Add LUKS key management to tdehwmanager

7 files changed, 522 insertions, 3 deletions

diff --git a/kcontrol/hwmanager/CMakeLists.txt b/kcontrol/hwmanager/CMakeLists.txt
index 584eba7bc..8b46dd98e 100644
--- a/kcontrol/hwmanager/CMakeLists.txt
+++ b/kcontrol/hwmanager/CMakeLists.txt
@@ -33,7 +33,8 @@ set_source_files_properties( hwmanager.cpp PROPERTIES COMPILE_FLAGS -DKDE_CONFDI
 
 tde_add_kpart( kcm_hwmanager AUTOMOC
   SOURCES
-    hwmanager.cpp deviceiconview.cpp devicepropsdlg.cpp devicepropsdlgbase.ui hwmanagerbase.ui hwmanager.skel
+    hwmanager.cpp deviceiconview.cpp devicepropsdlg.cpp devicepropsdlgbase.ui hwmanagerbase.ui
+    cryptpassworddlg.cpp cryptpassworddlgbase.ui hwmanager.skel
   LINK tdeio-shared
   DESTINATION ${PLUGIN_INSTALL_DIR}
 )
diff --git a/kcontrol/hwmanager/cryptpassworddlg.cpp b/kcontrol/hwmanager/cryptpassworddlg.cpp
new file mode 100644
index 000000000..43d714e12
--- /dev/null
+++ b/kcontrol/hwmanager/cryptpassworddlg.cpp
@@ -0,0 +1,115 @@
+/* This file is part of TDE
+   Copyright (C) 2015 Timothy Pearson <kb9vqf@pearsoncomputing.net>
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public License
+   along with this library; see the file COPYING.LIB.  If not, write to
+   the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.
+*/
+#include <config.h>
+
+#include <tqradiobutton.h>
+#include <tqpushbutton.h>
+#include <tqvalidator.h>
+#include <tqlineedit.h>
+#include <tqiconset.h>
+#include <tqlabel.h>
+#include <tqtabwidget.h>
+#include <tqgroupbox.h>
+#include <tqlayout.h>
+#include <tqslider.h>
+#include <tqpainter.h>
+#include <tqstyle.h>
+#include <tqfile.h>
+#include <tqinternal_p.h>
+#undef Unsorted // Required for --enable-final (tqdir.h)
+#include <tqfiledialog.h>
+
+#include <kpassdlg.h>
+#include <kbuttonbox.h>
+#include <kcombobox.h>
+#include <tdelocale.h>
+#include <kiconloader.h>
+#include <kurlrequester.h>
+#include <tdeapplication.h>
+#include <klineedit.h>
+#include <kpushbutton.h>
+#include <kstdguiitem.h>
+#include <tdemessagebox.h>
+
+#include "cryptpassworddlg.h"
+
+CryptPasswordDialog::CryptPasswordDialog(TQWidget *parent, TQString passwordPrompt, TQString caption)
+	: KDialogBase(Plain, ((caption == "")?i18n("Enter Password"):caption), Ok|Cancel, Ok, parent, 0L, true, true)
+{
+	m_base = new CryptPasswordDialogBase(plainPage());
+
+	TQGridLayout *mainGrid = new TQGridLayout(plainPage(), 1, 1, 0, spacingHint());
+	mainGrid->setRowStretch(1, 1);
+	mainGrid->addWidget(m_base, 0, 0);
+
+	m_base->passwordPrompt->setText(passwordPrompt);
+	m_base->passwordIcon->setPixmap(SmallIcon("password.png"));
+
+	connect(m_base->textPasswordButton, TQT_SIGNAL(clicked()), this, TQT_SLOT(processLockouts()));
+	connect(m_base->filePasswordButton, TQT_SIGNAL(clicked()), this, TQT_SLOT(processLockouts()));
+	connect(m_base->textPasswordEntry, TQT_SIGNAL(textChanged(const TQString&)), this, TQT_SLOT(processLockouts()));
+	connect(m_base->filePasswordURL, TQT_SIGNAL(textChanged(const TQString&)), this, TQT_SLOT(processLockouts()));
+
+	m_base->textPasswordEntry->setFocus();
+
+	processLockouts();
+}
+
+CryptPasswordDialog::~CryptPasswordDialog()
+{
+}
+
+TQByteArray CryptPasswordDialog::password() {
+	if (m_base->textPasswordButton->isOn() == true) {
+		m_password.duplicate(m_base->textPasswordEntry->password(), strlen(m_base->textPasswordEntry->password()));
+	}
+	else {
+		m_password = TQFile(m_base->filePasswordURL->url()).readAll();
+	}
+
+	return m_password;
+}
+
+void CryptPasswordDialog::processLockouts() {
+	if (m_base->textPasswordButton->isOn() == true) {
+		m_base->textPasswordEntry->setEnabled(true);
+		m_base->filePasswordURL->setEnabled(false);
+		if (strlen(m_base->textPasswordEntry->password()) > 0) {
+			enableButtonOK(true);
+		}
+		else {
+			enableButtonOK(false);
+		}
+	}
+	else {
+		m_base->textPasswordEntry->setEnabled(false);
+		m_base->filePasswordURL->setEnabled(true);
+		if (TQFile(m_base->filePasswordURL->url()).exists()) {
+			enableButtonOK(true);
+		}
+		else {
+			enableButtonOK(false);
+		}
+	}
+}
+
+void CryptPasswordDialog::virtual_hook( int id, void* data )
+{ KDialogBase::virtual_hook( id, data ); }
+
+#include "cryptpassworddlg.moc"
diff --git a/kcontrol/hwmanager/cryptpassworddlg.h b/kcontrol/hwmanager/cryptpassworddlg.h
new file mode 100644
index 000000000..8cec6e55b
--- /dev/null
+++ b/kcontrol/hwmanager/cryptpassworddlg.h
@@ -0,0 +1,61 @@
+/* This file is part of TDE
+   Copyright (C) 2015 Timothy Pearson <kb9vqf@pearsoncomputing.net>
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public License
+   along with this library; see the file COPYING.LIB.  If not, write to
+   the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.
+*/
+#ifndef __cryptpassworddlg_h__
+#define __cryptpassworddlg_h__
+
+#include <kdialogbase.h>
+
+#include "cryptpassworddlgbase.h"
+
+/**
+ *
+ * Dialog to enter LUKS passwords or password files
+ *
+ * @version 0.1
+ * @author Timothy Pearson <kb9vqf@pearsoncomputing.net>
+ */
+
+class TDEUI_EXPORT CryptPasswordDialog : public KDialogBase
+{
+	Q_OBJECT
+public:
+	/**
+	* Create a dialog that allows a user to enter LUKS passwords or password files
+	* @param parent     Parent widget
+	*/
+	CryptPasswordDialog(TQWidget *parent, TQString passwordPrompt, TQString caption=TQString::null);
+	virtual ~CryptPasswordDialog();
+
+	TQByteArray password();
+
+protected:
+	virtual void virtual_hook( int id, void* data );
+
+private slots:
+	void processLockouts();
+
+private:
+	CryptPasswordDialogBase* m_base;
+	TQByteArray m_password;
+
+	class CryptPasswordDialogPrivate;
+	CryptPasswordDialogPrivate* d;
+};
+
+#endif
diff --git a/kcontrol/hwmanager/cryptpassworddlgbase.ui b/kcontrol/hwmanager/cryptpassworddlgbase.ui
new file mode 100644
index 000000000..7c61187ae
--- /dev/null
+++ b/kcontrol/hwmanager/cryptpassworddlgbase.ui
@@ -0,0 +1,132 @@
+<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
+	<class>CryptPasswordDialogBase</class>
+	<widget class="TQWidget">
+		<property name="name">
+			<cstring>CryptPasswordDialogBase</cstring>
+		</property>
+		<grid>
+			<property name="name">
+				<cstring>unnamed</cstring>
+			</property>
+			<widget class="TQLabel" row="0" column="0" colspan="1">
+				<property name="name">
+					<cstring>passwordIcon</cstring>
+				</property>
+				<property name="sizePolicy">
+					<sizepolicy>
+						<hsizetype>4</hsizetype>
+						<vsizetype>5</vsizetype>
+						<horstretch>0</horstretch>
+						<verstretch>0</verstretch>
+					</sizepolicy>
+				</property>
+			</widget>
+			<widget class="TQLabel" row="0" column="1" colspan="1">
+				<property name="name">
+					<cstring>passwordPrompt</cstring>
+				</property>
+				<property name="text">
+					<string></string>
+				</property>
+			</widget>
+			<widget class="TQGroupBox" row="1" column="0" colspan="2">
+				<property name="name">
+					<cstring>passwordProps</cstring>
+				</property>
+				<property name="title">
+					<string>Password Source</string>
+				</property>
+				<grid>
+					<property name="name">
+						<cstring>unnamed</cstring>
+					</property>
+					<widget class="TQButtonGroup" row="0" column="0" colspan="1">
+						<property name="name">
+							<cstring>enabledBox</cstring>
+						</property>
+						<property name="sizePolicy">
+							<sizepolicy>
+								<hsizetype>5</hsizetype>
+								<vsizetype>5</vsizetype>
+								<horstretch>0</horstretch>
+								<verstretch>0</verstretch>
+							</sizepolicy>
+						</property>
+						<property name="frameShape">
+							<enum>NoFrame</enum>
+						</property>
+						<property name="frameShadow">
+							<enum>Plain</enum>
+						</property>
+						<property name="title">
+							<string></string>
+						</property>
+						<property name="exclusive">
+							<bool>true</bool>
+						</property>
+						<property name="radioButtonExclusive">
+							<bool>true</bool>
+						</property>
+						<property name="margin">
+							<number>0</number>
+						</property>
+						<grid>
+							<property name="name">
+								<cstring>unnamed</cstring>
+							</property>
+							<property name="margin">
+								<number>0</number>
+							</property>
+							<widget class="TQRadioButton" row="0" column="0" colspan="1">
+								<property name="name">
+									<cstring>textPasswordButton</cstring>
+								</property>
+								<property name="text">
+									<string>Text:</string>
+								</property>
+								<property name="checked">
+									<bool>true</bool>
+								</property>
+							</widget>
+							<widget class="KPasswordEdit" row="0" column="1" colspan="1">
+								<property name="name">
+									<cstring>textPasswordEntry</cstring>
+								</property>
+							</widget>
+							<widget class="TQRadioButton" row="1" column="0" colspan="1">
+								<property name="name">
+									<cstring>filePasswordButton</cstring>
+								</property>
+								<property name="text">
+									<string>File:</string>
+								</property>
+							</widget>
+							<widget class="KURLRequester" row="1" column="1" colspan="1">
+								<property name="name">
+									<cstring>filePasswordURL</cstring>
+								</property>
+								<property name="filter">
+									<cstring>*</cstring>
+								</property>
+								<property name="mode">
+									<number>17</number>
+								</property>
+							</widget>
+						</grid>
+					</widget>
+				</grid>
+			</widget>
+		</grid>
+	</widget>
+	<includes>
+		<include location="local" impldecl="in implementation">CryptPasswordDialogBase.ui.h</include>
+	</includes>
+	<Q_SLOTS>
+		<slot>enableSupport_toggled(bool)</slot>
+	</Q_SLOTS>
+	<includes>
+		<include location="local" impldecl="in implementation">kdialog.h</include>
+	</includes>
+	<layoutdefaults spacing="3" margin="6"/>
+	<layoutfunctions spacing="KDialog::spacingHint" margin="KDialog::marginHint"/>
+</UI>
diff --git a/kcontrol/hwmanager/devicepropsdlg.cpp b/kcontrol/hwmanager/devicepropsdlg.cpp
index b14177ca3..7ce36f1b3 100644
--- a/kcontrol/hwmanager/devicepropsdlg.cpp
+++ b/kcontrol/hwmanager/devicepropsdlg.cpp
@@ -32,14 +32,18 @@
 #undef Unsorted // Required for --enable-final (tqdir.h)
 #include <tqfiledialog.h>
 
+#include <kpassdlg.h>
 #include <kbuttonbox.h>
 #include <kcombobox.h>
 #include <tdelocale.h>
 #include <tdeapplication.h>
 #include <klineedit.h>
+#include <kpushbutton.h>
 #include <kstdguiitem.h>
 #include <tdemessagebox.h>
 
+#include "cryptpassworddlg.h"
+
 #include "devicepropsdlg.h"
 
 SensorDisplayLabelsWidget::SensorDisplayLabelsWidget(TQWidget *parent)
@@ -255,6 +259,7 @@ DevicePropertiesDialog::DevicePropertiesDialog(TDEGenericDevice* device, TQWidge
 		// Remove all non-applicable tabs
 		if (m_device->type() != TDEGenericDeviceType::Disk) {
 			base->tabBarWidget->removePage(base->tabDisk);
+			base->tabBarWidget->removePage(base->tabDiskCrypt);
 		}
 		if (m_device->type() != TDEGenericDeviceType::CPU) {
 			base->tabBarWidget->removePage(base->tabCPU);
@@ -291,8 +296,21 @@ DevicePropertiesDialog::DevicePropertiesDialog(TDEGenericDevice* device, TQWidge
 			connect(base->comboCPUGovernor, TQT_SIGNAL(activated(const TQString &)), this, TQT_SLOT(setCPUGovernor(const TQString &)));
 		}
 		if (m_device->type() == TDEGenericDeviceType::Disk) {
+			TDEStorageDevice* sdevice = static_cast<TDEStorageDevice*>(m_device);
 			connect(base->buttonDiskMount, TQT_SIGNAL(clicked()), this, TQT_SLOT(mountDisk()));
 			connect(base->buttonDiskUnmount, TQT_SIGNAL(clicked()), this, TQT_SLOT(unmountDisk()));
+			if (sdevice->isDiskOfType(TDEDiskDeviceType::LUKS)) {
+				connect(base->cryptLUKSAddKey, TQT_SIGNAL(clicked()), this, TQT_SLOT(cryptLUKSAddKey()));
+				connect(base->cryptLUKSDelKey, TQT_SIGNAL(clicked()), this, TQT_SLOT(cryptLUKSDelKey()));
+				connect(base->cryptLUKSKeySlotList, TQT_SIGNAL(selectionChanged()), this, TQT_SLOT(processLockouts()));
+				base->cryptLUKSKeySlotList->setAllColumnsShowFocus(true);
+				base->cryptLUKSKeySlotList->setFullWidth(true);
+				cryptLUKSPopulateList();
+				processLockouts();
+			}
+			else {
+				base->tabBarWidget->removePage(base->tabDiskCrypt);
+			}
 		}
 
 		if ((m_device->type() == TDEGenericDeviceType::OtherSensor) || (m_device->type() == TDEGenericDeviceType::ThermalSensor)) {
@@ -860,6 +878,103 @@ void DevicePropertiesDialog::unmountDisk() {
 	populateDeviceInformation();
 }
 
+void DevicePropertiesDialog::cryptLUKSAddKey() {
+	if (m_device->type() == TDEGenericDeviceType::Disk) {
+		TDEStorageDevice* sdevice = static_cast<TDEStorageDevice*>(m_device);
+
+		TQListViewItem* lvi = base->cryptLUKSKeySlotList->selectedItem();
+		if (lvi) {
+			TQByteArray new_password;
+			CryptPasswordDialog* passDlg = new CryptPasswordDialog(this, i18n("Enter the new LUKS password for key slot %1").arg(lvi->text(0)));
+			if (passDlg->exec() == TQDialog::Accepted) {
+				new_password = passDlg->password();
+				delete passDlg;
+				if (!sdevice->cryptOperationsUnlockPasswordSet()) {
+					TQCString password;
+					passDlg = new CryptPasswordDialog(this, i18n("Enter the LUKS device unlock password"));
+					if (passDlg->exec() == TQDialog::Accepted) {
+						sdevice->cryptSetOperationsUnlockPassword(passDlg->password());
+					}
+					delete passDlg;
+				}
+				if (sdevice->cryptOperationsUnlockPasswordSet()) {
+					if ((lvi->text(1) == sdevice->cryptKeySlotFriendlyName(TDELUKSKeySlotStatus::Inactive)) || (KMessageBox::warningYesNo(this, i18n("<qt><b>You are about to overwrite the key in key slot %1</b><br>This action cannot be undone<p>Are you sure you want to proceed?</qt>").arg(lvi->text(0)), i18n("Confirmation Required")) == KMessageBox::Yes)) {
+						if (sdevice->cryptAddKey(lvi->text(0).toUInt(), new_password) != TDELUKSResult::Success) {
+							sdevice->cryptClearOperationsUnlockPassword();
+							KMessageBox::error(this, i18n("<qt><b>Key write failed</b><br>Please check the LUKS password and try again</qt>"), i18n("Key write failure"));
+						}
+					}
+				}
+			}
+			else {
+				delete passDlg;
+			}
+		}
+	}
+
+	cryptLUKSPopulateList();
+}
+
+void DevicePropertiesDialog::cryptLUKSDelKey() {
+	if (m_device->type() == TDEGenericDeviceType::Disk) {
+		TDEStorageDevice* sdevice = static_cast<TDEStorageDevice*>(m_device);
+
+		TQListViewItem* lvi = base->cryptLUKSKeySlotList->selectedItem();
+		if (lvi) {
+			if (KMessageBox::warningYesNo(this, i18n("<qt><b>You are about to purge the key in key slot %1</b><br>This action cannot be undone<p>Are you sure you want to proceed?</qt>").arg(lvi->text(0)), i18n("Confirmation Required")) == KMessageBox::Yes) {
+				if (sdevice->cryptKeySlotStatus()[lvi->text(0).toUInt()] & TDELUKSKeySlotStatus::Last) {
+					if (KMessageBox::warningYesNo(this, i18n("<qt><b>You are about to purge the last active key from the device!</b><p>This action will render the contents of the encrypted device permanently inaccessable and cannot be undone<p>Are you sure you want to proceed?</qt>"), i18n("Confirmation Required")) != KMessageBox::Yes) {
+						cryptLUKSPopulateList();
+						return;
+					}
+				}
+				if (sdevice->cryptDelKey(lvi->text(0).toUInt()) != TDELUKSResult::Success) {
+					sdevice->cryptClearOperationsUnlockPassword();
+					KMessageBox::error(this, i18n("<qt><b>Key purge failed</b><br>The key in key slot %1 is still active</qt>").arg(lvi->text(0)), i18n("Key purge failure"));
+				}
+			}
+		}
+	}
+
+	cryptLUKSPopulateList();
+}
+
+void DevicePropertiesDialog::cryptLUKSPopulateList() {
+	unsigned int i;
+	TDEStorageDevice* sdevice = static_cast<TDEStorageDevice*>(m_device);
+
+	base->cryptLUKSKeySlotList->clear();
+	unsigned int count = sdevice->cryptKeySlotCount();
+	TDELUKSKeySlotStatusList status = sdevice->cryptKeySlotStatus();
+	for (i = 0; i < count; i++) {
+		new TQListViewItem(base->cryptLUKSKeySlotList, TQString("%1").arg(i), sdevice->cryptKeySlotFriendlyName(status[i]));
+	}
+
+	processLockouts();
+}
+
+void DevicePropertiesDialog::processLockouts() {
+	if (m_device->type() == TDEGenericDeviceType::Disk) {
+		TDEStorageDevice* sdevice = static_cast<TDEStorageDevice*>(m_device);
+
+		TQListViewItem* lvi = base->cryptLUKSKeySlotList->selectedItem();
+		if (lvi) {
+			if (lvi->text(1) == sdevice->cryptKeySlotFriendlyName(TDELUKSKeySlotStatus::Active)) {
+				base->cryptLUKSAddKey->setEnabled(true);
+				base->cryptLUKSDelKey->setEnabled(true);
+			}
+			else {
+				base->cryptLUKSAddKey->setEnabled(true);
+				base->cryptLUKSDelKey->setEnabled(false);
+			}
+		}
+		else {
+			base->cryptLUKSAddKey->setEnabled(false);
+			base->cryptLUKSDelKey->setEnabled(false);
+		}
+	}
+}
+
 void DevicePropertiesDialog::virtual_hook( int id, void* data )
 { KDialogBase::virtual_hook( id, data ); }
 
diff --git a/kcontrol/hwmanager/devicepropsdlg.h b/kcontrol/hwmanager/devicepropsdlg.h
index 0b8553c96..e958d39ba 100644
--- a/kcontrol/hwmanager/devicepropsdlg.h
+++ b/kcontrol/hwmanager/devicepropsdlg.h
@@ -191,10 +191,16 @@ private slots:
 	void mountDisk();
 	void unmountDisk();
 
+	void cryptLUKSAddKey();
+	void cryptLUKSDelKey();
+	void cryptLUKSPopulateList();
+
 	void cryptographicCardInserted();
 	void cryptographicCardRemoved();
 	void updateCryptographicCardStatusDisplay();
 
+	void processLockouts();
+
 private:
 	TDEGenericDevice* m_device;
 	DevicePropertiesDialogBase* base;
diff --git a/kcontrol/hwmanager/devicepropsdlgbase.ui b/kcontrol/hwmanager/devicepropsdlgbase.ui
index 1be078c43..de77d5f91 100644
--- a/kcontrol/hwmanager/devicepropsdlgbase.ui
+++ b/kcontrol/hwmanager/devicepropsdlgbase.ui
@@ -326,7 +326,7 @@
 					    <property name="name">
 						    <cstring>unnamed</cstring>
 					    </property>
-					    <widget class="TQPushButton" row="0" column="0" colspan="1">
+					    <widget class="KPushButton" row="0" column="0" colspan="1">
 						    <property name="name">
 							    <cstring>buttonDiskMount</cstring>
 						    </property>
@@ -334,7 +334,7 @@
 							    <string>Mount</string>
 						    </property>
 					    </widget>
-					    <widget class="TQPushButton" row="0" column="1" colspan="1">
+					    <widget class="KPushButton" row="0" column="1" colspan="1">
 						    <property name="name">
 							    <cstring>buttonDiskUnmount</cstring>
 						    </property>
@@ -365,6 +365,95 @@
             </widget>
 	    <widget class="TQWidget">
 		    <property name="name">
+			    <cstring>tabDiskCrypt</cstring>
+		    </property>
+		    <attribute name="title">
+			    <string>LUKS</string>
+		    </attribute>
+		    <grid>
+			    <property name="name">
+				    <cstring>unnamed</cstring>
+			    </property>
+			    <widget class="TQGroupBox" row="0" column="0">
+				    <property name="name">
+					    <cstring>groupLUKSProps</cstring>
+				    </property>
+				    <property name="title">
+					    <string>LUKS Information</string>
+				    </property>
+				    <grid>
+					<property name="name">
+						<cstring>unnamed</cstring>
+					</property>
+					<widget class="TDEListView" row="0" column="0" colspan="2">
+						<column>
+							<property name="text">
+								<string>Slot Number</string>
+							</property>
+							<property name="clickable">
+								<bool>true</bool>
+							</property>
+							<property name="resizeable">
+								<bool>true</bool>
+							</property>
+						</column>
+						<column>
+							<property name="text">
+								<string>Status</string>
+							</property>
+							<property name="clickable">
+								<bool>true</bool>
+							</property>
+							<property name="resizeable">
+								<bool>true</bool>
+							</property>
+						</column>
+						<property name="name">
+							<cstring>cryptLUKSKeySlotList</cstring>
+						</property>
+						<property name="rootIsDecorated">
+							<bool>false</bool>
+						</property>
+					</widget>
+					<widget class="KPushButton" row="1" column="0" colspan="1">
+						<property name="name">
+							<cstring>cryptLUKSAddKey</cstring>
+						</property>
+						<property name="text">
+							<string>Install new password into keyslot</string>
+						</property>
+					</widget>
+					<widget class="KPushButton" row="1" column="1" colspan="1">
+						<property name="name">
+							<cstring>cryptLUKSDelKey</cstring>
+						</property>
+						<property name="text">
+							<string>Delete existing password from keyslot</string>
+						</property>
+					</widget>
+				    </grid>
+			    </widget>
+			    <spacer row="8" column="0">
+				    <property name="name" stdset="0">
+					    <cstring>Spacer4</cstring>
+				    </property>
+				    <property name="orientation">
+					    <enum>Vertical</enum>
+				    </property>
+				    <property name="sizeType">
+					    <enum>Expanding</enum>
+				    </property>
+				    <property name="sizeHint">
+					    <size>
+						    <width>20</width>
+						    <height>20</height>
+					    </size>
+				    </property>
+			    </spacer>
+		    </grid>
+            </widget>
+	    <widget class="TQWidget">
+		    <property name="name">
 			    <cstring>tabCPU</cstring>
 		    </property>
 		    <attribute name="title">