summaryrefslogtreecommitdiffstats
path: root/konsole/doc/More/vt100_reference_card.txt
diff options
context:
space:
mode:
Diffstat (limited to 'konsole/doc/More/vt100_reference_card.txt')
-rw-r--r--konsole/doc/More/vt100_reference_card.txt215
1 files changed, 215 insertions, 0 deletions
diff --git a/konsole/doc/More/vt100_reference_card.txt b/konsole/doc/More/vt100_reference_card.txt
new file mode 100644
index 000000000..e80ea1325
--- /dev/null
+++ b/konsole/doc/More/vt100_reference_card.txt
@@ -0,0 +1,215 @@
+Article 248 of comp.terminals:
+Newsgroups: comp.terminals
+Path: cs.utk.edu!gatech!udel!bogus.sura.net!opusc!usceast!chan
+From: chan@ece.scarolina.edu (Simon Chan)
+Subject: VT100 Reference Card !! ( if you are looking for....)
+Message-ID: <chan.728236678@hertz>
+Keywords: vt100 terminal escape codes
+Sender: usenet@usceast.cs.scarolina.edu (USENET News System)
+Organization: USC Department of Computer Science
+Date: 28 Jan 93 15:57:58 GMT
+Lines: 162
+
+
+
+Taken from VT100 Programming Reference Card (DIGITAL)
+
+ANSI Compatible Mode
+
+ Cursor Movement Commands
+ Cursor up ESC [ Pn A
+ Cursor down ESC [ Pn B
+ Cursor forward (right) ESC [ Pn C
+ Cursor backward (left) ESC [ Pn D
+ Direct cursor addressing ESC [ Pl; Pc H or
+ ESC [ Pl; Pc f
+ Index ESC D
+ Next Line ESC E
+ Reverse index ESC M
+ Save cursor and attributes ESC 7
+ Restore cursor and attributes ESC 8
+ * Pn = decimal parameter in string of ASCII digits.(default 1)
+ * Pl = line number (default 0); Pc = column number (default 0)
+
+ Line Size (Double-Height and Double-Width) Commands
+ Change this line to double-height top half ESC # 3
+ Change this line to double-height bottom half ESC # 4
+ Change this line to single-width single-height ESC # 5
+ Change this line to double-width single-height ESC # 6
+
+ Character Attributes
+ ESC [ Ps;Ps;Ps;...,Ps m
+ Ps = 0 or None All Attributes Off
+ 1 Bold on
+ 4 Underscore on
+ 5 Blink on
+ 7 Reverse video on
+ Any other parameter values are ignored.
+
+ Erasing
+ From cursor to end of line ESC [ K or ESC [ 0 K
+ From beginning of line to cursor ESC [ 1 K
+ Entire line containing cursor ESC [ 2 K
+ From cursor to end of screen ESC [ J or ESC [ 0 J
+ From beginning of screen to cursor ESC [ 1 J
+ Entire screen ESC [ 2 J
+
+ Programmable LEDs
+ ESC [ Ps;Ps;...Ps q
+ Ps = 0 or None All LEDs Off
+ 1 L1 on
+ 2 L2 on
+ 3 L3 on
+ 4 L4 on
+ Any other parameter values are ignored.
+
+ Character Set (G0 and G1 Designators)
+ Charactor Set G0 Designator G1 Designator
+ United Kingdom (UK) ESC ( A ESC ) A
+ United States (USASCII) ESC ( B ESC ) B
+ Special graphics characters ESC ( 0 ESC ) 0
+ and line drawing set
+ Alternate character ROM ESC ( 1 ESC ) 1
+ Alternate character ROM ESC ( 2 ESC ) 2
+ special graphics characters
+
+ Scrolling Region
+ ESC [ Pt ; Pb r
+ Pt is the number of the top line of the scrolling region;
+ Pb is the number of the bottom line of the scrolling region
+ and must be greater than Pt.
+ (The default for Pt is line 1, the default for Pb is the end
+ of the screen)
+
+ TAB stops
+ Set tab at current column ESC H
+ Clear tab at curent column ESC [ g or ESC [ 0 g
+ Clear all tabs ESC [ 3 g
+
+ Modes
+ To Set To Reset
+ Mode Name Mode Sequence Mode Sequence
+ Line feed/new line New line ESC [20h Line feed ESC [20l
+ Cursor key mode Application ESC [?1h Cursor ESC [?l
+ ANSI/VT52 mode ANSI N/A VT52 ESC [?2l
+ Column mode 132 Col ESC [?3h 80 Col ESC [?3l
+ Scrolling mode Smooth ESC [?4h Jump ESC [?4l
+ Screen mode Reverse ESC [?5h Normal ESC [?5l
+ Origin mode Relative ESC [?6h Absolute ESC [?6l
+ Wraparound On ESC [?7h Off ESC [?7l
+ Auto repeat On ESC [?8h Off ESC [?8l
+ Interlace On ESC [?9h Off ESC [?9l
+ Graphic proc. option On ESC 1 Off ESC 2
+ Keypad mode Application ESC = Numeric ESC >
+
+ Reports
+ Cursor Position Report
+ Invoked by ESC [ 6 n
+ Response is ESC [ Pl; Pc R
+ * Pl = line number; Pc = column number
+
+ Status Report
+ Invoked by ESC [ 5 n
+ Response is ESC [ 0 n (terminal ok)
+ ESC [ 3 n (terminal not ok)
+
+ What Are You
+ Invoked by ESC [ c or ESC [ O c
+ Response is ESC [ ?1 ; Ps C
+ Ps = 0 Base VT100, no options
+ 1 Processor option (STP)
+ 2 Advanced Video option (AVO)
+ 3 AVO and STP
+ 4 Graphocs processor option (GO)
+ 5 GO and STP
+ 6 GO and AVO
+ 7 GO, STP, and AVO
+ Alternately invoked by ESC Z (not recommended.) Response is the same.
+
+ Reset
+ ESC c
+
+ Confidence Tests
+ Fill Screen with "Es" ESC # 8
+ Invoke Test(s) ESC [ 2 ; Ps y
+ Ps = 1 Power-up self test
+ (ROM checksum, RAM, NVR,
+ keyboard and AVO if installed)
+ 2(loop back connector required) Data Loop Back
+ 4(loop back connector required) ETA Modern Control Test
+ 8 Repeat selected test(s)
+ indefinitely
+ (until failure or power off)
+
+VT52 Compatible Mode
+ Cursor Up ESC A
+ Cursor Down ESC B
+ Cursor Right ESC C
+ Cursor Left ESC D
+ Select Special Graphics character set ESC F
+ Select ASCII character set ESC G
+ Cursor to home ESC H
+ Reverse line feed ESC I
+ Erase to end of screen ESC J
+ Erase to end of line ESC K
+ Direct cursor address ESC Ylc (see note 1)
+ Identify ESC Z (see note 2)
+ Enter alternate keypad mode ESC =
+ Exit alternate keypad mode ESC >
+ Enter ANSI mode ESC <
+
+ NOTE 1: Line and column numbers for direct cursor address are single
+ character codes whose values are the desired number plus
+ 37 (in Octal). Line and column numbers start at 1.
+ NOTE 2: Response to ESC Z is ESC / Z.
+
+
+
+-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+Simon Chan chan@ece.scarolina.edu
+Department of Electrical & Computer Engineering
+Swearingen Engineering Centre
+University of South Carolina
+Coulmbia, South Carolina 29208
+-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+
+Article 269 of comp.terminals:
+Path: cs.utk.edu!gatech!news.ans.net!cmcl2!adm!smoke!gwyn
+From: gwyn@smoke.brl.mil (Doug Gwyn)
+Newsgroups: comp.terminals
+Subject: Re: VT100 Reference Card !!
+Keywords: vt100 terminal escape codes
+Message-ID: <19629@smoke.brl.mil>
+Date: 1 Feb 93 15:01:49 GMT
+References: <chan.728236678@hertz>
+Organization: U.S. Army Ballistic Research Lab, APG MD.
+Lines: 25
+
+In article <chan.728236678@hertz> chan@ece.scarolina.edu (Simon Chan) writes:
+>Taken from VT100 Programming Reference Card (DIGITAL)
+
+Note that EK-VT100-RC-001 contains several errors and omissions.
+The errors appear to all be fixed in the posted version.
+Here are some additions:
+
+ Parameters to Direct cursor addressing can be omitted if 1.
+ "Index" is broken if NEWLINE is enabled (set-up).
+ "Reverse index" scrolls up retaining the same column.
+
+ CHARACTER SET DESIGNATORS: G0 = Shift-In, G1 = Shift-Out
+
+> ANSI/VT52 mode ANSI N/A VT52 ESC [?2l
+ ANSI/VT52 mode ANSI ESC < VT52 ESC [?2l
+ Modes can be combined using ";", for example "ESC [ ? 3 ; 4 ; 7 h"
+
+ CONFIDENCE TESTS: Parameter bits are summed into one parameter.
+
+ Hardcopy ESC # 7
+ Graphic processor ON ESC 1
+ Graphic processor OFF ESC 2
+
+The reference card showed incorrect graphics for octal code 140; its
+correct graphic is ` (accent grave).
+
+