diff options
Diffstat (limited to 'starttde')
| -rw-r--r-- | starttde | 109 |
1 files changed, 55 insertions, 54 deletions
@@ -3,9 +3,9 @@ # DEFAULT TRINITY STARTUP SCRIPT # -# This block may not be appropriate for all systems. +# This block might not be appropriate for all systems. # It should work for command line logins but graphical -# login managers may source these files already. +# login managers might already source these files. # Multiple sourcing is not a problem when the files are only # containers for environment variables and such. if [ -r /etc/xprofile ]; then @@ -60,12 +60,12 @@ if test -z "$XDM_MANAGED" || echo "$XDM_MANAGED" | grep ",auto" > /dev/null; the xsetroot -solid "#618DCC" # sky blue fi -# Unset this for Darwin since it will screw up TDE's dynamic-loading +# Unset this for Darwin since it will screw up TDE's dynamic-loading. unset DYLD_FORCE_FLAT_NAMESPACE -# Check whether prelinking is enabled. If so, exporting TDE_IS_PRELINKED improves +# Check whether prelinking is enabled. If yes, then exporting TDE_IS_PRELINKED improves # loading TDE. The $TDE_IS_PRELINKED variable might already be set on some systems -# through /etc/profile.d, so first check whether the variable exists. +# through /etc/profile.d. Therefore first check whether the variable exists. if [ "$TDE_IS_PRELINKED" = "" ]; then if [ -r /etc/default/prelink ]; then . /etc/default/prelink @@ -87,7 +87,7 @@ fi # * Then tdeinit starts kcminit. kcminit performs initialisation of # certain devices according to the user's settings # -# * Then ksmserver is started which takes control of the rest of the startup sequence +# * Then ksmserver is started which takes control of the rest of the startup sequence. # The user's personal TDE directory usually is $HOME/.trinity. # This setting may be overridden by setting $TDEHOME. When migrating profiles @@ -130,15 +130,6 @@ else echo "[starttde] Set TDEHOME to $TDEHOME." 1>&2 fi -# Do we want to run this script from here in such an automated manner? -# Or leave the script to be run only at the user's discretion? -# The migratekde3 script as written (in draft) requires user intervention, -# which to succeed in TDE needs something like KDialog. Refer to the -# commentary in migratekde3 for more details. -# if [ -x $TDEDIR/migratekde3 ]; then -# sh $TDEDIR/migratekde3 -# fi - # tdesu needs something to find root's TDE profile. Set the TDEROOTHOME variable # here as last resort. /root/.trinity is a safe presumption. If an admin wants # a different location then set the TDEROOTHOME variable elsewhere. @@ -296,7 +287,7 @@ if test -n "$kcminputrc_mouse_cursortheme" -o -n "$kcminputrc_mouse_cursorsize" fi if test "$kcmrandrrc_display_applyonstartup" = "true"; then - # 4 screens is hopefully enough + # 4 screens is hopefully enough. for scrn in 0 1 2 3; do args= width="\$kcmrandrrc_screen${scrn}_width" ; eval "width=$width" @@ -400,11 +391,10 @@ fi # (where <localprefix> is $TDEHOME or ~/.trinity, and <prefixes> is where TDE is installed) # # This is where you can define environment variables that will be available to -# all TDE programs, so this is where you can run agents using e.g. eval `ssh-agent` +# all TDE programs. That is where to run agents using for example, eval `ssh-agent` # or eval `gpg-agent --daemon`. -# Note: if you do that, you should also put "ssh-agent -k" as a shutdown script -# -# (see end of this file). +# Note: if you do that, you should also put "ssh-agent -k" as a shutdown script. +# (Read the end of this script for running shutdown scripts). # For anything else (that doesn't set env vars, or that needs a window manager), # better use the Autostart folder. @@ -428,15 +418,15 @@ done # preference to any other. # # The preference order looks like this: -# user override, system override, X, user, system +# user override, system override, X, user, system. # -# Where X is the original font database that was set up before this script -# runs. +# Where X is the original font database that was set up before this +# script runs. usr_odir=$HOME/.fonts/kde-override usr_fdir=$HOME/.fonts -# Add any user-installed font directories to the X font path +# Add any user-installed font directories to the X font path. tde_fontpaths=$usr_fdir/fontpaths do_usr_fdir=1 do_usr_odir=1 @@ -502,7 +492,7 @@ fi # add the user's dirs to the font path, as they might simply have been made # read-only by the administrator, for whatever reason. -# Only do usr_fdir and usr_odir if they are *not* listed in fontpaths +# Only do usr_fdir and usr_odir if they are *not* listed in fontpaths. if [ -e $sys_odir/fonts.dir ] then xset +fp "$sys_odir" @@ -524,7 +514,7 @@ xset fp rehash # xsetroot -cursor_name left_ptr -# Get Ghostscript to look into user's TDE fonts dir for additional Fontmap +# Get Ghostscript to look into user's TDE fonts dir for additional Fontmap. if test -n "$GS_LIB" ; then GS_LIB=$usr_fdir:$GS_LIB export GS_LIB @@ -533,7 +523,7 @@ else export GS_LIB fi -# Link "tmp" "socket" and "cache" resources to directory in $TMP +# Link "tmp" "socket" and "cache" resources to directory in $TMP. # Creates: # - a directory $TMP/tde-$USER and is linked from $TDEHOME/tmp-$HOSTNAME to it. # - a directory $TMP/tdesocket-$USER and is linked from $TDEHOME/socket-$HOSTNAME to it. @@ -551,9 +541,9 @@ done # In case of dcop sockets left by a previous session, cleanup. $TDEDIR/bin/dcopserver_shutdown -echo '[starttde] Starting Trinity...' 1>&2 +echo "[starttde] Starting Trinity..." 1>&2 -# Detect any running Xorg composition managers +# Detect any running Xorg composition managers. $TDEDIR/bin/kdetcompmgr # Run KPersonalizer before the session if this is the first login. @@ -561,12 +551,12 @@ if test "$kpersonalizerrc_general_firstlogin" = "true"; then if [ ! -x $TDEDIR/bin/kpersonalizer ]; then echo "[starttde] kpersonalizer not found! Please install in order to properly configure your user profile." 1>&2 else - # start only dcopserver, don't start whole tdeinit (takes too long) + # Start only dcopserver, don't start whole tdeinit (takes too long). echo "[starttde] Running kpersonalizer..." 1>&2 $TDEDIR/bin/dcopserver $TDEDIR/bin/twin --lock & $TDEDIR/bin/kpersonalizer --before-session - # handle kpersonalizer restarts (language change) + # Handle kpersonalizer restarts (language change). while test $? -eq 1; do $TDEDIR/bin/kpersonalizer --r --before-session done @@ -583,14 +573,14 @@ if [ -d $tdehome/share/apps/ksplash/cache/Moodin/kubuntu ]; then fi if test -z "$dl"; then - # the splashscreen and progress indicator + # The splashscreen and progress indicator. case "$ksplashrc_ksplash_theme" in None) - ;; # nothing + ;; # Nothing. Simple) if test "$kpersonalizerrc_general_firstlogin" = "true"; then $TDEDIR/bin/ksplashsimple - fi # otherwise started earlier + fi # Otherwise started earlier. ;; *) $TDEDIR/bin/ksplash --nodcop @@ -598,12 +588,12 @@ if test -z "$dl"; then esac fi -# Mark that full TDE session is running (e.g. Konqueror preloading works only +# Mark that full TDE session is running (for example, Konqueror preloading works only # with full TDE running). The TDE_FULL_SESSION property can be detected by # any X client connected to the same X session, even if not launched -# directly from the TDE session but e.g. using "ssh -X", tdesu. $TDE_FULL_SESSION +# directly from the TDE session but for example, using "ssh -X", tdesu. $TDE_FULL_SESSION # however guarantees that the application is launched in the same environment -# like the TDE session and that e.g. TDE utilities/libraries are available. +# like the TDE session and that for example, TDE utilities/libraries are available. # The matching tests are: # For $TDE_FULL_SESSION: # if test -n "$TDE_FULL_SESSION"; then ... whatever @@ -628,7 +618,7 @@ echo "[starttde] TDE_SESSION_UID: $TDE_SESSION_UID" 1>&2 LD_BIND_NOW=true $TDEDIR/bin/start_tdeinit_wrapper --new-startup +kcminit_startup if test $? -ne 0; then # Startup error - echo '[starttde] Could not start tdeinit. Check your installation.' 1>&2 + echo "[starttde] Could not start tdeinit. Check your installation." 1>&2 xmessage -center -geometry 500x100 "Could not start tdeinit. Check your installation." fi echo "[starttde] tdeinit started successfully." 1>&2 @@ -647,40 +637,52 @@ fi # Finally, give the session control to the session manager. # See tdebase/ksmserver for the description of the rest of the startup sequence. -# If the TDEWM environment variable has been set, then it will be used as Trinity's +# When set, the TDEWM environment variable will be used as Trinity's # window manager instead of twin. -# If TDEWM is not set, ksmserver will ensure twin is started. -# kwrapper is used to reduce startup time and memory usage -# kwrapper does not return usefull error codes such as the exit code of ksmserver. -# We only check for 255 which means that the ksmserver process could not be -# started, any problems thereafter, e.g. ksmserver failing to initialize, +# When TDEWM is not set, ksmserver will ensure twin is started. +# kwrapper is used to reduce startup time and memory usage. +# kwrapper does not return useful error codes such as the exit code of ksmserver. +# We only check for 255, which means the ksmserver process could not be +# started. Any problems thereafter, for example, ksmserver failing to initialize, # will remain undetected. +# tdeinit_phase1 is still experimental. $TDEDIR/bin/tdeinit_phase1 -if test $? -eq 255; then +EXIT_CODE="$?" +# If tdeinit_phase1 should cause problems, here is the old way: +# test -n "$TDEWM" && TDEWM="--windowmanager $TDEWM" +# $TDEDIR/bin/kwrapper $TDEDIR/bin/ksmserver $TDEWM +# EXIT_CODE="$?" +if test $EXIT_CODE -eq 255; then # Startup error - echo '[starttde] An error was detected while attempting to load the session manager via tdeinit_phase1. Please check your installation for problems.' 1>&2 - xmessage -center -geometry 500x100 "An error was detected while attempting to load the session manager via tdeinit_phase1. Please check your installation for problems." + echo "[starttde] An error was detected while attempting to load the session manager. Please check your installation for problems." 1>&2 + xmessage -center -geometry 500x100 "An error was detected while attempting to load the session manager. Please check your installation for problems." fi -# wait if there's any crashhandler shown +# Wait if there's any crashhandler shown. while $TDEDIR/bin/dcop | grep -q ^drkonqi- ; do sleep 5 done -echo '[starttde] Shutting down Trinity...' 1>&2 +echo "[starttde] Shutting down Trinity..." 1>&2 -# Clean up +# Clean up. $TDEDIR/bin/tdeinit_shutdown $TDEDIR/bin/dcopserver_shutdown --wait $TDEDIR/bin/artsshell -q terminate -# KDE4 support +# KDE4 support. if [ -f /usr/bin/kdeinit4_shutdown ]; then /usr/bin/kde4 kdeinit4_shutdown 2>/dev/null fi -echo '[starttde] Running Trinity shutdown scripts...' 1>&2 +echo "[starttde] Running Trinity shutdown scripts..." 1>&2 -# Run scripts found in $TDEDIRS/shutdown +# Run scripts found in shutdown directories. Those locations are: +# * $TDEHOME/shutdown +# * $PREFIX/shutdown +# * $TDEDIRS/shutdown ($TDEDIRS, not $TDEDIR) +# Presumed is $TDEDIRS/bin exists. Create $TDEDIRS/bin even when +# only using the shutdown directory or this snippet will fail to find +# that shutdown directory. for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/shutdown/,p'`; do for file in `ls "$prefix" 2> /dev/null | egrep -v '(~|\.bak)$'`; do if [ -x "${prefix}${file}" ]; then @@ -694,5 +696,4 @@ unset TDE_FULL_SESSION xprop -root -remove TDE_FULL_SESSION unset TDE_SESSION_UID -# Initialize_Status_Header echo "[starttde] Trinity shutdown complete." 1>&2 |