summaryrefslogtreecommitdiffstats
path: root/lilo-config/qt
diff options
context:
space:
mode:
Diffstat (limited to 'lilo-config/qt')
-rw-r--r--lilo-config/qt/Details.cpp24
-rw-r--r--lilo-config/qt/Details.h23
-rw-r--r--lilo-config/qt/InputBox.cpp14
-rw-r--r--lilo-config/qt/InputBox.h5
-rw-r--r--lilo-config/qt/standalone.cpp8
-rw-r--r--lilo-config/qt/standalone.h5
6 files changed, 41 insertions, 38 deletions
diff --git a/lilo-config/qt/Details.cpp b/lilo-config/qt/Details.cpp
index 944ba0d..6b4e50a 100644
--- a/lilo-config/qt/Details.cpp
+++ b/lilo-config/qt/Details.cpp
@@ -32,13 +32,13 @@
#include <tqlabel.h>
#include <ui.h>
-Details::Details(liloimage *lilo, TQWidget *parent, const char *name, WFlags f):TQDialog(parent, name, true, f)
+Details::Details(liloimage *lilo, TQWidget *tqparent, const char *name, WFlags f):TQDialog(tqparent, name, true, f)
{
l=lilo;
- TQVBoxLayout *layout=new TQVBoxLayout(this);
- layout->setMargin(SPACE_MARGIN);
- layout->setSpacing(SPACE_INSIDE);
+ TQVBoxLayout *tqlayout=new TQVBoxLayout(this);
+ tqlayout->setMargin(SPACE_MARGIN);
+ tqlayout->setSpacing(SPACE_INSIDE);
TQHBox *vgab=new TQHBox(this);
TQLabel *vlbl=new TQLabel(_("&Graphics mode on text console:"), vgab);
@@ -71,15 +71,15 @@ Details::Details(liloimage *lilo, TQWidget *parent, const char *name, WFlags f):
vga->insertItem(_("VGA 1280x1024, 32767 colors (793)"));
vga->insertItem(_("VGA 1280x1024, 65536 colors (794)"));
vga->insertItem(_("VGA 1280x1024, 16.7M colors (795)"));
- layout->addWidget(vgab);
+ tqlayout->addWidget(vgab);
readonly=new TQCheckBox(_("Mount root filesystem &read-only"), this);
TQWhatsThis::add(readonly, _("Mount the root filesystem for this kernel read-only. Since the init scripts normally take care of remounting the root filesystem in read-write mode after running some checks, this should always be turned on.<br>Don't turn this off unless you know what you're doing."));
- layout->addWidget(readonly);
+ tqlayout->addWidget(readonly);
unsafe=new TQCheckBox(_("Do not check &partition table"), this);
TQWhatsThis::add(unsafe, _("This turns off some sanity checks while writing the configuration. This shouldn't be used under \"normal\" circumstances, but it's useful, for example, for installing the possibility to boot from a floppy disk without having a floppy in the drive every time you run lilo.<br>This sets the <i>unsafe</i> keyword in lilo.conf."));
- layout->addWidget(unsafe);
+ tqlayout->addWidget(unsafe);
TQHBox *opts=new TQHBox(this);
lock=new TQCheckBox(_("&Record boot command lines for defaults"), opts);
@@ -87,7 +87,7 @@ Details::Details(liloimage *lilo, TQWidget *parent, const char *name, WFlags f):
restricted=new TQCheckBox(_("R&estrict parameters"), opts);
connect(restricted, TQT_SIGNAL(clicked()), TQT_SLOT(check_pw()));
TQWhatsThis::add(restricted, _("If this box is checked, a password (entered below) is required only if any parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>linux single</i> or <i>linux init=/bin/sh</i>).\nThis sets the <b>restricted</b> option in lilo.conf."));
- layout->addWidget(opts);
+ tqlayout->addWidget(opts);
TQHBox *pw=new TQHBox(this);
use_password=new TQCheckBox(_("Require &password:"), pw);
@@ -96,12 +96,12 @@ Details::Details(liloimage *lilo, TQWidget *parent, const char *name, WFlags f):
password->setMaxLength(15);
password->setEchoMode(TQLineEdit::Password);
TQWhatsThis::add(pw, _("Enter the password required for bootup (if any) here. If <i>restricted</i> above is checked, the password is required for additional parameters only.<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. You'll want to make sure nobody untrusted can read this file. Also, you probably don't want to use your normal/root password here."));
- layout->addWidget(pw);
+ tqlayout->addWidget(pw);
TQHBox *btns=new TQHBox(this);
ok=new TQPushButton(_("&OK"), btns);
cancel=new TQPushButton(_("&Cancel"), btns);
- layout->addWidget(btns);
+ tqlayout->addWidget(btns);
connect(cancel, TQT_SIGNAL(clicked()), TQT_SLOT(reject()));
connect(ok, TQT_SIGNAL(clicked()), TQT_SLOT(accept()));
@@ -113,7 +113,7 @@ Details::Details(liloimage *lilo, TQWidget *parent, const char *name, WFlags f):
vga->setCurrentItem(1);
else
for(int i=0; i<vga->count(); i++) {
- if(vga->text(i).contains("(" + mode + ")")) {
+ if(vga->text(i).tqcontains("(" + mode + ")")) {
vga->setCurrentItem(i);
break;
}
@@ -137,7 +137,7 @@ TQString Details::vgaMode() const
if(s=="default")
return "";
else if(s!="ask") {
- s=s.mid(s.find('(')+1);
+ s=s.mid(s.tqfind('(')+1);
s=s.left(s.length()-1);
}
return s;
diff --git a/lilo-config/qt/Details.h b/lilo-config/qt/Details.h
index c7c7f98..079a83a 100644
--- a/lilo-config/qt/Details.h
+++ b/lilo-config/qt/Details.h
@@ -32,11 +32,12 @@
#include <tqcombobox.h>
#include <tqlineedit.h>
#include <tqpushbutton.h>
-class Details:public QDialog
+class Details:public TQDialog
{
Q_OBJECT
+ TQ_OBJECT
public:
- Details(liloimage *lilo, TQWidget *parent=0, const char *name=0, WFlags f=0);
+ Details(liloimage *lilo, TQWidget *tqparent=0, const char *name=0, WFlags f=0);
bool isReadOnly() const { return readonly->isChecked(); };
TQString vgaMode() const;
bool isUnsafe() const { return unsafe->isChecked(); };
@@ -48,14 +49,14 @@ private slots:
void check_pw();
private:
liloimage *l;
- QCheckBox *readonly;
- QComboBox *vga;
- QCheckBox *unsafe;
- QCheckBox *lock;
- QCheckBox *restricted;
- QCheckBox *use_password;
- QLineEdit *password;
- QPushButton *ok;
- QPushButton *cancel;
+ TQCheckBox *readonly;
+ TQComboBox *vga;
+ TQCheckBox *unsafe;
+ TQCheckBox *lock;
+ TQCheckBox *restricted;
+ TQCheckBox *use_password;
+ TQLineEdit *password;
+ TQPushButton *ok;
+ TQPushButton *cancel;
};
#endif
diff --git a/lilo-config/qt/InputBox.cpp b/lilo-config/qt/InputBox.cpp
index 9836a91..a8aaa1d 100644
--- a/lilo-config/qt/InputBox.cpp
+++ b/lilo-config/qt/InputBox.cpp
@@ -31,26 +31,26 @@
#include <tqwhatsthis.h>
#include <ui.h>
-InputBox::InputBox(entries e, TQWidget *parent, const char *name, bool hasCancel, WFlags f):TQDialog(parent, name, true, f)
+InputBox::InputBox(entries e, TQWidget *tqparent, const char *name, bool hasCancel, WFlags f):TQDialog(tqparent, name, true, f)
{
- TQVBoxLayout *layout=new TQVBoxLayout(this);
- layout->setMargin(SPACE_MARGIN);
- layout->setSpacing(SPACE_INSIDE);
+ TQVBoxLayout *tqlayout=new TQVBoxLayout(this);
+ tqlayout->setMargin(SPACE_MARGIN);
+ tqlayout->setSpacing(SPACE_INSIDE);
for(entries::iterator it=e.begin(); it!=e.end(); it++) {
EditWidget *ed=new EditWidget((*it).label, (*it).dflt, (*it).isFile, this);
TQWhatsThis::add(ed, (*it).help);
- layout->addWidget(ed);
+ tqlayout->addWidget(ed);
edit.insert(edit.end(), ed);
}
if(hasCancel) {
TQHBox *btns=new TQHBox(this);
ok=new TQPushButton(_("&OK"), btns);
cancel=new TQPushButton(_("&Cancel"), btns);
- layout->addWidget(btns);
+ tqlayout->addWidget(btns);
connect(cancel, TQT_SIGNAL(clicked()), TQT_SLOT(reject()));
} else {
ok=new TQPushButton(_("&OK"), this);
- layout->addWidget(ok);
+ tqlayout->addWidget(ok);
}
connect(ok, TQT_SIGNAL(clicked()), TQT_SLOT(accept()));
}
diff --git a/lilo-config/qt/InputBox.h b/lilo-config/qt/InputBox.h
index f4be6e9..1a624c8 100644
--- a/lilo-config/qt/InputBox.h
+++ b/lilo-config/qt/InputBox.h
@@ -33,13 +33,14 @@
#include <tqpushbutton.h>
#include "EditWidget.h"
#include <list>
-class InputBox:public QDialog
+class InputBox:public TQDialog
{
Q_OBJECT
+ TQ_OBJECT
public:
typedef struct { TQString label; TQString dflt; bool isFile; TQString help; } entry;
typedef std::list<entry> entries;
- InputBox(entries e, TQWidget *parent=0, const char *name=0, bool hasCancel=true, WFlags f=0);
+ InputBox(entries e, TQWidget *tqparent=0, const char *name=0, bool hasCancel=true, WFlags f=0);
TQStringList const text() const { TQStringList s; for(std::list<EditWidget*>::const_iterator it=edit.begin(); it!=edit.end(); it++) s << (*it)->text(); return s; };
private:
std::list<EditWidget*> edit;
diff --git a/lilo-config/qt/standalone.cpp b/lilo-config/qt/standalone.cpp
index 4dc73e2..acab064 100644
--- a/lilo-config/qt/standalone.cpp
+++ b/lilo-config/qt/standalone.cpp
@@ -33,7 +33,7 @@
#include <ui.h>
#include "standalone.moc"
-Standalone::Standalone(TQWidget *parent, const char *name):TQWidget(parent,name)
+Standalone::Standalone(TQWidget *tqparent, const char *name):TQWidget(tqparent,name)
{
m=new MainWidget(this);
connect(m, TQT_SIGNAL(configChanged()), TQT_SLOT(configChanged()));
@@ -62,14 +62,14 @@ Standalone::Standalone(TQWidget *parent, const char *name):TQWidget(parent,name)
TQWhatsThis::add(_cancel, _("This button exits the program without saving your changes."));
connect(_cancel, TQT_SIGNAL(clicked()), this, TQT_SLOT(cancel()));
_apply->setEnabled(false);
- setMinimumWidth(actions->sizeHint().width()+10);
+ setMinimumWidth(actions->tqsizeHint().width()+10);
arrangeWidgets();
}
void Standalone::arrangeWidgets()
{
- m->setGeometry(SPACE_MARGIN, SPACE_MARGIN, width()-2*SPACE_MARGIN, height()-actions->sizeHint().height()-SPACE_MARGIN-SPACE_INSIDE);
- actions->setGeometry(SPACE_MARGIN, height()-actions->sizeHint().height()-SPACE_MARGIN, width()-2*SPACE_MARGIN, actions->sizeHint().height());
+ m->setGeometry(SPACE_MARGIN, SPACE_MARGIN, width()-2*SPACE_MARGIN, height()-actions->tqsizeHint().height()-SPACE_MARGIN-SPACE_INSIDE);
+ actions->setGeometry(SPACE_MARGIN, height()-actions->tqsizeHint().height()-SPACE_MARGIN, width()-2*SPACE_MARGIN, actions->tqsizeHint().height());
}
void Standalone::resizeEvent(TQResizeEvent *e)
diff --git a/lilo-config/qt/standalone.h b/lilo-config/qt/standalone.h
index 3d5c4bf..2131b2a 100644
--- a/lilo-config/qt/standalone.h
+++ b/lilo-config/qt/standalone.h
@@ -32,11 +32,12 @@
#include <tqhbuttongroup.h>
#include <tqevent.h>
#include "mainwidget.h"
-class Standalone: public QWidget
+class Standalone: public TQWidget
{
Q_OBJECT
+ TQ_OBJECT
public:
- Standalone(TQWidget *parent=0, const char *name=0);
+ Standalone(TQWidget *tqparent=0, const char *name=0);
void resizeEvent(TQResizeEvent *e);
public slots:
void whatsthis();
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-07 17:10:09 +0000