Finish moving kinfocenter files to kcontrol.

This partially resolves bug report 289.

54 files changed, 1438 insertions, 0 deletions

diff --git a/doc/kcontrol/cdinfo/CMakeLists.txt b/doc/kcontrol/cdinfo/CMakeLists.txt
new file mode 100644
index 000000000..e4cfd45b9
--- /dev/null
+++ b/doc/kcontrol/cdinfo/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/cdinfo )
diff --git a/doc/kcontrol/cdinfo/Makefile.am b/doc/kcontrol/cdinfo/Makefile.am
new file mode 100644
index 000000000..318cb35a6
--- /dev/null
+++ b/doc/kcontrol/cdinfo/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/cdinfo
diff --git a/doc/kcontrol/cdinfo/index.docbook b/doc/kcontrol/cdinfo/index.docbook
new file mode 100644
index 000000000..6048e5873
--- /dev/null
+++ b/doc/kcontrol/cdinfo/index.docbook
@@ -0,0 +1,51 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>CD-ROM Information/Capabilities</title>
+<articleinfo>
+
+<authorgroup>
+<author>
+<firstname>Jahshan</firstname>
+<surname>Bhatti</surname>
+<affiliation><address><email>jabhatti91@gmail.com</email></address></affiliation>
+</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+    
+<date>2006-06-13</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>cd-rom</keyword>
+<keyword>capabilities information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>CD-ROM Information/Capabilities</title>
+
+<para>
+This page displays information about the attached CD-ROM drives and their capabilites,
+</para>
+
+<para>
+On &Linux;, this information is read from <filename
+class="devicefile">/proc/sys/dev/cdrom/info</filename>, which are only available if
+the <filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel.
+</para>
+
+<para>
+The user cannot modify any settings on this page.
+</para>
+
+</sect1>
+</article>
diff --git a/doc/kcontrol/devices/CMakeLists.txt b/doc/kcontrol/devices/CMakeLists.txt
new file mode 100644
index 000000000..5a747385e
--- /dev/null
+++ b/doc/kcontrol/devices/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/devices )
diff --git a/doc/kcontrol/devices/Makefile.am b/doc/kcontrol/devices/Makefile.am
new file mode 100644
index 000000000..f2449c0e0
--- /dev/null
+++ b/doc/kcontrol/devices/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/devices
diff --git a/doc/kcontrol/devices/index.docbook b/doc/kcontrol/devices/index.docbook
new file mode 100644
index 000000000..43eac4de9
--- /dev/null
+++ b/doc/kcontrol/devices/index.docbook
@@ -0,0 +1,60 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Device Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+    
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>device</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>Device Information</title>
+
+<para>
+This page displays information about the available devices,
+</para>
+
+<note>
+<para>
+The exact information displayed is system-dependent.  On some systems,
+device information cannot be displayed yet.
+</para>
+</note>
+
+<para>
+On &Linux;, this information is read from <filename
+class="devicefile">/proc/devices</filename> and <filename
+class="devicefile">/proc/misc</filename>, which are only available if
+the <filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel. Devices are listed by group (Character, Block,
+or Miscellaneous).  The device major number is listed, followed by an
+identifying label.
+</para>
+
+<para>
+The user cannot modify any settings on this page.
+</para>
+
+</sect1>
+</article>
diff --git a/doc/kcontrol/dma/CMakeLists.txt b/doc/kcontrol/dma/CMakeLists.txt
new file mode 100644
index 000000000..2c3752d1c
--- /dev/null
+++ b/doc/kcontrol/dma/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/dma )
diff --git a/doc/kcontrol/dma/Makefile.am b/doc/kcontrol/dma/Makefile.am
new file mode 100644
index 000000000..f8fd8f8e9
--- /dev/null
+++ b/doc/kcontrol/dma/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/dma
diff --git a/doc/kcontrol/dma/index.docbook b/doc/kcontrol/dma/index.docbook
new file mode 100644
index 000000000..415666095
--- /dev/null
+++ b/doc/kcontrol/dma/index.docbook
@@ -0,0 +1,64 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>DMA</acronym> Channel Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>DMA</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title><acronym>DMA</acronym> Channel Information</title>
+
+<para> This page displays information about the <acronym>DMA</acronym>
+(Direct Memory Access) Channels.  A <acronym>DMA</acronym> channel is a
+direct connection that allows devices to transfer data to and from
+memory without going through the processor. Typically, i386-architecture
+systems (<acronym>PC</acronym>'s) have eight <acronym>DMA</acronym>
+channels (0-7).</para>
+
+<note> <para> The exact information displayed is system-dependent.  On
+some systems, <acronym>DMA</acronym> Channel information cannot be
+displayed yet.</para> </note>
+
+<para> On &Linux;, this information is read from <filename
+class="devicefile">/proc/dma</filename>, which is only available if the
+<filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel.</para>
+
+<para> A list of all currently-registered (<acronym>ISA</acronym> bus)
+<acronym>DMA</acronym> channels that are in use is shown. The first
+column shows the <acronym>DMA</acronym> channel, and the second column
+shows the device which uses that channel.</para>
+
+<para>
+Unused <acronym>DMA</acronym> channels are not listed.
+</para>
+
+<para>
+The user cannot modify any settings on this page.
+</para>
+
+</sect1>
+</article>
diff --git a/doc/kcontrol/interrupts/CMakeLists.txt b/doc/kcontrol/interrupts/CMakeLists.txt
new file mode 100644
index 000000000..67690437f
--- /dev/null
+++ b/doc/kcontrol/interrupts/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/interrupts )
diff --git a/doc/kcontrol/interrupts/Makefile.am b/doc/kcontrol/interrupts/Makefile.am
new file mode 100644
index 000000000..5d81a10cd
--- /dev/null
+++ b/doc/kcontrol/interrupts/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/interrupts
diff --git a/doc/kcontrol/interrupts/index.docbook b/doc/kcontrol/interrupts/index.docbook
new file mode 100644
index 000000000..b29611202
--- /dev/null
+++ b/doc/kcontrol/interrupts/index.docbook
@@ -0,0 +1,70 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Interrupt Request (<abbrev>IRQ</abbrev>) Lines</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>IRQ</keyword>
+<keyword>interrupts</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>Interrupt Request (<abbrev>IRQ</abbrev>) Lines in Use</title>
+
+<para>This page displays information about the Interrupt Request
+Lines in use, and the devices that use them.</para>
+
+<para>An <acronym>IRQ</acronym> is a hardware line used in a
+<acronym>PC</acronym> by (<acronym>ISA</acronym> bus) devices like
+keyboards, modems, sound cards, &etc;, to send interrupt signals to the
+processor to tell it that the device is ready to send or accept data.
+Unfortunately, there are  only sixteen <acronym>IRQ</acronym>'s (0-15)
+available in the i386 (<acronym>PC</acronym>) architecture for sharing among
+the various <acronym>ISA</acronym> devices.</para>
+
+<para>Many hardware problems are the result of <acronym>IRQ</acronym>
+conflicts, when two devices try to use the same <acronym>IRQ</acronym>, or
+software is misconfigured to use a different <acronym>IRQ</acronym> from the
+one a device is actually configured for.</para>
+
+<note><para>The exact information displayed is system-dependent.  On some
+systems, <acronym>IRQ</acronym> information cannot be displayed
+ yet.</para></note>
+
+<para>On &Linux;, this information is read from
+<filename class="directory">/proc/interrupts</filename>, which is only
+available if the <filename class="directory">/proc</filename>
+pseudo-filesystem is compiled into the  kernel.</para>
+
+<para>The first column, is the <acronym>IRQ</acronym> number.  The second
+column, is the number of interrupts that have been received since the last
+reboot.  The third column shows the type of interrupt.  The fourth,
+identifies the device assigned to that interrupt.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
+
diff --git a/doc/kcontrol/ioports/CMakeLists.txt b/doc/kcontrol/ioports/CMakeLists.txt
new file mode 100644
index 000000000..c8ca4ced6
--- /dev/null
+++ b/doc/kcontrol/ioports/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/ioports )
diff --git a/doc/kcontrol/ioports/Makefile.am b/doc/kcontrol/ioports/Makefile.am
new file mode 100644
index 000000000..e5f86f7b3
--- /dev/null
+++ b/doc/kcontrol/ioports/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/ioports
diff --git a/doc/kcontrol/ioports/index.docbook b/doc/kcontrol/ioports/index.docbook
new file mode 100644
index 000000000..65bcb1f1e
--- /dev/null
+++ b/doc/kcontrol/ioports/index.docbook
@@ -0,0 +1,64 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>I/O Port</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>ioports</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>Input/Output Port Information</title>
+
+<para>This page displays information about the I/O ports.</para>
+
+<para>I/O Ports are memory addresses used by the processor for direct
+communication with a device that has sent an
+interrupt signal to the processor.</para>
+
+<para>The exchange of commands or data between the processor and the device
+takes place through the I/O port address of the device, which is a
+ hexadecimal
+number.  No two devices can share the same I/O port.  Many devices use
+ multiple
+I/O port addresses, which are expressed as a range of hexadecimal
+numbers.</para>
+
+<note><para>The exact information displayed is system-dependent. On some
+systems, I/O port information can not yet be displayed.</para></note>
+
+<para>On &Linux;, this information is read from <filename
+class="devicefile">/proc/ioports</filename> which is only available if
+the <filename class="devicefile">/proc</filename> pseudo-filesystem is
+compiled into the kernel.  A list of all currently-registered I/O port
+regions that are in use is shown.</para>
+
+<para>The first column is the I/O port (or the range of I/O ports), the
+second column identifies the device that uses these I/O ports.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+</article>
diff --git a/doc/kcontrol/memory/CMakeLists.txt b/doc/kcontrol/memory/CMakeLists.txt
new file mode 100644
index 000000000..7b37cffb2
--- /dev/null
+++ b/doc/kcontrol/memory/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/memory )
diff --git a/doc/kcontrol/memory/Makefile.am b/doc/kcontrol/memory/Makefile.am
new file mode 100644
index 000000000..c63989f33
--- /dev/null
+++ b/doc/kcontrol/memory/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/memory
diff --git a/doc/kcontrol/memory/index.docbook b/doc/kcontrol/memory/index.docbook
new file mode 100644
index 000000000..19d10fc57
--- /dev/null
+++ b/doc/kcontrol/memory/index.docbook
@@ -0,0 +1,108 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Memory Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Mike.McBride;</author>
+
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+
+</authorgroup>
+        
+<date>2002-02-13</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>memory</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>Memory Information</title>
+
+<para>This module displays the current memory usage.  It is updated
+constantly, and can be very useful for pinpointing bottlenecks when certain
+applications  are executed.</para>
+
+<sect2 id="memory-intro">
+<title>Memory Types</title>
+
+<para>The first thing you must understand, is there are two types of
+<quote>memory</quote>, available to the operating system and the programs
+that run within  it.</para>
+
+<para>The first type, is called physical memory.  This is the memory located
+within the memory chips, within your computer.  This is the
+<acronym>RAM</acronym> (for Random Access Memory) you bought when you
+purchased your  computer.</para>
+
+<para>The second type of memory, is called virtual or swap memory.  This
+block of memory, is actually space on the hard drive.  The operating
+system reserves a space on the hard drive for <quote>swap space</quote>.
+The operating system can use this virtual memory (or swap space), if it
+runs out of physical memory.  The reason this is called
+<quote>swap</quote> memory, is the operating system takes some data that
+it doesn't think you will want for a while, and saves that to disk in
+this reserved space.  The operating system then loads the new data you
+need right now.  It has <quote>swapped</quote> the not needed data, for
+the data you need right now.  Virtual or swap memory is not as fast as
+physical memory, so operating systems try to keep data (especially often
+used data), in the physical memory.</para>
+
+<para>The total memory, is the combined total of physical memory and
+virtual memory.</para>
+
+</sect2>
+
+<sect2 id="memory-use">
+<title>Memory Information Module</title>
+
+<para>This window is divided into a top and bottom section</para>
+
+<para>The top section shows you the total physical memory, total free
+ physical memory, shared memory, and buffered memory.</para>
+
+<para>All four values are represented as the total number of bytes, and
+ as the number of megabytes (1 megabyte = slightly more than 1,000,000
+ bytes)</para>
+
+<para>The bottom section shows you three graphs:  </para>
+
+<itemizedlist>
+<listitem><para><guilabel>Total Memory</guilabel> (this is the combination of physical and  virtual memory).</para></listitem>
+<listitem><para><guilabel>Physical Memory</guilabel></para></listitem>
+<listitem><para>Virtual memory, or <guilabel>Swap Space</guilabel>.</para></listitem>
+</itemizedlist>
+
+<para>The green areas are free, and the red areas are used.</para>
+
+<tip><para>The exact values of each type of memory are not critical, and
+ they change regularly.  When you evaluate this page, look at
+ trends.</para>
+
+<para>Does your computer have plenty of free space (green areas)?  If
+ not, you can increase the swap size or increase the physical
+ memory.</para>
+
+<para>Also, if your computer seems sluggish: is your physical memory
+ full, and does the hard drive always seem to be running?  This suggests
+ that you do not have enough physical memory, and your computer is
+ relying on the slower virtual memory for commonly used data. Increasing
+ your physical memory will improve the responsiveness of your
+ computer.</para></tip>
+
+</sect2>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/nics/CMakeLists.txt b/doc/kcontrol/nics/CMakeLists.txt
new file mode 100644
index 000000000..e30c40bf9
--- /dev/null
+++ b/doc/kcontrol/nics/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/nics )
diff --git a/doc/kcontrol/nics/Makefile.am b/doc/kcontrol/nics/Makefile.am
new file mode 100644
index 000000000..eb1c37098
--- /dev/null
+++ b/doc/kcontrol/nics/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/nics
diff --git a/doc/kcontrol/nics/index.docbook b/doc/kcontrol/nics/index.docbook
new file mode 100644
index 000000000..f82552c28
--- /dev/null
+++ b/doc/kcontrol/nics/index.docbook
@@ -0,0 +1,45 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Network Interfaces</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Lauri.Watts;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-11</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>Network</keyword>
+<keyword>Interfaces</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+
+<title>Network Interfaces</title>
+
+<para>
+This page displays information about the network interfaces
+installed in your computer.
+</para>
+
+<note><para>The exact information displayed is system-dependent.  On
+some systems, this information can not yet be displayed.</para></note>
+
+<para>The user cannot modify any settings on this page.</para>
+
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/opengl/CMakeLists.txt b/doc/kcontrol/opengl/CMakeLists.txt
new file mode 100644
index 000000000..aac8e4360
--- /dev/null
+++ b/doc/kcontrol/opengl/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/opengl )
diff --git a/doc/kcontrol/opengl/Makefile.am b/doc/kcontrol/opengl/Makefile.am
new file mode 100644
index 000000000..70f023492
--- /dev/null
+++ b/doc/kcontrol/opengl/Makefile.am
@@ -0,0 +1,2 @@
+KDE_LANG= en
+KDE_DOCS = kcontrol/opengl
diff --git a/doc/kcontrol/opengl/index.docbook b/doc/kcontrol/opengl/index.docbook
new file mode 100644
index 000000000..2c972034a
--- /dev/null
+++ b/doc/kcontrol/opengl/index.docbook
@@ -0,0 +1,47 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>OpenGL</acronym></title>
+<articleinfo>
+
+<authorgroup>
+<author><personname><firstname>Ilya</firstname><surname>Korniyko</surname></personname><email>k_ilya@ukr.net</email></author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+
+</authorgroup>
+
+<date></date>
+<releaseinfo></releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>OpenGL</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="opengl">
+
+<title>OpenGL</title>
+
+<para>This page displays information about installed <acronym>OpenGL</acronym> implementation.
+OpenGL (for "Open Graphics Library") is a cross-platform, 
+hardware independent interface for 3D graphics.</para>
+
+<para><acronym>GLX</acronym> is the binding for OpenGL to X Window system.</para>
+
+<para> <acronym>DRI</acronym> (Direct Rendering Infrastucture) provides hardware acceleration for OpenGL. 
+You must have a videocard with 3D accelerator and properly installed driver for this.</para>
+<para> </para>
+
+<para>Read more at the official OpenGL site <ulink url="http://www.opengl.org">http://www.opengl.org</ulink> </para>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/partitions/CMakeLists.txt b/doc/kcontrol/partitions/CMakeLists.txt
new file mode 100644
index 000000000..a436214de
--- /dev/null
+++ b/doc/kcontrol/partitions/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/partitions )
diff --git a/doc/kcontrol/partitions/Makefile.am b/doc/kcontrol/partitions/Makefile.am
new file mode 100644
index 000000000..fb019e7ee
--- /dev/null
+++ b/doc/kcontrol/partitions/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/partitions
diff --git a/doc/kcontrol/partitions/index.docbook b/doc/kcontrol/partitions/index.docbook
new file mode 100644
index 000000000..f3655a8cf
--- /dev/null
+++ b/doc/kcontrol/partitions/index.docbook
@@ -0,0 +1,56 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Partition Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>drive partition</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>Partition Information</title>
+
+<para>This page displays information about partitions on your hard
+drives.</para>
+
+<note><para>The exact information displayed is system-dependent.  On
+some systems, partition information cannot be displayed
+yet.</para></note>
+
+<para>On &Linux;, this information is read from <filename
+class="devicefile">/proc/partitions</filename>, which is only available
+if the <filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the (2.1.x or later) kernel.</para>
+
+<para>The first two columns are the major and minor numbers
+respectively.  The third column is the number of blocks (usually 1
+block = 1024 bytes).  The fourth column is a label for the
+device.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
+
diff --git a/doc/kcontrol/pci/CMakeLists.txt b/doc/kcontrol/pci/CMakeLists.txt
new file mode 100644
index 000000000..abe1d7856
--- /dev/null
+++ b/doc/kcontrol/pci/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/pci )
diff --git a/doc/kcontrol/pci/Makefile.am b/doc/kcontrol/pci/Makefile.am
new file mode 100644
index 000000000..45f7b2968
--- /dev/null
+++ b/doc/kcontrol/pci/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/pci
diff --git a/doc/kcontrol/pci/index.docbook b/doc/kcontrol/pci/index.docbook
new file mode 100644
index 000000000..1d4d8b3f9
--- /dev/null
+++ b/doc/kcontrol/pci/index.docbook
@@ -0,0 +1,57 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>PCI</acronym>-bus and Installed <acronym>PCI</acronym> Cards</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>PCI</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="pci">
+
+<title><acronym>PCI</acronym>-bus and Installed <acronym>PCI</acronym>
+Cards</title>
+
+<para>This page displays information about the
+<acronym>PCI</acronym>-bus and installed <acronym>PCI</acronym> cards,
+and other devices that use the Peripheral Component Interconnect
+(<acronym>PCI</acronym>) bus.</para>
+
+<note><para>The exact information displayed is system-dependent. On some
+systems, <acronym>PCI</acronym>-information can not yet be
+displayed.</para> </note>
+
+<para>On &Linux;, this information is read from <filename
+class="devicefile">/proc/pci</filename> which is only available if the
+<filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel.  A listing of all <acronym>PCI</acronym>
+devices found during kernel initialization, and their configuration, is
+shown.</para>
+
+<para>Each entry begins with a bus, device and function number.</para>
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/pcmcia/CMakeLists.txt b/doc/kcontrol/pcmcia/CMakeLists.txt
new file mode 100644
index 000000000..c956d5b11
--- /dev/null
+++ b/doc/kcontrol/pcmcia/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/pcmcia )
diff --git a/doc/kcontrol/pcmcia/Makefile.am b/doc/kcontrol/pcmcia/Makefile.am
new file mode 100644
index 000000000..b13b11f46
--- /dev/null
+++ b/doc/kcontrol/pcmcia/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/pcmcia
diff --git a/doc/kcontrol/pcmcia/index.docbook b/doc/kcontrol/pcmcia/index.docbook
new file mode 100644
index 000000000..901fdf2e5
--- /dev/null
+++ b/doc/kcontrol/pcmcia/index.docbook
@@ -0,0 +1,38 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>PCMCIA</acronym></title>
+<articleinfo>
+
+<authorgroup>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>Laptop</keyword>
+<keyword>PCMCIA</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="pcmcia">
+<title><acronym>PCMCIA</acronym></title>
+
+<para>This module displays information about <acronym>PCMCIA</acronym>
+Cards</para>
+
+<para>The exact information is system dependent.  On most systems no
+information is displayed at all.</para>
+
+</sect1>
+</article>
diff --git a/doc/kcontrol/processor/CMakeLists.txt b/doc/kcontrol/processor/CMakeLists.txt
new file mode 100644
index 000000000..25f3ff798
--- /dev/null
+++ b/doc/kcontrol/processor/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/processor )
diff --git a/doc/kcontrol/processor/Makefile.am b/doc/kcontrol/processor/Makefile.am
new file mode 100644
index 000000000..d42fb2991
--- /dev/null
+++ b/doc/kcontrol/processor/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/processor
diff --git a/doc/kcontrol/processor/index.docbook b/doc/kcontrol/processor/index.docbook
new file mode 100644
index 000000000..3794aca67
--- /dev/null
+++ b/doc/kcontrol/processor/index.docbook
@@ -0,0 +1,56 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Processor Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>CPU</keyword>
+<keyword>processor</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="processor">
+<title>Processor Information</title>
+
+<para>This page displays information about the system 
+Central Processing Unit (<acronym>CPU</acronym>).</para>
+
+<note><para>The exact information displayed is system-dependent.  On
+some systems, processor information cannot be displayed
+yet.</para></note>
+
+<para>On &Linux;, this information is read from <filename
+class="devicefile">/proc/cpuinfo</filename>, which is only available if
+the <filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel.</para>
+
+<para>The exact contents of the window will depend on the
+<acronym>CPU</acronym>(s) in your machine, but the window is organized
+into two columns.  The first column is the parameter, and the second
+column is the value of that parameter.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/protocols/CMakeLists.txt b/doc/kcontrol/protocols/CMakeLists.txt
new file mode 100644
index 000000000..51032628c
--- /dev/null
+++ b/doc/kcontrol/protocols/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/protocols )
diff --git a/doc/kcontrol/protocols/Makefile.am b/doc/kcontrol/protocols/Makefile.am
new file mode 100644
index 000000000..f46684563
--- /dev/null
+++ b/doc/kcontrol/protocols/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/protocols
diff --git a/doc/kcontrol/protocols/index.docbook b/doc/kcontrol/protocols/index.docbook
new file mode 100644
index 000000000..c84aef578
--- /dev/null
+++ b/doc/kcontrol/protocols/index.docbook
@@ -0,0 +1,39 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Protocols</title>
+
+<articleinfo>
+<authorgroup>
+<author>&Lauri.Watts;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>Protocols</keyword>
+<keyword>IOSlaves</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="protocols">
+<title>Protocols</title>
+
+<para>On the left of the panel you will see a list of the IOSlaves that
+are installed on your system.  IOSlaves are how &tde; applications
+<quote>talk</quote> to other computers, other applications, or act on
+files.</para>
+
+<para>Clicking on an IOSlave name will display some help information
+about that IOSlave, such as how to use it, and what it does.</para>
+
+<para>The protocols module is purely informational, you cannot change
+any settings here.</para>
+
+</sect1>
+</article>
\ No newline at end of file
diff --git a/doc/kcontrol/samba/CMakeLists.txt b/doc/kcontrol/samba/CMakeLists.txt
new file mode 100644
index 000000000..568062e6c
--- /dev/null
+++ b/doc/kcontrol/samba/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/samba )
diff --git a/doc/kcontrol/samba/Makefile.am b/doc/kcontrol/samba/Makefile.am
new file mode 100644
index 000000000..126a8b41b
--- /dev/null
+++ b/doc/kcontrol/samba/Makefile.am
@@ -0,0 +1,4 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/samba
+
diff --git a/doc/kcontrol/samba/index.docbook b/doc/kcontrol/samba/index.docbook
new file mode 100644
index 000000000..69d7b91b9
--- /dev/null
+++ b/doc/kcontrol/samba/index.docbook
@@ -0,0 +1,207 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Samba Status Information</title>
+<articleinfo>
+<authorgroup>
+<author>&Alexander.Neundorf;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup> 
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>Samba</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="sambastatus">
+
+
+<title>Samba Status Information</title>
+
+<para>The Samba and <acronym>NFS</acronym> Status Monitor is a front end
+to the programs <command>smbstatus</command> and
+<command>showmount</command>.  Smbstatus reports on current Samba
+connections, and is part of the suite of Samba tools, which implements
+the <acronym>SMB</acronym> (Session Message Block) protocol, also called
+the NetBIOS or LanManager protocol.</para>
+
+<para>This protocol can be used to provide printer sharing or drive
+sharing services on a network including machines running the various
+flavors of &Microsoft; &Windows;.</para>
+
+<para><command>showmount</command> is part of the <acronym>NFS</acronym>
+software package. <acronym>NFS</acronym> stands for Network File System
+and is the traditional &UNIX; way to share folders over the
+network. In this case the output of <command>showmount</command>
+<option>-a localhost</option> is parsed. On some systems showmount is in
+<filename class="directory">/usr/sbin</filename>, check if you have
+showmount in your <envar>PATH</envar>.</para>
+
+<sect2 id="smb-exports">
+<title>Exports</title>
+
+<para>On this page you can see a big list which shows the currently
+active connections to Samba shares and <acronym>NFS</acronym> exports of
+your machine.  The first column shows you whether the resource is a Samba
+(<acronym>SMB</acronym>) share or a <acronym>NFS</acronym> export. The
+second column contains the name of the share, the third the name of the
+remote host, which accesses this share. The remaining columns have only
+a meaning for Samba-shares.</para>
+
+<para>The fourth column contains the User <abbrev>ID</abbrev> of the
+user, who accesses this share. Note that this does not have to be equal
+to the &UNIX; user <abbrev>ID</abbrev> of this user. The same applies
+for the next column, which displays the group <abbrev>ID</abbrev> of the
+user.</para>
+
+<para>Each connection to one of your shares is handled by a single
+process (<command>smbd</command>), the next column shows the process
+<abbrev>ID</abbrev> (<acronym>pid</acronym>) of this
+<command>smbd</command>. If you kill this process the connected user
+will be disconnected. If the remote user works from &Windows;, as soon
+as this process is killed a new one will be created, so he will almost
+not notice it.</para>
+
+<para>The last column shows how many files this user has currently open.
+Here you see only, how many files he has <emphasis>open</emphasis> just
+now, you don't see how many he copied or formerly opened &etc;</para>
+
+</sect2>
+
+<sect2 id="smb-imports">
+<title>Imports</title>
+
+<para> Here you see which Samba- and <acronym>NFS</acronym>-shares from
+other hosts are mounted on your local system. The first column shows
+wether it is a Samba- or <acronym>NFS</acronym>-share, the second column
+displays the name of the share, and the third shows where it is
+mounted.</para>
+
+<para>The mounted <acronym>NFS</acronym>-shares you should see on
+&Linux; (this has been tested), and it should also work on &Solaris;
+(this has not been tested).</para>
+
+</sect2>
+
+<sect2 id="smb-log"> 
+<title>Log</title> 
+
+<para>This page presents the contents of your local samba log file in a
+nice way. If you open this page, the list will be empty.  You have to
+press the <guibutton>Update</guibutton> button, then the samba log file
+will be read and the results displayed. Check whether the samba log file
+on your system is really at the location as specified in the input
+line. If it is somewhere else or if it has another name, correct
+it. After changing the file name you have to press
+<guibutton>Update</guibutton> again.</para>
+
+<para>Samba logs its actions according to the log level (see
+<filename>smb.conf</filename>).  If loglevel = 1, samba logs only when
+somebody connects to your machine and when this connection is closed
+again. If log level = 2, it logs also if somebody opens a file and if he
+closes the file again.  If the log level is higher than 2, yet more
+stuff is logged.</para>
+
+<para>If you are interested in who accesses your machine, and which
+files are accessed, you should set the log level to 2 and regularly
+create a new samba log file (&eg; set up a <command>cron</command> task
+which once a week moves your current samba log file into another
+folder or something like that). Otherwise your samba log file may
+become very big.</para>
+
+<para>With the four checkboxes below the big list you can decide, which
+events are displayed in the list. You have to press
+<guibutton>Update</guibutton> to see the results.  If the log level of
+your samba is too low, you won't see everything.</para>
+
+<para>By clicking on the header of one column you can sort the list by
+this column.</para>
+
+</sect2>
+
+
+<sect2 id="smb-statistics">
+<title>Statistics</title>
+
+<para>On this page you can filter the contents of the third page for
+certain contents.</para>
+
+<para>Let's say the <guilabel>Event</guilabel> field (not the one in the
+list) is set to <userinput>Connection</userinput>,
+<guilabel>Service/File</guilabel> is set to <userinput>*</userinput>,
+<guilabel>Host/User</guilabel> is set to <userinput>*</userinput>,
+<guilabel>Show expanded service info</guilabel> is disabled and
+<guilabel>Show expanded host info</guilabel> is disabled.</para>
+
+<para>If you press <guibutton>Update</guibutton> now, you will see how
+often a connection was opened to share <literal>*</literal> (&ie; to any
+share) from host <literal>*</literal> (&ie; from any host).  Now enable
+<guilabel>Show expanded host info</guilabel> and press
+<guibutton>Update</guibutton> again.  Now you will see for every host
+which matches the wildcard <literal>*</literal>, how many connections
+were opened by him.</para>
+
+<para>Now press <guibutton>clear</guibutton>.</para>
+
+<para>Now set the <guilabel>Event</guilabel> field to File Access and
+enable <guilabel>Show expanded service info</guilabel> and press
+<guibutton>Update</guibutton> again.</para>
+
+<para>Now you will see how often every single file was accessed. If you
+enable <guilabel>Show expanded host info</guilabel> too, you will see
+how often every single user opened each file.</para>
+
+<para>In the input lines <guilabel>Service/File</guilabel> and
+<guilabel>Host/User</guilabel> you can use the wildcards
+<literal>*</literal> and <literal>?</literal> in the same way you use
+them at the command line.  Regular expressions are not
+recognized.</para>
+
+<para>By clicking on the header of a column you can sort the list by
+this column.  This way you can check out which file was opened most
+often, or which user opened the most files or whatever.</para>
+
+</sect2>
+
+
+<sect2 id="smb-stat-author">
+<title>Section Author</title>
+
+<para>Module copyright 2000: Michael Glauche and &Alexander.Neundorf; &Alexander.Neundorf.mail;</para>
+
+<para>Originally written by: Michael Glauche</para>
+
+<para>Currently maintained by: &Alexander.Neundorf; &Alexander.Neundorf.mail;</para>
+
+<itemizedlist>
+<title>Contributors</title>
+<listitem><para>Conversion to kcontrol applet:</para>
+<para>&Matthias.Hoelzer-Kluepfel; &Matthias.Hoelzer-Kluepfel.mail;</para></listitem>
+<listitem><para>Use of <classname>TDEProcess</classname> instead of popen, and more error checking:</para>
+<para>&David.Faure; &David.Faure.mail;</para></listitem>
+<listitem><para>Conversion to tdecmodule, added tab pages 2,3,4, bug
+fixed:</para>
+<para>&Alexander.Neundorf; &Alexander.Neundorf.mail;</para></listitem>
+</itemizedlist>
+
+<para>Documentation copyright 2000 &Alexander.Neundorf; &Alexander.Neundorf.mail;</para>
+
+<para>Documentation translated to docbook by &Mike.McBride; &Mike.McBride.mail;</para>
+
+<!-- TRANS:CREDIT_FOR_TRANSLATORS -->
+
+</sect2>
+</sect1>
+
+</article>
\ No newline at end of file
diff --git a/doc/kcontrol/scsi/CMakeLists.txt b/doc/kcontrol/scsi/CMakeLists.txt
new file mode 100644
index 000000000..1ecefb528
--- /dev/null
+++ b/doc/kcontrol/scsi/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/scsi)
diff --git a/doc/kcontrol/scsi/Makefile.am b/doc/kcontrol/scsi/Makefile.am
new file mode 100644
index 000000000..4a0b433e5
--- /dev/null
+++ b/doc/kcontrol/scsi/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG = en
+KDE_DOCS = kcontrol/scsi
diff --git a/doc/kcontrol/scsi/index.docbook b/doc/kcontrol/scsi/index.docbook
new file mode 100644
index 000000000..87ec0934f
--- /dev/null
+++ b/doc/kcontrol/scsi/index.docbook
@@ -0,0 +1,56 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>SCSI</acronym> Interface Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>SCSI</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="scsi">
+
+<title><acronym>SCSI</acronym> Interface Information</title>
+
+<para>This page displays information about Small Computer Systems
+Interface (<acronym>SCSI</acronym>) Interfaces and the attached
+<acronym>SCSI</acronym> devices.</para>
+
+<note><para>The exact information displayed is system-dependent.  On
+some systems <acronym>SCSI</acronym> information cannot be displayed
+yet.</para></note>
+
+<para>On &Linux;, this information is read from <filename
+class="devicefile">/proc/scsi/scsi</filename>, which is only available
+if the <filename class="directory">/proc</filename> pseudo-filesystem is
+compiled into the kernel.  A listing of all <acronym>SCSI</acronym>
+devices known to the kernel is shown.</para>
+
+<para>The devices are sorted numerically by their host, channel, and
+<acronym>ID</acronym> numbers.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/sound/CMakeLists.txt b/doc/kcontrol/sound/CMakeLists.txt
new file mode 100644
index 000000000..18f11a032
--- /dev/null
+++ b/doc/kcontrol/sound/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/sound )
diff --git a/doc/kcontrol/sound/Makefile.am b/doc/kcontrol/sound/Makefile.am
new file mode 100644
index 000000000..a1a9b851c
--- /dev/null
+++ b/doc/kcontrol/sound/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/sound
diff --git a/doc/kcontrol/sound/index.docbook b/doc/kcontrol/sound/index.docbook
new file mode 100644
index 000000000..de1fd601d
--- /dev/null
+++ b/doc/kcontrol/sound/index.docbook
@@ -0,0 +1,51 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title>Soundcard Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Matthias.Hoelzer-Kluepfel;</author>
+<author>&Helge.Deller;</author>
+<author>&Duncan.Haldane;</author>
+<author>&Mike.McBride;</author>
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>soundcard</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="soundinfo">
+
+<title>Soundcard Information</title>
+
+<para>This page displays information about any soundcards installed in the
+system.</para>
+
+<note><para>The exact information displayed is system-dependent.  On some
+systems, soundcard information cannot be displayed yet.</para></note>
+
+<para>On &Linux;, this information is read either from <filename
+class="devicefile">/dev/sndstat</filename>, if present, or from
+<filename class="devicefile">/proc/sound</filename>, which is only
+available if the <filename class="directory">/proc</filename>
+pseudo-filesystem is compiled into the (2.1.x or later) kernel.</para>
+
+<para>The user cannot modify any settings on this page.</para>
+
+</sect1>
+
+</article>
diff --git a/doc/kcontrol/usb/CMakeLists.txt b/doc/kcontrol/usb/CMakeLists.txt
new file mode 100644
index 000000000..7be562cd5
--- /dev/null
+++ b/doc/kcontrol/usb/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/usb )
diff --git a/doc/kcontrol/usb/Makefile.am b/doc/kcontrol/usb/Makefile.am
new file mode 100644
index 000000000..2d7f2a44c
--- /dev/null
+++ b/doc/kcontrol/usb/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/usb
diff --git a/doc/kcontrol/usb/index.docbook b/doc/kcontrol/usb/index.docbook
new file mode 100644
index 000000000..8936fa796
--- /dev/null
+++ b/doc/kcontrol/usb/index.docbook
@@ -0,0 +1,43 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;">
+<title><acronym>USB</acronym></title>
+<articleinfo>
+
+<authorgroup>
+<author>
+<firstname></firstname>
+<surname></surname>
+</author>
+
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KControl</keyword>
+<keyword>USB</keyword>
+<keyword>System Information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1 id="usb">
+
+<title><acronym>USB</acronym></title>
+
+<para>This module allows you to see the devices attached to your
+<acronym>USB</acronym> bus(es).</para>
+
+<para>This module is for information only, you cannot edit any
+information you see here.</para>
+</sect1>
+
+</article>
\ No newline at end of file
diff --git a/doc/kcontrol/xserver/CMakeLists.txt b/doc/kcontrol/xserver/CMakeLists.txt
new file mode 100644
index 000000000..e33cbe3ea
--- /dev/null
+++ b/doc/kcontrol/xserver/CMakeLists.txt
@@ -0,0 +1,12 @@
+#################################################
+#
+#  (C) 2010-2011 Serghei Amelian
+#  serghei (DOT) amelian (AT) gmail.com
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+tde_create_handbook( DESTINATION kcontrol/xserver )
diff --git a/doc/kcontrol/xserver/Makefile.am b/doc/kcontrol/xserver/Makefile.am
new file mode 100644
index 000000000..9d915d89f
--- /dev/null
+++ b/doc/kcontrol/xserver/Makefile.am
@@ -0,0 +1,3 @@
+
+KDE_LANG= en
+KDE_DOCS = kcontrol/xserver
diff --git a/doc/kcontrol/xserver/index.docbook b/doc/kcontrol/xserver/index.docbook
new file mode 100644
index 000000000..a56e47fb3
--- /dev/null
+++ b/doc/kcontrol/xserver/index.docbook
@@ -0,0 +1,56 @@
+<?xml version="1.0" ?>
+<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
+"dtd/kdex.dtd" [
+<!ENTITY % addindex "IGNORE">
+<!ENTITY % English "INCLUDE" > <!-- change language only here -->
+]>
+
+<article lang="&language;" id="xserver">
+<title>X Server Information</title>
+<articleinfo>
+
+<authorgroup>
+<author>&Mike.McBride;</author>
+
+<!-- TRANS:ROLES_OF_TRANSLATORS -->
+
+</authorgroup>
+
+<date>2002-02-12</date>
+<releaseinfo>3.00.00</releaseinfo>
+
+<keywordset>
+<keyword>KDE</keyword>
+<keyword>KControl</keyword>
+<keyword>X server</keyword>
+<keyword>system information</keyword>
+</keywordset>
+</articleinfo>
+
+<sect1>
+<title>X Server Information</title>
+
+<para>This screen is useful for getting specific information about your
+X server and the current session of X.</para>
+
+<para>When you open this module, you are presented with some
+information.  The left hand side of the window is organized into a
+tree. Some of the elements have a plus sign in front of the label.
+Clicking this sign opens a <quote>submenu</quote> related to the
+label.  Clicking on a minus sign in front of a label hides the
+submenu.</para>
+
+<para>The right hand side of the window contains the individual
+values for each of the parameters on the left.</para>
+
+<para>The information presented will vary depending on your
+setup.</para>
+
+<note><para>Some setups may not be able to determine some or all of the
+parameters.</para></note>
+
+<para>You can not change any values from this menu.  It is for
+information only.</para>
+
+</sect1>
+</article>