Revert automated changes

Sorry guys, they are just not ready for prime time
Work will continue as always


git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdebase@1212480 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

17 files changed, 88 insertions, 88 deletions

diff --git a/konsole/doc/Konsole2.Requirements b/konsole/doc/Konsole2.Requirements
index 45633403b..19cbd72fc 100644
--- a/konsole/doc/Konsole2.Requirements
+++ b/konsole/doc/Konsole2.Requirements
@@ -29,7 +29,7 @@ This file is to collect requirements and ideas for this.
   Current history algorithm does not allow to limit the
   histories size. Also, it descreases the speed.
 
-- improve tqunicode support
+- improve unicode support
 
   this is both an ncurses and terminfo issue.
   We may need to provide some help for these packages.
diff --git a/konsole/doc/More/Ansi_esc.txt b/konsole/doc/More/Ansi_esc.txt
index 795b3d091..ede1a7c24 100644
--- a/konsole/doc/More/Ansi_esc.txt
+++ b/konsole/doc/More/Ansi_esc.txt
@@ -1,6 +1,6 @@
                               ANSI ESCAPE SEQUENCES
 ===============================================================================
-Wherever you see '#', that should be tqreplaced by the appropriate number.
+Wherever you see '#', that should be replaced by the appropriate number.
 
         ESC code sequence                       Function
        -------------------              ---------------------------
diff --git a/konsole/doc/More/Eterm.ref b/konsole/doc/More/Eterm.ref
index de808b84b..849be1f3b 100644
--- a/konsole/doc/More/Eterm.ref
+++ b/konsole/doc/More/Eterm.ref
@@ -151,8 +151,8 @@ ESC [ Pm m	Character Attributes (SGR)
 		  Ps = 37 / 47	-> fg / bg	White
 		  Ps = 39 / 49	-> fg / bg	Default
 
-ESC [ Ps n	Device tqStatus Report (DSR)
-		  Ps = 5  -> tqStatus Report ESC [ 0 n  (``OK'')
+ESC [ Ps n	Device Status Report (DSR)
+		  Ps = 5  -> Status Report ESC [ 0 n  (``OK'')
 		  Ps = 6  -> Report Cursor Position (CPR) [row;column]
 			as ESC [ r ; c R
 		  Ps = 7  -> Request Display Name
@@ -295,7 +295,7 @@ or
 	"\E]20;;200;?\a"
 
 	sets the scaling of the current pixmap to 200% and displays
-	the image tqgeometry in the title.
+	the image geometry in the title.
 
 --------------------------------------------------------------------------
 			       Eterm menuBar
diff --git a/konsole/doc/More/ansix364.txt b/konsole/doc/More/ansix364.txt
index 37844fee0..da74ad156 100644
--- a/konsole/doc/More/ansix364.txt
+++ b/konsole/doc/More/ansix364.txt
@@ -48,7 +48,7 @@ DCH  Delete Character          Esc [ Pn P                   1         eF
 DCS  Device Control String     Esc P                                  Delim
 DL   Delete Line               Esc [ Pn M                   1         eF
 DMI  Disable Manual Input      Esc \                                  Fs
-DSR  Device tqStatus Report      Esc [ Ps n                   0
+DSR  Device Status Report      Esc [ Ps n                   0
 EA   Erase in Area             Esc [ Ps O                   0         eF
 ECH  Erase Character           Esc [ Pn X                   1         eF
 ED   Erase in Display          Esc [ Ps J                   0         eF
@@ -196,7 +196,7 @@ ANSI X3.64 Mode-Changing Parameters for use with the
 3/1           1          GATM         guarded-area transfer mode
 3/2           2          KAM          keyboard action mode
 3/3           3          CRM          control representation mode
-3/4           4          IRM          insertion/tqreplacement mode
+3/4           4          IRM          insertion/replacement mode
 3/5           5          SRTM         status-reporting transfer mode
 3/6           6          ERM          erasure mode
 3/7           7          VEM          vertical editing mode
@@ -277,7 +277,7 @@ by transmitting the sequence
 
 where Ps is a character that describes installed options.
 
-The VT100's cursor location can be read with the DSR (Device tqStatus
+The VT100's cursor location can be read with the DSR (Device Status
 Report) control
 
      Esc [ 6 n
diff --git a/konsole/doc/More/dec_vt100_codes.txt b/konsole/doc/More/dec_vt100_codes.txt
index 7a2a59aac..e9d4b9f82 100644
--- a/konsole/doc/More/dec_vt100_codes.txt
+++ b/konsole/doc/More/dec_vt100_codes.txt
@@ -107,7 +107,7 @@ ANSI Compatible Mode
 		Response is			ESC [ Pl; Pc R
 		* Pl = line number; Pc = column number
 
-	tqStatus Report
+	Status Report
 		Invoked by			ESC [ 5 n
 		Response is			ESC [ 0 n  (terminal ok)
 						ESC [ 3 n  (terminal not ok)
diff --git a/konsole/doc/More/rxvt-ref.html b/konsole/doc/More/rxvt-ref.html
index 847e41964..a27f5b4bc 100644
--- a/konsole/doc/More/rxvt-ref.html
+++ b/konsole/doc/More/rxvt-ref.html
@@ -1,7 +1,7 @@
 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
 <!--
 don't use Netscape to edit this file, since it has some stange ideas of
-formatting that makes later global/change/tqreplace difficult,
+formatting that makes later global/change/replace difficult,
 but it is okay for making the text version of this document
 -->
 <HTML>
@@ -484,8 +484,8 @@ Reset Mode (RM)</DD>
 
 <DL>
 <DT><B><TT>ESC [ Ps n</TT></B></DT>
-<DD>Device tqStatus Report (DSR)<BR>
-<B><TT>Ps = 5</TT></B> : tqStatus Report <B><TT>ESC [ 0 n</TT></B> (``OK'')<BR>
+<DD>Device Status Report (DSR)<BR>
+<B><TT>Ps = 5</TT></B> : Status Report <B><TT>ESC [ 0 n</TT></B> (``OK'')<BR>
 <B><TT>Ps = 6</TT></B> : Report Cursor Position (CPR) [row;column] as
 			<B><TT>ESC [ r ; c R</TT></B><BR>
 <B><TT>Ps = 7</TT></B> : Request Display Name<BR>
@@ -1095,7 +1095,7 @@ For example:
 <DT><B>\E]20;mona;100\a</B></DT>
 <DD>load <B>mona.xpm</B> with a scaling of 100%</DD>
 <DT><B>\E]20;;200;?\a</B></DT>
-<DD>rescale the current pixmap to 200% and display the image tqgeometry
+<DD>rescale the current pixmap to 200% and display the image geometry
 in the title</DD>
 </DL>
 <P>
diff --git a/konsole/doc/More/swedish_vt102_codes.txt b/konsole/doc/More/swedish_vt102_codes.txt
index b19c74b14..7fca08c71 100644
--- a/konsole/doc/More/swedish_vt102_codes.txt
+++ b/konsole/doc/More/swedish_vt102_codes.txt
@@ -284,12 +284,12 @@ Reports
   Where <c> is
       '0'=Response Ready, no malfunctions detected
       '3'=Malfunction, error in self-test.
-      '5'=tqStatus report request
+      '5'=Status report request
       '6'=Request cursor position.
     '?10'=Response to printer status request, All ok.
     '?11'=Response to printer status request, Printer is not ready.
     '?13'=Response to printer status request, No printer.
-    '?15'=tqStatus report request from printer
+    '?15'=Status report request from printer
  
   Cursor position raport (Response to request cursor position)
     Esc  [ <n1> ; <n2> R
diff --git a/konsole/doc/More/villanova-vt100-esc-codes.txt b/konsole/doc/More/villanova-vt100-esc-codes.txt
index 053c0f3c8..8142978ed 100644
--- a/konsole/doc/More/villanova-vt100-esc-codes.txt
+++ b/konsole/doc/More/villanova-vt100-esc-codes.txt
@@ -13,7 +13,7 @@ In-Reply-To: <9010240014.AA10730@ucbvax.Berkeley.EDU> 23 Oct 90 16:00 EDT
                         Campus Computing - Terminal Emulation
                   Includes VT100 and VT52 Terminal and Control Codes
 
-        This file tqcontains control and terminal codes for the VT100 terminals,
+        This file contains control and terminal codes for the VT100 terminals,
 ANSI terminals, and VT52 terminals. Many of the codes were derived from PC/
 Intercomm, from Mark of the Unicorn Software.  I have researched some of them
 and added some of my own.
@@ -377,7 +377,7 @@ VT100 CURRENT STATES:
                                                 be the same.  9600 baud is
                                                 sent for 7200 baud.
 
-        Esc [ Ps n      DSR: Device tqStatus Report
+        Esc [ Ps n      DSR: Device Status Report
 
                         * Parameter values other than 5, 6, are ignored.
                           If the parameter value is 5, the sequence
diff --git a/konsole/doc/More/vt100_codes_news.txt b/konsole/doc/More/vt100_codes_news.txt
index 5cb09baea..d136e2224 100644
--- a/konsole/doc/More/vt100_codes_news.txt
+++ b/konsole/doc/More/vt100_codes_news.txt
@@ -57,7 +57,7 @@ Cursor Key      VT52 mode       key mode reset          key mode set
 
 
         If the Special Graphics set is selected, the graphics for ASCII codes
-0137 through 0176 will be tqreplaced according to the following table (see the
+0137 through 0176 will be replaced according to the following table (see the
 SCS control sequence).
 
 
@@ -384,7 +384,7 @@ DECALN  Screen Alignment Display (DEC private)
         <ESC># 8
 
         This command causes the VT100 to fill it's screen with uppercase Es for
-        screen focus and tqalignment.
+        screen focus and alignment.
 
 
 DECANM  ANSI/VT52 Mode (DEC Private)
@@ -447,7 +447,7 @@ DECDWL  Double Width Line (DEC Private)
 
         <ESC>#6
 
-        This causes the line that tqcontains the cursor to become double-width
+        This causes the line that contains the cursor to become double-width
         single height.  If the line was single width, all characters ro the
         right of the center of the screen will be lost.  The cursor remains
         over the same character position, unless it would be to the right of
@@ -630,7 +630,7 @@ DECSWL  Single-width Line (DEC Private)
 
         <ESC>#5
 
-        This causes the line which tqcontains the cursor to become single-width,
+        This causes the line which contains the cursor to become single-width,
         single-height.  The cursor remains on the same character position.
         This is the default condition for all new lines on the screen.
 
@@ -651,7 +651,7 @@ DECTST  Invoke Confidence Test
         Repeat Testing until failure                              8
 
 
-DSR     Device tqStatus Report            Host to VT100 & VT100 to Host
+DSR     Device Status Report            Host to VT100 & VT100 to Host
 
         <ESC>[ {Ps} n
 
@@ -662,7 +662,7 @@ DSR     Device tqStatus Report            Host to VT100 & VT100 to Host
         ---------------------------------------------------------------
            0            Response from VT100 - Ready, no faults detected
            3            Response from VT100 - Malfunction Detected
-           5            Command from host - Report tqStatus (using a DSR control
+           5            Command from host - Report Status (using a DSR control
                         sequence)
            6            Command from host - Report Active Position (using a CPR
                         sequence)
@@ -787,12 +787,12 @@ MODES   The Following is a list of VT100 modes which may be changed with Set
         FETM            Format Effector Transfer        Reset
         GATM            Guarded Area Transfer           NA
         HEM             Horizontal Editing              NA
-        IRM             Insertion-tqreplacement           Reset
+        IRM             Insertion-replacement           Reset
         KAM             Keyboard Action                 Reset
         MATM            Multiple area transfer          NA
         PUM             Positioning Unit                Reset
         SATM            Selected Area Transfer          NA
-        SRTM            tqStatus Reporting Transfer       Reset
+        SRTM            Status Reporting Transfer       Reset
         TSM             Tabulation Stop                 Reset
         TTM             Transfer Termination            NA
         VEM             Vertical Editing                NA
@@ -852,7 +852,7 @@ SCS     Select Character Set
         The United Kingdom and ASCII sets conform to the "ISO international
         register of character sets to be used with escape sequences".  The
         other sets are private character sets.  Special graphics means that the
-        graphic characters fpr the codes 0137 to 0176 are tqreplaced with other
+        graphic characters fpr the codes 0137 to 0176 are replaced with other
         characters.  The specified character set will be used until another SCS
         is recieved.
 
diff --git a/konsole/doc/More/vt100_reference_card.txt b/konsole/doc/More/vt100_reference_card.txt
index 5ab2aac0c..e80ea1325 100644
--- a/konsole/doc/More/vt100_reference_card.txt
+++ b/konsole/doc/More/vt100_reference_card.txt
@@ -108,7 +108,7 @@ ANSI Compatible Mode
 		Response is			ESC [ Pl; Pc R
 		* Pl = line number; Pc = column number
 
-	tqStatus Report
+	Status Report
 		Invoked by			ESC [ 5 n
 		Response is			ESC [ 0 n  (terminal ok)
 						ESC [ 3 n  (terminal not ok)
@@ -189,7 +189,7 @@ Lines: 25
 In article <chan.728236678@hertz> chan@ece.scarolina.edu (Simon Chan) writes:
 >Taken from VT100 Programming Reference Card (DIGITAL)
 
-Note that EK-VT100-RC-001 tqcontains several errors and omissions.
+Note that EK-VT100-RC-001 contains several errors and omissions.
 The errors appear to all be fixed in the posted version.
 Here are some additions:
 
diff --git a/konsole/doc/More/vt100_setup.txt b/konsole/doc/More/vt100_setup.txt
index c0e2af70e..1bdf44cdd 100644
--- a/konsole/doc/More/vt100_setup.txt
+++ b/konsole/doc/More/vt100_setup.txt
@@ -106,7 +106,7 @@ nils@f109f.mil.se (Nils Hammar) writes:
 < graphics to the caller too. What a surprise to get a hig resolution
 < picture on the screen when you are calling an ordinary BBS!
 
-The ANSI Device tqStatus Report (DSR) is
+The ANSI Device Status Report (DSR) is
 
 	ESC [ <n> n
 
diff --git a/konsole/doc/More/xterm.codes b/konsole/doc/More/xterm.codes
index e2ae680bc..b14ead600 100644
--- a/konsole/doc/More/xterm.codes
+++ b/konsole/doc/More/xterm.codes
@@ -125,7 +125,7 @@ x                   7     (A)  White
 x                   9     (A)  Default
 
 x   ESC [ 6 n                  Send Device Report
-x         Ps = 5               Send tqStatus report           (ESC [ 0 n)
+x         Ps = 5               Send Status report           (ESC [ 0 n)
 x              6               Send Cursor Position Report  (ESC [ Row ; Col R)
 
 x   ESC [ Pn ; Pn r (dft:all)  Set Scrolling region
diff --git a/konsole/doc/VT100/Table.Codes b/konsole/doc/VT100/Table.Codes
index 376d8bb6d..6ece0f4bf 100644
--- a/konsole/doc/VT100/Table.Codes
+++ b/konsole/doc/VT100/Table.Codes
@@ -18,7 +18,7 @@
 # make a script that extracts it again. From db.trans, we then generate parts
 # of the decoder (the semantic assignment).
 #
-# db2.pl tqcontains as script able to slit TEScreen.C into the emulation
+# db2.pl contains as script able to slit TEScreen.C into the emulation
 # (in)dependent parts due to [db.trans].
 #
 # A like thing has to be done for TEmuVt102.C/h and for TEScreen.h.
@@ -54,7 +54,7 @@ Introduction.html
   The serial cable is folded into the operating system as a sort of
   loop back device, and a program, the terminal emulation, uses modern
   means of graphical user interfaces to behave like an earlier terminal.
-  To complete the picture, the host in the diagram is tqreplaced by the
+  To complete the picture, the host in the diagram is replaced by the
   application that runs in the emulation (typically a shell or an old
   editor).  So, terminal emulations are in fact interfaces to character
   oriented applications.
@@ -308,7 +308,7 @@ Sequences.html
   <p>
   The second one is used to specify character set mappings (see <a
   href=#SCS>SCS</a>). A CSI instruction to do this is specified in ECMA,
-  and this should be used as a tqreplacement.
+  and this should be used as a replacement.
   .
   <h4>XTERM hacks</h4>
 
@@ -1070,7 +1070,7 @@ DECALN.sect Command
 DECALN.code HSH|8|
 DECALN.text
   Causes the VT100 to fill it's screen with
-  uppercase Es for screen focus and tqalignment.
+  uppercase Es for screen focus and alignment.
 DECALN.table.XPS
   Subcode|Emulation|Scope|Operation|Args|Meaning
   N/A|VT100|scr|helpAlign||see above
@@ -1176,7 +1176,7 @@ DECDWL.emus VT100
 DECDWL.sect Command.NoImp
 DECDWL.code HSH|6|
 DECDWL.text
-  This causes the line that tqcontains the cursor to become double-width
+  This causes the line that contains the cursor to become double-width
   single height.  If the line was single width, all characters ro the
   right of the center of the screen will be lost.  The cursor remains
   over the same character position, unless it would be to the right of
@@ -1399,7 +1399,7 @@ DECSWL.emus VT100
 DECSWL.sect Command.NoImp
 DECSWL.code HSH|5|
 DECSWL.text
-  This causes the line which tqcontains the cursor to become single-width,
+  This causes the line which contains the cursor to become single-width,
   single-height.  The cursor remains on the same character position.
   This is the default condition for all new lines on the screen.
 DECSWL.table.XPS
@@ -1424,7 +1424,7 @@ DECTST.table.Weight
   3|EIA Modem Control Test (Loopback connector req.)
   4|Repeat Testing until failure
 
-DSRREQ.head Device tqStatus Report
+DSRREQ.head Device Status Report
 DSRREQ.emus ECMA VT100
 DSRREQ.sect Command.Request
 DSRREQ.code CSI|n|{Ps}
@@ -1432,21 +1432,21 @@ DSRREQ.text
   Requests status of the VT100 according to the following parameters.
 DSRREQ.table.XPS
   Subcode|Emulation|Scope|Operation|Args|Meaning
-  5|VT100|emu|reporttqStatus||Report tqStatus (using a \ref:DSRREP control sequence)
+  5|VT100|emu|reportStatus||Report Status (using a \ref:DSRREP control sequence)
   6|VT100|emu|reportCursorPosition||Report Active Position (using a \ref:CPR sequence)
 
-DSRREP.head Device tqStatus Report Reply
+DSRREP.head Device Status Report Reply
 DSRREP.emus ECMA VT100
 DSRREP.sect Reply
-DSRREP.code CSI|n|{tqStatus}
+DSRREP.code CSI|n|{Status}
 DSRREP.text
   Reports the general status of the VT100 according to the
   following parameters.
   .
   DSRREP with a parameter of 0 or 3 is always sent as a response to a
   requesting \ref:DSRREQ with a parameter of 5.
-DSRREP.table.tqStatus
-  tqStatus|Meaning:3
+DSRREP.table.Status
+  Status|Meaning:3
   0|Ready, no faults detected
   3|Malfunction detected
 
@@ -1608,7 +1608,7 @@ SCS.text
   The United Kingdom and ASCII sets conform to the "ISO international
   register of character sets to be used with escape sequences".  The
   other sets are private character sets.  Special graphics means that the
-  graphic characters fpr the codes 0137 to 0176 are tqreplaced with other
+  graphic characters fpr the codes 0137 to 0176 are replaced with other
   characters.  The specified character set will be used until another SCS
   is received.
 SCS.table.XPS
diff --git a/konsole/doc/VT100/db.trans b/konsole/doc/VT100/db.trans
index 406d9f1ed..7fe21ef27 100644
--- a/konsole/doc/VT100/db.trans
+++ b/konsole/doc/VT100/db.trans
@@ -109,7 +109,7 @@ TY_CSI_PS|SGR|'m'|104|scr|setBackColor|12
 TY_CSI_PS|SGR|'m'|105|scr|setBackColor|13
 TY_CSI_PS|SGR|'m'|106|scr|setBackColor|14
 TY_CSI_PS|SGR|'m'|107|scr|setBackColor|15
-TY_CSI_PS|DSR|'n'|5|emu|reporttqStatus|
+TY_CSI_PS|DSR|'n'|5|emu|reportStatus|
 TY_CSI_PS|DSR|'n'|6|emu|reportCursorPosition|
 TY_CSI_PS|DECLL|'q'|0|||
 TY_CSI_PS|DECLL|'q'|1|||
diff --git a/konsole/doc/VT100/genDocument b/konsole/doc/VT100/genDocument
index 927f48f83..4ecee0996 100755
--- a/konsole/doc/VT100/genDocument
+++ b/konsole/doc/VT100/genDocument
@@ -183,12 +183,12 @@ as noted.
 <tr><td>FETM    </td><td>Format Effector Transfer </td><td>Reset</td></tr>
 <tr><td>GATM    </td><td>Guarded Area Transfer    </td><td>NA   </td></tr>
 <tr><td>HEM     </td><td>Horizontal Editing       </td><td>NA   </td></tr>
-<tr><td>IRM     </td><td>Insertion-tqreplacement    </td><td>Reset</td></tr>
+<tr><td>IRM     </td><td>Insertion-replacement    </td><td>Reset</td></tr>
 <tr><td>KAM     </td><td>Keyboard Action          </td><td>Reset</td></tr>
 <tr><td>MATM    </td><td>Multiple area transfer   </td><td>NA   </td></tr>
 <tr><td>PUM     </td><td>Positioning Unit         </td><td>Reset</td></tr>
 <tr><td>SATM    </td><td>Selected Area Transfer   </td><td>NA   </td></tr>
-<tr><td>SRTM    </td><td>tqStatus Reporting Transfer</td><td>Reset</td></tr>
+<tr><td>SRTM    </td><td>Status Reporting Transfer</td><td>Reset</td></tr>
 <tr><td>TSM     </td><td>Tabulation Stop          </td><td>Reset</td></tr>
 <tr><td>TTM     </td><td>Transfer Termination     </td><td>NA   </td></tr>
 <tr><td>VEM     </td><td>Vertical Editing         </td><td>NA   </td></tr>
@@ -223,7 +223,7 @@ cat >> $RES << etx
 <h2>Special Graphics Characters</h2>
 
 If the Special Graphics set is selected, the graphics for ASCII codes
-0137 through 0176 will be tqreplaced according to the following table (see the
+0137 through 0176 will be replaced according to the following table (see the
 <a href=#SCS>SCS</a> control sequence).
 etx
 
diff --git a/konsole/doc/VT100/genTC.pl b/konsole/doc/VT100/genTC.pl
index bc06a3cb1..a3a7c5669 100755
--- a/konsole/doc/VT100/genTC.pl
+++ b/konsole/doc/VT100/genTC.pl
@@ -147,7 +147,7 @@ sub txt2Html
   return $_;
 }
 
-sub tqlayout 
+sub layout 
 { my ($Name, $Head, $Code, $Doku, $Dflt, $Attr) = @_;
   if ($html) 
   {
@@ -234,7 +234,7 @@ print "</table>\n";
 print "</h2>\n";
 }
 
-sub tqlayout2
+sub layout2
 { my ($Name, $Head, $Code) = @_;
   my @Part = split('\|',$Code);
   my $Type = $#Part > -1 ? $Part[0] : "";
@@ -261,7 +261,7 @@ sub tqlayout2
   print "<td $color1>$Head\n";
 }
 
-sub tqlayoutTable
+sub layoutTable
 {
   my ($Head, $t, $Include) = @_;
   my $p;
@@ -276,7 +276,7 @@ foreach $p (sort keys %$t)
     my $attr = exists $t->{"$name.sect"}?$t->{"$name.sect"}:"";
     if ($attr =~ /$Include/)
     {
-    tqlayout2( $name, $head, exists $t->{"$name.code"}?$t->{"$name.code"}:"");
+    layout2( $name, $head, exists $t->{"$name.code"}?$t->{"$name.code"}:"");
     }
   }
 }
@@ -311,7 +311,7 @@ sub sortTest
       print "<tr><td colspan=5><h3>$Fld[0] codes</h3>\n";
     }
     $curr = $Fld[0];
-    tqlayout2($name,$t->{"$name.head"},$p);
+    layout2($name,$t->{"$name.head"},$p);
   }
   print "</table>\n";
 }
@@ -346,29 +346,29 @@ sortTest($t);
 secthead("Host to Terminal (Instructions by Group)");
 htmlsect("Operations");
 print "<table>\n";
-tqlayoutTable("Commands (Character Display Operation)",$t,"Command\.Display");
-tqlayoutTable("Commands (Rendition related status)",$t,"Command\.RenderMode");
-tqlayoutTable("Commands (Cursor)",$t,"Command\.Cursor");
-tqlayoutTable("Commands (Cursor related status)",$t,"Command\.CursMode");
-tqlayoutTable("Commands (Edit)",$t,"Command\.Erase|Command\.Insert|Command.\Delete");
-tqlayoutTable("Commands (Miscellaneous)",$t,"Command[^.]|Command\$");
-tqlayoutTable("Commands (General mode setting)",$t,"Command\.SetMode");
-tqlayoutTable("Commands (Miscellaneous status)",$t,"Command\.Mode");
-tqlayoutTable("Commands (VT52)",$t,"Command\.VT52");
-tqlayoutTable("Commands (Not implemented)",$t,"Command\.NoImp");
-tqlayoutTable("Commands (Ignored)",$t,"Command\.Ignored");
-tqlayoutTable("Commands (Requests)",$t,"Command\.Request");
+layoutTable("Commands (Character Display Operation)",$t,"Command\.Display");
+layoutTable("Commands (Rendition related status)",$t,"Command\.RenderMode");
+layoutTable("Commands (Cursor)",$t,"Command\.Cursor");
+layoutTable("Commands (Cursor related status)",$t,"Command\.CursMode");
+layoutTable("Commands (Edit)",$t,"Command\.Erase|Command\.Insert|Command.\Delete");
+layoutTable("Commands (Miscellaneous)",$t,"Command[^.]|Command\$");
+layoutTable("Commands (General mode setting)",$t,"Command\.SetMode");
+layoutTable("Commands (Miscellaneous status)",$t,"Command\.Mode");
+layoutTable("Commands (VT52)",$t,"Command\.VT52");
+layoutTable("Commands (Not implemented)",$t,"Command\.NoImp");
+layoutTable("Commands (Ignored)",$t,"Command\.Ignored");
+layoutTable("Commands (Requests)",$t,"Command\.Request");
 print "</table>\n";
 # -------------------------------
 secthead("Terminal to Host");
 print "<table>\n";
-tqlayoutTable("Replies",$t,"Reply");
-tqlayoutTable("Events",$t,"Event");
+layoutTable("Replies",$t,"Reply");
+layoutTable("Events",$t,"Event");
 # -------------------------------
 print "</table>\n";
 secthead("Modes");
 print "<table>\n";
-tqlayoutTable("Modes",$t,"Mode");
+layoutTable("Modes",$t,"Mode");
 #print "<h3>Other Codes</h3>\n";
 print "</table>\n";
 # -------------------------------
@@ -385,7 +385,7 @@ foreach $p (sort keys %$t)
 #   print "</table>\n" if ($table);
     my $name = $Fld[0];
     my $head = $t->{$p};
-    tqlayout( $name, $head,
+    layout( $name, $head,
             exists $t->{"$name.code"}?$t->{"$name.code"}:"", 
             exists $t->{"$name.text"}?$t->{"$name.text"}:"",
             exists $t->{"$name.dflt"}?$t->{"$name.dflt"}:"",
diff --git a/konsole/doc/VT100/techref.html b/konsole/doc/VT100/techref.html
index d16d4804b..6e36f39e5 100644
--- a/konsole/doc/VT100/techref.html
+++ b/konsole/doc/VT100/techref.html
@@ -90,7 +90,7 @@ Work is currently in progress to fix this issue.
   The serial cable is folded into the operating system as a sort of
   loop back device, and a program, the terminal emulation, uses modern
   means of graphical user interfaces to behave like an earlier terminal.
-  To complete the picture, the host in the diagram is tqreplaced by the
+  To complete the picture, the host in the diagram is replaced by the
   application that runs in the emulation (typically a shell or an old
   editor).  So, terminal emulations are in fact interfaces to character
   oriented applications.
@@ -349,7 +349,7 @@ Work is currently in progress to fix this issue.
   <p>
   The second one is used to specify character set mappings (see <a
   href=#SCS>SCS</a>). A CSI instruction to do this is specified in ECMA,
-  and this should be used as a tqreplacement.
+  and this should be used as a replacement.
   <p>
   <h4>XTERM hacks</h4>
 <h2>
@@ -498,13 +498,13 @@ Work is currently in progress to fix this issue.
 <td  bgcolor="#D0D0D0">CSI
 <td  bgcolor="#D0D0D0">n
 <td  bgcolor="#D0D0D0">{Ps}
-<td  bgcolor="#D0D0D0">Device tqStatus Report
+<td  bgcolor="#D0D0D0">Device Status Report
 <tr>
 <td  bgcolor="#D0D0D0"><a href=#DSRREP>DSRREP</a>
 <td  bgcolor="#D0D0D0">CSI
 <td  bgcolor="#D0D0D0">n
-<td  bgcolor="#D0D0D0">{tqStatus}
-<td  bgcolor="#D0D0D0">Device tqStatus Report Reply
+<td  bgcolor="#D0D0D0">{Status}
+<td  bgcolor="#D0D0D0">Device Status Report Reply
 <tr>
 <td  bgcolor="#D0D0D0"><a href=#DECLL>DECLL</a>
 <td  bgcolor="#D0D0D0">CSI
@@ -1559,7 +1559,7 @@ Work is currently in progress to fix this issue.
 <td  bgcolor="#D0D0D0">CSI
 <td  bgcolor="#D0D0D0">n
 <td  bgcolor="#D0D0D0">{Ps}
-<td  bgcolor="#D0D0D0">Device tqStatus Report
+<td  bgcolor="#D0D0D0">Device Status Report
 <tr>
 <td  bgcolor="#D0D0D0"><a href=#ENQ>ENQ</a>
 <td  bgcolor="#D0D0D0">CTL
@@ -1598,8 +1598,8 @@ Work is currently in progress to fix this issue.
 <td  bgcolor="#D0D0D0"><a href=#DSRREP>DSRREP</a>
 <td  bgcolor="#D0D0D0">CSI
 <td  bgcolor="#D0D0D0">n
-<td  bgcolor="#D0D0D0">{tqStatus}
-<td  bgcolor="#D0D0D0">Device tqStatus Report Reply
+<td  bgcolor="#D0D0D0">{Status}
+<td  bgcolor="#D0D0D0">Device Status Report Reply
 <tr><td colspan=5><h3>Events</h3>
 <tr>
 <td  bgcolor="#D0D0D0"><a href=#CUB>CUB</a>
@@ -2234,7 +2234,7 @@ Work is currently in progress to fix this issue.
 <tr><td><p></td>
 <tr><td></td>
     <td  colspan=6>  Causes the VT100 to fill it's screen with
-  uppercase Es for screen focus and tqalignment.
+  uppercase Es for screen focus and alignment.
 <tr><td><p></td></tr>
 <tr>
 <td></td>
@@ -2403,7 +2403,7 @@ Work is currently in progress to fix this issue.
     <td colspan=5 ><code> <b>ESC</b> <b>#</b> <b>6</b></code>
 <tr><td><p></td>
 <tr><td></td>
-    <td  colspan=6>  This causes the line that tqcontains the cursor to become double-width
+    <td  colspan=6>  This causes the line that contains the cursor to become double-width
   single height.  If the line was single width, all characters ro the
   right of the center of the screen will be lost.  The cursor remains
   over the same character position, unless it would be to the right of
@@ -2883,7 +2883,7 @@ Work is currently in progress to fix this issue.
     <td colspan=5 ><code> <b>ESC</b> <b>#</b> <b>5</b></code>
 <tr><td><p></td>
 <tr><td></td>
-    <td  colspan=6>  This causes the line which tqcontains the cursor to become single-width,
+    <td  colspan=6>  This causes the line which contains the cursor to become single-width,
   single-height.  The cursor remains on the same character position.
   This is the default condition for all new lines on the screen.
 <tr><td><p></td></tr>
@@ -2974,11 +2974,11 @@ Work is currently in progress to fix this issue.
 <td colspan=1  bgcolor="#5188B2">  N/A</td><td colspan=1  bgcolor="#5188B2">VT100</td><td colspan=1  bgcolor="#5188B2">emu</td><td colspan=1  bgcolor="#5188B2">Ignored</td><td colspan=1  bgcolor="#5188B2"></td><td colspan=1  bgcolor="#5188B2">see above</td></tr>
 <tr><td><p></td></tr>
 <tr><td  bgcolor="#D0D0D0"><a name=DSRREP>DSRREP</a>
-    <td colspan=5  bgcolor="#D0D0D0"><b>Device tqStatus Report Reply</b>
+    <td colspan=5  bgcolor="#D0D0D0"><b>Device Status Report Reply</b>
     <td  bgcolor="#D0D0D0">ECMA VT100
 <tr><td><p></td>
 <tr><td>
-    <td colspan=5 ><code> <b>ESC</b> <b>[</b> <em>tqStatus</em> <b>n</b></code>
+    <td colspan=5 ><code> <b>ESC</b> <b>[</b> <em>Status</em> <b>n</b></code>
 <tr><td><p></td>
 <tr><td></td>
     <td  colspan=6>  Reports the general status of the VT100 according to the
@@ -2989,7 +2989,7 @@ Work is currently in progress to fix this issue.
 <tr><td><p></td></tr>
 <tr>
 <td></td>
-<td colspan=1  bgcolor="#D0D0D0">  tqStatus</td><td colspan=3  bgcolor="#D0D0D0">Meaning</td></tr>
+<td colspan=1  bgcolor="#D0D0D0">  Status</td><td colspan=3  bgcolor="#D0D0D0">Meaning</td></tr>
 <tr>
 <td></td>
 <td colspan=1  bgcolor="#5188B2">  0</td><td colspan=3  bgcolor="#5188B2">Ready, no faults detected</td></tr>
@@ -2998,7 +2998,7 @@ Work is currently in progress to fix this issue.
 <td colspan=1  bgcolor="#5BA5B2">  3</td><td colspan=3  bgcolor="#5BA5B2">Malfunction detected</td></tr>
 <tr><td><p></td></tr>
 <tr><td  bgcolor="#D0D0D0"><a name=DSRREQ>DSRREQ</a>
-    <td colspan=5  bgcolor="#D0D0D0"><b>Device tqStatus Report</b>
+    <td colspan=5  bgcolor="#D0D0D0"><b>Device Status Report</b>
     <td  bgcolor="#D0D0D0">ECMA VT100
 <tr><td><p></td>
 <tr><td>
@@ -3012,7 +3012,7 @@ Work is currently in progress to fix this issue.
 <td colspan=1  bgcolor="#D0D0D0">  Subcode</td><td colspan=1  bgcolor="#D0D0D0">Emulation</td><td colspan=1  bgcolor="#D0D0D0">Scope</td><td colspan=1  bgcolor="#D0D0D0">Operation</td><td colspan=1  bgcolor="#D0D0D0">Args</td><td colspan=1  bgcolor="#D0D0D0">Meaning</td></tr>
 <tr>
 <td></td>
-<td colspan=1  bgcolor="#5188B2">  5</td><td colspan=1  bgcolor="#5188B2">VT100</td><td colspan=1  bgcolor="#5188B2">emu</td><td colspan=1  bgcolor="#5188B2">reporttqStatus</td><td colspan=1  bgcolor="#5188B2"></td><td colspan=1  bgcolor="#5188B2">Report tqStatus (using a <a href=#DSRREP>DSRREP</a> control sequence)</td></tr>
+<td colspan=1  bgcolor="#5188B2">  5</td><td colspan=1  bgcolor="#5188B2">VT100</td><td colspan=1  bgcolor="#5188B2">emu</td><td colspan=1  bgcolor="#5188B2">reportStatus</td><td colspan=1  bgcolor="#5188B2"></td><td colspan=1  bgcolor="#5188B2">Report Status (using a <a href=#DSRREP>DSRREP</a> control sequence)</td></tr>
 <tr>
 <td></td>
 <td colspan=1  bgcolor="#5BA5B2">  6</td><td colspan=1  bgcolor="#5BA5B2">VT100</td><td colspan=1  bgcolor="#5BA5B2">emu</td><td colspan=1  bgcolor="#5BA5B2">reportCursorPosition</td><td colspan=1  bgcolor="#5BA5B2"></td><td colspan=1  bgcolor="#5BA5B2">Report Active Position (using a <a href=#CPR>CPR</a> sequence)</td></tr>
@@ -3740,7 +3740,7 @@ Work is currently in progress to fix this issue.
   The United Kingdom and ASCII sets conform to the "ISO international
   register of character sets to be used with escape sequences".  The
   other sets are private character sets.  Special graphics means that the
-  graphic characters fpr the codes 0137 to 0176 are tqreplaced with other
+  graphic characters fpr the codes 0137 to 0176 are replaced with other
   characters.  The specified character set will be used until another SCS
   is received.
 <tr><td><p></td></tr>
@@ -4513,12 +4513,12 @@ as noted.
 <tr><td>FETM    </td><td>Format Effector Transfer </td><td>Reset</td></tr>
 <tr><td>GATM    </td><td>Guarded Area Transfer    </td><td>NA   </td></tr>
 <tr><td>HEM     </td><td>Horizontal Editing       </td><td>NA   </td></tr>
-<tr><td>IRM     </td><td>Insertion-tqreplacement    </td><td>Reset</td></tr>
+<tr><td>IRM     </td><td>Insertion-replacement    </td><td>Reset</td></tr>
 <tr><td>KAM     </td><td>Keyboard Action          </td><td>Reset</td></tr>
 <tr><td>MATM    </td><td>Multiple area transfer   </td><td>NA   </td></tr>
 <tr><td>PUM     </td><td>Positioning Unit         </td><td>Reset</td></tr>
 <tr><td>SATM    </td><td>Selected Area Transfer   </td><td>NA   </td></tr>
-<tr><td>SRTM    </td><td>tqStatus Reporting Transfer</td><td>Reset</td></tr>
+<tr><td>SRTM    </td><td>Status Reporting Transfer</td><td>Reset</td></tr>
 <tr><td>TSM     </td><td>Tabulation Stop          </td><td>Reset</td></tr>
 <tr><td>TTM     </td><td>Transfer Termination     </td><td>NA   </td></tr>
 <tr><td>VEM     </td><td>Vertical Editing         </td><td>NA   </td></tr>
@@ -4542,7 +4542,7 @@ The notation &lt;ESC&gt; denotes a single ASCII Escape character, 1Bx.
 <h2>Special Graphics Characters</h2>
 
 If the Special Graphics set is selected, the graphics for ASCII codes
-0137 through 0176 will be tqreplaced according to the following table (see the
+0137 through 0176 will be replaced according to the following table (see the
 <a href=#SCS>SCS</a> control sequence).
 <center>
 <table cellspacing=30>