From 80e4199df2ac852cfb22848698cabe9ba28e5a67 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 22 Jan 2012 00:13:14 -0600 Subject: Part 1 of 2 of kdm rename --- .../kdebase/debian/man/genkdmconf-kde3.1 | 38 ++++++++--------- .../kdebase/debian/man/kdm-kde3.1 | 48 +++++++++++----------- .../kdebase/debian/man/kdm_config-kde3.1 | 12 +++--- .../kdebase/debian/man/kdm_greet-kde3.1 | 12 +++--- .../kdebase/debian/man/kdmctl-kde3.1 | 28 ++++++------- .../kdebase/debian/man/krootimage-kde3.1 | 6 +-- .../kdebase/debian/man/startkde-kde3.1 | 2 +- 7 files changed, 73 insertions(+), 73 deletions(-) (limited to 'ubuntu/maverick_automake/kdebase/debian/man') diff --git a/ubuntu/maverick_automake/kdebase/debian/man/genkdmconf-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/genkdmconf-kde3.1 index e627bdaf0..fe759bed4 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/genkdmconf-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/genkdmconf-kde3.1 @@ -1,12 +1,12 @@ .\" This file was generated by (a slightly modified) kdemangen.pl and edited by hand -.TH GENKDMCONF 1 "June 2006" "K Desktop Environment" "generate configuration files for kdm" +.TH GENTDMCONF 1 "June 2006" "K Desktop Environment" "generate configuration files for tdm" .SH NAME -genkdmconf -\- generate configuration files for kdm +gentdmconf +\- generate configuration files for tdm .SH SYNOPSIS -\fBgenkdmconf\fP +\fBgentdmconf\fP .RB [ \-\-in -.IR /path/to/new/kdm\-config\-dir ] +.IR /path/to/new/tdm\-config\-dir ] .RS 11 .RB [ \-\-old\-xdm .IR /path/to/old/xdm\-dir ] @@ -27,49 +27,49 @@ genkdmconf .RE .SH DESCRIPTION -\fBgenkdmconf\fP is used to generate configuration files for \fBkdm\fP. +\fBgentdmconf\fP is used to generate configuration files for \fBtdm\fP. .br -If an older xdm/kdm configuration is found, its config files are "absorbed"; +If an older xdm/tdm configuration is found, its config files are "absorbed"; if it lives in the new target directory, its scripts are reused (and possibly modified) as well, otherwise the scripts are ignored and default scripts are installed. .SH OPTIONS .TP -.BI \-\-in \ /path/to/new/kdm\-config\-dir +.BI \-\-in \ /path/to/new/tdm\-config\-dir In which directory to put the new configuration. You can use this to support a $(DESTDIR), but not to change the final location of the installation \- the paths inside the files are not affected. .br -Default is \fI/etc/kde3/kdm\fP. +Default is \fI/etc/kde3/tdm\fP. .TP .BI \-\-old\-xdm \ /path/to/old/xdm\-dir -Where to look for the config files of an \fBxdm\fP / older \fBkdm\fP. Default is to scan -.IR /etc/X11/kdm , \ $XLIBDIR/kdm , \ /etc/X11/xdm , \ $XLIBDIR/xdm ; -there in turn look for \fIkdm\-config\fP and \fIxdm\-config\fP. +Where to look for the config files of an \fBxdm\fP / older \fBtdm\fP. Default is to scan +.IR /etc/X11/tdm , \ $XLIBDIR/tdm , \ /etc/X11/xdm , \ $XLIBDIR/xdm ; +there in turn look for \fItdm\-config\fP and \fIxdm\-config\fP. .br Note that you possibly need to use \fB\-\-no\-old\-kde\fP to make this take effect. .TP .BI \-\-old\-kde \ /path/to/old/kde\-config\-dir -Where to look for the \fIkdmrc\fP of an older \fBkdm\fP. +Where to look for the \fItdmrc\fP of an older \fBtdm\fP. .br .RI Default\ is\ to\ scan\ /etc/kde3 \ and\ { /usr,/usr/local , .RI { /opt,/usr/local }{ kde3,kde,kde2,kde1 }} /share/config . .TP .B \-\-no\-old -Don't look at older xdm/kdm configurations, just create default config. +Don't look at older xdm/tdm configurations, just create default config. .TP .B \-\-no\-old\-xdm Don't look at older xdm configurations. .TP .B \-\-no\-old\-kde -Don't look at older kdm configurations. +Don't look at older tdm configurations. .TP .B \-\-old\-scripts -Directly use all scripts from the older xdm/kdm configuration. +Directly use all scripts from the older xdm/tdm configuration. .TP .B \-\-no\-old\-scripts -Don't use scripts from the older xdm/kdm configuration even if it lives in the new target directory. +Don't use scripts from the older xdm/tdm configuration even if it lives in the new target directory. .TP .B \-\-old\-confs -Directly use all ancillary config files from the older xdm/kdm configuration. This is usually a bad idea. +Directly use all ancillary config files from the older xdm/tdm configuration. This is usually a bad idea. .TP .B \-\-no\-backup Overwrite/delete old config files instead of backing them up. @@ -77,7 +77,7 @@ Overwrite/delete old config files instead of backing them up. .B \-\-no\-in\-notice Don't put the notice about \fB\-\-in\fP being used into the generated README. .SH SEE ALSO -.BR kdm (1) +.BR tdm (1) .SH AUTHORS .nf Oswald Buddenhagen diff --git a/ubuntu/maverick_automake/kdebase/debian/man/kdm-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/kdm-kde3.1 index 48637989d..d7eb868fa 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/kdm-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/kdm-kde3.1 @@ -1,16 +1,16 @@ .\" This file was generated by (a slightly modified) kdemangen.pl and edited by hand -.TH KDM 1 "June 2006" "K Desktop Environment" "KDE Display Manager" +.TH TDM 1 "June 2006" "K Desktop Environment" "KDE Display Manager" .SH NAME -kdm +tdm \- KDE Display Manager .SH SYNOPSIS -\fBkdm\fP [options] [tty] +\fBtdm\fP [options] [tty] .SH DESCRIPTION -\fBkdm\fP is the KDE display manager also known as login manager. It shows a graphical login screen for username and password. After authenticating the user it starts a session. +\fBtdm\fP is the KDE display manager also known as login manager. It shows a graphical login screen for username and password. After authenticating the user it starts a session. .br -\fBkdm\fP can be configured for remote login via XDMCP. XDMCP is the "X Display Manager Control Protocol" which is used to set up connections between remote systems over the network. +\fBtdm\fP can be configured for remote login via XDMCP. XDMCP is the "X Display Manager Control Protocol" which is used to set up connections between remote systems over the network. .sp 1 -\fBkdm\fP is a derivative of \fBxdm\fP. \fBman 1 xdm\fP may provide useful information (requires installed \fBxdm\fP). For X-related problems try \fBman 7x X\fP and \fBman 1 startx\fP. +\fBtdm\fP is a derivative of \fBxdm\fP. \fBman 1 xdm\fP may provide useful information (requires installed \fBxdm\fP). For X-related problems try \fBman 7x X\fP and \fBman 1 startx\fP. .SH OPTIONS .TP .B \-daemon @@ -55,48 +55,48 @@ Debug option bitfield: .RE .SH FILES .TP -.I /etc/kde3/kdm/backgroundrc +.I /etc/kde3/tdm/backgroundrc configuration file with background settings .TP -.I /etc/kde3/kdm/kdm.options -options for X display manager kdm +.I /etc/kde3/tdm/tdm.options +options for X display manager tdm .TP -.I /etc/kde3/kdm/kdmrc -the kdm configuration file +.I /etc/kde3/tdm/tdmrc +the tdm configuration file .TP -.I /etc/kde3/kdm/Xaccess +.I /etc/kde3/tdm/Xaccess access control file for XDMCP connections .TP -.I /etc/kde3/kdm/Xservers +.I /etc/kde3/tdm/Xservers list of local X-servers .TP -.I /etc/kde3/kdm/Xreset +.I /etc/kde3/tdm/Xreset script to run as root after session exits .TP -.I /etc/kde3/kdm/Xsession +.I /etc/kde3/tdm/Xsession script to run as user after login of user .TP -.I /etc/kde3/kdm/Xsetup +.I /etc/kde3/tdm/Xsetup script to run as root before the login dialog appears .sp 1 -this script can be edited to disable or modify the running of \fBxconsole\fP on the kdm greeter screen +this script can be edited to disable or modify the running of \fBxconsole\fP on the tdm greeter screen .TP -.I /etc/kde3/kdm/Xstartup +.I /etc/kde3/tdm/Xstartup script to run as root before session starts .TP -.I /etc/kde3/kdm/Xwilling +.I /etc/kde3/tdm/Xwilling output of this script is displayed in the chooser window .SH SEE ALSO -.BR kdm.options (5),\ kdmctl (1),\ kdm_config (1),\ kdm_greet (1),\ startx (1),\ X (7x),\ xconsole (1),\ xdm (1) +.BR tdm.options (5),\ tdmctl (1),\ tdm_config (1),\ tdm_greet (1),\ startx (1),\ X (7x),\ xconsole (1),\ xdm (1) .TP -.I /opt/kde3/share/doc/kdm/README.gz -Information about \fBkdm\fP and its options +.I /opt/kde3/share/doc/tdm/README.gz +Information about \fBtdm\fP and its options .sp 1 .RE Full user documentation is available through the KDE Help Center. You can also enter the URL -.BR help:/kdm/ +.BR help:/tdm/ directly into konqueror or you can run -.BR "khelpcenter help:/kdm/" +.BR "khelpcenter help:/tdm/" from the command\-line. .br .SH AUTHORS diff --git a/ubuntu/maverick_automake/kdebase/debian/man/kdm_config-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/kdm_config-kde3.1 index d1cbfea1d..d9325214a 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/kdm_config-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/kdm_config-kde3.1 @@ -1,14 +1,14 @@ .\" This file was generated by (a slightly modified) kdemangen.pl and edited by hand -.TH KDM_CONFIG 1 "June 2006" "K Desktop Environment" "helper program" +.TH TDM_CONFIG 1 "June 2006" "K Desktop Environment" "helper program" .SH NAME -kdm_config -\- helper programm for kdm to read configuration files +tdm_config +\- helper programm for tdm to read configuration files .SH SYNOPSIS -\fBkdm_config\fP +\fBtdm_config\fP .SH DESCRIPTION -\fBkdm_config\fP is a helper program for \fBkdm\fP to read configuration files. +\fBtdm_config\fP is a helper program for \fBtdm\fP to read configuration files. .SH SEE ALSO -\fBkdm\fP(1) +\fBtdm\fP(1) .SH AUTHORS .nf Oswald Buddenhagen diff --git a/ubuntu/maverick_automake/kdebase/debian/man/kdm_greet-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/kdm_greet-kde3.1 index f1607e2b1..c33f57d5f 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/kdm_greet-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/kdm_greet-kde3.1 @@ -1,14 +1,14 @@ .\" This file was generated by (a slightly modified) kdemangen.pl and edited by hand -.TH KDM_GREET 1 "June 2006" "K Desktop Environment" "KDE greeter module" +.TH TDM_GREET 1 "June 2006" "K Desktop Environment" "KDE greeter module" .SH NAME -kdm_greet -\- KDE greeter module for kdm +tdm_greet +\- KDE greeter module for tdm .SH SYNOPSIS -\fBkdm_greet\fP +\fBtdm_greet\fP .SH DESCRIPTION -\fBkdm_greet\fP is a KDE greeter module for \fBkdm\fP. It shows the login dialog. +\fBtdm_greet\fP is a KDE greeter module for \fBtdm\fP. It shows the login dialog. .SH SEE ALSO -.BR kdm (1) +.BR tdm (1) .SH AUTHORS .nf Oswald Buddenhagen diff --git a/ubuntu/maverick_automake/kdebase/debian/man/kdmctl-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/kdmctl-kde3.1 index 6e5ab781f..9833845bf 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/kdmctl-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/kdmctl-kde3.1 @@ -1,12 +1,12 @@ .\" This file was generated by (a slightly modified) kdemangen.pl and edited by hand -.TH KDMCTL 1 "June 2006" "K Desktop Environment" "KDM remote control application" +.TH TDMCTL 1 "June 2006" "K Desktop Environment" "TDM remote control application" .SH NAME -kdmctl -\- kdm remote control application +tdmctl +\- tdm remote control application .SH SYNOPSIS -\fBkdmctl\fP [options] [command [command arguments]] +\fBtdmctl\fP [options] [command [command arguments]] .SH DESCRIPTION -\fBkdmctl\fP is an application to remote\-control \fBkdm\fP. It makes use of UNIX domain sockets. +\fBtdmctl\fP is an application to remote\-control \fBtdm\fP. It makes use of UNIX domain sockets. .sp 1 There are two types of sockets: the global one (dmctl) and the per\-display ones (dmctl\-). The global one's subdir is owned by root, the subdirs of the per\-display ones' are owned by the user currently owning the session (root or the logged in user). .sp 1 @@ -16,7 +16,7 @@ The directory in which the sockets are located is determined this way: .br \- the $DM_CONTROL variable is examined .br -\- the kdm config file is searched for the FifoDir key +\- the tdm config file is searched for the FifoDir key .br .RI \- /var/run/xdmctl \ and\ /var/run \ are\ tried .RE @@ -28,7 +28,7 @@ Tokens in the command and the reply are tab\-separated. Command arguments can be specified as separate command line parameters, in which case they are simply concatenated with tabs in between. .sp 1 -If the command is '\-', \fBkdmctl\fP reads commands from stdin. +If the command is '\-', \fBtdmctl\fP reads commands from stdin. The default command is 'caps'. .SH OPTIONS .SS @@ -47,7 +47,7 @@ Override $DISPLAY Override $DM_CONTROL .TP .B \-c \-config -Use alternative kdm config file +Use alternative tdm config file .SS Commands: .br .SS Global commands: @@ -72,8 +72,8 @@ The currently running session is forcibly terminated. No auto\-relogin is attemp .TP .B caps Returns a list of this socket's capabilities: -.IP " \- kdm" -identifies kdm, in case some other DM implements this protocol, too. +.IP " \- tdm" +identifies tdm, in case some other DM implements this protocol, too. .IP " \- list, activate, lock, suicide, login" the respective command is supported. .IP " \- bootoptions" @@ -155,7 +155,7 @@ Shutdowns requested from per\-display sockets are executed when the current sess .sp 1 start is the time for which the shutdown is scheduled. If it starts with a plus\-sign, the current time is added. Zero means immediately. .sp 1 -end is the latest time at which the shutdown should be performed if active sessions are still running. If it starts with a plus\-sign, the start time is added. Minus one means wait infinitely. If end is through and active sessions are still running, \fBKDM\fP can do one of the following: +end is the latest time at which the shutdown should be performed if active sessions are still running. If it starts with a plus\-sign, the start time is added. Minus one means wait infinitely. If end is through and active sessions are still running, \fBTDM\fP can do one of the following: .RS 3 - "cancel" \- give up the shutdown. .br @@ -203,10 +203,10 @@ The entries are comma\-separated tuples of: \- New fields might be added later. .RE .SH SEE ALSO -.BR kdm (1) +.BR tdm (1) .TP -.I /opt/kde3/share/doc/kdm/README.gz -Information about the command sockets (and \fBkdm\fP) +.I /opt/kde3/share/doc/tdm/README.gz +Information about the command sockets (and \fBtdm\fP) .SH AUTHORS .nf Oswald Buddenhagen diff --git a/ubuntu/maverick_automake/kdebase/debian/man/krootimage-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/krootimage-kde3.1 index 2b683c19e..66464cf62 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/krootimage-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/krootimage-kde3.1 @@ -2,11 +2,11 @@ .TH KROOTIMAGE 1 "June 2006" "K Desktop Environment" "helper program" .SH NAME krootimage -\- set desktop background for kdm +\- set desktop background for tdm .SH SYNOPSIS \fBkrootimage\fP [Qt\-options] [KDE\-options] config .SH DESCRIPTION -\fBkrootimage\fP is a helper program for \fBkdm\fP to set the desktop background. +\fBkrootimage\fP is a helper program for \fBtdm\fP to set the desktop background. .SH OPTIONS .SS .SS Arguments: @@ -135,7 +135,7 @@ sets the application GUI style sets the client geometry of the main widget \- see man X for the argument format .SS .SH SEE ALSO -.BR kdm (1) +.BR tdm (1) .SH AUTHORS .nf Matthias Hoelzer\-Kluepfel diff --git a/ubuntu/maverick_automake/kdebase/debian/man/startkde-kde3.1 b/ubuntu/maverick_automake/kdebase/debian/man/startkde-kde3.1 index f26b7f128..bb279319f 100644 --- a/ubuntu/maverick_automake/kdebase/debian/man/startkde-kde3.1 +++ b/ubuntu/maverick_automake/kdebase/debian/man/startkde-kde3.1 @@ -12,7 +12,7 @@ This manual page was written for the Debian distribution because the original program does not have a manual page. .PP The \fBstartkde\fP script starts up the K Desktop Environment and -is typically executed by your login manager (e.g. xdm, gdm, kdm, wdm or from +is typically executed by your login manager (e.g. xdm, gdm, tdm, wdm or from your X startup scripts). \fBstartkde\fP in turn launches ksmserver, which will load your last session, or a default session that includes the standard KDE programs if no saved session is available. -- cgit v1.2.1