT_TAGVAR(link_all_deplibs, $1)=no -- ;; -+ case $cc_basename in -+ cl*) -+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' -+ ;; -+ *) -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] -+ ;; -+ esac -+ ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -+ ;; - esac -- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - ], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= -@@ -4231,7 +4609,6 @@ - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -@@ -4276,13 +4653,36 @@ - openbsd*) - with_gnu_ld=no - ;; -- linux* | k*bsd*-gnu) -- _LT_TAGVAR(link_all_deplibs, $1)=no -- ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes -+ -+ # On some targets, GNU ld is compatible enough with the native linker -+ # that we're better off using the native interface for both. -+ lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then -+ case $host_os in -+ aix*) -+ # The AIX port of GNU ld has always aspired to compatibility -+ # with the native linker. However, as the warning in the GNU ld -+ # block says, versions before 2.19.5* couldn't really create working -+ # shared libraries, regardless of the interface used. -+ case `$LD -v 2>&1` in -+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;; -+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; -+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; -+ *) -+ lt_use_gnu_ld_interface=yes -+ ;; -+ esac -+ ;; -+ *) -+ lt_use_gnu_ld_interface=yes -+ ;; -+ esac -+ fi -+ -+ if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - -@@ -4300,6 +4700,7 @@ - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in -+ *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -@@ -4315,11 +4716,12 @@ - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - --*** Warning: the GNU linker, at least up to release 2.9.1, is reported -+*** Warning: the GNU linker, at least up to release 2.19, is reported - *** to be unable to reliably create shared libraries on AIX. - *** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. -+*** really care for shared libraries, you may want to install binutils -+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -+*** You will then need to restart the configuration process. - - _LT_EOF - fi -@@ -4355,10 +4757,12 @@ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -@@ -4376,6 +4780,11 @@ - fi - ;; - -+ haiku*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -@@ -4391,7 +4800,7 @@ - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - -- gnu* | linux* | tpf* | k*bsd*-gnu) -+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in -@@ -4401,15 +4810,16 @@ - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then -- tmp_addflag= -+ tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler -- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; -- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers -- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ pgf77* | pgf90* | pgf95* | pgfortran*) -+ # Portland Group f77 and f90 compilers -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; -@@ -4420,13 +4830,17 @@ - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; -- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) -+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; -+ nvcc*) # Cuda Compiler Driver 2.2 -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(compiler_needs_object, $1)=yes -+ ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 -- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 -@@ -4442,17 +4856,16 @@ - fi - - case $cc_basename in -- xlf*) -+ xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' -- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' -- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ -- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' -+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac -@@ -4461,13 +4874,13 @@ - fi - ;; - -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - -@@ -4485,8 +4898,8 @@ - - _LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -@@ -4532,8 +4945,8 @@ - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -@@ -4573,8 +4986,10 @@ - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ # Also, AIX nm treats weak defined symbols like other global -+ # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi -@@ -4636,7 +5051,6 @@ - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi -- _LT_TAGVAR(link_all_deplibs, $1)=no - else - # not using gcc - if test "$host_cpu" = ia64; then -@@ -4662,9 +5076,9 @@ - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. -- _LT_SYS_MODULE_PATH_AIX -+ _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -@@ -4673,14 +5087,19 @@ - else - # Determine the default libpath from the value encoded in an - # empty executable. -- _LT_SYS_MODULE_PATH_AIX -+ _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -- # Exported symbols can be pulled into shared objects from archives -- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ if test "$with_gnu_ld" = yes; then -+ # We only use this code for GNU lds that support --whole-archive. -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ else -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -@@ -4712,20 +5131,64 @@ - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. -- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' -- # FIXME: Should let the user specify the lib program. -- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' -- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' -- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ case $cc_basename in -+ cl*) -+ # Native MSVC -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='@' -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; -+ else -+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; -+ fi~ -+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ -+ linknames=' -+ # The linker will not automatically build a static lib if we build a DLL. -+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' -+ # Don't use ranlib -+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' -+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ -+ lt_tool_outputfile="@TOOL_OUTPUT@"~ -+ case $lt_outputfile in -+ *.exe|*.EXE) ;; -+ *) -+ lt_outputfile="$lt_outputfile.exe" -+ lt_tool_outputfile="$lt_tool_outputfile.exe" -+ ;; -+ esac~ -+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then -+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; -+ $RM "$lt_outputfile.manifest"; -+ fi' -+ ;; -+ *) -+ # Assume MSVC wrapper -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' -+ # The linker will automatically build a .lib file if we build a DLL. -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' -+ # FIXME: Should let the user specify the lib program. -+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ ;; -+ esac - ;; - - darwin* | rhapsody*) -@@ -4738,10 +5201,6 @@ - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - -- freebsd1*) -- _LT_TAGVAR(ld_shlibs, $1)=no -- ;; -- - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little -@@ -4754,7 +5213,7 @@ - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -+ freebsd2.*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes -@@ -4763,7 +5222,7 @@ - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -@@ -4771,7 +5230,7 @@ - - hpux9*) - if test "$GCC" = yes; then -- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi -@@ -4786,14 +5245,13 @@ - ;; - - hpux10*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -@@ -4805,16 +5263,16 @@ - ;; - - hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else -@@ -4826,7 +5284,14 @@ - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) -- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ m4_if($1, [], [ -+ # Older versions of the 11.00 compiler do not understand -b yet -+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) -+ _LT_LINKER_OPTION([if $CC understands -b], -+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], -+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], -+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], -+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi -@@ -4854,19 +5319,34 @@ - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. -- save_LDFLAGS="$LDFLAGS" -- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -- AC_LINK_IFELSE(int foo(void) {}, -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -- ) -- LDFLAGS="$save_LDFLAGS" -+ # This should be the same for all languages, so no per-tag cache variable. -+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], -+ [lt_cv_irix_exported_symbol], -+ [save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -+ AC_LINK_IFELSE( -+ [AC_LANG_SOURCE( -+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], -+ [C++], [[int foo (void) { return 0; }]], -+ [Fortran 77], [[ -+ subroutine foo -+ end]], -+ [Fortran], [[ -+ subroutine foo -+ end]])])], -+ [lt_cv_irix_exported_symbol=yes], -+ [lt_cv_irix_exported_symbol=no]) -+ LDFLAGS="$save_LDFLAGS"]) -+ if test "$lt_cv_irix_exported_symbol" = yes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -+ fi - else -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -@@ -4875,7 +5355,7 @@ - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else -@@ -4928,17 +5408,17 @@ - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -@@ -4948,13 +5428,13 @@ - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ -- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -@@ -4967,9 +5447,9 @@ - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) -@@ -5145,36 +5625,38 @@ - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. -- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) -- $RM conftest* -- echo "$lt_simple_compile_test_code" > conftest.$ac_ext -- -- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) -- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) -- _LT_TAGVAR(allow_undefined_flag, $1)= -- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) -- then -- _LT_TAGVAR(archive_cmds_need_lc, $1)=no -- else -- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -- fi -- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $RM conftest* -- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) -+ AC_CACHE_CHECK([whether -lc should be explicitly linked in], -+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), -+ [$RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ -+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) -+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) -+ _LT_TAGVAR(allow_undefined_flag, $1)= -+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) -+ then -+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ else -+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ fi -+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ ]) -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi -@@ -5211,9 +5693,6 @@ - _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) --_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], -- [[If ld is used when linking, flag to hardcode $libdir into a binary -- during linking. This must work even if $libdir does not exist]]) - _LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) - _LT_TAGDECL([], [hardcode_direct], [0], -@@ -5239,8 +5718,6 @@ - to runtime path list]) - _LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) --_LT_TAGDECL([], [fix_srcfile_path], [1], -- [Fix the shell variable $srcfile for the compiler]) - _LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) - _LT_TAGDECL([], [export_symbols_cmds], [2], -@@ -5251,6 +5728,8 @@ - [Symbols that must always be exported]) - _LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -+_LT_TAGDECL([], [postlink_cmds], [2], -+ [Commands necessary for finishing linking programs]) - _LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) - dnl FIXME: Not yet implemented -@@ -5340,37 +5819,22 @@ - ])# _LT_LANG_C_CONFIG - - --# _LT_PROG_CXX --# ------------ --# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ --# compiler, we have our own version here. --m4_defun([_LT_PROG_CXX], --[ --pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) --AC_PROG_CXX --if test -n "$CXX" && ( test "X$CXX" != "Xno" && -- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -- (test "X$CXX" != "Xg++"))) ; then -- AC_PROG_CXXCPP --else -- _lt_caught_CXX_error=yes --fi --popdef([AC_MSG_ERROR]) --])# _LT_PROG_CXX -- --dnl aclocal-1.4 backwards compatibility: --dnl AC_DEFUN([_LT_PROG_CXX], []) -- -- - # _LT_LANG_CXX_CONFIG([TAG]) - # -------------------------- - # Ensure that the configuration variables for a C++ compiler are suitably - # defined. These variables are subsequently used by _LT_CONFIG to write - # the compiler configuration to `libtool'. - m4_defun([_LT_LANG_CXX_CONFIG], --[AC_REQUIRE([_LT_PROG_CXX])dnl --m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl - m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_PATH_MANIFEST_TOOL])dnl -+if test -n "$CXX" && ( test "X$CXX" != "Xno" && -+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -+ (test "X$CXX" != "Xg++"))) ; then -+ AC_PROG_CXXCPP -+else -+ _lt_caught_CXX_error=yes -+fi - - AC_LANG_PUSH(C++) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no -@@ -5382,7 +5846,6 @@ - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= --_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -@@ -5392,6 +5855,8 @@ - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(reload_flag, $1)=$reload_flag -+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - _LT_TAGVAR(no_undefined_flag, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -@@ -5423,6 +5888,7 @@ - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC -+ lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX -@@ -5440,6 +5906,7 @@ - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} -+ CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) -@@ -5461,8 +5928,8 @@ - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -@@ -5494,7 +5961,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no -@@ -5603,10 +6070,10 @@ - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. -- _LT_SYS_MODULE_PATH_AIX -+ _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - -- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -@@ -5615,14 +6082,19 @@ - else - # Determine the default libpath from the value encoded in an - # empty executable. -- _LT_SYS_MODULE_PATH_AIX -+ _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -- # Exported symbols can be pulled into shared objects from archives -- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ if test "$with_gnu_ld" = yes; then -+ # We only use this code for GNU lds that support --whole-archive. -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ else -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. -@@ -5652,28 +6124,75 @@ - ;; - - cygwin* | mingw* | pw32* | cegcc*) -- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -- # as there is no search path for DLLs. -- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_TAGVAR(always_export_symbols, $1)=no -- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -- -- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -- else -- _LT_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -+ case $GXX,$cc_basename in -+ ,cl* | no,cl*) -+ # Native MSVC -+ # hardcode_libdir_flag_spec is actually meaningless, as there is -+ # no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='@' -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; -+ else -+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; -+ fi~ -+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ -+ linknames=' -+ # The linker will not automatically build a static lib if we build a DLL. -+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ # Don't use ranlib -+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' -+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ -+ lt_tool_outputfile="@TOOL_OUTPUT@"~ -+ case $lt_outputfile in -+ *.exe|*.EXE) ;; -+ *) -+ lt_outputfile="$lt_outputfile.exe" -+ lt_tool_outputfile="$lt_tool_outputfile.exe" -+ ;; -+ esac~ -+ func_to_tool_file "$lt_outputfile"~ -+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then -+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; -+ $RM "$lt_outputfile.manifest"; -+ fi' -+ ;; -+ *) -+ # g++ -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -+ # as there is no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; -@@ -5696,7 +6215,7 @@ - esac - ;; - -- freebsd[[12]]*) -+ freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no -@@ -5715,6 +6234,11 @@ - gnu*) - ;; - -+ haiku*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: -@@ -5739,11 +6263,11 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then -- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no -@@ -5804,7 +6328,7 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then -@@ -5814,10 +6338,10 @@ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi -@@ -5847,7 +6371,7 @@ - case $cc_basename in - CC*) - # SGI C++ -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is -@@ -5858,9 +6382,9 @@ - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes -@@ -5871,7 +6395,7 @@ - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler -@@ -5889,7 +6413,7 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -@@ -5926,26 +6450,26 @@ - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in -- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) -+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ -- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' -+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ -- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ -+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; -- *) # Version 6 will use weak symbols -+ *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; -@@ -5953,7 +6477,7 @@ - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ -@@ -5972,9 +6496,9 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; -- xl*) -+ xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -@@ -5994,13 +6518,13 @@ - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. -- output_verbose_link_cmd='echo' -+ output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is -@@ -6069,7 +6593,7 @@ - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi -- output_verbose_link_cmd=echo -+ output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -@@ -6104,15 +6628,15 @@ - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ -- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ -+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; -@@ -6128,17 +6652,17 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - -@@ -6148,7 +6672,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support -@@ -6184,7 +6708,7 @@ - - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' -@@ -6205,7 +6729,7 @@ - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - -- output_verbose_link_cmd='echo' -+ output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is -@@ -6225,14 +6749,14 @@ - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then -- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. -@@ -6243,7 +6767,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' -@@ -6297,6 +6821,10 @@ - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ -+ '"$_LT_TAGVAR(old_archive_cmds, $1)" -+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ -+ '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -@@ -6352,6 +6880,7 @@ - fi # test -n "$compiler" - - CC=$lt_save_CC -+ CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC -@@ -6366,6 +6895,29 @@ - ])# _LT_LANG_CXX_CONFIG - - -+# _LT_FUNC_STRIPNAME_CNF -+# ---------------------- -+# func_stripname_cnf prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# -+# This function is identical to the (non-XSI) version of func_stripname, -+# except this one can be used by m4 code that may be executed by configure, -+# rather than the libtool script. -+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -+AC_REQUIRE([_LT_DECL_SED]) -+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -+func_stripname_cnf () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; -+ esac -+} # func_stripname_cnf -+])# _LT_FUNC_STRIPNAME_CNF -+ - # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) - # --------------------------------- - # Figure out "hidden" library dependencies from verbose -@@ -6374,6 +6926,7 @@ - # objects, libraries and library flags. - m4_defun([_LT_SYS_HIDDEN_LIBDEPS], - [m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl - # Dependencies to place before and after the object being linked: - _LT_TAGVAR(predep_objects, $1)= - _LT_TAGVAR(postdep_objects, $1)= -@@ -6423,7 +6976,20 @@ - } - }; - _LT_EOF -+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF -+package foo -+func foo() { -+} -+_LT_EOF - ]) -+ -+_lt_libdeps_save_CFLAGS=$CFLAGS -+case "$CC $CFLAGS " in #( -+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -+esac -+ - dnl Parse the compiler output and extract the necessary - dnl objects, libraries and library flags. - if AC_TRY_EVAL(ac_compile); then -@@ -6435,7 +7001,7 @@ - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do -- case $p in -+ case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. -@@ -6444,13 +7010,22 @@ - test $p = "-R"; then - prev=$p - continue -- else -- prev= - fi - -+ # Expand the sysroot to ease extracting the directories later. -+ if test -z "$prev"; then -+ case $p in -+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; -+ esac -+ fi -+ case $p in -+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; -+ esac - if test "$pre_test_object_deps_done" = no; then -- case $p in -- -L* | -R*) -+ case ${prev} in -+ -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. -@@ -6470,8 +7045,10 @@ - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi -+ prev= - ;; - -+ *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. -@@ -6507,6 +7084,7 @@ - fi - - $RM -f confest.$objext -+CFLAGS=$_lt_libdeps_save_CFLAGS - - # PORTME: override above test on systems where it is broken - m4_if([$1], [CXX], -@@ -6543,7 +7121,7 @@ - - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as -@@ -6587,32 +7165,16 @@ - ])# _LT_SYS_HIDDEN_LIBDEPS - - --# _LT_PROG_F77 --# ------------ --# Since AC_PROG_F77 is broken, in that it returns the empty string --# if there is no fortran compiler, we have our own version here. --m4_defun([_LT_PROG_F77], --[ --pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) --AC_PROG_F77 --if test -z "$F77" || test "X$F77" = "Xno"; then -- _lt_disable_F77=yes --fi --popdef([AC_MSG_ERROR]) --])# _LT_PROG_F77 -- --dnl aclocal-1.4 backwards compatibility: --dnl AC_DEFUN([_LT_PROG_F77], []) -- -- - # _LT_LANG_F77_CONFIG([TAG]) - # -------------------------- - # Ensure that the configuration variables for a Fortran 77 compiler are - # suitably defined. These variables are subsequently used by _LT_CONFIG - # to write the compiler configuration to `libtool'. - m4_defun([_LT_LANG_F77_CONFIG], --[AC_REQUIRE([_LT_PROG_F77])dnl --AC_LANG_PUSH(Fortran 77) -+[AC_LANG_PUSH(Fortran 77) -+if test -z "$F77" || test "X$F77" = "Xno"; then -+ _lt_disable_F77=yes -+fi - - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(allow_undefined_flag, $1)= -@@ -6622,7 +7184,6 @@ - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= --_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=no -@@ -6631,6 +7192,8 @@ - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(reload_flag, $1)=$reload_flag -+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - _LT_TAGVAR(no_undefined_flag, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -@@ -6670,7 +7233,9 @@ - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC -+ lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} -+ CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) -@@ -6724,38 +7289,24 @@ - - GCC=$lt_save_GCC - CC="$lt_save_CC" -+ CFLAGS="$lt_save_CFLAGS" - fi # test "$_lt_disable_F77" != yes - - AC_LANG_POP - ])# _LT_LANG_F77_CONFIG - - --# _LT_PROG_FC --# ----------- --# Since AC_PROG_FC is broken, in that it returns the empty string --# if there is no fortran compiler, we have our own version here. --m4_defun([_LT_PROG_FC], --[ --pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) --AC_PROG_FC --if test -z "$FC" || test "X$FC" = "Xno"; then -- _lt_disable_FC=yes --fi --popdef([AC_MSG_ERROR]) --])# _LT_PROG_FC -- --dnl aclocal-1.4 backwards compatibility: --dnl AC_DEFUN([_LT_PROG_FC], []) -- -- - # _LT_LANG_FC_CONFIG([TAG]) - # ------------------------- - # Ensure that the configuration variables for a Fortran compiler are - # suitably defined. These variables are subsequently used by _LT_CONFIG - # to write the compiler configuration to `libtool'. - m4_defun([_LT_LANG_FC_CONFIG], --[AC_REQUIRE([_LT_PROG_FC])dnl --AC_LANG_PUSH(Fortran) -+[AC_LANG_PUSH(Fortran) -+ -+if test -z "$FC" || test "X$FC" = "Xno"; then -+ _lt_disable_FC=yes -+fi - - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(allow_undefined_flag, $1)= -@@ -6765,7 +7316,6 @@ - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= --_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=no -@@ -6774,6 +7324,8 @@ - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(reload_flag, $1)=$reload_flag -+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - _LT_TAGVAR(no_undefined_flag, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -@@ -6813,7 +7365,9 @@ - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC -+ lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} -+ CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - -@@ -6869,7 +7423,8 @@ - fi # test -n "$compiler" - - GCC=$lt_save_GCC -- CC="$lt_save_CC" -+ CC=$lt_save_CC -+ CFLAGS=$lt_save_CFLAGS - fi # test "$_lt_disable_FC" != yes - - AC_LANG_POP -@@ -6906,10 +7461,12 @@ - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. --lt_save_CC="$CC" -+lt_save_CC=$CC -+lt_save_CFLAGS=$CFLAGS - lt_save_GCC=$GCC - GCC=yes - CC=${GCJ-"gcj"} -+CFLAGS=$GCJFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_TAGVAR(LD, $1)="$LD" -@@ -6919,6 +7476,8 @@ - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - - _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(reload_flag, $1)=$reload_flag -+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - - if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) -@@ -6934,10 +7493,78 @@ - AC_LANG_RESTORE - - GCC=$lt_save_GCC --CC="$lt_save_CC" -+CC=$lt_save_CC -+CFLAGS=$lt_save_CFLAGS - ])# _LT_LANG_GCJ_CONFIG - - -+# _LT_LANG_GO_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for the GNU Go compiler -+# are suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_GO_CONFIG], -+[AC_REQUIRE([LT_PROG_GO])dnl -+AC_LANG_SAVE -+ -+# Source file extension for Go test sources. -+ac_ext=go -+ -+# Object file extension for compiled Go test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext -+ -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="package main; func main() { }" -+ -+# Code to be used in simple link tests -+lt_simple_link_test_code='package main; func main() { }' -+ -+# ltmain only uses $CC for tagged configurations so make sure $CC is set. -+_LT_TAG_COMPILER -+ -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE -+ -+# Allow CC to be a program name with arguments. -+lt_save_CC=$CC -+lt_save_CFLAGS=$CFLAGS -+lt_save_GCC=$GCC -+GCC=yes -+CC=${GOC-"gccgo"} -+CFLAGS=$GOFLAGS -+compiler=$CC -+_LT_TAGVAR(compiler, $1)=$CC -+_LT_TAGVAR(LD, $1)="$LD" -+_LT_CC_BASENAME([$compiler]) -+ -+# Go did not exist at the time GCC didn't implicitly link libc in. -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(reload_flag, $1)=$reload_flag -+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -+ -+if test -n "$compiler"; then -+ _LT_COMPILER_NO_RTTI($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ -+ _LT_CONFIG($1) -+fi -+ -+AC_LANG_RESTORE -+ -+GCC=$lt_save_GCC -+CC=$lt_save_CC -+CFLAGS=$lt_save_CFLAGS -+])# _LT_LANG_GO_CONFIG -+ -+ - # _LT_LANG_RC_CONFIG([TAG]) - # ------------------------- - # Ensure that the configuration variables for the Windows resource compiler -@@ -6969,9 +7596,11 @@ - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" -+lt_save_CFLAGS=$CFLAGS - lt_save_GCC=$GCC - GCC= - CC=${RC-"windres"} -+CFLAGS= - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) -@@ -6984,7 +7613,8 @@ - - GCC=$lt_save_GCC - AC_LANG_RESTORE --CC="$lt_save_CC" -+CC=$lt_save_CC -+CFLAGS=$lt_save_CFLAGS - ])# _LT_LANG_RC_CONFIG - - -@@ -7004,6 +7634,13 @@ - dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -+# LT_PROG_GO -+# ---------- -+AC_DEFUN([LT_PROG_GO], -+[AC_CHECK_TOOL(GOC, gccgo,) -+]) -+ -+ - # LT_PROG_RC - # ---------- - AC_DEFUN([LT_PROG_RC], -@@ -7043,6 +7680,15 @@ - AC_SUBST([OBJDUMP]) - ]) - -+# _LT_DECL_DLLTOOL -+# ---------------- -+# Ensure DLLTOOL variable is set. -+m4_defun([_LT_DECL_DLLTOOL], -+[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -+test -z "$DLLTOOL" && DLLTOOL=dlltool -+_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -+AC_SUBST([DLLTOOL]) -+]) - - # _LT_DECL_SED - # ------------ -@@ -7134,8 +7780,8 @@ - # Try some XSI features - xsi_shell=no - ( _lt_dummy="a/b/c" -- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ -- = c,a/b,, \ -+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ -+ = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -@@ -7174,222 +7820,177 @@ - ])# _LT_CHECK_SHELL_FEATURES - - --# _LT_PROG_XSI_SHELLFNS --# --------------------- --# Bourne and XSI compatible variants of some useful shell functions. --m4_defun([_LT_PROG_XSI_SHELLFNS], --[case $xsi_shell in -- yes) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_dirname file append nondir_replacement --# Compute the dirname of FILE. If nonempty, add APPEND to the result, --# otherwise set result to NONDIR_REPLACEMENT. --func_dirname () --{ -- case ${1} in -- */*) func_dirname_result="${1%/*}${2}" ;; -- * ) func_dirname_result="${3}" ;; -- esac --} -- --# func_basename file --func_basename () --{ -- func_basename_result="${1##*/}" --} -- --# func_dirname_and_basename file append nondir_replacement --# perform func_basename and func_dirname in a single function --# call: --# dirname: Compute the dirname of FILE. If nonempty, --# add APPEND to the result, otherwise set result --# to NONDIR_REPLACEMENT. --# value returned in "$func_dirname_result" --# basename: Compute filename of FILE. --# value retuned in "$func_basename_result" --# Implementation must be kept synchronized with func_dirname --# and func_basename. For efficiency, we do not delegate to --# those functions but instead duplicate the functionality here. --func_dirname_and_basename () --{ -- case ${1} in -- */*) func_dirname_result="${1%/*}${2}" ;; -- * ) func_dirname_result="${3}" ;; -- esac -- func_basename_result="${1##*/}" --} -- --# func_stripname prefix suffix name --# strip PREFIX and SUFFIX off of NAME. --# PREFIX and SUFFIX must not contain globbing or regex special --# characters, hashes, percent signs, but SUFFIX may contain a leading --# dot (in which case that matches only a dot). --func_stripname () --{ -- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -- # positional parameters, so assign one to ordinary parameter first. -- func_stripname_result=${3} -- func_stripname_result=${func_stripname_result#"${1}"} -- func_stripname_result=${func_stripname_result%"${2}"} --} -- --# func_opt_split --func_opt_split () --{ -- func_opt_split_opt=${1%%=*} -- func_opt_split_arg=${1#*=} --} -- --# func_lo2o object --func_lo2o () --{ -- case ${1} in -- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -- *) func_lo2o_result=${1} ;; -- esac --} -- --# func_xform libobj-or-source --func_xform () --{ -- func_xform_result=${1%.*}.lo --} -- --# func_arith arithmetic-term... --func_arith () --{ -- func_arith_result=$(( $[*] )) --} -+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -+# ------------------------------------------------------ -+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -+m4_defun([_LT_PROG_FUNCTION_REPLACE], -+[dnl { -+sed -e '/^$1 ()$/,/^} # $1 /c\ -+$1 ()\ -+{\ -+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+]) - --# func_len string --# STRING may not start with a hyphen. --func_len () --{ -- func_len_result=${#1} --} - --_LT_EOF -- ;; -- *) # Bourne compatible functions. -- cat << \_LT_EOF >> "$cfgfile" -+# _LT_PROG_REPLACE_SHELLFNS -+# ------------------------- -+# Replace existing portable implementations of several shell functions with -+# equivalent extended shell implementations where those features are available.. -+m4_defun([_LT_PROG_REPLACE_SHELLFNS], -+[if test x"$xsi_shell" = xyes; then -+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac]) -+ -+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl -+ func_basename_result="${1##*/}"]) -+ -+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+ func_basename_result="${1##*/}"]) - --# func_dirname file append nondir_replacement --# Compute the dirname of FILE. If nonempty, add APPEND to the result, --# otherwise set result to NONDIR_REPLACEMENT. --func_dirname () --{ -- # Extract subdirectory from the argument. -- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -- if test "X$func_dirname_result" = "X${1}"; then -- func_dirname_result="${3}" -- else -- func_dirname_result="$func_dirname_result${2}" -- fi --} -+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl -+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -+ # positional parameters, so assign one to ordinary parameter first. -+ func_stripname_result=${3} -+ func_stripname_result=${func_stripname_result#"${1}"} -+ func_stripname_result=${func_stripname_result%"${2}"}]) - --# func_basename file --func_basename () --{ -- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` --} -+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl -+ func_split_long_opt_name=${1%%=*} -+ func_split_long_opt_arg=${1#*=}]) - --dnl func_dirname_and_basename --dnl A portable version of this function is already defined in general.m4sh --dnl so there is no need for it here. -+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl -+ func_split_short_opt_arg=${1#??} -+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - --# func_stripname prefix suffix name --# strip PREFIX and SUFFIX off of NAME. --# PREFIX and SUFFIX must not contain globbing or regex special --# characters, hashes, percent signs, but SUFFIX may contain a leading --# dot (in which case that matches only a dot). --# func_strip_suffix prefix name --func_stripname () --{ -- case ${2} in -- .*) func_stripname_result=`$ECHO "X${3}" \ -- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; -- *) func_stripname_result=`$ECHO "X${3}" \ -- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; -- esac --} -+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl -+ case ${1} in -+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -+ *) func_lo2o_result=${1} ;; -+ esac]) - --# sed scripts: --my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' --my_sed_long_arg='1s/^-[[^=]]*=//' -+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - --# func_opt_split --func_opt_split () --{ -- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` -- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` --} -+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - --# func_lo2o object --func_lo2o () --{ -- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` --} -+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -+fi - --# func_xform libobj-or-source --func_xform () --{ -- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` --} -+if test x"$lt_shell_append" = xyes; then -+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - --# func_arith arithmetic-term... --func_arith () --{ -- func_arith_result=`expr "$[@]"` --} -+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl -+ func_quote_for_eval "${2}" -+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ -+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - --# func_len string --# STRING may not start with a hyphen. --func_len () --{ -- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` --} -+ # Save a `func_append' function call where possible by direct use of '+=' -+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+ test 0 -eq $? || _lt_function_replace_fail=: -+else -+ # Save a `func_append' function call even when '+=' is not available -+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+ test 0 -eq $? || _lt_function_replace_fail=: -+fi - --_LT_EOF --esac -+if test x"$_lt_function_replace_fail" = x":"; then -+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -+fi -+]) - --case $lt_shell_append in -- yes) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_append var value --# Append VALUE to the end of shell variable VAR. --func_append () --{ -- eval "$[1]+=\$[2]" --} --_LT_EOF -+# _LT_PATH_CONVERSION_FUNCTIONS -+# ----------------------------- -+# Determine which file name conversion functions should be used by -+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -+# for certain cross-compile configurations and native mingw. -+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+AC_MSG_CHECKING([how to convert $build file names to $host format]) -+AC_CACHE_VAL(lt_cv_to_host_file_cmd, -+[case $host in -+ *-*-mingw* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 -+ ;; -+ *-*-cygwin* ) -+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 -+ ;; -+ * ) # otherwise, assume *nix -+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 -+ ;; -+ esac - ;; -- *) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_append var value --# Append VALUE to the end of shell variable VAR. --func_append () --{ -- eval "$[1]=\$$[1]\$[2]" --} -- --_LT_EOF -+ *-*-cygwin* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin -+ ;; -+ *-*-cygwin* ) -+ lt_cv_to_host_file_cmd=func_convert_file_noop -+ ;; -+ * ) # otherwise, assume *nix -+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin -+ ;; -+ esac - ;; -- esac -+ * ) # unhandled hosts (and "normal" native builds) -+ lt_cv_to_host_file_cmd=func_convert_file_noop -+ ;; -+esac - ]) -+to_host_file_cmd=$lt_cv_to_host_file_cmd -+AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], -+ [0], [convert $build file names to $host format])dnl -+ -+AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -+AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -+[#assume ordinary cross tools, or native build. -+lt_cv_to_tool_file_cmd=func_convert_file_noop -+case $host in -+ *-*-mingw* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 -+ ;; -+ esac -+ ;; -+esac -+]) -+to_tool_file_cmd=$lt_cv_to_tool_file_cmd -+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], -+ [0], [convert $build files to toolchain format])dnl -+])# _LT_PATH_CONVERSION_FUNCTIONS - - # Helper functions for option handling. -*- Autoconf -*- - # --# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -+# Inc. - # Written by Gary V. Vaughan, 2004 - # - # This file is free software; the Free Software Foundation gives - # unlimited permission to copy and/or distribute it, with or without - # modifications, as long as this notice is preserved. - --# serial 6 ltoptions.m4 -+# serial 7 ltoptions.m4 - - # This is to help aclocal find these macros, as it can't see m4_define. - AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) -@@ -7504,7 +8105,7 @@ - [enable_win32_dll=yes - - case $host in --*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) -+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) -@@ -7512,13 +8113,13 @@ - esac - - test -z "$AS" && AS=as --_LT_DECL([], [AS], [0], [Assembler program])dnl -+_LT_DECL([], [AS], [1], [Assembler program])dnl - - test -z "$DLLTOOL" && DLLTOOL=dlltool --_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl -+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - - test -z "$OBJDUMP" && OBJDUMP=objdump --_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl - ])# win32-dll - - AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -@@ -7704,9 +8305,24 @@ - # MODE is either `yes' or `no'. If omitted, it defaults to `both'. - m4_define([_LT_WITH_PIC], - [AC_ARG_WITH([pic], -- [AS_HELP_STRING([--with-pic], -+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], -- [pic_mode="$withval"], -+ [lt_p=${PACKAGE-default} -+ case $withval in -+ yes|no) pic_mode=$withval ;; -+ *) -+ pic_mode=default -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for lt_pkg in $withval; do -+ IFS="$lt_save_ifs" -+ if test "X$lt_pkg" = "X$lt_p"; then -+ pic_mode=yes -+ fi -+ done -+ IFS="$lt_save_ifs" -+ ;; -+ esac], - [pic_mode=default]) - - test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) -@@ -7876,31 +8492,31 @@ - # unlimited permission to copy and/or distribute it, with or without - # modifications, as long as this notice is preserved. - --# Generated from ltversion.in. -+# @configure_input@ - --# serial 3012 ltversion.m4 -+# serial 3337 ltversion.m4 - # This file is part of GNU Libtool - --m4_define([LT_PACKAGE_VERSION], [2.2.6]) --m4_define([LT_PACKAGE_REVISION], [1.3012]) -+m4_define([LT_PACKAGE_VERSION], [2.4.2]) -+m4_define([LT_PACKAGE_REVISION], [1.3337]) - - AC_DEFUN([LTVERSION_VERSION], --[macro_version='2.2.6' --macro_revision='1.3012' -+[macro_version='2.4.2' -+macro_revision='1.3337' - _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) - _LT_DECL(, macro_revision, 0) - ]) - - # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- - # --# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. - # Written by Scott James Remnant, 2004. - # - # This file is free software; the Free Software Foundation gives - # unlimited permission to copy and/or distribute it, with or without - # modifications, as long as this notice is preserved. - --# serial 4 lt~obsolete.m4 -+# serial 5 lt~obsolete.m4 - - # These exist entirely to fool aclocal when bootstrapping libtool. - # -@@ -7970,7 +8586,6 @@ - m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) - m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) - m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) --m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) - m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) - m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) - m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -@@ -7983,8 +8598,16 @@ - m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) - m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) - m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) - - # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -+# serial 1 (pkg-config-0.24) - # - # Copyright © 2004 Scott James Remnant <scott@netsplit.com>. - # -@@ -8011,8 +8634,12 @@ - # ---------------------------------- - AC_DEFUN([PKG_PROG_PKG_CONFIG], - [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) --m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) --AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl -+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) -+ - if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) - fi -@@ -8025,7 +8652,6 @@ - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -- - fi[]dnl - ])# PKG_PROG_PKG_CONFIG - -@@ -8034,34 +8660,32 @@ - # Check to see whether a particular set of modules exists. Similar - # to PKG_CHECK_MODULES(), but does not set variables or print errors. - # --# --# Similar to PKG_CHECK_MODULES, make sure that the first instance of --# this or PKG_CHECK_MODULES is called, or make sure to call --# PKG_CHECK_EXISTS manually -+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -+# only at the first occurence in configure.ac, so if the first place -+# it's called might be skipped (such as if it is within an "if", you -+# have to call PKG_CHECK_EXISTS manually - # -------------------------------------------------------------- - AC_DEFUN([PKG_CHECK_EXISTS], - [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl - if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then -- m4_ifval([$2], [$2], [:]) -+ m4_default([$2], [:]) - m4_ifvaln([$3], [else - $3])dnl - fi]) - -- - # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) - # --------------------------------------------- - m4_define([_PKG_CONFIG], --[if test -n "$PKG_CONFIG"; then -- if test -n "$$1"; then -- pkg_cv_[]$1="$$1" -- else -- PKG_CHECK_EXISTS([$3], -- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], -- [pkg_failed=yes]) -- fi --else -- pkg_failed=untried -+[if test -n "$$1"; then -+ pkg_cv_[]$1="$$1" -+ elif test -n "$PKG_CONFIG"; then -+ PKG_CHECK_EXISTS([$3], -+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes ], -+ [pkg_failed=yes]) -+ else -+ pkg_failed=untried - fi[]dnl - ])# _PKG_CONFIG - -@@ -8103,16 +8727,17 @@ - See the pkg-config man page for more details.]) - - if test $pkg_failed = yes; then -+ AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then -- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` -+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else -- $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` -+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - -- ifelse([$4], , [AC_MSG_ERROR(dnl -+ m4_default([$4], [AC_MSG_ERROR( - [Package requirements ($2) were not met: - - $$1_PKG_ERRORS -@@ -8120,25 +8745,24 @@ - Consider adjusting the PKG_CONFIG_PATH environment variable if you - installed software in a non-standard prefix. - --_PKG_TEXT --])], -- [AC_MSG_RESULT([no]) -- $4]) -+_PKG_TEXT])[]dnl -+ ]) - elif test $pkg_failed = untried; then -- ifelse([$4], , [AC_MSG_FAILURE(dnl -+ AC_MSG_RESULT([no]) -+ m4_default([$4], [AC_MSG_FAILURE( - [The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - - _PKG_TEXT - --To get pkg-config, see <http://pkg-config.freedesktop.org/>.])], -- [$4]) -+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl -+ ]) - else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) -- ifelse([$3], , :, [$3]) -+ $3 - fi[]dnl - ])# PKG_CHECK_MODULES - -@@ -8157,7 +8781,7 @@ - [am__api_version='1.11' - dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to - dnl require some minimum version. Point them to the right macro. --m4_if([$1], [1.11], [], -+m4_if([$1], [1.11.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl - ]) - -@@ -8173,7 +8797,7 @@ - # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. - # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. - AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], --[AM_AUTOMAKE_VERSION([1.11])dnl -+[AM_AUTOMAKE_VERSION([1.11.1])dnl - m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl - _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) -Only in src/hal-0.5.14: autom4te.cache -Only in src/hal-0.5.14: config.h -Only in src/hal-0.5.14: config.log -Only in src/hal-0.5.14: config.status -diff -u -r hal-0.5.14/configure src/hal-0.5.14/configure ---- hal-0.5.14/configure 2009-11-30 23:22:33.000000000 +0100 -+++ src/hal-0.5.14/configure 2011-12-19 20:40:11.000000000 +0100 -@@ -1,13 +1,15 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.64 for hal 0.5.14. -+# Generated by GNU Autoconf 2.68 for hal 0.5.14. - # - # Report bugs to <david@fubar.dk>. - # -+# - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, --# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software -+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software - # Foundation, Inc. - # -+# - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. - ## -------------------- ## -@@ -89,6 +91,7 @@ - IFS=" "" $as_nl" - - # Find who we are. Look in the path if we contain no directory separator. -+as_myself= - case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -@@ -171,7 +174,15 @@ - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 --test \$(( 1 + 1 )) = 2 || exit 1" -+test \$(( 1 + 1 )) = 2 || exit 1 -+ -+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( -+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO -+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO -+ PATH=/empty FPATH=/empty; export PATH FPATH -+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ -+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes - else -@@ -214,11 +225,18 @@ - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. -+ # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+ case $- in # (((( -+ *v*x* | *x*v* ) as_opts=-vx ;; -+ *v* ) as_opts=-v ;; -+ *x* ) as_opts=-x ;; -+ * ) as_opts= ;; -+ esac -+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} - fi - - if test x$as_have_required = xno; then : -@@ -317,7 +335,7 @@ - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" -- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" -+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - - } # as_fn_mkdir_p -@@ -357,19 +375,19 @@ - fi # as_fn_arith - - --# as_fn_error ERROR [LINENO LOG_FD] --# --------------------------------- -+# as_fn_error STATUS ERROR [LINENO LOG_FD] -+# ---------------------------------------- - # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are - # provided, also output the error to LOG_FD, referencing LINENO. Then exit the --# script with status $?, using 1 if that was 0. -+# script with STATUS, using 1 if that was 0. - as_fn_error () - { -- as_status=$?; test $as_status -eq 0 && as_status=1 -- if test "$3"; then -- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 -+ as_status=$1; test $as_status -eq 0 && as_status=1 -+ if test "$4"; then -+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi -- $as_echo "$as_me: error: $1" >&2 -+ $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status - } # as_fn_error - -@@ -526,160 +544,14 @@ - # Sed expression to map a string onto a valid variable name. - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -- -- --# Check that we are running under the correct shell. - SHELL=${CONFIG_SHELL-/bin/sh} - --case X$lt_ECHO in --X*--fallback-echo) -- # Remove one level of quotation (which was required for Make). -- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` -- ;; --esac -- --ECHO=${lt_ECHO-echo} --if test "X$1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X$1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then -- # Yippee, $ECHO works! -- : --else -- # Restart under the correct shell. -- exec $SHELL "$0" --no-reexec ${1+"$@"} --fi -- --if test "X$1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat <<_LT_EOF --$* --_LT_EOF -- exit 0 --fi -- --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- --if test -z "$lt_ECHO"; then -- if test "X${echo_test_string+set}" != Xset; then -- # find a string as large as possible, as long as the shell can cope with it -- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do -- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -- if { echo_test_string=`eval $cmd`; } 2>/dev/null && -- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null -- then -- break -- fi -- done -- fi -- -- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- : -- else -- # The Solaris, AIX, and Digital Unix default echo programs unquote -- # backslashes. This makes it impossible to quote backslashes using -- # echo "$something" | sed 's/\\/\\\\/g' -- # -- # So, first we look for a working echo in the user's PATH. -- -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for dir in $PATH /usr/ucb; do -- IFS="$lt_save_ifs" -- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- ECHO="$dir/echo" -- break -- fi -- done -- IFS="$lt_save_ifs" -- -- if test "X$ECHO" = Xecho; then -- # We didn't find a better echo, so look for alternatives. -- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # This shell has a builtin print -r that does the trick. -- ECHO='print -r' -- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && -- test "X$CONFIG_SHELL" != X/bin/ksh; then -- # If we have ksh, try running configure again with it. -- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -- export ORIGINAL_CONFIG_SHELL -- CONFIG_SHELL=/bin/ksh -- export CONFIG_SHELL -- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} -- else -- # Try using printf. -- ECHO='printf %s\n' -- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # Cool, printf works -- : -- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -- export CONFIG_SHELL -- SHELL="$CONFIG_SHELL" -- export SHELL -- ECHO="$CONFIG_SHELL $0 --fallback-echo" -- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- ECHO="$CONFIG_SHELL $0 --fallback-echo" -- else -- # maybe with a smaller string... -- prev=: -- -- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do -- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null -- then -- break -- fi -- prev="$cmd" -- done -- -- if test "$prev" != 'sed 50q "$0"'; then -- echo_test_string=`eval $prev` -- export echo_test_string -- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} -- else -- # Oops. We lost completely, so just stick with echo. -- ECHO=echo -- fi -- fi -- fi -- fi -- fi --fi -- --# Copy echo and quote the copy suitably for passing to libtool from --# the Makefile, instead of quoting the original, which is used later. --lt_ECHO=$ECHO --if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then -- lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" --fi -- -- -- - --exec 7<&0 </dev/null 6>&1 -+test -n "$DJDIR" || exec 7<&0 </dev/null -+exec 6>&1 - - # Name of the host. --# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, - # so uname gets run too. - ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -@@ -860,6 +732,8 @@ - USB_IDS_DIR - PCI_IDS_DIR - udev_prefix -+PKG_CONFIG_LIBDIR -+PKG_CONFIG_PATH - PKG_CONFIG - CXXCPP - OTOOL64 -@@ -867,9 +741,11 @@ - LIPO - NMEDIT - DSYMUTIL --lt_ECHO -+MANIFEST_TOOL - RANLIB -+ac_ct_AR - AR -+DLLTOOL - OBJDUMP - LN_S - NM -@@ -992,6 +868,7 @@ - with_pic - enable_fast_install - with_gnu_ld -+with_sysroot - enable_libtool_lock - enable_largefile - with_os_type -@@ -1058,6 +935,8 @@ - CPP - CXXCPP - PKG_CONFIG -+PKG_CONFIG_PATH -+PKG_CONFIG_LIBDIR - PARTED_CFLAGS - PARTED_LIBS - POLKIT_CFLAGS -@@ -1132,8 +1011,9 @@ - fi - - case $ac_option in -- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -- *) ac_optarg=yes ;; -+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *=) ac_optarg= ;; -+ *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. -@@ -1178,7 +1058,7 @@ - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error "invalid feature name: $ac_useropt" -+ as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in -@@ -1204,7 +1084,7 @@ - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error "invalid feature name: $ac_useropt" -+ as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in -@@ -1408,7 +1288,7 @@ - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error "invalid package name: $ac_useropt" -+ as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in -@@ -1424,7 +1304,7 @@ - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error "invalid package name: $ac_useropt" -+ as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in -@@ -1454,8 +1334,8 @@ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - -- -*) as_fn_error "unrecognized option: \`$ac_option' --Try \`$0 --help' for more information." -+ -*) as_fn_error $? "unrecognized option: \`$ac_option' -+Try \`$0 --help' for more information" - ;; - - *=*) -@@ -1463,7 +1343,7 @@ - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) -- as_fn_error "invalid variable name: \`$ac_envvar'" ;; -+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; -@@ -1473,7 +1353,7 @@ - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} -+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -@@ -1481,13 +1361,13 @@ - - if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` -- as_fn_error "missing argument to $ac_option" -+ as_fn_error $? "missing argument to $ac_option" - fi - - if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; -- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; -+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac - fi -@@ -1510,7 +1390,7 @@ - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" -+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -1524,8 +1404,8 @@ - if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe -- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -- If a cross compiler is detected then cross compile mode will be used." >&2 -+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -@@ -1540,9 +1420,9 @@ - ac_pwd=`pwd` && test -n "$ac_pwd" && - ac_ls_di=`ls -di .` && - ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -- as_fn_error "working directory cannot be determined" -+ as_fn_error $? "working directory cannot be determined" - test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -- as_fn_error "pwd does not report name of working directory" -+ as_fn_error $? "pwd does not report name of working directory" - - - # Find the source files, if location was not specified. -@@ -1581,11 +1461,11 @@ - fi - if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" -+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" - fi - ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" - ac_abs_confdir=`( -- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" -+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` - # When building in place, set srcdir=. - if test "$ac_abs_confdir" = "$ac_pwd"; then -@@ -1625,7 +1505,7 @@ - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit -- -q, --quiet, --silent do not print \`checking...' messages -+ -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files -@@ -1708,7 +1588,7 @@ - --enable-verbose-mode support verbose debug mode - --enable-docbook-docs build documentation (requires xmlto) - --enable-man-pages build manual pages -- --enable-gtk-doc use gtk-doc to build documentation default=yes -+ --enable-gtk-doc use gtk-doc to build documentation [default=yes] - --disable-acpi-acpid Do not use ACPI daemon event source - --disable-acpi-proc Do not use ACPI kernel-interface directly - --enable-acpi-ibm Forward IBM ACPI events -@@ -1729,9 +1609,11 @@ - Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -- --with-pic try to use only PIC/non-PIC objects [default=use -+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] -+ --with-sysroot=DIR Search for dependent libraries within DIR -+ (or the compiler's sysroot if not specified). - --with-os-type=<os> Distribution or OS (redhat) - --with-pid-file=<file> PID file for HAL daemon - --with-hwdata=<dir> Where PCI and USB IDs are found -@@ -1766,13 +1648,17 @@ - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> -- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if -+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CPP C preprocessor - CXXCPP C++ preprocessor - PKG_CONFIG path to pkg-config utility -+ PKG_CONFIG_PATH -+ directories to add to pkg-config's search path -+ PKG_CONFIG_LIBDIR -+ path overriding pkg-config's built-in search path - PARTED_CFLAGS - C compiler flags for PARTED, overriding pkg-config - PARTED_LIBS linker flags for PARTED, overriding pkg-config -@@ -1858,9 +1744,9 @@ - if $ac_init_version; then - cat <<\_ACEOF - hal configure 0.5.14 --generated by GNU Autoconf 2.64 -+generated by GNU Autoconf 2.68 - --Copyright (C) 2009 Free Software Foundation, Inc. -+Copyright (C) 2010 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF -@@ -1904,8 +1790,8 @@ - - ac_retval=1 - fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_c_try_compile - -@@ -1950,8 +1836,8 @@ - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_c_try_link - -@@ -1988,8 +1874,8 @@ - - ac_retval=1 - fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_cxx_try_compile - -@@ -2014,7 +1900,7 @@ - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } >/dev/null && { -+ test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : -@@ -2025,8 +1911,8 @@ - - ac_retval=1 - fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_c_try_cpp - -@@ -2067,8 +1953,8 @@ - ac_retval=$ac_status - fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_c_try_run - -@@ -2081,7 +1967,7 @@ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 - $as_echo_n "checking for $2... " >&6; } --if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -2099,7 +1985,7 @@ - eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - - } # ac_fn_c_check_header_compile - -@@ -2111,7 +1997,7 @@ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 - $as_echo_n "checking for $2... " >&6; } --if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -2166,7 +2052,7 @@ - eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - - } # ac_fn_c_check_func - -@@ -2191,7 +2077,7 @@ - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } >/dev/null && { -+ test $ac_status = 0; } > conftest.i && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then : -@@ -2202,8 +2088,8 @@ - - ac_retval=1 - fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_cxx_try_cpp - -@@ -2248,8 +2134,8 @@ - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- return $ac_retval -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -+ as_fn_set_status $ac_retval - - } # ac_fn_cxx_try_link - -@@ -2261,10 +2147,10 @@ - ac_fn_c_check_header_mongrel () - { - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+ if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 - $as_echo_n "checking for $2... " >&6; } --if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 - fi - eval ac_res=\$$3 -@@ -2300,7 +2186,7 @@ - else - ac_header_preproc=no - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 - $as_echo "$ac_header_preproc" >&6; } - -@@ -2323,17 +2209,15 @@ - $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 - $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} --( cat <<\_ASBOX --## ----------------------------- ## -+( $as_echo "## ----------------------------- ## - ## Report this to david@fubar.dk ## --## ----------------------------- ## --_ASBOX -+## ----------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 - $as_echo_n "checking for $2... " >&6; } --if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 - else - eval "$3=\$ac_header_compiler" -@@ -2342,7 +2226,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } - fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - - } # ac_fn_c_check_header_mongrel - -@@ -2355,7 +2239,7 @@ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 - $as_echo_n "checking for $2... " >&6; } --if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 - else - eval "$3=no" -@@ -2396,7 +2280,7 @@ - eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - - } # ac_fn_c_check_type - cat >config.log <<_ACEOF -@@ -2404,7 +2288,7 @@ - running configure, to aid debugging if configure makes a mistake. - - It was created by hal $as_me 0.5.14, which was --generated by GNU Autoconf 2.64. Invocation command line was -+generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -@@ -2514,11 +2398,9 @@ - { - echo - -- cat <<\_ASBOX --## ---------------- ## -+ $as_echo "## ---------------- ## - ## Cache variables. ## --## ---------------- ## --_ASBOX -+## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, - ( -@@ -2552,11 +2434,9 @@ - ) - echo - -- cat <<\_ASBOX --## ----------------- ## -+ $as_echo "## ----------------- ## - ## Output variables. ## --## ----------------- ## --_ASBOX -+## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do -@@ -2569,11 +2449,9 @@ - echo - - if test -n "$ac_subst_files"; then -- cat <<\_ASBOX --## ------------------- ## -+ $as_echo "## ------------------- ## - ## File substitutions. ## --## ------------------- ## --_ASBOX -+## ------------------- ##" - echo - for ac_var in $ac_subst_files - do -@@ -2587,11 +2465,9 @@ - fi - - if test -s confdefs.h; then -- cat <<\_ASBOX --## ----------- ## -+ $as_echo "## ----------- ## - ## confdefs.h. ## --## ----------- ## --_ASBOX -+## ----------- ##" - echo - cat confdefs.h - echo -@@ -2646,7 +2522,12 @@ - ac_site_file1=NONE - ac_site_file2=NONE - if test -n "$CONFIG_SITE"; then -- ac_site_file1=$CONFIG_SITE -+ # We do not want a PATH search for config.site. -+ case $CONFIG_SITE in #(( -+ -*) ac_site_file1=./$CONFIG_SITE;; -+ */*) ac_site_file1=$CONFIG_SITE;; -+ *) ac_site_file1=./$CONFIG_SITE;; -+ esac - elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -@@ -2657,18 +2538,22 @@ - for ac_site_file in "$ac_site_file1" "$ac_site_file2" - do - test "x$ac_site_file" = xNONE && continue -- if test -r "$ac_site_file"; then -+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 - $as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 -- . "$ac_site_file" -+ . "$ac_site_file" \ -+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "failed to load site script $ac_site_file -+See \`config.log' for more details" "$LINENO" 5; } - fi - done - - if test -r "$cache_file"; then -- # Some versions of bash will fail to source /dev/null (special -- # files actually), so we avoid doing that. -- if test -f "$cache_file"; then -+ # Some versions of bash will fail to source /dev/null (special files -+ # actually), so we avoid doing that. DJGPP emulates it as a regular file. -+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 - $as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in -@@ -2737,7 +2622,7 @@ - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 - $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} -- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 - fi - ## -------------------- ## - ## Main body of script. ## -@@ -2754,16 +2639,22 @@ - - ac_aux_dir= - for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do -- for ac_t in install-sh install.sh shtool; do -- if test -f "$ac_dir/$ac_t"; then -- ac_aux_dir=$ac_dir -- ac_install_sh="$ac_aux_dir/$ac_t -c" -- break 2 -- fi -- done -+ if test -f "$ac_dir/install-sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install-sh -c" -+ break -+ elif test -f "$ac_dir/install.sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install.sh -c" -+ break -+ elif test -f "$ac_dir/shtool"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/shtool install -c" -+ break -+ fi - done - if test -z "$ac_aux_dir"; then -- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 - fi - - # These three variables are undocumented and unsupported, -@@ -2792,7 +2683,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 - $as_echo_n "checking for a BSD-compatible install... " >&6; } - if test -z "$INSTALL"; then --if test "${ac_cv_path_install+set}" = set; then : -+if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -@@ -2879,11 +2770,11 @@ - ' - case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) -- as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; -+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; - esac - case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) -- as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; - esac - - # Do `set' in a subshell so we don't clobber the current shell's -@@ -2905,7 +2796,7 @@ - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". -- as_fn_error "ls -t appears to fail. Make sure there is not a broken -+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - -@@ -2915,7 +2806,7 @@ - # Ok. - : - else -- as_fn_error "newly created file is older than distributed files! -+ as_fn_error $? "newly created file is older than distributed files! - Check your system clock" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -@@ -2969,7 +2860,7 @@ - set dummy ${ac_tool_prefix}strip; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_STRIP+set}" = set; then : -+if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$STRIP"; then -@@ -3009,7 +2900,7 @@ - set dummy strip; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : -+if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_STRIP"; then -@@ -3062,7 +2953,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 - $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } - if test -z "$MKDIR_P"; then -- if test "${ac_cv_path_mkdir+set}" = set; then : -+ if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -@@ -3087,6 +2978,7 @@ - - fi - -+ test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else -@@ -3094,7 +2986,6 @@ - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. -- test -d ./--version && rmdir ./--version - MKDIR_P="$ac_install_sh -d" - fi - fi -@@ -3113,7 +3004,7 @@ - set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_AWK+set}" = set; then : -+if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$AWK"; then -@@ -3153,7 +3044,7 @@ - $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } - set x ${MAKE-make} - ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` --if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat >conftest.make <<\_ACEOF -@@ -3161,7 +3052,7 @@ - all: - @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF --# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. - case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; -@@ -3195,7 +3086,7 @@ - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then -- as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 -+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi - fi - -@@ -3376,7 +3267,7 @@ - set dummy ${ac_tool_prefix}gcc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -3416,7 +3307,7 @@ - set dummy gcc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then -@@ -3469,7 +3360,7 @@ - set dummy ${ac_tool_prefix}cc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -3509,7 +3400,7 @@ - set dummy cc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -3568,7 +3459,7 @@ - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -3612,7 +3503,7 @@ - set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then -@@ -3666,8 +3557,8 @@ - - test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "no acceptable C compiler found in \$PATH --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "no acceptable C compiler found in \$PATH -+See \`config.log' for more details" "$LINENO" 5; } - - # Provide some information about the compiler. - $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -@@ -3688,32 +3579,30 @@ - ... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 -- rm -f conftest.er1 conftest.err - fi -+ rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - done - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include <stdio.h> -+ - int - main () - { --FILE *f = fopen ("conftest.out", "w"); -- return ferror (f) || fclose (f) != 0; - - ; - return 0; - } - _ACEOF - ac_clean_files_save=$ac_clean_files --ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out" -+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" - # Try to create an executable without -o first, disregard a.out. - # It will help us diagnose broken compilers, and finding out an intuition - # of exeext. --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 --$as_echo_n "checking for C compiler default output file name... " >&6; } -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -+$as_echo_n "checking whether the C compiler works... " >&6; } - ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - - # The possible output files: -@@ -3775,62 +3664,28 @@ - else - ac_file='' - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 --$as_echo "$ac_file" >&6; } - if test -z "$ac_file"; then : -- $as_echo "$as_me: failed program was:" >&5 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+$as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --{ as_fn_set_status 77 --as_fn_error "C compiler cannot create executables --See \`config.log' for more details." "$LINENO" 5; }; } -+as_fn_error 77 "C compiler cannot create executables -+See \`config.log' for more details" "$LINENO" 5; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -+$as_echo_n "checking for C compiler default output file name... " >&6; } -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -+$as_echo "$ac_file" >&6; } - ac_exeext=$ac_cv_exeext - --# Check that the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 --$as_echo_n "checking whether the C compiler works... " >&6; } --# If not cross compiling, check that we can run a simple program. --if test "$cross_compiling" != yes; then -- if { ac_try='./$ac_file' -- { { case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_try") 2>&5 -- ac_status=$? -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; }; }; then -- cross_compiling=no -- else -- if test "$cross_compiling" = maybe; then -- cross_compiling=yes -- else -- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 --$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot run C compiled programs. --If you meant to cross compile, use \`--host'. --See \`config.log' for more details." "$LINENO" 5; } -- fi -- fi --fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 --$as_echo "yes" >&6; } -- --rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out -+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out - ac_clean_files=$ac_clean_files_save --# Check that the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 --$as_echo_n "checking whether we are cross compiling... " >&6; } --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 --$as_echo "$cross_compiling" >&6; } -- - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 - $as_echo_n "checking for suffix of executables... " >&6; } - if { { ac_try="$ac_link" -@@ -3860,19 +3715,78 @@ - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot compute suffix of executables: cannot compile and link --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "cannot compute suffix of executables: cannot compile and link -+See \`config.log' for more details" "$LINENO" 5; } - fi --rm -f conftest$ac_cv_exeext -+rm -f conftest conftest$ac_cv_exeext - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 - $as_echo "$ac_cv_exeext" >&6; } - - rm -f conftest.$ac_ext - EXEEXT=$ac_cv_exeext - ac_exeext=$EXEEXT -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include <stdio.h> -+int -+main () -+{ -+FILE *f = fopen ("conftest.out", "w"); -+ return ferror (f) || fclose (f) != 0; -+ -+ ; -+ return 0; -+} -+_ACEOF -+ac_clean_files="$ac_clean_files conftest.out" -+# Check that the compiler produces executables we can run. If not, either -+# the compiler is broken, or we cross compile. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -+$as_echo_n "checking whether we are cross compiling... " >&6; } -+if test "$cross_compiling" != yes; then -+ { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ if { ac_try='./conftest$ac_cv_exeext' -+ { { case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; }; then -+ cross_compiling=no -+ else -+ if test "$cross_compiling" = maybe; then -+ cross_compiling=yes -+ else -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "cannot run C compiled programs. -+If you meant to cross compile, use \`--host'. -+See \`config.log' for more details" "$LINENO" 5; } -+ fi -+ fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -+$as_echo "$cross_compiling" >&6; } -+ -+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -+ac_clean_files=$ac_clean_files_save - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 - $as_echo_n "checking for suffix of object files... " >&6; } --if test "${ac_cv_objext+set}" = set; then : -+if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -3912,8 +3826,8 @@ - - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot compute suffix of object files: cannot compile --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "cannot compute suffix of object files: cannot compile -+See \`config.log' for more details" "$LINENO" 5; } - fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi -@@ -3923,7 +3837,7 @@ - ac_objext=$OBJEXT - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 - $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } --if test "${ac_cv_c_compiler_gnu+set}" = set; then : -+if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -3960,7 +3874,7 @@ - ac_save_CFLAGS=$CFLAGS - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 - $as_echo_n "checking whether $CC accepts -g... " >&6; } --if test "${ac_cv_prog_cc_g+set}" = set; then : -+if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_save_c_werror_flag=$ac_c_werror_flag -@@ -4038,7 +3952,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 - $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } --if test "${ac_cv_prog_cc_c89+set}" = set; then : -+if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_cv_prog_cc_c89=no -@@ -4137,7 +4051,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 - $as_echo_n "checking dependency style of $depcc... " >&6; } --if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : -+if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -@@ -4263,7 +4177,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 - $as_echo_n "checking for library containing strerror... " >&6; } --if test "${ac_cv_search_strerror+set}" = set; then : -+if ${ac_cv_search_strerror+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_func_search_save_LIBS=$LIBS -@@ -4297,11 +4211,11 @@ - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext -- if test "${ac_cv_search_strerror+set}" = set; then : -+ if ${ac_cv_search_strerror+:} false; then : - break - fi - done --if test "${ac_cv_search_strerror+set}" = set; then : -+if ${ac_cv_search_strerror+:} false; then : - - else - ac_cv_search_strerror=no -@@ -4327,7 +4241,7 @@ - set dummy ${ac_tool_prefix}gcc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -4367,7 +4281,7 @@ - set dummy gcc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then -@@ -4420,7 +4334,7 @@ - set dummy ${ac_tool_prefix}cc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -4460,7 +4374,7 @@ - set dummy cc; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -4519,7 +4433,7 @@ - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -+if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then -@@ -4563,7 +4477,7 @@ - set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then -@@ -4617,8 +4531,8 @@ - - test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "no acceptable C compiler found in \$PATH --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "no acceptable C compiler found in \$PATH -+See \`config.log' for more details" "$LINENO" 5; } - - # Provide some information about the compiler. - $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -@@ -4639,15 +4553,15 @@ - ... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 -- rm -f conftest.er1 conftest.err - fi -+ rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - done - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 - $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } --if test "${ac_cv_c_compiler_gnu+set}" = set; then : -+if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -4684,7 +4598,7 @@ - ac_save_CFLAGS=$CFLAGS - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 - $as_echo_n "checking whether $CC accepts -g... " >&6; } --if test "${ac_cv_prog_cc_g+set}" = set; then : -+if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_save_c_werror_flag=$ac_c_werror_flag -@@ -4762,7 +4676,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 - $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } --if test "${ac_cv_prog_cc_c89+set}" = set; then : -+if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_cv_prog_cc_c89=no -@@ -4861,7 +4775,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 - $as_echo_n "checking dependency style of $depcc... " >&6; } --if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : -+if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -@@ -5000,7 +4914,7 @@ - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CXX+set}" = set; then : -+if ${ac_cv_prog_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$CXX"; then -@@ -5044,7 +4958,7 @@ - set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : -+if ${ac_cv_prog_ac_ct_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CXX"; then -@@ -5114,15 +5028,15 @@ - ... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 -- rm -f conftest.er1 conftest.err - fi -+ rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - done - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 - $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } --if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : -+if ${ac_cv_cxx_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -5159,7 +5073,7 @@ - ac_save_CXXFLAGS=$CXXFLAGS - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 - $as_echo_n "checking whether $CXX accepts -g... " >&6; } --if test "${ac_cv_prog_cxx_g+set}" = set; then : -+if ${ac_cv_prog_cxx_g+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag -@@ -5245,7 +5159,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 - $as_echo_n "checking dependency style of $depcc... " >&6; } --if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : -+if ${am_cv_CXX_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -@@ -5377,7 +5291,7 @@ - fi - set dummy $CC; ac_cc=`$as_echo "$2" | - sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` --if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -5506,7 +5420,7 @@ - CPP= - fi - if test -z "$CPP"; then -- if test "${ac_cv_prog_CPP+set}" = set; then : -+ if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 - else - # Double quotes because CPP needs to be expanded -@@ -5536,7 +5450,7 @@ - # Broken: fails on valid input. - continue - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. -@@ -5552,11 +5466,11 @@ - ac_preproc_ok=: - break - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - done - # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.i conftest.err conftest.$ac_ext - if $ac_preproc_ok; then : - break - fi -@@ -5595,7 +5509,7 @@ - # Broken: fails on valid input. - continue - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. -@@ -5611,18 +5525,18 @@ - ac_preproc_ok=: - break - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - done - # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.i conftest.err conftest.$ac_ext - if $ac_preproc_ok; then : - - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "C preprocessor \"$CPP\" fails sanity check --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -+See \`config.log' for more details" "$LINENO" 5; } - fi - - ac_ext=c -@@ -5634,7 +5548,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 - $as_echo_n "checking for grep that handles long lines and -e... " >&6; } --if test "${ac_cv_path_GREP+set}" = set; then : -+if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$GREP"; then -@@ -5683,7 +5597,7 @@ - done - IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then -- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 -+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi - else - ac_cv_path_GREP=$GREP -@@ -5697,7 +5611,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 - $as_echo_n "checking for egrep... " >&6; } --if test "${ac_cv_path_EGREP+set}" = set; then : -+if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 -@@ -5749,7 +5663,7 @@ - done - IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then -- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 -+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi - else - ac_cv_path_EGREP=$EGREP -@@ -5764,7 +5678,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 - $as_echo_n "checking for ANSI C header files... " >&6; } --if test "${ac_cv_header_stdc+set}" = set; then : -+if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -@@ -5882,8 +5796,8 @@ - - - --macro_version='2.2.6' --macro_revision='1.3012' -+macro_version='2.4.2' -+macro_revision='1.3337' - - - -@@ -5901,27 +5815,27 @@ - - # Make sure we can run config.sub. - $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -- as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 - $as_echo_n "checking build system type... " >&6; } --if test "${ac_cv_build+set}" = set; then : -+if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_build_alias=$build_alias - test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` - test "x$ac_build_alias" = x && -- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 -+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 - ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 -+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 - $as_echo "$ac_cv_build" >&6; } - case $ac_cv_build in - *-*-*) ;; --*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; -+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; - esac - build=$ac_cv_build - ac_save_IFS=$IFS; IFS='-' -@@ -5939,14 +5853,14 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 - $as_echo_n "checking host system type... " >&6; } --if test "${ac_cv_host+set}" = set; then : -+if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build - else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 - fi - - fi -@@ -5954,7 +5868,7 @@ - $as_echo "$ac_cv_host" >&6; } - case $ac_cv_host in - *-*-*) ;; --*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; -+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; - esac - host=$ac_cv_host - ac_save_IFS=$IFS; IFS='-' -@@ -5970,9 +5884,78 @@ - case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -+# Backslashify metacharacters that are still active within -+# double-quoted strings. -+sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -+ -+# Same as above, but do not quote variable references. -+double_quote_subst='s/\(["`\\]\)/\\\1/g' -+ -+# Sed substitution to delay expansion of an escaped shell variable in a -+# double_quote_subst'ed string. -+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -+ -+# Sed substitution to delay expansion of an escaped single quote. -+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -+ -+# Sed substitution to avoid accidental globbing in evaled expressions -+no_glob_subst='s/\*/\\\*/g' -+ -+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -+$as_echo_n "checking how to print strings... " >&6; } -+# Test print first, because it will be a builtin if present. -+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ -+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then -+ ECHO='print -r --' -+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then -+ ECHO='printf %s\n' -+else -+ # Use this function as a fallback that always works. -+ func_fallback_echo () -+ { -+ eval 'cat <<_LTECHO_EOF -+$1 -+_LTECHO_EOF' -+ } -+ ECHO='func_fallback_echo' -+fi -+ -+# func_echo_all arg... -+# Invoke $ECHO with all args, space-separated. -+func_echo_all () -+{ -+ $ECHO "" -+} -+ -+case "$ECHO" in -+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -+$as_echo "printf" >&6; } ;; -+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -+$as_echo "print -r" >&6; } ;; -+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -+$as_echo "cat" >&6; } ;; -+esac -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 - $as_echo_n "checking for a sed that does not truncate output... " >&6; } --if test "${ac_cv_path_SED+set}" = set; then : -+if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ -@@ -6027,7 +6010,7 @@ - done - IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then -- as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 -+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi - else - ac_cv_path_SED=$SED -@@ -6054,7 +6037,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 - $as_echo_n "checking for fgrep... " >&6; } --if test "${ac_cv_path_FGREP+set}" = set; then : -+if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 -@@ -6106,7 +6089,7 @@ - done - IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then -- as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 -+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi - else - ac_cv_path_FGREP=$FGREP -@@ -6185,7 +6168,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 - $as_echo_n "checking for non-GNU ld... " >&6; } - fi --if test "${lt_cv_path_LD+set}" = set; then : -+if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$LD"; then -@@ -6222,10 +6205,10 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 - $as_echo "no" >&6; } - fi --test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 -+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 - $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } --if test "${lt_cv_prog_gnu_ld+set}" = set; then : -+if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 - else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -@@ -6252,7 +6235,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 - $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } --if test "${lt_cv_path_NM+set}" = set; then : -+if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$NM"; then -@@ -6305,14 +6288,17 @@ - NM="$lt_cv_path_NM" - else - # Didn't find any BSD compatible name lister, look for dumpbin. -- if test -n "$ac_tool_prefix"; then -- for ac_prog in "dumpbin -symbols" "link -dump -symbols" -+ if test -n "$DUMPBIN"; then : -+ # Let the user override the test. -+ else -+ if test -n "$ac_tool_prefix"; then -+ for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_DUMPBIN+set}" = set; then : -+if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$DUMPBIN"; then -@@ -6350,13 +6336,13 @@ - fi - if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN -- for ac_prog in "dumpbin -symbols" "link -dump -symbols" -+ for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : -+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_DUMPBIN"; then -@@ -6405,6 +6391,15 @@ - fi - fi - -+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in -+ *COFF*) -+ DUMPBIN="$DUMPBIN -symbols" -+ ;; -+ *) -+ DUMPBIN=: -+ ;; -+ esac -+ fi - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" -@@ -6419,18 +6414,18 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 - $as_echo_n "checking the name lister ($NM) interface... " >&6; } --if test "${lt_cv_nm_interface+set}" = set; then : -+if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext -- (eval echo "\"\$as_me:6427: $ac_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 -- (eval echo "\"\$as_me:6430: $NM \\\"conftest.$ac_objext\\\"\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 -- (eval echo "\"\$as_me:6433: output\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" -@@ -6454,7 +6449,7 @@ - # find the maximum length of command line arguments - { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 - $as_echo_n "checking the maximum length of command line arguments... " >&6; } --if test "${lt_cv_sys_max_cmd_len+set}" = set; then : -+if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 - else - i=0 -@@ -6487,6 +6482,11 @@ - lt_cv_sys_max_cmd_len=8192; - ;; - -+ mint*) -+ # On MiNT this can take a long time and run out of memory. -+ lt_cv_sys_max_cmd_len=8192; -+ ;; -+ - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. -@@ -6512,6 +6512,11 @@ - lt_cv_sys_max_cmd_len=196608 - ;; - -+ os2*) -+ # The test takes a long time on OS/2. -+ lt_cv_sys_max_cmd_len=8192 -+ ;; -+ - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not -@@ -6551,8 +6556,8 @@ - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. -- while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ -- = "XX$teststring$teststring"; } >/dev/null 2>&1 && -+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ -+ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` -@@ -6594,8 +6599,8 @@ - # Try some XSI features - xsi_shell=no - ( _lt_dummy="a/b/c" -- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ -- = c,a/b,, \ -+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ -+ = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -@@ -6644,22 +6649,101 @@ - - - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 --$as_echo_n "checking for $LD option to reload object files... " >&6; } --if test "${lt_cv_ld_reload_flag+set}" = set; then : -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -+$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -+if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 - else -- lt_cv_ld_reload_flag='-r' -+ case $host in -+ *-*-mingw* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 -+ ;; -+ *-*-cygwin* ) -+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 -+ ;; -+ * ) # otherwise, assume *nix -+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 -+ ;; -+ esac -+ ;; -+ *-*-cygwin* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin -+ ;; -+ *-*-cygwin* ) -+ lt_cv_to_host_file_cmd=func_convert_file_noop -+ ;; -+ * ) # otherwise, assume *nix -+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin -+ ;; -+ esac -+ ;; -+ * ) # unhandled hosts (and "normal" native builds) -+ lt_cv_to_host_file_cmd=func_convert_file_noop -+ ;; -+esac -+ - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 --$as_echo "$lt_cv_ld_reload_flag" >&6; } --reload_flag=$lt_cv_ld_reload_flag -+ -+to_host_file_cmd=$lt_cv_to_host_file_cmd -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -+$as_echo "$lt_cv_to_host_file_cmd" >&6; } -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -+if ${lt_cv_to_tool_file_cmd+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ #assume ordinary cross tools, or native build. -+lt_cv_to_tool_file_cmd=func_convert_file_noop -+case $host in -+ *-*-mingw* ) -+ case $build in -+ *-*-mingw* ) # actually msys -+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 -+ ;; -+ esac -+ ;; -+esac -+ -+fi -+ -+to_tool_file_cmd=$lt_cv_to_tool_file_cmd -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -+$as_echo "$lt_cv_to_tool_file_cmd" >&6; } -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -+$as_echo_n "checking for $LD option to reload object files... " >&6; } -+if ${lt_cv_ld_reload_flag+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_ld_reload_flag='-r' -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -+$as_echo "$lt_cv_ld_reload_flag" >&6; } -+reload_flag=$lt_cv_ld_reload_flag - case $reload_flag in - "" | " "*) ;; - *) reload_flag=" $reload_flag" ;; - esac - reload_cmds='$LD$reload_flag -o $output$reload_objs' - case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ if test "$GCC" != yes; then -+ reload_cmds=false -+ fi -+ ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' -@@ -6682,7 +6766,7 @@ - set dummy ${ac_tool_prefix}objdump; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_OBJDUMP+set}" = set; then : -+if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$OBJDUMP"; then -@@ -6722,7 +6806,7 @@ - set dummy objdump; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : -+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_OBJDUMP"; then -@@ -6781,7 +6865,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 - $as_echo_n "checking how to recognize dependent libraries... " >&6; } --if test "${lt_cv_deplibs_check_method+set}" = set; then : -+if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_file_magic_cmd='$MAGIC_CMD' -@@ -6823,16 +6907,18 @@ - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. -- if ( file / ) >/dev/null 2>&1; then -+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. -+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else -- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -+ # Keep this pattern in sync with the one in func_win32_libid. -+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - --cegcc) -+cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' -@@ -6862,6 +6948,10 @@ - lt_cv_deplibs_check_method=pass_all - ;; - -+haiku*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ - hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in -@@ -6870,11 +6960,11 @@ - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) -- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' -+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) -- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' -+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac -@@ -6895,12 +6985,12 @@ - lt_cv_deplibs_check_method=pass_all - ;; - --# This must be Linux ELF. --linux* | k*bsd*-gnu) -+# This must be glibc/ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - --netbsd* | netbsdelf*-gnu) -+netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else -@@ -6977,6 +7067,21 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 - $as_echo "$lt_cv_deplibs_check_method" >&6; } -+ -+file_magic_glob= -+want_nocaseglob=no -+if test "$build" = "$host"; then -+ case $host_os in -+ mingw* | pw32*) -+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then -+ want_nocaseglob=yes -+ else -+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` -+ fi -+ ;; -+ esac -+fi -+ - file_magic_cmd=$lt_cv_file_magic_cmd - deplibs_check_method=$lt_cv_deplibs_check_method - test -z "$deplibs_check_method" && deplibs_check_method=unknown -@@ -6992,12 +7097,165 @@ - - - -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -+set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if ${ac_cv_prog_DLLTOOL+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$DLLTOOL"; then -+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+DLLTOOL=$ac_cv_prog_DLLTOOL -+if test -n "$DLLTOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -+$as_echo "$DLLTOOL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_DLLTOOL"; then -+ ac_ct_DLLTOOL=$DLLTOOL -+ # Extract the first word of "dlltool", so it can be a program name with args. -+set dummy dlltool; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_DLLTOOL"; then -+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_DLLTOOL="dlltool" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -+if test -n "$ac_ct_DLLTOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -+$as_echo "$ac_ct_DLLTOOL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ if test "x$ac_ct_DLLTOOL" = x; then -+ DLLTOOL="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ DLLTOOL=$ac_ct_DLLTOOL -+ fi -+else -+ DLLTOOL="$ac_cv_prog_DLLTOOL" -+fi -+ -+test -z "$DLLTOOL" && DLLTOOL=dlltool -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -+$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_sharedlib_from_linklib_cmd='unknown' -+ -+case $host_os in -+cygwin* | mingw* | pw32* | cegcc*) -+ # two different shell functions defined in ltmain.sh -+ # decide which to use based on capabilities of $DLLTOOL -+ case `$DLLTOOL --help 2>&1` in -+ *--identify-strict*) -+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib -+ ;; -+ *) -+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback -+ ;; -+ esac -+ ;; -+*) -+ # fallback: assume linklib IS sharedlib -+ lt_cv_sharedlib_from_linklib_cmd="$ECHO" -+ ;; -+esac -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO -+ -+ -+ -+ -+ -+ -+ - if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. --set dummy ${ac_tool_prefix}ar; ac_word=$2 -+ for ac_prog in ar -+ do -+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -+set dummy $ac_tool_prefix$ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_AR+set}" = set; then : -+if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$AR"; then -@@ -7010,7 +7268,7 @@ - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -- ac_cv_prog_AR="${ac_tool_prefix}ar" -+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -@@ -7030,14 +7288,18 @@ - fi - - -+ test -n "$AR" && break -+ done - fi --if test -z "$ac_cv_prog_AR"; then -+if test -z "$AR"; then - ac_ct_AR=$AR -- # Extract the first word of "ar", so it can be a program name with args. --set dummy ar; ac_word=$2 -+ for ac_prog in ar -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : -+if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_AR"; then -@@ -7050,7 +7312,7 @@ - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -- ac_cv_prog_ac_ct_AR="ar" -+ ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -@@ -7069,6 +7331,10 @@ - $as_echo "no" >&6; } - fi - -+ -+ test -n "$ac_ct_AR" && break -+done -+ - if test "x$ac_ct_AR" = x; then - AR="false" - else -@@ -7080,16 +7346,72 @@ - esac - AR=$ac_ct_AR - fi --else -- AR="$ac_cv_prog_AR" - fi - --test -z "$AR" && AR=ar --test -z "$AR_FLAGS" && AR_FLAGS=cru -+: ${AR=ar} -+: ${AR_FLAGS=cru} -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -+$as_echo_n "checking for archiver @FILE support... " >&6; } -+if ${lt_cv_ar_at_file+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_ar_at_file=no -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+int -+main () -+{ - -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ echo conftest.$ac_objext > conftest.lst -+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' -+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 -+ (eval $lt_ar_try) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ if test "$ac_status" -eq 0; then -+ # Ensure the archiver fails upon bogus file names. -+ rm -f conftest.$ac_objext libconftest.a -+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 -+ (eval $lt_ar_try) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ if test "$ac_status" -ne 0; then -+ lt_cv_ar_at_file=@ -+ fi -+ fi -+ rm -f conftest.* libconftest.a - -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -+$as_echo "$lt_cv_ar_at_file" >&6; } - -+if test "x$lt_cv_ar_at_file" = xno; then -+ archiver_list_spec= -+else -+ archiver_list_spec=$lt_cv_ar_at_file -+fi - - - -@@ -7102,7 +7424,7 @@ - set dummy ${ac_tool_prefix}strip; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_STRIP+set}" = set; then : -+if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$STRIP"; then -@@ -7142,7 +7464,7 @@ - set dummy strip; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : -+if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_STRIP"; then -@@ -7201,7 +7523,7 @@ - set dummy ${ac_tool_prefix}ranlib; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_RANLIB+set}" = set; then : -+if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$RANLIB"; then -@@ -7241,7 +7563,7 @@ - set dummy ranlib; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : -+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_RANLIB"; then -@@ -7303,15 +7625,27 @@ - if test -n "$RANLIB"; then - case $host_os in - openbsd*) -- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) -- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac -- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" - fi - -+case $host_os in -+ darwin*) -+ lock_old_archive_extraction=yes ;; -+ *) -+ lock_old_archive_extraction=no ;; -+esac -+ -+ -+ -+ -+ -+ - - - -@@ -7358,7 +7692,7 @@ - # Check for command to grab the raw symbol name followed by C symbol from nm. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 - $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } --if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : -+if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 - else - -@@ -7419,8 +7753,8 @@ - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - - # Transform an extracted symbol line into symbol name and symbol address --lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" --lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - - # Handle CRLF in mingw tool chain - opt_cr= -@@ -7444,6 +7778,7 @@ - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ - " {last_section=section; section=\$ 3};"\ -+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ - " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ - " \$ 0!~/External *\|/{next};"\ - " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -@@ -7456,6 +7791,7 @@ - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi -+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no -@@ -7481,8 +7817,8 @@ - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm -- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 -- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 -+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then -@@ -7497,6 +7833,18 @@ - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -+/* DATA imports from DLLs on WIN32 con't be const, because runtime -+ relocations are performed -- see ld's documentation on pseudo-relocs. */ -+# define LT_DLSYM_CONST -+#elif defined(__osf__) -+/* This system does not cope well with relocations in const data. */ -+# define LT_DLSYM_CONST -+#else -+# define LT_DLSYM_CONST const -+#endif -+ - #ifdef __cplusplus - extern "C" { - #endif -@@ -7508,7 +7856,7 @@ - cat <<_LT_EOF >> conftest.$ac_ext - - /* The mapping between symbol names and symbols. */ --const struct { -+LT_DLSYM_CONST struct { - const char *name; - void *address; - } -@@ -7534,8 +7882,8 @@ - _LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext -- lt_save_LIBS="$LIBS" -- lt_save_CFLAGS="$CFLAGS" -+ lt_globsym_save_LIBS=$LIBS -+ lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 -@@ -7545,8 +7893,8 @@ - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi -- LIBS="$lt_save_LIBS" -- CFLAGS="$lt_save_CFLAGS" -+ LIBS=$lt_globsym_save_LIBS -+ CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi -@@ -7583,6 +7931,20 @@ - $as_echo "ok" >&6; } - fi - -+# Response file support. -+if test "$lt_cv_nm_interface" = "MS dumpbin"; then -+ nm_file_list_spec='@' -+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then -+ nm_file_list_spec='@' -+fi -+ -+ -+ -+ -+ -+ -+ -+ - - - -@@ -7602,6 +7964,41 @@ - - - -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -+$as_echo_n "checking for sysroot... " >&6; } -+ -+# Check whether --with-sysroot was given. -+if test "${with_sysroot+set}" = set; then : -+ withval=$with_sysroot; -+else -+ with_sysroot=no -+fi -+ -+ -+lt_sysroot= -+case ${with_sysroot} in #( -+ yes) -+ if test "$GCC" = yes; then -+ lt_sysroot=`$CC --print-sysroot 2>/dev/null` -+ fi -+ ;; #( -+ /*) -+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` -+ ;; #( -+ no|'') -+ ;; #( -+ *) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -+$as_echo "${with_sysroot}" >&6; } -+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 -+ ;; -+esac -+ -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -+$as_echo "${lt_sysroot:-no}" >&6; } -+ -+ -+ - - - # Check whether --enable-libtool-lock was given. -@@ -7635,7 +8032,7 @@ - ;; - *-*-irix6*) - # Find out which ABI we are using. -- echo '#line 7638 "configure"' > conftest.$ac_ext -+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? -@@ -7729,7 +8126,7 @@ - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 - $as_echo_n "checking whether the C compiler needs -belf... " >&6; } --if test "${lt_cv_cc_needs_belf+set}" = set; then : -+if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_ext=c -@@ -7770,7 +8167,7 @@ - CFLAGS="$SAVE_CFLAGS" - fi - ;; --sparc*-*solaris*) -+*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -@@ -7781,7 +8178,20 @@ - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in -- yes*) LD="${LD-ld} -m elf64_sparc" ;; -+ yes*) -+ case $host in -+ i?86-*-solaris*) -+ LD="${LD-ld} -m elf_x86_64" -+ ;; -+ sparc*-*-solaris*) -+ LD="${LD-ld} -m elf64_sparc" -+ ;; -+ esac -+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available. -+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then -+ LD="${LD-ld}_sol2" -+ fi -+ ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" -@@ -7797,19 +8207,16 @@ - - need_locks="$enable_libtool_lock" - -- -- case $host_os in -- rhapsody* | darwin*) -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. --set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -+set dummy ${ac_tool_prefix}mt; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : -+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 - else -- if test -n "$DSYMUTIL"; then -- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -+ if test -n "$MANIFEST_TOOL"; then -+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH -@@ -7818,7 +8225,7 @@ - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" -+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -@@ -7828,10 +8235,10 @@ - - fi - fi --DSYMUTIL=$ac_cv_prog_DSYMUTIL --if test -n "$DSYMUTIL"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 --$as_echo "$DSYMUTIL" >&6; } -+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -+if test -n "$MANIFEST_TOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -+$as_echo "$MANIFEST_TOOL" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 - $as_echo "no" >&6; } -@@ -7839,13 +8246,133 @@ - - - fi --if test -z "$ac_cv_prog_DSYMUTIL"; then -- ac_ct_DSYMUTIL=$DSYMUTIL -- # Extract the first word of "dsymutil", so it can be a program name with args. --set dummy dsymutil; ac_word=$2 -+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then -+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL -+ # Extract the first word of "mt", so it can be a program name with args. -+set dummy mt; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : -+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_MANIFEST_TOOL"; then -+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -+if test -n "$ac_ct_MANIFEST_TOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ if test "x$ac_ct_MANIFEST_TOOL" = x; then -+ MANIFEST_TOOL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL -+ fi -+else -+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -+fi -+ -+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -+if ${lt_cv_path_mainfest_tool+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_path_mainfest_tool=no -+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 -+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out -+ cat conftest.err >&5 -+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then -+ lt_cv_path_mainfest_tool=yes -+ fi -+ rm -f conftest* -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -+$as_echo "$lt_cv_path_mainfest_tool" >&6; } -+if test "x$lt_cv_path_mainfest_tool" != xyes; then -+ MANIFEST_TOOL=: -+fi -+ -+ -+ -+ -+ -+ -+ case $host_os in -+ rhapsody* | darwin*) -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if ${ac_cv_prog_DSYMUTIL+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$DSYMUTIL"; then -+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+DSYMUTIL=$ac_cv_prog_DSYMUTIL -+if test -n "$DSYMUTIL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -+$as_echo "$DSYMUTIL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_DSYMUTIL"; then -+ ac_ct_DSYMUTIL=$DSYMUTIL -+ # Extract the first word of "dsymutil", so it can be a program name with args. -+set dummy dsymutil; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_DSYMUTIL"; then -@@ -7897,7 +8424,7 @@ - set dummy ${ac_tool_prefix}nmedit; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_NMEDIT+set}" = set; then : -+if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$NMEDIT"; then -@@ -7937,7 +8464,7 @@ - set dummy nmedit; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : -+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_NMEDIT"; then -@@ -7989,7 +8516,7 @@ - set dummy ${ac_tool_prefix}lipo; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_LIPO+set}" = set; then : -+if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$LIPO"; then -@@ -8029,7 +8556,7 @@ - set dummy lipo; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : -+if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_LIPO"; then -@@ -8081,7 +8608,7 @@ - set dummy ${ac_tool_prefix}otool; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_OTOOL+set}" = set; then : -+if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$OTOOL"; then -@@ -8121,7 +8648,7 @@ - set dummy otool; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : -+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_OTOOL"; then -@@ -8173,7 +8700,7 @@ - set dummy ${ac_tool_prefix}otool64; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_OTOOL64+set}" = set; then : -+if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$OTOOL64"; then -@@ -8213,7 +8740,7 @@ - set dummy otool64; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : -+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_OTOOL64"; then -@@ -8288,7 +8815,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 - $as_echo_n "checking for -single_module linker flag... " >&6; } --if test "${lt_cv_apple_cc_single_mod+set}" = set; then : -+if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_apple_cc_single_mod=no -@@ -8304,7 +8831,13 @@ - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? -- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then -+ # If there is a non-empty error log, and "single_module" -+ # appears in it, assume the flag caused a linker warning -+ if test -s conftest.err && $GREP single_module conftest.err; then -+ cat conftest.err >&5 -+ # Otherwise, if the output was created with a 0 exit code from -+ # the compiler, it worked. -+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 -@@ -8315,9 +8848,10 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 - $as_echo "$lt_cv_apple_cc_single_mod" >&6; } -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 - $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } --if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : -+if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_ld_exported_symbols_list=no -@@ -8332,611 +8866,131 @@ - { - - ; -- return 0; --} --_ACEOF --if ac_fn_c_try_link "$LINENO"; then : -- lt_cv_ld_exported_symbols_list=yes --else -- lt_cv_ld_exported_symbols_list=no --fi --rm -f core conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -- LDFLAGS="$save_LDFLAGS" -- --fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 --$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } -- case $host_os in -- rhapsody* | darwin1.[012]) -- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -- darwin1.*) -- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -- darwin*) # darwin 5.x on -- # if running on 10.5 or later, the deployment target defaults -- # to the OS version, if on x86, and 10.4, the deployment -- # target defaults to 10.4. Don't you love it? -- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in -- 10.0,*86*-darwin8*|10.0,*-darwin[91]*) -- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -- 10.[012]*) -- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -- 10.*) -- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -- esac -- ;; -- esac -- if test "$lt_cv_apple_cc_single_mod" = "yes"; then -- _lt_dar_single_mod='$single_module' -- fi -- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then -- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' -- else -- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- if test "$DSYMUTIL" != ":"; then -- _lt_dsymutil='~$DSYMUTIL $lib || :' -- else -- _lt_dsymutil= -- fi -- ;; -- esac -- --# On IRIX 5.3, sys/types and inttypes.h are conflicting. --for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ -- inttypes.h stdint.h unistd.h --do : -- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` --ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default --" --eval as_val=\$$as_ac_Header -- if test "x$as_val" = x""yes; then : -- cat >>confdefs.h <<_ACEOF --#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 --_ACEOF -- --fi -- --done -- -- --for ac_header in dlfcn.h --do : -- ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default --" --if test "x$ac_cv_header_dlfcn_h" = x""yes; then : -- cat >>confdefs.h <<_ACEOF --#define HAVE_DLFCN_H 1 --_ACEOF -- --fi -- --done -- -- -- --ac_ext=cpp --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu --if test -z "$CXX"; then -- if test -n "$CCC"; then -- CXX=$CCC -- else -- if test -n "$ac_tool_prefix"; then -- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -- do -- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. --set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CXX+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- if test -n "$CXX"; then -- ac_cv_prog_CXX="$CXX" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done -- done --IFS=$as_save_IFS -- --fi --fi --CXX=$ac_cv_prog_CXX --if test -n "$CXX"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 --$as_echo "$CXX" >&6; } --else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } --fi -- -- -- test -n "$CXX" && break -- done --fi --if test -z "$CXX"; then -- ac_ct_CXX=$CXX -- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC --do -- # Extract the first word of "$ac_prog", so it can be a program name with args. --set dummy $ac_prog; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- if test -n "$ac_ct_CXX"; then -- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -- ac_cv_prog_ac_ct_CXX="$ac_prog" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done -- done --IFS=$as_save_IFS -- --fi --fi --ac_ct_CXX=$ac_cv_prog_ac_ct_CXX --if test -n "$ac_ct_CXX"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 --$as_echo "$ac_ct_CXX" >&6; } --else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } --fi -- -- -- test -n "$ac_ct_CXX" && break --done -- -- if test "x$ac_ct_CXX" = x; then -- CXX="g++" -- else -- case $cross_compiling:$ac_tool_warned in --yes:) --{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 --$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} --ac_tool_warned=yes ;; --esac -- CXX=$ac_ct_CXX -- fi --fi -- -- fi --fi --# Provide some information about the compiler. --$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 --set X $ac_compile --ac_compiler=$2 --for ac_option in --version -v -V -qversion; do -- { { ac_try="$ac_compiler $ac_option >&5" --case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_compiler $ac_option >&5") 2>conftest.err -- ac_status=$? -- if test -s conftest.err; then -- sed '10a\ --... rest of stderr output deleted ... -- 10q' conftest.err >conftest.er1 -- cat conftest.er1 >&5 -- rm -f conftest.er1 conftest.err -- fi -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } --done -- --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 --$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } --if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ -- --int --main () --{ --#ifndef __GNUC__ -- choke me --#endif -- -- ; -- return 0; --} --_ACEOF --if ac_fn_cxx_try_compile "$LINENO"; then : -- ac_compiler_gnu=yes --else -- ac_compiler_gnu=no --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --ac_cv_cxx_compiler_gnu=$ac_compiler_gnu -- --fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 --$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } --if test $ac_compiler_gnu = yes; then -- GXX=yes --else -- GXX= --fi --ac_test_CXXFLAGS=${CXXFLAGS+set} --ac_save_CXXFLAGS=$CXXFLAGS --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 --$as_echo_n "checking whether $CXX accepts -g... " >&6; } --if test "${ac_cv_prog_cxx_g+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- ac_save_cxx_werror_flag=$ac_cxx_werror_flag -- ac_cxx_werror_flag=yes -- ac_cv_prog_cxx_g=no -- CXXFLAGS="-g" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --if ac_fn_cxx_try_compile "$LINENO"; then : -- ac_cv_prog_cxx_g=yes --else -- CXXFLAGS="" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --if ac_fn_cxx_try_compile "$LINENO"; then : -- --else -- ac_cxx_werror_flag=$ac_save_cxx_werror_flag -- CXXFLAGS="-g" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --if ac_fn_cxx_try_compile "$LINENO"; then : -- ac_cv_prog_cxx_g=yes --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -- ac_cxx_werror_flag=$ac_save_cxx_werror_flag --fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 --$as_echo "$ac_cv_prog_cxx_g" >&6; } --if test "$ac_test_CXXFLAGS" = set; then -- CXXFLAGS=$ac_save_CXXFLAGS --elif test $ac_cv_prog_cxx_g = yes; then -- if test "$GXX" = yes; then -- CXXFLAGS="-g -O2" -- else -- CXXFLAGS="-g" -- fi --else -- if test "$GXX" = yes; then -- CXXFLAGS="-O2" -- else -- CXXFLAGS= -- fi --fi --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -- --depcc="$CXX" am_compiler_list= -- --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 --$as_echo_n "checking dependency style of $depcc... " >&6; } --if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -- # We make a subdir and do the tests there. Otherwise we can end up -- # making bogus files that we don't know about and never remove. For -- # instance it was reported that on HP-UX the gcc test will end up -- # making a dummy file named `D' -- because `-MD' means `put the output -- # in D'. -- mkdir conftest.dir -- # Copy depcomp to subdir because otherwise we won't find it if we're -- # using a relative directory. -- cp "$am_depcomp" conftest.dir -- cd conftest.dir -- # We will build objects and dependencies in a subdirectory because -- # it helps to detect inapplicable dependency modes. For instance -- # both Tru64's cc and ICC support -MD to output dependencies as a -- # side effect of compilation, but ICC will put the dependencies in -- # the current directory while Tru64 will put them in the object -- # directory. -- mkdir sub -- -- am_cv_CXX_dependencies_compiler_type=none -- if test "$am_compiler_list" = ""; then -- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` -- fi -- am__universal=false -- case " $depcc " in #( -- *\ -arch\ *\ -arch\ *) am__universal=true ;; -- esac -- -- for depmode in $am_compiler_list; do -- # Setup a source with many dependencies, because some compilers -- # like to wrap large dependency lists on column 80 (with \), and -- # we should not choose a depcomp mode which is confused by this. -- # -- # We need to recreate these files for each test, as the compiler may -- # overwrite some of them when testing with obscure command lines. -- # This happens at least with the AIX C compiler. -- : > sub/conftest.c -- for i in 1 2 3 4 5 6; do -- echo '#include "conftst'$i'.h"' >> sub/conftest.c -- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with -- # Solaris 8's {/usr,}/bin/sh. -- touch sub/conftst$i.h -- done -- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -- -- # We check with `-c' and `-o' for the sake of the "dashmstdout" -- # mode. It turns out that the SunPro C++ compiler does not properly -- # handle `-M -o', and we need to detect this. Also, some Intel -- # versions had trouble with output in subdirs -- am__obj=sub/conftest.${OBJEXT-o} -- am__minus_obj="-o $am__obj" -- case $depmode in -- gcc) -- # This depmode causes a compiler race in universal mode. -- test "$am__universal" = false || continue -- ;; -- nosideeffect) -- # after this tag, mechanisms are not by side-effect, so they'll -- # only be used when explicitly requested -- if test "x$enable_dependency_tracking" = xyes; then -- continue -- else -- break -- fi -- ;; -- msvisualcpp | msvcmsys) -- # This compiler won't grok `-c -o', but also, the minuso test has -- # not run yet. These depmodes are late enough in the game, and -- # so weak that their functioning should not be impacted. -- am__obj=conftest.${OBJEXT-o} -- am__minus_obj= -- ;; -- none) break ;; -- esac -- if depmode=$depmode \ -- source=sub/conftest.c object=$am__obj \ -- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ -- >/dev/null 2>conftest.err && -- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && -- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -- grep $am__obj sub/conftest.Po > /dev/null 2>&1 && -- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then -- # icc doesn't choke on unknown options, it will just issue warnings -- # or remarks (even with -Werror). So we grep stderr for any message -- # that says an option was ignored or not supported. -- # When given -MP, icc 7.0 and 7.1 complain thusly: -- # icc: Command line warning: ignoring option '-M'; no argument required -- # The diagnosis changed in icc 8.0: -- # icc: Command line remark: option '-MP' not supported -- if (grep 'ignoring option' conftest.err || -- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else -- am_cv_CXX_dependencies_compiler_type=$depmode -- break -- fi -- fi -- done -- -- cd .. -- rm -rf conftest.dir --else -- am_cv_CXX_dependencies_compiler_type=none --fi -- --fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 --$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } --CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type -- -- if -- test "x$enable_dependency_tracking" != xno \ -- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then -- am__fastdepCXX_TRUE= -- am__fastdepCXX_FALSE='#' --else -- am__fastdepCXX_TRUE='#' -- am__fastdepCXX_FALSE= --fi -- -- --if test -n "$CXX" && ( test "X$CXX" != "Xno" && -- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -- (test "X$CXX" != "Xg++"))) ; then -- ac_ext=cpp --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 --$as_echo_n "checking how to run the C++ preprocessor... " >&6; } --if test -z "$CXXCPP"; then -- if test "${ac_cv_prog_CXXCPP+set}" = set; then : -- $as_echo_n "(cached) " >&6 --else -- # Double quotes because CXXCPP needs to be expanded -- for CXXCPP in "$CXX -E" "/lib/cpp" -- do -- ac_preproc_ok=false --for ac_cxx_preproc_warn_flag in '' yes --do -- # Use a header file that comes with gcc, so configuring glibc -- # with a fresh cross-compiler works. -- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -- # <limits.h> exists even on freestanding compilers. -- # On the NeXT, cc -E runs the code through the compiler's parser, -- # not just through cpp. "Syntax error" is here to catch this case. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --#ifdef __STDC__ --# include <limits.h> --#else --# include <assert.h> --#endif -- Syntax error --_ACEOF --if ac_fn_cxx_try_cpp "$LINENO"; then : -- --else -- # Broken: fails on valid input. --continue --fi --rm -f conftest.err conftest.$ac_ext -- -- # OK, works on sane cases. Now check whether nonexistent headers -- # can be detected and how. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --#include <ac_nonexistent.h> -+ return 0; -+} - _ACEOF --if ac_fn_cxx_try_cpp "$LINENO"; then : -- # Broken: success on invalid input. --continue -+if ac_fn_c_try_link "$LINENO"; then : -+ lt_cv_ld_exported_symbols_list=yes - else -- # Passes both tests. --ac_preproc_ok=: --break -+ lt_cv_ld_exported_symbols_list=no - fi --rm -f conftest.err conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ LDFLAGS="$save_LDFLAGS" - --done --# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then : -- break - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - -- done -- ac_cv_prog_CXXCPP=$CXXCPP -- --fi -- CXXCPP=$ac_cv_prog_CXXCPP -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -+$as_echo_n "checking for -force_load linker flag... " >&6; } -+if ${lt_cv_ld_force_load+:} false; then : -+ $as_echo_n "(cached) " >&6 - else -- ac_cv_prog_CXXCPP=$CXXCPP -+ lt_cv_ld_force_load=no -+ cat > conftest.c << _LT_EOF -+int forced_loaded() { return 2;} -+_LT_EOF -+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 -+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 -+ echo "$AR cru libconftest.a conftest.o" >&5 -+ $AR cru libconftest.a conftest.o 2>&5 -+ echo "$RANLIB libconftest.a" >&5 -+ $RANLIB libconftest.a 2>&5 -+ cat > conftest.c << _LT_EOF -+int main() { return 0;} -+_LT_EOF -+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 -+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err -+ _lt_result=$? -+ if test -s conftest.err && $GREP force_load conftest.err; then -+ cat conftest.err >&5 -+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then -+ lt_cv_ld_force_load=yes -+ else -+ cat conftest.err >&5 -+ fi -+ rm -f conftest.err libconftest.a conftest conftest.c -+ rm -rf conftest.dSYM -+ - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 --$as_echo "$CXXCPP" >&6; } --ac_preproc_ok=false --for ac_cxx_preproc_warn_flag in '' yes --do -- # Use a header file that comes with gcc, so configuring glibc -- # with a fresh cross-compiler works. -- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -- # <limits.h> exists even on freestanding compilers. -- # On the NeXT, cc -E runs the code through the compiler's parser, -- # not just through cpp. "Syntax error" is here to catch this case. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --#ifdef __STDC__ --# include <limits.h> --#else --# include <assert.h> --#endif -- Syntax error -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -+$as_echo "$lt_cv_ld_force_load" >&6; } -+ case $host_os in -+ rhapsody* | darwin1.[012]) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -+ darwin1.*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ darwin*) # darwin 5.x on -+ # if running on 10.5 or later, the deployment target defaults -+ # to the OS version, if on x86, and 10.4, the deployment -+ # target defaults to 10.4. Don't you love it? -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in -+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ 10.[012]*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ 10.*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ esac -+ ;; -+ esac -+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then -+ _lt_dar_single_mod='$single_module' -+ fi -+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then -+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' -+ else -+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' -+ fi -+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then -+ _lt_dsymutil='~$DSYMUTIL $lib || :' -+ else -+ _lt_dsymutil= -+ fi -+ ;; -+ esac -+ -+# On IRIX 5.3, sys/types and inttypes.h are conflicting. -+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ -+ inttypes.h stdint.h unistd.h -+do : -+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -+" -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 - _ACEOF --if ac_fn_cxx_try_cpp "$LINENO"; then : - --else -- # Broken: fails on valid input. --continue - fi --rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether nonexistent headers -- # can be detected and how. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --#include <ac_nonexistent.h> -+done -+ -+ -+for ac_header in dlfcn.h -+do : -+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -+" -+if test "x$ac_cv_header_dlfcn_h" = xyes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_DLFCN_H 1 - _ACEOF --if ac_fn_cxx_try_cpp "$LINENO"; then : -- # Broken: success on invalid input. --continue --else -- # Passes both tests. --ac_preproc_ok=: --break -+ - fi --rm -f conftest.err conftest.$ac_ext - - done --# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then : - --else -- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 --$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --_lt_caught_CXX_error=yes; } --fi - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu - --else -- _lt_caught_CXX_error=yes --fi -+ -+func_stripname_cnf () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; -+ esac -+} # func_stripname_cnf - - - -@@ -9017,7 +9071,22 @@ - - # Check whether --with-pic was given. - if test "${with_pic+set}" = set; then : -- withval=$with_pic; pic_mode="$withval" -+ withval=$with_pic; lt_p=${PACKAGE-default} -+ case $withval in -+ yes|no) pic_mode=$withval ;; -+ *) -+ pic_mode=default -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for lt_pkg in $withval; do -+ IFS="$lt_save_ifs" -+ if test "X$lt_pkg" = "X$lt_p"; then -+ pic_mode=yes -+ fi -+ done -+ IFS="$lt_save_ifs" -+ ;; -+ esac - else - pic_mode=default - fi -@@ -9094,6 +9163,11 @@ - - - -+ -+ -+ -+ -+ - test -z "$LN_S" && LN_S="ln -s" - - -@@ -9115,7 +9189,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 - $as_echo_n "checking for objdir... " >&6; } --if test "${lt_cv_objdir+set}" = set; then : -+if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 - else - rm -f .libs 2>/dev/null -@@ -9143,19 +9217,6 @@ - - - -- -- -- -- -- -- -- -- -- -- -- -- -- - case $host_os in - aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some -@@ -9168,23 +9229,6 @@ - ;; - esac - --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -- --# Same as above, but do not quote variable references. --double_quote_subst='s/\(["`\\]\)/\\\1/g' -- --# Sed substitution to delay expansion of an escaped shell variable in a --# double_quote_subst'ed string. --delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -- --# Sed substitution to delay expansion of an escaped single quote. --delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -- --# Sed substitution to avoid accidental globbing in evaled expressions --no_glob_subst='s/\*/\\\*/g' -- - # Global variables: - ofile=libtool - can_build_shared=yes -@@ -9213,7 +9257,7 @@ - *) break;; - esac - done --cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - - # Only perform the check for file, if the check method requires it -@@ -9223,7 +9267,7 @@ - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 - $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } --if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : -+if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $MAGIC_CMD in -@@ -9289,7 +9333,7 @@ - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 - $as_echo_n "checking for file... " >&6; } --if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : -+if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $MAGIC_CMD in -@@ -9418,11 +9462,16 @@ - lt_prog_compiler_no_builtin_flag= - - if test "$GCC" = yes; then -- lt_prog_compiler_no_builtin_flag=' -fno-builtin' -+ case $cc_basename in -+ nvcc*) -+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; -+ *) -+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; -+ esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 - $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } --if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : -+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_rtti_exceptions=no -@@ -9438,15 +9487,15 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:9441: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:9445: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes -@@ -9475,8 +9524,6 @@ - lt_prog_compiler_pic= - lt_prog_compiler_static= - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 --$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' -@@ -9524,6 +9571,12 @@ - lt_prog_compiler_pic='-fno-common' - ;; - -+ haiku*) -+ # PIC is the default for Haiku. -+ # The "-static" flag exists, but is broken. -+ lt_prog_compiler_static= -+ ;; -+ - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -@@ -9566,6 +9619,15 @@ - lt_prog_compiler_pic='-fPIC' - ;; - esac -+ -+ case $cc_basename in -+ nvcc*) # Cuda Compiler Driver 2.2 -+ lt_prog_compiler_wl='-Xlinker ' -+ if test -n "$lt_prog_compiler_pic"; then -+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" -+ fi -+ ;; -+ esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in -@@ -9607,7 +9669,7 @@ - lt_prog_compiler_static='-non_shared' - ;; - -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) -@@ -9628,7 +9690,13 @@ - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; -- pgcc* | pgf77* | pgf90* | pgf95*) -+ nagfor*) -+ # NAG Fortran compiler -+ lt_prog_compiler_wl='-Wl,-Wl,,' -+ lt_prog_compiler_pic='-PIC' -+ lt_prog_compiler_static='-Bstatic' -+ ;; -+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' -@@ -9640,25 +9708,40 @@ - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; -- xl*) -- # IBM XL C 8.0/Fortran 10.1 on PPC -+ xl* | bgxl* | bgf* | mpixl*) -+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) -+ # Sun Fortran 8.3 passes all unrecognized flags to the linker -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ lt_prog_compiler_wl='' -+ ;; -+ *Sun\ F* | *Sun*Fortran*) -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ lt_prog_compiler_wl='-Qoption ld ' -+ ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; -- *Sun\ F*) -- # Sun Fortran 8.3 passes all unrecognized flags to the linker -- lt_prog_compiler_pic='-KPIC' -+ *Intel*\ [CF]*Compiler*) -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_pic='-fPIC' -+ lt_prog_compiler_static='-static' -+ ;; -+ *Portland\ Group*) -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' -- lt_prog_compiler_wl='' - ;; - esac - ;; -@@ -9690,7 +9773,7 @@ - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in -- f77* | f90* | f95*) -+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; -@@ -9747,13 +9830,17 @@ - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; - esac --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 --$as_echo "$lt_prog_compiler_pic" >&6; } -- -- -- -- - -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -+$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -+if ${lt_cv_prog_compiler_pic+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -+$as_echo "$lt_cv_prog_compiler_pic" >&6; } -+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - - # - # Check to make sure the PIC flag actually works. -@@ -9761,7 +9848,7 @@ - if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 - $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } --if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : -+if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_pic_works=no -@@ -9777,15 +9864,15 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:9780: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:9784: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes -@@ -9814,13 +9901,18 @@ - - - -+ -+ -+ -+ -+ - # - # Check to make sure the static flag actually works. - # - wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 - $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } --if test "${lt_cv_prog_compiler_static_works+set}" = set; then : -+if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_static_works=no -@@ -9833,7 +9925,7 @@ - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 -- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes -@@ -9863,7 +9955,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 - $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } --if test "${lt_cv_prog_compiler_c_o+set}" = set; then : -+if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_c_o=no -@@ -9882,16 +9974,16 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:9885: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:9889: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes -@@ -9918,7 +10010,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 - $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } --if test "${lt_cv_prog_compiler_c_o+set}" = set; then : -+if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_c_o=no -@@ -9937,16 +10029,16 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:9940: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:9944: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes -@@ -10012,7 +10104,6 @@ - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= -- hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported -@@ -10056,13 +10147,36 @@ - openbsd*) - with_gnu_ld=no - ;; -- linux* | k*bsd*-gnu) -- link_all_deplibs=no -- ;; - esac - - ld_shlibs=yes -+ -+ # On some targets, GNU ld is compatible enough with the native linker -+ # that we're better off using the native interface for both. -+ lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then -+ case $host_os in -+ aix*) -+ # The AIX port of GNU ld has always aspired to compatibility -+ # with the native linker. However, as the warning in the GNU ld -+ # block says, versions before 2.19.5* couldn't really create working -+ # shared libraries, regardless of the interface used. -+ case `$LD -v 2>&1` in -+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;; -+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; -+ *\ \(GNU\ Binutils\)\ [3-9]*) ;; -+ *) -+ lt_use_gnu_ld_interface=yes -+ ;; -+ esac -+ ;; -+ *) -+ lt_use_gnu_ld_interface=yes -+ ;; -+ esac -+ fi -+ -+ if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - -@@ -10080,6 +10194,7 @@ - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in -+ *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -@@ -10095,11 +10210,12 @@ - ld_shlibs=no - cat <<_LT_EOF 1>&2 - --*** Warning: the GNU linker, at least up to release 2.9.1, is reported -+*** Warning: the GNU linker, at least up to release 2.19, is reported - *** to be unable to reliably create shared libraries on AIX. - *** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. -+*** really care for shared libraries, you may want to install binutils -+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -+*** You will then need to restart the configuration process. - - _LT_EOF - fi -@@ -10135,10 +10251,12 @@ - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' -+ export_dynamic_flag_spec='${wl}--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes -- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' -+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' -+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -@@ -10156,6 +10274,11 @@ - fi - ;; - -+ haiku*) -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ link_all_deplibs=yes -+ ;; -+ - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no -@@ -10171,7 +10294,7 @@ - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - -- gnu* | linux* | tpf* | k*bsd*-gnu) -+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in -@@ -10181,15 +10304,16 @@ - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then -- tmp_addflag= -+ tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler -- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; -- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers -- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ pgf77* | pgf90* | pgf95* | pgfortran*) -+ # Portland Group f77 and f90 compilers -+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; -@@ -10200,13 +10324,17 @@ - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; -- xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) -+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; -+ nvcc*) # Cuda Compiler Driver 2.2 -+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' -+ compiler_needs_object=yes -+ ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 -- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 -@@ -10222,17 +10350,16 @@ - fi - - case $cc_basename in -- xlf*) -+ xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' -- hardcode_libdir_flag_spec= -- hardcode_libdir_flag_spec_ld='-rpath $libdir' -- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ -- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' -+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac -@@ -10241,13 +10368,13 @@ - fi - ;; - -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - -@@ -10265,8 +10392,8 @@ - - _LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi -@@ -10312,8 +10439,8 @@ - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi -@@ -10353,8 +10480,10 @@ - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ # Also, AIX nm treats weak defined symbols like other global -+ # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi -@@ -10416,7 +10545,6 @@ - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi -- link_all_deplibs=no - else - # not using gcc - if test "$host_cpu" = ia64; then -@@ -10442,7 +10570,13 @@ - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if test "${lt_cv_aix_libpath+set}" = set; then -+ aix_libpath=$lt_cv_aix_libpath -+else -+ if ${lt_cv_aix_libpath_+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -10455,25 +10589,32 @@ - _ACEOF - if ac_fn_c_try_link "$LINENO"; then : - --lt_aix_libpath_sed=' -- /Import File Strings/,/^$/ { -- /^0/ { -- s/^0 *\(.*\)$/\1/ -- p -- } -- }' --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then -- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --fi -+ lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *\([^ ]*\) *$/\1/ -+ p -+ } -+ }' -+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ # Check for a 64-bit object if we didn't find anything. -+ if test -z "$lt_cv_aix_libpath_"; then -+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+ if test -z "$lt_cv_aix_libpath_"; then -+ lt_cv_aix_libpath_="/usr/lib:/lib" -+ fi -+ -+fi -+ -+ aix_libpath=$lt_cv_aix_libpath_ -+fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" -- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' -@@ -10482,7 +10623,13 @@ - else - # Determine the default libpath from the value encoded in an - # empty executable. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if test "${lt_cv_aix_libpath+set}" = set; then -+ aix_libpath=$lt_cv_aix_libpath -+else -+ if ${lt_cv_aix_libpath_+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -10495,30 +10642,42 @@ - _ACEOF - if ac_fn_c_try_link "$LINENO"; then : - --lt_aix_libpath_sed=' -- /Import File Strings/,/^$/ { -- /^0/ { -- s/^0 *\(.*\)$/\1/ -- p -- } -- }' --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then -- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --fi -+ lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *\([^ ]*\) *$/\1/ -+ p -+ } -+ }' -+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ # Check for a 64-bit object if we didn't find anything. -+ if test -z "$lt_cv_aix_libpath_"; then -+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+ if test -z "$lt_cv_aix_libpath_"; then -+ lt_cv_aix_libpath_="/usr/lib:/lib" -+ fi -+ -+fi -+ -+ aix_libpath=$lt_cv_aix_libpath_ -+fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec='$convenience' -+ if test "$with_gnu_ld" = yes; then -+ # We only use this code for GNU lds that support --whole-archive. -+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ else -+ # Exported symbols can be pulled into shared objects from archives -+ whole_archive_flag_spec='$convenience' -+ fi - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -@@ -10550,20 +10709,64 @@ - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. -- hardcode_libdir_flag_spec=' ' -- allow_undefined_flag=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- old_archive_from_new_cmds='true' -- # FIXME: Should let the user specify the lib program. -- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' -- fix_srcfile_path='`cygpath -w "$srcfile"`' -- enable_shared_with_static_runtimes=yes -+ case $cc_basename in -+ cl*) -+ # Native MSVC -+ hardcode_libdir_flag_spec=' ' -+ allow_undefined_flag=unsupported -+ always_export_symbols=yes -+ file_list_spec='@' -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' -+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; -+ else -+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; -+ fi~ -+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ -+ linknames=' -+ # The linker will not automatically build a static lib if we build a DLL. -+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true' -+ enable_shared_with_static_runtimes=yes -+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' -+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' -+ # Don't use ranlib -+ old_postinstall_cmds='chmod 644 $oldlib' -+ postlink_cmds='lt_outputfile="@OUTPUT@"~ -+ lt_tool_outputfile="@TOOL_OUTPUT@"~ -+ case $lt_outputfile in -+ *.exe|*.EXE) ;; -+ *) -+ lt_outputfile="$lt_outputfile.exe" -+ lt_tool_outputfile="$lt_tool_outputfile.exe" -+ ;; -+ esac~ -+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then -+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; -+ $RM "$lt_outputfile.manifest"; -+ fi' -+ ;; -+ *) -+ # Assume MSVC wrapper -+ hardcode_libdir_flag_spec=' ' -+ allow_undefined_flag=unsupported -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' -+ # The linker will automatically build a .lib file if we build a DLL. -+ old_archive_from_new_cmds='true' -+ # FIXME: Should let the user specify the lib program. -+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' -+ enable_shared_with_static_runtimes=yes -+ ;; -+ esac - ;; - - darwin* | rhapsody*) -@@ -10573,7 +10776,12 @@ - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported -- whole_archive_flag_spec='' -+ if test "$lt_cv_ld_force_load" = "yes"; then -+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' -+ -+ else -+ whole_archive_flag_spec='' -+ fi - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in -@@ -10581,7 +10789,7 @@ - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then -- output_verbose_link_cmd=echo -+ output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -@@ -10599,10 +10807,6 @@ - hardcode_shlibpath_var=no - ;; - -- freebsd1*) -- ld_shlibs=no -- ;; -- - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little -@@ -10615,7 +10819,7 @@ - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -+ freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes -@@ -10624,7 +10828,7 @@ - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) -- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no -@@ -10632,7 +10836,7 @@ - - hpux9*) - if test "$GCC" = yes; then -- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi -@@ -10647,14 +10851,13 @@ - ;; - - hpux10*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then -+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -- hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes -@@ -10666,16 +10869,16 @@ - ;; - - hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) -- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' -+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) -- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else -@@ -10687,7 +10890,46 @@ - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) -- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ -+ # Older versions of the 11.00 compiler do not understand -b yet -+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -+$as_echo_n "checking if $CC understands -b... " >&6; } -+if ${lt_cv_prog_compiler__b+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler__b=no -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS -b" -+ echo "$lt_simple_link_test_code" > conftest.$ac_ext -+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -+ # The linker can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ if test -s conftest.err; then -+ # Append any errors to the config.log. -+ cat conftest.err 1>&5 -+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler__b=yes -+ fi -+ else -+ lt_cv_prog_compiler__b=yes -+ fi -+ fi -+ $RM -r conftest* -+ LDFLAGS="$save_LDFLAGS" -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -+$as_echo "$lt_cv_prog_compiler__b" >&6; } -+ -+if test x"$lt_cv_prog_compiler__b" = xyes; then -+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+else -+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -+fi -+ - ;; - esac - fi -@@ -10715,26 +10957,39 @@ - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. -- save_LDFLAGS="$LDFLAGS" -- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ # This should be the same for all languages, so no per-tag cache variable. -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -+if ${lt_cv_irix_exported_symbol+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --int foo(void) {} -+int foo (void) { return 0; } - _ACEOF - if ac_fn_c_try_link "$LINENO"; then : -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -- -+ lt_cv_irix_exported_symbol=yes -+else -+ lt_cv_irix_exported_symbol=no - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -- LDFLAGS="$save_LDFLAGS" -+ LDFLAGS="$save_LDFLAGS" -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -+$as_echo "$lt_cv_irix_exported_symbol" >&6; } -+ if test "$lt_cv_irix_exported_symbol" = yes; then -+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -+ fi - else -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -@@ -10743,7 +10998,7 @@ - link_all_deplibs=yes - ;; - -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else -@@ -10796,17 +11051,17 @@ - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported -- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -@@ -10816,13 +11071,13 @@ - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ -- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' -@@ -10835,9 +11090,9 @@ - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' -- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) -@@ -11025,44 +11280,50 @@ - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 - $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -- $RM conftest* -- echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+if ${lt_cv_archive_cmds_need_lc+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl -- pic_flag=$lt_prog_compiler_pic -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag -- allow_undefined_flag= -- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl -+ pic_flag=$lt_prog_compiler_pic -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag -+ allow_undefined_flag= -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -- then -- archive_cmds_need_lc=no -- else -- archive_cmds_need_lc=yes -- fi -- allow_undefined_flag=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $RM conftest* -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 --$as_echo "$archive_cmds_need_lc" >&6; } -+ then -+ lt_cv_archive_cmds_need_lc=no -+ else -+ lt_cv_archive_cmds_need_lc=yes -+ fi -+ allow_undefined_flag=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } -+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi -@@ -11220,11 +11481,6 @@ - - - -- -- -- -- -- - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 - $as_echo_n "checking dynamic linker characteristics... " >&6; } - -@@ -11233,16 +11489,23 @@ - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac -- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then -+ case $host_os in -+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; -+ *) lt_sed_strip_eq="s,=/,/,g" ;; -+ esac -+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` -+ case $lt_search_path_spec in -+ *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. -- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` -- else -- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` -+ ;; -+ *) -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` -+ ;; -+ esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= -@@ -11255,7 +11518,7 @@ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done -- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' - BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; -@@ -11275,7 +11538,13 @@ - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } - }'` -- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -+ # AWK program above erroneously prepends '/' to C:/dos/paths -+ # for these hosts. -+ case $host_os in -+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ -+ $SED 's,/\([A-Za-z]:\),\1,g'` ;; -+ esac -+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` - else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - fi -@@ -11301,7 +11570,7 @@ - - case $host_os in - aix3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - -@@ -11310,7 +11579,7 @@ - ;; - - aix[4-9]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes -@@ -11363,7 +11632,7 @@ - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -@@ -11375,7 +11644,7 @@ - ;; - - bsdi[45]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' -@@ -11394,8 +11663,9 @@ - need_version=no - need_lib_prefix=no - -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ case $GCC,$cc_basename in -+ yes,*) -+ # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ -@@ -11416,36 +11686,83 @@ - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+ -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac -+ dynamic_linker='Win32 ld.exe' -+ ;; -+ -+ *,cl*) -+ # Native MSVC -+ libname_spec='$name' -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ library_names_spec='${libname}.dll.lib' -+ -+ case $build_os in -+ mingw*) -+ sys_lib_search_path_spec= -+ lt_save_ifs=$IFS -+ IFS=';' -+ for lt_path in $LIB -+ do -+ IFS=$lt_save_ifs -+ # Let DOS variable expansion print the short 8.3 style file name. -+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` -+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" -+ done -+ IFS=$lt_save_ifs -+ # Convert to MSYS style. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` -+ ;; -+ cygwin*) -+ # Convert to unix form, then to dos form, then back to unix form -+ # but this time dos style (no spaces!) so that the unix form looks -+ # like /cygdrive/c/PROGRA~1:/cygdr... -+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` -+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` -+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ ;; -+ *) -+ sys_lib_search_path_spec="$LIB" -+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -+ # It is most probably a Windows format PATH. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ # FIXME: find the short name or the path components, as spaces are -+ # common. (e.g. "Program Files" -> "PROGRA~1") -+ ;; -+ esac -+ -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes -+ dynamic_linker='Win32 link.exe' - ;; - - *) -+ # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ dynamic_linker='Win32 ld.exe' - ;; - esac -- dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -@@ -11466,7 +11783,7 @@ - ;; - - dgux*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -@@ -11474,10 +11791,6 @@ - shlibpath_var=LD_LIBRARY_PATH - ;; - --freebsd1*) -- dynamic_linker=no -- ;; -- - freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. -@@ -11485,7 +11798,7 @@ - objformat=`/usr/bin/objformat` - else - case $host_os in -- freebsd[123]*) objformat=aout ;; -+ freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi -@@ -11503,7 +11816,7 @@ - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in -- freebsd2*) -+ freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) -@@ -11523,12 +11836,26 @@ - ;; - - gnu*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ -+haiku*) -+ version_type=linux # correct to gnu/linux during the next big refactor -+ need_lib_prefix=no -+ need_version=no -+ dynamic_linker="$host_os runtime_loader" -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -@@ -11574,12 +11901,14 @@ - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' -+ # or fails outright, so override atomically: -+ install_override_mode=555 - ;; - - interix[3-9]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -@@ -11595,7 +11924,7 @@ - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; -@@ -11632,9 +11961,9 @@ - dynamic_linker=no - ;; - --# This must be Linux ELF. --linux* | k*bsd*-gnu) -- version_type=linux -+# This must be glibc/ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -11642,12 +11971,17 @@ - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no -+ - # Some binutils ld are patched to set DT_RUNPATH -- save_LDFLAGS=$LDFLAGS -- save_libdir=$libdir -- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_shlibpath_overrides_runpath=no -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -11660,13 +11994,17 @@ - _ACEOF - if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : -- shlibpath_overrides_runpath=yes -+ lt_cv_shlibpath_overrides_runpath=yes - fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -- LDFLAGS=$save_LDFLAGS -- libdir=$save_libdir -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ -+fi -+ -+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install -@@ -11675,7 +12013,7 @@ - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then -- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - -@@ -11688,18 +12026,6 @@ - dynamic_linker='GNU/Linux ld.so' - ;; - --netbsdelf*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='NetBSD ld.elf_so' -- ;; -- - netbsd*) - version_type=sunos - need_lib_prefix=no -@@ -11719,7 +12045,7 @@ - ;; - - newsos6) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes -@@ -11788,7 +12114,7 @@ - ;; - - solaris*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -11813,7 +12139,7 @@ - ;; - - sysv4 | sysv4.3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -11837,7 +12163,7 @@ - - sysv4*MP*) - if test -d /usr/nec ;then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -11868,7 +12194,7 @@ - - tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -11878,7 +12204,7 @@ - ;; - - uts4*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -11990,6 +12316,11 @@ - - - -+ -+ -+ -+ -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 - $as_echo_n "checking how to hardcode library paths into programs... " >&6; } - hardcode_action= -@@ -12062,7 +12393,7 @@ - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 - $as_echo_n "checking for dlopen in -ldl... " >&6; } --if test "${ac_cv_lib_dl_dlopen+set}" = set; then : -+if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -12096,7 +12427,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 - $as_echo "$ac_cv_lib_dl_dlopen" >&6; } --if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : -+if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else - -@@ -12110,12 +12441,12 @@ - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" --if test "x$ac_cv_func_shl_load" = x""yes; then : -+if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 - $as_echo_n "checking for shl_load in -ldld... " >&6; } --if test "${ac_cv_lib_dld_shl_load+set}" = set; then : -+if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -12149,16 +12480,16 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 - $as_echo "$ac_cv_lib_dld_shl_load" >&6; } --if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : -+if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" - else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" --if test "x$ac_cv_func_dlopen" = x""yes; then : -+if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 - $as_echo_n "checking for dlopen in -ldl... " >&6; } --if test "${ac_cv_lib_dl_dlopen+set}" = set; then : -+if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -12192,12 +12523,12 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 - $as_echo "$ac_cv_lib_dl_dlopen" >&6; } --if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : -+if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 - $as_echo_n "checking for dlopen in -lsvld... " >&6; } --if test "${ac_cv_lib_svld_dlopen+set}" = set; then : -+if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -12231,12 +12562,12 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 - $as_echo "$ac_cv_lib_svld_dlopen" >&6; } --if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : -+if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 - $as_echo_n "checking for dld_link in -ldld... " >&6; } --if test "${ac_cv_lib_dld_dld_link+set}" = set; then : -+if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -12270,7 +12601,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 - $as_echo "$ac_cv_lib_dld_dld_link" >&6; } --if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : -+if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" - fi - -@@ -12311,7 +12642,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 - $as_echo_n "checking whether a program can dlopen itself... " >&6; } --if test "${lt_cv_dlopen_self+set}" = set; then : -+if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test "$cross_compiling" = yes; then : -@@ -12320,7 +12651,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 12323 "configure" -+#line $LINENO "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -12361,7 +12692,13 @@ - # endif - #endif - --void fnord() { int i=42;} -+/* When -fvisbility=hidden is used, assume the code has been annotated -+ correspondingly for the symbols needed. */ -+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -+int fnord () __attribute__((visibility("default"))); -+#endif -+ -+int fnord () { return 42; } - int main () - { - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -@@ -12370,7 +12707,11 @@ - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else -+ { -+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else puts (dlerror ()); -+ } - /* dlclose (self); */ - } - else -@@ -12407,7 +12748,7 @@ - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 - $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } --if test "${lt_cv_dlopen_self_static+set}" = set; then : -+if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test "$cross_compiling" = yes; then : -@@ -12416,7 +12757,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 12419 "configure" -+#line $LINENO "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -12457,7 +12798,13 @@ - # endif - #endif - --void fnord() { int i=42;} -+/* When -fvisbility=hidden is used, assume the code has been annotated -+ correspondingly for the symbols needed. */ -+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -+int fnord () __attribute__((visibility("default"))); -+#endif -+ -+int fnord () { return 42; } - int main () - { - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -@@ -12466,7 +12813,11 @@ - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else -+ { -+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ else puts (dlerror ()); -+ } - /* dlclose (self); */ - } - else -@@ -12584,45 +12935,184 @@ - $as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - -- # On AIX, shared libraries and static libraries use the same namespace, and -- # are all built from PIC. -- case $host_os in -- aix3*) -- test "$enable_shared" = yes && enable_static=no -- if test -n "$RANLIB"; then -- archive_cmds="$archive_cmds~\$RANLIB \$lib" -- postinstall_cmds='$RANLIB $lib' -- fi -- ;; -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; -+ -+ aix[4-9]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi -+ ;; -+ esac -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -+$as_echo "$enable_shared" >&6; } -+ -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -+$as_echo_n "checking whether to build static libraries... " >&6; } -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -+$as_echo "$enable_static" >&6; } -+ -+ -+ -+ -+fi -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+CC="$lt_save_CC" -+ -+ if test -n "$CXX" && ( test "X$CXX" != "Xno" && -+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -+ (test "X$CXX" != "Xg++"))) ; then -+ ac_ext=cpp -+ac_cpp='$CXXCPP $CPPFLAGS' -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -+$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -+if test -z "$CXXCPP"; then -+ if ${ac_cv_prog_CXXCPP+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ # Double quotes because CXXCPP needs to be expanded -+ for CXXCPP in "$CXX -E" "/lib/cpp" -+ do -+ ac_preproc_ok=false -+for ac_cxx_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ # <limits.h> exists even on freestanding compilers. -+ # On the NeXT, cc -E runs the code through the compiler's parser, -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ Syntax error -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ -+else -+ # Broken: fails on valid input. -+continue -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext -+ -+ # OK, works on sane cases. Now check whether nonexistent headers -+ # can be detected and how. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include <ac_nonexistent.h> -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ # Broken: success on invalid input. -+continue -+else -+ # Passes both tests. -+ac_preproc_ok=: -+break -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext -+ -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : -+ break -+fi - -- aix[4-9]*) -- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -- test "$enable_shared" = yes && enable_static=no -- fi -- ;; -- esac -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 --$as_echo "$enable_shared" >&6; } -+ done -+ ac_cv_prog_CXXCPP=$CXXCPP - -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 --$as_echo_n "checking whether to build static libraries... " >&6; } -- # Make sure either enable_shared or enable_static is yes. -- test "$enable_shared" = yes || enable_static=yes -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 --$as_echo "$enable_static" >&6; } -+fi -+ CXXCPP=$ac_cv_prog_CXXCPP -+else -+ ac_cv_prog_CXXCPP=$CXXCPP -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -+$as_echo "$CXXCPP" >&6; } -+ac_preproc_ok=false -+for ac_cxx_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ # <limits.h> exists even on freestanding compilers. -+ # On the NeXT, cc -E runs the code through the compiler's parser, -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ Syntax error -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : - -+else -+ # Broken: fails on valid input. -+continue -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext - -+ # OK, works on sane cases. Now check whether nonexistent headers -+ # can be detected and how. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include <ac_nonexistent.h> -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ # Broken: success on invalid input. -+continue -+else -+ # Passes both tests. -+ac_preproc_ok=: -+break -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext - -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : - -+else -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -+See \`config.log' for more details" "$LINENO" 5; } - fi -+ - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu - --CC="$lt_save_CC" -- -+else -+ _lt_caught_CXX_error=yes -+fi - - ac_ext=cpp - ac_cpp='$CXXCPP $CPPFLAGS' -@@ -12639,7 +13129,6 @@ - hardcode_direct_CXX=no - hardcode_direct_absolute_CXX=no - hardcode_libdir_flag_spec_CXX= --hardcode_libdir_flag_spec_ld_CXX= - hardcode_libdir_separator_CXX= - hardcode_minus_L_CXX=no - hardcode_shlibpath_var_CXX=unsupported -@@ -12649,6 +13138,8 @@ - module_expsym_cmds_CXX= - link_all_deplibs_CXX=unknown - old_archive_cmds_CXX=$old_archive_cmds -+reload_flag_CXX=$reload_flag -+reload_cmds_CXX=$reload_cmds - no_undefined_flag_CXX= - whole_archive_flag_spec_CXX= - enable_shared_with_static_runtimes_CXX=no -@@ -12704,6 +13195,7 @@ - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC -+ lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX -@@ -12721,6 +13213,7 @@ - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} -+ CFLAGS=$CXXFLAGS - compiler=$CC - compiler_CXX=$CC - for cc_temp in $compiler""; do -@@ -12731,7 +13224,7 @@ - *) break;; - esac - done --cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - - if test -n "$compiler"; then -@@ -12794,7 +13287,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 - $as_echo_n "checking for non-GNU ld... " >&6; } - fi --if test "${lt_cv_path_LD+set}" = set; then : -+if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -z "$LD"; then -@@ -12831,10 +13324,10 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 - $as_echo "no" >&6; } - fi --test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 -+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 - $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } --if test "${lt_cv_prog_gnu_ld+set}" = set; then : -+if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 - else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -@@ -12860,8 +13353,8 @@ - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -@@ -12893,7 +13386,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no -@@ -13003,7 +13496,13 @@ - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if test "${lt_cv_aix_libpath+set}" = set; then -+ aix_libpath=$lt_cv_aix_libpath -+else -+ if ${lt_cv_aix_libpath__CXX+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -13016,26 +13515,33 @@ - _ACEOF - if ac_fn_cxx_try_link "$LINENO"; then : - --lt_aix_libpath_sed=' -- /Import File Strings/,/^$/ { -- /^0/ { -- s/^0 *\(.*\)$/\1/ -- p -- } -- }' --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then -- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --fi -+ lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *\([^ ]*\) *$/\1/ -+ p -+ } -+ }' -+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ # Check for a 64-bit object if we didn't find anything. -+ if test -z "$lt_cv_aix_libpath__CXX"; then -+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+ if test -z "$lt_cv_aix_libpath__CXX"; then -+ lt_cv_aix_libpath__CXX="/usr/lib:/lib" -+ fi -+ -+fi -+ -+ aix_libpath=$lt_cv_aix_libpath__CXX -+fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - -- archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' -@@ -13044,7 +13550,13 @@ - else - # Determine the default libpath from the value encoded in an - # empty executable. -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if test "${lt_cv_aix_libpath+set}" = set; then -+ aix_libpath=$lt_cv_aix_libpath -+else -+ if ${lt_cv_aix_libpath__CXX+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -13057,30 +13569,42 @@ - _ACEOF - if ac_fn_cxx_try_link "$LINENO"; then : - --lt_aix_libpath_sed=' -- /Import File Strings/,/^$/ { -- /^0/ { -- s/^0 *\(.*\)$/\1/ -- p -- } -- }' --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then -- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` --fi -+ lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *\([^ ]*\) *$/\1/ -+ p -+ } -+ }' -+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ # Check for a 64-bit object if we didn't find anything. -+ if test -z "$lt_cv_aix_libpath__CXX"; then -+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+ fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+ if test -z "$lt_cv_aix_libpath__CXX"; then -+ lt_cv_aix_libpath__CXX="/usr/lib:/lib" -+ fi -+ -+fi -+ -+ aix_libpath=$lt_cv_aix_libpath__CXX -+fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec_CXX='$convenience' -+ if test "$with_gnu_ld" = yes; then -+ # We only use this code for GNU lds that support --whole-archive. -+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ else -+ # Exported symbols can be pulled into shared objects from archives -+ whole_archive_flag_spec_CXX='$convenience' -+ fi - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared - # libraries. -@@ -13110,28 +13634,75 @@ - ;; - - cygwin* | mingw* | pw32* | cegcc*) -- # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, -- # as there is no search path for DLLs. -- hardcode_libdir_flag_spec_CXX='-L$libdir' -- allow_undefined_flag_CXX=unsupported -- always_export_symbols_CXX=no -- enable_shared_with_static_runtimes_CXX=yes -- -- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -- else -- ld_shlibs_CXX=no -- fi -- ;; -+ case $GXX,$cc_basename in -+ ,cl* | no,cl*) -+ # Native MSVC -+ # hardcode_libdir_flag_spec is actually meaningless, as there is -+ # no search path for DLLs. -+ hardcode_libdir_flag_spec_CXX=' ' -+ allow_undefined_flag_CXX=unsupported -+ always_export_symbols_CXX=yes -+ file_list_spec_CXX='@' -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' -+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; -+ else -+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; -+ fi~ -+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ -+ linknames=' -+ # The linker will not automatically build a static lib if we build a DLL. -+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' -+ enable_shared_with_static_runtimes_CXX=yes -+ # Don't use ranlib -+ old_postinstall_cmds_CXX='chmod 644 $oldlib' -+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ -+ lt_tool_outputfile="@TOOL_OUTPUT@"~ -+ case $lt_outputfile in -+ *.exe|*.EXE) ;; -+ *) -+ lt_outputfile="$lt_outputfile.exe" -+ lt_tool_outputfile="$lt_tool_outputfile.exe" -+ ;; -+ esac~ -+ func_to_tool_file "$lt_outputfile"~ -+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then -+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; -+ $RM "$lt_outputfile.manifest"; -+ fi' -+ ;; -+ *) -+ # g++ -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, -+ # as there is no search path for DLLs. -+ hardcode_libdir_flag_spec_CXX='-L$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' -+ allow_undefined_flag_CXX=unsupported -+ always_export_symbols_CXX=no -+ enable_shared_with_static_runtimes_CXX=yes -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ ld_shlibs_CXX=no -+ fi -+ ;; -+ esac -+ ;; - darwin* | rhapsody*) - - -@@ -13139,7 +13710,12 @@ - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported -- whole_archive_flag_spec_CXX='' -+ if test "$lt_cv_ld_force_load" = "yes"; then -+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' -+ -+ else -+ whole_archive_flag_spec_CXX='' -+ fi - link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" - case $cc_basename in -@@ -13147,7 +13723,7 @@ - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then -- output_verbose_link_cmd=echo -+ output_verbose_link_cmd=func_echo_all - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -@@ -13181,7 +13757,7 @@ - esac - ;; - -- freebsd[12]*) -+ freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - ld_shlibs_CXX=no -@@ -13200,6 +13776,11 @@ - gnu*) - ;; - -+ haiku*) -+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ link_all_deplibs_CXX=yes -+ ;; -+ - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: -@@ -13224,11 +13805,11 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then -- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no -@@ -13289,7 +13870,7 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then -@@ -13299,10 +13880,10 @@ - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) -- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) -- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi -@@ -13332,7 +13913,7 @@ - case $cc_basename in - CC*) - # SGI C++ -- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is -@@ -13343,9 +13924,9 @@ - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' -+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - link_all_deplibs_CXX=yes -@@ -13356,7 +13937,7 @@ - inherit_rpath_CXX=yes - ;; - -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler -@@ -13374,7 +13955,7 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -@@ -13411,26 +13992,26 @@ - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in -- *pgCC\ [1-5]* | *pgcpp\ [1-5]*) -+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*) - prelink_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ -- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' -+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - old_archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ -- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ -+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; -- *) # Version 6 will use weak symbols -+ *) # Version 6 and above use weak symbols - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; -@@ -13438,7 +14019,7 @@ - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ -@@ -13457,9 +14038,9 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; -- xl*) -+ xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -@@ -13479,13 +14060,13 @@ - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - hardcode_libdir_flag_spec_CXX='-R$libdir' -- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object_CXX=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. -- output_verbose_link_cmd='echo' -+ output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is -@@ -13554,7 +14135,7 @@ - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi -- output_verbose_link_cmd=echo -+ output_verbose_link_cmd=func_echo_all - else - ld_shlibs_CXX=no - fi -@@ -13589,15 +14170,15 @@ - case $host in - osf3*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - ;; - *) - allow_undefined_flag_CXX=' -expect_unresolved \*' -- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ -- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ -+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - ;; -@@ -13613,17 +14194,17 @@ - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) -- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) -- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - -@@ -13633,7 +14214,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support -@@ -13669,7 +14250,7 @@ - - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' -@@ -13690,7 +14271,7 @@ - esac - link_all_deplibs_CXX=yes - -- output_verbose_link_cmd='echo' -+ output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is -@@ -13710,14 +14291,14 @@ - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then -- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. -@@ -13728,7 +14309,7 @@ - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. -- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' -@@ -13782,6 +14363,10 @@ - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ -+ '"$old_archive_cmds_CXX" -+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ -+ '"$reload_cmds_CXX" - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -@@ -13843,6 +14428,14 @@ - }; - _LT_EOF - -+ -+_lt_libdeps_save_CFLAGS=$CFLAGS -+case "$CC $CFLAGS " in #( -+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -+esac -+ - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? -@@ -13856,7 +14449,7 @@ - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do -- case $p in -+ case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. -@@ -13865,13 +14458,22 @@ - test $p = "-R"; then - prev=$p - continue -- else -- prev= - fi - -+ # Expand the sysroot to ease extracting the directories later. -+ if test -z "$prev"; then -+ case $p in -+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; -+ esac -+ fi -+ case $p in -+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; -+ esac - if test "$pre_test_object_deps_done" = no; then -- case $p in -- -L* | -R*) -+ case ${prev} in -+ -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. -@@ -13891,8 +14493,10 @@ - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi -+ prev= - ;; - -+ *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. -@@ -13928,6 +14532,7 @@ - fi - - $RM -f confest.$objext -+CFLAGS=$_lt_libdeps_save_CFLAGS - - # PORTME: override above test on systems where it is broken - case $host_os in -@@ -13963,7 +14568,7 @@ - - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as -@@ -14028,8 +14633,6 @@ - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX= - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 --$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then -@@ -14079,6 +14682,11 @@ - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; -+ haiku*) -+ # PIC is the default for Haiku. -+ # The "-static" flag exists, but is broken. -+ lt_prog_compiler_static_CXX= -+ ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. -@@ -14128,6 +14736,11 @@ - ;; - esac - ;; -+ mingw* | cygwin* | os2* | pw32* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' -+ ;; - dgux*) - case $cc_basename in - ec++*) -@@ -14184,7 +14797,7 @@ - ;; - esac - ;; -- linux* | k*bsd*-gnu) -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler -@@ -14217,8 +14830,8 @@ - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; -- xlc* | xlC*) -- # IBM XL 8.0 on PPC -+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) -+ # IBM XL 8.0, 9.0 on PPC and BlueGene - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-qpic' - lt_prog_compiler_static_CXX='-qstaticlink' -@@ -14248,7 +14861,7 @@ - ;; - esac - ;; -- netbsd* | netbsdelf*-gnu) -+ netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise -@@ -14280,7 +14893,7 @@ - ;; - solaris*) - case $cc_basename in -- CC*) -+ CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' -@@ -14345,10 +14958,17 @@ - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; - esac --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 --$as_echo "$lt_prog_compiler_pic_CXX" >&6; } -- - -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -+$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -+if ${lt_cv_prog_compiler_pic_CXX+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 -+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } -+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX - - # - # Check to make sure the PIC flag actually works. -@@ -14356,7 +14976,7 @@ - if test -n "$lt_prog_compiler_pic_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 - $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } --if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then : -+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_pic_works_CXX=no -@@ -14372,15 +14992,15 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:14375: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:14379: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_CXX=yes -@@ -14406,13 +15026,15 @@ - - - -+ -+ - # - # Check to make sure the static flag actually works. - # - wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 - $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } --if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then : -+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_static_works_CXX=no -@@ -14425,7 +15047,7 @@ - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 -- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_CXX=yes -@@ -14452,7 +15074,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 - $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } --if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : -+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_c_o_CXX=no -@@ -14471,16 +15093,16 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:14474: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:14478: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes -@@ -14504,7 +15126,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 - $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } --if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : -+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : - $as_echo_n "(cached) " >&6 - else - lt_cv_prog_compiler_c_o_CXX=no -@@ -14523,16 +15145,16 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:14526: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:14530: \$? = $ac_status" >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings -- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes -@@ -14583,30 +15205,37 @@ - $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - case $host_os in - aix[4-9]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ # Also, AIX nm treats weak defined symbols like other global defined -+ # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" -- ;; -+ ;; - cygwin* | mingw* | cegcc*) -- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -- linux* | k*bsd*-gnu) -- link_all_deplibs_CXX=no -- ;; -+ case $cc_basename in -+ cl*) -+ exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' -+ ;; -+ *) -+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' -+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' -+ ;; -+ esac -+ ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -+ ;; - esac -- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 - $as_echo "$ld_shlibs_CXX" >&6; } -@@ -14638,44 +15267,50 @@ - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 - $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -- $RM conftest* -- echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl_CXX -- pic_flag=$lt_prog_compiler_pic_CXX -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX -- allow_undefined_flag_CXX= -- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl_CXX -+ pic_flag=$lt_prog_compiler_pic_CXX -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX -+ allow_undefined_flag_CXX= -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -- then -- archive_cmds_need_lc_CXX=no -- else -- archive_cmds_need_lc_CXX=yes -- fi -- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $RM conftest* -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5 --$as_echo "$archive_cmds_need_lc_CXX" >&6; } -+ then -+ lt_cv_archive_cmds_need_lc_CXX=no -+ else -+ lt_cv_archive_cmds_need_lc_CXX=yes -+ fi -+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 -+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } -+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX - ;; - esac - fi -@@ -14743,8 +15378,6 @@ - - - -- -- - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 - $as_echo_n "checking dynamic linker characteristics... " >&6; } - -@@ -14770,7 +15403,7 @@ - - case $host_os in - aix3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - -@@ -14779,7 +15412,7 @@ - ;; - - aix[4-9]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes -@@ -14832,7 +15465,7 @@ - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -@@ -14844,7 +15477,7 @@ - ;; - - bsdi[45]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' -@@ -14863,8 +15496,9 @@ - need_version=no - need_lib_prefix=no - -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ case $GCC,$cc_basename in -+ yes,*) -+ # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ -@@ -14885,36 +15519,82 @@ - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+ - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac -+ dynamic_linker='Win32 ld.exe' -+ ;; -+ -+ *,cl*) -+ # Native MSVC -+ libname_spec='$name' -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ library_names_spec='${libname}.dll.lib' -+ -+ case $build_os in -+ mingw*) -+ sys_lib_search_path_spec= -+ lt_save_ifs=$IFS -+ IFS=';' -+ for lt_path in $LIB -+ do -+ IFS=$lt_save_ifs -+ # Let DOS variable expansion print the short 8.3 style file name. -+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` -+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" -+ done -+ IFS=$lt_save_ifs -+ # Convert to MSYS style. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` -+ ;; -+ cygwin*) -+ # Convert to unix form, then to dos form, then back to unix form -+ # but this time dos style (no spaces!) so that the unix form looks -+ # like /cygdrive/c/PROGRA~1:/cygdr... -+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` -+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` -+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ ;; -+ *) -+ sys_lib_search_path_spec="$LIB" -+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -+ # It is most probably a Windows format PATH. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ # FIXME: find the short name or the path components, as spaces are -+ # common. (e.g. "Program Files" -> "PROGRA~1") -+ ;; -+ esac -+ -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes -+ dynamic_linker='Win32 link.exe' - ;; - - *) -+ # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ dynamic_linker='Win32 ld.exe' - ;; - esac -- dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -@@ -14934,7 +15614,7 @@ - ;; - - dgux*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -@@ -14942,10 +15622,6 @@ - shlibpath_var=LD_LIBRARY_PATH - ;; - --freebsd1*) -- dynamic_linker=no -- ;; -- - freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. -@@ -14953,7 +15629,7 @@ - objformat=`/usr/bin/objformat` - else - case $host_os in -- freebsd[123]*) objformat=aout ;; -+ freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi -@@ -14971,7 +15647,7 @@ - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in -- freebsd2*) -+ freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) -@@ -14991,12 +15667,26 @@ - ;; - - gnu*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ -+haiku*) -+ version_type=linux # correct to gnu/linux during the next big refactor -+ need_lib_prefix=no -+ need_version=no -+ dynamic_linker="$host_os runtime_loader" -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -@@ -15042,12 +15732,14 @@ - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' -+ # or fails outright, so override atomically: -+ install_override_mode=555 - ;; - - interix[3-9]*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -@@ -15063,7 +15755,7 @@ - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; -@@ -15100,9 +15792,9 @@ - dynamic_linker=no - ;; - --# This must be Linux ELF. --linux* | k*bsd*-gnu) -- version_type=linux -+# This must be glibc/ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -15110,12 +15802,17 @@ - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no -+ - # Some binutils ld are patched to set DT_RUNPATH -- save_LDFLAGS=$LDFLAGS -- save_libdir=$libdir -- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ -- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_shlibpath_overrides_runpath=no -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -15128,13 +15825,17 @@ - _ACEOF - if ac_fn_cxx_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : -- shlibpath_overrides_runpath=yes -+ lt_cv_shlibpath_overrides_runpath=yes - fi - fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -- LDFLAGS=$save_LDFLAGS -- libdir=$save_libdir -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ -+fi -+ -+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install -@@ -15143,7 +15844,7 @@ - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then -- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - -@@ -15156,18 +15857,6 @@ - dynamic_linker='GNU/Linux ld.so' - ;; - --netbsdelf*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='NetBSD ld.elf_so' -- ;; -- - netbsd*) - version_type=sunos - need_lib_prefix=no -@@ -15187,7 +15876,7 @@ - ;; - - newsos6) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes -@@ -15256,7 +15945,7 @@ - ;; - - solaris*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -15281,7 +15970,7 @@ - ;; - - sysv4 | sysv4.3*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -15305,7 +15994,7 @@ - - sysv4*MP*) - if test -d /usr/nec ;then -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -15336,7 +16025,7 @@ - - tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -@@ -15346,7 +16035,7 @@ - ;; - - uts4*) -- version_type=linux -+ version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH -@@ -15407,6 +16096,8 @@ - - - -+ -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 - $as_echo_n "checking how to hardcode library paths into programs... " >&6; } - hardcode_action_CXX= -@@ -15454,6 +16145,7 @@ - fi # test -n "$compiler" - - CC=$lt_save_CC -+ CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC -@@ -15482,6 +16174,8 @@ - - - -+ -+ - ac_config_commands="$ac_config_commands libtool" - - -@@ -15494,7 +16188,7 @@ - $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } - set x ${MAKE-make} - ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` --if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 - else - cat >conftest.make <<\_ACEOF -@@ -15502,7 +16196,7 @@ - all: - @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF --# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. - case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; -@@ -15541,7 +16235,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 - $as_echo_n "checking for special C compiler options needed for large files... " >&6; } --if test "${ac_cv_sys_largefile_CC+set}" = set; then : -+if ${ac_cv_sys_largefile_CC+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_cv_sys_largefile_CC=no -@@ -15592,7 +16286,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 - $as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } --if test "${ac_cv_sys_file_offset_bits+set}" = set; then : -+if ${ac_cv_sys_file_offset_bits+:} false; then : - $as_echo_n "(cached) " >&6 - else - while :; do -@@ -15661,7 +16355,7 @@ - if test $ac_cv_sys_file_offset_bits = unknown; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 - $as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } --if test "${ac_cv_sys_large_files+set}" = set; then : -+if ${ac_cv_sys_large_files+:} false; then : - $as_echo_n "(cached) " >&6 - else - while :; do -@@ -15732,13 +16426,18 @@ - - - -+ -+ -+ -+ -+ - if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. - set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : -+if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $PKG_CONFIG in -@@ -15781,7 +16480,7 @@ - set dummy pkg-config; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : -+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $ac_pt_PKG_CONFIG in -@@ -15844,15 +16543,13 @@ - $as_echo "no" >&6; } - PKG_CONFIG="" - fi -- - fi - - for ac_header in sys/ioccom.h sys/inotify.h - do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` - ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" --eval as_val=\$$as_ac_Header -- if test "x$as_val" = x""yes; then : -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF - #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 - _ACEOF -@@ -15953,11 +16650,11 @@ - as_ac_File=`$as_echo "ac_cv_file_$dir/pci.ids" | $as_tr_sh` - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $dir/pci.ids" >&5 - $as_echo_n "checking for $dir/pci.ids... " >&6; } --if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$as_ac_File+:} false; then : - $as_echo_n "(cached) " >&6 - else - test "$cross_compiling" = yes && -- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 -+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 - if test -r "$dir/pci.ids"; then - eval "$as_ac_File=yes" - else -@@ -15967,14 +16664,13 @@ - eval ac_res=\$$as_ac_File - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } --eval as_val=\$$as_ac_File -- if test "x$as_val" = x""yes; then : -+if eval test \"x\$"$as_ac_File"\" = x"yes"; then : - PCI_IDS_DIR=$dir - fi - - done - if test -z "$PCI_IDS_DIR"; then -- as_fn_error "cannot find pci.ids. Use --with-pci-ids to specify location" "$LINENO" 5 -+ as_fn_error $? "cannot find pci.ids. Use --with-pci-ids to specify location" "$LINENO" 5 - else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: autodetected pci.ids in $PCI_IDS_DIR" >&5 - $as_echo "$as_me: WARNING: autodetected pci.ids in $PCI_IDS_DIR" >&2;} -@@ -15994,11 +16690,11 @@ - as_ac_File=`$as_echo "ac_cv_file_$dir/usb.ids" | $as_tr_sh` - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $dir/usb.ids" >&5 - $as_echo_n "checking for $dir/usb.ids... " >&6; } --if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : -+if eval \${$as_ac_File+:} false; then : - $as_echo_n "(cached) " >&6 - else - test "$cross_compiling" = yes && -- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 -+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 - if test -r "$dir/usb.ids"; then - eval "$as_ac_File=yes" - else -@@ -16008,14 +16704,13 @@ - eval ac_res=\$$as_ac_File - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 - $as_echo "$ac_res" >&6; } --eval as_val=\$$as_ac_File -- if test "x$as_val" = x""yes; then : -+if eval test \"x\$"$as_ac_File"\" = x"yes"; then : - USB_IDS_DIR=$dir - fi - - done - if test -z "$USB_IDS_DIR"; then -- as_fn_error "cannot find usb.ids. Use --with-usb-ids to specify location" "$LINENO" 5 -+ as_fn_error $? "cannot find usb.ids. Use --with-usb-ids to specify location" "$LINENO" 5 - else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: autodetected usb.ids in $USB_IDS_DIR" >&5 - $as_echo "$as_me: WARNING: autodetected usb.ids in $USB_IDS_DIR" >&2;} -@@ -16165,7 +16860,7 @@ - set dummy pkg-config; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : -+if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $PKG_CONFIG in -@@ -16352,7 +17047,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uuid_generate in -luuid" >&5 - $as_echo_n "checking for uuid_generate in -luuid... " >&6; } --if test "${ac_cv_lib_uuid_uuid_generate+set}" = set; then : -+if ${ac_cv_lib_uuid_uuid_generate+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -16386,7 +17081,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_uuid_uuid_generate" >&5 - $as_echo "$ac_cv_lib_uuid_uuid_generate" >&6; } --if test "x$ac_cv_lib_uuid_uuid_generate" = x""yes; then : -+if test "x$ac_cv_lib_uuid_uuid_generate" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_LIBUUID 1 - _ACEOF -@@ -16394,12 +17089,12 @@ - LIBS="-luuid $LIBS" - - else -- as_fn_error "*** uuid library (libuuid) not found" "$LINENO" 5 -+ as_fn_error $? "*** uuid library (libuuid) not found" "$LINENO" 5 - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 - $as_echo_n "checking for dlopen in -ldl... " >&6; } --if test "${ac_cv_lib_dl_dlopen+set}" = set; then : -+if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -16433,7 +17128,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 - $as_echo "$ac_cv_lib_dl_dlopen" >&6; } --if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : -+if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_LIBDL 1 - _ACEOF -@@ -16441,7 +17136,7 @@ - LIBS="-ldl $LIBS" - - else -- as_fn_error "*** dl library (libdl) not found" "$LINENO" 5 -+ as_fn_error $? "*** dl library (libdl) not found" "$LINENO" 5 - fi - - -@@ -16452,8 +17147,8 @@ - if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot run test program while cross compiling --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "cannot run test program while cross compiling -+See \`config.log' for more details" "$LINENO" 5; } - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -@@ -16481,7 +17176,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 - $as_echo "" >&6; } - else -- as_fn_error "*** Requires libparted == 1.7.1 or >= 1.8.0" "$LINENO" 5 -+ as_fn_error $? "*** Requires libparted == 1.7.1 or >= 1.8.0" "$LINENO" 5 - fi - rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -@@ -16496,46 +17191,46 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PARTED" >&5 - $as_echo_n "checking for PARTED... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$PARTED_CFLAGS"; then -- pkg_cv_PARTED_CFLAGS="$PARTED_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$PARTED_CFLAGS"; then -+ pkg_cv_PARTED_CFLAGS="$PARTED_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libparted\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libparted") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_PARTED_CFLAGS=`$PKG_CONFIG --cflags "libparted" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$PARTED_LIBS"; then -- pkg_cv_PARTED_LIBS="$PARTED_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$PARTED_LIBS"; then -+ pkg_cv_PARTED_LIBS="$PARTED_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libparted\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libparted") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_PARTED_LIBS=`$PKG_CONFIG --libs "libparted" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -16543,14 +17238,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- PARTED_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libparted"` -+ PARTED_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libparted" 2>&1` - else -- PARTED_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libparted"` -+ PARTED_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libparted" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$PARTED_PKG_ERRORS" >&5 - -- as_fn_error "Package requirements (libparted) were not met: -+ as_fn_error $? "Package requirements (libparted) were not met: - - $PARTED_PKG_ERRORS - -@@ -16559,12 +17254,13 @@ - - Alternatively, you may set the environment variables PARTED_CFLAGS - and PARTED_LIBS to avoid the need to call pkg-config. --See the pkg-config man page for more details. --" "$LINENO" 5 -+See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "The pkg-config script could not be found or is too old. Make sure it -+as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - -@@ -16573,13 +17269,13 @@ - See the pkg-config man page for more details. - - To get pkg-config, see <http://pkg-config.freedesktop.org/>. --See \`config.log' for more details." "$LINENO" 5; } -+See \`config.log' for more details" "$LINENO" 5; } - else - PARTED_CFLAGS=$pkg_cv_PARTED_CFLAGS - PARTED_LIBS=$pkg_cv_PARTED_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 - $as_echo "yes" >&6; } -- : -+ - fi - fi - -@@ -16677,7 +17373,7 @@ - fi - else - if test x$enable_gcov = xyes; then -- as_fn_error "--enable-gcov can only be used with gcc" "$LINENO" 5 -+ as_fn_error $? "--enable-gcov can only be used with gcc" "$LINENO" 5 - fi - fi - -@@ -16703,21 +17399,21 @@ - for ac_header in expat.h - do : - ac_fn_c_check_header_mongrel "$LINENO" "expat.h" "ac_cv_header_expat_h" "$ac_includes_default" --if test "x$ac_cv_header_expat_h" = x""yes; then : -+if test "x$ac_cv_header_expat_h" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_EXPAT_H 1 - _ACEOF - $as_echo "#define HAVE_EXPAT_H 1" >>confdefs.h - - else -- as_fn_error "Can't find expat.h. Please install expat." "$LINENO" 5 -+ as_fn_error $? "Can't find expat.h. Please install expat." "$LINENO" 5 - fi - - done - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML_ParserCreate in -lexpat" >&5 - $as_echo_n "checking for XML_ParserCreate in -lexpat... " >&6; } --if test "${ac_cv_lib_expat_XML_ParserCreate+set}" = set; then : -+if ${ac_cv_lib_expat_XML_ParserCreate+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -16751,10 +17447,10 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_expat_XML_ParserCreate" >&5 - $as_echo "$ac_cv_lib_expat_XML_ParserCreate" >&6; } --if test "x$ac_cv_lib_expat_XML_ParserCreate" = x""yes; then : -+if test "x$ac_cv_lib_expat_XML_ParserCreate" = xyes; then : - EXPAT_LIB="-lexpat" - else -- as_fn_error "Can't find expat library. Please install expat." "$LINENO" 5 -+ as_fn_error $? "Can't find expat library. Please install expat." "$LINENO" 5 - fi - - -@@ -16770,7 +17466,7 @@ - for ac_header in usb.h - do : - ac_fn_c_check_header_mongrel "$LINENO" "usb.h" "ac_cv_header_usb_h" "$ac_includes_default" --if test "x$ac_cv_header_usb_h" = x""yes; then : -+if test "x$ac_cv_header_usb_h" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_USB_H 1 - _ACEOF -@@ -16784,7 +17480,7 @@ - if test "x$USE_LIBUSB" = "xyes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for usb_find_devices in -lusb" >&5 - $as_echo_n "checking for usb_find_devices in -lusb... " >&6; } --if test "${ac_cv_lib_usb_usb_find_devices+set}" = set; then : -+if ${ac_cv_lib_usb_usb_find_devices+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -16818,7 +17514,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_usb_usb_find_devices" >&5 - $as_echo "$ac_cv_lib_usb_usb_find_devices" >&6; } --if test "x$ac_cv_lib_usb_usb_find_devices" = x""yes; then : -+if test "x$ac_cv_lib_usb_usb_find_devices" = xyes; then : - USE_LIBUSB=yes - else - USE_LIBUSB=no -@@ -16853,7 +17549,7 @@ - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SMBIOSFreeMemory in -lsmbios" >&5 - $as_echo_n "checking for SMBIOSFreeMemory in -lsmbios... " >&6; } --if test "${ac_cv_lib_smbios_SMBIOSFreeMemory+set}" = set; then : -+if ${ac_cv_lib_smbios_SMBIOSFreeMemory+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -16887,7 +17583,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_smbios_SMBIOSFreeMemory" >&5 - $as_echo "$ac_cv_lib_smbios_SMBIOSFreeMemory" >&6; } --if test "x$ac_cv_lib_smbios_SMBIOSFreeMemory" = x""yes; then : -+if test "x$ac_cv_lib_smbios_SMBIOSFreeMemory" = xyes; then : - LIB_SMBIOS=yes - else - LIB_SMBIOS=no -@@ -16906,8 +17602,8 @@ - if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot run test program while cross compiling --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "cannot run test program while cross compiling -+See \`config.log' for more details" "$LINENO" 5; } - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -@@ -16972,8 +17668,8 @@ - if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "cannot run test program while cross compiling --See \`config.log' for more details." "$LINENO" 5; } -+as_fn_error $? "cannot run test program while cross compiling -+See \`config.log' for more details" "$LINENO" 5; } - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -@@ -17036,13 +17732,13 @@ - for ac_header in pci/pci.h - do : - ac_fn_c_check_header_mongrel "$LINENO" "pci/pci.h" "ac_cv_header_pci_pci_h" "$ac_includes_default" --if test "x$ac_cv_header_pci_pci_h" = x""yes; then : -+if test "x$ac_cv_header_pci_pci_h" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_PCI_PCI_H 1 - _ACEOF - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pci_init in -lpci" >&5 - $as_echo_n "checking for pci_init in -lpci... " >&6; } --if test "${ac_cv_lib_pci_pci_init+set}" = set; then : -+if ${ac_cv_lib_pci_pci_init+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -17076,7 +17772,7 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pci_pci_init" >&5 - $as_echo "$ac_cv_lib_pci_pci_init" >&6; } --if test "x$ac_cv_lib_pci_pci_init" = x""yes; then : -+if test "x$ac_cv_lib_pci_pci_init" = xyes; then : - USE_LIBPCI="yes" - fi - -@@ -17094,9 +17790,6 @@ - fi - - --USE_LIBUSB20=no --USE_LIBUSB=no --LIBUSB20_LIBS="" - - # Check whether --with-backend was given. - if test "${with_backend+set}" = set; then : -@@ -17155,9 +17848,12 @@ - - - if test "x$HALD_BACKEND" = "xfreebsd"; then -+ USE_BSDLIBUSB20=no -+ USE_BSDLIBUSB=no -+ LIBUSB20_LIBS="" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libusb20_dev_get_info in -lusb20" >&5 - $as_echo_n "checking for libusb20_dev_get_info in -lusb20... " >&6; } --if test "${ac_cv_lib_usb20_libusb20_dev_get_info+set}" = set; then : -+if ${ac_cv_lib_usb20_libusb20_dev_get_info+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -17191,17 +17887,16 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_usb20_libusb20_dev_get_info" >&5 - $as_echo "$ac_cv_lib_usb20_libusb20_dev_get_info" >&6; } --if test "x$ac_cv_lib_usb20_libusb20_dev_get_info" = x""yes; then : -- USE_LIBUSB20=yes -+if test "x$ac_cv_lib_usb20_libusb20_dev_get_info" = xyes; then : -+ USE_BSDLIBUSB20=yes - else -- USE_LIBUSB20=no -+ USE_BSDLIBUSB20=no - fi - --fi --if test "x$USE_LIBUSB20" = "xno"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libusb20_dev_get_info in -lusb" >&5 -+ if test "x$USE_BSDLIBUSB20" = "xno"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libusb20_dev_get_info in -lusb" >&5 - $as_echo_n "checking for libusb20_dev_get_info in -lusb... " >&6; } --if test "${ac_cv_lib_usb_libusb20_dev_get_info+set}" = set; then : -+if ${ac_cv_lib_usb_libusb20_dev_get_info+:} false; then : - $as_echo_n "(cached) " >&6 - else - ac_check_lib_save_LIBS=$LIBS -@@ -17235,22 +17930,14 @@ - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_usb_libusb20_dev_get_info" >&5 - $as_echo "$ac_cv_lib_usb_libusb20_dev_get_info" >&6; } --if test "x$ac_cv_lib_usb_libusb20_dev_get_info" = x""yes; then : -- USE_LIBUSB=yes --else -- USE_LIBUSB=no --fi -- --fi -- if test "x$USE_LIBUSB20" = "xyes"; then -- HAVE_LIBUSB20_TRUE= -- HAVE_LIBUSB20_FALSE='#' -+if test "x$ac_cv_lib_usb_libusb20_dev_get_info" = xyes; then : -+ USE_BSDLIBUSB=yes - else -- HAVE_LIBUSB20_TRUE='#' -- HAVE_LIBUSB20_FALSE= -+ USE_BSDLIBUSB=no - fi - -- if test "x$USE_LIBUSB" = "xyes"; then -+ fi -+ if test "x$USE_BSDLIBUSB20" = "xyes" -o "x$USE_BSDLIBUSB" = "xyes"; then - HAVE_LIBUSB20_TRUE= - HAVE_LIBUSB20_FALSE='#' - else -@@ -17258,18 +17945,28 @@ - HAVE_LIBUSB20_FALSE= - fi - --if test "x$USE_LIBUSB20" = "xyes"; then -+ if test "x$USE_BSDLIBUSB20" = "xyes"; then - - $as_echo "#define HAVE_LIBUSB20 1" >>confdefs.h - -- LIBUSB20_LIBS="-lusb20" --elif test "x$USE_LIBUSB" = "xyes"; then -+ LIBUSB20_LIBS="-lusb20" -+ elif test "x$USE_BSDLIBUSB" = "xyes"; then - - $as_echo "#define HAVE_LIBUSB20 1" >>confdefs.h - -- LIBUSB20_LIBS="-lusb" -+ LIBUSB20_LIBS="-lusb" -+ fi -+ -+else -+ if false; then -+ HAVE_LIBUSB20_TRUE= -+ HAVE_LIBUSB20_FALSE='#' -+else -+ HAVE_LIBUSB20_TRUE='#' -+ HAVE_LIBUSB20_FALSE= - fi - -+fi - - - cat >>confdefs.h <<_ACEOF -@@ -17335,7 +18032,7 @@ - set dummy gperf; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_GPERF+set}" = set; then : -+if ${ac_cv_path_GPERF+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $GPERF in -@@ -17443,53 +18140,53 @@ - msg_polkit=no - if test "x$enable_policy_kit" != "xno"; then - if test "x$enable_console_kit" = "xno"; then -- as_fn_error "PolicyKit support requires building with ConsoleKit support too" "$LINENO" 5 -+ as_fn_error $? "PolicyKit support requires building with ConsoleKit support too" "$LINENO" 5 - fi - - pkg_failed=no - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for POLKIT" >&5 - $as_echo_n "checking for POLKIT... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$POLKIT_CFLAGS"; then -- pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$POLKIT_CFLAGS"; then -+ pkg_cv_POLKIT_CFLAGS="$POLKIT_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$polkit_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$polkit_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_POLKIT_CFLAGS=`$PKG_CONFIG --cflags "$polkit_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$POLKIT_LIBS"; then -- pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$POLKIT_LIBS"; then -+ pkg_cv_POLKIT_LIBS="$POLKIT_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$polkit_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$polkit_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_POLKIT_LIBS=`$PKG_CONFIG --libs "$polkit_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -17497,16 +18194,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$polkit_module"` -+ POLKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$polkit_module" 2>&1` - else -- POLKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$polkit_module"` -+ POLKIT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$polkit_module" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$POLKIT_PKG_ERRORS" >&5 - -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -- if false; then -+ if false; then - HAVE_POLKIT_TRUE= - HAVE_POLKIT_FALSE='#' - else -@@ -17515,6 +18210,8 @@ - fi - - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - if false; then - HAVE_POLKIT_TRUE= - HAVE_POLKIT_FALSE='#' -@@ -17544,14 +18241,14 @@ - - - if test "x$msg_polkit" != "xyes"; then -- as_fn_error "PolicyKit not explicitly disabled and no PolicyKit found" "$LINENO" 5 -+ as_fn_error $? "PolicyKit not explicitly disabled and no PolicyKit found" "$LINENO" 5 - fi - - # Extract the first word of "polkit-policy-file-validate", so it can be a program name with args. - set dummy polkit-policy-file-validate; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_POLKIT_POLICY_FILE_VALIDATE+set}" = set; then : -+if ${ac_cv_prog_POLKIT_POLICY_FILE_VALIDATE+:} false; then : - $as_echo_n "(cached) " >&6 - else - if test -n "$POLKIT_POLICY_FILE_VALIDATE"; then -@@ -17585,7 +18282,7 @@ - - - if test -z "$POLKIT_POLICY_FILE_VALIDATE"; then -- as_fn_error "polkit-policy-file-validate not found" "$LINENO" 5 -+ as_fn_error $? "polkit-policy-file-validate not found" "$LINENO" 5 - fi - fi - -@@ -17608,7 +18305,7 @@ - msg_aclmgmt=no - if test "x$enable_acl_management" != "xno"; then - if test "x$enable_policy_kit" = "xno"; then -- as_fn_error "ACL management support requires building with PolicyKit support" "$LINENO" 5 -+ as_fn_error $? "ACL management support requires building with PolicyKit support" "$LINENO" 5 - fi - if true; then - HAVE_ACLMGMT_TRUE= -@@ -17758,46 +18455,46 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DBUS" >&5 - $as_echo_n "checking for DBUS... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$DBUS_CFLAGS"; then -- pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$DBUS_CFLAGS"; then -+ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$dbus_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$dbus_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "$dbus_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$DBUS_LIBS"; then -- pkg_cv_DBUS_LIBS="$DBUS_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$DBUS_LIBS"; then -+ pkg_cv_DBUS_LIBS="$DBUS_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$dbus_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$dbus_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "$dbus_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -17805,14 +18502,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$dbus_module"` -+ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$dbus_module" 2>&1` - else -- DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$dbus_module"` -+ DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$dbus_module" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$DBUS_PKG_ERRORS" >&5 - -- as_fn_error "Package requirements ($dbus_module) were not met: -+ as_fn_error $? "Package requirements ($dbus_module) were not met: - - $DBUS_PKG_ERRORS - -@@ -17821,12 +18518,13 @@ - - Alternatively, you may set the environment variables DBUS_CFLAGS - and DBUS_LIBS to avoid the need to call pkg-config. --See the pkg-config man page for more details. --" "$LINENO" 5 -+See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "The pkg-config script could not be found or is too old. Make sure it -+as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - -@@ -17835,13 +18533,13 @@ - See the pkg-config man page for more details. - - To get pkg-config, see <http://pkg-config.freedesktop.org/>. --See \`config.log' for more details." "$LINENO" 5; } -+See \`config.log' for more details" "$LINENO" 5; } - else - DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS - DBUS_LIBS=$pkg_cv_DBUS_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 - $as_echo "yes" >&6; } -- : -+ - fi - - -@@ -17852,46 +18550,46 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5 - $as_echo_n "checking for GLIB... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$GLIB_CFLAGS"; then -- pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$GLIB_CFLAGS"; then -+ pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$glib_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$glib_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "$glib_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$GLIB_LIBS"; then -- pkg_cv_GLIB_LIBS="$GLIB_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$GLIB_LIBS"; then -+ pkg_cv_GLIB_LIBS="$GLIB_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$glib_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$glib_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "$glib_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -17899,14 +18597,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$glib_module"` -+ GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$glib_module" 2>&1` - else -- GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$glib_module"` -+ GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$glib_module" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GLIB_PKG_ERRORS" >&5 - -- as_fn_error "Package requirements ($glib_module) were not met: -+ as_fn_error $? "Package requirements ($glib_module) were not met: - - $GLIB_PKG_ERRORS - -@@ -17915,12 +18613,13 @@ - - Alternatively, you may set the environment variables GLIB_CFLAGS - and GLIB_LIBS to avoid the need to call pkg-config. --See the pkg-config man page for more details. --" "$LINENO" 5 -+See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "The pkg-config script could not be found or is too old. Make sure it -+as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - -@@ -17929,13 +18628,13 @@ - See the pkg-config man page for more details. - - To get pkg-config, see <http://pkg-config.freedesktop.org/>. --See \`config.log' for more details." "$LINENO" 5; } -+See \`config.log' for more details" "$LINENO" 5; } - else - GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS - GLIB_LIBS=$pkg_cv_GLIB_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 - $as_echo "yes" >&6; } -- : -+ - fi - - -@@ -17960,46 +18659,46 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for VOLUME_ID" >&5 - $as_echo_n "checking for VOLUME_ID... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$VOLUME_ID_CFLAGS"; then -- pkg_cv_VOLUME_ID_CFLAGS="$VOLUME_ID_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$VOLUME_ID_CFLAGS"; then -+ pkg_cv_VOLUME_ID_CFLAGS="$VOLUME_ID_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$volume_id_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$volume_id_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_VOLUME_ID_CFLAGS=`$PKG_CONFIG --cflags "$volume_id_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$VOLUME_ID_LIBS"; then -- pkg_cv_VOLUME_ID_LIBS="$VOLUME_ID_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$VOLUME_ID_LIBS"; then -+ pkg_cv_VOLUME_ID_LIBS="$VOLUME_ID_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$volume_id_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$volume_id_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_VOLUME_ID_LIBS=`$PKG_CONFIG --libs "$volume_id_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -18007,14 +18706,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- VOLUME_ID_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$volume_id_module"` -+ VOLUME_ID_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$volume_id_module" 2>&1` - else -- VOLUME_ID_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$volume_id_module"` -+ VOLUME_ID_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$volume_id_module" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$VOLUME_ID_PKG_ERRORS" >&5 - -- as_fn_error "Package requirements ($volume_id_module) were not met: -+ as_fn_error $? "Package requirements ($volume_id_module) were not met: - - $VOLUME_ID_PKG_ERRORS - -@@ -18023,12 +18722,13 @@ - - Alternatively, you may set the environment variables VOLUME_ID_CFLAGS - and VOLUME_ID_LIBS to avoid the need to call pkg-config. --See the pkg-config man page for more details. --" "$LINENO" 5 -+See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "The pkg-config script could not be found or is too old. Make sure it -+as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - -@@ -18037,13 +18737,13 @@ - See the pkg-config man page for more details. - - To get pkg-config, see <http://pkg-config.freedesktop.org/>. --See \`config.log' for more details." "$LINENO" 5; } -+See \`config.log' for more details" "$LINENO" 5; } - else - VOLUME_ID_CFLAGS=$pkg_cv_VOLUME_ID_CFLAGS - VOLUME_ID_LIBS=$pkg_cv_VOLUME_ID_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 - $as_echo "yes" >&6; } -- : -+ - fi - - -@@ -18064,46 +18764,46 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BLKID" >&5 - $as_echo_n "checking for BLKID... " >&6; } - --if test -n "$PKG_CONFIG"; then -- if test -n "$BLKID_CFLAGS"; then -- pkg_cv_BLKID_CFLAGS="$BLKID_CFLAGS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$BLKID_CFLAGS"; then -+ pkg_cv_BLKID_CFLAGS="$BLKID_CFLAGS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$blkid_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$blkid_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_BLKID_CFLAGS=`$PKG_CONFIG --cflags "$blkid_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi --if test -n "$PKG_CONFIG"; then -- if test -n "$BLKID_LIBS"; then -- pkg_cv_BLKID_LIBS="$BLKID_LIBS" -- else -- if test -n "$PKG_CONFIG" && \ -+if test -n "$BLKID_LIBS"; then -+ pkg_cv_BLKID_LIBS="$BLKID_LIBS" -+ elif test -n "$PKG_CONFIG"; then -+ if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$blkid_module\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$blkid_module") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_BLKID_LIBS=`$PKG_CONFIG --libs "$blkid_module" 2>/dev/null` -+ test "x$?" != "x0" && pkg_failed=yes - else - pkg_failed=yes - fi -- fi --else -- pkg_failed=untried -+ else -+ pkg_failed=untried - fi - - - - if test $pkg_failed = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - - if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -@@ -18111,14 +18811,14 @@ - _pkg_short_errors_supported=no - fi - if test $_pkg_short_errors_supported = yes; then -- BLKID_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$blkid_module"` -+ BLKID_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$blkid_module" 2>&1` - else -- BLKID_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$blkid_module"` -+ BLKID_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$blkid_module" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$BLKID_PKG_ERRORS" >&5 - -- as_fn_error "Package requirements ($blkid_module) were not met: -+ as_fn_error $? "Package requirements ($blkid_module) were not met: - - $BLKID_PKG_ERRORS - -@@ -18127,12 +18827,13 @@ - - Alternatively, you may set the environment variables BLKID_CFLAGS - and BLKID_LIBS to avoid the need to call pkg-config. --See the pkg-config man page for more details. --" "$LINENO" 5 -+See the pkg-config man page for more details." "$LINENO" 5 - elif test $pkg_failed = untried; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 - $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error "The pkg-config script could not be found or is too old. Make sure it -+as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it - is in your PATH or set the PKG_CONFIG environment variable to the full - path to pkg-config. - -@@ -18141,13 +18842,13 @@ - See the pkg-config man page for more details. - - To get pkg-config, see <http://pkg-config.freedesktop.org/>. --See \`config.log' for more details." "$LINENO" 5; } -+See \`config.log' for more details" "$LINENO" 5; } - else - BLKID_CFLAGS=$pkg_cv_BLKID_CFLAGS - BLKID_LIBS=$pkg_cv_BLKID_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 - $as_echo "yes" >&6; } -- : -+ - fi - - -@@ -18164,7 +18865,7 @@ - # Check for BLKGETSIZE64 - ac_fn_c_check_type "$LINENO" "pgoff_t" "ac_cv_type_pgoff_t" "/usr/include/sys/types.h - " --if test "x$ac_cv_type_pgoff_t" = x""yes; then : -+if test "x$ac_cv_type_pgoff_t" = xyes; then : - - else - -@@ -18193,7 +18894,7 @@ - if test x$have_size64 = xno; then - case "$host" in - *-*-linux*) -- as_fn_error "BLKGETSIZE64 is not defined" "$LINENO" 5 -+ as_fn_error $? "BLKGETSIZE64 is not defined" "$LINENO" 5 - ;; - *) - ;; -@@ -18203,7 +18904,7 @@ - for ac_func in getgrouplist - do : - ac_fn_c_check_func "$LINENO" "getgrouplist" "ac_cv_func_getgrouplist" --if test "x$ac_cv_func_getgrouplist" = x""yes; then : -+if test "x$ac_cv_func_getgrouplist" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_GETGROUPLIST 1 - _ACEOF -@@ -18214,7 +18915,7 @@ - for ac_func in asprintf - do : - ac_fn_c_check_func "$LINENO" "asprintf" "ac_cv_func_asprintf" --if test "x$ac_cv_func_asprintf" = x""yes; then : -+if test "x$ac_cv_func_asprintf" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_ASPRINTF 1 - _ACEOF -@@ -18225,7 +18926,7 @@ - for ac_func in mallopt - do : - ac_fn_c_check_func "$LINENO" "mallopt" "ac_cv_func_mallopt" --if test "x$ac_cv_func_mallopt" = x""yes; then : -+if test "x$ac_cv_func_mallopt" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_MALLOPT 1 - _ACEOF -@@ -18236,7 +18937,7 @@ - for ac_func in strndup - do : - ac_fn_c_check_func "$LINENO" "strndup" "ac_cv_func_strndup" --if test "x$ac_cv_func_strndup" = x""yes; then : -+if test "x$ac_cv_func_strndup" = xyes; then : - cat >>confdefs.h <<_ACEOF - #define HAVE_STRNDUP 1 - _ACEOF -@@ -18251,7 +18952,7 @@ - set dummy xmlto; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_XMLTO+set}" = set; then : -+if ${ac_cv_path_XMLTO+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $XMLTO in -@@ -18301,7 +19002,7 @@ - set dummy xmllint; ac_word=$2 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 - $as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_path_XMLLINT+set}" = set; then : -+if ${ac_cv_path_XMLLINT+:} false; then : - $as_echo_n "(cached) " >&6 - else - case $XMLLINT in -@@ -18355,10 +19056,10 @@ - - if test x$enable_docbook_docs = xyes; then - if test x$have_xmlto = xno; then -- as_fn_error "Building DocBook docs explicitly required, but xmlto not found" "$LINENO" 5 -+ as_fn_error $? "Building DocBook docs explicitly required, but xmlto not found" "$LINENO" 5 - fi - if test x$ve_xmllint = xno; then -- as_fn_error "Building DocBook docs explicitly required, but xmllint not found" "$LINENO" 5 -+ as_fn_error $? "Building DocBook docs explicitly required, but xmllint not found" "$LINENO" 5 - fi - fi - -@@ -18671,7 +19372,7 @@ - enableval=$enable_sonypic; case "${enableval}" in - yes) ENABLE_SONYPIC=yes ;; - no) ENABLE_SONYPIC=no ;; -- *) as_fn_error "bad value ${enableval} for --enable-sonypic" "$LINENO" 5 ;; -+ *) as_fn_error $? "bad value ${enableval} for --enable-sonypic" "$LINENO" 5 ;; - esac - - else -@@ -18699,7 +19400,7 @@ - $as_echo "$have_sonypic" >&6; } - - if test "x$ENABLE_SONYPIC" = "xyes" && test "x$have_sonypic" != "xyes" ; then -- as_fn_error "Sony PIC support explicitly requested but no support found" "$LINENO" 5 -+ as_fn_error $? "Sony PIC support explicitly requested but no support found" "$LINENO" 5 - fi - fi - if test x"$have_sonypic" = "xyes" ; then -@@ -18806,10 +19507,21 @@ - :end' >>confcache - if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then -- test "x$cache_file" != "x/dev/null" && -+ if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 - $as_echo "$as_me: updating cache $cache_file" >&6;} -- cat confcache >$cache_file -+ if test ! -f "$cache_file" || test -h "$cache_file"; then -+ cat confcache >"$cache_file" -+ else -+ case $cache_file in #( -+ */* | ?:*) -+ mv -f confcache "$cache_file"$$ && -+ mv -f "$cache_file"$$ "$cache_file" ;; #( -+ *) -+ mv -f confcache "$cache_file" ;; -+ esac -+ fi -+ fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 - $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} -@@ -18825,6 +19537,7 @@ - - ac_libobjs= - ac_ltlibobjs= -+U= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -@@ -18848,223 +19561,219 @@ - fi - - if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then -- as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. -+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then -- as_fn_error "conditional \"AMDEP\" was never defined. -+ as_fn_error $? "conditional \"AMDEP\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then -- as_fn_error "conditional \"am__fastdepCC\" was never defined. -+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then -- as_fn_error "conditional \"am__fastdepCC\" was never defined. --Usually this means the macro was only invoked conditionally." "$LINENO" 5 --fi --if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then -- as_fn_error "conditional \"am__fastdepCXX\" was never defined. -+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then -- as_fn_error "conditional \"am__fastdepCXX\" was never defined. -+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${MAN_PAGES_ENABLED_TRUE}" && test -z "${MAN_PAGES_ENABLED_FALSE}"; then -- as_fn_error "conditional \"MAN_PAGES_ENABLED\" was never defined. -+ as_fn_error $? "conditional \"MAN_PAGES_ENABLED\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then -- as_fn_error "conditional \"ENABLE_GTK_DOC\" was never defined. -+ as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then -- as_fn_error "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. -+ as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${ACPI_ACPID_TRUE}" && test -z "${ACPI_ACPID_FALSE}"; then -- as_fn_error "conditional \"ACPI_ACPID\" was never defined. -+ as_fn_error $? "conditional \"ACPI_ACPID\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${ACPI_PROC_TRUE}" && test -z "${ACPI_PROC_FALSE}"; then -- as_fn_error "conditional \"ACPI_PROC\" was never defined. -+ as_fn_error $? "conditional \"ACPI_PROC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_ACPI_IBM_TRUE}" && test -z "${BUILD_ACPI_IBM_FALSE}"; then -- as_fn_error "conditional \"BUILD_ACPI_IBM\" was never defined. -+ as_fn_error $? "conditional \"BUILD_ACPI_IBM\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_ACPI_TOSHIBA_TRUE}" && test -z "${BUILD_ACPI_TOSHIBA_FALSE}"; then -- as_fn_error "conditional \"BUILD_ACPI_TOSHIBA\" was never defined. -+ as_fn_error $? "conditional \"BUILD_ACPI_TOSHIBA\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${USE_PARTED_TRUE}" && test -z "${USE_PARTED_FALSE}"; then -- as_fn_error "conditional \"USE_PARTED\" was never defined. -+ as_fn_error $? "conditional \"USE_PARTED\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${GCOV_TRUE}" && test -z "${GCOV_FALSE}"; then -- as_fn_error "conditional \"GCOV\" was never defined. -+ as_fn_error $? "conditional \"GCOV\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_LIBUSB_TRUE}" && test -z "${HAVE_LIBUSB_FALSE}"; then -- as_fn_error "conditional \"HAVE_LIBUSB\" was never defined. -+ as_fn_error $? "conditional \"HAVE_LIBUSB\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_SMBIOS_TRUE}" && test -z "${HAVE_SMBIOS_FALSE}"; then -- as_fn_error "conditional \"HAVE_SMBIOS\" was never defined. -+ as_fn_error $? "conditional \"HAVE_SMBIOS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_SMBIOS_TRUE}" && test -z "${HAVE_SMBIOS_FALSE}"; then -- as_fn_error "conditional \"HAVE_SMBIOS\" was never defined. -+ as_fn_error $? "conditional \"HAVE_SMBIOS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_SMBIOS_TRUE}" && test -z "${HAVE_SMBIOS_FALSE}"; then -- as_fn_error "conditional \"HAVE_SMBIOS\" was never defined. -+ as_fn_error $? "conditional \"HAVE_SMBIOS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_SMBIOS_TRUE}" && test -z "${HAVE_SMBIOS_FALSE}"; then -- as_fn_error "conditional \"HAVE_SMBIOS\" was never defined. -+ as_fn_error $? "conditional \"HAVE_SMBIOS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_LIBPCI_TRUE}" && test -z "${HAVE_LIBPCI_FALSE}"; then -- as_fn_error "conditional \"HAVE_LIBPCI\" was never defined. -+ as_fn_error $? "conditional \"HAVE_LIBPCI\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HALD_COMPILE_DUMMY_TRUE}" && test -z "${HALD_COMPILE_DUMMY_FALSE}"; then -- as_fn_error "conditional \"HALD_COMPILE_DUMMY\" was never defined. -+ as_fn_error $? "conditional \"HALD_COMPILE_DUMMY\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HALD_COMPILE_LINUX_TRUE}" && test -z "${HALD_COMPILE_LINUX_FALSE}"; then -- as_fn_error "conditional \"HALD_COMPILE_LINUX\" was never defined. -+ as_fn_error $? "conditional \"HALD_COMPILE_LINUX\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HALD_COMPILE_FREEBSD_TRUE}" && test -z "${HALD_COMPILE_FREEBSD_FALSE}"; then -- as_fn_error "conditional \"HALD_COMPILE_FREEBSD\" was never defined. -+ as_fn_error $? "conditional \"HALD_COMPILE_FREEBSD\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HALD_COMPILE_SOLARIS_TRUE}" && test -z "${HALD_COMPILE_SOLARIS_FALSE}"; then -- as_fn_error "conditional \"HALD_COMPILE_SOLARIS\" was never defined. -+ as_fn_error $? "conditional \"HALD_COMPILE_SOLARIS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_LIBUSB20_TRUE}" && test -z "${HAVE_LIBUSB20_FALSE}"; then -- as_fn_error "conditional \"HAVE_LIBUSB20\" was never defined. -+ as_fn_error $? "conditional \"HAVE_LIBUSB20\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_LIBUSB20_TRUE}" && test -z "${HAVE_LIBUSB20_FALSE}"; then -- as_fn_error "conditional \"HAVE_LIBUSB20\" was never defined. -+ as_fn_error $? "conditional \"HAVE_LIBUSB20\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_CONKIT_TRUE}" && test -z "${HAVE_CONKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_CONKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_CONKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_CONKIT_TRUE}" && test -z "${HAVE_CONKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_CONKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_CONKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_GPERF_TRUE}" && test -z "${HAVE_GPERF_FALSE}"; then -- as_fn_error "conditional \"HAVE_GPERF\" was never defined. -+ as_fn_error $? "conditional \"HAVE_GPERF\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_KEYMAPS_TRUE}" && test -z "${BUILD_KEYMAPS_FALSE}"; then -- as_fn_error "conditional \"BUILD_KEYMAPS\" was never defined. -+ as_fn_error $? "conditional \"BUILD_KEYMAPS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_POLKIT_TRUE}" && test -z "${HAVE_POLKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_POLKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_POLKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_POLKIT_TRUE}" && test -z "${HAVE_POLKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_POLKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_POLKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_POLKIT_TRUE}" && test -z "${HAVE_POLKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_POLKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_POLKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_POLKIT_TRUE}" && test -z "${HAVE_POLKIT_FALSE}"; then -- as_fn_error "conditional \"HAVE_POLKIT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_POLKIT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_ACLMGMT_TRUE}" && test -z "${HAVE_ACLMGMT_FALSE}"; then -- as_fn_error "conditional \"HAVE_ACLMGMT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_ACLMGMT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_ACLMGMT_TRUE}" && test -z "${HAVE_ACLMGMT_FALSE}"; then -- as_fn_error "conditional \"HAVE_ACLMGMT\" was never defined. -+ as_fn_error $? "conditional \"HAVE_ACLMGMT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_UMOUNT_HAL_TRUE}" && test -z "${HAVE_UMOUNT_HAL_FALSE}"; then -- as_fn_error "conditional \"HAVE_UMOUNT_HAL\" was never defined. -+ as_fn_error $? "conditional \"HAVE_UMOUNT_HAL\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_UMOUNT_HAL_TRUE}" && test -z "${HAVE_UMOUNT_HAL_FALSE}"; then -- as_fn_error "conditional \"HAVE_UMOUNT_HAL\" was never defined. -+ as_fn_error $? "conditional \"HAVE_UMOUNT_HAL\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_ACPI_TRUE}" && test -z "${HAVE_ACPI_FALSE}"; then -- as_fn_error "conditional \"HAVE_ACPI\" was never defined. -+ as_fn_error $? "conditional \"HAVE_ACPI\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_APM_TRUE}" && test -z "${HAVE_APM_FALSE}"; then -- as_fn_error "conditional \"HAVE_APM\" was never defined. -+ as_fn_error $? "conditional \"HAVE_APM\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_PMU_TRUE}" && test -z "${HAVE_PMU_FALSE}"; then -- as_fn_error "conditional \"HAVE_PMU\" was never defined. -+ as_fn_error $? "conditional \"HAVE_PMU\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_DEPRECATED_KEYS_TRUE}" && test -z "${BUILD_DEPRECATED_KEYS_FALSE}"; then -- as_fn_error "conditional \"BUILD_DEPRECATED_KEYS\" was never defined. -+ as_fn_error $? "conditional \"BUILD_DEPRECATED_KEYS\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then -- as_fn_error "conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. -+ as_fn_error $? "conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${OS_TYPE_UNKNOWN_TRUE}" && test -z "${OS_TYPE_UNKNOWN_FALSE}"; then -- as_fn_error "conditional \"OS_TYPE_UNKNOWN\" was never defined. -+ as_fn_error $? "conditional \"OS_TYPE_UNKNOWN\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${OS_TYPE_RED_HAT_TRUE}" && test -z "${OS_TYPE_RED_HAT_FALSE}"; then -- as_fn_error "conditional \"OS_TYPE_RED_HAT\" was never defined. -+ as_fn_error $? "conditional \"OS_TYPE_RED_HAT\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_MACBOOKPRO_TRUE}" && test -z "${BUILD_MACBOOKPRO_FALSE}"; then -- as_fn_error "conditional \"BUILD_MACBOOKPRO\" was never defined. -+ as_fn_error $? "conditional \"BUILD_MACBOOKPRO\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_MACBOOK_TRUE}" && test -z "${BUILD_MACBOOK_FALSE}"; then -- as_fn_error "conditional \"BUILD_MACBOOK\" was never defined. -+ as_fn_error $? "conditional \"BUILD_MACBOOK\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_IMAC_TRUE}" && test -z "${BUILD_IMAC_FALSE}"; then -- as_fn_error "conditional \"BUILD_IMAC\" was never defined. -+ as_fn_error $? "conditional \"BUILD_IMAC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_OMAP_TRUE}" && test -z "${BUILD_OMAP_FALSE}"; then -- as_fn_error "conditional \"BUILD_OMAP\" was never defined. -+ as_fn_error $? "conditional \"BUILD_OMAP\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_CPUFREQ_TRUE}" && test -z "${BUILD_CPUFREQ_FALSE}"; then -- as_fn_error "conditional \"BUILD_CPUFREQ\" was never defined. -+ as_fn_error $? "conditional \"BUILD_CPUFREQ\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_USBCSR_TRUE}" && test -z "${BUILD_USBCSR_FALSE}"; then -- as_fn_error "conditional \"BUILD_USBCSR\" was never defined. -+ as_fn_error $? "conditional \"BUILD_USBCSR\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${BUILD_DELL_TRUE}" && test -z "${BUILD_DELL_FALSE}"; then -- as_fn_error "conditional \"BUILD_DELL\" was never defined. -+ as_fn_error $? "conditional \"BUILD_DELL\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - if test -z "${HAVE_SONYPIC_TRUE}" && test -z "${HAVE_SONYPIC_FALSE}"; then -- as_fn_error "conditional \"HAVE_SONYPIC\" was never defined. -+ as_fn_error $? "conditional \"HAVE_SONYPIC\" was never defined. - Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi - --: ${CONFIG_STATUS=./config.status} -+: "${CONFIG_STATUS=./config.status}" - ac_write_fail=0 - ac_clean_files_save=$ac_clean_files - ac_clean_files="$ac_clean_files $CONFIG_STATUS" -@@ -19165,6 +19874,7 @@ - IFS=" "" $as_nl" - - # Find who we are. Look in the path if we contain no directory separator. -+as_myself= - case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -@@ -19210,19 +19920,19 @@ - (unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - --# as_fn_error ERROR [LINENO LOG_FD] --# --------------------------------- -+# as_fn_error STATUS ERROR [LINENO LOG_FD] -+# ---------------------------------------- - # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are - # provided, also output the error to LOG_FD, referencing LINENO. Then exit the --# script with status $?, using 1 if that was 0. -+# script with STATUS, using 1 if that was 0. - as_fn_error () - { -- as_status=$?; test $as_status -eq 0 && as_status=1 -- if test "$3"; then -- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 -+ as_status=$1; test $as_status -eq 0 && as_status=1 -+ if test "$4"; then -+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi -- $as_echo "$as_me: error: $1" >&2 -+ $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status - } # as_fn_error - -@@ -19418,7 +20128,7 @@ - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" -- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" -+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - - } # as_fn_mkdir_p -@@ -19472,7 +20182,7 @@ - # values after options handling. - ac_log=" - This file was extended by hal $as_me 0.5.14, which was --generated by GNU Autoconf 2.64. Invocation command line was -+generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS -@@ -19512,6 +20222,7 @@ - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit -+ --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files -@@ -19534,12 +20245,13 @@ - - _ACEOF - cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" - ac_cs_version="\\ - hal config.status 0.5.14 --configured by $0, generated by GNU Autoconf 2.64, -- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -+configured by $0, generated by GNU Autoconf 2.68, -+ with options \\"\$ac_cs_config\\" - --Copyright (C) 2009 Free Software Foundation, Inc. -+Copyright (C) 2010 Free Software Foundation, Inc. - This config.status script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it." - -@@ -19557,11 +20269,16 @@ - while test $# != 0 - do - case $1 in -- --*=*) -+ --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; -+ --*=) -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg= -+ ac_shift=: -+ ;; - *) - ac_option=$1 - ac_optarg=$2 -@@ -19575,12 +20292,15 @@ - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; -+ --config | --confi | --conf | --con | --co | --c ) -+ $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; -@@ -19593,7 +20313,7 @@ - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header -- as_fn_error "ambiguous option: \`$1' -+ as_fn_error $? "ambiguous option: \`$1' - Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; -@@ -19602,7 +20322,7 @@ - ac_cs_silent=: ;; - - # This is an error. -- -*) as_fn_error "unrecognized option: \`$1' -+ -*) as_fn_error $? "unrecognized option: \`$1' - Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" -@@ -19656,184 +20376,208 @@ - sed_quote_subst='$sed_quote_subst' - double_quote_subst='$double_quote_subst' - delay_variable_subst='$delay_variable_subst' --macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' --macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' --enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' --enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' --pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' --enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' --host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' --host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' --host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' --build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' --build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' --build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' --SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' --Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' --GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' --EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' --FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' --LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' --NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' --LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' --max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' --ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' --exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' --lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' --lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' --lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' --reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' --reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' --OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' --deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' --file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' --AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' --AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' --STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' --RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' --old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' --old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' --CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' --CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' --compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' --GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' --objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' --SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' --ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' --MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' --need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' --DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' --NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' --LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' --OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' --OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' --libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' --shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' --extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' --archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' --enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' --export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' --whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' --compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' --archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' --archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' --module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' --module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' --with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' --allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' --no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' --inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' --link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' --fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' --always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' --export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' --exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' --include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' --prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' --file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' --variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' --need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' --need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' --version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' --runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' --shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' --shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' --libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' --library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' --soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' --postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' --postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' --finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' --finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' --sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' --sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' --enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' --enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' --enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' --old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' --striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' --compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' --predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' --postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' --predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' --postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' --compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' --LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' --GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' --lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' --lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' --archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' --enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' --export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' --whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' --compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' --allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' --no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' --inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' --link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' --fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' --always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' --export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' --include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' --prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' --file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' --hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' --compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' --predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' --postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' --predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' --postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' --compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' -+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' -+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' -+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' -+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' -+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' -+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' -+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' -+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' -+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' -+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' -+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' -+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' -+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' -+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' -+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' -+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' -+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' -+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' -+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' -+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' -+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' -+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' -+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' -+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' -+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' -+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' -+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' -+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' - - LTCC='$LTCC' - LTCFLAGS='$LTCFLAGS' - compiler='$compiler_DEFAULT' - -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+\$1 -+_LTECHO_EOF' -+} -+ - # Quote evaled strings. --for var in SED \ -+for var in SHELL \ -+ECHO \ -+PATH_SEPARATOR \ -+SED \ - GREP \ - EGREP \ - FGREP \ -@@ -19846,8 +20590,13 @@ - OBJDUMP \ - deplibs_check_method \ - file_magic_cmd \ -+file_magic_glob \ -+want_nocaseglob \ -+DLLTOOL \ -+sharedlib_from_linklib_cmd \ - AR \ - AR_FLAGS \ -+archiver_list_spec \ - STRIP \ - RANLIB \ - CC \ -@@ -19857,14 +20606,14 @@ - lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ --SHELL \ --ECHO \ -+nm_file_list_spec \ - lt_prog_compiler_no_builtin_flag \ --lt_prog_compiler_wl \ - lt_prog_compiler_pic \ -+lt_prog_compiler_wl \ - lt_prog_compiler_static \ - lt_cv_prog_compiler_c_o \ - need_locks \ -+MANIFEST_TOOL \ - DSYMUTIL \ - NMEDIT \ - LIPO \ -@@ -19878,9 +20627,7 @@ - allow_undefined_flag \ - no_undefined_flag \ - hardcode_libdir_flag_spec \ --hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ --fix_srcfile_path \ - exclude_expsyms \ - include_expsyms \ - file_list_spec \ -@@ -19888,6 +20635,7 @@ - libname_spec \ - library_names_spec \ - soname_spec \ -+install_override_mode \ - finish_eval \ - old_striplib \ - striplib \ -@@ -19898,10 +20646,11 @@ - postdeps \ - compiler_lib_search_path \ - LD_CXX \ -+reload_flag_CXX \ - compiler_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ --lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ -+lt_prog_compiler_wl_CXX \ - lt_prog_compiler_static_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - export_dynamic_flag_spec_CXX \ -@@ -19911,9 +20660,7 @@ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - hardcode_libdir_flag_spec_CXX \ --hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ --fix_srcfile_path_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX \ - file_list_spec_CXX \ -@@ -19923,9 +20670,9 @@ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX; do -- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) -- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -@@ -19947,11 +20694,13 @@ - module_expsym_cmds \ - export_symbols_cmds \ - prelink_cmds \ -+postlink_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - finish_cmds \ - sys_lib_search_path_spec \ - sys_lib_dlsearch_path_spec \ -+reload_cmds_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ -@@ -19960,10 +20709,11 @@ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - export_symbols_cmds_CXX \ --prelink_cmds_CXX; do -- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+prelink_cmds_CXX \ -+postlink_cmds_CXX; do -+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) -- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -@@ -19971,12 +20721,6 @@ - esac - done - --# Fix-up fallback echo if it was mangled by the above quoting rules. --case \$lt_ECHO in --*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` -- ;; --esac -- - ac_aux_dir='$ac_aux_dir' - xsi_shell='$xsi_shell' - lt_shell_append='$lt_shell_append' -@@ -20054,7 +20798,7 @@ - "doc/spec/hal-spec.xml.in") CONFIG_FILES="$CONFIG_FILES doc/spec/hal-spec.xml.in" ;; - "doc/man/Makefile") CONFIG_FILES="$CONFIG_FILES doc/man/Makefile" ;; - -- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; -+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac - done - -@@ -20077,9 +20821,10 @@ - # after its creation but before its name has been assigned to `$tmp'. - $debug || - { -- tmp= -+ tmp= ac_tmp= - trap 'exit_status=$? -- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+ : "${ac_tmp:=$tmp}" -+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status - ' 0 - trap 'as_fn_exit 1' 1 2 13 15 - } -@@ -20087,12 +20832,13 @@ - - { - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && -- test -n "$tmp" && test -d "$tmp" -+ test -d "$tmp" - } || - { - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") --} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 -+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -+ac_tmp=$tmp - - # Set up the scripts for CONFIG_FILES section. - # No need to generate them if there are no CONFIG_FILES. -@@ -20109,12 +20855,12 @@ - fi - ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` - if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then -- ac_cs_awk_cr='\r' -+ ac_cs_awk_cr='\\r' - else - ac_cs_awk_cr=$ac_cr - fi - --echo 'BEGIN {' >"$tmp/subs1.awk" && -+echo 'BEGIN {' >"$ac_tmp/subs1.awk" && - _ACEOF - - -@@ -20123,18 +20869,18 @@ - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" - } >conf$$subs.sh || -- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 --ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` - ac_delim='%!_!# ' - for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || -- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then -- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -@@ -20142,7 +20888,7 @@ - rm -f conf$$subs.sh - - cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 --cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && - _ACEOF - sed -n ' - h -@@ -20156,7 +20902,7 @@ - t delim - :nl - h --s/\(.\{148\}\).*/\1/ -+s/\(.\{148\}\)..*/\1/ - t more1 - s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ - p -@@ -20170,7 +20916,7 @@ - t nl - :delim - h --s/\(.\{148\}\).*/\1/ -+s/\(.\{148\}\)..*/\1/ - t more2 - s/["\\]/\\&/g; s/^/"/; s/$/"/ - p -@@ -20190,7 +20936,7 @@ - rm -f conf$$subs.awk - cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - _ACAWK --cat >>"\$tmp/subs1.awk" <<_ACAWK && -+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -@@ -20222,21 +20968,29 @@ - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" - else - cat --fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ -- || as_fn_error "could not setup config files machinery" "$LINENO" 5 -+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ -+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 - _ACEOF - --# VPATH may cause trouble with some makes, so we remove $(srcdir), --# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and - # trailing colons and then remove the whole line if VPATH becomes empty - # (actually we leave an empty line to preserve line numbers). - if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=/{ --s/:*\$(srcdir):*/:/ --s/:*\${srcdir}:*/:/ --s/:*@srcdir@:*/:/ --s/^\([^=]*=[ ]*\):*/\1/ -+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -+h -+s/// -+s/^/:/ -+s/[ ]*$/:/ -+s/:\$(srcdir):/:/g -+s/:\${srcdir}:/:/g -+s/:@srcdir@:/:/g -+s/^:*// - s/:*$// -+x -+s/\(=[ ]*\).*/\1/ -+G -+s/\n// - s/^[^=]*=[ ]*$// - }' - fi -@@ -20248,7 +21002,7 @@ - # No need to generate them if there are no CONFIG_HEADERS. - # This happens for instance with `./config.status Makefile'. - if test -n "$CONFIG_HEADERS"; then --cat >"$tmp/defines.awk" <<\_ACAWK || -+cat >"$ac_tmp/defines.awk" <<\_ACAWK || - BEGIN { - _ACEOF - -@@ -20260,11 +21014,11 @@ - # handling of long lines. - ac_delim='%!_!# ' - for ac_last_try in false false :; do -- ac_t=`sed -n "/$ac_delim/p" confdefs.h` -- if test -z "$ac_t"; then -+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h` -+ if test -z "$ac_tt"; then - break - elif $ac_last_try; then -- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 -+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -@@ -20349,7 +21103,7 @@ - _ACAWK - _ACEOF - cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -- as_fn_error "could not setup config headers machinery" "$LINENO" 5 -+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 - fi # test -n "$CONFIG_HEADERS" - - -@@ -20362,7 +21116,7 @@ - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; -- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; -+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac -@@ -20381,7 +21135,7 @@ - for ac_f - do - case $ac_f in -- -) ac_f="$tmp/stdin";; -+ -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. -@@ -20390,7 +21144,7 @@ - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || -- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; -+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" -@@ -20416,8 +21170,8 @@ - esac - - case $ac_tag in -- *:-:* | *:-) cat >"$tmp/stdin" \ -- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; -+ *:-:* | *:-) cat >"$ac_tmp/stdin" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac -@@ -20553,23 +21307,24 @@ - s&@MKDIR_P@&$ac_MKDIR_P&;t t - $ac_datarootdir_hack - " --eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ -- || as_fn_error "could not create $ac_file" "$LINENO" 5 -+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ -+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - - test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ -+ "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' --which seems to be undefined. Please make sure it is defined." >&5 -+which seems to be undefined. Please make sure it is defined" >&5 - $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' --which seems to be undefined. Please make sure it is defined." >&2;} -+which seems to be undefined. Please make sure it is defined" >&2;} - -- rm -f "$tmp/stdin" -+ rm -f "$ac_tmp/stdin" - case $ac_file in -- -) cat "$tmp/out" && rm -f "$tmp/out";; -- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; -+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; -+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ -- || as_fn_error "could not create $ac_file" "$LINENO" 5 -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # -@@ -20578,21 +21333,21 @@ - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ -- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" -- } >"$tmp/config.h" \ -- || as_fn_error "could not create $ac_file" "$LINENO" 5 -- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then -+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" -+ } >"$ac_tmp/config.h" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 - $as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" -- mv "$tmp/config.h" "$ac_file" \ -- || as_fn_error "could not create $ac_file" "$LINENO" 5 -+ mv "$ac_tmp/config.h" "$ac_file" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ -- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ -- || as_fn_error "could not create -" "$LINENO" 5 -+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ -+ || as_fn_error $? "could not create -" "$LINENO" 5 - fi - # Compute "$ac_file"'s index in $config_headers. - _am_arg="$ac_file" -@@ -20753,7 +21508,8 @@ - # NOTE: Changes made to this file will be lost: look at ltmain.sh. - # - # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, --# 2006, 2007, 2008 Free Software Foundation, Inc. -+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -+# Foundation, Inc. - # Written by Gordon Matzigkeit, 1996 - # - # This file is part of GNU Libtool. -@@ -20801,6 +21557,15 @@ - # Whether or not to optimize for fast installation. - fast_install=$enable_fast_install - -+# Shell to use when invoking shell scripts. -+SHELL=$lt_SHELL -+ -+# An echo program that protects backslashes. -+ECHO=$lt_ECHO -+ -+# The PATH separator for the build system. -+PATH_SEPARATOR=$lt_PATH_SEPARATOR -+ - # The host system. - host_alias=$host_alias - host=$host -@@ -20850,9 +21615,11 @@ - # turn newlines into spaces. - NL2SP=$lt_lt_NL2SP - --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds -+# convert \$build file names to \$host format. -+to_host_file_cmd=$lt_cv_to_host_file_cmd -+ -+# convert \$build files to toolchain format. -+to_tool_file_cmd=$lt_cv_to_tool_file_cmd - - # An object symbol dumper. - OBJDUMP=$lt_OBJDUMP -@@ -20860,13 +21627,30 @@ - # Method to check whether dependent libraries are shared objects. - deplibs_check_method=$lt_deplibs_check_method - --# Command to use when deplibs_check_method == "file_magic". -+# Command to use when deplibs_check_method = "file_magic". - file_magic_cmd=$lt_file_magic_cmd - -+# How to find potential files when deplibs_check_method = "file_magic". -+file_magic_glob=$lt_file_magic_glob -+ -+# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -+want_nocaseglob=$lt_want_nocaseglob -+ -+# DLL creation program. -+DLLTOOL=$lt_DLLTOOL -+ -+# Command to associate shared and link libraries. -+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd -+ - # The archiver. - AR=$lt_AR -+ -+# Flags to create an archive. - AR_FLAGS=$lt_AR_FLAGS - -+# How to feed a file listing to the archiver. -+archiver_list_spec=$lt_archiver_list_spec -+ - # A symbol stripping program. - STRIP=$lt_STRIP - -@@ -20875,6 +21659,9 @@ - old_postinstall_cmds=$lt_old_postinstall_cmds - old_postuninstall_cmds=$lt_old_postuninstall_cmds - -+# Whether to use a lock for old archive extraction. -+lock_old_archive_extraction=$lock_old_archive_extraction -+ - # A C compiler. - LTCC=$lt_CC - -@@ -20893,14 +21680,14 @@ - # Transform the output of nm in a C name address pair when lib prefix is needed. - global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - --# The name of the directory that contains temporary libtool files. --objdir=$objdir -+# Specify filename containing input files for \$NM. -+nm_file_list_spec=$lt_nm_file_list_spec - --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL -+# The root where to search for dependent libraries,and in which our libraries should be installed. -+lt_sysroot=$lt_sysroot - --# An echo program that does not interpret backslashes. --ECHO=$lt_ECHO -+# The name of the directory that contains temporary libtool files. -+objdir=$objdir - - # Used to examine libraries when file_magic_cmd begins with "file". - MAGIC_CMD=$MAGIC_CMD -@@ -20908,6 +21695,9 @@ - # Must we lock files when doing compilation? - need_locks=$lt_need_locks - -+# Manifest tool. -+MANIFEST_TOOL=$lt_MANIFEST_TOOL -+ - # Tool to manipulate archived DWARF debug symbol files on Mac OS X. - DSYMUTIL=$lt_DSYMUTIL - -@@ -20964,6 +21754,9 @@ - # The coded name of the library, if different from the real name. - soname_spec=$lt_soname_spec - -+# Permission mode override for installation of shared libraries. -+install_override_mode=$lt_install_override_mode -+ - # Command to use after installation of a shared archive. - postinstall_cmds=$lt_postinstall_cmds - -@@ -21003,6 +21796,10 @@ - # The linker used to build libraries. - LD=$lt_LD - -+# How to create reloadable object files. -+reload_flag=$lt_reload_flag -+reload_cmds=$lt_reload_cmds -+ - # Commands used to build an old-style archive. - old_archive_cmds=$lt_old_archive_cmds - -@@ -21015,12 +21812,12 @@ - # Compiler flag to turn off builtin functions. - no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl -- - # Additional compiler flags for building library objects. - pic_flag=$lt_lt_prog_compiler_pic - -+# How to pass a linker flag through the compiler. -+wl=$lt_lt_prog_compiler_wl -+ - # Compiler flag to prevent dynamic linking. - link_static_flag=$lt_lt_prog_compiler_static - -@@ -21070,10 +21867,6 @@ - # This must work even if \$libdir does not exist - hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - --# If ld is used when linking, flag to hardcode \$libdir into a binary --# during linking. This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld -- - # Whether we need a single "-rpath" flag with a separated argument. - hardcode_libdir_separator=$lt_hardcode_libdir_separator - -@@ -21107,9 +21900,6 @@ - # Whether libtool must link a program against all its dependency libraries. - link_all_deplibs=$link_all_deplibs - --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path=$lt_fix_srcfile_path -- - # Set to "yes" if exported symbols are required. - always_export_symbols=$always_export_symbols - -@@ -21125,6 +21915,9 @@ - # Commands necessary for linking programs (against libraries) with templates. - prelink_cmds=$lt_prelink_cmds - -+# Commands necessary for finishing linking programs. -+postlink_cmds=$lt_postlink_cmds -+ - # Specify filename containing input files. - file_list_spec=$lt_file_list_spec - -@@ -21171,212 +21964,169 @@ - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? -- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ -- || (rm -f "$cfgfile"; exit 1) -- -- case $xsi_shell in -- yes) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_dirname file append nondir_replacement --# Compute the dirname of FILE. If nonempty, add APPEND to the result, --# otherwise set result to NONDIR_REPLACEMENT. --func_dirname () --{ -- case ${1} in -- */*) func_dirname_result="${1%/*}${2}" ;; -- * ) func_dirname_result="${3}" ;; -- esac --} -- --# func_basename file --func_basename () --{ -- func_basename_result="${1##*/}" --} -- --# func_dirname_and_basename file append nondir_replacement --# perform func_basename and func_dirname in a single function --# call: --# dirname: Compute the dirname of FILE. If nonempty, --# add APPEND to the result, otherwise set result --# to NONDIR_REPLACEMENT. --# value returned in "$func_dirname_result" --# basename: Compute filename of FILE. --# value retuned in "$func_basename_result" --# Implementation must be kept synchronized with func_dirname --# and func_basename. For efficiency, we do not delegate to --# those functions but instead duplicate the functionality here. --func_dirname_and_basename () --{ -- case ${1} in -- */*) func_dirname_result="${1%/*}${2}" ;; -- * ) func_dirname_result="${3}" ;; -- esac -- func_basename_result="${1##*/}" --} -- --# func_stripname prefix suffix name --# strip PREFIX and SUFFIX off of NAME. --# PREFIX and SUFFIX must not contain globbing or regex special --# characters, hashes, percent signs, but SUFFIX may contain a leading --# dot (in which case that matches only a dot). --func_stripname () --{ -- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -- # positional parameters, so assign one to ordinary parameter first. -- func_stripname_result=${3} -- func_stripname_result=${func_stripname_result#"${1}"} -- func_stripname_result=${func_stripname_result%"${2}"} --} -- --# func_opt_split --func_opt_split () --{ -- func_opt_split_opt=${1%%=*} -- func_opt_split_arg=${1#*=} --} -- --# func_lo2o object --func_lo2o () --{ -- case ${1} in -- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -- *) func_lo2o_result=${1} ;; -- esac --} -- --# func_xform libobj-or-source --func_xform () --{ -- func_xform_result=${1%.*}.lo --} -- --# func_arith arithmetic-term... --func_arith () --{ -- func_arith_result=$(( $* )) --} -- --# func_len string --# STRING may not start with a hyphen. --func_len () --{ -- func_len_result=${#1} --} -- --_LT_EOF -- ;; -- *) # Bourne compatible functions. -- cat << \_LT_EOF >> "$cfgfile" -- --# func_dirname file append nondir_replacement --# Compute the dirname of FILE. If nonempty, add APPEND to the result, --# otherwise set result to NONDIR_REPLACEMENT. --func_dirname () --{ -- # Extract subdirectory from the argument. -- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -- if test "X$func_dirname_result" = "X${1}"; then -- func_dirname_result="${3}" -- else -- func_dirname_result="$func_dirname_result${2}" -- fi --} -- --# func_basename file --func_basename () --{ -- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` --} -- -- --# func_stripname prefix suffix name --# strip PREFIX and SUFFIX off of NAME. --# PREFIX and SUFFIX must not contain globbing or regex special --# characters, hashes, percent signs, but SUFFIX may contain a leading --# dot (in which case that matches only a dot). --# func_strip_suffix prefix name --func_stripname () --{ -- case ${2} in -- .*) func_stripname_result=`$ECHO "X${3}" \ -- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; -- *) func_stripname_result=`$ECHO "X${3}" \ -- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; -- esac --} -- --# sed scripts: --my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' --my_sed_long_arg='1s/^-[^=]*=//' -- --# func_opt_split --func_opt_split () --{ -- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` -- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` --} -- --# func_lo2o object --func_lo2o () --{ -- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` --} -- --# func_xform libobj-or-source --func_xform () --{ -- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` --} -- --# func_arith arithmetic-term... --func_arith () --{ -- func_arith_result=`expr "$@"` --} -- --# func_len string --# STRING may not start with a hyphen. --func_len () --{ -- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` --} -- --_LT_EOF --esac -- --case $lt_shell_append in -- yes) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_append var value --# Append VALUE to the end of shell variable VAR. --func_append () --{ -- eval "$1+=\$2" --} --_LT_EOF -- ;; -- *) -- cat << \_LT_EOF >> "$cfgfile" -- --# func_append var value --# Append VALUE to the end of shell variable VAR. --func_append () --{ -- eval "$1=\$$1\$2" --} -- --_LT_EOF -- ;; -- esac -+ sed '$q' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) - -+ if test x"$xsi_shell" = xyes; then -+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -+func_dirname ()\ -+{\ -+\ case ${1} in\ -+\ */*) func_dirname_result="${1%/*}${2}" ;;\ -+\ * ) func_dirname_result="${3}" ;;\ -+\ esac\ -+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_basename ()$/,/^} # func_basename /c\ -+func_basename ()\ -+{\ -+\ func_basename_result="${1##*/}"\ -+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -+func_dirname_and_basename ()\ -+{\ -+\ case ${1} in\ -+\ */*) func_dirname_result="${1%/*}${2}" ;;\ -+\ * ) func_dirname_result="${3}" ;;\ -+\ esac\ -+\ func_basename_result="${1##*/}"\ -+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -+func_stripname ()\ -+{\ -+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -+\ # positional parameters, so assign one to ordinary parameter first.\ -+\ func_stripname_result=${3}\ -+\ func_stripname_result=${func_stripname_result#"${1}"}\ -+\ func_stripname_result=${func_stripname_result%"${2}"}\ -+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -+func_split_long_opt ()\ -+{\ -+\ func_split_long_opt_name=${1%%=*}\ -+\ func_split_long_opt_arg=${1#*=}\ -+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -+func_split_short_opt ()\ -+{\ -+\ func_split_short_opt_arg=${1#??}\ -+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -+func_lo2o ()\ -+{\ -+\ case ${1} in\ -+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -+\ *) func_lo2o_result=${1} ;;\ -+\ esac\ -+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_xform ()$/,/^} # func_xform /c\ -+func_xform ()\ -+{\ -+ func_xform_result=${1%.*}.lo\ -+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_arith ()$/,/^} # func_arith /c\ -+func_arith ()\ -+{\ -+ func_arith_result=$(( $* ))\ -+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_len ()$/,/^} # func_len /c\ -+func_len ()\ -+{\ -+ func_len_result=${#1}\ -+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+fi -+ -+if test x"$lt_shell_append" = xyes; then -+ sed -e '/^func_append ()$/,/^} # func_append /c\ -+func_append ()\ -+{\ -+ eval "${1}+=\\${2}"\ -+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -+func_append_quoted ()\ -+{\ -+\ func_quote_for_eval "${2}"\ -+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+test 0 -eq $? || _lt_function_replace_fail=: -+ -+ -+ # Save a `func_append' function call where possible by direct use of '+=' -+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+ test 0 -eq $? || _lt_function_replace_fail=: -+else -+ # Save a `func_append' function call even when '+=' is not available -+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ -+ && mv -f "$cfgfile.tmp" "$cfgfile" \ -+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -+ test 0 -eq $? || _lt_function_replace_fail=: -+fi -+ -+if test x"$_lt_function_replace_fail" = x":"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -+fi - -- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ -- || (rm -f "$cfgfile"; exit 1) - -- mv -f "$cfgfile" "$ofile" || -+ mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - -@@ -21388,6 +22138,10 @@ - # The linker used to build libraries. - LD=$lt_LD_CXX - -+# How to create reloadable object files. -+reload_flag=$lt_reload_flag_CXX -+reload_cmds=$lt_reload_cmds_CXX -+ - # Commands used to build an old-style archive. - old_archive_cmds=$lt_old_archive_cmds_CXX - -@@ -21400,12 +22154,12 @@ - # Compiler flag to turn off builtin functions. - no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl_CXX -- - # Additional compiler flags for building library objects. - pic_flag=$lt_lt_prog_compiler_pic_CXX - -+# How to pass a linker flag through the compiler. -+wl=$lt_lt_prog_compiler_wl_CXX -+ - # Compiler flag to prevent dynamic linking. - link_static_flag=$lt_lt_prog_compiler_static_CXX - -@@ -21455,10 +22209,6 @@ - # This must work even if \$libdir does not exist - hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX - --# If ld is used when linking, flag to hardcode \$libdir into a binary --# during linking. This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX -- - # Whether we need a single "-rpath" flag with a separated argument. - hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -@@ -21492,9 +22242,6 @@ - # Whether libtool must link a program against all its dependency libraries. - link_all_deplibs=$link_all_deplibs_CXX - --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path=$lt_fix_srcfile_path_CXX -- - # Set to "yes" if exported symbols are required. - always_export_symbols=$always_export_symbols_CXX - -@@ -21510,6 +22257,9 @@ - # Commands necessary for linking programs (against libraries) with templates. - prelink_cmds=$lt_prelink_cmds_CXX - -+# Commands necessary for finishing linking programs. -+postlink_cmds=$lt_postlink_cmds_CXX -+ - # Specify filename containing input files. - file_list_spec=$lt_file_list_spec_CXX - -@@ -21544,7 +22294,7 @@ - ac_clean_files=$ac_clean_files_save - - test $ac_write_fail = 0 || -- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 -+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - - # configure is writing to config.log, and then calls config.status. -@@ -21565,7 +22315,7 @@ - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. -- $ac_cs_success || as_fn_exit $? -+ $ac_cs_success || as_fn_exit 1 - fi - if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -diff -u -r hal-0.5.14/configure.in src/hal-0.5.14/configure.in ---- hal-0.5.14/configure.in 2009-08-24 14:42:29.000000000 +0200 -+++ src/hal-0.5.14/configure.in 2011-12-19 20:39:54.000000000 +0100 -@@ -479,9 +479,6 @@ - fi - AM_CONDITIONAL([HAVE_LIBPCI], [test "x$USE_LIBPCI" = "xyes"]) - --USE_LIBUSB20=no --USE_LIBUSB=no --LIBUSB20_LIBS="" - AC_ARG_WITH([backend], - AS_HELP_STRING([--with-backend=<name>], - [backend to use (linux/solaris/freebsd/dummy)]), -@@ -510,21 +507,25 @@ - AM_CONDITIONAL(HALD_COMPILE_SOLARIS, [test x$HALD_BACKEND = xsolaris], [Compiling for Solaris]) - AC_SUBST(HALD_BACKEND) - if test "x$HALD_BACKEND" = "xfreebsd"; then -- AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_LIBUSB20=yes], [USE_LIBUSB20=no]) --fi --if test "x$USE_LIBUSB20" = "xno"; then -- AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_LIBUSB=yes], [USE_LIBUSB=no]) --fi --AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB20" = "xyes"]) --AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB" = "xyes"]) --if test "x$USE_LIBUSB20" = "xyes"; then -- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) -- LIBUSB20_LIBS="-lusb20" --elif test "x$USE_LIBUSB" = "xyes"; then -- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) -- LIBUSB20_LIBS="-lusb" -+ USE_BSDLIBUSB20=no -+ USE_BSDLIBUSB=no -+ LIBUSB20_LIBS="" -+ AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_BSDLIBUSB20=yes], [USE_BSDLIBUSB20=no]) -+ if test "x$USE_BSDLIBUSB20" = "xno"; then -+ AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_BSDLIBUSB=yes], [USE_BSDLIBUSB=no]) -+ fi -+ AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_BSDLIBUSB20" = "xyes" -o "x$USE_BSDLIBUSB" = "xyes"]) -+ if test "x$USE_BSDLIBUSB20" = "xyes"; then -+ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) -+ LIBUSB20_LIBS="-lusb20" -+ elif test "x$USE_BSDLIBUSB" = "xyes"; then -+ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) -+ LIBUSB20_LIBS="-lusb" -+ fi -+ AC_SUBST(LIBUSB20_LIBS) -+else -+ AM_CONDITIONAL([HAVE_LIBUSB20], [false]) - fi --AC_SUBST(LIBUSB20_LIBS) - - dnl DBUS API is subject to changes - AC_DEFINE_UNQUOTED(DBUS_API_SUBJECT_TO_CHANGE, [], [DBUS API is subject to change]) -Only in src/hal-0.5.14/doc/api/libhal: Makefile -diff -u -r hal-0.5.14/doc/api/libhal/Makefile.in src/hal-0.5.14/doc/api/libhal/Makefile.in ---- hal-0.5.14/doc/api/libhal/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/doc/api/libhal/Makefile.in 2011-12-19 20:40:15.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -89,6 +89,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -131,6 +132,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -151,6 +153,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -173,6 +177,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -206,7 +211,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/doc/api/libhal-storage: Makefile -diff -u -r hal-0.5.14/doc/api/libhal-storage/Makefile.in src/hal-0.5.14/doc/api/libhal-storage/Makefile.in ---- hal-0.5.14/doc/api/libhal-storage/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/doc/api/libhal-storage/Makefile.in 2011-12-19 20:40:15.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -89,6 +89,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -131,6 +132,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -151,6 +153,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -173,6 +177,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -206,7 +211,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/doc/api: Makefile -diff -u -r hal-0.5.14/doc/api/Makefile.in src/hal-0.5.14/doc/api/Makefile.in ---- hal-0.5.14/doc/api/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/doc/api/Makefile.in 2011-12-19 20:40:15.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -122,6 +122,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -164,6 +165,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -184,6 +186,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -206,6 +210,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -239,7 +244,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -309,7 +313,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -334,7 +338,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/doc: Makefile -diff -u -r hal-0.5.14/doc/Makefile.in src/hal-0.5.14/doc/Makefile.in ---- hal-0.5.14/doc/Makefile.in 2009-11-30 23:22:35.000000000 +0100 -+++ src/hal-0.5.14/doc/Makefile.in 2011-12-19 20:40:15.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -122,6 +122,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -164,6 +165,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -184,6 +186,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -206,6 +210,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -239,7 +244,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -309,7 +313,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -334,7 +338,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/doc/man: Makefile -diff -u -r hal-0.5.14/doc/man/Makefile.in src/hal-0.5.14/doc/man/Makefile.in ---- hal-0.5.14/doc/man/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/doc/man/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -109,6 +109,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -151,6 +152,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -171,6 +173,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -193,6 +197,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -226,7 +231,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/doc/spec: Makefile -diff -u -r hal-0.5.14/doc/spec/Makefile.in src/hal-0.5.14/doc/spec/Makefile.in ---- hal-0.5.14/doc/spec/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/doc/spec/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -107,6 +107,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -149,6 +150,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -169,6 +171,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -191,6 +195,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -224,7 +229,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/information/10freedesktop: Makefile -diff -u -r hal-0.5.14/fdi/information/10freedesktop/Makefile.in src/hal-0.5.14/fdi/information/10freedesktop/Makefile.in ---- hal-0.5.14/fdi/information/10freedesktop/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/fdi/information/10freedesktop/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -109,6 +109,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -151,6 +152,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -171,6 +173,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -193,6 +197,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -226,7 +231,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/information/20thirdparty: Makefile -diff -u -r hal-0.5.14/fdi/information/20thirdparty/Makefile.in src/hal-0.5.14/fdi/information/20thirdparty/Makefile.in ---- hal-0.5.14/fdi/information/20thirdparty/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/information/20thirdparty/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -107,6 +107,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -149,6 +150,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -169,6 +171,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -191,6 +195,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -224,7 +229,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/information: Makefile -diff -u -r hal-0.5.14/fdi/information/Makefile.in src/hal-0.5.14/fdi/information/Makefile.in ---- hal-0.5.14/fdi/information/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/information/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -147,6 +147,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -189,6 +190,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -209,6 +211,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -231,6 +235,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -264,7 +269,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -351,7 +355,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -376,7 +380,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/fdi: Makefile -diff -u -r hal-0.5.14/fdi/Makefile.in src/hal-0.5.14/fdi/Makefile.in ---- hal-0.5.14/fdi/Makefile.in 2009-11-30 23:22:36.000000000 +0100 -+++ src/hal-0.5.14/fdi/Makefile.in 2011-12-19 20:40:16.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -147,6 +147,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -189,6 +190,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -209,6 +211,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -231,6 +235,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -264,7 +269,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -352,7 +356,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -377,7 +381,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -diff -u -r hal-0.5.14/fdi/policy/10osvendor/10-x11-input.fdi src/hal-0.5.14/fdi/policy/10osvendor/10-x11-input.fdi ---- hal-0.5.14/fdi/policy/10osvendor/10-x11-input.fdi 2009-06-26 09:28:39.000000000 +0200 -+++ src/hal-0.5.14/fdi/policy/10osvendor/10-x11-input.fdi 2011-12-19 20:39:54.000000000 +0100 -@@ -2,6 +2,12 @@ - <deviceinfo version="0.2"> - <device> - -+ <!-- This KVMS has abs x/y and buttons. It only has inputInfo.joystick -+ set by hal and doesn't get picked up by default --> -+ <match key="input.product" contains="American Megatrends Inc. Virtual Keyboard and Mouse"> -+ <merge key="input.x11_driver" type="string">evdev</merge> -+ </match> -+ - <!-- KVM emulates a USB graphics tablet which works in absolute coordinate mode --> - <match key="input.product" contains="QEMU USB Tablet"> - <merge key="input.x11_driver" type="string">evdev</merge> -@@ -16,6 +22,14 @@ - </match> - </match> - -+ <match key="info.capabilities" contains="input.touchpad"> -+ <merge key="input.x11_driver" type="string">mouse</merge> -+ <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" -+ string="Linux"> -+ <merge key="input.x11_driver" type="string">evdev</merge> -+ </match> -+ </match> -+ - <match key="info.capabilities" contains="input.tablet"> - <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" - string="Linux"> -@@ -32,5 +46,18 @@ - <merge key="input.x11_driver" type="string">evdev</merge> - </match> - </match> -+ -+ <!-- http://bugs.freedesktop.org/show_bug.cgi?id=22442 -+ Posts accel data through ABS_X/ABS_Y, makes X unusable --> -+ <match key="info.product" contains="ThinkPad HDAPS accelerometer data"> -+ <remove key="input.x11_driver" /> -+ </match> -+ -+ <!-- https://bugzilla.redhat.com/show_bug.cgi?id=523914 -+ Mouse does not move in PV Xen guest --> -+ <match key="info.product" contains="Xen Virtual Pointer"> -+ <merge key="input.x11_options.IgnoreAbsoluteAxes" type="string">false</merge> -+ <merge key="input.x11_options.IgnoreRelativeAxes" type="string">false</merge> -+ </match> - </device> - </deviceinfo> -Only in src/hal-0.5.14/fdi/policy/10osvendor: 10-x11-input.fdi.orig -diff -u -r hal-0.5.14/fdi/policy/10osvendor/20-storage-methods.fdi src/hal-0.5.14/fdi/policy/10osvendor/20-storage-methods.fdi ---- hal-0.5.14/fdi/policy/10osvendor/20-storage-methods.fdi 2009-11-05 15:09:01.000000000 +0100 -+++ src/hal-0.5.14/fdi/policy/10osvendor/20-storage-methods.fdi 2011-12-19 20:39:54.000000000 +0100 -@@ -99,6 +99,11 @@ - </match> - </match> - -+ <!-- Hide partitions marked as Compaq Diagnostics --> -+ <match key="volume.partition.type" string="0x12"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ - <!-- EFI firmware partitions --> - <match key="volume.fstype" string="vfat"> - <match key="volume.label" string="EFI"> -Only in src/hal-0.5.14/fdi/policy/10osvendor: 20-storage-methods.fdi.orig -Only in src/hal-0.5.14/fdi/policy/10osvendor: Makefile -diff -u -r hal-0.5.14/fdi/policy/10osvendor/Makefile.in src/hal-0.5.14/fdi/policy/10osvendor/Makefile.in ---- hal-0.5.14/fdi/policy/10osvendor/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/policy/10osvendor/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -127,6 +127,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -169,6 +170,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -189,6 +191,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -211,6 +215,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -244,7 +249,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/policy/20thirdparty: Makefile -diff -u -r hal-0.5.14/fdi/policy/20thirdparty/Makefile.in src/hal-0.5.14/fdi/policy/20thirdparty/Makefile.in ---- hal-0.5.14/fdi/policy/20thirdparty/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/policy/20thirdparty/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -107,6 +107,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -149,6 +150,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -169,6 +171,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -191,6 +195,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -224,7 +229,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/policy: Makefile -diff -u -r hal-0.5.14/fdi/policy/Makefile.in src/hal-0.5.14/fdi/policy/Makefile.in ---- hal-0.5.14/fdi/policy/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/policy/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -147,6 +147,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -189,6 +190,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -209,6 +211,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -231,6 +235,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -264,7 +269,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -351,7 +355,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -376,7 +380,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/fdi/preprobe/10freedesktop: Makefile -diff -u -r hal-0.5.14/fdi/preprobe/10freedesktop/Makefile.in src/hal-0.5.14/fdi/preprobe/10freedesktop/Makefile.in ---- hal-0.5.14/fdi/preprobe/10freedesktop/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/preprobe/10freedesktop/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -107,6 +107,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -149,6 +150,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -169,6 +171,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -191,6 +195,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -224,7 +229,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/preprobe/20thirdparty: Makefile -diff -u -r hal-0.5.14/fdi/preprobe/20thirdparty/Makefile.in src/hal-0.5.14/fdi/preprobe/20thirdparty/Makefile.in ---- hal-0.5.14/fdi/preprobe/20thirdparty/Makefile.in 2009-11-30 23:22:37.000000000 +0100 -+++ src/hal-0.5.14/fdi/preprobe/20thirdparty/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -107,6 +107,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -149,6 +150,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -169,6 +171,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -191,6 +195,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -224,7 +229,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/fdi/preprobe: Makefile -diff -u -r hal-0.5.14/fdi/preprobe/Makefile.in src/hal-0.5.14/fdi/preprobe/Makefile.in ---- hal-0.5.14/fdi/preprobe/Makefile.in 2009-11-30 23:22:38.000000000 +0100 -+++ src/hal-0.5.14/fdi/preprobe/Makefile.in 2011-12-19 20:40:17.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -147,6 +147,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -189,6 +190,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -209,6 +211,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -231,6 +235,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -264,7 +269,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -351,7 +355,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -376,7 +380,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -diff -u -r hal-0.5.14/hal.conf src/hal-0.5.14/hal.conf ---- hal-0.5.14/hal.conf 2009-11-30 23:24:16.000000000 +0100 -+++ src/hal-0.5.14/hal.conf 2011-12-19 20:41:06.000000000 +0100 -@@ -6,8 +6,8 @@ - <!-- This configuration file specifies the required security policies - for the HAL to work. --> - -- <!-- Only root or user haldaemon can own the HAL service --> -- <policy user="haldaemon"> -+ <!-- Only root or user hal can own the HAL service --> -+ <policy user="hal"> - <allow own="org.freedesktop.Hal"/> - </policy> - <policy user="root"> -@@ -25,7 +25,41 @@ - send_interface="org.freedesktop.Hal.Device"/> - <allow send_destination="org.freedesktop.Hal" - send_interface="org.freedesktop.Hal.Manager"/> -+ </policy> - -+ <!-- Only allow users at the local console to manipulate devices --> -+ <policy at_console="true"> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.CPUFreq"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.DockStation"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.KillSwitch"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.LaptopPanel"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Leds"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.LightSensor"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Storage"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Storage.Removable"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Volume"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.WakeOnLan"/> -+ -+ </policy> -+ -+ <!-- well,...and root too --> -+ <policy user="root"> - <allow send_destination="org.freedesktop.Hal" - send_interface="org.freedesktop.Hal.Device.CPUFreq"/> - <allow send_destination="org.freedesktop.Hal" -diff -u -r hal-0.5.14/hal.conf.in src/hal-0.5.14/hal.conf.in ---- hal-0.5.14/hal.conf.in 2009-02-04 23:07:23.000000000 +0100 -+++ src/hal-0.5.14/hal.conf.in 2011-12-19 20:39:54.000000000 +0100 -@@ -25,7 +25,41 @@ - send_interface="org.freedesktop.Hal.Device"/> - <allow send_destination="org.freedesktop.Hal" - send_interface="org.freedesktop.Hal.Manager"/> -+ </policy> - -+ <!-- Only allow users at the local console to manipulate devices --> -+ <policy at_console="true"> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.CPUFreq"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.DockStation"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.KillSwitch"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.LaptopPanel"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Leds"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.LightSensor"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Storage"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Storage.Removable"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Volume"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/> -+ <allow send_destination="org.freedesktop.Hal" -+ send_interface="org.freedesktop.Hal.Device.WakeOnLan"/> -+ -+ </policy> -+ -+ <!-- well,...and root too --> -+ <policy user="root"> - <allow send_destination="org.freedesktop.Hal" - send_interface="org.freedesktop.Hal.Device.CPUFreq"/> - <allow send_destination="org.freedesktop.Hal" -Only in src/hal-0.5.14/hald: .deps -Only in src/hal-0.5.14/hald/dummy: .deps -Only in src/hal-0.5.14/hald/dummy: libhald_dummy.la -Only in src/hal-0.5.14/hald/dummy: .libs -Only in src/hal-0.5.14/hald/dummy: Makefile -diff -u -r hal-0.5.14/hald/dummy/Makefile.in src/hal-0.5.14/hald/dummy/Makefile.in ---- hal-0.5.14/hald/dummy/Makefile.in 2009-11-30 23:22:38.000000000 +0100 -+++ src/hal-0.5.14/hald/dummy/Makefile.in 2011-12-19 20:40:18.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -112,6 +112,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -154,6 +155,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -174,6 +176,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -196,6 +200,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -229,7 +234,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/hald/dummy: osspec.lo -Only in src/hal-0.5.14/hald/freebsd/addons: .deps -Only in src/hal-0.5.14/hald/freebsd/addons: Makefile -diff -u -r hal-0.5.14/hald/freebsd/addons/Makefile.in src/hal-0.5.14/hald/freebsd/addons/Makefile.in ---- hal-0.5.14/hald/freebsd/addons/Makefile.in 2009-11-30 23:22:39.000000000 +0100 -+++ src/hal-0.5.14/hald/freebsd/addons/Makefile.in 2011-12-19 20:40:19.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -127,6 +127,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -169,6 +170,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -189,6 +191,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -211,6 +215,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -244,7 +249,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/hald/freebsd: .deps -Only in src/hal-0.5.14/hald/freebsd/libprobe: .deps -Only in src/hal-0.5.14/hald/freebsd/libprobe: Makefile -diff -u -r hal-0.5.14/hald/freebsd/libprobe/Makefile.in src/hal-0.5.14/hald/freebsd/libprobe/Makefile.in ---- hal-0.5.14/hald/freebsd/libprobe/Makefile.in 2009-11-30 23:22:39.000000000 +0100 -+++ src/hal-0.5.14/hald/freebsd/libprobe/Makefile.in 2011-12-19 20:40:19.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -118,6 +118,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -160,6 +161,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -180,6 +182,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -202,6 +206,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -235,7 +240,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/hald/freebsd: Makefile -diff -u -r hal-0.5.14/hald/freebsd/Makefile.in src/hal-0.5.14/hald/freebsd/Makefile.in ---- hal-0.5.14/hald/freebsd/Makefile.in 2009-11-30 23:22:38.000000000 +0100 -+++ src/hal-0.5.14/hald/freebsd/Makefile.in 2011-12-19 20:40:18.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -173,6 +173,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -215,6 +216,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -235,6 +237,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -257,6 +261,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -290,7 +295,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -438,7 +442,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -463,7 +467,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/hald/freebsd/probing: .deps -Only in src/hal-0.5.14/hald/freebsd/probing: Makefile -diff -u -r hal-0.5.14/hald/freebsd/probing/Makefile.in src/hal-0.5.14/hald/freebsd/probing/Makefile.in ---- hal-0.5.14/hald/freebsd/probing/Makefile.in 2009-11-30 23:22:39.000000000 +0100 -+++ src/hal-0.5.14/hald/freebsd/probing/Makefile.in 2011-12-19 20:40:19.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -167,6 +167,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -209,6 +210,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -229,6 +231,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -251,6 +255,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -284,7 +289,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -diff -u -r hal-0.5.14/hald/linux/addons/addon-imac-backlight.c src/hal-0.5.14/hald/linux/addons/addon-imac-backlight.c ---- hal-0.5.14/hald/linux/addons/addon-imac-backlight.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/addons/addon-imac-backlight.c 2011-12-19 20:39:54.000000000 +0100 -@@ -158,7 +158,8 @@ - goto out; - } - -- if (ioperm(0xB2, 0xB3, 1) < 0) -+ /* Allow access to ports 0xB2 and 0xB3 */ -+ if (ioperm(0xB2, 2, 1) < 0) - { - HAL_ERROR (("ioperm failed (you should be root).")); - exit(1); -diff -u -r hal-0.5.14/hald/linux/addons/addon-macbookpro-backlight.c src/hal-0.5.14/hald/linux/addons/addon-macbookpro-backlight.c ---- hal-0.5.14/hald/linux/addons/addon-macbookpro-backlight.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/addons/addon-macbookpro-backlight.c 2011-12-19 20:39:54.000000000 +0100 -@@ -507,7 +507,8 @@ - state = INREG(0x7ae4); - OUTREG(0x7ae4, state); - -- if (ioperm (0x300, 0x304, 1) < 0) { -+ /* Allow access to porta 0x300 through 0x304 */ -+ if (ioperm (0x300, 5, 1) < 0) { - HAL_ERROR (("ioperm failed (you should be root).")); - exit(1); - } -Only in src/hal-0.5.14/hald/linux/addons: .deps -Only in src/hal-0.5.14/hald/linux/addons: Makefile -diff -u -r hal-0.5.14/hald/linux/addons/Makefile.in src/hal-0.5.14/hald/linux/addons/Makefile.in ---- hal-0.5.14/hald/linux/addons/Makefile.in 2009-11-30 23:22:39.000000000 +0100 -+++ src/hal-0.5.14/hald/linux/addons/Makefile.in 2011-12-19 20:40:20.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -311,6 +311,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -353,6 +354,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -373,6 +375,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -395,6 +399,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -428,7 +433,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/hald/linux: .deps -Only in src/hal-0.5.14/hald/linux: Makefile -diff -u -r hal-0.5.14/hald/linux/Makefile.in src/hal-0.5.14/hald/linux/Makefile.in ---- hal-0.5.14/hald/linux/Makefile.in 2009-11-30 23:22:39.000000000 +0100 -+++ src/hal-0.5.14/hald/linux/Makefile.in 2011-12-19 20:40:19.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -169,6 +169,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -211,6 +212,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -231,6 +233,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -253,6 +257,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -286,7 +291,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -418,7 +422,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -443,7 +447,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -diff -u -r hal-0.5.14/hald/linux/osspec.c src/hal-0.5.14/hald/linux/osspec.c ---- hal-0.5.14/hald/linux/osspec.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/osspec.c 2011-12-19 20:39:54.000000000 +0100 -@@ -215,6 +215,11 @@ - g_free (str); - } - g_free (dstr); -+ } else if (strncmp(key, "DM_UDEV_DISABLE_OTHER_RULES_FLAG=", 33) == 0) { -+ if (strtoul(&key[33], NULL, 10) == 1) { -+ HAL_INFO (("ignoring device requested by DM udev rules")); -+ goto invalid; -+ } - } - } - -Only in src/hal-0.5.14/hald/linux/probing: .deps -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-hiddev -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-ieee1394-unit -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-input -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-net-bluetooth -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-pc-floppy -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-printer -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-serial -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-smbios -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-storage -Only in src/hal-0.5.14/hald/linux/probing: hald-probe-volume -Only in src/hal-0.5.14/hald/linux/probing: .libs -Only in src/hal-0.5.14/hald/linux/probing: linux_dvd_rw_utils.o -Only in src/hal-0.5.14/hald/linux/probing: logger.o -Only in src/hal-0.5.14/hald/linux/probing: Makefile -diff -u -r hal-0.5.14/hald/linux/probing/Makefile.in src/hal-0.5.14/hald/linux/probing/Makefile.in ---- hal-0.5.14/hald/linux/probing/Makefile.in 2009-11-30 23:22:40.000000000 +0100 -+++ src/hal-0.5.14/hald/linux/probing/Makefile.in 2011-12-19 20:40:20.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -183,6 +183,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -225,6 +226,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -245,6 +247,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -267,6 +271,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -300,7 +305,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -diff -u -r hal-0.5.14/hald/linux/probing/probe-hiddev.c src/hal-0.5.14/hald/linux/probing/probe-hiddev.c ---- hal-0.5.14/hald/linux/probing/probe-hiddev.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-hiddev.c 2011-12-19 20:39:54.000000000 +0100 -@@ -57,11 +57,12 @@ - /* assume failure */ - ret = 1; - -+ dbus_error_init (&error); -+ - udi = getenv ("UDI"); - if (udi == NULL) - goto out; - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-hiddev.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-ieee1394-unit.c src/hal-0.5.14/hald/linux/probing/probe-ieee1394-unit.c ---- hal-0.5.14/hald/linux/probing/probe-ieee1394-unit.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-ieee1394-unit.c 2011-12-19 20:39:54.000000000 +0100 -@@ -388,6 +388,8 @@ - - setup_logger (); - -+ dbus_error_init (&error); -+ - udi = getenv ("UDI"); - if (udi == NULL) - goto out; -@@ -396,7 +398,6 @@ - if (ieee1394_udi == NULL) - goto out; - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-ieee1394-unit.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-input.c src/hal-0.5.14/hald/linux/probing/probe-input.c ---- hal-0.5.14/hald/linux/probing/probe-input.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-input.c 2011-12-19 20:39:54.000000000 +0100 -@@ -70,6 +70,7 @@ - fd = -1; - - setup_logger (); -+ dbus_error_init (&error); - - button_type = getenv ("HAL_PROP_BUTTON_TYPE"); - if (button_type == NULL) -@@ -96,7 +97,6 @@ - if (udi == NULL) - goto out; - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-input.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-net-bluetooth.c src/hal-0.5.14/hald/linux/probing/probe-net-bluetooth.c ---- hal-0.5.14/hald/linux/probing/probe-net-bluetooth.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-net-bluetooth.c 2011-12-19 20:39:54.000000000 +0100 -@@ -141,6 +141,8 @@ - DBusMessage *reply = NULL; - DBusError error; - -+ dbus_error_init (&error); -+ - udi = getenv ("UDI"); - if (udi == NULL) - goto out; -@@ -151,8 +153,6 @@ - - HAL_INFO (("Investigating '%s'", iface)); - -- dbus_error_init (&error); -- - if ((conn = dbus_bus_get (DBUS_BUS_SYSTEM, &error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-net-bluetooth.o -Only in src/hal-0.5.14/hald/linux/probing: probe-pc-floppy.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-printer.c src/hal-0.5.14/hald/linux/probing/probe-printer.c ---- hal-0.5.14/hald/linux/probing/probe-printer.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-printer.c 2011-12-19 20:39:54.000000000 +0100 -@@ -66,6 +66,8 @@ - ret = 1; - - setup_logger (); -+ -+ dbus_error_init (&error); - - udi = getenv ("UDI"); - if (udi == NULL) { -@@ -73,7 +75,6 @@ - goto out; - } - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { - HAL_ERROR (("ctx init failed")); - goto out; -Only in src/hal-0.5.14/hald/linux/probing: probe-printer.o -Only in src/hal-0.5.14/hald/linux/probing: probe-serial.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-smbios.c src/hal-0.5.14/hald/linux/probing/probe-smbios.c ---- hal-0.5.14/hald/linux/probing/probe-smbios.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-smbios.c 2011-12-19 20:39:54.000000000 +0100 -@@ -129,6 +129,8 @@ - ret = 1; - - setup_logger (); -+ -+ dbus_error_init (&error); - - udi = getenv ("UDI"); - if (udi == NULL) { -@@ -136,7 +138,6 @@ - goto out; - } - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { - HAL_ERROR (("ctx init failed")); - goto out; -Only in src/hal-0.5.14/hald/linux/probing: probe-smbios.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-storage.c src/hal-0.5.14/hald/linux/probing/probe-storage.c ---- hal-0.5.14/hald/linux/probing/probe-storage.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-storage.c 2011-12-19 20:39:54.000000000 +0100 -@@ -109,6 +109,8 @@ - /* assume failure */ - ret = 1; - -+ dbus_error_init (&error); -+ - if ((udi = getenv ("UDI")) == NULL) - goto out; - if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) -@@ -127,7 +129,6 @@ - else - only_check_for_fs = FALSE; - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-storage.o -diff -u -r hal-0.5.14/hald/linux/probing/probe-video4linux.c src/hal-0.5.14/hald/linux/probing/probe-video4linux.c ---- hal-0.5.14/hald/linux/probing/probe-video4linux.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-video4linux.c 2011-12-19 20:44:20.000000000 +0100 -@@ -30,7 +30,7 @@ - #include <sys/types.h> - #include <sys/time.h> - #include <sys/ioctl.h> --#include <linux/videodev.h> -+#include <libv4l1-videodev.h> - #include <linux/videodev2.h> - #include <errno.h> - #include <fcntl.h> -@@ -58,6 +58,8 @@ - - setup_logger (); - -+ dbus_error_init (&error); -+ - device_file = getenv ("HAL_PROP_VIDEO4LINUX_DEVICE"); - if (device_file == NULL) - goto out; -@@ -66,7 +68,6 @@ - if (udi == NULL) - goto out; - -- dbus_error_init (&error); - ctx = libhal_ctx_init_direct (&error); - if (ctx == NULL) - goto out; -diff -u -r hal-0.5.14/hald/linux/probing/probe-volume.c src/hal-0.5.14/hald/linux/probing/probe-volume.c ---- hal-0.5.14/hald/linux/probing/probe-volume.c 2009-08-24 14:42:30.000000000 +0200 -+++ src/hal-0.5.14/hald/linux/probing/probe-volume.c 2011-12-19 20:39:54.000000000 +0100 -@@ -318,6 +318,8 @@ - /* assume failure */ - ret = 1; - -+ dbus_error_init (&error); -+ - if ((udi = getenv ("UDI")) == NULL) - goto out; - if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) -@@ -346,7 +348,6 @@ - - fsusage = getenv ("HAL_PROP_VOLUME_FSUSAGE"); - -- dbus_error_init (&error); - if ((ctx = libhal_ctx_init_direct (&error)) == NULL) - goto out; - -Only in src/hal-0.5.14/hald/linux/probing: probe-volume.o -Only in src/hal-0.5.14/hald/linux/probing: util_helper.o -Only in src/hal-0.5.14/hald: Makefile -diff -u -r hal-0.5.14/hald/Makefile.in src/hal-0.5.14/hald/Makefile.in ---- hal-0.5.14/hald/Makefile.in 2009-11-30 23:22:38.000000000 +0100 -+++ src/hal-0.5.14/hald/Makefile.in 2011-12-19 20:40:18.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -205,6 +205,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -247,6 +248,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -267,6 +269,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -289,6 +293,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -322,7 +327,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -642,7 +646,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -667,7 +671,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/hald/solaris/addons: .deps -Only in src/hal-0.5.14/hald/solaris/addons: Makefile -diff -u -r hal-0.5.14/hald/solaris/addons/Makefile.in src/hal-0.5.14/hald/solaris/addons/Makefile.in ---- hal-0.5.14/hald/solaris/addons/Makefile.in 2009-11-30 23:22:40.000000000 +0100 -+++ src/hal-0.5.14/hald/solaris/addons/Makefile.in 2011-12-19 20:40:20.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -116,6 +116,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -158,6 +159,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -178,6 +180,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -200,6 +204,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -233,7 +238,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/hald/solaris: .deps -Only in src/hal-0.5.14/hald/solaris: Makefile -diff -u -r hal-0.5.14/hald/solaris/Makefile.in src/hal-0.5.14/hald/solaris/Makefile.in ---- hal-0.5.14/hald/solaris/Makefile.in 2009-11-30 23:22:40.000000000 +0100 -+++ src/hal-0.5.14/hald/solaris/Makefile.in 2011-12-19 20:40:20.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -153,6 +153,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -195,6 +196,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -215,6 +217,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -237,6 +241,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -270,7 +275,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -401,7 +405,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -426,7 +430,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -Only in src/hal-0.5.14/hald/solaris/probing: .deps -Only in src/hal-0.5.14/hald/solaris/probing: Makefile -diff -u -r hal-0.5.14/hald/solaris/probing/Makefile.in src/hal-0.5.14/hald/solaris/probing/Makefile.in ---- hal-0.5.14/hald/solaris/probing/Makefile.in 2009-11-30 23:22:40.000000000 +0100 -+++ src/hal-0.5.14/hald/solaris/probing/Makefile.in 2011-12-19 20:40:21.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -136,6 +136,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -178,6 +179,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -198,6 +200,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -220,6 +224,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -253,7 +258,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -diff -u -r hal-0.5.14/hald/util.h src/hal-0.5.14/hald/util.h ---- hal-0.5.14/hald/util.h 2009-04-03 16:31:34.000000000 +0200 -+++ src/hal-0.5.14/hald/util.h 2011-12-19 20:39:54.000000000 +0100 -@@ -38,7 +38,7 @@ - #endif - - #define HAL_NAME_MAX 256 --#define HAL_PATH_MAX 512 -+#define HAL_PATH_MAX 4096 - - gboolean hal_util_remove_trailing_slash (gchar *path); - -Only in src/hal-0.5.14/hald-runner: .deps -Only in src/hal-0.5.14/hald-runner: Makefile -diff -u -r hal-0.5.14/hald-runner/Makefile.in src/hal-0.5.14/hald-runner/Makefile.in ---- hal-0.5.14/hald-runner/Makefile.in 2009-11-30 23:22:38.000000000 +0100 -+++ src/hal-0.5.14/hald-runner/Makefile.in 2011-12-19 20:40:18.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -115,6 +115,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -157,6 +158,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -177,6 +179,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -199,6 +203,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -232,7 +237,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14: hal.pc -Only in src/hal-0.5.14: hal-storage.pc -Only in src/hal-0.5.14/libhal: .deps -Only in src/hal-0.5.14/libhal: libhal.la -Only in src/hal-0.5.14/libhal: libhal.lo -Only in src/hal-0.5.14/libhal: .libs -Only in src/hal-0.5.14/libhal: Makefile -diff -u -r hal-0.5.14/libhal/Makefile.in src/hal-0.5.14/libhal/Makefile.in ---- hal-0.5.14/libhal/Makefile.in 2009-11-30 23:22:41.000000000 +0100 -+++ src/hal-0.5.14/libhal/Makefile.in 2011-12-19 20:40:21.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -142,6 +142,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -184,6 +185,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -204,6 +206,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -226,6 +230,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -259,7 +264,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/libhal-storage: .deps -Only in src/hal-0.5.14/libhal-storage: libhal-storage.la -Only in src/hal-0.5.14/libhal-storage: libhal-storage.lo -Only in src/hal-0.5.14/libhal-storage: .libs -Only in src/hal-0.5.14/libhal-storage: Makefile -diff -u -r hal-0.5.14/libhal-storage/Makefile.in src/hal-0.5.14/libhal-storage/Makefile.in ---- hal-0.5.14/libhal-storage/Makefile.in 2009-11-30 23:22:41.000000000 +0100 -+++ src/hal-0.5.14/libhal-storage/Makefile.in 2011-12-19 20:40:21.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -142,6 +142,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -184,6 +185,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -204,6 +206,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -226,6 +230,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -259,7 +264,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14: libtool -diff -u -r hal-0.5.14/ltmain.sh src/hal-0.5.14/ltmain.sh ---- hal-0.5.14/ltmain.sh 2009-11-30 23:22:27.000000000 +0100 -+++ src/hal-0.5.14/ltmain.sh 2011-10-28 03:25:54.000000000 +0200 -@@ -1,9 +1,9 @@ --# Generated from ltmain.m4sh. - --# ltmain.sh (GNU libtool) 2.2.6 -+# libtool (GNU libtool) 2.4.2 - # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 - --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. - # This is free software; see the source for copying conditions. There is NO - # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -@@ -32,50 +32,57 @@ - # - # Provide generalized library-building support services. - # --# --config show all configuration variables --# --debug enable verbose shell tracing --# -n, --dry-run display commands without modifying any files --# --features display basic configuration information and exit --# --mode=MODE use operation mode MODE --# --preserve-dup-deps don't remove duplicate dependency libraries --# --quiet, --silent don't print informational messages --# --tag=TAG use configuration variables from tag TAG --# -v, --verbose print informational messages (default) --# --version print version information --# -h, --help print short or long help message -+# --config show all configuration variables -+# --debug enable verbose shell tracing -+# -n, --dry-run display commands without modifying any files -+# --features display basic configuration information and exit -+# --mode=MODE use operation mode MODE -+# --preserve-dup-deps don't remove duplicate dependency libraries -+# --quiet, --silent don't print informational messages -+# --no-quiet, --no-silent -+# print informational messages (default) -+# --no-warn don't display warning messages -+# --tag=TAG use configuration variables from tag TAG -+# -v, --verbose print more informational messages than default -+# --no-verbose don't print the extra informational messages -+# --version print version information -+# -h, --help, --help-all print short, long, or detailed help message - # - # MODE must be one of the following: - # --# clean remove files from the build directory --# compile compile a source file into a libtool object --# execute automatically set library path, then run a program --# finish complete the installation of libtool libraries --# install install libraries or executables --# link create a library or an executable --# uninstall remove libraries from an installed directory -+# clean remove files from the build directory -+# compile compile a source file into a libtool object -+# execute automatically set library path, then run a program -+# finish complete the installation of libtool libraries -+# install install libraries or executables -+# link create a library or an executable -+# uninstall remove libraries from an installed directory - # --# MODE-ARGS vary depending on the MODE. -+# MODE-ARGS vary depending on the MODE. When passed as first option, -+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. - # Try `$progname --help --mode=MODE' for a more detailed description of MODE. - # - # When reporting a bug, please describe a test case to reproduce it and - # include the following information: - # --# host-triplet: $host --# shell: $SHELL --# compiler: $LTCC --# compiler flags: $LTCFLAGS --# linker: $LD (gnu? $with_gnu_ld) --# $progname: (GNU libtool) 2.2.6 Debian-2.2.6a-4 --# automake: $automake_version --# autoconf: $autoconf_version -+# host-triplet: $host -+# shell: $SHELL -+# compiler: $LTCC -+# compiler flags: $LTCFLAGS -+# linker: $LD (gnu? $with_gnu_ld) -+# $progname: (GNU libtool) 2.4.2 -+# automake: $automake_version -+# autoconf: $autoconf_version - # - # Report bugs to <bug-libtool@gnu.org>. -+# GNU libtool home page: <http://www.gnu.org/software/libtool/>. -+# General help using GNU software: <http://www.gnu.org/gethelp/>. - --PROGRAM=ltmain.sh -+PROGRAM=libtool - PACKAGE=libtool --VERSION="2.2.6 Debian-2.2.6a-4" -+VERSION=2.4.2 - TIMESTAMP="" --package_revision=1.3012 -+package_revision=1.3337 - - # Be Bourne compatible - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -@@ -91,10 +98,15 @@ - BIN_SH=xpg4; export BIN_SH # for Tru64 - DUALCASE=1; export DUALCASE # for MKS sh - -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+$1 -+_LTECHO_EOF' -+} -+ - # NLS nuisances: We save the old values to restore during execute mode. --# Only set LANG and LC_ALL to C if already set. --# These must not be set unconditionally because not all systems understand --# e.g. LANG=C (notably SCO). - lt_user_locale= - lt_safe_locale= - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -@@ -107,24 +119,28 @@ - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" - done -+LC_ALL=C -+LANGUAGE=C -+export LANGUAGE LC_ALL - - $lt_unset CDPATH - - -+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -+# is ksh but when the shell is invoked as "sh" and the current value of -+# the _XPG environment variable is not equal to 1 (one), the special -+# positional parameter $0, within a function call, is the name of the -+# function. -+progpath="$0" - - - - : ${CP="cp -f"} --: ${ECHO="echo"} --: ${EGREP="/bin/grep -E"} --: ${FGREP="/bin/grep -F"} --: ${GREP="/bin/grep"} --: ${LN_S="ln -s"} -+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} - : ${MAKE="make"} - : ${MKDIR="mkdir"} - : ${MV="mv -f"} - : ${RM="rm -f"} --: ${SED="/bin/sed"} - : ${SHELL="${CONFIG_SHELL-/bin/sh}"} - : ${Xsed="$SED -e 1s/^X//"} - -@@ -144,6 +160,27 @@ - dirname="s,/[^/]*$,," - basename="s,^.*/,," - -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+} # func_dirname may be replaced by extended shell implementation -+ -+ -+# func_basename file -+func_basename () -+{ -+ func_basename_result=`$ECHO "${1}" | $SED "$basename"` -+} # func_basename may be replaced by extended shell implementation -+ -+ - # func_dirname_and_basename file append nondir_replacement - # perform func_basename and func_dirname in a single function - # call: -@@ -158,33 +195,183 @@ - # those functions but instead duplicate the functionality here. - func_dirname_and_basename () - { -- # Extract subdirectory from the argument. -- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -- if test "X$func_dirname_result" = "X${1}"; then -- func_dirname_result="${3}" -- else -- func_dirname_result="$func_dirname_result${2}" -- fi -- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -+} # func_dirname_and_basename may be replaced by extended shell implementation -+ -+ -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# func_strip_suffix prefix name -+func_stripname () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; -+ esac -+} # func_stripname may be replaced by extended shell implementation -+ -+ -+# These SED scripts presuppose an absolute path with a trailing slash. -+pathcar='s,^/\([^/]*\).*$,\1,' -+pathcdr='s,^/[^/]*,,' -+removedotparts=':dotsl -+ s@/\./@/@g -+ t dotsl -+ s,/\.$,/,' -+collapseslashes='s@/\{1,\}@/@g' -+finalslash='s,/*$,/,' -+ -+# func_normal_abspath PATH -+# Remove doubled-up and trailing slashes, "." path components, -+# and cancel out any ".." path components in PATH after making -+# it an absolute path. -+# value returned in "$func_normal_abspath_result" -+func_normal_abspath () -+{ -+ # Start from root dir and reassemble the path. -+ func_normal_abspath_result= -+ func_normal_abspath_tpath=$1 -+ func_normal_abspath_altnamespace= -+ case $func_normal_abspath_tpath in -+ "") -+ # Empty path, that just means $cwd. -+ func_stripname '' '/' "`pwd`" -+ func_normal_abspath_result=$func_stripname_result -+ return -+ ;; -+ # The next three entries are used to spot a run of precisely -+ # two leading slashes without using negated character classes; -+ # we take advantage of case's first-match behaviour. -+ ///*) -+ # Unusual form of absolute path, do nothing. -+ ;; -+ //*) -+ # Not necessarily an ordinary path; POSIX reserves leading '//' -+ # and for example Cygwin uses it to access remote file shares -+ # over CIFS/SMB, so we conserve a leading double slash if found. -+ func_normal_abspath_altnamespace=/ -+ ;; -+ /*) -+ # Absolute path, do nothing. -+ ;; -+ *) -+ # Relative path, prepend $cwd. -+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath -+ ;; -+ esac -+ # Cancel out all the simple stuff to save iterations. We also want -+ # the path to end with a slash for ease of parsing, so make sure -+ # there is one (and only one) here. -+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` -+ while :; do -+ # Processed it all yet? -+ if test "$func_normal_abspath_tpath" = / ; then -+ # If we ascended to the root using ".." the result may be empty now. -+ if test -z "$func_normal_abspath_result" ; then -+ func_normal_abspath_result=/ -+ fi -+ break -+ fi -+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$pathcar"` -+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$pathcdr"` -+ # Figure out what to do with it -+ case $func_normal_abspath_tcomponent in -+ "") -+ # Trailing empty path component, ignore it. -+ ;; -+ ..) -+ # Parent dir; strip last assembled component from result. -+ func_dirname "$func_normal_abspath_result" -+ func_normal_abspath_result=$func_dirname_result -+ ;; -+ *) -+ # Actual path component, append it. -+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent -+ ;; -+ esac -+ done -+ # Restore leading double-slash if one was found on entry. -+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result - } - --# Generated shell functions inserted here. -+# func_relative_path SRCDIR DSTDIR -+# generates a relative path from SRCDIR to DSTDIR, with a trailing -+# slash if non-empty, suitable for immediately appending a filename -+# without needing to append a separator. -+# value returned in "$func_relative_path_result" -+func_relative_path () -+{ -+ func_relative_path_result= -+ func_normal_abspath "$1" -+ func_relative_path_tlibdir=$func_normal_abspath_result -+ func_normal_abspath "$2" -+ func_relative_path_tbindir=$func_normal_abspath_result -+ -+ # Ascend the tree starting from libdir -+ while :; do -+ # check if we have found a prefix of bindir -+ case $func_relative_path_tbindir in -+ $func_relative_path_tlibdir) -+ # found an exact match -+ func_relative_path_tcancelled= -+ break -+ ;; -+ $func_relative_path_tlibdir*) -+ # found a matching prefix -+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" -+ func_relative_path_tcancelled=$func_stripname_result -+ if test -z "$func_relative_path_result"; then -+ func_relative_path_result=. -+ fi -+ break -+ ;; -+ *) -+ func_dirname $func_relative_path_tlibdir -+ func_relative_path_tlibdir=${func_dirname_result} -+ if test "x$func_relative_path_tlibdir" = x ; then -+ # Have to descend all the way to the root! -+ func_relative_path_result=../$func_relative_path_result -+ func_relative_path_tcancelled=$func_relative_path_tbindir -+ break -+ fi -+ func_relative_path_result=../$func_relative_path_result -+ ;; -+ esac -+ done -+ -+ # Now calculate path; take care to avoid doubling-up slashes. -+ func_stripname '' '/' "$func_relative_path_result" -+ func_relative_path_result=$func_stripname_result -+ func_stripname '/' '/' "$func_relative_path_tcancelled" -+ if test "x$func_stripname_result" != x ; then -+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result} -+ fi - --# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh --# is ksh but when the shell is invoked as "sh" and the current value of --# the _XPG environment variable is not equal to 1 (one), the special --# positional parameter $0, within a function call, is the name of the --# function. --progpath="$0" -+ # Normalisation. If bindir is libdir, return empty string, -+ # else relative path ending with a slash; either way, target -+ # file name can be directly appended. -+ if test ! -z "$func_relative_path_result"; then -+ func_stripname './' '' "$func_relative_path_result/" -+ func_relative_path_result=$func_stripname_result -+ fi -+} - - # The name of this program: --# In the unlikely event $progname began with a '-', it would play havoc with --# func_echo (imagine progname=-n), so we prepend ./ in that case: - func_dirname_and_basename "$progpath" - progname=$func_basename_result --case $progname in -- -*) progname=./$progname ;; --esac - - # Make sure we have an absolute path for reexecution: - case $progpath in -@@ -196,7 +383,7 @@ - ;; - *) - save_IFS="$IFS" -- IFS=: -+ IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break -@@ -215,6 +402,15 @@ - # Same as above, but do not quote variable references. - double_quote_subst='s/\(["`\\]\)/\\\1/g' - -+# Sed substitution that turns a string into a regex matching for the -+# string literally. -+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' -+ -+# Sed substitution that converts a w32 file name or path -+# which contains forward slashes, into one that contains -+# (escaped) backslashes. A very naive implementation. -+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -+ - # Re-`\' parameter expansions in output of double_quote_subst that were - # `\'-ed in input to the same. If an odd number of `\' preceded a '$' - # in input to double_quote_subst, that '$' was protected from expansion. -@@ -243,7 +439,7 @@ - # name if it has been set yet. - func_echo () - { -- $ECHO "$progname${mode+: }$mode: $*" -+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*" - } - - # func_verbose arg... -@@ -258,18 +454,25 @@ - : - } - -+# func_echo_all arg... -+# Invoke $ECHO with all args, space-separated. -+func_echo_all () -+{ -+ $ECHO "$*" -+} -+ - # func_error arg... - # Echo program name prefixed message to standard error. - func_error () - { -- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 - } - - # func_warning arg... - # Echo program name prefixed warning message to standard error. - func_warning () - { -- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 -+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -@@ -326,9 +529,9 @@ - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop -- my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` -+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` - done -- my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` -+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do -@@ -378,7 +581,7 @@ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - -- $ECHO "X$my_tmpdir" | $Xsed -+ $ECHO "$my_tmpdir" - } - - -@@ -392,7 +595,7 @@ - { - case $1 in - *[\\\`\"\$]*) -- func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; -+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac -@@ -419,7 +622,7 @@ - { - case $1 in - *[\\\`\"]*) -- my_arg=`$ECHO "X$1" | $Xsed \ -+ my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; -@@ -488,15 +691,39 @@ - fi - } - -- -- -+# func_tr_sh -+# Turn $1 into a string suitable for a shell variable name. -+# Result is stored in $func_tr_sh_result. All characters -+# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -+# if $1 begins with a digit, a '_' is prepended as well. -+func_tr_sh () -+{ -+ case $1 in -+ [0-9]* | *[!a-zA-Z0-9_]*) -+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` -+ ;; -+ * ) -+ func_tr_sh_result=$1 -+ ;; -+ esac -+} - - - # func_version - # Echo version message to standard output and exit. - func_version () - { -- $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { -+ $opt_debug -+ -+ $SED -n '/(C)/!b go -+ :more -+ /\./!{ -+ N -+ s/\n# / / -+ b more -+ } -+ :go -+ /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ -@@ -509,22 +736,28 @@ - # Echo short help message to standard output and exit. - func_usage () - { -- $SED -n '/^# Usage:/,/# -h/ { -+ $opt_debug -+ -+ $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" -- $ECHO -+ echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? - } - --# func_help --# Echo long help message to standard output and exit. -+# func_help [NOEXIT] -+# Echo long help message to standard output and exit, -+# unless 'noexit' is passed as argument. - func_help () - { -+ $opt_debug -+ - $SED -n '/^# Usage:/,/# Report bugs to/ { -+ :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* -@@ -534,11 +767,18 @@ - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ -- s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ -- s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ -+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ -+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p -- }' < "$progpath" -- exit $? -+ d -+ } -+ /^# .* home page:/b print -+ /^# General help using/b print -+ ' < "$progpath" -+ ret=$? -+ if test -z "$1"; then -+ exit $ret -+ fi - } - - # func_missing_arg argname -@@ -546,63 +786,106 @@ - # exit_cmd. - func_missing_arg () - { -- func_error "missing argument for $1" -+ $opt_debug -+ -+ func_error "missing argument for $1." - exit_cmd=exit - } - --exit_cmd=: - -+# func_split_short_opt shortopt -+# Set func_split_short_opt_name and func_split_short_opt_arg shell -+# variables after splitting SHORTOPT after the 2nd character. -+func_split_short_opt () -+{ -+ my_sed_short_opt='1s/^\(..\).*$/\1/;q' -+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q' -+ -+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` -+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -+} # func_split_short_opt may be replaced by extended shell implementation -+ -+ -+# func_split_long_opt longopt -+# Set func_split_long_opt_name and func_split_long_opt_arg shell -+# variables after splitting LONGOPT at the `=' sign. -+func_split_long_opt () -+{ -+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' -+ my_sed_long_arg='1s/^--[^=]*=//' -+ -+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` -+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -+} # func_split_long_opt may be replaced by extended shell implementation - -+exit_cmd=: - - - --# Check that we have a working $ECHO. --if test "X$1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X$1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then -- # Yippee, $ECHO works! -- : --else -- # Restart under the correct shell, and then maybe $ECHO will work. -- exec $SHELL "$progpath" --no-reexec ${1+"$@"} --fi - --if test "X$1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat <<EOF --$* --EOF -- exit $EXIT_SUCCESS --fi - - magic="%%%MAGIC variable%%%" - magic_exe="%%%MAGIC EXE variable%%%" - - # Global variables. --# $mode is unset - nonopt= --execute_dlfiles= - preserve_args= - lo2o="s/\\.lo\$/.${objext}/" - o2lo="s/\\.${objext}\$/.lo/" - extracted_archives= - extracted_serial=0 - --opt_dry_run=false --opt_duplicate_deps=false --opt_silent=false --opt_debug=: -- - # If this variable is set in any of the actions, the command in it - # will be execed at the end. This prevents here-documents from being - # left over by shells. - exec_cmd= - -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "${1}=\$${1}\${2}" -+} # func_append may be replaced by extended shell implementation -+ -+# func_append_quoted var value -+# Quote VALUE and append to the end of shell variable VAR, separated -+# by a space. -+func_append_quoted () -+{ -+ func_quote_for_eval "${2}" -+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -+} # func_append_quoted may be replaced by extended shell implementation -+ -+ -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=`expr "${@}"` -+} # func_arith may be replaced by extended shell implementation -+ -+ -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -+} # func_len may be replaced by extended shell implementation -+ -+ -+# func_lo2o object -+func_lo2o () -+{ -+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -+} # func_lo2o may be replaced by extended shell implementation -+ -+ -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -+} # func_xform may be replaced by extended shell implementation -+ -+ - # func_fatal_configuration arg... - # Echo program name prefixed message to standard error, followed by - # a configuration failure hint, and exit. -@@ -636,16 +919,16 @@ - # Display the features supported by this script. - func_features () - { -- $ECHO "host: $host" -+ echo "host: $host" - if test "$build_libtool_libs" = yes; then -- $ECHO "enable shared libraries" -+ echo "enable shared libraries" - else -- $ECHO "disable shared libraries" -+ echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then -- $ECHO "enable static libraries" -+ echo "enable static libraries" - else -- $ECHO "disable static libraries" -+ echo "disable static libraries" - fi - - exit $? -@@ -692,117 +975,209 @@ - esac - } - --# Parse options once, thoroughly. This comes as soon as possible in --# the script to make things like `libtool --version' happen quickly. -+# func_check_version_match -+# Ensure that we are using m4 macros, and libtool script from the same -+# release of libtool. -+func_check_version_match () - { -+ if test "$package_revision" != "$macro_revision"; then -+ if test "$VERSION" != "$macro_version"; then -+ if test -z "$macro_version"; then -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from an older release. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF -+ else -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF -+ fi -+ else -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -+$progname: but the definition of this LT_INIT comes from revision $macro_revision. -+$progname: You should recreate aclocal.m4 with macros from revision $package_revision -+$progname: of $PACKAGE $VERSION and run autoconf again. -+_LT_EOF -+ fi -+ -+ exit $EXIT_MISMATCH -+ fi -+} -+ -+ -+# Shorthand for --mode=foo, only valid as the first argument -+case $1 in -+clean|clea|cle|cl) -+ shift; set dummy --mode clean ${1+"$@"}; shift -+ ;; -+compile|compil|compi|comp|com|co|c) -+ shift; set dummy --mode compile ${1+"$@"}; shift -+ ;; -+execute|execut|execu|exec|exe|ex|e) -+ shift; set dummy --mode execute ${1+"$@"}; shift -+ ;; -+finish|finis|fini|fin|fi|f) -+ shift; set dummy --mode finish ${1+"$@"}; shift -+ ;; -+install|instal|insta|inst|ins|in|i) -+ shift; set dummy --mode install ${1+"$@"}; shift -+ ;; -+link|lin|li|l) -+ shift; set dummy --mode link ${1+"$@"}; shift -+ ;; -+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) -+ shift; set dummy --mode uninstall ${1+"$@"}; shift -+ ;; -+esac - -- # Shorthand for --mode=foo, only valid as the first argument -- case $1 in -- clean|clea|cle|cl) -- shift; set dummy --mode clean ${1+"$@"}; shift -- ;; -- compile|compil|compi|comp|com|co|c) -- shift; set dummy --mode compile ${1+"$@"}; shift -- ;; -- execute|execut|execu|exec|exe|ex|e) -- shift; set dummy --mode execute ${1+"$@"}; shift -- ;; -- finish|finis|fini|fin|fi|f) -- shift; set dummy --mode finish ${1+"$@"}; shift -- ;; -- install|instal|insta|inst|ins|in|i) -- shift; set dummy --mode install ${1+"$@"}; shift -- ;; -- link|lin|li|l) -- shift; set dummy --mode link ${1+"$@"}; shift -- ;; -- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) -- shift; set dummy --mode uninstall ${1+"$@"}; shift -- ;; -- esac - -- # Parse non-mode specific arguments: -- while test "$#" -gt 0; do -+ -+# Option defaults: -+opt_debug=: -+opt_dry_run=false -+opt_config=false -+opt_preserve_dup_deps=false -+opt_features=false -+opt_finish=false -+opt_help=false -+opt_help_all=false -+opt_silent=: -+opt_warning=: -+opt_verbose=: -+opt_silent=false -+opt_verbose=false -+ -+ -+# Parse options once, thoroughly. This comes as soon as possible in the -+# script to make things like `--version' happen as quickly as we can. -+{ -+ # this just eases exit handling -+ while test $# -gt 0; do - opt="$1" - shift -- - case $opt in -- --config) func_config ;; -- -- --debug) preserve_args="$preserve_args $opt" -+ --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" -- opt_debug='set -x' - $opt_debug - ;; -- -- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break -- execute_dlfiles="$execute_dlfiles $1" -- shift -+ --dry-run|--dryrun|-n) -+ opt_dry_run=: - ;; -- -- --dry-run | -n) opt_dry_run=: ;; -- --features) func_features ;; -- --finish) mode="finish" ;; -- -- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break -- case $1 in -- # Valid mode arguments: -- clean) ;; -- compile) ;; -- execute) ;; -- finish) ;; -- install) ;; -- link) ;; -- relink) ;; -- uninstall) ;; -- -- # Catch anything else as an error -- *) func_error "invalid argument for $opt" -- exit_cmd=exit -- break -- ;; -- esac -- -- mode="$1" -+ --config) -+ opt_config=: -+func_config -+ ;; -+ --dlopen|-dlopen) -+ optarg="$1" -+ opt_dlopen="${opt_dlopen+$opt_dlopen -+}$optarg" - shift - ;; -- - --preserve-dup-deps) -- opt_duplicate_deps=: ;; -- -- --quiet|--silent) preserve_args="$preserve_args $opt" -- opt_silent=: -+ opt_preserve_dup_deps=: - ;; -- -- --verbose| -v) preserve_args="$preserve_args $opt" -+ --features) -+ opt_features=: -+func_features -+ ;; -+ --finish) -+ opt_finish=: -+set dummy --mode finish ${1+"$@"}; shift -+ ;; -+ --help) -+ opt_help=: -+ ;; -+ --help-all) -+ opt_help_all=: -+opt_help=': help-all' -+ ;; -+ --mode) -+ test $# = 0 && func_missing_arg $opt && break -+ optarg="$1" -+ opt_mode="$optarg" -+case $optarg in -+ # Valid mode arguments: -+ clean|compile|execute|finish|install|link|relink|uninstall) ;; -+ -+ # Catch anything else as an error -+ *) func_error "invalid argument for $opt" -+ exit_cmd=exit -+ break -+ ;; -+esac -+ shift -+ ;; -+ --no-silent|--no-quiet) - opt_silent=false -+func_append preserve_args " $opt" - ;; -- -- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break -- preserve_args="$preserve_args $opt $1" -- func_enable_tag "$1" # tagname is set here -+ --no-warning|--no-warn) -+ opt_warning=false -+func_append preserve_args " $opt" -+ ;; -+ --no-verbose) -+ opt_verbose=false -+func_append preserve_args " $opt" -+ ;; -+ --silent|--quiet) -+ opt_silent=: -+func_append preserve_args " $opt" -+ opt_verbose=false -+ ;; -+ --verbose|-v) -+ opt_verbose=: -+func_append preserve_args " $opt" -+opt_silent=false -+ ;; -+ --tag) -+ test $# = 0 && func_missing_arg $opt && break -+ optarg="$1" -+ opt_tag="$optarg" -+func_append preserve_args " $opt $optarg" -+func_enable_tag "$optarg" - shift - ;; - -+ -\?|-h) func_usage ;; -+ --help) func_help ;; -+ --version) func_version ;; -+ - # Separate optargs to long options: -- -dlopen=*|--mode=*|--tag=*) -- func_opt_split "$opt" -- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} -+ --*=*) -+ func_split_long_opt "$opt" -+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} - shift - ;; - -- -\?|-h) func_usage ;; -- --help) opt_help=: ;; -- --version) func_version ;; -- -- -*) func_fatal_help "unrecognized option \`$opt'" ;; -- -- *) nonopt="$opt" -- break -+ # Separate non-argument short options: -+ -\?*|-h*|-n*|-v*) -+ func_split_short_opt "$opt" -+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} -+ shift - ;; -+ -+ --) break ;; -+ -*) func_fatal_help "unrecognized option \`$opt'" ;; -+ *) set dummy "$opt" ${1+"$@"}; shift; break ;; - esac - done - -+ # Validate options: -+ -+ # save first non-option argument -+ if test "$#" -gt 0; then -+ nonopt="$opt" -+ shift -+ fi -+ -+ # preserve --debug -+ test "$opt_debug" = : || func_append preserve_args " --debug" - - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) -@@ -810,82 +1185,44 @@ - opt_duplicate_compiler_generated_deps=: - ;; - *) -- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps -+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - -- # Having warned about all mis-specified options, bail out if -- # anything was wrong. -- $exit_cmd $EXIT_FAILURE --} -+ $opt_help || { -+ # Sanity checks first: -+ func_check_version_match - --# func_check_version_match --# Ensure that we are using m4 macros, and libtool script from the same --# release of libtool. --func_check_version_match () --{ -- if test "$package_revision" != "$macro_revision"; then -- if test "$VERSION" != "$macro_version"; then -- if test -z "$macro_version"; then -- cat >&2 <<_LT_EOF --$progname: Version mismatch error. This is $PACKAGE $VERSION, but the --$progname: definition of this LT_INIT comes from an older release. --$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION --$progname: and run autoconf again. --_LT_EOF -- else -- cat >&2 <<_LT_EOF --$progname: Version mismatch error. This is $PACKAGE $VERSION, but the --$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. --$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION --$progname: and run autoconf again. --_LT_EOF -- fi -- else -- cat >&2 <<_LT_EOF --$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, --$progname: but the definition of this LT_INIT comes from revision $macro_revision. --$progname: You should recreate aclocal.m4 with macros from revision $package_revision --$progname: of $PACKAGE $VERSION and run autoconf again. --_LT_EOF -+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -+ func_fatal_configuration "not configured to build any kind of library" - fi - -- exit $EXIT_MISMATCH -- fi --} -- -+ # Darwin sucks -+ eval std_shrext=\"$shrext_cmds\" - --## ----------- ## --## Main. ## --## ----------- ## -- --$opt_help || { -- # Sanity checks first: -- func_check_version_match -- -- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -- func_fatal_configuration "not configured to build any kind of library" -- fi -+ # Only execute mode is allowed to have -dlopen flags. -+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then -+ func_error "unrecognized option \`-dlopen'" -+ $ECHO "$help" 1>&2 -+ exit $EXIT_FAILURE -+ fi - -- test -z "$mode" && func_fatal_error "error: you must specify a MODE." -+ # Change the help message to a mode-specific one. -+ generic_help="$help" -+ help="Try \`$progname --help --mode=$opt_mode' for more information." -+ } - - -- # Darwin sucks -- eval std_shrext=\"$shrext_cmds\" -+ # Bail if the options were screwed -+ $exit_cmd $EXIT_FAILURE -+} - - -- # Only execute mode is allowed to have -dlopen flags. -- if test -n "$execute_dlfiles" && test "$mode" != execute; then -- func_error "unrecognized option \`-dlopen'" -- $ECHO "$help" 1>&2 -- exit $EXIT_FAILURE -- fi - -- # Change the help message to a mode-specific one. -- generic_help="$help" -- help="Try \`$progname --help --mode=$mode' for more information." --} - -+## ----------- ## -+## Main. ## -+## ----------- ## - - # func_lalib_p file - # True iff FILE is a libtool `.la' library or `.lo' object file. -@@ -950,12 +1287,9 @@ - # temporary ltwrapper_script. - func_ltwrapper_scriptname () - { -- func_ltwrapper_scriptname_result="" -- if func_ltwrapper_executable_p "$1"; then -- func_dirname_and_basename "$1" "" "." -- func_stripname '' '.exe' "$func_basename_result" -- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" -- fi -+ func_dirname_and_basename "$1" "" "." -+ func_stripname '' '.exe' "$func_basename_result" -+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - } - - # func_ltwrapper_p file -@@ -1001,6 +1335,37 @@ - } - - -+# func_resolve_sysroot PATH -+# Replace a leading = in PATH with a sysroot. Store the result into -+# func_resolve_sysroot_result -+func_resolve_sysroot () -+{ -+ func_resolve_sysroot_result=$1 -+ case $func_resolve_sysroot_result in -+ =*) -+ func_stripname '=' '' "$func_resolve_sysroot_result" -+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result -+ ;; -+ esac -+} -+ -+# func_replace_sysroot PATH -+# If PATH begins with the sysroot, replace it with = and -+# store the result into func_replace_sysroot_result. -+func_replace_sysroot () -+{ -+ case "$lt_sysroot:$1" in -+ ?*:"$lt_sysroot"*) -+ func_stripname "$lt_sysroot" '' "$1" -+ func_replace_sysroot_result="=$func_stripname_result" -+ ;; -+ *) -+ # Including no sysroot. -+ func_replace_sysroot_result=$1 -+ ;; -+ esac -+} -+ - # func_infer_tag arg - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. -@@ -1013,13 +1378,15 @@ - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do -- func_quote_for_eval "$arg" -- CC_quoted="$CC_quoted $func_quote_for_eval_result" -+ func_append_quoted CC_quoted "$arg" - done -+ CC_expanded=`func_echo_all $CC` -+ CC_quoted_expanded=`func_echo_all $CC_quoted` - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. -- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; -+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ -+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) -@@ -1030,11 +1397,13 @@ - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. -- func_quote_for_eval "$arg" -- CC_quoted="$CC_quoted $func_quote_for_eval_result" -+ func_append_quoted CC_quoted "$arg" - done -+ CC_expanded=`func_echo_all $CC` -+ CC_quoted_expanded=`func_echo_all $CC_quoted` - case "$@ " in -- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) -+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ -+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. -@@ -1097,6 +1466,486 @@ - } - } - -+ -+################################################## -+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # -+################################################## -+ -+# func_convert_core_file_wine_to_w32 ARG -+# Helper function used by file name conversion functions when $build is *nix, -+# and $host is mingw, cygwin, or some other w32 environment. Relies on a -+# correctly configured wine environment available, with the winepath program -+# in $build's $PATH. -+# -+# ARG is the $build file name to be converted to w32 format. -+# Result is available in $func_convert_core_file_wine_to_w32_result, and will -+# be empty on error (or when ARG is empty) -+func_convert_core_file_wine_to_w32 () -+{ -+ $opt_debug -+ func_convert_core_file_wine_to_w32_result="$1" -+ if test -n "$1"; then -+ # Unfortunately, winepath does not exit with a non-zero error code, so we -+ # are forced to check the contents of stdout. On the other hand, if the -+ # command is not found, the shell will set an exit code of 127 and print -+ # *an error message* to stdout. So we must check for both error code of -+ # zero AND non-empty stdout, which explains the odd construction: -+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` -+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then -+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | -+ $SED -e "$lt_sed_naive_backslashify"` -+ else -+ func_convert_core_file_wine_to_w32_result= -+ fi -+ fi -+} -+# end: func_convert_core_file_wine_to_w32 -+ -+ -+# func_convert_core_path_wine_to_w32 ARG -+# Helper function used by path conversion functions when $build is *nix, and -+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -+# configured wine environment available, with the winepath program in $build's -+# $PATH. Assumes ARG has no leading or trailing path separator characters. -+# -+# ARG is path to be converted from $build format to win32. -+# Result is available in $func_convert_core_path_wine_to_w32_result. -+# Unconvertible file (directory) names in ARG are skipped; if no directory names -+# are convertible, then the result may be empty. -+func_convert_core_path_wine_to_w32 () -+{ -+ $opt_debug -+ # unfortunately, winepath doesn't convert paths, only file names -+ func_convert_core_path_wine_to_w32_result="" -+ if test -n "$1"; then -+ oldIFS=$IFS -+ IFS=: -+ for func_convert_core_path_wine_to_w32_f in $1; do -+ IFS=$oldIFS -+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" -+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then -+ if test -z "$func_convert_core_path_wine_to_w32_result"; then -+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" -+ else -+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" -+ fi -+ fi -+ done -+ IFS=$oldIFS -+ fi -+} -+# end: func_convert_core_path_wine_to_w32 -+ -+ -+# func_cygpath ARGS... -+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -+# (2), returns the Cygwin file name or path in func_cygpath_result (input -+# file name or path is assumed to be in w32 format, as previously converted -+# from $build's *nix or MSYS format). In case (3), returns the w32 file name -+# or path in func_cygpath_result (input file name or path is assumed to be in -+# Cygwin format). Returns an empty string on error. -+# -+# ARGS are passed to cygpath, with the last one being the file name or path to -+# be converted. -+# -+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -+# environment variable; do not put it in $PATH. -+func_cygpath () -+{ -+ $opt_debug -+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then -+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` -+ if test "$?" -ne 0; then -+ # on failure, ensure result is empty -+ func_cygpath_result= -+ fi -+ else -+ func_cygpath_result= -+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" -+ fi -+} -+#end: func_cygpath -+ -+ -+# func_convert_core_msys_to_w32 ARG -+# Convert file name or path ARG from MSYS format to w32 format. Return -+# result in func_convert_core_msys_to_w32_result. -+func_convert_core_msys_to_w32 () -+{ -+ $opt_debug -+ # awkward: cmd appends spaces to result -+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | -+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -+} -+#end: func_convert_core_msys_to_w32 -+ -+ -+# func_convert_file_check ARG1 ARG2 -+# Verify that ARG1 (a file name in $build format) was converted to $host -+# format in ARG2. Otherwise, emit an error message, but continue (resetting -+# func_to_host_file_result to ARG1). -+func_convert_file_check () -+{ -+ $opt_debug -+ if test -z "$2" && test -n "$1" ; then -+ func_error "Could not determine host file name corresponding to" -+ func_error " \`$1'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback: -+ func_to_host_file_result="$1" -+ fi -+} -+# end func_convert_file_check -+ -+ -+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -+# Verify that FROM_PATH (a path in $build format) was converted to $host -+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -+# func_to_host_file_result to a simplistic fallback value (see below). -+func_convert_path_check () -+{ -+ $opt_debug -+ if test -z "$4" && test -n "$3"; then -+ func_error "Could not determine the host path corresponding to" -+ func_error " \`$3'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback. This is a deliberately simplistic "conversion" and -+ # should not be "improved". See libtool.info. -+ if test "x$1" != "x$2"; then -+ lt_replace_pathsep_chars="s|$1|$2|g" -+ func_to_host_path_result=`echo "$3" | -+ $SED -e "$lt_replace_pathsep_chars"` -+ else -+ func_to_host_path_result="$3" -+ fi -+ fi -+} -+# end func_convert_path_check -+ -+ -+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -+# and appending REPL if ORIG matches BACKPAT. -+func_convert_path_front_back_pathsep () -+{ -+ $opt_debug -+ case $4 in -+ $1 ) func_to_host_path_result="$3$func_to_host_path_result" -+ ;; -+ esac -+ case $4 in -+ $2 ) func_append func_to_host_path_result "$3" -+ ;; -+ esac -+} -+# end func_convert_path_front_back_pathsep -+ -+ -+################################################## -+# $build to $host FILE NAME CONVERSION FUNCTIONS # -+################################################## -+# invoked via `$to_host_file_cmd ARG' -+# -+# In each case, ARG is the path to be converted from $build to $host format. -+# Result will be available in $func_to_host_file_result. -+ -+ -+# func_to_host_file ARG -+# Converts the file name ARG from $build format to $host format. Return result -+# in func_to_host_file_result. -+func_to_host_file () -+{ -+ $opt_debug -+ $to_host_file_cmd "$1" -+} -+# end func_to_host_file -+ -+ -+# func_to_tool_file ARG LAZY -+# converts the file name ARG from $build format to toolchain format. Return -+# result in func_to_tool_file_result. If the conversion in use is listed -+# in (the comma separated) LAZY, no conversion takes place. -+func_to_tool_file () -+{ -+ $opt_debug -+ case ,$2, in -+ *,"$to_tool_file_cmd",*) -+ func_to_tool_file_result=$1 -+ ;; -+ *) -+ $to_tool_file_cmd "$1" -+ func_to_tool_file_result=$func_to_host_file_result -+ ;; -+ esac -+} -+# end func_to_tool_file -+ -+ -+# func_convert_file_noop ARG -+# Copy ARG to func_to_host_file_result. -+func_convert_file_noop () -+{ -+ func_to_host_file_result="$1" -+} -+# end func_convert_file_noop -+ -+ -+# func_convert_file_msys_to_w32 ARG -+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -+# conversion to w32 is not available inside the cwrapper. Returns result in -+# func_to_host_file_result. -+func_convert_file_msys_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_msys_to_w32 "$1" -+ func_to_host_file_result="$func_convert_core_msys_to_w32_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_msys_to_w32 -+ -+ -+# func_convert_file_cygwin_to_w32 ARG -+# Convert file name ARG from Cygwin to w32 format. Returns result in -+# func_to_host_file_result. -+func_convert_file_cygwin_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use -+ # LT_CYGPATH in this case. -+ func_to_host_file_result=`cygpath -m "$1"` -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_cygwin_to_w32 -+ -+ -+# func_convert_file_nix_to_w32 ARG -+# Convert file name ARG from *nix to w32 format. Requires a wine environment -+# and a working winepath. Returns result in func_to_host_file_result. -+func_convert_file_nix_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_file_wine_to_w32 "$1" -+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_nix_to_w32 -+ -+ -+# func_convert_file_msys_to_cygwin ARG -+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -+# Returns result in func_to_host_file_result. -+func_convert_file_msys_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_msys_to_w32 "$1" -+ func_cygpath -u "$func_convert_core_msys_to_w32_result" -+ func_to_host_file_result="$func_cygpath_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_msys_to_cygwin -+ -+ -+# func_convert_file_nix_to_cygwin ARG -+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -+# in func_to_host_file_result. -+func_convert_file_nix_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. -+ func_convert_core_file_wine_to_w32 "$1" -+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result" -+ func_to_host_file_result="$func_cygpath_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_nix_to_cygwin -+ -+ -+############################################# -+# $build to $host PATH CONVERSION FUNCTIONS # -+############################################# -+# invoked via `$to_host_path_cmd ARG' -+# -+# In each case, ARG is the path to be converted from $build to $host format. -+# The result will be available in $func_to_host_path_result. -+# -+# Path separators are also converted from $build format to $host format. If -+# ARG begins or ends with a path separator character, it is preserved (but -+# converted to $host format) on output. -+# -+# All path conversion functions are named using the following convention: -+# file name conversion function : func_convert_file_X_to_Y () -+# path conversion function : func_convert_path_X_to_Y () -+# where, for any given $build/$host combination the 'X_to_Y' value is the -+# same. If conversion functions are added for new $build/$host combinations, -+# the two new functions must follow this pattern, or func_init_to_host_path_cmd -+# will break. -+ -+ -+# func_init_to_host_path_cmd -+# Ensures that function "pointer" variable $to_host_path_cmd is set to the -+# appropriate value, based on the value of $to_host_file_cmd. -+to_host_path_cmd= -+func_init_to_host_path_cmd () -+{ -+ $opt_debug -+ if test -z "$to_host_path_cmd"; then -+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd" -+ to_host_path_cmd="func_convert_path_${func_stripname_result}" -+ fi -+} -+ -+ -+# func_to_host_path ARG -+# Converts the path ARG from $build format to $host format. Return result -+# in func_to_host_path_result. -+func_to_host_path () -+{ -+ $opt_debug -+ func_init_to_host_path_cmd -+ $to_host_path_cmd "$1" -+} -+# end func_to_host_path -+ -+ -+# func_convert_path_noop ARG -+# Copy ARG to func_to_host_path_result. -+func_convert_path_noop () -+{ -+ func_to_host_path_result="$1" -+} -+# end func_convert_path_noop -+ -+ -+# func_convert_path_msys_to_w32 ARG -+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -+# conversion to w32 is not available inside the cwrapper. Returns result in -+# func_to_host_path_result. -+func_convert_path_msys_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # Remove leading and trailing path separator characters from ARG. MSYS -+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; -+ # and winepath ignores them completely. -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" -+ func_to_host_path_result="$func_convert_core_msys_to_w32_result" -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_msys_to_w32 -+ -+ -+# func_convert_path_cygwin_to_w32 ARG -+# Convert path ARG from Cygwin to w32 format. Returns result in -+# func_to_host_file_result. -+func_convert_path_cygwin_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_cygwin_to_w32 -+ -+ -+# func_convert_path_nix_to_w32 ARG -+# Convert path ARG from *nix to w32 format. Requires a wine environment and -+# a working winepath. Returns result in func_to_host_file_result. -+func_convert_path_nix_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" -+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_nix_to_w32 -+ -+ -+# func_convert_path_msys_to_cygwin ARG -+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -+# Returns result in func_to_host_file_result. -+func_convert_path_msys_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" -+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result" -+ func_to_host_path_result="$func_cygpath_result" -+ func_convert_path_check : : \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" : "$1" -+ fi -+} -+# end func_convert_path_msys_to_cygwin -+ -+ -+# func_convert_path_nix_to_cygwin ARG -+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -+# func_to_host_file_result. -+func_convert_path_nix_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # Remove leading and trailing path separator characters from -+ # ARG. msys behavior is inconsistent here, cygpath turns them -+ # into '.;' and ';.', and winepath ignores them completely. -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" -+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" -+ func_to_host_path_result="$func_cygpath_result" -+ func_convert_path_check : : \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" : "$1" -+ fi -+} -+# end func_convert_path_nix_to_cygwin -+ -+ - # func_mode_compile arg... - func_mode_compile () - { -@@ -1137,12 +1986,12 @@ - ;; - - -pie | -fpie | -fPIE) -- pie_flag="$pie_flag $arg" -+ func_append pie_flag " $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) -- later="$later $arg" -+ func_append later " $arg" - continue - ;; - -@@ -1163,15 +2012,14 @@ - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" -- func_quote_for_eval "$arg" -- lastarg="$lastarg $func_quote_for_eval_result" -+ func_append_quoted lastarg "$arg" - done - IFS="$save_ifs" - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. -- base_compile="$base_compile $lastarg" -+ func_append base_compile " $lastarg" - continue - ;; - -@@ -1187,8 +2035,7 @@ - esac # case $arg_mode - - # Aesthetically quote the previous argument. -- func_quote_for_eval "$lastarg" -- base_compile="$base_compile $func_quote_for_eval_result" -+ func_append_quoted base_compile "$lastarg" - done # for arg - - case $arg_mode in -@@ -1213,7 +2060,7 @@ - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ -- *.[fF][09]? | *.for | *.java | *.obj | *.sx) -+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) - func_xform "$libobj" - libobj=$func_xform_result - ;; -@@ -1288,7 +2135,7 @@ - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then -- output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} -+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - else - output_obj= -@@ -1319,17 +2166,16 @@ - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi -- removelist="$removelist $output_obj" -+ func_append removelist " $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist -- removelist="$removelist $lockfile" -+ func_append removelist " $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - -- if test -n "$fix_srcfile_path"; then -- eval srcfile=\"$fix_srcfile_path\" -- fi -+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 -+ srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - -@@ -1349,7 +2195,7 @@ - - if test -z "$output_obj"; then - # Place PIC objects in $objdir -- command="$command -o $lobj" -+ func_append command " -o $lobj" - fi - - func_show_eval_locale "$command" \ -@@ -1396,11 +2242,11 @@ - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then -- command="$command -o $obj" -+ func_append command " -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. -- command="$command$suppress_output" -+ func_append command "$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - -@@ -1445,13 +2291,13 @@ - } - - $opt_help || { --test "$mode" = compile && func_mode_compile ${1+"$@"} -+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"} - } - - func_mode_help () - { - # We need to display help for each of the modes. -- case $mode in -+ case $opt_mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. -@@ -1482,10 +2328,11 @@ - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes -- -prefer-pic try to building PIC objects only -- -prefer-non-pic try to building non-PIC objects only -+ -prefer-pic try to build PIC objects only -+ -prefer-non-pic try to build non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking -+ -Wc,FLAG pass FLAG directly to the compiler - - COMPILE-COMMAND is a command to be used in creating a \`standard' object file - from the given SOURCEFILE. -@@ -1538,7 +2385,7 @@ - - The following components of INSTALL-COMMAND are treated specially: - -- -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation -+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - - The rest of the components are interpreted as arguments to that command (only - BSD-compatible install options are recognized)." -@@ -1558,6 +2405,8 @@ - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible -+ -bindir BINDIR specify path to binaries directory (for systems where -+ libraries must be found in the PATH setting at runtime) - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -@@ -1586,6 +2435,11 @@ - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface -+ -Wc,FLAG -+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -+ -Wl,FLAG -+ -Xlinker FLAG pass linker-specific FLAG directly to the linker -+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - - All other options (arguments beginning with \`-') are ignored. - -@@ -1619,18 +2473,44 @@ - ;; - - *) -- func_fatal_help "invalid operation mode \`$mode'" -+ func_fatal_help "invalid operation mode \`$opt_mode'" - ;; - esac - -- $ECHO -+ echo - $ECHO "Try \`$progname --help' for more information about other modes." -- -- exit $? - } - -- # Now that we've collected a possible --mode arg, show help if necessary -- $opt_help && func_mode_help -+# Now that we've collected a possible --mode arg, show help if necessary -+if $opt_help; then -+ if test "$opt_help" = :; then -+ func_mode_help -+ else -+ { -+ func_help noexit -+ for opt_mode in compile link execute install finish uninstall clean; do -+ func_mode_help -+ done -+ } | sed -n '1p; 2,$s/^Usage:/ or: /p' -+ { -+ func_help noexit -+ for opt_mode in compile link execute install finish uninstall clean; do -+ echo -+ func_mode_help -+ done -+ } | -+ sed '1d -+ /^When reporting/,/^Report/{ -+ H -+ d -+ } -+ $x -+ /information about other modes/d -+ /more detailed .*MODE/d -+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' -+ fi -+ exit $? -+fi - - - # func_mode_execute arg... -@@ -1643,13 +2523,16 @@ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. -- for file in $execute_dlfiles; do -+ for file in $opt_dlopen; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) -+ func_resolve_sysroot "$file" -+ file=$func_resolve_sysroot_result -+ - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" -@@ -1671,7 +2554,7 @@ - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then -- dir="$dir/$objdir" -+ func_append dir "/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" -@@ -1712,7 +2595,7 @@ - for file - do - case $file in -- -*) ;; -+ -* | *.la | *.lo ) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then -@@ -1728,8 +2611,7 @@ - ;; - esac - # Quote arguments (to preserve shell metacharacters). -- func_quote_for_eval "$file" -- args="$args $func_quote_for_eval_result" -+ func_append_quoted args "$file" - done - - if test "X$opt_dry_run" = Xfalse; then -@@ -1754,29 +2636,66 @@ - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" -- $ECHO "export $shlibpath_var" -+ echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi - } - --test "$mode" = execute && func_mode_execute ${1+"$@"} -+test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - - - # func_mode_finish arg... - func_mode_finish () - { - $opt_debug -- libdirs="$nonopt" -+ libs= -+ libdirs= - admincmds= - -- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -- for dir -- do -- libdirs="$libdirs $dir" -- done -+ for opt in "$nonopt" ${1+"$@"} -+ do -+ if test -d "$opt"; then -+ func_append libdirs " $opt" - -+ elif test -f "$opt"; then -+ if func_lalib_unsafe_p "$opt"; then -+ func_append libs " $opt" -+ else -+ func_warning "\`$opt' is not a valid libtool archive" -+ fi -+ -+ else -+ func_fatal_error "invalid argument \`$opt'" -+ fi -+ done -+ -+ if test -n "$libs"; then -+ if test -n "$lt_sysroot"; then -+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` -+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" -+ else -+ sysroot_cmd= -+ fi -+ -+ # Remove sysroot references -+ if $opt_dry_run; then -+ for lib in $libs; do -+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib" -+ done -+ else -+ tmpdir=`func_mktempdir` -+ for lib in $libs; do -+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ -+ > $tmpdir/tmp-la -+ mv -f $tmpdir/tmp-la $lib -+ done -+ ${RM}r "$tmpdir" -+ fi -+ fi -+ -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. -@@ -1786,7 +2705,7 @@ - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" -- $opt_dry_run || eval "$cmds" || admincmds="$admincmds -+ $opt_dry_run || eval "$cmds" || func_append admincmds " - $cmds" - fi - done -@@ -1795,53 +2714,55 @@ - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - -- $ECHO "X----------------------------------------------------------------------" | $Xsed -- $ECHO "Libraries have been installed in:" -- for libdir in $libdirs; do -- $ECHO " $libdir" -- done -- $ECHO -- $ECHO "If you ever happen to want to link against installed libraries" -- $ECHO "in a given directory, LIBDIR, you must either use libtool, and" -- $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" -- $ECHO "flag during linking and do at least one of the following:" -- if test -n "$shlibpath_var"; then -- $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" -- $ECHO " during execution" -- fi -- if test -n "$runpath_var"; then -- $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" -- $ECHO " during linking" -- fi -- if test -n "$hardcode_libdir_flag_spec"; then -- libdir=LIBDIR -- eval flag=\"$hardcode_libdir_flag_spec\" -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -+ echo "----------------------------------------------------------------------" -+ echo "Libraries have been installed in:" -+ for libdir in $libdirs; do -+ $ECHO " $libdir" -+ done -+ echo -+ echo "If you ever happen to want to link against installed libraries" -+ echo "in a given directory, LIBDIR, you must either use libtool, and" -+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'" -+ echo "flag during linking and do at least one of the following:" -+ if test -n "$shlibpath_var"; then -+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable" -+ echo " during execution" -+ fi -+ if test -n "$runpath_var"; then -+ echo " - add LIBDIR to the \`$runpath_var' environment variable" -+ echo " during linking" -+ fi -+ if test -n "$hardcode_libdir_flag_spec"; then -+ libdir=LIBDIR -+ eval flag=\"$hardcode_libdir_flag_spec\" - -- $ECHO " - use the \`$flag' linker flag" -- fi -- if test -n "$admincmds"; then -- $ECHO " - have your system administrator run these commands:$admincmds" -- fi -- if test -f /etc/ld.so.conf; then -- $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -- fi -- $ECHO -+ $ECHO " - use the \`$flag' linker flag" -+ fi -+ if test -n "$admincmds"; then -+ $ECHO " - have your system administrator run these commands:$admincmds" -+ fi -+ if test -f /etc/ld.so.conf; then -+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -+ fi -+ echo - -- $ECHO "See any operating system documentation about shared libraries for" -- case $host in -- solaris2.[6789]|solaris2.1[0-9]) -- $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" -- $ECHO "pages." -- ;; -- *) -- $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." -- ;; -- esac -- $ECHO "X----------------------------------------------------------------------" | $Xsed -+ echo "See any operating system documentation about shared libraries for" -+ case $host in -+ solaris2.[6789]|solaris2.1[0-9]) -+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" -+ echo "pages." -+ ;; -+ *) -+ echo "more information, such as the ld(1) and ld.so(8) manual pages." -+ ;; -+ esac -+ echo "----------------------------------------------------------------------" -+ fi - exit $EXIT_SUCCESS - } - --test "$mode" = finish && func_mode_finish ${1+"$@"} -+test "$opt_mode" = finish && func_mode_finish ${1+"$@"} - - - # func_mode_install arg... -@@ -1852,7 +2773,7 @@ - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. -- $ECHO "X$nonopt" | $GREP shtool >/dev/null; then -+ case $nonopt in *shtool*) :;; *) false;; esac; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " -@@ -1866,7 +2787,12 @@ - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" -- install_prog="$install_prog$func_quote_for_eval_result" -+ func_append install_prog "$func_quote_for_eval_result" -+ install_shared_prog=$install_prog -+ case " $install_prog " in -+ *[\\\ /]cp\ *) install_cp=: ;; -+ *) install_cp=false ;; -+ esac - - # We need to accept at least all the BSD install flags. - dest= -@@ -1876,10 +2802,12 @@ - install_type= - isdir=no - stripme= -+ no_mode=: - for arg - do -+ arg2= - if test -n "$dest"; then -- files="$files $dest" -+ func_append files " $dest" - dest=$arg - continue - fi -@@ -1887,10 +2815,9 @@ - case $arg in - -d) isdir=yes ;; - -f) -- case " $install_prog " in -- *[\\\ /]cp\ *) ;; -- *) prev=$arg ;; -- esac -+ if $install_cp; then :; else -+ prev=$arg -+ fi - ;; - -g | -m | -o) - prev=$arg -@@ -1904,6 +2831,10 @@ - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then -+ if test "x$prev" = x-m && test -n "$install_override_mode"; then -+ arg2=$install_override_mode -+ no_mode=false -+ fi - prev= - else - dest=$arg -@@ -1914,7 +2845,11 @@ - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" -- install_prog="$install_prog $func_quote_for_eval_result" -+ func_append install_prog " $func_quote_for_eval_result" -+ if test -n "$arg2"; then -+ func_quote_for_eval "$arg2" -+ fi -+ func_append install_shared_prog " $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ -@@ -1923,6 +2858,13 @@ - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - -+ if test -n "$install_override_mode" && $no_mode; then -+ if $install_cp; then :; else -+ func_quote_for_eval "$install_override_mode" -+ func_append install_shared_prog " -m $func_quote_for_eval_result" -+ fi -+ fi -+ - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" -@@ -1977,10 +2919,13 @@ - case $file in - *.$libext) - # Do the static libraries later. -- staticlibs="$staticlibs $file" -+ func_append staticlibs " $file" - ;; - - *.la) -+ func_resolve_sysroot "$file" -+ file=$func_resolve_sysroot_result -+ - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" -@@ -1994,23 +2939,23 @@ - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; -- *) current_libdirs="$current_libdirs $libdir" ;; -+ *) func_append current_libdirs " $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; -- *) future_libdirs="$future_libdirs $libdir" ;; -+ *) func_append future_libdirs " $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" -- dir="$dir$objdir" -+ func_append dir "$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. -- inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` -+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that -@@ -2023,9 +2968,9 @@ - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. -- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` -+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else -- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` -+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" -@@ -2043,7 +2988,7 @@ - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. -- func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ -+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in -@@ -2083,7 +3028,7 @@ - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. -- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" -+ test -n "$old_library" && func_append staticlibs " $dir/$old_library" - ;; - - *.lo) -@@ -2183,7 +3128,7 @@ - if test -f "$lib"; then - func_source "$lib" - fi -- libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test -+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no -@@ -2202,7 +3147,7 @@ - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. -- relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` -+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" -@@ -2221,7 +3166,7 @@ - } - else - # Install the binary that we compiled earlier. -- file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` -+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - -@@ -2257,11 +3202,13 @@ - - # Set up the ranlib parameters. - oldlib="$destdir/$name" -+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 -+ tool_oldlib=$func_to_tool_file_result - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then -- func_show_eval "$old_striplib $oldlib" 'exit $?' -+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. -@@ -2280,7 +3227,7 @@ - fi - } - --test "$mode" = install && func_mode_install ${1+"$@"} -+test "$opt_mode" = install && func_mode_install ${1+"$@"} - - - # func_generate_dlsyms outputname originator pic_p -@@ -2323,6 +3270,22 @@ - extern \"C\" { - #endif - -+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -+#endif -+ -+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -+/* DATA imports from DLLs on WIN32 con't be const, because runtime -+ relocations are performed -- see ld's documentation on pseudo-relocs. */ -+# define LT_DLSYM_CONST -+#elif defined(__osf__) -+/* This system does not cope well with relocations in const data. */ -+# define LT_DLSYM_CONST -+#else -+# define LT_DLSYM_CONST const -+#endif -+ - /* External symbol declarations for the compiler. */\ - " - -@@ -2332,10 +3295,11 @@ - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. -- progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` - for progfile in $progfiles; do -- func_verbose "extracting global C symbols from \`$progfile'" -- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" -+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32 -+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" -+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then -@@ -2371,7 +3335,7 @@ - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in -- *cygwin | *mingw* | *cegcc* ) -+ *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; -@@ -2384,10 +3348,52 @@ - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" -- $opt_dry_run || { -- eval '$ECHO ": $name " >> "$nlist"' -- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" -- } -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ # if an import library, we need to obtain dlname -+ if func_win32_import_lib_p "$dlprefile"; then -+ func_tr_sh "$dlprefile" -+ eval "curr_lafile=\$libfile_$func_tr_sh_result" -+ dlprefile_dlbasename="" -+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then -+ # Use subshell, to avoid clobbering current variable values -+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` -+ if test -n "$dlprefile_dlname" ; then -+ func_basename "$dlprefile_dlname" -+ dlprefile_dlbasename="$func_basename_result" -+ else -+ # no lafile. user explicitly requested -dlpreopen <import library>. -+ $sharedlib_from_linklib_cmd "$dlprefile" -+ dlprefile_dlbasename=$sharedlib_from_linklib_result -+ fi -+ fi -+ $opt_dry_run || { -+ if test -n "$dlprefile_dlbasename" ; then -+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' -+ else -+ func_warning "Could not compute DLL name from $name" -+ eval '$ECHO ": $name " >> "$nlist"' -+ fi -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | -+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" -+ } -+ else # not an import lib -+ $opt_dry_run || { -+ eval '$ECHO ": $name " >> "$nlist"' -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" -+ } -+ fi -+ ;; -+ *) -+ $opt_dry_run || { -+ eval '$ECHO ": $name " >> "$nlist"' -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" -+ } -+ ;; -+ esac - done - - $opt_dry_run || { -@@ -2415,36 +3421,19 @@ - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else -- $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" -+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - -- $ECHO >> "$output_objdir/$my_dlsyms" "\ -+ echo >> "$output_objdir/$my_dlsyms" "\ - - /* The mapping between symbol names and symbols. */ - typedef struct { - const char *name; - void *address; - } lt_dlsymlist; --" -- case $host in -- *cygwin* | *mingw* | *cegcc* ) -- $ECHO >> "$output_objdir/$my_dlsyms" "\ --/* DATA imports from DLLs on WIN32 con't be const, because -- runtime relocations are performed -- see ld's documentation -- on pseudo-relocs. */" -- lt_dlsym_const= ;; -- *osf5*) -- echo >> "$output_objdir/$my_dlsyms" "\ --/* This system does not cope well with relocations in const data */" -- lt_dlsym_const= ;; -- *) -- lt_dlsym_const=const ;; -- esac -- -- $ECHO >> "$output_objdir/$my_dlsyms" "\ --extern $lt_dlsym_const lt_dlsymlist -+extern LT_DLSYM_CONST lt_dlsymlist - lt_${my_prefix}_LTX_preloaded_symbols[]; --$lt_dlsym_const lt_dlsymlist -+LT_DLSYM_CONST lt_dlsymlist - lt_${my_prefix}_LTX_preloaded_symbols[] = - {\ - { \"$my_originator\", (void *) 0 }," -@@ -2457,7 +3446,7 @@ - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac -- $ECHO >> "$output_objdir/$my_dlsyms" "\ -+ echo >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} - }; - -@@ -2484,7 +3473,7 @@ - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; -@@ -2500,7 +3489,7 @@ - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; -- *) symtab_cflags="$symtab_cflags $arg" ;; -+ *) func_append symtab_cflags " $arg" ;; - esac - done - -@@ -2515,16 +3504,16 @@ - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then -- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else -- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) -- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; -@@ -2538,8 +3527,8 @@ - # really was required. - - # Nullify the symbol file. -- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` -- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` -+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` - fi - } - -@@ -2549,6 +3538,7 @@ - # Need a lot of goo to handle *both* DLLs and import libs - # Has to be a shell function in order to 'eat' the argument - # that is supplied when $file_magic_command is called. -+# Despite the name, also deal with 64 bit binaries. - func_win32_libid () - { - $opt_debug -@@ -2559,9 +3549,11 @@ - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static -+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | -- $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then -- win32_nmres=`eval $NM -f posix -A $1 | -+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' - 1,100{ - / I /{ -@@ -2590,6 +3582,131 @@ - $ECHO "$win32_libid_type" - } - -+# func_cygming_dll_for_implib ARG -+# -+# Platform-specific function to extract the -+# name of the DLL associated with the specified -+# import library ARG. -+# Invoked by eval'ing the libtool variable -+# $sharedlib_from_linklib_cmd -+# Result is available in the variable -+# $sharedlib_from_linklib_result -+func_cygming_dll_for_implib () -+{ -+ $opt_debug -+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -+} -+ -+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -+# -+# The is the core of a fallback implementation of a -+# platform-specific function to extract the name of the -+# DLL associated with the specified import library LIBNAME. -+# -+# SECTION_NAME is either .idata$6 or .idata$7, depending -+# on the platform and compiler that created the implib. -+# -+# Echos the name of the DLL associated with the -+# specified import library. -+func_cygming_dll_for_implib_fallback_core () -+{ -+ $opt_debug -+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` -+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null | -+ $SED '/^Contents of section '"$match_literal"':/{ -+ # Place marker at beginning of archive member dllname section -+ s/.*/====MARK====/ -+ p -+ d -+ } -+ # These lines can sometimes be longer than 43 characters, but -+ # are always uninteresting -+ /:[ ]*file format pe[i]\{,1\}-/d -+ /^In archive [^:]*:/d -+ # Ensure marker is printed -+ /^====MARK====/p -+ # Remove all lines with less than 43 characters -+ /^.\{43\}/!d -+ # From remaining lines, remove first 43 characters -+ s/^.\{43\}//' | -+ $SED -n ' -+ # Join marker and all lines until next marker into a single line -+ /^====MARK====/ b para -+ H -+ $ b para -+ b -+ :para -+ x -+ s/\n//g -+ # Remove the marker -+ s/^====MARK====// -+ # Remove trailing dots and whitespace -+ s/[\. \t]*$// -+ # Print -+ /./p' | -+ # we now have a list, one entry per line, of the stringified -+ # contents of the appropriate section of all members of the -+ # archive which possess that section. Heuristic: eliminate -+ # all those which have a first or second character that is -+ # a '.' (that is, objdump's representation of an unprintable -+ # character.) This should work for all archives with less than -+ # 0x302f exports -- but will fail for DLLs whose name actually -+ # begins with a literal '.' or a single character followed by -+ # a '.'. -+ # -+ # Of those that remain, print the first one. -+ $SED -e '/^\./d;/^.\./d;q' -+} -+ -+# func_cygming_gnu_implib_p ARG -+# This predicate returns with zero status (TRUE) if -+# ARG is a GNU/binutils-style import library. Returns -+# with nonzero status (FALSE) otherwise. -+func_cygming_gnu_implib_p () -+{ -+ $opt_debug -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` -+ test -n "$func_cygming_gnu_implib_tmp" -+} -+ -+# func_cygming_ms_implib_p ARG -+# This predicate returns with zero status (TRUE) if -+# ARG is an MS-style import library. Returns -+# with nonzero status (FALSE) otherwise. -+func_cygming_ms_implib_p () -+{ -+ $opt_debug -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` -+ test -n "$func_cygming_ms_implib_tmp" -+} -+ -+# func_cygming_dll_for_implib_fallback ARG -+# Platform-specific function to extract the -+# name of the DLL associated with the specified -+# import library ARG. -+# -+# This fallback implementation is for use when $DLLTOOL -+# does not support the --identify-strict option. -+# Invoked by eval'ing the libtool variable -+# $sharedlib_from_linklib_cmd -+# Result is available in the variable -+# $sharedlib_from_linklib_result -+func_cygming_dll_for_implib_fallback () -+{ -+ $opt_debug -+ if func_cygming_gnu_implib_p "$1" ; then -+ # binutils import library -+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` -+ elif func_cygming_ms_implib_p "$1" ; then -+ # ms-generated import library -+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` -+ else -+ # unknown -+ sharedlib_from_linklib_result="" -+ fi -+} - - - # func_extract_an_archive dir oldlib -@@ -2598,7 +3715,18 @@ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" -- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' -+ if test "$lock_old_archive_extraction" = yes; then -+ lockfile=$f_ex_an_ar_oldlib.lock -+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do -+ func_echo "Waiting for $lockfile to be removed" -+ sleep 2 -+ done -+ fi -+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ -+ 'stat=$?; rm -f "$lockfile"; exit $stat' -+ if test "$lock_old_archive_extraction" = yes; then -+ $opt_dry_run || rm -f "$lockfile" -+ fi - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else -@@ -2669,7 +3797,7 @@ - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do -- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` -+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ -@@ -2684,25 +3812,30 @@ - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac -- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` -+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" - } - - -- --# func_emit_wrapper_part1 [arg=no] -+# func_emit_wrapper [arg=no] - # --# Emit the first part of a libtool wrapper script on stdout. --# For more information, see the description associated with --# func_emit_wrapper(), below. --func_emit_wrapper_part1 () --{ -- func_emit_wrapper_part1_arg1=no -- if test -n "$1" ; then -- func_emit_wrapper_part1_arg1=$1 -- fi -+# Emit a libtool wrapper script on stdout. -+# Don't directly open a file because we may want to -+# incorporate the script contents within a cygwin/mingw -+# wrapper executable. Must ONLY be called from within -+# func_mode_link because it depends on a number of variables -+# set therein. -+# -+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -+# variable will take. If 'yes', then the emitted script -+# will assume that the directory in which it is stored is -+# the $objdir directory. This is a cygwin/mingw-specific -+# behavior. -+func_emit_wrapper () -+{ -+ func_emit_wrapper_arg1=${1-no} - - $ECHO "\ - #! $SHELL -@@ -2718,7 +3851,6 @@ - - # Sed substitution that helps us do robust quoting. It backslashifies - # metacharacters that are still active within double-quoted strings. --Xsed='${SED} -e 1s/^X//' - sed_quote_subst='$sed_quote_subst' - - # Be Bourne compatible -@@ -2749,31 +3881,135 @@ - else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then -- ECHO=\"$qecho\" -- file=\"\$0\" -- # Make sure echo works. -- if test \"X\$1\" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift -- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then -- # Yippee, \$ECHO works! -- : -- else -- # Restart under the correct shell, and then maybe \$ECHO will work. -- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -- fi -- fi\ -+ file=\"\$0\"" -+ -+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` -+ $ECHO "\ -+ -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+\$1 -+_LTECHO_EOF' -+} -+ ECHO=\"$qECHO\" -+ fi -+ -+# Very basic option parsing. These options are (a) specific to -+# the libtool wrapper, (b) are identical between the wrapper -+# /script/ and the wrapper /executable/ which is used only on -+# windows platforms, and (c) all begin with the string "--lt-" -+# (application programs are unlikely to have options which match -+# this pattern). -+# -+# There are only two supported options: --lt-debug and -+# --lt-dump-script. There is, deliberately, no --lt-help. -+# -+# The first argument to this parsing function should be the -+# script's $0 value, followed by "$@". -+lt_option_debug= -+func_parse_lt_options () -+{ -+ lt_script_arg0=\$0 -+ shift -+ for lt_opt -+ do -+ case \"\$lt_opt\" in -+ --lt-debug) lt_option_debug=1 ;; -+ --lt-dump-script) -+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` -+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. -+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` -+ cat \"\$lt_dump_D/\$lt_dump_F\" -+ exit 0 -+ ;; -+ --lt-*) -+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ -+ # Print the debug banner immediately: -+ if test -n \"\$lt_option_debug\"; then -+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 -+ fi -+} -+ -+# Used when --lt-debug. Prints its arguments to stdout -+# (redirection is the responsibility of the caller) -+func_lt_dump_args () -+{ -+ lt_dump_args_N=1; -+ for lt_arg -+ do -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" -+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` -+ done -+} -+ -+# Core function for launching the target application -+func_exec_program_core () -+{ - " -- $ECHO "\ -+ case $host in -+ # Backslashes separate directories on plain windows -+ *-*-mingw | *-*-os2* | *-cegcc*) -+ $ECHO "\ -+ if test -n \"\$lt_option_debug\"; then -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 -+ func_lt_dump_args \${1+\"\$@\"} 1>&2 -+ fi -+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -+" -+ ;; -+ -+ *) -+ $ECHO "\ -+ if test -n \"\$lt_option_debug\"; then -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 -+ func_lt_dump_args \${1+\"\$@\"} 1>&2 -+ fi -+ exec \"\$progdir/\$program\" \${1+\"\$@\"} -+" -+ ;; -+ esac -+ $ECHO "\ -+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 -+ exit 1 -+} -+ -+# A function to encapsulate launching the target application -+# Strips options in the --lt-* namespace from \$@ and -+# launches target application with the remaining arguments. -+func_exec_program () -+{ -+ case \" \$* \" in -+ *\\ --lt-*) -+ for lt_wr_arg -+ do -+ case \$lt_wr_arg in -+ --lt-*) ;; -+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; -+ esac -+ shift -+ done ;; -+ esac -+ func_exec_program_core \${1+\"\$@\"} -+} -+ -+ # Parse options -+ func_parse_lt_options \"\$0\" \${1+\"\$@\"} - - # Find the directory that this script lives in. -- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. -- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` -+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` - while test -n \"\$file\"; do -- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then -@@ -2783,30 +4019,13 @@ - esac - fi - -- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` -+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` -+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` - done --" --} --# end: func_emit_wrapper_part1 -- --# func_emit_wrapper_part2 [arg=no] --# --# Emit the second part of a libtool wrapper script on stdout. --# For more information, see the description associated with --# func_emit_wrapper(), below. --func_emit_wrapper_part2 () --{ -- func_emit_wrapper_part2_arg1=no -- if test -n "$1" ; then -- func_emit_wrapper_part2_arg1=$1 -- fi -- -- $ECHO "\ - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. -- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 -+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then -@@ -2814,7 +4033,7 @@ - fi - # remove .libs from thisdir - case \"\$thisdir\" in -- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; -+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi -@@ -2869,6 +4088,18 @@ - - if test -f \"\$progdir/\$program\"; then" - -+ # fixup the dll searchpath if we need to. -+ # -+ # Fix the DLL searchpath if we need to. Do this before prepending -+ # to shlibpath, because on Windows, both are PATH and uninstalled -+ # libraries must come first. -+ if test -n "$dllsearchpath"; then -+ $ECHO "\ -+ # Add the dll search path components to the executable PATH -+ PATH=$dllsearchpath:\$PATH -+" -+ fi -+ - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ -@@ -2877,253 +4108,28 @@ - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed -- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` -+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - - export $shlibpath_var - " - fi - -- # fixup the dll searchpath if we need to. -- if test -n "$dllsearchpath"; then -- $ECHO "\ -- # Add the dll search path components to the executable PATH -- PATH=$dllsearchpath:\$PATH --" -- fi -- - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. --" -- case $host in -- # Backslashes separate directories on plain windows -- *-*-mingw | *-*-os2* | *-cegcc*) -- $ECHO "\ -- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} --" -- ;; -- -- *) -- $ECHO "\ -- exec \"\$progdir/\$program\" \${1+\"\$@\"} --" -- ;; -- esac -- $ECHO "\ -- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 -- exit 1 -+ func_exec_program \${1+\"\$@\"} - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 -- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 -+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi - fi\ - " - } --# end: func_emit_wrapper_part2 -- -- --# func_emit_wrapper [arg=no] --# --# Emit a libtool wrapper script on stdout. --# Don't directly open a file because we may want to --# incorporate the script contents within a cygwin/mingw --# wrapper executable. Must ONLY be called from within --# func_mode_link because it depends on a number of variables --# set therein. --# --# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR --# variable will take. If 'yes', then the emitted script --# will assume that the directory in which it is stored is --# the $objdir directory. This is a cygwin/mingw-specific --# behavior. --func_emit_wrapper () --{ -- func_emit_wrapper_arg1=no -- if test -n "$1" ; then -- func_emit_wrapper_arg1=$1 -- fi -- -- # split this up so that func_emit_cwrapperexe_src -- # can call each part independently. -- func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" -- func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" --} -- -- --# func_to_host_path arg --# --# Convert paths to host format when used with build tools. --# Intended for use with "native" mingw (where libtool itself --# is running under the msys shell), or in the following cross- --# build environments: --# $build $host --# mingw (msys) mingw [e.g. native] --# cygwin mingw --# *nix + wine mingw --# where wine is equipped with the `winepath' executable. --# In the native mingw case, the (msys) shell automatically --# converts paths for any non-msys applications it launches, --# but that facility isn't available from inside the cwrapper. --# Similar accommodations are necessary for $host mingw and --# $build cygwin. Calling this function does no harm for other --# $host/$build combinations not listed above. --# --# ARG is the path (on $build) that should be converted to --# the proper representation for $host. The result is stored --# in $func_to_host_path_result. --func_to_host_path () --{ -- func_to_host_path_result="$1" -- if test -n "$1" ; then -- case $host in -- *mingw* ) -- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -- case $build in -- *mingw* ) # actually, msys -- # awkward: cmd appends spaces to result -- lt_sed_strip_trailing_spaces="s/[ ]*\$//" -- func_to_host_path_tmp1=`( cmd //c echo "$1" |\ -- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` -- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -- $SED -e "$lt_sed_naive_backslashify"` -- ;; -- *cygwin* ) -- func_to_host_path_tmp1=`cygpath -w "$1"` -- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -- $SED -e "$lt_sed_naive_backslashify"` -- ;; -- * ) -- # Unfortunately, winepath does not exit with a non-zero -- # error code, so we are forced to check the contents of -- # stdout. On the other hand, if the command is not -- # found, the shell will set an exit code of 127 and print -- # *an error message* to stdout. So we must check for both -- # error code of zero AND non-empty stdout, which explains -- # the odd construction: -- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` -- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then -- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -- $SED -e "$lt_sed_naive_backslashify"` -- else -- # Allow warning below. -- func_to_host_path_result="" -- fi -- ;; -- esac -- if test -z "$func_to_host_path_result" ; then -- func_error "Could not determine host path corresponding to" -- func_error " '$1'" -- func_error "Continuing, but uninstalled executables may not work." -- # Fallback: -- func_to_host_path_result="$1" -- fi -- ;; -- esac -- fi --} --# end: func_to_host_path - --# func_to_host_pathlist arg --# --# Convert pathlists to host format when used with build tools. --# See func_to_host_path(), above. This function supports the --# following $build/$host combinations (but does no harm for --# combinations not listed here): --# $build $host --# mingw (msys) mingw [e.g. native] --# cygwin mingw --# *nix + wine mingw --# --# Path separators are also converted from $build format to --# $host format. If ARG begins or ends with a path separator --# character, it is preserved (but converted to $host format) --# on output. --# --# ARG is a pathlist (on $build) that should be converted to --# the proper representation on $host. The result is stored --# in $func_to_host_pathlist_result. --func_to_host_pathlist () --{ -- func_to_host_pathlist_result="$1" -- if test -n "$1" ; then -- case $host in -- *mingw* ) -- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -- # Remove leading and trailing path separator characters from -- # ARG. msys behavior is inconsistent here, cygpath turns them -- # into '.;' and ';.', and winepath ignores them completely. -- func_to_host_pathlist_tmp2="$1" -- # Once set for this call, this variable should not be -- # reassigned. It is used in tha fallback case. -- func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ -- $SED -e 's|^:*||' -e 's|:*$||'` -- case $build in -- *mingw* ) # Actually, msys. -- # Awkward: cmd appends spaces to result. -- lt_sed_strip_trailing_spaces="s/[ ]*\$//" -- func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ -- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` -- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ -- $SED -e "$lt_sed_naive_backslashify"` -- ;; -- *cygwin* ) -- func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` -- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ -- $SED -e "$lt_sed_naive_backslashify"` -- ;; -- * ) -- # unfortunately, winepath doesn't convert pathlists -- func_to_host_pathlist_result="" -- func_to_host_pathlist_oldIFS=$IFS -- IFS=: -- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do -- IFS=$func_to_host_pathlist_oldIFS -- if test -n "$func_to_host_pathlist_f" ; then -- func_to_host_path "$func_to_host_pathlist_f" -- if test -n "$func_to_host_path_result" ; then -- if test -z "$func_to_host_pathlist_result" ; then -- func_to_host_pathlist_result="$func_to_host_path_result" -- else -- func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" -- fi -- fi -- fi -- IFS=: -- done -- IFS=$func_to_host_pathlist_oldIFS -- ;; -- esac -- if test -z "$func_to_host_pathlist_result" ; then -- func_error "Could not determine the host path(s) corresponding to" -- func_error " '$1'" -- func_error "Continuing, but uninstalled executables may not work." -- # Fallback. This may break if $1 contains DOS-style drive -- # specifications. The fix is not to complicate the expression -- # below, but for the user to provide a working wine installation -- # with winepath so that path translation in the cross-to-mingw -- # case works properly. -- lt_replace_pathsep_nix_to_dos="s|:|;|g" -- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ -- $SED -e "$lt_replace_pathsep_nix_to_dos"` -- fi -- # Now, add the leading and trailing path separators back -- case "$1" in -- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" -- ;; -- esac -- case "$1" in -- *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" -- ;; -- esac -- ;; -- esac -- fi --} --# end: func_to_host_pathlist - - # func_emit_cwrapperexe_src - # emit the source code for a wrapper executable on stdout -@@ -3141,41 +4147,71 @@ - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. -- -- Currently, it simply execs the wrapper *script* "$SHELL $output", -- but could eventually absorb all of the scripts functionality and -- exec $objdir/$outputname directly. - */ - EOF - cat <<"EOF" -+#ifdef _MSC_VER -+# define _CRT_SECURE_NO_DEPRECATE 1 -+#endif - #include <stdio.h> - #include <stdlib.h> - #ifdef _MSC_VER - # include <direct.h> - # include <process.h> - # include <io.h> --# define setmode _setmode - #else - # include <unistd.h> - # include <stdint.h> - # ifdef __CYGWIN__ - # include <io.h> --# define HAVE_SETENV --# ifdef __STRICT_ANSI__ -+# endif -+#endif -+#include <malloc.h> -+#include <stdarg.h> -+#include <assert.h> -+#include <string.h> -+#include <ctype.h> -+#include <errno.h> -+#include <fcntl.h> -+#include <sys/stat.h> -+ -+/* declarations of non-ANSI functions */ -+#if defined(__MINGW32__) -+# ifdef __STRICT_ANSI__ -+int _putenv (const char *); -+# endif -+#elif defined(__CYGWIN__) -+# ifdef __STRICT_ANSI__ - char *realpath (const char *, char *); - int putenv (char *); - int setenv (const char *, const char *, int); --# endif - # endif -+/* #elif defined (other platforms) ... */ -+#endif -+ -+/* portability defines, excluding path handling macros */ -+#if defined(_MSC_VER) -+# define setmode _setmode -+# define stat _stat -+# define chmod _chmod -+# define getcwd _getcwd -+# define putenv _putenv -+# define S_IXUSR _S_IEXEC -+# ifndef _INTPTR_T_DEFINED -+# define _INTPTR_T_DEFINED -+# define intptr_t int -+# endif -+#elif defined(__MINGW32__) -+# define setmode _setmode -+# define stat _stat -+# define chmod _chmod -+# define getcwd _getcwd -+# define putenv _putenv -+#elif defined(__CYGWIN__) -+# define HAVE_SETENV -+# define FOPEN_WB "wb" -+/* #elif defined (other platforms) ... */ - #endif --#include <malloc.h> --#include <stdarg.h> --#include <assert.h> --#include <string.h> --#include <ctype.h> --#include <errno.h> --#include <fcntl.h> --#include <sys/stat.h> - - #if defined(PATH_MAX) - # define LT_PATHMAX PATH_MAX -@@ -3192,14 +4228,7 @@ - # define S_IXGRP 0 - #endif - --#ifdef _MSC_VER --# define S_IXUSR _S_IEXEC --# define stat _stat --# ifndef _INTPTR_T_DEFINED --# define intptr_t int --# endif --#endif -- -+/* path handling portability macros */ - #ifndef DIR_SEPARATOR - # define DIR_SEPARATOR '/' - # define PATH_SEPARATOR ':' -@@ -3230,10 +4259,6 @@ - # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) - #endif /* PATH_SEPARATOR_2 */ - --#ifdef __CYGWIN__ --# define FOPEN_WB "wb" --#endif -- - #ifndef FOPEN_WB - # define FOPEN_WB "w" - #endif -@@ -3246,22 +4271,13 @@ - if (stale) { free ((void *) stale); stale = 0; } \ - } while (0) - --#undef LTWRAPPER_DEBUGPRINTF --#if defined DEBUGWRAPPER --# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args --static void --ltwrapper_debugprintf (const char *fmt, ...) --{ -- va_list args; -- va_start (args, fmt); -- (void) vfprintf (stderr, fmt, args); -- va_end (args); --} -+#if defined(LT_DEBUGWRAPPER) -+static int lt_debug = 1; - #else --# define LTWRAPPER_DEBUGPRINTF(args) -+static int lt_debug = 0; - #endif - --const char *program_name = NULL; -+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ - - void *xmalloc (size_t num); - char *xstrdup (const char *string); -@@ -3271,41 +4287,27 @@ - int make_executable (const char *path); - int check_executable (const char *path); - char *strendzap (char *str, const char *pat); --void lt_fatal (const char *message, ...); -+void lt_debugprintf (const char *file, int line, const char *fmt, ...); -+void lt_fatal (const char *file, int line, const char *message, ...); -+static const char *nonnull (const char *s); -+static const char *nonempty (const char *s); - void lt_setenv (const char *name, const char *value); - char *lt_extend_str (const char *orig_value, const char *add, int to_end); --void lt_opt_process_env_set (const char *arg); --void lt_opt_process_env_prepend (const char *arg); --void lt_opt_process_env_append (const char *arg); --int lt_split_name_value (const char *arg, char** name, char** value); - void lt_update_exe_path (const char *name, const char *value); - void lt_update_lib_path (const char *name, const char *value); -- --static const char *script_text_part1 = --EOF -- -- func_emit_wrapper_part1 yes | -- $SED -e 's/\([\\"]\)/\\\1/g' \ -- -e 's/^/ "/' -e 's/$/\\n"/' -- echo ";" -- cat <<EOF -- --static const char *script_text_part2 = -+char **prepare_spawn (char **argv); -+void lt_dump_script (FILE *f); - EOF -- func_emit_wrapper_part2 yes | -- $SED -e 's/\([\\"]\)/\\\1/g' \ -- -e 's/^/ "/' -e 's/$/\\n"/' -- echo ";" - - cat <<EOF --const char * MAGIC_EXE = "$magic_exe"; -+volatile const char * MAGIC_EXE = "$magic_exe"; - const char * LIB_PATH_VARNAME = "$shlibpath_var"; - EOF - - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -- func_to_host_pathlist "$temp_rpath" -+ func_to_host_path "$temp_rpath" - cat <<EOF --const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; -+const char * LIB_PATH_VALUE = "$func_to_host_path_result"; - EOF - else - cat <<"EOF" -@@ -3314,10 +4316,10 @@ - fi - - if test -n "$dllsearchpath"; then -- func_to_host_pathlist "$dllsearchpath:" -+ func_to_host_path "$dllsearchpath:" - cat <<EOF - const char * EXE_PATH_VARNAME = "PATH"; --const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; -+const char * EXE_PATH_VALUE = "$func_to_host_path_result"; - EOF - else - cat <<"EOF" -@@ -3340,24 +4342,10 @@ - cat <<"EOF" - - #define LTWRAPPER_OPTION_PREFIX "--lt-" --#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 - --static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; - static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; -- - static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; -- --static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; --static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; -- /* argument is putenv-style "foo=bar", value of foo is set to bar */ -- --static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; --static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; -- /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ -- --static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; --static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; -- /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ -+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; - - int - main (int argc, char *argv[]) -@@ -3374,10 +4362,13 @@ - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); -- LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); -- LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); -+ newargz = XMALLOC (char *, argc + 1); - -- /* very simple arg parsing; don't want to rely on getopt */ -+ /* very simple arg parsing; don't want to rely on getopt -+ * also, copy all non cwrapper options to newargz, except -+ * argz[0], which is handled differently -+ */ -+ newargc=0; - for (i = 1; i < argc; i++) - { - if (strcmp (argv[i], dumpscript_opt) == 0) -@@ -3391,25 +4382,57 @@ - esac - - cat <<"EOF" -- printf ("%s", script_text_part1); -- printf ("%s", script_text_part2); -+ lt_dump_script (stdout); - return 0; - } -+ if (strcmp (argv[i], debug_opt) == 0) -+ { -+ lt_debug = 1; -+ continue; -+ } -+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0) -+ { -+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX -+ namespace, but it is not one of the ones we know about and -+ have already dealt with, above (inluding dump-script), then -+ report an error. Otherwise, targets might begin to believe -+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX -+ namespace. The first time any user complains about this, we'll -+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option -+ or a configure.ac-settable value. -+ */ -+ lt_fatal (__FILE__, __LINE__, -+ "unrecognized %s option: '%s'", -+ ltwrapper_option_prefix, argv[i]); -+ } -+ /* otherwise ... */ -+ newargz[++newargc] = xstrdup (argv[i]); - } -+ newargz[++newargc] = NULL; -+ -+EOF -+ cat <<EOF -+ /* The GNU banner must be the first non-error debug message */ -+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); -+EOF -+ cat <<"EOF" -+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); -+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); - -- newargz = XMALLOC (char *, argc + 1); - tmp_pathspec = find_executable (argv[0]); - if (tmp_pathspec == NULL) -- lt_fatal ("Couldn't find %s", argv[0]); -- LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", -- tmp_pathspec)); -+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) found exe (before symlink chase) at: %s\n", -+ tmp_pathspec); - - actual_cwrapper_path = chase_symlinks (tmp_pathspec); -- LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", -- actual_cwrapper_path)); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) found exe (after symlink chase) at: %s\n", -+ actual_cwrapper_path); - XFREE (tmp_pathspec); - -- actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); -+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); - strendzap (actual_cwrapper_path, actual_cwrapper_name); - - /* wrapper name transforms */ -@@ -3427,8 +4450,9 @@ - target_name = tmp_pathspec; - tmp_pathspec = 0; - -- LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", -- target_name)); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) libtool target name: %s\n", -+ target_name); - EOF - - cat <<EOF -@@ -3478,80 +4502,19 @@ - - lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ - lt_setenv ("DUALCASE", "1"); /* for MSK sh */ -- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); -+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must -+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) -+ because on Windows, both *_VARNAMEs are PATH but uninstalled -+ libraries must come first. */ - lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); -+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); - -- newargc=0; -- for (i = 1; i < argc; i++) -- { -- if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) -- { -- if (argv[i][env_set_opt_len] == '=') -- { -- const char *p = argv[i] + env_set_opt_len + 1; -- lt_opt_process_env_set (p); -- } -- else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) -- { -- lt_opt_process_env_set (argv[++i]); /* don't copy */ -- } -- else -- lt_fatal ("%s missing required argument", env_set_opt); -- continue; -- } -- if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) -- { -- if (argv[i][env_prepend_opt_len] == '=') -- { -- const char *p = argv[i] + env_prepend_opt_len + 1; -- lt_opt_process_env_prepend (p); -- } -- else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) -- { -- lt_opt_process_env_prepend (argv[++i]); /* don't copy */ -- } -- else -- lt_fatal ("%s missing required argument", env_prepend_opt); -- continue; -- } -- if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) -- { -- if (argv[i][env_append_opt_len] == '=') -- { -- const char *p = argv[i] + env_append_opt_len + 1; -- lt_opt_process_env_append (p); -- } -- else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) -- { -- lt_opt_process_env_append (argv[++i]); /* don't copy */ -- } -- else -- lt_fatal ("%s missing required argument", env_append_opt); -- continue; -- } -- if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) -- { -- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX -- namespace, but it is not one of the ones we know about and -- have already dealt with, above (inluding dump-script), then -- report an error. Otherwise, targets might begin to believe -- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX -- namespace. The first time any user complains about this, we'll -- need to make LTWRAPPER_OPTION_PREFIX a configure-time option -- or a configure.ac-settable value. -- */ -- lt_fatal ("Unrecognized option in %s namespace: '%s'", -- ltwrapper_option_prefix, argv[i]); -- } -- /* otherwise ... */ -- newargz[++newargc] = xstrdup (argv[i]); -- } -- newargz[++newargc] = NULL; -- -- LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); -+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", -+ nonnull (lt_argv_zero)); - for (i = 0; i < newargc; i++) - { -- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); -+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", -+ i, nonnull (newargz[i])); - } - - EOF -@@ -3560,11 +4523,14 @@ - mingw*) - cat <<"EOF" - /* execv doesn't actually work on mingw as expected on unix */ -+ newargz = prepare_spawn (newargz); - rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); - if (rval == -1) - { - /* failed to start process */ -- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) failed to launch target \"%s\": %s\n", -+ lt_argv_zero, nonnull (strerror (errno))); - return 127; - } - return rval; -@@ -3586,7 +4552,7 @@ - { - void *p = (void *) malloc (num); - if (!p) -- lt_fatal ("Memory exhausted"); -+ lt_fatal (__FILE__, __LINE__, "memory exhausted"); - - return p; - } -@@ -3620,8 +4586,8 @@ - { - struct stat st; - -- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", -- path ? (*path ? path : "EMPTY!") : "NULL!")); -+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", -+ nonempty (path)); - if ((!path) || (!*path)) - return 0; - -@@ -3638,8 +4604,8 @@ - int rval = 0; - struct stat st; - -- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", -- path ? (*path ? path : "EMPTY!") : "NULL!")); -+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", -+ nonempty (path)); - if ((!path) || (!*path)) - return 0; - -@@ -3665,8 +4631,8 @@ - int tmp_len; - char *concat_name; - -- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", -- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); -+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", -+ nonempty (wrapper)); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; -@@ -3719,7 +4685,8 @@ - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) -- lt_fatal ("getcwd failed"); -+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", -+ nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); -@@ -3744,7 +4711,8 @@ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) -- lt_fatal ("getcwd failed"); -+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", -+ nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); -@@ -3770,8 +4738,9 @@ - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { -- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", -- tmp_pathspec)); -+ lt_debugprintf (__FILE__, __LINE__, -+ "checking path component for symlinks: %s\n", -+ tmp_pathspec); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) -@@ -3793,8 +4762,9 @@ - } - else - { -- char *errstr = strerror (errno); -- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); -+ lt_fatal (__FILE__, __LINE__, -+ "error accessing file \"%s\": %s", -+ tmp_pathspec, nonnull (strerror (errno))); - } - } - XFREE (tmp_pathspec); -@@ -3807,7 +4777,8 @@ - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { -- lt_fatal ("Could not follow symlinks for %s", pathspec); -+ lt_fatal (__FILE__, __LINE__, -+ "could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); - #endif -@@ -3833,11 +4804,25 @@ - return str; - } - -+void -+lt_debugprintf (const char *file, int line, const char *fmt, ...) -+{ -+ va_list args; -+ if (lt_debug) -+ { -+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); -+ va_start (args, fmt); -+ (void) vfprintf (stderr, fmt, args); -+ va_end (args); -+ } -+} -+ - static void --lt_error_core (int exit_status, const char *mode, -+lt_error_core (int exit_status, const char *file, -+ int line, const char *mode, - const char *message, va_list ap) - { -- fprintf (stderr, "%s: %s: ", program_name, mode); -+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - -@@ -3846,20 +4831,32 @@ - } - - void --lt_fatal (const char *message, ...) -+lt_fatal (const char *file, int line, const char *message, ...) - { - va_list ap; - va_start (ap, message); -- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); -+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); - va_end (ap); - } - -+static const char * -+nonnull (const char *s) -+{ -+ return s ? s : "(null)"; -+} -+ -+static const char * -+nonempty (const char *s) -+{ -+ return (s && !*s) ? "(empty)" : nonnull (s); -+} -+ - void - lt_setenv (const char *name, const char *value) - { -- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", -- (name ? name : "<NULL>"), -- (value ? value : "<NULL>"))); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_setenv) setting '%s' to '%s'\n", -+ nonnull (name), nonnull (value)); - { - #ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ -@@ -3904,95 +4901,12 @@ - return new_value; - } - --int --lt_split_name_value (const char *arg, char** name, char** value) --{ -- const char *p; -- int len; -- if (!arg || !*arg) -- return 1; -- -- p = strchr (arg, (int)'='); -- -- if (!p) -- return 1; -- -- *value = xstrdup (++p); -- -- len = strlen (arg) - strlen (*value); -- *name = XMALLOC (char, len); -- strncpy (*name, arg, len-1); -- (*name)[len - 1] = '\0'; -- -- return 0; --} -- --void --lt_opt_process_env_set (const char *arg) --{ -- char *name = NULL; -- char *value = NULL; -- -- if (lt_split_name_value (arg, &name, &value) != 0) -- { -- XFREE (name); -- XFREE (value); -- lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); -- } -- -- lt_setenv (name, value); -- XFREE (name); -- XFREE (value); --} -- --void --lt_opt_process_env_prepend (const char *arg) --{ -- char *name = NULL; -- char *value = NULL; -- char *new_value = NULL; -- -- if (lt_split_name_value (arg, &name, &value) != 0) -- { -- XFREE (name); -- XFREE (value); -- lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); -- } -- -- new_value = lt_extend_str (getenv (name), value, 0); -- lt_setenv (name, new_value); -- XFREE (new_value); -- XFREE (name); -- XFREE (value); --} -- --void --lt_opt_process_env_append (const char *arg) --{ -- char *name = NULL; -- char *value = NULL; -- char *new_value = NULL; -- -- if (lt_split_name_value (arg, &name, &value) != 0) -- { -- XFREE (name); -- XFREE (value); -- lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); -- } -- -- new_value = lt_extend_str (getenv (name), value, 1); -- lt_setenv (name, new_value); -- XFREE (new_value); -- XFREE (name); -- XFREE (value); --} -- - void - lt_update_exe_path (const char *name, const char *value) - { -- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", -- (name ? name : "<NULL>"), -- (value ? value : "<NULL>"))); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", -+ nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { -@@ -4011,9 +4925,9 @@ - void - lt_update_lib_path (const char *name, const char *value) - { -- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", -- (name ? name : "<NULL>"), -- (value ? value : "<NULL>"))); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", -+ nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { -@@ -4023,11 +4937,158 @@ - } - } - -+EOF -+ case $host_os in -+ mingw*) -+ cat <<"EOF" -+ -+/* Prepares an argument vector before calling spawn(). -+ Note that spawn() does not by itself call the command interpreter -+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : -+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); -+ GetVersionEx(&v); -+ v.dwPlatformId == VER_PLATFORM_WIN32_NT; -+ }) ? "cmd.exe" : "command.com"). -+ Instead it simply concatenates the arguments, separated by ' ', and calls -+ CreateProcess(). We must quote the arguments since Win32 CreateProcess() -+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a -+ special way: -+ - Space and tab are interpreted as delimiters. They are not treated as -+ delimiters if they are surrounded by double quotes: "...". -+ - Unescaped double quotes are removed from the input. Their only effect is -+ that within double quotes, space and tab are treated like normal -+ characters. -+ - Backslashes not followed by double quotes are not special. -+ - But 2*n+1 backslashes followed by a double quote become -+ n backslashes followed by a double quote (n >= 0): -+ \" -> " -+ \\\" -> \" -+ \\\\\" -> \\" -+ */ -+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -+char ** -+prepare_spawn (char **argv) -+{ -+ size_t argc; -+ char **new_argv; -+ size_t i; -+ -+ /* Count number of arguments. */ -+ for (argc = 0; argv[argc] != NULL; argc++) -+ ; -+ -+ /* Allocate new argument vector. */ -+ new_argv = XMALLOC (char *, argc + 1); -+ -+ /* Put quoted arguments into the new argument vector. */ -+ for (i = 0; i < argc; i++) -+ { -+ const char *string = argv[i]; -+ -+ if (string[0] == '\0') -+ new_argv[i] = xstrdup ("\"\""); -+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) -+ { -+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); -+ size_t length; -+ unsigned int backslashes; -+ const char *s; -+ char *quoted_string; -+ char *p; -+ -+ length = 0; -+ backslashes = 0; -+ if (quote_around) -+ length++; -+ for (s = string; *s != '\0'; s++) -+ { -+ char c = *s; -+ if (c == '"') -+ length += backslashes + 1; -+ length++; -+ if (c == '\\') -+ backslashes++; -+ else -+ backslashes = 0; -+ } -+ if (quote_around) -+ length += backslashes + 1; -+ -+ quoted_string = XMALLOC (char, length + 1); -+ -+ p = quoted_string; -+ backslashes = 0; -+ if (quote_around) -+ *p++ = '"'; -+ for (s = string; *s != '\0'; s++) -+ { -+ char c = *s; -+ if (c == '"') -+ { -+ unsigned int j; -+ for (j = backslashes + 1; j > 0; j--) -+ *p++ = '\\'; -+ } -+ *p++ = c; -+ if (c == '\\') -+ backslashes++; -+ else -+ backslashes = 0; -+ } -+ if (quote_around) -+ { -+ unsigned int j; -+ for (j = backslashes; j > 0; j--) -+ *p++ = '\\'; -+ *p++ = '"'; -+ } -+ *p = '\0'; -+ -+ new_argv[i] = quoted_string; -+ } -+ else -+ new_argv[i] = (char *) string; -+ } -+ new_argv[argc] = NULL; -+ -+ return new_argv; -+} -+EOF -+ ;; -+ esac - -+ cat <<"EOF" -+void lt_dump_script (FILE* f) -+{ -+EOF -+ func_emit_wrapper yes | -+ $SED -n -e ' -+s/^\(.\{79\}\)\(..*\)/\1\ -+\2/ -+h -+s/\([\\"]\)/\\\1/g -+s/$/\\n/ -+s/\([^\n]*\).*/ fputs ("\1", f);/p -+g -+D' -+ cat <<"EOF" -+} - EOF - } - # end: func_emit_cwrapperexe_src - -+# func_win32_import_lib_p ARG -+# True if ARG is an import lib, as indicated by $file_magic_cmd -+func_win32_import_lib_p () -+{ -+ $opt_debug -+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in -+ *import*) : ;; -+ *) false ;; -+ esac -+} -+ - # func_mode_link arg... - func_mode_link () - { -@@ -4072,6 +5133,7 @@ - new_inherited_linker_flags= - - avoid_version=no -+ bindir= - dlfiles= - dlprefiles= - dlself=no -@@ -4164,6 +5226,11 @@ - esac - - case $prev in -+ bindir) -+ bindir="$arg" -+ prev= -+ continue -+ ;; - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. -@@ -4195,9 +5262,9 @@ - ;; - *) - if test "$prev" = dlfiles; then -- dlfiles="$dlfiles $arg" -+ func_append dlfiles " $arg" - else -- dlprefiles="$dlprefiles $arg" -+ func_append dlprefiles " $arg" - fi - prev= - continue -@@ -4221,7 +5288,7 @@ - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; -- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later -+ *) func_append deplibs " $qarg.ltframework" # this is fixed later - ;; - esac - ;; -@@ -4240,7 +5307,7 @@ - moreargs= - for fil in `cat "$save_arg"` - do --# moreargs="$moreargs $fil" -+# func_append moreargs " $fil" - arg=$fil - # A libtool-controlled object. - -@@ -4269,7 +5336,7 @@ - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $pic_object" -+ func_append dlfiles " $pic_object" - prev= - continue - else -@@ -4281,7 +5348,7 @@ - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. -- dlprefiles="$dlprefiles $pic_object" -+ func_append dlprefiles " $pic_object" - prev= - fi - -@@ -4351,12 +5418,12 @@ - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; -- *) rpath="$rpath $arg" ;; -+ *) func_append rpath " $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; -- *) xrpath="$xrpath $arg" ;; -+ *) func_append xrpath " $arg" ;; - esac - fi - prev= -@@ -4368,28 +5435,28 @@ - continue - ;; - weak) -- weak_libs="$weak_libs $arg" -+ func_append weak_libs " $arg" - prev= - continue - ;; - xcclinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $qarg" -+ func_append linker_flags " $qarg" -+ func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) -- compiler_flags="$compiler_flags $qarg" -+ func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $wl$qarg" -+ func_append linker_flags " $qarg" -+ func_append compiler_flags " $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" -@@ -4425,6 +5492,11 @@ - continue - ;; - -+ -bindir) -+ prev=bindir -+ continue -+ ;; -+ - -dlopen) - prev=dlfiles - continue -@@ -4475,15 +5547,16 @@ - ;; - - -L*) -- func_stripname '-L' '' "$arg" -- dir=$func_stripname_result -- if test -z "$dir"; then -+ func_stripname "-L" '' "$arg" -+ if test -z "$func_stripname_result"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" - else - func_fatal_error "need path for \`-L' option" - fi - fi -+ func_resolve_sysroot "$func_stripname_result" -+ dir=$func_resolve_sysroot_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; -@@ -4495,24 +5568,30 @@ - ;; - esac - case "$deplibs " in -- *" -L$dir "*) ;; -+ *" -L$dir "* | *" $arg "*) -+ # Will only happen for absolute or sysroot arguments -+ ;; - *) -- deplibs="$deplibs -L$dir" -- lib_search_path="$lib_search_path $dir" -+ # Preserve sysroot, but never include relative directories -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; -+ *) func_append deplibs " -L$dir" ;; -+ esac -+ func_append lib_search_path " $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -- testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` -+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; -- *) dllsearchpath="$dllsearchpath:$dir";; -+ *) func_append dllsearchpath ":$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; -- *) dllsearchpath="$dllsearchpath:$testbindir";; -+ *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac -@@ -4522,7 +5601,7 @@ - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) - # These systems don't actually have a C or math library (as such) - continue - ;; -@@ -4536,7 +5615,7 @@ - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework -- deplibs="$deplibs System.ltframework" -+ func_append deplibs " System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) -@@ -4556,7 +5635,7 @@ - ;; - esac - fi -- deplibs="$deplibs $arg" -+ func_append deplibs " $arg" - continue - ;; - -@@ -4568,21 +5647,22 @@ - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. -- -model|-arch|-isysroot) -- compiler_flags="$compiler_flags $arg" -+ -model|-arch|-isysroot|--sysroot) -+ func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -- compiler_flags="$compiler_flags $arg" -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ -+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) -+ func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; -+ * ) func_append new_inherited_linker_flags " $arg" ;; - esac - continue - ;; -@@ -4649,13 +5729,17 @@ - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; -+ =*) -+ func_stripname '=' '' "$dir" -+ dir=$lt_sysroot$func_stripname_result -+ ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -+ *) func_append xrpath " $dir" ;; - esac - continue - ;; -@@ -4708,8 +5792,8 @@ - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" -- arg="$arg $wl$func_quote_for_eval_result" -- compiler_flags="$compiler_flags $func_quote_for_eval_result" -+ func_append arg " $func_quote_for_eval_result" -+ func_append compiler_flags " $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" -@@ -4724,9 +5808,9 @@ - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" -- arg="$arg $wl$func_quote_for_eval_result" -- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" -- linker_flags="$linker_flags $func_quote_for_eval_result" -+ func_append arg " $wl$func_quote_for_eval_result" -+ func_append compiler_flags " $wl$func_quote_for_eval_result" -+ func_append linker_flags " $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" -@@ -4754,23 +5838,27 @@ - arg="$func_quote_for_eval_result" - ;; - -- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler -- # -r[0-9][0-9]* specifies the processor on the SGI compiler -- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler -- # +DA*, +DD* enable 64-bit mode on the HP compiler -- # -q* pass through compiler args for the IBM compiler -- # -m*, -t[45]*, -txscale* pass through architecture-specific -- # compiler args for GCC -- # -F/path gives path to uninstalled frameworks, gcc on darwin -- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC -- # @file GCC response files -+ # Flags to be passed through unchanged, with rationale: -+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler -+ # -r[0-9][0-9]* specify processor for the SGI compiler -+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler -+ # +DA*, +DD* enable 64-bit mode for the HP compiler -+ # -q* compiler args for the IBM compiler -+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC -+ # -F/path path to uninstalled frameworks, gcc on darwin -+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC -+ # @file GCC response files -+ # -tp=* Portland pgcc target processor selection -+ # --sysroot=* for sysroot support -+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) -+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" -- compiler_flags="$compiler_flags $arg" -+ func_append compiler_flags " $arg" - continue - ;; - -@@ -4782,7 +5870,7 @@ - - *.$objext) - # A standard object. -- objs="$objs $arg" -+ func_append objs " $arg" - ;; - - *.lo) -@@ -4813,7 +5901,7 @@ - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $pic_object" -+ func_append dlfiles " $pic_object" - prev= - continue - else -@@ -4825,7 +5913,7 @@ - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. -- dlprefiles="$dlprefiles $pic_object" -+ func_append dlprefiles " $pic_object" - prev= - fi - -@@ -4870,24 +5958,25 @@ - - *.$libext) - # An archive. -- deplibs="$deplibs $arg" -- old_deplibs="$old_deplibs $arg" -+ func_append deplibs " $arg" -+ func_append old_deplibs " $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - -+ func_resolve_sysroot "$arg" - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. -- dlfiles="$dlfiles $arg" -+ func_append dlfiles " $func_resolve_sysroot_result" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. -- dlprefiles="$dlprefiles $arg" -+ func_append dlprefiles " $func_resolve_sysroot_result" - prev= - else -- deplibs="$deplibs $arg" -+ func_append deplibs " $func_resolve_sysroot_result" - fi - continue - ;; -@@ -4925,7 +6014,7 @@ - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var -- eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` - else - shlib_search_path= - fi -@@ -4934,6 +6023,8 @@ - - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" -+ func_to_tool_file "$output_objdir/" -+ tool_output_objdir=$func_to_tool_file_result - # Create the object directory. - func_mkdir_p "$output_objdir" - -@@ -4954,12 +6045,12 @@ - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do -- if $opt_duplicate_deps ; then -+ if $opt_preserve_dup_deps ; then - case "$libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi -- libs="$libs $deplib" -+ func_append libs " $deplib" - done - - if test "$linkmode" = lib; then -@@ -4972,9 +6063,9 @@ - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in -- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; -+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; - esac -- pre_post_deps="$pre_post_deps $pre_post_dep" -+ func_append pre_post_deps " $pre_post_dep" - done - fi - pre_post_deps= -@@ -5033,10 +6124,7 @@ - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; -- link) -- libs="$deplibs %DEPLIBS%" -- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" -- ;; -+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then -@@ -5044,17 +6132,19 @@ - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= -+ func_resolve_sysroot "$lib" - case $lib in -- *.la) func_source "$lib" ;; -+ *.la) func_source "$func_resolve_sysroot_result" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do -- deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` -+ func_basename "$deplib" -+ deplib_base=$func_basename_result - case " $weak_libs " in - *" $deplib_base "*) ;; -- *) deplibs="$deplibs $deplib" ;; -+ *) func_append deplibs " $deplib" ;; - esac - done - done -@@ -5070,16 +6160,17 @@ - lib= - found=no - case $deplib in -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ -+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else -- compiler_flags="$compiler_flags $deplib" -+ func_append compiler_flags " $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi -@@ -5164,7 +6255,7 @@ - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi -@@ -5177,7 +6268,8 @@ - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - prog) - if test "$pass" = conv; then -@@ -5191,7 +6283,8 @@ - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - *) - func_warning "\`-L' is ignored for archives/objects" -@@ -5202,17 +6295,21 @@ - -R*) - if test "$pass" = link; then - func_stripname '-R' '' "$deplib" -- dir=$func_stripname_result -+ func_resolve_sysroot "$func_stripname_result" -+ dir=$func_resolve_sysroot_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -+ *) func_append xrpath " $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; -- *.la) lib="$deplib" ;; -+ *.la) -+ func_resolve_sysroot "$deplib" -+ lib=$func_resolve_sysroot_result -+ ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" -@@ -5230,7 +6327,7 @@ - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ -+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi -@@ -5240,15 +6337,15 @@ - ;; - esac - if test "$valid_a_lib" != yes; then -- $ECHO -+ echo - $ECHO "*** Warning: Trying to link with static lib archive $deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because the file extensions .$libext of this argument makes me believe" -- $ECHO "*** that it is just a static archive that I should not use here." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because the file extensions .$libext of this argument makes me believe" -+ echo "*** that it is just a static archive that I should not use here." - else -- $ECHO -+ echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" -@@ -5275,11 +6372,11 @@ - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. -- newdlprefiles="$newdlprefiles $deplib" -+ func_append newdlprefiles " $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else -- newdlfiles="$newdlfiles $deplib" -+ func_append newdlfiles " $deplib" - fi - fi - continue -@@ -5321,20 +6418,20 @@ - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then -- tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` -+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; -- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; -+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; - esac - done - fi -- dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then -- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -+ test -n "$dlopen" && func_append dlfiles " $dlopen" -+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" - fi - - if test "$pass" = conv; then -@@ -5345,30 +6442,36 @@ - func_fatal_error "cannot find name of link library for \`$lib'" - fi - # It is a libtool convenience library, so add in its objects. -- convenience="$convenience $ladir/$objdir/$old_library" -- old_convenience="$old_convenience $ladir/$objdir/$old_library" -- tmp_libs= -- for deplib in $dependency_libs; do -- deplibs="$deplib $deplibs" -- if $opt_duplicate_deps ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done -+ func_append convenience " $ladir/$objdir/$old_library" -+ func_append old_convenience " $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" - fi -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ deplibs="$deplib $deplibs" -+ if $opt_preserve_dup_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; -+ esac -+ fi -+ func_append tmp_libs " $deplib" -+ done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= -- for l in $old_library $library_names; do -- linklib="$l" -- done -+ if test -n "$old_library" && -+ { test "$prefer_static_libs" = yes || -+ test "$prefer_static_libs,$installed" = "built,no"; }; then -+ linklib=$old_library -+ else -+ for l in $old_library $library_names; do -+ linklib="$l" -+ done -+ fi - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi -@@ -5385,9 +6488,9 @@ - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. -- dlprefiles="$dlprefiles $lib $dependency_libs" -+ func_append dlprefiles " $lib $dependency_libs" - else -- newdlfiles="$newdlfiles $lib" -+ func_append newdlfiles " $lib" - fi - continue - fi # $pass = dlopen -@@ -5409,14 +6512,14 @@ - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then -- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else -- dir="$libdir" -- absdir="$libdir" -+ dir="$lt_sysroot$libdir" -+ absdir="$lt_sysroot$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else -@@ -5424,12 +6527,12 @@ - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -+ func_append notinst_path " $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -+ func_append notinst_path " $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" -@@ -5440,20 +6543,46 @@ - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" - fi -- # Prefer using a static library (so that no silly _DYNAMIC symbols -- # are required to link). -- if test -n "$old_library"; then -- newdlprefiles="$newdlprefiles $dir/$old_library" -- # Keep a list of preopened convenience libraries to check -- # that they are being used correctly in the link pass. -- test -z "$libdir" && \ -- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" -- # Otherwise, use the dlname, so that lt_dlopen finds it. -- elif test -n "$dlname"; then -- newdlprefiles="$newdlprefiles $dir/$dlname" -- else -- newdlprefiles="$newdlprefiles $dir/$linklib" -- fi -+ case "$host" in -+ # special handling for platforms with PE-DLLs. -+ *cygwin* | *mingw* | *cegcc* ) -+ # Linker will automatically link against shared library if both -+ # static and shared are present. Therefore, ensure we extract -+ # symbols from the import library if a shared library is present -+ # (otherwise, the dlopen module name will be incorrect). We do -+ # this by putting the import library name into $newdlprefiles. -+ # We recover the dlopen module name by 'saving' the la file -+ # name in a special purpose variable, and (later) extracting the -+ # dlname from the la file. -+ if test -n "$dlname"; then -+ func_tr_sh "$dir/$linklib" -+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" -+ func_append newdlprefiles " $dir/$linklib" -+ else -+ func_append newdlprefiles " $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ func_append dlpreconveniencelibs " $dir/$old_library" -+ fi -+ ;; -+ * ) -+ # Prefer using a static library (so that no silly _DYNAMIC symbols -+ # are required to link). -+ if test -n "$old_library"; then -+ func_append newdlprefiles " $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ func_append dlpreconveniencelibs " $dir/$old_library" -+ # Otherwise, use the dlname, so that lt_dlopen finds it. -+ elif test -n "$dlname"; then -+ func_append newdlprefiles " $dir/$dlname" -+ else -+ func_append newdlprefiles " $dir/$linklib" -+ fi -+ ;; -+ esac - fi # $pass = dlpreopen - - if test -z "$libdir"; then -@@ -5471,7 +6600,7 @@ - - - if test "$linkmode" = prog && test "$pass" != link; then -- newlib_search_path="$newlib_search_path $ladir" -+ func_append newlib_search_path " $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no -@@ -5484,7 +6613,8 @@ - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - esac - # Need to link against all dependency_libs? -@@ -5495,12 +6625,12 @@ - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi -- if $opt_duplicate_deps ; then -+ if $opt_preserve_dup_deps ; then - case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi -- tmp_libs="$tmp_libs $deplib" -+ func_append tmp_libs " $deplib" - done # for deplib - continue - fi # $linkmode = prog... -@@ -5515,7 +6645,7 @@ - # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; -- *) temp_rpath="$temp_rpath$absdir:" ;; -+ *) func_append temp_rpath "$absdir:" ;; - esac - fi - -@@ -5527,7 +6657,7 @@ - *) - case "$compile_rpath " in - *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -+ *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac -@@ -5536,7 +6666,7 @@ - *) - case "$finalize_rpath " in - *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -+ *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac -@@ -5561,12 +6691,12 @@ - case $host in - *cygwin* | *mingw* | *cegcc*) - # No point in relinking DLLs because paths are not encoded -- notinst_deplibs="$notinst_deplibs $lib" -+ func_append notinst_deplibs " $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then -- notinst_deplibs="$notinst_deplibs $lib" -+ func_append notinst_deplibs " $lib" - need_relink=yes - fi - ;; -@@ -5583,7 +6713,7 @@ - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then -- $ECHO -+ echo - if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else -@@ -5601,7 +6731,7 @@ - *) - case "$compile_rpath " in - *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -+ *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac -@@ -5610,7 +6740,7 @@ - *) - case "$finalize_rpath " in - *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -+ *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac -@@ -5664,7 +6794,7 @@ - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - -- if test "$linkmode" = prog || test "$mode" != relink; then -+ if test "$linkmode" = prog || test "$opt_mode" != relink; then - add_shlibpath= - add_dir= - add= -@@ -5686,9 +6816,9 @@ - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then -- $ECHO -- $ECHO "*** And there doesn't seem to be a static archive available" -- $ECHO "*** The link will probably fail, sorry" -+ echo -+ echo "*** And there doesn't seem to be a static archive available" -+ echo "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi -@@ -5715,12 +6845,12 @@ - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then -- add_dir="-L$dir" -+ add_dir="-L$absdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) -- add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi -@@ -5742,7 +6872,7 @@ - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; -- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -+ *) func_append compile_shlibpath "$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then -@@ -5756,13 +6886,13 @@ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ *) func_append finalize_shlibpath "$libdir:" ;; - esac - fi - fi - fi - -- if test "$linkmode" = prog || test "$mode" = relink; then -+ if test "$linkmode" = prog || test "$opt_mode" = relink; then - add_shlibpath= - add_dir= - add= -@@ -5776,7 +6906,7 @@ - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ *) func_append finalize_shlibpath "$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then -@@ -5793,7 +6923,7 @@ - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) -- add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi -@@ -5828,21 +6958,21 @@ - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. -- $ECHO -+ echo - $ECHO "*** Warning: This system can not link to static lib archive $lib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then -- $ECHO "*** But as you try to build a module library, libtool will still create " -- $ECHO "*** a static module, that should work as long as the dlopening application" -- $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." -+ echo "*** But as you try to build a module library, libtool will still create " -+ echo "*** a static module, that should work as long as the dlopening application" -+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then -- $ECHO -- $ECHO "*** However, this would only work if libtool was able to extract symbol" -- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $ECHO "*** not find such a program. So, this module is probably useless." -- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module -@@ -5870,27 +7000,33 @@ - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; -- *) xrpath="$xrpath $temp_xrpath";; -+ *) func_append xrpath " $temp_xrpath";; - esac;; -- *) temp_deplibs="$temp_deplibs $libdir";; -+ *) func_append temp_deplibs " $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - -- newlib_search_path="$newlib_search_path $absdir" -+ func_append newlib_search_path " $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" -- if $opt_duplicate_deps ; then -+ case $deplib in -+ -L*) func_stripname '-L' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result";; -+ *) func_resolve_sysroot "$deplib" ;; -+ esac -+ if $opt_preserve_dup_deps ; then - case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ *" $func_resolve_sysroot_result "*) -+ func_append specialdeplibs " $func_resolve_sysroot_result" ;; - esac - fi -- tmp_libs="$tmp_libs $deplib" -+ func_append tmp_libs " $func_resolve_sysroot_result" - done - - if test "$link_all_deplibs" != no; then -@@ -5900,8 +7036,10 @@ - case $deplib in - -L*) path="$deplib" ;; - *.la) -+ func_resolve_sysroot "$deplib" -+ deplib=$func_resolve_sysroot_result - func_dirname "$deplib" "" "." -- dir="$func_dirname_result" -+ dir=$func_dirname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -@@ -5928,8 +7066,8 @@ - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi -- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" -+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" - path= - fi - fi -@@ -5962,7 +7100,7 @@ - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else -- compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs="$newdependency_libs" -@@ -5979,7 +7117,7 @@ - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; -- *) lib_search_path="$lib_search_path $dir" ;; -+ *) func_append lib_search_path " $dir" ;; - esac - done - newlib_search_path= -@@ -6037,10 +7175,10 @@ - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -+ *) func_append tmp_libs " $deplib" ;; - esac - ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -+ *) func_append tmp_libs " $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" -@@ -6056,7 +7194,7 @@ - ;; - esac - if test -n "$i" ; then -- tmp_libs="$tmp_libs $i" -+ func_append tmp_libs " $i" - fi - done - dependency_libs=$tmp_libs -@@ -6097,7 +7235,7 @@ - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" -- objs="$objs$old_deplibs" -+ func_append objs "$old_deplibs" - ;; - - lib) -@@ -6130,10 +7268,10 @@ - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else -- $ECHO -+ echo - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" -- libobjs="$libobjs $objs" -+ func_append libobjs " $objs" - fi - fi - -@@ -6192,13 +7330,14 @@ - # which has an extra 1 added just for fun - # - case $version_type in -+ # correct linux to gnu/linux during the next big refactor - darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_revision" - ;; -- freebsd-aout|freebsd-elf|sunos) -+ freebsd-aout|freebsd-elf|qnx|sunos) - current="$number_major" - revision="$number_minor" - age="0" -@@ -6210,9 +7349,6 @@ - revision="$number_minor" - lt_irix_increment=no - ;; -- *) -- func_fatal_configuration "$modename: unknown library version type \`$version_type'" -- ;; - esac - ;; - no) -@@ -6311,7 +7447,7 @@ - versuffix="$major.$revision" - ;; - -- linux) -+ linux) # correct to gnu/linux during the next big refactor - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" -@@ -6334,7 +7470,7 @@ - done - - # Make executables depend on our current version. -- verstring="$verstring:${current}.0" -+ func_append verstring ":${current}.0" - ;; - - qnx) -@@ -6402,10 +7538,10 @@ - fi - - func_generate_dlsyms "$libname" "$libname" "yes" -- libobjs="$libobjs $symfileobj" -+ func_append libobjs " $symfileobj" - test "X$libobjs" = "X " && libobjs= - -- if test "$mode" != relink; then -+ if test "$opt_mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= -@@ -6421,7 +7557,7 @@ - continue - fi - fi -- removelist="$removelist $p" -+ func_append removelist " $p" - ;; - *) ;; - esac -@@ -6432,27 +7568,28 @@ - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -- oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ func_append oldlibs " $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. -- oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do -- # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` -- # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` -- # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` -+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` -+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` -+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do -- temp_xrpath="$temp_xrpath -R$libdir" -+ func_replace_sysroot "$libdir" -+ func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -+ *) func_append finalize_rpath " $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -@@ -6466,7 +7603,7 @@ - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; -- *) dlfiles="$dlfiles $lib" ;; -+ *) func_append dlfiles " $lib" ;; - esac - done - -@@ -6476,19 +7613,19 @@ - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; -- *) dlprefiles="$dlprefiles $lib" ;; -+ *) func_append dlprefiles " $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework -- deplibs="$deplibs System.ltframework" -+ func_append deplibs " System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. -@@ -6505,7 +7642,7 @@ - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then -- deplibs="$deplibs -lc" -+ func_append deplibs " -lc" - fi - ;; - esac -@@ -6554,7 +7691,7 @@ - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - i="" - ;; - esac -@@ -6565,21 +7702,21 @@ - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - else - droppeddeps=yes -- $ECHO -+ echo - $ECHO "*** Warning: dynamic linker does not accept needed library $i." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which I believe you do not have" -- $ECHO "*** because a test_compile did reveal that the linker did not use it for" -- $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which I believe you do not have" -+ echo "*** because a test_compile did reveal that the linker did not use it for" -+ echo "*** its dynamic dependency list that programs get resolved with at runtime." - fi - fi - ;; - *) -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - ;; - esac - done -@@ -6597,7 +7734,7 @@ - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - i="" - ;; - esac -@@ -6608,29 +7745,29 @@ - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - else - droppeddeps=yes -- $ECHO -+ echo - $ECHO "*** Warning: dynamic linker does not accept needed library $i." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because a test_compile did reveal that the linker did not use this one" -- $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because a test_compile did reveal that the linker did not use this one" -+ echo "*** as a dynamic dependency that programs can get resolved with at runtime." - fi - fi - else - droppeddeps=yes -- $ECHO -+ echo - $ECHO "*** Warning! Library $i is needed by this library but I was not able to" -- $ECHO "*** make it link in! You will probably need to install it or some" -- $ECHO "*** library that it depends on before this library will be fully" -- $ECHO "*** functional. Installing it before continuing would be even better." -+ echo "*** make it link in! You will probably need to install it or some" -+ echo "*** library that it depends on before this library will be fully" -+ echo "*** functional. Installing it before continuing would be even better." - fi - ;; - *) -- newdeplibs="$newdeplibs $i" -+ func_append newdeplibs " $i" - ;; - esac - done -@@ -6647,15 +7784,27 @@ - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` -+ if test -n "$file_magic_glob"; then -+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` -+ else -+ libnameglob=$libname -+ fi -+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ if test "$want_nocaseglob" = yes; then -+ shopt -s nocaseglob -+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` -+ $nocaseglob -+ else -+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` -+ fi - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | -@@ -6672,13 +7821,13 @@ - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -- *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - a_deplib="" - break 2 - fi -@@ -6687,12 +7836,12 @@ - fi - if test -n "$a_deplib" ; then - droppeddeps=yes -- $ECHO -+ echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because I did check the linker path looking for a file starting" -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else -@@ -6703,7 +7852,7 @@ - ;; - *) - # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. -@@ -6719,7 +7868,7 @@ - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - a_deplib="" - ;; - esac -@@ -6730,9 +7879,9 @@ - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test -- if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ -+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - a_deplib="" - break 2 - fi -@@ -6741,12 +7890,12 @@ - fi - if test -n "$a_deplib" ; then - droppeddeps=yes -- $ECHO -+ echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because I did check the linker path looking for a file starting" -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else -@@ -6757,32 +7906,32 @@ - ;; - *) - # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -+ func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" -- tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -- -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` -+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' -- tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` -+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` - done - fi -- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | -- $GREP . >/dev/null; then -- $ECHO -+ case $tmp_deplibs in -+ *[!\ \ ]*) -+ echo - if test "X$deplibs_check_method" = "Xnone"; then -- $ECHO "*** Warning: inter-library dependencies are not supported in this platform." -+ echo "*** Warning: inter-library dependencies are not supported in this platform." - else -- $ECHO "*** Warning: inter-library dependencies are not known to be supported." -+ echo "*** Warning: inter-library dependencies are not known to be supported." - fi -- $ECHO "*** All declared inter-library dependencies are being dropped." -+ echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes -- fi -+ ;; -+ esac - ;; - esac - versuffix=$versuffix_save -@@ -6794,23 +7943,23 @@ - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework -- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then -- $ECHO -- $ECHO "*** Warning: libtool could not satisfy all declared inter-library" -+ echo -+ echo "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" -- $ECHO "*** a static module, that should work as long as the dlopening" -- $ECHO "*** application is linked with the -dlopen flag." -+ echo "*** a static module, that should work as long as the dlopening" -+ echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then -- $ECHO -- $ECHO "*** However, this would only work if libtool was able to extract symbol" -- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $ECHO "*** not find such a program. So, this module is probably useless." -- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" -@@ -6820,16 +7969,16 @@ - build_libtool_libs=no - fi - else -- $ECHO "*** The inter-library dependencies that have been dropped here will be" -- $ECHO "*** automatically added whenever a program is linked with this library" -- $ECHO "*** or is declared to -dlopen it." -+ echo "*** The inter-library dependencies that have been dropped here will be" -+ echo "*** automatically added whenever a program is linked with this library" -+ echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then -- $ECHO -- $ECHO "*** Since this library must not contain undefined symbols," -- $ECHO "*** because either the platform does not support them or" -- $ECHO "*** it was explicitly requested with -no-undefined," -- $ECHO "*** libtool will only create a static version of it." -+ echo -+ echo "*** Since this library must not contain undefined symbols," -+ echo "*** because either the platform does not support them or" -+ echo "*** it was explicitly requested with -no-undefined," -+ echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module -@@ -6846,9 +7995,9 @@ - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) -- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - -@@ -6861,7 +8010,7 @@ - *) - case " $deplibs " in - *" -L$path/$objdir "*) -- new_libs="$new_libs -L$path/$objdir" ;; -+ func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac -@@ -6871,10 +8020,10 @@ - -L*) - case " $new_libs " in - *" $deplib "*) ;; -- *) new_libs="$new_libs $deplib" ;; -+ *) func_append new_libs " $deplib" ;; - esac - ;; -- *) new_libs="$new_libs $deplib" ;; -+ *) func_append new_libs " $deplib" ;; - esac - done - deplibs="$new_libs" -@@ -6886,15 +8035,22 @@ - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then -+ # Remove ${wl} instances when linking with ld. -+ # FIXME: should test the right _cmds variable. -+ case $archive_cmds in -+ *\$LD\ *) wl= ;; -+ esac - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" -- test "$mode" != relink && rpath="$compile_rpath$rpath" -+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then -+ func_replace_sysroot "$libdir" -+ libdir=$func_replace_sysroot_result - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else -@@ -6903,18 +8059,18 @@ - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" -- dep_rpath="$dep_rpath $flag" -+ func_append dep_rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -+ *) func_append perm_rpath " $libdir" ;; - esac - fi - done -@@ -6922,17 +8078,13 @@ - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" -- if test -n "$hardcode_libdir_flag_spec_ld"; then -- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" -- else -- eval dep_rpath=\"$hardcode_libdir_flag_spec\" -- fi -+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do -- rpath="$rpath$dir:" -+ func_append rpath "$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi -@@ -6940,7 +8092,7 @@ - fi - - shlibpath="$finalize_shlibpath" -- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi -@@ -6966,18 +8118,18 @@ - linknames= - for link - do -- linknames="$linknames $link" -+ func_append linknames " $link" - done - - # Use standard objects if they are pic -- test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" -- delfiles="$delfiles $export_symbols" -+ func_append delfiles " $export_symbols" - fi - - orig_export_symbols= -@@ -7008,13 +8160,45 @@ - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -+ for cmd1 in $cmds; do - IFS="$save_ifs" -- eval cmd=\"$cmd\" -- func_len " $cmd" -- len=$func_len_result -- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ # Take the normal branch if the nm_file_list_spec branch -+ # doesn't work or if tool conversion is not needed. -+ case $nm_file_list_spec~$to_tool_file_cmd in -+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) -+ try_normal_branch=yes -+ eval cmd=\"$cmd1\" -+ func_len " $cmd" -+ len=$func_len_result -+ ;; -+ *) -+ try_normal_branch=no -+ ;; -+ esac -+ if test "$try_normal_branch" = yes \ -+ && { test "$len" -lt "$max_cmd_len" \ -+ || test "$max_cmd_len" -le -1; } -+ then -+ func_show_eval "$cmd" 'exit $?' -+ skipped_export=false -+ elif test -n "$nm_file_list_spec"; then -+ func_basename "$output" -+ output_la=$func_basename_result -+ save_libobjs=$libobjs -+ save_output=$output -+ output=${output_objdir}/${output_la}.nm -+ func_to_tool_file "$output" -+ libobjs=$nm_file_list_spec$func_to_tool_file_result -+ func_append delfiles " $output" -+ func_verbose "creating $NM input file list: $output" -+ for obj in $save_libobjs; do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" -+ done > "$output" -+ eval cmd=\"$cmd1\" - func_show_eval "$cmd" 'exit $?' -+ output=$save_output -+ libobjs=$save_libobjs - skipped_export=false - else - # The command line is too long to execute in one step. -@@ -7036,7 +8220,7 @@ - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then -@@ -7048,7 +8232,7 @@ - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -+ func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi -@@ -7058,7 +8242,7 @@ - case " $convenience " in - *" $test_deplib "*) ;; - *) -- tmp_deplibs="$tmp_deplibs $test_deplib" -+ func_append tmp_deplibs " $test_deplib" - ;; - esac - done -@@ -7078,21 +8262,21 @@ - test "X$libobjs" = "X " && libobjs= - else - gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - - func_extract_archives $gentop $convenience -- libobjs="$libobjs $func_extract_archives_result" -+ func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" -- linker_flags="$linker_flags $flag" -+ func_append linker_flags " $flag" - fi - - # Make a backup of the uninstalled library when relinking -- if test "$mode" = relink; then -+ if test "$opt_mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - -@@ -7137,7 +8321,8 @@ - save_libobjs=$libobjs - fi - save_output=$output -- output_la=`$ECHO "X$output" | $Xsed -e "$basename"` -+ func_basename "$output" -+ output_la=$func_basename_result - - # Clear the reloadable object creation command queue and - # initialize k to one. -@@ -7150,13 +8335,16 @@ - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" -- $ECHO 'INPUT (' > $output -+ echo 'INPUT (' > $output - for obj in $save_libobjs - do -- $ECHO "$obj" >> $output -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" >> $output - done -- $ECHO ')' >> $output -- delfiles="$delfiles $output" -+ echo ')' >> $output -+ func_append delfiles " $output" -+ func_to_tool_file "$output" -+ output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" -@@ -7170,10 +8358,12 @@ - fi - for obj - do -- $ECHO "$obj" >> $output -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" >> $output - done -- delfiles="$delfiles $output" -- output=$firstobj\"$file_list_spec$output\" -+ func_append delfiles " $output" -+ func_to_tool_file "$output" -+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." -@@ -7197,17 +8387,19 @@ - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. -- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" -+ reload_objs=$objlist -+ eval concat_cmds=\"$reload_cmds\" - else - # All subsequent reloadable object files will link in - # the last one created. -- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" -+ reload_objs="$objlist $last_robj" -+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext -- objlist=$obj -+ objlist=" $obj" - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result -@@ -7217,11 +8409,12 @@ - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" -+ reload_objs="$objlist $last_robj" -+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi -- delfiles="$delfiles $output" -+ func_append delfiles " $output" - - else - output= -@@ -7255,7 +8448,7 @@ - lt_exit=$? - - # Restore the uninstalled library and exit -- if test "$mode" = relink; then -+ if test "$opt_mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) -@@ -7276,7 +8469,7 @@ - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then -@@ -7288,7 +8481,7 @@ - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -+ func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi -@@ -7329,10 +8522,10 @@ - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles -- libobjs="$libobjs $func_extract_archives_result" -+ func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - -@@ -7348,7 +8541,7 @@ - lt_exit=$? - - # Restore the uninstalled library and exit -- if test "$mode" = relink; then -+ if test "$opt_mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) -@@ -7360,7 +8553,7 @@ - IFS="$save_ifs" - - # Restore the uninstalled library and exit -- if test "$mode" = relink; then -+ if test "$opt_mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then -@@ -7441,18 +8634,21 @@ - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" -- reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` -+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` - else - gentop="$output_objdir/${obj}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - -+ # If we're not building shared, we need to use non_pic_objs -+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" -+ - # Create the old-style object. -- reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' -@@ -7512,8 +8708,8 @@ - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework -- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` -+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - -@@ -7524,14 +8720,14 @@ - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) -- compile_command="$compile_command ${wl}-bind_at_load" -- finalize_command="$finalize_command ${wl}-bind_at_load" -+ func_append compile_command " ${wl}-bind_at_load" -+ func_append finalize_command " ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" -- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - -@@ -7545,7 +8741,7 @@ - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) -- new_libs="$new_libs -L$path/$objdir" ;; -+ func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac -@@ -7555,17 +8751,17 @@ - -L*) - case " $new_libs " in - *" $deplib "*) ;; -- *) new_libs="$new_libs $deplib" ;; -+ *) func_append new_libs " $deplib" ;; - esac - ;; -- *) new_libs="$new_libs $deplib" ;; -+ *) func_append new_libs " $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - -- compile_command="$compile_command $compile_deplibs" -- finalize_command="$finalize_command $finalize_deplibs" -+ func_append compile_command " $compile_deplibs" -+ func_append finalize_command " $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. -@@ -7573,7 +8769,7 @@ - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -+ *) func_append finalize_rpath " $libdir" ;; - esac - done - fi -@@ -7592,18 +8788,18 @@ - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -+ func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -+ *) func_append perm_rpath " $libdir" ;; - esac - fi - case $host in -@@ -7612,12 +8808,12 @@ - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; -- *) dllsearchpath="$dllsearchpath:$libdir";; -+ *) func_append dllsearchpath ":$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; -- *) dllsearchpath="$dllsearchpath:$testbindir";; -+ *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac -@@ -7643,18 +8839,18 @@ - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -+ func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; -- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -+ *) func_append finalize_perm_rpath " $libdir" ;; - esac - fi - done -@@ -7668,8 +8864,8 @@ - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. -- compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` -+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" -@@ -7681,15 +8877,15 @@ - - wrappers_required=yes - case $host in -+ *cegcc* | *mingw32ce*) -+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. -+ wrappers_required=no -+ ;; - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; -- *cegcc) -- # Disable wrappers for cegcc, we are cross compiling anyway. -- wrappers_required=no -- ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no -@@ -7698,13 +8894,19 @@ - esac - if test "$wrappers_required" = no; then - # Replace the output file specification. -- compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' -+ fi -+ - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' -@@ -7727,7 +8929,7 @@ - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do -- rpath="$rpath$dir:" -+ func_append rpath "$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -@@ -7735,7 +8937,7 @@ - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do -- rpath="$rpath$dir:" -+ func_append rpath "$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -@@ -7745,11 +8947,18 @@ - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. -- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' -+ -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' -+ fi -+ - exit $EXIT_SUCCESS - fi - -@@ -7764,7 +8973,7 @@ - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then -- relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= -@@ -7776,13 +8985,19 @@ - fi - - # Replace the output file specification. -- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` -+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output_objdir/$outputname" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' -+ fi -+ - # Now create the wrapper script. - func_verbose "creating $output" - -@@ -7800,18 +9015,7 @@ - fi - done - relink_command="(cd `pwd`; $relink_command)" -- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -- fi -- -- # Quote $ECHO for shipping. -- if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then -- case $progpath in -- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; -- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; -- esac -- qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` -- else -- qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` -+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. -@@ -7891,7 +9095,7 @@ - else - oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then -- oldobjs="$oldobjs $symfileobj" -+ func_append oldobjs " $symfileobj" - fi - fi - addlibs="$old_convenience" -@@ -7899,10 +9103,10 @@ - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - - func_extract_archives $gentop $addlibs -- oldobjs="$oldobjs $func_extract_archives_result" -+ func_append oldobjs " $func_extract_archives_result" - fi - - # Do each command in the archive commands. -@@ -7913,10 +9117,10 @@ - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles -- oldobjs="$oldobjs $func_extract_archives_result" -+ func_append oldobjs " $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have -@@ -7932,9 +9136,9 @@ - done | sort | sort -uc >/dev/null 2>&1); then - : - else -- $ECHO "copying selected object files to avoid basename conflicts..." -+ echo "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ func_append generated " $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= -@@ -7958,18 +9162,30 @@ - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" -- oldobjs="$oldobjs $gentop/$newobj" -+ func_append oldobjs " $gentop/$newobj" - ;; -- *) oldobjs="$oldobjs $obj" ;; -+ *) func_append oldobjs " $obj" ;; - esac - done - fi -+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 -+ tool_oldlib=$func_to_tool_file_result - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds -+ elif test -n "$archiver_list_spec"; then -+ func_verbose "using command file archive linking..." -+ for obj in $oldobjs -+ do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" -+ done > $output_objdir/$libname.libcmd -+ func_to_tool_file "$output_objdir/$libname.libcmd" -+ oldobjs=" $archiver_list_spec$func_to_tool_file_result" -+ cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." -@@ -8043,7 +9259,7 @@ - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" -- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi -@@ -8063,12 +9279,23 @@ - *.la) - func_basename "$deplib" - name="$func_basename_result" -- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ func_resolve_sysroot "$deplib" -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" -- newdependency_libs="$newdependency_libs $libdir/$name" -+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" -+ ;; -+ -L*) -+ func_stripname -L '' "$deplib" -+ func_replace_sysroot "$func_stripname_result" -+ func_append newdependency_libs " -L$func_replace_sysroot_result" - ;; -- *) newdependency_libs="$newdependency_libs $deplib" ;; -+ -R*) -+ func_stripname -R '' "$deplib" -+ func_replace_sysroot "$func_stripname_result" -+ func_append newdependency_libs " -R$func_replace_sysroot_result" -+ ;; -+ *) func_append newdependency_libs " $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" -@@ -8082,9 +9309,9 @@ - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" -- newdlfiles="$newdlfiles $libdir/$name" -+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" - ;; -- *) newdlfiles="$newdlfiles $lib" ;; -+ *) func_append newdlfiles " $lib" ;; - esac - done - dlfiles="$newdlfiles" -@@ -8101,7 +9328,7 @@ - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" -- newdlprefiles="$newdlprefiles $libdir/$name" -+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" - ;; - esac - done -@@ -8113,7 +9340,7 @@ - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac -- newdlfiles="$newdlfiles $abs" -+ func_append newdlfiles " $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= -@@ -8122,15 +9349,33 @@ - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac -- newdlprefiles="$newdlprefiles $abs" -+ func_append newdlprefiles " $abs" - done - dlprefiles="$newdlprefiles" - fi - $RM $output - # place dlname in correct position for cygwin -+ # In fact, it would be nice if we could use this code for all target -+ # systems that can't hard-code library paths into their executables -+ # and that have no shared library path variable independent of PATH, -+ # but it turns out we can't easily determine that from inspecting -+ # libtool variables, so we have to hard-code the OSs to which it -+ # applies here; at the moment, that means platforms that use the PE -+ # object format with DLL files. See the long comment at the top of -+ # tests/bindir.at for full details. - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in -- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; -+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) -+ # If a -bindir argument was supplied, place the dll there. -+ if test "x$bindir" != x ; -+ then -+ func_relative_path "$install_libdir" "$bindir" -+ tdlname=$func_relative_path_result$dlname -+ else -+ # Otherwise fall back on heuristic. -+ tdlname=../bin/$dlname -+ fi -+ ;; - esac - $ECHO > $output "\ - # $outputname - a libtool library file -@@ -8189,7 +9434,7 @@ - exit $EXIT_SUCCESS - } - --{ test "$mode" = link || test "$mode" = relink; } && -+{ test "$opt_mode" = link || test "$opt_mode" = relink; } && - func_mode_link ${1+"$@"} - - -@@ -8209,9 +9454,9 @@ - for arg - do - case $arg in -- -f) RM="$RM $arg"; rmforce=yes ;; -- -*) RM="$RM $arg" ;; -- *) files="$files $arg" ;; -+ -f) func_append RM " $arg"; rmforce=yes ;; -+ -*) func_append RM " $arg" ;; -+ *) func_append files " $arg" ;; - esac - done - -@@ -8220,24 +9465,23 @@ - - rmdirs= - -- origobjdir="$objdir" - for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then -- objdir="$origobjdir" -+ odir="$objdir" - else -- objdir="$dir/$origobjdir" -+ odir="$dir/$objdir" - fi - func_basename "$file" - name="$func_basename_result" -- test "$mode" = uninstall && objdir="$dir" -+ test "$opt_mode" = uninstall && odir="$dir" - -- # Remember objdir for removal later, being careful to avoid duplicates -- if test "$mode" = clean; then -+ # Remember odir for removal later, being careful to avoid duplicates -+ if test "$opt_mode" = clean; then - case " $rmdirs " in -- *" $objdir "*) ;; -- *) rmdirs="$rmdirs $objdir" ;; -+ *" $odir "*) ;; -+ *) func_append rmdirs " $odir" ;; - esac - fi - -@@ -8263,18 +9507,17 @@ - - # Delete the libtool libraries and symlinks. - for n in $library_names; do -- rmfiles="$rmfiles $objdir/$n" -+ func_append rmfiles " $odir/$n" - done -- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" -+ test -n "$old_library" && func_append rmfiles " $odir/$old_library" - -- case "$mode" in -+ case "$opt_mode" in - clean) -- case " $library_names " in -- # " " in the beginning catches empty $dlname -+ case " $library_names " in - *" $dlname "*) ;; -- *) rmfiles="$rmfiles $objdir/$dlname" ;; -+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; - esac -- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" -+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then -@@ -8302,19 +9545,19 @@ - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then -- rmfiles="$rmfiles $dir/$pic_object" -+ func_append rmfiles " $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then -- rmfiles="$rmfiles $dir/$non_pic_object" -+ func_append rmfiles " $dir/$non_pic_object" - fi - fi - ;; - - *) -- if test "$mode" = clean ; then -+ if test "$opt_mode" = clean ; then - noexename=$name - case $file in - *.exe) -@@ -8324,7 +9567,7 @@ - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe -- rmfiles="$rmfiles $file" -+ func_append rmfiles " $file" - ;; - esac - # Do a test to see if this is a libtool program. -@@ -8333,7 +9576,7 @@ - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result -- rmfiles="$rmfiles $func_ltwrapper_scriptname_result" -+ func_append rmfiles " $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename -@@ -8341,12 +9584,12 @@ - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles -- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" -+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then -- rmfiles="$rmfiles $objdir/lt-$name" -+ func_append rmfiles " $odir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then -- rmfiles="$rmfiles $objdir/lt-${noexename}.c" -+ func_append rmfiles " $odir/lt-${noexename}.c" - fi - fi - fi -@@ -8354,7 +9597,6 @@ - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done -- objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do -@@ -8366,16 +9608,16 @@ - exit $exit_status - } - --{ test "$mode" = uninstall || test "$mode" = clean; } && -+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && - func_mode_uninstall ${1+"$@"} - --test -z "$mode" && { -+test -z "$opt_mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" - } - - test -z "$exec_cmd" && \ -- func_fatal_help "invalid operation mode \`$mode'" -+ func_fatal_help "invalid operation mode \`$opt_mode'" - - if test -n "$exec_cmd"; then - eval exec "$exec_cmd" -Only in src/hal-0.5.14: Makefile -diff -u -r hal-0.5.14/Makefile.in src/hal-0.5.14/Makefile.in ---- hal-0.5.14/Makefile.in 2009-11-30 23:22:42.000000000 +0100 -+++ src/hal-0.5.14/Makefile.in 2011-12-19 20:40:22.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -164,6 +164,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -206,6 +207,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -226,6 +228,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -248,6 +252,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -281,7 +286,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -426,7 +430,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -451,7 +455,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -615,7 +619,8 @@ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ -- || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ -+ || find "$(distdir)" -type d ! -perm -755 \ -+ -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ -@@ -659,17 +664,17 @@ - distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ -- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ -+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ -- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ -+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ -- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ -+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ -- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ -+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac -Only in src/hal-0.5.14/partutil: .deps -Only in src/hal-0.5.14/partutil: libpartutil.la -Only in src/hal-0.5.14/partutil: .libs -Only in src/hal-0.5.14/partutil: logger.lo -Only in src/hal-0.5.14/partutil: Makefile -diff -u -r hal-0.5.14/partutil/Makefile.in src/hal-0.5.14/partutil/Makefile.in ---- hal-0.5.14/partutil/Makefile.in 2009-11-30 23:22:41.000000000 +0100 -+++ src/hal-0.5.14/partutil/Makefile.in 2011-12-19 20:40:21.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -113,6 +113,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -155,6 +156,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -175,6 +177,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -197,6 +201,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -230,7 +235,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/partutil: partutil.lo -Only in src/hal-0.5.14/policy: Makefile -diff -u -r hal-0.5.14/policy/Makefile.in src/hal-0.5.14/policy/Makefile.in ---- hal-0.5.14/policy/Makefile.in 2009-11-30 23:22:41.000000000 +0100 -+++ src/hal-0.5.14/policy/Makefile.in 2011-12-19 20:40:21.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -115,6 +115,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -157,6 +158,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -177,6 +179,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -199,6 +203,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -232,7 +237,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14: stamp-h1 -Only in src/hal-0.5.14/tools: .deps -Only in src/hal-0.5.14/tools/freebsd: Makefile -diff -u -r hal-0.5.14/tools/freebsd/Makefile.in src/hal-0.5.14/tools/freebsd/Makefile.in ---- hal-0.5.14/tools/freebsd/Makefile.in 2009-11-30 23:22:42.000000000 +0100 -+++ src/hal-0.5.14/tools/freebsd/Makefile.in 2011-12-19 20:40:22.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -106,6 +106,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -148,6 +149,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -168,6 +170,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -190,6 +194,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -223,7 +228,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -diff -u -r hal-0.5.14/tools/linux/hal-system-killswitch-get-power-linux src/hal-0.5.14/tools/linux/hal-system-killswitch-get-power-linux ---- hal-0.5.14/tools/linux/hal-system-killswitch-get-power-linux 2008-11-10 11:14:12.000000000 +0100 -+++ src/hal-0.5.14/tools/linux/hal-system-killswitch-get-power-linux 2011-12-19 20:39:54.000000000 +0100 -@@ -8,11 +8,6 @@ - # the Free Software Foundation; either version 2 of the License, or - # (at your option) any later version. - --DELL_WCTL=/usr/bin/dellWirelessCtl --if [ -x "/usr/sbin/dellWirelessCtl" ]; then -- DELL_WCTL=/usr/sbin/dellWirelessCtl --fi -- - if [ "$HAL_PROP_KILLSWITCH_TYPE" = "bluetooth" ]; then - if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "sonypic" ]; then - value="`hal-system-sonypic getbluetooth`" -@@ -22,25 +17,6 @@ - exit 1 - fi - exit ${value} -- elif [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # TODO: write our own binary that links with libsmbios? -- $DELL_WCTL --st_bt -- value=$? -- if [ "$value" = "0" ]; then -- exit 1 -- elif [ "$value" = "1" ]; then -- exit 0 -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $value" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi - elif [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = thinkpad -a -r "$HAL_PROP_LINUX_SYSFS_PATH" ]; then - read value < $HAL_PROP_LINUX_SYSFS_PATH 2> /dev/null - if [ $? -eq 0 ]; then -@@ -53,56 +29,6 @@ - else - echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 - echo "Access type not supported" >&2 -- exit 1 -- fi --elif [ "$HAL_PROP_KILLSWITCH_TYPE" = "wlan" ]; then -- if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # TODO: write our own binary that links with libsmbios? -- $DELL_WCTL --st_wlan -- value=$? -- if [ "$value" = "0" ]; then -- exit 1 -- elif [ "$value" = "1" ]; then -- exit 0 -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $value" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "Access type not supported" >&2 -- exit 1 -- fi --elif [ "$HAL_PROP_KILLSWITCH_TYPE" = "wwan" ]; then -- if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # TODO: write our own binary that links with libsmbios? -- $DELL_WCTL --st_wwan -- value=$? -- if [ "$value" = "0" ]; then -- exit 1 -- elif [ "$value" = "1" ]; then -- exit 0 -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $value" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "Access type not supported" >&2 - exit 1 - fi - else -diff -u -r hal-0.5.14/tools/linux/hal-system-killswitch-set-power-linux src/hal-0.5.14/tools/linux/hal-system-killswitch-set-power-linux ---- hal-0.5.14/tools/linux/hal-system-killswitch-set-power-linux 2008-11-10 11:14:12.000000000 +0100 -+++ src/hal-0.5.14/tools/linux/hal-system-killswitch-set-power-linux 2011-12-19 20:39:54.000000000 +0100 -@@ -8,11 +8,6 @@ - # the Free Software Foundation; either version 2 of the License, or - # (at your option) any later version. - --DELL_WCTL=/usr/bin/dellWirelessCtl --if [ -x "/usr/sbin/dellWirelessCtl" ]; then -- DELL_WCTL=/usr/sbin/dellWirelessCtl --fi -- - if [ "$HAL_PROP_KILLSWITCH_TYPE" = "bluetooth" ]; then - if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "sonypic" ]; then - hal-system-sonypic setbluetooth $value -@@ -23,26 +18,6 @@ - exit 1 - fi - exit 0 -- elif [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # TODO: write our own binary that links with libsmbios? -- if [ "$value" = "true" ]; then -- $DELL_WCTL --bt 1 -- ret=$? -- else -- $DELL_WCTL --bt 0 -- ret=$? -- fi -- if [ "$ret" != "0" ]; then -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $ret" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi - elif [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = thinkpad -a -w "$HAL_PROP_LINUX_SYSFS_PATH" ]; then - if [ "$value" = "true" ]; then - bit=1; -@@ -59,60 +34,6 @@ - else - echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 - echo "Access type not supported" >&2 -- exit 1 -- fi --elif [ "$HAL_PROP_KILLSWITCH_TYPE" = "wlan" ]; then -- if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # As a side effect we disable the physical kill switch -- # TODO: write our own binary that links with libsmbios? -- if [ "$value" = "true" ]; then -- $DELL_WCTL --sw_wlan 0 --wlan 1 -- ret=$? -- else -- $DELL_WCTL --sw_wlan 0 --wlan 0 -- ret=$? -- fi -- if [ "$ret" != "0" ]; then -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $ret" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "Access type not supported" >&2 -- exit 1 -- fi --elif [ "$HAL_PROP_KILLSWITCH_TYPE" = "wwan" ]; then -- if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then -- if [ -x "$DELL_WCTL" ]; then -- # As a side effect we disable the physical kill switch -- # TODO: write our own binary that links with libsmbios? -- if [ "$value" = "true" ]; then -- $DELL_WCTL --sw_wwan 0 --wwan 1 -- ret=$? -- else -- $DELL_WCTL --sw_wwan 0 --wwan 0 -- ret=$? -- fi -- if [ "$ret" != "0" ]; then -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl returned $ret" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "dellWirelessCtl ($DELL_WCTL) not available or executable" >&2 -- exit 1 -- fi -- else -- echo "org.freedesktop.Hal.Device.KillSwitch.NotSupported" >&2 -- echo "Access type not supported" >&2 - exit 1 - fi - else -Only in src/hal-0.5.14/tools/linux: Makefile -diff -u -r hal-0.5.14/tools/linux/Makefile.in src/hal-0.5.14/tools/linux/Makefile.in ---- hal-0.5.14/tools/linux/Makefile.in 2009-11-30 23:22:42.000000000 +0100 -+++ src/hal-0.5.14/tools/linux/Makefile.in 2011-12-19 20:40:22.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -112,6 +112,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -154,6 +155,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -174,6 +176,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -196,6 +200,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -229,7 +234,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -Only in src/hal-0.5.14/tools: Makefile -diff -u -r hal-0.5.14/tools/Makefile.in src/hal-0.5.14/tools/Makefile.in ---- hal-0.5.14/tools/Makefile.in 2009-11-30 23:22:42.000000000 +0100 -+++ src/hal-0.5.14/tools/Makefile.in 2011-12-19 20:40:22.000000000 +0100 -@@ -1,4 +1,4 @@ --# Makefile.in generated by automake 1.11 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -@@ -357,6 +357,7 @@ - DBUS_SYS_DIR = @DBUS_SYS_DIR@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ -+DLLTOOL = @DLLTOOL@ - DSYMUTIL = @DSYMUTIL@ - DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ -@@ -399,6 +400,7 @@ - LT_REVISION = @LT_REVISION@ - MAINT = @MAINT@ - MAKEINFO = @MAKEINFO@ -+MANIFEST_TOOL = @MANIFEST_TOOL@ - MAN_PAGES_ENABLED = @MAN_PAGES_ENABLED@ - MKDIR_P = @MKDIR_P@ - NM = @NM@ -@@ -419,6 +421,8 @@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - PCI_IDS_DIR = @PCI_IDS_DIR@ - PKG_CONFIG = @PKG_CONFIG@ -+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ - POLKIT_CFLAGS = @POLKIT_CFLAGS@ - POLKIT_LIBS = @POLKIT_LIBS@ - POLKIT_POLICY_FILE_VALIDATE = @POLKIT_POLICY_FILE_VALIDATE@ -@@ -441,6 +445,7 @@ - abs_srcdir = @abs_srcdir@ - abs_top_builddir = @abs_top_builddir@ - abs_top_srcdir = @abs_top_srcdir@ -+ac_ct_AR = @ac_ct_AR@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ - ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -@@ -474,7 +479,6 @@ - libexecdir = @libexecdir@ - localedir = @localedir@ - localstatedir = @localstatedir@ --lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -@@ -912,7 +916,7 @@ - # (which will cause the Makefiles to be regenerated when you run `make'); - # (2) otherwise, pass the desired values on the `make' command line. - $(RECURSIVE_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ -@@ -937,7 +941,7 @@ - fi; test -z "$$fail" - - $(RECURSIVE_CLEAN_TARGETS): -- @failcom='exit 1'; \ -+ @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ |